Adds support of IRDA transceiver residing on PowerQUICC processors and
enabling such on mpc885ads reference board. The driver is implemented
using of_device concept, hereby implies arch/powerpc support of the target.
Signed-off-by: Vitaly Bordug <[email protected]>
---
arch/powerpc/Kconfig | 1
arch/powerpc/boot/dts/mpc885ads.dts | 10
arch/powerpc/platforms/8xx/mpc885ads_setup.c | 39 +
arch/powerpc/sysdev/fsl_soc.c | 58 ++
drivers/net/irda/Kconfig | 4
drivers/net/irda/Makefile | 1
drivers/net/irda/m8xx-sir.c | 715 ++++++++++++++++++++++++++
include/asm-ppc/commproc.h | 67 ++
8 files changed, 895 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a8e08f4..c283907 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -605,6 +605,7 @@ endmenu
config ISA_DMA_API
bool
default y
+ depends on !PPC_8xx
menu "Bus options"
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index 110bf61..95b280c 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -178,6 +178,16 @@
interrupt-parent = <930>;
phy-handle = <e8002>;
};
+
+ scc@a20 {
+ device_type = "network";
+ compatible = "fsl,irda";
+ model = "SCC";
+ device-id = <2>;
+ reg = <a20 18 3d00 80>;
+ interrupts = <1d 3>;
+ interrupt-parent = <930>;
+ };
};
};
};
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index a57b577..8611318 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -50,6 +50,7 @@ extern unsigned int mpc8xx_get_irq(void);
static void init_smc1_uart_ioports(struct fs_uart_platform_info* fpi);
static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi);
static void init_scc3_ioports(struct fs_platform_info* ptr);
+static void init_irda_ioports(void);
void __init mpc885ads_board_setup(void)
{
@@ -115,6 +116,10 @@ void __init mpc885ads_board_setup(void)
immr_unmap(io_port);
#endif
+
+#ifdef CONFIG_8XX_SIR
+ init_irda_ioports();
+#endif
}
@@ -322,6 +327,40 @@ void init_smc_ioports(struct fs_uart_platform_info *data)
}
}
+static void init_irda_ioports()
+{
+ iop8xx_t *io_port;
+ cpm8xx_t *cp;
+ unsigned *bcsr_io;
+
+ bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+ if (bcsr_io == NULL) {
+ printk(KERN_CRIT "Could not remap BCSR1\n");
+ return;
+ }
+
+ /* Enable the IRDA. */
+ clrbits32(bcsr_io,BCSR1_IRDAEN);
+ iounmap(bcsr_io);
+
+ io_port = (iop8xx_t *)immr_map(im_ioport);
+ cp = (cpm8xx_t *)immr_map(im_cpm);
+
+ /* Configure port A pins. */
+ setbits16(&io_port->iop_papar, 0x000c);
+ clrbits16(&io_port->iop_padir, 0x000c);
+
+ /* Configure Serial Interface clock routing.
+ * First, clear all SCC bits to zero, then set the ones we want.
+ */
+ clrbits32(&cp->cp_sicr, 0x0000ff00);
+ setbits32(&cp->cp_sicr, 0x00001200);
+
+ immr_unmap(io_port);
+ immr_unmap(cp);
+}
+
int platform_device_skip(const char *model, int id)
{
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 8a123c7..f827147 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -1102,4 +1102,62 @@ err:
arch_initcall(cpm_smc_uart_of_init);
+static const char *irda_regs = "regs";
+static const char *irda_pram = "pram";
+static const char *irda_irq = "interrupt";
+static char bus_id[9][BUS_ID_SIZE];
+
+static int __init fs_irda_of_init(void)
+{
+ struct device_node *np;
+ unsigned int i;
+ struct platform_device *fs_irda_dev = NULL;
+ int ret;
+
+ for (np = NULL, i = 0;
+ (np = of_find_compatible_node(np, "network", "fsl,irda")) != NULL;
+ i++) {
+ struct resource r[4];
+ unsigned int *id;
+ char *model;
+
+ memset(r, 0, sizeof(r));
+
+ model = (char *)get_property(np, "model", NULL);
+ if (model == NULL)
+ return -ENODEV;
+
+ id = (u32 *) get_property(np, "device-id", NULL);
+ if (platform_device_skip(model, *id))
+ continue;
+
+ ret = of_address_to_resource(np, 0, &r[0]);
+ if (ret)
+ return ret;
+ r[0].name = irda_regs;
+
+ if (strstr(model, "SCC")) {
+ ret = of_address_to_resource(np, 1, &r[1]);
+ if (ret)
+ return ret;
+ r[1].name = irda_pram;
+
+ r[2].start = r[2].end = irq_of_parse_and_map(np, 0);
+ r[2].flags = IORESOURCE_IRQ;
+ r[2].name = irda_irq;
+
+ fs_irda_dev =
+ platform_device_register_simple("fsl-cpm-scc:irda", i, &r[0], 3);
+
+ if (IS_ERR(fs_irda_dev)) {
+ ret = PTR_ERR(fs_irda_dev);
+ return ret;
+ }
+ }
+ }
+ return 0;
+}
+
+arch_initcall(fs_irda_of_init);
+
#endif /* CONFIG_8xx */
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 7c8ccc0..b3681e7 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -17,6 +17,10 @@ config IRTTY_SIR
If unsure, say Y.
+config 8XX_SIR
+ tristate "mpc8xx SIR"
+ depends on 8xx && IRDA
+
comment "Dongle support"
config DONGLE
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index 5be09f1..fc7c0fd 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_EP7211_IR) += ep7211_ir.o
obj-$(CONFIG_AU1000_FIR) += au1k_ir.o
# New SIR drivers
obj-$(CONFIG_IRTTY_SIR) += irtty-sir.o sir-dev.o
+obj-$(CONFIG_8XX_SIR) += m8xx-sir.o
# New dongles drivers for new SIR drivers
obj-$(CONFIG_ESI_DONGLE) += esi-sir.o
obj-$(CONFIG_TEKRAM_DONGLE) += tekram-sir.o
diff --git a/drivers/net/irda/m8xx-sir.c b/drivers/net/irda/m8xx-sir.c
new file mode 100644
index 0000000..6fb215f
--- /dev/null
+++ b/drivers/net/irda/m8xx-sir.c
@@ -0,0 +1,715 @@
+/*
+ * Infra-red SIR driver for the MPC8xx processors.
+ *
+ * Copyright (c) 2005-2007 MontaVista Software Inc.
+ * Author: Yuri Shpilevsky <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+#include <asm/irq.h>
+#include <asm/8xx_immap.h>
+#include <asm/pgtable.h>
+#include <asm/mpc8xx.h>
+#include <asm/bitops.h>
+#include <asm/uaccess.h>
+#include <asm/commproc.h>
+#include <asm/fs_pd.h>
+
+/*
+ * Our netdevice. There is only ever one of these.
+ */
+
+#define CPM_IRDA_RX_PAGES 4
+#define CPM_IRDA_RX_FRSIZE 2048
+#define CPM_IRDA_RX_FRPPG (PAGE_SIZE / CPM_IRDA_RX_FRSIZE)
+#define RX_RING_SIZE (CPM_IRDA_RX_FRPPG * CPM_IRDA_RX_PAGES)
+#define TX_RING_SIZE 8 /* Must be power of two */
+#define TX_RING_MOD_MASK 7
+
+struct mpc8xx_irda {
+ unsigned char open;
+
+ int speed;
+ int newspeed;
+
+ /* The saved address of a sent-in-place packet/buffer, for skfree().
+ */
+ struct sk_buff *tx_skbuff[TX_RING_SIZE];
+ ushort skb_cur;
+ ushort skb_dirty;
+
+ struct net_device_stats stats;
+ struct device *dev;
+ struct irda_platform_data *pdata;
+ struct irlap_cb *irlap;
+ struct qos_info qos;
+
+ scc_t *sccp;
+ scc_ahdlc_t *ahp;
+ int irq;
+ cbd_t *rx_bd_base;
+ cbd_t *tx_bd_base;
+ cbd_t *dirty_tx;
+ cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
+ unsigned char *rx_vaddr[RX_RING_SIZE];
+ int tx_free;
+ spinlock_t lock;
+};
+
+#define HPSIR_MAX_RXLEN 2050
+#define HPSIR_MAX_TXLEN 2050
+#define TXBUFF_MAX_SIZE HPSIR_MAX_TXLEN
+
+static void mpc8xx_irda_set_speed(struct net_device *dev, int speed);
+
+/************************************************************************************/
+
+/* Low level init/uninstall function IrDA protocol stack registration
+ */
+
+static void mpc8xx_irda_rx(struct net_device *dev)
+{
+ struct mpc8xx_irda *si = dev->priv;
+ cbd_t *bdp;
+ struct sk_buff *skb;
+ int len;
+ ushort status;
+
+ bdp = si->cur_rx;
+
+ for (;;) {
+ if (bdp->cbd_sc & BD_AHDLC_RX_EMPTY)
+ break;
+ status = bdp->cbd_sc;
+
+ if (status & BD_AHDLC_RX_STATS) {
+ /* process errors
+ */
+ if (bdp->cbd_sc & BD_AHDLC_RX_AB)
+ si->stats.rx_length_errors++;
+ if (bdp->cbd_sc & BD_AHDLC_RX_CR) /* CRC Error */
+ si->stats.rx_crc_errors++;
+ if (bdp->cbd_sc & BD_AHDLC_RX_OV) /* FIFO overrun */
+ si->stats.rx_over_errors++;
+ } else {
+ /* Process the incoming frame.
+ */
+ len = bdp->cbd_datlen;
+
+ skb = dev_alloc_skb(len + 1);
+ if (skb == NULL) {
+ printk(KERN_INFO
+ "%s: Memory squeeze, dropping packet.\n",
+ dev->name);
+ si->stats.rx_dropped++;
+ } else {
+ skb->dev = dev;
+ skb_reserve(skb, 1);
+ memcpy(skb_put(skb, len),
+ si->rx_vaddr[bdp - si->rx_bd_base], len);
+ skb_trim(skb, skb->len - 2);
+
+ si->stats.rx_packets++;
+ si->stats.rx_bytes += len;
+
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+ }
+ }
+
+ /* Clear the status flags for this buffer.
+ */
+ bdp->cbd_sc &= ~BD_AHDLC_RX_STATS;
+
+ /* Mark the buffer empty.
+ */
+ bdp->cbd_sc |= BD_AHDLC_RX_EMPTY;
+
+ /* Update BD pointer to next entry.
+ */
+ if (bdp->cbd_sc & BD_AHDLC_RX_WRAP)
+ bdp = si->rx_bd_base;
+ else
+ bdp++;
+ }
+ si->cur_rx = (cbd_t *) bdp;
+}
+
+static irqreturn_t mpc8xx_irda_irq(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct mpc8xx_irda *si = dev->priv;
+ scc_t *sccp = si->sccp;
+ cbd_t *bdp;
+ ushort int_events;
+ int must_restart = 0;
+
+ /* Get the interrupt events that caused us to be here.
+ */
+ int_events = in_be16(&sccp->scc_scce);
+ out_be16(&sccp->scc_scce, int_events);
+
+ /* Handle receive event in its own function.
+ */
+ if (int_events & SCC_AHDLC_RXF)
+ mpc8xx_irda_rx(dev);
+
+ spin_lock(&si->lock);
+
+ /* Transmit OK, or non-fatal error. Update the buffer descriptors.
+ */
+ if (int_events & (SCC_AHDLC_TXE | SCC_AHDLC_TXB)) {
+ bdp = si->dirty_tx;
+
+ while ((bdp->cbd_sc & BD_AHDLC_TX_READY) == 0) {
+ if (si->tx_free == TX_RING_SIZE)
+ break;
+
+ if (bdp->cbd_sc & BD_AHDLC_TX_CTS)
+ must_restart = 1;
+
+ si->stats.tx_packets++;
+
+ /* Free the sk buffer associated with this last transmit.
+ */
+ dev_kfree_skb_irq(si->tx_skbuff[si->skb_dirty]);
+ si->skb_dirty = (si->skb_dirty + 1) & TX_RING_MOD_MASK;
+
+ /* Update pointer to next buffer descriptor to be transmitted.
+ */
+ if (bdp->cbd_sc & BD_AHDLC_TX_WRAP)
+ bdp = si->tx_bd_base;
+ else
+ bdp++;
+
+ /* Since we have freed up a buffer, the ring is no longer full.
+ */
+ if (!si->tx_free++) {
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ }
+
+ si->dirty_tx = (cbd_t *) bdp;
+
+ if (si->newspeed) {
+ mpc8xx_irda_set_speed(dev, si->newspeed);
+ si->speed = si->newspeed;
+ si->newspeed = 0;
+ }
+ }
+
+ if (must_restart) {
+ cpm8xx_t *cp = immr_map(im_cpm);
+ printk(KERN_INFO "restart TX\n");
+
+ /* Some transmit errors cause the transmitter to shut
+ * down. We now issue a restart transmit. Since the
+ * errors close the BD and update the pointers, the restart
+ * _should_ pick up without having to reset any of our
+ * pointers either.
+ */
+ out_be16(&cp->cp_cpcr,
+ mk_cr_cmd(CPM_CR_CH_SCC2,
+ CPM_CR_RESTART_TX) | CPM_CR_FLG);
+ while (in_be16(&cp->cp_cpcr) & CPM_CR_FLG) ;
+ }
+ }
+
+ spin_unlock(&si->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int mpc8xx_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct mpc8xx_irda *si = dev->priv;
+ volatile scc_ahdlc_t *ahp = si->ahp;
+ int speed = irda_get_next_speed(skb);
+ cbd_t *bdp;
+ int mtt;
+ u16 xbofs;
+ unsigned long flags;
+
+ /*
+ * Does this packet contain a request to change the interface
+ * speed? If so, remember it until we complete the transmission
+ * of this frame.
+ */
+ if (speed != si->speed && speed != -1)
+ si->newspeed = speed;
+
+ mtt = irda_get_mtt(skb);
+
+ spin_lock_irqsave(&si->lock, flags);
+
+ /*
+ * If this is an empty frame, we can bypass a lot.
+ */
+ if (skb->len == 0) {
+ if (si->newspeed) {
+ si->newspeed = 0;
+ mpc8xx_irda_set_speed(dev, speed);
+ }
+ spin_unlock_irqrestore(&si->lock, flags);
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ /* Get a Tx ring entry */
+ bdp = si->cur_tx;
+
+ /* Clear all of the status flags.
+ */
+ bdp->cbd_sc &= ~BD_AHDLC_TX_STATS;
+
+ /* Set xbofs
+ */
+ {
+ struct irda_skb_cb *cb = (struct irda_skb_cb *)skb->cb;
+ xbofs =
+ (cb->magic != LAP_MAGIC) ? 10 : cb->xbofs + cb->xbofs_delay;
+ xbofs = (xbofs > 163) ? 163 : xbofs;
+ out_be16(&ahp->ahdlc_nof, xbofs);
+ }
+
+ /* Set buffer length and buffer pointer.
+ */
+ bdp->cbd_datlen = skb->len;
+ bdp->cbd_bufaddr = __pa(skb->data);
+
+ /* Push the data cache so the CPM does not get stale memory data.
+ */
+ flush_dcache_range((unsigned long)(skb->data),
+ (unsigned long)(skb->data + skb->len));
+
+ /* Save skb pointer.
+ */
+ si->tx_skbuff[si->skb_cur] = skb;
+
+ si->stats.tx_bytes += skb->len;
+ si->skb_cur = (si->skb_cur + 1) & TX_RING_MOD_MASK;
+
+ /* If we have a mean turn-around time, impose the specified
+ * specified delay. We could shorten this by timing from
+ * the point we received the packet.
+ */
+ if (mtt > 0)
+ udelay(mtt);
+
+ /* Send it on its way. Tell CPM its ready, interrupt when done,
+ * its the last BD of the frame, and to put the CRC on the end.
+ */
+ bdp->cbd_sc |=
+ (BD_AHDLC_TX_READY | BD_AHDLC_TX_INTR | BD_AHDLC_TX_LAST);
+
+ dev->trans_start = jiffies;
+
+ /* If this was the last BD in the ring, start at the beginning again.
+ */
+ if (bdp->cbd_sc & BD_AHDLC_TX_WRAP)
+ bdp = si->tx_bd_base;
+ else
+ bdp++;
+
+ spin_unlock_irqrestore(&si->lock, flags);
+
+ if (!--si->tx_free)
+ netif_stop_queue(dev);
+
+ si->cur_tx = (cbd_t *) bdp;
+
+ return 0;
+}
+
+static int
+mpc8xx_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
+{
+ struct if_irda_req *rq = (struct if_irda_req *)ifreq;
+ struct mpc8xx_irda *si = dev->priv;
+ int ret = -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH:
+ if (capable(CAP_NET_ADMIN)) {
+ /* We are unable to set the speed if the
+ * device is not running.
+ */
+ if (si->open)
+ mpc8xx_irda_set_speed(dev, rq->ifr_baudrate);
+ else
+ printk(KERN_INFO
+ "mpc8xx_irda_ioctl: SIOCSBANDWIDTH: !netif_running\n");
+ ret = 0;
+ }
+ break;
+
+ case SIOCSMEDIABUSY:
+ ret = -EPERM;
+ if (capable(CAP_NET_ADMIN)) {
+ irda_device_set_media_busy(dev, TRUE);
+ ret = 0;
+ }
+ break;
+
+ case SIOCGRECEIVING:
+ rq->ifr_receiving = 0;
+ break;
+
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static struct net_device_stats *mpc8xx_irda_stats(struct net_device *ndev)
+{
+ struct mpc8xx_irda *si = ndev->priv;
+ return &si->stats;
+}
+
+static int mpc8xx_irda_pd_setup(struct mpc8xx_irda *si)
+{
+ struct platform_device *pdev = to_platform_device(si->dev);
+ struct resource *r;
+
+ /* Fill out IRQ field */
+ si->irq = platform_get_irq_byname(pdev, "interrupt");
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ si->sccp = ioremap(r->start, r->end - r->start + 1);
+
+ if (si->sccp == NULL)
+ return -EINVAL;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram");
+ si->ahp = ioremap(r->start, r->end - r->start + 1);
+
+ if (si->ahp == NULL)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int mpc8xx_irda_startup(struct net_device *dev)
+{
+ struct mpc8xx_irda *si = dev->priv;
+ cbd_t *bdp;
+ volatile cpm8xx_t *cp = immr_map(im_cpm);
+ scc_t *sccp;
+ volatile scc_ahdlc_t *ahp;
+ dma_addr_t mem_addr;
+ int i, j, k;
+ unsigned char *ba;
+ int err = -ENOMEM;
+
+ spin_lock_init(&si->lock);
+
+ if ((err = mpc8xx_irda_pd_setup(si)))
+ return err;
+
+ sccp = si->sccp;
+ ahp = si->ahp;
+
+ /* Disable receive and transmit.
+ */
+ clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ /* Allocate space for the buffer descriptors in the DP ram.
+ * These are relative offsets in the DP ram address space.
+ * Initialize base addresses for the buffer descriptors.
+ */
+ i = cpm_dpalloc(sizeof(cbd_t) * RX_RING_SIZE, 8);
+ out_be16(&ahp->scc_genscc.scc_rbase, i);
+ si->rx_bd_base = cpm_dpram_addr(i);
+ si->cur_rx = si->rx_bd_base;
+
+ i = cpm_dpalloc(sizeof(cbd_t) * TX_RING_SIZE, 8);
+ out_be16(&ahp->scc_genscc.scc_tbase, i);
+ si->tx_bd_base = cpm_dpram_addr(i);
+ si->dirty_tx = si->cur_tx = si->tx_bd_base;
+ si->tx_free = TX_RING_SIZE;
+
+ /* Issue init Tx and Rx BD command for SCC2.
+ */
+ out_be16(&cp->cp_cpcr, mk_cr_cmd(CPM_CR_CH_SCC2, CPM_CR_INIT_TRX) | CPM_CR_FLG);
+ while (in_be16(&cp->cp_cpcr) & CPM_CR_FLG) ;
+
+ si->skb_cur = si->skb_dirty = 0;
+
+ /* Initialize function code registers for big-endian.
+ */
+ out_8(&ahp->scc_genscc.scc_rfcr, SCC_EB);
+ out_8(&ahp->scc_genscc.scc_tfcr, SCC_EB);
+
+ /* Set maximum bytes per receive buffer.
+ * This appears to be an Ethernet frame size, not the buffer
+ * fragment size. It must be a multiple of four.
+ */
+ out_be16(&ahp->scc_genscc.scc_mrblr, 14384);
+
+ /* Set CRC preset and mask.
+ */
+ out_be32(&ahp->ahdlc_cpres, 0x0000ffff);
+ out_be32(&ahp->ahdlc_cmask, 0x0000f0b8);
+
+ /* Clear zero register.
+ */
+ out_be16(&ahp->ahdlc_zero, 0);
+
+ /* Program RFTHR to the number of frames to be received
+ * before generating an interrupt.
+ */
+ out_be16(&ahp->ahdlc_rfthr, 1);
+
+ /* Program the control character tables, TXCTL_TBL and RXCTL_TBL.
+ */
+ out_be32(&ahp->ahdlc_txctl_tbl, 0); // initialized to zero for IrLAP.
+ out_be32(&ahp->ahdlc_rxctl_tbl, 0); // initialized to zero for IrLAP.
+
+ out_be16(&ahp->ahdlc_bof, 0xC0); //IRLAP_BOF; /* Begin. of Flag Char */
+ out_be16(&ahp->ahdlc_eof, 0xC1); //IRLAP_EOF; /* End of Flag Char */
+ out_be16(&ahp->ahdlc_esc, 0x7D); //IRLAP_ESC; /* Control Escape Char */
+ out_be16(&ahp->ahdlc_nof, 12);
+
+ /* Now allocate the host memory pages and initialize the
+ * buffer descriptors.
+ */
+ bdp = si->tx_bd_base;
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ /* Initialize the BD for every fragment in the page.
+ */
+ bdp->cbd_sc = 0;
+ bdp->cbd_bufaddr = 0;
+ bdp++;
+ }
+
+ /* Set the last buffer to wrap.
+ */
+ bdp--;
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+ bdp = si->rx_bd_base;
+ k = 0;
+ for (i = 0; i < CPM_IRDA_RX_PAGES; i++) {
+
+ /* Allocate a page.
+ */
+ ba = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE,
+ &mem_addr, GFP_KERNEL);
+
+ /* Initialize the BD for every fragment in the page.
+ */
+ for (j = 0; j < CPM_IRDA_RX_FRPPG; j++) {
+ bdp->cbd_sc = BD_AHDLC_RX_EMPTY | BD_AHDLC_RX_INTR;
+ bdp->cbd_bufaddr = mem_addr;
+ si->rx_vaddr[k++] = ba;
+ mem_addr += CPM_IRDA_RX_FRSIZE;
+ ba += CPM_IRDA_RX_FRSIZE;
+ bdp++;
+ }
+ }
+
+ /* Set the last buffer to wrap.
+ */
+ bdp--;
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+ out_be16(&sccp->scc_scce, 0xffff); /* Clear any pending events */
+ out_be16(&sccp->scc_sccm, SCC_AHDLC_TXE | SCC_AHDLC_RXF | SCC_AHDLC_TXB);
+
+ err = request_irq(si->irq, mpc8xx_irda_irq, 0, dev->name, dev);
+ if (err) {
+ kfree(si);
+ return err;
+ }
+
+ /* Set GSMR_H to enable all normal operating modes.
+ * Set GSMR_L to enable Ethernet to MC68160.
+ */
+ out_be32(&sccp->scc_gsmrh, SCC_GSMRH_RFW | SCC_GSMRH_IRP);
+ out_be32(&sccp->scc_gsmrl, SCC_GSMRL_SIR | SCC_GSMRL_MODE_AHDLC | SCC_GSMRL_TDCR_16 |
+ SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
+
+ out_be16(&sccp->scc_dsr, 0x7e7e);
+
+ /* Set processing mode.
+ */
+ out_be16(&sccp->scc_psmr, SCC_PMSR_CHLN);
+
+ /* Enable the transmit and receive processing.
+ */
+ setbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static int mpc8xx_irda_start(struct net_device *dev)
+{
+ struct mpc8xx_irda *si = dev->priv;
+ int err = 0;
+
+ if ((err = mpc8xx_irda_startup(dev)))
+ return err;
+
+ mpc8xx_irda_set_speed(dev, si->speed = 9600);
+
+ /* Open new IrLAP layer instance, now that everything should be
+ * initialized properly
+ */
+ si->irlap = irlap_open(dev, &si->qos, "MPC8xx SIR");
+ err = -ENOMEM;
+ if (!si->irlap) {
+ si->open = 0;
+ return err;
+ }
+
+ /* Now start the queue
+ */
+ si->open = 1;
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static int mpc8xx_irda_stop(struct net_device *dev)
+{
+ struct mpc8xx_irda *si = dev->priv;
+
+ disable_irq(dev->irq);
+
+ /* Stop IrLAP */
+ if (si->irlap) {
+ irlap_close(si->irlap);
+ si->irlap = NULL;
+ }
+
+ netif_stop_queue(dev);
+ si->open = 0;
+
+ /* Free resources
+ */
+ free_irq(dev->irq, dev);
+
+ return 0;
+}
+
+static void mpc8xx_irda_set_speed(struct net_device *dev, int speed)
+{
+ cpm_setbrg(2, speed);
+}
+
+static int mpc8xx_irda_probe(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct net_device *ndev;
+ struct mpc8xx_irda *si;
+ int err;
+
+ if (!(ndev = alloc_irdadev(sizeof(struct mpc8xx_irda))))
+ return -ENOMEM;
+
+ si = ndev->priv;
+ si->dev = dev;
+ si->pdata = pdev->dev.platform_data;
+
+ ndev->hard_start_xmit = mpc8xx_irda_hard_xmit;
+ ndev->open = mpc8xx_irda_start;
+ ndev->stop = mpc8xx_irda_stop;
+ ndev->do_ioctl = mpc8xx_irda_ioctl;
+ ndev->get_stats = mpc8xx_irda_stats;
+
+ irda_init_max_qos_capabilies(&si->qos);
+
+ /* We support original IRDA up to 115k2.
+ * Min Turn Time set to 1ms or greater.
+ */
+
+ si->qos.baud_rate.bits =
+ IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200;
+ si->qos.min_turn_time.bits = 7;
+ irda_qos_bits_to_value(&si->qos);
+
+ err = register_netdev(ndev);
+
+ if (!err) {
+ dev_set_drvdata(&pdev->dev, ndev);
+ printk(KERN_INFO "IrDA: Registered device %s\n", ndev->name);
+ } else
+ free_netdev(ndev);
+
+ return err;
+}
+
+static int mpc8xx_irda_remove(struct device *_dev)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+
+ if (dev) {
+ rtnl_lock();
+ unregister_netdevice(dev);
+ free_netdev(dev);
+ rtnl_unlock();
+ }
+
+ /*
+ * We now know that the netdevice is no longer in use, and all
+ * references to our driver have been removed. The only structure
+ * which may still be present is the netdevice, which will get
+ * cleaned up by net/core/dev.c
+ */
+
+ return 0;
+}
+
+static struct device_driver m8xxir_driver = {
+ .name = "fsl-cpm-scc:irda",
+ .bus = &platform_bus_type,
+ .probe = mpc8xx_irda_probe,
+ .remove = mpc8xx_irda_remove,
+};
+
+static int mpc8xx_irda_init(void)
+{
+ return driver_register(&m8xxir_driver);
+}
+
+static void __exit mpc8xx_irda_exit(void)
+{
+ driver_unregister(&m8xxir_driver);
+}
+
+module_init(mpc8xx_irda_init);
+module_exit(mpc8xx_irda_exit);
+
+MODULE_AUTHOR("[email protected]");
+MODULE_DESCRIPTION("MPC8XX SIR");
+MODULE_LICENSE("GPL");
diff --git a/include/asm-ppc/commproc.h b/include/asm-ppc/commproc.h
index 4f99df1..9e251c3 100644
--- a/include/asm-ppc/commproc.h
+++ b/include/asm-ppc/commproc.h
@@ -616,6 +616,73 @@ typedef struct spi {
#define SPIE_TXB 0x02
#define SPIE_RXB 0x01
+/* Asynchronous HDLC Mode Parameter RAM.
+*/
+typedef struct scc_ahdlc {
+ sccp_t scc_genscc;
+ uint ahdlc_res1; /* Reserved */
+ uint ahdlc_cmask; /* Constant mask for CRC */
+ uint ahdlc_cpres; /* Preset CRC */
+ ushort ahdlc_bof; /* Beginning of flag character */
+ ushort ahdlc_eof; /* End of flag character */
+ ushort ahdlc_esc; /* Control escape character. */
+ ushort ahdlc_res2; /* Reserved */
+ ushort ahdlc_res3; /* Reserved */
+ ushort ahdlc_zero; /* Clear this field */
+ ushort ahdlc_res4; /* Reserved */
+ ushort ahdlc_rfthr; /* Received frames threshold */
+ uint ahdlc_res5; /* Reserved */
+ uint ahdlc_txctl_tbl;/* Control Tx character tables */
+ uint ahdlc_rxctl_tbl;/* Control Rx character tables */
+ ushort ahdlc_nof; /* Number of opening flags to be sent at the beginning of a frame */
+ ushort ahdlc_res6; /* Reserved */
+} scc_ahdlc_t;
+
+/* SCC Mode Register (PMSR) as used by Ethernet.
+*/
+#define SCC_PMSR_CHLN ((ushort)0x3000) /* 8 bits character length */
+#define SICR_IRDA_MASK ((uint)0x0000ff00)
+#define SICR_IRDA_CLKRT ((uint)0x00001200)
+
+/* SCC Event register as used by Asynchronous HDLC.
+*/
+#define SCC_AHDLC_GLR ((ushort)0x1000)
+#define SCC_AHDLC_GLT ((ushort)0x0800)
+#define SCC_AHDLC_IDL ((ushort)0x0100)
+#define SCC_AHDLC_BRKE ((ushort)0x0040)
+#define SCC_AHDLC_BRKS ((ushort)0x0020)
+#define SCC_AHDLC_TXE ((ushort)0x0010)
+#define SCC_AHDLC_RXF ((ushort)0x0008)
+#define SCC_AHDLC_BSY ((ushort)0x0004)
+#define SCC_AHDLC_TXB ((ushort)0x0002)
+#define SCC_AHDLC_RXB ((ushort)0x0001)
+
+/* Buffer descriptor control/status used by AHDLC receive.
+*/
+#define BD_AHDLC_RX_EMPTY ((ushort)0x8000)
+#define BD_AHDLC_RX_WRAP ((ushort)0x2000)
+#define BD_AHDLC_RX_INTR ((ushort)0x1000)
+#define BD_AHDLC_RX_LAST ((ushort)0x0800)
+#define BD_AHDLC_RX_FIRST ((ushort)0x0400)
+#define BD_AHDLC_RX_CM ((ushort)0x0200)
+#define BD_AHDLC_RX_BRK ((ushort)0x0080)
+#define BD_AHDLC_RX_BOF ((ushort)0x0040)
+#define BD_AHDLC_RX_AB ((ushort)0x0008)
+#define BD_AHDLC_RX_CR ((ushort)0x0004)
+#define BD_AHDLC_RX_OV ((ushort)0x0002)
+#define BD_AHDLC_RX_CD ((ushort)0x0001)
+#define BD_AHDLC_RX_STATS ((ushort)0x008f) /* All status bits */
+
+/* Buffer descriptor control/status used by AHDLC transmit.
+*/
+#define BD_AHDLC_TX_READY ((ushort)0x8000)
+#define BD_AHDLC_TX_WRAP ((ushort)0x2000)
+#define BD_AHDLC_TX_INTR ((ushort)0x1000)
+#define BD_AHDLC_TX_LAST ((ushort)0x0800)
+#define BD_AHDLC_TX_CM ((ushort)0x0200)
+#define BD_AHDLC_TX_CTS ((ushort)0x0001)
+#define BD_AHDLC_TX_STATS ((ushort)0x03ff) /* All status bits */
+
/*
* RISC Controller Configuration Register definitons
*/
On May 7, 2007, at 8:30 PM, Vitaly Bordug wrote:
>
> Adds support of IRDA transceiver residing on PowerQUICC processors and
> enabling such on mpc885ads reference board. The driver is implemented
> using of_device concept, hereby implies arch/powerpc support of the
> target.
>
> Signed-off-by: Vitaly Bordug <[email protected]>
>
> Signed-off-by: Vitaly Bordug <[email protected]>
> ---
>
> arch/powerpc/Kconfig | 1
> arch/powerpc/boot/dts/mpc885ads.dts | 10
> arch/powerpc/platforms/8xx/mpc885ads_setup.c | 39 +
> arch/powerpc/sysdev/fsl_soc.c | 58 ++
> drivers/net/irda/Kconfig | 4
> drivers/net/irda/Makefile | 1
> drivers/net/irda/m8xx-sir.c | 715 +++++++++++++++
> +++++++++++
> include/asm-ppc/commproc.h | 67 ++
> 8 files changed, 895 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index a8e08f4..c283907 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -605,6 +605,7 @@ endmenu
> config ISA_DMA_API
> bool
> default y
> + depends on !PPC_8xx
>
> menu "Bus options"
>
> diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/
> boot/dts/mpc885ads.dts
> index 110bf61..95b280c 100644
> --- a/arch/powerpc/boot/dts/mpc885ads.dts
> +++ b/arch/powerpc/boot/dts/mpc885ads.dts
> @@ -178,6 +178,16 @@
> interrupt-parent = <930>;
> phy-handle = <e8002>;
> };
> +
> + scc@a20 {
> + device_type = "network";
> + compatible = "fsl,irda";
is this specific enough? 52xx also has irda and I'm guessing they'd
require different drivers (haven't looked).
> + model = "SCC";
> + device-id = <2>;
> + reg = <a20 18 3d00 80>;
> + interrupts = <1d 3>;
> + interrupt-parent = <930>;
> + };
> };
> };
> };
[snip]
> Adds support of IRDA transceiver residing on PowerQUICC processors and
> enabling such on mpc885ads reference board. The driver is implemented
> using of_device concept, hereby implies arch/powerpc support
> of the target.
>
> Signed-off-by: Vitaly Bordug <[email protected]>
> diff --git a/arch/powerpc/boot/dts/mpc885ads.dts
> b/arch/powerpc/boot/dts/mpc885ads.dts
> index 110bf61..95b280c 100644
> --- a/arch/powerpc/boot/dts/mpc885ads.dts
> +++ b/arch/powerpc/boot/dts/mpc885ads.dts
> @@ -178,6 +178,16 @@
> interrupt-parent = <930>;
> phy-handle = <e8002>;
> };
> +
> + scc@a20 {
> + device_type = "network";
> + compatible = "fsl,irda";
> + model = "SCC";
> + device-id = <2>;
> + reg = <a20 18 3d00 80>;
> + interrupts = <1d 3>;
> + interrupt-parent = <930>;
> + };
> };
> };
> };
Any chance we could get an update to the booting-without-of.txt
for any of this?
Thanks,
jdl
On Tue, 8 May 2007 07:36:48 -0700
"Loeliger Jon-LOELIGER" <[email protected]> wrote:
> > Adds support of IRDA transceiver residing on PowerQUICC processors and
> > enabling such on mpc885ads reference board. The driver is implemented
> > using of_device concept, hereby implies arch/powerpc support
> > of the target.
> >
> > Signed-off-by: Vitaly Bordug <[email protected]>
>
> > diff --git a/arch/powerpc/boot/dts/mpc885ads.dts
> > b/arch/powerpc/boot/dts/mpc885ads.dts
> > index 110bf61..95b280c 100644
> > --- a/arch/powerpc/boot/dts/mpc885ads.dts
> > +++ b/arch/powerpc/boot/dts/mpc885ads.dts
> > @@ -178,6 +178,16 @@
> > interrupt-parent = <930>;
> > phy-handle = <e8002>;
> > };
> > +
> > + scc@a20 {
> > + device_type = "network";
> > + compatible = "fsl,irda";
> > + model = "SCC";
> > + device-id = <2>;
> > + reg = <a20 18 3d00 80>;
> > + interrupts = <1d 3>;
> > + interrupt-parent = <930>;
> > + };
> > };
> > };
> > };
>
>
> Any chance we could get an update to the booting-without-of.txt
> for any of this?
>
Yes of course. my note is that it makes sense once defines would settle down
stuff that looks OK in docs might not look such in driver...
--
Sincerely,
Vitaly
On Tue, 8 May 2007 08:33:19 -0500
Kumar Gala <[email protected]> wrote:
> > + scc@a20 {
> > + device_type = "network";
> > + compatible = "fsl,irda";
>
> is this specific enough? 52xx also has irda and I'm guessing they'd
> require different drivers (haven't looked).
Yap, I'll do "fsl,pq-irda" here...
--
Sincerely,
Vitaly