Typo fix in at91_mci driver : standardized the typo
(at91_mci everywhere)
Signed-off-by: Nicolas Ferre <[email protected]>
---
Will not make the driver works better but will satisfy the most
demanding typo specialists.
drivers/mmc/host/at91_mci.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
Index: b/drivers/mmc/host/at91_mci.c
===================================================================
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -131,7 +131,7 @@ struct at91mci_host
/*
* Copy from sg to a dma block - used for transfers
*/
-static inline void at91mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
+static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
{
unsigned int len, i, size;
unsigned *dmabuf = host->buffer;
@@ -180,7 +180,7 @@ static inline void at91mci_sg_to_dma(str
/*
* Prepare a dma read
*/
-static void at91mci_pre_dma_read(struct at91mci_host *host)
+static void at91_mci_pre_dma_read(struct at91mci_host *host)
{
int i;
struct scatterlist *sg;
@@ -248,7 +248,7 @@ static void at91mci_pre_dma_read(struct
/*
* Handle after a dma read
*/
-static void at91mci_post_dma_read(struct at91mci_host *host)
+static void at91_mci_post_dma_read(struct at91mci_host *host)
{
struct mmc_command *cmd;
struct mmc_data *data;
@@ -299,7 +299,7 @@ static void at91mci_post_dma_read(struct
/* Is there another transfer to trigger? */
if (host->transfer_index < data->sg_len)
- at91mci_pre_dma_read(host);
+ at91_mci_pre_dma_read(host);
else {
at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
@@ -464,7 +464,7 @@ static unsigned int at91_mci_send_comman
host->buffer = NULL;
host->total_length = 0;
- at91mci_pre_dma_read(host);
+ at91_mci_pre_dma_read(host);
ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */;
}
else {
@@ -476,7 +476,7 @@ static unsigned int at91_mci_send_comman
host->total_length,
&host->physical_address, GFP_KERNEL);
- at91mci_sg_to_dma(host, data);
+ at91_mci_sg_to_dma(host, data);
pr_debug("Transmitting %d bytes\n", host->total_length);
@@ -506,7 +506,7 @@ static unsigned int at91_mci_send_comman
/*
* Wait for a command to complete
*/
-static void at91mci_process_command(struct at91mci_host *host, struct mmc_command *cmd)
+static void at91_mci_process_command(struct at91mci_host *host, struct mmc_command *cmd)
{
unsigned int ier;
@@ -521,15 +521,15 @@ static void at91mci_process_command(stru
/*
* Process the next step in the request
*/
-static void at91mci_process_next(struct at91mci_host *host)
+static void at91_mci_process_next(struct at91mci_host *host)
{
if (!(host->flags & FL_SENT_COMMAND)) {
host->flags |= FL_SENT_COMMAND;
- at91mci_process_command(host, host->request->cmd);
+ at91_mci_process_command(host, host->request->cmd);
}
else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) {
host->flags |= FL_SENT_STOP;
- at91mci_process_command(host, host->request->stop);
+ at91_mci_process_command(host, host->request->stop);
}
else
mmc_request_done(host->mmc, host->request);
@@ -538,7 +538,7 @@ static void at91mci_process_next(struct
/*
* Handle a command that has been completed
*/
-static void at91mci_completed_command(struct at91mci_host *host)
+static void at91_mci_completed_command(struct at91mci_host *host)
{
struct mmc_command *cmd = host->cmd;
unsigned int status;
@@ -581,7 +581,7 @@ static void at91mci_completed_command(st
else
cmd->error = MMC_ERR_NONE;
- at91mci_process_next(host);
+ at91_mci_process_next(host);
}
/*
@@ -593,7 +593,7 @@ static void at91_mci_request(struct mmc_
host->request = mrq;
host->flags = 0;
- at91mci_process_next(host);
+ at91_mci_process_next(host);
}
/*
@@ -706,7 +706,7 @@ static irqreturn_t at91_mci_irq(int irq,
if (int_status & AT91_MCI_ENDRX) {
pr_debug("Receive has ended\n");
- at91mci_post_dma_read(host);
+ at91_mci_post_dma_read(host);
}
if (int_status & AT91_MCI_NOTBUSY) {
@@ -735,7 +735,7 @@ static irqreturn_t at91_mci_irq(int irq,
if (completed) {
pr_debug("Completed command\n");
at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
- at91mci_completed_command(host);
+ at91_mci_completed_command(host);
} else
at91_mci_write(host, AT91_MCI_IDR, int_status);
On Tue, 19 Jun 2007 18:32:34 +0200
Nicolas Ferre <[email protected]> wrote:
>
> Typo fix in at91_mci driver : standardized the typo
> (at91_mci everywhere)
>
> Signed-off-by: Nicolas Ferre <[email protected]>
> ---
Thanks, applied.