On Wed, 01 Aug 2007 05:16:27 +0200 Gabriel C <[email protected]> wrote:
>
> arch/powerpc/platforms/iseries/it_lp_naca.h | 87 +++++++++++----------
NAK this part as it just makes a lot of the lines more than 80 characters
for no real gain on a platform that is moving on ...
--
Cheers,
Stephen Rothwell [email protected]
http://www.canb.auug.org.au/~sfr/
Stephen Rothwell wrote:
> On Wed, 01 Aug 2007 05:16:27 +0200 Gabriel C <[email protected]> wrote:
>> arch/powerpc/platforms/iseries/it_lp_naca.h | 87 +++++++++++----------
>
> NAK this part as it just makes a lot of the lines more than 80 characters
> for no real gain on a platform that is moving on ...
Well some were there before but with the wrong comment style.
I'll send an new patch in a bit without the comments fixes.
Gabriel
This patch fixes some interrrupt -> interrupt typos
Signed-off-by: Gabriel Craciunescu <[email protected]>
---
arch/powerpc/platforms/embedded6xx/holly.c | 2 +-
arch/powerpc/platforms/embedded6xx/linkstation.c | 2 +-
arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c | 2 +-
arch/powerpc/platforms/iseries/it_lp_naca.h | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c
index 6292e36..fda16e8 100644
--- a/arch/powerpc/platforms/embedded6xx/holly.c
+++ b/arch/powerpc/platforms/embedded6xx/holly.c
@@ -147,7 +147,7 @@ static void __init holly_setup_arch(void)
}
/*
- * Interrupt setup and service. Interrrupts on the holly come
+ * Interrupt setup and service. Interrupts on the holly come
* from the four external INT pins, PCI interrupts are routed via
* PCI interrupt control registers, it generates internal IRQ23
*
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index bd5ca58..8c60e02 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -99,7 +99,7 @@ static void __init linkstation_setup_arch(void)
}
/*
- * Interrupt setup and service. Interrrupts on the linkstation come
+ * Interrupt setup and service. Interrupts on the linkstation come
* from the four PCI slots plus onboard 8241 devices: I2C, DUART.
*/
static void __init linkstation_init_IRQ(void)
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index 1e3cc69..25c29bc 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -91,7 +91,7 @@ static void __init mpc7448_hpc2_setup_arch(void)
}
/*
- * Interrupt setup and service. Interrrupts on the mpc7448_hpc2 come
+ * Interrupt setup and service. Interrupts on the mpc7448_hpc2 come
* from the four external INT pins, PCI interrupts are routed via
* PCI interrupt control registers, it generates internal IRQ23
*
diff --git a/arch/powerpc/platforms/iseries/it_lp_naca.h b/arch/powerpc/platforms/iseries/it_lp_naca.h
index 9bbf589..cf6dcf6 100644
--- a/arch/powerpc/platforms/iseries/it_lp_naca.h
+++ b/arch/powerpc/platforms/iseries/it_lp_naca.h
@@ -60,7 +60,7 @@ struct ItLpNaca {
u8 xRsvd2_0[128]; // Reserved x00-x7F
// CACHE_LINE_3-6 0x0100 - 0x02FF Contains LP Queue indicators
-// NB: Padding required to keep xInterrruptHdlr at x300 which is required
+// NB: Padding required to keep xInterruptHdlr at x300 which is required
// for v4r4 PLIC.
u8 xOldLpQueue[128]; // LP Queue needed for v4r4 100-17F
u8 xRsvd3_0[384]; // Reserved 180-2FF