I'm running the 2.6.22.6 kernel with the berry_charge module loaded. I connect my 8700c via USB, but the blackberry does not appear to charge. The power icon does not change, and even after staying connected for an extended period, the device does not appear to be gaining any power. The cable is good, as I can plug it into my Windows machine and it begins charging immediately. I see the following in dmesg:
[ 6638.606493] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 6638.776524] usb 1-2: configuration #1 chosen from 1 choice
[ 6639.639611] usbcore: registered new interface driver berry_charge
[ 6639.837097] usb 1-2: Second magic command failed: -71.
[ 6639.866430] usb 1-2: USB disconnect, address 2
[ 6640.610385] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 6640.775947] usb 1-2: configuration #1 chosen from 1 choice
I'd be glad to provide more information if needed.
--
Matt LaPlante
On Sat, Sep 08, 2007 at 10:02:29PM -0400, Matt LaPlante wrote:
> I'm running the 2.6.22.6 kernel with the berry_charge module loaded.
> I connect my 8700c via USB, but the blackberry does not appear to
> charge. The power icon does not change, and even after staying
> connected for an extended period, the device does not appear to be
> gaining any power. The cable is good, as I can plug it into my
> Windows machine and it begins charging immediately. I see the
> following in dmesg:
>
> [ 6638.606493] usb 1-2: new full speed USB device using uhci_hcd and address 2
> [ 6638.776524] usb 1-2: configuration #1 chosen from 1 choice
> [ 6639.639611] usbcore: registered new interface driver berry_charge
> [ 6639.837097] usb 1-2: Second magic command failed: -71.
Ick, that's not nice. Can you enable CONFIG_USB_DEBUG and debugging for
the berry_charge driver:
modprobe berry_charge debug=1
and let us know what happens?
thanks,
greg k-h
On Sun, 9 Sep 2007 03:52:12 -0700
Greg KH <[email protected]> wrote:
> On Sat, Sep 08, 2007 at 10:02:29PM -0400, Matt LaPlante wrote:
> > I'm running the 2.6.22.6 kernel with the berry_charge module loaded.
> > I connect my 8700c via USB, but the blackberry does not appear to
> > charge. The power icon does not change, and even after staying
> > connected for an extended period, the device does not appear to be
> > gaining any power. The cable is good, as I can plug it into my
> > Windows machine and it begins charging immediately. I see the
> > following in dmesg:
> >
> > [ 6638.606493] usb 1-2: new full speed USB device using uhci_hcd and address 2
> > [ 6638.776524] usb 1-2: configuration #1 chosen from 1 choice
> > [ 6639.639611] usbcore: registered new interface driver berry_charge
> > [ 6639.837097] usb 1-2: Second magic command failed: -71.
>
>
> Ick, that's not nice. Can you enable CONFIG_USB_DEBUG and debugging for
> the berry_charge driver:
> modprobe berry_charge debug=1
>
> and let us know what happens?
Here you go...
Sep 9 13:47:58 prizm kernel: [ 521.256235] usbcore: registered new interface driver berry_charge
Sep 9 13:49:00 prizm kernel: [ 582.750808] usb usb5: usb resume
Sep 9 13:49:00 prizm kernel: [ 582.750814] usb usb5: finish resume
Sep 9 13:49:00 prizm kernel: [ 582.750825] hub 5-0:1.0: hub_resume
Sep 9 13:49:00 prizm kernel: [ 582.750828] ehci_hcd 0000:00:10.4: resume root hub
Sep 9 13:49:00 prizm kernel: [ 582.793723] hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0000
Sep 9 13:49:00 prizm kernel: [ 582.793864] ehci_hcd 0000:00:10.4: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
Sep 9 13:49:00 prizm kernel: [ 582.793978] hub 5-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
Sep 9 13:49:00 prizm kernel: [ 582.923607] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
Sep 9 13:49:00 prizm kernel: [ 582.981556] ehci_hcd 0000:00:10.4: port 2 full speed --> companion
Sep 9 13:49:00 prizm kernel: [ 582.981565] ehci_hcd 0000:00:10.4: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
Sep 9 13:49:00 prizm kernel: [ 582.981676] usb usb1: usb resume
Sep 9 13:49:00 prizm kernel: [ 582.981678] usb usb1: finish resume
Sep 9 13:49:00 prizm kernel: [ 582.981684] hub 1-0:1.0: hub_resume
Sep 9 13:49:00 prizm kernel: [ 582.981686] usb usb1: wakeup_rh
Sep 9 13:49:00 prizm kernel: [ 582.993728] hub 5-0:1.0: port 2 not reset yet, waiting 50ms
Sep 9 13:49:00 prizm kernel: [ 583.049727] ehci_hcd 0000:00:10.4: GetStatus port 2 status 003802 POWER OWNER sig=j CSC
Sep 9 13:49:00 prizm kernel: [ 583.049906] hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0004
Sep 9 13:49:00 prizm kernel: [ 583.049982] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
Sep 9 13:49:00 prizm kernel: [ 583.050058] uhci_hcd 0000:00:10.0: port 2 portsc 0093,00
Sep 9 13:49:00 prizm kernel: [ 583.050128] hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
Sep 9 13:49:00 prizm kernel: [ 583.177674] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
Sep 9 13:49:00 prizm kernel: [ 583.289675] usb 1-2: new full speed USB device using uhci_hcd and address 2
Sep 9 13:49:00 prizm kernel: [ 583.421643] usb 1-2: ep0 maxpacket = 16
Sep 9 13:49:00 prizm kernel: [ 583.441583] usb 1-2: default language 0x0409
Sep 9 13:49:00 prizm kernel: [ 583.453603] usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
Sep 9 13:49:00 prizm kernel: [ 583.453609] usb 1-2: Product: BlackBerry Device
Sep 9 13:49:00 prizm kernel: [ 583.453611] usb 1-2: Manufacturer: Research In Motion
Sep 9 13:49:00 prizm kernel: [ 583.453661] usb 1-2: uevent
Sep 9 13:49:00 prizm kernel: [ 583.453685] usb 1-2: usb_probe_device
Sep 9 13:49:00 prizm kernel: [ 583.453736] usb 1-2: configuration #1 chosen from 1 choice
Sep 9 13:49:00 prizm kernel: [ 583.455613] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:00 prizm kernel: [ 583.455652] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.455657] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.455679] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:00 prizm kernel: [ 583.455681] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:00 prizm kernel: [ 583.455685] usb 1-2: Power is set to 100mA
Sep 9 13:49:00 prizm kernel: [ 583.455687] usb 1-2: Sending first magic command
Sep 9 13:49:00 prizm kernel: [ 583.457577] usb 1-2: Sending second magic command
Sep 9 13:49:00 prizm kernel: [ 583.458578] usb 1-2: Calling set_configuration
Sep 9 13:49:00 prizm kernel: [ 583.458727] drivers/usb/core/inode.c: creating file '002'
Sep 9 13:49:00 prizm kernel: [ 583.458741] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:00 prizm kernel: [ 583.458744] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:00 prizm kernel: [ 583.458770] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:00 prizm kernel: [ 583.458787] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:00 prizm kernel: [ 583.458803] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:00 prizm kernel: [ 583.458820] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:00 prizm kernel: [ 583.458833] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.458837] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.461663] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:00 prizm kernel: [ 583.461706] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.461711] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.461732] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:00 prizm kernel: [ 583.461734] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:00 prizm kernel: [ 583.461738] usb 1-2: Power is set to 100mA
Sep 9 13:49:00 prizm kernel: [ 583.461740] usb 1-2: Sending first magic command
Sep 9 13:49:00 prizm kernel: [ 583.462615] usb 1-2: Sending second magic command
Sep 9 13:49:00 prizm kernel: [ 583.463568] usb 1-2: Calling set_configuration
Sep 9 13:49:00 prizm kernel: [ 583.463679] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:00 prizm kernel: [ 583.463683] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:00 prizm kernel: [ 583.463707] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:00 prizm kernel: [ 583.463725] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:00 prizm kernel: [ 583.463741] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:00 prizm kernel: [ 583.463757] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:00 prizm kernel: [ 583.463769] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.463774] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.465576] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:00 prizm kernel: [ 583.465602] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.465606] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.465623] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:00 prizm kernel: [ 583.465625] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:00 prizm kernel: [ 583.465642] usb 1-2: Power is set to 100mA
Sep 9 13:49:00 prizm kernel: [ 583.465644] usb 1-2: Sending first magic command
Sep 9 13:49:00 prizm kernel: [ 583.466570] usb 1-2: Sending second magic command
Sep 9 13:49:00 prizm kernel: [ 583.467566] usb 1-2: Calling set_configuration
Sep 9 13:49:00 prizm kernel: [ 583.467675] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:00 prizm kernel: [ 583.467679] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:00 prizm kernel: [ 583.467703] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:00 prizm kernel: [ 583.467721] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:00 prizm kernel: [ 583.467739] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:00 prizm kernel: [ 583.467756] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:00 prizm kernel: [ 583.467768] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.467773] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.469573] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:00 prizm kernel: [ 583.469594] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.469599] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.469613] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:00 prizm kernel: [ 583.469616] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:00 prizm kernel: [ 583.469619] usb 1-2: Power is set to 100mA
Sep 9 13:49:00 prizm kernel: [ 583.469621] usb 1-2: Sending first magic command
Sep 9 13:49:00 prizm kernel: [ 583.470568] usb 1-2: Sending second magic command
Sep 9 13:49:00 prizm kernel: [ 583.471565] usb 1-2: Calling set_configuration
Sep 9 13:49:00 prizm kernel: [ 583.471671] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:00 prizm kernel: [ 583.471674] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:00 prizm kernel: [ 583.471696] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:00 prizm kernel: [ 583.471714] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:00 prizm kernel: [ 583.471731] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:00 prizm kernel: [ 583.471748] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:00 prizm kernel: [ 583.471760] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.471764] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.473571] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:00 prizm kernel: [ 583.473593] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.473598] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.473613] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:00 prizm kernel: [ 583.473615] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:00 prizm kernel: [ 583.473618] usb 1-2: Power is set to 100mA
Sep 9 13:49:00 prizm kernel: [ 583.473620] usb 1-2: Sending first magic command
Sep 9 13:49:00 prizm kernel: [ 583.474583] usb 1-2: Sending second magic command
Sep 9 13:49:00 prizm kernel: [ 583.475580] usb 1-2: Calling set_configuration
Sep 9 13:49:00 prizm kernel: [ 583.475688] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:00 prizm kernel: [ 583.475691] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:00 prizm kernel: [ 583.475714] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:00 prizm kernel: [ 583.475732] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:00 prizm kernel: [ 583.475749] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:00 prizm kernel: [ 583.475766] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:00 prizm kernel: [ 583.475778] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.475782] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.477574] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:00 prizm kernel: [ 583.477600] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.477605] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.477621] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:00 prizm kernel: [ 583.477624] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:00 prizm kernel: [ 583.477634] usb 1-2: Power is set to 100mA
Sep 9 13:49:00 prizm kernel: [ 583.477636] usb 1-2: Sending first magic command
Sep 9 13:49:00 prizm kernel: [ 583.478566] usb 1-2: Sending second magic command
Sep 9 13:49:00 prizm kernel: [ 583.479563] usb 1-2: Calling set_configuration
Sep 9 13:49:00 prizm kernel: [ 583.479674] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:00 prizm kernel: [ 583.479677] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:00 prizm kernel: [ 583.479700] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:00 prizm kernel: [ 583.479718] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:00 prizm kernel: [ 583.479735] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:00 prizm kernel: [ 583.479752] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:00 prizm kernel: [ 583.479763] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.479768] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.481570] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:00 prizm kernel: [ 583.481592] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.481596] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.481611] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:00 prizm kernel: [ 583.481614] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:00 prizm kernel: [ 583.481617] usb 1-2: Power is set to 100mA
Sep 9 13:49:00 prizm kernel: [ 583.481619] usb 1-2: Sending first magic command
Sep 9 13:49:00 prizm kernel: [ 583.482563] usb 1-2: Sending second magic command
Sep 9 13:49:00 prizm kernel: [ 583.483561] usb 1-2: Calling set_configuration
Sep 9 13:49:00 prizm kernel: [ 583.483671] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:00 prizm kernel: [ 583.483674] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:00 prizm kernel: [ 583.483696] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:00 prizm kernel: [ 583.483714] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:00 prizm kernel: [ 583.483731] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:00 prizm kernel: [ 583.483749] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:00 prizm kernel: [ 583.483760] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.483765] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.485571] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:00 prizm kernel: [ 583.485593] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.485598] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.485614] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:00 prizm kernel: [ 583.485617] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:00 prizm kernel: [ 583.485620] usb 1-2: Power is set to 100mA
Sep 9 13:49:00 prizm kernel: [ 583.485622] usb 1-2: Sending first magic command
Sep 9 13:49:00 prizm kernel: [ 583.486564] usb 1-2: Sending second magic command
Sep 9 13:49:00 prizm kernel: [ 583.487560] usb 1-2: Calling set_configuration
Sep 9 13:49:00 prizm kernel: [ 583.487668] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:00 prizm kernel: [ 583.487672] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:00 prizm kernel: [ 583.487695] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:00 prizm kernel: [ 583.487714] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:00 prizm kernel: [ 583.487731] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:00 prizm kernel: [ 583.487748] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:00 prizm kernel: [ 583.487760] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.487764] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.489569] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:00 prizm kernel: [ 583.489595] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.489599] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.489616] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:00 prizm kernel: [ 583.489618] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:00 prizm kernel: [ 583.489622] usb 1-2: Power is set to 100mA
Sep 9 13:49:00 prizm kernel: [ 583.489624] usb 1-2: Sending first magic command
Sep 9 13:49:00 prizm kernel: [ 583.490564] usb 1-2: Sending second magic command
Sep 9 13:49:00 prizm kernel: [ 583.491560] usb 1-2: Calling set_configuration
Sep 9 13:49:00 prizm kernel: [ 583.491670] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:00 prizm kernel: [ 583.491673] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:00 prizm kernel: [ 583.491696] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:00 prizm kernel: [ 583.491713] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:00 prizm kernel: [ 583.491730] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:00 prizm kernel: [ 583.491746] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:00 prizm kernel: [ 583.491758] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.491763] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.493567] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:00 prizm kernel: [ 583.493591] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.493596] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.493613] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:00 prizm kernel: [ 583.493615] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:00 prizm kernel: [ 583.493618] usb 1-2: Power is set to 100mA
Sep 9 13:49:00 prizm kernel: [ 583.493620] usb 1-2: Sending first magic command
Sep 9 13:49:00 prizm kernel: [ 583.494575] usb 1-2: Sending second magic command
Sep 9 13:49:00 prizm kernel: [ 583.495581] usb 1-2: Calling set_configuration
Sep 9 13:49:00 prizm kernel: [ 583.495693] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:00 prizm kernel: [ 583.495697] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:00 prizm kernel: [ 583.495719] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:00 prizm kernel: [ 583.495737] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:00 prizm kernel: [ 583.495754] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:00 prizm kernel: [ 583.495771] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:00 prizm kernel: [ 583.495784] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.495789] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.497566] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:00 prizm kernel: [ 583.497591] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.497596] usb 1-2:1.0: uevent
Sep 9 13:49:00 prizm kernel: [ 583.497612] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:00 prizm kernel: [ 583.497614] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:00 prizm kernel: [ 583.497618] usb 1-2: Power is set to 100mA
Sep 9 13:49:00 prizm kernel: [ 583.497620] usb 1-2: Sending first magic command
Sep 9 13:49:00 prizm kernel: [ 583.498560] usb 1-2: Sending second magic command
Sep 9 13:49:00 prizm kernel: [ 583.499558] usb 1-2: Calling set_configuration
Sep 9 13:49:00 prizm kernel: [ 583.499669] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:00 prizm kernel: [ 583.499672] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.499694] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.499712] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.499729] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.499746] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.499758] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.499763] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.502562] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.502590] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.502594] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.502611] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.502613] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.502617] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.502619] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.503564] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.504556] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.504670] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.504674] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.504697] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.504714] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.504731] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.504748] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.504760] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.504765] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.506562] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.506586] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.506590] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.506606] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.506608] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.506611] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.506613] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.507560] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.508554] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.508666] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.508670] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.508693] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.508711] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.508728] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.508746] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.508758] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.508762] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.510562] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.510587] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.510591] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.510607] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.510610] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.510613] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.510615] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.511557] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.512553] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.512660] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.512664] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.512685] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.512703] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.512720] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.512736] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.512748] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.512752] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.514563] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.514591] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.514595] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.514612] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.514615] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.514618] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.514620] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.515557] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.516552] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.516667] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.516670] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.516694] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.516712] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.516730] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.516746] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.516759] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.516763] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.518561] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.518588] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.518592] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.518609] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.518611] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.518615] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.518617] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.519555] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.520551] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.520658] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.520661] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.520683] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.520700] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.520717] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.520733] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.520745] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.520749] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.522582] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.522609] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.522613] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.522630] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.522632] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.522636] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.522638] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.523570] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.524550] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.524663] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.524666] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.524690] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.524707] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.524725] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.524742] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.524755] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.524759] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.526560] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.526585] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.526590] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.526607] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.526609] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.526612] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.526614] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.527553] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.528549] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.528660] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.528663] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.528686] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.528704] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.528721] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.528737] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.528749] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.528754] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.530559] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.530585] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.530590] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.530607] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.530609] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.530612] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.530614] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.531552] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.532547] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.532662] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.532666] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.532689] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.532707] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.532723] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.532741] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.532753] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.532757] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.534559] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.534585] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.534590] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.534606] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.534609] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.534612] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.534614] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.535551] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.536546] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.536655] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.536659] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.536681] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.536699] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.536717] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.536734] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.536747] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.536751] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.538557] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.538585] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.538589] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.538605] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.538607] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.538610] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.538613] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.539549] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.540545] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.540653] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.540656] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.540679] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.540696] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.540713] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.540729] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.540742] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.540747] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.542555] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.542579] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.542583] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.542600] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.542603] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.542606] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.542608] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.543550] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.544544] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.544654] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.544658] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.544681] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.544698] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.544715] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.544731] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.544743] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.544747] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.546582] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.546610] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.546614] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.546631] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.546633] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.546637] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.546639] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.547567] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.548543] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.548658] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.548662] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.548685] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.548703] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.548720] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.548737] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.548749] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.548753] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.551550] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.551575] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.551579] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.551596] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.551598] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.551601] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.551603] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.552550] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.553541] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.553667] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.553670] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.553694] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.553712] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.553729] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.553750] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.553762] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.553767] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.556549] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.556576] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.556580] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.556597] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.556599] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.556602] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.556604] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.557546] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.558546] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.558671] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.558674] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.558697] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.558715] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.558731] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.558756] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.558769] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.558774] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.561552] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.561583] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.561588] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.561606] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.561608] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.561612] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.561614] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.562551] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.563540] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.563660] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.563664] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.563688] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.563706] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.563723] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.563749] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.563762] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.563766] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.565548] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.565572] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.565576] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.565592] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.565594] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.565598] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.565600] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.566544] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.567539] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.567653] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.567656] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.567680] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.567698] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.567715] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.567740] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.567753] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.567757] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.569546] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.569570] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.569574] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.569591] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.569593] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.569596] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.569598] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.570566] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.571550] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.571672] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.571676] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.571700] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.571719] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.571737] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.571755] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.571776] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.571781] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.573545] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.573569] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.573574] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.573589] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.573591] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.573594] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.573596] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.574541] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.575535] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.575654] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.575657] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.575681] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.575698] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.575715] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.575731] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.575753] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.575757] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.577551] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.577578] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.577582] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.577600] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.577602] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.577606] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.577608] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.578540] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.579536] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.579659] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.579663] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.579686] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.579705] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.579722] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.579739] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.579760] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.579765] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.581544] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.581568] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.581572] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.581589] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.581591] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.581594] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.581596] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.582540] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.583533] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.583652] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.583656] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.583680] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.583698] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.583714] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.583731] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.583754] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.583758] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.585543] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.585568] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.585573] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.585589] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.585591] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.585595] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.585597] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.586539] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.587533] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.587649] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.587653] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.587676] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.587694] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.587711] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.587727] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.587748] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.587752] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.589541] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.589566] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.589570] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.589586] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.589589] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.589592] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.589594] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.590555] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.591554] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.591676] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.591679] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.591703] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.591721] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.591739] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.591755] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.591776] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.591781] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.594544] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.594576] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.594580] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.594597] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.594600] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.594603] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.594605] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.595536] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.596530] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.596650] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.596653] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.596677] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.596695] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.596712] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.596729] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.596742] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.596746] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.599539] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.599570] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.599575] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.599593] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.599595] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.599598] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.599601] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.600539] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.601528] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.601668] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.601672] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.601694] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.601712] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.601728] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.601745] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.601757] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.601762] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.604538] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.604566] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.604571] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.604589] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.604591] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.604595] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.604597] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.605534] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.606527] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.606643] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.606646] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.606670] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.606688] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.606704] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.606722] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.606735] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.606739] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.609538] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.609568] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.609572] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.609590] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.609592] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.609595] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.609597] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.610533] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.611525] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.611643] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.611647] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.611671] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.611688] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.611705] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.611722] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.611734] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.611739] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.613537] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.613564] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.613569] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.613585] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.613588] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.613591] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.613593] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.614527] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.615527] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.615650] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.615654] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.615678] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.615696] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.615714] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.615731] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.615744] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.615748] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.617535] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.617562] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.617567] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.617583] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.617585] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.617589] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.617591] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.618543] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.619547] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.619666] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.619669] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.619692] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.619710] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.619726] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.619743] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.619757] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.619761] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.621532] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.621558] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.621562] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.621578] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.621581] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.621584] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.621586] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.622526] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.623523] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.623644] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.623648] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.623671] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.623689] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.623706] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.623723] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.623736] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.623741] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.625532] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.625557] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.625561] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.625577] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.625579] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.625582] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.625584] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.626525] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.627522] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.627640] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.627643] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.627666] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.627684] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.627701] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.627718] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.627730] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.627734] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.629530] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.629556] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.629560] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.629576] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.629579] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.629582] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.629584] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.630523] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.631520] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.631637] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.631640] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.631663] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.631681] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.631699] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.631716] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.631729] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.631733] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.633528] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.633550] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.633555] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.633570] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.633573] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.633576] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.633578] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.634522] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.635519] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.635634] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.635637] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.635659] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.635677] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.635694] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.635711] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.635724] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.635728] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.638553] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.638585] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.638589] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.638608] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.638610] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.638613] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.638615] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.639544] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.640518] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.640638] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.640641] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.640665] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.640683] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.640700] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.640717] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.640730] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.640735] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.642526] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.642553] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.642557] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.642574] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.642576] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.642580] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.642582] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.643521] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.644517] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.644634] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.644637] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.644661] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.644678] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.644695] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.644711] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.644723] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.644728] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.646526] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.646554] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.646558] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.646575] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.646577] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.646580] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.646583] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.647520] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.648515] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.648629] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.648633] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.648656] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.648673] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.648690] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.648707] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.648721] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.648725] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.650525] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.650550] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.650554] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.650571] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.650573] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.650576] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.650578] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.651520] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.652514] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.652633] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.652637] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.652661] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.652680] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.652697] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.652714] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.652727] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.652731] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.655524] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.655555] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.655559] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.655577] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.655579] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.655583] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.655585] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.656519] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.657515] usb 1-2: Calling set_configuration
Sep 9 13:49:01 prizm kernel: [ 583.657639] usb 1-2: usb_disable_device nuking non-ep0 URBs
Sep 9 13:49:01 prizm kernel: [ 583.657643] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.657666] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.657684] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.657700] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.657717] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.657729] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.657734] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.659522] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 583.659549] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.659553] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.659570] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 583.659572] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 583.659575] usb 1-2: Power is set to 100mA
Sep 9 13:49:01 prizm kernel: [ 583.659577] usb 1-2: Sending first magic command
Sep 9 13:49:01 prizm kernel: [ 583.660516] usb 1-2: Sending second magic command
Sep 9 13:49:01 prizm kernel: [ 583.661506] usb 1-2: uhci_result_common: failed with status 440000
Sep 9 13:49:01 prizm kernel: [ 583.661518] usb 1-2: Second magic command failed: -71.
Sep 9 13:49:01 prizm kernel: [ 583.760363] hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0004
Sep 9 13:49:01 prizm kernel: [ 583.760377] ehci_hcd 0000:00:10.4: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
Sep 9 13:49:01 prizm kernel: [ 583.760384] hub 5-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
Sep 9 13:49:01 prizm kernel: [ 583.885625] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
Sep 9 13:49:01 prizm kernel: [ 583.941788] ehci_hcd 0000:00:10.4: port 2 full speed --> companion
Sep 9 13:49:01 prizm kernel: [ 583.941797] ehci_hcd 0000:00:10.4: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
Sep 9 13:49:01 prizm kernel: [ 583.941829] hub 5-0:1.0: port 2 not reset yet, waiting 50ms
Sep 9 13:49:01 prizm kernel: [ 583.997680] ehci_hcd 0000:00:10.4: GetStatus port 2 status 003802 POWER OWNER sig=j CSC
Sep 9 13:49:01 prizm kernel: [ 583.997713] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
Sep 9 13:49:01 prizm kernel: [ 583.997725] uhci_hcd 0000:00:10.0: port 2 portsc 009b,00
Sep 9 13:49:01 prizm kernel: [ 583.997737] hub 1-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
Sep 9 13:49:01 prizm kernel: [ 583.997740] usb 1-2: USB disconnect, address 2
Sep 9 13:49:01 prizm kernel: [ 583.997742] usb 1-2: unregistering device
Sep 9 13:49:01 prizm kernel: [ 583.997744] usb 1-2: usb_disable_device nuking all URBs
Sep 9 13:49:01 prizm kernel: [ 583.997750] usb 1-2: unregistering interface 1-2:1.0
Sep 9 13:49:01 prizm kernel: [ 583.997794] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
Sep 9 13:49:01 prizm kernel: [ 583.997815] usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
Sep 9 13:49:01 prizm kernel: [ 583.997833] usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
Sep 9 13:49:01 prizm kernel: [ 583.997851] usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
Sep 9 13:49:01 prizm kernel: [ 583.997866] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.997871] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 583.997926] usb_endpoint usbdev1.2_ep00: ep_device_release called for usbdev1.2_ep00
Sep 9 13:49:01 prizm kernel: [ 583.997954] usb 1-2: uevent
Sep 9 13:49:01 prizm kernel: [ 584.125617] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
Sep 9 13:49:01 prizm kernel: [ 584.237606] usb 1-2: new full speed USB device using uhci_hcd and address 3
Sep 9 13:49:01 prizm kernel: [ 584.373586] usb 1-2: ep0 maxpacket = 16
Sep 9 13:49:01 prizm kernel: [ 584.393318] usb 1-2: default language 0x0409
Sep 9 13:49:01 prizm kernel: [ 584.405319] usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
Sep 9 13:49:01 prizm kernel: [ 584.405326] usb 1-2: Product: BlackBerry Device
Sep 9 13:49:01 prizm kernel: [ 584.405328] usb 1-2: Manufacturer: Research In Motion
Sep 9 13:49:01 prizm kernel: [ 584.405366] usb 1-2: uevent
Sep 9 13:49:01 prizm kernel: [ 584.405385] usb 1-2: usb_probe_device
Sep 9 13:49:01 prizm kernel: [ 584.405435] usb 1-2: configuration #1 chosen from 1 choice
Sep 9 13:49:01 prizm kernel: [ 584.407317] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Sep 9 13:49:01 prizm kernel: [ 584.407342] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 584.407347] usb 1-2:1.0: uevent
Sep 9 13:49:01 prizm kernel: [ 584.407367] berry_charge 1-2:1.0: usb_probe_interface
Sep 9 13:49:01 prizm kernel: [ 584.407370] berry_charge 1-2:1.0: usb_probe_interface - got id
Sep 9 13:49:01 prizm kernel: [ 584.407373] usb 1-2: Power is set to 500mA
Sep 9 13:49:01 prizm kernel: [ 584.407375] usb 1-2: device is already charging, power is set to 500mA
Sep 9 13:49:01 prizm kernel: [ 584.407498] drivers/usb/core/inode.c: creating file '003'
Sep 9 13:49:01 prizm kernel: [ 584.407509] hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0004
Sep 9 13:49:01 prizm kernel: [ 584.407520] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
Sep 9 13:49:03 prizm kernel: [ 586.405512] usb 1-2: usb auto-suspend
Sep 9 13:49:03 prizm kernel: [ 586.421471] hub 5-0:1.0: hub_suspend
Sep 9 13:49:03 prizm kernel: [ 586.421481] ehci_hcd 0000:00:10.4: suspend root hub
Sep 9 13:49:03 prizm kernel: [ 586.421496] usb usb5: usb auto-suspend
Sep 9 13:49:05 prizm kernel: [ 588.421351] hub 1-0:1.0: hub_suspend
Sep 9 13:49:05 prizm kernel: [ 588.421361] usb usb1: suspend_rh
Sep 9 13:49:05 prizm kernel: [ 588.421481] usb usb1: usb auto-suspend
On Sun, Sep 09, 2007 at 02:43:56PM -0400, Matt LaPlante wrote:
> On Sun, 9 Sep 2007 03:52:12 -0700
> Greg KH <[email protected]> wrote:
>
> > On Sat, Sep 08, 2007 at 10:02:29PM -0400, Matt LaPlante wrote:
> > > I'm running the 2.6.22.6 kernel with the berry_charge module loaded.
> > > I connect my 8700c via USB, but the blackberry does not appear to
> > > charge. The power icon does not change, and even after staying
> > > connected for an extended period, the device does not appear to be
> > > gaining any power. The cable is good, as I can plug it into my
> > > Windows machine and it begins charging immediately. I see the
> > > following in dmesg:
> > >
> > > [ 6638.606493] usb 1-2: new full speed USB device using uhci_hcd and address 2
> > > [ 6638.776524] usb 1-2: configuration #1 chosen from 1 choice
> > > [ 6639.639611] usbcore: registered new interface driver berry_charge
> > > [ 6639.837097] usb 1-2: Second magic command failed: -71.
> >
> >
> > Ick, that's not nice. Can you enable CONFIG_USB_DEBUG and debugging for
> > the berry_charge driver:
> > modprobe berry_charge debug=1
> >
> > and let us know what happens?
>
> Here you go...
This looks really odd:
> Sep 9 13:49:00 prizm kernel: [ 583.455679] berry_charge 1-2:1.0: usb_probe_interface
> Sep 9 13:49:00 prizm kernel: [ 583.455681] berry_charge 1-2:1.0: usb_probe_interface - got id
> Sep 9 13:49:00 prizm kernel: [ 583.455685] usb 1-2: Power is set to 100mA
> Sep 9 13:49:00 prizm kernel: [ 583.455687] usb 1-2: Sending first magic command
> Sep 9 13:49:00 prizm kernel: [ 583.457577] usb 1-2: Sending second magic command
> Sep 9 13:49:00 prizm kernel: [ 583.458578] usb 1-2: Calling set_configuration
> Sep 9 13:49:00 prizm kernel: [ 583.458727] drivers/usb/core/inode.c: creating file '002'
> Sep 9 13:49:00 prizm kernel: [ 583.458741] usb 1-2: usb_disable_device nuking non-ep0 URBs
> Sep 9 13:49:00 prizm kernel: [ 583.458744] usb 1-2: unregistering interface 1-2:1.0
Ok, we send everything properly but then things get wierd:
> Sep 9 13:49:00 prizm kernel: [ 583.461732] berry_charge 1-2:1.0: usb_probe_interface
> Sep 9 13:49:00 prizm kernel: [ 583.461734] berry_charge 1-2:1.0: usb_probe_interface - got id
> Sep 9 13:49:00 prizm kernel: [ 583.461738] usb 1-2: Power is set to 100mA
> Sep 9 13:49:00 prizm kernel: [ 583.461740] usb 1-2: Sending first magic command
> Sep 9 13:49:00 prizm kernel: [ 583.462615] usb 1-2: Sending second magic command
> Sep 9 13:49:00 prizm kernel: [ 583.463568] usb 1-2: Calling set_configuration
> Sep 9 13:49:00 prizm kernel: [ 583.463679] usb 1-2: usb_disable_device nuking non-ep0 URBs
> Sep 9 13:49:00 prizm kernel: [ 583.463683] usb 1-2: unregistering interface 1-2:1.0
We do it again.
> Sep 9 13:49:00 prizm kernel: [ 583.465623] berry_charge 1-2:1.0: usb_probe_interface
> Sep 9 13:49:00 prizm kernel: [ 583.465625] berry_charge 1-2:1.0: usb_probe_interface - got id
> Sep 9 13:49:00 prizm kernel: [ 583.465642] usb 1-2: Power is set to 100mA
> Sep 9 13:49:00 prizm kernel: [ 583.465644] usb 1-2: Sending first magic command
> Sep 9 13:49:00 prizm kernel: [ 583.466570] usb 1-2: Sending second magic command
> Sep 9 13:49:00 prizm kernel: [ 583.467566] usb 1-2: Calling set_configuration
> Sep 9 13:49:00 prizm kernel: [ 583.467675] usb 1-2: usb_disable_device nuking non-ep0 URBs
> Sep 9 13:49:00 prizm kernel: [ 583.467679] usb 1-2: unregistering interface 1-2:1.0
And again.
> Sep 9 13:49:00 prizm kernel: [ 583.469613] berry_charge 1-2:1.0: usb_probe_interface
> Sep 9 13:49:00 prizm kernel: [ 583.469616] berry_charge 1-2:1.0: usb_probe_interface - got id
> Sep 9 13:49:00 prizm kernel: [ 583.469619] usb 1-2: Power is set to 100mA
> Sep 9 13:49:00 prizm kernel: [ 583.469621] usb 1-2: Sending first magic command
> Sep 9 13:49:00 prizm kernel: [ 583.470568] usb 1-2: Sending second magic command
> Sep 9 13:49:00 prizm kernel: [ 583.471565] usb 1-2: Calling set_configuration
> Sep 9 13:49:00 prizm kernel: [ 583.471671] usb 1-2: usb_disable_device nuking non-ep0 URBs
> Sep 9 13:49:00 prizm kernel: [ 583.471674] usb 1-2: unregistering interface 1-2:1.0
And so on, numerous times.
This continues for a long time, until finally:
> Sep 9 13:49:01 prizm kernel: [ 583.659570] berry_charge 1-2:1.0: usb_probe_interface
> Sep 9 13:49:01 prizm kernel: [ 583.659572] berry_charge 1-2:1.0: usb_probe_interface - got id
> Sep 9 13:49:01 prizm kernel: [ 583.659575] usb 1-2: Power is set to 100mA
> Sep 9 13:49:01 prizm kernel: [ 583.659577] usb 1-2: Sending first magic command
> Sep 9 13:49:01 prizm kernel: [ 583.660516] usb 1-2: Sending second magic command
> Sep 9 13:49:01 prizm kernel: [ 583.661506] usb 1-2: uhci_result_common: failed with status 440000
> Sep 9 13:49:01 prizm kernel: [ 583.661518] usb 1-2: Second magic command failed: -71.
The command fails, and _then_ the blackberry finally resets itself:
> Sep 9 13:49:01 prizm kernel: [ 583.760363] hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0004
> Sep 9 13:49:01 prizm kernel: [ 583.760377] ehci_hcd 0000:00:10.4: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
> Sep 9 13:49:01 prizm kernel: [ 583.760384] hub 5-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
> Sep 9 13:49:01 prizm kernel: [ 583.885625] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
> Sep 9 13:49:01 prizm kernel: [ 583.941788] ehci_hcd 0000:00:10.4: port 2 full speed --> companion
> Sep 9 13:49:01 prizm kernel: [ 583.941797] ehci_hcd 0000:00:10.4: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
> Sep 9 13:49:01 prizm kernel: [ 583.941829] hub 5-0:1.0: port 2 not reset yet, waiting 50ms
> Sep 9 13:49:01 prizm kernel: [ 583.997680] ehci_hcd 0000:00:10.4: GetStatus port 2 status 003802 POWER OWNER sig=j CSC
> Sep 9 13:49:01 prizm kernel: [ 583.997713] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
> Sep 9 13:49:01 prizm kernel: [ 583.997725] uhci_hcd 0000:00:10.0: port 2 portsc 009b,00
> Sep 9 13:49:01 prizm kernel: [ 583.997737] hub 1-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
> Sep 9 13:49:01 prizm kernel: [ 583.997740] usb 1-2: USB disconnect, address 2
> Sep 9 13:49:01 prizm kernel: [ 583.997742] usb 1-2: unregistering device
> Sep 9 13:49:01 prizm kernel: [ 583.997744] usb 1-2: usb_disable_device nuking all URBs
> Sep 9 13:49:01 prizm kernel: [ 583.997750] usb 1-2: unregistering interface 1-2:1.0
And the device comes back like expected:
> Sep 9 13:49:01 prizm kernel: [ 584.237606] usb 1-2: new full speed USB device using uhci_hcd and address 3
> Sep 9 13:49:01 prizm kernel: [ 584.373586] usb 1-2: ep0 maxpacket = 16
> Sep 9 13:49:01 prizm kernel: [ 584.393318] usb 1-2: default language 0x0409
> Sep 9 13:49:01 prizm kernel: [ 584.405319] usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
> Sep 9 13:49:01 prizm kernel: [ 584.405326] usb 1-2: Product: BlackBerry Device
> Sep 9 13:49:01 prizm kernel: [ 584.405328] usb 1-2: Manufacturer: Research In Motion
> Sep 9 13:49:01 prizm kernel: [ 584.405366] usb 1-2: uevent
> Sep 9 13:49:01 prizm kernel: [ 584.405385] usb 1-2: usb_probe_device
> Sep 9 13:49:01 prizm kernel: [ 584.405435] usb 1-2: configuration #1 chosen from 1 choice
> Sep 9 13:49:01 prizm kernel: [ 584.407317] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
> Sep 9 13:49:01 prizm kernel: [ 584.407342] usb 1-2:1.0: uevent
> Sep 9 13:49:01 prizm kernel: [ 584.407347] usb 1-2:1.0: uevent
> Sep 9 13:49:01 prizm kernel: [ 584.407367] berry_charge 1-2:1.0: usb_probe_interface
> Sep 9 13:49:01 prizm kernel: [ 584.407370] berry_charge 1-2:1.0: usb_probe_interface - got id
> Sep 9 13:49:01 prizm kernel: [ 584.407373] usb 1-2: Power is set to 500mA
> Sep 9 13:49:01 prizm kernel: [ 584.407375] usb 1-2: device is already charging, power is set to 500mA
And the device is properly charging.
So, it should all be working now, it's just that we kept sending things
over and over and over, which is very strange.
> Sep 9 13:49:01 prizm kernel: [ 584.407498] drivers/usb/core/inode.c: creating file '003'
> Sep 9 13:49:01 prizm kernel: [ 584.407509] hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0004
> Sep 9 13:49:01 prizm kernel: [ 584.407520] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
> Sep 9 13:49:03 prizm kernel: [ 586.405512] usb 1-2: usb auto-suspend
> Sep 9 13:49:03 prizm kernel: [ 586.421471] hub 5-0:1.0: hub_suspend
> Sep 9 13:49:03 prizm kernel: [ 586.421481] ehci_hcd 0000:00:10.4: suspend root hub
> Sep 9 13:49:03 prizm kernel: [ 586.421496] usb usb5: usb auto-suspend
> Sep 9 13:49:05 prizm kernel: [ 588.421351] hub 1-0:1.0: hub_suspend
> Sep 9 13:49:05 prizm kernel: [ 588.421361] usb usb1: suspend_rh
> Sep 9 13:49:05 prizm kernel: [ 588.421481] usb usb1: usb auto-suspend
Ah, oh wait, now we just turned the power off.
Try disabling CONFIG_USB_SUSPEND and see if that fixes this issue. Or
you can manually turn the power back on to your blackberry by writing to
the autosuspend file for the usb device in sysfs, but that can be a
pain.
Let me know if just changing that config option works for you.
thanks,
greg k-h
On Mon, 10 Sep 2007 23:35:02 -0700
Greg KH <[email protected]> wrote:
>
> > Sep 9 13:49:01 prizm kernel: [ 584.407498] drivers/usb/core/inode.c: creating file '003'
> > Sep 9 13:49:01 prizm kernel: [ 584.407509] hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0004
> > Sep 9 13:49:01 prizm kernel: [ 584.407520] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
> > Sep 9 13:49:03 prizm kernel: [ 586.405512] usb 1-2: usb auto-suspend
> > Sep 9 13:49:03 prizm kernel: [ 586.421471] hub 5-0:1.0: hub_suspend
> > Sep 9 13:49:03 prizm kernel: [ 586.421481] ehci_hcd 0000:00:10.4: suspend root hub
> > Sep 9 13:49:03 prizm kernel: [ 586.421496] usb usb5: usb auto-suspend
> > Sep 9 13:49:05 prizm kernel: [ 588.421351] hub 1-0:1.0: hub_suspend
> > Sep 9 13:49:05 prizm kernel: [ 588.421361] usb usb1: suspend_rh
> > Sep 9 13:49:05 prizm kernel: [ 588.421481] usb usb1: usb auto-suspend
>
> Ah, oh wait, now we just turned the power off.
>
> Try disabling CONFIG_USB_SUSPEND and see if that fixes this issue. Or
> you can manually turn the power back on to your blackberry by writing to
> the autosuspend file for the usb device in sysfs, but that can be a
> pain.
>
> Let me know if just changing that config option works for you.
>
And now for the dramatic conclusion...
To begin, I have no access to the original machine at the moment, as I'm now out of that area for a couple weeks. I built a similar kernel (same version) on another box that I have at my current location. The new machine is different hardware, so some kernel re-configuring was required, but I kept with the same USB settings (and similar overall design). Interestingly, this machine didn't reproduce the "magic command failed" error, but it did fail very similarly to the original at charging the device. I disabled CONFIG_USB_SUSPEND as suggested, and lo and behold, it now charges the berry. Looks like an excellent diagnosis to me, doctor.
Thanks! :)
> thanks,
>
> greg k-h
--
Matt