Timekeeping resume adjusts xtime by adding the slept time in seconds and
resets the reference value of the clock source (clock->cycle_last).
clock->cycle last is used to calculate the delta between the last xtime
update and the readout of the clock source in __get_nsec_offset(). xtime
plus the offset is the current time. The resume code ignores the delta
which had already elapsed between the last xtime update and the actual
time of suspend. If the suspend time is short, then we can see time
going backwards on resume.
Suspend:
offs_s = clock->read() - clock->cycle_last;
now = xtime + offs_s;
timekeeping_suspend_time = read_rtc();
Resume:
sleep_time = read_rtc() - timekeeping_suspend_time;
xtime.tv_sec += sleep_time;
clock->cycle_last = clock->read();
offs_r = clock->read() - clock->cycle_last;
now = xtime + offs_r;
if sleep_time_seconds == 0 and offs_r < offs_s, then time goes
backwards.
Fix this by storing the offset from the last xtime update and add it to
xtime during resume, when we reset clock->cycle_last:
sleep_time = read_rtc() - timekeeping_suspend_time;
xtime.tv_sec += sleep_time;
xtime += offs_s; /* Fixup xtime offset at suspend time */
clock->cycle_last = clock->read();
offs_r = clock->read() - clock->cycle_last;
now = xtime + offs_r;
Thanks to Marcelo for tracking this down on the OLPC and providing the
necessary details to analyze the root cause.
Signed-off-by: Thomas Gleixner <[email protected]>
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -280,6 +280,8 @@ void __init timekeeping_init(void)
static int timekeeping_suspended;
/* time in seconds when suspend began */
static unsigned long timekeeping_suspend_time;
+/* xtime offset when we went into suspend */
+static s64 timekeeping_suspend_offset;
/**
* timekeeping_resume - Resumes the generic timekeeping subsystem.
@@ -305,6 +307,8 @@ static int timekeeping_resume(struct sys_device *dev)
wall_to_monotonic.tv_sec -= sleep_length;
total_sleep_time += sleep_length;
}
+ /* Make sure that we have the correct xtime reference */
+ timespec_add_ns(&xtime, timekeeping_suspend_offset);
/* re-base the last cycle value */
clock->cycle_last = clocksource_read(clock);
clock->error = 0;
@@ -326,6 +330,8 @@ static int timekeeping_suspend(struct sys_device *dev, pm_message_t state)
unsigned long flags;
write_seqlock_irqsave(&xtime_lock, flags);
timekeeping_suspended = 1;
+ /* Get the current xtime offset */
+ timekeeping_suspend_offset = __get_nsec_offset();
timekeeping_suspend_time = read_persistent_clock();
write_sequnlock_irqrestore(&xtime_lock, flags);
Patch below fixes the problem we were seeing (negative delta calculated
in tick_do_update_jiffies64).
Thanks again Thomas!
On Wed, Sep 12, 2007 at 12:36:34AM +0200, Thomas Gleixner wrote:
> Timekeeping resume adjusts xtime by adding the slept time in seconds and
> resets the reference value of the clock source (clock->cycle_last).
> clock->cycle last is used to calculate the delta between the last xtime
> update and the readout of the clock source in __get_nsec_offset(). xtime
> plus the offset is the current time. The resume code ignores the delta
> which had already elapsed between the last xtime update and the actual
> time of suspend. If the suspend time is short, then we can see time
> going backwards on resume.
>
> Suspend:
> offs_s = clock->read() - clock->cycle_last;
> now = xtime + offs_s;
> timekeeping_suspend_time = read_rtc();
>
> Resume:
> sleep_time = read_rtc() - timekeeping_suspend_time;
> xtime.tv_sec += sleep_time;
> clock->cycle_last = clock->read();
> offs_r = clock->read() - clock->cycle_last;
> now = xtime + offs_r;
>
> if sleep_time_seconds == 0 and offs_r < offs_s, then time goes
> backwards.
>
> Fix this by storing the offset from the last xtime update and add it to
> xtime during resume, when we reset clock->cycle_last:
>
> sleep_time = read_rtc() - timekeeping_suspend_time;
> xtime.tv_sec += sleep_time;
> xtime += offs_s; /* Fixup xtime offset at suspend time */
> clock->cycle_last = clock->read();
> offs_r = clock->read() - clock->cycle_last;
> now = xtime + offs_r;
>
> Thanks to Marcelo for tracking this down on the OLPC and providing the
> necessary details to analyze the root cause.
>
> Signed-off-by: Thomas Gleixner <[email protected]>
>
> --- a/kernel/time/timekeeping.c
> +++ b/kernel/time/timekeeping.c
> @@ -280,6 +280,8 @@ void __init timekeeping_init(void)
> static int timekeeping_suspended;
> /* time in seconds when suspend began */
> static unsigned long timekeeping_suspend_time;
> +/* xtime offset when we went into suspend */
> +static s64 timekeeping_suspend_offset;
>
> /**
> * timekeeping_resume - Resumes the generic timekeeping subsystem.
> @@ -305,6 +307,8 @@ static int timekeeping_resume(struct sys_device *dev)
> wall_to_monotonic.tv_sec -= sleep_length;
> total_sleep_time += sleep_length;
> }
> + /* Make sure that we have the correct xtime reference */
> + timespec_add_ns(&xtime, timekeeping_suspend_offset);
> /* re-base the last cycle value */
> clock->cycle_last = clocksource_read(clock);
> clock->error = 0;
> @@ -326,6 +330,8 @@ static int timekeeping_suspend(struct sys_device *dev, pm_message_t state)
> unsigned long flags;
>
> write_seqlock_irqsave(&xtime_lock, flags);
> timekeeping_suspended = 1;
> + /* Get the current xtime offset */
> + timekeeping_suspend_offset = __get_nsec_offset();
> timekeeping_suspend_time = read_persistent_clock();
> write_sequnlock_irqrestore(&xtime_lock, flags);
>
On Wed, 12 Sep 2007 00:36:34 +0200 Thomas Gleixner <[email protected]> wrote:
> Timekeeping resume adjusts xtime by adding the slept time in seconds and
> resets the reference value of the clock source (clock->cycle_last).
> clock->cycle last is used to calculate the delta between the last xtime
> update and the readout of the clock source in __get_nsec_offset(). xtime
> plus the offset is the current time. The resume code ignores the delta
> which had already elapsed between the last xtime update and the actual
> time of suspend. If the suspend time is short, then we can see time
> going backwards on resume.
>
> Suspend:
> offs_s = clock->read() - clock->cycle_last;
> now = xtime + offs_s;
> timekeeping_suspend_time = read_rtc();
>
> Resume:
> sleep_time = read_rtc() - timekeeping_suspend_time;
> xtime.tv_sec += sleep_time;
> clock->cycle_last = clock->read();
> offs_r = clock->read() - clock->cycle_last;
> now = xtime + offs_r;
>
> if sleep_time_seconds == 0 and offs_r < offs_s, then time goes
> backwards.
>
> Fix this by storing the offset from the last xtime update and add it to
> xtime during resume, when we reset clock->cycle_last:
>
> sleep_time = read_rtc() - timekeeping_suspend_time;
> xtime.tv_sec += sleep_time;
> xtime += offs_s; /* Fixup xtime offset at suspend time */
> clock->cycle_last = clock->read();
> offs_r = clock->read() - clock->cycle_last;
> now = xtime + offs_r;
>
> Thanks to Marcelo for tracking this down on the OLPC and providing the
> necessary details to analyze the root cause.
>
> Signed-off-by: Thomas Gleixner <[email protected]>
>
> --- a/kernel/time/timekeeping.c
> +++ b/kernel/time/timekeeping.c
> @@ -280,6 +280,8 @@ void __init timekeeping_init(void)
> static int timekeeping_suspended;
> /* time in seconds when suspend began */
> static unsigned long timekeeping_suspend_time;
> +/* xtime offset when we went into suspend */
> +static s64 timekeeping_suspend_offset;
>
> /**
> * timekeeping_resume - Resumes the generic timekeeping subsystem.
> @@ -305,6 +307,8 @@ static int timekeeping_resume(struct sys_device *dev)
> wall_to_monotonic.tv_sec -= sleep_length;
> total_sleep_time += sleep_length;
> }
> + /* Make sure that we have the correct xtime reference */
> + timespec_add_ns(&xtime, timekeeping_suspend_offset);
> /* re-base the last cycle value */
> clock->cycle_last = clocksource_read(clock);
> clock->error = 0;
> @@ -326,6 +330,8 @@ static int timekeeping_suspend(struct sys_device *dev, pm_message_t state)
> unsigned long flags;
>
> write_seqlock_irqsave(&xtime_lock, flags);
> timekeeping_suspended = 1;
> + /* Get the current xtime offset */
> + timekeeping_suspend_offset = __get_nsec_offset();
> timekeeping_suspend_time = read_persistent_clock();
> write_sequnlock_irqrestore(&xtime_lock, flags);
>
kernel/time/timekeeping.c: In function 'timekeeping_suspend':
kernel/time/timekeeping.c:335: error: implicit declaration of function '__get_nsec_offset'
sparc32, and presumably anything with CONFIG_GENERIC_TIME=n
Timekeeping resume adjusts xtime by adding the slept time in seconds and
resets the reference value of the clock source (clock->cycle_last).
clock->cycle last is used to calculate the delta between the last xtime
update and the readout of the clock source in __get_nsec_offset(). xtime
plus the offset is the current time. The resume code ignores the delta
which had already elapsed between the last xtime update and the actual
time of suspend. If the suspend time is short, then we can see time
going backwards on resume.
Suspend:
offs_s = clock->read() - clock->cycle_last;
now = xtime + offs_s;
timekeeping_suspend_time = read_rtc();
Resume:
sleep_time = read_rtc() - timekeeping_suspend_time;
xtime.tv_sec += sleep_time;
clock->cycle_last = clock->read();
offs_r = clock->read() - clock->cycle_last;
now = xtime + offs_r;
if sleep_time_seconds == 0 and offs_r < offs_s, then time goes
backwards.
Fix this by storing the offset from the last xtime update and add it to
xtime during resume, when we reset clock->cycle_last:
sleep_time = read_rtc() - timekeeping_suspend_time;
xtime.tv_sec += sleep_time;
xtime += offs_s; /* Fixup xtime offset at suspend time */
clock->cycle_last = clock->read();
offs_r = clock->read() - clock->cycle_last;
now = xtime + offs_r;
Thanks to Marcelo for tracking this down on the OLPC and providing the
necessary details to analyze the root cause.
Signed-off-by: Thomas Gleixner <[email protected]>
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index acc417b..a9cce59 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -217,6 +217,7 @@ static void change_clocksource(void)
}
#else
static inline void change_clocksource(void) { }
+static inline s64 __get_nsec_offset(void) { return 0; }
#endif
/**
@@ -280,6 +281,8 @@ void __init timekeeping_init(void)
static int timekeeping_suspended;
/* time in seconds when suspend began */
static unsigned long timekeeping_suspend_time;
+/* xtime offset when we went into suspend */
+static s64 timekeeping_suspend_nsecs;
/**
* timekeeping_resume - Resumes the generic timekeeping subsystem.
@@ -305,6 +308,8 @@ static int timekeeping_resume(struct sys_device *dev)
wall_to_monotonic.tv_sec -= sleep_length;
total_sleep_time += sleep_length;
}
+ /* Make sure that we have the correct xtime reference */
+ timespec_add_ns(&xtime, timekeeping_suspend_nsecs);
/* re-base the last cycle value */
clock->cycle_last = clocksource_read(clock);
clock->error = 0;
@@ -326,6 +331,8 @@ static int timekeeping_suspend(struct sys_device *dev, pm_message_t state)
unsigned long flags;
write_seqlock_irqsave(&xtime_lock, flags);
+ /* Get the current xtime offset */
+ timekeeping_suspend_nsecs = __get_nsec_offset();
timekeeping_suspended = 1;
timekeeping_suspend_time = read_persistent_clock();
write_sequnlock_irqrestore(&xtime_lock, flags);