2008-01-30 21:39:59

by Konrad Rzeszutek Wilk

[permalink] [raw]
Subject: [PATCH] Add iSCSI iBFT support (v0.4.6)


This patch (v0.4.6) adds /sysfs/firmware/ibft/[initiator|targetX|ethernetX]
directories along with text properties which export the the iSCSI
Boot Firmware Table (iBFT) structure.

What is iSCSI Boot Firmware Table? It is a mechanism for the iSCSI
tools to extract from the machine NICs the iSCSI connection information
so that they can automagically mount the iSCSI share/target. Currently
the iSCSI information is hard-coded in the initrd. The /sysfs entries
are read-only one-name-and-value fields.

The usual set of data exposed is:

# for a in `find /sys/firmware/ibft/ -type f -print`; do echo -n "$a: "; cat $a; done
/sys/firmware/ibft/target0/target-name: iqn.2007.com.intel-sbx44:storage-10gb
/sys/firmware/ibft/target0/nic-assoc: 0
/sys/firmware/ibft/target0/chap-type: 0
/sys/firmware/ibft/target0/lun: 00000000
/sys/firmware/ibft/target0/port: 3260
/sys/firmware/ibft/target0/ip-addr: 192.168.79.116
/sys/firmware/ibft/target0/flags: 3
/sys/firmware/ibft/target0/index: 0
/sys/firmware/ibft/ethernet0/mac: 00:11:25:9d:8b:01
/sys/firmware/ibft/ethernet0/vlan: 0
/sys/firmware/ibft/ethernet0/gateway: 192.168.79.254
/sys/firmware/ibft/ethernet0/origin: 0
/sys/firmware/ibft/ethernet0/subnet-mask: 255.255.252.0
/sys/firmware/ibft/ethernet0/ip-addr: 192.168.77.41
/sys/firmware/ibft/ethernet0/flags: 7
/sys/firmware/ibft/ethernet0/index: 0
/sys/firmware/ibft/initiator/initiator-name: iqn.2007-07.com:konrad.initiator
/sys/firmware/ibft/initiator/flags: 3
/sys/firmware/ibft/initiator/index: 0


For full details of the IBFT structure please take a look at:
ftp://ftp.software.ibm.com/systems/support/system_x_pdf/ibm_iscsi_boot_firmware_table_v1.02.pdf

Signed-off-by: Konrad Rzeszutek <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Peter Jones <[email protected]>

---

Documentation/ABI/testing/sysfs-ibft | 23
arch/x86/kernel/setup_32.c | 3
arch/x86/kernel/setup_64.c | 4
drivers/firmware/Kconfig | 20
drivers/firmware/Makefile | 2
drivers/firmware/iscsi_ibft.c | 988 +++++++++++++++++++++++++++++++++++
drivers/firmware/iscsi_ibft_find.c | 77 ++
include/linux/iscsi_ibft.h | 52 +
8 files changed, 1169 insertions(+)


diff --git a/Documentation/ABI/testing/sysfs-ibft b/Documentation/ABI/testing/sysfs-ibft
new file mode 100644
index 0000000..062c009
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-ibft
@@ -0,0 +1,23 @@
+What: /sys/firmware/ibft/initiator
+Date: November 2007
+Contact: Konrad Rzeszutek <[email protected]>
+Description: The /sys/firmware/ibft/initiator directory will contain
+ files that expose the iSCSI Boot Firmware Table initiator data.
+ Usually this contains the Initiator name.
+
+What: /sys/firmware/ibft/targetX
+Date: November 2007
+Contact: Konrad Rzeszutek <[email protected]>
+Description: The /sys/firmware/ibft/targetX directory will contain
+ files that expose the iSCSI Boot Firmware Table target data.
+ Usually this contains the target's IP address, boot LUN,
+ target name, and what NIC it is associated with. It can also
+ contain the CHAP name (and password), the reverse CHAP
+ name (and password)
+
+What: /sys/firmware/ibft/ethernetX
+Date: November 2007
+Contact: Konrad Rzeszutek <[email protected]>
+Description: The /sys/firmware/ibft/ethernetX directory will contain
+ files that expose the iSCSI Boot Firmware Table NIC data.
+ This can this can the IP address, MAC, and gateway of the NIC.
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index 9c24b45..5da7b8d 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -39,6 +39,7 @@
#include <linux/efi.h>
#include <linux/init.h>
#include <linux/edd.h>
+#include <linux/iscsi_ibft.h>
#include <linux/nodemask.h>
#include <linux/kexec.h>
#include <linux/crash_dump.h>
@@ -496,6 +497,8 @@ void __init setup_bootmem_allocator(void)
}
#endif
reserve_crashkernel();
+
+ reserve_ibft_region();
}

/*
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 30d94d1..3393f2d 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -33,6 +33,7 @@
#include <linux/acpi.h>
#include <linux/kallsyms.h>
#include <linux/edd.h>
+#include <linux/iscsi_ibft.h>
#include <linux/mmzone.h>
#include <linux/kexec.h>
#include <linux/cpufreq.h>
@@ -403,6 +404,9 @@ void __init setup_arch(char **cmdline_p)
}
#endif
reserve_crashkernel();
+
+ reserve_ibft_region();
+
paging_init();

#ifdef CONFIG_PCI
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 05f02a3..81a3e59 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -93,4 +93,24 @@ config DMIID
information from userspace through /sys/class/dmi/id/ or if you want
DMI-based module auto-loading.

+config ISCSI_IBFT_FIND
+ bool "iSCSI Boot Firmware Table Attributes"
+ depends on X86 || IA64
+ default n
+ help
+ This option enables the kernel to find the region of memory
+ in which the ISCSI Boot Firmware Table (iBFT) resides. This
+ is necessary for iSCSI Boot Firmware Table Attributes module to work
+ properly.
+
+config ISCSI_IBFT
+ tristate "iSCSI Boot Firmware Table Attributes module"
+ depends on ISCSI_IBFT_FIND
+ default n
+ help
+ This option enables support for detection and exposing of iSCSI
+ Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to
+ detect iSCSI boot parameters dynamically during system boot, say Y.
+ Otherwise, say N.
+
endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 8d4ebc8..4c91471 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -8,3 +8,5 @@ obj-$(CONFIG_EFI_PCDP) += pcdp.o
obj-$(CONFIG_DELL_RBU) += dell_rbu.o
obj-$(CONFIG_DCDBAS) += dcdbas.o
obj-$(CONFIG_DMIID) += dmi-id.o
+obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o
+obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
new file mode 100644
index 0000000..2185540
--- /dev/null
+++ b/drivers/firmware/iscsi_ibft.c
@@ -0,0 +1,988 @@
+/*
+ * Copyright 2007 Red Hat, Inc.
+ * by Peter Jones <[email protected]>
+ * Copyright 2008 IBM, Inc.
+ * by Konrad Rzeszutek <[email protected]>
+ *
+ * This code exposes the iSCSI Boot Format Table to userland via sysfs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Changelog:
+ *
+ * 30 Jan 2008 - Konrad Rzeszutek <[email protected]>
+ * Added logic to handle IPv6 addresses. (v0.4.6)
+ *
+ * 25 Jan 2008 - Konrad Rzeszutek <[email protected]>
+ * Added logic to handle badly not-to-spec iBFT. (v0.4.5)
+ *
+ * 4 Jan 2008 - Konrad Rzeszutek <[email protected]>
+ * Added __init to function declarations. (v0.4.4)
+ *
+ * 21 Dec 2007 - Konrad Rzeszutek <[email protected]>
+ * Updated kobject registration, combined unregister functions in one
+ * and code and style cleanup. (v0.4.3)
+ *
+ * 5 Dec 2007 - Konrad Rzeszutek <[email protected]>
+ * Added end-markers to enums and re-organized kobject registration. (v0.4.2)
+ *
+ * 4 Dec 2007 - Konrad Rzeszutek <[email protected]>
+ * Created 'device' sysfs link to the NIC and style cleanup. (v0.4.1)
+ *
+ * 28 Nov 2007 - Konrad Rzeszutek <[email protected]>
+ * Added sysfs-ibft documentation, moved 'find_ibft' function to
+ * in its own file and added text attributes for every struct field. (v0.4)
+ *
+ * 21 Nov 2007 - Konrad Rzeszutek <[email protected]>
+ * Added text attributes emulating OpenFirmware /proc/device-tree naming.
+ * Removed binary /sysfs interface (v0.3)
+ *
+ * 29 Aug 2007 - Konrad Rzeszutek <[email protected]>
+ * Added functionality in setup.c to reserve iBFT region. (v0.2)
+ *
+ * 27 Aug 2007 - Konrad Rzeszutek <[email protected]>
+ * First version exposing iBFT data via a binary /sysfs. (v0.1)
+ *
+ */
+
+
+#include <linux/blkdev.h>
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/iscsi_ibft.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#define IBFT_ISCSI_VERSION "0.4."
+#define IBFT_ISCSI_DATE "2008-Jan-30"
+
+MODULE_AUTHOR("Peter Jones <[email protected]> and \
+Konrad Rzeszutek <[email protected]>");
+MODULE_DESCRIPTION("sysfs interface to BIOS iBFT information");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(IBFT_ISCSI_VERSION);
+
+
+struct ibft_table_header {
+ char signature[4];
+ u32 length;
+ u8 revision;
+ u8 checksum;
+ char oem_id[6];
+ char oem_table_id[8];
+ char reserved[24];
+} __attribute__((__packed__));
+
+struct ibft_hdr {
+ u8 id;
+ u8 version;
+ u16 length;
+ u8 index;
+ u8 flags;
+} __attribute__((__packed__));
+
+struct ibft_control {
+ struct ibft_hdr hdr;
+ u16 extensions;
+ u16 initiator_off;
+ u16 nic0_off;
+ u16 tgt0_off;
+ u16 nic1_off;
+ u16 tgt1_off;
+} __attribute__((__packed__));
+
+struct ibft_initiator {
+ struct ibft_hdr hdr;
+ char isns_server[16];
+ char slp_server[16];
+ char pri_radius_server[16];
+ char sec_radius_server[16];
+ u16 initiator_name_len;
+ u16 initiator_name_off;
+} __attribute__((__packed__));
+
+struct ibft_nic {
+ struct ibft_hdr hdr;
+ char ip_addr[16];
+ u8 subnet_mask_prefix;
+ u8 origin;
+ char gateway[16];
+ char primary_dns[16];
+ char secondary_dns[16];
+ char dhcp[16];
+ u16 vlan;
+ char mac[6];
+ u16 pci_bdf;
+ u16 hostname_len;
+ u16 hostname_off;
+} __attribute__((__packed__));
+
+struct ibft_tgt {
+ struct ibft_hdr hdr;
+ char ip_addr[16];
+ u16 port;
+ char lun[8];
+ u8 chap_type;
+ u8 nic_assoc;
+ u16 tgt_name_len;
+ u16 tgt_name_off;
+ u16 chap_name_len;
+ u16 chap_name_off;
+ u16 chap_secret_len;
+ u16 chap_secret_off;
+ u16 rev_chap_name_len;
+ u16 rev_chap_name_off;
+ u16 rev_chap_secret_len;
+ u16 rev_chap_secret_off;
+} __attribute__((__packed__));
+
+/*
+ * The kobject different types and its names.
+ *
+*/
+enum ibft_id {
+ id_reserved = 0, /* We don't support. */
+ id_control = 1, /* Should show up only once and is not exported. */
+ id_initiator = 2,
+ id_nic = 3,
+ id_target = 4,
+ id_extensions = 5, /* We don't support. */
+ id_end_marker,
+};
+
+/*
+ * We do not support the other types, hence the NULL.
+ */
+static const char *ibft_id_names[] =
+ {NULL, NULL, "initiator", "ethernet%d", "target%d", NULL, NULL};
+
+/*
+ * The text attributes names for each of the kobjects.
+*/
+enum ibft_eth_properties_enum {
+ ibft_eth_index,
+ ibft_eth_flags,
+ ibft_eth_ip_addr,
+ ibft_eth_subnet_mask,
+ ibft_eth_origin,
+ ibft_eth_gateway,
+ ibft_eth_primary_dns,
+ ibft_eth_secondary_dns,
+ ibft_eth_dhcp,
+ ibft_eth_vlan,
+ ibft_eth_mac,
+ /* ibft_eth_pci_bdf - this is replaced by link to the device itself. */
+ ibft_eth_hostname,
+ ibft_eth_end_marker,
+};
+
+static const char *ibft_eth_properties[] =
+ {"index", "flags", "ip-addr", "subnet-mask", "origin", "gateway",
+ "primary-dns", "secondary-dns", "dhcp", "vlan", "mac", "hostname",
+ NULL};
+
+enum ibft_tgt_properties_enum {
+ ibft_tgt_index,
+ ibft_tgt_flags,
+ ibft_tgt_ip_addr,
+ ibft_tgt_port,
+ ibft_tgt_lun,
+ ibft_tgt_chap_type,
+ ibft_tgt_nic_assoc,
+ ibft_tgt_name,
+ ibft_tgt_chap_name,
+ ibft_tgt_chap_secret,
+ ibft_tgt_rev_chap_name,
+ ibft_tgt_rev_chap_secret,
+ ibft_tgt_end_marker,
+};
+
+static const char *ibft_tgt_properties[] =
+ {"index", "flags", "ip-addr", "port", "lun", "chap-type", "nic-assoc",
+ "target-name", "chap-name", "chap-secret", "rev-chap-name",
+ "rev-chap-name-secret", NULL};
+
+enum ibft_initiator_properties_enum {
+ ibft_init_index,
+ ibft_init_flags,
+ ibft_init_isns_server,
+ ibft_init_slp_server,
+ ibft_init_pri_radius_server,
+ ibft_init_sec_radius_server,
+ ibft_init_initiator_name,
+ ibft_init_end_marker,
+};
+
+static const char *ibft_initiator_properties[] =
+ {"index", "flags", "isns-server", "slp-server", "pri-radius-server",
+ "sec-radius-server", "initiator-name", NULL};
+
+/*
+ * The kobject and attribute structures.
+ */
+
+struct ibft_kobject {
+ struct ibft_table_header *header;
+ union {
+ struct ibft_initiator *initiator;
+ struct ibft_nic *nic;
+ struct ibft_tgt *tgt;
+ struct ibft_hdr *hdr;
+ };
+ struct kobject kobj;
+ struct list_head node;
+};
+
+struct ibft_attribute {
+ struct attribute attr;
+ ssize_t (*show) (struct ibft_kobject *entry,
+ struct ibft_attribute *attr, char *buf);
+ union {
+ struct ibft_initiator *initiator;
+ struct ibft_nic *nic;
+ struct ibft_tgt *tgt;
+ struct ibft_hdr *hdr;
+ };
+ struct kobject *kobj;
+ int type; /* The enum of the type. This can be any value off:
+ ibft_eth_properties_enum, ibft_tgt_properties_enum,
+ or ibft_initiator_properties_enum. */
+ struct list_head node;
+};
+
+static LIST_HEAD(ibft_attr_list);
+static LIST_HEAD(ibft_kobject_list);
+
+static const char nulls[16];
+static struct ibft_table_header *ibft_device;
+
+/*
+ * Helper functions to parse data properly.
+ */
+static ssize_t sprintf_ipaddr(char *buf, u8 *ip)
+{
+ char *str = buf;
+
+ if (ip[0] == 0 && ip[1] == 0 && ip[2] == 0 && ip[3] == 0 &&
+ ip[4] == 0 && ip[5] == 0 && ip[6] == 0 && ip[7] == 0 &&
+ ip[8] == 0 && ip[9] == 0 && ip[10] == 0xff && ip[11] == 0xff) {
+ /*
+ * IPV4
+ */
+ str += sprintf(buf, NIPQUAD_FMT, ip[12],
+ ip[13], ip[14], ip[15]);
+ } else {
+ /*
+ * IPv6
+ */
+ str += sprintf(str, NIP6_FMT, ntohs(ip[0]), ntohs(ip[1]),
+ ntohs(ip[2]), ntohs(ip[3]), ntohs(ip[4]),
+ ntohs(ip[5]), ntohs(ip[6]), ntohs(ip[7]));
+ }
+ str += sprintf(str, "\n");
+ return str - buf;
+}
+
+static ssize_t sprintf_string(char *str, int len, char *buf)
+{
+ return sprintf(str, "%.*s\n", len, buf);
+}
+
+/*
+ * Helper function to verify the IBFT header.
+ */
+static int ibft_verify_hdr(char *t, struct ibft_hdr *hdr, int id, int length)
+{
+ if (hdr->id != id) {
+ printk(KERN_ERR "iBFT error: The field header.id is " \
+ "expected %d but found %d!\n", \
+ id, hdr->id);
+ return -ENODEV;
+ }
+ if (hdr->length != length) {
+ printk(KERN_ERR "iBFT error: The field header.length is " \
+ "expected %d but found %d!\n", \
+ length, hdr->length);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void ibft_release(struct kobject *kobj)
+{
+ struct ibft_kobject *ibft =
+ container_of(kobj, struct ibft_kobject, kobj);
+ kfree(ibft);
+}
+
+/*
+ * Routines for reading of the iBFT data in a human readable fashion.
+ */
+ssize_t ibft_attr_show_initiator(struct ibft_kobject *entry,
+ struct ibft_attribute *attr,
+ char *buf)
+{
+ struct ibft_initiator *initiator = entry->initiator;
+ void *ibft_loc = entry->header;
+ char *str = buf;
+
+ if (!initiator)
+ return 0;
+
+ switch (attr->type) {
+ case ibft_init_index:
+ str += sprintf(str, "%d\n", initiator->hdr.index);
+ break;
+ case ibft_init_flags:
+ str += sprintf(str, "%d\n", initiator->hdr.flags);
+ break;
+ case ibft_init_isns_server:
+ str += sprintf_ipaddr(str, initiator->isns_server);
+ break;
+ case ibft_init_slp_server:
+ str += sprintf_ipaddr(str, initiator->slp_server);
+ break;
+ case ibft_init_pri_radius_server:
+ str += sprintf_ipaddr(str, initiator->pri_radius_server);
+ break;
+ case ibft_init_sec_radius_server:
+ str += sprintf_ipaddr(str, initiator->sec_radius_server);
+ break;
+ case ibft_init_initiator_name:
+ str += sprintf_string(str, initiator->initiator_name_len,
+ (char *)ibft_loc +
+ initiator->initiator_name_off);
+ break;
+ default:
+ break;
+ }
+
+ return str - buf;
+}
+
+ssize_t ibft_attr_show_nic(struct ibft_kobject *entry,
+ struct ibft_attribute *attr,
+ char *buf)
+{
+ struct ibft_nic *nic = entry->nic;
+ void *ibft_loc = entry->header;
+ char *str = buf;
+ char *mac;
+ int val;
+
+ if (!nic)
+ return 0;
+
+ switch (attr->type) {
+ case ibft_eth_index:
+ str += sprintf(str, "%d\n", nic->hdr.index);
+ break;
+ case ibft_eth_flags:
+ str += sprintf(str, "%d\n", nic->hdr.flags);
+ break;
+ case ibft_eth_ip_addr:
+ str += sprintf_ipaddr(str, nic->ip_addr);
+ break;
+ case ibft_eth_subnet_mask:
+ val = ~((1 << (32-nic->subnet_mask_prefix))-1);
+ str += sprintf(str, "%d.%d.%d.%d\n",
+ (u8)(val >> 24), (u8)(val >> 16),
+ (u8)(val >> 8), (u8)(val));
+ break;
+ case ibft_eth_origin:
+ str += sprintf(str, "%d\n", nic->origin);
+ break;
+ case ibft_eth_gateway:
+ str += sprintf_ipaddr(str, nic->gateway);
+ break;
+ case ibft_eth_primary_dns:
+ str += sprintf_ipaddr(str, nic->primary_dns);
+ break;
+ case ibft_eth_secondary_dns:
+ str += sprintf_ipaddr(str, nic->secondary_dns);
+ break;
+ case ibft_eth_dhcp:
+ str += sprintf_ipaddr(str, nic->dhcp);
+ break;
+ case ibft_eth_vlan:
+ str += sprintf(str, "%d\n", nic->vlan);
+ break;
+ case ibft_eth_mac:
+ mac = nic->mac;
+ str += sprintf(str, "%02x:%02x:%02x:%02x:%02x:%02x\n",
+ (u8)mac[0], (u8)mac[1], (u8)mac[2],
+ (u8)mac[3], (u8)mac[4], (u8)mac[5]);
+ break;
+ case ibft_eth_hostname:
+ str += sprintf_string(str, nic->hostname_len,
+ (char *)ibft_loc + nic->hostname_off);
+ break;
+ default:
+ break;
+ }
+
+ return str - buf;
+};
+
+ssize_t ibft_attr_show_target(struct ibft_kobject *entry,
+ struct ibft_attribute *attr,
+ char *buf)
+{
+ struct ibft_tgt *tgt = entry->tgt;
+ void *ibft_loc = entry->header;
+ char *str = buf;
+ int i;
+
+ if (!tgt)
+ return 0;
+
+ switch (attr->type) {
+ case ibft_tgt_index:
+ str += sprintf(str, "%d\n", tgt->hdr.index);
+ break;
+ case ibft_tgt_flags:
+ str += sprintf(str, "%d\n", tgt->hdr.flags);
+ break;
+ case ibft_tgt_ip_addr:
+ str += sprintf_ipaddr(str, tgt->ip_addr);
+ break;
+ case ibft_tgt_port:
+ str += sprintf(str, "%d\n", tgt->port);
+ break;
+ case ibft_tgt_lun:
+ for (i = 0; i < 8; i++)
+ str += sprintf(str, "%x", (u8)tgt->lun[i]);
+ str += sprintf(str, "\n");
+ break;
+ case ibft_tgt_nic_assoc:
+ str += sprintf(str, "%d\n", tgt->nic_assoc);
+ break;
+ case ibft_tgt_chap_type:
+ str += sprintf(str, "%d\n", tgt->chap_type);
+ break;
+ case ibft_tgt_name:
+ str += sprintf_string(str, tgt->tgt_name_len,
+ (char *)ibft_loc + tgt->tgt_name_off);
+ break;
+ case ibft_tgt_chap_name:
+ str += sprintf_string(str, tgt->chap_name_len,
+ (char *)ibft_loc + tgt->chap_name_off);
+ break;
+ case ibft_tgt_chap_secret:
+ str += sprintf_string(str, tgt->chap_secret_len,
+ (char *)ibft_loc + tgt->chap_secret_off);
+ break;
+ case ibft_tgt_rev_chap_name:
+ str += sprintf_string(str, tgt->rev_chap_name_len,
+ (char *)ibft_loc +
+ tgt->rev_chap_name_off);
+ break;
+ case ibft_tgt_rev_chap_secret:
+ str += sprintf_string(str, tgt->rev_chap_secret_len,
+ (char *)ibft_loc +
+ tgt->rev_chap_secret_off);
+ break;
+ default:
+ break;
+ }
+
+ return str - buf;
+}
+
+/*
+ * The main routine which allows the user to read the IBFT data.
+ */
+static ssize_t ibft_show_attribute(struct kobject *kobj,
+ struct attribute *attr,
+ char *buf)
+{
+ struct ibft_kobject *dev =
+ container_of(kobj, struct ibft_kobject, kobj);
+ struct ibft_attribute *ibft_attr =
+ container_of(attr, struct ibft_attribute, attr);
+ ssize_t ret = -EIO;
+ char *str = buf;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (ibft_attr->show)
+ ret = ibft_attr->show(dev, ibft_attr, str);
+
+ return ret;
+}
+
+static struct sysfs_ops ibft_attr_ops = {
+ .show = ibft_show_attribute,
+};
+
+static struct kobj_type ibft_ktype = {
+ .release = ibft_release,
+ .sysfs_ops = &ibft_attr_ops,
+};
+
+static struct kset *ibft_kset;
+
+static int __init ibft_check_and_alloc_device(void *idev)
+{
+ int len;
+ u8 *pos;
+ u8 csum = 0;
+ struct ibft_table_header *hdr;
+
+ if (!idev)
+ return -ENOENT;
+
+ hdr = (struct ibft_table_header *)phys_to_virt((unsigned long)
+ ibft_phys);
+ len = hdr->length;
+
+ /* Sanity checking of iBFT. */
+ if (hdr->revision != 1) {
+ printk(KERN_ERR "iBFT module supports only revision 1, " \
+ "while this is %d.\n", hdr->revision);
+ return 1;
+ }
+ for (pos = (u8 *)hdr; pos < (u8 *)hdr + len; pos++)
+ csum += *pos;
+
+ if (csum) {
+ printk(KERN_ERR "iBFT has incorrect checksum (0x%x)!\n", csum);
+ return 1;
+ }
+
+ ibft_device = kmalloc(len, GFP_KERNEL);
+ if (!ibft_device)
+ return -ENOMEM;
+
+ memcpy(ibft_device, hdr, len);
+
+ return 0;
+}
+
+static void ibft_free_device(struct ibft_table_header *hdr)
+{
+ kfree(hdr);
+}
+
+/*
+ * Helper function for ibft_register_kobjects.
+ */
+static int __init ibft_create_kobject(struct ibft_table_header *header,
+ struct ibft_hdr *hdr,
+ struct list_head *list)
+{
+ struct ibft_kobject *ibft_kobj = NULL;
+ struct ibft_nic *nic = (struct ibft_nic *)hdr;
+ struct pci_dev *pci_dev;
+ int rc = 0;
+
+ ibft_kobj = kzalloc(sizeof(*ibft_kobj), GFP_KERNEL);
+ if (!ibft_kobj)
+ return -ENOMEM;
+
+ ibft_kobj->header = header;
+ ibft_kobj->hdr = hdr;
+
+ switch (hdr->id) {
+ case id_initiator:
+ rc = ibft_verify_hdr("initiator", hdr, id_initiator,
+ sizeof(*ibft_kobj->initiator));
+ break;
+ case id_nic:
+ rc = ibft_verify_hdr("ethernet", hdr, id_nic,
+ sizeof(*ibft_kobj->nic));
+ break;
+ case id_target:
+ rc = ibft_verify_hdr("target", hdr, id_target,
+ sizeof(*ibft_kobj->tgt));
+ break;
+ case id_reserved:
+ case id_control:
+ case id_extensions:
+ /* Fields which we don't support. Ignore them */
+ rc = 1;
+ break;
+ default:
+ printk(KERN_ERR "iBFT has unknown structure type (%d). " \
+ "Report this bug to your vendor!\n", hdr->id);
+ rc = 1;
+ break;
+ }
+
+ if (rc) {
+ kfree(ibft_kobj);
+ goto out_invalid_struct;
+ }
+
+ /* kobject fief. We will let the reference counter do the job
+ of deleting its name if we fail here. */
+ ibft_kobj->kobj.kset = ibft_kset;
+
+ rc = kobject_init_and_add(&ibft_kobj->kobj, &ibft_ktype,
+ NULL, ibft_id_names[hdr->id], hdr->index);
+
+ if (rc) {
+ kfree(ibft_kobj);
+ goto out;
+ }
+
+ kobject_uevent(&ibft_kobj->kobj, KOBJ_ADD);
+
+ if (hdr->id == id_nic) {
+ pci_dev = pci_get_bus_and_slot((nic->pci_bdf & 0xff00) >> 8,
+ (nic->pci_bdf & 0xff));
+ if (pci_dev) {
+ rc = sysfs_create_link(&ibft_kobj->kobj,
+ &pci_dev->dev.kobj, "device");
+ pci_dev_put(pci_dev);
+ }
+ }
+
+ /* Nothing broke so lets add it to the list. */
+ list_add_tail(&ibft_kobj->node, list);
+out:
+ return rc;
+out_invalid_struct:
+ /* Unsupported structs are skipped. */
+ return 0;
+}
+
+/*
+ * Scan the IBFT table structure for the NIC and Target fields. When
+ * found add them on the passed-in list.
+ */
+static int __init ibft_register_kobjects(struct ibft_table_header *header,
+ struct list_head *list)
+{
+ struct ibft_control *control = NULL;
+ void *ptr, *end;
+ int rc = 0;
+ u16 offset;
+ u16 eot_offset;
+
+ control = (void *)header + sizeof(*header);
+ end = (void *)control + control->hdr.length;
+ eot_offset = (void *)header + header->length -
+ (void *)control - sizeof(*header);
+ rc = ibft_verify_hdr("control", (struct ibft_hdr *)control, id_control,
+ sizeof(*control));
+ rc |= control->hdr.index != 0;
+ if (rc)
+ return rc;
+
+ for (ptr = &control->initiator_off; ptr < end; ptr += sizeof(u16)) {
+ offset = *(u16 *)ptr;
+ if (offset && offset < header->length && offset < eot_offset) {
+ rc = ibft_create_kobject(header,
+ (void *)header + offset,
+ list);
+ if (rc)
+ break;
+ }
+ }
+
+ return rc;
+}
+
+static void ibft_unregister(struct list_head *attr_list,
+ struct list_head *kobj_list)
+{
+ struct ibft_kobject *data = NULL, *n;
+ struct ibft_attribute *attr = NULL, *m;
+
+ list_for_each_entry_safe(attr, m, attr_list, node) {
+ sysfs_remove_file(attr->kobj, &attr->attr);
+ list_del(&attr->node);
+ kfree(attr);
+ };
+ list_del_init(attr_list);
+
+ list_for_each_entry_safe(data, n, kobj_list, node) {
+ list_del(&data->node);
+ if (data->hdr->id == id_nic)
+ sysfs_remove_link(&data->kobj, "device");
+ kobject_put(&data->kobj);
+ };
+ list_del_init(kobj_list);
+}
+
+static int __init ibft_create_attribute(struct ibft_kobject *kobj_data,
+ int type,
+ const char *name,
+ ssize_t (*show)(struct ibft_kobject *,
+ struct ibft_attribute*,
+ char *buf),
+ struct list_head *list)
+{
+ struct ibft_attribute *attr = NULL;
+ struct ibft_hdr *hdr = kobj_data->hdr;
+
+ attr = kmalloc(sizeof(*attr), GFP_KERNEL);
+ if (!attr)
+ return -ENOMEM;
+
+ attr->attr.name = name;
+ attr->attr.mode = S_IRUSR;
+ attr->attr.owner = THIS_MODULE;
+
+ attr->hdr = hdr;
+ attr->show = show;
+ attr->kobj = &kobj_data->kobj;
+ attr->type = type;
+
+ list_add_tail(&attr->node, list);
+
+ return 0;
+}
+
+static int __init ibft_check_nic_for(struct ibft_nic *nic, int entry)
+{
+ int rc = 0;
+
+ switch (entry) {
+ case ibft_eth_index:
+ case ibft_eth_flags:
+ rc = 1;
+ break;
+ case ibft_eth_ip_addr:
+ if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+ rc = 1;
+ break;
+ case ibft_eth_subnet_mask:
+ if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+ rc = 1;
+ break;
+ case ibft_eth_origin:
+ rc = 1;
+ break;
+ case ibft_eth_gateway:
+ if (memcmp(nic->gateway, nulls, sizeof(nic->gateway)))
+ rc = 1;
+ break;
+ case ibft_eth_primary_dns:
+ if (memcmp(nic->primary_dns, nulls,
+ sizeof(nic->primary_dns)))
+ rc = 1;
+ break;
+ case ibft_eth_secondary_dns:
+ if (memcmp(nic->secondary_dns, nulls,
+ sizeof(nic->secondary_dns)))
+ rc = 1;
+ break;
+ case ibft_eth_dhcp:
+ if (memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+ rc = 1;
+ break;
+ case ibft_eth_vlan:
+ case ibft_eth_mac:
+ rc = 1;
+ break;
+ case ibft_eth_hostname:
+ if (nic->hostname_off)
+ rc = 1;
+ break;
+ default:
+ break;
+ }
+
+ return rc;
+}
+
+static int __init ibft_check_tgt_for(struct ibft_tgt *tgt, int entry)
+{
+ int rc = 0;
+
+ switch (entry) {
+ case ibft_tgt_index:
+ case ibft_tgt_flags:
+ case ibft_tgt_ip_addr:
+ case ibft_tgt_port:
+ case ibft_tgt_lun:
+ case ibft_tgt_nic_assoc:
+ case ibft_tgt_chap_type:
+ rc = 1;
+ case ibft_tgt_name:
+ if (tgt->tgt_name_len)
+ rc = 1;
+ break;
+ case ibft_tgt_chap_name:
+ case ibft_tgt_chap_secret:
+ if (tgt->chap_name_len)
+ rc = 1;
+ break;
+ case ibft_tgt_rev_chap_name:
+ case ibft_tgt_rev_chap_secret:
+ if (tgt->rev_chap_name_len)
+ rc = 1;
+ break;
+ default:
+ break;
+ }
+
+ return rc;
+}
+
+static int __init ibft_check_initiator_for(struct ibft_initiator *init,
+ int entry)
+{
+ int rc = 0;
+
+ switch (entry) {
+ case ibft_init_index:
+ case ibft_init_flags:
+ rc = 1;
+ break;
+ case ibft_init_isns_server:
+ if (memcmp(init->isns_server, nulls,
+ sizeof(init->isns_server)))
+ rc = 1;
+ break;
+ case ibft_init_slp_server:
+ if (memcmp(init->slp_server, nulls,
+ sizeof(init->slp_server)))
+ rc = 1;
+ break;
+ case ibft_init_pri_radius_server:
+ if (memcmp(init->pri_radius_server, nulls,
+ sizeof(init->pri_radius_server)))
+ rc = 1;
+ break;
+ case ibft_init_sec_radius_server:
+ if (memcmp(init->sec_radius_server, nulls,
+ sizeof(init->sec_radius_server)))
+ rc = 1;
+ break;
+ case ibft_init_initiator_name:
+ if (init->initiator_name_len)
+ rc = 1;
+ break;
+ default:
+ break;
+ }
+
+ return rc;
+}
+
+/*
+ * Register the attributes for all of the kobjects.
+ */
+static int __init ibft_register_attributes(struct list_head *kobject_list,
+ struct list_head *attr_list)
+{
+ int rc = 0, i = 0;
+ struct ibft_kobject *data = NULL;
+ struct ibft_attribute *attr = NULL, *m;
+
+ list_for_each_entry(data, kobject_list, node) {
+ switch (data->hdr->id) {
+ case id_nic:
+ for (i = 0; i < ibft_eth_end_marker && !rc; i++)
+ if (ibft_check_nic_for(data->nic, i))
+ rc = ibft_create_attribute(data, i,
+ ibft_eth_properties[i],
+ ibft_attr_show_nic, attr_list);
+ break;
+ case id_target:
+ for (i = 0; i < ibft_tgt_end_marker && !rc; i++)
+ if (ibft_check_tgt_for(data->tgt, i))
+ rc = ibft_create_attribute(data, i,
+ ibft_tgt_properties[i],
+ ibft_attr_show_target,
+ attr_list);
+ break;
+ case id_initiator:
+ for (i = 0; i < ibft_init_end_marker && !rc; i++)
+ if (ibft_check_initiator_for(
+ data->initiator, i))
+ rc = ibft_create_attribute(data, i,
+ ibft_initiator_properties[i],
+ ibft_attr_show_initiator,
+ attr_list);
+ break;
+ default:
+ break;
+ }
+ if (rc)
+ break;
+ }
+ list_for_each_entry_safe(attr, m, attr_list, node) {
+ rc = sysfs_create_file(attr->kobj, &attr->attr);
+ if (rc) {
+ list_del(&attr->node);
+ kfree(attr);
+ break;
+ }
+ }
+
+ return rc;
+}
+
+/*
+ * ibft_init() - creates sysfs tree entries for iBFT data.
+ */
+static int __init ibft_init(void)
+{
+ int rc = 0;
+
+ if (!ibft_phys)
+ find_ibft();
+
+ ibft_kset = kset_create_and_add("ibft", NULL, firmware_kobj);
+ if (!ibft_kset)
+ return -ENOMEM;
+
+ if (ibft_phys) {
+ printk(KERN_INFO "iBFT detected at 0x%p.\n", ibft_phys);
+
+ rc = ibft_check_and_alloc_device(ibft_phys);
+ if (rc)
+ goto out_firmware_unregister;
+
+ /* Scan the IBFT for data and register kobjects. */
+ rc = ibft_register_kobjects(ibft_device, &ibft_kobject_list);
+ if (rc)
+ goto out_free;
+
+ /* Register the attributes */
+ rc = ibft_register_attributes(&ibft_kobject_list,
+ &ibft_attr_list);
+ if (rc)
+ goto out_free;
+ } else
+ printk(KERN_INFO "No iBFT detected.\n");
+
+ return 0;
+
+out_free:
+ ibft_unregister(&ibft_attr_list, &ibft_kobject_list);
+ ibft_free_device(ibft_device);
+out_firmware_unregister:
+ kset_unregister(ibft_kset);
+ return rc;
+}
+
+static void __exit ibft_exit(void)
+{
+ ibft_unregister(&ibft_attr_list, &ibft_kobject_list);
+ ibft_free_device(ibft_device);
+ kset_unregister(ibft_kset);
+}
+
+module_init(ibft_init);
+module_exit(ibft_exit);
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
new file mode 100644
index 0000000..d40cc25
--- /dev/null
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2007 Red Hat, Inc.
+ * by Peter Jones <[email protected]>
+ * Copyright 2007 IBM, Inc.
+ * by Konrad Rzeszutek <[email protected]>
+ *
+ * This code finds the iSCSI Boot Format Table.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/blkdev.h>
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+
+/*
+ * Physical location of iSCSI Boot Format Table.
+ */
+void *ibft_phys;
+EXPORT_SYMBOL(ibft_phys);
+
+#define IBFT_SIGN "iBFT"
+#define IBFT_SIGN_LEN 4
+#define IBFT_START 0x80000 /* 512kB */
+#define IBFT_END 0x100000 /* 1MB */
+#define VGA_MEM 0xA0000 /* VGA buffer */
+#define VGA_SIZE 0x20000 /* 128kB */
+
+
+/*
+ * Routine used to find the iSCSI Boot Format Table. the physical
+ * location is set in the ibft_phys variable. The return value is
+ * the size of IBFT.
+ */
+ssize_t find_ibft(void)
+{
+ unsigned long pos;
+
+ for (pos = IBFT_START; pos < IBFT_END; pos += 16) {
+ void *virt;
+ /* The table can't be inside the VGA BIOS reserved space,
+ * so skip that area */
+ if (pos == VGA_MEM)
+ pos += VGA_SIZE;
+ virt = phys_to_virt(pos);
+ if (memcmp(virt, IBFT_SIGN, IBFT_SIGN_LEN) == 0) {
+ unsigned long *addr =
+ (unsigned long *)phys_to_virt(pos + 4);
+ unsigned int len = *addr;
+ /* if the length of the table extends past 1M,
+ * the table cannot be valid. */
+ if (pos + len <= (IBFT_END-1)) {
+ ibft_phys = (void *)pos;
+ return len;
+ }
+ }
+ }
+ return 0;
+}
+EXPORT_SYMBOL(find_ibft);
diff --git a/include/linux/iscsi_ibft.h b/include/linux/iscsi_ibft.h
new file mode 100644
index 0000000..4889e9d
--- /dev/null
+++ b/include/linux/iscsi_ibft.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2007 Red Hat, Inc.
+ * by Peter Jones <[email protected]>
+ * Copyright 2007 IBM, Inc.
+ * by Konrad Rzeszutek <[email protected]>
+ *
+ * This code exposes the iSCSI Boot Format Table to userland via sysfs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef ISCSI_IBFT_H
+#define ISCSI_IBFT_H
+
+#include <linux/bootmem.h>
+#include <asm/mmzone.h>
+
+/*
+ * Physical location of iSCSI Boot Format Table.
+ */
+extern void *ibft_phys;
+
+/*
+ * Routine used to find the iSCSI Boot Format Table. The physical
+ * location is set in the ibft_phys variable. The return value is the
+ * size of IBFT.
+ */
+extern ssize_t find_ibft(void);
+
+
+#ifdef CONFIG_ISCSI_IBFT_FIND
+static inline void __init reserve_ibft_region(void)
+{
+ unsigned int ibft_len;
+
+ ibft_len = find_ibft();
+ if (ibft_len)
+ reserve_bootmem((unsigned int)ibft_phys,
+ PAGE_ALIGN(ibft_len));
+}
+#else
+static inline void __init reserve_ibft_region(void) { }
+#endif
+
+#endif /* ISCSI_IBFT_H */


2008-02-02 00:18:31

by James Bottomley

[permalink] [raw]
Subject: Re: [PATCH] Add iSCSI iBFT support (v0.4.6)

On Wed, 2008-01-30 at 17:37 -0400, Konrad Rzeszutek wrote:
> This patch (v0.4.6) adds /sysfs/firmware/ibft/[initiator|targetX|ethernetX]
> directories along with text properties which export the the iSCSI
> Boot Firmware Table (iBFT) structure.
>
> What is iSCSI Boot Firmware Table? It is a mechanism for the iSCSI
> tools to extract from the machine NICs the iSCSI connection information
> so that they can automagically mount the iSCSI share/target. Currently
> the iSCSI information is hard-coded in the initrd. The /sysfs entries
> are read-only one-name-and-value fields.
>
> The usual set of data exposed is:
>
> # for a in `find /sys/firmware/ibft/ -type f -print`; do echo -n "$a: "; cat $a; done
> /sys/firmware/ibft/target0/target-name: iqn.2007.com.intel-sbx44:storage-10gb
> /sys/firmware/ibft/target0/nic-assoc: 0
> /sys/firmware/ibft/target0/chap-type: 0
> /sys/firmware/ibft/target0/lun: 00000000
> /sys/firmware/ibft/target0/port: 3260
> /sys/firmware/ibft/target0/ip-addr: 192.168.79.116
> /sys/firmware/ibft/target0/flags: 3
> /sys/firmware/ibft/target0/index: 0
> /sys/firmware/ibft/ethernet0/mac: 00:11:25:9d:8b:01
> /sys/firmware/ibft/ethernet0/vlan: 0
> /sys/firmware/ibft/ethernet0/gateway: 192.168.79.254
> /sys/firmware/ibft/ethernet0/origin: 0
> /sys/firmware/ibft/ethernet0/subnet-mask: 255.255.252.0
> /sys/firmware/ibft/ethernet0/ip-addr: 192.168.77.41
> /sys/firmware/ibft/ethernet0/flags: 7
> /sys/firmware/ibft/ethernet0/index: 0
> /sys/firmware/ibft/initiator/initiator-name: iqn.2007-07.com:konrad.initiator
> /sys/firmware/ibft/initiator/flags: 3
> /sys/firmware/ibft/initiator/index: 0
>
>
> For full details of the IBFT structure please take a look at:
> ftp://ftp.software.ibm.com/systems/support/system_x_pdf/ibm_iscsi_boot_firmware_table_v1.02.pdf

Some pieces of the patch are obviously wrong: find_ibft() shouldn't be
in ibft_init ... if ibft_phys was zero, it means the bootmem reservation
wasn't done and you shouldn't be poking about in memory which has likely
now been overwritten.

Also, why is ibft_phys the global variable you pass? You never actually
want to use the physical address, what you always end up using is the
kernel virtual address.

I'd simply use the ibft variable to point to the virtual address of the
ibft or null if not found, then you can throw out all the phys_to_virt()
calls.

Also, move the reserve_bootmem into the ibft_find routines and ensure
they're only called once on boot. Refuse to attach the ibft driver if
the virtual pointer ibft is null.

James

2008-02-02 00:48:10

by Andrew Morton

[permalink] [raw]
Subject: Re: [PATCH] Add iSCSI iBFT support (v0.4.6)

On Fri, 01 Feb 2008 18:18:09 -0600
James Bottomley <[email protected]> wrote:

> Also, move the reserve_bootmem into the ibft_find routines and ensure
> they're only called once on boot.

And note that the reserve_bootmem() interface is about to change.

http://userweb.kernel.org/~akpm/mmotm/broken-out/introduce-flags-for-reserve_bootmem.patch

2008-02-08 20:40:38

by Konrad Rzeszutek Wilk

[permalink] [raw]
Subject: Re: [PATCH] Add iSCSI iBFT support (v0.4.6)

On Friday 01 February 2008 19:18:09 James Bottomley wrote:
> On Wed, 2008-01-30 at 17:37 -0400, Konrad Rzeszutek wrote:
> > This patch (v0.4.6) adds

> Some pieces of the patch are obviously wrong: find_ibft() shouldn't be
> in ibft_init ... if ibft_phys was zero, it means the bootmem reservation
> wasn't done and you shouldn't be poking about in memory which has likely
> now been overwritten.
Fixed.
>
> Also, why is ibft_phys the global variable you pass? You never actually
> want to use the physical address, what you always end up using is the
> kernel virtual address.
>
> I'd simply use the ibft variable to point to the virtual address of the
> ibft or null if not found, then you can throw out all the phys_to_virt()
> calls.
Fixed.
>
> Also, move the reserve_bootmem into the ibft_find routines and ensure
> they're only called once on boot. Refuse to attach the ibft driver if
> the virtual pointer ibft is null.

James,

Thanks for your review. If you wouldn't mind, can you take a look
at the version 0.4.7 (http://lkml.org/lkml/2008/2/8/350) which has your
suggestions incorporated.

Thanks again.