From: Robert Hancock <[email protected]>
This path adds validation of the MMCONFIG table against the ACPI reserved
motherboard resources. If the MMCONFIG table is found to be reserved in
ACPI, we don't bother checking the E820 table. The PCI Express firmware
spec apparently tells BIOS developers that reservation in ACPI is required
and E820 reservation is optional, so checking against ACPI first makes
sense. Many BIOSes don't reserve the MMCONFIG region in E820 even though
it is perfectly functional, the existing check needlessly disables MMCONFIG
in these cases.
In order to do this, MMCONFIG setup has been split into two phases. If PCI
configuration type 1 is not available then MMCONFIG is enabled early as
before. Otherwise, it is enabled later after the ACPI interpreter is
enabled, since we need to be able to execute control methods in order to
check the ACPI reserved resources. Presently this is just triggered off
the end of ACPI interpreter initialization.
There are a few other behavioral changes here:
- Validate all MMCONFIG configurations provided, not just the first one.
- Validate the entire required length of each configuration according to
the provided ending bus number is reserved, not just the minimum required
allocation.
- Validate that the area is reserved even if we read it from the chipset
directly and not from the MCFG table. This catches the case where the
BIOS didn't set the location properly in the chipset and has mapped it
over other things it shouldn't have.
This also cleans up the MMCONFIG initialization functions so that they
simply do nothing if MMCONFIG is not compiled in.
Based on an original patch by Rajesh Shah from Intel.
[[email protected]: many fixes and cleanups]
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: Andi Kleen <[email protected]>
Tested-by: Andi Kleen <[email protected]>
Cc: Rajesh Shah <[email protected]>
Cc: Jesse Barnes <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Greg KH <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---
arch/x86/pci/init.c | 4
arch/x86/pci/mmconfig-shared.c | 151 +++++++++++++++++++++++++++----
arch/x86/pci/pci.h | 1
drivers/acpi/bus.c | 2
include/linux/pci.h | 8 +
5 files changed, 144 insertions(+), 22 deletions(-)
Index: linux-2.6/arch/x86/pci/init.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/init.c
+++ linux-2.6/arch/x86/pci/init.c
@@ -11,9 +11,7 @@ static __init int pci_access_init(void)
#ifdef CONFIG_PCI_DIRECT
type = pci_direct_probe();
#endif
-#ifdef CONFIG_PCI_MMCONFIG
- pci_mmcfg_init(type);
-#endif
+ pci_mmcfg_early_init(type);
if (raw_pci_ops)
return 0;
#ifdef CONFIG_PCI_BIOS
Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
+++ linux-2.6/arch/x86/pci/mmconfig-shared.c
@@ -173,9 +173,78 @@ static void __init pci_mmcfg_insert_reso
pci_mmcfg_resources_inserted = 1;
}
-static void __init pci_mmcfg_reject_broken(int type)
+static acpi_status __init check_mcfg_resource(struct acpi_resource *res,
+ void *data)
+{
+ struct resource *mcfg_res = data;
+ struct acpi_resource_address64 address;
+ acpi_status status;
+
+ if (res->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) {
+ struct acpi_resource_fixed_memory32 *fixmem32 =
+ &res->data.fixed_memory32;
+ if (!fixmem32)
+ return AE_OK;
+ if ((mcfg_res->start >= fixmem32->address) &&
+ (mcfg_res->end < (fixmem32->address +
+ fixmem32->address_length))) {
+ mcfg_res->flags = 1;
+ return AE_CTRL_TERMINATE;
+ }
+ }
+ if ((res->type != ACPI_RESOURCE_TYPE_ADDRESS32) &&
+ (res->type != ACPI_RESOURCE_TYPE_ADDRESS64))
+ return AE_OK;
+
+ status = acpi_resource_to_address64(res, &address);
+ if (ACPI_FAILURE(status) ||
+ (address.address_length <= 0) ||
+ (address.resource_type != ACPI_MEMORY_RANGE))
+ return AE_OK;
+
+ if ((mcfg_res->start >= address.minimum) &&
+ (mcfg_res->end < (address.minimum + address.address_length))) {
+ mcfg_res->flags = 1;
+ return AE_CTRL_TERMINATE;
+ }
+ return AE_OK;
+}
+
+static acpi_status __init find_mboard_resource(acpi_handle handle, u32 lvl,
+ void *context, void **rv)
+{
+ struct resource *mcfg_res = context;
+
+ acpi_walk_resources(handle, METHOD_NAME__CRS,
+ check_mcfg_resource, context);
+
+ if (mcfg_res->flags)
+ return AE_CTRL_TERMINATE;
+
+ return AE_OK;
+}
+
+static int __init is_acpi_reserved(unsigned long start, unsigned long end)
+{
+ struct resource mcfg_res;
+
+ mcfg_res.start = start;
+ mcfg_res.end = end;
+ mcfg_res.flags = 0;
+
+ acpi_get_devices("PNP0C01", find_mboard_resource, &mcfg_res, NULL);
+
+ if (!mcfg_res.flags)
+ acpi_get_devices("PNP0C02", find_mboard_resource, &mcfg_res,
+ NULL);
+
+ return mcfg_res.flags;
+}
+
+static void __init pci_mmcfg_reject_broken(void)
{
typeof(pci_mmcfg_config[0]) *cfg;
+ int i;
if ((pci_mmcfg_config_num == 0) ||
(pci_mmcfg_config == NULL) ||
@@ -196,17 +265,37 @@ static void __init pci_mmcfg_reject_brok
goto reject;
}
- /*
- * Only do this check when type 1 works. If it doesn't work
- * assume we run on a Mac and always use MCFG
- */
- if (type == 1 && !e820_all_mapped(cfg->address,
- cfg->address + MMCONFIG_APER_MIN,
- E820_RESERVED)) {
- printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
- " E820-reserved\n", cfg->address);
- goto reject;
+ for (i = 0; i < pci_mmcfg_config_num; i++) {
+ u32 size = (cfg->end_bus_number + 1) << 20;
+ cfg = &pci_mmcfg_config[i];
+ printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lu "
+ "segment %hu buses %u - %u\n",
+ i, (unsigned long)cfg->address, cfg->pci_segment,
+ (unsigned int)cfg->start_bus_number,
+ (unsigned int)cfg->end_bus_number);
+ if (is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
+ printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
+ "in ACPI motherboard resources\n",
+ cfg->address);
+ } else {
+ printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
+ " reserved in ACPI motherboard resources\n",
+ cfg->address);
+ /* Don't try to do this check unless configuration
+ type 1 is available. */
+ if ((pci_probe & PCI_PROBE_CONF1) &&
+ e820_all_mapped(cfg->address,
+ cfg->address + size - 1,
+ E820_RESERVED))
+ printk(KERN_NOTICE
+ "PCI: MCFG area at %Lx reserved in "
+ "E820\n",
+ cfg->address);
+ else
+ goto reject;
+ }
}
+
return;
reject:
@@ -216,20 +305,46 @@ reject:
pci_mmcfg_config_num = 0;
}
-void __init pci_mmcfg_init(int type)
+void __init pci_mmcfg_early_init(int type)
+{
+ if ((pci_probe & PCI_PROBE_MMCONF) == 0)
+ return;
+
+ /* If type 1 access is available, no need to enable MMCONFIG yet, we can
+ defer until later when the ACPI interpreter is available to better
+ validate things. */
+ if (type == 1)
+ return;
+
+ acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
+
+ if ((pci_mmcfg_config_num == 0) ||
+ (pci_mmcfg_config == NULL) ||
+ (pci_mmcfg_config[0].address == 0))
+ return;
+
+ if (pci_mmcfg_arch_init())
+ pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
+}
+
+void __init pci_mmcfg_late_init(void)
{
int known_bridge = 0;
+ /* MMCONFIG disabled */
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return;
- if (type == 1 && pci_mmcfg_check_hostbridge())
- known_bridge = 1;
+ /* MMCONFIG already enabled */
+ if (!(pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF))
+ return;
- if (!known_bridge) {
+ if ((pci_probe & PCI_PROBE_CONF1) && pci_mmcfg_check_hostbridge())
+ known_bridge = 1;
+ else
acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
- pci_mmcfg_reject_broken(type);
- }
+
+ pci_mmcfg_reject_broken();
if ((pci_mmcfg_config_num == 0) ||
(pci_mmcfg_config == NULL) ||
Index: linux-2.6/arch/x86/pci/pci.h
===================================================================
--- linux-2.6.orig/arch/x86/pci/pci.h
+++ linux-2.6/arch/x86/pci/pci.h
@@ -100,7 +100,6 @@ extern struct pci_raw_ops pci_direct_con
extern int pci_direct_probe(void);
extern void pci_direct_init(int type);
extern void pci_pcbios_init(void);
-extern void pci_mmcfg_init(int type);
extern void pcibios_sort(void);
/* pci-mmconfig.c */
Index: linux-2.6/drivers/acpi/bus.c
===================================================================
--- linux-2.6.orig/drivers/acpi/bus.c
+++ linux-2.6/drivers/acpi/bus.c
@@ -35,6 +35,7 @@
#ifdef CONFIG_X86
#include <asm/mpspec.h>
#endif
+#include <linux/pci.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
@@ -783,6 +784,7 @@ static int __init acpi_init(void)
result = acpi_bus_init();
if (!result) {
+ pci_mmcfg_late_init();
if (!(pm_flags & PM_APM))
pm_flags |= PM_ACPI;
else {
Index: linux-2.6/include/linux/pci.h
===================================================================
--- linux-2.6.orig/include/linux/pci.h
+++ linux-2.6/include/linux/pci.h
@@ -1050,5 +1050,13 @@ extern unsigned long pci_cardbus_mem_siz
extern int pcibios_add_platform_entries(struct pci_dev *dev);
+#ifdef CONFIG_PCI_MMCONFIG
+extern void __init pci_mmcfg_early_init(int type);
+extern void __init pci_mmcfg_late_init(void);
+#else
+static inline void pci_mmcfg_early_init(int type) { }
+static inline void pci_mmcfg_late_init(void) { }
+#endif
+
#endif /* __KERNEL__ */
#endif /* LINUX_PCI_H */
From: Yinghai Lu <[email protected]>
Patch
x86: validate against ACPI motherboard resources
changed the mmconf init sequence, and init MMCONF late in acpi_init.
here change it back to old sequence
1. check hostbridge in early
2. check MCFG with e820 in early
3. if all fail, will check MCFg with acpi _CRS in acpi_init
So we can make MCONF working again when acpi=off is set if hostbridge support
that.
Signed-off-by: Yinghai Lu <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Andi Kleen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---
arch/x86/pci/mmconfig-shared.c | 106 +++++++++++++++++--------------
1 file changed, 61 insertions(+), 45 deletions(-)
Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
+++ linux-2.6/arch/x86/pci/mmconfig-shared.c
@@ -241,7 +241,7 @@ static int __init is_acpi_reserved(unsig
return mcfg_res.flags;
}
-static void __init pci_mmcfg_reject_broken(void)
+static void __init pci_mmcfg_reject_broken(int type, int early)
{
typeof(pci_mmcfg_config[0]) *cfg;
int i;
@@ -266,34 +266,43 @@ static void __init pci_mmcfg_reject_brok
}
for (i = 0; i < pci_mmcfg_config_num; i++) {
+ int valid = 0;
u32 size = (cfg->end_bus_number + 1) << 20;
cfg = &pci_mmcfg_config[i];
- printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lu "
+ printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
"segment %hu buses %u - %u\n",
i, (unsigned long)cfg->address, cfg->pci_segment,
(unsigned int)cfg->start_bus_number,
(unsigned int)cfg->end_bus_number);
- if (is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
+
+ if (!early &&
+ is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
"in ACPI motherboard resources\n",
cfg->address);
- } else {
+ valid = 1;
+ }
+
+ if (valid)
+ continue;
+
+ if (!early)
printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
" reserved in ACPI motherboard resources\n",
cfg->address);
- /* Don't try to do this check unless configuration
- type 1 is available. */
- if ((pci_probe & PCI_PROBE_CONF1) &&
- e820_all_mapped(cfg->address,
- cfg->address + size - 1,
- E820_RESERVED))
- printk(KERN_NOTICE
- "PCI: MCFG area at %Lx reserved in "
- "E820\n",
- cfg->address);
- else
- goto reject;
+ /* Don't try to do this check unless configuration
+ type 1 is available. */
+ if (type == 1 && e820_all_mapped(cfg->address,
+ cfg->address + size - 1,
+ E820_RESERVED)) {
+ printk(KERN_NOTICE
+ "PCI: MCFG area at %Lx reserved in E820\n",
+ cfg->address);
+ valid = 1;
}
+
+ if (!valid)
+ goto reject;
}
return;
@@ -306,46 +315,36 @@ reject:
pci_mmcfg_config_num = 0;
}
-void __init pci_mmcfg_early_init(int type)
-{
- if ((pci_probe & PCI_PROBE_MMCONF) == 0)
- return;
-
- /* If type 1 access is available, no need to enable MMCONFIG yet, we can
- defer until later when the ACPI interpreter is available to better
- validate things. */
- if (type == 1)
- return;
-
- acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
-
- if ((pci_mmcfg_config_num == 0) ||
- (pci_mmcfg_config == NULL) ||
- (pci_mmcfg_config[0].address == 0))
- return;
+static int __initdata known_bridge;
- if (pci_mmcfg_arch_init())
- pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
-}
-
-void __init pci_mmcfg_late_init(void)
+void __init __pci_mmcfg_init(int type, int early)
{
- int known_bridge = 0;
-
/* MMCONFIG disabled */
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return;
/* MMCONFIG already enabled */
- if (!(pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF))
+ if (!early && !(pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF))
return;
- if ((pci_probe & PCI_PROBE_CONF1) && pci_mmcfg_check_hostbridge())
- known_bridge = 1;
- else
- acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
+ /* for late to exit */
+ if (known_bridge)
+ return;
- pci_mmcfg_reject_broken();
+ if (early && type == 1) {
+ if (pci_mmcfg_check_hostbridge())
+ known_bridge = 1;
+#if 0
+ /* check e820 in late? */
+ else
+ return;
+#endif
+ }
+
+ if (!known_bridge) {
+ acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
+ pci_mmcfg_reject_broken(type, early);
+ }
if ((pci_mmcfg_config_num == 0) ||
(pci_mmcfg_config == NULL) ||
@@ -365,6 +364,21 @@ void __init pci_mmcfg_late_init(void)
}
}
+void __init pci_mmcfg_early_init(int type)
+{
+ __pci_mmcfg_init(type, 1);
+}
+
+void __init pci_mmcfg_late_init(void)
+{
+ int type = 0;
+
+ if (pci_probe & PCI_PROBE_CONF1)
+ type = 1;
+
+ __pci_mmcfg_init(type, 0);
+}
+
static int __init pci_mmcfg_late_insert_resources(void)
{
/*
From: Yinghai Lu <[email protected]>
For x86_64, need to free pci_mmcfg_virt, and iounmap some pointers
when MMCONF is not reserved in E820 or acpi _CRS and get rejected
Signed-off-by: Yinghai Lu <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Andi Kleen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---
arch/x86/pci/mmconfig-shared.c | 1 +
arch/x86/pci/mmconfig_32.c | 4 ++++
arch/x86/pci/mmconfig_64.c | 22 +++++++++++++++++++++-
arch/x86/pci/pci.h | 1 +
4 files changed, 27 insertions(+), 1 deletion(-)
Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
+++ linux-2.6/arch/x86/pci/mmconfig-shared.c
@@ -300,6 +300,7 @@ static void __init pci_mmcfg_reject_brok
reject:
printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
+ pci_mmcfg_arch_free();
kfree(pci_mmcfg_config);
pci_mmcfg_config = NULL;
pci_mmcfg_config_num = 0;
Index: linux-2.6/arch/x86/pci/mmconfig_32.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/mmconfig_32.c
+++ linux-2.6/arch/x86/pci/mmconfig_32.c
@@ -136,3 +136,7 @@ int __init pci_mmcfg_arch_init(void)
raw_pci_ext_ops = &pci_mmcfg;
return 1;
}
+
+void __init pci_mmcfg_arch_free(void)
+{
+}
Index: linux-2.6/arch/x86/pci/mmconfig_64.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/mmconfig_64.c
+++ linux-2.6/arch/x86/pci/mmconfig_64.c
@@ -127,7 +127,7 @@ static void __iomem * __init mcfg_iorema
int __init pci_mmcfg_arch_init(void)
{
int i;
- pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) *
+ pci_mmcfg_virt = kzalloc(sizeof(*pci_mmcfg_virt) *
pci_mmcfg_config_num, GFP_KERNEL);
if (pci_mmcfg_virt == NULL) {
printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n");
@@ -141,9 +141,29 @@ int __init pci_mmcfg_arch_init(void)
printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
"segment %d\n",
pci_mmcfg_config[i].pci_segment);
+ pci_mmcfg_arch_free();
return 0;
}
}
raw_pci_ext_ops = &pci_mmcfg;
return 1;
}
+
+void __init pci_mmcfg_arch_free(void)
+{
+ int i;
+
+ if (pci_mmcfg_virt == NULL)
+ return;
+
+ for (i = 0; i < pci_mmcfg_config_num; ++i) {
+ if (pci_mmcfg_virt[i].virt) {
+ iounmap(pci_mmcfg_virt[i].virt);
+ pci_mmcfg_virt[i].virt = NULL;
+ pci_mmcfg_virt[i].cfg = NULL;
+ }
+ }
+
+ kfree(pci_mmcfg_virt);
+ pci_mmcfg_virt = NULL;
+}
Index: linux-2.6/arch/x86/pci/pci.h
===================================================================
--- linux-2.6.orig/arch/x86/pci/pci.h
+++ linux-2.6/arch/x86/pci/pci.h
@@ -105,6 +105,7 @@ extern void pcibios_sort(void);
/* pci-mmconfig.c */
extern int __init pci_mmcfg_arch_init(void);
+extern void __init pci_mmcfg_arch_free(void);
/*
* AMD Fam10h CPUs are buggy, and cannot access MMIO config space
From: Yinghai Lu <[email protected]>
so even booting kernel with acpi=off or even MCFG is not there, we still can
use MMCONFIG.
Signed-off-by: Yinghai Lu <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Greg KH <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---
arch/x86/pci/mmconfig-shared.c | 67 ++++++++++++++++++++++++++++---
1 file changed, 61 insertions(+), 6 deletions(-)
Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
+++ linux-2.6/arch/x86/pci/mmconfig-shared.c
@@ -100,33 +100,88 @@ static const char __init *pci_mmcfg_inte
return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub";
}
+static const char __init *pci_mmcfg_amd_fam10h(void)
+{
+ u32 low, high, address;
+ u64 base, msr;
+ int i;
+ unsigned segnbits = 0, busnbits;
+
+ address = MSR_FAM10H_MMIO_CONF_BASE;
+ if (rdmsr_safe(address, &low, &high))
+ return NULL;
+
+ msr = high;
+ msr <<= 32;
+ msr |= low;
+
+ /* mmconfig is not enable */
+ if (!(msr & FAM10H_MMIO_CONF_ENABLE))
+ return NULL;
+
+ base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT);
+
+ busnbits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
+ FAM10H_MMIO_CONF_BUSRANGE_MASK;
+ if (busnbits > 8) {
+ segnbits = busnbits - 8;
+ busnbits = 8;
+ }
+
+ pci_mmcfg_config_num = (1 << segnbits);
+ pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]) *
+ pci_mmcfg_config_num, GFP_KERNEL);
+ if (!pci_mmcfg_config)
+ return NULL;
+
+ for (i = 0; i < (1 << segnbits); i++) {
+ pci_mmcfg_config[i].address = base + (1<<28) * i;
+ pci_mmcfg_config[i].pci_segment = i;
+ pci_mmcfg_config[i].start_bus_number = 0;
+ pci_mmcfg_config[i].end_bus_number = (1 << busnbits) - 1;
+ }
+
+ return "AMD Family 10h NB";
+}
+
struct pci_mmcfg_hostbridge_probe {
+ u32 bus;
+ u32 devfn;
u32 vendor;
u32 device;
const char *(*probe)(void);
};
static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = {
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
+ { 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
+ { 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
+ { 0, PCI_DEVFN(0x18, 0), PCI_VENDOR_ID_AMD,
+ 0x1200, pci_mmcfg_amd_fam10h },
+ { 0xff, PCI_DEVFN(0, 0), PCI_VENDOR_ID_AMD,
+ 0x1200, pci_mmcfg_amd_fam10h },
};
static int __init pci_mmcfg_check_hostbridge(void)
{
u32 l;
+ u32 bus, devfn;
u16 vendor, device;
int i;
const char *name;
- pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0, 4, &l);
- vendor = l & 0xffff;
- device = (l >> 16) & 0xffff;
-
pci_mmcfg_config_num = 0;
pci_mmcfg_config = NULL;
name = NULL;
for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
+ bus = pci_mmcfg_probes[i].bus;
+ devfn = pci_mmcfg_probes[i].devfn;
+ pci_direct_conf1.read(0, bus, devfn, 0, 4, &l);
+ vendor = l & 0xffff;
+ device = (l >> 16) & 0xffff;
+
if (pci_mmcfg_probes[i].vendor == vendor &&
pci_mmcfg_probes[i].device == device)
name = pci_mmcfg_probes[i].probe();
On Mon, 11 Feb 2008 16:48:35 -0800
Yinghai Lu <[email protected]> wrote:
> From: Yinghai Lu <[email protected]>
>
> so even booting kernel with acpi=off or even MCFG is not there, we still can
> use MMCONFIG.
>
This patch threw a big reject. I didn't check why.
> + pci_direct_conf1.read(0, bus, devfn, 0, 4, &l);
When I fixed the reject, compilation failed here.
arch/x86/pci/mmconfig-shared.c: In function 'pci_mmcfg_check_hostbridge':
arch/x86/pci/mmconfig-shared.c:214: error: 'pci_direct_conf1' undeclared (first use in this function)
What kernel are you patching?
On Monday 11 February 2008 05:09:44 pm Andrew Morton wrote:
> On Mon, 11 Feb 2008 16:48:35 -0800
> Yinghai Lu <[email protected]> wrote:
>
> > From: Yinghai Lu <[email protected]>
> >
> > so even booting kernel with acpi=off or even MCFG is not there, we still can
> > use MMCONFIG.
> >
>
> This patch threw a big reject. I didn't check why.
>
>
> > + pci_direct_conf1.read(0, bus, devfn, 0, 4, &l);
>
> When I fixed the reject, compilation failed here.
>
> arch/x86/pci/mmconfig-shared.c: In function 'pci_mmcfg_check_hostbridge':
> arch/x86/pci/mmconfig-shared.c:214: error: 'pci_direct_conf1' undeclared (first use in this function)
>
>
> What kernel are you patching?
>
linus tree.
other three are ok?
YH
On Mon, 11 Feb 2008 18:20:46 -0800 Yinghai Lu <[email protected]> wrote:
> On Monday 11 February 2008 05:09:44 pm Andrew Morton wrote:
> > On Mon, 11 Feb 2008 16:48:35 -0800
> > Yinghai Lu <[email protected]> wrote:
> >
> > > From: Yinghai Lu <[email protected]>
> > >
> > > so even booting kernel with acpi=off or even MCFG is not there, we still can
> > > use MMCONFIG.
> > >
> >
> > This patch threw a big reject. I didn't check why.
> >
> >
> > > + pci_direct_conf1.read(0, bus, devfn, 0, 4, &l);
> >
> > When I fixed the reject, compilation failed here.
> >
> > arch/x86/pci/mmconfig-shared.c: In function 'pci_mmcfg_check_hostbridge':
> > arch/x86/pci/mmconfig-shared.c:214: error: 'pci_direct_conf1' undeclared (first use in this function)
> >
> >
> > What kernel are you patching?
> >
>
> linus tree.
hm. So why didn't it compile? pci_direct_conf1 is defined over in
arch/x86/pci/direct.c and is not mentioned in any header file.
> other three are ok?
Well, they applied, but I didn't review, build-test or merge them.
On Monday 11 February 2008 06:51:15 pm Andrew Morton wrote:
> On Mon, 11 Feb 2008 18:20:46 -0800 Yinghai Lu <[email protected]> wrote:
>
> > On Monday 11 February 2008 05:09:44 pm Andrew Morton wrote:
> > > On Mon, 11 Feb 2008 16:48:35 -0800
> > > Yinghai Lu <[email protected]> wrote:
> > >
> > > > From: Yinghai Lu <[email protected]>
> > > >
> > > > so even booting kernel with acpi=off or even MCFG is not there, we still can
> > > > use MMCONFIG.
> > > >
> > >
> > > This patch threw a big reject. I didn't check why.
> > >
> > >
> > > > + pci_direct_conf1.read(0, bus, devfn, 0, 4, &l);
> > >
> > > When I fixed the reject, compilation failed here.
> > >
> > > arch/x86/pci/mmconfig-shared.c: In function 'pci_mmcfg_check_hostbridge':
> > > arch/x86/pci/mmconfig-shared.c:214: error: 'pci_direct_conf1' undeclared (first use in this function)
> > >
> > >
> > > What kernel are you patching?
> > >
> >
> > linus tree.
>
> hm. So why didn't it compile? pci_direct_conf1 is defined over in
> arch/x86/pci/direct.c and is not mentioned in any header file.
it is in arch/x86/pci/pci.h
and arch/x86/pci/mmconf_shared.c has one
#include "pci.h"
did you compile that for 32 bit?
YH
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=b6ce068a1285a24185b01be8a49021827516b3e1
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index 36cb44c..3431518 100644 (file)
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -85,10 +85,17 @@ extern spinlock_t pci_config_lock;
extern int (*pcibios_enable_irq)(struct pci_dev *dev);
extern void (*pcibios_disable_irq)(struct pci_dev *dev);
-extern int pci_conf1_write(unsigned int seg, unsigned int bus,
- unsigned int devfn, int reg, int len, u32 value);
-extern int pci_conf1_read(unsigned int seg, unsigned int bus,
- unsigned int devfn, int reg, int len, u32 *value);
+struct pci_raw_ops {
+ int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
+ int reg, int len, u32 *val);
+ int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
+ int reg, int len, u32 val);
+};
+
+extern struct pci_raw_ops *raw_pci_ops;
+extern struct pci_raw_ops *raw_pci_ext_ops;
+
+extern struct pci_raw_ops pci_direct_conf1;
extern int pci_direct_probe(void);
extern void pci_direct_init(int type);