File is now error free.
Compile tested.
Signed-off-by: Paolo Ciarrocchi <[email protected]>
---
arch/x86/kernel/cpu/amd.c | 94 +++++++++++++++++++++++----------------------
1 files changed, 48 insertions(+), 46 deletions(-)
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index cab4e56..1a3e1bb 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -20,7 +20,7 @@
* the chip setting when fixing the bug but they also tweaked some
* performance at the same time..
*/
-
+
extern void vide(void);
__asm__(".align 4\nvide: ret");
@@ -81,7 +81,8 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
#ifdef CONFIG_SMP
unsigned long long value;
- /* Disable TLB flush filter by setting HWCR.FFDIS on K8
+ /*
+ * Disable TLB flush filter by setting HWCR.FFDIS on K8
* bit 6 of msr C001_0015
*
* Errata 63 for SH-B3 steppings
@@ -102,15 +103,16 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
* no bus pipeline)
*/
- /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
- 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+ /*
+ * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+ * DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
+ */
clear_bit(0*32+31, c->x86_capability);
-
+
r = get_model_name(c);
- switch(c->x86)
- {
- case 4:
+ switch (c->x86) {
+ case 4:
/*
* General Systems BIOSen alias the cpu frequency registers
* of the Elan at 0x000df000. Unfortuantly, one of the Linux
@@ -120,61 +122,60 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
#define CBAR_ENB (0x80000000)
#define CBAR_KEY (0X000000CB)
- if (c->x86_model==9 || c->x86_model == 10) {
+ if (c->x86_model == 9 || c->x86_model == 10) {
if (inl (CBAR) & CBAR_ENB)
outl (0 | CBAR_KEY, CBAR);
}
break;
- case 5:
- if( c->x86_model < 6 )
- {
+ case 5:
+ if (c->x86_model < 6) {
/* Based on AMD doc 20734R - June 2000 */
- if ( c->x86_model == 0 ) {
+ if (c->x86_model == 0) {
clear_bit(X86_FEATURE_APIC, c->x86_capability);
set_bit(X86_FEATURE_PGE, c->x86_capability);
}
break;
}
-
- if ( c->x86_model == 6 && c->x86_mask == 1 ) {
+
+ if (c->x86_model == 6 && c->x86_mask == 1) {
const int K6_BUG_LOOP = 1000000;
int n;
void (*f_vide)(void);
unsigned long d, d2;
-
+
printk(KERN_INFO "AMD K6 stepping B detected - ");
-
+
/*
- * It looks like AMD fixed the 2.6.2 bug and improved indirect
+ * It looks like AMD fixed the 2.6.2 bug and improved indirect
* calls at the same time.
*/
n = K6_BUG_LOOP;
f_vide = vide;
rdtscl(d);
- while (n--)
+ while (n--)
f_vide();
rdtscl(d2);
d = d2-d;
- if (d > 20*K6_BUG_LOOP)
+ if (d > 20*K6_BUG_LOOP)
printk("system stability may be impaired when more than 32 MB are used.\n");
- else
+ else
printk("probably OK (after B9730xxxx).\n");
printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
}
/* K6 with old style WHCR */
if (c->x86_model < 8 ||
- (c->x86_model== 8 && c->x86_mask < 8)) {
+ (c->x86_model == 8 && c->x86_mask < 8)) {
/* We can only write allocate on the low 508Mb */
- if(mbytes>508)
- mbytes=508;
+ if (mbytes > 508)
+ mbytes = 508;
rdmsr(MSR_K6_WHCR, l, h);
- if ((l&0x0000FFFF)==0) {
+ if ((l&0x0000FFFF) == 0) {
unsigned long flags;
- l=(1<<0)|((mbytes/4)<<1);
+ l = (1<<0)|((mbytes/4)<<1);
local_irq_save(flags);
wbinvd();
wrmsr(MSR_K6_WHCR, l, h);
@@ -185,17 +186,17 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
break;
}
- if ((c->x86_model == 8 && c->x86_mask >7) ||
+ if ((c->x86_model == 8 && c->x86_mask > 7) ||
c->x86_model == 9 || c->x86_model == 13) {
/* The more serious chips .. */
- if(mbytes>4092)
- mbytes=4092;
+ if (mbytes > 4092)
+ mbytes = 4092;
rdmsr(MSR_K6_WHCR, l, h);
- if ((l&0xFFFF0000)==0) {
+ if ((l&0xFFFF0000) == 0) {
unsigned long flags;
- l=((mbytes>>2)<<22)|(1<<16);
+ l = ((mbytes>>2)<<22)|(1<<16);
local_irq_save(flags);
wbinvd();
wrmsr(MSR_K6_WHCR, l, h);
@@ -217,10 +218,11 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
break;
}
break;
- case 6: /* An Athlon/Duron */
-
- /* Bit 15 of Athlon specific MSR 15, needs to be 0
- * to enable SSE on Palomino/Morgan/Barton CPU's.
+ case 6: /* An Athlon/Duron */
+
+ /*
+ * Bit 15 of Athlon specific MSR 15, needs to be 0
+ * to enable SSE on Palomino/Morgan/Barton CPU's.
* If the BIOS didn't enable it already, enable it here.
*/
if (c->x86_model >= 6 && c->x86_model <= 10) {
@@ -233,11 +235,12 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
}
}
- /* It's been determined by AMD that Athlons since model 8 stepping 1
+ /*
+ * It's been determined by AMD that Athlons since model 8 stepping 1
* are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
* As per AMD technical note 27212 0.2
*/
- if ((c->x86_model == 8 && c->x86_mask>=1) || (c->x86_model > 8)) {
+ if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
rdmsr(MSR_K7_CLK_CTL, l, h);
if ((l & 0xfff00000) != 0x20000000) {
printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
@@ -256,7 +259,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
set_bit(X86_FEATURE_K8, c->x86_capability);
break;
case 6:
- set_bit(X86_FEATURE_K7, c->x86_capability);
+ set_bit(X86_FEATURE_K7, c->x86_capability);
break;
}
if (c->x86 >= 6)
@@ -264,9 +267,8 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
display_cacheinfo(c);
- if (cpuid_eax(0x80000000) >= 0x80000008) {
+ if (cpuid_eax(0x80000000) >= 0x80000008)
c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
- }
#ifdef CONFIG_X86_HT
/*
@@ -308,14 +310,14 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
set_bit(X86_FEATURE_MFENCE_RDTSC, c->x86_capability);
}
-static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
{
/* AMD errata T13 (order #21922) */
if ((c->x86 == 6)) {
if (c->x86_model == 3 && c->x86_mask == 0) /* Duron Rev A0 */
size = 64;
if (c->x86_model == 4 &&
- (c->x86_mask==0 || c->x86_mask==1)) /* Tbird rev A1/A2 */
+ (c->x86_mask == 0 || c->x86_mask == 1)) /* Tbird rev A1/A2 */
size = 256;
}
return size;
@@ -323,16 +325,16 @@ static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned in
static struct cpu_dev amd_cpu_dev __cpuinitdata = {
.c_vendor = "AMD",
- .c_ident = { "AuthenticAMD" },
+ .c_ident = { "AuthenticAMD" },
.c_models = {
{ .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
{
[3] = "486 DX/2",
[7] = "486 DX/2-WB",
- [8] = "486 DX/4",
- [9] = "486 DX/4-WB",
+ [8] = "486 DX/4",
+ [9] = "486 DX/4-WB",
[14] = "Am5x86-WT",
- [15] = "Am5x86-WB"
+ [15] = "Am5x86-WB"
}
},
},
--
1.5.4.GIT