Hi All,
I report new results of dm-ioband bandwidth control test. The previous
test results were posted on Jan 25.
I've got really good results as well as the last report. dm-ioband
works well with Xen virtual disk.
I also announce that dm-ioband website has launched. The patches,
the manual, the benchmark results and other related information are
available through this site. Please check it out:
http://people.valinux.co.jp/~ryov/dm-ioband/
Bandwidth control on a per partition basis
==========================================
Test procedure
--------------
o Prepare three partitions sda11, sda12 and sda13.
o Create three ioband devices ioband1, ioband2 and ioband3 on each
partition respectively.
o Give weights of 40, 20 and 10 to each ioband device respectively.
o Run 50, 100 and 200 processes issuing random read/write direct I/O
with 4KB data on each ioband device at the same time respectively.
o Count up the number of I/Os which have done in 60 seconds.
o For comparison, do this test under different conditions. The
conditions are:
- Direct access to the physical devices without dm-ioband.
- Give weights in equal proportion to each ioband devices.
Read/Write process Read/Write process Read/Write process
x 50 x 100 x 200
| | |
+--------V---------+ +--------V---------+ +--------V---------+
| ioband1 | | ioband2 | | ioband3 | ioband devices
+------------------+ +------------------+ +------------------+
| default group | | default group | | default group | ioband groups
| (40) | | (20) | | (10) | (weight)
+--------|---------+ +--------|---------+ +--------|---------+
+--------V---------+ +--------V---------+ +--------V---------+
| /dev/sda11 | | /dev/sda12 | | /dev/sda13 | physical devs.
+------------------+ +------------------+ +------------------+
Results
-------
Direct access without dm-ioband
-----------------------------------------------------------------------
| device | sda11 | sda12 | sda13 |
| I/O processes | 50 (14.3%) | 100 (28.6%) | 200 (57.1%) |
|-----------------+-----------------+-----------------+-----------------|
| I/Os | 1469 | 2486 | 5032 |
| ratio to total | 16.3% | 27.7% | 56.0% |
-----------------------------------------------------------------------
Weights in inverse proportion to the number of processes
-----------------------------------------------------------------------
| device | sda11 | sda12 | sda13 |
| weight | 40 (57.1%) | 20 (28.6%) | 10 (14.3%) |
|-----------------+-----------------+-----------------+-----------------|
| I/Os | 5023 | 2654 | 1369 |
| ratio to total | 55.5% | 29.3% | 15.1% |
-----------------------------------------------------------------------
Weights in equal proportion
-----------------------------------------------------------------------
| device | sda11 | sda12 | sda13 |
| weight | 10 (33.3%) | 10 (33.3%) | 10 (33.3%) |
|-----------------+-----------------+-----------------+-----------------|
| I/Os | 2954 | 3004 | 2986 |
| ratio to total | 33.0% | 33.6% | 33.4% |
-----------------------------------------------------------------------
Bandwidth control on a per logical volume basis
===============================================
Test procedure
--------------
o Prepare two partitions sda11 and sdb11.
o Create a volume group with the two partitions.
o Create two striped logical volumes on the volume group.
o Give weights of 20 and 10 to lv0 and lv1 respectively.
o Run 128 processes issuing random read/write direct I/O with 4KB data
on each ioband device at the same time respectively.
o Count up the number of I/Os which have done in 60 seconds.
Block diagram
-------------
Read/Write process x 128 Read/Write process x 128
| |
+-------------V------------+ +-------------V------------+
| /dev/mapper/ioband1 | | /dev/mapper/ioband2 | ioband devices
+--------------------------+ +--------------------------+
| default group | | default group | ioband groups
| (20) | | (10) | (weight)
+-------------|------------+ +-------------|------------+
+-------------V------------+ +-------------V------------+
| /dev/mapper/lv0 | | /dev/mapper/lv1 | striped logical
| | | | volumes
+---------------------------------------------------------+
| vg0 | volume group
+-------------|------------------------------|------------+
+-------------V------------+ +-------------V------------+
| /dev/sda11 | | /dev/sdb11 | physical devices
+--------------------------+ +--------------------------+
Result
------
-----------------------------------------------------
| device | lv0 | lv1 |
| weight | 20 (66.6%) | 10 (33.3%) |
|-----------------+-----------------+-----------------|
| I/Os | 13508 | 6779 |
| ratio to total | 66.6% | 33.3% |
-----------------------------------------------------
Bandwidth control on a per Xen virtual block device basis
=========================================================
Test procedure
--------------
o Prepare two partitions sda11 and sda12.
o Create two ioband devices ioband1 and ioband2 on each partition
respectively.
o Give weight of 20 and 10 to each ioband device respectively.
o Create two virtual machines that using the ioband device as Xen
virtual machine's disk.
o Run 128 processes issuing random read/write direct I/O with 4KB
data on each virtual machine at the same time respectively.
o Count up the number of I/Os which have done in 60 seconds.
+--------------------------+ +--------------------------+
| Virtual Machine 1 | | Virtual Machine 2 | virtual machines
| | | |
| Read/Write process x 128 | | Read/Write process x 128 |
| | | | | |
| +----------V---------+ | | +----------V---------+ +
| | /dev/xvda1 | | | | /dev/xvda1 | | virtual block
| +----------|---------+ | | +----------|---------+ | devices
+-------------|------------+ +-------------|------------+
+-------------V------------+ +-------------V------------+
| /dev/mapper/ioband1 | | /dev/mapper/ioband2 | ioband devices
+--------------------------+ +--------------------------+
| default group | | default group | ioband groups
| (20) | | (10) | (weight)
+-------------|------------+ +-------------|------------+
+-------------V------------+ +-------------V------------+
| /dev/sda11 | | /dev/sda12 | physical device
+--------------------------+ +--------------------------+
Result
------
-----------------------------------------------------
| virtual machine | VM1 | VM2 |
| weight | 20 (66.6%) | 10 (33.3%) |
|-----------------+-----------------+-----------------|
| I/Os | 7140 | 3819 |
| ratio to total | 65.2% | 34.8% |
-----------------------------------------------------
Bandwidth control on a per Xen virtual block device basis
=========================================================
Test procedure
--------------
o Prepare one partition sda11.
o Create two files on sda11 to use as virtual machine's disks.
o Create an ioband devices on sda11.
o Create two virtual machines that using the prepared files as Xen
virtual machine's disk.
o Create two extra ioband-groups on ioband1, the first is of process
tapdisk1 and the second is of process tapdisk2.
o Run 128 processes issuing random read/write direct I/O with 4KB
data on each virtual machine at the same time respectively.
o Count up the number of I/Os which have done in 60 seconds.
+--------------------------+ +--------------------------+
| Virtual Machine 1 | | Virtual Machine 2 | virtual machines
| | | |
| Read/Write process x 128 | | Read/Write process x 128 |
| | | | | |
| +----------V---------+ | | +----------V---------+ +
| | /dev/xvda1 | | | | /dev/xvda1 | | virtual block
| +----------|---------+ | | +----------|---------+ | devices
+-------------|------------+ +-------------|------------+
+-------------V------------+ +-------------V------------+
| tapdisk1 | | tapdisk2 | tapdisk
+-------------|------------+ +-------------|------------+ processes
+-------------V------------------------------V------------+
| pid of tapdisk1 | pid of tapdisk2 | ioband groups
| (20) | (10) | (weight)
| /dev/mapper/ioband1 | ioband device
+-------------|------------------------------|------------+
| +----------V----------+ +----------V---------+ |
| | vm1.img | | vm2.img | | disk image files
| +---------------------+ +--------------------+ |
| /dev/sda11 | physical device
+---------------------------------------------------------+
Result
------
-----------------------------------------------------
| virtual machine | VM1 | VM2 |
| weight | 20 (66.6%) | 10 (33.3%) |
|-----------------+-----------------+-----------------|
| I/Os | 7486 | 3895 |
| ratio to total | 65.8% | 34.2% |
-----------------------------------------------------
Thanks,
Ryo Tsuruta