>From bee7242cf04c4a060b311b11985efb495f308355 Mon Sep 17 00:00:00 2001
From: Andres Salomon <[email protected]>
Date: Mon, 25 Feb 2008 15:29:36 -0500
Subject: [PATCH] gxfb: move MSR bit fields into gxfb.h
This continues the gxfb header cleanups. MSRs are defined in geode.h;
the specific bits we care about are defined in gxfb.h.
Signed-off-by: Andres Salomon <[email protected]>
---
drivers/video/geode/display_gx.h | 3 ---
drivers/video/geode/gxfb.h | 16 ++++++++++++++++
drivers/video/geode/gxfb_core.c | 2 +-
drivers/video/geode/video_gx.c | 4 ++--
drivers/video/geode/video_gx.h | 14 --------------
5 files changed, 19 insertions(+), 20 deletions(-)
diff --git a/drivers/video/geode/display_gx.h b/drivers/video/geode/display_gx.h
index 56e9d2e..ad556d3 100644
--- a/drivers/video/geode/display_gx.h
+++ b/drivers/video/geode/display_gx.h
@@ -16,7 +16,4 @@ int gx_line_delta(int xres, int bpp);
extern struct geode_dc_ops gx_dc_ops;
-/* MSR that tells us if a TFT or CRT is attached */
-#define GLD_MSR_CONFIG_DM_FP 0x40
-
#endif /* !__DISPLAY_GX1_H__ */
diff --git a/drivers/video/geode/gxfb.h b/drivers/video/geode/gxfb.h
index 3367fdc..19cf8ca 100644
--- a/drivers/video/geode/gxfb.h
+++ b/drivers/video/geode/gxfb.h
@@ -231,4 +231,20 @@ enum fp_registers {
#define write_fp(reg, val) writel((uint32_t) (val), \
par->vid_regs + 8*(reg) + VP_FP_START)
+
+/* MSRs are defined in asm/geode.h; their bitfields are here */
+
+#define MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3 (1 << 3)
+#define MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 (1 << 2)
+#define MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 (1 << 1)
+
+#define MSR_GLCP_DOTPLL_LOCK (1 << 25) /* r/o */
+#define MSR_GLCP_DOTPLL_BYPASS (1 << 15)
+#define MSR_GLCP_DOTPLL_DOTRESET (1 << 0)
+
+#define MSR_GX_MSR_PADSEL_MASK 0x3FFFFFFF /* undocumented? */
+#define MSR_GX_MSR_PADSEL_TFT 0x1FFFFFFF /* undocumented? */
+
+#define MSR_GX_GLD_MSR_CONFIG_FP (1 << 3)
+
#endif
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index 2e49a5e..ee25774 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -328,7 +328,7 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i
rdmsrl(MSR_GX_GLD_MSR_CONFIG, val);
- if ((val & GLD_MSR_CONFIG_DM_FP) == GLD_MSR_CONFIG_DM_FP)
+ if ((val & MSR_GX_GLD_MSR_CONFIG_FP) == MSR_GX_GLD_MSR_CONFIG_FP)
par->enable_crt = 0;
else
par->enable_crt = 1;
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index 51b03b7..bb77ccc 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/geode/video_gx.c
@@ -187,8 +187,8 @@ gx_configure_tft(struct fb_info *info)
/* Set up the DF pad select MSR */
rdmsrl(MSR_GX_MSR_PADSEL, val);
- val &= ~GX_VP_PAD_SELECT_MASK;
- val |= GX_VP_PAD_SELECT_TFT;
+ val &= ~MSR_GX_MSR_PADSEL_MASK;
+ val |= MSR_GX_MSR_PADSEL_TFT;
wrmsrl(MSR_GX_MSR_PADSEL, val);
/* Turn off the panel */
diff --git a/drivers/video/geode/video_gx.h b/drivers/video/geode/video_gx.h
index 5457bd0..79f6e81 100644
--- a/drivers/video/geode/video_gx.h
+++ b/drivers/video/geode/video_gx.h
@@ -13,18 +13,4 @@
extern struct geode_vid_ops gx_vid_ops;
-/* GX Flatpanel control MSR */
-#define GX_VP_PAD_SELECT_MASK 0x3FFFFFFF
-#define GX_VP_PAD_SELECT_TFT 0x1FFFFFFF
-
-/* Geode GX clock control MSRs */
-
-# define MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 (0x0000000000000002ull)
-# define MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 (0x0000000000000004ull)
-# define MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3 (0x0000000000000008ull)
-
-# define MSR_GLCP_DOTPLL_DOTRESET (0x0000000000000001ull)
-# define MSR_GLCP_DOTPLL_BYPASS (0x0000000000008000ull)
-# define MSR_GLCP_DOTPLL_LOCK (0x0000000002000000ull)
-
#endif /* !__VIDEO_GX_H__ */
--
1.5.3.7
On Sat, 8 Mar 2008 20:48:40 -0500
Andres Salomon <[email protected]> wrote:
> >From bee7242cf04c4a060b311b11985efb495f308355 Mon Sep 17 00:00:00 2001
> From: Andres Salomon <[email protected]>
> Date: Mon, 25 Feb 2008 15:29:36 -0500
> Subject: [PATCH] gxfb: move MSR bit fields into gxfb.h
>
> This continues the gxfb header cleanups. MSRs are defined in geode.h;
> the specific bits we care about are defined in gxfb.h.
>
> Signed-off-by: Andres Salomon <[email protected]>
> ---
> drivers/video/geode/display_gx.h | 3 ---
> drivers/video/geode/gxfb.h | 16 ++++++++++++++++
> drivers/video/geode/gxfb_core.c | 2 +-
> drivers/video/geode/video_gx.c | 4 ++--
> drivers/video/geode/video_gx.h | 14 --------------
> 5 files changed, 19 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/video/geode/display_gx.h b/drivers/video/geode/display_gx.h
> index 56e9d2e..ad556d3 100644
> --- a/drivers/video/geode/display_gx.h
> +++ b/drivers/video/geode/display_gx.h
> @@ -16,7 +16,4 @@ int gx_line_delta(int xres, int bpp);
>
> extern struct geode_dc_ops gx_dc_ops;
>
> -/* MSR that tells us if a TFT or CRT is attached */
> -#define GLD_MSR_CONFIG_DM_FP 0x40
> -
> #endif /* !__DISPLAY_GX1_H__ */
Something has gone wrong here. The code in current mainline is
extern struct geode_dc_ops gx_dc_ops;
/* MSR that tells us if a TFT or CRT is attached */
#define GLD_MSR_CONFIG 0xC0002001
#define GLD_MSR_CONFIG_DM_FP 0x40
/* Display controller registers */
whereas you're patching something else.
In [1/6] you refer to "the MSR cleanup patch". I don't know what that is.
Please clean up the changelogs - remove those email headers from the
email-forwarding operation and remove the additional little commentary on
top: if there's actually anything in there which is needed then it should
be integrated into the changelog proper, thanks.
On Mon, 10 Mar 2008 13:14:32 -0700
Andrew Morton <[email protected]> wrote:
> On Sat, 8 Mar 2008 20:48:40 -0500
> Andres Salomon <[email protected]> wrote:
>
> > >From bee7242cf04c4a060b311b11985efb495f308355 Mon Sep 17 00:00:00 2001
> > From: Andres Salomon <[email protected]>
> > Date: Mon, 25 Feb 2008 15:29:36 -0500
> > Subject: [PATCH] gxfb: move MSR bit fields into gxfb.h
> >
> > This continues the gxfb header cleanups. MSRs are defined in geode.h;
> > the specific bits we care about are defined in gxfb.h.
> >
> > Signed-off-by: Andres Salomon <[email protected]>
> > ---
> > drivers/video/geode/display_gx.h | 3 ---
> > drivers/video/geode/gxfb.h | 16 ++++++++++++++++
> > drivers/video/geode/gxfb_core.c | 2 +-
> > drivers/video/geode/video_gx.c | 4 ++--
> > drivers/video/geode/video_gx.h | 14 --------------
> > 5 files changed, 19 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/video/geode/display_gx.h b/drivers/video/geode/display_gx.h
> > index 56e9d2e..ad556d3 100644
> > --- a/drivers/video/geode/display_gx.h
> > +++ b/drivers/video/geode/display_gx.h
> > @@ -16,7 +16,4 @@ int gx_line_delta(int xres, int bpp);
> >
> > extern struct geode_dc_ops gx_dc_ops;
> >
> > -/* MSR that tells us if a TFT or CRT is attached */
> > -#define GLD_MSR_CONFIG_DM_FP 0x40
> > -
> > #endif /* !__DISPLAY_GX1_H__ */
>
> Something has gone wrong here. The code in current mainline is
>
>
>
> extern struct geode_dc_ops gx_dc_ops;
>
> /* MSR that tells us if a TFT or CRT is attached */
> #define GLD_MSR_CONFIG 0xC0002001
> #define GLD_MSR_CONFIG_DM_FP 0x40
>
> /* Display controller registers */
>
>
> whereas you're patching something else.
>
>
> In [1/6] you refer to "the MSR cleanup patch". I don't know what that is.
>
That would be this:
http://thread.gmane.org/gmane.linux.kernel/645387/focus=645636
>
> Please clean up the changelogs - remove those email headers from the
> email-forwarding operation and remove the additional little commentary on
> top: if there's actually anything in there which is needed then it should
> be integrated into the changelog proper, thanks.
>
For future requests, or should I resend these to you?
On Mon, 10 Mar 2008 16:28:44 -0400
Andres Salomon <[email protected]> wrote:
> >
> > In [1/6] you refer to "the MSR cleanup patch". I don't know what that is.
> >
>
> That would be this:
>
> http://thread.gmane.org/gmane.linux.kernel/645387/focus=645636
>
Oh, that. OK, I found that and it still applies and it makes these new
patches apply.
>
> >
> > Please clean up the changelogs - remove those email headers from the
> > email-forwarding operation and remove the additional little commentary on
> > top: if there's actually anything in there which is needed then it should
> > be integrated into the changelog proper, thanks.
> >
>
> For future requests, or should I resend these to you?
Well I cleaned these up and was ready to go, but I think some updates are
needed, please. So please consider, redo and resend everything, including
the already-acked-by-Jordan MSR cleanup.