This continues the gxfb header cleanups. MSRs are defined in geode.h;
the specific bits we care about are defined in gxfb.h.
Signed-off-by: Andres Salomon <[email protected]>
---
drivers/video/geode/display_gx.h | 3 ---
drivers/video/geode/gxfb.h | 16 ++++++++++++++++
drivers/video/geode/gxfb_core.c | 2 +-
drivers/video/geode/video_gx.c | 4 ++--
drivers/video/geode/video_gx.h | 14 --------------
5 files changed, 19 insertions(+), 20 deletions(-)
diff --git a/drivers/video/geode/display_gx.h b/drivers/video/geode/display_gx.h
index 56e9d2e..ad556d3 100644
--- a/drivers/video/geode/display_gx.h
+++ b/drivers/video/geode/display_gx.h
@@ -16,7 +16,4 @@ int gx_line_delta(int xres, int bpp);
extern struct geode_dc_ops gx_dc_ops;
-/* MSR that tells us if a TFT or CRT is attached */
-#define GLD_MSR_CONFIG_DM_FP 0x40
-
#endif /* !__DISPLAY_GX1_H__ */
diff --git a/drivers/video/geode/gxfb.h b/drivers/video/geode/gxfb.h
index d408ad3..c21f9dc 100644
--- a/drivers/video/geode/gxfb.h
+++ b/drivers/video/geode/gxfb.h
@@ -252,4 +252,20 @@ static inline void write_fp(struct geodefb_par *par, int reg, uint32_t val)
writel(val, par->vid_regs + 8*reg + VP_FP_START);
}
+
+/* MSRs are defined in asm/geode.h; their bitfields are here */
+
+#define MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3 (1 << 3)
+#define MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 (1 << 2)
+#define MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 (1 << 1)
+
+#define MSR_GLCP_DOTPLL_LOCK (1 << 25) /* r/o */
+#define MSR_GLCP_DOTPLL_BYPASS (1 << 15)
+#define MSR_GLCP_DOTPLL_DOTRESET (1 << 0)
+
+#define MSR_GX_MSR_PADSEL_MASK 0x3FFFFFFF /* undocumented? */
+#define MSR_GX_MSR_PADSEL_TFT 0x1FFFFFFF /* undocumented? */
+
+#define MSR_GX_GLD_MSR_CONFIG_FP (1 << 3)
+
#endif
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index fd58dcc..0913251 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -328,7 +328,7 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i
rdmsrl(MSR_GX_GLD_MSR_CONFIG, val);
- if ((val & GLD_MSR_CONFIG_DM_FP) == GLD_MSR_CONFIG_DM_FP)
+ if ((val & MSR_GX_GLD_MSR_CONFIG_FP) == MSR_GX_GLD_MSR_CONFIG_FP)
par->enable_crt = 0;
else
par->enable_crt = 1;
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index 1b98b7b..1e26bc4 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/geode/video_gx.c
@@ -187,8 +187,8 @@ gx_configure_tft(struct fb_info *info)
/* Set up the DF pad select MSR */
rdmsrl(MSR_GX_MSR_PADSEL, val);
- val &= ~GX_VP_PAD_SELECT_MASK;
- val |= GX_VP_PAD_SELECT_TFT;
+ val &= ~MSR_GX_MSR_PADSEL_MASK;
+ val |= MSR_GX_MSR_PADSEL_TFT;
wrmsrl(MSR_GX_MSR_PADSEL, val);
/* Turn off the panel */
diff --git a/drivers/video/geode/video_gx.h b/drivers/video/geode/video_gx.h
index 5457bd0..79f6e81 100644
--- a/drivers/video/geode/video_gx.h
+++ b/drivers/video/geode/video_gx.h
@@ -13,18 +13,4 @@
extern struct geode_vid_ops gx_vid_ops;
-/* GX Flatpanel control MSR */
-#define GX_VP_PAD_SELECT_MASK 0x3FFFFFFF
-#define GX_VP_PAD_SELECT_TFT 0x1FFFFFFF
-
-/* Geode GX clock control MSRs */
-
-# define MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 (0x0000000000000002ull)
-# define MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 (0x0000000000000004ull)
-# define MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3 (0x0000000000000008ull)
-
-# define MSR_GLCP_DOTPLL_DOTRESET (0x0000000000000001ull)
-# define MSR_GLCP_DOTPLL_BYPASS (0x0000000000008000ull)
-# define MSR_GLCP_DOTPLL_LOCK (0x0000000002000000ull)
-
#endif /* !__VIDEO_GX_H__ */
--
1.5.3.7