If an IDE controller is in compatibility mode, it expects to use
IRQs 14 and 15, so PNP should avoid them.
This patch should resolve this problem report:
parallel driver grabs IRQ14 preventing legacy SFF ATA controller from working
https://bugzilla.novell.com/show_bug.cgi?id=375836
Signed-off-by: Bjorn Helgaas <[email protected]>
Index: work14/drivers/pnp/resource.c
===================================================================
--- work14.orig/drivers/pnp/resource.c 2008-06-17 15:52:36.000000000 -0600
+++ work14/drivers/pnp/resource.c 2008-06-17 16:14:18.000000000 -0600
@@ -17,6 +17,7 @@
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/init.h>
+#include <linux/libata.h>
#include <linux/pnp.h>
#include "base.h"
@@ -286,6 +287,61 @@ static irqreturn_t pnp_test_handler(int
return IRQ_HANDLED;
}
+#ifdef CONFIG_PCI
+static int pci_dev_uses_irq(struct pnp_dev *pnp, struct pci_dev *pci,
+ unsigned int irq)
+{
+ u32 class;
+ u8 progif;
+
+ if (pci->irq == irq) {
+ dev_dbg(&pnp->dev, "device %s using irq %d\n",
+ pci_name(pci), irq);
+ return 1;
+ }
+
+ /*
+ * See pci_setup_device() and ata_pci_sff_activate_host() for
+ * similar IDE legacy detection.
+ */
+ pci_read_config_dword(pci, PCI_CLASS_REVISION, &class);
+ class >>= 8; /* discard revision ID */
+ progif = class & 0xff;
+ class >>= 8;
+
+ if (class == PCI_CLASS_STORAGE_IDE) {
+ /*
+ * Unless both channels are native-PCI mode only,
+ * treat the compatibility IRQs as busy.
+ */
+ if ((progif & 0x5) != 0x5)
+ if (ATA_PRIMARY_IRQ(pci) == irq ||
+ ATA_SECONDARY_IRQ(pci) == irq) {
+ dev_dbg(&pnp->dev, "legacy IDE device %s "
+ "using irq %d\n", pci_name(pci), irq);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+#endif
+
+static int pci_uses_irq(struct pnp_dev *pnp, unsigned int irq)
+{
+#ifdef CONFIG_PCI
+ struct pci_dev *pci = NULL;
+
+ for_each_pci_dev(pci) {
+ if (pci_dev_uses_irq(pnp, pci, irq)) {
+ pci_dev_put(pci);
+ return 1;
+ }
+ }
+#endif
+ return 0;
+}
+
int pnp_check_irq(struct pnp_dev *dev, struct resource *res)
{
int i;
@@ -317,18 +373,9 @@ int pnp_check_irq(struct pnp_dev *dev, s
}
}
-#ifdef CONFIG_PCI
/* check if the resource is being used by a pci device */
- {
- struct pci_dev *pci = NULL;
- for_each_pci_dev(pci) {
- if (pci->irq == *irq) {
- pci_dev_put(pci);
- return 0;
- }
- }
- }
-#endif
+ if (pci_uses_irq(dev, *irq))
+ return 0;
/* check if the resource is already in use, skip if the
* device is active because it itself may be in use */
--
Hi,
On Wednesday 18 June 2008, Bjorn Helgaas wrote:
> If an IDE controller is in compatibility mode, it expects to use
> IRQs 14 and 15, so PNP should avoid them.
>
> This patch should resolve this problem report:
> parallel driver grabs IRQ14 preventing legacy SFF ATA controller from working
> https://bugzilla.novell.com/show_bug.cgi?id=375836
>
> Signed-off-by: Bjorn Helgaas <[email protected]>
>
> Index: work14/drivers/pnp/resource.c
> ===================================================================
> --- work14.orig/drivers/pnp/resource.c 2008-06-17 15:52:36.000000000 -0600
> +++ work14/drivers/pnp/resource.c 2008-06-17 16:14:18.000000000 -0600
> @@ -17,6 +17,7 @@
> #include <linux/pci.h>
> #include <linux/ioport.h>
> #include <linux/init.h>
> +#include <linux/libata.h>
this include is for libata only AFAIK
[ I added Jeff to cc: ]
> #include <linux/pnp.h>
> #include "base.h"
> @@ -286,6 +287,61 @@ static irqreturn_t pnp_test_handler(int
> return IRQ_HANDLED;
> }
>
> +#ifdef CONFIG_PCI
> +static int pci_dev_uses_irq(struct pnp_dev *pnp, struct pci_dev *pci,
> + unsigned int irq)
> +{
> + u32 class;
> + u8 progif;
> +
> + if (pci->irq == irq) {
> + dev_dbg(&pnp->dev, "device %s using irq %d\n",
> + pci_name(pci), irq);
> + return 1;
> + }
> +
> + /*
> + * See pci_setup_device() and ata_pci_sff_activate_host() for
> + * similar IDE legacy detection.
> + */
> + pci_read_config_dword(pci, PCI_CLASS_REVISION, &class);
> + class >>= 8; /* discard revision ID */
> + progif = class & 0xff;
> + class >>= 8;
> +
> + if (class == PCI_CLASS_STORAGE_IDE) {
> + /*
> + * Unless both channels are native-PCI mode only,
> + * treat the compatibility IRQs as busy.
> + */
> + if ((progif & 0x5) != 0x5)
> + if (ATA_PRIMARY_IRQ(pci) == irq ||
> + ATA_SECONDARY_IRQ(pci) == irq) {
ATA_*_IRQ are libata specific (+ it looks like they should be removed),
please use pci_get_legacy_ide_irq(dev, channel) instead.
Thanks,
Bart