Convert printks to use dev_printk().
I converted DBG() to dev_dbg(). This DBG() is from arch/x86/pci/pci.h
and requires source-code modification to enable, so dev_dbg() seems
roughly equivalent.
Signed-off-by: Bjorn Helgaas <[email protected]>
Index: linux-mm/arch/x86/pci/irq.c
===================================================================
--- linux-mm.orig/arch/x86/pci/irq.c 2008-07-07 14:09:00.000000000 -0600
+++ linux-mm/arch/x86/pci/irq.c 2008-07-07 16:40:35.000000000 -0600
@@ -918,20 +918,20 @@ static int pcibios_lookup_irq(struct pci
if (!pirq_table)
return 0;
- DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
info = pirq_get_info(dev);
if (!info) {
- DBG(" -> not found in routing table\n" KERN_DEBUG);
+ dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n",
+ 'A' + pin);
return 0;
}
pirq = info->irq[pin].link;
mask = info->irq[pin].bitmap;
if (!pirq) {
- DBG(" -> not routed\n" KERN_DEBUG);
+ dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin);
return 0;
}
- DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask,
- pirq_table->exclusive_irqs);
+ dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x",
+ 'A' + pin, pirq, mask, pirq_table->exclusive_irqs);
mask &= pcibios_irq_mask;
/* Work around broken HP Pavilion Notebooks which assign USB to
@@ -961,10 +961,8 @@ static int pcibios_lookup_irq(struct pci
if (pci_probe & PCI_USE_PIRQ_MASK)
newirq = 0;
else
- printk("\n" KERN_WARNING
- "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n"
- KERN_DEBUG, newirq,
- pci_name(dev));
+ dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask "
+ "%#x; try pci=usepirqmask\n", newirq, mask);
}
if (!newirq && assign) {
for (i = 0; i < 16; i++) {
@@ -975,39 +973,35 @@ static int pcibios_lookup_irq(struct pci
newirq = i;
}
}
- DBG(" -> newirq=%d", newirq);
+ dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin, newirq);
/* Check if it is hardcoded */
if ((pirq & 0xf0) == 0xf0) {
irq = pirq & 0xf;
- DBG(" -> hardcoded IRQ %d\n", irq);
- msg = "Hardcoded";
+ msg = "hardcoded";
} else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
- DBG(" -> got IRQ %d\n", irq);
- msg = "Found";
+ msg = "found";
eisa_set_level_irq(irq);
} else if (newirq && r->set &&
(dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
- DBG(" -> assigning IRQ %d", newirq);
if (r->set(pirq_router_dev, dev, pirq, newirq)) {
eisa_set_level_irq(newirq);
- DBG(" ... OK\n");
- msg = "Assigned";
+ msg = "assigned";
irq = newirq;
}
}
if (!irq) {
- DBG(" ... failed\n");
if (newirq && mask == (1 << newirq)) {
- msg = "Guessed";
+ msg = "guessed";
irq = newirq;
- } else
+ } else {
+ dev_dbg(&dev->dev, "can't route interrupt\n");
return 0;
+ }
}
- printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq,
- pci_name(dev));
+ dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin, irq);
/* Update IRQ for all devices with the same pirq value */
while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -1027,18 +1021,17 @@ static int pcibios_lookup_irq(struct pci
(!(pci_probe & PCI_USE_PIRQ_MASK) || \
((1 << dev2->irq) & mask))) {
#ifndef CONFIG_PCI_MSI
- printk(KERN_INFO
- "IRQ routing conflict for %s, have irq %d, want irq %d\n",
- pci_name(dev2), dev2->irq, irq);
+ dev_info(&dev2->dev, "IRQ routing conflict: "
+ "have IRQ %d, want IRQ %d\n",
+ dev2->irq, irq);
#endif
continue;
}
dev2->irq = irq;
pirq_penalty[irq]++;
if (dev != dev2)
- printk(KERN_INFO
- "PCI: Sharing IRQ %d with %s\n",
- irq, pci_name(dev2));
+ dev_info(&dev->dev, "sharing IRQ %d with %s\n",
+ irq, pci_name(dev2));
}
}
return 1;
@@ -1057,8 +1050,7 @@ static void __init pcibios_fixup_irqs(vo
* already in use.
*/
if (dev->irq >= 16) {
- DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n",
- pci_name(dev), dev->irq);
+ dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq);
dev->irq = 0;
}
/*
@@ -1104,15 +1096,16 @@ static void __init pcibios_fixup_irqs(vo
PCI_SLOT(bridge->devfn),
pin);
if (irq >= 0)
- printk(KERN_WARNING
- "PCI: using PPB %s[%c] to get irq %d\n",
- pci_name(bridge),
- 'A' + pin, irq);
+ dev_warn(&dev->dev, "using "
+ "bridge %s INT %c to "
+ "get IRQ %d\n",
+ pci_name(bridge),
+ 'A' + pin, irq);
}
if (irq >= 0) {
- printk(KERN_INFO
- "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
- pci_name(dev), 'A' + pin, irq);
+ dev_info(&dev->dev, "PCI->APIC IRQ "
+ "transform: INT %c -> "
+ "IRQ %d\n", 'A' + pin, irq);
dev->irq = irq;
}
}
@@ -1275,25 +1268,24 @@ static int pirq_enable_irq(struct pci_de
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn), pin);
if (irq >= 0)
- printk(KERN_WARNING
- "PCI: using PPB %s[%c] to get irq %d\n",
- pci_name(bridge),
- 'A' + pin, irq);
+ dev_warn(&dev->dev, "using bridge %s "
+ "INT %c to get IRQ %d\n",
+ pci_name(bridge), 'A' + pin,
+ irq);
dev = bridge;
}
dev = temp_dev;
if (irq >= 0) {
- printk(KERN_INFO
- "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
- pci_name(dev), 'A' + pin, irq);
+ dev_info(&dev->dev, "PCI->APIC IRQ transform: "
+ "INT %c -> IRQ %d\n", 'A' + pin, irq);
dev->irq = irq;
return 0;
} else
- msg = " Probably buggy MP table.";
+ msg = "; probably buggy MP table";
} else if (pci_probe & PCI_BIOS_IRQ_SCAN)
msg = "";
else
- msg = " Please try using pci=biosirq.";
+ msg = "; please try using pci=biosirq";
/*
* With IDE legacy devices the IRQ lookup failure is not
@@ -1303,9 +1295,8 @@ static int pirq_enable_irq(struct pci_de
!(dev->class & 0x5))
return 0;
- printk(KERN_WARNING
- "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
- 'A' + pin, pci_name(dev), msg);
+ dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n",
+ 'A' + pin, msg);
}
return 0;
}
--