Ciao Ingo,
Before:
total: 15 errors, 10 warnings, 308 lines checked
After:
total: 0 errors, 4 warnings, 308 lines checked
paolo@paolo-desktop:~/linux.trees.git$ md5sum /tmp/elafreq.o.*
add1d36c2f077c5aab7682e8642a9f34 /tmp/elafreq.o.after
add1d36c2f077c5aab7682e8642a9f34 /tmp/elafreq.o.before
paolo@paolo-desktop:~/linux.trees.git$ size /tmp/elafreq.o.*
text data bss dec hex filename
934 270 4 1208 4b8 /tmp/elafreq.o.after
934 270 4 1208 4b8 /tmp/elafreq.o.before
Signed-off-by: Paolo Ciarrocchi <[email protected]>
---
arch/x86/kernel/cpu/cpufreq/elanfreq.c | 42 ++++++++++++++++----------------
1 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
index 94619c2..515d10b 100644
--- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
@@ -25,8 +25,8 @@
#include <linux/cpufreq.h>
#include <asm/msr.h>
-#include <asm/timex.h>
-#include <asm/io.h>
+#include <linux/timex.h>
+#include <linux/io.h>
#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */
#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */
@@ -82,7 +82,7 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
u8 clockspeed_reg; /* Clock Speed Register */
local_irq_disable();
- outb_p(0x80,REG_CSCIR);
+ outb_p(0x80, REG_CSCIR);
clockspeed_reg = inb_p(REG_CSCDR);
local_irq_enable();
@@ -98,10 +98,10 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
}
/* 33 MHz is not 32 MHz... */
- if ((clockspeed_reg & 0xE0)==0xA0)
+ if ((clockspeed_reg & 0xE0) == 0xA0)
return 33000;
- return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000);
+ return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000;
}
@@ -117,7 +117,7 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
* There is no return value.
*/
-static void elanfreq_set_cpu_state (unsigned int state)
+static void elanfreq_set_cpu_state(unsigned int state)
{
struct cpufreq_freqs freqs;
@@ -144,20 +144,20 @@ static void elanfreq_set_cpu_state (unsigned int state)
*/
local_irq_disable();
- outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */
- outb_p(0x00,REG_CSCDR);
+ outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */
+ outb_p(0x00, REG_CSCDR);
local_irq_enable(); /* wait till internal pipelines and */
udelay(1000); /* buffers have cleaned up */
local_irq_disable();
/* now, set the CPU clock speed register (0x80) */
- outb_p(0x80,REG_CSCIR);
- outb_p(elan_multiplier[state].val80h,REG_CSCDR);
+ outb_p(0x80, REG_CSCIR);
+ outb_p(elan_multiplier[state].val80h, REG_CSCDR);
/* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
- outb_p(0x40,REG_CSCIR);
- outb_p(elan_multiplier[state].val40h,REG_CSCDR);
+ outb_p(0x40, REG_CSCIR);
+ outb_p(elan_multiplier[state].val40h, REG_CSCDR);
udelay(10000);
local_irq_enable();
@@ -173,12 +173,12 @@ static void elanfreq_set_cpu_state (unsigned int state)
* for the hardware supported by the driver.
*/
-static int elanfreq_verify (struct cpufreq_policy *policy)
+static int elanfreq_verify(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
}
-static int elanfreq_target (struct cpufreq_policy *policy,
+static int elanfreq_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
@@ -205,7 +205,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy)
/* capability check */
if ((c->x86_vendor != X86_VENDOR_AMD) ||
- (c->x86 != 4) || (c->x86_model!=10))
+ (c->x86 != 4) || (c->x86_model != 10))
return -ENODEV;
/* max freq */
@@ -213,7 +213,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy)
max_freq = elanfreq_get_cpu_frequency(0);
/* table init */
- for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+ for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
if (elanfreq_table[i].frequency > max_freq)
elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
}
@@ -224,7 +224,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy)
result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
if (result)
- return (result);
+ return result;
cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
return 0;
@@ -260,7 +260,7 @@ __setup("elanfreq=", elanfreq_setup);
#endif
-static struct freq_attr* elanfreq_attr[] = {
+static struct freq_attr *elanfreq_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
@@ -284,9 +284,9 @@ static int __init elanfreq_init(void)
/* Test if we have the right hardware */
if ((c->x86_vendor != X86_VENDOR_AMD) ||
- (c->x86 != 4) || (c->x86_model!=10)) {
+ (c->x86 != 4) || (c->x86_model != 10)) {
printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
- return -ENODEV;
+ return -ENODEV;
}
return cpufreq_register_driver(&elanfreq_driver);
}
@@ -298,7 +298,7 @@ static void __exit elanfreq_exit(void)
}
-module_param (max_freq, int, 0444);
+module_param(max_freq, int, 0444);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Robert Schwebel <[email protected]>, Sven Geggus <[email protected]>");
--
1.5.6.rc1.21.g03300