2008-08-27 23:35:04

by Seth Heasley

[permalink] [raw]
Subject: [PATCH 2.6.26.7-rc4] ata_piix: IDE Mode SATA patch for Intel Ibex Peak DeviceIDs

This patch updates the Intel Ibex Peak (PCH) IDE mode SATA Controller DeviceIDs.

Signed-off-by: Seth Heasley <[email protected]>

--- linux-2.6/drivers/ata/ata_piix.c.orig 2008-08-27 11:32:28.000000000 -0700
+++ linux-2.6/drivers/ata/ata_piix.c 2008-08-27 11:47:59.000000000 -0700
@@ -278,12 +278,15 @@
/* SATA Controller IDE (PCH) */
{ 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (PCH) */
{ 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b28, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ /* SATA Controller IDE (PCH) */
{ 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (PCH) */
{ 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
-
{ } /* terminate list */
};


2008-08-27 23:39:41

by Seth Heasley

[permalink] [raw]
Subject: RE: [PATCH 2.6.26.7-rc4] ata_piix: IDE Mode SATA patch for Intel Ibex Peak DeviceIDs

>-----Original Message-----
>From: Heasley, Seth
>Sent: Wednesday, August 27, 2008 4:40 PM
>To: [email protected]; [email protected]; linux-
>[email protected]; [email protected]
>Cc: Heasley, Seth
>Subject: [PATCH 2.6.26.7-rc4] ata_piix: IDE Mode SATA patch for Intel Ibex
>Peak DeviceIDs
>
>This patch updates the Intel Ibex Peak (PCH) IDE mode SATA Controller
>DeviceIDs.
>
>Signed-off-by: Seth Heasley <[email protected]>
>
>--- linux-2.6/drivers/ata/ata_piix.c.orig 2008-08-27
>11:32:28.000000000 -0700
>+++ linux-2.6/drivers/ata/ata_piix.c 2008-08-27 11:47:59.000000000 -0700
>@@ -278,12 +278,15 @@
> /* SATA Controller IDE (PCH) */
> { 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
> /* SATA Controller IDE (PCH) */
>+ { 0x8086, 0x3b21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
>+ /* SATA Controller IDE (PCH) */
> { 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
> /* SATA Controller IDE (PCH) */
>+ { 0x8086, 0x3b28, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
>+ /* SATA Controller IDE (PCH) */
> { 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
> /* SATA Controller IDE (PCH) */
> { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
>-
> { } /* terminate list */
> };

Typo in the subject line. Should read 2.6.27-rc4. This was built against http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

2008-08-27 23:57:26

by Jeff Garzik

[permalink] [raw]
Subject: Re: [PATCH 2.6.26.7-rc4] ata_piix: IDE Mode SATA patch for Intel Ibex Peak DeviceIDs

Heasley, Seth wrote:
>> -----Original Message-----
>> From: Heasley, Seth
>> Sent: Wednesday, August 27, 2008 4:40 PM
>> To: [email protected]; [email protected]; linux-
>> [email protected]; [email protected]
>> Cc: Heasley, Seth
>> Subject: [PATCH 2.6.26.7-rc4] ata_piix: IDE Mode SATA patch for Intel Ibex
>> Peak DeviceIDs
>>
>> This patch updates the Intel Ibex Peak (PCH) IDE mode SATA Controller
>> DeviceIDs.
>>
>> Signed-off-by: Seth Heasley <[email protected]>
>>
>> --- linux-2.6/drivers/ata/ata_piix.c.orig 2008-08-27
>> 11:32:28.000000000 -0700
>> +++ linux-2.6/drivers/ata/ata_piix.c 2008-08-27 11:47:59.000000000 -0700
>> @@ -278,12 +278,15 @@
>> /* SATA Controller IDE (PCH) */
>> { 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
>> /* SATA Controller IDE (PCH) */
>> + { 0x8086, 0x3b21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
>> + /* SATA Controller IDE (PCH) */
>> { 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
>> /* SATA Controller IDE (PCH) */
>> + { 0x8086, 0x3b28, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
>> + /* SATA Controller IDE (PCH) */
>> { 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
>> /* SATA Controller IDE (PCH) */
>> { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
>> -
>> { } /* terminate list */
>> };
>
> Typo in the subject line. Should read 2.6.27-rc4. This was built against http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

A process note...

If you are building against torvalds/linux-2.6.git -- a good thing --
then it is helpful to include the top-most commit id in your message [if
you feel it is relevant information].

For patches, meta-information like commit ids or special instructions to
the maintainer can be included following a "---" separator (on a line by
itself).

As an example, see this patch from Tejun, which includes a diffstat(1)
output and note about MAXTOR in the meta-information area of the patch:

http://marc.info/?l=linux-ide&m=118835646130927&w=2

Our tools are specially programmed to exclude the meta-information from
the text copied into the permanent kernel linux-2.6.git changelog.

Jeff