>From 32fe58c5a4a162e9d6ab4aca91692e0e28167f97 Mon Sep 17 00:00:00 2001
From: Pekka Paalanen <[email protected]>
Date: Sat, 3 Jan 2009 21:09:27 +0200
Subject: [PATCH] doc: update mmiotrace.txt
The tracing framework buffer size file in debugfs has changed.
Signed-off-by: Pekka Paalanen <[email protected]>
---
Ingo, I'm hoping these three patches would make it into .29.
Thanks.
Documentation/tracers/mmiotrace.txt | 6 ++----
1 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/tracers/mmiotrace.txt
index cde23b4..5731c67 100644
--- a/Documentation/tracers/mmiotrace.txt
+++ b/Documentation/tracers/mmiotrace.txt
@@ -78,12 +78,10 @@ to view your kernel log and look for "mmiotrace has lost events" warning. If
events were lost, the trace is incomplete. You should enlarge the buffers and
try again. Buffers are enlarged by first seeing how large the current buffers
are:
-$ cat /debug/tracing/trace_entries
+$ cat /debug/tracing/buffer_size_kb
gives you a number. Approximately double this number and write it back, for
instance:
-$ echo 0 > /debug/tracing/tracing_enabled
-$ echo 128000 > /debug/tracing/trace_entries
-$ echo 1 > /debug/tracing/tracing_enabled
+$ echo 128000 > /debug/tracing/buffer_size_kb
Then start again from the top.
If you are doing a trace for a driver project, e.g. Nouveau, you should also
--
1.6.0.6
>From a9fefe5d5775939ae3bb76fad16510cfd89521f8 Mon Sep 17 00:00:00 2001
From: Pekka Paalanen <[email protected]>
Date: Sat, 3 Jan 2009 21:23:51 +0200
Subject: [PATCH] trace: move the MMIO-tracer to the tracer menu
This patch was originally suggested by Peter Zijlstra, but seems it
was forgotten.
Signed-off-by: Pekka Paalanen <[email protected]>
---
arch/x86/Kconfig.debug | 24 ++----------------------
kernel/trace/Kconfig | 23 +++++++++++++++++++++++
2 files changed, 25 insertions(+), 22 deletions(-)
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 01649e1..097d79a 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -175,28 +175,8 @@ config IOMMU_LEAK
Add a simple leak tracer to the IOMMU code. This is useful when you
are debugging a buggy device driver that leaks IOMMU mappings.
-config MMIOTRACE
- bool "Memory mapped IO tracing"
- depends on DEBUG_KERNEL && PCI
- select TRACING
- help
- Mmiotrace traces Memory Mapped I/O access and is meant for
- debugging and reverse engineering. It is called from the ioremap
- implementation and works via page faults. Tracing is disabled by
- default and can be enabled at run-time.
-
- See Documentation/tracers/mmiotrace.txt.
- If you are not helping to develop drivers, say N.
-
-config MMIOTRACE_TEST
- tristate "Test module for mmiotrace"
- depends on MMIOTRACE && m
- help
- This is a dumb module for testing mmiotrace. It is very dangerous
- as it will write garbage to IO memory starting at a given address.
- However, it should be safe to use on e.g. unused portion of VRAM.
-
- Say N, unless you absolutely know what you are doing.
+config HAVE_MMIOTRACE_SUPPORT
+ def_bool y
#
# IO delay types:
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 1c0b750..9442392 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -323,4 +323,27 @@ config FTRACE_STARTUP_TEST
functioning properly. It will do tests on all the configured
tracers of ftrace.
+config MMIOTRACE
+ bool "Memory mapped IO tracing"
+ depends on HAVE_MMIOTRACE_SUPPORT && DEBUG_KERNEL && PCI
+ select TRACING
+ help
+ Mmiotrace traces Memory Mapped I/O access and is meant for
+ debugging and reverse engineering. It is called from the ioremap
+ implementation and works via page faults. Tracing is disabled by
+ default and can be enabled at run-time.
+
+ See Documentation/tracers/mmiotrace.txt.
+ If you are not helping to develop drivers, say N.
+
+config MMIOTRACE_TEST
+ tristate "Test module for mmiotrace"
+ depends on MMIOTRACE && m
+ help
+ This is a dumb module for testing mmiotrace. It is very dangerous
+ as it will write garbage to IO memory starting at a given address.
+ However, it should be safe to use on e.g. unused portion of VRAM.
+
+ Say N, unless you absolutely know what you are doing.
+
endmenu
--
1.6.0.6
>From 8fbe1e5f24a2ffb173b900c0d54c771b1fa13446 Mon Sep 17 00:00:00 2001
From: Pekka Paalanen <[email protected]>
Date: Tue, 6 Jan 2009 13:57:11 +0200
Subject: [PATCH] mmiotrace: count events lost due to not recording
The tracing framework, or the ring buffer facility it uses, has a switch
to stop recording data. When recording is off, the trace events will be
lost. The framework does not count these, so mmiotrace has to count them
itself.
Signed-off-by: Pekka Paalanen <[email protected]>
---
kernel/trace/trace_mmiotrace.c | 14 ++++++++++----
1 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c
index fcec59f..621c8c3 100644
--- a/kernel/trace/trace_mmiotrace.c
+++ b/kernel/trace/trace_mmiotrace.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/mmiotrace.h>
#include <linux/pci.h>
+#include <asm/atomic.h>
#include "trace.h"
#include "trace_output.h"
@@ -20,6 +21,7 @@ struct header_iter {
static struct trace_array *mmio_trace_array;
static bool overrun_detected;
static unsigned long prev_overruns;
+static atomic_t dropped_count;
static void mmio_reset_data(struct trace_array *tr)
{
@@ -122,11 +124,11 @@ static void mmio_close(struct trace_iterator *iter)
static unsigned long count_overruns(struct trace_iterator *iter)
{
- unsigned long cnt = 0;
+ unsigned long cnt = atomic_xchg(&dropped_count, 0);
unsigned long over = ring_buffer_overruns(iter->tr->buffer);
if (over > prev_overruns)
- cnt = over - prev_overruns;
+ cnt += over - prev_overruns;
prev_overruns = over;
return cnt;
}
@@ -308,8 +310,10 @@ static void __trace_mmiotrace_rw(struct trace_array *tr,
event = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry),
&irq_flags);
- if (!event)
+ if (!event) {
+ atomic_inc(&dropped_count);
return;
+ }
entry = ring_buffer_event_data(event);
tracing_generic_entry_update(&entry->ent, 0, preempt_count());
entry->ent.type = TRACE_MMIO_RW;
@@ -336,8 +340,10 @@ static void __trace_mmiotrace_map(struct trace_array *tr,
event = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry),
&irq_flags);
- if (!event)
+ if (!event) {
+ atomic_inc(&dropped_count);
return;
+ }
entry = ring_buffer_event_data(event);
tracing_generic_entry_update(&entry->ent, 0, preempt_count());
entry->ent.type = TRACE_MMIO_MAP;
--
1.6.0.6
On Thu, 8 Jan 2009, Pekka Paalanen wrote:
> From 32fe58c5a4a162e9d6ab4aca91692e0e28167f97 Mon Sep 17 00:00:00 2001
> From: Pekka Paalanen <[email protected]>
> Date: Sat, 3 Jan 2009 21:09:27 +0200
> Subject: [PATCH] doc: update mmiotrace.txt
>
> The tracing framework buffer size file in debugfs has changed.
>
> Signed-off-by: Pekka Paalanen <[email protected]>
Pekka,
Can you resubmit these with a better change log on the first two, and an
Impact line on each.
Thanks,
-- Steve
>From 297ddd1d79f7826bdd058b1bfd580dcaf97d3946 Mon Sep 17 00:00:00 2001
From: Pekka Paalanen <[email protected]>
Date: Sat, 3 Jan 2009 21:09:27 +0200
Subject: [PATCH] doc: mmiotrace.txt, buffer size control change
Impact: prevents confusing the user when buffer size is inadequate
The tracing framework offers a resizeable buffer, which mmiotrace uses
to record events. If the buffer is full, the following events will be
lost. Events should not be lost, so the documentation instructs the user
to increase the buffer size. The buffer size is set via a debugfs file.
Mmiotrace documentation was not updated the same time the debugfs file
was changed. The old file was tracing/trace_entries and first contained
the number of entries the buffer had space for, per cpu. Nowadays this
file is replaced with the file tracing/buffer_size_kb, which tells the
amount of memory reserved for the buffer, per cpu, in kilobytes.
Previously, a flag had to be toggled via the debugfs file
tracing/tracing_enabled when the buffer size was changed. This is no
longer necessary.
The mmiotrace documentation is updated to reflect the current state of
the tracing framework.
Signed-off-by: Pekka Paalanen <[email protected]>
---
Documentation/tracers/mmiotrace.txt | 6 ++----
1 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/tracers/mmiotrace.txt
index cde23b4..5731c67 100644
--- a/Documentation/tracers/mmiotrace.txt
+++ b/Documentation/tracers/mmiotrace.txt
@@ -78,12 +78,10 @@ to view your kernel log and look for "mmiotrace has lost events" warning. If
events were lost, the trace is incomplete. You should enlarge the buffers and
try again. Buffers are enlarged by first seeing how large the current buffers
are:
-$ cat /debug/tracing/trace_entries
+$ cat /debug/tracing/buffer_size_kb
gives you a number. Approximately double this number and write it back, for
instance:
-$ echo 0 > /debug/tracing/tracing_enabled
-$ echo 128000 > /debug/tracing/trace_entries
-$ echo 1 > /debug/tracing/tracing_enabled
+$ echo 128000 > /debug/tracing/buffer_size_kb
Then start again from the top.
If you are doing a trace for a driver project, e.g. Nouveau, you should also
--
1.6.0.6
>From 9ce66da6670fd92e626d5adbcdabe81f2a79f2dc Mon Sep 17 00:00:00 2001
From: Pekka Paalanen <[email protected]>
Date: Sat, 3 Jan 2009 21:23:51 +0200
Subject: [PATCH] trace: mmiotrace to the tracer menu in Kconfig
Impact: cosmetic change in Kconfig menu layout
This patch was originally suggested by Peter Zijlstra, but seems it
was forgotten.
CONFIG_MMIOTRACE and CONFIG_MMIOTRACE_TEST were selectable
directly under the Kernel hacking / debugging menu in the kernel
configuration system. They were present only for x86 and x86_64.
Other tracers that use the ftrace tracing framework are in their own
sub-menu. This patch moves the mmiotrace configuration options there.
Since the Kconfig file, where the tracer menu is, is not architecture
specific, HAVE_MMIOTRACE_SUPPORT is introduced and provided only by
x86/x86_64. CONFIG_MMIOTRACE now depends on it.
Signed-off-by: Pekka Paalanen <[email protected]>
---
arch/x86/Kconfig.debug | 24 ++----------------------
kernel/trace/Kconfig | 23 +++++++++++++++++++++++
2 files changed, 25 insertions(+), 22 deletions(-)
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 01649e1..097d79a 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -175,28 +175,8 @@ config IOMMU_LEAK
Add a simple leak tracer to the IOMMU code. This is useful when you
are debugging a buggy device driver that leaks IOMMU mappings.
-config MMIOTRACE
- bool "Memory mapped IO tracing"
- depends on DEBUG_KERNEL && PCI
- select TRACING
- help
- Mmiotrace traces Memory Mapped I/O access and is meant for
- debugging and reverse engineering. It is called from the ioremap
- implementation and works via page faults. Tracing is disabled by
- default and can be enabled at run-time.
-
- See Documentation/tracers/mmiotrace.txt.
- If you are not helping to develop drivers, say N.
-
-config MMIOTRACE_TEST
- tristate "Test module for mmiotrace"
- depends on MMIOTRACE && m
- help
- This is a dumb module for testing mmiotrace. It is very dangerous
- as it will write garbage to IO memory starting at a given address.
- However, it should be safe to use on e.g. unused portion of VRAM.
-
- Say N, unless you absolutely know what you are doing.
+config HAVE_MMIOTRACE_SUPPORT
+ def_bool y
#
# IO delay types:
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 1c0b750..9442392 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -323,4 +323,27 @@ config FTRACE_STARTUP_TEST
functioning properly. It will do tests on all the configured
tracers of ftrace.
+config MMIOTRACE
+ bool "Memory mapped IO tracing"
+ depends on HAVE_MMIOTRACE_SUPPORT && DEBUG_KERNEL && PCI
+ select TRACING
+ help
+ Mmiotrace traces Memory Mapped I/O access and is meant for
+ debugging and reverse engineering. It is called from the ioremap
+ implementation and works via page faults. Tracing is disabled by
+ default and can be enabled at run-time.
+
+ See Documentation/tracers/mmiotrace.txt.
+ If you are not helping to develop drivers, say N.
+
+config MMIOTRACE_TEST
+ tristate "Test module for mmiotrace"
+ depends on MMIOTRACE && m
+ help
+ This is a dumb module for testing mmiotrace. It is very dangerous
+ as it will write garbage to IO memory starting at a given address.
+ However, it should be safe to use on e.g. unused portion of VRAM.
+
+ Say N, unless you absolutely know what you are doing.
+
endmenu
--
1.6.0.6
>From 7b1371189e38609f74c68a7b83c0a7a038a9b712 Mon Sep 17 00:00:00 2001
From: Pekka Paalanen <[email protected]>
Date: Tue, 6 Jan 2009 13:57:11 +0200
Subject: [PATCH] mmiotrace: count events lost due to not recording
Impact: enhances lost events counting in mmiotrace
The tracing framework, or the ring buffer facility it uses, has a switch
to stop recording data. When recording is off, the trace events will be
lost. The framework does not count these, so mmiotrace has to count them
itself.
Signed-off-by: Pekka Paalanen <[email protected]>
---
kernel/trace/trace_mmiotrace.c | 14 ++++++++++----
1 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c
index fcec59f..621c8c3 100644
--- a/kernel/trace/trace_mmiotrace.c
+++ b/kernel/trace/trace_mmiotrace.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/mmiotrace.h>
#include <linux/pci.h>
+#include <asm/atomic.h>
#include "trace.h"
#include "trace_output.h"
@@ -20,6 +21,7 @@ struct header_iter {
static struct trace_array *mmio_trace_array;
static bool overrun_detected;
static unsigned long prev_overruns;
+static atomic_t dropped_count;
static void mmio_reset_data(struct trace_array *tr)
{
@@ -122,11 +124,11 @@ static void mmio_close(struct trace_iterator *iter)
static unsigned long count_overruns(struct trace_iterator *iter)
{
- unsigned long cnt = 0;
+ unsigned long cnt = atomic_xchg(&dropped_count, 0);
unsigned long over = ring_buffer_overruns(iter->tr->buffer);
if (over > prev_overruns)
- cnt = over - prev_overruns;
+ cnt += over - prev_overruns;
prev_overruns = over;
return cnt;
}
@@ -308,8 +310,10 @@ static void __trace_mmiotrace_rw(struct trace_array *tr,
event = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry),
&irq_flags);
- if (!event)
+ if (!event) {
+ atomic_inc(&dropped_count);
return;
+ }
entry = ring_buffer_event_data(event);
tracing_generic_entry_update(&entry->ent, 0, preempt_count());
entry->ent.type = TRACE_MMIO_RW;
@@ -336,8 +340,10 @@ static void __trace_mmiotrace_map(struct trace_array *tr,
event = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry),
&irq_flags);
- if (!event)
+ if (!event) {
+ atomic_inc(&dropped_count);
return;
+ }
entry = ring_buffer_event_data(event);
tracing_generic_entry_update(&entry->ent, 0, preempt_count());
entry->ent.type = TRACE_MMIO_MAP;
--
1.6.0.6