2008-12-29 10:23:55

by Julia Lawall

[permalink] [raw]
Subject: [PATCH 12/13] drivers/usb/musb: use USB API functions rather than constants

From: Julia Lawall <[email protected]>

This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
- \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)

@inc@
@@

#include <linux/usb.h>

@depends on !inc && (r1||r5)@
@@

+ #include <linux/usb.h>
#include <linux/usb/...>
// </smpl>

Signed-off-by: Julia Lawall <[email protected]>

---
drivers/usb/musb/musb_gadget.c | 6 +++---
drivers/usb/musb/musb_host.c | 4 ++--
2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 6197dae..4ea3053 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -874,10 +874,10 @@ static int musb_gadget_enable(struct usb_ep *ep,
status = -EBUSY;
goto fail;
}
- musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ musb_ep->type = usb_endpoint_type(desc);

/* check direction and (later) maxpacket size against endpoint */
- if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum)
+ if (usb_endpoint_num(desc) != epnum)
goto fail;

/* REVISIT this rules out high bandwidth periodic transfers */
@@ -890,7 +890,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
* packet size (or fail), set the mode, clear the fifo
*/
musb_ep_select(mbase, epnum);
- if (desc->bEndpointAddress & USB_DIR_IN) {
+ if (usb_endpoint_dir_in(desc)) {
u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);

if (hw_ep->is_shared_fifo)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 99fa612..a035cec 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1847,8 +1847,8 @@ static int musb_urb_enqueue(
goto done;
}

- qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
- qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ qh->epnum = usb_endpoint_num(epd);
+ qh->type = usb_endpoint_type(epd);

/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
qh->addr_reg = (u8) usb_pipedevice(urb->pipe);


2009-01-23 17:33:04

by Felipe Balbi

[permalink] [raw]
Subject: Re: [PATCH 12/13] drivers/usb/musb: use USB API functions rather than constants

On Mon, Dec 29, 2008 at 11:23:22AM +0100, Julia Lawall wrote:
> From: Julia Lawall <[email protected]>
>
> This set of patches introduces calls to the following set of functions:
>
> usb_endpoint_dir_in(epd)
> usb_endpoint_dir_out(epd)
> usb_endpoint_is_bulk_in(epd)
> usb_endpoint_is_bulk_out(epd)
> usb_endpoint_is_int_in(epd)
> usb_endpoint_is_int_out(epd)
> usb_endpoint_num(epd)
> usb_endpoint_type(epd)
> usb_endpoint_xfer_bulk(epd)
> usb_endpoint_xfer_control(epd)
> usb_endpoint_xfer_int(epd)
> usb_endpoint_xfer_isoc(epd)
>
> In some cases, introducing one of these functions is not possible, and it
> just replaces an explicit integer value by one of the following constants:
>
> USB_ENDPOINT_XFER_BULK
> USB_ENDPOINT_XFER_CONTROL
> USB_ENDPOINT_XFER_INT
> USB_ENDPOINT_XFER_ISOC
>
> An extract of the semantic patch that makes these changes is as follows:
> (http://www.emn.fr/x-info/coccinelle/)
>
> // <smpl>
> @r1@ struct usb_endpoint_descriptor *epd; @@
>
> - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
> - \(USB_ENDPOINT_XFER_CONTROL\|0\))
> + usb_endpoint_xfer_control(epd)
>
> @r5@ struct usb_endpoint_descriptor *epd; @@
>
> - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
> - \(USB_DIR_IN\|0x80\))
> + usb_endpoint_dir_in(epd)
>
> @inc@
> @@
>
> #include <linux/usb.h>
>
> @depends on !inc && (r1||r5)@
> @@
>
> + #include <linux/usb.h>
> #include <linux/usb/...>
> // </smpl>
>
> Signed-off-by: Julia Lawall <[email protected]>

Acked-by: Felipe Balbi <[email protected]>

> ---
> drivers/usb/musb/musb_gadget.c | 6 +++---
> drivers/usb/musb/musb_host.c | 4 ++--
> 2 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
> index 6197dae..4ea3053 100644
> --- a/drivers/usb/musb/musb_gadget.c
> +++ b/drivers/usb/musb/musb_gadget.c
> @@ -874,10 +874,10 @@ static int musb_gadget_enable(struct usb_ep *ep,
> status = -EBUSY;
> goto fail;
> }
> - musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
> + musb_ep->type = usb_endpoint_type(desc);
>
> /* check direction and (later) maxpacket size against endpoint */
> - if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum)
> + if (usb_endpoint_num(desc) != epnum)
> goto fail;
>
> /* REVISIT this rules out high bandwidth periodic transfers */
> @@ -890,7 +890,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
> * packet size (or fail), set the mode, clear the fifo
> */
> musb_ep_select(mbase, epnum);
> - if (desc->bEndpointAddress & USB_DIR_IN) {
> + if (usb_endpoint_dir_in(desc)) {
> u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
>
> if (hw_ep->is_shared_fifo)
> diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
> index 99fa612..a035cec 100644
> --- a/drivers/usb/musb/musb_host.c
> +++ b/drivers/usb/musb/musb_host.c
> @@ -1847,8 +1847,8 @@ static int musb_urb_enqueue(
> goto done;
> }
>
> - qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
> - qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
> + qh->epnum = usb_endpoint_num(epd);
> + qh->type = usb_endpoint_type(epd);
>
> /* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
> qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
balbi