2009-03-14 20:06:06

by Jing Huang

[permalink] [raw]
Subject: [PATCH 3/5] bfa: Brocade BFA FC SCSI driver (include)

From: Jing Huang <[email protected]>

This patch contains common header files for linux driver and
hardware/firmeare interface. It is created using 2.6.29-rc8 kernel.

Signed-off-by: Jing Huang <[email protected]>
---
aen/bfa_aen.h | 80 ++
aen/bfa_aen_adapter.h | 29
aen/bfa_aen_audit.h | 29
aen/bfa_aen_ethport.h | 31
aen/bfa_aen_ioc.h | 31
aen/bfa_aen_itnim.h | 30
aen/bfa_aen_lport.h | 39 +
aen/bfa_aen_port.h | 39 +
aen/bfa_aen_rport.h | 32
bfa.h | 198 +++++
bfa_diag.h | 184 +++++
bfa_fcpim.h | 21
bfa_svc.h | 258 +++++++
bfa_timer.h | 53 +
bfi/bfi.h | 185 +++++
bfi/bfi_boot.h | 34
bfi/bfi_cbreg.h | 303 ++++++++
bfi/bfi_cee.h | 119 +++
bfi/bfi_ctreg.h | 604 ++++++++++++++++
bfi/bfi_diag.h | 181 +++++
bfi/bfi_fabric.h | 112 +++
bfi/bfi_fcpim.h | 360 ++++++++++
bfi/bfi_fcxp.h | 71 +
bfi/bfi_ioc.h | 193 +++++
bfi/bfi_iocfc.h | 151 ++++
bfi/bfi_lport.h | 71 +
bfi/bfi_lps.h | 94 ++
bfi/bfi_pport.h | 184 +++++
bfi/bfi_rport.h | 177 ++++
bfi/bfi_uf.h | 52 +
bfi/bfi_vport.h | 67 +
cna/pstats/ethport_defs.h | 36 +
cna/pstats/phyport_defs.h | 212 +++++
cs/bfa_checksum.h | 60 +
cs/bfa_debug.h | 38 +
cs/bfa_ht.h | 174 ++++
cs/bfa_log.h | 183 +++++
cs/bfa_perf.h | 34
cs/bfa_plog.h | 161 ++++
cs/bfa_q.h | 96 ++
cs/bfa_sm.h | 69 +
cs/bfa_trc.h | 174 ++++
cs/bfa_wc.h | 68 +
defs/bfa_defs_adapter.h | 82 ++
defs/bfa_defs_aen.h | 72 ++
defs/bfa_defs_audit.h | 38 +
defs/bfa_defs_auth.h | 112 +++
defs/bfa_defs_boot.h | 68 +
defs/bfa_defs_cee.h | 132 +++
defs/bfa_defs_diag.h | 139 +++
defs/bfa_defs_driver.h | 40 +
defs/bfa_defs_ethport.h | 100 ++
defs/bfa_defs_im_common.h | 36 +
defs/bfa_defs_im_team.h | 78 ++
defs/bfa_defs_ioc.h | 149 ++++
defs/bfa_defs_iocfc.h | 314 ++++++++
defs/bfa_defs_ipfc.h | 70 +
defs/bfa_defs_itnim.h | 124 +++
defs/bfa_defs_itntm.h | 118 +++
defs/bfa_defs_led.h | 35
defs/bfa_defs_lport.h | 68 +
defs/bfa_defs_mfg.h | 58 +
defs/bfa_defs_pbind.h | 62 +
defs/bfa_defs_pci.h | 41 +
defs/bfa_defs_pm.h | 33
defs/bfa_defs_pom.h | 56 +
defs/bfa_defs_port.h | 234 ++++++
defs/bfa_defs_pport.h | 340 +++++++++
defs/bfa_defs_qos.h | 99 ++
defs/bfa_defs_rport.h | 199 +++++
defs/bfa_defs_status.h | 153 ++++
defs/bfa_defs_tsensor.h | 43 +
defs/bfa_defs_types.h | 30
defs/bfa_defs_version.h | 22
defs/bfa_defs_vf.h | 74 ++
defs/bfa_defs_vport.h | 91 ++
log/bfa_log_fcs.h | 28
log/bfa_log_hal.h | 28
log/bfa_log_linux.h | 44 +
log/bfa_log_wdrv.h | 36 +
protocol/fc.h | 1098 ++++++++++++++++++++++++++++++
protocol/fc_sp.h | 225 ++++++
protocol/fcp.h | 186 +++++
protocol/fdmi.h | 163 ++++
protocol/pcifw.h | 73 ++
protocol/scsi.h | 1644 ++++++++++++++++++++++++++++++++++++++++++++++
protocol/sfp.h | 467 +++++++++++++
protocol/types.h | 41 +
88 files changed, 12660 insertions(+)

diff -urpN orig/drivers/scsi/bfa/include/aen/bfa_aen_adapter.h patch/drivers/scsi/bfa/include/aen/bfa_aen_adapter.h
--- orig/drivers/scsi/bfa/include/aen/bfa_aen_adapter.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/aen/bfa_aen_adapter.h 2009-03-14 11:44:58.559831000 -0700
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_ADAPTER Module */
+#ifndef __bfa_aen_adapter_h__
+#define __bfa_aen_adapter_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_ADAPTER_ADD BFA_LOG_CREATE_ID(BFA_AEN_CAT_ADAPTER, BFA_ADAPTER_AEN_ADD)
+#define BFA_AEN_ADAPTER_REMOVE BFA_LOG_CREATE_ID(BFA_AEN_CAT_ADAPTER, BFA_ADAPTER_AEN_REMOVE)
+
+#endif
+
diff -urpN orig/drivers/scsi/bfa/include/aen/bfa_aen_audit.h patch/drivers/scsi/bfa/include/aen/bfa_aen_audit.h
--- orig/drivers/scsi/bfa/include/aen/bfa_aen_audit.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/aen/bfa_aen_audit.h 2009-03-14 11:44:58.566545000 -0700
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_AUDIT Module */
+#ifndef __bfa_aen_audit_h__
+#define __bfa_aen_audit_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_AUDIT_AUTH_ENABLE BFA_LOG_CREATE_ID(BFA_AEN_CAT_AUDIT, BFA_AUDIT_AEN_AUTH_ENABLE)
+#define BFA_AEN_AUDIT_AUTH_DISABLE BFA_LOG_CREATE_ID(BFA_AEN_CAT_AUDIT, BFA_AUDIT_AEN_AUTH_DISABLE)
+
+#endif
+
diff -urpN orig/drivers/scsi/bfa/include/aen/bfa_aen_ethport.h patch/drivers/scsi/bfa/include/aen/bfa_aen_ethport.h
--- orig/drivers/scsi/bfa/include/aen/bfa_aen_ethport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/aen/bfa_aen_ethport.h 2009-03-14 11:44:58.600225000 -0700
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_ETHPORT Module */
+#ifndef __bfa_aen_ethport_h__
+#define __bfa_aen_ethport_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_ETHPORT_LINKUP BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_LINKUP)
+#define BFA_AEN_ETHPORT_LINKDOWN BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_LINKDOWN)
+#define BFA_AEN_ETHPORT_ENABLE BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_ENABLE)
+#define BFA_AEN_ETHPORT_DISABLE BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_DISABLE)
+
+#endif
+
diff -urpN orig/drivers/scsi/bfa/include/aen/bfa_aen.h patch/drivers/scsi/bfa/include/aen/bfa_aen.h
--- orig/drivers/scsi/bfa/include/aen/bfa_aen.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/aen/bfa_aen.h 2009-03-14 11:44:58.546954000 -0700
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_AEN_H__
+#define __BFA_AEN_H__
+
+#include "defs/bfa_defs_aen.h"
+
+#define BFA_AEN_MAX_ENTRY 512
+
+extern s32 bfa_aen_max_cfg_entry;
+struct bfa_aen_s {
+ void *bfad;
+ s32 max_entry;
+ s32 write_index;
+ s32 read_index;
+ u32 bfad_num;
+ void (*aen_cb_notify)(void *bfad);
+ void (*gettimeofday)(struct bfa_timeval_s *tv);
+ struct bfa_trc_mod_s *trcmod;
+ struct bfa_aen_entry_s list[BFA_AEN_MAX_ENTRY]; /* Must be the last */
+};
+
+
+/**
+ * Public APIs
+ */
+static inline void
+bfa_aen_set_max_cfg_entry(int max_entry)
+{
+ bfa_aen_max_cfg_entry = max_entry;
+}
+
+static inline s32
+bfa_aen_get_max_cfg_entry(void)
+{
+ return bfa_aen_max_cfg_entry;
+}
+
+static inline s32
+bfa_aen_get_meminfo(void)
+{
+ return (sizeof(struct bfa_aen_entry_s) * bfa_aen_get_max_cfg_entry());
+}
+
+static inline s32
+bfa_aen_fetch_count(struct bfa_aen_s *aen)
+{
+ return ((aen->write_index + aen->max_entry) - aen->read_index)
+ % aen->max_entry;
+}
+
+s32 bfa_aen_init(struct bfa_aen_s *aen, struct bfa_trc_mod_s *trcmod,
+ void *bfad, u32 inst_id, void (*aen_cb_notify)(void *),
+ void (*gettimeofday)(struct bfa_timeval_s *));
+
+s32 bfa_aen_post(struct bfa_aen_s *aen, enum bfa_aen_category aen_category,
+ int aen_type, union bfa_aen_data_u *aen_data);
+
+s32 bfa_aen_fetch(struct bfa_aen_s *aen, struct bfa_aen_entry_s *aen_entry,
+ s32 entry_space);
+
+s32 bfa_aen_get_inst(struct bfa_aen_s *aen);
+
+char *wwn2str(char *buf, int bufsize, u64 wwn);
+
+#endif /* __BFA_AEN_H__ */
diff -urpN orig/drivers/scsi/bfa/include/aen/bfa_aen_ioc.h patch/drivers/scsi/bfa/include/aen/bfa_aen_ioc.h
--- orig/drivers/scsi/bfa/include/aen/bfa_aen_ioc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/aen/bfa_aen_ioc.h 2009-03-14 11:44:58.553313000 -0700
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_IOC Module */
+#ifndef __bfa_aen_ioc_h__
+#define __bfa_aen_ioc_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_IOC_HBGOOD BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_HBGOOD)
+#define BFA_AEN_IOC_HBFAIL BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_HBFAIL)
+#define BFA_AEN_IOC_ENABLE BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_ENABLE)
+#define BFA_AEN_IOC_DISABLE BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_DISABLE)
+
+#endif
+
diff -urpN orig/drivers/scsi/bfa/include/aen/bfa_aen_itnim.h patch/drivers/scsi/bfa/include/aen/bfa_aen_itnim.h
--- orig/drivers/scsi/bfa/include/aen/bfa_aen_itnim.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/aen/bfa_aen_itnim.h 2009-03-14 11:44:58.580439000 -0700
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_ITNIM Module */
+#ifndef __bfa_aen_itnim_h__
+#define __bfa_aen_itnim_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_ITNIM_ONLINE BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_ONLINE)
+#define BFA_AEN_ITNIM_OFFLINE BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_OFFLINE)
+#define BFA_AEN_ITNIM_DISCONNECT BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_DISCONNECT)
+
+#endif
+
diff -urpN orig/drivers/scsi/bfa/include/aen/bfa_aen_lport.h patch/drivers/scsi/bfa/include/aen/bfa_aen_lport.h
--- orig/drivers/scsi/bfa/include/aen/bfa_aen_lport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/aen/bfa_aen_lport.h 2009-03-14 11:44:58.573698000 -0700
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_LPORT Module */
+#ifndef __bfa_aen_lport_h__
+#define __bfa_aen_lport_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_LPORT_NEW BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW)
+#define BFA_AEN_LPORT_DELETE BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE)
+#define BFA_AEN_LPORT_ONLINE BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_ONLINE)
+#define BFA_AEN_LPORT_OFFLINE BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_OFFLINE)
+#define BFA_AEN_LPORT_DISCONNECT BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DISCONNECT)
+#define BFA_AEN_LPORT_NEW_PROP BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW_PROP)
+#define BFA_AEN_LPORT_DELETE_PROP BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE_PROP)
+#define BFA_AEN_LPORT_NEW_STANDARD BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW_STANDARD)
+#define BFA_AEN_LPORT_DELETE_STANDARD BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE_STANDARD)
+#define BFA_AEN_LPORT_NPIV_DUP_WWN BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_DUP_WWN)
+#define BFA_AEN_LPORT_NPIV_FABRIC_MAX BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_FABRIC_MAX)
+#define BFA_AEN_LPORT_NPIV_UNKNOWN BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_UNKNOWN)
+
+#endif
+
diff -urpN orig/drivers/scsi/bfa/include/aen/bfa_aen_port.h patch/drivers/scsi/bfa/include/aen/bfa_aen_port.h
--- orig/drivers/scsi/bfa/include/aen/bfa_aen_port.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/aen/bfa_aen_port.h 2009-03-14 11:44:58.593508000 -0700
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_PORT Module */
+#ifndef __bfa_aen_port_h__
+#define __bfa_aen_port_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_PORT_ONLINE BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_ONLINE)
+#define BFA_AEN_PORT_OFFLINE BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_OFFLINE)
+#define BFA_AEN_PORT_RLIR BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_RLIR)
+#define BFA_AEN_PORT_SFP_INSERT BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_INSERT)
+#define BFA_AEN_PORT_SFP_REMOVE BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_REMOVE)
+#define BFA_AEN_PORT_SFP_POM BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_POM)
+#define BFA_AEN_PORT_ENABLE BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_ENABLE)
+#define BFA_AEN_PORT_DISABLE BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_DISABLE)
+#define BFA_AEN_PORT_AUTH_ON BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_AUTH_ON)
+#define BFA_AEN_PORT_AUTH_OFF BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_AUTH_OFF)
+#define BFA_AEN_PORT_DISCONNECT BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_DISCONNECT)
+#define BFA_AEN_PORT_QOS_NEG BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_QOS_NEG)
+
+#endif
+
diff -urpN orig/drivers/scsi/bfa/include/aen/bfa_aen_rport.h patch/drivers/scsi/bfa/include/aen/bfa_aen_rport.h
--- orig/drivers/scsi/bfa/include/aen/bfa_aen_rport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/aen/bfa_aen_rport.h 2009-03-14 11:44:58.586969000 -0700
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_RPORT Module */
+#ifndef __bfa_aen_rport_h__
+#define __bfa_aen_rport_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_RPORT_ONLINE BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_ONLINE)
+#define BFA_AEN_RPORT_OFFLINE BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_OFFLINE)
+#define BFA_AEN_RPORT_DISCONNECT BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_DISCONNECT)
+#define BFA_AEN_RPORT_QOS_PRIO BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_QOS_PRIO)
+#define BFA_AEN_RPORT_QOS_FLOWID BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_QOS_FLOWID)
+
+#endif
+
diff -urpN orig/drivers/scsi/bfa/include/bfa_diag.h patch/drivers/scsi/bfa/include/bfa_diag.h
--- orig/drivers/scsi/bfa/include/bfa_diag.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfa_diag.h 2009-03-14 11:44:58.632085000 -0700
@@ -0,0 +1,184 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DIAG_H__
+#define __BFA_DIAG_H__
+
+#include <bfa.h>
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_diag.h>
+#include <bfi/bfi_diag.h>
+
+typedef void (*bfa_cb_diag_t) (void *cbarg, bfa_status_t status);
+
+/**
+ * DIAG data structure
+ */
+
+struct bfa_diag_qtest_s {
+ struct bfa_diag_qtest_result_s *result;
+ bfa_cb_diag_t cbfn;
+ void *cbarg;
+ struct bfa_timer_s timer;
+ u32 status;
+ u32 count;
+ u8 lock;
+ u8 queue;
+ u8 all; /* 1: test all queue */
+ u8 timer_active;
+};
+
+struct bfa_diag_fwping_s {
+ struct bfa_diag_fwping_result_s *result;
+ bfa_cb_diag_t cbfn;
+ void *cbarg;
+ u32 data;
+ u8 lock;
+ u8 rsv[3];
+ u32 status;
+ u32 count;
+ struct bfa_mbox_cmd_s mbcmd;
+};
+
+/*
+ * temp sensor has it's own cbfn cause it can co-exist with other diag cmd
+ */
+struct bfa_diag_tsensor_s {
+ bfa_cb_diag_t cbfn;
+ void *cbarg;
+ u16 *temp;
+ u8 lock;
+ u8 rsv[3];
+ u32 status;
+ struct bfa_mbox_cmd_s mbcmd;
+};
+
+struct bfa_diag_sfpshow_s {
+ sfp_mem_t *sfpmem;
+ bfa_cb_diag_t cbfn;
+ void *cbarg;
+ u8 lock;
+ u8 static_data;
+ u8 rsv[2];
+ u32 status;
+ struct bfa_mbox_cmd_s mbcmd;
+};
+
+struct bfa_diag_lb_s {
+ bfa_cb_diag_t cbfn;
+ void *cbarg;
+ void *result;
+ u8 lock;
+ u8 rsv[3];
+ u32 status;
+};
+
+struct bfa_diag_led_s {
+ struct bfa_mbox_cmd_s mbcmd;
+ bfa_boolean_t lock; /* 1: ledtest is operating */
+};
+
+struct bfa_diag_beacon_s {
+ struct bfa_mbox_cmd_s mbcmd;
+ bfa_boolean_t state; /* port beacon state */
+ bfa_boolean_t link_e2e; /* link beacon state */
+};
+
+struct bfa_diag_s {
+ struct bfa_s *bfa; /*! Back pointer to BFA */
+ struct bfa_ioc_s *ioc;
+ struct bfa_trc_mod_s *trcmod;
+ struct bfa_diag_qtest_s qtest;
+ struct bfa_diag_fwping_s fwping;
+ struct bfa_diag_tsensor_s tsensor;
+ struct bfa_diag_sfpshow_s sfpshow;
+ struct bfa_diag_lb_s lb;
+ struct bfa_diag_led_s ledtest;
+ struct bfa_diag_beacon_s beacon;
+ void *result; /* store result pointer */
+ struct bfa_timer_s timer;
+ u8 *dbuf_kva; /* dma buf virtual address */
+ u64 dbuf_pa; /* dma buf physical address */
+ bfa_cb_diag_t cbfn;
+ void *cbarg;
+ u8 block;
+ u8 timer_active;
+ u8 rsvd[2];
+ u32 status;
+ struct bfa_ioc_hbfail_notify_s hbfail_reg;
+};
+
+#define BFA_DIAG_MOD(__bfa) (&(__bfa)->modules.diag_mod)
+
+
+/*
+ * bfa hal diag API functions
+ */
+bfa_status_t bfa_diag_reg_read(struct bfa_s *bfa, u32 offset,
+ u32 len, u32 *buf);
+
+bfa_status_t bfa_diag_reg_write(struct bfa_s *bfa, u32 offset,
+ u32 len, u32 value);
+
+bfa_status_t bfa_diag_tsensor_query(struct bfa_diag_s *diag, u16 *temp,
+ bfa_cb_diag_t cbfn, void *cbarg);
+
+bfa_status_t bfa_diag_fwping(struct bfa_diag_s *diag, u32 cnt,
+ u32 pattern, struct bfa_diag_fwping_result_s *result,
+ bfa_cb_diag_t cbfn, void *cbarg);
+
+bfa_status_t bfa_diag_sfpshow(struct bfa_diag_s *diag, sfp_mem_t *sfpmem,
+ u8 static_data, bfa_cb_diag_t cbfn,
+ void *cbarg);
+
+bfa_status_t bfa_diag_loopback(struct bfa_diag_s *diag,
+ enum bfa_pport_opmode opmode,
+ enum bfa_pport_speed speed, u32 lpcnt,
+ u32 pat,
+ struct bfa_diag_loopback_result_s *result,
+ bfa_cb_diag_t cbfn, void *cbarg);
+
+bfa_status_t bfa_diag_memtest(struct bfa_diag_s *diag,
+ struct bfa_diag_memtest_s *memtest,
+ u32 pattern,
+ struct bfa_diag_memtest_result_s *result,
+ bfa_cb_diag_t cbfn, void *cbarg);
+
+bfa_status_t bfa_diag_ledtest(struct bfa_diag_s *diag,
+ struct bfa_diag_ledtest_s *ledtest);
+
+bfa_status_t bfa_diag_beacon_port(struct bfa_diag_s *diag,
+ bfa_boolean_t beacon,
+ bfa_boolean_t link_e2e_beacon,
+ u32 sec);
+
+bfa_status_t bfa_diag_queuetest(struct bfa_diag_s *diag, u32 ignore,
+ u32 queue, struct bfa_diag_qtest_result_s *result,
+ bfa_cb_diag_t cbfn, void *cbarg);
+
+/**
+ * New diag common interface -- TBD
+ */
+struct bfa_diag_mod;
+u32 __bfa_diag_meminfo(void);
+void __bfa_diag_attach(struct bfa_diag_s *diag, struct bfa_ioc_s *ioc, void *dev,
+ struct bfa_trc_mod_s *trcmod);
+void bfa_diag_memclaim(struct bfa_diag_s *diag, u8 *dm_kva, u64 dm_pa);
+void bfa_diag_intr(void *bfaarg, struct bfi_mbmsg_s *msg);
+
+#endif /* __BFA_DIAG_H__ */
diff -urpN orig/drivers/scsi/bfa/include/bfa_fcpim.h patch/drivers/scsi/bfa/include/bfa_fcpim.h
--- orig/drivers/scsi/bfa/include/bfa_fcpim.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfa_fcpim.h 2009-03-14 11:44:58.639037000 -0700
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * Contents moved to /src/bfa/include/bfa_fcpim.h header file
+ * We'll have one header file per module
+ */
diff -urpN orig/drivers/scsi/bfa/include/bfa.h patch/drivers/scsi/bfa/include/bfa.h
--- orig/drivers/scsi/bfa/include/bfa.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfa.h 2009-03-14 11:44:58.625075000 -0700
@@ -0,0 +1,198 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_H__
+#define __BFA_H__
+
+#include <bfa_os_inc.h>
+#include <cs/bfa_debug.h>
+#include <cs/bfa_q.h>
+#include <cs/bfa_trc.h>
+#include <cs/bfa_log.h>
+#include <cs/bfa_plog.h>
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_ioc.h>
+#include <defs/bfa_defs_iocfc.h>
+#include <aen/bfa_aen.h>
+#include <bfi/bfi.h>
+
+struct bfa_s;
+#include <bfa_intr_priv.h>
+
+/**
+ * BFA interrupt return enums
+ */
+enum bfa_isr_status {
+ BFA_ISR_NOTCLAIMED = 1, /* interrupt not ours */
+ BFA_ISR_CLAIMED_COMP = 2, /* claimed; completions pending */
+ BFA_ISR_CLAIMED_NO_COMP = 3, /* claimed; no completions */
+};
+
+struct bfa_pcidev_s;
+
+/**
+ * PCI devices supported by the current BFA
+ */
+struct bfa_pciid_s {
+ u16 device_id;
+ u16 vendor_id;
+};
+
+extern char bfa_version[];
+
+/**
+ * BFA Power Mgmt Commands
+ */
+enum bfa_pm_cmd {
+ BFA_PM_CTL_D0 = 0,
+ BFA_PM_CTL_D1 = 1,
+ BFA_PM_CTL_D2 = 2,
+ BFA_PM_CTL_D3 = 3,
+};
+
+/**
+ * BFA memory resources
+ */
+enum bfa_mem_type {
+ BFA_MEM_TYPE_KVA = 1, /*! Kernel Virtual Memory *(non-dma-able) */
+ BFA_MEM_TYPE_DMA = 2, /*! DMA-able memory */
+ BFA_MEM_TYPE_MAX = BFA_MEM_TYPE_DMA,
+};
+
+struct bfa_mem_elem_s {
+ enum bfa_mem_type mem_type; /* see enum bfa_mem_type */
+ u32 mem_len; /* Total Length in Bytes */
+ u8 *kva; /* kernel virtual address */
+ u64 dma; /* dma address if DMA memory */
+ u8 *kva_curp; /* kva allocation cursor */
+ u64 dma_curp; /* dma allocation cursor */
+};
+#define BFA_OS_STR_LEN 64
+struct bfa_driver_info_s {
+ u8 version[BFA_VERSION_LEN]; /* Driver Version */
+ u8 host_machine_name[BFA_OS_STR_LEN];
+ u8 host_os_name[BFA_OS_STR_LEN]; /* OS name and version */
+ u8 host_os_patch[BFA_OS_STR_LEN];/* patch or service pack */
+ u8 os_device_name[BFA_OS_STR_LEN]; /* Driver Device Name */
+};
+
+
+struct bfa_meminfo_s {
+ struct bfa_mem_elem_s meminfo[BFA_MEM_TYPE_MAX];
+};
+#define bfa_meminfo_kva(_m) \
+ (_m)->meminfo[BFA_MEM_TYPE_KVA - 1].kva_curp
+#define bfa_meminfo_dma_virt(_m) \
+ (_m)->meminfo[BFA_MEM_TYPE_DMA - 1].kva_curp
+#define bfa_meminfo_dma_phys(_m) \
+ (_m)->meminfo[BFA_MEM_TYPE_DMA - 1].dma_curp
+
+/**
+ * Generic Scatter Gather Element used by driver
+ */
+struct bfa_sge_s {
+ u32 sg_len;
+ void *sg_addr;
+};
+
+#define bfa_sge_to_be(__sge) do { \
+ ((u32 *)(__sge))[0] = bfa_os_htonl(((u32 *)(__sge))[0] ); \
+ ((u32 *)(__sge))[1] = bfa_os_htonl(((u32 *)(__sge))[1] ); \
+ ((u32 *)(__sge))[2] = bfa_os_htonl(((u32 *)(__sge))[2] ); \
+} while (0)
+
+
+/*
+ * bfa stats interfaces
+ */
+#define bfa_stats(_mod, _stats) (_mod)->stats._stats ++
+
+#define bfa_ioc_get_stats(__bfa, __ioc_stats) \
+ bfa_ioc_fetch_stats(&(__bfa)->ioc, __ioc_stats)
+#define bfa_ioc_clear_stats(__bfa) \
+ bfa_ioc_clr_stats(&(__bfa)->ioc)
+
+/*
+ * bfa API functions
+ */
+void bfa_get_pciids(struct bfa_pciid_s **pciids, int *npciids);
+void bfa_cfg_get_default(struct bfa_iocfc_cfg_s *cfg);
+void bfa_cfg_get_min(struct bfa_iocfc_cfg_s *cfg);
+void bfa_cfg_get_meminfo(struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo);
+void bfa_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo,
+ struct bfa_pcidev_s *pcidev);
+void bfa_init_trc(struct bfa_s *bfa, struct bfa_trc_mod_s *trcmod);
+void bfa_init_log(struct bfa_s *bfa, struct bfa_log_mod_s *logmod);
+void bfa_init_aen(struct bfa_s *bfa, struct bfa_aen_s *aen);
+void bfa_init_plog(struct bfa_s *bfa, struct bfa_plog_s *plog);
+void bfa_detach(struct bfa_s *bfa);
+void bfa_init(struct bfa_s *bfa);
+void bfa_start(struct bfa_s *bfa);
+void bfa_stop(struct bfa_s *bfa);
+void bfa_cb_init(void *bfad, bfa_status_t status);
+void bfa_cb_stop(void *bfad, bfa_status_t status);
+
+void bfa_msix_getvecs(struct bfa_s *bfa, u32 *msix_vecs_bmap,
+ u32 *num_vecs, u32 *max_vec_bit);
+enum bfa_isr_status bfa_intx(struct bfa_s *bfa);
+enum bfa_isr_status bfa_msix_reqq(struct bfa_s *bfa, int qid);
+enum bfa_isr_status bfa_msix_rspq(struct bfa_s *bfa, int qid);
+enum bfa_isr_status bfa_msix_lpu(struct bfa_s *bfa);
+enum bfa_isr_status bfa_msix_errint(struct bfa_s *bfa);
+void bfa_isr_enable(struct bfa_s *bfa);
+void bfa_isr_disable(struct bfa_s *bfa);
+
+void bfa_comp_deq(struct bfa_s *bfa, struct list_head *comp_q);
+void bfa_comp_process(struct bfa_s *bfa, struct list_head *comp_q);
+void bfa_comp_free(struct bfa_s *bfa, struct list_head *comp_q);
+
+typedef void (*bfa_cb_ioc_t) (void *cbarg, enum bfa_status status);
+void bfa_iocfc_get_attr(struct bfa_s *bfa, struct bfa_iocfc_attr_s *attr);
+bfa_status_t bfa_iocfc_get_stats(struct bfa_s *bfa,
+ struct bfa_iocfc_stats_s *stats,
+ bfa_cb_ioc_t cbfn, void *cbarg);
+bfa_status_t bfa_iocfc_clear_stats(struct bfa_s *bfa,
+ bfa_cb_ioc_t cbfn, void *cbarg);
+void bfa_get_attr(struct bfa_s *bfa, struct bfa_ioc_attr_s *ioc_attr);
+
+void bfa_adapter_get_attr(struct bfa_s *bfa,
+ struct bfa_adapter_attr_s *ad_attr);
+u64 bfa_adapter_get_id(struct bfa_s *bfa);
+
+bfa_status_t bfa_iocfc_israttr_set(struct bfa_s *bfa,
+ struct bfa_iocfc_intr_attr_s *attr);
+
+bfa_status_t bfa_iocfc_enable(struct bfa_s *bfa);
+void bfa_iocfc_disable(struct bfa_s *bfa);
+void bfa_ioc_auto_recover(bfa_boolean_t auto_recover);
+void bfa_cb_ioc_disable(void *bfad);
+void bfa_timer_tick(struct bfa_s *bfa);
+void bfa_driver_info_init(struct bfa_s *bfa, struct bfa_driver_info_s *driver_info);
+
+#define bfa_timer_start(_bfa, _timer, _timercb, _arg, _timeout) \
+ bfa_timer_begin(&(_bfa)->timer_mod, _timer, _timercb, _arg, _timeout)
+
+/*
+ * BFA debug API functions
+ */
+bfa_status_t bfa_debug_fwtrc(struct bfa_s *bfa, void *trcdata, int *trclen);
+bfa_status_t bfa_debug_fwsave(struct bfa_s *bfa, void *trcdata, int *trclen);
+
+#include "bfa_priv.h"
+
+#endif /* __BFA_H__ */
diff -urpN orig/drivers/scsi/bfa/include/bfa_svc.h patch/drivers/scsi/bfa/include/bfa_svc.h
--- orig/drivers/scsi/bfa/include/bfa_svc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfa_svc.h 2009-03-14 11:44:58.646789000 -0700
@@ -0,0 +1,258 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_SVC_H__
+#define __BFA_SVC_H__
+
+/*
+ * forward declarations
+ */
+struct bfa_fcxp_s;
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_pport.h>
+#include <defs/bfa_defs_rport.h>
+#include <defs/bfa_defs_qos.h>
+#include <cs/bfa_sm.h>
+#include <bfa.h>
+
+/**
+ * Send completion callback.
+ */
+typedef void (*bfa_cb_fcxp_send_t) (void *bfad_fcxp, struct bfa_fcxp_s *fcxp,
+ void *cbarg, enum bfa_status req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs);
+
+/**
+ * BFA fcxp allocation (asynchronous)
+ */
+typedef void (*bfa_fcxp_alloc_cbfn_t) (void *cbarg, struct bfa_fcxp_s *fcxp);
+
+struct bfa_fcxp_wqe_s {
+ struct list_head qe;
+ bfa_fcxp_alloc_cbfn_t alloc_cbfn;
+ void *alloc_cbarg;
+};
+
+typedef u64 (*bfa_fcxp_get_sgaddr_t) (void *bfad_fcxp, int sgeid);
+typedef u32 (*bfa_fcxp_get_sglen_t) (void *bfad_fcxp, int sgeid);
+
+#define BFA_UF_BUFSZ (2 * 1024 + 256)
+
+/**
+ * @todo private
+ */
+struct bfa_uf_buf_s {
+ u8 d[BFA_UF_BUFSZ];
+};
+
+
+struct bfa_uf_s {
+ struct list_head qe; /* queue element */
+ struct bfa_s *bfa; /* bfa instance */
+ u16 uf_tag; /* identifying tag f/w messages */
+ u16 vf_id;
+ u16 src_rport_handle;
+ u16 rsvd;
+ u8 *data_ptr;
+ u16 data_len; /* actual receive length */
+ u16 pb_len; /* posted buffer length */
+ void *buf_kva; /* buffer virtual address */
+ u64 buf_pa; /* buffer physical address */
+ struct bfa_cb_qe_s hcb_qe; /* comp: BFA comp qelem */
+ struct bfa_sge_s sges[BFI_SGE_INLINE_MAX];
+};
+
+typedef void (*bfa_cb_pport_t) (void *cbarg, enum bfa_status status);
+
+/**
+ * bfa lport login/logout service interface
+ */
+struct bfa_lps_s {
+ struct list_head qe; /* queue element */
+ struct bfa_s *bfa; /* parent bfa instance */
+ bfa_sm_t sm; /* finite state machine */
+ u8 lp_tag; /* lport tag */
+ u8 reqq; /* lport request queue */
+ u8 alpa; /* ALPA for loop topologies */
+ u32 lp_pid; /* lport port ID */
+ bfa_boolean_t fdisc; /* send FDISC instead of FLOGI*/
+ bfa_boolean_t auth_en; /* enable authentication */
+ bfa_boolean_t auth_req; /* authentication required */
+ bfa_boolean_t npiv_en; /* NPIV is allowed by peer */
+ bfa_boolean_t fport; /* attached peer is F_PORT */
+ bfa_status_t status; /* login status */
+ u16 pdusz; /* max receive PDU size */
+ u16 pr_bbcred; /* BB_CREDIT from peer */
+ u8 lsrjt_rsn; /* LSRJT reason */
+ u8 lsrjt_expl; /* LSRJT explanation */
+ wwn_t pwwn; /* port wwn of lport */
+ wwn_t nwwn; /* node wwn of lport */
+ wwn_t pr_pwwn; /* port wwn of lport peer */
+ wwn_t pr_nwwn; /* node wwn of lport peer */
+ mac_t lp_mac; /* fpma/spma MAC for lport */
+ mac_t fcf_mac; /* FCF MAC of lport */
+ struct bfa_reqq_wait_s wqe; /* request wait queue element */
+ void *uarg; /* user callback arg */
+ struct bfa_cb_qe_s hcb_qe; /* comp: callback qelem */
+ struct bfi_lps_login_rsp_s *loginrsp;
+};
+
+/*
+ * bfa pport API functions
+ */
+bfa_status_t bfa_pport_enable(struct bfa_s *bfa);
+bfa_status_t bfa_pport_disable(struct bfa_s *bfa);
+bfa_status_t bfa_pport_cfg_speed(struct bfa_s *bfa,
+ enum bfa_pport_speed speed);
+enum bfa_pport_speed bfa_pport_get_speed(struct bfa_s *bfa);
+bfa_status_t bfa_pport_cfg_topology(struct bfa_s *bfa,
+ enum bfa_pport_topology topo);
+enum bfa_pport_topology bfa_pport_get_topology(struct bfa_s *bfa);
+bfa_status_t bfa_pport_cfg_hardalpa(struct bfa_s *bfa, u8 alpa);
+bfa_boolean_t bfa_pport_get_hardalpa(struct bfa_s *bfa, u8 *alpa);
+u8 bfa_pport_get_myalpa(struct bfa_s *bfa);
+bfa_status_t bfa_pport_clr_hardalpa(struct bfa_s *bfa);
+bfa_status_t bfa_pport_cfg_maxfrsize(struct bfa_s *bfa, u16 maxsize);
+u16 bfa_pport_get_maxfrsize(struct bfa_s *bfa);
+u32 bfa_pport_mypid(struct bfa_s *bfa);
+u8 bfa_pport_get_rx_bbcredit(struct bfa_s *bfa);
+bfa_status_t bfa_pport_trunk_enable(struct bfa_s *bfa, u8 bitmap);
+bfa_status_t bfa_pport_trunk_disable(struct bfa_s *bfa);
+bfa_boolean_t bfa_pport_trunk_query(struct bfa_s *bfa, u32 *bitmap);
+void bfa_pport_get_attr(struct bfa_s *bfa, struct bfa_pport_attr_s *attr);
+wwn_t bfa_pport_get_wwn(struct bfa_s *bfa, bfa_boolean_t node);
+bfa_status_t bfa_pport_get_stats(struct bfa_s *bfa,
+ struct bfa_pport_stats_s *stats,
+ bfa_cb_pport_t cbfn, void *cbarg);
+bfa_status_t bfa_pport_clear_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn,
+ void *cbarg);
+void bfa_pport_event_register(struct bfa_s *bfa,
+ void (*event_cbfn) (void *cbarg,
+ bfa_pport_event_t event), void *event_cbarg);
+bfa_boolean_t bfa_pport_is_disabled(struct bfa_s *bfa);
+void bfa_pport_cfg_qos(struct bfa_s *bfa, bfa_boolean_t on_off);
+void bfa_pport_cfg_ratelim(struct bfa_s *bfa, bfa_boolean_t on_off);
+bfa_status_t bfa_pport_cfg_ratelim_speed(struct bfa_s *bfa,
+ enum bfa_pport_speed speed);
+enum bfa_pport_speed bfa_pport_get_ratelim_speed(struct bfa_s *bfa);
+
+void bfa_pport_set_tx_bbcredit(struct bfa_s *bfa, u16 tx_bbcredit);
+void bfa_pport_busy(struct bfa_s *bfa, bfa_boolean_t status);
+void bfa_pport_beacon(struct bfa_s *bfa, bfa_boolean_t beacon,
+ bfa_boolean_t link_e2e_beacon);
+void bfa_cb_pport_event(void *cbarg, bfa_pport_event_t event);
+void bfa_pport_qos_get_attr(struct bfa_s *bfa, struct bfa_qos_attr_s *qos_attr);
+void bfa_pport_qos_get_vc_attr(struct bfa_s *bfa,
+ struct bfa_qos_vc_attr_s *qos_vc_attr);
+bfa_status_t bfa_pport_get_qos_stats(struct bfa_s *bfa,
+ struct bfa_pport_stats_s *stats,
+ bfa_cb_pport_t cbfn, void *cbarg);
+bfa_status_t bfa_pport_clear_qos_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn,
+ void *cbarg);
+bfa_boolean_t bfa_pport_is_ratelim(struct bfa_s *bfa);
+
+/*
+ * bfa fcxp API functions
+ */
+struct bfa_fcxp_s *bfa_fcxp_alloc(void *bfad_fcxp, struct bfa_s *bfa,
+ int nreq_sgles, int nrsp_sgles,
+ bfa_fcxp_get_sgaddr_t get_req_sga,
+ bfa_fcxp_get_sglen_t get_req_sglen,
+ bfa_fcxp_get_sgaddr_t get_rsp_sga,
+ bfa_fcxp_get_sglen_t get_rsp_sglen);
+void bfa_fcxp_alloc_wait(struct bfa_s *bfa, struct bfa_fcxp_wqe_s *wqe,
+ bfa_fcxp_alloc_cbfn_t alloc_cbfn, void *cbarg);
+void bfa_fcxp_walloc_cancel(struct bfa_s *bfa,
+ struct bfa_fcxp_wqe_s *wqe);
+void bfa_fcxp_discard(struct bfa_fcxp_s *fcxp);
+
+void *bfa_fcxp_get_reqbuf(struct bfa_fcxp_s *fcxp);
+void *bfa_fcxp_get_rspbuf(struct bfa_fcxp_s *fcxp);
+
+void bfa_fcxp_free(struct bfa_fcxp_s *fcxp);
+#include <bfa_rport.h>
+void bfa_fcxp_send(struct bfa_fcxp_s *fcxp,
+ struct bfa_rport_s *rport, u16 vf_id,
+ bfa_boolean_t cts, fc_cos_t cos,
+ u32 reqlen, fchs_t *fchs,
+ bfa_cb_fcxp_send_t cbfn,
+ void *cbarg,
+ u32 rsp_maxlen, u8 rsp_timeout);
+bfa_status_t bfa_fcxp_abort(struct bfa_fcxp_s *fcxp);
+u32 bfa_fcxp_get_reqbufsz(struct bfa_fcxp_s *fcxp);
+u32 bfa_fcxp_get_maxrsp(struct bfa_s *bfa);
+
+static inline void *
+bfa_uf_get_frmbuf(struct bfa_uf_s *uf)
+{
+ return uf->data_ptr;
+}
+
+static inline u16
+bfa_uf_get_frmlen(struct bfa_uf_s *uf)
+{
+ return uf->data_len;
+}
+
+/**
+ * Callback prototype for unsolicited frame receive handler.
+ *
+ * @param[in] cbarg callback arg for receive handler
+ * @param[in] uf unsolicited frame descriptor
+ *
+ * @return None
+ */
+typedef void (*bfa_cb_uf_recv_t) (void *cbarg, struct bfa_uf_s *uf);
+
+/*
+ * bfa uf API functions
+ */
+void bfa_uf_recv_register(struct bfa_s *bfa, bfa_cb_uf_recv_t ufrecv,
+ void *cbarg);
+void bfa_uf_free(struct bfa_uf_s *uf);
+
+/**
+ * bfa lport service api
+ */
+
+struct bfa_lps_s *bfa_lps_alloc(struct bfa_s *bfa);
+void bfa_lps_delete(struct bfa_lps_s *lps);
+void bfa_lps_discard(struct bfa_lps_s *lps);
+void bfa_lps_flogi(struct bfa_lps_s *lps, void *uarg, u8 alpa, u16 pdusz,
+ wwn_t pwwn, wwn_t nwwn, bfa_boolean_t auth_en);
+void bfa_lps_fdisc(struct bfa_lps_s *lps, void *uarg, u16 pdusz, wwn_t pwwn,
+ wwn_t nwwn);
+void bfa_lps_flogo(struct bfa_lps_s *lps);
+void bfa_lps_fdisclogo(struct bfa_lps_s *lps);
+u8 bfa_lps_get_tag(struct bfa_lps_s *lps);
+bfa_boolean_t bfa_lps_is_npiv_en(struct bfa_lps_s *lps);
+bfa_boolean_t bfa_lps_is_fport(struct bfa_lps_s *lps);
+bfa_boolean_t bfa_lps_is_authreq(struct bfa_lps_s *lps);
+u32 bfa_lps_get_pid(struct bfa_lps_s *lps);
+u16 bfa_lps_get_peer_bbcredit(struct bfa_lps_s *lps);
+wwn_t bfa_lps_get_peer_pwwn(struct bfa_lps_s *lps);
+wwn_t bfa_lps_get_peer_nwwn(struct bfa_lps_s *lps);
+u8 bfa_lps_get_lsrjt_rsn(struct bfa_lps_s *lps);
+u8 bfa_lps_get_lsrjt_expl(struct bfa_lps_s *lps);
+void bfa_cb_lps_flogi_comp(void *bfad, void *uarg, bfa_status_t status);
+void bfa_cb_lps_flogo_comp(void *bfad, void *uarg);
+void bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status);
+void bfa_cb_lps_fdisclogo_comp(void *bfad, void *uarg);
+
+#endif /* __BFA_SVC_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/bfa_timer.h patch/drivers/scsi/bfa/include/bfa_timer.h
--- orig/drivers/scsi/bfa/include/bfa_timer.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfa_timer.h 2009-03-14 11:44:58.653778000 -0700
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_TIMER_H__
+#define __BFA_TIMER_H__
+
+#include <bfa_os_inc.h>
+#include <cs/bfa_q.h>
+
+struct bfa_s;
+
+typedef void (*bfa_timer_cbfn_t)(void *);
+
+/**
+ * BFA timer data structure
+ */
+struct bfa_timer_s {
+ struct list_head qe;
+ bfa_timer_cbfn_t timercb;
+ void *arg;
+ int timeout; /**< in millisecs. */
+};
+
+/**
+ * Timer module structure
+ */
+struct bfa_timer_mod_s {
+ struct list_head timer_q;
+};
+
+#define BFA_TIMER_FREQ 500 /**< specified in millisecs */
+
+void bfa_timer_beat(struct bfa_timer_mod_s *mod);
+void bfa_timer_init(struct bfa_timer_mod_s *mod);
+void bfa_timer_begin(struct bfa_timer_mod_s *mod, struct bfa_timer_s *timer,
+ bfa_timer_cbfn_t timercb, void *arg,
+ unsigned int timeout);
+void bfa_timer_stop(struct bfa_timer_s *timer);
+
+#endif /* __BFA_TIMER_H__ */
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_boot.h patch/drivers/scsi/bfa/include/bfi/bfi_boot.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_boot.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_boot.h 2009-03-14 11:44:58.394206000 -0700
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+/*
+ * bfi_boot.h
+ */
+
+#ifndef __BFI_BOOT_H__
+#define __BFI_BOOT_H__
+
+#define BFI_BOOT_TYPE_OFF 8
+#define BFI_BOOT_PARAM_OFF 12
+
+#define BFI_BOOT_TYPE_NORMAL 0 /* param is device id */
+#define BFI_BOOT_TYPE_FLASH 1
+#define BFI_BOOT_TYPE_MEMTEST 2
+
+#define BFI_BOOT_MEMTEST_RES_ADDR 0x900
+#define BFI_BOOT_MEMTEST_RES_SIG 0xA0A1A2A3
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_cbreg.h patch/drivers/scsi/bfa/include/bfi/bfi_cbreg.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_cbreg.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_cbreg.h 2009-03-14 11:44:58.402026000 -0700
@@ -0,0 +1,303 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * bfi_cbreg.h crossbow host block register definitions
+ *
+ * !!! Do not edit. Auto generated. !!!
+ */
+
+#ifndef __BFI_CBREG_H__
+#define __BFI_CBREG_H__
+
+
+#define HOSTFN0_INT_STATUS 0x00014000
+#define __HOSTFN0_INT_STATUS_LVL_MK 0x00f00000
+#define __HOSTFN0_INT_STATUS_LVL_SH 20
+#define __HOSTFN0_INT_STATUS_LVL(_v) ((_v) << __HOSTFN0_INT_STATUS_LVL_SH)
+#define __HOSTFN0_INT_STATUS_P 0x000fffff
+#define HOSTFN0_INT_MSK 0x00014004
+#define HOST_PAGE_NUM_FN0 0x00014008
+#define __HOST_PAGE_NUM_FN 0x000001ff
+#define HOSTFN1_INT_STATUS 0x00014100
+#define __HOSTFN1_INT_STAT_LVL_MK 0x00f00000
+#define __HOSTFN1_INT_STAT_LVL_SH 20
+#define __HOSTFN1_INT_STAT_LVL(_v) ((_v) << __HOSTFN1_INT_STAT_LVL_SH)
+#define __HOSTFN1_INT_STAT_P 0x000fffff
+#define HOSTFN1_INT_MSK 0x00014104
+#define HOST_PAGE_NUM_FN1 0x00014108
+#define APP_PLL_400_CTL_REG 0x00014204
+#define __P_400_PLL_LOCK 0x80000000
+#define __APP_PLL_400_SRAM_USE_100MHZ 0x00100000
+#define __APP_PLL_400_RESET_TIMER_MK 0x000e0000
+#define __APP_PLL_400_RESET_TIMER_SH 17
+#define __APP_PLL_400_RESET_TIMER(_v) ((_v) << __APP_PLL_400_RESET_TIMER_SH)
+#define __APP_PLL_400_LOGIC_SOFT_RESET 0x00010000
+#define __APP_PLL_400_CNTLMT0_1_MK 0x0000c000
+#define __APP_PLL_400_CNTLMT0_1_SH 14
+#define __APP_PLL_400_CNTLMT0_1(_v) ((_v) << __APP_PLL_400_CNTLMT0_1_SH)
+#define __APP_PLL_400_JITLMT0_1_MK 0x00003000
+#define __APP_PLL_400_JITLMT0_1_SH 12
+#define __APP_PLL_400_JITLMT0_1(_v) ((_v) << __APP_PLL_400_JITLMT0_1_SH)
+#define __APP_PLL_400_HREF 0x00000800
+#define __APP_PLL_400_HDIV 0x00000400
+#define __APP_PLL_400_P0_1_MK 0x00000300
+#define __APP_PLL_400_P0_1_SH 8
+#define __APP_PLL_400_P0_1(_v) ((_v) << __APP_PLL_400_P0_1_SH)
+#define __APP_PLL_400_Z0_2_MK 0x000000e0
+#define __APP_PLL_400_Z0_2_SH 5
+#define __APP_PLL_400_Z0_2(_v) ((_v) << __APP_PLL_400_Z0_2_SH)
+#define __APP_PLL_400_RSEL200500 0x00000010
+#define __APP_PLL_400_ENARST 0x00000008
+#define __APP_PLL_400_BYPASS 0x00000004
+#define __APP_PLL_400_LRESETN 0x00000002
+#define __APP_PLL_400_ENABLE 0x00000001
+#define APP_PLL_212_CTL_REG 0x00014208
+#define __P_212_PLL_LOCK 0x80000000
+#define __APP_PLL_212_RESET_TIMER_MK 0x000e0000
+#define __APP_PLL_212_RESET_TIMER_SH 17
+#define __APP_PLL_212_RESET_TIMER(_v) ((_v) << __APP_PLL_212_RESET_TIMER_SH)
+#define __APP_PLL_212_LOGIC_SOFT_RESET 0x00010000
+#define __APP_PLL_212_CNTLMT0_1_MK 0x0000c000
+#define __APP_PLL_212_CNTLMT0_1_SH 14
+#define __APP_PLL_212_CNTLMT0_1(_v) ((_v) << __APP_PLL_212_CNTLMT0_1_SH)
+#define __APP_PLL_212_JITLMT0_1_MK 0x00003000
+#define __APP_PLL_212_JITLMT0_1_SH 12
+#define __APP_PLL_212_JITLMT0_1(_v) ((_v) << __APP_PLL_212_JITLMT0_1_SH)
+#define __APP_PLL_212_HREF 0x00000800
+#define __APP_PLL_212_HDIV 0x00000400
+#define __APP_PLL_212_P0_1_MK 0x00000300
+#define __APP_PLL_212_P0_1_SH 8
+#define __APP_PLL_212_P0_1(_v) ((_v) << __APP_PLL_212_P0_1_SH)
+#define __APP_PLL_212_Z0_2_MK 0x000000e0
+#define __APP_PLL_212_Z0_2_SH 5
+#define __APP_PLL_212_Z0_2(_v) ((_v) << __APP_PLL_212_Z0_2_SH)
+#define __APP_PLL_212_RSEL200500 0x00000010
+#define __APP_PLL_212_ENARST 0x00000008
+#define __APP_PLL_212_BYPASS 0x00000004
+#define __APP_PLL_212_LRESETN 0x00000002
+#define __APP_PLL_212_ENABLE 0x00000001
+#define HOST_SEM0_REG 0x00014230
+#define __HOST_SEMAPHORE 0x00000001
+#define HOST_SEM1_REG 0x00014234
+#define HOST_SEM2_REG 0x00014238
+#define HOST_SEM3_REG 0x0001423c
+#define HOST_SEM0_INFO_REG 0x00014240
+#define HOST_SEM1_INFO_REG 0x00014244
+#define HOST_SEM2_INFO_REG 0x00014248
+#define HOST_SEM3_INFO_REG 0x0001424c
+#define HOSTFN0_LPU0_CMD_STAT 0x00019000
+#define __HOSTFN0_LPU0_MBOX_INFO_MK 0xfffffffe
+#define __HOSTFN0_LPU0_MBOX_INFO_SH 1
+#define __HOSTFN0_LPU0_MBOX_INFO(_v) ((_v) << __HOSTFN0_LPU0_MBOX_INFO_SH)
+#define __HOSTFN0_LPU0_MBOX_CMD_STATUS 0x00000001
+#define LPU0_HOSTFN0_CMD_STAT 0x00019008
+#define __LPU0_HOSTFN0_MBOX_INFO_MK 0xfffffffe
+#define __LPU0_HOSTFN0_MBOX_INFO_SH 1
+#define __LPU0_HOSTFN0_MBOX_INFO(_v) ((_v) << __LPU0_HOSTFN0_MBOX_INFO_SH)
+#define __LPU0_HOSTFN0_MBOX_CMD_STATUS 0x00000001
+#define HOSTFN1_LPU1_CMD_STAT 0x00019014
+#define __HOSTFN1_LPU1_MBOX_INFO_MK 0xfffffffe
+#define __HOSTFN1_LPU1_MBOX_INFO_SH 1
+#define __HOSTFN1_LPU1_MBOX_INFO(_v) ((_v) << __HOSTFN1_LPU1_MBOX_INFO_SH)
+#define __HOSTFN1_LPU1_MBOX_CMD_STATUS 0x00000001
+#define LPU1_HOSTFN1_CMD_STAT 0x0001901c
+#define __LPU1_HOSTFN1_MBOX_INFO_MK 0xfffffffe
+#define __LPU1_HOSTFN1_MBOX_INFO_SH 1
+#define __LPU1_HOSTFN1_MBOX_INFO(_v) ((_v) << __LPU1_HOSTFN1_MBOX_INFO_SH)
+#define __LPU1_HOSTFN1_MBOX_CMD_STATUS 0x00000001
+#define CPE_Q0_DEPTH 0x00010014
+#define CPE_Q0_PI 0x0001001c
+#define CPE_Q0_CI 0x00010020
+#define CPE_Q1_DEPTH 0x00010034
+#define CPE_Q1_PI 0x0001003c
+#define CPE_Q1_CI 0x00010040
+#define CPE_Q2_DEPTH 0x00010054
+#define CPE_Q2_PI 0x0001005c
+#define CPE_Q2_CI 0x00010060
+#define CPE_Q3_DEPTH 0x00010074
+#define CPE_Q3_PI 0x0001007c
+#define CPE_Q3_CI 0x00010080
+#define CPE_Q4_DEPTH 0x00010094
+#define CPE_Q4_PI 0x0001009c
+#define CPE_Q4_CI 0x000100a0
+#define CPE_Q5_DEPTH 0x000100b4
+#define CPE_Q5_PI 0x000100bc
+#define CPE_Q5_CI 0x000100c0
+#define CPE_Q6_DEPTH 0x000100d4
+#define CPE_Q6_PI 0x000100dc
+#define CPE_Q6_CI 0x000100e0
+#define CPE_Q7_DEPTH 0x000100f4
+#define CPE_Q7_PI 0x000100fc
+#define CPE_Q7_CI 0x00010100
+#define RME_Q0_DEPTH 0x00011014
+#define RME_Q0_PI 0x0001101c
+#define RME_Q0_CI 0x00011020
+#define RME_Q1_DEPTH 0x00011034
+#define RME_Q1_PI 0x0001103c
+#define RME_Q1_CI 0x00011040
+#define RME_Q2_DEPTH 0x00011054
+#define RME_Q2_PI 0x0001105c
+#define RME_Q2_CI 0x00011060
+#define RME_Q3_DEPTH 0x00011074
+#define RME_Q3_PI 0x0001107c
+#define RME_Q3_CI 0x00011080
+#define RME_Q4_DEPTH 0x00011094
+#define RME_Q4_PI 0x0001109c
+#define RME_Q4_CI 0x000110a0
+#define RME_Q5_DEPTH 0x000110b4
+#define RME_Q5_PI 0x000110bc
+#define RME_Q5_CI 0x000110c0
+#define RME_Q6_DEPTH 0x000110d4
+#define RME_Q6_PI 0x000110dc
+#define RME_Q6_CI 0x000110e0
+#define RME_Q7_DEPTH 0x000110f4
+#define RME_Q7_PI 0x000110fc
+#define RME_Q7_CI 0x00011100
+#define PSS_CTL_REG 0x00018800
+#define __PSS_I2C_CLK_DIV_MK 0x00030000
+#define __PSS_I2C_CLK_DIV_SH 16
+#define __PSS_I2C_CLK_DIV(_v) ((_v) << __PSS_I2C_CLK_DIV_SH)
+#define __PSS_LMEM_INIT_DONE 0x00001000
+#define __PSS_LMEM_RESET 0x00000200
+#define __PSS_LMEM_INIT_EN 0x00000100
+#define __PSS_LPU1_RESET 0x00000002
+#define __PSS_LPU0_RESET 0x00000001
+
+
+/*
+ * These definitions are either in error/missing in spec. Its auto-generated
+ * from hard coded values in regparse.pl.
+ */
+#define __EMPHPOST_AT_4G_MK_FIX 0x0000001c
+#define __EMPHPOST_AT_4G_SH_FIX 0x00000002
+#define __EMPHPRE_AT_4G_FIX 0x00000003
+#define __SFP_TXRATE_EN_FIX 0x00000100
+#define __SFP_RXRATE_EN_FIX 0x00000080
+
+
+/*
+ * These register definitions are auto-generated from hard coded values
+ * in regparse.pl.
+ */
+#define HOSTFN0_LPU_MBOX0_0 0x00019200
+#define HOSTFN1_LPU_MBOX0_8 0x00019260
+#define LPU_HOSTFN0_MBOX0_0 0x00019280
+#define LPU_HOSTFN1_MBOX0_8 0x000192e0
+
+
+/*
+ * These register mapping definitions are auto-generated from mapping tables
+ * in regparse.pl.
+ */
+#define BFA_IOC0_HBEAT_REG HOST_SEM0_INFO_REG
+#define BFA_IOC0_STATE_REG HOST_SEM1_INFO_REG
+#define BFA_IOC1_HBEAT_REG HOST_SEM2_INFO_REG
+#define BFA_IOC1_STATE_REG HOST_SEM3_INFO_REG
+
+#define CPE_Q_DEPTH(__n) \
+ (CPE_Q0_DEPTH + (__n) * (CPE_Q1_DEPTH - CPE_Q0_DEPTH))
+#define CPE_Q_PI(__n) \
+ (CPE_Q0_PI + (__n) * (CPE_Q1_PI - CPE_Q0_PI))
+#define CPE_Q_CI(__n) \
+ (CPE_Q0_CI + (__n) * (CPE_Q1_CI - CPE_Q0_CI))
+#define RME_Q_DEPTH(__n) \
+ (RME_Q0_DEPTH + (__n) * (RME_Q1_DEPTH - RME_Q0_DEPTH))
+#define RME_Q_PI(__n) \
+ (RME_Q0_PI + (__n) * (RME_Q1_PI - RME_Q0_PI))
+#define RME_Q_CI(__n) \
+ (RME_Q0_CI + (__n) * (RME_Q1_CI - RME_Q0_CI))
+
+#define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
+#define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
+#define CPE_Q_MASK(__q) ((__q) & 0x3)
+#define RME_Q_MASK(__q) ((__q) & 0x3)
+
+
+/*
+ * PCI MSI-X vector defines
+ */
+enum {
+ HFN_MSIX_CPE_Q0 = 0,
+ HFN_MSIX_CPE_Q1 = 1,
+ HFN_MSIX_CPE_Q2 = 2,
+ HFN_MSIX_CPE_Q3 = 3,
+ HFN_MSIX_CPE_Q4 = 4,
+ HFN_MSIX_CPE_Q5 = 5,
+ HFN_MSIX_CPE_Q6 = 6,
+ HFN_MSIX_CPE_Q7 = 7,
+ HFN_MSIX_RME_Q0 = 8,
+ HFN_MSIX_RME_Q1 = 9,
+ HFN_MSIX_RME_Q2 = 10,
+ HFN_MSIX_RME_Q3 = 11,
+ HFN_MSIX_RME_Q4 = 12,
+ HFN_MSIX_RME_Q5 = 13,
+ HFN_MSIX_RME_Q6 = 14,
+ HFN_MSIX_RME_Q7 = 15,
+ HFN_MSIX_ERR_EMC = 16,
+ HFN_MSIX_ERR_LPU0 = 17,
+ HFN_MSIX_ERR_LPU1 = 18,
+ HFN_MSIX_ERR_PSS = 19,
+ HFN_MSIX_MBOX_LPU0 = 20,
+ HFN_MSIX_MBOX_LPU1 = 21,
+ HFN_MSIX_GP_LPU0 = 22,
+ HFN_MSIX_GP_LPU1 = 23,
+};
+
+/*
+ * And corresponding host interrupt status bit field defines
+ */
+#define __HFN_INT_CPE_Q0 0x00000001U
+#define __HFN_INT_CPE_Q1 0x00000002U
+#define __HFN_INT_CPE_Q2 0x00000004U
+#define __HFN_INT_CPE_Q3 0x00000008U
+#define __HFN_INT_CPE_Q4 0x00000010U
+#define __HFN_INT_CPE_Q5 0x00000020U
+#define __HFN_INT_CPE_Q6 0x00000040U
+#define __HFN_INT_CPE_Q7 0x00000080U
+#define __HFN_INT_RME_Q0 0x00000100U
+#define __HFN_INT_RME_Q1 0x00000200U
+#define __HFN_INT_RME_Q2 0x00000400U
+#define __HFN_INT_RME_Q3 0x00000800U
+#define __HFN_INT_RME_Q4 0x00001000U
+#define __HFN_INT_RME_Q5 0x00002000U
+#define __HFN_INT_RME_Q6 0x00004000U
+#define __HFN_INT_RME_Q7 0x00008000U
+#define __HFN_INT_ERR_EMC 0x00010000U
+#define __HFN_INT_ERR_LPU0 0x00020000U
+#define __HFN_INT_ERR_LPU1 0x00040000U
+#define __HFN_INT_ERR_PSS 0x00080000U
+#define __HFN_INT_MBOX_LPU0 0x00100000U
+#define __HFN_INT_MBOX_LPU1 0x00200000U
+#define __HFN_INT_GP_LPU0 0x00400000U
+#define __HFN_INT_GP_LPU1 0x00800000U
+
+
+/*
+ * crossbow memory map.
+ */
+#define PSS_SMEM_PAGE_START 0x8000
+#define PSS_SMEM_PGNUM(_pg0, _ma) ((_pg0) + ((_ma) >> 15))
+#define PSS_SMEM_PGOFF(_ma) ((_ma) & 0x7fff)
+
+/*
+ * End of crossbow memory map
+ */
+
+
+#endif /* __BFI_CBREG_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_cee.h patch/drivers/scsi/bfa/include/bfi/bfi_cee.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_cee.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_cee.h 2009-03-14 11:44:58.473975000 -0700
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+/**
+ * Copyright (c) 2006-2009 Brocade Communications Systems, Inc.
+ * All rights reserved.
+ *
+ * bfi_dcbx.h BFI Interface (Mailbox commands and related structures)
+ * between host driver and DCBX/LLDP firmware module.
+ *
+**/
+
+#ifndef __BFI_CEE_H__
+#define __BFI_CEE_H__
+
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+
+enum bfi_cee_h2i_msgs_e {
+ BFI_CEE_H2I_GET_CFG_REQ = 1,
+ BFI_CEE_H2I_RESET_STATS = 2,
+ BFI_CEE_H2I_GET_STATS_REQ = 3,
+};
+
+
+enum bfi_cee_i2h_msgs_e {
+ BFI_CEE_I2H_GET_CFG_RSP = BFA_I2HM(1),
+ BFI_CEE_I2H_RESET_STATS_RSP = BFA_I2HM(2),
+ BFI_CEE_I2H_GET_STATS_RSP = BFA_I2HM(3),
+};
+
+
+/* Data structures */
+
+/*
+ * BFI_CEE_H2I_RESET_STATS
+ */
+struct bfi_lldp_reset_stats_s {
+ struct bfi_mhdr_s mh;
+};
+
+/*
+ * BFI_CEE_H2I_RESET_STATS
+ */
+struct bfi_cee_reset_stats_s {
+ struct bfi_mhdr_s mh;
+};
+
+/*
+ * BFI_CEE_H2I_GET_CFG_REQ
+ */
+struct bfi_cee_get_req_s {
+ struct bfi_mhdr_s mh;
+ union bfi_addr_u dma_addr;
+};
+
+
+/*
+ * BFI_CEE_I2H_GET_CFG_RSP
+ */
+struct bfi_cee_get_rsp_s {
+ struct bfi_mhdr_s mh;
+ u8 cmd_status;
+ u8 rsvd[3];
+};
+
+/*
+ * BFI_CEE_H2I_GET_STATS_REQ
+ */
+struct bfi_cee_stats_req_s {
+ struct bfi_mhdr_s mh;
+ union bfi_addr_u dma_addr;
+};
+
+
+/*
+ * BFI_CEE_I2H_GET_STATS_RSP
+ */
+struct bfi_cee_stats_rsp_s {
+ struct bfi_mhdr_s mh;
+ u8 cmd_status;
+ u8 rsvd[3];
+};
+
+
+
+union bfi_cee_h2i_msg_u {
+ struct bfi_mhdr_s mh;
+ struct bfi_cee_get_req_s get_req;
+ struct bfi_cee_stats_req_s stats_req;
+};
+
+
+union bfi_cee_i2h_msg_u {
+ struct bfi_mhdr_s mh;
+ struct bfi_cee_get_rsp_s get_rsp;
+ struct bfi_cee_stats_rsp_s stats_rsp;
+};
+
+#pragma pack()
+
+
+#endif /* __BFI_CEE_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_ctreg.h patch/drivers/scsi/bfa/include/bfi/bfi_ctreg.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_ctreg.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_ctreg.h 2009-03-14 11:44:58.467295000 -0700
@@ -0,0 +1,604 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * bfi_ctreg.h catapult host block register definitions
+ *
+ * !!! Do not edit. Auto generated. !!!
+ */
+
+#ifndef __BFI_CTREG_H__
+#define __BFI_CTREG_H__
+
+
+#define HOSTFN0_LPU_MBOX0_0 0x00019200
+#define HOSTFN1_LPU_MBOX0_8 0x00019260
+#define LPU_HOSTFN0_MBOX0_0 0x00019280
+#define LPU_HOSTFN1_MBOX0_8 0x000192e0
+#define HOSTFN2_LPU_MBOX0_0 0x00019400
+#define HOSTFN3_LPU_MBOX0_8 0x00019460
+#define LPU_HOSTFN2_MBOX0_0 0x00019480
+#define LPU_HOSTFN3_MBOX0_8 0x000194e0
+#define HOSTFN0_INT_STATUS 0x00014000
+#define __HOSTFN0_HALT_OCCURRED 0x01000000
+#define __HOSTFN0_INT_STATUS_LVL_MK 0x00f00000
+#define __HOSTFN0_INT_STATUS_LVL_SH 20
+#define __HOSTFN0_INT_STATUS_LVL(_v) ((_v) << __HOSTFN0_INT_STATUS_LVL_SH)
+#define __HOSTFN0_INT_STATUS_P_MK 0x000f0000
+#define __HOSTFN0_INT_STATUS_P_SH 16
+#define __HOSTFN0_INT_STATUS_P(_v) ((_v) << __HOSTFN0_INT_STATUS_P_SH)
+#define __HOSTFN0_INT_STATUS_F 0x0000ffff
+#define HOSTFN0_INT_MSK 0x00014004
+#define HOST_PAGE_NUM_FN0 0x00014008
+#define __HOST_PAGE_NUM_FN 0x000001ff
+#define HOST_MSIX_ERR_INDEX_FN0 0x0001400c
+#define __MSIX_ERR_INDEX_FN 0x000001ff
+#define HOSTFN1_INT_STATUS 0x00014100
+#define __HOSTFN1_HALT_OCCURRED 0x01000000
+#define __HOSTFN1_INT_STATUS_LVL_MK 0x00f00000
+#define __HOSTFN1_INT_STATUS_LVL_SH 20
+#define __HOSTFN1_INT_STATUS_LVL(_v) ((_v) << __HOSTFN1_INT_STATUS_LVL_SH)
+#define __HOSTFN1_INT_STATUS_P_MK 0x000f0000
+#define __HOSTFN1_INT_STATUS_P_SH 16
+#define __HOSTFN1_INT_STATUS_P(_v) ((_v) << __HOSTFN1_INT_STATUS_P_SH)
+#define __HOSTFN1_INT_STATUS_F 0x0000ffff
+#define HOSTFN1_INT_MSK 0x00014104
+#define HOST_PAGE_NUM_FN1 0x00014108
+#define HOST_MSIX_ERR_INDEX_FN1 0x0001410c
+#define APP_PLL_425_CTL_REG 0x00014204
+#define __P_425_PLL_LOCK 0x80000000
+#define __APP_PLL_425_SRAM_USE_100MHZ 0x00100000
+#define __APP_PLL_425_RESET_TIMER_MK 0x000e0000
+#define __APP_PLL_425_RESET_TIMER_SH 17
+#define __APP_PLL_425_RESET_TIMER(_v) ((_v) << __APP_PLL_425_RESET_TIMER_SH)
+#define __APP_PLL_425_LOGIC_SOFT_RESET 0x00010000
+#define __APP_PLL_425_CNTLMT0_1_MK 0x0000c000
+#define __APP_PLL_425_CNTLMT0_1_SH 14
+#define __APP_PLL_425_CNTLMT0_1(_v) ((_v) << __APP_PLL_425_CNTLMT0_1_SH)
+#define __APP_PLL_425_JITLMT0_1_MK 0x00003000
+#define __APP_PLL_425_JITLMT0_1_SH 12
+#define __APP_PLL_425_JITLMT0_1(_v) ((_v) << __APP_PLL_425_JITLMT0_1_SH)
+#define __APP_PLL_425_HREF 0x00000800
+#define __APP_PLL_425_HDIV 0x00000400
+#define __APP_PLL_425_P0_1_MK 0x00000300
+#define __APP_PLL_425_P0_1_SH 8
+#define __APP_PLL_425_P0_1(_v) ((_v) << __APP_PLL_425_P0_1_SH)
+#define __APP_PLL_425_Z0_2_MK 0x000000e0
+#define __APP_PLL_425_Z0_2_SH 5
+#define __APP_PLL_425_Z0_2(_v) ((_v) << __APP_PLL_425_Z0_2_SH)
+#define __APP_PLL_425_RSEL200500 0x00000010
+#define __APP_PLL_425_ENARST 0x00000008
+#define __APP_PLL_425_BYPASS 0x00000004
+#define __APP_PLL_425_LRESETN 0x00000002
+#define __APP_PLL_425_ENABLE 0x00000001
+#define APP_PLL_312_CTL_REG 0x00014208
+#define __P_312_PLL_LOCK 0x80000000
+#define __ENABLE_MAC_AHB_1 0x00800000
+#define __ENABLE_MAC_AHB_0 0x00400000
+#define __ENABLE_MAC_1 0x00200000
+#define __ENABLE_MAC_0 0x00100000
+#define __APP_PLL_312_RESET_TIMER_MK 0x000e0000
+#define __APP_PLL_312_RESET_TIMER_SH 17
+#define __APP_PLL_312_RESET_TIMER(_v) ((_v) << __APP_PLL_312_RESET_TIMER_SH)
+#define __APP_PLL_312_LOGIC_SOFT_RESET 0x00010000
+#define __APP_PLL_312_CNTLMT0_1_MK 0x0000c000
+#define __APP_PLL_312_CNTLMT0_1_SH 14
+#define __APP_PLL_312_CNTLMT0_1(_v) ((_v) << __APP_PLL_312_CNTLMT0_1_SH)
+#define __APP_PLL_312_JITLMT0_1_MK 0x00003000
+#define __APP_PLL_312_JITLMT0_1_SH 12
+#define __APP_PLL_312_JITLMT0_1(_v) ((_v) << __APP_PLL_312_JITLMT0_1_SH)
+#define __APP_PLL_312_HREF 0x00000800
+#define __APP_PLL_312_HDIV 0x00000400
+#define __APP_PLL_312_P0_1_MK 0x00000300
+#define __APP_PLL_312_P0_1_SH 8
+#define __APP_PLL_312_P0_1(_v) ((_v) << __APP_PLL_312_P0_1_SH)
+#define __APP_PLL_312_Z0_2_MK 0x000000e0
+#define __APP_PLL_312_Z0_2_SH 5
+#define __APP_PLL_312_Z0_2(_v) ((_v) << __APP_PLL_312_Z0_2_SH)
+#define __APP_PLL_312_RSEL200500 0x00000010
+#define __APP_PLL_312_ENARST 0x00000008
+#define __APP_PLL_312_BYPASS 0x00000004
+#define __APP_PLL_312_LRESETN 0x00000002
+#define __APP_PLL_312_ENABLE 0x00000001
+#define MBIST_CTL_REG 0x00014220
+#define __EDRAM_BISTR_START 0x00000004
+#define __MBIST_RESET 0x00000002
+#define __MBIST_START 0x00000001
+#define MBIST_STAT_REG 0x00014224
+#define __EDRAM_BISTR_STATUS 0x00000008
+#define __EDRAM_BISTR_DONE 0x00000004
+#define __MEM_BIT_STATUS 0x00000002
+#define __MBIST_DONE 0x00000001
+#define HOST_SEM0_REG 0x00014230
+#define __HOST_SEMAPHORE 0x00000001
+#define HOST_SEM1_REG 0x00014234
+#define HOST_SEM2_REG 0x00014238
+#define HOST_SEM3_REG 0x0001423c
+#define HOST_SEM0_INFO_REG 0x00014240
+#define HOST_SEM1_INFO_REG 0x00014244
+#define HOST_SEM2_INFO_REG 0x00014248
+#define HOST_SEM3_INFO_REG 0x0001424c
+#define ETH_MAC_SER_REG 0x00014288
+#define __APP_EMS_CKBUFAMPIN 0x00000020
+#define __APP_EMS_REFCLKSEL 0x00000010
+#define __APP_EMS_CMLCKSEL 0x00000008
+#define __APP_EMS_REFCKBUFEN2 0x00000004
+#define __APP_EMS_REFCKBUFEN1 0x00000002
+#define __APP_EMS_CHANNEL_SEL 0x00000001
+#define HOSTFN2_INT_STATUS 0x00014300
+#define __HOSTFN2_HALT_OCCURRED 0x01000000
+#define __HOSTFN2_INT_STATUS_LVL_MK 0x00f00000
+#define __HOSTFN2_INT_STATUS_LVL_SH 20
+#define __HOSTFN2_INT_STATUS_LVL(_v) ((_v) << __HOSTFN2_INT_STATUS_LVL_SH)
+#define __HOSTFN2_INT_STATUS_P_MK 0x000f0000
+#define __HOSTFN2_INT_STATUS_P_SH 16
+#define __HOSTFN2_INT_STATUS_P(_v) ((_v) << __HOSTFN2_INT_STATUS_P_SH)
+#define __HOSTFN2_INT_STATUS_F 0x0000ffff
+#define HOSTFN2_INT_MSK 0x00014304
+#define HOST_PAGE_NUM_FN2 0x00014308
+#define HOST_MSIX_ERR_INDEX_FN2 0x0001430c
+#define HOSTFN3_INT_STATUS 0x00014400
+#define __HALT_OCCURRED 0x01000000
+#define __HOSTFN3_INT_STATUS_LVL_MK 0x00f00000
+#define __HOSTFN3_INT_STATUS_LVL_SH 20
+#define __HOSTFN3_INT_STATUS_LVL(_v) ((_v) << __HOSTFN3_INT_STATUS_LVL_SH)
+#define __HOSTFN3_INT_STATUS_P_MK 0x000f0000
+#define __HOSTFN3_INT_STATUS_P_SH 16
+#define __HOSTFN3_INT_STATUS_P(_v) ((_v) << __HOSTFN3_INT_STATUS_P_SH)
+#define __HOSTFN3_INT_STATUS_F 0x0000ffff
+#define HOSTFN3_INT_MSK 0x00014404
+#define HOST_PAGE_NUM_FN3 0x00014408
+#define HOST_MSIX_ERR_INDEX_FN3 0x0001440c
+#define FNC_ID_REG 0x00014600
+#define __FUNCTION_NUMBER 0x00000007
+#define FNC_PERS_REG 0x00014604
+#define __F3_FUNCTION_ACTIVE 0x80000000
+#define __F3_FUNCTION_MODE 0x40000000
+#define __F3_PORT_MAP_MK 0x30000000
+#define __F3_PORT_MAP_SH 28
+#define __F3_PORT_MAP(_v) ((_v) << __F3_PORT_MAP_SH)
+#define __F3_VM_MODE 0x08000000
+#define __F3_INTX_STATUS_MK 0x07000000
+#define __F3_INTX_STATUS_SH 24
+#define __F3_INTX_STATUS(_v) ((_v) << __F3_INTX_STATUS_SH)
+#define __F2_FUNCTION_ACTIVE 0x00800000
+#define __F2_FUNCTION_MODE 0x00400000
+#define __F2_PORT_MAP_MK 0x00300000
+#define __F2_PORT_MAP_SH 20
+#define __F2_PORT_MAP(_v) ((_v) << __F2_PORT_MAP_SH)
+#define __F2_VM_MODE 0x00080000
+#define __F2_INTX_STATUS_MK 0x00070000
+#define __F2_INTX_STATUS_SH 16
+#define __F2_INTX_STATUS(_v) ((_v) << __F2_INTX_STATUS_SH)
+#define __F1_FUNCTION_ACTIVE 0x00008000
+#define __F1_FUNCTION_MODE 0x00004000
+#define __F1_PORT_MAP_MK 0x00003000
+#define __F1_PORT_MAP_SH 12
+#define __F1_PORT_MAP(_v) ((_v) << __F1_PORT_MAP_SH)
+#define __F1_VM_MODE 0x00000800
+#define __F1_INTX_STATUS_MK 0x00000700
+#define __F1_INTX_STATUS_SH 8
+#define __F1_INTX_STATUS(_v) ((_v) << __F1_INTX_STATUS_SH)
+#define __F0_FUNCTION_ACTIVE 0x00000080
+#define __F0_FUNCTION_MODE 0x00000040
+#define __F0_PORT_MAP_MK 0x00000030
+#define __F0_PORT_MAP_SH 4
+#define __F0_PORT_MAP(_v) ((_v) << __F0_PORT_MAP_SH)
+#define __F0_VM_MODE 0x00000008
+#define __F0_INTX_STATUS 0x00000007
+#define OP_MODE 0x0001460c
+#define __APP_ETH_CLK_LOWSPEED 0x00000004
+#define __GLOBAL_CORECLK_HALFSPEED 0x00000002
+#define __GLOBAL_FCOE_MODE 0x00000001
+#define HOST_SEM4_REG 0x00014610
+#define HOST_SEM5_REG 0x00014614
+#define HOST_SEM6_REG 0x00014618
+#define HOST_SEM7_REG 0x0001461c
+#define HOST_SEM4_INFO_REG 0x00014620
+#define HOST_SEM5_INFO_REG 0x00014624
+#define HOST_SEM6_INFO_REG 0x00014628
+#define HOST_SEM7_INFO_REG 0x0001462c
+#define HOSTFN0_LPU0_MBOX0_CMD_STAT 0x00019000
+#define __HOSTFN0_LPU0_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN0_LPU0_MBOX0_INFO_SH 1
+#define __HOSTFN0_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN0_LPU0_MBOX0_INFO_SH)
+#define __HOSTFN0_LPU0_MBOX0_CMD_STATUS 0x00000001
+#define HOSTFN0_LPU1_MBOX0_CMD_STAT 0x00019004
+#define __HOSTFN0_LPU1_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN0_LPU1_MBOX0_INFO_SH 1
+#define __HOSTFN0_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN0_LPU1_MBOX0_INFO_SH)
+#define __HOSTFN0_LPU1_MBOX0_CMD_STATUS 0x00000001
+#define LPU0_HOSTFN0_MBOX0_CMD_STAT 0x00019008
+#define __LPU0_HOSTFN0_MBOX0_INFO_MK 0xfffffffe
+#define __LPU0_HOSTFN0_MBOX0_INFO_SH 1
+#define __LPU0_HOSTFN0_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN0_MBOX0_INFO_SH)
+#define __LPU0_HOSTFN0_MBOX0_CMD_STATUS 0x00000001
+#define LPU1_HOSTFN0_MBOX0_CMD_STAT 0x0001900c
+#define __LPU1_HOSTFN0_MBOX0_INFO_MK 0xfffffffe
+#define __LPU1_HOSTFN0_MBOX0_INFO_SH 1
+#define __LPU1_HOSTFN0_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN0_MBOX0_INFO_SH)
+#define __LPU1_HOSTFN0_MBOX0_CMD_STATUS 0x00000001
+#define HOSTFN1_LPU0_MBOX0_CMD_STAT 0x00019010
+#define __HOSTFN1_LPU0_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN1_LPU0_MBOX0_INFO_SH 1
+#define __HOSTFN1_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN1_LPU0_MBOX0_INFO_SH)
+#define __HOSTFN1_LPU0_MBOX0_CMD_STATUS 0x00000001
+#define HOSTFN1_LPU1_MBOX0_CMD_STAT 0x00019014
+#define __HOSTFN1_LPU1_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN1_LPU1_MBOX0_INFO_SH 1
+#define __HOSTFN1_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN1_LPU1_MBOX0_INFO_SH)
+#define __HOSTFN1_LPU1_MBOX0_CMD_STATUS 0x00000001
+#define LPU0_HOSTFN1_MBOX0_CMD_STAT 0x00019018
+#define __LPU0_HOSTFN1_MBOX0_INFO_MK 0xfffffffe
+#define __LPU0_HOSTFN1_MBOX0_INFO_SH 1
+#define __LPU0_HOSTFN1_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN1_MBOX0_INFO_SH)
+#define __LPU0_HOSTFN1_MBOX0_CMD_STATUS 0x00000001
+#define LPU1_HOSTFN1_MBOX0_CMD_STAT 0x0001901c
+#define __LPU1_HOSTFN1_MBOX0_INFO_MK 0xfffffffe
+#define __LPU1_HOSTFN1_MBOX0_INFO_SH 1
+#define __LPU1_HOSTFN1_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN1_MBOX0_INFO_SH)
+#define __LPU1_HOSTFN1_MBOX0_CMD_STATUS 0x00000001
+#define HOSTFN2_LPU0_MBOX0_CMD_STAT 0x00019150
+#define __HOSTFN2_LPU0_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN2_LPU0_MBOX0_INFO_SH 1
+#define __HOSTFN2_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN2_LPU0_MBOX0_INFO_SH)
+#define __HOSTFN2_LPU0_MBOX0_CMD_STATUS 0x00000001
+#define HOSTFN2_LPU1_MBOX0_CMD_STAT 0x00019154
+#define __HOSTFN2_LPU1_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN2_LPU1_MBOX0_INFO_SH 1
+#define __HOSTFN2_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN2_LPU1_MBOX0_INFO_SH)
+#define __HOSTFN2_LPU1_MBOX0BOX0_CMD_STATUS 0x00000001
+#define LPU0_HOSTFN2_MBOX0_CMD_STAT 0x00019158
+#define __LPU0_HOSTFN2_MBOX0_INFO_MK 0xfffffffe
+#define __LPU0_HOSTFN2_MBOX0_INFO_SH 1
+#define __LPU0_HOSTFN2_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN2_MBOX0_INFO_SH)
+#define __LPU0_HOSTFN2_MBOX0_CMD_STATUS 0x00000001
+#define LPU1_HOSTFN2_MBOX0_CMD_STAT 0x0001915c
+#define __LPU1_HOSTFN2_MBOX0_INFO_MK 0xfffffffe
+#define __LPU1_HOSTFN2_MBOX0_INFO_SH 1
+#define __LPU1_HOSTFN2_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN2_MBOX0_INFO_SH)
+#define __LPU1_HOSTFN2_MBOX0_CMD_STATUS 0x00000001
+#define HOSTFN3_LPU0_MBOX0_CMD_STAT 0x00019160
+#define __HOSTFN3_LPU0_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN3_LPU0_MBOX0_INFO_SH 1
+#define __HOSTFN3_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN3_LPU0_MBOX0_INFO_SH)
+#define __HOSTFN3_LPU0_MBOX0_CMD_STATUS 0x00000001
+#define HOSTFN3_LPU1_MBOX0_CMD_STAT 0x00019164
+#define __HOSTFN3_LPU1_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN3_LPU1_MBOX0_INFO_SH 1
+#define __HOSTFN3_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN3_LPU1_MBOX0_INFO_SH)
+#define __HOSTFN3_LPU1_MBOX0_CMD_STATUS 0x00000001
+#define LPU0_HOSTFN3_MBOX0_CMD_STAT 0x00019168
+#define __LPU0_HOSTFN3_MBOX0_INFO_MK 0xfffffffe
+#define __LPU0_HOSTFN3_MBOX0_INFO_SH 1
+#define __LPU0_HOSTFN3_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN3_MBOX0_INFO_SH)
+#define __LPU0_HOSTFN3_MBOX0_CMD_STATUS 0x00000001
+#define LPU1_HOSTFN3_MBOX0_CMD_STAT 0x0001916c
+#define __LPU1_HOSTFN3_MBOX0_INFO_MK 0xfffffffe
+#define __LPU1_HOSTFN3_MBOX0_INFO_SH 1
+#define __LPU1_HOSTFN3_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN3_MBOX0_INFO_SH)
+#define __LPU1_HOSTFN3_MBOX0_CMD_STATUS 0x00000001
+#define CPE_PI_PTR_Q0 0x00038000
+#define __CPE_PI_UNUSED_MK 0xffff0000
+#define __CPE_PI_UNUSED_SH 16
+#define __CPE_PI_UNUSED(_v) ((_v) << __CPE_PI_UNUSED_SH)
+#define __CPE_PI_PTR 0x0000ffff
+#define CPE_PI_PTR_Q1 0x00038040
+#define CPE_CI_PTR_Q0 0x00038004
+#define __CPE_CI_UNUSED_MK 0xffff0000
+#define __CPE_CI_UNUSED_SH 16
+#define __CPE_CI_UNUSED(_v) ((_v) << __CPE_CI_UNUSED_SH)
+#define __CPE_CI_PTR 0x0000ffff
+#define CPE_CI_PTR_Q1 0x00038044
+#define CPE_DEPTH_Q0 0x00038008
+#define __CPE_DEPTH_UNUSED_MK 0xf8000000
+#define __CPE_DEPTH_UNUSED_SH 27
+#define __CPE_DEPTH_UNUSED(_v) ((_v) << __CPE_DEPTH_UNUSED_SH)
+#define __CPE_MSIX_VEC_INDEX_MK 0x07ff0000
+#define __CPE_MSIX_VEC_INDEX_SH 16
+#define __CPE_MSIX_VEC_INDEX(_v) ((_v) << __CPE_MSIX_VEC_INDEX_SH)
+#define __CPE_DEPTH 0x0000ffff
+#define CPE_DEPTH_Q1 0x00038048
+#define CPE_QCTRL_Q0 0x0003800c
+#define __CPE_CTRL_UNUSED30_MK 0xfc000000
+#define __CPE_CTRL_UNUSED30_SH 26
+#define __CPE_CTRL_UNUSED30(_v) ((_v) << __CPE_CTRL_UNUSED30_SH)
+#define __CPE_FUNC_INT_CTRL_MK 0x03000000
+#define __CPE_FUNC_INT_CTRL_SH 24
+#define __CPE_FUNC_INT_CTRL(_v) ((_v) << __CPE_FUNC_INT_CTRL_SH)
+enum {
+ __CPE_FUNC_INT_CTRL_DISABLE = 0x0,
+ __CPE_FUNC_INT_CTRL_F2NF = 0x1,
+ __CPE_FUNC_INT_CTRL_3QUART = 0x2,
+ __CPE_FUNC_INT_CTRL_HALF = 0x3,
+};
+#define __CPE_CTRL_UNUSED20_MK 0x00f00000
+#define __CPE_CTRL_UNUSED20_SH 20
+#define __CPE_CTRL_UNUSED20(_v) ((_v) << __CPE_CTRL_UNUSED20_SH)
+#define __CPE_SCI_TH_MK 0x000f0000
+#define __CPE_SCI_TH_SH 16
+#define __CPE_SCI_TH(_v) ((_v) << __CPE_SCI_TH_SH)
+#define __CPE_CTRL_UNUSED10_MK 0x0000c000
+#define __CPE_CTRL_UNUSED10_SH 14
+#define __CPE_CTRL_UNUSED10(_v) ((_v) << __CPE_CTRL_UNUSED10_SH)
+#define __CPE_ACK_PENDING 0x00002000
+#define __CPE_CTRL_UNUSED40_MK 0x00001c00
+#define __CPE_CTRL_UNUSED40_SH 10
+#define __CPE_CTRL_UNUSED40(_v) ((_v) << __CPE_CTRL_UNUSED40_SH)
+#define __CPE_PCIEID_MK 0x00000300
+#define __CPE_PCIEID_SH 8
+#define __CPE_PCIEID(_v) ((_v) << __CPE_PCIEID_SH)
+#define __CPE_CTRL_UNUSED00_MK 0x000000fe
+#define __CPE_CTRL_UNUSED00_SH 1
+#define __CPE_CTRL_UNUSED00(_v) ((_v) << __CPE_CTRL_UNUSED00_SH)
+#define __CPE_ESIZE 0x00000001
+#define CPE_QCTRL_Q1 0x0003804c
+#define __CPE_CTRL_UNUSED31_MK 0xfc000000
+#define __CPE_CTRL_UNUSED31_SH 26
+#define __CPE_CTRL_UNUSED31(_v) ((_v) << __CPE_CTRL_UNUSED31_SH)
+#define __CPE_CTRL_UNUSED21_MK 0x00f00000
+#define __CPE_CTRL_UNUSED21_SH 20
+#define __CPE_CTRL_UNUSED21(_v) ((_v) << __CPE_CTRL_UNUSED21_SH)
+#define __CPE_CTRL_UNUSED11_MK 0x0000c000
+#define __CPE_CTRL_UNUSED11_SH 14
+#define __CPE_CTRL_UNUSED11(_v) ((_v) << __CPE_CTRL_UNUSED11_SH)
+#define __CPE_CTRL_UNUSED41_MK 0x00001c00
+#define __CPE_CTRL_UNUSED41_SH 10
+#define __CPE_CTRL_UNUSED41(_v) ((_v) << __CPE_CTRL_UNUSED41_SH)
+#define __CPE_CTRL_UNUSED01_MK 0x000000fe
+#define __CPE_CTRL_UNUSED01_SH 1
+#define __CPE_CTRL_UNUSED01(_v) ((_v) << __CPE_CTRL_UNUSED01_SH)
+#define RME_PI_PTR_Q0 0x00038020
+#define __LATENCY_TIME_STAMP_MK 0xffff0000
+#define __LATENCY_TIME_STAMP_SH 16
+#define __LATENCY_TIME_STAMP(_v) ((_v) << __LATENCY_TIME_STAMP_SH)
+#define __RME_PI_PTR 0x0000ffff
+#define RME_PI_PTR_Q1 0x00038060
+#define RME_CI_PTR_Q0 0x00038024
+#define __DELAY_TIME_STAMP_MK 0xffff0000
+#define __DELAY_TIME_STAMP_SH 16
+#define __DELAY_TIME_STAMP(_v) ((_v) << __DELAY_TIME_STAMP_SH)
+#define __RME_CI_PTR 0x0000ffff
+#define RME_CI_PTR_Q1 0x00038064
+#define RME_DEPTH_Q0 0x00038028
+#define __RME_DEPTH_UNUSED_MK 0xf8000000
+#define __RME_DEPTH_UNUSED_SH 27
+#define __RME_DEPTH_UNUSED(_v) ((_v) << __RME_DEPTH_UNUSED_SH)
+#define __RME_MSIX_VEC_INDEX_MK 0x07ff0000
+#define __RME_MSIX_VEC_INDEX_SH 16
+#define __RME_MSIX_VEC_INDEX(_v) ((_v) << __RME_MSIX_VEC_INDEX_SH)
+#define __RME_DEPTH 0x0000ffff
+#define RME_DEPTH_Q1 0x00038068
+#define RME_QCTRL_Q0 0x0003802c
+#define __RME_INT_LATENCY_TIMER_MK 0xff000000
+#define __RME_INT_LATENCY_TIMER_SH 24
+#define __RME_INT_LATENCY_TIMER(_v) ((_v) << __RME_INT_LATENCY_TIMER_SH)
+#define __RME_INT_DELAY_TIMER_MK 0x00ff0000
+#define __RME_INT_DELAY_TIMER_SH 16
+#define __RME_INT_DELAY_TIMER(_v) ((_v) << __RME_INT_DELAY_TIMER_SH)
+#define __RME_INT_DELAY_DISABLE 0x00008000
+#define __RME_DLY_DELAY_DISABLE 0x00004000
+#define __RME_ACK_PENDING 0x00002000
+#define __RME_FULL_INTERRUPT_DISABLE 0x00001000
+#define __RME_CTRL_UNUSED10_MK 0x00000c00
+#define __RME_CTRL_UNUSED10_SH 10
+#define __RME_CTRL_UNUSED10(_v) ((_v) << __RME_CTRL_UNUSED10_SH)
+#define __RME_PCIEID_MK 0x00000300
+#define __RME_PCIEID_SH 8
+#define __RME_PCIEID(_v) ((_v) << __RME_PCIEID_SH)
+#define __RME_CTRL_UNUSED00_MK 0x000000fe
+#define __RME_CTRL_UNUSED00_SH 1
+#define __RME_CTRL_UNUSED00(_v) ((_v) << __RME_CTRL_UNUSED00_SH)
+#define __RME_ESIZE 0x00000001
+#define RME_QCTRL_Q1 0x0003806c
+#define __RME_CTRL_UNUSED11_MK 0x00000c00
+#define __RME_CTRL_UNUSED11_SH 10
+#define __RME_CTRL_UNUSED11(_v) ((_v) << __RME_CTRL_UNUSED11_SH)
+#define __RME_CTRL_UNUSED01_MK 0x000000fe
+#define __RME_CTRL_UNUSED01_SH 1
+#define __RME_CTRL_UNUSED01(_v) ((_v) << __RME_CTRL_UNUSED01_SH)
+#define PSS_CTL_REG 0x00018800
+#define __PSS_I2C_CLK_DIV_MK 0x007f0000
+#define __PSS_I2C_CLK_DIV_SH 16
+#define __PSS_I2C_CLK_DIV(_v) ((_v) << __PSS_I2C_CLK_DIV_SH)
+#define __PSS_LMEM_INIT_DONE 0x00001000
+#define __PSS_LMEM_RESET 0x00000200
+#define __PSS_LMEM_INIT_EN 0x00000100
+#define __PSS_LPU1_RESET 0x00000002
+#define __PSS_LPU0_RESET 0x00000001
+#define HQM_QSET0_RXQ_DRBL_P0 0x00038000
+#define __RXQ0_ADD_VECTORS_P 0x80000000
+#define __RXQ0_STOP_P 0x40000000
+#define __RXQ0_PRD_PTR_P 0x0000ffff
+#define HQM_QSET1_RXQ_DRBL_P0 0x00038080
+#define __RXQ1_ADD_VECTORS_P 0x80000000
+#define __RXQ1_STOP_P 0x40000000
+#define __RXQ1_PRD_PTR_P 0x0000ffff
+#define HQM_QSET0_RXQ_DRBL_P1 0x0003c000
+#define HQM_QSET1_RXQ_DRBL_P1 0x0003c080
+#define HQM_QSET0_TXQ_DRBL_P0 0x00038020
+#define __TXQ0_ADD_VECTORS_P 0x80000000
+#define __TXQ0_STOP_P 0x40000000
+#define __TXQ0_PRD_PTR_P 0x0000ffff
+#define HQM_QSET1_TXQ_DRBL_P0 0x000380a0
+#define __TXQ1_ADD_VECTORS_P 0x80000000
+#define __TXQ1_STOP_P 0x40000000
+#define __TXQ1_PRD_PTR_P 0x0000ffff
+#define HQM_QSET0_TXQ_DRBL_P1 0x0003c020
+#define HQM_QSET1_TXQ_DRBL_P1 0x0003c0a0
+#define HQM_QSET0_IB_DRBL_1_P0 0x00038040
+#define __IB1_0_ACK_P 0x80000000
+#define __IB1_0_DISABLE_P 0x40000000
+#define __IB1_0_NUM_OF_ACKED_EVENTS_P 0x0000ffff
+#define HQM_QSET1_IB_DRBL_1_P0 0x000380c0
+#define __IB1_1_ACK_P 0x80000000
+#define __IB1_1_DISABLE_P 0x40000000
+#define __IB1_1_NUM_OF_ACKED_EVENTS_P 0x0000ffff
+#define HQM_QSET0_IB_DRBL_1_P1 0x0003c040
+#define HQM_QSET1_IB_DRBL_1_P1 0x0003c0c0
+#define HQM_QSET0_IB_DRBL_2_P0 0x00038060
+#define __IB2_0_ACK_P 0x80000000
+#define __IB2_0_DISABLE_P 0x40000000
+#define __IB2_0_NUM_OF_ACKED_EVENTS_P 0x0000ffff
+#define HQM_QSET1_IB_DRBL_2_P0 0x000380e0
+#define __IB2_1_ACK_P 0x80000000
+#define __IB2_1_DISABLE_P 0x40000000
+#define __IB2_1_NUM_OF_ACKED_EVENTS_P 0x0000ffff
+#define HQM_QSET0_IB_DRBL_2_P1 0x0003c060
+#define HQM_QSET1_IB_DRBL_2_P1 0x0003c0e0
+
+
+/*
+ * These definitions are either in error/missing in spec. Its auto-generated
+ * from hard coded values in regparse.pl.
+ */
+#define __EMPHPOST_AT_4G_MK_FIX 0x0000001c
+#define __EMPHPOST_AT_4G_SH_FIX 0x00000002
+#define __EMPHPRE_AT_4G_FIX 0x00000003
+#define __SFP_TXRATE_EN_FIX 0x00000100
+#define __SFP_RXRATE_EN_FIX 0x00000080
+
+
+/*
+ * These register definitions are auto-generated from hard coded values
+ * in regparse.pl.
+ */
+
+
+/*
+ * These register mapping definitions are auto-generated from mapping tables
+ * in regparse.pl.
+ */
+#define BFA_IOC0_HBEAT_REG HOST_SEM0_INFO_REG
+#define BFA_IOC0_STATE_REG HOST_SEM1_INFO_REG
+#define BFA_IOC1_HBEAT_REG HOST_SEM2_INFO_REG
+#define BFA_IOC1_STATE_REG HOST_SEM3_INFO_REG
+
+#define CPE_DEPTH_Q(__n) \
+ (CPE_DEPTH_Q0 + (__n) * (CPE_DEPTH_Q1 - CPE_DEPTH_Q0))
+#define CPE_QCTRL_Q(__n) \
+ (CPE_QCTRL_Q0 + (__n) * (CPE_QCTRL_Q1 - CPE_QCTRL_Q0))
+#define CPE_PI_PTR_Q(__n) \
+ (CPE_PI_PTR_Q0 + (__n) * (CPE_PI_PTR_Q1 - CPE_PI_PTR_Q0))
+#define CPE_CI_PTR_Q(__n) \
+ (CPE_CI_PTR_Q0 + (__n) * (CPE_CI_PTR_Q1 - CPE_CI_PTR_Q0))
+#define RME_DEPTH_Q(__n) \
+ (RME_DEPTH_Q0 + (__n) * (RME_DEPTH_Q1 - RME_DEPTH_Q0))
+#define RME_QCTRL_Q(__n) \
+ (RME_QCTRL_Q0 + (__n) * (RME_QCTRL_Q1 - RME_QCTRL_Q0))
+#define RME_PI_PTR_Q(__n) \
+ (RME_PI_PTR_Q0 + (__n) * (RME_PI_PTR_Q1 - RME_PI_PTR_Q0))
+#define RME_CI_PTR_Q(__n) \
+ (RME_CI_PTR_Q0 + (__n) * (RME_CI_PTR_Q1 - RME_CI_PTR_Q0))
+#define HQM_QSET_RXQ_DRBL_P0(__n) \
+ (HQM_QSET0_RXQ_DRBL_P0 + (__n) * (HQM_QSET1_RXQ_DRBL_P0 - HQM_QSET0_RXQ_DRBL_P0))
+#define HQM_QSET_TXQ_DRBL_P0(__n) \
+ (HQM_QSET0_TXQ_DRBL_P0 + (__n) * (HQM_QSET1_TXQ_DRBL_P0 - HQM_QSET0_TXQ_DRBL_P0))
+#define HQM_QSET_IB_DRBL_1_P0(__n) \
+ (HQM_QSET0_IB_DRBL_1_P0 + (__n) * (HQM_QSET1_IB_DRBL_1_P0 - HQM_QSET0_IB_DRBL_1_P0))
+#define HQM_QSET_IB_DRBL_2_P0(__n) \
+ (HQM_QSET0_IB_DRBL_2_P0 + (__n) * (HQM_QSET1_IB_DRBL_2_P0 - HQM_QSET0_IB_DRBL_2_P0))
+#define HQM_QSET_RXQ_DRBL_P1(__n) \
+ (HQM_QSET0_RXQ_DRBL_P1 + (__n) * (HQM_QSET1_RXQ_DRBL_P1 - HQM_QSET0_RXQ_DRBL_P1))
+#define HQM_QSET_TXQ_DRBL_P1(__n) \
+ (HQM_QSET0_TXQ_DRBL_P1 + (__n) * (HQM_QSET1_TXQ_DRBL_P1 - HQM_QSET0_TXQ_DRBL_P1))
+#define HQM_QSET_IB_DRBL_1_P1(__n) \
+ (HQM_QSET0_IB_DRBL_1_P1 + (__n) * (HQM_QSET1_IB_DRBL_1_P1 - HQM_QSET0_IB_DRBL_1_P1))
+#define HQM_QSET_IB_DRBL_2_P1(__n) \
+ (HQM_QSET0_IB_DRBL_2_P1 + (__n) * (HQM_QSET1_IB_DRBL_2_P1 - HQM_QSET0_IB_DRBL_2_P1))
+
+#define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
+#define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
+#define CPE_Q_MASK(__q) ((__q) & 0x3)
+#define RME_Q_MASK(__q) ((__q) & 0x3)
+
+
+/*
+ * PCI MSI-X vector defines
+ */
+enum {
+ HFN_MSIX_CPE_Q0 = 0,
+ HFN_MSIX_CPE_Q1 = 1,
+ HFN_MSIX_CPE_Q2 = 2,
+ HFN_MSIX_CPE_Q3 = 3,
+ HFN_MSIX_CPE_Q4 = 4,
+ HFN_MSIX_CPE_Q5 = 5,
+ HFN_MSIX_CPE_Q6 = 6,
+ HFN_MSIX_CPE_Q7 = 7,
+ HFN_MSIX_RME_Q0 = 8,
+ HFN_MSIX_RME_Q1 = 9,
+ HFN_MSIX_RME_Q2 = 10,
+ HFN_MSIX_RME_Q3 = 11,
+ HFN_MSIX_RME_Q4 = 12,
+ HFN_MSIX_RME_Q5 = 13,
+ HFN_MSIX_RME_Q6 = 14,
+ HFN_MSIX_RME_Q7 = 15,
+ HFN_MSIX_ERR_EMC = 16,
+ HFN_MSIX_ERR_LPU0 = 17,
+ HFN_MSIX_ERR_LPU1 = 18,
+ HFN_MSIX_ERR_PSS = 19,
+ HFN_MSIX_MBOX_LPU0 = 20,
+ HFN_MSIX_MBOX_LPU1 = 21,
+ HFN_MSIX_GP_LPU0 = 22,
+ HFN_MSIX_GP_LPU1 = 23,
+};
+
+/*
+ * And corresponding host interrupt status bit field defines
+ */
+#define __HFN_INT_CPE_Q0 0x00000001U
+#define __HFN_INT_CPE_Q1 0x00000002U
+#define __HFN_INT_CPE_Q2 0x00000004U
+#define __HFN_INT_CPE_Q3 0x00000008U
+#define __HFN_INT_CPE_Q4 0x00000010U
+#define __HFN_INT_CPE_Q5 0x00000020U
+#define __HFN_INT_CPE_Q6 0x00000040U
+#define __HFN_INT_CPE_Q7 0x00000080U
+#define __HFN_INT_RME_Q0 0x00000100U
+#define __HFN_INT_RME_Q1 0x00000200U
+#define __HFN_INT_RME_Q2 0x00000400U
+#define __HFN_INT_RME_Q3 0x00000800U
+#define __HFN_INT_RME_Q4 0x00001000U
+#define __HFN_INT_RME_Q5 0x00002000U
+#define __HFN_INT_RME_Q6 0x00004000U
+#define __HFN_INT_RME_Q7 0x00008000U
+#define __HFN_INT_ERR_EMC 0x00010000U
+#define __HFN_INT_ERR_LPU0 0x00020000U
+#define __HFN_INT_ERR_LPU1 0x00040000U
+#define __HFN_INT_ERR_PSS 0x00080000U
+#define __HFN_INT_MBOX_LPU0 0x00100000U
+#define __HFN_INT_MBOX_LPU1 0x00200000U
+#define __HFN_INT_GP_LPU0 0x00400000U
+#define __HFN_INT_GP_LPU1 0x00800000U
+
+
+/*
+ * catapult memory map.
+ */
+#define LL_PGN_HQM0 0x0096
+#define LL_PGN_HQM1 0x0097
+#define PSS_SMEM_PAGE_START 0x8000
+#define PSS_SMEM_PGNUM(_pg0, _ma) ((_pg0) + ((_ma) >> 15))
+#define PSS_SMEM_PGOFF(_ma) ((_ma) & 0x7fff)
+
+/*
+ * End of catapult memory map
+ */
+
+
+#endif /* __BFI_CTREG_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_diag.h patch/drivers/scsi/bfa/include/bfi/bfi_diag.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_diag.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_diag.h 2009-03-14 11:44:58.501217000 -0700
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_DIAG_H__
+#define __BFI_DIAG_H__
+
+#include <defs/bfa_defs_diag.h>
+#include <defs/bfa_defs_pport.h>
+#include <protocol/sfp.h>
+#include "bfi.h"
+
+#pragma pack(1)
+
+enum bfi_diag_h2i {
+ BFI_DIAG_H2I_PORTBEACON = 1,
+ BFI_DIAG_H2I_LOOPBACK = 2,
+ BFI_DIAG_H2I_FWPING = 3,
+ BFI_DIAG_H2I_TEMPSENSOR = 4,
+ BFI_DIAG_H2I_SFPSHOW = 5,
+ BFI_DIAG_H2I_LEDTEST = 6,
+ BFI_DIAG_H2I_SFP_SCN = 7,
+ BFI_DIAG_H2I_QTEST = 8,
+};
+
+enum bfi_diag_i2h {
+ BFI_DIAG_I2H_PORTBEACON = BFA_I2HM(BFI_DIAG_H2I_PORTBEACON),
+ BFI_DIAG_I2H_LOOPBACK = BFA_I2HM(BFI_DIAG_H2I_LOOPBACK),
+ BFI_DIAG_I2H_FWPING = BFA_I2HM(BFI_DIAG_H2I_FWPING),
+ BFI_DIAG_I2H_TEMPSENSOR = BFA_I2HM(BFI_DIAG_H2I_TEMPSENSOR),
+ BFI_DIAG_I2H_SFPSHOW = BFA_I2HM(BFI_DIAG_H2I_SFPSHOW),
+ BFI_DIAG_I2H_LEDTEST = BFA_I2HM(BFI_DIAG_H2I_LEDTEST),
+ BFI_DIAG_I2H_SFP_SCN = BFA_I2HM(BFI_DIAG_H2I_SFP_SCN),
+ BFI_DIAG_I2H_QTEST = BFA_I2HM(BFI_DIAG_H2I_QTEST),
+};
+
+#define BFI_DIAG_MAX_SGES 2
+#define BFI_DIAG_DMA_BUF_SZ (2 * 1024)
+
+/**
+ * Loopback
+ */
+struct bfi_diag_lb_req_s {
+ struct bfi_mhdr_s mh;
+ u32 loopcnt;
+ u32 pattern;
+ u8 lb_mode; /* bfa_pport_opmode_t */
+ u8 speed; /* bfa_pport_speed_t */
+ u8 rsvd[2];
+};
+
+struct bfi_diag_lb_rsp_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+ struct bfa_diag_loopback_result_s res; /* 16 bytes */
+};
+
+/**
+ * FW Ping
+ */
+struct bfi_diag_fwping_req_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+ struct bfi_sge_s sge; /* 12 bytes */
+ u32 data; /* user input data pattern */
+ u32 count; /* user input dma count */
+ u8 qtag; /* track CPE vc */
+ u8 rsv[3];
+};
+
+struct bfi_diag_fwping_rsp_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+ u32 data; /* user input data pattern */
+ u8 qtag; /* track CPE vc */
+ u8 dma_status; /* dma status */
+ u8 rsv[2];
+};
+
+/**
+ * Temperature Sensor
+ */
+struct bfi_diag_ts_generic_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+ u16 temp; /* 10-bit A/D value */
+ u8 rsv[2];
+};
+#define bfi_diag_ts_req_t struct bfi_diag_ts_generic_s
+#define bfi_diag_ts_rsp_t struct bfi_diag_ts_generic_s
+
+/**
+ * SFP memory access type
+ */
+enum bfi_diag_sfpmem {
+ BFI_DIAG_SFP_MEM_NONE = 0x0,
+ BFI_DIAG_SFP_MEM_ALL = 0x1,
+};
+
+struct bfi_diag_sfp_req_s {
+ struct bfi_mhdr_s mh;
+ struct bfi_sge_s req_sge; /* 12 bytes */
+ u8 memtype; /* ref bfi_diag_sfpmem_t */
+ u8 addr_change;
+ u8 static_data;
+ u8 rsvd;
+};
+
+struct bfi_diag_sfp_rsp_s {
+ struct bfi_mhdr_s mh;
+ u8 memtype; /* ref bfi_diag_sfpmem_t */
+ u8 status;
+ u8 rsvd[2];
+};
+
+/**
+ * LED Test
+ */
+struct bfi_diag_ledtest_req_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+ u8 cmd;
+ u8 color;
+ u8 portid;
+ u8 led; /* bitmap of LEDs to be tested */
+ u16 freq; /* no. of blinks every 10 secs */
+ u8 rsv[2];
+};
+
+/* notify host led operation is done */
+struct bfi_diag_ledtest_rsp_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+};
+
+/**
+ * Port beaconing
+ */
+struct bfi_diag_portbeacon_req_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+ u32 period; /* beaconing period */
+ bfa_boolean_t beacon; /* 1: beacon on */
+};
+
+/* notify host the beacon is off */
+struct bfi_diag_portbeacon_rsp_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+};
+
+/**
+ * SFP state notification
+ */
+struct bfi_diag_sfp_event_s {
+ struct bfi_mhdr_s mhr; /* host msg header */
+ u8 event;
+ u8 sfpid;
+ u8 pomlvl; /* pom level: normal/warning/alarm*/
+ u8 rsvd;
+};
+
+/**
+ * Queue test
+ */
+struct bfi_diag_qtest_generic_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+ u32 data[BFI_LMSG_PL_WSZ]; /* fill up tcm prefetch area */
+};
+#define bfi_diag_qtest_req_t struct bfi_diag_qtest_generic_s
+#define bfi_diag_qtest_rsp_t struct bfi_diag_qtest_generic_s
+
+#pragma pack()
+
+#endif /* __BFI_DIAG_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_fabric.h patch/drivers/scsi/bfa/include/bfi/bfi_fabric.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_fabric.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_fabric.h 2009-03-14 11:44:58.451992000 -0700
@@ -0,0 +1,112 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_FABRIC_H__
+#define __BFI_FABRIC_H__
+
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+enum bfi_fabric_h2i_msgs {
+ BFI_FABRIC_H2I_START_REQ = 1,
+ BFI_FABRIC_H2I_STOP_REQ = 2,
+ BFI_FABRIC_H2I_SETAUTH = 3,
+ BFI_FABRIC_H2I_AUTH_START = 4,
+};
+
+enum bfa_fabric_type{
+ FABRIC_UNKNOWN = 0,
+ FABRIC_SWITCHED = 1,
+ FABRIC_PLOOP = 2,
+ FABRIC_N2N = 3,
+ FABRIC_LOOPBACK = 4,
+};
+
+enum bfi_fabric_i2h_msgs {
+ BFI_FABRIC_I2H_AUTH_START_RSP = BFA_I2HM(3),
+ BFI_FABRIC_I2H_ONLINE = BFA_I2HM(4),
+ BFI_FABRIC_I2H_OFFLINE = BFA_I2HM(5),
+};
+
+struct bfi_fabric_start_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 vf_en; /* virtual fabric enable */
+ u8 rsvd;
+ u16 vf_id; /* virtual fabric ID */
+ wwn_t pwwn; /* port name */
+ wwn_t nwwn; /* node name */
+};
+
+
+struct bfi_fabric_stop_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 vf_id; /* firmware fabric handle */
+ u16 rsvd;
+};
+
+struct bfi_fabric_port_status_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 fw_handle; /* firmware fabric handle */
+ u8 status;/*enum bfa_fabric_type online / offline/ loopback/ no fabric*/
+ u8 rsvd;
+ wwn_t fabric_name;
+};
+
+#define BFI_FABRIC_AUTHSECRET_LEN 64
+struct bfi_fabric_setauth_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 fw_handle; /* f/w handle of fabric */
+ u8 algo;
+ u8 group;
+ u8 policy;
+ u8 secret_len;
+ u8 rsvd[2];
+ u8 secret[BFI_FABRIC_AUTHSECRET_LEN];
+};
+
+struct bfi_fabric_auth_start_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 fw_handle; /* f/w handle of fabric */
+};
+
+struct bfi_fabric_auth_start_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 fw_handle; /* f/w handle of fabric */
+ u8 status;
+ u8 algo;
+ u8 group;
+ u8 rsvd[3];
+};
+
+union bfi_fabric_h2i_msg_u {
+ struct bfi_msg_s *msg;
+ struct bfi_fabric_start_req_s *start_req;
+ struct bfi_fabric_stop_req_s *stop_req;
+ struct bfi_fabric_setauth_req_s *auth_req;
+};
+
+union bfi_fabric_i2h_msg_u {
+ struct bfi_msg_s *msg;
+ struct bfi_fabric_port_status_s *status_rsp;
+ struct bfi_fabric_auth_start_rsp_s *auth_rsp;
+};
+
+#pragma pack()
+
+#endif /* __BFI_FABRIC_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_fcpim.h patch/drivers/scsi/bfa/include/bfi/bfi_fcpim.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_fcpim.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_fcpim.h 2009-03-14 11:44:58.409367000 -0700
@@ -0,0 +1,360 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_FCPIM_H__
+#define __BFI_FCPIM_H__
+
+#include "bfi.h"
+#include <protocol/fcp.h>
+
+#pragma pack(1)
+
+/*
+ * Initiator mode I-T nexus interface defines.
+ */
+
+enum bfi_itnim_h2i {
+ BFI_ITNIM_H2I_CREATE_REQ = 1, /* i-t nexus creation */
+ BFI_ITNIM_H2I_DELETE_REQ = 2, /* i-t nexus deletion */
+
+ /*
+ * These following messages are added as part of FCS
+ * functionality in f/w
+ */
+ BFI_ITNIM_H2I_PRLO_RSP = 3, /* bfa response to PRLO handling */
+};
+
+enum bfi_itnim_i2h {
+ BFI_ITNIM_I2H_CREATE_RSP = BFA_I2HM(1),
+ BFI_ITNIM_I2H_DELETE_RSP = BFA_I2HM(2),
+ BFI_ITNIM_I2H_SLER_EVENT = BFA_I2HM(3),
+
+ /*
+ * These following messages are added as part of FCS
+ * functionality in f/w
+ */
+ BFI_ITNIM_I2H_UP = BFA_I2HM(4),
+ BFI_ITNIM_I2H_DOWN = BFA_I2HM(5),
+ BFI_ITNIM_I2H_PRLO = BFA_I2HM(6),
+};
+
+struct bfi_itnim_create_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 itnim_tag; /* itnim tag */
+ u8 class; /* FC class for IO */
+ u8 seq_rec; /* sequence recovery support */
+ u8 msg_no; /* seq id of the msg */
+ u8 rsvd[3];
+};
+
+struct bfi_itnim_create_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 itnim_tag; /* itnim tag */
+ u8 status; /* fcp request status */
+ u8 seq_id; /* seq id of the msg */
+};
+
+struct bfi_itnim_delete_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 itnim_tag; /* itnim tag */
+ u8 seq_id; /* seq id of the msg */
+ u8 rsvd;
+};
+
+struct bfi_itnim_delete_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 itnim_tag; /* itnim tag */
+ u8 status; /* fcp request status */
+ u8 seq_id; /* seq id of the msg */
+};
+
+struct bfi_itnim_sler_event_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 itnim_tag; /* itnim tag */
+ u16 rsvd;
+};
+
+union bfi_itnim_h2i_msg_u {
+ struct bfi_itnim_create_req_s *create_req;
+ struct bfi_itnim_delete_req_s *delete_req;
+ struct bfi_itnim_prlo_rsp_s *prlo_rsp;
+ struct bfi_msg_s *msg;
+};
+
+union bfi_itnim_i2h_msg_u {
+ struct bfi_itnim_create_rsp_s *create_rsp;
+ struct bfi_itnim_delete_rsp_s *delete_rsp;
+ struct bfi_itnim_sler_event_s *sler_event;
+ struct bfi_itnim_add_event_s *add_event;
+ struct bfi_itnim_remove_event_s *remove_event;
+ struct bfi_itnim_prlo_event_s *prlo_event;
+ struct bfi_msg_s *msg;
+};
+
+struct bfi_itnim_add_event_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 itnim_tag; /* itnim tag */
+ u8 class; /* FC class for IO */
+ u8 seq_rec; /* sequence recovery support */
+ u8 rec_support; /* REC support */
+ u8 task_retry_id; /* task retry support */
+ u8 confirm; /* fcp confirmation supp */
+ u8 msg_no; /* seq id of the msg */
+};
+
+struct bfi_itnim_remove_event_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 itnim_tag; /* itnim tag */
+ u16 rsvd;
+};
+
+struct bfi_itnim_prlo_event_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 itnim_tag; /* itnim tag */
+ u16 rsvd;
+};
+
+struct bfi_itnim_prlo_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 itnim_tag; /* itnim tag */
+ u16 rsvd;
+};
+
+/*
+ * Initiator mode IO interface defines.
+ */
+enum bfi_ioim_h2i {
+ BFI_IOIM_H2I_IOABORT_REQ = 1, /* IO abort request */
+ BFI_IOIM_H2I_IOCLEANUP_REQ = 2, /* IO cleanup request */
+};
+
+enum bfi_ioim_i2h {
+ BFI_IOIM_I2H_IO_RSP = BFA_I2HM(1), /* non-fp IO response */
+ BFI_IOIM_I2H_IOABORT_RSP = BFA_I2HM(2),/* ABORT rsp */
+};
+
+/**
+ * IO command DIF info
+ */
+struct bfi_ioim_dif_s {
+ u32 dif_info[4];
+};
+
+/**
+ * FCP IO messages overview
+ *
+ * @note
+ * - Max CDB length supported is 64 bytes.
+ * - SCSI Linked commands and SCSI bi-directional Commands not
+ * supported.
+ *
+ */
+struct bfi_ioim_req_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 io_tag; /* I/O tag */
+ u16 rport_hdl; /* itnim/rport firmware handle */
+ fcp_cmnd_t cmnd; /* IO request info */
+
+ /**
+ * SG elements array within the IO request must be double word
+ * aligned. This aligment is required to optimize SGM setup for the IO.
+ */
+ struct bfi_sge_s sges[BFI_SGE_INLINE_MAX];
+ u8 io_timeout;
+ u8 dif_en;
+ u8 rsvd_a[2];
+ struct bfi_ioim_dif_s dif;
+};
+
+/**
+ * This table shows various IO status codes from firmware and their
+ * meaning. Host driver can use these status codes to further process
+ * IO completions.
+ *
+ * BFI_IOIM_STS_OK : IO completed with error free SCSI &
+ * transport status.
+ * - io-tag can be reused.
+ *
+ * BFA_IOIM_STS_SCSI_ERR : IO completed with scsi error.
+ * - io-tag can be reused.
+ *
+ * BFI_IOIM_STS_HOST_ABORTED : IO was aborted successfully due to
+ * host request.
+ * - io-tag cannot be reused yet.
+ *
+ * BFI_IOIM_STS_ABORTED : IO was aborted successfully
+ * internally by f/w.
+ * - io-tag cannot be reused yet.
+ *
+ * BFI_IOIM_STS_TIMEDOUT : IO timedout and ABTS/RRQ is happening
+ * in the firmware and
+ * - io-tag cannot be reused yet.
+ *
+ * BFI_IOIM_STS_SQER_NEEDED : Firmware could not recover the IO
+ * with sequence level error
+ * logic and hence host needs to retry
+ * this IO with a different IO tag
+ * - io-tag cannot be used yet.
+ *
+ * BFI_IOIM_STS_NEXUS_ABORT : Second Level Error Recovery from host
+ * is required because 2 consecutive ABTS
+ * timedout and host needs logout and
+ * re-login with the target
+ * - io-tag cannot be used yet.
+ *
+ * BFI_IOIM_STS_UNDERRUN : IO completed with SCSI status good,
+ * but the data tranferred is less than
+ * the fcp data length in the command.
+ * ex. SCSI INQUIRY where transferred
+ * data length and residue count in FCP
+ * response accounts for total fcp-dl
+ * - io-tag can be reused.
+ *
+ * BFI_IOIM_STS_OVERRUN : IO completed with SCSI status good,
+ * but the data transerred is more than
+ * fcp data length in the command. ex.
+ * TAPE IOs where blocks can of unequal
+ * lengths.
+ * - io-tag can be reused.
+ *
+ * BFI_IOIM_STS_RES_FREE : Firmware has completed using io-tag
+ * during abort process
+ * - io-tag can be reused.
+ *
+ * BFI_IOIM_STS_PROTO_ERR : Firmware detected a protocol error.
+ * ex target sent more data than
+ * requested, or there was data frame
+ * loss and other reasons
+ * - io-tag cannot be used yet.
+ *
+ * BFI_IOIM_STS_DIF_ERR : Firwmare detected DIF error. ex: DIF
+ * CRC err or Ref Tag err or App tag err.
+ * - io-tag can be reused.
+ *
+ * BFA_IOIM_STS_TSK_MGT_ABORT : IO was aborted because of Task
+ * Management command from the host
+ * - io-tag can be reused.
+ *
+ * BFI_IOIM_STS_UTAG : Firmware does not know about this
+ * io_tag.
+ * - io-tag can be reused.
+ */
+enum bfi_ioim_status {
+ BFI_IOIM_STS_OK = 0,
+ BFI_IOIM_STS_HOST_ABORTED = 1,
+ BFI_IOIM_STS_ABORTED = 2,
+ BFI_IOIM_STS_TIMEDOUT = 3,
+ BFI_IOIM_STS_RES_FREE = 4,
+ BFI_IOIM_STS_SQER_NEEDED = 5,
+ BFI_IOIM_STS_PROTO_ERR = 6,
+ BFI_IOIM_STS_UTAG = 7,
+ BFI_IOIM_STS_PATHTOV = 8,
+};
+
+struct bfi_ioim_rsp_info_s {
+ u16 io_tag; /* completed IO tag */
+ u16 bfa_rport_hndl; /* releated rport handle */
+ u8 io_status; /* IO completion status */
+ u8 reuse_io_tag; /* IO tag can be reused */
+ u16 abort_tag; /* host abort request tag */
+};
+
+#define BFI_IOIM_RSP_PAD \
+ ((sizeof(fchs_t) - sizeof(struct bfi_mhdr_s) - \
+ sizeof(struct bfi_ioim_rsp_info_s)) / sizeof(u32))
+#define BFI_IOIM_SNSLEN (256)
+
+/**
+ * I/O response message
+ */
+struct bfi_ioim_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 io_tag; /* completed IO tag */
+ u16 bfa_rport_hndl; /* releated rport handle */
+ u8 io_status; /* IO completion status */
+ u8 reuse_io_tag; /* IO tag can be reused */
+ u16 abort_tag; /* host abort request tag */
+ u8 scsi_status; /* scsi status from target */
+ u8 sns_len; /* scsi sense length */
+ u8 resid_flags; /* IO residue flags */
+ u8 rsvd_a;
+ u32 residue; /* IO residual length in bytes */
+ u32 rsvd_b[3];
+};
+
+struct bfi_ioim_abort_req_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 io_tag; /* I/O tag */
+ u16 abort_tag; /* unique request tag */
+};
+
+/*
+ * Initiator mode task management command interface defines.
+ */
+
+enum bfi_tskim_h2i {
+ BFI_TSKIM_H2I_TM_REQ = 1, /* task-mgmt command */
+ BFI_TSKIM_H2I_ABORT_REQ = 2, /* task-mgmt command */
+};
+
+enum bfi_tskim_i2h {
+ BFI_TSKIM_I2H_TM_RSP = BFA_I2HM(1),
+};
+
+struct bfi_tskim_req_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 tsk_tag; /* task management tag */
+ u16 itn_fhdl; /* itn firmware handle */
+ lun_t lun; /* LU number */
+ u8 tm_flags; /* see fcp_tm_cmnd_t */
+ u8 t_secs; /* Timeout value in seconds */
+ u8 rsvd[2];
+};
+
+struct bfi_tskim_abortreq_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 tsk_tag; /* task management tag */
+ u16 rsvd;
+};
+
+enum bfi_tskim_status {
+ /*
+ * Following are FCP-4 spec defined status codes,
+ * **DO NOT CHANGE THEM **
+ */
+ BFI_TSKIM_STS_OK = 0,
+ BFI_TSKIM_STS_NOT_SUPP = 4,
+ BFI_TSKIM_STS_FAILED = 5,
+
+ /**
+ * Defined by BFA
+ */
+ BFI_TSKIM_STS_TIMEOUT = 10, /* TM request timedout */
+ BFI_TSKIM_STS_ABORTED = 11, /* Aborted on host request */
+};
+
+struct bfi_tskim_rsp_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 tsk_tag; /* task mgmt cmnd tag */
+ u8 tsk_status; /* @ref bfi_tskim_status */
+ u8 rsvd;
+};
+
+#pragma pack()
+
+#endif /* __BFI_FCPIM_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_fcxp.h patch/drivers/scsi/bfa/include/bfi/bfi_fcxp.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_fcxp.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_fcxp.h 2009-03-14 11:44:58.416130000 -0700
@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_FCXP_H__
+#define __BFI_FCXP_H__
+
+#include "bfi.h"
+
+#pragma pack(1)
+
+enum bfi_fcxp_h2i {
+ BFI_FCXP_H2I_SEND_REQ = 1,
+};
+
+enum bfi_fcxp_i2h {
+ BFI_FCXP_I2H_SEND_RSP = BFA_I2HM(1),
+};
+
+#define BFA_FCXP_MAX_SGES 2
+
+/**
+ * FCXP send request structure
+ */
+struct bfi_fcxp_send_req_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 fcxp_tag; /* driver request tag */
+ u16 max_frmsz; /* max send frame size */
+ u16 vf_id; /* vsan tag if applicable */
+ u16 rport_fw_hndl; /* FW Handle for the remote port */
+ u8 class; /* FC class used for req/rsp */
+ u8 rsp_timeout; /* timeout in secs, 0-no response */
+ u8 cts; /* continue sequence */
+ u8 rsvd;
+ fchs_t fchs; /* request FC header structure */
+ u32 req_len; /* request payload length */
+ u32 rsp_maxlen; /* max response length expected */
+ struct bfi_sge_s req_sge[BFA_FCXP_MAX_SGES]; /* request buf */
+ struct bfi_sge_s rsp_sge[BFA_FCXP_MAX_SGES]; /* response buf */
+};
+
+/**
+ * FCXP send response structure
+ */
+struct bfi_fcxp_send_rsp_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 fcxp_tag; /* send request tag */
+ u8 req_status; /* request status */
+ u8 rsvd;
+ u32 rsp_len; /* actual response length */
+ u32 residue_len; /* residual response length */
+ fchs_t fchs; /* response FC header structure */
+};
+
+#pragma pack()
+
+#endif /* __BFI_FCXP_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi.h patch/drivers/scsi/bfa/include/bfi/bfi.h
--- orig/drivers/scsi/bfa/include/bfi/bfi.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi.h 2009-03-14 11:44:58.387560000 -0700
@@ -0,0 +1,185 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_H__
+#define __BFI_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_status.h>
+
+#pragma pack(1)
+
+/**
+ * Msg header common to all msgs
+ */
+struct bfi_mhdr_s {
+ u8 msg_class; /* @ref bfi_mclass_t */
+ u8 msg_id; /* msg opcode with in the class */
+ union {
+ struct {
+ u8 rsvd;
+ u8 lpu_id; /* msg destination */
+ } h2i;
+ u16 i2htok; /* token in msgs to host */
+ } mtag;
+};
+
+#define bfi_h2i_set(_mh, _mc, _op, _lpuid) do { \
+ (_mh).msg_class = (_mc ); \
+ (_mh).msg_id = (_op ); \
+ (_mh).mtag.h2i.lpu_id = (_lpuid ); \
+ printk(" function: %s, Line %d event %d\n",__FUNCTION__, __LINE__, (_mh).msg_id ); \
+} while (0)
+
+#define bfi_i2h_set(_mh, _mc, _op, _i2htok) do { \
+ (_mh).msg_class = (_mc ); \
+ (_mh).msg_id = (_op ); \
+ (_mh).mtag.i2htok = (_i2htok ); \
+ fw_trc((_mh).msg_id ); \
+} while (0)
+
+/*
+ * Message opcodes: 0-127 to firmware, 128-255 to host
+ */
+#define BFI_I2H_OPCODE_BASE 128
+#define BFA_I2HM(_x) ((_x) + BFI_I2H_OPCODE_BASE)
+
+/**
+ ****************************************************************************
+ *
+ * Scatter Gather Element and Page definition
+ *
+ ****************************************************************************
+ */
+
+#define BFI_SGE_INLINE 1
+#define BFI_SGE_INLINE_MAX (BFI_SGE_INLINE + 1)
+
+/**
+ * SG Flags
+ */
+enum {
+ BFI_SGE_DATA = 0, /* data address, not last */
+ BFI_SGE_DATA_CPL = 1, /* data addr, last in current page */
+ BFI_SGE_DATA_LAST = 3, /* data address, last */
+ BFI_SGE_LINK = 2, /* link address */
+ BFI_SGE_PGDLEN = 2, /* cumulative data length for page */
+};
+
+/**
+ * DMA addresses
+ */
+union bfi_addr_u {
+ struct {
+ u32 addr_lo;
+ u32 addr_hi;
+ } a32;
+};
+
+/**
+ * Scatter Gather Element
+ */
+struct bfi_sge_s {
+#ifdef __BIGENDIAN
+ u32 flags : 2,
+ rsvd : 2,
+ sg_len : 28;
+#else
+ u32 sg_len : 28,
+ rsvd : 2,
+ flags : 2;
+#endif
+ union bfi_addr_u sga;
+};
+
+/**
+ * Scatter Gather Page
+ */
+#define BFI_SGPG_DATA_SGES 7
+#define BFI_SGPG_SGES_MAX (BFI_SGPG_DATA_SGES + 1)
+#define BFI_SGPG_RSVD_WD_LEN 8
+struct bfi_sgpg_s {
+ struct bfi_sge_s sges[BFI_SGPG_SGES_MAX];
+ u32 rsvd[BFI_SGPG_RSVD_WD_LEN];
+};
+
+/*
+ * Large Message structure - 128 Bytes size Msgs
+ */
+#define BFI_LMSG_SZ 128
+#define BFI_LMSG_PL_WSZ \
+ ((BFI_LMSG_SZ - sizeof(struct bfi_mhdr_s)) / 4)
+
+struct bfi_msg_s {
+ struct bfi_mhdr_s mhdr;
+ u32 pl[BFI_LMSG_PL_WSZ];
+};
+
+/**
+ * Mailbox message structure
+ */
+#define BFI_MBMSG_SZ 7
+struct bfi_mbmsg_s {
+ struct bfi_mhdr_s mh;
+ u32 pl[BFI_MBMSG_SZ];
+};
+
+/**
+ * Message Classes
+ */
+enum bfi_mclass {
+ BFI_MC_IOC = 1, /* IO Controller (IOC) */
+ BFI_MC_DIAG = 2, /* Diagnostic Msgs */
+ BFI_MC_FLASH = 3, /* Flash message class */
+ BFI_MC_CEE = 4,
+ BFI_MC_FC_PORT = 5, /* FC port */
+ BFI_MC_IOCFC = 6, /* FC - IO Controller (IOC) */
+ BFI_MC_LL = 7, /* Link Layer */
+ BFI_MC_UF = 8, /* Unsolicited frame receive */
+ BFI_MC_FCXP = 9, /* FC Transport */
+ BFI_MC_LPS = 10, /* lport fc login services */
+ BFI_MC_RPORT = 11, /* Remote port */
+ BFI_MC_ITNIM = 12, /* I-T nexus (Initiator mode) */
+ BFI_MC_IOIM_READ = 13, /* read IO (Initiator mode) */
+ BFI_MC_IOIM_WRITE = 14, /* write IO (Initiator mode) */
+ BFI_MC_IOIM_IO = 15, /* IO (Initiator mode) */
+ BFI_MC_IOIM = 16, /* IO (Initiator mode) */
+ BFI_MC_IOIM_IOCOM = 17, /* good IO completion */
+ BFI_MC_TSKIM = 18, /* Initiator Task management */
+ BFI_MC_SBOOT = 19, /* SAN boot services */
+ BFI_MC_IPFC = 20, /* IP over FC Msgs */
+ BFI_MC_FABRIC = 21, /* fabric services */
+ BFI_MC_LPORT = 22, /* logical port services */
+ BFI_MC_ITNTM = 23, /* I-T nexus (Target mode) */
+ BFI_MC_IOTM_READ = 24, /* read IO (Target mode) */
+ BFI_MC_IOTM_WRITE = 25, /* write IO (Target mode) */
+ BFI_MC_IOTM_IO = 26, /* IO (Target mode) */
+ BFI_MC_IOTM_IOCOM = 27, /* Good IO completion (Tgt Mode) */
+ BFI_MC_IOTM = 28, /* IO (Target mode) */
+ BFI_MC_TSKTM = 29, /* Target Task management */
+ BFI_MC_SB = 30, /* Single Byte Command Code Set */
+ BFI_MC_VPORT = 31,
+ BFI_MC_MAX = 32,
+};
+
+#define BFI_IOC_MAX_CQS 4
+#define BFI_IOC_MSGLEN_MAX 32 /* 32 bytes */
+
+#pragma pack()
+
+#endif /* __BFI_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_iocfc.h patch/drivers/scsi/bfa/include/bfi/bfi_iocfc.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_iocfc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_iocfc.h 2009-03-14 11:44:58.430981000 -0700
@@ -0,0 +1,151 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_IOCFC_H__
+#define __BFI_IOCFC_H__
+
+#include "bfi.h"
+#include <defs/bfa_defs_ioc.h>
+#include <defs/bfa_defs_iocfc.h>
+#include <defs/bfa_defs_port.h>
+
+#pragma pack(1)
+
+enum bfi_iocfc_h2i_msgs {
+ BFI_IOCFC_H2I_CFG_REQ = 1,
+ BFI_IOCFC_H2I_GET_STATS_REQ = 2,
+ BFI_IOCFC_H2I_CLEAR_STATS_REQ = 3,
+ BFI_IOCFC_H2I_SET_INTR_REQ = 4,
+};
+
+enum bfi_iocfc_i2h_msgs {
+ BFI_IOCFC_I2H_CFG_REPLY = BFA_I2HM(1),
+ BFI_IOCFC_I2H_GET_STATS_RSP = BFA_I2HM(2),
+ BFI_IOCFC_I2H_CLEAR_STATS_RSP = BFA_I2HM(3),
+};
+
+struct bfi_iocfc_cfg_s {
+ u8 num_cqs; /* Number of CQs to be used */
+ u8 sense_buf_len; /* SCSI sense length */
+ u8 trunk_enabled; /* port trunking enabled */
+ u8 trunk_ports; /* trunk ports bit map */
+ u8 fw_disc_enabled;/*
+ * f/w device discovery mode
+ * 1 - f/w disc enabled
+ * 0 - f/w disc not enabled
+ */
+ u8 rport_del_tov; /* rport delete timeout in secs */
+ u8 bport_role; /* base port operating mode */
+ u8 rsvd;
+ u8 bport_sym_name[BFA_SYMNAME_MAXLEN];/* bport symbolic name */
+ u32 endian_sig; /* endian signature of host */
+
+ /**
+ * Request and response circular queue base addresses, size and
+ * shadow index pointers.
+ */
+ union bfi_addr_u req_cq_ba[BFI_IOC_MAX_CQS];
+ union bfi_addr_u req_shadow_ci[BFI_IOC_MAX_CQS];
+ u16 req_cq_elems[BFI_IOC_MAX_CQS];
+ union bfi_addr_u rsp_cq_ba[BFI_IOC_MAX_CQS];
+ union bfi_addr_u rsp_shadow_pi[BFI_IOC_MAX_CQS];
+ u16 rsp_cq_elems[BFI_IOC_MAX_CQS];
+
+ union bfi_addr_u stats_addr; /* DMA-able address for stats */
+ union bfi_addr_u cfgrsp_addr; /* config response dma address */
+ union bfi_addr_u ioim_snsbase; /* IO sense buffer base address */
+ struct bfa_iocfc_intr_attr_s intr_attr; /* IOC interrupt attributes */
+};
+
+struct bfi_iocfc_cfgrsp_s {
+ struct bfa_iocfc_fwcfg_s fwcfg;
+ struct bfa_iocfc_intr_attr_s intr_attr;
+};
+
+/**
+ * BFI_IOCFC_H2I_CFG_REQ message
+ */
+struct bfi_iocfc_cfg_req_s {
+ struct bfi_mhdr_s mh;
+ union bfi_addr_u ioc_cfg_dma_addr;
+};
+
+/**
+ * BFI_IOCFC_I2H_CFG_REPLY message
+ */
+struct bfi_iocfc_cfg_reply_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u8 cfg_success; /* cfg reply status */
+ u8 lpu_bm; /* LPUs assigned for this IOC */
+ u8 rsvd[2];
+};
+
+/**
+ * BFI_IOCFC_H2I_GET_STATS_REQ & BFI_IOCFC_H2I_CLEAR_STATS_REQ messages
+ */
+struct bfi_iocfc_stats_req_s {
+ struct bfi_mhdr_s mh; /* msg header */
+ u32 msgtag; /* msgtag for reply */
+};
+
+/**
+ * BFI_IOCFC_I2H_GET_STATS_RSP & BFI_IOCFC_I2H_CLEAR_STATS_RSP messages
+ */
+struct bfi_iocfc_stats_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 status; /* reply status */
+ u8 rsvd[3];
+ u32 msgtag; /* msgtag for reply */
+};
+
+/**
+ * BFI_IOCFC_H2I_SET_INTR_REQ message
+ */
+struct bfi_iocfc_set_intr_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 coalesce; /* enable intr coalescing*/
+ u8 rsvd[3];
+ u16 delay; /* delay timer 0..1125us */
+ u16 latency; /* latency timer 0..225us */
+};
+
+/**
+ * H2I Messages
+ */
+union bfi_iocfc_h2i_msg_u {
+ struct bfi_mhdr_s mh;
+ struct bfi_iocfc_cfg_req_s cfg_req;
+ struct bfi_iocfc_stats_req_s stats_get;
+ struct bfi_iocfc_stats_req_s stats_clr;
+ u32 mboxmsg[BFI_IOC_MSGSZ];
+};
+
+/**
+ * I2H Messages
+ */
+union bfi_iocfc_i2h_msg_u {
+ struct bfi_mhdr_s mh;
+ struct bfi_iocfc_cfg_reply_s cfg_reply;
+ struct bfi_iocfc_stats_rsp_s stats_get_rsp;
+ struct bfi_iocfc_stats_rsp_s stats_clr_rsp;
+ u32 mboxmsg[BFI_IOC_MSGSZ];
+};
+
+#pragma pack()
+
+#endif /* __BFI_IOCFC_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_ioc.h patch/drivers/scsi/bfa/include/bfi/bfi_ioc.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_ioc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_ioc.h 2009-03-14 11:44:58.422986000 -0700
@@ -0,0 +1,193 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_IOC_H__
+#define __BFI_IOC_H__
+
+#include "bfi.h"
+#include <defs/bfa_defs_ioc.h>
+
+#pragma pack(1)
+
+enum bfi_ioc_h2i_msgs {
+ BFI_IOC_H2I_ENABLE_REQ = 1,
+ BFI_IOC_H2I_DISABLE_REQ = 2,
+ BFI_IOC_H2I_GETATTR_REQ = 3,
+ BFI_IOC_H2I_DBG_SYNC = 4,
+ BFI_IOC_H2I_DBG_DUMP = 5,
+};
+
+enum bfi_ioc_i2h_msgs {
+ BFI_IOC_I2H_ENABLE_REPLY = BFA_I2HM(1),
+ BFI_IOC_I2H_DISABLE_REPLY = BFA_I2HM(2),
+ BFI_IOC_I2H_GETATTR_REPLY = BFA_I2HM(3),
+ BFI_IOC_I2H_READY_EVENT = BFA_I2HM(4),
+};
+
+/**
+ * BFI_IOC_H2I_GETATTR_REQ message
+ */
+struct bfi_ioc_getattr_req_s {
+ struct bfi_mhdr_s mh;
+ union bfi_addr_u attr_addr;
+};
+
+struct bfi_ioc_attr_s {
+ wwn_t mfg_wwn;
+ mac_t mfg_mac;
+ u16 rsvd_a;
+ char brcd_serialnum[STRSZ(BFA_MFG_SERIALNUM_SIZE)];
+ u8 pcie_gen;
+ u8 pcie_lanes_orig;
+ u8 pcie_lanes;
+ u8 rx_bbcredit; /* receive buffer credits */
+ u32 adapter_prop; /* adapter properties */
+ u16 maxfrsize; /* max receive frame size */
+ char asic_rev;
+ u8 rsvd_b;
+ char fw_version[BFA_VERSION_LEN];
+ char optrom_version[BFA_VERSION_LEN];
+ struct bfa_mfg_vpd_s vpd;
+};
+
+/**
+ * BFI_IOC_I2H_GETATTR_REPLY message
+ */
+struct bfi_ioc_getattr_reply_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u8 status; /* cfg reply status */
+ u8 rsvd[3];
+};
+
+/**
+ * Firmware memory page offsets
+ */
+#define BFI_IOC_SMEM_PG0_CB (0x40)
+#define BFI_IOC_SMEM_PG0_CT (0x180)
+
+/**
+ * Firmware trace offset
+ */
+#define BFI_IOC_TRC_OFF (0x4b00)
+#define BFI_IOC_TRC_ENTS 128
+
+#define BFI_IOC_FW_SIGNATURE (0xbfadbfad)
+struct bfi_ioc_image_hdr_s {
+ u32 signature; /* constant signature */
+ u32 cksum; /* firmware checksum */
+ u32 exec; /* exec vector */
+ u32 param; /* parameters */
+};
+
+/**
+ * BFI_IOC_I2H_READY_EVENT message
+ */
+struct bfi_ioc_rdy_event_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 init_status; /* init event status */
+ u8 rsvd[3];
+};
+
+/**
+ * IOC hardware/firmware state
+ */
+enum bfi_ioc_state {
+ BFI_IOC_UNINIT = 0, /* not initialized */
+ BFI_IOC_INITING = 1, /* h/w is being initialized */
+ BFI_IOC_HWINIT = 2, /* h/w is initialized */
+ BFI_IOC_CFG = 3, /* IOC configuration in progress */
+ BFI_IOC_OP = 4, /* IOC is operational */
+ BFI_IOC_DISABLING = 5, /* IOC is being disabled */
+ BFI_IOC_DISABLED = 6, /* IOC is disabled */
+ BFI_IOC_CFG_DISABLED = 7, /* IOC is being disabled;transient */
+ BFI_IOC_HBFAIL = 8, /* IOC heart-beat failure */
+ BFI_IOC_MEMTEST = 9, /* IOC is doing memtest */
+};
+
+#define BFI_IOC_ENDIAN_SIG 0x12345678
+
+enum {
+ BFI_ADAPTER_TYPE_FC = 0x01, /* FC adapters */
+ BFI_ADAPTER_TYPE_MK = 0x0f0000, /* adapter type mask */
+ BFI_ADAPTER_TYPE_SH = 16, /* adapter type shift */
+ BFI_ADAPTER_NPORTS_MK = 0xff00, /* number of ports mask */
+ BFI_ADAPTER_NPORTS_SH = 8, /* number of ports shift */
+ BFI_ADAPTER_SPEED_MK = 0xff, /* adapter speed mask */
+ BFI_ADAPTER_SPEED_SH = 0, /* adapter speed shift */
+ BFI_ADAPTER_PROTO = 0x100000, /* prototype adapaters */
+ BFI_ADAPTER_TTV = 0x200000, /* TTV debug capable */
+ BFI_ADAPTER_UNSUPP = 0x400000, /* unknown adapter type */
+};
+
+#define BFI_ADAPTER_GETP(__prop,__adap_prop) \
+ (((__adap_prop) & BFI_ADAPTER_ ## __prop ## _MK) >> \
+ BFI_ADAPTER_ ## __prop ## _SH)
+#define BFI_ADAPTER_SETP(__prop, __val) \
+ ((__val) << BFI_ADAPTER_ ## __prop ## _SH)
+#define BFI_ADAPTER_IS_PROTO(__adap_type) \
+ ((__adap_type) & BFI_ADAPTER_PROTO)
+#define BFI_ADAPTER_IS_TTV(__adap_type) \
+ ((__adap_type) & BFI_ADAPTER_TTV)
+#define BFI_ADAPTER_IS_UNSUPP(__adap_type) \
+ ((__adap_type) & BFI_ADAPTER_UNSUPP)
+#define BFI_ADAPTER_IS_SPECIAL(__adap_type) \
+ ((__adap_type) & (BFI_ADAPTER_TTV | BFI_ADAPTER_PROTO | \
+ BFI_ADAPTER_UNSUPP))
+
+/**
+ * BFI_IOC_H2I_ENABLE_REQ & BFI_IOC_H2I_DISABLE_REQ messages
+ */
+struct bfi_ioc_ctrl_req_s {
+ struct bfi_mhdr_s mh;
+ u8 ioc_class;
+ u8 rsvd[3];
+};
+
+/**
+ * BFI_IOC_I2H_ENABLE_REPLY & BFI_IOC_I2H_DISABLE_REPLY messages
+ */
+struct bfi_ioc_ctrl_reply_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u8 status; /* enable/disable status */
+ u8 rsvd[3];
+};
+
+#define BFI_IOC_MSGSZ 8
+/**
+ * H2I Messages
+ */
+union bfi_ioc_h2i_msg_u {
+ struct bfi_mhdr_s mh;
+ struct bfi_ioc_ctrl_req_s enable_req;
+ struct bfi_ioc_ctrl_req_s disable_req;
+ struct bfi_ioc_getattr_req_s getattr_req;
+ u32 mboxmsg[BFI_IOC_MSGSZ];
+};
+
+/**
+ * I2H Messages
+ */
+union bfi_ioc_i2h_msg_u {
+ struct bfi_mhdr_s mh;
+ struct bfi_ioc_rdy_event_s rdy_event;
+ u32 mboxmsg[BFI_IOC_MSGSZ];
+};
+
+#pragma pack()
+
+#endif /* __BFI_IOC_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_lport.h patch/drivers/scsi/bfa/include/bfi/bfi_lport.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_lport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_lport.h 2009-03-14 11:44:58.459050000 -0700
@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_LPORT_H__
+#define __BFI_LPORT_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_port.h>
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+/*
+enum bfi_lport_h2i_msgs {
+};
+*/
+
+enum bfi_lport_i2h_msgs {
+ BFI_LPORT_I2H_EVENT = BFA_I2HM(1)
+};
+
+enum bfi_lport_state_e {
+ BFI_LPORT_ONLINE = 1,
+ BFI_LPORT_OFFLINE = 2,
+ BFI_LPORT_DELETE = 3
+};
+
+struct bfi_lport_event_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u32 pid:24,
+ lport_state:8; /* see bfi_lport_state */
+ u16 fabric_tag;
+ u16 lport_tag;
+};
+
+union bfi_lport_h2i_msg_u {
+ struct bfi_msg_s *msg;
+};
+
+union bfi_lport_i2h_msg_u {
+ struct bfi_msg_s *msg;
+ struct bfi_lport_event_s *event;
+};
+
+struct bfi_lport_cfg_s {
+ wwn_t pwwn; /* port wwn */
+ wwn_t nwwn; /* node wwn */
+ u8 roles; /* port roles - see bfa_port_role */
+ u8 rsvd[3];
+};
+
+#define BFI_LPORT_PSNLEN (128) /* Length of Port Symbolic Name */
+
+#pragma pack()
+
+#endif /* __BFI_LPORT_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_lps.h patch/drivers/scsi/bfa/include/bfi/bfi_lps.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_lps.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_lps.h 2009-03-14 11:44:58.487410000 -0700
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_LPS_H__
+#define __BFI_LPS_H__
+
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+enum bfi_lps_h2i_msgs {
+ BFI_LPS_H2I_LOGIN_REQ = 1,
+ BFI_LPS_H2I_LOGOUT_REQ = 2,
+};
+
+enum bfi_lps_i2h_msgs {
+ BFI_LPS_H2I_LOGIN_RSP = BFA_I2HM(1),
+ BFI_LPS_H2I_LOGOUT_RSP = BFA_I2HM(2),
+};
+
+struct bfi_lps_login_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 lp_tag;
+ u8 alpa;
+ u16 pdu_size;
+ wwn_t pwwn;
+ wwn_t nwwn;
+ u8 fdisc;
+ u8 auth_en;
+ u8 rsvd[2];
+};
+
+struct bfi_lps_login_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 lp_tag;
+ u8 status;
+ u8 lsrjt_rsn;
+ u8 lsrjt_expl;
+ u16 bb_credit;
+ u8 f_port;
+ u8 npiv_en;
+ u32 lp_pid : 24;
+ u32 auth_req : 8;
+ wwn_t port_name;
+ wwn_t node_name;
+ mac_t lp_mac;
+ mac_t fcf_mac;
+};
+
+struct bfi_lps_logout_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 lp_tag;
+ u8 rsvd[3];
+ wwn_t port_name;
+};
+
+struct bfi_lps_logout_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 lp_tag;
+ u8 status;
+ u8 rsvd[2];
+};
+
+union bfi_lps_h2i_msg_u {
+ struct bfi_mhdr_s *msg;
+ struct bfi_lps_login_req_s *login_req;
+ struct bfi_lps_logout_req_s *logout_req;
+};
+
+union bfi_lps_i2h_msg_u {
+ struct bfi_msg_s *msg;
+ struct bfi_lps_login_rsp_s *login_rsp;
+ struct bfi_lps_logout_rsp_s *logout_rsp;
+};
+
+#pragma pack()
+
+#endif /* __BFI_LPS_H__ */
+
+
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_pport.h patch/drivers/scsi/bfa/include/bfi/bfi_pport.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_pport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_pport.h 2009-03-14 11:44:58.494552000 -0700
@@ -0,0 +1,184 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFI_PPORT_H__
+#define __BFI_PPORT_H__
+
+#include <bfi/bfi.h>
+#include <defs/bfa_defs_pport.h>
+
+#pragma pack(1)
+
+enum bfi_pport_h2i {
+ BFI_PPORT_H2I_ENABLE_REQ = (1),
+ BFI_PPORT_H2I_DISABLE_REQ = (2),
+ BFI_PPORT_H2I_GET_STATS_REQ = (3),
+ BFI_PPORT_H2I_CLEAR_STATS_REQ = (4),
+ BFI_PPORT_H2I_SET_SVC_PARAMS_REQ = (5),
+ BFI_PPORT_H2I_ENABLE_RX_VF_TAG_REQ = (6),
+ BFI_PPORT_H2I_ENABLE_TX_VF_TAG_REQ = (7),
+ BFI_PPORT_H2I_GET_QOS_STATS_REQ = (8),
+ BFI_PPORT_H2I_CLEAR_QOS_STATS_REQ = (9),
+};
+
+enum bfi_pport_i2h {
+ BFI_PPORT_I2H_ENABLE_RSP = BFA_I2HM(1),
+ BFI_PPORT_I2H_DISABLE_RSP = BFA_I2HM(2),
+ BFI_PPORT_I2H_GET_STATS_RSP = BFA_I2HM(3),
+ BFI_PPORT_I2H_CLEAR_STATS_RSP = BFA_I2HM(4),
+ BFI_PPORT_I2H_SET_SVC_PARAMS_RSP = BFA_I2HM(5),
+ BFI_PPORT_I2H_ENABLE_RX_VF_TAG_RSP = BFA_I2HM(6),
+ BFI_PPORT_I2H_ENABLE_TX_VF_TAG_RSP = BFA_I2HM(7),
+ BFI_PPORT_I2H_EVENT = BFA_I2HM(8),
+ BFI_PPORT_I2H_GET_QOS_STATS_RSP = BFA_I2HM(9),
+ BFI_PPORT_I2H_CLEAR_QOS_STATS_RSP = BFA_I2HM(10),
+};
+
+/**
+ * Generic REQ type
+ */
+struct bfi_pport_generic_req_s {
+ struct bfi_mhdr_s mh; /* msg header */
+ u32 msgtag; /* msgtag for reply */
+};
+
+/**
+ * Generic RSP type
+ */
+struct bfi_pport_generic_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 status; /* port enable status */
+ u8 rsvd[3];
+ u32 msgtag; /* msgtag for reply */
+};
+
+/**
+ * BFI_PPORT_H2I_ENABLE_REQ
+ */
+struct bfi_pport_enable_req_s {
+ struct bfi_mhdr_s mh; /* msg header */
+ u32 rsvd1;
+ wwn_t nwwn; /* node wwn of physical port */
+ wwn_t pwwn; /* port wwn of physical port */
+ struct bfa_pport_cfg_s port_cfg; /* port configuration */
+ union bfi_addr_u stats_dma_addr; /* DMA address for stats */
+ u32 msgtag; /* msgtag for reply */
+ u32 rsvd2;
+};
+
+/**
+ * BFI_PPORT_I2H_ENABLE_RSP
+ */
+#define bfi_pport_enable_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_DISABLE_REQ
+ */
+#define bfi_pport_disable_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_I2H_DISABLE_RSP
+ */
+#define bfi_pport_disable_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_GET_STATS_REQ
+ */
+#define bfi_pport_get_stats_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_I2H_GET_STATS_RSP
+ */
+#define bfi_pport_get_stats_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_CLEAR_STATS_REQ
+ */
+#define bfi_pport_clear_stats_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_I2H_CLEAR_STATS_RSP
+ */
+#define bfi_pport_clear_stats_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_GET_QOS_STATS_REQ
+ */
+#define bfi_pport_get_qos_stats_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_H2I_GET_QOS_STATS_RSP
+ */
+#define bfi_pport_get_qos_stats_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_CLEAR_QOS_STATS_REQ
+ */
+#define bfi_pport_clear_qos_stats_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_H2I_CLEAR_QOS_STATS_RSP
+ */
+#define bfi_pport_clear_qos_stats_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_SET_SVC_PARAMS_REQ
+ */
+struct bfi_pport_set_svc_params_req_s {
+ struct bfi_mhdr_s mh; /* msg header */
+ u16 tx_bbcredit; /* Tx credits */
+ u16 rsvd;
+};
+
+/**
+ * BFI_PPORT_I2H_SET_SVC_PARAMS_RSP
+ */
+
+/**
+ * BFI_PPORT_I2H_EVENT
+ */
+struct bfi_pport_event_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ struct bfa_pport_link_s link_state;
+};
+
+union bfi_pport_h2i_msg_u {
+ struct bfi_mhdr_s *mhdr;
+ struct bfi_pport_enable_req_s *penable;
+ struct bfi_pport_generic_req_s *pdisable;
+ struct bfi_pport_generic_req_s *pgetstats;
+ struct bfi_pport_generic_req_s *pclearstats;
+ struct bfi_pport_set_svc_params_req_s *psetsvcparams;
+ struct bfi_pport_get_qos_stats_req_s *pgetqosstats;
+ struct bfi_pport_generic_req_s *pclearqosstats;
+};
+
+union bfi_pport_i2h_msg_u {
+ struct bfi_msg_s *msg;
+ struct bfi_pport_generic_rsp_s *enable_rsp;
+ struct bfi_pport_disable_rsp_s *disable_rsp;
+ struct bfi_pport_generic_rsp_s *getstats_rsp;
+ struct bfi_pport_clear_stats_rsp_s *clearstats_rsp;
+ struct bfi_pport_set_svc_params_rsp_s *setsvcparasm_rsp;
+ struct bfi_pport_get_qos_stats_rsp_s *getqosstats_rsp;
+ struct bfi_pport_clear_qos_stats_rsp_s *clearqosstats_rsp;
+ struct bfi_pport_event_s *event;
+};
+
+#pragma pack()
+
+#endif /* __BFI_PPORT_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_rport.h patch/drivers/scsi/bfa/include/bfi/bfi_rport.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_rport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_rport.h 2009-03-14 11:44:58.438337000 -0700
@@ -0,0 +1,177 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_RPORT_H__
+#define __BFI_RPORT_H__
+
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+enum bfi_rport_h2i_msgs {
+ BFI_RPORT_H2I_CREATE_REQ = 1,
+ BFI_RPORT_H2I_DELETE_REQ = 2,
+ BFI_RPORT_H2I_SET_SPEED_REQ = 3,
+
+ /*
+ * These following messages are added as part of FCS
+ * functionality in f/w
+ */
+ BFI_RPORT_H2I_OFFLINE_RSP = 4,
+};
+
+enum bfi_rport_i2h_msgs {
+ BFI_RPORT_I2H_CREATE_RSP = BFA_I2HM(1),
+ BFI_RPORT_I2H_DELETE_RSP = BFA_I2HM(2),
+ BFI_RPORT_I2H_QOS_SCN = BFA_I2HM(3),
+
+ /*
+ * These following messages are added as part of FCS
+ * functionality in f/w
+ */
+ BFI_RPORT_I2H_ADD = BFA_I2HM(4),
+ BFI_RPORT_I2H_REMOVE = BFA_I2HM(5),
+ BFI_RPORT_I2H_OFFLINE = BFA_I2HM(6),
+ BFI_RPORT_I2H_ONLINE = BFA_I2HM(7),
+
+};
+
+struct bfi_rport_create_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 rport_tag; /* rport tag */
+ u16 max_frmsz; /* max rcv pdu size */
+ u32 pid : 24, /* remote port ID */
+ lp_tag : 8; /* local port tag */
+ u32 local_pid : 24, /* local port ID */
+ cisc : 8;
+ u8 fc_class; /* supported FC classes */
+ u8 vf_en; /* virtual fabric enable */
+ u16 vf_id; /* virtual fabric ID */
+};
+
+struct bfi_rport_create_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 status; /* rport creation status */
+ u8 rsvd[1];
+ u16 rport_tag; /* rport tag */
+ struct bfa_rport_qos_attr_s qos_attr; /* QoS Attributes */
+};
+
+struct bfi_rport_speed_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 rport_tag; /* rport tag */
+ u8 speed; /* rport's speed via RPSC */
+ u8 rsvd;
+};
+
+struct bfi_rport_delete_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 rport_tag; /* rport tag */
+ u16 rsvd;
+};
+
+struct bfi_rport_offline_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 rport_tag; /* rport tag */
+ u16 rsvd;
+};
+
+struct bfi_rport_delete_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 rport_tag; /* rport tag */
+ u8 status; /* rport deletion status */
+ u8 rsvd;
+};
+
+struct bfi_rport_qos_scn_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 rport_tag; /* rport tag */
+ u16 rsvd;
+ struct bfa_rport_qos_attr_s old_qos_attr; /* Old QoS Attributes */
+ struct bfa_rport_qos_attr_s new_qos_attr; /* New QoS Attributes */
+};
+
+union bfi_rport_h2i_msg_u {
+ struct bfi_msg_s *msg;
+ struct bfi_rport_create_req_s *create_req;
+ struct bfi_rport_delete_req_s *delete_req;
+ struct bfi_rport_speed_req_s *speed_req;
+ struct bfi_rport_offline_rsp_s *offline_rsp;
+};
+
+union bfi_rport_i2h_msg_u {
+ struct bfi_msg_s *msg;
+ struct bfi_rport_create_rsp_s *create_rsp;
+ struct bfi_rport_delete_rsp_s *delete_rsp;
+ struct bfi_rport_qos_scn_s *qos_scn_evt;
+
+ /**
+ * FCS functionality related messages
+ */
+ struct bfi_rport_add_s *add;
+ struct bfi_rport_remove_s *remove;
+ struct bfi_rport_offline_s *offline;
+ struct bfi_rport_online_s *online;
+};
+
+
+/**
+ * Message structures for Rport Add,Remove,offline & online from firmware to BFA
+ * Note: These messages do not have corresponding responses from BFA to f/w.
+ */
+struct bfi_rport_add_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ wwn_t pwwn; /* rport pwwn */
+ wwn_t nwwn; /* rport pwwn */
+ u32 rpid : 24, /* remote port ID */
+ lport_tag : 8; /* parent lport's tag */
+ u32 local_pid : 24, /* local port ID */
+ cisc : 8;
+ u16 rport_tag; /* rport tag */
+ u16 max_frmsz; /* max rcv pdu size */
+ u16 vf_id; /* virtual fabric ID */
+ u8 type; /* rport type - ob/ib */
+ u8 fc_class; /* supported FC classes */
+ u8 vf_en; /* virtual fabric enable */
+ u8 rpsc_speed; /* rpsc rport speed */
+ u8 assigned_speed; /* assigned rport speed */
+ u8 scsi_function; /* scsi function */
+};
+
+struct bfi_rport_remove_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 rport_tag; /* rport tag */
+ u16 rsvd;
+};
+
+struct bfi_rport_offline_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 rport_tag; /* rport tag */
+ u16 rsvd;
+};
+
+struct bfi_rport_online_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 rport_tag; /* rport tag */
+ u16 rsvd;
+};
+
+
+#pragma pack()
+
+#endif /* __BFI_RPORT_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_uf.h patch/drivers/scsi/bfa/include/bfi/bfi_uf.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_uf.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_uf.h 2009-03-14 11:44:58.445144000 -0700
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_UF_H__
+#define __BFI_UF_H__
+
+#include "bfi.h"
+
+#pragma pack(1)
+
+enum bfi_uf_h2i {
+ BFI_UF_H2I_BUF_POST = 1,
+};
+
+enum bfi_uf_i2h {
+ BFI_UF_I2H_FRM_RCVD = BFA_I2HM(1),
+};
+
+#define BFA_UF_MAX_SGES 2
+
+struct bfi_uf_buf_post_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 buf_tag; /* buffer tag */
+ u16 buf_len; /* total buffer length */
+ struct bfi_sge_s sge[BFA_UF_MAX_SGES]; /* buffer DMA SGEs */
+};
+
+struct bfi_uf_frm_rcvd_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 buf_tag; /* buffer tag */
+ u16 rsvd;
+ u16 frm_len; /* received frame length */
+ u16 xfr_len; /* tranferred length */
+};
+
+#pragma pack()
+
+#endif /* __BFI_UF_H__ */
diff -urpN orig/drivers/scsi/bfa/include/bfi/bfi_vport.h patch/drivers/scsi/bfa/include/bfi/bfi_vport.h
--- orig/drivers/scsi/bfa/include/bfi/bfi_vport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/bfi/bfi_vport.h 2009-03-14 11:44:58.480893000 -0700
@@ -0,0 +1,67 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_VPORT_H__
+#define __BFI_VPORT_H__
+
+#include <bfi/bfi.h>
+#include <bfi/bfi_lport.h>
+
+#pragma pack(1)
+
+enum bfi_vport_h2i_msgs {
+ BFI_VPORT_H2I_CREATE_REQ = 1,
+ BFI_VPORT_H2I_DELETE_REQ = 2,
+};
+
+enum bfi_vport_i2h_msgs {
+ BFI_VPORT_I2H_DELETE_RSP = BFA_I2HM(1)
+};
+
+struct bfi_vport_create_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ union bfi_addr_u psn_addr; /* port symbolic name addr */
+ u16 fabric_tag; /* fabric tag */
+ u16 vport_tag; /* vport tag */
+ struct bfi_lport_cfg_s lport_cfg; /* lport config */
+};
+
+struct bfi_vport_delete_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 fabric_tag; /* fabric tag */
+ u16 vport_tag; /* vport tag */
+};
+
+union bfi_vport_h2i_msg_u {
+ struct bfi_msg_s *msg;
+ struct bfi_vport_create_req_s *create_req;
+ struct bfi_vport_delete_req_s *delete_req;
+};
+
+struct bfi_vport_delete_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 fabric_tag; /* fabric tag */
+ u16 vport_tag; /* vport tag */
+ u8 status; /* vport deletion status */
+ u8 rsvd[3];
+};
+
+union bfi_vport_i2h_msg_u {
+ struct bfi_msg_s *msg;
+ struct bfi_vport_delete_rsp_s *delete_rsp;
+};
+#endif
diff -urpN orig/drivers/scsi/bfa/include/cna/pstats/ethport_defs.h patch/drivers/scsi/bfa/include/cna/pstats/ethport_defs.h
--- orig/drivers/scsi/bfa/include/cna/pstats/ethport_defs.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cna/pstats/ethport_defs.h 2009-03-14 11:44:58.618381000 -0700
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2006-2008 Brocade Communications Systems, Inc.
+ * All rights reserved.
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __ETHPORT_DEFS_H__
+#define __ETHPORT_DEFS_H__
+
+struct bnad_drv_stats {
+ u64 netif_queue_stop;
+ u64 netif_queue_wakeup;
+ u64 tso4;
+ u64 tso6;
+ u64 tso_err;
+ u64 tcpcsum_offload;
+ u64 udpcsum_offload;
+ u64 csum_help;
+ u64 csum_help_err;
+
+ u64 hw_stats_updates;
+ u64 netif_rx_schedule;
+ u64 netif_rx_complete;
+ u64 netif_rx_dropped;
+};
+#endif
diff -urpN orig/drivers/scsi/bfa/include/cna/pstats/phyport_defs.h patch/drivers/scsi/bfa/include/cna/pstats/phyport_defs.h
--- orig/drivers/scsi/bfa/include/cna/pstats/phyport_defs.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cna/pstats/phyport_defs.h 2009-03-14 11:44:58.611165000 -0700
@@ -0,0 +1,212 @@
+/*
+ * Copyright (c) 2006-2008 Brocade Communications Systems, Inc.
+ * All rights reserved.
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __PHYPORT_DEFS_H__
+#define __PHYPORT_DEFS_H__
+
+#define BNA_TXF_ID_MAX 64
+#define BNA_RXF_ID_MAX 64
+
+/* Statistics */
+
+/* TxF Frame Statistics */
+struct bna_stats_txf
+{
+ u64 ucast_octets;
+ u64 ucast;
+ u64 ucast_vlan;
+
+ u64 mcast_octets;
+ u64 mcast;
+ u64 mcast_vlan;
+
+ u64 bcast_octets;
+ u64 bcast;
+ u64 bcast_vlan;
+
+ u64 errors;
+ u64 filter_vlan; /* frames filtered due to VLAN */
+ u64 filter_mac_sa; /* frames filtered due to SA check */
+};
+
+
+/* RxF Frame Statistics */
+struct bna_stats_rxf
+{
+ u64 ucast_octets;
+ u64 ucast;
+ u64 ucast_vlan;
+
+ u64 mcast_octets;
+ u64 mcast;
+ u64 mcast_vlan;
+
+ u64 bcast_octets;
+ u64 bcast;
+ u64 bcast_vlan;
+ u64 frame_drops;
+};
+
+
+/* FC Tx Frame Statistics */
+struct bna_stats_fc_tx
+{
+ u64 txf_ucast_octets;
+ u64 txf_ucast;
+ u64 txf_ucast_vlan;
+
+ u64 txf_mcast_octets;
+ u64 txf_mcast;
+ u64 txf_mcast_vlan;
+
+ u64 txf_bcast_octets;
+ u64 txf_bcast;
+ u64 txf_bcast_vlan;
+
+ u64 txf_parity_errors;
+ u64 txf_timeout;
+ u64 txf_fid_parity_errors;
+};
+
+
+/* FC Rx Frame Statistics */
+struct bna_stats_fc_rx
+{
+ u64 rxf_ucast_octets;
+ u64 rxf_ucast;
+ u64 rxf_ucast_vlan;
+
+ u64 rxf_mcast_octets;
+ u64 rxf_mcast;
+ u64 rxf_mcast_vlan;
+
+ u64 rxf_bcast_octets;
+ u64 rxf_bcast;
+ u64 rxf_bcast_vlan;
+};
+
+
+/* RAD Frame Statistics */
+struct cna_stats_rad
+{
+ u64 rx_frames;
+ u64 rx_octets;
+ u64 rx_vlan_frames;
+
+ u64 rx_ucast;
+ u64 rx_ucast_octets;
+ u64 rx_ucast_vlan;
+
+ u64 rx_mcast;
+ u64 rx_mcast_octets;
+ u64 rx_mcast_vlan;
+
+ u64 rx_bcast;
+ u64 rx_bcast_octets;
+ u64 rx_bcast_vlan;
+
+ u64 rx_drops;
+};
+
+
+/* BPC Tx Registers */
+struct cna_stats_bpc_tx
+{
+ u64 tx_pause[8];
+ u64 tx_zero_pause[8]; /* Pause cancellation */
+ u64 tx_first_pause[8];/* Pause initiation rather than retention*/
+};
+
+
+/* BPC Rx Registers */
+struct cna_stats_bpc_rx
+{
+ u64 rx_pause[8];
+ u64 rx_zero_pause[8]; /* Pause cancellation */
+ u64 rx_first_pause[8];/* Pause initiation rather than retention*/
+};
+
+
+/* MAC Rx Statistics */
+struct cna_stats_mac_rx
+{
+ u64 frame_64; /* both rx and tx counter */
+ u64 frame_65_127; /* both rx and tx counter */
+ u64 frame_128_255; /* both rx and tx counter */
+ u64 frame_256_511; /* both rx and tx counter */
+ u64 frame_512_1023; /* both rx and tx counter */
+ u64 frame_1024_1518; /* both rx and tx counter */
+ u64 frame_1518_1522; /* both rx and tx counter */
+ u64 rx_bytes;
+ u64 rx_packets;
+ u64 rx_fcs_error;
+ u64 rx_multicast;
+ u64 rx_broadcast;
+ u64 rx_control_frames;
+ u64 rx_pause;
+ u64 rx_unknown_opcode;
+ u64 rx_alignment_error;
+ u64 rx_frame_length_error;
+ u64 rx_code_error;
+ u64 rx_carrier_sense_error;
+ u64 rx_undersize;
+ u64 rx_oversize;
+ u64 rx_fragments;
+ u64 rx_jabber;
+ u64 rx_drop;
+};
+
+
+/* MAC Tx Statistics */
+struct cna_stats_mac_tx
+{
+ u64 tx_bytes;
+ u64 tx_packets;
+ u64 tx_multicast;
+ u64 tx_broadcast;
+ u64 tx_pause;
+ u64 tx_deferral;
+ u64 tx_excessive_deferral;
+ u64 tx_single_collision;
+ u64 tx_muliple_collision;
+ u64 tx_late_collision;
+ u64 tx_excessive_collision;
+ u64 tx_total_collision;
+ u64 tx_pause_honored;
+ u64 tx_drop;
+ u64 tx_jabber;
+ u64 tx_fcs_error;
+ u64 tx_control_frame;
+ u64 tx_oversize;
+ u64 tx_undersize;
+ u64 tx_fragments;
+};
+
+/* Complete statistics */
+struct bna_stats
+{
+ struct cna_stats_mac_rx mac_rx_stats;
+ struct cna_stats_bpc_rx bpc_rx_stats;
+ struct cna_stats_rad rad_stats;
+ struct bna_stats_fc_rx fc_rx_stats;
+ struct cna_stats_mac_tx mac_tx_stats;
+ struct cna_stats_bpc_tx bpc_tx_stats;
+ struct bna_stats_fc_tx fc_tx_stats;
+ struct bna_stats_rxf rxf_stats[BNA_TXF_ID_MAX];
+ struct bna_stats_txf txf_stats[BNA_RXF_ID_MAX];
+};
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/cs/bfa_checksum.h patch/drivers/scsi/bfa/include/cs/bfa_checksum.h
--- orig/drivers/scsi/bfa/include/cs/bfa_checksum.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cs/bfa_checksum.h 2009-03-14 11:44:58.053016000 -0700
@@ -0,0 +1,60 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_checksum.h BFA checksum utilities
+ */
+
+#ifndef __BFA_CHECKSUM_H__
+#define __BFA_CHECKSUM_H__
+
+static inline u32
+bfa_checksum_u32(u32 *buf, int sz)
+{
+ int i, m = sz >> 2;
+ u32 sum = 0;
+
+ for (i = 0; i < m; i++)
+ sum ^= buf[i];
+
+ return (sum);
+}
+
+static inline u16
+bfa_checksum_u16(u16 *buf, int sz)
+{
+ int i, m = sz >> 1;
+ u16 sum = 0;
+
+ for (i = 0; i < m; i++)
+ sum ^= buf[i];
+
+ return (sum);
+}
+
+static inline u8
+bfa_checksum_u8(u8 *buf, int sz)
+{
+ int i;
+ u8 sum = 0;
+
+ for (i = 0; i < sz; i++)
+ sum ^= buf[i];
+
+ return (sum);
+}
+#endif
diff -urpN orig/drivers/scsi/bfa/include/cs/bfa_debug.h patch/drivers/scsi/bfa/include/cs/bfa_debug.h
--- orig/drivers/scsi/bfa/include/cs/bfa_debug.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cs/bfa_debug.h 2009-03-14 11:44:58.039946000 -0700
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_debug.h BFA debug interfaces
+ */
+
+#ifndef __BFA_DEBUG_H__
+#define __BFA_DEBUG_H__
+
+#define bfa_assert(__cond) do { \
+ if (!(__cond)) \
+ bfa_panic(__LINE__, __FILE__, #__cond ); \
+} while (0)
+
+#ifndef BFA_PERF_BUILD
+#define bfa_assert_fp(__cond) bfa_assert(__cond)
+#else
+#define bfa_assert_fp(__cond)
+#endif
+
+void bfa_panic(int line, char *file, char *panicstr);
+
+#endif /* __BFA_DEBUG_H__ */
diff -urpN orig/drivers/scsi/bfa/include/cs/bfa_ht.h patch/drivers/scsi/bfa/include/cs/bfa_ht.h
--- orig/drivers/scsi/bfa/include/cs/bfa_ht.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cs/bfa_ht.h 2009-03-14 11:44:58.026562000 -0700
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_HT_H
+#define __BFA_HT_H
+
+#include "bfa_q.h"
+
+#define bfa_ht_t struct list_head *
+
+/**
+ * Declares and defines a function that inits a hash table
+ *
+ * @param[in] name prefix name for the hash init functions.
+ *
+ * @return
+ * NA
+ *
+ * Special Considerations:
+ *
+ * @note
+ * When the module specific hash_init function is called (for example,
+ * xyz_hash_init()), the ht pointer should be point to a block of memory which
+ * is (sizeof(bfa_q_t) * n_elem)
+ */
+#define BFA_HT_INIT(name) \
+ int name##_hash_init(bfa_ht_t ht, int n_elem ); \
+ \
+ int name##_hash_init(bfa_ht_t ht, int n_elem) \
+ { \
+ int i; \
+ \
+ if (n_elem <= 0) \
+ return (-1 ); \
+ \
+ if (ht == NULL) \
+ return (-1 ); \
+ \
+ for (i = 0; i < n_elem; i++) \
+ INIT_LIST_HEAD(&ht[i] ); \
+ \
+ return 0; \
+ } \
+
+/**
+ * Declares and defines a function that adds an entry to a hash table
+ *
+ * @param[in] name prefix name for the hash init functions.
+ * @param[in] e_type hash entry type
+ * @param[in] h_fn is a macro or function that hashes an element to
+ * an integer. This hash function should return a
+ * value that is less than n_elem value (that was used
+ * in hash_init() call).
+ *
+ * @return
+ * NA
+ *
+ * Special Considerations:
+ *
+ * @note
+ */
+#define BFA_HT_ADD(name, e_type, h_fn) \
+ void name##_hash_add(bfa_ht_t ht_hdl, e_type entry ); \
+ \
+ void \
+ name##_hash_add(bfa_ht_t ht_hdl, e_type entry) \
+ { \
+ int h_val; \
+ \
+ bfa_assert(ht_hdl != NULL && entry != NULL ); \
+ \
+ /* we want to enforce this */ \
+ /* bfa_assert(name##_hash_lookup(ht_hdl, entry) == NULL); */\
+ \
+ h_val = h_fn(entry ); \
+ bfa_assert(h_val >= 0 ); \
+ bfa_q_qe_init(entry ); \
+ list_add(entry, &ht_hdl[h_val]); \
+ \
+ } \
+
+/**
+ * Declares and defines a function that removes an entry from a hash table
+ *
+ * @param[in] name prefix name for the hash init functions.
+ * @param[in] e_type hash entry type
+ *
+ * @return
+ * NA
+ *
+ * Special Considerations:
+ *
+ * @note
+ */
+#define BFA_HT_REMOVE(name, e_type) \
+ void name##_hash_remove(bfa_ht_t ht_hdl, e_type entry ); \
+ \
+ void \
+ name##_hash_remove(bfa_ht_t ht_hdl, e_type entry) \
+ { \
+ bfa_assert(ht_hdl != NULL && entry != NULL ); \
+ \
+ /* we want to enforce this */ \
+ bfa_assert(name##_hash_lookup(ht_hdl, entry) != NULL ); \
+ list_del(entry ); \
+ } \
+
+/**
+ * Declares and defines a function that removes an entry from a hash table
+ *
+ * @param[in] name prefix name for the hash init functions.
+ * @param[in] e_type hash entry type
+ * @param[in] h_fn is a macro or function that hashes an element to
+ * an integer. This hash function should return a
+ * value that is less than n_elem value (that was used
+ * in hash_init() call).
+ * @param[in] c_fn is a macro or function that takes two e_type args
+ * and compares the key values embedded in that
+ * structure. Should return 1 if the keys match and
+ * 0 otherwise.
+ *
+ * @return
+ * NA
+ *
+ * Special Considerations:
+ *
+ * @note
+ */
+#define BFA_HT_LOOKUP(name, e_type, h_fn, c_fn) \
+ e_type \
+ name##_hash_lookup(bfa_ht_t ht_hdl, e_type he_with_key ); \
+ \
+ e_type \
+ name##_hash_lookup(bfa_ht_t ht_hdl, e_type he_with_key) \
+ { \
+ struct list_head *q, *qe; \
+ int h_val; \
+ \
+ /* Basic checking */ \
+ bfa_assert(ht_hdl != NULL && he_with_key != NULL ); \
+ \
+ /* Hash the data */ \
+ h_val = h_fn(he_with_key ); \
+ bfa_assert(h_val >= 0 ); \
+ \
+ q = &ht_hdl[h_val]; \
+ qe = bfa_q_next(q ); \
+ \
+ /* Search for exact match */ \
+ while (qe != q) { \
+ if (c_fn(((e_type)qe), he_with_key)) \
+ return (e_type)qe; \
+ else \
+ qe = bfa_q_next(qe ); \
+ } \
+ \
+ return NULL; \
+ }
+
+#endif /* __BFA_HT_H */
diff -urpN orig/drivers/scsi/bfa/include/cs/bfa_log.h patch/drivers/scsi/bfa/include/cs/bfa_log.h
--- orig/drivers/scsi/bfa/include/cs/bfa_log.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cs/bfa_log.h 2009-03-14 11:44:58.033331000 -0700
@@ -0,0 +1,183 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_log.h BFA log library data structure and function definition
+ */
+
+#ifndef __BFA_LOG_H__
+#define __BFA_LOG_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_aen.h>
+
+/*
+ * BFA log module definition
+ *
+ * To create a new module id:
+ * Add a #define at the end of the list below. Select a value for your
+ * definition so that it is one (1) greater than the previous
+ * definition. Modify the definition of BFA_LOG_MODULE_ID_MAX to become
+ * your new definition.
+ * Should have no gaps in between the values because this is used in arrays.
+ * IMPORTANT: AEN_IDs must be at the begining, otherwise update bfa_defs_aen.h
+ */
+
+enum bfa_log_module_id {
+ BFA_LOG_UNUSED_ID = 0,
+
+ /* AEN defs begin */
+ BFA_LOG_AEN_MIN = BFA_LOG_UNUSED_ID,
+
+ BFA_LOG_AEN_ID_ADAPTER = BFA_LOG_AEN_MIN + BFA_AEN_CAT_ADAPTER,/* 1 */
+ BFA_LOG_AEN_ID_PORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_PORT, /* 2 */
+ BFA_LOG_AEN_ID_LPORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_LPORT, /* 3 */
+ BFA_LOG_AEN_ID_RPORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_RPORT, /* 4 */
+ BFA_LOG_AEN_ID_ITNIM = BFA_LOG_AEN_MIN + BFA_AEN_CAT_ITNIM, /* 5 */
+ BFA_LOG_AEN_ID_ITNTM = BFA_LOG_AEN_MIN + BFA_AEN_CAT_ITNTM, /* 6 */
+ BFA_LOG_AEN_ID_IPFC = BFA_LOG_AEN_MIN + BFA_AEN_CAT_IPFC, /* 7 */
+ BFA_LOG_AEN_ID_AUDIT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_AUDIT, /* 8 */
+ BFA_LOG_AEN_ID_IOC = BFA_LOG_AEN_MIN + BFA_AEN_CAT_IOC, /* 9 */
+ BFA_LOG_AEN_ID_ETHPORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_ETHPORT,/* 10 */
+
+ BFA_LOG_AEN_MAX = BFA_LOG_AEN_ID_ETHPORT,
+ /* AEN defs end */
+
+ BFA_LOG_MODULE_ID_MIN = BFA_LOG_AEN_MAX,
+
+ BFA_LOG_FW_ID = BFA_LOG_MODULE_ID_MIN + 1,
+ BFA_LOG_HAL_ID = BFA_LOG_MODULE_ID_MIN + 2,
+ BFA_LOG_FCS_ID = BFA_LOG_MODULE_ID_MIN + 3,
+ BFA_LOG_WDRV_ID = BFA_LOG_MODULE_ID_MIN + 4,
+ BFA_LOG_LINUX_ID = BFA_LOG_MODULE_ID_MIN + 5,
+ BFA_LOG_SOLARIS_ID = BFA_LOG_MODULE_ID_MIN + 6,
+
+ BFA_LOG_MODULE_ID_MAX = BFA_LOG_SOLARIS_ID,
+
+ /* Not part of any arrays */
+ BFA_LOG_MODULE_ID_ALL = BFA_LOG_MODULE_ID_MAX + 1,
+ BFA_LOG_AEN_ALL = BFA_LOG_MODULE_ID_MAX + 2,
+ BFA_LOG_DRV_ALL = BFA_LOG_MODULE_ID_MAX + 3,
+};
+
+/*
+ * BFA log catalog name
+ */
+#define BFA_LOG_CAT_NAME "BFA"
+
+/*
+ * bfa log severity values
+ */
+enum bfa_log_severity {
+ BFA_LOG_INVALID = 0,
+ BFA_LOG_CRITICAL = 1,
+ BFA_LOG_ERROR = 2,
+ BFA_LOG_WARNING = 3,
+ BFA_LOG_INFO = 4,
+ BFA_LOG_LEVEL_MAX = BFA_LOG_INFO
+};
+
+#define BFA_LOG_MODID_OFFSET 16
+
+
+struct bfa_log_msgdef_s {
+ u32 msg_id; /* message id */
+ int attributes; /* attributes */
+ int severity; /* severity level */
+ char *msg_value;
+ /* msg string */
+ char *message;
+ /* msg format string */
+ int arg_type; /* argument type */
+ int arg_num; /* number of argument */
+};
+
+/*
+ * supported argument type
+ */
+enum bfa_log_arg_type {
+ BFA_LOG_S = 0, /* string */
+ BFA_LOG_D, /* decimal */
+ BFA_LOG_I, /* integer */
+ BFA_LOG_O, /* oct number */
+ BFA_LOG_U, /* unsigned integer */
+ BFA_LOG_X, /* hex number */
+ BFA_LOG_F, /* floating */
+ BFA_LOG_C, /* character */
+ BFA_LOG_L, /* double */
+ BFA_LOG_P /* pointer */
+};
+
+#define BFA_LOG_ARG_TYPE 2
+#define BFA_LOG_ARG0 (0 * BFA_LOG_ARG_TYPE)
+#define BFA_LOG_ARG1 (1 * BFA_LOG_ARG_TYPE)
+#define BFA_LOG_ARG2 (2 * BFA_LOG_ARG_TYPE)
+#define BFA_LOG_ARG3 (3 * BFA_LOG_ARG_TYPE)
+
+#define BFA_LOG_GET_MOD_ID(msgid) ((msgid >> BFA_LOG_MODID_OFFSET) & 0xff)
+#define BFA_LOG_GET_MSG_IDX(msgid) (msgid & 0xffff)
+#define BFA_LOG_GET_MSG_ID(msgdef) ((msgdef)->msg_id)
+#define BFA_LOG_GET_MSG_FMT_STRING(msgdef) ((msgdef)->message)
+#define BFA_LOG_GET_SEVERITY(msgdef) ((msgdef)->severity)
+
+/*
+ * Event attributes
+ */
+#define BFA_LOG_ATTR_NONE 0
+#define BFA_LOG_ATTR_AUDIT 1
+#define BFA_LOG_ATTR_LOG 2
+#define BFA_LOG_ATTR_FFDC 4
+
+#define BFA_LOG_CREATE_ID(msw, lsw) \
+ (((u32)msw << BFA_LOG_MODID_OFFSET) | lsw)
+
+struct bfa_log_mod_s;
+
+/**
+ * callback function
+ */
+typedef void (*bfa_log_cb_t)(struct bfa_log_mod_s *log_mod, u32 msg_id,
+ const char *format, ...);
+
+
+struct bfa_log_mod_s {
+ char instance_info[16]; /* instance info */
+ int log_level[BFA_LOG_MODULE_ID_MAX + 1];
+ /* log level for modules */
+ bfa_log_cb_t cbfn; /* callback function */
+};
+
+extern int bfa_log_init(struct bfa_log_mod_s *log_mod,
+ char *instance_name, bfa_log_cb_t cbfn);
+extern int bfa_log(struct bfa_log_mod_s *log_mod, u32 msg_id, ...);
+extern bfa_status_t bfa_log_set_level(struct bfa_log_mod_s *log_mod,
+ int mod_id, enum bfa_log_severity log_level);
+extern bfa_status_t bfa_log_set_level_all(struct bfa_log_mod_s *log_mod,
+ enum bfa_log_severity log_level);
+extern bfa_status_t bfa_log_set_level_aen(struct bfa_log_mod_s *log_mod,
+ enum bfa_log_severity log_level);
+extern enum bfa_log_severity bfa_log_get_level(struct bfa_log_mod_s *log_mod,
+ int mod_id);
+extern enum bfa_log_severity bfa_log_get_msg_level(
+ struct bfa_log_mod_s *log_mod, u32 msg_id);
+/*
+ * array of messages generated from xml files
+ */
+extern struct bfa_log_msgdef_s bfa_log_msg_array[];
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/cs/bfa_perf.h patch/drivers/scsi/bfa/include/cs/bfa_perf.h
--- orig/drivers/scsi/bfa/include/cs/bfa_perf.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cs/bfa_perf.h 2009-03-14 11:44:58.059443000 -0700
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFAD_PERF_H__
+#define __BFAD_PERF_H__
+
+#ifdef BFAD_PERF_BUILD
+
+#undef bfa_trc
+#undef bfa_trc32
+#undef bfa_assert
+#undef BFA_TRC_FILE
+
+#define bfa_trc(_trcp, _data)
+#define bfa_trc32(_trcp, _data)
+#define bfa_assert(__cond)
+#define BFA_TRC_FILE(__mod, __submod)
+
+#endif
+
+#endif /* __BFAD_PERF_H__ */
diff -urpN orig/drivers/scsi/bfa/include/cs/bfa_plog.h patch/drivers/scsi/bfa/include/cs/bfa_plog.h
--- orig/drivers/scsi/bfa/include/cs/bfa_plog.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cs/bfa_plog.h 2009-03-14 11:44:58.067700000 -0700
@@ -0,0 +1,161 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_PORTLOG_H__
+#define __BFA_PORTLOG_H__
+
+#include "protocol/fc.h"
+#include <defs/bfa_defs_types.h>
+
+#define BFA_PL_NLOG_ENTS 256
+#define BFA_PL_LOG_REC_INCR(_x) ((_x)++, (_x) %= BFA_PL_NLOG_ENTS)
+
+#define BFA_PL_STRING_LOG_SZ 32 /* number of chars in string log */
+#define BFA_PL_INT_LOG_SZ 8 /* number of integers in the integer log */
+
+enum bfa_plog_log_type {
+ BFA_PL_LOG_TYPE_INVALID = 0,
+ BFA_PL_LOG_TYPE_INT = 1,
+ BFA_PL_LOG_TYPE_STRING = 2,
+};
+
+/*
+ * the (fixed size) record format for each entry in the portlog
+ */
+struct bfa_plog_rec_s {
+ u32 tv; /* Filled by the portlog driver when the *
+ * entry is added to the circular log. */
+ u8 port; /* Source port that logged this entry. CM
+ * entities will use 0xFF */
+ u8 mid; /* Integer value to be used by all entities *
+ * while logging. The module id to string *
+ * conversion will be done by BFAL. See
+ * enum bfa_plog_mid */
+ u8 eid; /* indicates Rx, Tx, IOCTL, etc. See
+ * enum bfa_plog_eid */
+ u8 log_type; /* indicates string log or integer log.
+ * see bfa_plog_log_type_t */
+ u8 log_num_ints;
+ /*
+ * interpreted only if log_type is INT_LOG. indicates number of
+ * integers in the int_log[] (0-PL_INT_LOG_SZ).
+ */
+ u8 rsvd;
+ u16 misc; /* can be used to indicate fc frame length,
+ *etc.. */
+ union {
+ char string_log[BFA_PL_STRING_LOG_SZ];
+ u32 int_log[BFA_PL_INT_LOG_SZ];
+ } log_entry;
+
+};
+
+/*
+ * the following #defines will be used by the logging entities to indicate
+ * their module id. BFAL will convert the integer value to string format
+ *
+* process to be used while changing the following #defines:
+ * - Always add new entries at the end
+ * - define corresponding string in BFAL
+ * - Do not remove any entry or rearrange the order.
+ */
+enum bfa_plog_mid {
+ BFA_PL_MID_INVALID = 0,
+ BFA_PL_MID_DEBUG = 1,
+ BFA_PL_MID_DRVR = 2,
+ BFA_PL_MID_HAL = 3,
+ BFA_PL_MID_HAL_FCXP = 4,
+ BFA_PL_MID_HAL_UF = 5,
+ BFA_PL_MID_FCS = 6,
+ BFA_PL_MID_MAX = 7
+};
+
+#define BFA_PL_MID_STRLEN 8
+struct bfa_plog_mid_strings_s {
+ char m_str[BFA_PL_MID_STRLEN];
+};
+
+/*
+ * the following #defines will be used by the logging entities to indicate
+ * their event type. BFAL will convert the integer value to string format
+ *
+* process to be used while changing the following #defines:
+ * - Always add new entries at the end
+ * - define corresponding string in BFAL
+ * - Do not remove any entry or rearrange the order.
+ */
+enum bfa_plog_eid {
+ BFA_PL_EID_INVALID = 0,
+ BFA_PL_EID_IOC_DISABLE = 1,
+ BFA_PL_EID_IOC_ENABLE = 2,
+ BFA_PL_EID_PORT_DISABLE = 3,
+ BFA_PL_EID_PORT_ENABLE = 4,
+ BFA_PL_EID_PORT_ST_CHANGE = 5,
+ BFA_PL_EID_TX = 6,
+ BFA_PL_EID_TX_ACK1 = 7,
+ BFA_PL_EID_TX_RJT = 8,
+ BFA_PL_EID_TX_BSY = 9,
+ BFA_PL_EID_RX = 10,
+ BFA_PL_EID_RX_ACK1 = 11,
+ BFA_PL_EID_RX_RJT = 12,
+ BFA_PL_EID_RX_BSY = 13,
+ BFA_PL_EID_CT_IN = 14,
+ BFA_PL_EID_CT_OUT = 15,
+ BFA_PL_EID_DRIVER_START = 16,
+ BFA_PL_EID_RSCN = 17,
+ BFA_PL_EID_DEBUG = 18,
+ BFA_PL_EID_MISC = 19,
+ BFA_PL_EID_MAX = 20
+};
+
+#define BFA_PL_ENAME_STRLEN 8
+struct bfa_plog_eid_strings_s {
+ char e_str[BFA_PL_ENAME_STRLEN];
+};
+
+#define BFA_PL_SIG_LEN 8
+#define BFA_PL_SIG_STR "12pl123"
+
+/*
+ * per port circular log buffer
+ */
+struct bfa_plog_s {
+ char plog_sig[BFA_PL_SIG_LEN]; /* Start signature */
+ u8 plog_enabled;
+ u8 rsvd[7];
+ u32 ticks;
+ u16 head;
+ u16 tail;
+ struct bfa_plog_rec_s plog_recs[BFA_PL_NLOG_ENTS];
+};
+
+void bfa_plog_init(struct bfa_plog_s *plog);
+void bfa_plog_str(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+ enum bfa_plog_eid event, u16 misc, char *log_str);
+void bfa_plog_intarr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+ enum bfa_plog_eid event, u16 misc,
+ u32 *intarr, u32 num_ints);
+void bfa_plog_fchdr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+ enum bfa_plog_eid event, u16 misc, fchs_t *fchdr);
+void bfa_plog_fchdr_and_pl(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+ enum bfa_plog_eid event, u16 misc,
+ fchs_t *fchdr, u32 pld_w0);
+void bfa_plog_clear(struct bfa_plog_s *plog);
+void bfa_plog_enable(struct bfa_plog_s *plog);
+void bfa_plog_disable(struct bfa_plog_s *plog);
+bfa_boolean_t bfa_plog_get_setting(struct bfa_plog_s *plog);
+
+#endif /* __BFA_PORTLOG_H__ */
diff -urpN orig/drivers/scsi/bfa/include/cs/bfa_q.h patch/drivers/scsi/bfa/include/cs/bfa_q.h
--- orig/drivers/scsi/bfa/include/cs/bfa_q.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cs/bfa_q.h 2009-03-14 11:44:58.074353000 -0700
@@ -0,0 +1,96 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_q.h Circular queue definitions.
+ */
+
+#ifndef __BFA_Q_H__
+#define __BFA_Q_H__
+
+#define bfa_q_first(_q) ((void *)(((struct list_head *) (_q))->next))
+#define bfa_q_next(_qe) (((struct list_head *) (_qe))->next)
+#define bfa_q_prev(_qe) (((struct list_head *) (_qe))->prev)
+
+/*
+ * bfa_q_qe_init - to initialize a queue element
+ */
+#define bfa_q_qe_init(_qe) { \
+ bfa_q_next(_qe) = (struct list_head *) NULL; \
+ bfa_q_prev(_qe) = (struct list_head *) NULL; \
+}
+
+/*
+ * bfa_q_deq - dequeue an element from head of the queue
+ */
+#define bfa_q_deq(_q, _qe) { \
+ if (!list_empty(_q)) { \
+ (*((struct list_head **) (_qe))) = bfa_q_next(_q); \
+ bfa_q_prev(bfa_q_next(*((struct list_head **) _qe))) = \
+ (struct list_head *) (_q); \
+ bfa_q_next(_q) = bfa_q_next(*((struct list_head **) _qe)); \
+ BFA_Q_DBG_INIT(*((struct list_head **) _qe)); \
+ } else { \
+ *((struct list_head **) (_qe)) = (struct list_head *) NULL; \
+ } \
+}
+
+/*
+ * bfa_q_deq_tail - dequeue an element from tail of the queue
+ */
+#define bfa_q_deq_tail(_q, _qe) { \
+ if (!list_empty(_q)) { \
+ *((struct list_head **) (_qe)) = bfa_q_prev(_q); \
+ bfa_q_next(bfa_q_prev(*((struct list_head **) _qe))) = \
+ (struct list_head *) (_q); \
+ bfa_q_prev(_q) = bfa_q_prev(*(struct list_head **) _qe); \
+ BFA_Q_DBG_INIT(*((struct list_head **) _qe)); \
+ } else { \
+ *((struct list_head **) (_qe)) = (struct list_head *) NULL; \
+ } \
+}
+
+/*
+ * #ifdef BFA_DEBUG (Using bfa_assert to check for debug_build is not
+ * consistent across modules)
+ */
+#ifndef BFA_PERF_BUILD
+#define BFA_Q_DBG_INIT(_qe) bfa_q_qe_init(_qe)
+#else
+#define BFA_Q_DBG_INIT(_qe)
+#endif
+
+#define bfa_q_is_on_q(_q, _qe) bfa_q_is_on_q_func(_q, (struct list_head *)(_qe))
+extern int bfa_q_is_on_q_func(struct list_head *q, struct list_head *qe);
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/cs/bfa_sm.h patch/drivers/scsi/bfa/include/cs/bfa_sm.h
--- orig/drivers/scsi/bfa/include/cs/bfa_sm.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cs/bfa_sm.h 2009-03-14 11:44:58.012886000 -0700
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfasm.h State machine defines
+ */
+
+#ifndef __BFA_SM_H__
+#define __BFA_SM_H__
+
+typedef void (*bfa_sm_t)(void *sm, int event);
+
+#define bfa_sm_set_state(_sm, _state) (_sm)->sm = (bfa_sm_t)(_state)
+#define bfa_sm_send_event(_sm, _event) (_sm)->sm((_sm), (_event))
+#define bfa_sm_get_state(_sm) ((_sm)->sm)
+#define bfa_sm_cmp_state(_sm, _state) ((_sm)->sm == (bfa_sm_t)(_state))
+
+/**
+ * For converting from state machine function to state encoding.
+ */
+struct bfa_sm_table_s {
+ bfa_sm_t sm; /* state machine function */
+ int state; /* state machine encoding */
+ char *name; /* state name for display */
+};
+#define BFA_SM(_sm) ((bfa_sm_t)(_sm))
+
+int bfa_sm_to_state(struct bfa_sm_table_s *smt, bfa_sm_t sm);
+
+/**
+ * State machine with entry actions.
+ */
+typedef void (*bfa_fsm_t)(void *fsm, int event);
+
+/**
+ * oc - object class eg. bfa_ioc
+ * st - state, eg. reset
+ * otype - object type, eg. struct bfa_ioc_s
+ * etype - object type, eg. enum ioc_event
+ */
+#define bfa_fsm_state_decl(oc, st, otype, etype) \
+ static void oc ## _sm_ ## st(otype * fsm, etype event ); \
+ static void oc ## _sm_ ## st ## _entry(otype * fsm);
+
+#define bfa_fsm_set_state(_fsm, _state) do { \
+ (_fsm)->fsm = (bfa_fsm_t)(_state ); \
+ _state ## _entry(_fsm ); \
+} while (0)
+
+#define bfa_fsm_send_event(_fsm, _event) \
+ (_fsm)->fsm((_fsm), (_event))
+#define bfa_fsm_cmp_state(_fsm, _state) \
+ ((_fsm)->fsm == (bfa_fsm_t)(_state))
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/cs/bfa_trc.h patch/drivers/scsi/bfa/include/cs/bfa_trc.h
--- orig/drivers/scsi/bfa/include/cs/bfa_trc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cs/bfa_trc.h 2009-03-14 11:44:58.019514000 -0700
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_TRC_H__
+#define __BFA_TRC_H__
+
+#include <bfa_os_inc.h>
+
+#ifndef BFA_TRC_MAX
+#define BFA_TRC_MAX (4 * 1024)
+#endif
+
+#ifndef BFA_TRC_TS
+#define BFA_TRC_TS(_trcm) ((_trcm)->ticks ++)
+#endif
+
+struct bfa_trc_s {
+#ifdef __BIGENDIAN
+ u16 fileno;
+ u16 line;
+#else
+ u16 line;
+ u16 fileno;
+#endif
+ u32 timestamp;
+ union {
+ struct {
+ u32 rsvd;
+ u32 u32;
+ } u32;
+ u64 u64;
+ } data;
+};
+
+
+struct bfa_trc_mod_s {
+ u32 head;
+ u32 tail;
+ u32 ntrc;
+ u32 stopped;
+ u32 ticks;
+ u32 rsvd[3];
+ struct bfa_trc_s trc[BFA_TRC_MAX];
+};
+
+
+enum {
+ BFA_TRC_FW = 1, /* firmware modules */
+ BFA_TRC_HAL = 2, /* BFA modules */
+ BFA_TRC_FCS = 3, /* BFA FCS modules */
+ BFA_TRC_LDRV = 4, /* Linux driver modules */
+ BFA_TRC_SDRV = 5, /* Solaris driver modules */
+ BFA_TRC_VDRV = 6, /* vmware driver modules */
+ BFA_TRC_WDRV = 7, /* windows driver modules */
+ BFA_TRC_AEN = 8, /* AEN module */
+ BFA_TRC_BIOS = 9, /* bios driver modules */
+ BFA_TRC_EFI = 10, /* EFI driver modules */
+ BNA_TRC_WDRV = 11, /* BNA windows driver modules */
+ BNA_TRC_VDRV = 12, /* BNA vmware driver modules */
+ BNA_TRC_SDRV = 13, /* BNA Solaris driver modules */
+ BNA_TRC_LDRV = 14, /* BNA Linux driver modules */
+ BNA_TRC_HAL = 15, /* BNA modules */
+};
+#define BFA_TRC_MOD_SH 12
+#define BFA_TRC_MOD(__mod) ((BFA_TRC_ ## __mod) << BFA_TRC_MOD_SH)
+
+/**
+ * Define a new tracing file (module). Module should match one defined above.
+ */
+#define BFA_TRC_FILE(__mod, __submod) \
+ static int __trc_fileno = ((BFA_TRC_ ## __mod ## _ ## __submod) | \
+ BFA_TRC_MOD(__mod))
+
+
+#define bfa_trc32(_trcp, _data) \
+ __bfa_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u32)_data)
+
+
+#ifndef BFA_BOOT_BUILD
+#define bfa_trc(_trcp, _data) \
+ __bfa_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u64)_data)
+#else
+void bfa_boot_trc(struct bfa_trc_mod_s *trcmod, u16 fileno,
+ u16 line, u32 data);
+#define bfa_trc(_trcp, _data) \
+ bfa_boot_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u32)_data)
+#endif
+
+
+static inline void
+bfa_trc_init(struct bfa_trc_mod_s *trcm)
+{
+ trcm->head = trcm->tail = trcm->stopped = 0;
+ trcm->ntrc = BFA_TRC_MAX;
+}
+
+
+static inline void
+bfa_trc_stop(struct bfa_trc_mod_s *trcm)
+{
+ trcm->stopped = 1;
+}
+
+#ifdef CBFW
+extern void dc_flush(void *data);
+#else
+#define dc_flush(data)
+#endif
+
+
+static inline void
+__bfa_trc(struct bfa_trc_mod_s *trcm, int fileno, int line, u64 data)
+{
+ int tail = trcm->tail;
+ struct bfa_trc_s *trc = &trcm->trc[tail];
+
+ if (trcm->stopped)
+ return;
+
+ trc->fileno = (u16) fileno;
+ trc->line = (u16) line;
+ trc->data.u64 = data;
+ trc->timestamp = BFA_TRC_TS(trcm);
+ dc_flush(trc);
+
+ trcm->tail = (trcm->tail + 1) & (BFA_TRC_MAX - 1);
+ if (trcm->tail == trcm->head)
+ trcm->head = (trcm->head + 1) & (BFA_TRC_MAX - 1);
+ dc_flush(trcm);
+}
+
+
+static inline void
+__bfa_trc32(struct bfa_trc_mod_s *trcm, int fileno, int line, u32 data)
+{
+ int tail = trcm->tail;
+ struct bfa_trc_s *trc = &trcm->trc[tail];
+
+ if (trcm->stopped)
+ return;
+
+ trc->fileno = (u16) fileno;
+ trc->line = (u16) line;
+ trc->data.u32.u32 = data;
+ trc->timestamp = BFA_TRC_TS(trcm);
+ dc_flush(trc);
+
+ trcm->tail = (trcm->tail + 1) & (BFA_TRC_MAX - 1);
+ if (trcm->tail == trcm->head)
+ trcm->head = (trcm->head + 1) & (BFA_TRC_MAX - 1);
+ dc_flush(trcm);
+}
+
+#ifndef BFA_PERF_BUILD
+#define bfa_trc_fp(_trcp, _data) bfa_trc(_trcp, _data)
+#else
+#define bfa_trc_fp(_trcp, _data)
+#endif
+
+#endif /* __BFA_TRC_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/cs/bfa_wc.h patch/drivers/scsi/bfa/include/cs/bfa_wc.h
--- orig/drivers/scsi/bfa/include/cs/bfa_wc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cs/bfa_wc.h 2009-03-14 11:44:58.046536000 -0700
@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_wc.h Generic wait counter.
+ */
+
+#ifndef __BFA_WC_H__
+#define __BFA_WC_H__
+
+typedef void (*bfa_wc_resume_t) (void *cbarg);
+
+struct bfa_wc_s {
+ bfa_wc_resume_t wc_resume;
+ void *wc_cbarg;
+ int wc_count;
+};
+
+static inline void
+bfa_wc_up(struct bfa_wc_s *wc)
+{
+ wc->wc_count++;
+}
+
+static inline void
+bfa_wc_down(struct bfa_wc_s *wc)
+{
+ wc->wc_count--;
+ if (wc->wc_count == 0)
+ wc->wc_resume(wc->wc_cbarg);
+}
+
+/**
+ * Initialize a waiting counter.
+ */
+static inline void
+bfa_wc_init(struct bfa_wc_s *wc, bfa_wc_resume_t wc_resume, void *wc_cbarg)
+{
+ wc->wc_resume = wc_resume;
+ wc->wc_cbarg = wc_cbarg;
+ wc->wc_count = 0;
+ bfa_wc_up(wc);
+}
+
+/**
+ * Wait for counter to reach zero
+ */
+static inline void
+bfa_wc_wait(struct bfa_wc_s *wc)
+{
+ bfa_wc_down(wc);
+}
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_adapter.h patch/drivers/scsi/bfa/include/defs/bfa_defs_adapter.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_adapter.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_adapter.h 2009-03-14 11:44:58.248933000 -0700
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_ADAPTER_H__
+#define __BFA_DEFS_ADAPTER_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_version.h>
+#include <defs/bfa_defs_mfg.h>
+
+/**
+ * BFA adapter level attributes.
+ */
+enum {
+ BFA_ADAPTER_SERIAL_NUM_LEN = STRSZ(BFA_MFG_SERIALNUM_SIZE),
+ /*
+ *!< adapter serial num length
+ */
+ BFA_ADAPTER_MODEL_NAME_LEN = 16, /* model name length */
+ BFA_ADAPTER_MODEL_DESCR_LEN = 128, /* model description length */
+ BFA_ADAPTER_MFG_NAME_LEN = 8, /* manufacturer name length */
+ BFA_ADAPTER_SYM_NAME_LEN = 64, /* adapter symbolic name length */
+ BFA_ADAPTER_OS_TYPE_LEN = 64, /* adapter os type length */
+};
+
+struct bfa_adapter_attr_s {
+ char manufacturer[BFA_ADAPTER_MFG_NAME_LEN];
+ char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
+ u32 rsvd1;
+ char model[BFA_ADAPTER_MODEL_NAME_LEN];
+ char model_descr[BFA_ADAPTER_MODEL_DESCR_LEN];
+ wwn_t pwwn;
+ char node_symname[FC_SYMNAME_MAX];
+ char hw_ver[BFA_VERSION_LEN];
+ char fw_ver[BFA_VERSION_LEN];
+ char optrom_ver[BFA_VERSION_LEN];
+ char os_type[BFA_ADAPTER_OS_TYPE_LEN];
+ struct bfa_mfg_vpd_s vpd;
+ struct mac_s mac;
+
+ u8 nports;
+ u8 max_speed;
+ u8 prototype;
+ char asic_rev;
+
+ u8 pcie_gen;
+ u8 pcie_lanes_orig;
+ u8 pcie_lanes;
+ u8 cna_capable;
+};
+
+/**
+ * BFA adapter level events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_PORT_AEN_ADD: [in]: None [out]: serial_num, pwwn, nports
+ * BFA_PORT_AEN_REMOVE: [in]: pwwn [out]: serial_num, pwwn, nports
+ */
+enum bfa_adapter_aen_event {
+ BFA_ADAPTER_AEN_ADD = 1, /* New Adapter found event */
+ BFA_ADAPTER_AEN_REMOVE = 2, /* Adapter removed event */
+};
+
+struct bfa_adapter_aen_data_s {
+ char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
+ u32 nports; /* Number of NPorts */
+ wwn_t pwwn; /* WWN of one of its physical port */
+};
+
+#endif /* __BFA_DEFS_ADAPTER_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_aen.h patch/drivers/scsi/bfa/include/defs/bfa_defs_aen.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_aen.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_aen.h 2009-03-14 11:44:58.378724000 -0700
@@ -0,0 +1,72 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_AEN_H__
+#define __BFA_DEFS_AEN_H__
+
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_ioc.h>
+#include <defs/bfa_defs_adapter.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_lport.h>
+#include <defs/bfa_defs_rport.h>
+#include <defs/bfa_defs_itnim.h>
+#include <defs/bfa_defs_itntm.h>
+#include <defs/bfa_defs_ipfc.h>
+#include <defs/bfa_defs_audit.h>
+#include <defs/bfa_defs_ethport.h>
+
+enum bfa_aen_category {
+ BFA_AEN_CAT_ADAPTER = 1,
+ BFA_AEN_CAT_PORT = 2,
+ BFA_AEN_CAT_LPORT = 3,
+ BFA_AEN_CAT_RPORT = 4,
+ BFA_AEN_CAT_ITNIM = 5,
+ BFA_AEN_CAT_ITNTM = 6,
+ BFA_AEN_CAT_IPFC = 7,
+ BFA_AEN_CAT_AUDIT = 8,
+ BFA_AEN_CAT_IOC = 9,
+ BFA_AEN_CAT_ETHPORT = 10,
+ BFA_AEN_MAX_CAT = 10
+};
+
+#pragma pack(1)
+union bfa_aen_data_u {
+ struct bfa_adapter_aen_data_s adapter;
+ struct bfa_port_aen_data_s port;
+ struct bfa_lport_aen_data_s lport;
+ struct bfa_rport_aen_data_s rport;
+ struct bfa_itnim_aen_data_s itnim;
+ struct bfa_audit_aen_data_s audit;
+ struct bfa_ioc_aen_data_s ioc;
+ struct bfa_ethport_aen_data_s ethport;
+};
+
+struct bfa_aen_entry_s {
+ enum bfa_aen_category aen_category;
+ int aen_type;
+ union bfa_aen_data_u aen_data;
+ struct bfa_timeval_s aen_tv;
+ s32 bfad_num;
+ s32 rsvd[1];
+};
+
+#pragma pack()
+
+#define bfa_aen_event_t int
+
+#endif /* __BFA_DEFS_AEN_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_audit.h patch/drivers/scsi/bfa/include/defs/bfa_defs_audit.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_audit.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_audit.h 2009-03-14 11:44:58.255942000 -0700
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_AUDIT_H__
+#define __BFA_DEFS_AUDIT_H__
+
+#include <bfa_os_inc.h>
+
+/**
+ * BFA audit events
+ */
+enum bfa_audit_aen_event {
+ BFA_AUDIT_AEN_AUTH_ENABLE = 1,
+ BFA_AUDIT_AEN_AUTH_DISABLE = 2,
+};
+
+/**
+ * audit event data
+ */
+struct bfa_audit_aen_data_s {
+ wwn_t pwwn;
+};
+
+#endif /* __BFA_DEFS_AUDIT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_auth.h patch/drivers/scsi/bfa/include/defs/bfa_defs_auth.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_auth.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_auth.h 2009-03-14 11:44:58.263736000 -0700
@@ -0,0 +1,112 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_AUTH_H__
+#define __BFA_DEFS_AUTH_H__
+
+#include <defs/bfa_defs_types.h>
+
+#define PUBLIC_KEY 15409
+#define PRIVATE_KEY 19009
+#define KEY_LEN 32399
+#define BFA_AUTH_SECRET_STRING_LEN 256
+#define BFA_AUTH_FAIL_TIMEOUT 0xFF
+
+/**
+ * Authentication status
+ */
+enum bfa_auth_status {
+ BFA_AUTH_STATUS_NONE = 0, /* no authentication */
+ BFA_AUTH_UNINIT = 1, /* state - uninit */
+ BFA_AUTH_NEG_SEND = 2, /* state - negotiate send */
+ BFA_AUTH_CHAL_WAIT = 3, /* state - challenge wait */
+ BFA_AUTH_NEG_RETRY = 4, /* state - negotiate retry */
+ BFA_AUTH_REPLY_SEND = 5, /* state - reply send */
+ BFA_AUTH_STATUS_WAIT = 6, /* state - status wait */
+ BFA_AUTH_SUCCESS = 7, /* state - success */
+ BFA_AUTH_FAILED = 8, /* state - failed */
+ BFA_AUTH_STATUS_UNKNOWN = 9, /* authentication status unknown */
+};
+
+struct auth_proto_stats_s {
+ u32 auth_rjts;
+ u32 auth_negs;
+ u32 auth_dones;
+
+ u32 dhchap_challenges;
+ u32 dhchap_replies;
+ u32 dhchap_successes;
+};
+
+/**
+ * Authentication related statistics
+ */
+struct bfa_auth_stats_s {
+ u32 auth_failures; /* authentication failures */
+ u32 auth_successes; /* authentication successes*/
+ struct auth_proto_stats_s auth_rx_stats; /* Rx protocol stats */
+ struct auth_proto_stats_s auth_tx_stats; /* Tx protocol stats */
+};
+
+/**
+ * Authentication hash function algorithms
+ */
+enum bfa_auth_algo {
+ BFA_AUTH_ALGO_MD5 = 1, /* Message-Digest algorithm 5 */
+ BFA_AUTH_ALGO_SHA1 = 2, /* Secure Hash Algorithm 1 */
+ BFA_AUTH_ALGO_MS = 3, /* MD5, then SHA-1 */
+ BFA_AUTH_ALGO_SM = 4, /* SHA-1, then MD5 */
+};
+
+/**
+ * DH Groups
+ *
+ * Current value could be combination of one or more of the following values
+ */
+enum bfa_auth_group {
+ BFA_AUTH_GROUP_DHNULL = 0, /* DH NULL (value == 0) */
+ BFA_AUTH_GROUP_DH768 = 1, /* DH group 768 (value == 1) */
+ BFA_AUTH_GROUP_DH1024 = 2, /* DH group 1024 (value == 2) */
+ BFA_AUTH_GROUP_DH1280 = 4, /* DH group 1280 (value == 3) */
+ BFA_AUTH_GROUP_DH1536 = 8, /* DH group 1536 (value == 4) */
+
+ BFA_AUTH_GROUP_ALL = 256 /* Use default DH group order
+ * 0, 1, 2, 3, 4 */
+};
+
+/**
+ * Authentication secret sources
+ */
+enum bfa_auth_secretsource {
+ BFA_AUTH_SECSRC_LOCAL = 1, /* locally configured */
+ BFA_AUTH_SECSRC_RADIUS = 2, /* use radius server */
+ BFA_AUTH_SECSRC_TACACS = 3, /* TACACS server */
+};
+
+/**
+ * Authentication attributes
+ */
+struct bfa_auth_attr_s {
+ enum bfa_auth_status status;
+ enum bfa_auth_algo algo;
+ enum bfa_auth_group dh_grp;
+ u16 rjt_code;
+ u16 rjt_code_exp;
+ u8 secret_set;
+ u8 resv[7];
+};
+
+#endif /* __BFA_DEFS_AUTH_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_boot.h patch/drivers/scsi/bfa/include/defs/bfa_defs_boot.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_boot.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_boot.h 2009-03-14 11:44:58.220194000 -0700
@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_BOOT_H__
+#define __BFA_DEFS_BOOT_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_pport.h>
+
+enum {
+ BFA_BOOT_BOOTLUN_MAX = 4, /* maximum boot lun per IOC */
+};
+
+#define BOOT_CFG_REV1 1
+
+/**
+ * Boot options setting. Boot options setting determines from where
+ * to get the boot lun information
+ */
+ BFA_BOOT_AUTO_DISCOVER = 0, /* Boot from blun provided by fabric */
+ BFA_BOOT_STORED_BLUN = 1, /* Boot from bluns stored in flash */
+ BFA_BOOT_FIRST_LUN = 2, /* Boot from first discovered blun */
+} bfa_boot_bootopt_t;
+
+/**
+ * Boot lun information.
+ */
+struct bfa_boot_bootlun_s {
+ wwn_t pwwn; /* port wwn of target */
+ lun_t lun; /* 64-bit lun */
+};
+
+/**
+ * BOOT boot configuraton
+ */
+struct bfa_boot_cfg_s {
+ u8 version;
+ u8 rsvd1;
+ u16 chksum;
+
+ u8 enable; /* enable/disable SAN boot */
+ u8 speed; /* boot speed settings */
+ u8 topology; /* boot topology setting */
+ u8 bootopt; /* bfa_boot_bootopt_t */
+
+ u32 nbluns; /* number of boot luns */
+
+ u32 rsvd2;
+
+ struct bfa_boot_bootlun_s blun[BFA_BOOT_BOOTLUN_MAX];
+};
+
+#endif /* __BFA_DEFS_BOOT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_cee.h patch/drivers/scsi/bfa/include/defs/bfa_defs_cee.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_cee.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_cee.h 2009-03-14 11:44:58.335548000 -0700
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * bfa_defs_cee.h Interface declarations between host based
+ * BFAL and DCBX/LLDP module in Firmware
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_CEE_H__
+#define __BFA_DEFS_CEE_H__
+
+#include <defs/bfa_defs_types.h>
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+#define BFA_CEE_LLDP_MAX_STRING_LEN (128)
+
+
+/* FIXME: this is coming from the protocol spec. Can the host & apps share the
+ protocol .h files ?
+ */
+#define BFA_CEE_LLDP_SYS_CAP_OTHER 0x0001
+#define BFA_CEE_LLDP_SYS_CAP_REPEATER 0x0002
+#define BFA_CEE_LLDP_SYS_CAP_MAC_BRIDGE 0x0004
+#define BFA_CEE_LLDP_SYS_CAP_WLAN_AP 0x0008
+#define BFA_CEE_LLDP_SYS_CAP_ROUTER 0x0010
+#define BFA_CEE_LLDP_SYS_CAP_TELEPHONE 0x0020
+#define BFA_CEE_LLDP_SYS_CAP_DOCSIS_CD 0x0040
+#define BFA_CEE_LLDP_SYS_CAP_STATION 0x0080
+#define BFA_CEE_LLDP_SYS_CAP_CVLAN 0x0100
+#define BFA_CEE_LLDP_SYS_CAP_SVLAN 0x0200
+#define BFA_CEE_LLDP_SYS_CAP_TPMR 0x0400
+
+
+/* LLDP string type */
+struct bfa_cee_lldp_str_s {
+ u8 sub_type;
+ u8 len;
+ u8 rsvd[2];
+ u8 value[BFA_CEE_LLDP_MAX_STRING_LEN];
+};
+
+
+/* LLDP paramters */
+struct bfa_cee_lldp_cfg_s {
+ struct bfa_cee_lldp_str_s chassis_id;
+ struct bfa_cee_lldp_str_s port_id;
+ struct bfa_cee_lldp_str_s port_desc;
+ struct bfa_cee_lldp_str_s sys_name;
+ struct bfa_cee_lldp_str_s sys_desc;
+ struct bfa_cee_lldp_str_s mgmt_addr;
+ u16 time_to_interval;
+ u16 enabled_system_cap;
+};
+
+/* CEE/DCBX parameters */
+struct bfa_cee_dcbx_cfg_s {
+ u8 pgid[8];
+ u8 pg_percentage[8];
+ u8 pfc_enabled; /* bitmap of priorties with PFC enabled */
+ u8 fcoe_user_priority; /* bitmap of priorities used for FcoE traffic */
+ u8 rsvd[2];
+};
+
+/* CEE status */
+enum bfa_cee_status_e {
+ CEE_DOWN = 0,
+ CEE_UP = 1,
+};
+
+/* CEE Query */
+struct bfa_cee_attr_s {
+ u8 cee_status;
+ u8 error_reason;
+ struct bfa_cee_lldp_cfg_s lldp_remote;
+ struct bfa_cee_dcbx_cfg_s dcbx_remote;
+ mac_t src_mac;
+};
+
+
+
+
+
+/* LLDP/DCBX/CEE Statistics */
+
+struct bfa_cee_lldp_stats_s {
+ u32 frames_transmitted;
+ u32 frames_aged_out;
+ u32 frames_discarded;
+ u32 frames_in_error;
+ u32 frames_rcvd;
+ u32 tlvs_discarded;
+ u32 tlvs_unrecognized;
+};
+
+struct bfa_cee_dcbx_stats_s {
+ u32 dcbx_subtlvs_unrecognized;
+ u32 dcbx_negotiation_failed;
+ u32 dcbx_remote_cfg_changed;
+ u32 dcbx_remote_changed;
+ u32 dcbx_tlvs_invalid;
+ u32 dcbx_tlvs_received;
+ u32 cee_status_toggled;
+ u32 cee_hw_cfg_changed;
+ u32 cee_status_down;
+ u32 cee_status_up;
+};
+
+
+struct bfa_cee_stats_s {
+ struct bfa_cee_lldp_stats_s lldp_stats;
+ struct bfa_cee_dcbx_stats_s dcbx_stats;
+};
+
+#pragma pack()
+
+
+#endif /* __BFA_DEFS_CEE_H__ */
+
+
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_diag.h patch/drivers/scsi/bfa/include/defs/bfa_defs_diag.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_diag.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_diag.h 2009-03-14 11:44:58.239021000 -0700
@@ -0,0 +1,139 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_DIAG_H__
+#define __BFA_DEFS_DIAG_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_pport.h>
+#include <defs/bfa_defs_led.h>
+#include <bfi/bfi.h>
+#include <protocol/sfp.h>
+
+/**
+ * Memory test algorithms.
+ */
+enum bfa_diag_memtest_algo {
+ BFA_DIAG_MEMTEST_UNKNOWN = 0x00,
+ BFA_DIAG_MEMTEST_WALK01 = 0x01,
+ BFA_DIAG_MEMTEST_MARCHY = 0x02,
+ BFA_DIAG_MEMTEST_MATSPLUS = 0x04,
+ BFA_DIAG_MEMTEST_MOVI = 0x08,
+ BFA_DIAG_MEMTEST_TLAPNPSF1T = 0x10,
+};
+
+/**
+ * Firmware ping test results
+ */
+struct bfa_diag_fwping_result_s {
+ u32 data[BFI_IOC_MAX_CQS]; /* store the corrupted data */
+ u32 status[BFI_IOC_MAX_CQS];
+ u32 dmastatus;
+ u8 rsvd[4];
+};
+
+/**
+ * RAM test params
+ */
+struct bfa_diag_memtest_s {
+ u8 algo;
+ u8 rsvd[7];
+};
+
+/*
+ * User are expected to allocate one result data struct for each alog
+ */
+struct bfa_diag_memtest_result_s {
+ u32 status;
+ u32 addr;
+ u32 exp; /* expect value read from reg */
+ u32 act; /* actually value read */
+ u32 err_status; /* error status reg */
+ u32 err_status1; /* extra error info reg */
+ u32 err_addr; /* error address reg */
+ u8 algo;
+ u8 rsv[3];
+};
+
+/**
+ * Post diiagnostics test results
+ */
+struct bfa_diag_post_result_s {
+ u8 imist_pass; /* internal SRAM BIST test result */
+ u8 emist_pass; /* external SRAM BIST test result */
+ u8 serdes_pass; /* serdes test result */
+ u8 rsv;
+ u32 rsvd;
+};
+
+#define LB_LOOPCNT_DEFAULT (128 * 1024)
+#define LB_PATTERN_DEFAULT 0xB5B5B5B5
+#define QTEST_CNT_DEFAULT 10
+#define QTEST_PAT_DEFAULT LB_PATTERN_DEFAULT
+
+/**
+ * Loopback Test
+ */
+struct bfa_diag_loopback_s {
+ u32 loopcnt;
+ u32 pattern;
+ u8 lb_mode; /* bfa_pport_opmode_t */
+ u8 speed; /* bfa_pport_speed_t */
+ u8 rsvd[2];
+};
+
+struct bfa_diag_loopback_result_s {
+ u32 numtxmfrm; /* no. of transmit frame */
+ u32 numosffrm; /* no. of outstanding frame */
+ u32 numrcvfrm; /* no. of received good frame */
+ u32 badfrminf; /* mis-match info */
+ u32 badfrmnum; /* mis-match fram number */
+ u8 status; /* loopback test result */
+ u8 rsvd[3];
+};
+
+/**
+ * LED Test command
+ */
+struct bfa_diag_ledtest_s {
+ u32 cmd; /* bfa_led_op_t */
+ u32 color; /* bfa_led_color_t */
+ u16 freq; /* no. of blinks every 10 secs */
+ u8 led; /* bitmap of LEDs to be tested */
+ u8 rsvd[5];
+};
+
+/**
+ * SFP event
+ */
+#define BFA_DIAG_SFP_EVENT_POM 2
+#define BFA_DIAG_SFP_EVENT_INSERTED 1
+#define BFA_DIAG_SFP_EVENT_REMOVED 0
+
+/**
+ * Queue test results
+ */
+struct bfa_diag_qtest_result_s {
+ u32 status;
+ u16 count; /* sucessful queue test count */
+ u8 queue;
+ u8 rsvd; /* 64-bit align */
+};
+
+
+#endif /* __BFA_DEFS_DIAG_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_driver.h patch/drivers/scsi/bfa/include/defs/bfa_defs_driver.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_driver.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_driver.h 2009-03-14 11:44:58.315317000 -0700
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_DRIVER_H__
+#define __BFA_DEFS_DRIVER_H__
+
+/**
+ * Driver statistics
+ */
+ u16 tm_io_abort;
+ u16 tm_io_abort_comp;
+ u16 tm_lun_reset;
+ u16 tm_lun_reset_comp;
+ u16 tm_target_reset;
+ u16 tm_bus_reset;
+ u16 ioc_restart; /* IOC restart count */
+ u16 io_pending; /* outstanding io count per-IOC */
+ u64 control_req;
+ u64 input_req;
+ u64 output_req;
+ u64 input_words;
+ u64 output_words;
+} bfa_driver_stats_t;
+
+
+#endif /* __BFA_DEFS_DRIVER_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h patch/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h 2009-03-14 11:44:58.321998000 -0700
@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_ETHPORT_H__
+#define __BFA_DEFS_ETHPORT_H__
+
+#include <defs/bfa_defs_status.h>
+#include <cna/pstats/phyport_defs.h>
+#include <cna/pstats/ethport_defs.h>
+
+struct bna_tx_info_s {
+ u32 miniport_state;
+ u32 adapter_state;
+ u64 tx_count;
+ u64 tx_wi;
+ u64 tx_sg;
+ u64 tx_tcp_chksum;
+ u64 tx_udp_chksum;
+ u64 tx_ip_chksum;
+ u64 tx_lsov1;
+ u64 tx_lsov2;
+ u64 tx_max_sg_len ;
+};
+
+
+struct bna_rx_queue_info_s {
+ u16 q_id ;
+ u16 buf_size ;
+ u16 buf_count ;
+ u16 rsvd ;
+ u64 rx_count ;
+ u64 rx_dropped ;
+ u64 rx_unsupported ;
+ u64 rx_internal_err ;
+ u64 rss_count ;
+ u64 vlan_count ;
+ u64 rx_tcp_chksum ;
+ u64 rx_udp_chksum ;
+ u64 rx_ip_chksum ;
+ u64 rx_hds ;
+};
+
+
+struct bna_rx_q_set_s {
+ u16 q_set_type;
+ u32 miniport_state;
+ u32 adapter_state;
+ struct bna_rx_queue_info_s rx_queue[2];
+};
+
+
+struct bna_port_stats_s {
+ struct bna_tx_info_s tx_stats;
+ u16 qset_count ;
+ struct bna_rx_q_set_s rx_qset[8];
+};
+
+
+struct bfa_ethport_stats_s {
+ struct bna_stats_txf txf_stats[1];
+ struct bna_stats_rxf rxf_stats[1];
+ struct bnad_drv_stats drv_stats;
+};
+
+/**
+ * Ethernet port events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_PORT_AEN_ETH_LINKUP: [in]: mac [out]: mac
+ * BFA_PORT_AEN_ETH_LINKDOWN: [in]: mac [out]: mac
+ * BFA_PORT_AEN_ETH_ENABLE: [in]: mac [out]: mac
+ * BFA_PORT_AEN_ETH_DISABLE: [in]: mac [out]: mac
+ *
+ */
+enum bfa_ethport_aen_event {
+ BFA_ETHPORT_AEN_LINKUP = 1, /* Base Port Ethernet link up event */
+ BFA_ETHPORT_AEN_LINKDOWN = 2, /* Base Port Ethernet link down event */
+ BFA_ETHPORT_AEN_ENABLE = 3, /* Base Port Ethernet link enable event */
+ BFA_ETHPORT_AEN_DISABLE = 4, /* Base Port Ethernet link disable event */
+};
+
+struct bfa_ethport_aen_data_s {
+ mac_t mac; /* MAC address of the physical port */
+};
+
+
+#endif /* __BFA_DEFS_ETHPORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_im_common.h patch/drivers/scsi/bfa/include/defs/bfa_defs_im_common.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_im_common.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_im_common.h 2009-03-14 11:44:58.343039000 -0700
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Brocade Converged Network Adapter API
+ * Copyright (c) 2008 Brocade Communications Systems, Inc.
+ * All rights reserved.
+ */
+
+#ifndef __BFA_DEFS_IM_COMMON_H__
+#define __BFA_DEFS_IM_COMMON_H__
+
+#define BFA_ADAPTER_NAME_LEN 256
+#define BFA_ADAPTER_GUID_LEN 256
+//#define IM_DRIVER_SYM_LINK_NAME L"\\\\.\\bnadimd"
+
+ u64 tx_pkt_cnt;
+ u64 rx_pkt_cnt;
+ u32 duration;
+ u8 status;
+} bfa_im_stats_t, *pbfa_im_stats_t;
+
+#endif /* __BFA_DEFS_IM_COMMON_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_im_team.h patch/drivers/scsi/bfa/include/defs/bfa_defs_im_team.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_im_team.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_im_team.h 2009-03-14 11:44:58.349614000 -0700
@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * Brocade Converged Network Adapter API
+ * Copyright (c) 2008 Brocade Communications Systems, Inc.
+ * All rights reserved.
+ */
+
+#ifndef __BFA_DEFS_IM_TEAM_H__
+#define __BFA_DEFS_IM_TEAM_H__
+
+#include <protocol/types.h>
+
+#define BFA_TEAM_MAX_PORTS 8
+#define BFA_TEAM_NAME_LEN 256
+#define BFA_MAX_NUM_TEAMS 16
+#define BFA_TEAM_INVALID_DELAY -1
+
+ BFA_LACP_RATE_SLOW = 1,
+ BFA_LACP_RATE_FAST
+} bfa_im_lacp_rate_t;
+
+ BFA_TEAM_MODE_FAIL_OVER = 1,
+ BFA_TEAM_MODE_FAIL_BACK,
+ BFA_TEAM_MODE_LACP,
+ BFA_TEAM_MODE_NONE
+} bfa_im_team_mode_t;
+
+ BFA_XMIT_POLICY_L2 = 1,
+ BFA_XMIT_POLICY_L3_L4
+} bfa_im_xmit_policy_t;
+
+ bfa_im_team_mode_t team_mode;
+ bfa_im_lacp_rate_t lacp_rate;
+ bfa_im_xmit_policy_t xmit_policy;
+ int delay;
+ wchar_t primary[BFA_ADAPTER_NAME_LEN];
+ wchar_t preferred_primary[BFA_ADAPTER_NAME_LEN];
+ mac_t mac;
+ u16 num_ports;
+ u16 num_vlans;
+ u16 vlan_list[BFA_MAX_VLANS_PER_PORT];
+ wchar_t team_guid_list[BFA_TEAM_MAX_PORTS][BFA_ADAPTER_GUID_LEN];
+ wchar_t ioc_name_list[BFA_TEAM_MAX_PORTS][BFA_ADAPTER_NAME_LEN];
+} bfa_im_team_attr_t;
+
+ wchar_t team_name[BFA_TEAM_NAME_LEN];
+ bfa_im_xmit_policy_t xmit_policy;
+ int delay;
+ wchar_t primary[BFA_ADAPTER_NAME_LEN];
+ wchar_t preferred_primary[BFA_ADAPTER_NAME_LEN];
+}bfa_im_team_edit_t, *pbfa_im_team_edit_t;
+
+ wchar_t team_name[BFA_TEAM_NAME_LEN];
+ bfa_im_team_mode_t team_mode;
+ mac_t mac;
+}bfa_im_team_info_t;
+
+ bfa_im_team_info_t team_info[BFA_MAX_NUM_TEAMS];
+ u16 num_teams;
+} bfa_im_team_list_t, *pbfa_im_team_list_t;
+
+#endif /* __BFA_DEFS_IM_TEAM_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h patch/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h 2009-03-14 11:44:58.308613000 -0700
@@ -0,0 +1,314 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_IOCFC_H__
+#define __BFA_DEFS_IOCFC_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_version.h>
+#include <defs/bfa_defs_adapter.h>
+#include <defs/bfa_defs_pm.h>
+
+#define BFA_IOCFC_INTR_DELAY 1125
+#define BFA_IOCFC_INTR_LATENCY 225
+#define BFA_BPORT_SYM_NAME 128
+
+/**
+ * Interrupt coalescing configuration.
+ */
+struct bfa_iocfc_intr_attr_s {
+ bfa_boolean_t coalesce; /* enable/disable coalescing */
+ u16 latency; /* latency in microseconds */
+ u16 delay; /* delay in microseconds */
+};
+
+/**
+ * IOC firmware configuraton
+ */
+struct bfa_iocfc_fwcfg_s {
+ u16 num_fabrics; /* number of fabrics */
+ u16 num_lports; /* number of local lports */
+ u16 num_rports; /* number of remote ports */
+ u16 num_ioim_reqs; /* number of IO reqs */
+ u16 num_tskim_reqs; /* task management requests */
+ u16 num_iotm_reqs; /* number of TM IO reqs */
+ u16 num_tsktm_reqs; /* TM task management requests*/
+ u16 num_fcxp_reqs; /* unassisted FC exchanges */
+ u16 num_uf_bufs; /* unsolicited recv buffers */
+ u8 num_cqs;
+ u8 rsvd;
+};
+
+struct bfa_iocfc_drvcfg_s {
+ u16 num_reqq_elems; /* number of req queue elements */
+ u16 num_rspq_elems; /* number of rsp queue elements */
+ u16 num_sgpgs; /* number of total SG pages */
+ u16 num_sboot_tgts; /* number of SAN boot targets */
+ u16 num_sboot_luns; /* number of SAN boot luns */
+ u16 ioc_recover; /* IOC recovery mode */
+ u16 min_cfg; /* minimum configuration */
+ u16 path_tov; /* device path timeout */
+ bfa_boolean_t delay_comp; /* delay completion of
+ failed inflight IOs */
+ u8 fw_disc_enabled;/*
+ * f/w device discovery mode
+ * 1 - f/w disc enabled
+ * 0 - f/w disc not enabled
+ */
+ u8 rport_del_tov; /* rport delete timeout in secs */
+ u8 bport_role; /*
+ * Base port operating mode
+ * 0 - Target mode
+ * 1 - Initiator mode
+ */
+ u16 rsvd;
+};
+/**
+ * IOC configuration
+ */
+struct bfa_iocfc_cfg_s {
+ struct bfa_iocfc_fwcfg_s fwcfg; /* firmware side config */
+ struct bfa_iocfc_drvcfg_s drvcfg; /* driver side config */
+};
+
+/**
+ * IOC firmware IO stats
+ */
+struct bfa_fw_io_stats_s {
+ u32 host_abort; /* IO aborted by host driver*/
+ u32 host_cleanup; /* IO clean up by host driver */
+
+ u32 fw_io_timeout; /* IOs timedout */
+ u32 fw_frm_parse; /* frame parsed by f/w */
+ u32 fw_frm_data; /* fcp_data frame parsed by f/w */
+ u32 fw_frm_rsp; /* fcp_rsp frame parsed by f/w */
+ u32 fw_frm_xfer_rdy; /* xfer_rdy frame parsed by f/w */
+ u32 fw_frm_bls_acc; /* BLS ACC frame parsed by f/w */
+ u32 fw_frm_tgt_abort; /* target ABTS parsed by f/w */
+ u32 fw_frm_unknown; /* unknown parsed by f/w */
+ u32 fw_data_dma; /* f/w DMA'ed the data frame */
+ u32 fw_frm_drop; /* f/w drop the frame */
+
+ u32 rec_timeout; /* FW rec timed out */
+ u32 error_rec; /* FW sending rec on
+ * an error condition*/
+ u32 wait_for_si; /* FW wait for SI */
+ u32 rec_rsp_inval; /* REC rsp invalid */
+ u32 seqr_io_abort; /* target does not know cmd so abort */
+ u32 seqr_io_retry; /* SEQR failed so retry IO */
+
+ u32 itn_cisc_upd_rsp; /* ITN cisc updated on fcp_rsp */
+ u32 itn_cisc_upd_data; /* ITN cisc updated on fcp_data */
+ u32 itn_cisc_upd_xfer_rdy; /* ITN cisc updated on fcp_data */
+
+ u32 fcp_data_lost; /* fcp data lost */
+
+ u32 ro_set_in_xfer_rdy; /* Target set RO in Xfer_rdy frame */
+ u32 xfer_rdy_ooo_err; /* Out of order Xfer_rdy received */
+ u32 xfer_rdy_unknown_err; /* unknown error in xfer_rdy frame */
+
+ u32 io_abort_timeout; /* ABTS timedout */
+ u32 sler_initiated; /* SLER initiated */
+
+ u32 unexp_fcp_rsp; /* fcp response in wrong state */
+
+ u32 fcp_rsp_under_run; /* fcp rsp IO underrun */
+ u32 fcp_rsp_under_run_err; /* fcp rsp IO underrun error */
+ u32 fcp_rsp_over_run; /* fcp rsp IO overrun */
+ u32 fcp_rsp_over_run_err; /* fcp rsp IO overrun error */
+ u32 fcp_rsp_proto_err; /* protocol error in fcp rsp */
+ u32 fcp_rsp_sense_err; /* error in sense info in fcp rsp */
+ u32 fcp_conf_req; /* FCP conf requested */
+
+ u32 tgt_aborted_io; /* target initiated abort */
+
+ u32 ioh_edtov_timeout_event;/* IOH edtov timer popped */
+ u32 ioh_fcp_rsp_excp_event; /* IOH FCP_RSP exception */
+ u32 ioh_fcp_conf_event; /* IOH FCP_CONF */
+ u32 ioh_mult_frm_rsp_event; /* IOH multi_frame FCP_RSP */
+ u32 ioh_hit_class2_event; /* IOH hit class2 */
+ u32 ioh_miss_other_event; /* IOH miss other */
+ u32 ioh_seq_cnt_err_event; /* IOH seq cnt error */
+ u32 ioh_len_err_event; /* IOH len error - fcp_dl !=
+ * bytes xfered */
+ u32 ioh_seq_len_err_event; /* IOH seq len error */
+ u32 ioh_data_oor_event; /* Data out of range */
+ u32 ioh_ro_ooo_event; /* Relative offset out of range */
+ u32 ioh_cpu_owned_event; /* IOH hit -iost owned by f/w */
+ u32 ioh_unexp_frame_event; /* unexpected frame recieved
+ * count */
+ u32 ioh_err_int; /* IOH error int during data-phase
+ * for scsi write
+ */
+};
+
+/**
+ * IOC port firmware stats
+ */
+
+struct bfa_fw_port_fpg_stats_s {
+ u32 intr_evt;
+ u32 intr;
+ u32 intr_excess;
+ u32 intr_cause0;
+ u32 intr_other;
+ u32 intr_other_ign;
+ u32 sig_lost;
+ u32 sig_regained;
+ u32 sync_lost;
+ u32 sync_to;
+ u32 sync_regained;
+ u32 div2_overflow;
+ u32 div2_underflow;
+ u32 efifo_overflow;
+ u32 efifo_underflow;
+ u32 idle_rx;
+ u32 lrr_rx;
+ u32 lr_rx;
+ u32 ols_rx;
+ u32 nos_rx;
+ u32 lip_rx;
+ u32 arbf0_rx;
+ u32 mrk_rx;
+ u32 const_mrk_rx;
+ u32 prim_unknown;
+ u32 rsvd;
+};
+
+
+struct bfa_fw_port_lksm_stats_s {
+ u32 hwsm_success; /* hwsm state machine success */
+ u32 hwsm_fails; /* hwsm fails */
+ u32 hwsm_wdtov; /* hwsm timed out */
+ u32 swsm_success; /* swsm success */
+ u32 swsm_fails; /* swsm fails */
+ u32 swsm_wdtov; /* swsm timed out */
+ u32 busybufs; /* link init failed due to busybuf */
+ u32 buf_waits; /* bufwait state entries */
+ u32 link_fails; /* link failures */
+ u32 psp_errors; /* primitive sequence protocol errors */
+ u32 lr_unexp; /* No. of times LR rx-ed unexpectedly */
+ u32 lrr_unexp; /* No. of times LRR rx-ed unexpectedly */
+ u32 lr_tx; /* No. of times LR tx started */
+ u32 lrr_tx; /* No. of times LRR tx started */
+ u32 ols_tx; /* No. of times OLS tx started */
+ u32 nos_tx; /* No. of times NOS tx started */
+};
+
+
+struct bfa_fw_port_snsm_stats_s {
+ u32 hwsm_success; /* Successful hwsm terminations */
+ u32 hwsm_fails; /* hwsm fail count */
+ u32 hwsm_wdtov; /* hwsm timed out */
+ u32 swsm_success; /* swsm success */
+ u32 swsm_wdtov; /* swsm timed out */
+ u32 error_resets; /* error resets initiated by upsm */
+ u32 sync_lost; /* Sync loss count */
+ u32 sig_lost; /* Signal loss count */
+};
+
+
+struct bfa_fw_port_physm_stats_s {
+ u32 module_inserts; /* Module insert count */
+ u32 module_xtracts; /* Module extracts count */
+ u32 module_invalids; /* Invalid module inserted count */
+ u32 module_read_ign; /* Module validation status ignored */
+ u32 laser_faults; /* Laser fault count */
+ u32 rsvd;
+};
+
+
+struct bfa_fw_fip_stats_s {
+ u32 disc_req; /* Discovery solicit requests */
+ u32 disc_rsp; /* Discovery solicit response */
+ u32 disc_err; /* Discovery advt. parse errors */
+ u32 disc_unsol; /* Discovery unsolicited */
+ u32 disc_timeouts; /* Discovery timeouts */
+ u32 linksvc_unsupp; /* Unsupported link service req */
+ u32 linksvc_err; /* Parse error in link service req */
+ u32 logo_req; /* Number of FIP logos received */
+ u32 clrvlink_req; /* Clear virtual link req */
+ u32 op_unsupp; /* Unsupported FIP operation */
+ u32 untagged; /* Untagged frames (ignored) */
+ u32 rsvd;
+};
+
+
+struct bfa_fw_fcoe_stats_s {
+ u32 cee_linkups; /* CEE link up count */
+ u32 cee_linkdns; /* CEE link down count */
+ u32 fip_linkups; /* FIP link up count */
+ u32 fip_linkdns; /* FIP link up count */
+ u32 fip_fails; /* FIP fail count */
+ u32 rsvd;
+};
+
+/**
+ * IOC firmware FCoE port stats
+ */
+struct bfa_fw_fcoe_port_stats_s {
+ struct bfa_fw_fcoe_stats_s fcoe_stats;
+ struct bfa_fw_fip_stats_s fip_stats;
+};
+
+/**
+ * IOC firmware FC port stats
+ */
+struct bfa_fw_fc_port_stats_s {
+ struct bfa_fw_port_fpg_stats_s fpg_stats;
+ struct bfa_fw_port_physm_stats_s physm_stats;
+ struct bfa_fw_port_snsm_stats_s snsm_stats;
+ struct bfa_fw_port_lksm_stats_s lksm_stats;
+};
+
+/**
+ * IOC firmware FC port stats
+ */
+union bfa_fw_port_stats_s {
+ struct bfa_fw_fc_port_stats_s fc_stats;
+ struct bfa_fw_fcoe_port_stats_s fcoe_stats;
+};
+
+/**
+ * IOC firmware stats
+ */
+struct bfa_fw_stats_s {
+ struct bfa_fw_ioc_stats_s ioc_stats;
+ struct bfa_fw_io_stats_s io_stats;
+ union bfa_fw_port_stats_s port_stats;
+};
+
+/**
+ * IOC statistics
+ */
+struct bfa_iocfc_stats_s {
+ struct bfa_fw_stats_s fw_stats; /* firmware IOC stats */
+};
+
+/**
+ * IOC attributes returned in queries
+ */
+struct bfa_iocfc_attr_s {
+ struct bfa_iocfc_cfg_s config; /* IOCFC config */
+ struct bfa_iocfc_intr_attr_s intr_attr; /* interrupt attr */
+};
+
+#define BFA_IOCFC_PATHTOV_MAX 60
+#define BFA_IOCFC_QDEPTH_MAX 2000
+
+#endif /* __BFA_DEFS_IOC_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h patch/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h 2009-03-14 11:44:58.145540000 -0700
@@ -0,0 +1,149 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_IOC_H__
+#define __BFA_DEFS_IOC_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_version.h>
+#include <defs/bfa_defs_adapter.h>
+#include <defs/bfa_defs_pm.h>
+
+enum {
+ BFA_IOC_DRIVER_LEN = 16,
+ BFA_IOC_CHIP_REV_LEN = 8,
+};
+
+/**
+ * Driver and firmware versions.
+ */
+struct bfa_ioc_driver_attr_s {
+ char driver[BFA_IOC_DRIVER_LEN]; /* driver name */
+ char driver_ver[BFA_VERSION_LEN]; /* driver version */
+ char fw_ver[BFA_VERSION_LEN]; /* firmware version*/
+ char bios_ver[BFA_VERSION_LEN]; /* bios version */
+ char efi_ver[BFA_VERSION_LEN]; /* EFI version */
+ char ob_ver[BFA_VERSION_LEN]; /* openboot version*/
+};
+
+/**
+ * IOC PCI device attributes
+ */
+struct bfa_ioc_pci_attr_s {
+ u16 vendor_id; /* PCI vendor ID */
+ u16 device_id; /* PCI device ID */
+ u16 ssid; /* subsystem ID */
+ u16 ssvid; /* subsystem vendor ID */
+ u32 pcifn; /* PCI device function */
+ u32 rsvd; /* padding */
+ u8 chip_rev[BFA_IOC_CHIP_REV_LEN]; /* chip revision */
+};
+
+/**
+ * IOC states
+ */
+enum bfa_ioc_state {
+ BFA_IOC_RESET = 1, /* IOC is in reset state */
+ BFA_IOC_SEMWAIT = 2, /* Waiting for IOC hardware semaphore */
+ BFA_IOC_HWINIT = 3, /* IOC hardware is being initialized */
+ BFA_IOC_GETATTR = 4, /* IOC is being configured */
+ BFA_IOC_OPERATIONAL = 5, /* IOC is operational */
+ BFA_IOC_INITFAIL = 6, /* IOC hardware failure */
+ BFA_IOC_HBFAIL = 7, /* IOC heart-beat failure */
+ BFA_IOC_DISABLING = 8, /* IOC is being disabled */
+ BFA_IOC_DISABLED = 9, /* IOC is disabled */
+};
+
+/**
+ * IOC firmware stats
+ */
+struct bfa_fw_ioc_stats_s {
+ u32 hb_count;
+ u32 cfg_reqs;
+ u32 enable_reqs;
+ u32 disable_reqs;
+ u32 stats_reqs;
+ u32 clrstats_reqs;
+ u32 unknown_reqs;
+ u32 ic_reqs; /* interrupt coalesce reqs */
+};
+
+/**
+ * IOC driver stats
+ */
+struct bfa_ioc_drv_stats_s {
+ u32 ioc_isrs;
+ u32 ioc_enables;
+ u32 ioc_disables;
+ u32 ioc_hbfails;
+ u32 ioc_boots;
+ u32 stats_tmos;
+ u32 hb_count;
+ u32 disable_reqs;
+ u32 enable_reqs;
+ u32 disable_replies;
+ u32 enable_replies;
+};
+
+/**
+ * IOC statistics
+ */
+struct bfa_ioc_stats_s {
+ struct bfa_ioc_drv_stats_s drv_stats; /* driver IOC stats */
+ struct bfa_fw_ioc_stats_s fw_stats; /* firmware IOC stats */
+};
+
+
+enum bfa_ioc_type_e {
+ BFA_IOC_TYPE_FC = 1,
+ BFA_IOC_TYPE_FCoE = 2,
+ BFA_IOC_TYPE_LL = 3,
+};
+
+/**
+ * IOC attributes returned in queries
+ */
+struct bfa_ioc_attr_s {
+ enum bfa_ioc_type_e ioc_type;
+ enum bfa_ioc_state state; /* IOC state */
+ struct bfa_adapter_attr_s adapter_attr; /* HBA attributes */
+ struct bfa_ioc_driver_attr_s driver_attr; /* driver attr */
+ struct bfa_ioc_pci_attr_s pci_attr;
+ u8 port_id; /* port number */
+};
+
+/**
+ * BFA IOC level events
+ */
+enum bfa_ioc_aen_event {
+ BFA_IOC_AEN_HBGOOD = 1, /* Heart Beat restore event */
+ BFA_IOC_AEN_HBFAIL = 2, /* Heart Beat failure event */
+ BFA_IOC_AEN_ENABLE = 3, /* IOC enabled event */
+ BFA_IOC_AEN_DISABLE = 4, /* IOC disabled event */
+};
+
+/**
+ * BFA IOC level event data, now just a place holder
+ */
+struct bfa_ioc_aen_data_s {
+ wwn_t pwwn;
+ mac_t mac;
+};
+
+#endif /* __BFA_DEFS_IOC_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_ipfc.h patch/drivers/scsi/bfa/include/defs/bfa_defs_ipfc.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_ipfc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_ipfc.h 2009-03-14 11:44:58.152084000 -0700
@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_IPFC_H__
+#define __BFA_DEFS_IPFC_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+
+/**
+ * FCS ip remote port states
+ */
+enum bfa_iprp_state {
+ BFA_IPRP_UNINIT = 0, /* PORT is not yet initialized */
+ BFA_IPRP_ONLINE = 1, /* process login is complete */
+ BFA_IPRP_OFFLINE = 2, /* iprp is offline */
+};
+
+/**
+ * FCS remote port statistics
+ */
+struct bfa_iprp_stats_s {
+ u32 offlines;
+ u32 onlines;
+ u32 rscns;
+ u32 plogis;
+ u32 logos;
+ u32 plogi_timeouts;
+ u32 plogi_rejects;
+};
+
+/**
+ * FCS iprp attribute returned in queries
+ */
+struct bfa_iprp_attr_s {
+ enum bfa_iprp_state state;
+};
+
+struct bfa_ipfc_stats_s {
+ u32 arp_sent;
+ u32 arp_recv;
+ u32 arp_reply_sent;
+ u32 arp_reply_recv;
+ u32 farp_sent;
+ u32 farp_recv;
+ u32 farp_reply_sent;
+ u32 farp_reply_recv;
+ u32 farp_reject_sent;
+ u32 farp_reject_recv;
+};
+
+struct bfa_ipfc_attr_s {
+ bfa_boolean_t enabled;
+};
+
+#endif /* __BFA_DEFS_IPFC_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_itnim.h patch/drivers/scsi/bfa/include/defs/bfa_defs_itnim.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_itnim.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_itnim.h 2009-03-14 11:44:58.158805000 -0700
@@ -0,0 +1,124 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_ITNIM_H__
+#define __BFA_DEFS_ITNIM_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+
+/**
+ * FCS itnim states
+ */
+enum bfa_itnim_state {
+ BFA_ITNIM_OFFLINE = 0, /* offline */
+ BFA_ITNIM_PRLI_SEND = 1, /* prli send */
+ BFA_ITNIM_PRLI_SENT = 2, /* prli sent */
+ BFA_ITNIM_PRLI_RETRY = 3, /* prli retry */
+ BFA_ITNIM_HCB_ONLINE = 4, /* online callback */
+ BFA_ITNIM_ONLINE = 5, /* online */
+ BFA_ITNIM_HCB_OFFLINE = 6, /* offline callback */
+ BFA_ITNIM_INITIATIOR = 7, /* initiator */
+};
+
+struct bfa_itnim_hal_stats_s {
+ u32 onlines; /* ITN nexus onlines (PRLI done) */
+ u32 offlines; /* ITN Nexus offlines */
+ u32 creates; /* ITN create requests */
+ u32 deletes; /* ITN delete requests */
+ u32 create_comps; /* ITN create completions */
+ u32 delete_comps; /* ITN delete completions */
+ u32 sler_events; /* SLER (sequence level error
+ * recovery) events */
+ u32 ioc_disabled; /* Num IOC disables */
+ u32 cleanup_comps; /* ITN cleanup completions */
+ u32 tm_cmnds; /* task management(TM) cmnds sent */
+ u32 tm_fw_rsps; /* TM cmds firmware responses */
+ u32 tm_success; /* TM successes */
+ u32 tm_failures; /* TM failures */
+ u32 tm_io_comps; /* TM IO completions */
+ u32 tm_qresumes; /* TM queue resumes (after waiting
+ * for resources)
+ */
+ u32 tm_iocdowns; /* TM cmnds affected by IOC down */
+ u32 tm_cleanups; /* TM cleanups */
+ u32 tm_cleanup_comps;
+ /* TM cleanup completions */
+ u32 ios; /* IO requests */
+ u32 io_comps; /* IO completions */
+};
+
+/**
+ * FCS remote port statistics
+ */
+struct bfa_itnim_stats_s {
+ u32 onlines; /* num rport online */
+ u32 offlines; /* num rport offline */
+ u32 prli_sent; /* num prli sent out */
+ u32 fcxp_alloc_wait;/* num fcxp alloc waits */
+ u32 prli_rsp_err; /* num prli rsp errors */
+ u32 prli_rsp_acc; /* num prli rsp accepts */
+ u32 initiator; /* rport is an initiator */
+ u32 prli_rsp_parse_err; /* prli rsp parsing errors */
+ u32 prli_rsp_rjt; /* num prli rsp rejects */
+ u32 timeout; /* num timeouts detected */
+ u32 sler; /* num sler notification from BFA */
+ u32 rsvd;
+ struct bfa_itnim_hal_stats_s hal_stats;
+};
+
+/**
+ * FCS itnim attributes returned in queries
+ */
+struct bfa_itnim_attr_s {
+ enum bfa_itnim_state state; /* FCS itnim state */
+ u8 retry; /* data retransmision support */
+ u8 task_retry_id; /* task retry ident support */
+ u8 rec_support; /* REC supported */
+ u8 conf_comp; /* confirmed completion supp */
+};
+
+/**
+ * BFA ITNIM events.
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_ITNIM_AEN_NEW: [in]: None [out]: vf_id, lpwwn
+ * BFA_ITNIM_AEN_DELETE: [in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ * [out]: vf_id, ppwwn, lpwwn, rpwwn
+ * BFA_ITNIM_AEN_ONLINE: [in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ * [out]: vf_id, ppwwn, lpwwn, rpwwn
+ * BFA_ITNIM_AEN_OFFLINE: [in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ * [out]: vf_id, ppwwn, lpwwn, rpwwn
+ * BFA_ITNIM_AEN_DISCONNECT:[in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ * [out]: vf_id, ppwwn, lpwwn, rpwwn
+ */
+enum bfa_itnim_aen_event {
+ BFA_ITNIM_AEN_ONLINE = 1, /* Target online */
+ BFA_ITNIM_AEN_OFFLINE = 2, /* Target offline */
+ BFA_ITNIM_AEN_DISCONNECT = 3, /* Target disconnected */
+};
+
+/**
+ * BFA ITNIM event data structure.
+ */
+struct bfa_itnim_aen_data_s {
+ u16 vf_id; /* vf_id of the IT nexus */
+ u16 rsvd[3];
+ wwn_t ppwwn; /* WWN of its physical port */
+ wwn_t lpwwn; /* WWN of logical port */
+ wwn_t rpwwn; /* WWN of remote(target) port */
+};
+
+#endif /* __BFA_DEFS_ITNIM_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_itntm.h patch/drivers/scsi/bfa/include/defs/bfa_defs_itntm.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_itntm.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_itntm.h 2009-03-14 11:44:58.328761000 -0700
@@ -0,0 +1,118 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_ITNTM_H__
+#define __BFA_DEFS_ITNTM_H__
+
+#include <protocol/types.h>
+#include <protocol/fc.h>
+
+/**
+ * FCS itntm states
+ */
+enum bfa_itntm_state_e {
+ BFA_ITNTM_SM_OFFLINE = 0, /* itntm is offline */
+ BFA_ITNTM_SM_WOS_LOGIN = 1, /* Waiting PRLI ACC/RJT from ULP */
+ BFA_ITNTM_SM_WFW_ONLINE = 2, /* Waiting ACK to PRLI ACC from FW */
+ BFA_ITNTM_SM_ONLINE = 3, /* itntm login is complete */
+ BFA_ITNTM_SM_WIO_RELOGIN = 4, /* itntm relogin is in progress */
+ BFA_ITNTM_SM_WIO_LOGOUT = 5, /* Processing of PRLO req from
+ * Initiator is in progress
+ */
+ BFA_ITNTM_SM_WOS_LOGOUT = 6, /* Processing of PRLO req from
+ * Initiator is in progress
+ */
+ BFA_ITNTM_SM_WIO_CLEAN = 7, /* Waiting for IO cleanup before itntm
+ * is offline. This can be triggered
+ * by RPORT LOGO (rcvd/sent) or by
+ * PRLO (rcvd/sent)
+ */
+};
+
+struct bfa_prli_req_s {
+ struct fchs_s fchs;
+ fc_prli_t prli_payload;
+};
+
+struct bfa_prlo_req_s {
+ struct fchs_s fchs;
+ fc_prlo_t prlo_payload;
+};
+
+void bfa_itntm_send_login_rsp(void *bfa_itntm, u32 login_rsp,
+ fc_ls_rjt_t rjt_payload);
+void bfa_itntm_send_logout_rsp(void *bfa_itntm, u32 logout_rsp,
+ fc_ls_rjt_t rjt_payload);
+/**
+ * FCS target port statistics
+ */
+struct bfa_itntm_stats_s {
+ u32 onlines; /* I-T Nexus onlines (PRLI done) */
+ u32 offlines; /* I-T Nexus offlines */
+ u32 prli_req_parse_err; /* prli req parsing errors */
+ u32 prli_rsp_rjt; /* num prli rsp rejects sent */
+ u32 prli_rsp_acc; /* num prli rsp accepts sent */
+ u32 cleanup_comps; /* I-T Nexus cleanup completions */
+};
+
+/**
+ * FCS itntm attributes returned in queries
+ */
+struct bfa_itntm_attr_s {
+ enum bfa_itntm_state_e state;
+ u8 seq_retry; /* Sequence retry supported */
+ u8 rsvd[3];
+};
+
+/**
+ * BFA ITNTM async event data structure for BFAL
+ */
+enum bfa_itntm_aen_event {
+ BFA_ITNTM_AEN_ONLINE = 1, /* Target online */
+ BFA_ITNTM_AEN_OFFLINE = 2, /* Target offline */
+ BFA_ITNTM_AEN_DISCONNECT = 3, /* Target disconnected */
+};
+
+/**
+ * BFA ITNTM event data structure.
+ */
+struct bfa_itntm_aen_data_s {
+ u16 vf_id; /* vf_id of the IT nexus */
+ u16 rsvd[3];
+ wwn_t lpwwn; /* WWN of logical port */
+ wwn_t rpwwn; /* WWN of remote(target) port */
+};
+
+/**
+ * Below APIs are needed from BFA driver
+ * Move these to BFA driver public header file?
+ */
+/* ITNTM rcvd new PRLI & gets bfad_itntm_t ptr from driver this callback */
+void *bfad_itntm_rcvd_login_req(void *bfad_tm_port, void *bfa_itntm,
+ wwn_t rp_wwn, u32 rp_fcid,
+ struct bfa_prli_req_s prli_req);
+/* ITNTM rcvd new PRLO */
+void bfad_itntm_rcvd_logout_req(void *bfad_itntm, wwn_t rp_wwn, u32 rp_fcid,
+ struct bfa_prlo_req_s prlo_req);
+/* ITNTM is online and ready for IO */
+void bfad_itntm_online(void *bfad_itntm);
+/* ITNTM is offline and BFA driver can shutdown its upper stack */
+void bfad_itntm_offline(void *bfad_itntm);
+/* ITNTM does not need this BFA driver itntm tag anymore, so can be freed */
+void bfad_itntm_res_free(void *bfad_itntm);
+
+#endif /* __BFA_DEFS_ITNTM_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_led.h patch/drivers/scsi/bfa/include/defs/bfa_defs_led.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_led.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_led.h 2009-03-14 11:44:58.271876000 -0700
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_LED_H__
+#define __BFA_DEFS_LED_H__
+
+#define BFA_LED_MAX_NUM 3
+
+enum bfa_led_op {
+ BFA_LED_OFF = 0,
+ BFA_LED_ON = 1,
+ BFA_LED_FLICK = 2,
+ BFA_LED_BLINK = 3,
+};
+
+enum bfa_led_color {
+ BFA_LED_GREEN = 0,
+ BFA_LED_AMBER = 1,
+};
+
+#endif /* __BFA_DEFS_LED_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_lport.h patch/drivers/scsi/bfa/include/defs/bfa_defs_lport.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_lport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_lport.h 2009-03-14 11:44:58.279322000 -0700
@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_LPORT_H__
+#define __BFA_DEFS_LPORT_H__
+
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_port.h>
+
+/**
+ * BFA AEN logical port events.
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_LPORT_AEN_NEW: [in]: None [out]: vf_id, ppwwn, lpwwn, roles
+ * BFA_LPORT_AEN_DELETE: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_ONLINE: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_OFFLINE: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_DISCONNECT:[in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NEW_PROP: [in]: None [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_DELETE_PROP: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NEW_STANDARD: [in]: None [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_DELETE_STANDARD: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NPIV_DUP_WWN: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NPIV_FABRIC_MAX: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NPIV_UNKNOWN: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ */
+enum bfa_lport_aen_event {
+ BFA_LPORT_AEN_NEW = 1, /* LPort created event */
+ BFA_LPORT_AEN_DELETE = 2, /* LPort deleted event */
+ BFA_LPORT_AEN_ONLINE = 3, /* LPort online event */
+ BFA_LPORT_AEN_OFFLINE = 4, /* LPort offline event */
+ BFA_LPORT_AEN_DISCONNECT = 5, /* LPort disconnect event */
+ BFA_LPORT_AEN_NEW_PROP = 6, /* VPort created event */
+ BFA_LPORT_AEN_DELETE_PROP = 7, /* VPort deleted event */
+ BFA_LPORT_AEN_NEW_STANDARD = 8, /* VPort created event */
+ BFA_LPORT_AEN_DELETE_STANDARD = 9, /* VPort deleted event */
+ BFA_LPORT_AEN_NPIV_DUP_WWN = 10, /* VPort configured with
+ * duplicate WWN event
+ */
+ BFA_LPORT_AEN_NPIV_FABRIC_MAX = 11, /* Max NPIV in fabric/fport */
+ BFA_LPORT_AEN_NPIV_UNKNOWN = 12, /* Unknown NPIV Error code event */
+};
+
+/**
+ * BFA AEN event data structure
+ */
+struct bfa_lport_aen_data_s {
+ u16 vf_id; /* vf_id of this logical port */
+ u16 rsvd;
+ enum bfa_port_role roles; /* Logical port mode,IM/TM/IP etc */
+ wwn_t ppwwn; /* WWN of its physical port */
+ wwn_t lpwwn; /* WWN of this logical port */
+};
+
+#endif /* __BFA_DEFS_LPORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h patch/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h 2009-03-14 11:44:58.356960000 -0700
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_MFG_H__
+#define __BFA_DEFS_MFG_H__
+
+#include <bfa_os_inc.h>
+
+/**
+ * Manufacturing block version
+ */
+#define BFA_MFG_VERSION 1
+
+/**
+ * Manufacturing block format
+ */
+#define BFA_MFG_SERIALNUM_SIZE 11
+#define BFA_MFG_PARTNUM_SIZE 14
+#define BFA_MFG_SUPPLIER_ID_SIZE 10
+#define BFA_MFG_SUPPLIER_PARTNUM_SIZE 20
+#define BFA_MFG_SUPPLIER_SERIALNUM_SIZE 20
+#define BFA_MFG_SUPPLIER_REVISION_SIZE 4
+#define STRSZ(_n) (((_n) + 4) & ~3)
+
+/**
+ * VPD data length
+ */
+#define BFA_MFG_VPD_LEN 256
+
+/**
+ * All numerical fields are in big-endian format.
+ */
+struct bfa_mfg_vpd_s {
+ u8 version; /* vpd data version */
+ u8 vpd_sig[3]; /* characters 'V', 'P', 'D' */
+ u8 chksum; /* u8 checksum */
+ u8 vendor; /* vendor */
+ u8 len; /* vpd data length excluding header */
+ u8 rsv;
+ u8 data[BFA_MFG_VPD_LEN]; /* vpd data */
+};
+
+#pragma pack(1)
+
+#endif /* __BFA_DEFS_MFG_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_pbind.h patch/drivers/scsi/bfa/include/defs/bfa_defs_pbind.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_pbind.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_pbind.h 2009-03-14 11:44:58.227586000 -0700
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PBIND_H__
+#define __BFA_DEFS_PBIND_H__
+
+#include <protocol/types.h>
+#include <bfad_config.h>
+
+/**
+ * cs_pbind_doc
+ */
+#define BFA_PBIND_MAKE_OSTID(bus, target) \
+ (((u16)(bus) << BFAD_CONFIG_MAX_TARGETS_PER_BUS_SHIFT) | (target))
+#define BFA_PBIND_GET_OSBUS(os_tid) \
+ (u8)((os_tid) >> BFAD_CONFIG_MAX_TARGETS_PER_BUS_SHIFT)
+#define BFA_PBIND_GET_OSTARGET(os_tid) \
+ (u8)((os_tid) & ((1 << BFAD_CONFIG_MAX_TARGETS_PER_BUS_SHIFT) - 1))
+
+#define BFA_PBIND_BY_DID 0x0001
+#define BFA_PBIND_BY_PWWN 0x0002
+#define BFA_PBIND_BY_NWWN 0x0004
+#define BFA_PBIND_BY_LUID 0x0008
+#define BFA_PBIND_BY_LUNS 0x0400
+#define BFA_PBIND_BY_TARGETS 0x0800
+#define BFA_PBIND_BY_AUTOMAP 0x1000
+#define BFA_PBIND_BY_CONFIGURED 0x2000
+
+/**
+ * Target persistent binding entry in memory.
+ */
+struct bfa_pbind_map_s {
+ /* wwn_t rnwwn; */ /* remote target node wwn */
+ wwn_t rpwwn; /* remote target port wwn */
+ wwn_t lpwwn; /* scope: local port (base or vport) */
+ u16 vf_id; /* scope: vf */
+ u16 os_tid; /* mapped OS target ID */
+ u32 rsvd; /* mapped OS target ID */
+};
+
+struct bfa_pbind_table_s {
+ u32 table_size;
+ u32 num_pbind_entries;
+ struct bfa_pbind_map_s pbind_map[BFAD_CONFIG_MAX_FCP_TARGETS];
+};
+
+
+#endif /* __BFA_DEFS_PBIND_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_pci.h patch/drivers/scsi/bfa/include/defs/bfa_defs_pci.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_pci.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_pci.h 2009-03-14 11:44:58.286510000 -0700
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PCI_H__
+#define __BFA_DEFS_PCI_H__
+
+/**
+ * PCI device and vendor ID information
+ */
+enum {
+ BFA_PCI_VENDOR_ID_BROCADE = 0x1657,
+ BFA_PCI_DEVICE_ID_FC_8G2P = 0x13,
+ BFA_PCI_DEVICE_ID_FC_8G1P = 0x17,
+ BFA_PCI_DEVICE_ID_CT = 0x14,
+};
+
+/**
+ * PCI sub-system device and vendor ID information
+ */
+enum {
+ BFA_PCI_FCOE_SSDEVICE_ID = 0x14,
+};
+
+#define BFA_PCI_ACCESS_RANGES 1 /* Maximum number of device address ranges
+ * mapped through different BAR(s). */
+
+#endif /* __BFA_DEFS_PCI_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_pm.h patch/drivers/scsi/bfa/include/defs/bfa_defs_pm.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_pm.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_pm.h 2009-03-14 11:44:58.165458000 -0700
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PM_H__
+#define __BFA_DEFS_PM_H__
+
+#include <bfa_os_inc.h>
+
+/**
+ * BFA power management device states
+ */
+enum bfa_pm_ds {
+ BFA_PM_DS_D0 = 0, /* full power mode */
+ BFA_PM_DS_D1 = 1, /* power save state 1 */
+ BFA_PM_DS_D2 = 2, /* power save state 2 */
+ BFA_PM_DS_D3 = 3, /* power off state */
+};
+
+#endif /* __BFA_DEFS_PM_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_pom.h patch/drivers/scsi/bfa/include/defs/bfa_defs_pom.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_pom.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_pom.h 2009-03-14 11:44:58.206408000 -0700
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_POM_H__
+#define __BFA_DEFS_POM_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_types.h>
+
+/**
+ * POM health status levels for each attributes.
+ */
+enum bfa_pom_entry_health {
+ BFA_POM_HEALTH_NOINFO = 1, /* no information */
+ BFA_POM_HEALTH_NORMAL = 2, /* health is normal */
+ BFA_POM_HEALTH_WARNING = 3, /* warning level */
+ BFA_POM_HEALTH_ALARM = 4, /* alarming level */
+};
+
+/**
+ * Reading of temperature/voltage/current/power
+ */
+struct bfa_pom_entry_s {
+ enum bfa_pom_entry_health health; /* POM entry health */
+ u32 curr_value; /* current value */
+ u32 thr_warn_high; /* threshold warning high */
+ u32 thr_warn_low; /* threshold warning low */
+ u32 thr_alarm_low; /* threshold alaram low */
+ u32 thr_alarm_high; /* threshold alarm high */
+};
+
+/**
+ * POM attributes
+ */
+struct bfa_pom_attr_s {
+ struct bfa_pom_entry_s temperature; /* centigrade */
+ struct bfa_pom_entry_s voltage; /* volts */
+ struct bfa_pom_entry_s curr; /* milli amps */
+ struct bfa_pom_entry_s txpower; /* micro watts */
+ struct bfa_pom_entry_s rxpower; /* micro watts */
+};
+
+#endif /* __BFA_DEFS_POM_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_port.h patch/drivers/scsi/bfa/include/defs/bfa_defs_port.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_port.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_port.h 2009-03-14 11:44:58.172264000 -0700
@@ -0,0 +1,234 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PORT_H__
+#define __BFA_DEFS_PORT_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+#include <defs/bfa_defs_pport.h>
+
+#define BFA_FCS_FABRIC_IPADDR_SZ 16
+
+/**
+ * symbolic names for base port/virtual port
+ */
+#define BFA_SYMNAME_MAXLEN 128 /* vmware/windows uses 128 bytes */
+struct bfa_port_symname_s {
+ char symname[BFA_SYMNAME_MAXLEN];
+};
+
+/**
+* Roles of FCS port:
+ * - FCP IM and FCP TM roles cannot be enabled together for a FCS port
+ * - Create multiple ports if both IM and TM functions required.
+ * - Atleast one role must be specified.
+ */
+enum bfa_port_role {
+ BFA_PORT_ROLE_FCP_IM = 0x01, /* FCP initiator role */
+ BFA_PORT_ROLE_FCP_TM = 0x02, /* FCP target role */
+ BFA_PORT_ROLE_FCP_IPFC = 0x04, /* IP over FC role */
+ BFA_PORT_ROLE_FCP_MAX = BFA_PORT_ROLE_FCP_IPFC | BFA_PORT_ROLE_FCP_IM
+};
+
+/**
+ * FCS port configuration.
+ */
+struct bfa_port_cfg_s {
+ wwn_t pwwn; /* port wwn */
+ wwn_t nwwn; /* node wwn */
+ enum bfa_port_role roles; /* FCS port roles */
+ struct bfa_port_symname_s sym_name; /* vm port symbolic name */
+ u8 tag[16]; /* opaque tag from application */
+};
+
+/**
+ * FCS port states
+ */
+enum bfa_port_state {
+ BFA_PORT_UNINIT = 0, /* PORT is not yet initialized */
+ BFA_PORT_FDISC = 1, /* FDISC is in progress */
+ BFA_PORT_ONLINE = 2, /* login to fabric is complete */
+ BFA_PORT_OFFLINE = 3, /* No login to fabric */
+};
+
+/**
+ * FCS port type. Required for VmWare.
+ */
+enum bfa_port_type {
+ BFA_PORT_TYPE_PHYSICAL = 0,
+ BFA_PORT_TYPE_VIRTUAL,
+};
+
+/**
+ * FCS port offline reason. Required for VmWare.
+ */
+enum bfa_port_offline_reason {
+ BFA_PORT_OFFLINE_UNKNOWN = 0,
+ BFA_PORT_OFFLINE_LINKDOWN,
+ BFA_PORT_OFFLINE_FAB_UNSUPPORTED, /* NPIV not supported by the
+ * fabric */
+ BFA_PORT_OFFLINE_FAB_NORESOURCES,
+ BFA_PORT_OFFLINE_FAB_LOGOUT,
+};
+
+/**
+ * FCS lport info. Required for VmWare.
+ */
+struct bfa_port_info_s {
+ u8 port_type; /* bfa_port_type_t : physical or
+ * virtual */
+ u8 port_state; /* one of bfa_port_state values */
+ u8 offline_reason; /* one of bfa_port_offline_reason_t
+ * values */
+ wwn_t port_wwn;
+ wwn_t node_wwn;
+
+ /*
+ * following 4 feilds are valid for Physical Ports only
+ */
+ u32 max_vports_supp; /* Max supported vports */
+ u32 num_vports_inuse; /* Num of in use vports */
+ u32 max_rports_supp; /* Max supported rports */
+ u32 num_rports_inuse; /* Num of doscovered rports */
+
+};
+
+/**
+ * FCS port statistics
+ */
+struct bfa_port_stats_s {
+ u32 ns_plogi_sent;
+ u32 ns_plogi_rsp_err;
+ u32 ns_plogi_acc_err;
+ u32 ns_plogi_accepts;
+ u32 ns_rejects; /* NS command rejects */
+ u32 ns_plogi_unknown_rsp;
+ u32 ns_plogi_alloc_wait;
+
+ u32 ns_retries; /* NS command retries */
+ u32 ns_timeouts; /* NS command timeouts */
+
+ u32 ns_rspnid_sent;
+ u32 ns_rspnid_accepts;
+ u32 ns_rspnid_rsp_err;
+ u32 ns_rspnid_rejects;
+ u32 ns_rspnid_alloc_wait;
+
+ u32 ns_rftid_sent;
+ u32 ns_rftid_accepts;
+ u32 ns_rftid_rsp_err;
+ u32 ns_rftid_rejects;
+ u32 ns_rftid_alloc_wait;
+
+ u32 ns_rffid_sent;
+ u32 ns_rffid_accepts;
+ u32 ns_rffid_rsp_err;
+ u32 ns_rffid_rejects;
+ u32 ns_rffid_alloc_wait;
+
+ u32 ns_gidft_sent;
+ u32 ns_gidft_accepts;
+ u32 ns_gidft_rsp_err;
+ u32 ns_gidft_rejects;
+ u32 ns_gidft_unknown_rsp;
+ u32 ns_gidft_alloc_wait;
+
+ /*
+ * Mgmt Server stats
+ */
+ u32 ms_retries; /* MS command retries */
+ u32 ms_timeouts; /* MS command timeouts */
+ u32 ms_plogi_sent;
+ u32 ms_plogi_rsp_err;
+ u32 ms_plogi_acc_err;
+ u32 ms_plogi_accepts;
+ u32 ms_rejects; /* NS command rejects */
+ u32 ms_plogi_unknown_rsp;
+ u32 ms_plogi_alloc_wait;
+
+ u32 num_rscn; /* Num of RSCN received */
+ u32 num_portid_rscn;/* Num portid format RSCN
+ * received */
+
+ u32 uf_recvs; /* unsolicited recv frames */
+ u32 uf_recv_drops; /* dropped received frames */
+
+ u32 rsvd; /* padding for 64 bit alignment */
+};
+
+/**
+ * BFA port attribute returned in queries
+ */
+struct bfa_port_attr_s {
+ enum bfa_port_state state; /* port state */
+ u32 pid; /* port ID */
+ struct bfa_port_cfg_s port_cfg; /* port configuration */
+ enum bfa_pport_type port_type; /* current topology */
+ u32 loopback; /* cable is externally looped back */
+ wwn_t fabric_name; /* attached switch's nwwn */
+ u8 fabric_ip_addr[BFA_FCS_FABRIC_IPADDR_SZ]; /* attached
+ * fabric's ip addr */
+};
+
+/**
+ * BFA physical port Level events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_PORT_AEN_ONLINE: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_OFFLINE: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_RLIR: [in]: None [out]: pwwn, rlir_data, rlir_len
+ * BFA_PORT_AEN_SFP_INSERT: [in]: pwwn [out]: port_id, pwwn
+ * BFA_PORT_AEN_SFP_REMOVE: [in]: pwwn [out]: port_id, pwwn
+ * BFA_PORT_AEN_SFP_POM: [in]: pwwn [out]: level, port_id, pwwn
+ * BFA_PORT_AEN_ENABLE: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_DISABLE: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_AUTH_ON: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_AUTH_OFF: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_DISCONNECT: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_QOS_NEG: [in]: pwwn [out]: pwwn
+ *
+ */
+enum bfa_port_aen_event {
+ BFA_PORT_AEN_ONLINE = 1, /* Physical Port online event */
+ BFA_PORT_AEN_OFFLINE = 2, /* Physical Port offline event */
+ BFA_PORT_AEN_RLIR = 3, /* RLIR event, not supported */
+ BFA_PORT_AEN_SFP_INSERT = 4, /* SFP inserted event */
+ BFA_PORT_AEN_SFP_REMOVE = 5, /* SFP removed event */
+ BFA_PORT_AEN_SFP_POM = 6, /* SFP POM event */
+ BFA_PORT_AEN_ENABLE = 7, /* Physical Port enable event */
+ BFA_PORT_AEN_DISABLE = 8, /* Physical Port disable event */
+ BFA_PORT_AEN_AUTH_ON = 9, /* Physical Port auth success event */
+ BFA_PORT_AEN_AUTH_OFF = 10, /* Physical Port auth fail event */
+ BFA_PORT_AEN_DISCONNECT = 11, /* Physical Port disconnect event */
+ BFA_PORT_AEN_QOS_NEG = 12, /* Base Port QOS negotiation event */
+};
+
+enum bfa_port_aen_sfp_pom {
+ BFA_PORT_AEN_SFP_POM_GREEN = 1, /* Normal */
+ BFA_PORT_AEN_SFP_POM_AMBER = 2, /* Warning */
+ BFA_PORT_AEN_SFP_POM_RED = 3, /* Critical */
+ BFA_PORT_AEN_SFP_POM_MAX = BFA_PORT_AEN_SFP_POM_RED
+};
+
+struct bfa_port_aen_data_s {
+ wwn_t pwwn; /* WWN of the physical port */
+ int phy_port_num; /*! For SFP related events */
+ enum bfa_port_aen_sfp_pom level; /* Only transitions will
+ * be informed */
+};
+
+#endif /* __BFA_DEFS_PORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_pport.h patch/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_pport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_pport.h 2009-03-14 11:44:58.179384000 -0700
@@ -0,0 +1,340 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PPORT_H__
+#define __BFA_DEFS_PPORT_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/fc.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_qos.h>
+#include <cna/pstats/phyport_defs.h>
+
+/* Modify char* port_stt[] in bfal_port.c if a new state was added */
+enum bfa_pport_states {
+ BFA_PPORT_ST_UNINIT = 1,
+ BFA_PPORT_ST_ENABLING_QWAIT = 2,
+ BFA_PPORT_ST_ENABLING = 3,
+ BFA_PPORT_ST_LINKDOWN = 4,
+ BFA_PPORT_ST_LINKUP = 5,
+ BFA_PPORT_ST_DISABLING_QWAIT = 6,
+ BFA_PPORT_ST_DISABLING = 7,
+ BFA_PPORT_ST_DISABLED = 8,
+ BFA_PPORT_ST_STOPPED = 9,
+ BFA_PPORT_ST_IOCDOWN = 10,
+ BFA_PPORT_ST_MAX_STATE,
+};
+
+/**
+ * Port speed settings. Each specific speed is a bit field. Use multiple
+ * bits to specify speeds to be selected for auto-negotiation.
+ */
+enum bfa_pport_speed {
+ BFA_PPORT_SPEED_UNKNOWN = 0,
+ BFA_PPORT_SPEED_1GBPS = 1,
+ BFA_PPORT_SPEED_2GBPS = 2,
+ BFA_PPORT_SPEED_4GBPS = 4,
+ BFA_PPORT_SPEED_8GBPS = 8,
+ BFA_PPORT_SPEED_10GBPS = 10,
+ BFA_PPORT_SPEED_AUTO =
+ (BFA_PPORT_SPEED_1GBPS | BFA_PPORT_SPEED_2GBPS |
+ BFA_PPORT_SPEED_4GBPS | BFA_PPORT_SPEED_8GBPS),
+};
+
+/**
+ * Port operational type (in sync with SNIA port type).
+ */
+enum bfa_pport_type {
+ BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unkown */
+ BFA_PPORT_TYPE_TRUNKED = 2, /* Trunked mode */
+ BFA_PPORT_TYPE_NPORT = 5, /* P2P with switched fabric */
+ BFA_PPORT_TYPE_NLPORT = 6, /* public loop */
+ BFA_PPORT_TYPE_LPORT = 20, /* private loop */
+ BFA_PPORT_TYPE_P2P = 21, /* P2P with no switched fabric */
+ BFA_PPORT_TYPE_VPORT = 22, /* NPIV - virtual port */
+};
+
+/**
+ * Port topology setting. A port's topology and fabric login status
+ * determine its operational type.
+ */
+enum bfa_pport_topology {
+ BFA_PPORT_TOPOLOGY_NONE = 0, /* No valid topology */
+ BFA_PPORT_TOPOLOGY_P2P = 1, /* P2P only */
+ BFA_PPORT_TOPOLOGY_LOOP = 2, /* LOOP topology */
+ BFA_PPORT_TOPOLOGY_AUTO = 3, /* auto topology selection */
+};
+
+/**
+ * Physical port loopback types.
+ */
+enum bfa_pport_opmode {
+ BFA_PPORT_OPMODE_NORMAL = 0x00, /* normal non-loopback mode */
+ BFA_PPORT_OPMODE_LB_INT = 0x01, /* internal loop back */
+ BFA_PPORT_OPMODE_LB_SLW = 0x02, /* serial link wrapback (serdes) */
+ BFA_PPORT_OPMODE_LB_EXT = 0x04, /* external loop back (serdes) */
+ BFA_PPORT_OPMODE_LB_CBL = 0x08, /* cabled loop back */
+ BFA_PPORT_OPMODE_LB_NLINT = 0x20, /* NL_Port internal loopback */
+};
+
+#define BFA_PPORT_OPMODE_LB_HARD(_mode) \
+ ((_mode == BFA_PPORT_OPMODE_LB_INT) || \
+ (_mode == BFA_PPORT_OPMODE_LB_SLW) || \
+ (_mode == BFA_PPORT_OPMODE_LB_EXT))
+
+/**
+ Port State (in sync with SNIA port state).
+ */
+enum bfa_pport_snia_state {
+ BFA_PPORT_STATE_UNKNOWN = 1, /* port is not initialized */
+ BFA_PPORT_STATE_ONLINE = 2, /* port is ONLINE */
+ BFA_PPORT_STATE_DISABLED = 3, /* port is disabled by user */
+ BFA_PPORT_STATE_BYPASSED = 4, /* port is bypassed (in LOOP) */
+ BFA_PPORT_STATE_DIAG = 5, /* port diagnostics is active */
+ BFA_PPORT_STATE_LINKDOWN = 6, /* link is down */
+ BFA_PPORT_STATE_LOOPBACK = 8, /* port is looped back */
+};
+
+/**
+ * Port link state
+ */
+enum bfa_pport_linkstate {
+ BFA_PPORT_LINKUP = 1, /* Physical port/Trunk link up */
+ BFA_PPORT_LINKDOWN = 2, /* Physical port/Trunk link down */
+ BFA_PPORT_TRUNK_LINKDOWN = 3, /* Trunk link down (new tmaster) */
+};
+
+/**
+ * Port link state event
+ */
+#define bfa_pport_event_t enum bfa_pport_linkstate
+
+/**
+ * Port link state reason code
+ */
+enum bfa_pport_linkstate_rsn {
+ BFA_PPORT_LINKSTATE_RSN_NONE = 0,
+ BFA_PPORT_LINKSTATE_RSN_DISABLED = 1,
+ BFA_PPORT_LINKSTATE_RSN_RX_NOS = 2,
+ BFA_PPORT_LINKSTATE_RSN_RX_OLS = 3,
+ BFA_PPORT_LINKSTATE_RSN_RX_LIP = 4,
+ BFA_PPORT_LINKSTATE_RSN_RX_LIPF7 = 5,
+ BFA_PPORT_LINKSTATE_RSN_SFP_REMOVED = 6,
+ BFA_PPORT_LINKSTATE_RSN_PORT_FAULT = 7,
+
+
+ /* CEE related reason codes/errors */
+ CEE_LLDP_INFO_AGED_OUT = 20,
+ CEE_LLDP_SHUTDOWN_TLV_RCVD = 21,
+ CEE_PEER_NOT_ADVERTISE_DCBX = 22,
+ CEE_PEER_NOT_ADVERTISE_PG = 23,
+ CEE_PEER_NOT_ADVERTISE_PFC = 24,
+ CEE_PEER_NOT_ADVERTISE_FCOE = 25,
+ CEE_PG_NOT_COMPATIBLE = 26,
+ CEE_PFC_NOT_COMPATIBLE = 27,
+ CEE_FCOE_NOT_COMPATIBLE = 28,
+ CEE_BAD_PG_RCVD = 29,
+ CEE_BAD_BW_RCVD = 30,
+ CEE_BAD_PFC_RCVD = 31,
+ CEE_BAD_FCOE_PRI_RCVD = 32,
+ CEE_DUP_CONTROL_TLV_RCVD = 33,
+ CEE_DUP_FEAT_TLV_RCVD = 34,
+ CEE_APPLY_NEW_CFG = 35, /* reason, not an error */
+ CEE_PROTOCOL_INIT = 36, /* reason, not an error */
+ CEE_PHY_LINK_DOWN = 37,
+};
+
+/**
+ * Default Target Rate Limiting Speed.
+ */
+#define BFA_PPORT_DEF_TRL_SPEED BFA_PPORT_SPEED_1GBPS
+
+/**
+ * Physical port configuration
+ */
+struct bfa_pport_cfg_s {
+ u8 topology; /* bfa_pport_topology */
+ u8 speed; /* enum bfa_pport_speed */
+ u8 trunked; /* trunked or not */
+ u8 qos_enabled; /* qos enabled or not */
+ u8 trunk_ports; /* bitmap of trunked ports */
+ u8 cfg_hardalpa; /* is hard alpa configured */
+ u16 maxfrsize; /* maximum frame size */
+ u8 hardalpa; /* configured hard alpa */
+ u8 rx_bbcredit; /* receive buffer credits */
+ u8 tx_bbcredit; /* transmit buffer credits */
+ u8 ratelimit; /* ratelimit enabled or not */
+ u8 trl_def_speed; /* ratelimit default speed */
+ u8 rsvd[3];
+ u16 path_tov; /* device path timeout */
+ u16 q_depth; /* SCSI Queue depth */
+};
+
+/**
+ * Port attribute values.
+ */
+struct bfa_pport_attr_s {
+ /*
+ * Static fields
+ */
+ wwn_t nwwn; /* node wwn */
+ wwn_t pwwn; /* port wwn */
+ fc_cos_t cos_supported; /* supported class of services */
+ u32 rsvd;
+ fc_symname_t port_symname; /* port symbolic name */
+ enum bfa_pport_speed speed_supported; /* supported speeds */
+ bfa_boolean_t pbind_enabled; /* Will be set if Persistent binding
+ * enabled. Relevant only in Windows
+ */
+
+ /*
+ * Configured values
+ */
+ struct bfa_pport_cfg_s pport_cfg; /* pport cfg */
+
+ /*
+ * Dynamic field - info from BFA
+ */
+ enum bfa_pport_states port_state; /* current port state */
+ enum bfa_pport_speed speed; /* current speed */
+ enum bfa_pport_topology topology; /* current topology */
+ bfa_boolean_t beacon; /* current beacon status */
+ bfa_boolean_t link_e2e_beacon;/* set if link beacon on */
+ bfa_boolean_t plog_enabled; /* set if portlog is enabled*/
+
+ /*
+ * Dynamic field - info from FCS
+ */
+ u32 pid; /* port ID */
+ enum bfa_pport_type port_type; /* current topology */
+ u32 loopback; /* external loopback */
+ u32 rsvd1;
+ u32 rsvd2; /* padding for 64 bit */
+};
+
+/**
+ * Port statistics.
+ */
+struct bfa_pport_stats_s {
+ u64 secs_since_reset;
+ /* seconds since stats is reset */
+ u64 tx_frames; /* transmitted frames */
+ u64 tx_words; /* transmitted words */
+ u64 rx_frames; /* received frames */
+ u64 rx_words; /* received words */
+ u64 lip_count; /* LIPs seen */
+ u64 nos_count; /* NOS count */
+ u64 error_frames; /* errored frames (sent?) */
+ u64 dropped_frames; /* dropped frames */
+ u64 link_failures; /* link failure count */
+ u64 loss_of_syncs; /* loss of sync count */
+ u64 loss_of_signals;/* loss of signal count */
+ u64 primseq_errs; /* primitive sequence protocol
+ * errors
+ */
+ u64 bad_os_count; /* invalid ordered set */
+ u64 err_enc_out; /* Encoding error outside frame */
+ u64 invalid_crcs; /* frames received with invalid CRC*/
+ u64 undersized_frm; /* undersized frames */
+ u64 oversized_frm; /* oversized frames */
+ u64 bad_eof_frm; /* frames with bad EOF */
+ struct bfa_qos_stats_s qos_stats; /* QoS statistics */
+};
+
+
+/**
+ * Port FC4 statistics.
+ */
+struct bfa_pport_fc4stats_s {
+ u64 input_requests;
+ u64 output_requests;
+ u64 control_requests;
+ u64 input_megabytes;
+ u64 output_megabytes;
+};
+
+/**
+ * Port FCP mappings.
+ */
+struct bfa_pport_fcpmap_s {
+ char osdevname[256];
+ u32 bus;
+ u32 target;
+ u32 oslun;
+ u32 fcid;
+ wwn_t nwwn;
+ wwn_t pwwn;
+ u64 fcplun;
+};
+
+/**
+ * Port RNID info.
+ */
+struct bfa_pport_rnid_s {
+ wwn_t wwn;
+ u32 unittype;
+ u32 portid;
+ u32 attached_nodes_num;
+ u16 ip_version;
+ u16 udp_port;
+ u8 ipaddr[16];
+ u16 rsvd;
+ u16 topologydiscoveryflags;
+};
+
+/**
+ * Link state information
+ */
+struct bfa_pport_link_s {
+ u8 linkstate; /* Link state bfa_pport_linkstate */
+ u8 linkstate_rsn; /* bfa_pport_linkstate_rsn_t */
+ u8 topology; /* P2P/LOOP bfa_pport_topology */
+ u8 speed; /* Link speed (1/2/4/8 G) */
+ u32 linkstate_opt; /* Linkstate optional data (debug) */
+ u8 trunked; /* Trunked or not (1 or 0) */
+ u8 resvd[3];
+ struct bfa_qos_attr_s qos_attr; /* QoS Attributes */
+ struct bfa_qos_vc_attr_s qos_vc_attr; /* VC info from ELP */
+ union {
+ struct {
+ u8 tmaster;/* Trunk Master or
+ * not (1 or 0) */
+ u8 tlinks; /* Trunk links bitmap
+ * (linkup) */
+ u8 resv1; /* Reserved */
+ } trunk_info;
+
+ struct {
+ u8 myalpa; /* alpa claimed */
+ u8 login_req; /* Login required or
+ * not (1 or 0) */
+ u8 alpabm_val;/* alpa bitmap valid
+ * or not (1 or 0) */
+ fc_alpabm_t alpabm; /* alpa bitmap */
+ } loop_info;
+ } tl;
+};
+
+struct bfa_phy_port_stats_s {
+ struct cna_stats_mac_rx mac_rx_stats;
+ struct cna_stats_bpc_rx bpc_rx_stats;
+ struct cna_stats_rad rad_stats;
+ struct cna_stats_mac_tx mac_tx_stats;
+ struct cna_stats_bpc_tx bpc_tx_stats;
+};
+
+#endif /* __BFA_DEFS_PPORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_qos.h patch/drivers/scsi/bfa/include/defs/bfa_defs_qos.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_qos.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_qos.h 2009-03-14 11:44:58.300681000 -0700
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_QOS_H__
+#define __BFA_DEFS_QOS_H__
+
+/**
+ * QoS states
+ */
+enum bfa_qos_state {
+ BFA_QOS_ONLINE = 1, /* QoS is online */
+ BFA_QOS_OFFLINE = 2, /* QoS is offline */
+};
+
+
+/**
+ * QoS Priority levels.
+ */
+enum bfa_qos_priority {
+ BFA_QOS_UNKNOWN = 0,
+ BFA_QOS_HIGH = 1, /* QoS Priority Level High */
+ BFA_QOS_MED = 2, /* QoS Priority Level Medium */
+ BFA_QOS_LOW = 3, /* QoS Priority Level Low */
+};
+
+
+/**
+ * QoS bandwidth allocation for each priority level
+ */
+enum bfa_qos_bw_alloc {
+ BFA_QOS_BW_HIGH = 60, /* bandwidth allocation for High */
+ BFA_QOS_BW_MED = 30, /* bandwidth allocation for Medium */
+ BFA_QOS_BW_LOW = 10, /* bandwidth allocation for Low */
+};
+
+/**
+ * QoS attribute returned in QoS Query
+ */
+struct bfa_qos_attr_s {
+ enum bfa_qos_state state; /* QoS current state */
+ u32 total_bb_cr; /* Total BB Credits */
+};
+
+/**
+ * These fields should be displayed only from the CLI.
+ * There will be a separate BFAL API (get_qos_vc_attr ?)
+ * to retrieve this.
+ *
+ */
+#define BFA_QOS_MAX_VC 16
+
+struct bfa_qos_vc_info_s {
+ u8 vc_credit;
+ u8 borrow_credit;
+ u8 priority;
+ u8 resvd;
+};
+
+struct bfa_qos_vc_attr_s {
+ u16 total_vc_count; /* Total VC Count */
+ u16 shared_credit;
+ u32 elp_opmode_flags;
+ struct bfa_qos_vc_info_s vc_info[BFA_QOS_MAX_VC]; /* as many as
+ * total_vc_count */
+};
+
+/**
+ * QoS statistics
+ */
+struct bfa_qos_stats_s {
+ u32 flogi_sent; /* QoS Flogi sent */
+ u32 flogi_acc_recvd; /* QoS Flogi Acc received */
+ u32 flogi_rjt_recvd; /* QoS Flogi rejects received */
+ u32 flogi_retries; /* QoS Flogi retries */
+
+ u32 elp_recvd; /* QoS ELP received */
+ u32 elp_accepted; /* QoS ELP Accepted */
+ u32 elp_rejected; /* QoS ELP rejected */
+ u32 elp_dropped; /* QoS ELP dropped */
+
+ u32 qos_rscn_recvd; /* QoS RSCN received */
+ u32 rsvd; /* padding for 64 bit alignment */
+};
+
+#endif /* __BFA_DEFS_QOS_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_rport.h patch/drivers/scsi/bfa/include/defs/bfa_defs_rport.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_rport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_rport.h 2009-03-14 11:44:58.186382000 -0700
@@ -0,0 +1,199 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_RPORT_H__
+#define __BFA_DEFS_RPORT_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+#include <defs/bfa_defs_pport.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_qos.h>
+
+/**
+ * FCS remote port states
+ */
+enum bfa_rport_state {
+ BFA_RPORT_UNINIT = 0, /* PORT is not yet initialized */
+ BFA_RPORT_OFFLINE = 1, /* rport is offline */
+ BFA_RPORT_PLOGI = 2, /* PLOGI to rport is in progress */
+ BFA_RPORT_ONLINE = 3, /* login to rport is complete */
+ BFA_RPORT_PLOGI_RETRY = 4, /* retrying login to rport */
+ BFA_RPORT_NSQUERY = 5, /* nameserver query */
+ BFA_RPORT_ADISC = 6, /* ADISC authentication */
+ BFA_RPORT_LOGO = 7, /* logging out with rport */
+ BFA_RPORT_LOGORCV = 8, /* handling LOGO from rport */
+ BFA_RPORT_NSDISC = 9, /* re-discover rport */
+};
+
+/**
+ * Rport Scsi Function : Initiator/Target.
+ */
+enum bfa_rport_function {
+ BFA_RPORT_INITIATOR = 0x01, /* SCSI Initiator */
+ BFA_RPORT_TARGET = 0x02, /* SCSI Target */
+};
+
+/**
+ * port/node symbolic names for rport
+ */
+#define BFA_RPORT_SYMNAME_MAXLEN 255
+struct bfa_rport_symname_s {
+ char symname[BFA_RPORT_SYMNAME_MAXLEN];
+};
+
+struct bfa_rport_hal_stats_s {
+ u32 sm_un_cr; /* uninit: create events */
+ u32 sm_un_unexp; /* uninit: exception events */
+ u32 sm_cr_on; /* created: online events */
+ u32 sm_cr_del; /* created: delete events */
+ u32 sm_cr_hwf; /* created: IOC down */
+ u32 sm_cr_unexp; /* created: exception events */
+ u32 sm_fwc_rsp; /* fw create: f/w responses */
+ u32 sm_fwc_del; /* fw create: delete events */
+ u32 sm_fwc_off; /* fw create: offline events */
+ u32 sm_fwc_hwf; /* fw create: IOC down */
+ u32 sm_fwc_unexp; /* fw create: exception events*/
+ u32 sm_on_off; /* online: offline events */
+ u32 sm_on_del; /* online: delete events */
+ u32 sm_on_hwf; /* online: IOC down events */
+ u32 sm_on_unexp; /* online: exception events */
+ u32 sm_fwd_rsp; /* fw delete: fw responses */
+ u32 sm_fwd_del; /* fw delete: delete events */
+ u32 sm_fwd_hwf; /* fw delete: IOC down events */
+ u32 sm_fwd_unexp; /* fw delete: exception events*/
+ u32 sm_off_del; /* offline: delete events */
+ u32 sm_off_on; /* offline: online events */
+ u32 sm_off_hwf; /* offline: IOC down events */
+ u32 sm_off_unexp; /* offline: exception events */
+ u32 sm_del_fwrsp; /* delete: fw responses */
+ u32 sm_del_hwf; /* delete: IOC down events */
+ u32 sm_del_unexp; /* delete: exception events */
+ u32 sm_delp_fwrsp; /* delete pend: fw responses */
+ u32 sm_delp_hwf; /* delete pend: IOC downs */
+ u32 sm_delp_unexp; /* delete pend: exceptions */
+ u32 sm_offp_fwrsp; /* off-pending: fw responses */
+ u32 sm_offp_del; /* off-pending: deletes */
+ u32 sm_offp_hwf; /* off-pending: IOC downs */
+ u32 sm_offp_unexp; /* off-pending: exceptions */
+ u32 sm_iocd_off; /* IOC down: offline events */
+ u32 sm_iocd_del; /* IOC down: delete events */
+ u32 sm_iocd_on; /* IOC down: online events */
+ u32 sm_iocd_unexp; /* IOC down: exceptions */
+ u32 rsvd;
+};
+
+/**
+ * FCS remote port statistics
+ */
+struct bfa_rport_stats_s {
+ u32 offlines; /* remote port offline count */
+ u32 onlines; /* remote port online count */
+ u32 rscns; /* RSCN affecting rport */
+ u32 plogis; /* plogis sent */
+ u32 plogi_accs; /* plogi accepts */
+ u32 plogi_timeouts; /* plogi timeouts */
+ u32 plogi_rejects; /* rcvd plogi rejects */
+ u32 plogi_failed; /* local failure */
+ u32 plogi_rcvd; /* plogis rcvd */
+ u32 prli_rcvd; /* inbound PRLIs */
+ u32 adisc_rcvd; /* ADISCs received */
+ u32 adisc_rejects; /* recvd ADISC rejects */
+ u32 adisc_sent; /* ADISC requests sent */
+ u32 adisc_accs; /* ADISC accepted by rport */
+ u32 adisc_failed; /* ADISC failed (no response) */
+ u32 adisc_rejected; /* ADISC rejected by us */
+ u32 logos; /* logos sent */
+ u32 logo_accs; /* LOGO accepts from rport */
+ u32 logo_failed; /* LOGO failures */
+ u32 logo_rejected; /* LOGO rejects from rport */
+ u32 logo_rcvd; /* LOGO from remote port */
+
+ u32 rpsc_rcvd; /* RPSC received */
+ u32 rpsc_rejects; /* recvd RPSC rejects */
+ u32 rpsc_sent; /* RPSC requests sent */
+ u32 rpsc_accs; /* RPSC accepted by rport */
+ u32 rpsc_failed; /* RPSC failed (no response) */
+ u32 rpsc_rejected; /* RPSC rejected by us */
+
+ u32 rsvd;
+ struct bfa_rport_hal_stats_s hal_stats; /* BFA rport stats */
+};
+
+/**
+ * Rport's QoS attributes
+ */
+struct bfa_rport_qos_attr_s {
+ enum bfa_qos_priority qos_priority; /* rport's QoS priority */
+ u32 qos_flow_id; /* QoS flow Id */
+};
+
+/**
+ * FCS remote port attributes returned in queries
+ */
+struct bfa_rport_attr_s {
+ wwn_t nwwn; /* node wwn */
+ wwn_t pwwn; /* port wwn */
+ fc_cos_t cos_supported; /* supported class of services */
+ u32 pid; /* port ID */
+ u32 df_sz; /* Max payload size */
+ enum bfa_rport_state state; /* Rport State machine state */
+ fc_cos_t fc_cos; /* FC classes of services */
+ bfa_boolean_t cisc; /* CISC capable device */
+ struct bfa_rport_symname_s symname; /* Symbolic Name */
+ enum bfa_rport_function scsi_function; /* Initiator/Target */
+ struct bfa_rport_qos_attr_s qos_attr; /* qos attributes */
+ enum bfa_pport_speed curr_speed; /* operating speed got from
+ * RPSC ELS. UNKNOWN, if RPSC
+ * is not supported */
+ bfa_boolean_t trl_enforced; /* TRL enforced ? TRUE/FALSE */
+ enum bfa_pport_speed assigned_speed; /* Speed assigned by the user.
+ * will be used if RPSC is not
+ * supported by the rport */
+};
+
+#define bfa_rport_aen_qos_data_t struct bfa_rport_qos_attr_s
+
+/**
+ * BFA remote port events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_RPORT_AEN_ONLINE: [in]: lpwwn [out]: vf_id, lpwwn, rpwwn
+ * BFA_RPORT_AEN_OFFLINE: [in]: lpwwn [out]: vf_id, lpwwn, rpwwn
+ * BFA_RPORT_AEN_DISCONNECT:[in]: lpwwn [out]: vf_id, lpwwn, rpwwn
+ * BFA_RPORT_AEN_QOS_PRIO: [in]: lpwwn [out]: vf_id, lpwwn, rpwwn, prio
+ * BFA_RPORT_AEN_QOS_FLOWID:[in]: lpwwn [out]: vf_id, lpwwn, rpwwn, flow_id
+ */
+enum bfa_rport_aen_event {
+ BFA_RPORT_AEN_ONLINE = 1, /* RPort online event */
+ BFA_RPORT_AEN_OFFLINE = 2, /* RPort offline event */
+ BFA_RPORT_AEN_DISCONNECT = 3, /* RPort disconnect event */
+ BFA_RPORT_AEN_QOS_PRIO = 4, /* QOS priority change event */
+ BFA_RPORT_AEN_QOS_FLOWID = 5, /* QOS flow Id change event */
+};
+
+struct bfa_rport_aen_data_s {
+ u16 vf_id; /* vf_id of this logical port */
+ u16 rsvd[3];
+ wwn_t ppwwn; /* WWN of its physical port */
+ wwn_t lpwwn; /* WWN of this logical port */
+ wwn_t rpwwn; /* WWN of this remote port */
+ union {
+ bfa_rport_aen_qos_data_t qos;
+ } priv;
+};
+
+#endif /* __BFA_DEFS_RPORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_status.h patch/drivers/scsi/bfa/include/defs/bfa_defs_status.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_status.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_status.h 2009-03-14 11:44:58.365290000 -0700
@@ -0,0 +1,153 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_STATUS_H__
+#define __BFA_DEFS_STATUS_H__
+
+/**
+ * API status return values
+ *
+ * NOTE: The error msgs are auto generated from the comments. Only singe line
+ * comments are supported
+ */
+enum bfa_status {
+ BFA_STATUS_OK = 0, /* Success */
+ BFA_STATUS_FAILED = 1, /* Operation failed */
+ BFA_STATUS_EINVAL = 2, /* Invalid params Check input parameters */
+ BFA_STATUS_ENOMEM = 3, /* Out of resources */
+ BFA_STATUS_ENOSYS = 4, /* Function not implemented */
+ BFA_STATUS_ETIMER = 5, /* Timer expired - Retry, if persists, contact support */
+ BFA_STATUS_EPROTOCOL = 6, /* Protocol error */
+ BFA_STATUS_ENOFCPORTS = 7, /* No FC ports resources */
+ BFA_STATUS_NOFLASH = 8, /* Flash not present */
+ BFA_STATUS_BADFLASH = 9, /* Flash is corrupted or bad */
+ BFA_STATUS_SFP_UNSUPP = 10, /* Unsupported SFP - Replace SFP */
+ BFA_STATUS_UNKNOWN_VFID = 11, /* VF_ID not found */
+ BFA_STATUS_DATACORRUPTED = 12, /* Diag returned data corrupted contact support */
+ BFA_STATUS_DEVBUSY = 13, /* Device busy - Retry operation */
+ BFA_STATUS_ABORTED = 14, /* Operation aborted */
+ BFA_STATUS_NODEV = 15, /* Dev is not present */
+ BFA_STATUS_HDMA_FAILED = 16, /* Host dma failed contact support */
+ BFA_STATUS_FLASH_BAD_LEN = 17, /* Flash bad length */
+ BFA_STATUS_UNKNOWN_LWWN = 18, /* LPORT PWWN not found */
+ BFA_STATUS_UNKNOWN_RWWN = 19, /* RPORT PWWN not found */
+ BFA_STATUS_FCPT_LS_RJT = 20, /* Got LS_RJT for FC Pass through Req */
+ BFA_STATUS_VPORT_EXISTS = 21, /* VPORT already exists */
+ BFA_STATUS_VPORT_MAX = 22, /* Reached max VPORT supported limit */
+ BFA_STATUS_UNSUPP_SPEED = 23, /* Invalid Speed Check speed setting */
+ BFA_STATUS_INVLD_DFSZ = 24, /* Invalid Max data field size */
+ BFA_STATUS_CNFG_FAILED = 25, /* Setting can not be persisted */
+ BFA_STATUS_CMD_NOTSUPP = 26, /* Command/API not supported */
+ BFA_STATUS_NO_ADAPTER = 27, /* No Brocade Adapter Found */
+ BFA_STATUS_LINKDOWN = 28, /* Link is down - Check or replace SFP/cable */
+ BFA_STATUS_FABRIC_RJT = 29, /* Reject from attached fabric */
+ BFA_STATUS_UNKNOWN_VWWN = 30, /* VPORT PWWN not found */
+ BFA_STATUS_NSLOGIN_FAILED = 31, /* Nameserver login failed */
+ BFA_STATUS_NO_RPORTS = 32, /* No remote ports found */
+ BFA_STATUS_NSQUERY_FAILED = 33, /* Nameserver query failed */
+ BFA_STATUS_PORT_OFFLINE = 34, /* Port is not online */
+ BFA_STATUS_RPORT_OFFLINE = 35, /* RPORT is not online */
+ BFA_STATUS_TGTOPEN_FAILED = 36, /* Remote SCSI target open failed */
+ BFA_STATUS_BAD_LUNS = 37, /* No valid LUNs found */
+ BFA_STATUS_IO_FAILURE = 38, /* SCSI target IO failure */
+ BFA_STATUS_NO_FABRIC = 39, /* No switched fabric present */
+ BFA_STATUS_EBADF = 40, /* Bad file descriptor */
+ BFA_STATUS_EINTR = 41, /* A signal was caught during ioctl */
+ BFA_STATUS_EIO = 42, /* I/O error */
+ BFA_STATUS_ENOTTY = 43, /* Inappropriate I/O control operation */
+ BFA_STATUS_ENXIO = 44, /* No such device or address */
+ BFA_STATUS_EFOPEN = 45, /* Failed to open file */
+ BFA_STATUS_VPORT_WWN_BP = 46, /* WWN is same as base port's WWN */
+ BFA_STATUS_PORT_NOT_DISABLED = 47, /* Port not disabled disable port first */
+ BFA_STATUS_BADFRMHDR = 48, /* Bad frame header */
+ BFA_STATUS_BADFRMSZ = 49, /* Bad frame size check and replace SFP/cable */
+ BFA_STATUS_MISSINGFRM = 50, /* Missing frame check and replace SFP/cable */
+ BFA_STATUS_LINKTIMEOUT = 51, /* Link timeout check and replace SFP/cable */
+ BFA_STATUS_NO_FCPIM_NEXUS = 52, /* No FCP Nexus exists with the rport */
+ BFA_STATUS_CHECKSUM_FAIL = 53, /* checksum failure */
+ BFA_STATUS_GZME_FAILED = 54, /* Get zone member query failed */
+ BFA_STATUS_SCSISTART_REQD = 55, /* SCSI disk require START command */
+ BFA_STATUS_IOC_FAILURE = 56, /* IOC failure - Retry, if persists contact support */
+ BFA_STATUS_INVALID_WWN = 57, /* Invalid WWN */
+ BFA_STATUS_MISMATCH = 58, /* Version mismatch */
+ BFA_STATUS_IOC_ENABLED = 59, /* IOC is already enabled */
+ BFA_STATUS_ADAPTER_ENABLED = 60, /* Adapter is not disabled disable adapter first */
+ BFA_STATUS_IOC_NON_OP = 61, /* IOC is not operational. Enable IOC and if it still fails, contact support */
+ BFA_STATUS_ADDR_MAP_FAILURE = 62, /* PCI base address not mapped in OS */
+ BFA_STATUS_SAME_NAME = 63, /* Name exists! use a different name */
+ BFA_STATUS_PENDING = 64, /* API completes asynchronously */
+ BFA_STATUS_8G_SPD = 65, /* Speed setting not valid for 8G HBA */
+ BFA_STATUS_4G_SPD = 66, /* Speed setting not valid for 4G HBA */
+ BFA_STATUS_AD_IS_ENABLE = 67, /* Adapter is already enabled */
+ BFA_STATUS_EINVAL_TOV = 68, /* Invalid path failover TOV */
+ BFA_STATUS_EINVAL_QDEPTH = 69, /* Invalid queue depth value */
+ BFA_STATUS_VERSION_FAIL = 70, /* Application/Driver version mismatch */
+ BFA_STATUS_DIAG_BUSY = 71, /* diag busy */
+ BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */
+ BFA_STATUS_BEACON_OFF = 73, /* Port Beacon already off */
+ BFA_STATUS_LBEACON_ON = 74, /* Link End-to-End Beacon already on */
+ BFA_STATUS_LBEACON_OFF = 75, /* Link End-to-End Beacon already off */
+ BFA_STATUS_PORT_NOT_INITED = 76, /* Port not initialized */
+ BFA_STATUS_RPSC_ENABLED = 77, /* Target has a valid speed */
+ BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */
+ BFA_STATUS_BAD_FILE = 79, /* Not a valid Brocade Boot Code file */
+ BFA_STATUS_RLIM_EN = 80, /* Target rate limiting is already enabled */
+ BFA_STATUS_RLIM_DIS = 81, /* Target rate limiting is already disabled */
+ BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */
+ BFA_STATUS_ADAPTER_DISABLED = 83, /* Adapter is already disabled */
+ BFA_STATUS_BIOS_DISABLED = 84, /* Bios is already disabled */
+ BFA_STATUS_AUTH_ENABLED = 85, /* Authentication is already enabled */
+ BFA_STATUS_AUTH_DISABLED = 86, /* Authentication is already disabled */
+ BFA_STATUS_ERROR_TRL_ENABLED = 87, /* Target rate limiting is enabled */
+ BFA_STATUS_ERROR_QOS_ENABLED = 88, /* QoS is enabled */
+ BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */
+ BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact support */
+ BFA_STATUS_INVALID_DEVID = 91, /* Invalid device id provided */
+ BFA_STATUS_QOS_ENABLED = 92, /* QOS is already enabled */
+ BFA_STATUS_QOS_DISABLED = 93, /* QOS is already disabled */
+ BFA_STATUS_INCORRECT_DRV_CONFIG = 94, /* Check configuration key/value pair */
+ BFA_STATUS_REG_FAIL = 95, /* Can't read windows registry */
+ BFA_STATUS_IM_INV_CODE = 96, /* Invalid IOCTL code */
+ BFA_STATUS_IM_INV_VLAN = 97, /* Invalid VLAN ID */
+ BFA_STATUS_IM_INV_ADAPT_NAME = 98, /* Invalid adapter name */
+ BFA_STATUS_IM_LOW_RESOURCES = 99, /* Memory allocation failure in driver */
+ BFA_STATUS_IM_VLANID_IS_PVID = 100, /* Given VLAN id same as PVID */
+ BFA_STATUS_IM_VLANID_EXISTS = 101, /* Given VLAN id already exists */
+ BFA_STATUS_IM_FW_UPDATE_FAIL = 102, /* Updating firmware with new VLAN ID failed */
+ BFA_STATUS_PORTLOG_ENABLED = 103, /* Port Log is already enabled */
+ BFA_STATUS_PORTLOG_DISABLED = 104, /* Port Log is already disabled */
+ BFA_STATUS_FILE_NOT_FOUND = 105, /* Specified file could not be found */
+ BFA_STATUS_QOS_FC_ONLY = 106, /* QOS can be enabled for FC mode only */
+ BFA_STATUS_RLIM_FC_ONLY = 107, /* RATELIM can be enabled for FC mode only */
+ BFA_STATUS_CT_SPD = 108, /* Invalid speed selection for Catapult. */
+ BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */
+ BFA_STATUS_CEE_NOT_DN = 110, /* eth port is not at down state, please bring down first */
+ BFA_STATUS_10G_SPD = 111, /* Speed setting not valid for 10G HBA */
+ BFA_STATUS_IM_INV_TEAM_NAME = 112, /* Invalid team name */
+ BFA_STATUS_IM_DUP_TEAM_NAME = 113, /* Given team name already exists*/
+ BFA_STATUS_IM_ADAPT_ALREADY_IN_TEAM = 114, /* Given adapter is part of another team*/
+ BFA_STATUS_IM_ADAPT_HAS_VLANS = 115, /* Adapter has VLANs configured. Delete all VLANs before creating team*/
+ BFA_STATUS_IM_PVID_MISMATCH = 116, /* Mismatching PVIDs configured for adapters*/
+ BFA_STATUS_IM_LINK_SPEED_MISMATCH = 117, /* Mismatching link speeds configured for adapters*/
+ BFA_STATUS_IM_MTU_MISMATCH = 118, /* Mismatching MTUs configured for adapters*/
+ BFA_STATUS_IM_RSS_MISMATCH = 119, /* Mismatching RSS parameters configured for adapters*/
+ BFA_STATUS_IM_HDS_MISMATCH = 120, /* Mismatching HDS parameters configured for adapters*/
+ BFA_STATUS_IM_OFFLOAD_MISMATCH = 121, /* Mismatching offload parameters configured for adapters*/
+ BFA_STATUS_MAX_VAL /* Unknown error code */
+};
+#define bfa_status_t enum bfa_status
+
+#endif /* __BFA_DEFS_STATUS_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h patch/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h 2009-03-14 11:44:58.213199000 -0700
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_TSENSOR_H__
+#define __BFA_DEFS_TSENSOR_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_types.h>
+
+/**
+ * Temperature sensor status values
+ */
+enum bfa_tsensor_status {
+ BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unkown status */
+ BFA_TSENSOR_STATUS_FAULTY = 2, /* sensor is faulty */
+ BFA_TSENSOR_STATUS_BELOW_MIN = 3, /* temperature below mininum */
+ BFA_TSENSOR_STATUS_NOMINAL = 4, /* normal temperature */
+ BFA_TSENSOR_STATUS_ABOVE_MAX = 5, /* temperature above maximum */
+};
+
+/**
+ * Temperature sensor attribute
+ */
+struct bfa_tsensor_attr_s {
+ enum bfa_tsensor_status status; /* temperature sensor status */
+ u32 value; /* current temperature in celsius */
+};
+
+#endif /* __BFA_DEFS_TSENSOR_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_types.h patch/drivers/scsi/bfa/include/defs/bfa_defs_types.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_types.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_types.h 2009-03-14 11:44:58.372009000 -0700
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_TYPES_H__
+#define __BFA_DEFS_TYPES_H__
+
+#include <bfa_os_inc.h>
+
+enum bfa_boolean {
+ BFA_FALSE = 0,
+ BFA_TRUE = 1
+};
+#define bfa_boolean_t enum bfa_boolean
+
+#define BFA_STRING_32 32
+
+#endif /* __BFA_DEFS_TYPES_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_version.h patch/drivers/scsi/bfa/include/defs/bfa_defs_version.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_version.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_version.h 2009-03-14 11:44:58.293533000 -0700
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_VERSION_H__
+#define __BFA_DEFS_VERSION_H__
+
+#define BFA_VERSION_LEN 64
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_vf.h patch/drivers/scsi/bfa/include/defs/bfa_defs_vf.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_vf.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_vf.h 2009-03-14 11:44:58.193253000 -0700
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_VF_H__
+#define __BFA_DEFS_VF_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_port.h>
+#include <protocol/types.h>
+
+/**
+ * VF states
+ */
+enum bfa_vf_state {
+ BFA_VF_UNINIT = 0, /* fabric is not yet initialized */
+ BFA_VF_LINK_DOWN = 1, /* link is down */
+ BFA_VF_FLOGI = 2, /* flogi is in progress */
+ BFA_VF_AUTH = 3, /* authentication in progress */
+ BFA_VF_NOFABRIC = 4, /* fabric is not present */
+ BFA_VF_ONLINE = 5, /* login to fabric is complete */
+ BFA_VF_EVFP = 6, /* EVFP is in progress */
+ BFA_VF_ISOLATED = 7, /* port isolated due to vf_id mismatch */
+};
+
+/**
+ * VF statistics
+ */
+struct bfa_vf_stats_s {
+ u32 flogi_sent; /* Num FLOGIs sent */
+ u32 flogi_rsp_err; /* FLOGI response errors */
+ u32 flogi_acc_err; /* FLOGI accept errors */
+ u32 flogi_accepts; /* FLOGI accepts received */
+ u32 flogi_rejects; /* FLOGI rejects received */
+ u32 flogi_unknown_rsp; /* Unknown responses for FLOGI */
+ u32 flogi_alloc_wait; /* Allocation waits prior to
+ * sending FLOGI
+ */
+ u32 flogi_rcvd; /* FLOGIs received */
+ u32 flogi_rejected; /* Incoming FLOGIs rejected */
+ u32 fabric_onlines; /* Internal fabric online
+ * notification sent to other
+ * modules
+ */
+ u32 fabric_offlines; /* Internal fabric offline
+ * notification sent to other
+ * modules
+ */
+ u32 resvd;
+};
+
+/**
+ * VF attributes returned in queries
+ */
+struct bfa_vf_attr_s {
+ enum bfa_vf_state state; /* VF state */
+ u32 rsvd;
+ wwn_t fabric_name; /* fabric name */
+};
+
+#endif /* __BFA_DEFS_VF_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_vport.h patch/drivers/scsi/bfa/include/defs/bfa_defs_vport.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_vport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_vport.h 2009-03-14 11:44:58.199836000 -0700
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_VPORT_H__
+#define __BFA_DEFS_VPORT_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_port.h>
+#include <protocol/types.h>
+
+/**
+ * VPORT states
+ */
+enum bfa_vport_state {
+ BFA_FCS_VPORT_UNINIT = 0,
+ BFA_FCS_VPORT_CREATED = 1,
+ BFA_FCS_VPORT_OFFLINE = 1,
+ BFA_FCS_VPORT_FDISC_SEND = 2,
+ BFA_FCS_VPORT_FDISC = 3,
+ BFA_FCS_VPORT_FDISC_RETRY = 4,
+ BFA_FCS_VPORT_ONLINE = 5,
+ BFA_FCS_VPORT_DELETING = 6,
+ BFA_FCS_VPORT_CLEANUP = 6,
+ BFA_FCS_VPORT_LOGO_SEND = 7,
+ BFA_FCS_VPORT_LOGO = 8,
+ BFA_FCS_VPORT_ERROR = 9,
+ BFA_FCS_VPORT_MAX_STATE,
+};
+
+/**
+ * vport statistics
+ */
+struct bfa_vport_stats_s {
+ struct bfa_port_stats_s port_stats; /* base class (port) stats */
+ /*
+ * TODO - remove
+ */
+
+ u32 fdisc_sent; /* num fdisc sent */
+ u32 fdisc_accepts; /* fdisc accepts */
+ u32 fdisc_retries; /* fdisc retries */
+ u32 fdisc_timeouts; /* fdisc timeouts */
+ u32 fdisc_rsp_err; /* fdisc response error */
+ u32 fdisc_acc_bad; /* bad fdisc accepts */
+ u32 fdisc_rejects; /* fdisc rejects */
+ u32 fdisc_unknown_rsp;
+ /*
+ *!< fdisc rsp unknown error
+ */
+ u32 fdisc_alloc_wait;/* fdisc req (fcxp)alloc wait */
+
+ u32 logo_alloc_wait;/* logo req (fcxp) alloc wait */
+ u32 logo_sent; /* logo sent */
+ u32 logo_accepts; /* logo accepts */
+ u32 logo_rejects; /* logo rejects */
+ u32 logo_rsp_err; /* logo rsp errors */
+ u32 logo_unknown_rsp;
+ /* logo rsp unknown errors */
+
+ u32 fab_no_npiv; /* fabric does not support npiv */
+
+ u32 fab_offline; /* offline events from fab SM */
+ u32 fab_online; /* online events from fab SM */
+ u32 fab_cleanup; /* cleanup request from fab SM */
+ u32 rsvd;
+};
+
+/**
+ * BFA vport attribute returned in queries
+ */
+struct bfa_vport_attr_s {
+ struct bfa_port_attr_s port_attr; /* base class (port) attributes */
+ enum bfa_vport_state vport_state; /* vport state */
+ u32 rsvd;
+};
+
+#endif /* __BFA_DEFS_VPORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/log/bfa_log_fcs.h patch/drivers/scsi/bfa/include/log/bfa_log_fcs.h
--- orig/drivers/scsi/bfa/include/log/bfa_log_fcs.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/log/bfa_log_fcs.h 2009-03-14 11:44:58.517041000 -0700
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * messages define for FCS Module
+ */
+#ifndef __BFA_LOG_FCS_H__
+#define __BFA_LOG_FCS_H__
+#include <cs/bfa_log.h>
+#define BFA_LOG_FCS_FABRIC_NOSWITCH \
+ (((u32) BFA_LOG_FCS_ID << BFA_LOG_MODID_OFFSET) | 1)
+#define BFA_LOG_FCS_FABRIC_ISOLATED \
+ (((u32) BFA_LOG_FCS_ID << BFA_LOG_MODID_OFFSET) | 2)
+#endif
diff -urpN orig/drivers/scsi/bfa/include/log/bfa_log_hal.h patch/drivers/scsi/bfa/include/log/bfa_log_hal.h
--- orig/drivers/scsi/bfa/include/log/bfa_log_hal.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/log/bfa_log_hal.h 2009-03-14 11:44:58.525108000 -0700
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for HAL Module */
+#ifndef __BFA_LOG_HAL_H__
+#define __BFA_LOG_HAL_H__
+#include <cs/bfa_log.h>
+#define BFA_LOG_HAL_ASSERT \
+ (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 1)
+#define BFA_LOG_HAL_HEARTBEAT_FAILURE \
+ (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 2)
+#define BFA_LOG_HAL_FCPIM_PARM_INVALID \
+ (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 3)
+#endif
diff -urpN orig/drivers/scsi/bfa/include/log/bfa_log_linux.h patch/drivers/scsi/bfa/include/log/bfa_log_linux.h
--- orig/drivers/scsi/bfa/include/log/bfa_log_linux.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/log/bfa_log_linux.h 2009-03-14 11:44:58.531672000 -0700
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for LINUX Module */
+#ifndef __BFA_LOG_LINUX_H__
+#define __BFA_LOG_LINUX_H__
+#include <cs/bfa_log.h>
+#define BFA_LOG_LINUX_DEVICE_CLAIMED \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 1)
+#define BFA_LOG_LINUX_HASH_INIT_FAILED \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 2)
+#define BFA_LOG_LINUX_SYSFS_FAILED \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 3)
+#define BFA_LOG_LINUX_MEM_ALLOC_FAILED \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 4)
+#define BFA_LOG_LINUX_DRIVER_REGISTRATION_FAILED \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 5)
+#define BFA_LOG_LINUX_ITNIM_FREE \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 6)
+#define BFA_LOG_LINUX_ITNIM_ONLINE \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 7)
+#define BFA_LOG_LINUX_ITNIM_OFFLINE \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 8)
+#define BFA_LOG_LINUX_SCSI_HOST_FREE \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 9)
+#define BFA_LOG_LINUX_SCSI_ABORT \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 10)
+#define BFA_LOG_LINUX_SCSI_ABORT_COMP \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 11)
+#endif
diff -urpN orig/drivers/scsi/bfa/include/log/bfa_log_wdrv.h patch/drivers/scsi/bfa/include/log/bfa_log_wdrv.h
--- orig/drivers/scsi/bfa/include/log/bfa_log_wdrv.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/log/bfa_log_wdrv.h 2009-03-14 11:44:58.538673000 -0700
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * messages define for WDRV Module
+ */
+#ifndef __BFA_LOG_WDRV_H__
+#define __BFA_LOG_WDRV_H__
+#include <cs/bfa_log.h>
+#define BFA_LOG_WDRV_IOC_INIT_ERROR \
+ (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 1)
+#define BFA_LOG_WDRV_IOC_INTERNAL_ERROR \
+ (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 2)
+#define BFA_LOG_WDRV_IOC_START_ERROR \
+ (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 3)
+#define BFA_LOG_WDRV_IOC_STOP_ERROR \
+ (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 4)
+#define BFA_LOG_WDRV_INSUFFICIENT_RESOURCES \
+ (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 5)
+#define BFA_LOG_WDRV_BASE_ADDRESS_MAP_ERROR \
+ (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 6)
+#endif
diff -urpN orig/drivers/scsi/bfa/include/protocol/fc.h patch/drivers/scsi/bfa/include/protocol/fc.h
--- orig/drivers/scsi/bfa/include/protocol/fc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/protocol/fc.h 2009-03-14 11:44:58.085263000 -0700
@@ -0,0 +1,1098 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FC_H__
+#define __FC_H__
+
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+/*
+ * Fibre Channel Header Structure (FCHS) definition
+ */
+typedef struct fchs_s {
+#ifdef __BIGENDIAN
+ u32 routing:4; /* routing bits */
+ u32 cat_info:4; /* category info */
+#else
+ u32 cat_info:4; /* category info */
+ u32 routing:4; /* routing bits */
+#endif
+ u32 d_id:24; /* destination identifier */
+
+ u32 cs_ctl:8; /* class specific control */
+ u32 s_id:24; /* source identifier */
+
+ u32 type:8; /* data structure type */
+ u32 f_ctl:24; /* initial frame control */
+
+ u8 seq_id; /* sequence identifier */
+ u8 df_ctl; /* data field control */
+ u16 seq_cnt; /* sequence count */
+
+ u16 ox_id; /* originator exchange ID */
+ u16 rx_id; /* responder exchange ID */
+
+ u32 ro; /* relative offset */
+} fchs_t;
+
+/*
+ * Fibre Channel BB_E Header Structure
+ */
+typedef struct fcbbehs_s {
+ u16 ver_rsvd;
+ u32 rsvd[2];
+ u32 rsvd__sof;
+} fcbbehs_t;
+
+#define FC_SEQ_ID_MAX 256
+
+/*
+ * routing bit definitions
+ */
+enum {
+ FC_RTG_FC4_DEV_DATA = 0x0, /* FC-4 Device Data */
+ FC_RTG_EXT_LINK = 0x2, /* Extended Link Data */
+ FC_RTG_FC4_LINK_DATA = 0x3, /* FC-4 Link Data */
+ FC_RTG_VIDEO_DATA = 0x4, /* Video Data */
+ FC_RTG_EXT_HDR = 0x5, /* VFT, IFR or Encapsuled */
+ FC_RTG_BASIC_LINK = 0x8, /* Basic Link data */
+ FC_RTG_LINK_CTRL = 0xC, /* Link Control */
+};
+
+/*
+ * information category for extended link data and FC-4 Link Data
+ */
+enum {
+ FC_CAT_LD_REQUEST = 0x2, /* Request */
+ FC_CAT_LD_REPLY = 0x3, /* Reply */
+ FC_CAT_LD_DIAG = 0xF, /* for DIAG use only */
+};
+
+/*
+ * information category for extended headers (VFT, IFR or encapsulation)
+ */
+enum {
+ FC_CAT_VFT_HDR = 0x0, /* Virtual fabric tagging header */
+ FC_CAT_IFR_HDR = 0x1, /* Inter-Fabric routing header */
+ FC_CAT_ENC_HDR = 0x2, /* Encapsulation header */
+};
+
+/*
+ * information category for FC-4 device data
+ */
+enum {
+ FC_CAT_UNCATEG_INFO = 0x0, /* Uncategorized information */
+ FC_CAT_SOLICIT_DATA = 0x1, /* Solicited Data */
+ FC_CAT_UNSOLICIT_CTRL = 0x2, /* Unsolicited Control */
+ FC_CAT_SOLICIT_CTRL = 0x3, /* Solicited Control */
+ FC_CAT_UNSOLICIT_DATA = 0x4, /* Unsolicited Data */
+ FC_CAT_DATA_DESC = 0x5, /* Data Descriptor */
+ FC_CAT_UNSOLICIT_CMD = 0x6, /* Unsolicited Command */
+ FC_CAT_CMD_STATUS = 0x7, /* Command Status */
+};
+
+/*
+ * information category for Link Control
+ */
+enum {
+ FC_CAT_ACK_1 = 0x00,
+ FC_CAT_ACK_0_N = 0x01,
+ FC_CAT_P_RJT = 0x02,
+ FC_CAT_F_RJT = 0x03,
+ FC_CAT_P_BSY = 0x04,
+ FC_CAT_F_BSY_DATA = 0x05,
+ FC_CAT_F_BSY_LINK_CTL = 0x06,
+ FC_CAT_F_LCR = 0x07,
+ FC_CAT_NTY = 0x08,
+ FC_CAT_END = 0x09,
+};
+
+/*
+ * Type Field Definitions. FC-PH Section 18.5 pg. 165
+ */
+enum {
+ FC_TYPE_BLS = 0x0, /* Basic Link Service */
+ FC_TYPE_ELS = 0x1, /* Extended Link Service */
+ FC_TYPE_IP = 0x5, /* IP */
+ FC_TYPE_FCP = 0x8, /* SCSI-FCP */
+ FC_TYPE_GPP = 0x9, /* SCSI_GPP */
+ FC_TYPE_SERVICES = 0x20, /* Fibre Channel Services */
+ FC_TYPE_FC_FSS = 0x22, /* Fabric Switch Services */
+ FC_TYPE_FC_AL = 0x23, /* FC-AL */
+ FC_TYPE_FC_SNMP = 0x24, /* FC-SNMP */
+ FC_TYPE_MAX = 256, /* 256 FC-4 types */
+};
+
+typedef struct {
+ u8 bits[FC_TYPE_MAX / 8];
+} fc_fc4types_t;
+
+/*
+ * Frame Control Definitions. FC-PH Table-45. pg. 168
+ */
+enum {
+ FCTL_EC_ORIG = 0x000000, /* exchange originator */
+ FCTL_EC_RESP = 0x800000, /* exchange responder */
+ FCTL_SEQ_INI = 0x000000, /* sequence initiator */
+ FCTL_SEQ_REC = 0x400000, /* sequence recipient */
+ FCTL_FS_EXCH = 0x200000, /* first sequence of xchg */
+ FCTL_LS_EXCH = 0x100000, /* last sequence of xchg */
+ FCTL_END_SEQ = 0x080000, /* last frame of sequence */
+ FCTL_SI_XFER = 0x010000, /* seq initiative transfer */
+ FCTL_RO_PRESENT = 0x000008, /* relative offset present */
+ FCTL_FILLBYTE_MASK = 0x000003 /* , fill byte mask */
+};
+
+/*
+ * Fabric Well Known Addresses
+ */
+enum {
+ FC_MIN_WELL_KNOWN_ADDR = 0xFFFFF0,
+ FC_DOMAIN_CONTROLLER_MASK = 0xFFFC00,
+ FC_ALIAS_SERVER = 0xFFFFF8,
+ FC_MGMT_SERVER = 0xFFFFFA,
+ FC_TIME_SERVER = 0xFFFFFB,
+ FC_NAME_SERVER = 0xFFFFFC,
+ FC_FABRIC_CONTROLLER = 0xFFFFFD,
+ FC_FABRIC_PORT = 0xFFFFFE,
+ FC_BROADCAST_SERVER = 0xFFFFFF
+};
+
+/*
+ * domain/area/port defines
+ */
+#define FC_DOMAIN_MASK 0xFF0000
+#define FC_DOMAIN_SHIFT 16
+#define FC_AREA_MASK 0x00FF00
+#define FC_AREA_SHIFT 8
+#define FC_PORT_MASK 0x0000FF
+#define FC_PORT_SHIFT 0
+
+#define FC_GET_DOMAIN(p) (((p) & FC_DOMAIN_MASK) >> FC_DOMAIN_SHIFT)
+#define FC_GET_AREA(p) (((p) & FC_AREA_MASK) >> FC_AREA_SHIFT)
+#define FC_GET_PORT(p) (((p) & FC_PORT_MASK) >> FC_PORT_SHIFT)
+
+#define FC_DOMAIN_CTRLR(p) (FC_DOMAIN_CONTROLLER_MASK | (FC_GET_DOMAIN(p)))
+
+enum {
+ FC_RXID_ANY = 0xFFFFU,
+};
+
+/*
+ * generic ELS command
+ */
+typedef struct {
+u32 els_code:8; /* ELS Command Code */
+u32 reserved:24;
+} fc_els_cmd_t;
+
+/*
+ * ELS Command Codes. FC-PH Table-75. pg. 223
+ */
+enum {
+ FC_ELS_LS_RJT = 0x1, /* Link Service Reject. */
+ FC_ELS_ACC = 0x02, /* Accept */
+ FC_ELS_PLOGI = 0x03, /* N_Port Login. */
+ FC_ELS_FLOGI = 0x04, /* F_Port Login. */
+ FC_ELS_LOGO = 0x05, /* Logout. */
+ FC_ELS_ABTX = 0x06, /* Abort Exchange */
+ FC_ELS_RES = 0x08, /* Read Exchange status */
+ FC_ELS_RSS = 0x09, /* Read sequence status block */
+ FC_ELS_RSI = 0x0A, /* Request Sequence Initiative */
+ FC_ELS_ESTC = 0x0C, /* Estimate Credit. */
+ FC_ELS_RTV = 0x0E, /* Read Timeout Value. */
+ FC_ELS_RLS = 0x0F, /* Read Link Status. */
+ FC_ELS_ECHO = 0x10, /* Echo */
+ FC_ELS_TEST = 0x11, /* Test */
+ FC_ELS_RRQ = 0x12, /* Reinstate Recovery Qualifier. */
+ FC_ELS_REC = 0x13, /* Add this for TAPE support in FCR */
+ FC_ELS_PRLI = 0x20, /* Process Login */
+ FC_ELS_PRLO = 0x21, /* Process Logout. */
+ FC_ELS_SCN = 0x22, /* State Change Notification. */
+ FC_ELS_TPRLO = 0x24, /* Third Party Process Logout. */
+ FC_ELS_PDISC = 0x50, /* Discover N_Port Parameters. */
+ FC_ELS_FDISC = 0x51, /* Discover F_Port Parameters. */
+ FC_ELS_ADISC = 0x52, /* Discover Address. */
+ FC_ELS_FAN = 0x60, /* Fabric Address Notification */
+ FC_ELS_RSCN = 0x61, /* Reg State Change Notification */
+ FC_ELS_SCR = 0x62, /* State Change Registration. */
+ FC_ELS_RTIN = 0x77, /* Mangement server request */
+ FC_ELS_RNID = 0x78, /* Mangement server request */
+ FC_ELS_RLIR = 0x79, /* Registered Link Incident Record */
+
+ FC_ELS_RPSC = 0x7D, /* Report Port Speed Capabilities */
+ FC_ELS_QSA = 0x7E, /* Query Security Attributes. Ref FC-SP */
+ FC_ELS_E2E_LBEACON = 0x81,
+ /* End-to-End Link Beacon */
+ FC_ELS_AUTH = 0x90, /* Authentication. Ref FC-SP */
+ FC_ELS_RFCN = 0x97, /* Request Fabric Change Notification. Ref
+ *FC-SP */
+
+};
+
+/*
+ * Version numbers for FC-PH standards,
+ * used in login to indicate what port
+ * supports. See FC-PH-X table 158.
+ */
+enum {
+ FC_PH_VER_4_3 = 0x09,
+ FC_PH_VER_PH_3 = 0x20,
+};
+
+/*
+ * PDU size defines
+ */
+enum {
+ FC_MIN_PDUSZ = 512,
+ FC_MAX_PDUSZ = 2112,
+};
+
+/*
+ * N_Port PLOGI Common Service Parameters.
+ * FC-PH-x. Figure-76. pg. 308.
+ */
+typedef struct {
+ u8 verhi; /* FC-PH high version */
+ u8 verlo; /* FC-PH low version */
+ u16 bbcred; /* BB_Credit */
+
+#ifdef __BIGENDIAN
+ u8 ciro:1, /* continuously increasing RO */
+ rro:1, /* random relative offset */
+ npiv_supp:1, /* NPIV supported */
+ port_type:1, /* N_Port/F_port */
+ altbbcred:1, /* alternate BB_Credit */
+ resolution:1, /* ms/ns ED_TOV resolution */
+ vvl_info:1, /* VVL Info included */
+ reserved1:1;
+
+ u8 hg_supp:1,
+ query_dbc:1,
+ security:1,
+ sync_cap:1,
+ r_t_tov:1,
+ dh_dup_supp:1,
+ cisc:1, /* continuously increasing seq count */
+ payload:1;
+#else
+ u8 reserved2:2,
+ resolution:1, /* ms/ns ED_TOV resolution */
+ altbbcred:1, /* alternate BB_Credit */
+ port_type:1, /* N_Port/F_port */
+ npiv_supp:1, /* NPIV supported */
+ rro:1, /* random relative offset */
+ ciro:1; /* continuously increasing RO */
+
+ u8 payload:1,
+ cisc:1, /* continuously increasing seq count */
+ dh_dup_supp:1,
+ r_t_tov:1,
+ sync_cap:1,
+ security:1,
+ query_dbc:1,
+ hg_supp:1;
+#endif
+
+ u16 rxsz; /* recieve data_field size */
+
+ u16 conseq;
+ u16 ro_bitmap;
+
+ u32 e_d_tov;
+} fc_plogi_csp_t;
+
+/*
+ * N_Port PLOGI Class Specific Parameters.
+ * FC-PH-x. Figure 78. pg. 318.
+ */
+typedef struct {
+#ifdef __BIGENDIAN
+ u32 class_valid:1;
+ u32 intermix:1; /* class intermix supported if set =1.
+ * valid only for class1. Reserved for
+ * class2 & class3
+ */
+ u32 reserved1:2;
+ u32 sequential:1;
+ u32 reserved2:3;
+#else
+ u32 reserved2:3;
+ u32 sequential:1;
+ u32 reserved1:2;
+ u32 intermix:1; /* class intermix supported if set =1.
+ * valid only for class1. Reserved for
+ * class2 & class3
+ */
+ u32 class_valid:1;
+#endif
+
+ u32 reserved3:24;
+
+ u32 reserved4:16;
+ u32 rxsz:16; /* Receive data_field size */
+
+ u32 reserved5:8;
+ u32 conseq:8;
+ u32 e2e_credit:16; /* end to end credit */
+
+ u32 reserved7:8;
+ u32 ospx:8;
+ u32 reserved8:16;
+} fc_plogi_clp_t;
+
+#define FLOGI_VVL_BRCD 0x42524344 /*ASCII value for each character in string "BRCD" */
+
+/*
+ * PLOGI els command and reply payload
+ */
+typedef struct {
+ fc_els_cmd_t els_cmd; /* ELS command code */
+ fc_plogi_csp_t csp; /* common service params */
+ wwn_t port_name;
+ wwn_t node_name;
+ fc_plogi_clp_t class1; /* class 1 service parameters */
+ fc_plogi_clp_t class2; /* class 2 service parameters */
+ fc_plogi_clp_t class3; /* class 3 service parameters */
+ fc_plogi_clp_t class4; /* class 4 service parameters */
+ u8 vvl[16]; /* vendor version level */
+} fc_plogi_t, fc_flogi_t;
+
+/*
+ * LOGO els command payload
+ */
+typedef struct {
+ fc_els_cmd_t els_cmd; /* ELS command code */
+ u32 res1:8;
+ u32 nport_id:24; /* N_Port identifier of source */
+ wwn_t orig_port_name; /* Port name of the LOGO originator */
+} fc_logo_t;
+
+/*
+ * ADISC els command payload
+ */
+typedef struct {
+ fc_els_cmd_t els_cmd; /* ELS command code */
+ u32 res1:8;
+ u32 orig_HA:24; /* originator hard address */
+ wwn_t orig_port_name; /* originator port name */
+ wwn_t orig_node_name; /* originator node name */
+ u32 res2:8;
+ u32 nport_id:24; /* originator NPortID */
+} fc_adisc_t;
+
+/*
+ * Exchange status block
+ */
+typedef struct {
+ u32 oxid:16;
+ u32 rxid:16;
+ u32 res1:8;
+ u32 orig_np:24; /* originator NPortID */
+ u32 res2:8;
+ u32 resp_np:24; /* responder NPortID */
+ u32 es_bits;
+ u32 res3;
+ /*
+ * un modified section of the fields
+ */
+} fc_exch_status_blk_t;
+
+/*
+ * RES els command payload
+ */
+typedef struct {
+ fc_els_cmd_t els_cmd; /* ELS command code */
+ u32 res1:8;
+ u32 nport_id:24; /* N_Port identifier of source */
+ u32 oxid:16;
+ u32 rxid:16;
+ u8 assoc_hdr[32];
+} fc_res_t;
+
+/*
+ * RES els accept payload
+ */
+typedef struct {
+ fc_els_cmd_t els_cmd; /* ELS command code */
+ fc_exch_status_blk_t fc_exch_blk; /* Exchange status block */
+} fc_res_acc_t;
+
+/*
+ * REC els command payload
+ */
+typedef struct _fc_rec_t {
+ fc_els_cmd_t els_cmd; /* ELS command code */
+ u32 res1:8;
+ u32 nport_id:24; /* N_Port identifier of source */
+ u32 oxid:16;
+ u32 rxid:16;
+} fc_rec_t;
+
+#define FC_REC_ESB_OWN_RSP 0x80000000 /* responder owns */
+#define FC_REC_ESB_SI 0x40000000 /* SI is owned */
+#define FC_REC_ESB_COMP 0x20000000 /* exchange is complete */
+#define FC_REC_ESB_ENDCOND_ABN 0x10000000 /* abnormal ending */
+#define FC_REC_ESB_RQACT 0x04000000 /* recovery qual active */
+#define FC_REC_ESB_ERRP_MSK 0x03000000
+#define FC_REC_ESB_OXID_INV 0x00800000 /* invalid OXID */
+#define FC_REC_ESB_RXID_INV 0x00400000 /* invalid RXID */
+#define FC_REC_ESB_PRIO_INUSE 0x00200000
+
+/*
+ * REC els accept payload
+ */
+typedef struct _fc_rec_acc_t {
+ fc_els_cmd_t els_cmd; /* ELS command code */
+ u32 oxid:16;
+ u32 rxid:16;
+ u32 res1:8;
+ u32 orig_id:24; /* N_Port id of exchange originator */
+ u32 res2:8;
+ u32 resp_id:24; /* N_Port id of exchange responder */
+ u32 count; /* data transfer count */
+ u32 e_stat; /* exchange status */
+} fc_rec_acc_t;
+
+/*
+ * RSI els payload
+ */
+typedef struct _fc_rsi_t {
+ fc_els_cmd_t els_cmd;
+ u32 res1:8;
+ u32 orig_sid:24;
+ u32 oxid:16;
+ u32 rxid:16;
+} fc_rsi_t;
+
+/*
+ * structure for PRLI paramater pages, both request & response
+ * see FC-PH-X table 113 & 115 for explanation also FCP table 8
+ */
+typedef struct {
+ u32 reserved: 16;
+#ifdef __BIGENDIAN
+ u32 reserved1: 5;
+ u32 rec_support : 1;
+ u32 task_retry_id : 1;
+ u32 retry : 1;
+
+ u32 confirm : 1;
+ u32 doverlay:1;
+ u32 initiator:1;
+ u32 target:1;
+ u32 cdmix:1;
+ u32 drmix:1;
+ u32 rxrdisab:1;
+ u32 wxrdisab:1;
+#else
+ u32 retry : 1;
+ u32 task_retry_id : 1;
+ u32 rec_support : 1;
+ u32 reserved1: 5;
+
+ u32 wxrdisab:1;
+ u32 rxrdisab:1;
+ u32 drmix:1;
+ u32 cdmix:1;
+ u32 target:1;
+ u32 initiator:1;
+ u32 doverlay:1;
+ u32 confirm : 1;
+#endif
+} fc_prli_params_t;
+
+/*
+ * valid values for rspcode in PRLI ACC payload
+ */
+enum {
+ FC_PRLI_ACC_XQTD = 0x1, /* request executed */
+ FC_PRLI_ACC_PREDEF_IMG = 0x5, /* predefined image - no prli needed */
+};
+
+typedef struct {
+ u32 type:8;
+ u32 codext:8;
+#ifdef __BIGENDIAN
+ u32 origprocasv:1;
+ u32 rsppav:1;
+ u32 imagepair:1;
+ u32 reserved1:1;
+ u32 rspcode:4;
+#else
+ u32 rspcode:4;
+ u32 reserved1:1;
+ u32 imagepair:1;
+ u32 rsppav:1;
+ u32 origprocasv:1;
+#endif
+ u32 reserved2:8;
+
+ u32 origprocas;
+ u32 rspprocas;
+ fc_prli_params_t servparams;
+} fc_prli_params_page_t;
+
+/*
+ * PRLI request and accept payload, FC-PH-X tables 112 & 114
+ */
+typedef struct {
+ u32 command:8;
+ u32 pglen:8;
+ u32 pagebytes:16;
+ fc_prli_params_page_t parampage;
+} fc_prli_t;
+
+/*
+ * PRLO logout params page
+ */
+typedef struct {
+ u32 type:8;
+ u32 type_ext:8;
+#ifdef __BIGENDIAN
+ u32 opa_valid:1; /* originator process associator
+ * valid
+ */
+ u32 rpa_valid:1; /* responder process associator valid */
+ u32 res1:14;
+#else
+ u32 res1:14;
+ u32 rpa_valid:1; /* responder process associator valid */
+ u32 opa_valid:1; /* originator process associator
+ * valid
+ */
+#endif
+ u32 orig_process_assc;
+ u32 resp_process_assc;
+
+ u32 res2;
+} fc_prlo_params_page_t;
+
+/*
+ * PRLO els command payload
+ */
+typedef struct {
+ u32 command:8;
+ u32 page_len:8;
+ u32 payload_len:16;
+ fc_prlo_params_page_t prlo_params[1];
+} fc_prlo_t;
+
+/*
+ * PRLO Logout response parameter page
+ */
+typedef struct {
+ u32 type:8;
+ u32 type_ext:8;
+
+#ifdef __BIGENDIAN
+ u32 opa_valid:1; /* originator process associator
+ * valid
+ */
+ u32 rpa_valid:1; /* responder process associator valid */
+ u32 res1:14;
+#else
+ u32 res1:14;
+ u32 rpa_valid:1; /* responder process associator valid */
+ u32 opa_valid:1; /* originator process associator
+ * valid
+ */
+#endif
+ u32 orig_process_assc;
+ u32 resp_process_assc;
+
+ u32 fc4type_csp;
+} fc_prlo_acc_params_page_t;
+
+/*
+ * PRLO els command ACC payload
+ */
+typedef struct {
+ u32 command:8;
+ u32 page_len:8;
+ u32 payload_len:16;
+ fc_prlo_acc_params_page_t prlo_acc_params[1];
+} fc_prlo_acc_t;
+
+/*
+ * SCR els command payload
+ */
+enum {
+ FC_SCR_REG_FUNC_FABRIC_DETECTED = 0x01,
+ FC_SCR_REG_FUNC_N_PORT_DETECTED = 0x02,
+ FC_SCR_REG_FUNC_FULL = 0x03,
+ FC_SCR_REG_FUNC_CLEAR_REG = 0xFF,
+};
+
+typedef struct {
+ u32 command:8;
+ u32 res:24;
+ u32 res1:24;
+ u32 reg_func:8;
+} fc_scr_t;
+
+/*
+ * Information category for Basic link data
+ */
+enum {
+ FC_CAT_NOP = 0x0,
+ FC_CAT_ABTS = 0x1,
+ FC_CAT_RMC = 0x2,
+ FC_CAT_BA_ACC = 0x4,
+ FC_CAT_BA_RJT = 0x5,
+ FC_CAT_PRMT = 0x6,
+};
+
+/*
+ * LS_RJT els reply payload
+ */
+typedef struct {
+ fc_els_cmd_t els_cmd; /* ELS command code */
+ u32 res1:8;
+ u32 reason_code:8; /* Reason code for reject */
+ u32 reason_code_expl:8; /* Reason code explanation */
+ u32 vendor_unique:8; /* Vendor specific */
+} fc_ls_rjt_t;
+
+/*
+ * LS_RJT reason codes
+ */
+enum {
+ FC_LS_RJT_RSN_INV_CMD_CODE = 0x01,
+ FC_LS_RJT_RSN_LOGICAL_ERROR = 0x03,
+ FC_LS_RJT_RSN_LOGICAL_BUSY = 0x05,
+ FC_LS_RJT_RSN_PROTOCOL_ERROR = 0x07,
+ FC_LS_RJT_RSN_UNABLE_TO_PERF_CMD = 0x09,
+ FC_LS_RJT_RSN_CMD_NOT_SUPP = 0x0B,
+};
+
+/*
+ * LS_RJT reason code explanation
+ */
+enum {
+ FC_LS_RJT_EXP_NO_ADDL_INFO = 0x00,
+ FC_LS_RJT_EXP_SPARMS_ERR_OPTIONS = 0x01,
+ FC_LS_RJT_EXP_SPARMS_ERR_INI_CTL = 0x03,
+ FC_LS_RJT_EXP_SPARMS_ERR_REC_CTL = 0x05,
+ FC_LS_RJT_EXP_SPARMS_ERR_RXSZ = 0x07,
+ FC_LS_RJT_EXP_SPARMS_ERR_CONSEQ = 0x09,
+ FC_LS_RJT_EXP_SPARMS_ERR_CREDIT = 0x0B,
+ FC_LS_RJT_EXP_INV_PORT_NAME = 0x0D,
+ FC_LS_RJT_EXP_INV_NODE_FABRIC_NAME = 0x0E,
+ FC_LS_RJT_EXP_INV_CSP = 0x0F,
+ FC_LS_RJT_EXP_INV_ASSOC_HDR = 0x11,
+ FC_LS_RJT_EXP_ASSOC_HDR_REQD = 0x13,
+ FC_LS_RJT_EXP_INV_ORIG_S_ID = 0x15,
+ FC_LS_RJT_EXP_INV_OXID_RXID_COMB = 0x17,
+ FC_LS_RJT_EXP_CMD_ALREADY_IN_PROG = 0x19,
+ FC_LS_RJT_EXP_LOGIN_REQUIRED = 0x1E,
+ FC_LS_RJT_EXP_INVALID_NPORT_ID = 0x1F,
+ FC_LS_RJT_EXP_INSUFF_RES = 0x29,
+ FC_LS_RJT_EXP_CMD_NOT_SUPP = 0x2C,
+ FC_LS_RJT_EXP_INV_PAYLOAD_LEN = 0x2D,
+};
+
+/*
+ * RRQ els command payload
+ */
+typedef struct {
+ fc_els_cmd_t els_cmd; /* ELS command code */
+ u32 res1:8;
+ u32 s_id:24; /* exchange originator S_ID */
+
+ u32 ox_id:16; /* originator exchange ID */
+ u32 rx_id:16; /* responder exchange ID */
+
+ u32 res2[8]; /* optional association header */
+} fc_rrq_t;
+
+/*
+ * ABTS BA_ACC reply payload
+ */
+typedef struct {
+ u32 seq_id_valid:8; /* set to 0x00 for Abort Exchange */
+ u32 seq_id:8; /* invalid for Abort Exchange */
+ u32 res2:16;
+ u32 ox_id:16; /* OX_ID from ABTS frame */
+ u32 rx_id:16; /* RX_ID from ABTS frame */
+ u32 low_seq_cnt:16; /* set to 0x0000 for Abort Exchange */
+ u32 high_seq_cnt:16;/* set to 0xFFFF for Abort Exchange */
+} fc_ba_acc_t;
+
+/*
+ * ABTS BA_RJT reject payload
+ */
+typedef struct {
+ u32 res1:8; /* Reserved */
+ u32 reason_code:8; /* reason code for reject */
+ u32 reason_expl:8; /* reason code explanation */
+ u32 vendor_unique:8;/* vendor unique reason code,set to 0 */
+} fc_ba_rjt_t;
+
+/*
+ * TPRLO logout parameter page
+ */
+typedef struct {
+u32 type:8;
+u32 type_ext:8;
+
+#ifdef __BIGENDIAN
+ u32 opa_valid:1;
+ u32 rpa_valid:1;
+ u32 tpo_nport_valid:1;
+ u32 global_process_logout:1;
+ u32 res1:12;
+#else
+ u32 res1:12;
+ u32 global_process_logout:1;
+ u32 tpo_nport_valid:1;
+ u32 rpa_valid:1;
+ u32 opa_valid:1;
+#endif
+
+ u32 orig_process_assc;
+ u32 resp_process_assc;
+
+ u32 res2:8;
+ u32 tpo_nport_id;
+} fc_tprlo_params_page_t;
+
+/*
+ * TPRLO ELS command payload
+ */
+typedef struct {
+ u32 command:8;
+ u32 page_len:8;
+ u32 payload_len:16;
+
+ fc_tprlo_params_page_t tprlo_params[1];
+} fc_tprlo_t;
+
+typedef enum {
+ FC_GLOBAL_LOGO = 1,
+ FC_TPR_LOGO
+} fc_tprlo_type_t;
+
+/*
+ * TPRLO els command ACC payload
+ */
+typedef struct {
+ u32 command:8;
+ u32 page_len:8;
+ u32 payload_len:16;
+ fc_prlo_acc_params_page_t tprlo_acc_params[1];
+} fc_tprlo_acc_t;
+
+/*
+ * RSCN els command req payload
+ */
+#define FC_RSCN_PGLEN 0x4
+
+typedef enum {
+ FC_RSCN_FORMAT_PORTID = 0x0,
+ FC_RSCN_FORMAT_AREA = 0x1,
+ FC_RSCN_FORMAT_DOMAIN = 0x2,
+ FC_RSCN_FORMAT_FABRIC = 0x3,
+} fc_rscn_format_t;
+
+typedef struct {
+ u32 format:2;
+ u32 qualifier:4;
+ u32 resvd:2;
+ u32 portid:24;
+} fc_rscn_event_t;
+
+typedef struct {
+ u8 command;
+ u8 pagelen;
+ u16 payldlen;
+ fc_rscn_event_t event[1];
+} fc_rscn_pl_t;
+
+/*
+ * ECHO els command req payload
+ */
+typedef struct _fc_echo_t {
+ fc_els_cmd_t els_cmd;
+} fc_echo_t;
+
+/*
+ * RNID els command
+ */
+
+#define RNID_NODEID_DATA_FORMAT_COMMON 0x00
+#define RNID_NODEID_DATA_FORMAT_FCP3 0x08
+#define RNID_NODEID_DATA_FORMAT_DISCOVERY 0xDF
+
+#define RNID_ASSOCIATED_TYPE_UNKNOWN 0x00000001
+#define RNID_ASSOCIATED_TYPE_OTHER 0x00000002
+#define RNID_ASSOCIATED_TYPE_HUB 0x00000003
+#define RNID_ASSOCIATED_TYPE_SWITCH 0x00000004
+#define RNID_ASSOCIATED_TYPE_GATEWAY 0x00000005
+#define RNID_ASSOCIATED_TYPE_STORAGE_DEVICE 0x00000009
+#define RNID_ASSOCIATED_TYPE_HOST 0x0000000A
+#define RNID_ASSOCIATED_TYPE_STORAGE_SUBSYSTEM 0x0000000B
+#define RNID_ASSOCIATED_TYPE_STORAGE_ACCESS_DEVICE 0x0000000E
+#define RNID_ASSOCIATED_TYPE_NAS_SERVER 0x00000011
+#define RNID_ASSOCIATED_TYPE_BRIDGE 0x00000002
+#define RNID_ASSOCIATED_TYPE_VIRTUALIZATION_DEVICE 0x00000003
+#define RNID_ASSOCIATED_TYPE_MULTI_FUNCTION_DEVICE 0x000000FF
+
+/*
+ * RNID els command payload
+ */
+typedef struct {
+ fc_els_cmd_t els_cmd;
+ u32 node_id_data_format:8;
+ u32 reserved:24;
+} fc_rnid_cmd_t;
+
+/*
+ * RNID els response payload
+ */
+
+typedef struct {
+ wwn_t port_name;
+ wwn_t node_name;
+} fc_rnid_common_id_data_t;
+
+typedef struct {
+ u32 vendor_unique[4];
+ u32 asso_type;
+ u32 phy_port_num;
+ u32 num_attached_nodes;
+ u32 node_mgmt:8;
+ u32 ip_version:8;
+ u32 udp_tcp_port_num:16;
+ u32 ip_address[4];
+ u32 reserved:16;
+ u32 vendor_specific:16;
+} fc_rnid_general_topology_data_t;
+
+typedef struct {
+ fc_els_cmd_t els_cmd;
+ u32 node_id_data_format:8;
+ u32 common_id_data_length:8;
+ u32 reserved:8;
+ u32 specific_id_data_length:8;
+ fc_rnid_common_id_data_t common_id_data;
+ fc_rnid_general_topology_data_t gen_topology_data;
+} fc_rnid_acc_t;
+
+#define RNID_ASSOCIATED_TYPE_UNKNOWN 0x00000001
+#define RNID_ASSOCIATED_TYPE_OTHER 0x00000002
+#define RNID_ASSOCIATED_TYPE_HUB 0x00000003
+#define RNID_ASSOCIATED_TYPE_SWITCH 0x00000004
+#define RNID_ASSOCIATED_TYPE_GATEWAY 0x00000005
+#define RNID_ASSOCIATED_TYPE_STORAGE_DEVICE 0x00000009
+#define RNID_ASSOCIATED_TYPE_HOST 0x0000000A
+#define RNID_ASSOCIATED_TYPE_STORAGE_SUBSYSTEM 0x0000000B
+#define RNID_ASSOCIATED_TYPE_STORAGE_ACCESS_DEVICE 0x0000000E
+#define RNID_ASSOCIATED_TYPE_NAS_SERVER 0x00000011
+#define RNID_ASSOCIATED_TYPE_BRIDGE 0x00000002
+#define RNID_ASSOCIATED_TYPE_VIRTUALIZATION_DEVICE 0x00000003
+#define RNID_ASSOCIATED_TYPE_MULTI_FUNCTION_DEVICE 0x000000FF
+
+typedef enum {
+ RPSC_SPEED_CAP_1G = 0x8000,
+ RPSC_SPEED_CAP_2G = 0x4000,
+ RPSC_SPEED_CAP_4G = 0x2000,
+ RPSC_SPEED_CAP_10G = 0x1000,
+ RPSC_SPEED_CAP_8G = 0x0800,
+ RPSC_SPEED_CAP_16G = 0x0400,
+
+ RPSC_SPEED_CAP_UNKNOWN = 0x0001,
+} fc_rpsc_speed_cap_t;
+
+typedef enum {
+ RPSC_OP_SPEED_1G = 0x8000,
+ RPSC_OP_SPEED_2G = 0x4000,
+ RPSC_OP_SPEED_4G = 0x2000,
+ RPSC_OP_SPEED_10G = 0x1000,
+ RPSC_OP_SPEED_8G = 0x0800,
+ RPSC_OP_SPEED_16G = 0x0400,
+
+ RPSC_OP_SPEED_NOT_EST = 0x0001, /*! speed not established */
+} fc_rpsc_op_speed_t;
+
+typedef struct {
+ u16 port_speed_cap; /*! see fc_rpsc_speed_cap_t */
+ u16 port_op_speed; /*! see fc_rpsc_op_speed_t */
+} fc_rpsc_speed_info_t;
+
+typedef enum {
+ LINK_E2E_BEACON_ON = 1,
+ LINK_E2E_BEACON_OFF = 2
+} link_e2e_beacon_subcmd_t;
+
+typedef enum {
+ BEACON_TYPE_NORMAL = 1, /*! Normal Beaconing. Green */
+ BEACON_TYPE_WARN = 2, /*! Warning Beaconing. Yellow/Amber */
+ BEACON_TYPE_CRITICAL = 3 /*! Critical Beaconing. Red */
+} beacon_type_t;
+
+typedef struct els_link_e2e_beacon_param {
+ u8 beacon_type; /* Beacon Type. See beacon_type_t */
+ u8 beacon_frequency;
+ /* Beacon frequency. Number of blinks
+ * per 10 seconds
+ */
+ u16 beacon_duration;/* Beacon duration (in Seconds). The
+ * command operation should be
+ * terminated at the end of this
+ * timeout value.
+ *
+ * Ignored if diag_sub_cmd is
+ * LINK_E2E_BEACON_OFF.
+ *
+ * If 0, beaconing will continue till a
+ * BEACON OFF request is received
+ */
+} link_e2e_beacon_param_t;
+
+/*
+ * Link E2E beacon request/good response format. For LS_RJTs use fc_ls_rjt_t
+ */
+typedef struct {
+ u32 ls_code; /*! FC_ELS_E2E_LBEACON in requests *
+ *or FC_ELS_ACC in good replies */
+ u32 ls_sub_cmd; /*! See link_e2e_beacon_subcmd_t */
+ link_e2e_beacon_param_t beacon_parm;
+} link_e2e_beacon_req_t;
+
+/**
+ * If RPSC request is sent to the Domain Controller, the request is for
+ * all the ports within that domain (TODO - I don't think FOS implements
+ * this...).
+ */
+typedef struct {
+ fc_els_cmd_t els_cmd;
+} fc_rpsc_cmd_t;
+
+/*
+ * RPSC Acc
+ */
+typedef struct {
+ u32 command:8;
+ u32 rsvd:8;
+ u32 num_entries:16;
+
+ fc_rpsc_speed_info_t speed_info[1];
+} fc_rpsc_acc_t;
+
+/**
+ * If RPSC2 request is sent to the Domain Controller,
+ */
+#define FC_BRCD_TOKEN 0x42524344
+
+typedef struct {
+ fc_els_cmd_t els_cmd;
+ u32 token;
+ u16 resvd;
+ u16 num_pids; /* Number of pids in the request */
+ struct {
+ u32 rsvd1:8;
+ u32 pid:24; /* port identifier */
+ } pid_list[1];
+} fc_rpsc2_cmd_t;
+
+typedef enum {
+ RPSC2_PORT_TYPE_UNKNOWN = 0,
+ RPSC2_PORT_TYPE_NPORT = 1,
+ RPSC2_PORT_TYPE_NLPORT = 2,
+ RPSC2_PORT_TYPE_NPIV_PORT = 0x5f,
+ RPSC2_PORT_TYPE_NPORT_TRUNK = 0x6f,
+} fc_rpsc2_port_type_t;
+/*
+ * RPSC2 portInfo entry structure
+ */
+typedef struct {
+ u32 pid; /* PID */
+ u16 resvd1;
+ u16 index; /* port number / index */
+ u8 resvd2;
+ u8 type; /* port type N/NL/... */
+ u16 speed; /* port Operating Speed */
+} fc_rpsc2_port_info_t;
+
+/*
+ * RPSC2 Accept payload
+ */
+typedef struct {
+ u8 els_cmd;
+ u8 resvd;
+ u16 num_pids; /* Number of pids in the request */
+ fc_rpsc2_port_info_t port_info[1]; /* port information */
+}fc_rpsc2_acc_t;
+
+/**
+ * bit fields so that multiple classes can be specified
+ */
+typedef enum {
+ FC_CLASS_2 = 0x04,
+ FC_CLASS_3 = 0x08,
+ FC_CLASS_2_3 = 0x0C,
+} fc_cos_t;
+
+/*
+ * symbolic name
+ */
+typedef struct {
+ u8 symname[FC_SYMNAME_MAX];
+} fc_symname_t;
+
+typedef struct {
+ u8 alpa_bm[FC_ALPA_MAX / 8];
+} fc_alpabm_t;
+
+/*
+ * protocol default timeout values
+ */
+#define FC_ED_TOV 2
+#define FC_REC_TOV (FC_ED_TOV + 1)
+#define FC_RA_TOV 10
+#define FC_ELS_TOV (2 * FC_RA_TOV)
+
+/*
+ * virtual fabric related defines
+ */
+#define FC_VF_ID_NULL 0 /* must not be used as VF_ID */
+#define FC_VF_ID_MIN 1
+#define FC_VF_ID_MAX 0xEFF
+#define FC_VF_ID_CTL 0xFEF /* control VF_ID */
+
+/**
+ * Virtual Fabric Tagging header format
+ * @caution This is defined only in BIG ENDIAN format.
+ */
+typedef struct {
+ u32 r_ctl:8;
+ u32 ver:2;
+ u32 type:4;
+ u32 res_a:2;
+ u32 priority:3;
+ u32 vf_id:12;
+ u32 res_b:1;
+ u32 hopct:8;
+ u32 res_c:24;
+} fc_vft_t;
+
+#pragma pack()
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/protocol/fcp.h patch/drivers/scsi/bfa/include/protocol/fcp.h
--- orig/drivers/scsi/bfa/include/protocol/fcp.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/protocol/fcp.h 2009-03-14 11:44:58.092381000 -0700
@@ -0,0 +1,186 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FCPPROTO_H__
+#define __FCPPROTO_H__
+
+#include <protocol/scsi.h>
+
+#pragma pack(1)
+
+enum {
+ FCP_RJT = 0x01000000, /* SRR reject */
+ FCP_SRR_ACCEPT = 0x02000000, /* SRR accept */
+ FCP_SRR = 0x14000000, /* Sequence Retransmission Request */
+};
+
+/*
+ * SRR FC-4 LS payload
+ */
+typedef struct {
+ u32 ls_cmd;
+ u32 ox_id:16; /* ox-id */
+ u32 rx_id:16; /* rx-id */
+ u32 ro; /* relative offset */
+ u32 r_ctl:8; /* R_CTL for I.U. */
+ u32 res:24;
+} fc_srr_t;
+
+
+/*
+ * FCP_CMND definitions
+ */
+#define FCP_CMND_CDB_LEN 16
+#define FCP_CMND_LUN_LEN 8
+
+typedef struct {
+ lun_t lun; /* 64-bit LU number */
+ u8 crn; /* command reference number */
+#ifdef __BIGENDIAN
+ u8 resvd:1,
+ priority:4, /* FCP-3: SAM-3 priority */
+ taskattr:3; /* scsi task attribute */
+#else
+ u8 taskattr:3, /* scsi task attribute */
+ priority:4, /* FCP-3: SAM-3 priority */
+ resvd:1;
+#endif
+ u8 tm_flags; /* task management flags */
+#ifdef __BIGENDIAN
+ u8 addl_cdb_len:6, /* additional CDB length words */
+ iodir:2; /* read/write FCP_DATA IUs */
+#else
+ u8 iodir:2, /* read/write FCP_DATA IUs */
+ addl_cdb_len:6; /* additional CDB length */
+#endif
+ scsi_cdb_t cdb;
+
+ /*
+ * !!! additional cdb bytes follows here!!!
+ */
+ u32 fcp_dl; /* bytes to be transferred */
+} fcp_cmnd_t;
+
+#define fcp_cmnd_cdb_len(_cmnd) ((_cmnd)->addl_cdb_len * 4 + FCP_CMND_CDB_LEN)
+#define fcp_cmnd_fcpdl(_cmnd) ((&(_cmnd)->fcp_dl)[(_cmnd)->addl_cdb_len])
+
+/*
+ * fcp_cmnd_t.iodir field values
+ */
+typedef enum {
+ FCP_IODIR_NONE = 0,
+ FCP_IODIR_WRITE = 1,
+ FCP_IODIR_READ = 2,
+ FCP_IODIR_RW = 3,
+} fcp_iodir_t;
+
+/*
+ * Task attribute field
+ */
+enum {
+ FCP_TASK_ATTR_SIMPLE = 0,
+ FCP_TASK_ATTR_HOQ = 1,
+ FCP_TASK_ATTR_ORDERED = 2,
+ FCP_TASK_ATTR_ACA = 4,
+ FCP_TASK_ATTR_UNTAGGED = 5, /* obsolete in FCP-3 */
+};
+
+/*
+ * Task management flags field - only one bit shall be set
+ */
+#ifndef BIT
+#define BIT(_x) (1 << (_x))
+#endif
+typedef enum {
+ FCP_TM_ABORT_TASK_SET = BIT(1),
+ FCP_TM_CLEAR_TASK_SET = BIT(2),
+ FCP_TM_LUN_RESET = BIT(4),
+ FCP_TM_TARGET_RESET = BIT(5), /* obsolete in FCP-3 */
+ FCP_TM_CLEAR_ACA = BIT(6),
+} fcp_tm_cmnd_t;
+
+/*
+ * FCP_XFER_RDY IU defines
+ */
+typedef struct {
+ u32 data_ro;
+ u32 burst_len;
+ u32 reserved;
+} fcp_xfer_rdy_t;
+
+/*
+ * FCP_RSP residue flags
+ */
+typedef enum {
+ FCP_NO_RESIDUE = 0, /* no residue */
+ FCP_RESID_OVER = 1, /* more data left that was not sent */
+ FCP_RESID_UNDER = 2, /* less data than requested */
+} fcp_residue_t;
+
+enum {
+ FCP_RSPINFO_GOOD = 0,
+ FCP_RSPINFO_DATALEN_MISMATCH = 1,
+ FCP_RSPINFO_CMND_INVALID = 2,
+ FCP_RSPINFO_ROLEN_MISMATCH = 3,
+ FCP_RSPINFO_TM_NOT_SUPP = 4,
+ FCP_RSPINFO_TM_FAILED = 5,
+};
+
+typedef struct {
+ u32 res0:24;
+ u32 rsp_code:8; /* response code (as above) */
+ u32 res1;
+} fcp_rspinfo_t;
+
+typedef struct {
+ u32 reserved[2]; /* 2 words reserved */
+ u16 reserved2;
+#ifdef __BIGENDIAN
+ u8 reserved3:3;
+ u8 fcp_conf_req:1; /* FCP_CONF is requested */
+ u8 resid_flags:2; /* underflow/overflow */
+ u8 sns_len_valid:1;/* sense len is valid */
+ u8 rsp_len_valid:1;/* response len is valid */
+#else
+ u8 rsp_len_valid:1;/* response len is valid */
+ u8 sns_len_valid:1;/* sense len is valid */
+ u8 resid_flags:2; /* underflow/overflow */
+ u8 fcp_conf_req:1; /* FCP_CONF is requested */
+ u8 reserved3:3;
+#endif
+ u8 scsi_status; /* one byte SCSI status */
+ u32 residue; /* residual data bytes */
+ u32 sns_len; /* length od sense info */
+ u32 rsp_len; /* length of response info */
+} fcp_resp_t;
+
+#define fcp_snslen(__fcprsp) ((__fcprsp)->sns_len_valid ? \
+ (__fcprsp)->sns_len : 0)
+#define fcp_rsplen(__fcprsp) ((__fcprsp)->rsp_len_valid ? \
+ (__fcprsp)->rsp_len : 0)
+#define fcp_rspinfo(__fcprsp) ((fcp_rspinfo_t *)((__fcprsp) + 1))
+#define fcp_snsinfo(__fcprsp) (((u8 *)fcp_rspinfo(__fcprsp)) + \
+ fcp_rsplen(__fcprsp))
+
+typedef struct {
+ fchs_t fchs;
+ fcp_cmnd_t fcp;
+} fcp_cmnd_fr_t;
+
+#pragma pack()
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/protocol/fc_sp.h patch/drivers/scsi/bfa/include/protocol/fc_sp.h
--- orig/drivers/scsi/bfa/include/protocol/fc_sp.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/protocol/fc_sp.h 2009-03-14 11:44:58.115472000 -0700
@@ -0,0 +1,225 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FC_SP_H__
+#define __FC_SP_H__
+
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+typedef enum {
+ FC_AUTH_ELS_MORE_FRAGS_FLAG = 0x80, /*! bit-7. More Fragments
+ * Follow
+ */
+ FC_AUTH_ELS_CONCAT_FLAG = 0x40, /*! bit-6. Concatenation Flag */
+ FC_AUTH_ELS_SEQ_NUM_FLAG = 0x01 /*! bit-0. Sequence Number */
+} auth_els_flags_t;
+
+typedef enum {
+ FC_AUTH_MC_AUTH_RJT = 0x0A, /*! Auth Reject */
+ FC_AUTH_MC_AUTH_NEG = 0x0B, /*! Auth Negotiate */
+ FC_AUTH_MC_AUTH_DONE = 0x0C, /*! Auth Done */
+
+ FC_AUTH_MC_DHCHAP_CHAL = 0x10, /*! DHCHAP Challenge */
+ FC_AUTH_MC_DHCHAP_REPLY = 0x11, /*! DHCHAP Reply */
+ FC_AUTH_MC_DHCHAP_SUCC = 0x12, /*! DHCHAP Success */
+
+ FC_AUTH_MC_FCAP_REQ = 0x13, /*! FCAP Request */
+ FC_AUTH_MC_FCAP_ACK = 0x14, /*! FCAP Acknowledge */
+ FC_AUTH_MC_FCAP_CONF = 0x15, /*! FCAP Confirm */
+
+ FC_AUTH_MC_FCPAP_INIT = 0x16, /*! FCPAP Init */
+ FC_AUTH_MC_FCPAP_ACC = 0x17, /*! FCPAP Accept */
+ FC_AUTH_MC_FCPAP_COMP = 0x18, /*! FCPAP Complete */
+
+ FC_AUTH_MC_IKE_SA_INIT = 0x22, /*! IKE SA INIT */
+ FC_AUTH_MC_IKE_SA_AUTH = 0x23, /*! IKE SA Auth */
+ FC_AUTH_MC_IKE_CREATE_CHILD_SA = 0x24, /*! IKE Create Child SA */
+ FC_AUTH_MC_IKE_INFO = 0x25, /*! IKE informational */
+} auth_msg_codes_t;
+
+typedef enum {
+ FC_AUTH_PROTO_VER_1 = 1, /*! Protocol Version 1 */
+} auth_proto_version_t;
+
+enum {
+ FC_AUTH_ELS_COMMAND_CODE = 0x90,/*! Authentication ELS Command code */
+ FC_AUTH_PROTO_PARAM_LEN_SZ = 4, /*! Size of Proto Parameter Len Field */
+ FC_AUTH_PROTO_PARAM_VAL_SZ = 4, /*! Size of Proto Parameter Val Field */
+ FC_MAX_AUTH_SECRET_LEN = 256,
+ /*! Maximum secret string length */
+ FC_AUTH_NUM_USABLE_PROTO_LEN_SZ = 4,
+ /*! Size of usable protocols field */
+ FC_AUTH_RESP_VALUE_LEN_SZ = 4,
+ /*! Size of response value length */
+ FC_MAX_CHAP_KEY_LEN = 256, /*! Maximum md5 digest length */
+ FC_MAX_AUTH_RETRIES = 3, /*! Maximum number of retries */
+ FC_MD5_DIGEST_LEN = 16, /*! MD5 digest length */
+ FC_SHA1_DIGEST_LEN = 20, /*! SHA1 digest length */
+ FC_MAX_DHG_SUPPORTED = 1, /*! Maximum DH Groups supported */
+ FC_MAX_ALG_SUPPORTED = 1, /*! Maximum algorithms supported */
+ FC_MAX_PROTO_SUPPORTED = 1, /*! Maximum protocols supported */
+ FC_START_TXN_ID = 2, /*! Starting transaction ID */
+};
+
+typedef enum {
+ FC_AUTH_PROTO_DHCHAP = 0x00000001,
+ FC_AUTH_PROTO_FCAP = 0x00000002,
+ FC_AUTH_PROTO_FCPAP = 0x00000003,
+ FC_AUTH_PROTO_IKEv2 = 0x00000004,
+ FC_AUTH_PROTO_IKEv2_AUTH = 0x00000005,
+} auth_proto_id_t;
+
+typedef struct {
+ u16 name_tag; /*! Name Tag = 1 for Authentication */
+ u16 name_len; /*! Name Length = 8 for Authentication
+ */
+ wwn_t name; /*! Name. TODO - is this PWWN */
+} auth_name_t;
+
+
+typedef enum {
+ FC_AUTH_HASH_FUNC_MD5 = 0x00000005,
+ FC_AUTH_HASH_FUNC_SHA_1 = 0x00000006,
+} auth_hash_func_t;
+
+typedef enum {
+ FC_AUTH_DH_GID_0_DHG_NULL = 0x00000000,
+ FC_AUTH_DH_GID_1_DHG_1024 = 0x00000001,
+ FC_AUTH_DH_GID_2_DHG_1280 = 0x00000002,
+ FC_AUTH_DH_GID_3_DHG_1536 = 0x00000003,
+ FC_AUTH_DH_GID_4_DHG_2048 = 0x00000004,
+ FC_AUTH_DH_GID_6_DHG_3072 = 0x00000006,
+ FC_AUTH_DH_GID_7_DHG_4096 = 0x00000007,
+ FC_AUTH_DH_GID_8_DHG_6144 = 0x00000008,
+ FC_AUTH_DH_GID_9_DHG_8192 = 0x00000009,
+} auth_dh_gid_t;
+
+typedef struct auth_els_msg {
+ u8 auth_els_code; /* Authentication ELS Code (0x90) */
+ u8 auth_els_flag; /* Authentication ELS Flags */
+ u8 auth_msg_code; /* Authentication Message Code */
+ u8 proto_version; /* Protocol Version */
+ u32 msg_len; /* Message Length */
+ u32 trans_id; /* Transaction Identifier (T_ID) */
+
+ /* Msg payload follows... */
+} auth_els_msg_t;
+
+
+typedef enum auth_neg_param_tags {
+ FC_AUTH_NEG_DHCHAP_HASHLIST = 0x0001,
+ FC_AUTH_NEG_DHCHAP_DHG_ID_LIST = 0x0002,
+} auth_neg_param_tags_t;
+
+
+typedef struct dhchap_param_format {
+ u16 tag; /*! Parameter Tag. See
+ * auth_neg_param_tags_t
+ */
+ u16 word_cnt;
+
+ /* followed by variable length parameter value... */
+} dhchap_param_format_t;
+
+typedef struct auth_proto_params {
+ u32 proto_param_len;
+ u32 proto_id;
+
+ /*
+ * Followed by variable length Protocol specific parameters. DH-CHAP
+ * uses dhchap_param_format_t
+ */
+} auth_proto_params_t;
+
+typedef struct auth_neg_msg {
+ auth_name_t auth_ini_name;
+ u32 usable_auth_protos;
+ auth_proto_params_t proto_params[1]; /*! (1..usable_auth_proto)
+ * protocol params
+ */
+} auth_neg_msg_t;
+
+typedef struct auth_dh_val {
+ u32 dh_val_len;
+ u32 dh_val[1];
+} auth_dh_val_t;
+
+typedef struct auth_dhchap_chal_msg {
+ auth_els_msg_t hdr;
+ auth_name_t auth_responder_name; /* TODO VRK - is auth_name_t
+ * type OK?
+ */
+ u32 hash_id;
+ u32 dh_grp_id;
+ u32 chal_val_len;
+ char chal_val[1];
+
+ /* ...followed by variable Challenge length/value and DH length/value */
+} auth_dhchap_chal_msg_t;
+
+
+typedef enum auth_rjt_codes_s {
+ FC_AUTH_RJT_CODE_AUTH_FAILURE = 0x01,
+ FC_AUTH_RJT_CODE_LOGICAL_ERR = 0x02,
+} auth_rjt_codes_t;
+
+typedef enum auth_rjt_code_exps_s {
+ FC_AUTH_CEXP_AUTH_MECH_NOT_USABLE = 0x01,
+ FC_AUTH_CEXP_DH_GROUP_NOT_USABLE = 0x02,
+ FC_AUTH_CEXP_HASH_FUNC_NOT_USABLE = 0x03,
+ FC_AUTH_CEXP_AUTH_XACT_STARTED = 0x04,
+ FC_AUTH_CEXP_AUTH_FAILED = 0x05,
+ FC_AUTH_CEXP_INCORRECT_PLD = 0x06,
+ FC_AUTH_CEXP_INCORRECT_PROTO_MSG = 0x07,
+ FC_AUTH_CEXP_RESTART_AUTH_PROTO = 0x08,
+ FC_AUTH_CEXP_AUTH_CONCAT_NOT_SUPP = 0x09,
+ FC_AUTH_CEXP_PROTO_VER_NOT_SUPP = 0x0A,
+} auth_rjt_code_exps_t;
+
+typedef enum auth_status_s {
+ FC_AUTH_STATE_INPROGRESS = 0, /*! authentication in progress */
+ FC_AUTH_STATE_FAILED = 1, /*! authentication failed */
+ FC_AUTH_STATE_SUCCESS = 2 /*! authentication successful */
+} auth_status_t;
+
+typedef struct auth_rjt_msg {
+ auth_els_msg_t hdr;
+ u8 reason_code;
+ u8 reason_code_exp;
+ u8 rsvd[2];
+} auth_rjt_msg_t;
+
+typedef auth_els_msg_t auth_done_msg_t; /*! Auth done msg has no payload */
+
+typedef struct auth_dhchap_neg_msg_s {
+ auth_els_msg_t hdr;
+ auth_neg_msg_t nego;
+} auth_dhchap_neg_msg_t;
+
+typedef struct auth_dhchap_reply_msg_s {
+ auth_els_msg_t hdr;
+
+ /*
+ * followed by response value length & Value + DH Value Length & Value
+ */
+} auth_dhchap_reply_msg_t;
+
+#pragma pack()
+
+#endif /* __FC_SP_H__ */
diff -urpN orig/drivers/scsi/bfa/include/protocol/fdmi.h patch/drivers/scsi/bfa/include/protocol/fdmi.h
--- orig/drivers/scsi/bfa/include/protocol/fdmi.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/protocol/fdmi.h 2009-03-14 11:44:58.130298000 -0700
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FDMI_H__
+#define __FDMI_H__
+
+#include <protocol/types.h>
+#include <protocol/fc.h>
+#include <protocol/ct.h>
+
+#pragma pack(1)
+
+/*
+ * FDMI Command Codes
+ */
+#define FDMI_GRHL 0x0100
+#define FDMI_GHAT 0x0101
+#define FDMI_GRPL 0x0102
+#define FDMI_GPAT 0x0110
+#define FDMI_RHBA 0x0200
+#define FDMI_RHAT 0x0201
+#define FDMI_RPRT 0x0210
+#define FDMI_RPA 0x0211
+#define FDMI_DHBA 0x0300
+#define FDMI_DPRT 0x0310
+
+/*
+ * FDMI reason codes
+ */
+#define FDMI_NO_ADDITIONAL_EXP 0x00
+#define FDMI_HBA_ALREADY_REG 0x10
+#define FDMI_HBA_ATTRIB_NOT_REG 0x11
+#define FDMI_HBA_ATTRIB_MULTIPLE 0x12
+#define FDMI_HBA_ATTRIB_LENGTH_INVALID 0x13
+#define FDMI_HBA_ATTRIB_NOT_PRESENT 0x14
+#define FDMI_PORT_ORIG_NOT_IN_LIST 0x15
+#define FDMI_PORT_HBA_NOT_IN_LIST 0x16
+#define FDMI_PORT_ATTRIB_NOT_REG 0x20
+#define FDMI_PORT_NOT_REG 0x21
+#define FDMI_PORT_ATTRIB_MULTIPLE 0x22
+#define FDMI_PORT_ATTRIB_LENGTH_INVALID 0x23
+#define FDMI_PORT_ALREADY_REGISTEREED 0x24
+
+/*
+ * FDMI Transmission Speed Mask values
+ */
+#define FDMI_TRANS_SPEED_1G 0x00000001
+#define FDMI_TRANS_SPEED_2G 0x00000002
+#define FDMI_TRANS_SPEED_10G 0x00000004
+#define FDMI_TRANS_SPEED_4G 0x00000008
+#define FDMI_TRANS_SPEED_8G 0x00000010
+#define FDMI_TRANS_SPEED_16G 0x00000020
+#define FDMI_TRANS_SPEED_UNKNOWN 0x00008000
+
+/*
+ * FDMI HBA attribute types
+ */
+enum fdmi_hba_attribute_type {
+ FDMI_HBA_ATTRIB_NODENAME = 1, /* 0x0001 */
+ FDMI_HBA_ATTRIB_MANUFACTURER, /* 0x0002 */
+ FDMI_HBA_ATTRIB_SERIALNUM, /* 0x0003 */
+ FDMI_HBA_ATTRIB_MODEL, /* 0x0004 */
+ FDMI_HBA_ATTRIB_MODEL_DESC, /* 0x0005 */
+ FDMI_HBA_ATTRIB_HW_VERSION, /* 0x0006 */
+ FDMI_HBA_ATTRIB_DRIVER_VERSION, /* 0x0007 */
+ FDMI_HBA_ATTRIB_ROM_VERSION, /* 0x0008 */
+ FDMI_HBA_ATTRIB_FW_VERSION, /* 0x0009 */
+ FDMI_HBA_ATTRIB_OS_NAME, /* 0x000A */
+ FDMI_HBA_ATTRIB_MAX_CT, /* 0x000B */
+
+ FDMI_HBA_ATTRIB_MAX_TYPE
+};
+
+/*
+ * FDMI Port attribute types
+ */
+enum fdmi_port_attribute_type {
+ FDMI_PORT_ATTRIB_FC4_TYPES = 1, /* 0x0001 */
+ FDMI_PORT_ATTRIB_SUPP_SPEED, /* 0x0002 */
+ FDMI_PORT_ATTRIB_PORT_SPEED, /* 0x0003 */
+ FDMI_PORT_ATTRIB_FRAME_SIZE, /* 0x0004 */
+ FDMI_PORT_ATTRIB_DEV_NAME, /* 0x0005 */
+ FDMI_PORT_ATTRIB_HOST_NAME, /* 0x0006 */
+
+ FDMI_PORT_ATTR_MAX_TYPE
+};
+
+/*
+ * FDMI attribute
+ */
+typedef struct fdmi_attr_s {
+ u16 type;
+ u16 len;
+ u8 value[1];
+} fdmi_attr_t;
+
+/*
+ * HBA Attribute Block
+ */
+typedef struct fdmi_hba_attr_s {
+ u32 attr_count; /* # of attributes */
+ fdmi_attr_t hba_attr; /* n attributes */
+} fdmi_hba_attr_t;
+
+/*
+ * Registered Port List
+ */
+typedef struct fdmi_port_list_s {
+ u32 num_ports; /* number Of Port Entries */
+ wwn_t port_entry; /* one or more */
+} fdmi_port_list_t;
+
+/*
+ * Port Attribute Block
+ */
+typedef struct fdmi_port_attr_s {
+ u32 attr_count; /* # of attributes */
+ fdmi_attr_t port_attr; /* n attributes */
+} fdmi_port_attr_t;
+
+/*
+ * FDMI Register HBA Attributes
+ */
+typedef struct fdmi_rhba_s {
+ wwn_t hba_id; /* HBA Identifier */
+ fdmi_port_list_t port_list; /* Registered Port List */
+ fdmi_hba_attr_t hba_attr_blk; /* HBA attribute block */
+} fdmi_rhba_t;
+
+/*
+ * FDMI Register Port
+ */
+typedef struct fdmi_rprt_s {
+ wwn_t hba_id; /* HBA Identifier */
+ wwn_t port_name; /* Port wwn */
+ fdmi_port_attr_t port_attr_blk; /* Port Attr Block */
+} fdmi_rprt_t;
+
+/*
+ * FDMI Register Port Attributes
+ */
+typedef struct fdmi_rpa_s {
+ wwn_t port_name; /* port wwn */
+ fdmi_port_attr_t port_attr_blk; /* Port Attr Block */
+} fdmi_rpa_t;
+
+#pragma pack()
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/protocol/pcifw.h patch/drivers/scsi/bfa/include/protocol/pcifw.h
--- orig/drivers/scsi/bfa/include/protocol/pcifw.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/protocol/pcifw.h 2009-03-14 11:44:58.137044000 -0700
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * pcifw.h PCI FW related headers
+ */
+
+#ifndef __PCIFW_H__
+#define __PCIFW_H__
+
+#pragma pack(1)
+
+typedef struct {
+ u32 signature; /* "$PnP" */
+ u8 rev; /* Struct revision */
+ u8 len; /* Header structure len in multiples of 16 bytes */
+ u16 off; /* Offset to next header 00 if none */
+ u8 rsvd; /* Reserved byte */
+ u8 cksum; /* 8-bit checksum for this header */
+ u32 pnp_dev_id; /* PnP Device Id */
+ u16 mfstr; /* Pointer to manufacturer string */
+ u16 prstr; /* Pointer to product string */
+ u8 devtype[3]; /* Device Type Code */
+ u8 devind; /* Device Indicator */
+ u16 bcventr; /* Bootstrap entry vector */
+ u16 rsvd2; /* Reserved */
+ u16 sriv; /* Static resource information vector */
+} pnp_hdr_t;
+
+typedef struct {
+ u32 sig; /* Signature "PCIR" */
+ u16 vendid; /* Vendor ID */
+ u16 devid; /* Device ID */
+ u16 devlistoff; /* Device List Offset */
+ u16 len; /* PCI Data Structure Length */
+ u8 rev; /* PCI Data Structure Revision */
+ u8 clcode[3]; /* Class Code */
+ u16 imglen; /* Code image length in multiples of 512 bytes */
+ u16 coderev; /* Revision level of code/data */
+ u8 codetype; /* Code type 0x00 - BIOS */
+ u8 indr; /* Last image indicator */
+ u16 mrtimglen; /* Max Run Time Image Length */
+ u16 cuoff; /* Config Utility Code Header Offset */
+ u16 dmtfclp; /* DMTF CLP entry point offset */
+} pci_3_0_ds_t;
+
+typedef struct {
+ u16 sig; /* Signature 0x55AA */
+ u8 len; /* Option ROM length in units of 512 bytes */
+ u8 inivec[3]; /* Initialization vector */
+ u8 rsvd[16]; /* Reserved field */
+ u16 verptr; /* Pointer to version string - private */
+ u16 pcids; /* Pointer to PCI data structure */
+ u16 pnphdr; /* Pointer to PnP expansion header */
+} pci_optrom_hdr_t;
+
+#pragma pack()
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/protocol/scsi.h patch/drivers/scsi/bfa/include/protocol/scsi.h
--- orig/drivers/scsi/bfa/include/protocol/scsi.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/protocol/scsi.h 2009-03-14 11:44:58.108414000 -0700
@@ -0,0 +1,1644 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __SCSI_H__
+#define __SCSI_H__
+
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+/*
+ * generic SCSI cdb definition
+ */
+#define SCSI_MAX_CDBLEN 16
+typedef struct {
+ u8 scsi_cdb[SCSI_MAX_CDBLEN];
+} scsi_cdb_t;
+
+/*
+ * scsi lun serial number definition
+ */
+#define SCSI_LUN_SN_LEN 32
+typedef struct {
+ u8 lun_sn[SCSI_LUN_SN_LEN];
+} scsi_lun_sn_t;
+
+/*
+ * SCSI Direct Access Commands
+ */
+enum {
+ SCSI_OP_TEST_UNIT_READY = 0x00,
+ SCSI_OP_REQUEST_SENSE = 0x03,
+ SCSI_OP_FORMAT_UNIT = 0x04,
+ SCSI_OP_READ6 = 0x08,
+ SCSI_OP_WRITE6 = 0x0A,
+ SCSI_OP_WRITE_FILEMARKS = 0x10,
+ SCSI_OP_INQUIRY = 0x12,
+ SCSI_OP_MODE_SELECT6 = 0x15,
+ SCSI_OP_RESERVE6 = 0x16,
+ SCSI_OP_RELEASE6 = 0x17,
+ SCSI_OP_MODE_SENSE6 = 0x1A,
+ SCSI_OP_START_STOP_UNIT = 0x1B,
+ SCSI_OP_SEND_DIAGNOSTIC = 0x1D,
+ SCSI_OP_READ_CAPACITY = 0x25,
+ SCSI_OP_READ10 = 0x28,
+ SCSI_OP_WRITE10 = 0x2A,
+ SCSI_OP_VERIFY10 = 0x2F,
+ SCSI_OP_READ_DEFECT_DATA = 0x37,
+ SCSI_OP_LOG_SELECT = 0x4C,
+ SCSI_OP_LOG_SENSE = 0x4D,
+ SCSI_OP_MODE_SELECT10 = 0x55,
+ SCSI_OP_RESERVE10 = 0x56,
+ SCSI_OP_RELEASE10 = 0x57,
+ SCSI_OP_MODE_SENSE10 = 0x5A,
+ SCSI_OP_PER_RESERVE_IN = 0x5E,
+ SCSI_OP_PER_RESERVE_OUR = 0x5E,
+ SCSI_OP_READ16 = 0x88,
+ SCSI_OP_WRITE16 = 0x8A,
+ SCSI_OP_VERIFY16 = 0x8F,
+ SCSI_OP_READ_CAPACITY16 = 0x9E,
+ SCSI_OP_REPORT_LUNS = 0xA0,
+ SCSI_OP_READ12 = 0xA8,
+ SCSI_OP_WRITE12 = 0xAA,
+ SCSI_OP_UNDEF = 0xFF,
+};
+
+/*
+ * SCSI START_STOP_UNIT command
+ */
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 lun:3;
+ u8 reserved1:4;
+ u8 immed:1;
+#else
+ u8 immed:1;
+ u8 reserved1:4;
+ u8 lun:3;
+#endif
+ u8 reserved2;
+ u8 reserved3;
+#ifdef __BIGENDIAN
+ u8 power_conditions:4;
+ u8 reserved4:2;
+ u8 loEj:1;
+ u8 start:1;
+#else
+ u8 start:1;
+ u8 loEj:1;
+ u8 reserved4:2;
+ u8 power_conditions:4;
+#endif
+ u8 control;
+} scsi_start_stop_unit_t;
+
+/*
+ * SCSI SEND_DIAGNOSTIC command
+ */
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 self_test_code:3;
+ u8 pf:1;
+ u8 reserved1:1;
+ u8 self_test:1;
+ u8 dev_offl:1;
+ u8 unit_offl:1;
+#else
+ u8 unit_offl:1;
+ u8 dev_offl:1;
+ u8 self_test:1;
+ u8 reserved1:1;
+ u8 pf:1;
+ u8 self_test_code:3;
+#endif
+ u8 reserved2;
+
+ u8 param_list_length[2]; /* MSB first */
+ u8 control;
+
+} scsi_send_diagnostic_t;
+
+/*
+ * SCSI READ10/WRITE10 commands
+ */
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 lun:3;
+ u8 dpo:1; /* Disable Page Out */
+ u8 fua:1; /* Force Unit Access */
+ u8 reserved1:2;
+ u8 rel_adr:1; /* relative address */
+#else
+ u8 rel_adr:1;
+ u8 reserved1:2;
+ u8 fua:1;
+ u8 dpo:1;
+ u8 lun:3;
+#endif
+ u8 lba0; /* logical block address - MSB */
+ u8 lba1;
+ u8 lba2;
+ u8 lba3; /* LSB */
+ u8 reserved3;
+ u8 xfer_length0; /* transfer length in blocks - MSB */
+ u8 xfer_length1; /* LSB */
+ u8 control;
+} scsi_rw10_t;
+
+#define SCSI_CDB10_GET_LBA(cdb) \
+ (((cdb)->lba0 << 24) | ((cdb)->lba1 << 16) | \
+ ((cdb)->lba2 << 8) | (cdb)->lba3)
+
+#define SCSI_CDB10_SET_LBA(cdb, lba) { \
+ (cdb)->lba0 = lba >> 24; \
+ (cdb)->lba1 = (lba >> 16) & 0xFF; \
+ (cdb)->lba2 = (lba >> 8) & 0xFF; \
+ (cdb)->lba3 = lba & 0xFF; \
+}
+
+#define SCSI_CDB10_GET_TL(cdb) \
+ ((cdb)->xfer_length0 << 8 | (cdb)->xfer_length1)
+#define SCSI_CDB10_SET_TL(cdb, tl) { \
+ (cdb)->xfer_length0 = tl >> 8; \
+ (cdb)->xfer_length1 = tl & 0xFF; \
+}
+
+/*
+ * SCSI READ6/WRITE6 commands
+ */
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 lun:3;
+ u8 lba0:5; /* MSb */
+#else
+ u8 lba0:5; /* MSb */
+ u8 lun:3;
+#endif
+ u8 lba1;
+ u8 lba2; /* LSB */
+ u8 xfer_length;
+ u8 control;
+} scsi_rw6_t;
+
+#define SCSI_TAPE_CDB6_GET_TL(cdb) \
+ (((cdb)->tl0 << 16) | ((cdb)->tl1 << 8) | (cdb)->tl2)
+
+#define SCSI_TAPE_CDB6_SET_TL(cdb, tl) { \
+ (cdb)->tl0 = tl >> 16; \
+ (cdb)->tl1 = (tl >> 8) & 0xFF; \
+ (cdb)->tl2 = tl & 0xFF; \
+}
+
+/*
+ * SCSI sequential (TAPE) wrtie command
+ */
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 rsvd:7;
+ u8 fixed:1; /* MSb */
+#else
+ u8 fixed:1; /* MSb */
+ u8 rsvd:7;
+#endif
+ u8 tl0; /* Msb */
+ u8 tl1;
+ u8 tl2; /* Lsb */
+
+ u8 control;
+} scsi_tape_wr_t;
+
+#define SCSI_CDB6_GET_LBA(cdb) \
+ (((cdb)->lba0 << 16) | ((cdb)->lba1 << 8) | (cdb)->lba2)
+
+#define SCSI_CDB6_SET_LBA(cdb, lba) { \
+ (cdb)->lba0 = lba >> 16; \
+ (cdb)->lba1 = (lba >> 8) & 0xFF; \
+ (cdb)->lba2 = lba & 0xFF; \
+}
+
+#define SCSI_CDB6_GET_TL(cdb) ((cdb)->xfer_length)
+#define SCSI_CDB6_SET_TL(cdb, tl) { \
+ (cdb)->xfer_length = tl; \
+}
+
+/*
+ * SCSI sense data format
+ */
+typedef struct {
+#ifdef __BIGENDIAN
+ u8 valid:1;
+ u8 rsp_code:7;
+#else
+ u8 rsp_code:7;
+ u8 valid:1;
+#endif
+ u8 seg_num;
+#ifdef __BIGENDIAN
+ u8 file_mark:1;
+ u8 eom:1; /* end of media */
+ u8 ili:1; /* incorrect length indicator */
+ u8 reserved:1;
+ u8 sense_key:4;
+#else
+ u8 sense_key:4;
+ u8 reserved:1;
+ u8 ili:1; /* incorrect length indicator */
+ u8 eom:1; /* end of media */
+ u8 file_mark:1;
+#endif
+ u8 information[4]; /* device-type or command specific info
+ */
+ u8 add_sense_length;
+ /* additional sense length */
+ u8 command_info[4];/* command specific information
+ */
+ u8 asc; /* additional sense code */
+ u8 ascq; /* additional sense code qualifier */
+ u8 fru_code; /* field replaceable unit code */
+#ifdef __BIGENDIAN
+ u8 sksv:1; /* sense key specific valid */
+ u8 c_d:1; /* command/data bit */
+ u8 res1:2;
+ u8 bpv:1; /* bit pointer valid */
+ u8 bpointer:3; /* bit pointer */
+#else
+ u8 bpointer:3; /* bit pointer */
+ u8 bpv:1; /* bit pointer valid */
+ u8 res1:2;
+ u8 c_d:1; /* command/data bit */
+ u8 sksv:1; /* sense key specific valid */
+#endif
+ u8 fpointer[2]; /* field pointer */
+} scsi_sense_t;
+
+#define SCSI_SENSE_CUR_ERR 0x70
+#define SCSI_SENSE_DEF_ERR 0x71
+
+/*
+ * SCSI sense key values
+ */
+#define SCSI_SK_NO_SENSE 0x0
+#define SCSI_SK_REC_ERR 0x1 /* recovered error */
+#define SCSI_SK_NOT_READY 0x2
+#define SCSI_SK_MED_ERR 0x3 /* medium error */
+#define SCSI_SK_HW_ERR 0x4 /* hardware error */
+#define SCSI_SK_ILLEGAL_REQ 0x5
+#define SCSI_SK_UNIT_ATT 0x6 /* unit attention */
+#define SCSI_SK_DATA_PROTECT 0x7
+#define SCSI_SK_BLANK_CHECK 0x8
+#define SCSI_SK_VENDOR_SPEC 0x9
+#define SCSI_SK_COPY_ABORTED 0xA
+#define SCSI_SK_ABORTED_CMND 0xB
+#define SCSI_SK_VOL_OVERFLOW 0xD
+#define SCSI_SK_MISCOMPARE 0xE
+
+/*
+ * SCSI additional sense codes
+ */
+#define SCSI_ASC_NO_ADD_SENSE 0x00
+#define SCSI_ASC_LUN_NOT_READY 0x04
+#define SCSI_ASC_LUN_COMMUNICATION 0x08
+#define SCSI_ASC_WRITE_ERROR 0x0C
+#define SCSI_ASC_INVALID_CMND_CODE 0x20
+#define SCSI_ASC_BAD_LBA 0x21
+#define SCSI_ASC_INVALID_FIELD_IN_CDB 0x24
+#define SCSI_ASC_LUN_NOT_SUPPORTED 0x25
+#define SCSI_ASC_LUN_WRITE_PROTECT 0x27
+#define SCSI_ASC_POWERON_BDR 0x29 /* power on reset, bus reset,
+ * bus device reset
+ */
+#define SCSI_ASC_PARAMS_CHANGED 0x2A
+#define SCSI_ASC_CMND_CLEARED_BY_A_I 0x2F
+#define SCSI_ASC_SAVING_PARAM_NOTSUPP 0x39
+#define SCSI_ASC_TOCC 0x3F /* target operating condtions
+ * changed
+ */
+#define SCSI_ASC_PARITY_ERROR 0x47
+#define SCSI_ASC_CMND_PHASE_ERROR 0x4A
+#define SCSI_ASC_DATA_PHASE_ERROR 0x4B
+#define SCSI_ASC_VENDOR_SPEC 0x7F
+
+/*
+ * SCSI additional sense code qualifiers
+ */
+#define SCSI_ASCQ_CAUSE_NOT_REPORT 0x00
+#define SCSI_ASCQ_BECOMING_READY 0x01
+#define SCSI_ASCQ_INIT_CMD_REQ 0x02
+#define SCSI_ASCQ_FORMAT_IN_PROGRESS 0x04
+#define SCSI_ASCQ_OPERATION_IN_PROGRESS 0x07
+#define SCSI_ASCQ_SELF_TEST_IN_PROGRESS 0x09
+#define SCSI_ASCQ_WR_UNEXP_UNSOL_DATA 0x0C
+#define SCSI_ASCQ_WR_NOTENG_UNSOL_DATA 0x0D
+
+#define SCSI_ASCQ_LBA_OUT_OF_RANGE 0x00
+#define SCSI_ASCQ_INVALID_ELEMENT_ADDR 0x01
+
+#define SCSI_ASCQ_LUN_WRITE_PROTECTED 0x00
+#define SCSI_ASCQ_LUN_HW_WRITE_PROTECTED 0x01
+#define SCSI_ASCQ_LUN_SW_WRITE_PROTECTED 0x02
+
+#define SCSI_ASCQ_POR 0x01 /* power on reset */
+#define SCSI_ASCQ_SBR 0x02 /* scsi bus reset */
+#define SCSI_ASCQ_BDR 0x03 /* bus device reset */
+#define SCSI_ASCQ_DIR 0x04 /* device internal reset */
+
+#define SCSI_ASCQ_MODE_PARAMS_CHANGED 0x01
+#define SCSI_ASCQ_LOG_PARAMS_CHANGED 0x02
+#define SCSI_ASCQ_RESERVATIONS_PREEMPTED 0x03
+#define SCSI_ASCQ_RESERVATIONS_RELEASED 0x04
+#define SCSI_ASCQ_REGISTRATIONS_PREEMPTED 0x05
+
+#define SCSI_ASCQ_MICROCODE_CHANGED 0x01
+#define SCSI_ASCQ_CHANGED_OPER_COND 0x02
+#define SCSI_ASCQ_INQ_CHANGED 0x03 /* inquiry data changed */
+#define SCSI_ASCQ_DI_CHANGED 0x05 /* device id changed */
+#define SCSI_ASCQ_RL_DATA_CHANGED 0x0E /* report luns data changed */
+
+#define SCSI_ASCQ_DP_CRC_ERR 0x01 /* data phase crc error */
+#define SCSI_ASCQ_DP_SCSI_PARITY_ERR 0x02 /* data phase scsi parity error
+ */
+#define SCSI_ASCQ_IU_CRC_ERR 0x03 /* information unit crc error */
+#define SCSI_ASCQ_PROTO_SERV_CRC_ERR 0x05
+
+#define SCSI_ASCQ_LUN_TIME_OUT 0x01
+
+/* ------------------------------------------------------------
+ * SCSI INQUIRY
+ * ------------------------------------------------------------*/
+
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 lun:3;
+ u8 reserved1:3;
+ u8 cmd_dt:1;
+ u8 evpd:1;
+#else
+ u8 evpd:1;
+ u8 cmd_dt:1;
+ u8 reserved1:3;
+ u8 lun:3;
+#endif
+ u8 page_code;
+ u8 reserved2;
+ u8 alloc_length;
+ u8 control;
+} scsi_inquiry_t;
+
+typedef struct {
+ u8 vendor_id[8];
+} scsi_inquiry_vendor_t;
+
+typedef struct {
+ u8 product_id[16];
+} scsi_inquiry_prodid_t;
+
+typedef struct {
+ u8 product_rev[4];
+} scsi_inquiry_prodrev_t;
+
+typedef struct {
+#ifdef __BIGENDIAN
+ u8 peripheral_qual:3; /* peripheral qualifier */
+ u8 device_type:5; /* peripheral device type */
+
+ u8 rmb:1; /* removable medium bit */
+ u8 device_type_mod:7; /* device type modifier */
+
+ u8 version;
+
+ u8 aenc:1; /* async event notification capability
+ */
+ u8 trm_iop:1; /* terminate I/O process */
+ u8 norm_aca:1; /* normal ACA supported */
+ u8 hi_support:1; /* SCSI-3: supports REPORT LUNS */
+ u8 rsp_data_format:4;
+
+ u8 additional_len;
+ u8 sccs:1;
+ u8 reserved1:7;
+
+ u8 reserved2:1;
+ u8 enc_serv:1; /* enclosure service component */
+ u8 reserved3:1;
+ u8 multi_port:1; /* multi-port device */
+ u8 m_chngr:1; /* device in medium transport element */
+ u8 ack_req_q:1; /* SIP specific bit */
+ u8 addr32:1; /* SIP specific bit */
+ u8 addr16:1; /* SIP specific bit */
+
+ u8 rel_adr:1; /* relative address */
+ u8 w_bus32:1;
+ u8 w_bus16:1;
+ u8 synchronous:1;
+ u8 linked_commands:1;
+ u8 trans_dis:1;
+ u8 cmd_queue:1; /* command queueing supported */
+ u8 soft_reset:1; /* soft reset alternative (VS) */
+#else
+ u8 device_type:5; /* peripheral device type */
+ u8 peripheral_qual:3;
+ /* peripheral qualifier */
+
+ u8 device_type_mod:7;
+ /* device type modifier */
+ u8 rmb:1; /* removable medium bit */
+
+ u8 version;
+
+ u8 rsp_data_format:4;
+ u8 hi_support:1; /* SCSI-3: supports REPORT LUNS */
+ u8 norm_aca:1; /* normal ACA supported */
+ u8 terminate_iop:1;/* terminate I/O process */
+ u8 aenc:1; /* async event notification capability
+ */
+
+ u8 additional_len;
+ u8 reserved1:7;
+ u8 sccs:1;
+
+ u8 addr16:1; /* SIP specific bit */
+ u8 addr32:1; /* SIP specific bit */
+ u8 ack_req_q:1; /* SIP specific bit */
+ u8 m_chngr:1; /* device in medium transport element */
+ u8 multi_port:1; /* multi-port device */
+ u8 reserved3:1; /* TBD - Vendor Specific */
+ u8 enc_serv:1; /* enclosure service component */
+ u8 reserved2:1;
+
+ u8 soft_seset:1; /* soft reset alternative (VS) */
+ u8 cmd_queue:1; /* command queueing supported */
+ u8 trans_dis:1;
+ u8 linked_commands:1;
+ u8 synchronous:1;
+ u8 w_bus16:1;
+ u8 w_bus32:1;
+ u8 rel_adr:1; /* relative address */
+#endif
+ scsi_inquiry_vendor_t vendor_id;
+ scsi_inquiry_prodid_t product_id;
+ scsi_inquiry_prodrev_t product_rev;
+ u8 vendor_specific[20];
+ u8 reserved4[40];
+} scsi_inquiry_data_t;
+
+/*
+ * inquiry.peripheral_qual field values
+ */
+#define SCSI_DEVQUAL_DEFAULT 0
+#define SCSI_DEVQUAL_NOT_CONNECTED 1
+#define SCSI_DEVQUAL_NOT_SUPPORTED 3
+
+/*
+ * inquiry.device_type field values
+ */
+#define SCSI_DEVICE_DIRECT_ACCESS 0x00
+#define SCSI_DEVICE_SEQ_ACCESS 0x01
+#define SCSI_DEVICE_ARRAY_CONTROLLER 0x0C
+#define SCSI_DEVICE_UNKNOWN 0x1F
+
+/*
+ * inquiry.version
+ */
+#define SCSI_VERSION_ANSI_X3131 2 /* ANSI X3.131 SCSI-2 */
+#define SCSI_VERSION_SPC 3 /* SPC (SCSI-3), ANSI X3.301:1997 */
+#define SCSI_VERSION_SPC_2 4 /* SPC-2 */
+
+/*
+ * response data format
+ */
+#define SCSI_RSP_DATA_FORMAT 2 /* SCSI-2 & SPC */
+
+/*
+ * SCSI inquiry page codes
+ */
+#define SCSI_INQ_PAGE_VPD_PAGES 0x00 /* supported vpd pages */
+#define SCSI_INQ_PAGE_USN_PAGE 0x80 /* unit serial number page */
+#define SCSI_INQ_PAGE_DEV_IDENT 0x83 /* device indentification page
+ */
+#define SCSI_INQ_PAGES_MAX 3
+
+/*
+ * supported vital product data pages
+ */
+typedef struct {
+#ifdef __BIGENDIAN
+ u8 peripheral_qual:3;
+ u8 device_type:5;
+#else
+ u8 device_type:5;
+ u8 peripheral_qual:3;
+#endif
+ u8 page_code;
+ u8 reserved;
+ u8 page_length;
+ u8 pages[SCSI_INQ_PAGES_MAX];
+} scsi_inq_page_vpd_pages_t;
+
+/*
+ * Unit serial number page
+ */
+#define SCSI_INQ_USN_LEN 32
+
+typedef struct {
+ char usn[SCSI_INQ_USN_LEN];
+} scsi_inq_usn_t;
+
+typedef struct {
+#ifdef __BIGENDIAN
+ u8 peripheral_qual:3;
+ u8 device_type:5;
+#else
+ u8 device_type:5;
+ u8 peripheral_qual:3;
+#endif
+ u8 page_code;
+ u8 reserved1;
+ u8 page_length;
+ scsi_inq_usn_t usn;
+} scsi_inq_page_usn_t;
+
+enum {
+ SCSI_INQ_DIP_CODE_BINARY = 1, /* identifier has binary value */
+ SCSI_INQ_DIP_CODE_ASCII = 2, /* identifier has ascii value */
+};
+
+enum {
+ SCSI_INQ_DIP_ASSOC_LUN = 0, /* id is associated with device */
+ SCSI_INQ_DIP_ASSOC_PORT = 1, /* id is associated with port that
+ * received the request
+ */
+};
+
+enum {
+ SCSI_INQ_ID_TYPE_VENDOR = 1,
+ SCSI_INQ_ID_TYPE_IEEE = 2,
+ SCSI_INQ_ID_TYPE_FC_FS = 3,
+ SCSI_INQ_ID_TYPE_OTHER = 4,
+};
+
+typedef struct {
+#ifdef __BIGENDIAN
+ u8 res0:4;
+ u8 code_set:4;
+ u8 res1:2;
+ u8 association:2;
+ u8 id_type:4;
+#else
+ u8 code_set:4;
+ u8 res0:4;
+ u8 id_type:4;
+ u8 association:2;
+ u8 res1:2;
+#endif
+ u8 res2;
+ u8 id_len;
+ scsi_lun_sn_t id;
+} scsi_inq_dip_desc_t;
+
+/*
+ * Device indentification page
+ */
+typedef struct {
+#ifdef __BIGENDIAN
+ u8 peripheral_qual:3;
+ u8 device_type:5;
+#else
+ u8 device_type:5;
+ u8 peripheral_qual:3;
+#endif
+ u8 page_code;
+ u8 reserved1;
+ u8 page_length;
+ scsi_inq_dip_desc_t desc;
+} scsi_inq_page_dev_ident_t;
+
+/* ------------------------------------------------------------
+ * READ CAPACITY
+ * ------------------------------------------------------------
+ */
+
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 lun:3;
+ u8 reserved1:4;
+ u8 rel_adr:1;
+#else
+ u8 rel_adr:1;
+ u8 reserved1:4;
+ u8 lun:3;
+#endif
+ u8 lba0; /* MSB */
+ u8 lba1;
+ u8 lba2;
+ u8 lba3; /* LSB */
+ u8 reserved2;
+ u8 reserved3;
+#ifdef __BIGENDIAN
+ u8 reserved4:7;
+ u8 pmi:1; /* partial medium indicator */
+#else
+ u8 pmi:1; /* partial medium indicator */
+ u8 reserved4:7;
+#endif
+ u8 control;
+} scsi_read_capacity_t;
+
+typedef struct {
+ u32 max_lba; /* maximum LBA available */
+ u32 block_length; /* in bytes */
+} scsi_read_capacity_data_t;
+
+typedef struct {
+ u64 lba; /* maximum LBA available */
+ u32 block_length; /* in bytes */
+#ifdef __BIGENDIAN
+ u8 reserved1:4,
+ p_type:3,
+ prot_en:1;
+ u8 reserved2:4,
+ lb_pbe:4; /* logical blocks per physical block exponent */
+ u16 reserved3:2,
+ lba_align:14; /* lowest aligned logical block address */
+#else
+ u16 lba_align:14, /* lowest aligned logical block address */
+ reserved3:2;
+ u8 lb_pbe:4, /* logical blocks per physical block exponent */
+ reserved2:4;
+ u8 prot_en:1,
+ p_type:3,
+ reserved1:4;
+#endif
+ u64 reserved4;
+ u64 reserved5;
+} scsi_read_capacity16_data_t;
+
+/* ------------------------------------------------------------
+ * REPORT LUNS command
+ * ------------------------------------------------------------
+ */
+
+typedef struct {
+ u8 opcode; /* A0h - REPORT LUNS opCode */
+ u8 reserved1[5];
+ u8 alloc_length[4];/* allocation length MSB first */
+ u8 reserved2;
+ u8 control;
+} scsi_report_luns_t;
+
+#define SCSI_REPORT_LUN_ALLOC_LENGTH(rl) \
+ ((rl->alloc_length[0] << 24) | (rl->alloc_length[1] << 16) | \
+ (rl->alloc_length[2] << 8) | (rl->alloc_length[3]))
+
+#define SCSI_REPORT_LUNS_SET_ALLOCLEN(rl, alloc_len) { \
+ (rl)->alloc_length[0] = (alloc_len) >> 24; \
+ (rl)->alloc_length[1] = ((alloc_len) >> 16) & 0xFF; \
+ (rl)->alloc_length[2] = ((alloc_len) >> 8) & 0xFF; \
+ (rl)->alloc_length[3] = (alloc_len) & 0xFF; \
+}
+
+typedef struct {
+ u32 lun_list_length; /* length of LUN list length */
+ u32 reserved;
+ lun_t lun[1]; /* first LUN in lun list */
+} scsi_report_luns_data_t;
+
+/* -------------------------------------------------------------
+ * SCSI mode parameters
+ * -----------------------------------------------------------
+ */
+enum {
+ SCSI_DA_MEDIUM_DEF = 0, /* direct access default medium type */
+ SCSI_DA_MEDIUM_SS = 1, /* direct access single sided */
+ SCSI_DA_MEDIUM_DS = 2, /* direct access double sided */
+};
+
+/*
+ * SCSI Mode Select(6) cdb
+ */
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:3;
+ u8 pf:1; /* page format */
+ u8 reserved2:3;
+ u8 sp:1; /* save pages if set to 1 */
+#else
+ u8 sp:1; /* save pages if set to 1 */
+ u8 reserved2:3;
+ u8 pf:1; /* page format */
+ u8 reserved1:3;
+#endif
+ u8 reserved3[2];
+ u8 alloc_len;
+ u8 control;
+} scsi_mode_select6_t;
+
+/*
+ * SCSI Mode Select(10) cdb
+ */
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:3;
+ u8 pf:1; /* page format */
+ u8 reserved2:3;
+ u8 sp:1; /* save pages if set to 1 */
+#else
+ u8 sp:1; /* save pages if set to 1 */
+ u8 reserved2:3;
+ u8 pf:1; /* page format */
+ u8 reserved1:3;
+#endif
+ u8 reserved3[5];
+ u8 alloc_len_msb;
+ u8 alloc_len_lsb;
+ u8 control;
+} scsi_mode_select10_t;
+
+/*
+ * SCSI Mode Sense(6) cdb
+ */
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:4;
+ u8 dbd:1; /* disable block discriptors if set to 1 */
+ u8 reserved2:3;
+
+ u8 pc:2; /* page control */
+ u8 page_code:6;
+#else
+ u8 reserved2:3;
+ u8 dbd:1; /* disable block descriptors if set to 1 */
+ u8 reserved1:4;
+
+ u8 page_code:6;
+ u8 pc:2; /* page control */
+#endif
+ u8 reserved3;
+ u8 alloc_len;
+ u8 control;
+} scsi_mode_sense6_t;
+
+/*
+ * SCSI Mode Sense(10) cdb
+ */
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:3;
+ u8 LLBAA:1; /* long LBA accepted if set to 1 */
+ u8 dbd:1; /* disable block descriptors if set
+ * to 1
+ */
+ u8 reserved2:3;
+
+ u8 pc:2; /* page control */
+ u8 page_code:6;
+#else
+ u8 reserved2:3;
+ u8 dbd:1; /* disable block descriptors if set to
+ * 1
+ */
+ u8 LLBAA:1; /* long LBA accepted if set to 1 */
+ u8 reserved1:3;
+
+ u8 page_code:6;
+ u8 pc:2; /* page control */
+#endif
+ u8 reserved3[4];
+ u8 alloc_len_msb;
+ u8 alloc_len_lsb;
+ u8 control;
+} scsi_mode_sense10_t;
+
+#define SCSI_CDB10_GET_AL(cdb) \
+ ((cdb)->alloc_len_msb << 8 | (cdb)->alloc_len_lsb)
+
+#define SCSI_CDB10_SET_AL(cdb, al) { \
+ (cdb)->alloc_len_msb = al >> 8; \
+ (cdb)->alloc_len_lsb = al & 0xFF; \
+}
+
+#define SCSI_CDB6_GET_AL(cdb) ((cdb)->alloc_len)
+
+#define SCSI_CDB6_SET_AL(cdb, al) { \
+ (cdb)->alloc_len = al; \
+}
+
+/*
+ * page control field values
+ */
+#define SCSI_PC_CURRENT_VALUES 0x0
+#define SCSI_PC_CHANGEABLE_VALUES 0x1
+#define SCSI_PC_DEFAULT_VALUES 0x2
+#define SCSI_PC_SAVED_VALUES 0x3
+
+/*
+ * SCSI mode page codes
+ */
+#define SCSI_MP_VENDOR_SPEC 0x00
+#define SCSI_MP_DISC_RECN 0x02 /* disconnect-reconnect page */
+#define SCSI_MP_FORMAT_DEVICE 0x03
+#define SCSI_MP_RDG 0x04 /* rigid disk geometry page */
+#define SCSI_MP_FDP 0x05 /* flexible disk page */
+#define SCSI_MP_CACHING 0x08 /* caching page */
+#define SCSI_MP_CONTROL 0x0A /* control mode page */
+#define SCSI_MP_MED_TYPES_SUP 0x0B /* medium types supported page */
+#define SCSI_MP_INFO_EXCP_CNTL 0x1C /* informational exception control */
+#define SCSI_MP_ALL 0x3F /* return all pages - mode sense only */
+
+/*
+ * mode parameter header
+ */
+typedef struct {
+ u8 mode_datalen;
+ u8 medium_type;
+
+ /*
+ * device specific parameters expanded for direct access devices
+ */
+#ifdef __BIGENDIAN
+ u32 wp:1; /* write protected */
+ u32 reserved1:2;
+ u32 dpofua:1; /* disable page out + force unit access
+ */
+ u32 reserved2:4;
+#else
+ u32 reserved2:4;
+ u32 dpofua:1; /* disable page out + force unit access
+ */
+ u32 reserved1:2;
+ u32 wp:1; /* write protected */
+#endif
+
+ u8 block_desclen;
+} scsi_mode_param_header6_t;
+
+typedef struct {
+u32 mode_datalen:16;
+u32 medium_type:8;
+
+ /*
+ * device specific parameters expanded for direct access devices
+ */
+#ifdef __BIGENDIAN
+ u32 wp:1; /* write protected */
+ u32 reserved1:2;
+ u32 dpofua:1; /* disable page out + force unit access
+ */
+ u32 reserved2:4;
+#else
+ u32 reserved2:4;
+ u32 dpofua:1; /* disable page out + force unit access
+ */
+ u32 reserved1:2;
+ u32 wp:1; /* write protected */
+#endif
+
+#ifdef __BIGENDIAN
+ u32 reserved3:7;
+ u32 longlba:1;
+#else
+ u32 longlba:1;
+ u32 reserved3:7;
+#endif
+ u32 reserved4:8;
+ u32 block_desclen:16;
+} scsi_mode_param_header10_t;
+
+/*
+ * mode parameter block descriptor
+ */
+typedef struct {
+ u32 nblks;
+ u32 density_code:8;
+ u32 block_length:24;
+} scsi_mode_param_desc_t;
+
+/*
+ * Disconnect-reconnect mode page format
+ */
+typedef struct {
+#ifdef __BIGENDIAN
+ u8 ps:1;
+ u8 reserved1:1;
+ u8 page_code:6;
+#else
+ u8 page_code:6;
+ u8 reserved1:1;
+ u8 ps:1;
+#endif
+ u8 page_len;
+ u8 buf_full_ratio;
+ u8 buf_empty_ratio;
+
+ u8 bil_msb; /* bus inactivity limit -MSB */
+ u8 bil_lsb; /* bus inactivity limit -LSB */
+
+ u8 dtl_msb; /* disconnect time limit - MSB */
+ u8 dtl_lsb; /* disconnect time limit - LSB */
+
+ u8 ctl_msb; /* connect time limit - MSB */
+ u8 ctl_lsb; /* connect time limit - LSB */
+
+ u8 max_burst_len_msb;
+ u8 max_burst_len_lsb;
+#ifdef __BIGENDIAN
+ u8 emdp:1; /* enable modify data pointers */
+ u8 fa:3; /* fair arbitration */
+ u8 dimm:1; /* disconnect immediate */
+ u8 dtdc:3; /* data transfer disconnect control */
+#else
+ u8 dtdc:3; /* data transfer disconnect control */
+ u8 dimm:1; /* disconnect immediate */
+ u8 fa:3; /* fair arbitration */
+ u8 emdp:1; /* enable modify data pointers */
+#endif
+
+ u8 reserved3;
+
+ u8 first_burst_len_msb;
+ u8 first_burst_len_lsb;
+} scsi_mp_disc_recn_t;
+
+/*
+ * SCSI format device mode page
+ */
+typedef struct {
+#ifdef __BIGENDIAN
+ u32 ps:1;
+ u32 reserved1:1;
+ u32 page_code:6;
+#else
+ u32 page_code:6;
+ u32 reserved1:1;
+ u32 ps:1;
+#endif
+ u32 page_len:8;
+ u32 tracks_per_zone:16;
+
+ u32 a_sec_per_zone:16;
+ u32 a_tracks_per_zone:16;
+
+ u32 a_tracks_per_lun:16; /* alternate tracks/lun-MSB */
+ u32 sec_per_track:16; /* sectors/track-MSB */
+
+ u32 bytes_per_sector:16;
+ u32 interleave:16;
+
+ u32 tsf:16; /* track skew factor-MSB */
+ u32 csf:16; /* cylinder skew factor-MSB */
+
+#ifdef __BIGENDIAN
+ u32 ssec:1; /* soft sector formatting */
+ u32 hsec:1; /* hard sector formatting */
+ u32 rmb:1; /* removable media */
+ u32 surf:1; /* surface */
+ u32 reserved2:4;
+#else
+ u32 reserved2:4;
+ u32 surf:1; /* surface */
+ u32 rmb:1; /* removable media */
+ u32 hsec:1; /* hard sector formatting */
+ u32 ssec:1; /* soft sector formatting */
+#endif
+ u32 reserved3:24;
+} scsi_mp_format_device_t;
+
+/*
+ * SCSI rigid disk device geometry page
+ */
+typedef struct {
+#ifdef __BIGENDIAN
+ u32 ps:1;
+ u32 reserved1:1;
+ u32 page_code:6;
+#else
+ u32 page_code:6;
+ u32 reserved1:1;
+ u32 ps:1;
+#endif
+ u32 page_len:8;
+ u32 num_cylinders0:8;
+ u32 num_cylinders1:8;
+
+ u32 num_cylinders2:8;
+ u32 num_heads:8;
+ u32 scwp0:8;
+ u32 scwp1:8;
+
+ u32 scwp2:8;
+ u32 scrwc0:8;
+ u32 scrwc1:8;
+ u32 scrwc2:8;
+
+ u32 dsr:16;
+ u32 lscyl0:8;
+ u32 lscyl1:8;
+
+ u32 lscyl2:8;
+#ifdef __BIGENDIAN
+ u32 reserved2:6;
+ u32 rpl:2; /* rotational position locking */
+#else
+ u32 rpl:2; /* rotational position locking */
+ u32 reserved2:6;
+#endif
+ u32 rot_off:8;
+ u32 reserved3:8;
+
+ u32 med_rot_rate:16;
+ u32 reserved4:16;
+} scsi_mp_rigid_device_geometry_t;
+
+/*
+ * SCSI caching mode page
+ */
+typedef struct {
+#ifdef __BIGENDIAN
+ u8 ps:1;
+ u8 res1:1;
+ u8 page_code:6;
+#else
+ u8 page_code:6;
+ u8 res1:1;
+ u8 ps:1;
+#endif
+ u8 page_len;
+#ifdef __BIGENDIAN
+ u8 ic:1; /* initiator control */
+ u8 abpf:1; /* abort pre-fetch */
+ u8 cap:1; /* caching analysis permitted */
+ u8 disc:1; /* discontinuity */
+ u8 size:1; /* size enable */
+ u8 wce:1; /* write cache enable */
+ u8 mf:1; /* multiplication factor */
+ u8 rcd:1; /* read cache disable */
+
+ u8 drrp:4; /* demand read retention priority */
+ u8 wrp:4; /* write retention priority */
+#else
+ u8 rcd:1; /* read cache disable */
+ u8 mf:1; /* multiplication factor */
+ u8 wce:1; /* write cache enable */
+ u8 size:1; /* size enable */
+ u8 disc:1; /* discontinuity */
+ u8 cap:1; /* caching analysis permitted */
+ u8 abpf:1; /* abort pre-fetch */
+ u8 ic:1; /* initiator control */
+
+ u8 wrp:4; /* write retention priority */
+ u8 drrp:4; /* demand read retention priority */
+#endif
+ u8 dptl[2];/* disable pre-fetch transfer length */
+ u8 min_prefetch[2];
+ u8 max_prefetch[2];
+ u8 max_prefetch_limit[2];
+#ifdef __BIGENDIAN
+ u8 fsw:1; /* force sequential write */
+ u8 lbcss:1;/* logical block cache segment size */
+ u8 dra:1; /* disable read ahead */
+ u8 vs:2; /* vendor specific */
+ u8 res2:3;
+#else
+ u8 res2:3;
+ u8 vs:2; /* vendor specific */
+ u8 dra:1; /* disable read ahead */
+ u8 lbcss:1;/* logical block cache segment size */
+ u8 fsw:1; /* force sequential write */
+#endif
+ u8 num_cache_segs;
+
+ u8 cache_seg_size[2];
+ u8 res3;
+ u8 non_cache_seg_size[3];
+} scsi_mp_caching_t;
+
+/*
+ * SCSI control mode page
+ */
+typedef struct {
+#ifdef __BIGENDIAN
+u8 ps:1;
+u8 reserved1:1;
+u8 page_code:6;
+#else
+u8 page_code:6;
+u8 reserved1:1;
+u8 ps:1;
+#endif
+ u8 page_len;
+#ifdef __BIGENDIAN
+ u8 tst:3; /* task set type */
+ u8 reserved3:3;
+ u8 gltsd:1; /* global logging target save disable */
+ u8 rlec:1; /* report log exception condition */
+
+ u8 qalgo_mod:4; /* queue alogorithm modifier */
+ u8 reserved4:1;
+ u8 qerr:2; /* queue error management */
+ u8 dque:1; /* disable queuing */
+
+ u8 reserved5:1;
+ u8 rac:1; /* report a check */
+ u8 reserved6:2;
+ u8 swp:1; /* software write protect */
+ u8 raerp:1; /* ready AER permission */
+ u8 uaaerp:1; /* unit attenstion AER permission */
+ u8 eaerp:1; /* error AER permission */
+
+ u8 reserved7:5;
+ u8 autoload_mod:3;
+#else
+ u8 rlec:1; /* report log exception condition */
+ u8 gltsd:1; /* global logging target save disable */
+ u8 reserved3:3;
+ u8 tst:3; /* task set type */
+
+ u8 dque:1; /* disable queuing */
+ u8 qerr:2; /* queue error management */
+ u8 reserved4:1;
+ u8 qalgo_mod:4; /* queue alogorithm modifier */
+
+ u8 eaerp:1; /* error AER permission */
+ u8 uaaerp:1; /* unit attenstion AER permission */
+ u8 raerp:1; /* ready AER permission */
+ u8 swp:1; /* software write protect */
+ u8 reserved6:2;
+ u8 rac:1; /* report a check */
+ u8 reserved5:1;
+
+ u8 autoload_mod:3;
+ u8 reserved7:5;
+#endif
+ u8 rahp_msb; /* ready AER holdoff period - MSB */
+ u8 rahp_lsb; /* ready AER holdoff period - LSB */
+
+ u8 busy_timeout_period_msb;
+ u8 busy_timeout_period_lsb;
+
+ u8 ext_selftest_compl_time_msb;
+ u8 ext_selftest_compl_time_lsb;
+} scsi_mp_control_page_t;
+
+/*
+ * SCSI medium types supported mode page
+ */
+typedef struct {
+#ifdef __BIGENDIAN
+ u8 ps:1;
+ u8 reserved1:1;
+ u8 page_code:6;
+#else
+ u8 page_code:6;
+ u8 reserved1:1;
+ u8 ps:1;
+#endif
+ u8 page_len;
+
+ u8 reserved3[2];
+ u8 med_type1_sup; /* medium type one supported */
+ u8 med_type2_sup; /* medium type two supported */
+ u8 med_type3_sup; /* medium type three supported */
+ u8 med_type4_sup; /* medium type four supported */
+} scsi_mp_medium_types_sup_t;
+
+/*
+ * SCSI informational exception control mode page
+ */
+typedef struct {
+#ifdef __BIGENDIAN
+ u8 ps:1;
+ u8 reserved1:1;
+ u8 page_code:6;
+#else
+ u8 page_code:6;
+ u8 reserved1:1;
+ u8 ps:1;
+#endif
+ u8 page_len;
+#ifdef __BIGENDIAN
+ u8 perf:1; /* performance */
+ u8 reserved3:1;
+ u8 ebf:1; /* enable background fucntion */
+ u8 ewasc:1; /* enable warning */
+ u8 dexcpt:1; /* disable exception control */
+ u8 test:1; /* enable test device failure
+ * notification
+ */
+ u8 reserved4:1;
+ u8 log_error:1;
+
+ u8 reserved5:4;
+ u8 mrie:4; /* method of reporting info
+ * exceptions
+ */
+#else
+ u8 log_error:1;
+ u8 reserved4:1;
+ u8 test:1; /* enable test device failure
+ * notification
+ */
+ u8 dexcpt:1; /* disable exception control */
+ u8 ewasc:1; /* enable warning */
+ u8 ebf:1; /* enable background fucntion */
+ u8 reserved3:1;
+ u8 perf:1; /* performance */
+
+ u8 mrie:4; /* method of reporting info
+ * exceptions
+ */
+ u8 reserved5:4;
+#endif
+ u8 interval_timer_msb;
+ u8 interval_timer_lsb;
+
+ u8 report_count_msb;
+ u8 report_count_lsb;
+} scsi_mp_info_excpt_cntl_t;
+
+/*
+ * Methods of reporting informational exceptions
+ */
+#define SCSI_MP_IEC_NO_REPORT 0x0 /* no reporting of exceptions */
+#define SCSI_MP_IEC_AER 0x1 /* async event reporting */
+#define SCSI_MP_IEC_UNIT_ATTN 0x2 /* generate unit attenstion */
+#define SCSI_MO_IEC_COND_REC_ERR 0x3 /* conditionally generate recovered
+ * error
+ */
+#define SCSI_MP_IEC_UNCOND_REC_ERR 0x4 /* unconditionally generate recovered
+ * error
+ */
+#define SCSI_MP_IEC_NO_SENSE 0x5 /* generate no sense */
+#define SCSI_MP_IEC_ON_REQUEST 0x6 /* only report exceptions on request */
+
+/*
+ * SCSI flexible disk page
+ */
+typedef struct {
+#ifdef __BIGENDIAN
+ u8 ps:1;
+ u8 reserved1:1;
+ u8 page_code:6;
+#else
+ u8 page_code:6;
+ u8 reserved1:1;
+ u8 ps:1;
+#endif
+ u8 page_len;
+
+ u8 transfer_rate_msb;
+ u8 transfer_rate_lsb;
+
+ u8 num_heads;
+ u8 num_sectors;
+
+ u8 bytes_per_sector_msb;
+ u8 bytes_per_sector_lsb;
+
+ u8 num_cylinders_msb;
+ u8 num_cylinders_lsb;
+
+ u8 sc_wpc_msb; /* starting cylinder-write
+ * precompensation msb
+ */
+ u8 sc_wpc_lsb; /* starting cylinder-write
+ * precompensation lsb
+ */
+ u8 sc_rwc_msb; /* starting cylinder-reduced write
+ * current msb
+ */
+ u8 sc_rwc_lsb; /* starting cylinder-reduced write
+ * current lsb
+ */
+
+ u8 dev_step_rate_msb;
+ u8 dev_step_rate_lsb;
+
+ u8 dev_step_pulse_width;
+
+ u8 head_sd_msb; /* head settle delay msb */
+ u8 head_sd_lsb; /* head settle delay lsb */
+
+ u8 motor_on_delay;
+ u8 motor_off_delay;
+#ifdef __BIGENDIAN
+ u8 trdy:1; /* true ready bit */
+ u8 ssn:1; /* start sector number bit */
+ u8 mo:1; /* motor on bit */
+ u8 reserved3:5;
+
+ u8 reserved4:4;
+ u8 spc:4; /* step pulse per cylinder */
+#else
+ u8 reserved3:5;
+ u8 mo:1; /* motor on bit */
+ u8 ssn:1; /* start sector number bit */
+ u8 trdy:1; /* true ready bit */
+
+ u8 spc:4; /* step pulse per cylinder */
+ u8 reserved4:4;
+#endif
+ u8 write_comp;
+ u8 head_load_delay;
+ u8 head_unload_delay;
+#ifdef __BIGENDIAN
+ u8 pin34:4; /* pin34 usage */
+ u8 pin2:4; /* pin2 usage */
+
+ u8 pin4:4; /* pin4 usage */
+ u8 pin1:4; /* pin1 usage */
+#else
+ u8 pin2:4; /* pin2 usage */
+ u8 pin34:4; /* pin34 usage */
+
+ u8 pin1:4; /* pin1 usage */
+ u8 pin4:4; /* pin4 usage */
+#endif
+ u8 med_rot_rate_msb;
+ u8 med_rot_rate_lsb;
+
+ u8 reserved5[2];
+} scsi_mp_flexible_disk_t;
+
+typedef struct {
+ scsi_mode_param_header6_t mph; /* mode page header */
+ scsi_mode_param_desc_t desc; /* block descriptor */
+ scsi_mp_format_device_t format; /* format device data */
+} scsi_mode_page_format_data6_t;
+
+typedef struct {
+ scsi_mode_param_header10_t mph; /* mode page header */
+ scsi_mode_param_desc_t desc; /* block descriptor */
+ scsi_mp_format_device_t format; /* format device data */
+} scsi_mode_page_format_data10_t;
+
+typedef struct {
+ scsi_mode_param_header6_t mph; /* mode page header */
+ scsi_mode_param_desc_t desc; /* block descriptor */
+ scsi_mp_rigid_device_geometry_t rdg;
+ /* rigid geometry data */
+} scsi_mode_page_rdg_data6_t;
+
+typedef struct {
+ scsi_mode_param_header10_t mph; /* mode page header */
+ scsi_mode_param_desc_t desc; /* block descriptor */
+ scsi_mp_rigid_device_geometry_t rdg;
+ /* rigid geometry data */
+} scsi_mode_page_rdg_data10_t;
+
+typedef struct {
+ scsi_mode_param_header6_t mph; /* mode page header */
+ scsi_mode_param_desc_t desc; /* block descriptor */
+ scsi_mp_caching_t cache; /* cache page data */
+} scsi_mode_page_cache6_t;
+
+typedef struct {
+ scsi_mode_param_header10_t mph; /* mode page header */
+ scsi_mode_param_desc_t desc; /* block descriptor */
+ scsi_mp_caching_t cache; /* cache page data */
+} scsi_mode_page_cache10_t;
+
+/* --------------------------------------------------------------
+ * Format Unit command
+ * ------------------------------------------------------------
+ */
+
+/*
+ * Format Unit CDB
+ */
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 res1:3;
+ u8 fmtdata:1; /* if set, data out phase has format
+ * data
+ */
+ u8 cmplst:1; /* if set, defect list is complete */
+ u8 def_list:3; /* format of defect descriptor is
+ * fmtdata =1
+ */
+#else
+ u8 def_list:3; /* format of defect descriptor is
+ * fmtdata = 1
+ */
+ u8 cmplst:1; /* if set, defect list is complete */
+ u8 fmtdata:1; /* if set, data out phase has format
+ * data
+ */
+ u8 res1:3;
+#endif
+ u8 interleave_msb;
+ u8 interleave_lsb;
+ u8 vendor_spec;
+ u8 control;
+} scsi_format_unit_t;
+
+/*
+ * h
+ */
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved:3;
+ u8 obsolete:4;
+ u8 extent:1;
+#else
+ u8 extent:1;
+ u8 obsolete:4;
+ u8 reserved:3;
+#endif
+ u8 reservation_id;
+ u16 param_list_len;
+ u8 control;
+} scsi_reserve6_t;
+
+/*
+ * h
+ */
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:3;
+ u8 obsolete:4;
+ u8 extent:1;
+#else
+ u8 extent:1;
+ u8 obsolete:4;
+ u8 reserved1:3;
+#endif
+ u8 reservation_id;
+ u16 reserved2;
+ u8 control;
+} scsi_release6_t;
+
+/*
+ * h
+ */
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:3;
+ u8 third_party:1;
+ u8 reserved2:2;
+ u8 long_id:1;
+ u8 extent:1;
+#else
+ u8 extent:1;
+ u8 long_id:1;
+ u8 reserved2:2;
+ u8 third_party:1;
+ u8 reserved1:3;
+#endif
+ u8 reservation_id;
+ u8 third_pty_dev_id;
+ u8 reserved3;
+ u8 reserved4;
+ u8 reserved5;
+ u16 param_list_len;
+ u8 control;
+} scsi_reserve10_t;
+
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:3;
+ u8 third_party:1;
+ u8 reserved2:2;
+ u8 long_id:1;
+ u8 extent:1;
+#else
+ u8 extent:1;
+ u8 long_id:1;
+ u8 reserved2:2;
+ u8 third_party:1;
+ u8 reserved1:3;
+#endif
+ u8 reservation_id;
+ u8 third_pty_dev_id;
+ u8 reserved3;
+ u8 reserved4;
+ u8 reserved5;
+ u16 param_list_len;
+ u8 control;
+} scsi_release10_t;
+
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 lun:3;
+ u8 dpo:1;
+ u8 reserved:2;
+ u8 bytchk:1;
+ u8 reladdr:1;
+#else
+ u8 reladdr:1;
+ u8 bytchk:1;
+ u8 reserved:2;
+ u8 dpo:1;
+ u8 lun:3;
+#endif
+ u8 lba0;
+ u8 lba1;
+ u8 lba2;
+ u8 lba3;
+ u8 reserved1;
+ u8 verification_len0;
+ u8 verification_len1;
+ u8 control_byte;
+} scsi_verify10_t;
+
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 lun:3;
+ u8 reserved:5;
+#else
+ u8 reserved:5;
+ u8 lun:3;
+#endif
+ u8 reserved0;
+ u8 reserved1;
+ u8 alloc_len;
+ u8 control_byte;
+} scsi_request_sense_t;
+
+/* ------------------------------------------------------------
+ * SCSI status byte values
+ * ------------------------------------------------------------
+ */
+#define SCSI_STATUS_GOOD 0x00
+#define SCSI_STATUS_CHECK_CONDITION 0x02
+#define SCSI_STATUS_CONDITION_MET 0x04
+#define SCSI_STATUS_BUSY 0x08
+#define SCSI_STATUS_INTERMEDIATE 0x10
+#define SCSI_STATUS_ICM 0x14 /* intermediate condition met */
+#define SCSI_STATUS_RESERVATION_CONFLICT 0x18
+#define SCSI_STATUS_COMMAND_TERMINATED 0x22
+#define SCSI_STATUS_QUEUE_FULL 0x28
+#define SCSI_STATUS_ACA_ACTIVE 0x30
+
+#define SCSI_MAX_ALLOC_LEN 0xFF /* maximum allocarion length
+ * in CDBs
+ */
+
+#define SCSI_OP_WRITE_VERIFY10 0x2E
+#define SCSI_OP_WRITE_VERIFY12 0xAE
+#define SCSI_OP_UNDEF 0xFF
+
+/*
+ * SCSI WRITE-VERIFY(10) command
+ */
+typedef struct {
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:3;
+ u8 dpo:1; /* Disable Page Out */
+ u8 reserved2:1;
+ u8 ebp:1; /* erse by-pass */
+ u8 bytchk:1; /* byte check */
+ u8 rel_adr:1; /* relative address */
+#else
+ u8 rel_adr:1; /* relative address */
+ u8 bytchk:1; /* byte check */
+ u8 ebp:1; /* erse by-pass */
+ u8 reserved2:1;
+ u8 dpo:1; /* Disable Page Out */
+ u8 reserved1:3;
+#endif
+ u8 lba0; /* logical block address - MSB */
+ u8 lba1;
+ u8 lba2;
+ u8 lba3; /* LSB */
+ u8 reserved3;
+ u8 xfer_length0; /* transfer length in blocks - MSB */
+ u8 xfer_length1; /* LSB */
+ u8 control;
+} scsi_write_verify10_t;
+
+#pragma pack()
+
+#endif /* __SCSI_H__ */
diff -urpN orig/drivers/scsi/bfa/include/protocol/sfp.h patch/drivers/scsi/bfa/include/protocol/sfp.h
--- orig/drivers/scsi/bfa/include/protocol/sfp.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/protocol/sfp.h 2009-03-14 11:44:58.123279000 -0700
@@ -0,0 +1,467 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __SFP_H__
+#define __SFP_H__
+
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+#define SFP_SERIAL_ID_ADDR 0xA0
+#define SFP_DIGI_DIAG_ADDR 0xA2
+#define SFP_DEV_CHG_ADDR 0x04
+
+/*
+ * Address for Small Form-factor Pluggable (SFP) Transceiver.
+ */
+#define SFP_ID 00
+#define SFP_ID_EXT 01
+#define SFP_CONNECTOR 02
+#define SFP_TX 03
+#define SFP_TX_1 07
+#define SFP_ENCODING 11
+#define SFP_BR_NORM 12
+#define SFP_LENGTH_KM 14
+#define SFP_LENGTH_9M 15
+#define SFP_LENGTH_50M 16
+#define SFP_LENGTH_62_5M 17
+#define SFP_LENGTH_COPPER 18
+#define SFP_VENDOR_NAME 20
+#define SFP_VENDOR_NAME_1 24
+#define SFP_VENDOR_NAME_2 28
+#define SFP_VENDOR_NAME_3 32
+#define SFP_VENDOR_OUI 37
+#define SFP_VENDOR_PN 40
+#define SFP_VENDOR_PN_1 44
+#define SFP_VENDOR_PN_2 48
+#define SFP_VENDOR_PN_3 52
+#define SFP_VENDOR_REV 56
+#define SFP_CC_BASE 63
+#define SFP_OPTIONS 64
+#define SFP_BR_MAX 66
+#define SFP_BR_MIN 67
+#define SFP_VENDOR_SN 68
+#define SFP_VENDOR_SN_1 72
+#define SFP_VENDOR_SN_2 76
+#define SFP_VENDOR_SN_3 80
+#define SFP_DATE_CODE 84
+#define SFP_DATE_CODE_1 88
+#define SFP_DIAG_MON_TYPE 92
+#define SFP_ENH_OPT 93
+#define SFP_SFF8472_COMP 94
+#define SFP_CC_EXT 95
+
+/*
+ * SFF-8472
+ * Diagnostics: Data Fields - Address A2h
+ */
+#define SFP_THRESHOLD_START 00
+#define SFP_TEMP_HIGH_ALARM 00
+#define SFP_TEMP_LOW_ALARM 02
+#define SFP_TEMP_HIGH_WARN 04
+#define SFP_TEMP_LOW_WARN 06
+#define SFP_VOL_HIGH_ALARM 08
+#define SFP_VOL_LOW_ALARM 10
+#define SFP_VOL_HIGH_WARN 12
+#define SFP_VOL_LOW_WARM 14
+#define SFP_BIAS_HIGH_ALARM 16
+#define SFP_BIAS_LOW_ALARM 18
+#define SFP_BIAS_HIGH_WARN 20
+#define SFP_BIAS_LOW_WARN 22
+#define SFP_TX_PWR_HIGH_ALARM 24
+#define SFP_TX_PWR_LOW_ALARM 26
+#define SFP_TX_PWR_HIGH_WARN 28
+#define SFP_TX_PWR_LOW_WARN 30
+#define SFP_RX_PWR_HIGH_ALARM 32
+#define SFP_RX_PWR_LOW_ALARM 34
+#define SFP_RX_PWR_HIGH_WARN 36
+#define SFP_RX_PWR_LOW_WARN 38
+#define SFP_THRESHOLD_END 40
+
+#define XFP_AUX1_HIGH_ALARM 42
+#define XFP_AUX1_LOW_ALARM 44
+#define XFP_AUX1_HIGH_WARN 46
+#define XFP_AUX1_LOW_WARN 48
+#define XFP_AUX2_HIGH_ALARM 50
+#define XFP_AUX2_LOW_ALARM 52
+#define XFP_AUX2_HIGH_WARN 54
+#define XFP_AUX2_LOW_WARN 56
+
+#define SFP_RX_PWR_4 56
+#define SFP_RX_PWR_3 60
+#define SFP_RX_PWR_2 64
+#define SFP_RX_PWR_1 68
+#define SFP_RX_PWR_0 72
+#define SFP_TX_I_SLOPE 76
+#define SFP_TX_I_OFFSET 78
+#define SFP_TX_I_PWR_SLOPE 80
+#define SFP_TX_I_PWR_OFFSET 82
+#define SFP_T_SLOPE 84
+#define SFP_T_OFFSET 86
+#define SFP_V_SLOPE 84
+#define SFP_V_OFFSET 86
+#define SFP_CHECKSUM 95
+
+#define SFP_TEMP_MSB 96
+#define SFP_TEMP_LSB 97
+#define SFP_VCC_MSB 98
+#define SFP_VCC_LSB 99
+#define SFP_TX_BIAS_MSB 100
+#define SFP_TX_BIAS_LSB 101
+#define SFP_TX_PWR_MSB 102
+#define SFP_TX_PWR_LSB 103
+#define SFP_RX_PWR_MSB 104
+#define SFP_RX_PWR_LSB 105
+#define XFP_AUX1_MSB 106
+#define XFP_AUX1_LSB 107
+#define XFP_AUX2_MSB 108
+#define XFP_AUX2_LSB 109
+#define SFP_OPTIONAL_CSR 110
+#define SFP_OPTIONAL_ALARM_1 112
+#define SFP_OPTIONAL_ALARM_2 113
+#define SFP_OPTIONAL_WARN_1 116
+#define SFP_OPTIONAL_WARN_2 117
+
+#define SFP_DMT_DIGIDIAGMON 0x40
+#define SFP_EOPTION_AWFLAGS 0x80
+#define SFP_DIAGMON_SIZE 10 /* no of bytes of diag monitor data */
+#define SFP_DIAGMON_AWFLAGS_MSK 0xFFC0
+
+/*
+ * Serial ID: Data Fields -- Address A0h
+ * Basic ID field total 64 bytes
+ */
+typedef struct {
+ u8 id; /* 00: Identifier */
+ u8 extid; /* 01: Extended Identifier */
+ u8 connector; /* 02: Connector */
+ u8 xcvr[8]; /* 03-10: Transceiver */
+ u8 encoding; /* 11: Encoding */
+ u8 br_norm; /* 12: BR, Nominal */
+ u8 rate_id; /* 13: Rate Identifier */
+ u8 len_km; /* 14: Length single mode km */
+ u8 len_100m; /* 15: Length single mode 100m */
+ u8 len_om2; /* 16: Length om2 fiber 10m */
+ u8 len_om1; /* 17: Length om1 fiber 10m */
+ u8 len_cu; /* 18: Length copper 1m */
+ u8 len_om3; /* 19: Length om3 fiber 10m */
+ u8 vendor_name[16];/* 20-35 */
+ u8 unalloc1;
+ u8 vendor_oui[3]; /* 37-39 */
+ u8 vendor_pn[16]; /* 40-55 */
+ u8 vendor_rev[4]; /* 56-59 */
+ u8 wavelen[2]; /* 60-61 */
+ u8 unalloc2;
+ u8 cc_base; /* 63: check code for base id field */
+} sfp_srlid_base_t;
+
+/*
+ * Serial ID: Data Fields -- Address A0h
+ * Extended id field total 32 bytes
+ */
+typedef struct {
+ u8 options[2];
+ u8 br_max;
+ u8 br_min;
+ u8 vendor_sn[16];
+ u8 date_code[8];
+ u8 diag_mon_type; /* 92: Diagnostic Monitoring type */
+ u8 en_options;
+ u8 sff_8472;
+ u8 cc_ext;
+} sfp_srlid_ext_t;
+
+/*
+ * Diagnostic: Data Fields -- Address A2h
+ * Diagnostic and control/status base field total 96 bytes
+ */
+typedef struct {
+ /*
+ * Alarm and warning Thresholds 40 bytes
+ */
+ u8 temp_high_alarm[2]; /* 00-01 */
+ u8 temp_low_alarm[2]; /* 02-03 */
+ u8 temp_high_warning[2]; /* 04-05 */
+ u8 temp_low_warning[2]; /* 06-07 */
+
+ u8 volt_high_alarm[2]; /* 08-09 */
+ u8 volt_low_alarm[2]; /* 10-11 */
+ u8 volt_high_warning[2]; /* 12-13 */
+ u8 volt_low_warning[2]; /* 14-15 */
+
+ u8 bias_high_alarm[2]; /* 16-17 */
+ u8 bias_low_alarm[2]; /* 18-19 */
+ u8 bias_high_warning[2]; /* 20-21 */
+ u8 bias_low_warning[2]; /* 22-23 */
+
+ u8 tx_pwr_high_alarm[2]; /* 24-25 */
+ u8 tx_pwr_low_alarm[2]; /* 26-27 */
+ u8 tx_pwr_high_warning[2]; /* 28-29 */
+ u8 tx_pwr_low_warning[2]; /* 30-31 */
+
+ u8 rx_pwr_high_alarm[2]; /* 32-33 */
+ u8 rx_pwr_low_alarm[2]; /* 34-35 */
+ u8 rx_pwr_high_warning[2]; /* 36-37 */
+ u8 rx_pwr_low_warning[2]; /* 38-39 */
+
+ u8 unallocate_1[16];
+
+ /*
+ * ext_cal_const[36]
+ */
+
+ u8 rx_pwr[20];
+ u8 tx_i[4];
+ u8 tx_pwr[4];
+ u8 temp[4];
+ u8 volt[4];
+ u8 unallocate_2[3];
+ u8 cc_dmi;
+} sfp_diag_base_t;
+
+/*
+ * Diagnostic: Data Fields -- Address A2h
+ * Diagnostic and control/status extended field total 24 bytes
+ */
+typedef struct {
+ u8 diag[SFP_DIAGMON_SIZE];
+ u8 unalloc1[4];
+ u8 status_ctl;
+ u8 rsvd;
+ u8 alarm_flags[2];
+ u8 unalloc2[2];
+ u8 warning_flags[2];
+ u8 ext_status_ctl[2];
+} sfp_diag_ext_t;
+
+typedef struct {
+ sfp_srlid_base_t srlid_base;
+ sfp_srlid_ext_t srlid_ext;
+ sfp_diag_base_t diag_base;
+ sfp_diag_ext_t diag_ext;
+} sfp_mem_t;
+
+/*
+ * Alarm and Warning Flag Bits (SFF-8472 Rev 10.2 Table 3.18)
+ */
+typedef union {
+ u8 b;
+ struct {
+ u8 temp_hi:1; /* temperature exceed high threshold */
+ u8 temp_lo:1; /* temperature below low threshold */
+ u8 volt_hi:1; /* supply voltage exceed high threshold */
+ u8 volt_lo:1; /* supply voltage below low threshold */
+ u8 tx_i_hi:1; /* TX Bias current exceed high threshold */
+ u8 tx_i_lo:1; /* TX Bias current below low threshold */
+ u8 tx_pwr_hi:1; /* TX output power exceed high threshold */
+ u8 tx_pwr_lo:1; /* TX output power below low threshold */
+ } r;
+} sfp_awf_lsb_t;
+
+typedef union {
+ u8 b;
+ struct {
+ u8 rx_pwr_hi:1; /* RX output power exceed high threshold */
+ u8 rx_pwr_lo:1; /* RX output power below low threshold */
+ u8 rsvd:6;
+ } r;
+} sfp_awf_msb_t;
+
+/*
+ * transceiver codes (SFF-8472 Rev 10.2 Table 3.5)
+ */
+typedef union {
+ u8 b;
+ struct {
+ u8 e10g_comp:4; /* 10G Ethernet compliance */
+ u8 ib_comp:4; /* Infiniband compliance */
+ } r;
+} sfp_xcvr_e10g_code_t;
+
+typedef union {
+ u8 b;
+ struct {
+ u8 escon:2; /* ESCON compliance code */
+ u8 oc192_reach:1; /* SONET compliance code */
+ u8 so_reach:2;
+ u8 oc48_reach:3;
+ } r;
+} sfp_xcvr_so1_code_t;
+
+typedef union {
+ u8 b;
+ struct {
+ u8 reserved:1;
+ u8 oc12_reach:3; /* OC12 reach */
+ u8 reserved1:1;
+ u8 oc3_reach:3; /* OC3 reach */
+ } r;
+} sfp_xcvr_so2_code_t;
+
+typedef union {
+ u8 b;
+ struct {
+ u8 base_px:1;
+ u8 base_bx10:1;
+ u8 e100base_fx:1;
+ u8 e100base_lx:1;
+ u8 e1000base_t:1;
+ u8 e1000base_cx:1;
+ u8 e1000base_lx:1;
+ u8 e1000base_sx:1;
+ } r;
+} sfp_xcvr_eth_code_t;
+
+typedef struct {
+ u8 link_len:5; /* FC link length */
+ u8 xmtr_tech2:3;
+ u8 xmtr_tech1:7; /* FC transmitter technology */
+ u8 reserved1:1;
+} sfp_xcvr_fc1_code_t;
+
+/*
+ * values for link_len above
+ */
+enum {
+ SFP_FC_LINKLEN_M = (1 << 0), /* Medium distance */
+ SFP_FC_LINKLEN_L = (1 << 1), /* long distance */
+ SFP_FC_LINKLEN_I = (1 << 2), /* intermediate distance */
+ SFP_FC_LINKLEN_S = (1 << 3), /* short distance */
+ SFP_FC_LINKLEN_V = (1 << 4) /* very long distance */
+};
+
+/*
+ * values for xmtr_tech above
+ */
+enum {
+ SFP_XMTR_TECH_CU = (1 << 0), /* copper FC-BaseT */
+ SFP_XMTR_TECH_CP = (1 << 1), /* copper passive */
+ SFP_XMTR_TECH_CA = (1 << 2), /* copper active */
+ SFP_XMTR_TECH_LL = (1 << 3), /* longwave laser */
+ SFP_XMTR_TECH_SL = (1 << 4), /* shortwave laser w/ OFC */
+ SFP_XMTR_TECH_SN = (1 << 5), /* shortwave laser w/o OFC */
+ SFP_XMTR_TECH_EL_INTRA = (1 << 6),
+ /* elec intra-enclosure */
+ SFP_XMTR_TECH_EL_INTER = (1 << 7),
+ /* elec inter-enclosure */
+ SFP_XMTR_TECH_LC = (1 << 8), /* longwave laser */
+ SFP_XMTR_TECH_SA = (1 << 9)
+};
+
+typedef union {
+ u8 b;
+ struct {
+ u8 tw_media:1; /* twin axial pair (tw) */
+ u8 tp_media:1; /* shielded twisted pair (sp) */
+ u8 mi_media:1; /* miniature coax (mi) */
+ u8 tv_media:1; /* video coax (tv) */
+ u8 m6_media:1; /* multimode, 62.5m (m6) */
+ u8 m5_media:1; /* multimode, 50m (m5) */
+ u8 reserved:1;
+ u8 sm_media:1; /* single mode (sm) */
+ } r;
+} sfp_xcvr_fc2_code_t;
+
+typedef union {
+ u8 b;
+ struct {
+ u8 rsv4:1;
+ u8 mb800:1; /* 800 Mbytes/sec */
+ u8 rsv3:1;
+ u8 mb400:1; /* 400 Mbytes/sec */
+ u8 rsv2:1;
+ u8 mb200:1; /* 200 Mbytes/sec */
+ u8 rsv1:1;
+ u8 mb100:1; /* 100 Mbytes/sec */
+ } r;
+} sfp_xcvr_fc3_code_t;
+
+typedef union {
+ u8 b;
+ struct {
+ u8 gbase10_sr:1; /* 400 Mbytes/sec */
+ u8 gbase10_lr:1;
+ u8 gbase10_er:1;
+ u8 reserved1:1;
+ u8 gbase10_sw:1;
+ u8 gbase10_lw:1;
+ u8 gbase10_ew:1;
+ u8 reserved2:1;
+ } r;
+} sfp_xcvr_10g_eth_code_t;
+
+typedef union {
+ u8 b;
+ struct {
+ u8 mx_sn_i_1200:1; /* 1200-MX-SN-I compliance */
+ u8 sm_ll_l_1200:1; /* 1200-SM-LL-L compliance */
+ u8 er_1550:1; /* Extended reach 1550 nm */
+ u8 ir_1300:1; /* Intermediate reach 1300 nm
+ * FP
+ */
+ u8 reserved:4;
+ } r;
+} sfp_xcvr_10g_fc_code_t;
+
+typedef union {
+ u8 b;
+ struct {
+ u8 xmtr_tech:4;
+ u8 wave_len_ctrl:1;
+ u8 tec:1;
+ u8 detector_type:1;
+ u8 tunable:1;
+ } r;
+} xfp_xcvr_xmtr_tech_t;
+
+typedef struct {
+ sfp_xcvr_e10g_code_t e10g;
+ sfp_xcvr_so1_code_t so1;
+ sfp_xcvr_so2_code_t so2;
+ sfp_xcvr_eth_code_t eth;
+ sfp_xcvr_fc1_code_t fc1;
+ sfp_xcvr_fc2_code_t fc2;
+ sfp_xcvr_fc3_code_t fc3;
+} sfp_xcvr_t;
+
+/*
+ * Diagnostic Monitoring Type.
+ */
+typedef union {
+ u8 b;
+ struct {
+ u8 legacy_rev:1; /* Reserved. */
+ u8 diag_mon:1; /* Diagnostic monitoring
+ * implemented
+ */
+ u8 int_calib:1; /* Internally calibrated */
+ u8 ext_calib:1; /* Externally calibrated */
+ u8 recv_pwr:1; /* Received power measurement
+ * type
+ */
+ u8 addr_mode:1; /* Addressing mode */
+ u8 reserved:2; /* Reserved */
+ } r;
+} sfp_diag_mon_type_t;
+
+#define SFP_CU_PIGTAIL 0x21 /* Copper pigtail connector */
+#define SFP_LC 0x07 /* SFP LC connector */
+
+#pragma pack()
+
+#endif /* __SFP_H__ */
diff -urpN orig/drivers/scsi/bfa/include/protocol/types.h patch/drivers/scsi/bfa/include/protocol/types.h
--- orig/drivers/scsi/bfa/include/protocol/types.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/protocol/types.h 2009-03-14 11:44:58.099034000 -0700
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * http://www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * types.h Protocol defined base types
+ */
+
+#ifndef __TYPES_H__
+#define __TYPES_H__
+
+#include <bfa_os_inc.h>
+
+typedef u64 wwn_t;
+typedef u64 lun_t;
+
+#define WWN_NULL (0)
+#define FC_SYMNAME_MAX 256 /* max name server symbolic name size */
+#define FC_ALPA_MAX 128
+
+#pragma pack(1)
+
+#define MAC_ADDRLEN (6)
+typedef struct mac_s { u8 mac[MAC_ADDRLEN]; } mac_t;
+
+#pragma pack()
+
+#endif