From: Jing Huang <[email protected]>
This patch contains Makefile and Kconfig file for scsi and bfa. It is created
using 2.6.29-rc8 kernel.
Signed-off-by: Jing Huang <[email protected]>
---
Kconfig | 9 +++++++++
Makefile | 1 +
bfa/Makefile | 28 ++++++++++++++++++++++++++++
3 files changed, 38 insertions(+)
diff -urpN orig/drivers/scsi/bfa/Makefile patch/drivers/scsi/bfa/Makefile
--- orig/drivers/scsi/bfa/Makefile 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/Makefile 2009-03-14 11:44:59.337712000 -0700
@@ -0,0 +1,28 @@
+#
+# Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+# All rights reserved
+# http://www.brocade.com
+#
+# Linux driver for Brocade Fibre Channel Host Bus Adapter.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License (GPL) Version 2 as
+# published by the Free Software Foundation
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+obj-$(CONFIG_SCSI_BFA_FC) := bfa.o
+
+bfa-objs := bfad.o bfad_intr.o bfad_os.o bfad_im.o bfad_attr.o bfad_fwimg.o \
+ bfa_core.o bfa_ioc.o bfa_iocfc.o bfa_fcxp.o bfa_diag.o \
+ bfa_fcdiag.o bfa_lps.o bfa_hw_cb.o bfa_hw_ct.o bfa_drv.o \
+ bfa_intr.o bfa_timer.o bfa_rport.o bfa_port.o bfa_uf.o \
+ bfa_sgpg.o bfa_module.o bfa_ioim.o bfa_itnim.o bfa_fcpim.o \
+ bfa_tskim.o bfa_port.o bfa_vport.o bfa_lport.o bfa_fabric.o \
+ bfa_auth.o bfa_vfapi.o bfa_log.o bfa_log_module.o bfa_csdebug.o \
+ bfa_sm.o plog.o
+
+EXTRA_CFLAGS += -I$(obj) -I$(obj)/include
diff -urpN orig/drivers/scsi/Kconfig patch/drivers/scsi/Kconfig
--- orig/drivers/scsi/Kconfig 2009-03-14 11:44:59.381081000 -0700
+++ patch/drivers/scsi/Kconfig 2009-03-14 11:44:53.382314000 -0700
@@ -1797,6 +1797,15 @@ config SCSI_SRP
To compile this driver as a module, choose M here: the
module will be called libsrp.
+config SCSI_BFA_FC
+ tristate "Brocade BFA Fibre Channel Support"
+ depends on PCI && SCSI
+ help
+ This bfa driver supports all Brocade PCIe Fibre Channel host adapters.
+
+ To compile this driver as a module, choose M here. The module will
+ be called bfa.
+
endif # SCSI_LOWLEVEL
source "drivers/scsi/pcmcia/Kconfig"
diff -urpN orig/drivers/scsi/Makefile patch/drivers/scsi/Makefile
--- orig/drivers/scsi/Makefile 2009-03-14 11:44:59.393920000 -0700
+++ patch/drivers/scsi/Makefile 2009-03-14 11:44:53.417722000 -0700
@@ -84,6 +84,7 @@ obj-$(CONFIG_SCSI_QLOGIC_1280) += qla128
obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/
obj-$(CONFIG_SCSI_QLA_ISCSI) += qla4xxx/
obj-$(CONFIG_SCSI_LPFC) += lpfc/
+obj-$(CONFIG_SCSI_BFA_FC) += bfa/
obj-$(CONFIG_SCSI_PAS16) += pas16.o
obj-$(CONFIG_SCSI_T128) += t128.o
obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o
On Sat, Mar 14, 2009 at 12:58:41PM -0700, Jing Huang wrote:
> From: Jing Huang <[email protected]>
>
> This patch contains Makefile and Kconfig file for scsi and bfa. It is created
> using 2.6.29-rc8 kernel.
>
> Signed-off-by: Jing Huang <[email protected]>
> ---
> Kconfig | 9 +++++++++
> Makefile | 1 +
> bfa/Makefile | 28 ++++++++++++++++++++++++++++
> 3 files changed, 38 insertions(+)
>
> diff -urpN orig/drivers/scsi/bfa/Makefile patch/drivers/scsi/bfa/Makefile
> --- orig/drivers/scsi/bfa/Makefile 1969-12-31 16:00:00.000000000 -0800
> +++ patch/drivers/scsi/bfa/Makefile 2009-03-14 11:44:59.337712000 -0700
> @@ -0,0 +1,28 @@
> +#
> +# Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
> +# All rights reserved
> +# http://www.brocade.com
> +#
> +# Linux driver for Brocade Fibre Channel Host Bus Adapter.
> +#
> +# This program is free software; you can redistribute it and/or modify it
> +# under the terms of the GNU General Public License (GPL) Version 2 as
> +# published by the Free Software Foundation
> +#
> +# This program is distributed in the hope that it will be useful, but
> +# WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> +# General Public License for more details.
> +#
No one else needs this boiler plate - please remove it.
> +obj-$(CONFIG_SCSI_BFA_FC) := bfa.o
OK
> +
> +bfa-objs := bfad.o bfad_intr.o bfad_os.o bfad_im.o bfad_attr.o bfad_fwimg.o \
> + bfa_core.o bfa_ioc.o bfa_iocfc.o bfa_fcxp.o bfa_diag.o \
> + bfa_fcdiag.o bfa_lps.o bfa_hw_cb.o bfa_hw_ct.o bfa_drv.o \
> + bfa_intr.o bfa_timer.o bfa_rport.o bfa_port.o bfa_uf.o \
> + bfa_sgpg.o bfa_module.o bfa_ioim.o bfa_itnim.o bfa_fcpim.o \
> + bfa_tskim.o bfa_port.o bfa_vport.o bfa_lport.o bfa_fabric.o \
> + bfa_auth.o bfa_vfapi.o bfa_log.o bfa_log_module.o bfa_csdebug.o \
> + bfa_sm.o plog.o
a) use of -objs is deprecated.
Please use:
bfa-y := bfad.o ...
b) As a style thing the following is preferred (by me at least):
bfa-y := bfad.o bfad_intr.o bfad_os.o bfad_im.o bfad_attr.o bfad_fwimg.o
# core stuff
bfa-y += bfa_core.o bfa_ioc.o bfa_iocfc.o bfa_fcxp.o bfa_diag.o
# interrup hander
bfa-y += bfa_intr.o
No longer any need for escaping the newline with a backslahs
And you can add descriptive comments too.
> +EXTRA_CFLAGS += -I$(obj) -I$(obj)/include
Neither of the above is needed.
If you really need to specify addtional options to gcc use:
ccflags-y := ...
Sam