2009-04-07 06:34:56

by Ralf Hildebrandt

[permalink] [raw]
Subject: WATCHDOG i6300ESB doesn't reboot the machine

I recently installed the watchdog package along with the i6300ESB
module. I killed the watchdog process and waited for the reboot. To no
avail. Is my test flawed? I even stopped the watchdog process,
unloaded and loaded the i6300esb module: No reboot.

This is an HP-Server.

dmesg output:

[ 140.017922] i6300ESB timer: initialized (0xf86cc000). heartbeat=30 sec (nowayout=0)

lspci -vv output:

00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] PCI-X bridge device
Secondary Status: 64bit+ 133MHz- SCD- USC- SCO- SRD- Freq=66MHz
Status: Dev=00:1c.0 64bit+ 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=0
Downstream: Capacity=65535 CommitmentLimit=0

# uname -a
Linux mail-ausfall.charite.de 2.6.29.1 #1 SMP Mon Apr 6 15:25:51 CEST 2009 i686 GNU/Linux

# cat /etc/issue
Debian GNU/Linux squeeze/sid \n \l

# lsmod |grep esb
i6300esb 4852 0

# ll /dev/watchdog
crw-rw---- 1 root root 10, 130 6. Apr 15:31 /dev/watchdog

--
Ralf Hildebrandt
Geschäftsbereich IT | Abteilung Netzwerk
Charité - Universitätsmedizin Berlin
Campus Benjamin Franklin
Hindenburgdamm 30 | D-12200 Berlin
Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962
[email protected] | http://www.charite.de