2009-04-07 20:52:16

by djwong

Subject: [PATCH] ibmaem: Automatically load on HC10 blade

Enable auto-probing for the HC10 blade and amend the supported system list.

Signed-off-by: Darrick J. Wong <[email protected]>
---

Documentation/hwmon/ibmaem | 2 +-
drivers/hwmon/Kconfig | 2 +-
drivers/hwmon/ibmaem.c | 1 +
3 files changed, 3 insertions(+), 2 deletions(-)


diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem
index e98bdfe..1e0d59e 100644
--- a/Documentation/hwmon/ibmaem
+++ b/Documentation/hwmon/ibmaem
@@ -7,7 +7,7 @@ henceforth as AEM.
Supported systems:
* Any recent IBM System X server with AEM support.
This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
- x3950 M2, and certain HS2x/LS2x/QS2x blades. The IPMI host interface
+ x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades. The IPMI host interface
driver ("ipmi-si") needs to be loaded for this driver to do anything.
Prefix: 'ibmaem'
Datasheet: Not available
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index b4eea02..208d0c7 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -395,7 +395,7 @@ config SENSORS_IBMAEM
power sensors and capping hardware in various IBM System X
servers that support Active Energy Manager. This includes
the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
- and certain HS2x/LS2x/QS2x blades.
+ and certain HC10/HS2x/LS2x/QS2x blades.

This driver can also be built as a module. If so, the module
will be called ibmaem.
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index fe74609..405d3fb 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -1127,3 +1127,4 @@ MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650-*");
MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3655-*");
MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3755-*");
MODULE_ALIAS("dmi:bvnIBM:*:pnIBM3850M2/x3950M2-*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMBladeHC10-*");

2009-04-08 08:28:11

by Jean Delvare

Subject: Re: [PATCH] ibmaem: Automatically load on HC10 blade

Hi Darrick,

On Tue, 7 Apr 2009 13:51:54 -0700, Darrick J. Wong wrote:
> Enable auto-probing for the HC10 blade and amend the supported system list.
>
> Signed-off-by: Darrick J. Wong <[email protected]>
> ---
>
> Documentation/hwmon/ibmaem | 2 +-
> drivers/hwmon/Kconfig | 2 +-
> drivers/hwmon/ibmaem.c | 1 +
> 3 files changed, 3 insertions(+), 2 deletions(-)

Applied, thanks.

--
Jean Delvare