Hi all,
please have a look at following patch which adds support for Leadtek WinFast
DTV Dongle H (hybrid - currently only DVB-T reception works, analog is not
supported).
This patch shoud go directly to stable release - no external functionality is
added.
Patch is against latest v4l merculial from linuxtv.org
diff -urN
v4l-dvb-b40d628f830d/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
v4l-dvb-b40d628f830d.edited/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
--- v4l-dvb-b40d628f830d/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
2009-04-24 06:46:41.000000000 +0200
+++
v4l-dvb-b40d628f830d.edited/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
2009-04-28 07:19:43.000000000 +0200
@@ -1498,6 +1498,7 @@
{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) },
{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) },
/* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) },
+ { USB_DEVICE(USB_VID_LEADTEK,
USB_PID_WINFAST_DTV_DONGLE_STK7700PH) },
{ 0 } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1821,7 +1822,7 @@
},[email protected]
},
- .num_device_descs = 7,
+ .num_device_descs = 8,
.devices = {
{ "Terratec Cinergy HT USB XE",
{ &dib0700_usb_id_table[27], NULL },
@@ -1851,6 +1852,10 @@
{ &dib0700_usb_id_table[48], NULL },
{ NULL },
},
+ { "LEADTEK WinFast DTV Dongle H",
+ { &dib0700_usb_id_table[51], NULL },
+ { NULL },
+ },
},
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_key_map = dib0700_rc_keys,
diff -urN v4l-dvb-b40d628f830d/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
v4l-dvb-b40d628f830d.edited/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
--- v4l-dvb-b40d628f830d/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
2009-04-24 06:46:41.000000000 +0200
+++ v4l-dvb-b40d628f830d.edited/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
2009-04-28 07:17:00.000000000 +0200
@@ -225,6 +225,7 @@
#define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026
#define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00
#define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2 0x6f01
+#define USB_PID_WINFAST_DTV_DONGLE_STK7700PH 0x60f6
#define USB_PID_WINFAST_DTV_DONGLE_GOLD 0x6029
#define USB_PID_GENPIX_8PSK_REV_1_COLD 0x0200
#define USB_PID_GENPIX_8PSK_REV_1_WARM 0x0201
After patch you can see this:
usb 3-1: new high speed USB device using ehci_hcd and address 3
usb 3-1: configuration #1 chosen from 1 choice
dib0700: loaded with support for 9 different device-types
dvb-usb: found a 'LEADTEK WinFast DTV Dongle H' in cold state, will try to
load
a firmware
usb 3-1: firmware: requesting dvb-usb-dib0700-1.20.fw
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'LEADTEK WinFast DTV Dongle H' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (LEADTEK WinFast DTV Dongle H)
DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
xc2028 6-0061: creating new instance
xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner
input: IR-receiver inside an USB DVB receiver as /class/input/input8
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: LEADTEK WinFast DTV Dongle H successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
i2c-adapter i2c-6: firmware: requesting xc3028-v27.fw
xc2028 6-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028
firmw
are, ver 2.7
xc2028 6-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 6-0061: Loading firmware for type=D2620 DTV8 (208), id
0000000000000000.
xc2028 6-0061: Loading SCODE for type=DTV7 DTV78 DTV8 DIBCOM52 CHINA SCODE
HAS_I
F_5400 (65000380), id 0000000000000000.
Best regards
Michal