2009-04-01 02:24:22

by JosephChan

[permalink] [raw]
Subject: [Patch 1/1 v5] via-sdmmc: VIA MSP card reader driver support

Hi all,

The following patch provides VIA MSP SD/MMC card reader driver support.
This patch is based on 2.6.29 kernel.
Thanks to Pierre's suggestions.
Please feel free to contact me if any problem. Thanks in advanced.

In addition, the SPEC is available in VX800 Programming guide (Device 13 Function 0) on http://linux.via.com.tw


BRs,
Joseph

=======
Signed-off-by: Joseph Chan<[email protected]>

--- a/drivers/mmc/host/Makefile 2009-03-31 17:59:08.000000000 -0400
+++ b/drivers/mmc/host/Makefile 2009-03-31 17:55:55.000000000 -0400
@@ -27,4 +27,5 @@
obj-$(CONFIG_MMC_S3C) += s3cmci.o
obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
+obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o

--- a/drivers/mmc/host/Kconfig 2009-03-23 19:12:14.000000000 -0400
+++ b/drivers/mmc/host/Kconfig 2009-03-31 17:55:36.000000000 -0400
@@ -212,3 +212,16 @@
help
This provides support for the SD/MMC cell found in TC6393XB,
T7L66XB and also ipaq ASIC3
+
+config MMC_VIA_SDMMC
+ tristate "VIA SD/MMC Card Reader Driver"
+ depends on PCI
+ help
+ This selects the VIA SD/MMC Card Reader driver, say Y or M here.
+ VIA provides one multi-functional card reader which integrated into
+ some motherboards manufactured by VIA. This card reader supports
+ SD/MMC/SDHC.
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
--- a/drivers/mmc/host/via-sdmmc.c 1969-12-31 19:00:00.000000000 -0500
+++ b/drivers/mmc/host/via-sdmmc.c 2009-03-31 17:57:39.000000000 -0400
@@ -0,0 +1,1313 @@
+/*
+ * drivers/mmc/host/via-sdmmc.c - VIA SD/MMC Card Reader driver
+ * Copyright (c) 2008, VIA Technologies Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
+#include <linux/delay.h>
+
+#include <linux/mmc/host.h>
+
+#define DRV_NAME "via_sdmmc_driver"
+
+#define MMC_STOP_TRANSMISSION 12
+#define PCI_DEVICE_ID_VIA_9530 0x9530
+
+#define VIA_CRDR_SDC_OFF 0x200
+#define VIA_CRDR_DDMA_OFF 0x400
+#define VIA_CRDR_PCICTRL_OFF 0x600
+
+#define VIA_CRDR_MIN_CLOCK 375000
+#define VIA_CRDR_MAX_CLOCK 48000000
+
+/*
+ * PCI registers
+ */
+
+#define VIA_CRDR_PCI_WORK_MODE 0x40
+#define VIA_CRDR_PCI_DBG_MODE 0x41
+
+/*
+ * SDC MMIO Registers
+ */
+
+#define VIA_CRDR_SDCTRL 0x0
+#define VIA_CRDR_SDCTRL_START 0x01
+#define VIA_CRDR_SDCTRL_WRITE 0x04
+#define VIA_CRDR_SDCTRL_SINGLE_WR 0x10
+#define VIA_CRDR_SDCTRL_SINGLE_RD 0x20
+#define VIA_CRDR_SDCTRL_MULTI_WR 0x30
+#define VIA_CRDR_SDCTRL_MULTI_RD 0x40
+#define VIA_CRDR_SDCTRL_STOP 0x70
+
+#define VIA_CRDR_SDCTRL_RSP_NONE 0x0
+#define VIA_CRDR_SDCTRL_RSP_R1 0x10000
+#define VIA_CRDR_SDCTRL_RSP_R2 0x20000
+#define VIA_CRDR_SDCTRL_RSP_R3 0x30000
+#define VIA_CRDR_SDCTRL_RSP_R1B 0x90000
+
+#define VIA_CRDR_SDCARG 0x4
+
+#define VIA_CRDR_SDBUSMODE 0x8
+#define VIA_CRDR_SDMODE_4BIT 0x02
+#define VIA_CRDR_SDMODE_POWER 0x40
+
+#define VIA_CRDR_SDBLKLEN 0xc
+/*
+ * Bit 0 -Bit 10 : Block length. So, the maximum block length should be 2048.
+ * Bit 11 - Bit 13 : Reserved.
+ * GPIDET : Select GPI pin to detect card, GPI means CR_CD# in top design.
+ * INTEN : Enable SD host interrupt.
+ * Bit 16 - Bit 31 : Block count. So, the maximun block count should be 65536.
+ */
+#define VIA_CRDR_SDBLKLEN_GPIDET 0x2000
+#define VIA_CRDR_SDBLKLEN_INTEN 0x8000
+#define VIA_CRDR_MAX_BLOCK_COUNT 65536
+#define VIA_CRDR_MAX_BLOCK_LENGTH 2048
+
+#define VIA_CRDR_SDRESP0 0x10
+#define VIA_CRDR_SDRESP1 0x14
+#define VIA_CRDR_SDRESP2 0x18
+#define VIA_CRDR_SDRESP3 0x1c
+
+#define VIA_CRDR_SDCURBLKCNT 0x20
+
+#define VIA_CRDR_SDINTMASK 0x24
+/*
+ * MBDIE : Multiple Blocks transfer Done Interrupt Enable
+ * BDDIE : Block Data transfer Done Interrupt Enable
+ * CIRIE : Card Insertion or Removal Interrupt Enable
+ * CRDIE : Command-Response transfer Done Interrupt Enable
+ * CRTOIE : Command-Response response TimeOut Interrupt Enable
+ * ASCRDIE : Auto Stop Command-Response transfer Done Interrupt Enable
+ * DTIE : Data access Timeout Interrupt Enable
+ * SCIE : reSponse CRC error Interrupt Enable
+ * RCIE : Read data CRC error Interrupt Enable
+ * WCIE : Write data CRC error Interrupt Enable
+ */
+#define VIA_CRDR_SDINTMASK_MBDIE 0x10
+#define VIA_CRDR_SDINTMASK_BDDIE 0x20
+#define VIA_CRDR_SDINTMASK_CIRIE 0x80
+#define VIA_CRDR_SDINTMASK_CRDIE 0x200
+#define VIA_CRDR_SDINTMASK_CRTOIE 0x400
+#define VIA_CRDR_SDINTMASK_ASCRDIE 0x800
+#define VIA_CRDR_SDINTMASK_DTIE 0x1000
+#define VIA_CRDR_SDINTMASK_SCIE 0x2000
+#define VIA_CRDR_SDINTMASK_RCIE 0x4000
+#define VIA_CRDR_SDINTMASK_WCIE 0x8000
+
+#define VIA_CRDR_SDACTIVE_INTMASK \
+ (VIA_CRDR_SDINTMASK_MBDIE | VIA_CRDR_SDINTMASK_CIRIE \
+ | VIA_CRDR_SDINTMASK_CRDIE | VIA_CRDR_SDINTMASK_CRTOIE \
+ | VIA_CRDR_SDINTMASK_DTIE | VIA_CRDR_SDINTMASK_SCIE \
+ | VIA_CRDR_SDINTMASK_RCIE | VIA_CRDR_SDINTMASK_WCIE)
+
+#define VIA_CRDR_SDSTATUS 0x28
+/*
+ * CECC : Reserved
+ * WP : SD card Write Protect status
+ * SLOTD : Reserved
+ * SLOTG : SD SLOT status(Gpi pin status)
+ * MBD : Multiple Blocks transfer Done interrupt status
+ * BDD : Block Data transfer Done interrupt status
+ * CD : Reserved
+ * CIR : Card Insertion or Removal interrupt detected on GPI pin
+ * IO : Reserved
+ * CRD : Command-Response transfer Done interrupt status
+ * CRTO : Command-Response response TimeOut interrupt status
+ * ASCRDIE : Auto Stop Command-Response transfer Done interrupt status
+ * DT : Data access Timeout interrupt status
+ * SC : reSponse CRC error interrupt status
+ * RC : Read data CRC error interrupt status
+ * WC : Write data CRC error interrupt status
+ */
+#define VIA_CRDR_SDSTS_CECC 0x01
+#define VIA_CRDR_SDSTS_WP 0x02
+#define VIA_CRDR_SDSTS_SLOTD 0x04
+#define VIA_CRDR_SDSTS_SLOTG 0x08
+#define VIA_CRDR_SDSTS_MBD 0x10
+#define VIA_CRDR_SDSTS_BDD 0x20
+#define VIA_CRDR_SDSTS_CD 0x40
+#define VIA_CRDR_SDSTS_CIR 0x80
+#define VIA_CRDR_SDSTS_IO 0x100
+#define VIA_CRDR_SDSTS_CRD 0x200
+#define VIA_CRDR_SDSTS_CRTO 0x400
+#define VIA_CRDR_SDSTS_ASCRDIE 0x800
+#define VIA_CRDR_SDSTS_DT 0x1000
+#define VIA_CRDR_SDSTS_SC 0x2000
+#define VIA_CRDR_SDSTS_RC 0x4000
+#define VIA_CRDR_SDSTS_WC 0x8000
+
+#define VIA_CRDR_SDSTS_IGN_MASK\
+ (VIA_CRDR_SDSTS_BDD | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_IO)
+#define VIA_CRDR_SDSTS_INT_MASK \
+ (VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_BDD | VIA_CRDR_SDSTS_CD \
+ | VIA_CRDR_SDSTS_CIR | VIA_CRDR_SDSTS_IO | VIA_CRDR_SDSTS_CRD \
+ | VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_DT \
+ | VIA_CRDR_SDSTS_SC | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC)
+#define VIA_CRDR_SDSTS_W1C_MASK \
+ (VIA_CRDR_SDSTS_CECC | VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_BDD \
+ | VIA_CRDR_SDSTS_CD | VIA_CRDR_SDSTS_CIR | VIA_CRDR_SDSTS_CRD \
+ | VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_DT \
+ | VIA_CRDR_SDSTS_SC | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC)
+#define VIA_CRDR_SDSTS_CMD_MASK \
+ (VIA_CRDR_SDSTS_CRD | VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_SC)
+#define VIA_CRDR_SDSTS_DATA_MASK\
+ (VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_DT \
+ | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC)
+
+#define VIA_CRDR_SDSTATUS2 0x2a
+/*
+ * CFE : Enable SD host automatic Clock FReezing
+ */
+#define VIA_CRDR_SDSTS_CFE 0x80
+
+#define VIA_CRDR_SDRSPTMO 0x2C
+
+#define VIA_CRDR_SDCLKSEL 0x30
+
+#define VIA_CRDR_SDEXTCTRL 0x34
+/* 0x38-0xFF reserved */
+
+/*
+ * Data DMA Control Registers
+ */
+
+#define VIA_CRDR_DMABASEADD 0x0
+#define VIA_CRDR_DMACOUNTER 0x4
+
+#define VIA_CRDR_DMACTRL 0x8
+/*
+ * DIR :Transaction Direction
+ * 0 : From card to memory
+ * 1 : From memory to card
+ */
+#define VIA_CRDR_DMACTRL_DIR 0x100
+#define VIA_CRDR_DMACTRL_ENIRQ 0x10000
+#define VIA_CRDR_DMACTRL_SFTRST 0x1000000
+
+#define VIA_CRDR_DMASTS 0xc
+
+#define VIA_CRDR_DMASTART 0x10
+/*0x14-0xFF reserved*/
+
+/*
+ * PCI Control Registers
+ */
+
+/*0x0 - 0x1 reserved*/
+#define VIA_CRDR_PCICLKGATT 0x2
+/*
+ * SFTRST :
+ * 0 : Soft reset all the controller and it will be de-asserted automatically
+ * 1 : Soft reset is de-asserted
+ */
+#define VIA_CRDR_PCICLKGATT_SFTRST 0x01
+/*
+ * POWSEL : Pad power select
+ * 0 : 1.8V
+ * 1 : 3.3V
+ * NOTE : No mater what the actual value should be, this bit always
+ * read as 0. This is a hardware bug.
+ */
+#define VIA_CRDR_PCICLKGATT_POWSEL 0x10
+#define VIA_CRDR_POW_180 0
+#define VIA_CRDR_POW_330 1
+/*
+ * POWOFF : Power on/off select
+ * 0 : Power off
+ * 1 : Power on
+ * NOTE : No mater what the actual value should be, this bit always
+ * read as 0. This is a hardware bug.
+ */
+#define VIA_CRDR_PCICLKGATT_POWOFF 0x20
+
+#define VIA_CRDR_PCISDCCLK 0x5
+
+#define VIA_CRDR_PCIDMACLK 0x7
+#define VIA_CRDR_PCIDMACLK_SDC 0x2
+
+#define VIA_CRDR_PCIINTCTRL 0x8
+#define VIA_CRDR_PCIINTCTRL_SDCIRQEN 0x04
+
+#define VIA_CRDR_PCIINTSTATUS 0x9
+#define VIA_CRDR_PCIINTSTATUS_SDC 0x04
+
+#define VIA_CRDR_PCITMOCTRL 0xa
+#define VIA_CRDR_PCITMOCTRL_NO 0x0
+#define VIA_CRDR_PCITMOCTRL_32US 0x1
+#define VIA_CRDR_PCITMOCTRL_256US 0x2
+#define VIA_CRDR_PCITMOCTRL_1024US 0x3
+#define VIA_CRDR_PCITMOCTRL_256MS 0x4
+#define VIA_CRDR_PCITMOCTRL_512MS 0x5
+#define VIA_CRDR_PCITMOCTRL_1024MS 0x6
+
+/*0xB-0xFF reserved*/
+
+enum PCI_HOST_CLK_CONTROL {
+ PCI_CLK_375K = 0x03,
+ PCI_CLK_8M = 0x04,
+ PCI_CLK_12M = 0x00,
+ PCI_CLK_16M = 0x05,
+ PCI_CLK_24M = 0x01,
+ PCI_CLK_33M = 0x06,
+ PCI_CLK_48M = 0x02
+};
+
+struct sdhcreg {
+ u32 sdcontrol_reg;
+ u32 sdcmdarg_reg;
+ u32 sdbusmode_reg;
+ u32 sdblklen_reg;
+ u32 sdresp_reg[4];
+ u32 sdcurblkcnt_reg;
+ u32 sdintmask_reg;
+ u32 sdstatus_reg;
+ u32 sdrsptmo_reg;
+ u32 sdclksel_reg;
+ u32 sdextctrl_reg;
+};
+
+struct pcictrlreg {
+ u8 reserve[2];
+ u8 pciclkgat_reg;
+ u8 pcinfcclk_reg;
+ u8 pcimscclk_reg;
+ u8 pcisdclk_reg;
+ u8 pcicaclk_reg;
+ u8 pcidmaclk_reg;
+ u8 pciintctrl_reg;
+ u8 pciintstatus_reg;
+ u8 pcitmoctrl_reg;
+ u8 Resv;
+};
+
+struct via_crdr_mmc_host {
+ struct mmc_host *mmc;
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+
+ void __iomem *mmiobase;
+ void __iomem *sdhc_mmiobase;
+ void __iomem *ddma_mmiobase;
+ void __iomem *pcictrl_mmiobase;
+
+ struct pcictrlreg pm_pcictrl_reg;
+ struct sdhcreg pm_sdhc_reg;
+
+ struct work_struct carddet_work;
+ struct tasklet_struct finish_tasklet;
+
+ struct timer_list timer;
+ spinlock_t lock;
+ u8 power;
+};
+
+static struct pci_device_id via_ids[] = {
+ {PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_9530,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, via_ids);
+
+static void via_print_sdchc(struct via_crdr_mmc_host *host)
+{
+ void __iomem *addrbase;
+
+ addrbase = host->sdhc_mmiobase;
+
+ pr_debug("SDC MMIO Registers:\n");
+ pr_debug("SDCONTROL=%x ,", readl(addrbase + VIA_CRDR_SDCTRL));
+ pr_debug("SDCMDARG=%x ,", readl(addrbase + VIA_CRDR_SDCARG));
+ pr_debug("SDBUSMODE=%x\n", readl(addrbase + VIA_CRDR_SDBUSMODE));
+ pr_debug("SDBLKLEN=%x ,", readl(addrbase + VIA_CRDR_SDBLKLEN));
+ pr_debug("SDCURBLKCNT=%x,", readl(addrbase + VIA_CRDR_SDCURBLKCNT));
+ pr_debug("SDINTMASK=%x\n", readl(addrbase + VIA_CRDR_SDINTMASK));
+ pr_debug("SDSTATUS=%x,", readl(addrbase + VIA_CRDR_SDSTATUS));
+ pr_debug("SDCLKSEL=%x,", readl(addrbase + VIA_CRDR_SDCLKSEL));
+ pr_debug("SDEXTCTRL=%x\n", readl(addrbase + VIA_CRDR_SDEXTCTRL));
+}
+
+static void via_print_pcictrl(struct via_crdr_mmc_host *host)
+{
+ void __iomem *addrbase;
+
+ addrbase = host->pcictrl_mmiobase;
+
+ pr_debug("PCI Control Registers:\n");
+ pr_debug("PCICLKGATT=%x,", readb(addrbase + VIA_CRDR_PCICLKGATT));
+ pr_debug("PCISDCCLK=%x,", readb(addrbase + VIA_CRDR_PCISDCCLK));
+ pr_debug("PCIDMACLK=%x\n,", readb(addrbase + VIA_CRDR_PCIDMACLK));
+ pr_debug("PCIINTCTRL=%x,", readb(addrbase + VIA_CRDR_PCIINTCTRL));
+ pr_debug("PCIINTSTATUS=%x\n", readb(addrbase + VIA_CRDR_PCIINTSTATUS));
+}
+
+static void via_save_pcictrlreg(struct via_crdr_mmc_host *host)
+{
+ struct pcictrlreg *pm_pcictrl_reg;
+ void __iomem *addrbase;
+
+ pm_pcictrl_reg = &(host->pm_pcictrl_reg);
+ addrbase = host->pcictrl_mmiobase;
+
+ pm_pcictrl_reg->pciclkgat_reg = readb(addrbase + VIA_CRDR_PCICLKGATT);
+ pm_pcictrl_reg->pciclkgat_reg |=
+ VIA_CRDR_PCICLKGATT_POWSEL | VIA_CRDR_PCICLKGATT_POWOFF;
+ pm_pcictrl_reg->pcisdclk_reg = readb(addrbase + VIA_CRDR_PCISDCCLK);
+ pm_pcictrl_reg->pcidmaclk_reg = readb(addrbase + VIA_CRDR_PCIDMACLK);
+ pm_pcictrl_reg->pciintctrl_reg = readb(addrbase + VIA_CRDR_PCIINTCTRL);
+ pm_pcictrl_reg->pciintstatus_reg =
+ readb(addrbase + VIA_CRDR_PCIINTSTATUS);
+ pm_pcictrl_reg->pcitmoctrl_reg = readb(addrbase + VIA_CRDR_PCITMOCTRL);
+}
+
+static void via_restore_pcictrlreg(struct via_crdr_mmc_host *host)
+{
+ struct pcictrlreg *pm_pcictrl_reg;
+ void __iomem *addrbase;
+
+ pm_pcictrl_reg = &(host->pm_pcictrl_reg);
+ addrbase = host->pcictrl_mmiobase;
+
+ writeb(pm_pcictrl_reg->pciclkgat_reg, addrbase + VIA_CRDR_PCICLKGATT);
+ writeb(pm_pcictrl_reg->pcisdclk_reg, addrbase + VIA_CRDR_PCISDCCLK);
+ writeb(pm_pcictrl_reg->pcidmaclk_reg, addrbase + VIA_CRDR_PCIDMACLK);
+ writeb(pm_pcictrl_reg->pciintctrl_reg, addrbase + VIA_CRDR_PCIINTCTRL);
+ writeb(pm_pcictrl_reg->pciintstatus_reg,
+ addrbase + VIA_CRDR_PCIINTSTATUS);
+ writeb(pm_pcictrl_reg->pcitmoctrl_reg, addrbase + VIA_CRDR_PCITMOCTRL);
+}
+
+static void via_save_sdcreg(struct via_crdr_mmc_host *host)
+{
+ struct sdhcreg *pm_sdhc_reg;
+ void __iomem *addrbase;
+
+ pm_sdhc_reg = &(host->pm_sdhc_reg);
+ addrbase = host->sdhc_mmiobase;
+
+ pm_sdhc_reg->sdcontrol_reg = readl(addrbase + VIA_CRDR_SDCTRL);
+ pm_sdhc_reg->sdcmdarg_reg = readl(addrbase + VIA_CRDR_SDCARG);
+ pm_sdhc_reg->sdbusmode_reg = readl(addrbase + VIA_CRDR_SDBUSMODE);
+ pm_sdhc_reg->sdblklen_reg = readl(addrbase + VIA_CRDR_SDBLKLEN);
+ pm_sdhc_reg->sdcurblkcnt_reg = readl(addrbase + VIA_CRDR_SDCURBLKCNT);
+ pm_sdhc_reg->sdintmask_reg = readl(addrbase + VIA_CRDR_SDINTMASK);
+ pm_sdhc_reg->sdstatus_reg = readl(addrbase + VIA_CRDR_SDSTATUS);
+ pm_sdhc_reg->sdrsptmo_reg = readl(addrbase + VIA_CRDR_SDRSPTMO);
+ pm_sdhc_reg->sdclksel_reg = readl(addrbase + VIA_CRDR_SDCLKSEL);
+ pm_sdhc_reg->sdextctrl_reg = readl(addrbase + VIA_CRDR_SDEXTCTRL);
+}
+
+static void via_restore_sdcreg(struct via_crdr_mmc_host *host)
+{
+ struct sdhcreg *pm_sdhc_reg;
+ void __iomem *addrbase;
+
+ pm_sdhc_reg = &(host->pm_sdhc_reg);
+ addrbase = host->sdhc_mmiobase;
+
+ writel(pm_sdhc_reg->sdcontrol_reg, addrbase + VIA_CRDR_SDCTRL);
+ writel(pm_sdhc_reg->sdcmdarg_reg, addrbase + VIA_CRDR_SDCARG);
+ writel(pm_sdhc_reg->sdbusmode_reg, addrbase + VIA_CRDR_SDBUSMODE);
+ writel(pm_sdhc_reg->sdblklen_reg, addrbase + VIA_CRDR_SDBLKLEN);
+ writel(pm_sdhc_reg->sdcurblkcnt_reg, addrbase + VIA_CRDR_SDCURBLKCNT);
+ writel(pm_sdhc_reg->sdintmask_reg, addrbase + VIA_CRDR_SDINTMASK);
+ writel(pm_sdhc_reg->sdstatus_reg, addrbase + VIA_CRDR_SDSTATUS);
+ writel(pm_sdhc_reg->sdrsptmo_reg, addrbase + VIA_CRDR_SDRSPTMO);
+ writel(pm_sdhc_reg->sdclksel_reg, addrbase + VIA_CRDR_SDCLKSEL);
+ writel(pm_sdhc_reg->sdextctrl_reg, addrbase + VIA_CRDR_SDEXTCTRL);
+}
+
+static void via_set_ddma(struct via_crdr_mmc_host *host,
+ dma_addr_t dmaaddr, u32 count, int dir, int enirq)
+{
+ void __iomem *addrbase;
+ u32 ctrl_data = 0;
+
+ if (enirq)
+ ctrl_data |= VIA_CRDR_DMACTRL_ENIRQ;
+
+ if (dir)
+ ctrl_data |= VIA_CRDR_DMACTRL_DIR;
+
+ addrbase = host->ddma_mmiobase;
+
+ writel(dmaaddr, addrbase + VIA_CRDR_DMABASEADD);
+ writel(count, addrbase + VIA_CRDR_DMACOUNTER);
+ writel(ctrl_data, addrbase + VIA_CRDR_DMACTRL);
+ writel(0x01, addrbase + VIA_CRDR_DMASTART);
+
+ /*It seems that our DMA can not work normally with 375KHz clock*/
+ addrbase = host->pcictrl_mmiobase;
+ if (readb(addrbase + VIA_CRDR_PCISDCCLK) == PCI_CLK_375K)
+ writeb(PCI_CLK_8M, addrbase + VIA_CRDR_PCISDCCLK);
+}
+
+static void via_sdc_preparedata(struct via_crdr_mmc_host *host,
+ struct mmc_data *data)
+{
+ void __iomem *addrbase;
+ u32 blk_reg;
+ int count;
+
+ WARN_ON(host->data);
+
+ /* Sanity checks */
+ BUG_ON(data->blksz > host->mmc->max_blk_size);
+ BUG_ON(data->blocks > host->mmc->max_blk_count);
+
+ host->data = data;
+
+ count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ ((data->flags & MMC_DATA_READ) ?
+ PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE));
+ BUG_ON(count != 1);
+
+ via_set_ddma(host, sg_dma_address(data->sg), sg_dma_len(data->sg),
+ (data->flags & MMC_DATA_WRITE) ? 1 : 0, 1);
+
+ addrbase = host->sdhc_mmiobase;
+
+ blk_reg = data->blksz - 1;
+ blk_reg |= VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN;
+ blk_reg |= (data->blocks) << 16;
+
+ writel(blk_reg, addrbase + VIA_CRDR_SDBLKLEN);
+}
+
+static void via_sdc_get_response(struct via_crdr_mmc_host *host,
+ struct mmc_command *cmd)
+{
+ void __iomem *addrbase = host->sdhc_mmiobase;
+ u32 dwdata0 = readl(addrbase + VIA_CRDR_SDRESP0);
+ u32 dwdata1 = readl(addrbase + VIA_CRDR_SDRESP1);
+ u32 dwdata2 = readl(addrbase + VIA_CRDR_SDRESP2);
+ u32 dwdata3 = readl(addrbase + VIA_CRDR_SDRESP3);
+
+ if (cmd->flags & MMC_RSP_136) {
+ cmd->resp[0] = ((u8) (dwdata1)) |
+ (((u8) (dwdata0 >> 24)) << 8) |
+ (((u8) (dwdata0 >> 16)) << 16) |
+ (((u8) (dwdata0 >> 8)) << 24);
+
+ cmd->resp[1] = ((u8) (dwdata2)) |
+ (((u8) (dwdata1 >> 24)) << 8) |
+ (((u8) (dwdata1 >> 16)) << 16) |
+ (((u8) (dwdata1 >> 8)) << 24);
+
+ cmd->resp[2] = ((u8) (dwdata3)) |
+ (((u8) (dwdata2 >> 24)) << 8) |
+ (((u8) (dwdata2 >> 16)) << 16) |
+ (((u8) (dwdata2 >> 8)) << 24);
+
+ cmd->resp[3] = 0xff |
+ ((((u8) (dwdata3 >> 24))) << 8) |
+ (((u8) (dwdata3 >> 16)) << 16) |
+ (((u8) (dwdata3 >> 8)) << 24);
+ } else {
+ dwdata0 >>= 8;
+ cmd->resp[0] = ((dwdata0 & 0xff) << 24) |
+ (((dwdata0 >> 8) & 0xff) << 16) |
+ (((dwdata0 >> 16) & 0xff) << 8) | (dwdata1 & 0xff);
+
+ dwdata1 >>= 8;
+ cmd->resp[1] = ((dwdata1 & 0xff) << 24) |
+ (((dwdata1 >> 8) & 0xff) << 16) |
+ (((dwdata1 >> 16) & 0xff) << 8);
+ }
+}
+
+static void via_sdc_send_command(struct via_crdr_mmc_host *host,
+ struct mmc_command *cmd)
+{
+ void __iomem *addrbase;
+ struct mmc_data *data;
+ u32 cmdctrl = 0;
+
+ WARN_ON(host->cmd);
+
+ data = cmd->data;
+ mod_timer(&host->timer, jiffies + HZ);
+ host->cmd = cmd;
+
+ /*Command index*/
+ cmdctrl = cmd->opcode << 8;
+
+ /*Response type*/
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ cmdctrl |= VIA_CRDR_SDCTRL_RSP_NONE;
+ break;
+ case MMC_RSP_R1:
+ cmdctrl |= VIA_CRDR_SDCTRL_RSP_R1;
+ break;
+ case MMC_RSP_R1B:
+ cmdctrl |= VIA_CRDR_SDCTRL_RSP_R1B;
+ break;
+ case MMC_RSP_R2:
+ cmdctrl |= VIA_CRDR_SDCTRL_RSP_R2;
+ break;
+ case MMC_RSP_R3:
+ cmdctrl |= VIA_CRDR_SDCTRL_RSP_R3;
+ break;
+ default:
+ pr_err("%s: cmd->flag is not valid\n", mmc_hostname(host->mmc));
+ break;
+ }
+
+ if (!(cmd->data))
+ goto nodata;
+
+ via_sdc_preparedata(host, data);
+
+ /*Command control*/
+ if (data->blocks > 1) {
+ if (data->flags & MMC_DATA_WRITE) {
+ cmdctrl |= VIA_CRDR_SDCTRL_WRITE;
+ cmdctrl |= VIA_CRDR_SDCTRL_MULTI_WR;
+ } else {
+ cmdctrl |= VIA_CRDR_SDCTRL_MULTI_RD;
+ }
+ } else {
+ if (data->flags & MMC_DATA_WRITE) {
+ cmdctrl |= VIA_CRDR_SDCTRL_WRITE;
+ cmdctrl |= VIA_CRDR_SDCTRL_SINGLE_WR;
+ } else {
+ cmdctrl |= VIA_CRDR_SDCTRL_SINGLE_RD;
+ }
+ }
+
+nodata:
+ if (cmd->opcode == MMC_STOP_TRANSMISSION)
+ cmdctrl |= VIA_CRDR_SDCTRL_STOP;
+
+ cmdctrl |= VIA_CRDR_SDCTRL_START;
+
+ addrbase = host->sdhc_mmiobase;
+ writel(cmd->arg, addrbase + VIA_CRDR_SDCARG);
+ writel(cmdctrl, addrbase + VIA_CRDR_SDCTRL);
+}
+
+static void via_sdc_finish_data(struct via_crdr_mmc_host *host)
+{
+ struct mmc_data *data;
+
+ BUG_ON(!host->data);
+
+ data = host->data;
+ host->data = NULL;
+
+ if (data->error)
+ data->bytes_xfered = 0;
+ else
+ data->bytes_xfered = data->blocks * data->blksz;
+
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ ((data->flags & MMC_DATA_READ) ?
+ PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE));
+
+ if (data->stop)
+ via_sdc_send_command(host, data->stop);
+ else
+ tasklet_schedule(&host->finish_tasklet);
+}
+
+static void via_sdc_finish_command(struct via_crdr_mmc_host *host)
+{
+ via_sdc_get_response(host, host->cmd);
+
+ host->cmd->error = 0;
+
+ if (!host->cmd->data)
+ tasklet_schedule(&host->finish_tasklet);
+
+ host->cmd = NULL;
+}
+
+static void via_sdc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ void __iomem *addrbase;
+ struct via_crdr_mmc_host *host;
+ unsigned long flags;
+ u16 status;
+
+ host = mmc_priv(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ addrbase = host->pcictrl_mmiobase;
+ writeb(VIA_CRDR_PCIDMACLK_SDC, addrbase + VIA_CRDR_PCIDMACLK);
+
+ status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+ status &= VIA_CRDR_SDSTS_W1C_MASK;
+ writew(status, host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+
+ WARN_ON(host->mrq != NULL);
+ host->mrq = mrq;
+
+ status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+ if (!(status & VIA_CRDR_SDSTS_SLOTG)) {
+ host->mrq->cmd->error = -ENOMEDIUM;
+ tasklet_schedule(&host->finish_tasklet);
+ } else {
+ via_sdc_send_command(host, mrq->cmd);
+ }
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void via_sdc_set_power(struct via_crdr_mmc_host *host,
+ unsigned short power)
+{
+ unsigned long flags;
+ u8 gatt, pwr = VIA_CRDR_POW_180;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ switch (1 << power) {
+ case MMC_VDD_165_195:
+ pwr = VIA_CRDR_POW_180;
+ break;
+ case MMC_VDD_32_33:
+ case MMC_VDD_33_34:
+ pwr = VIA_CRDR_POW_330;
+ break;
+ default:
+ BUG();
+ }
+
+ if (host->power == pwr) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ return;
+ }
+
+ host->power = pwr;
+
+ gatt = readb(host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ gatt |= VIA_CRDR_PCICLKGATT_POWOFF;
+ if (pwr == VIA_CRDR_POW_330)
+ gatt |= VIA_CRDR_PCICLKGATT_POWSEL;
+ writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ msleep(3);
+}
+
+static void via_sdc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct via_crdr_mmc_host *host;
+ unsigned long flags;
+ void __iomem *addrbase;
+ u32 org_data;
+ u8 clock;
+
+ host = mmc_priv(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ addrbase = host->sdhc_mmiobase;
+ org_data = readl(addrbase + VIA_CRDR_SDBUSMODE);
+
+ if (ios->bus_width == MMC_BUS_WIDTH_1)
+ org_data &= ~VIA_CRDR_SDMODE_4BIT;
+ else
+ org_data |= VIA_CRDR_SDMODE_4BIT;
+
+ if (ios->power_mode == MMC_POWER_OFF)
+ org_data &= ~VIA_CRDR_SDMODE_POWER;
+ else
+ org_data |= VIA_CRDR_SDMODE_POWER;
+
+ writel(org_data, addrbase + VIA_CRDR_SDBUSMODE);
+
+ if (ios->clock >= 40000000)
+ clock = PCI_CLK_48M;
+ else if (ios->clock >= 30000000)
+ clock = PCI_CLK_33M;
+ else if (ios->clock >= 20000000)
+ clock = PCI_CLK_24M;
+ else if (ios->clock >= 15000000)
+ clock = PCI_CLK_16M;
+ else if (ios->clock >= 10000000)
+ clock = PCI_CLK_12M;
+ else if (ios->clock >= 5000000)
+ clock = PCI_CLK_8M;
+ else
+ clock = PCI_CLK_375K;
+
+ addrbase = host->pcictrl_mmiobase;
+ if (readb(addrbase + VIA_CRDR_PCISDCCLK) != clock)
+ writeb(clock, addrbase + VIA_CRDR_PCISDCCLK);
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ if (ios->power_mode != MMC_POWER_OFF)
+ via_sdc_set_power(host, ios->vdd);
+}
+
+static int via_sdc_get_ro(struct mmc_host *mmc)
+{
+ struct via_crdr_mmc_host *host;
+ unsigned long flags;
+ u16 status;
+
+ host = mmc_priv(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return !(status & VIA_CRDR_SDSTS_WP);
+}
+
+static const struct mmc_host_ops via_sdc_ops = {
+ .request = via_sdc_request,
+ .set_ios = via_sdc_set_ios,
+ .get_ro = via_sdc_get_ro,
+};
+
+static void via_reset_pcictrl(struct via_crdr_mmc_host *host)
+{
+ void __iomem *addrbase;
+ unsigned long flags;
+ u8 gatt;
+
+ addrbase = host->pcictrl_mmiobase;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ via_save_pcictrlreg(host);
+ via_save_sdcreg(host);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ gatt = VIA_CRDR_PCICLKGATT_POWOFF;
+ if (host->power == VIA_CRDR_POW_330)
+ gatt |= VIA_CRDR_PCICLKGATT_POWSEL;
+ writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ msleep(3);
+ gatt |= VIA_CRDR_PCICLKGATT_SFTRST;
+ writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ msleep(3);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ via_restore_pcictrlreg(host);
+ via_restore_sdcreg(host);
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void via_sdc_cmd_isr(struct via_crdr_mmc_host *host, u16 intmask)
+{
+ BUG_ON(intmask == 0);
+
+ if (!host->cmd) {
+ pr_err("%s: Got command interrupt 0x%x even "
+ "though no command operation was in progress.\n",
+ mmc_hostname(host->mmc), intmask);
+ return;
+ }
+
+ if (intmask & VIA_CRDR_SDSTS_CRTO)
+ host->cmd->error = -ETIMEDOUT;
+ else if (intmask & VIA_CRDR_SDSTS_SC)
+ host->cmd->error = -EILSEQ;
+
+ if (host->cmd->error)
+ tasklet_schedule(&host->finish_tasklet);
+ else if (intmask & VIA_CRDR_SDSTS_CRD)
+ via_sdc_finish_command(host);
+}
+
+static void via_sdc_data_isr(struct via_crdr_mmc_host *host, u16 intmask)
+{
+ BUG_ON(intmask == 0);
+
+ if (intmask & VIA_CRDR_SDSTS_DT)
+ host->data->error = -ETIMEDOUT;
+ else if (intmask & (VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC))
+ host->data->error = -EILSEQ;
+
+ via_sdc_finish_data(host);
+}
+
+static irqreturn_t via_sdc_isr(int irq, void *dev_id)
+{
+ struct via_crdr_mmc_host *sdhost = dev_id;
+ void __iomem *addrbase;
+ u8 pci_status;
+ u16 sd_status;
+ irqreturn_t result;
+
+ if (!sdhost)
+ return IRQ_NONE;
+
+ spin_lock(&sdhost->lock);
+
+ addrbase = sdhost->pcictrl_mmiobase;
+ pci_status = readb(addrbase + VIA_CRDR_PCIINTSTATUS);
+ if (!(pci_status & VIA_CRDR_PCIINTSTATUS_SDC)) {
+ result = IRQ_NONE;
+ goto out;
+ }
+
+ addrbase = sdhost->sdhc_mmiobase;
+ sd_status = readw(addrbase + VIA_CRDR_SDSTATUS);
+ sd_status &= VIA_CRDR_SDSTS_INT_MASK;
+ sd_status &= ~VIA_CRDR_SDSTS_IGN_MASK;
+ if (!sd_status) {
+ result = IRQ_NONE;
+ goto out;
+ }
+
+ if (sd_status & VIA_CRDR_SDSTS_CIR) {
+ writew(sd_status & VIA_CRDR_SDSTS_CIR,
+ addrbase + VIA_CRDR_SDSTATUS);
+
+ schedule_work(&sdhost->carddet_work);
+ }
+
+ sd_status &= ~VIA_CRDR_SDSTS_CIR;
+ if (sd_status & VIA_CRDR_SDSTS_CMD_MASK) {
+ writew(sd_status & VIA_CRDR_SDSTS_CMD_MASK,
+ addrbase + VIA_CRDR_SDSTATUS);
+ via_sdc_cmd_isr(sdhost, sd_status & VIA_CRDR_SDSTS_CMD_MASK);
+ }
+ if (sd_status & VIA_CRDR_SDSTS_DATA_MASK) {
+ writew(sd_status & VIA_CRDR_SDSTS_DATA_MASK,
+ addrbase + VIA_CRDR_SDSTATUS);
+ via_sdc_data_isr(sdhost, sd_status & VIA_CRDR_SDSTS_DATA_MASK);
+ }
+
+ sd_status &= ~(VIA_CRDR_SDSTS_CMD_MASK | VIA_CRDR_SDSTS_DATA_MASK);
+ if (sd_status) {
+ pr_err("%s: Unexpected interrupt 0x%x\n",
+ mmc_hostname(sdhost->mmc), sd_status);
+ writew(sd_status, addrbase + VIA_CRDR_SDSTATUS);
+ }
+
+ result = IRQ_HANDLED;
+
+ mmiowb();
+out:
+ spin_unlock(&sdhost->lock);
+
+ return result;
+}
+
+static void via_sdc_timeout(unsigned long ulongdata)
+{
+ struct via_crdr_mmc_host *sdhost;
+ unsigned long flags;
+
+ sdhost = (struct via_crdr_mmc_host *)ulongdata;
+
+ spin_lock_irqsave(&sdhost->lock, flags);
+
+ if (sdhost->mrq) {
+ pr_err("%s: Timeout waiting for hardware interrupt."
+ "cmd:0x%x\n", mmc_hostname(sdhost->mmc),
+ sdhost->mrq->cmd->opcode);
+
+ if (sdhost->data) {
+ writel(VIA_CRDR_DMACTRL_SFTRST,
+ sdhost->ddma_mmiobase + VIA_CRDR_DMACTRL);
+ sdhost->data->error = -ETIMEDOUT;
+ via_sdc_finish_data(sdhost);
+ } else {
+ if (sdhost->cmd)
+ sdhost->cmd->error = -ETIMEDOUT;
+ else
+ sdhost->mrq->cmd->error = -ETIMEDOUT;
+ tasklet_schedule(&sdhost->finish_tasklet);
+ }
+ }
+
+ mmiowb();
+ spin_unlock_irqrestore(&sdhost->lock, flags);
+}
+
+static void via_sdc_tasklet_finish(unsigned long param)
+{
+ struct via_crdr_mmc_host *host;
+ unsigned long flags;
+ struct mmc_request *mrq;
+
+ host = (struct via_crdr_mmc_host *)param;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ del_timer(&host->timer);
+ mrq = host->mrq;
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ mmc_request_done(host->mmc, mrq);
+}
+
+static void via_sdc_card_detect(struct work_struct *work)
+{
+ struct via_crdr_mmc_host *host;
+ void __iomem *addrbase;
+ unsigned long flags;
+ u16 status;
+
+ host = container_of(work, struct via_crdr_mmc_host, carddet_work);
+
+ addrbase = host->ddma_mmiobase;
+ writel(VIA_CRDR_DMACTRL_SFTRST, addrbase + VIA_CRDR_DMACTRL);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ addrbase = host->pcictrl_mmiobase;
+ writeb(VIA_CRDR_PCIDMACLK_SDC, addrbase + VIA_CRDR_PCIDMACLK);
+
+ addrbase = host->sdhc_mmiobase;
+ status = readw(addrbase + VIA_CRDR_SDSTATUS);
+ if (!(status & VIA_CRDR_SDSTS_SLOTG)) {
+ if (host->mrq) {
+ pr_err("%s: Card removed during transfer!\n",
+ mmc_hostname(host->mmc));
+ host->mrq->cmd->error = -ENOMEDIUM;
+ tasklet_schedule(&host->finish_tasklet);
+ }
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ via_reset_pcictrl(host);
+
+ spin_lock_irqsave(&host->lock, flags);
+ }
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ via_print_pcictrl(host);
+ via_print_sdchc(host);
+
+ mmc_detect_change(host->mmc, 0);
+}
+
+static void via_init_mmc_host(struct via_crdr_mmc_host *host)
+{
+ struct mmc_host *mmc = host->mmc;
+ void __iomem *addrbase;
+ u32 lenreg;
+ u32 status;
+
+ init_timer(&host->timer);
+ host->timer.data = (unsigned long)host;
+ host->timer.function = via_sdc_timeout;
+
+ spin_lock_init(&host->lock);
+
+ mmc->f_min = VIA_CRDR_MIN_CLOCK;
+ mmc->f_max = VIA_CRDR_MAX_CLOCK;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+ mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->ops = &via_sdc_ops;
+
+ /*Hardware cannot do scatter lists*/
+ mmc->max_hw_segs = 1;
+ mmc->max_phys_segs = 1;
+
+ mmc->max_blk_size = VIA_CRDR_MAX_BLOCK_LENGTH;
+ mmc->max_blk_count = VIA_CRDR_MAX_BLOCK_COUNT;
+
+ mmc->max_seg_size = mmc->max_blk_size * mmc->max_blk_count;
+ mmc->max_req_size = mmc->max_seg_size;
+
+ INIT_WORK(&host->carddet_work, via_sdc_card_detect);
+
+ tasklet_init(&host->finish_tasklet, via_sdc_tasklet_finish,
+ (unsigned long)host);
+
+ addrbase = host->sdhc_mmiobase;
+ writel(0x0, addrbase + VIA_CRDR_SDINTMASK);
+ msleep(1);
+
+ lenreg = VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN;
+ writel(lenreg, addrbase + VIA_CRDR_SDBLKLEN);
+
+ status = readw(addrbase + VIA_CRDR_SDSTATUS);
+ status &= VIA_CRDR_SDSTS_W1C_MASK;
+ writew(status, addrbase + VIA_CRDR_SDSTATUS);
+
+ status = readw(addrbase + VIA_CRDR_SDSTATUS2);
+ status |= VIA_CRDR_SDSTS_CFE;
+ writew(status, addrbase + VIA_CRDR_SDSTATUS2);
+
+ writeb(0x0, addrbase + VIA_CRDR_SDEXTCTRL);
+
+ writel(VIA_CRDR_SDACTIVE_INTMASK, addrbase + VIA_CRDR_SDINTMASK);
+ msleep(1);
+}
+
+static int __devinit via_sd_probe(struct pci_dev *pcidev,
+ const struct pci_device_id *id)
+{
+ struct mmc_host *mmc;
+ struct via_crdr_mmc_host *sdhost;
+ u32 base, len;
+ u8 rev, gatt;
+ int ret;
+
+ pci_read_config_byte(pcidev, PCI_CLASS_REVISION, &rev);
+ pr_info(DRV_NAME
+ ": VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n",
+ pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device,
+ (int)rev);
+
+ ret = pci_enable_device(pcidev);
+ if (ret)
+ return ret;
+
+ ret = pci_request_regions(pcidev, DRV_NAME);
+ if (ret)
+ goto disable;
+
+ pci_write_config_byte(pcidev, VIA_CRDR_PCI_WORK_MODE, 0);
+ pci_write_config_byte(pcidev, VIA_CRDR_PCI_DBG_MODE, 0);
+
+ mmc = mmc_alloc_host(sizeof(struct via_crdr_mmc_host), &pcidev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto release;
+ }
+
+ sdhost = mmc_priv(mmc);
+ sdhost->mmc = mmc;
+ dev_set_drvdata(&pcidev->dev, sdhost);
+
+ len = pci_resource_len(pcidev, 0);
+ base = pci_resource_start(pcidev, 0);
+ sdhost->mmiobase = ioremap_nocache(base, len);
+ if (!sdhost->mmiobase) {
+ ret = -ENOMEM;
+ goto free_mmc_host;
+ }
+
+ sdhost->sdhc_mmiobase =
+ sdhost->mmiobase + VIA_CRDR_SDC_OFF;
+ sdhost->ddma_mmiobase =
+ sdhost->mmiobase + VIA_CRDR_DDMA_OFF;
+ sdhost->pcictrl_mmiobase =
+ sdhost->mmiobase + VIA_CRDR_PCICTRL_OFF;
+
+ sdhost->power = VIA_CRDR_POW_330;
+
+ gatt = VIA_CRDR_PCICLKGATT_POWSEL | VIA_CRDR_PCICLKGATT_POWOFF;
+ writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ msleep(3);
+ gatt |= VIA_CRDR_PCICLKGATT_SFTRST;
+ writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ msleep(3);
+
+ via_init_mmc_host(sdhost);
+
+ ret =
+ request_irq(pcidev->irq, via_sdc_isr, IRQF_SHARED, DRV_NAME,
+ sdhost);
+ if (ret)
+ goto unmap;
+
+ writeb(VIA_CRDR_PCIINTCTRL_SDCIRQEN,
+ sdhost->pcictrl_mmiobase + VIA_CRDR_PCIINTCTRL);
+ writeb(VIA_CRDR_PCITMOCTRL_1024MS,
+ sdhost->pcictrl_mmiobase + VIA_CRDR_PCITMOCTRL);
+
+ mmc_add_host(mmc);
+
+ return 0;
+
+unmap:
+ iounmap(sdhost->mmiobase);
+free_mmc_host:
+ dev_set_drvdata(&pcidev->dev, NULL);
+ mmc_free_host(mmc);
+release:
+ pci_release_regions(pcidev);
+disable:
+ pci_disable_device(pcidev);
+
+ return ret;
+}
+
+static void __devexit via_sd_remove(struct pci_dev *pcidev)
+{
+ struct via_crdr_mmc_host *sdhost;
+ u8 gatt;
+
+ pr_info(DRV_NAME
+ ": VIA SDMMC controller at %s [%04x:%04x] has been removed\n",
+ pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
+
+ sdhost = pci_get_drvdata(pcidev);
+
+ tasklet_kill(&sdhost->finish_tasklet);
+
+ if (&sdhost->timer)
+ del_timer_sync(&sdhost->timer);
+
+ mmc_remove_host(sdhost->mmc);
+
+ free_irq(pcidev->irq, sdhost);
+
+ writeb(0x0, sdhost->pcictrl_mmiobase + VIA_CRDR_PCIINTCTRL);
+
+ gatt = readb(sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ gatt &= ~VIA_CRDR_PCICLKGATT_POWOFF;
+ writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+
+ iounmap(sdhost->mmiobase);
+ dev_set_drvdata(&pcidev->dev, NULL);
+ mmc_free_host(sdhost->mmc);
+ pci_release_regions(pcidev);
+ pci_disable_device(pcidev);
+}
+
+#ifdef CONFIG_PM
+
+static void via_init_sdc_pm(struct via_crdr_mmc_host *host)
+{
+ struct sdhcreg *pm_sdhcreg;
+ void __iomem *addrbase;
+ u32 lenreg;
+ u16 status;
+
+ pm_sdhcreg = &(host->pm_sdhc_reg);
+ addrbase = host->sdhc_mmiobase;
+
+ writel(0x0, addrbase + VIA_CRDR_SDINTMASK);
+
+ lenreg = VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN;
+ writel(lenreg, addrbase + VIA_CRDR_SDBLKLEN);
+
+ status = readw(addrbase + VIA_CRDR_SDSTATUS);
+ status &= VIA_CRDR_SDSTS_W1C_MASK;
+ writew(status, addrbase + VIA_CRDR_SDSTATUS);
+
+ status = readw(addrbase + VIA_CRDR_SDSTATUS2);
+ status |= VIA_CRDR_SDSTS_CFE;
+ writew(status, addrbase + VIA_CRDR_SDSTATUS2);
+
+ writel(pm_sdhcreg->sdcontrol_reg, addrbase + VIA_CRDR_SDCTRL);
+ writel(pm_sdhcreg->sdcmdarg_reg, addrbase + VIA_CRDR_SDCARG);
+ writel(pm_sdhcreg->sdintmask_reg, addrbase + VIA_CRDR_SDINTMASK);
+ writel(pm_sdhcreg->sdrsptmo_reg, addrbase + VIA_CRDR_SDRSPTMO);
+ writel(pm_sdhcreg->sdclksel_reg, addrbase + VIA_CRDR_SDCLKSEL);
+ writel(pm_sdhcreg->sdextctrl_reg, addrbase + VIA_CRDR_SDEXTCTRL);
+
+ via_print_pcictrl(host);
+ via_print_sdchc(host);
+}
+
+static int via_sd_suspend(struct pci_dev *pcidev, pm_message_t state)
+{
+ struct via_crdr_mmc_host *host;
+ int ret = 0;
+
+ host = pci_get_drvdata(pcidev);
+
+ via_save_pcictrlreg(host);
+ via_save_sdcreg(host);
+
+ ret = mmc_suspend_host(host->mmc, state);
+
+ pci_save_state(pcidev);
+ pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0);
+ pci_disable_device(pcidev);
+ pci_set_power_state(pcidev, pci_choose_state(pcidev, state));
+
+ return ret;
+}
+
+static int via_sd_resume(struct pci_dev *pcidev)
+{
+ struct via_crdr_mmc_host *sdhost;
+ int ret = 0;
+ u8 gatt;
+
+ sdhost = pci_get_drvdata(pcidev);
+
+ gatt = VIA_CRDR_PCICLKGATT_POWOFF;
+ if (sdhost->power == VIA_CRDR_POW_330)
+ gatt |= VIA_CRDR_PCICLKGATT_POWSEL;
+ writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ msleep(3);
+ gatt |= VIA_CRDR_PCICLKGATT_SFTRST;
+ writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ msleep(3);
+
+ msleep(100);
+
+ pci_set_power_state(pcidev, PCI_D0);
+ pci_restore_state(pcidev);
+ ret = pci_enable_device(pcidev);
+ if (ret)
+ return ret;
+
+ via_restore_pcictrlreg(sdhost);
+ via_init_sdc_pm(sdhost);
+
+ ret = mmc_resume_host(sdhost->mmc);
+
+ return ret;
+}
+
+#else /* CONFIG_PM */
+
+#define via_sd_suspend NULL
+#define via_sd_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct pci_driver via_sd_driver = {
+ .name = DRV_NAME,
+ .id_table = via_ids,
+ .probe = via_sd_probe,
+ .remove = __devexit_p(via_sd_remove),
+ .suspend = via_sd_suspend,
+ .resume = via_sd_resume,
+};
+
+static int __init via_sd_drv_init(void)
+{
+ pr_info(DRV_NAME ": VIA SD/MMC Card Reader driver\n");
+ pr_info(DRV_NAME ": Copyright(c) VIA Technologies Inc.\n");
+
+ return pci_register_driver(&via_sd_driver);
+}
+
+static void __exit via_sd_drv_exit(void)
+{
+ pci_unregister_driver(&via_sd_driver);
+}
+
+module_init(via_sd_drv_init);
+module_exit(via_sd_drv_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("VIA Technologies Inc.");
+MODULE_DESCRIPTION("VIA SD/MMC Card Interface driver");
????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay?ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?


2009-04-10 18:35:35

by Pierre Ossman

[permalink] [raw]
Subject: Re: [Patch 1/1 v5] via-sdmmc: VIA MSP card reader driver support

On Wed, 1 Apr 2009 10:24:02 +0800
[email protected] wrote:

> Hi all,
>
> The following patch provides VIA MSP SD/MMC card reader driver support.
> This patch is based on 2.6.29 kernel.
> Thanks to Pierre's suggestions.
> Please feel free to contact me if any problem. Thanks in advanced.
>
> In addition, the SPEC is available in VX800 Programming guide (Device 13 Function 0) on http://linux.via.com.tw
>

Looking good. There's just a few minor things. See below.

> +
> +nodata:
> + if (cmd->opcode == MMC_STOP_TRANSMISSION)
> + cmdctrl |= VIA_CRDR_SDCTRL_STOP;
> +

I didn't check this part properly the last time. I'm assuming you're
telling the hardware that this is a command that terminates a data
transmission? If so, you cannot check the opcode like that. There might
be other stop commands.

What you need to do is to either pass another parameter to your
function when you're calling it with data->stop, or simply have a test
in there if cmd == data->stop (or mrq->stop, whichever is most
convenient).

> +
> + if (ios->clock >= 40000000)
> + clock = PCI_CLK_48M;
> + else if (ios->clock >= 30000000)
> + clock = PCI_CLK_33M;
> + else if (ios->clock >= 20000000)
> + clock = PCI_CLK_24M;
> + else if (ios->clock >= 15000000)
> + clock = PCI_CLK_16M;
> + else if (ios->clock >= 10000000)
> + clock = PCI_CLK_12M;
> + else if (ios->clock >= 5000000)
> + clock = PCI_CLK_8M;
> + else
> + clock = PCI_CLK_375K;
> +

This looks a bit strange. Why are you not comparing with the clock
frequency you'll be setting?

> +
> + mmc->f_min = VIA_CRDR_MIN_CLOCK;
> + mmc->f_max = VIA_CRDR_MAX_CLOCK;
> + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
> + mmc->caps = MMC_CAP_4_BIT_DATA;

You also need to set the bits stating if the controller supports the
high-speed SD and/or MMC mode, otherwise the core won't go over 25/20
MHz.

Rgds
--
-- Pierre Ossman

Linux kernel, MMC maintainer http://www.kernel.org
rdesktop, core developer http://www.rdesktop.org
TigerVNC, core developer http://www.tigervnc.org

WARNING: This correspondence is being monitored by the
Swedish government. Make sure your server uses encryption
for SMTP traffic and consider using PGP for end-to-end
encryption.

2009-04-10 18:37:41

by Pierre Ossman

[permalink] [raw]
Subject: Re: [Patch 1/1 v5] via-sdmmc: VIA MSP card reader driver support

On Fri, 10 Apr 2009 20:35:20 +0200
Pierre Ossman <[email protected]> wrote:

> On Wed, 1 Apr 2009 10:24:02 +0800
> [email protected] wrote:
>
> > Hi all,
> >
> > The following patch provides VIA MSP SD/MMC card reader driver support.
> > This patch is based on 2.6.29 kernel.
> > Thanks to Pierre's suggestions.
> > Please feel free to contact me if any problem. Thanks in advanced.
> >
> > In addition, the SPEC is available in VX800 Programming guide (Device 13 Function 0) on http://linux.via.com.tw
> >
>
> Looking good. There's just a few minor things. See below.
>

And then there's also the matter of a MAINTAINERS entry so I know who
to shout at if there's any issues with this driver in the future. ;)

Rgds
--
-- Pierre Ossman

Linux kernel, MMC maintainer http://www.kernel.org
rdesktop, core developer http://www.rdesktop.org
TigerVNC, core developer http://www.tigervnc.org

WARNING: This correspondence is being monitored by the
Swedish government. Make sure your server uses encryption
for SMTP traffic and consider using PGP for end-to-end
encryption.

2009-04-21 17:34:36

by JosephChan

[permalink] [raw]
Subject: RE: [Patch 1/1 v5] via-sdmmc: VIA MSP card reader driver support

Pierre,

Sorry for the late reply due to my HDD was crashed few days ago.
We will do what you suggest in next release. Please also see the reply in lines.
Thanks.

BRs,
Joseph

-----Original Message-----
From: Pierre Ossman [mailto:[email protected]]
>> +nodata:
>> + if (cmd->opcode == MMC_STOP_TRANSMISSION)
>> + cmdctrl |= VIA_CRDR_SDCTRL_STOP;
> >+

>I didn't check this part properly the last time. I'm assuming you're telling the hardware that this is a command that terminates a data transmission? If so, you cannot check the opcode like that. There might be other stop commands.
>What you need to do is to either pass another parameter to your function when you're calling it with data->stop, or simply have a test in there if cmd == data->stop (or mrq->stop, whichever is most convenient).

OK, we will change to
if(cmd == host->mrq->stop)
cmdctrl |= VIA_CRDR_SDCTRL_STOP;

>> + else if (ios->clock >= 5000000)
>> + clock = PCI_CLK_8M;
>>+ else
>>+ clock = PCI_CLK_375K;
>>+

> This looks a bit strange. Why are you not comparing with the clock frequency you'll be setting?

Do you mean that we should check the current clock frequency before setting? But our engineer thinks that the following lines can do that work normally too:
Any comment?

else if (ios->clock >= 5000000)
clock = PCI_CLK_8M;
else
clock = PCI_CLK_375K;

addrbase = host->pcictrl_mmiobase;

if (readb(addrbase + VIA_CRDR_PCISDCCLK) != clock)
writeb(clock, addrbase + VIA_CRDR_PCISDCCLK);


>> +
>> + mmc->f_min = VIA_CRDR_MIN_CLOCK;
>> + mmc->f_max = VIA_CRDR_MAX_CLOCK;
>> + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
>> + mmc->caps = MMC_CAP_4_BIT_DATA;

> You also need to set the bits stating if the controller supports the high-speed SD and/or MMC mode, otherwise the core won't go over 25/20 MHz.


OK, we will add the following line in the via_init_mmc_host function:

mmc->caps |= MMC_CAP_MMC_HIGHSPEED |MMC_CAP_SD_HIGHSPEED;

And, we will add the following source code to the via_sdc_set_ios function:

org_data = readl(addrbase + VIA_CRDR_SDEXTCTRL);

if ((ios->timing == MMC_TIMING_SD_HS) || (ios->timing == MMC_TIMING_MMC_HS))
org_data |= VIA_CRDR_SDEXTCTRL_HISPD;
else
org_data &= ~VIA_CRDR_SDEXTCTRL_HISPD;

writel(org_data, addrbase + VIA_CRDR_SDEXTCTRL);
????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay?ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?

2009-04-28 19:50:00

by Pierre Ossman

[permalink] [raw]
Subject: Re: [Patch 1/1 v5] via-sdmmc: VIA MSP card reader driver support

On Wed, 22 Apr 2009 01:35:29 +0800
[email protected] wrote:

> -----Original Message-----
> From: Pierre Ossman [mailto:[email protected]]
> >> + else if (ios->clock >= 5000000)
> >> + clock = PCI_CLK_8M;
> >>+ else
> >>+ clock = PCI_CLK_375K;
> >>+
>
> > This looks a bit strange. Why are you not comparing with the clock frequency you'll be setting?
>
> Do you mean that we should check the current clock frequency before setting?

No. My point was that you compare with, for example, 5 MHz, but then
you set the clock to 8 MHz. This is very dangerous as you'll most
likely overclock things.


>
> > You also need to set the bits stating if the controller supports the high-speed SD and/or MMC mode, otherwise the core won't go over 25/20 MHz.
>
>
> OK, we will add the following line in the via_init_mmc_host function:
>
> mmc->caps |= MMC_CAP_MMC_HIGHSPEED |MMC_CAP_SD_HIGHSPEED;
>

You sure the controller handles MMC high-speed timings though? They are
different from SD high-speed, which is why there are two separate caps
bits.

Rgds
--
-- Pierre Ossman

Linux kernel, MMC maintainer http://www.kernel.org
rdesktop, core developer http://www.rdesktop.org
TigerVNC, core developer http://www.tigervnc.org

WARNING: This correspondence is being monitored by the
Swedish government. Make sure your server uses encryption
for SMTP traffic and consider using PGP for end-to-end
encryption.