Hi Linus,
would you please include following driver, thanks.
Kind regards,
peter
--
Acerhdf is a driver for Acer Aspire One netbooks. It allows
to access the temperature sensor and to control the fan.
Signed-off-by: Peter Feuerer <[email protected]>
Signed-off-by: Andreas Mohr <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
---
diff --git a/MAINTAINERS b/MAINTAINERS
index dc226e7..aea0ec2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -230,6 +230,13 @@ L: [email protected]
S: Maintained
F: drivers/net/acenic*
+ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
+P: Peter Feuerer
+M: [email protected]
+W: http://piie.net/?section=acerhdf
+S: Maintained
+F: drivers/platform/x86/acerhdf.c
+
ACER WMI LAPTOP EXTRAS
P: Carlos Corbacho
M: [email protected]
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index c682ac5..5613483 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -34,6 +34,23 @@ config ACER_WMI
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
+config ACERHDF
+ tristate "Acer Aspire One temperature and fan driver"
+ depends on THERMAL && THERMAL_HWMON && ACPI
+ ---help---
+ This is a driver for Acer Aspire One netbooks. It allows to access
+ the temperature sensor and to control the fan.
+
+ After loading this driver the BIOS is still in control of the fan.
+ To let the kernel handle the fan, do:
+ echo -n enabled > /sys/class/thermal/thermal_zone0/mode
+
+ For more information about this driver see
+ <http://piie.net/files/acerhdf_README.txt>
+
+ If you have an Acer Aspire One netbook, say Y or M
+ here.
+
config ASUS_LAPTOP
tristate "Asus Laptop Extras (EXPERIMENTAL)"
depends on ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index e40c7bd..641b8bf 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o
obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_DELL_WMI) += dell-wmi.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
+obj-$(CONFIG_ACERHDF) += acerhdf.o
obj-$(CONFIG_HP_WMI) += hp-wmi.o
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
new file mode 100644
index 0000000..bdfee17
--- /dev/null
+++ b/drivers/platform/x86/acerhdf.c
@@ -0,0 +1,602 @@
+/*
+ * acerhdf - A driver which monitors the temperature
+ * of the aspire one netbook, turns on/off the fan
+ * as soon as the upper/lower threshold is reached.
+ *
+ * (C) 2009 - Peter Feuerer peter (a) piie.net
+ * http://piie.net
+ * 2009 Borislav Petkov <[email protected]>
+ *
+ * Inspired by and many thanks to:
+ * o acerfand - Rachel Greenham
+ * o acer_ec.pl - Michael Kurz michi.kurz (at) googlemail.com
+ * - Petr Tomasek tomasek (#) etf,cuni,cz
+ * - Carlos Corbacho cathectic (at) gmail.com
+ * o lkml - Matthew Garrett
+ * - Borislav Petkov
+ * - Andreas Mohr
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define pr_fmt(fmt) "acerhdf: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/dmi.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/sched.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+
+/*
+ * The driver is started with "kernel mode off" by default. That means, the BIOS
+ * is still in control of the fan. In this mode the driver allows to read the
+ * temperature of the cpu and a userspace tool may take over control of the fan.
+ * If the driver is switched to "kernel mode" (e.g. via module parameter) the
+ * driver is in full control of the fan. If you want the module to be started in
+ * kernel mode by default, define the following:
+ */
+#undef START_IN_KERNEL_MODE
+
+#define DRV_VER "0.5.13"
+
+/*
+ * According to the Atom N270 datasheet,
+ * (http://download.intel.com/design/processor/datashts/320032.pdf) the
+ * CPU's optimal operating limits denoted in junction temperature as
+ * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
+ * assume 89?C is critical temperature.
+ */
+#define ACERHDF_TEMP_CRIT 89
+#define ACERHDF_FAN_OFF 0
+#define ACERHDF_FAN_AUTO 1
+
+/*
+ * No matter what value the user puts into the fanon variable, turn on the fan
+ * at 80 degree Celsius to prevent hardware damage
+ */
+#define ACERHDF_MAX_FANON 80
+
+/*
+ * Maximum interval between two temperature checks is 15 seconds, as the die
+ * can get hot really fast under heavy load (plus we shouldn't forget about
+ * possible impact of _external_ aggressive sources such as heaters, sun etc.)
+ */
+#define ACERHDF_MAX_INTERVAL 15
+
+#ifdef START_IN_KERNEL_MODE
+static int kernelmode = 1;
+#else
+static int kernelmode;
+#endif
+
+static unsigned int interval = 10;
+static unsigned int fanon = 63;
+static unsigned int fanoff = 58;
+static unsigned int verbose;
+static unsigned int fanstate = ACERHDF_FAN_AUTO;
+static char force_bios[16];
+static unsigned int prev_interval;
+struct thermal_zone_device *thz_dev;
+struct thermal_cooling_device *cl_dev;
+struct platform_device *acerhdf_dev;
+
+module_param(kernelmode, uint, 0);
+MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
+module_param(interval, uint, 0600);
+MODULE_PARM_DESC(interval, "Polling interval of temperature check");
+module_param(fanon, uint, 0600);
+MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature");
+module_param(fanoff, uint, 0600);
+MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature");
+module_param(verbose, uint, 0600);
+MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
+module_param_string(force_bios, force_bios, 16, 0);
+MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check");
+
+/* BIOS settings */
+struct bios_settings_t {
+ const char *vendor;
+ const char *version;
+ unsigned char fanreg;
+ unsigned char tempreg;
+ unsigned char fancmd[2]; /* fan off and auto commands */
+};
+
+/* Register addresses and values for different BIOS versions */
+static const struct bios_settings_t bios_tbl[] = {
+ {"Acer", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
+ {"Gateway", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
+ {"Packard Bell", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
+ {"", "", 0, 0, {0, 0} }
+};
+
+static const struct bios_settings_t *bios_cfg __read_mostly;
+
+
+static int acerhdf_get_temp(int *temp)
+{
+ u8 read_temp;
+
+ if (ec_read(bios_cfg->tempreg, &read_temp))
+ return -EINVAL;
+
+ *temp = read_temp;
+
+ return 0;
+}
+
+static int acerhdf_get_fanstate(int *state)
+{
+ u8 fan;
+ bool tmp;
+
+ if (ec_read(bios_cfg->fanreg, &fan))
+ return -EINVAL;
+
+ tmp = (fan == bios_cfg->fancmd[ACERHDF_FAN_OFF]);
+ *state = tmp ? ACERHDF_FAN_OFF : ACERHDF_FAN_AUTO;
+
+ return 0;
+}
+
+static void acerhdf_change_fanstate(int state)
+{
+ unsigned char cmd;
+
+ if (verbose)
+ pr_notice("fan %s\n", (state == ACERHDF_FAN_OFF) ?
+ "OFF" : "ON");
+
+ if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {
+ pr_err("invalid fan state %d requested, setting to auto!\n",
+ state);
+ state = ACERHDF_FAN_AUTO;
+ }
+
+ cmd = bios_cfg->fancmd[state];
+ fanstate = state;
+
+ ec_write(bios_cfg->fanreg, cmd);
+}
+
+static void acerhdf_check_param(struct thermal_zone_device *thermal)
+{
+ if (fanon > ACERHDF_MAX_FANON) {
+ pr_err("fanon temperature too high, set to %d\n",
+ ACERHDF_MAX_FANON);
+ fanon = ACERHDF_MAX_FANON;
+ }
+
+ if (kernelmode && prev_interval != interval) {
+ if (interval > ACERHDF_MAX_INTERVAL) {
+ pr_err("interval too high, set to %d\n",
+ ACERHDF_MAX_INTERVAL);
+ interval = ACERHDF_MAX_INTERVAL;
+ }
+ if (verbose)
+ pr_notice("interval changed to: %d\n",
+ interval);
+ thermal->polling_delay = interval*1000;
+ prev_interval = interval;
+ }
+}
+
+/*
+ * This is the thermal zone callback which does the delayed polling of the fan
+ * state. We do check /sysfs-originating settings here in acerhdf_check_param()
+ * as late as the polling interval is since we can't do that in the respective
+ * accessors of the module parameters.
+ */
+static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal,
+ unsigned long *t)
+{
+ int temp, err = 0;
+
+ acerhdf_check_param(thermal);
+
+ err = acerhdf_get_temp(&temp);
+ if (err)
+ return err;
+
+ if (verbose)
+ pr_notice("temp %d\n", temp);
+
+ *t = temp;
+ return 0;
+}
+
+static int acerhdf_bind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ /* if the cooling device is the one from acerhdf bind it */
+ if (cdev != cl_dev)
+ return 0;
+
+ if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) {
+ pr_err("error binding cooling dev\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int acerhdf_unbind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ if (cdev != cl_dev)
+ return 0;
+
+ if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
+ pr_err("error unbinding cooling dev\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static inline void acerhdf_revert_to_bios_mode(void)
+{
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ kernelmode = 0;
+ if (thz_dev)
+ thz_dev->polling_delay = 0;
+ pr_notice("kernel mode fan control OFF\n");
+}
+static inline void acerhdf_enable_kernelmode(void)
+{
+ kernelmode = 1;
+
+ thz_dev->polling_delay = interval*1000;
+ thermal_zone_device_update(thz_dev);
+ pr_notice("kernel mode fan control ON\n");
+}
+
+static int acerhdf_get_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode *mode)
+{
+ if (verbose)
+ pr_notice("kernel mode fan control %d\n", kernelmode);
+
+ *mode = (kernelmode) ? THERMAL_DEVICE_ENABLED
+ : THERMAL_DEVICE_DISABLED;
+
+ return 0;
+}
+
+/*
+ * set operation mode;
+ * enabled: the thermal layer of the kernel takes care about
+ * the temperature and the fan.
+ * disabled: the BIOS takes control of the fan.
+ */
+static int acerhdf_set_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode mode)
+{
+ if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
+ acerhdf_revert_to_bios_mode();
+ else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
+ acerhdf_enable_kernelmode();
+
+ return 0;
+}
+
+static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
+ enum thermal_trip_type *type)
+{
+ if (trip == 0)
+ *type = THERMAL_TRIP_ACTIVE;
+
+ return 0;
+}
+
+static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
+ unsigned long *temp)
+{
+ if (trip == 0)
+ *temp = fanon;
+
+ return 0;
+}
+
+static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
+ unsigned long *temperature)
+{
+ *temperature = ACERHDF_TEMP_CRIT;
+ return 0;
+}
+
+/* bind callback functions to thermalzone */
+struct thermal_zone_device_ops acerhdf_dev_ops = {
+ .bind = acerhdf_bind,
+ .unbind = acerhdf_unbind,
+ .get_temp = acerhdf_get_ec_temp,
+ .get_mode = acerhdf_get_mode,
+ .set_mode = acerhdf_set_mode,
+ .get_trip_type = acerhdf_get_trip_type,
+ .get_trip_temp = acerhdf_get_trip_temp,
+ .get_crit_temp = acerhdf_get_crit_temp,
+};
+
+
+/*
+ * cooling device callback functions
+ * get maximal fan cooling state
+ */
+static int acerhdf_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ *state = 1;
+
+ return 0;
+}
+
+static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ int err = 0, tmp;
+
+ err = acerhdf_get_fanstate(&tmp);
+ if (err)
+ return err;
+
+ *state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0;
+ return 0;
+}
+
+/* change current fan state - is overwritten when running in kernel mode */
+static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ int cur_temp, cur_state, err = 0;
+
+ if (!kernelmode)
+ return 0;
+
+ err = acerhdf_get_temp(&cur_temp);
+ if (err) {
+ pr_err("error reading temperature, hand off control to BIOS\n");
+ goto err_out;
+ }
+
+ err = acerhdf_get_fanstate(&cur_state);
+ if (err) {
+ pr_err("error reading fan state, hand off control to BIOS\n");
+ goto err_out;
+ }
+
+ if (state == 0) {
+ /* turn fan off only if below fanoff temperature */
+ if ((cur_state == ACERHDF_FAN_AUTO) &&
+ (cur_temp < fanoff))
+ acerhdf_change_fanstate(ACERHDF_FAN_OFF);
+ } else {
+ if (cur_state == ACERHDF_FAN_OFF)
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ }
+ return 0;
+
+err_out:
+ acerhdf_revert_to_bios_mode();
+ return -EINVAL;
+}
+
+/* bind fan callbacks to fan device */
+struct thermal_cooling_device_ops acerhdf_cooling_ops = {
+ .get_max_state = acerhdf_get_max_state,
+ .get_cur_state = acerhdf_get_cur_state,
+ .set_cur_state = acerhdf_set_cur_state,
+};
+
+/* suspend / resume functionality */
+static int acerhdf_suspend(struct platform_device *dev, pm_message_t state)
+{
+ if (kernelmode)
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+
+ if (verbose)
+ pr_notice("going suspend\n");
+
+ return 0;
+}
+
+static int acerhdf_resume(struct platform_device *device)
+{
+ if (verbose)
+ pr_notice("resuming\n");
+
+ return 0;
+}
+
+static int __devinit acerhdf_probe(struct platform_device *device)
+{
+ return 0;
+}
+
+static int acerhdf_remove(struct platform_device *device)
+{
+ return 0;
+}
+
+struct platform_driver acerhdf_drv = {
+ .driver = {
+ .name = "acerhdf",
+ .owner = THIS_MODULE,
+ },
+ .probe = acerhdf_probe,
+ .remove = acerhdf_remove,
+ .suspend = acerhdf_suspend,
+ .resume = acerhdf_resume,
+};
+
+
+/* check hardware */
+static int acerhdf_check_hardware(void)
+{
+ char const *vendor, *version, *product;
+ int i;
+
+ /* get BIOS data */
+ vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ version = dmi_get_system_info(DMI_BIOS_VERSION);
+ product = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+ pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
+
+ if (!force_bios[0]) {
+ if (strncmp(product, "AO", 2)) {
+ pr_err("no Aspire One hardware found\n");
+ return -EINVAL;
+ }
+ } else {
+ pr_info("forcing BIOS version: %s\n", version);
+ version = force_bios;
+ kernelmode = 0;
+ }
+
+ if (verbose)
+ pr_info("BIOS info: %s %s, product: %s\n",
+ vendor, version, product);
+
+ /* search BIOS version and vendor in BIOS settings table */
+ for (i = 0; bios_tbl[i].version[0]; i++) {
+ if (!strcmp(bios_tbl[i].vendor, vendor) &&
+ !strcmp(bios_tbl[i].version, version)) {
+ bios_cfg = &bios_tbl[i];
+ break;
+ }
+ }
+
+ if (!bios_cfg) {
+ pr_err("unknown (unsupported) BIOS version %s/%s, "
+ "please report, aborting!\n", vendor, version);
+ return -EINVAL;
+ }
+
+ /*
+ * if started with kernel mode off, prevent the kernel from switching
+ * off the fan
+ */
+ if (!kernelmode) {
+ pr_notice("Fan control off, to enable do:\n");
+ pr_notice("echo -n \"enabled\" > "
+ "/sys/class/thermal/thermal_zone0/mode\n");
+ }
+
+ return 0;
+}
+
+static int acerhdf_register_platform(void)
+{
+ int err = 0;
+
+ err = platform_driver_register(&acerhdf_drv);
+ if (err)
+ return err;
+
+ acerhdf_dev = platform_device_alloc("acerhdf", -1);
+ platform_device_add(acerhdf_dev);
+
+ return 0;
+}
+
+static void acerhdf_unregister_platform(void)
+{
+ if (!acerhdf_dev)
+ return;
+
+ platform_device_del(acerhdf_dev);
+ platform_driver_unregister(&acerhdf_drv);
+}
+
+static int acerhdf_register_thermal(void)
+{
+ cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
+ &acerhdf_cooling_ops);
+
+ if (IS_ERR(cl_dev))
+ return -EINVAL;
+
+ thz_dev = thermal_zone_device_register("acerhdf", 1, NULL,
+ &acerhdf_dev_ops, 0, 0, 0,
+ (kernelmode) ? interval*1000 : 0);
+ if (IS_ERR(thz_dev))
+ return -EINVAL;
+
+ return 0;
+}
+
+static void acerhdf_unregister_thermal(void)
+{
+ if (cl_dev) {
+ thermal_cooling_device_unregister(cl_dev);
+ cl_dev = NULL;
+ }
+
+ if (thz_dev) {
+ thermal_zone_device_unregister(thz_dev);
+ thz_dev = NULL;
+ }
+}
+
+static int __init acerhdf_init(void)
+{
+ int err = 0;
+
+ err = acerhdf_check_hardware();
+ if (err)
+ goto out_err;
+
+ err = acerhdf_register_platform();
+ if (err)
+ goto err_unreg;
+
+ err = acerhdf_register_thermal();
+ if (err)
+ goto err_unreg;
+
+ return 0;
+
+err_unreg:
+ acerhdf_unregister_thermal();
+ acerhdf_unregister_platform();
+
+out_err:
+ return -ENODEV;
+}
+
+static void __exit acerhdf_exit(void)
+{
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ acerhdf_unregister_thermal();
+ acerhdf_unregister_platform();
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter Feuerer");
+MODULE_DESCRIPTION("Aspire One temperature and fan driver");
+MODULE_ALIAS("dmi:*:*Acer*:*:");
+MODULE_ALIAS("dmi:*:*Gateway*:*:");
+MODULE_ALIAS("dmi:*:*Packard Bell*:*:");
+
+module_init(acerhdf_init);
+module_exit(acerhdf_exit);
Hi,
On Sun, Jun 21, 2009 at 06:53:03PM +0200, Peter Feuerer wrote:
> Hi Linus,
>
> would you please include following driver, thanks.
a quick
git log drivers/platform/x86/
shows that Len should be picking that one up.
@Len: ping?
>
> Kind regards,
> peter
>
> --
> Acerhdf is a driver for Acer Aspire One netbooks. It allows
> to access the temperature sensor and to control the fan.
>
> Signed-off-by: Peter Feuerer <[email protected]>
> Signed-off-by: Andreas Mohr <[email protected]>
> Signed-off-by: Borislav Petkov <[email protected]>
> ---
> diff --git a/MAINTAINERS b/MAINTAINERS
> index dc226e7..aea0ec2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -230,6 +230,13 @@ L: [email protected]
> S: Maintained
> F: drivers/net/acenic*
>
> +ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
> +P: Peter Feuerer
> +M: [email protected]
> +W: http://piie.net/?section=acerhdf
> +S: Maintained
> +F: drivers/platform/x86/acerhdf.c
> +
> ACER WMI LAPTOP EXTRAS
> P: Carlos Corbacho
> M: [email protected]
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index c682ac5..5613483 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -34,6 +34,23 @@ config ACER_WMI
> If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
> here.
>
> +config ACERHDF
> + tristate "Acer Aspire One temperature and fan driver"
> + depends on THERMAL && THERMAL_HWMON && ACPI
> + ---help---
> + This is a driver for Acer Aspire One netbooks. It allows to access
> + the temperature sensor and to control the fan.
> +
> + After loading this driver the BIOS is still in control of the fan.
> + To let the kernel handle the fan, do:
> + echo -n enabled > /sys/class/thermal/thermal_zone0/mode
> +
> + For more information about this driver see
> + <http://piie.net/files/acerhdf_README.txt>
> +
> + If you have an Acer Aspire One netbook, say Y or M
> + here.
> +
> config ASUS_LAPTOP
> tristate "Asus Laptop Extras (EXPERIMENTAL)"
> depends on ACPI
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index e40c7bd..641b8bf 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o
> obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
> obj-$(CONFIG_DELL_WMI) += dell-wmi.o
> obj-$(CONFIG_ACER_WMI) += acer-wmi.o
> +obj-$(CONFIG_ACERHDF) += acerhdf.o
> obj-$(CONFIG_HP_WMI) += hp-wmi.o
> obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
> obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
> diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
> new file mode 100644
> index 0000000..bdfee17
> --- /dev/null
> +++ b/drivers/platform/x86/acerhdf.c
> @@ -0,0 +1,602 @@
> +/*
> + * acerhdf - A driver which monitors the temperature
> + * of the aspire one netbook, turns on/off the fan
> + * as soon as the upper/lower threshold is reached.
> + *
> + * (C) 2009 - Peter Feuerer peter (a) piie.net
> + * http://piie.net
> + * 2009 Borislav Petkov <[email protected]>
> + *
> + * Inspired by and many thanks to:
> + * o acerfand - Rachel Greenham
> + * o acer_ec.pl - Michael Kurz michi.kurz (at) googlemail.com
> + * - Petr Tomasek tomasek (#) etf,cuni,cz
> + * - Carlos Corbacho cathectic (at) gmail.com
> + * o lkml - Matthew Garrett
> + * - Borislav Petkov
> + * - Andreas Mohr
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +
> +#define pr_fmt(fmt) "acerhdf: " fmt
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/fs.h>
> +#include <linux/dmi.h>
> +#include <acpi/acpi_drivers.h>
> +#include <linux/sched.h>
> +#include <linux/thermal.h>
> +#include <linux/platform_device.h>
> +
> +/*
> + * The driver is started with "kernel mode off" by default. That means, the BIOS
> + * is still in control of the fan. In this mode the driver allows to read the
> + * temperature of the cpu and a userspace tool may take over control of the fan.
> + * If the driver is switched to "kernel mode" (e.g. via module parameter) the
> + * driver is in full control of the fan. If you want the module to be started in
> + * kernel mode by default, define the following:
> + */
> +#undef START_IN_KERNEL_MODE
> +
> +#define DRV_VER "0.5.13"
> +
> +/*
> + * According to the Atom N270 datasheet,
> + * (http://download.intel.com/design/processor/datashts/320032.pdf) the
> + * CPU's optimal operating limits denoted in junction temperature as
> + * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
> + * assume 89°C is critical temperature.
> + */
> +#define ACERHDF_TEMP_CRIT 89
> +#define ACERHDF_FAN_OFF 0
> +#define ACERHDF_FAN_AUTO 1
> +
> +/*
> + * No matter what value the user puts into the fanon variable, turn on the fan
> + * at 80 degree Celsius to prevent hardware damage
> + */
> +#define ACERHDF_MAX_FANON 80
> +
> +/*
> + * Maximum interval between two temperature checks is 15 seconds, as the die
> + * can get hot really fast under heavy load (plus we shouldn't forget about
> + * possible impact of _external_ aggressive sources such as heaters, sun etc.)
> + */
> +#define ACERHDF_MAX_INTERVAL 15
> +
> +#ifdef START_IN_KERNEL_MODE
> +static int kernelmode = 1;
> +#else
> +static int kernelmode;
> +#endif
> +
> +static unsigned int interval = 10;
> +static unsigned int fanon = 63;
> +static unsigned int fanoff = 58;
> +static unsigned int verbose;
> +static unsigned int fanstate = ACERHDF_FAN_AUTO;
> +static char force_bios[16];
> +static unsigned int prev_interval;
> +struct thermal_zone_device *thz_dev;
> +struct thermal_cooling_device *cl_dev;
> +struct platform_device *acerhdf_dev;
> +
> +module_param(kernelmode, uint, 0);
> +MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
> +module_param(interval, uint, 0600);
> +MODULE_PARM_DESC(interval, "Polling interval of temperature check");
> +module_param(fanon, uint, 0600);
> +MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature");
> +module_param(fanoff, uint, 0600);
> +MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature");
> +module_param(verbose, uint, 0600);
> +MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
> +module_param_string(force_bios, force_bios, 16, 0);
> +MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check");
> +
> +/* BIOS settings */
> +struct bios_settings_t {
> + const char *vendor;
> + const char *version;
> + unsigned char fanreg;
> + unsigned char tempreg;
> + unsigned char fancmd[2]; /* fan off and auto commands */
> +};
> +
> +/* Register addresses and values for different BIOS versions */
> +static const struct bios_settings_t bios_tbl[] = {
> + {"Acer", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
> + {"Acer", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
> + {"Acer", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
> + {"Acer", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
> + {"Acer", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
> + {"Acer", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
> + {"Acer", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
> + {"Acer", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
> + {"Gateway", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
> + {"Packard Bell", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
> + {"", "", 0, 0, {0, 0} }
> +};
> +
> +static const struct bios_settings_t *bios_cfg __read_mostly;
> +
> +
> +static int acerhdf_get_temp(int *temp)
> +{
> + u8 read_temp;
> +
> + if (ec_read(bios_cfg->tempreg, &read_temp))
> + return -EINVAL;
> +
> + *temp = read_temp;
> +
> + return 0;
> +}
> +
> +static int acerhdf_get_fanstate(int *state)
> +{
> + u8 fan;
> + bool tmp;
> +
> + if (ec_read(bios_cfg->fanreg, &fan))
> + return -EINVAL;
> +
> + tmp = (fan == bios_cfg->fancmd[ACERHDF_FAN_OFF]);
> + *state = tmp ? ACERHDF_FAN_OFF : ACERHDF_FAN_AUTO;
> +
> + return 0;
> +}
> +
> +static void acerhdf_change_fanstate(int state)
> +{
> + unsigned char cmd;
> +
> + if (verbose)
> + pr_notice("fan %s\n", (state == ACERHDF_FAN_OFF) ?
> + "OFF" : "ON");
> +
> + if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {
> + pr_err("invalid fan state %d requested, setting to auto!\n",
> + state);
> + state = ACERHDF_FAN_AUTO;
> + }
> +
> + cmd = bios_cfg->fancmd[state];
> + fanstate = state;
> +
> + ec_write(bios_cfg->fanreg, cmd);
> +}
> +
> +static void acerhdf_check_param(struct thermal_zone_device *thermal)
> +{
> + if (fanon > ACERHDF_MAX_FANON) {
> + pr_err("fanon temperature too high, set to %d\n",
> + ACERHDF_MAX_FANON);
> + fanon = ACERHDF_MAX_FANON;
> + }
> +
> + if (kernelmode && prev_interval != interval) {
> + if (interval > ACERHDF_MAX_INTERVAL) {
> + pr_err("interval too high, set to %d\n",
> + ACERHDF_MAX_INTERVAL);
> + interval = ACERHDF_MAX_INTERVAL;
> + }
> + if (verbose)
> + pr_notice("interval changed to: %d\n",
> + interval);
> + thermal->polling_delay = interval*1000;
> + prev_interval = interval;
> + }
> +}
> +
> +/*
> + * This is the thermal zone callback which does the delayed polling of the fan
> + * state. We do check /sysfs-originating settings here in acerhdf_check_param()
> + * as late as the polling interval is since we can't do that in the respective
> + * accessors of the module parameters.
> + */
> +static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal,
> + unsigned long *t)
> +{
> + int temp, err = 0;
> +
> + acerhdf_check_param(thermal);
> +
> + err = acerhdf_get_temp(&temp);
> + if (err)
> + return err;
> +
> + if (verbose)
> + pr_notice("temp %d\n", temp);
> +
> + *t = temp;
> + return 0;
> +}
> +
> +static int acerhdf_bind(struct thermal_zone_device *thermal,
> + struct thermal_cooling_device *cdev)
> +{
> + /* if the cooling device is the one from acerhdf bind it */
> + if (cdev != cl_dev)
> + return 0;
> +
> + if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) {
> + pr_err("error binding cooling dev\n");
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static int acerhdf_unbind(struct thermal_zone_device *thermal,
> + struct thermal_cooling_device *cdev)
> +{
> + if (cdev != cl_dev)
> + return 0;
> +
> + if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
> + pr_err("error unbinding cooling dev\n");
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static inline void acerhdf_revert_to_bios_mode(void)
> +{
> + acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
> + kernelmode = 0;
> + if (thz_dev)
> + thz_dev->polling_delay = 0;
> + pr_notice("kernel mode fan control OFF\n");
> +}
> +static inline void acerhdf_enable_kernelmode(void)
> +{
> + kernelmode = 1;
> +
> + thz_dev->polling_delay = interval*1000;
> + thermal_zone_device_update(thz_dev);
> + pr_notice("kernel mode fan control ON\n");
> +}
> +
> +static int acerhdf_get_mode(struct thermal_zone_device *thermal,
> + enum thermal_device_mode *mode)
> +{
> + if (verbose)
> + pr_notice("kernel mode fan control %d\n", kernelmode);
> +
> + *mode = (kernelmode) ? THERMAL_DEVICE_ENABLED
> + : THERMAL_DEVICE_DISABLED;
> +
> + return 0;
> +}
> +
> +/*
> + * set operation mode;
> + * enabled: the thermal layer of the kernel takes care about
> + * the temperature and the fan.
> + * disabled: the BIOS takes control of the fan.
> + */
> +static int acerhdf_set_mode(struct thermal_zone_device *thermal,
> + enum thermal_device_mode mode)
> +{
> + if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
> + acerhdf_revert_to_bios_mode();
> + else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
> + acerhdf_enable_kernelmode();
> +
> + return 0;
> +}
> +
> +static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
> + enum thermal_trip_type *type)
> +{
> + if (trip == 0)
> + *type = THERMAL_TRIP_ACTIVE;
> +
> + return 0;
> +}
> +
> +static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
> + unsigned long *temp)
> +{
> + if (trip == 0)
> + *temp = fanon;
> +
> + return 0;
> +}
> +
> +static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
> + unsigned long *temperature)
> +{
> + *temperature = ACERHDF_TEMP_CRIT;
> + return 0;
> +}
> +
> +/* bind callback functions to thermalzone */
> +struct thermal_zone_device_ops acerhdf_dev_ops = {
> + .bind = acerhdf_bind,
> + .unbind = acerhdf_unbind,
> + .get_temp = acerhdf_get_ec_temp,
> + .get_mode = acerhdf_get_mode,
> + .set_mode = acerhdf_set_mode,
> + .get_trip_type = acerhdf_get_trip_type,
> + .get_trip_temp = acerhdf_get_trip_temp,
> + .get_crit_temp = acerhdf_get_crit_temp,
> +};
> +
> +
> +/*
> + * cooling device callback functions
> + * get maximal fan cooling state
> + */
> +static int acerhdf_get_max_state(struct thermal_cooling_device *cdev,
> + unsigned long *state)
> +{
> + *state = 1;
> +
> + return 0;
> +}
> +
> +static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev,
> + unsigned long *state)
> +{
> + int err = 0, tmp;
> +
> + err = acerhdf_get_fanstate(&tmp);
> + if (err)
> + return err;
> +
> + *state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0;
> + return 0;
> +}
> +
> +/* change current fan state - is overwritten when running in kernel mode */
> +static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
> + unsigned long state)
> +{
> + int cur_temp, cur_state, err = 0;
> +
> + if (!kernelmode)
> + return 0;
> +
> + err = acerhdf_get_temp(&cur_temp);
> + if (err) {
> + pr_err("error reading temperature, hand off control to BIOS\n");
> + goto err_out;
> + }
> +
> + err = acerhdf_get_fanstate(&cur_state);
> + if (err) {
> + pr_err("error reading fan state, hand off control to BIOS\n");
> + goto err_out;
> + }
> +
> + if (state == 0) {
> + /* turn fan off only if below fanoff temperature */
> + if ((cur_state == ACERHDF_FAN_AUTO) &&
> + (cur_temp < fanoff))
> + acerhdf_change_fanstate(ACERHDF_FAN_OFF);
> + } else {
> + if (cur_state == ACERHDF_FAN_OFF)
> + acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
> + }
> + return 0;
> +
> +err_out:
> + acerhdf_revert_to_bios_mode();
> + return -EINVAL;
> +}
> +
> +/* bind fan callbacks to fan device */
> +struct thermal_cooling_device_ops acerhdf_cooling_ops = {
> + .get_max_state = acerhdf_get_max_state,
> + .get_cur_state = acerhdf_get_cur_state,
> + .set_cur_state = acerhdf_set_cur_state,
> +};
> +
> +/* suspend / resume functionality */
> +static int acerhdf_suspend(struct platform_device *dev, pm_message_t state)
> +{
> + if (kernelmode)
> + acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
> +
> + if (verbose)
> + pr_notice("going suspend\n");
> +
> + return 0;
> +}
> +
> +static int acerhdf_resume(struct platform_device *device)
> +{
> + if (verbose)
> + pr_notice("resuming\n");
> +
> + return 0;
> +}
> +
> +static int __devinit acerhdf_probe(struct platform_device *device)
> +{
> + return 0;
> +}
> +
> +static int acerhdf_remove(struct platform_device *device)
> +{
> + return 0;
> +}
> +
> +struct platform_driver acerhdf_drv = {
> + .driver = {
> + .name = "acerhdf",
> + .owner = THIS_MODULE,
> + },
> + .probe = acerhdf_probe,
> + .remove = acerhdf_remove,
> + .suspend = acerhdf_suspend,
> + .resume = acerhdf_resume,
> +};
> +
> +
> +/* check hardware */
> +static int acerhdf_check_hardware(void)
> +{
> + char const *vendor, *version, *product;
> + int i;
> +
> + /* get BIOS data */
> + vendor = dmi_get_system_info(DMI_SYS_VENDOR);
> + version = dmi_get_system_info(DMI_BIOS_VERSION);
> + product = dmi_get_system_info(DMI_PRODUCT_NAME);
> +
> + pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
> +
> + if (!force_bios[0]) {
> + if (strncmp(product, "AO", 2)) {
> + pr_err("no Aspire One hardware found\n");
> + return -EINVAL;
> + }
> + } else {
> + pr_info("forcing BIOS version: %s\n", version);
> + version = force_bios;
> + kernelmode = 0;
> + }
> +
> + if (verbose)
> + pr_info("BIOS info: %s %s, product: %s\n",
> + vendor, version, product);
> +
> + /* search BIOS version and vendor in BIOS settings table */
> + for (i = 0; bios_tbl[i].version[0]; i++) {
> + if (!strcmp(bios_tbl[i].vendor, vendor) &&
> + !strcmp(bios_tbl[i].version, version)) {
> + bios_cfg = &bios_tbl[i];
> + break;
> + }
> + }
> +
> + if (!bios_cfg) {
> + pr_err("unknown (unsupported) BIOS version %s/%s, "
> + "please report, aborting!\n", vendor, version);
> + return -EINVAL;
> + }
> +
> + /*
> + * if started with kernel mode off, prevent the kernel from switching
> + * off the fan
> + */
> + if (!kernelmode) {
> + pr_notice("Fan control off, to enable do:\n");
> + pr_notice("echo -n \"enabled\" > "
> + "/sys/class/thermal/thermal_zone0/mode\n");
> + }
> +
> + return 0;
> +}
> +
> +static int acerhdf_register_platform(void)
> +{
> + int err = 0;
> +
> + err = platform_driver_register(&acerhdf_drv);
> + if (err)
> + return err;
> +
> + acerhdf_dev = platform_device_alloc("acerhdf", -1);
> + platform_device_add(acerhdf_dev);
> +
> + return 0;
> +}
> +
> +static void acerhdf_unregister_platform(void)
> +{
> + if (!acerhdf_dev)
> + return;
> +
> + platform_device_del(acerhdf_dev);
> + platform_driver_unregister(&acerhdf_drv);
> +}
> +
> +static int acerhdf_register_thermal(void)
> +{
> + cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
> + &acerhdf_cooling_ops);
> +
> + if (IS_ERR(cl_dev))
> + return -EINVAL;
> +
> + thz_dev = thermal_zone_device_register("acerhdf", 1, NULL,
> + &acerhdf_dev_ops, 0, 0, 0,
> + (kernelmode) ? interval*1000 : 0);
> + if (IS_ERR(thz_dev))
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static void acerhdf_unregister_thermal(void)
> +{
> + if (cl_dev) {
> + thermal_cooling_device_unregister(cl_dev);
> + cl_dev = NULL;
> + }
> +
> + if (thz_dev) {
> + thermal_zone_device_unregister(thz_dev);
> + thz_dev = NULL;
> + }
> +}
> +
> +static int __init acerhdf_init(void)
> +{
> + int err = 0;
> +
> + err = acerhdf_check_hardware();
> + if (err)
> + goto out_err;
> +
> + err = acerhdf_register_platform();
> + if (err)
> + goto err_unreg;
> +
> + err = acerhdf_register_thermal();
> + if (err)
> + goto err_unreg;
> +
> + return 0;
> +
> +err_unreg:
> + acerhdf_unregister_thermal();
> + acerhdf_unregister_platform();
> +
> +out_err:
> + return -ENODEV;
> +}
> +
> +static void __exit acerhdf_exit(void)
> +{
> + acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
> + acerhdf_unregister_thermal();
> + acerhdf_unregister_platform();
> +}
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Peter Feuerer");
> +MODULE_DESCRIPTION("Aspire One temperature and fan driver");
> +MODULE_ALIAS("dmi:*:*Acer*:*:");
> +MODULE_ALIAS("dmi:*:*Gateway*:*:");
> +MODULE_ALIAS("dmi:*:*Packard Bell*:*:");
> +
> +module_init(acerhdf_init);
> +module_exit(acerhdf_exit);
--
Regards/Gruss,
Boris.
Hi Linus, Len, Boris,
On Mon, 22 Jun 2009 08:33:05 +0200
Borislav Petkov <[email protected]> wrote:
> On Sun, Jun 21, 2009 at 06:53:03PM +0200, Peter Feuerer wrote:
> > Hi Linus,
> >
> > would you please include following driver, thanks.
>
> a quick
>
> git log drivers/platform/x86/
>
> shows that Len should be picking that one up.
>
> @Len: ping?
The previous patch produced a warning while linking.
Please include the new patch or write me a short message if something is wrong with it. Thank you very much!
kind regards,
peter
--
Acerhdf is a driver for Acer Aspire One netbooks. It allows
to access the temperature sensor and to control the fan.
Peter:
- renamed acerhdf_drv to acerhdf_driver as *_drv caused linker warning
Signed-off-by: Peter Feuerer <[email protected]>
Signed-off-by: Andreas Mohr <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
---
diff --git a/MAINTAINERS b/MAINTAINERS
index 1d47043..4112b31 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -230,6 +230,13 @@ L: [email protected]
S: Maintained
F: drivers/net/acenic*
+ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
+P: Peter Feuerer
+M: [email protected]
+W: http://piie.net/?section=acerhdf
+S: Maintained
+F: drivers/platform/x86/acerhdf.c
+
ACER WMI LAPTOP EXTRAS
P: Carlos Corbacho
M: [email protected]
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index c682ac5..5613483 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -34,6 +34,23 @@ config ACER_WMI
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
+config ACERHDF
+ tristate "Acer Aspire One temperature and fan driver"
+ depends on THERMAL && THERMAL_HWMON && ACPI
+ ---help---
+ This is a driver for Acer Aspire One netbooks. It allows to access
+ the temperature sensor and to control the fan.
+
+ After loading this driver the BIOS is still in control of the fan.
+ To let the kernel handle the fan, do:
+ echo -n enabled > /sys/class/thermal/thermal_zone0/mode
+
+ For more information about this driver see
+ <http://piie.net/files/acerhdf_README.txt>
+
+ If you have an Acer Aspire One netbook, say Y or M
+ here.
+
config ASUS_LAPTOP
tristate "Asus Laptop Extras (EXPERIMENTAL)"
depends on ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index e40c7bd..641b8bf 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o
obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_DELL_WMI) += dell-wmi.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
+obj-$(CONFIG_ACERHDF) += acerhdf.o
obj-$(CONFIG_HP_WMI) += hp-wmi.o
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
new file mode 100644
index 0000000..649365d
--- /dev/null
+++ b/drivers/platform/x86/acerhdf.c
@@ -0,0 +1,602 @@
+/*
+ * acerhdf - A driver which monitors the temperature
+ * of the aspire one netbook, turns on/off the fan
+ * as soon as the upper/lower threshold is reached.
+ *
+ * (C) 2009 - Peter Feuerer peter (a) piie.net
+ * http://piie.net
+ * 2009 Borislav Petkov <[email protected]>
+ *
+ * Inspired by and many thanks to:
+ * o acerfand - Rachel Greenham
+ * o acer_ec.pl - Michael Kurz michi.kurz (at) googlemail.com
+ * - Petr Tomasek tomasek (#) etf,cuni,cz
+ * - Carlos Corbacho cathectic (at) gmail.com
+ * o lkml - Matthew Garrett
+ * - Borislav Petkov
+ * - Andreas Mohr
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define pr_fmt(fmt) "acerhdf: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/dmi.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/sched.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+
+/*
+ * The driver is started with "kernel mode off" by default. That means, the BIOS
+ * is still in control of the fan. In this mode the driver allows to read the
+ * temperature of the cpu and a userspace tool may take over control of the fan.
+ * If the driver is switched to "kernel mode" (e.g. via module parameter) the
+ * driver is in full control of the fan. If you want the module to be started in
+ * kernel mode by default, define the following:
+ */
+#undef START_IN_KERNEL_MODE
+
+#define DRV_VER "0.5.14"
+
+/*
+ * According to the Atom N270 datasheet,
+ * (http://download.intel.com/design/processor/datashts/320032.pdf) the
+ * CPU's optimal operating limits denoted in junction temperature as
+ * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
+ * assume 89?C is critical temperature.
+ */
+#define ACERHDF_TEMP_CRIT 89
+#define ACERHDF_FAN_OFF 0
+#define ACERHDF_FAN_AUTO 1
+
+/*
+ * No matter what value the user puts into the fanon variable, turn on the fan
+ * at 80 degree Celsius to prevent hardware damage
+ */
+#define ACERHDF_MAX_FANON 80
+
+/*
+ * Maximum interval between two temperature checks is 15 seconds, as the die
+ * can get hot really fast under heavy load (plus we shouldn't forget about
+ * possible impact of _external_ aggressive sources such as heaters, sun etc.)
+ */
+#define ACERHDF_MAX_INTERVAL 15
+
+#ifdef START_IN_KERNEL_MODE
+static int kernelmode = 1;
+#else
+static int kernelmode;
+#endif
+
+static unsigned int interval = 10;
+static unsigned int fanon = 63;
+static unsigned int fanoff = 58;
+static unsigned int verbose;
+static unsigned int fanstate = ACERHDF_FAN_AUTO;
+static char force_bios[16];
+static unsigned int prev_interval;
+struct thermal_zone_device *thz_dev;
+struct thermal_cooling_device *cl_dev;
+struct platform_device *acerhdf_dev;
+
+module_param(kernelmode, uint, 0);
+MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
+module_param(interval, uint, 0600);
+MODULE_PARM_DESC(interval, "Polling interval of temperature check");
+module_param(fanon, uint, 0600);
+MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature");
+module_param(fanoff, uint, 0600);
+MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature");
+module_param(verbose, uint, 0600);
+MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
+module_param_string(force_bios, force_bios, 16, 0);
+MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check");
+
+/* BIOS settings */
+struct bios_settings_t {
+ const char *vendor;
+ const char *version;
+ unsigned char fanreg;
+ unsigned char tempreg;
+ unsigned char fancmd[2]; /* fan off and auto commands */
+};
+
+/* Register addresses and values for different BIOS versions */
+static const struct bios_settings_t bios_tbl[] = {
+ {"Acer", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
+ {"Gateway", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
+ {"Packard Bell", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
+ {"", "", 0, 0, {0, 0} }
+};
+
+static const struct bios_settings_t *bios_cfg __read_mostly;
+
+
+static int acerhdf_get_temp(int *temp)
+{
+ u8 read_temp;
+
+ if (ec_read(bios_cfg->tempreg, &read_temp))
+ return -EINVAL;
+
+ *temp = read_temp;
+
+ return 0;
+}
+
+static int acerhdf_get_fanstate(int *state)
+{
+ u8 fan;
+ bool tmp;
+
+ if (ec_read(bios_cfg->fanreg, &fan))
+ return -EINVAL;
+
+ tmp = (fan == bios_cfg->fancmd[ACERHDF_FAN_OFF]);
+ *state = tmp ? ACERHDF_FAN_OFF : ACERHDF_FAN_AUTO;
+
+ return 0;
+}
+
+static void acerhdf_change_fanstate(int state)
+{
+ unsigned char cmd;
+
+ if (verbose)
+ pr_notice("fan %s\n", (state == ACERHDF_FAN_OFF) ?
+ "OFF" : "ON");
+
+ if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {
+ pr_err("invalid fan state %d requested, setting to auto!\n",
+ state);
+ state = ACERHDF_FAN_AUTO;
+ }
+
+ cmd = bios_cfg->fancmd[state];
+ fanstate = state;
+
+ ec_write(bios_cfg->fanreg, cmd);
+}
+
+static void acerhdf_check_param(struct thermal_zone_device *thermal)
+{
+ if (fanon > ACERHDF_MAX_FANON) {
+ pr_err("fanon temperature too high, set to %d\n",
+ ACERHDF_MAX_FANON);
+ fanon = ACERHDF_MAX_FANON;
+ }
+
+ if (kernelmode && prev_interval != interval) {
+ if (interval > ACERHDF_MAX_INTERVAL) {
+ pr_err("interval too high, set to %d\n",
+ ACERHDF_MAX_INTERVAL);
+ interval = ACERHDF_MAX_INTERVAL;
+ }
+ if (verbose)
+ pr_notice("interval changed to: %d\n",
+ interval);
+ thermal->polling_delay = interval*1000;
+ prev_interval = interval;
+ }
+}
+
+/*
+ * This is the thermal zone callback which does the delayed polling of the fan
+ * state. We do check /sysfs-originating settings here in acerhdf_check_param()
+ * as late as the polling interval is since we can't do that in the respective
+ * accessors of the module parameters.
+ */
+static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal,
+ unsigned long *t)
+{
+ int temp, err = 0;
+
+ acerhdf_check_param(thermal);
+
+ err = acerhdf_get_temp(&temp);
+ if (err)
+ return err;
+
+ if (verbose)
+ pr_notice("temp %d\n", temp);
+
+ *t = temp;
+ return 0;
+}
+
+static int acerhdf_bind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ /* if the cooling device is the one from acerhdf bind it */
+ if (cdev != cl_dev)
+ return 0;
+
+ if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) {
+ pr_err("error binding cooling dev\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int acerhdf_unbind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ if (cdev != cl_dev)
+ return 0;
+
+ if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
+ pr_err("error unbinding cooling dev\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static inline void acerhdf_revert_to_bios_mode(void)
+{
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ kernelmode = 0;
+ if (thz_dev)
+ thz_dev->polling_delay = 0;
+ pr_notice("kernel mode fan control OFF\n");
+}
+static inline void acerhdf_enable_kernelmode(void)
+{
+ kernelmode = 1;
+
+ thz_dev->polling_delay = interval*1000;
+ thermal_zone_device_update(thz_dev);
+ pr_notice("kernel mode fan control ON\n");
+}
+
+static int acerhdf_get_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode *mode)
+{
+ if (verbose)
+ pr_notice("kernel mode fan control %d\n", kernelmode);
+
+ *mode = (kernelmode) ? THERMAL_DEVICE_ENABLED
+ : THERMAL_DEVICE_DISABLED;
+
+ return 0;
+}
+
+/*
+ * set operation mode;
+ * enabled: the thermal layer of the kernel takes care about
+ * the temperature and the fan.
+ * disabled: the BIOS takes control of the fan.
+ */
+static int acerhdf_set_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode mode)
+{
+ if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
+ acerhdf_revert_to_bios_mode();
+ else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
+ acerhdf_enable_kernelmode();
+
+ return 0;
+}
+
+static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
+ enum thermal_trip_type *type)
+{
+ if (trip == 0)
+ *type = THERMAL_TRIP_ACTIVE;
+
+ return 0;
+}
+
+static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
+ unsigned long *temp)
+{
+ if (trip == 0)
+ *temp = fanon;
+
+ return 0;
+}
+
+static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
+ unsigned long *temperature)
+{
+ *temperature = ACERHDF_TEMP_CRIT;
+ return 0;
+}
+
+/* bind callback functions to thermalzone */
+struct thermal_zone_device_ops acerhdf_dev_ops = {
+ .bind = acerhdf_bind,
+ .unbind = acerhdf_unbind,
+ .get_temp = acerhdf_get_ec_temp,
+ .get_mode = acerhdf_get_mode,
+ .set_mode = acerhdf_set_mode,
+ .get_trip_type = acerhdf_get_trip_type,
+ .get_trip_temp = acerhdf_get_trip_temp,
+ .get_crit_temp = acerhdf_get_crit_temp,
+};
+
+
+/*
+ * cooling device callback functions
+ * get maximal fan cooling state
+ */
+static int acerhdf_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ *state = 1;
+
+ return 0;
+}
+
+static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ int err = 0, tmp;
+
+ err = acerhdf_get_fanstate(&tmp);
+ if (err)
+ return err;
+
+ *state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0;
+ return 0;
+}
+
+/* change current fan state - is overwritten when running in kernel mode */
+static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ int cur_temp, cur_state, err = 0;
+
+ if (!kernelmode)
+ return 0;
+
+ err = acerhdf_get_temp(&cur_temp);
+ if (err) {
+ pr_err("error reading temperature, hand off control to BIOS\n");
+ goto err_out;
+ }
+
+ err = acerhdf_get_fanstate(&cur_state);
+ if (err) {
+ pr_err("error reading fan state, hand off control to BIOS\n");
+ goto err_out;
+ }
+
+ if (state == 0) {
+ /* turn fan off only if below fanoff temperature */
+ if ((cur_state == ACERHDF_FAN_AUTO) &&
+ (cur_temp < fanoff))
+ acerhdf_change_fanstate(ACERHDF_FAN_OFF);
+ } else {
+ if (cur_state == ACERHDF_FAN_OFF)
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ }
+ return 0;
+
+err_out:
+ acerhdf_revert_to_bios_mode();
+ return -EINVAL;
+}
+
+/* bind fan callbacks to fan device */
+struct thermal_cooling_device_ops acerhdf_cooling_ops = {
+ .get_max_state = acerhdf_get_max_state,
+ .get_cur_state = acerhdf_get_cur_state,
+ .set_cur_state = acerhdf_set_cur_state,
+};
+
+/* suspend / resume functionality */
+static int acerhdf_suspend(struct platform_device *dev, pm_message_t state)
+{
+ if (kernelmode)
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+
+ if (verbose)
+ pr_notice("going suspend\n");
+
+ return 0;
+}
+
+static int acerhdf_resume(struct platform_device *device)
+{
+ if (verbose)
+ pr_notice("resuming\n");
+
+ return 0;
+}
+
+static int __devinit acerhdf_probe(struct platform_device *device)
+{
+ return 0;
+}
+
+static int acerhdf_remove(struct platform_device *device)
+{
+ return 0;
+}
+
+static struct platform_driver acerhdf_driver = {
+ .driver = {
+ .name = "acerhdf",
+ .owner = THIS_MODULE,
+ },
+ .probe = acerhdf_probe,
+ .remove = acerhdf_remove,
+ .suspend = acerhdf_suspend,
+ .resume = acerhdf_resume,
+};
+
+
+/* check hardware */
+static int acerhdf_check_hardware(void)
+{
+ char const *vendor, *version, *product;
+ int i;
+
+ /* get BIOS data */
+ vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ version = dmi_get_system_info(DMI_BIOS_VERSION);
+ product = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+ pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
+
+ if (!force_bios[0]) {
+ if (strncmp(product, "AO", 2)) {
+ pr_err("no Aspire One hardware found\n");
+ return -EINVAL;
+ }
+ } else {
+ pr_info("forcing BIOS version: %s\n", version);
+ version = force_bios;
+ kernelmode = 0;
+ }
+
+ if (verbose)
+ pr_info("BIOS info: %s %s, product: %s\n",
+ vendor, version, product);
+
+ /* search BIOS version and vendor in BIOS settings table */
+ for (i = 0; bios_tbl[i].version[0]; i++) {
+ if (!strcmp(bios_tbl[i].vendor, vendor) &&
+ !strcmp(bios_tbl[i].version, version)) {
+ bios_cfg = &bios_tbl[i];
+ break;
+ }
+ }
+
+ if (!bios_cfg) {
+ pr_err("unknown (unsupported) BIOS version %s/%s, "
+ "please report, aborting!\n", vendor, version);
+ return -EINVAL;
+ }
+
+ /*
+ * if started with kernel mode off, prevent the kernel from switching
+ * off the fan
+ */
+ if (!kernelmode) {
+ pr_notice("Fan control off, to enable do:\n");
+ pr_notice("echo -n \"enabled\" > "
+ "/sys/class/thermal/thermal_zone0/mode\n");
+ }
+
+ return 0;
+}
+
+static int acerhdf_register_platform(void)
+{
+ int err = 0;
+
+ err = platform_driver_register(&acerhdf_driver);
+ if (err)
+ return err;
+
+ acerhdf_dev = platform_device_alloc("acerhdf", -1);
+ platform_device_add(acerhdf_dev);
+
+ return 0;
+}
+
+static void acerhdf_unregister_platform(void)
+{
+ if (!acerhdf_dev)
+ return;
+
+ platform_device_del(acerhdf_dev);
+ platform_driver_unregister(&acerhdf_driver);
+}
+
+static int acerhdf_register_thermal(void)
+{
+ cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
+ &acerhdf_cooling_ops);
+
+ if (IS_ERR(cl_dev))
+ return -EINVAL;
+
+ thz_dev = thermal_zone_device_register("acerhdf", 1, NULL,
+ &acerhdf_dev_ops, 0, 0, 0,
+ (kernelmode) ? interval*1000 : 0);
+ if (IS_ERR(thz_dev))
+ return -EINVAL;
+
+ return 0;
+}
+
+static void acerhdf_unregister_thermal(void)
+{
+ if (cl_dev) {
+ thermal_cooling_device_unregister(cl_dev);
+ cl_dev = NULL;
+ }
+
+ if (thz_dev) {
+ thermal_zone_device_unregister(thz_dev);
+ thz_dev = NULL;
+ }
+}
+
+static int __init acerhdf_init(void)
+{
+ int err = 0;
+
+ err = acerhdf_check_hardware();
+ if (err)
+ goto out_err;
+
+ err = acerhdf_register_platform();
+ if (err)
+ goto err_unreg;
+
+ err = acerhdf_register_thermal();
+ if (err)
+ goto err_unreg;
+
+ return 0;
+
+err_unreg:
+ acerhdf_unregister_thermal();
+ acerhdf_unregister_platform();
+
+out_err:
+ return -ENODEV;
+}
+
+static void __exit acerhdf_exit(void)
+{
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ acerhdf_unregister_thermal();
+ acerhdf_unregister_platform();
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter Feuerer");
+MODULE_DESCRIPTION("Aspire One temperature and fan driver");
+MODULE_ALIAS("dmi:*:*Acer*:*:");
+MODULE_ALIAS("dmi:*:*Gateway*:*:");
+MODULE_ALIAS("dmi:*:*Packard Bell*:*:");
+
+module_init(acerhdf_init);
+module_exit(acerhdf_exit);
applied
thanks,
Len Brown, Intel Open Source Technology Center