I see this every time I boot.
Dave
BUG: MAX_STACK_TRACE_ENTRIES too low!
turning off the locking correctness validator.
Pid: 0, comm: swapper Not tainted 2.6.31-0.42.rc2.fc12.i686.PAE #1
Call Trace:
[<c08277f3>] ? printk+0x22/0x37
[<c04759b3>] save_trace+0x89/0xa3
[<c0476410>] mark_lock+0xaf/0x1f6
[<c0476c36>] ? check_usage_forwards+0x0/0x61
[<c047755e>] __lock_acquire+0x301/0xb08
[<c060bcc3>] ? get_hash_bucket+0x3a/0x55
[<c0477e1c>] lock_acquire+0xb7/0xeb
[<c060bcc3>] ? get_hash_bucket+0x3a/0x55
[<c060bcc3>] ? get_hash_bucket+0x3a/0x55
[<c082a537>] _spin_lock_irqsave+0x45/0x89
[<c060bcc3>] ? get_hash_bucket+0x3a/0x55
[<c060bcc3>] get_hash_bucket+0x3a/0x55
[<c060d07d>] add_dma_entry+0x1f/0x4f
[<c060d2fd>] debug_dma_map_sg+0xd0/0x136
[<c06de03d>] ata_qc_issue+0x223/0x2c1
[<c06e4be9>] __ata_scsi_queuecmd+0x16a/0x1c8
[<c06c25a6>] ? scsi_done+0x0/0x32
[<c06e4653>] ? ata_scsi_rw_xlat+0x0/0x20a
[<c06e4d00>] ata_scsi_queuecmd+0x55/0x95
[<c06c25a6>] ? scsi_done+0x0/0x32
[<c06c284f>] scsi_dispatch_cmd+0x187/0x208
[<c06c8641>] scsi_request_fn+0x33a/0x47d
[<c05e8cb6>] __blk_run_queue+0x49/0x85
[<c05e8db9>] blk_run_queue+0x2e/0x51
[<c06c7b30>] scsi_run_queue+0x28d/0x32b
[<c06c89b1>] scsi_next_command+0x3b/0x59
[<c06c9415>] scsi_io_completion+0x1de/0x3c1
[<c04768be>] ? trace_hardirqs_on+0x19/0x2c
[<c06c912e>] ? scsi_device_unbusy+0x97/0xaf
[<c06c258d>] scsi_finish_command+0xde/0xf7
[<c06c9722>] scsi_softirq_done+0xf9/0x112
[<c05eed28>] blk_done_softirq+0x74/0x93
[<c0452508>] __do_softirq+0xc8/0x192
[<c045261b>] do_softirq+0x49/0x7f
[<c045276f>] irq_exit+0x48/0x8c
[<c040c751>] do_IRQ+0x92/0xb7
[<c040b035>] common_interrupt+0x35/0x3c
[<c06704a9>] ? acpi_idle_enter_simple+0x11d/0x161
[<c06701d2>] acpi_idle_enter_bm+0xd2/0x28c
[<c076229a>] ? menu_select+0x48/0xc2
[<c07613c3>] cpuidle_idle_call+0x73/0xbc
[<c0409983>] cpu_idle+0xac/0xcd
[<c0813ec2>] rest_init+0x66/0x79
[<c0a86af8>] start_kernel+0x370/0x388
[<c0a86090>] i386_start_kernel+0x7f/0x98
On Tue, 7 July 2009 12:32:23 -0400, Dave Jones wrote:
>
> I see this every time I boot.
Same here, with a slightly different backtrace. Seems to go away
after quadrupling the value. Not that I understand any of it.
BUG: MAX_STACK_TRACE_ENTRIES too low!
turning off the locking correctness validator.
Pid: 264, comm: pdflush Not tainted 2.6.31-rc2 #4
Call Trace:
[<ffffffff81016c7b>] ? save_stack_trace+0x2f/0x4d
[<ffffffff8106c8b9>] save_trace+0x93/0x9b
[<ffffffff8106c940>] add_lock_to_list+0x7f/0xc0
[<ffffffff810706c9>] __lock_acquire+0x135c/0x16bb
[<ffffffff8122877e>] ? scsi_setup_fs_cmnd+0xbc/0xc5
[<ffffffff81227dc2>] ? scsi_request_fn+0x1cd/0x535
[<ffffffff81070af7>] lock_acquire+0xcf/0xfb
[<ffffffff81227dc2>] ? scsi_request_fn+0x1cd/0x535
[<ffffffff813235bf>] _spin_lock+0x36/0x6b
[<ffffffff81227dc2>] ? scsi_request_fn+0x1cd/0x535
[<ffffffff81323428>] ? _spin_unlock+0x2b/0x2f
[<ffffffff81227dc2>] scsi_request_fn+0x1cd/0x535
[<ffffffff81173a63>] __generic_unplug_device+0x35/0x3a
[<ffffffff8116deab>] elv_insert+0x24f/0x258
[<ffffffff8116df53>] __elv_add_request+0x9f/0xa7
[<ffffffff81174640>] __make_request+0x38c/0x40b
[<ffffffff81171cb5>] generic_make_request+0x326/0x370
[<ffffffff8106e3cd>] ? mark_held_locks+0x4d/0x6b
[<ffffffff81171dca>] submit_bio+0xcb/0xd4
[<ffffffff8110b87b>] submit_bh+0x106/0x12a
[<ffffffff8110e54a>] __block_write_full_page+0x1fb/0x2f6
[<ffffffff8110ce66>] ? end_buffer_async_write+0x0/0x184
[<ffffffff811109a6>] ? blkdev_get_block+0x0/0x65
[<ffffffff8110e719>] block_write_full_page_endio+0xd4/0xd8
[<ffffffff8110e732>] block_write_full_page+0x15/0x17
[<ffffffff811118c0>] blkdev_writepage+0x18/0x1a
[<ffffffff810bc6de>] __writepage+0x1a/0x40
[<ffffffff810bcff0>] write_cache_pages+0x262/0x3a8
[<ffffffff810bc6c4>] ? __writepage+0x0/0x40
[<ffffffff810bd15d>] generic_writepages+0x27/0x2d
[<ffffffff810bd193>] do_writepages+0x30/0x40
[<ffffffff81106951>] writeback_single_inode+0x189/0x395
[<ffffffff81107025>] generic_sync_sb_inodes+0x2a6/0x44a
[<ffffffff810bdfbe>] ? pdflush+0x0/0x239
[<ffffffff811072f7>] writeback_inodes+0xa2/0xfa
[<ffffffff810bd30d>] wb_kupdate+0xb3/0x129
[<ffffffff810be113>] pdflush+0x155/0x239
[<ffffffff810bd25a>] ? wb_kupdate+0x0/0x129
[<ffffffff8105dc98>] kthread+0x8d/0x95
[<ffffffff8100ce8a>] child_rip+0xa/0x20
[<ffffffff8100c810>] ? restore_args+0x0/0x30
[<ffffffff8105dc0b>] ? kthread+0x0/0x95
[<ffffffff8100ce80>] ? child_rip+0x0/0x20
Jörn
--
Correctness comes second.
Features come third.
Performance comes last.
Maintainability is easily forgotten.