2009-09-12 07:53:05

by Volker Armin Hemmann

[permalink] [raw]
Subject: 2.6.31 ehci problem - mouse dead on scroll

Hi,

I have a nice logitech wireless mouse. With 2.6.30 and earlier it works well.

With 2.6.31 it sometimes kills the ehci bus, if I scroll too fast. Very slow
scrolling is ok, not scrolling is ok. Fast scrolling, bus is dead and dmesg
looks like this:

[ 879.193292] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.193308] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.193316] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.193325] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.193774] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.193780] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.253291] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.253306] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.253312] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.253319] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.253770] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.253776] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.267040] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.267055] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.267063] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.267071] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.267666] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.267675] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.280372] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.280386] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.280392] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.280400] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.281539] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.281548] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.341202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.341216] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.341222] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.341229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.341788] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.341797] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.401202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.401216] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.401222] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.401230] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.402035] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.402043] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.461202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.461216] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.461222] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.461229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.461778] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.461786] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.521203] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.521217] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.521223] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.521230] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.522027] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.522035] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.581204] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.581218] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.581224] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.581232] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.581765] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.581773] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.641198] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.641212] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.641218] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.641226] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.642018] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.642027] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.701202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.701216] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.701222] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.701230] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.701762] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.701770] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.761201] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.761215] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.761221] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.761229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.762010] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.762018] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.821206] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.821220] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.821226] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.821234] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.821763] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.821771] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.881203] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.881217] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.881223] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.881230] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.882001] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.882010] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.941205] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.941219] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.941225] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.941233] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 879.941721] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 879.941727] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.000665] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.000679] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.000686] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.000694] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.001243] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.001251] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.061201] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.061215] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.061221] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.061228] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.061712] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.061718] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.121200] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.121213] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.121219] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.121226] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.121982] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.121990] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.181204] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.181217] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.181223] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.181231] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.181704] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.181710] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.241202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.241216] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.241222] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.241229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.241973] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.241982] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.301205] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.301218] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.301224] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.301232] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.301696] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.301702] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.361202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.361216] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.361222] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.361229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.361965] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.361973] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.421204] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.421218] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.421224] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.421231] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.421687] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.421693] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.481202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.481216] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.481222] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.481229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.481957] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.481965] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.541204] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.541218] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.541224] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.541231] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.541827] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.541835] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.600584] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.600597] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.600603] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.600611] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.601210] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.601218] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.661204] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.661218] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.661224] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.661231] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.661670] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.661676] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.721202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.721215] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.721221] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.721229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.721940] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.721948] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.781204] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.781217] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.781223] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.781231] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.781662] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.781668] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.841202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.841215] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.841221] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.841229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.841931] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.841939] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.901204] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.901217] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.901223] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.901230] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.901653] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.901659] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.959949] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.959963] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.959969] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.959977] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 880.960400] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 880.960406] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.019964] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.019979] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.019987] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.019995] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.021057] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.021066] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.080653] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.080667] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.080673] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.080681] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.081143] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.081149] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.140567] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.140581] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.140587] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.140594] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.141652] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.141661] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.200516] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.200529] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.200535] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.200543] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.201156] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.201165] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.260490] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.260504] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.260510] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.260517] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.261049] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.261057] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.319954] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.319969] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.319976] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.319984] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.320387] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.320394] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.380653] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.380666] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.380672] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.380680] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.381627] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.381633] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.440598] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.440611] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.440618] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.440625] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.441159] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.441167] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.500563] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.500577] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.500583] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.500590] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.501625] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.501634] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.560402] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.560415] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.560421] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.560428] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.561132] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.561140] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.619961] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.619974] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.619980] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.619988] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 881.620877] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 881.620885] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]


and the only thing to get the mouse back is rmmod ehci_hcd modprobe ehci_hcd.

It does not happen everytime - of course always if it is most annoying and
never when I really don't care ;)

mouse is attached to a 4port revoltec disk usb 2.0 hub with an external power
brick.


When I want to attach the mouse directly, I have to load ohci_hcd FIRST. AND
after that lsusb just hangs, but I seem to be able to scroll as much as I
want.

2762.596422] ohci_hcd 0000:00:14.5: auto-stop root hub
[ 2762.596444] ohci_hcd 0000:00:13.1: auto-stop root hub
[ 2762.596460] ohci_hcd 0000:00:13.0: auto-stop root hub
[ 2762.596476] ohci_hcd 0000:00:12.0: auto-stop root hub
[ 2764.317678] hub 7-0:1.0: hub_suspend
[ 2764.317693] usb usb7: bus auto-suspend
[ 2764.317701] ohci_hcd 0000:00:14.5: suspend root hub
[ 2764.317711] hub 6-0:1.0: hub_suspend
[ 2764.317717] usb usb6: bus auto-suspend
[ 2764.317722] ohci_hcd 0000:00:13.1: suspend root hub
[ 2764.317730] hub 5-0:1.0: hub_suspend
[ 2764.317736] usb usb5: bus auto-suspend
[ 2764.317741] ohci_hcd 0000:00:13.0: suspend root hub
[ 2764.317748] hub 3-0:1.0: hub_suspend
[ 2764.317753] usb usb3: bus auto-suspend
[ 2764.317758] ohci_hcd 0000:00:12.0: suspend root hub
[ 2764.317766] hub 2-0:1.0: hub_suspend
[ 2764.317771] usb usb2: bus auto-suspend
[ 2764.317775] ehci_hcd 0000:00:13.2: suspend root hub
[ 2766.703520] usb 1-2: lsusb timed out on ep0in len=0/2
[ 2766.703529] usb 1-2: retry with reset-resume
[ 2766.756878] ehci_hcd 0000:00:12.2: port 2 high speed
[ 2766.756891] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 2766.810184] usb 1-2: reset high speed USB device using ehci_hcd and address
2
[ 2771.819775] usb 1-2: lsusb timed out on ep0in len=0/64
[ 2776.830158] usb 1-2: lsusb timed out on ep0in len=0/64
[ 2781.839773] usb 1-2: lsusb timed out on ep0in len=0/64
[ 2781.893563] ehci_hcd 0000:00:12.2: port 2 high speed
[ 2781.893576] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 2781.946445] usb 1-2: device descriptor read/64, error -110
[ 2787.059772] usb 1-2: lsusb timed out on ep0in len=0/64
[ 2792.069779] usb 1-2: lsusb timed out on ep0in len=0/64
[ 2797.079778] usb 1-2: lsusb timed out on ep0in len=0/64
[ 2797.133554] ehci_hcd 0000:00:12.2: port 2 high speed
[ 2797.133567] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 2797.186444] usb 1-2: device descriptor read/64, error -110
[ 2797.343527] ehci_hcd 0000:00:12.2: port 2 high speed
[ 2797.343540] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 2797.396442] usb 1-2: reset high speed USB device using ehci_hcd and address
2
[ 2802.406446] usb 1-2: lsusb timed out on ep0in len=0/64
[ 2807.416445] usb 1-2: lsusb timed out on ep0in len=0/64
[ 2812.426443] usb 1-2: lsusb timed out on ep0in len=0/64
[ 2812.480192] ehci_hcd 0000:00:12.2: port 2 high speed
[ 2812.480205] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 2812.533519] usb 1-2: device descriptor read/64, error -110
[ 2817.646850] usb 1-2: lsusb timed out on ep0in len=0/64


Here is lspci:

lspci -v
00:00.0 Host bridge: ATI Technologies Inc RX780/RX790 Chipset Host Bridge
Subsystem: ASRock Incorporation A770CrossFire Motherboard
Flags: bus master, 66MHz, medium devsel, latency 0
Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [9c] HyperTransport: #1a

00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external
gfx0 port A) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: ASRock Incorporation A770CrossFire
Motherboard
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver

00:09.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express
gpp port E) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe000000-febfffff
Prefetchable memory behind bridge: 00000000fa000000-00000000fcefffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: ASRock Incorporation A770CrossFire
Motherboard
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver

00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express
gpp port F) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: ASRock Incorporation A770CrossFire
Motherboard
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver

00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller
[AHCI mode] (prog-if 01 [AHCI 1.0])
Subsystem: ASRock Incorporation Device 4391
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 22
I/O ports at a000 [size=8]
I/O ports at 9000 [size=4]
I/O ports at 8000 [size=8]
I/O ports at 7000 [size=4]
I/O ports at 6000 [size=16]
Memory at fddff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Capabilities: [70] SATA HBA <?>
Kernel driver in use: ahci

00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
(prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4397
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 7
Memory at fddfe000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd

00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-
if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4398
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 7
Memory at fddfd000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd

00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
(prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 4396
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 17
Memory at fddff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
(prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4397
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
Memory at fddfc000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd

00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-
if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4398
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
Memory at fddf7000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd

00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
(prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 4396
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 19
Memory at fddf6800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
Subsystem: ASRock Incorporation Device 4385
Flags: 66MHz, medium devsel
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel modules: i2c-piix4

00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-
if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device 439c
Flags: bus master, 66MHz, medium devsel, latency 0
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ff00 [size=16]
Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-

00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
Subsystem: ASRock Incorporation Device 439d
Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01
[Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: fcf00000-fcffffff

00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
(prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4399
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
Memory at fddf5000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd

00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64,
Sempron] HyperTransport Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64,
Sempron] Address Map
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64,
Sempron] DRAM Controller
Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64,
Sempron] Miscellaneous Control
Flags: fast devsel
Capabilities: [f0] Secure device <?>

00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64,
Sempron] Link Control
Flags: fast devsel

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller (rev 02)
Subsystem: ASRock Incorporation Motherboard (one of many)
Flags: bus master, fast devsel, latency 0, IRQ 28
I/O ports at b800 [size=256]
Memory at cffff000 (64-bit, prefetchable) [size=4K]
Memory at cffe0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fdef0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 78-56-34-12-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169

02:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3870 (prog-
if 00 [VGA controller])
Subsystem: Info-Tek Corp. Device 4070
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
I/O ports at c000 [size=256]
Expansion ROM at fdfc0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: fglrx_pci
Kernel modules: fglrx

02:00.1 Audio device: ATI Technologies Inc Radeon HD 3870 Audio device
Subsystem: Info-Tek Corp. Device aa18
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fdfec000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information <?>
Kernel modules: snd-hda-intel

05:06.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture
(rev 12)
Flags: bus master, medium devsel, latency 128, IRQ 21
Memory at fcfff000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: bttv
Kernel modules: bttv

05:08.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
Subsystem: Creative Labs Device 1001
Flags: bus master, medium devsel, latency 128, IRQ 23
I/O ports at e800 [size=64]
Capabilities: [dc] Power Management version 2
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1

lsusb:
lsusb -v

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.31r4 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:13.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 001 Device 003: ID 046d:c518 Logitech, Inc. MX610 Laser Cordless Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc518 MX610 Laser Cordless Mouse
bcdDevice 42.03
iManufacturer 1 Logitech
iProduct 2 USB Receiver
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4 RR42.03_B0039
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
** UNRECOGNIZED: 09 21 11 01 00 01 22 43 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
** UNRECOGNIZED: 09 21 11 01 00 01 22 4f 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)

Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0608 USB-2.0 4-Port HUB
bcdDevice 7.02
iManufacturer 0
iProduct 1 USB2.0 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x00e9
Per-port power switching
Per-port overcurrent protection
TT think time 32 FS bits
Port indicators
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0303 lowspeed power enable connect
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.31r4 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:12.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0503 highspeed power enable connect
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

config&dmesg are attached.

Gl?ck Auf,
Volker


ps. if you think it makes a difference I can redo it without fglrx.

pps. please cc me, not subscribed.


Attachments:
dmesg_usb.out (183.47 kB)
.config (53.96 kB)
Download all attachments

2009-09-12 18:31:11

by Volker Armin Hemmann

[permalink] [raw]
Subject: Re: 2.6.31 ehci problem - mouse dead on scroll

On Samstag 12 September 2009, you wrote:
> Hi,
>
> I have a nice logitech wireless mouse. With 2.6.30 and earlier it works
> well.
>
> With 2.6.31 it sometimes kills the ehci bus, if I scroll too fast. Very
> slow scrolling is ok, not scrolling is ok. Fast scrolling, bus is dead and
> dmesg looks like this:
>
> [ 879.193292] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.193308] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.193316] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.193325] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.193774] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.193780] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.253291] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.253306] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.253312] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.253319] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.253770] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.253776] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.267040] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.267055] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.267063] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.267071] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.267666] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.267675] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.280372] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.280386] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.280392] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.280400] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.281539] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.281548] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.341202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.341216] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.341222] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.341229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.341788] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.341797] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.401202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.401216] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.401222] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.401230] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.402035] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.402043] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.461202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.461216] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.461222] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.461229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.461778] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.461786] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.521203] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.521217] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.521223] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.521230] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.522027] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.522035] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.581204] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.581218] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.581224] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.581232] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.581765] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.581773] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.641198] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.641212] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.641218] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.641226] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.642018] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.642027] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.701202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.701216] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.701222] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.701230] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.701762] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.701770] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.761201] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.761215] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.761221] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.761229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.762010] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.762018] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.821206] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.821220] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.821226] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.821234] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.821763] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.821771] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.881203] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.881217] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.881223] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.881230] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.882001] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.882010] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.941205] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.941219] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.941225] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.941233] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 879.941721] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 879.941727] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.000665] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.000679] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.000686] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.000694] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.001243] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.001251] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.061201] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.061215] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.061221] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.061228] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.061712] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.061718] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.121200] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.121213] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.121219] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.121226] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.121982] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.121990] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.181204] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.181217] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.181223] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.181231] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.181704] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.181710] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.241202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.241216] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.241222] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.241229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.241973] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.241982] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.301205] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.301218] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.301224] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.301232] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.301696] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.301702] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.361202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.361216] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.361222] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.361229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.361965] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.361973] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.421204] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.421218] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.421224] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.421231] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.421687] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.421693] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.481202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.481216] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.481222] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.481229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.481957] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.481965] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.541204] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.541218] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.541224] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.541231] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.541827] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.541835] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.600584] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.600597] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.600603] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.600611] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.601210] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.601218] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.661204] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.661218] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.661224] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.661231] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.661670] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.661676] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.721202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.721215] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.721221] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.721229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.721940] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.721948] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.781204] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.781217] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.781223] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.781231] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.781662] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.781668] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.841202] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.841215] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.841221] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.841229] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.841931] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.841939] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.901204] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.901217] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.901223] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.901230] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.901653] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.901659] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.959949] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.959963] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.959969] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.959977] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 880.960400] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 880.960406] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.019964] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.019979] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.019987] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.019995] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.021057] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.021066] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.080653] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.080667] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.080673] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.080681] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.081143] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.081149] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.140567] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.140581] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.140587] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.140594] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.141652] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.141661] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.200516] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.200529] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.200535] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.200543] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.201156] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.201165] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.260490] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.260504] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.260510] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.260517] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.261049] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.261057] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.319954] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.319969] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.319976] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.319984] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.320387] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.320394] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.380653] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.380666] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.380672] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.380680] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.381627] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.381633] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.440598] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.440611] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.440618] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.440625] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.441159] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.441167] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.500563] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.500577] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.500583] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.500590] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.501625] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.501634] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.560402] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.560415] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.560421] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.560428] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.561132] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.561140] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.619961] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.619974] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.619980] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.619988] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
> [ 881.620877] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
> [ 881.620885] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
>
>
> and the only thing to get the mouse back is rmmod ehci_hcd modprobe
> ehci_hcd.
>
> It does not happen everytime - of course always if it is most annoying and
> never when I really don't care ;)
>
> mouse is attached to a 4port revoltec disk usb 2.0 hub with an external
> power brick.
>
>
> When I want to attach the mouse directly, I have to load ohci_hcd FIRST.
> AND after that lsusb just hangs, but I seem to be able to scroll as much
> as I want.
>
> 2762.596422] ohci_hcd 0000:00:14.5: auto-stop root hub
> [ 2762.596444] ohci_hcd 0000:00:13.1: auto-stop root hub
> [ 2762.596460] ohci_hcd 0000:00:13.0: auto-stop root hub
> [ 2762.596476] ohci_hcd 0000:00:12.0: auto-stop root hub
> [ 2764.317678] hub 7-0:1.0: hub_suspend
> [ 2764.317693] usb usb7: bus auto-suspend
> [ 2764.317701] ohci_hcd 0000:00:14.5: suspend root hub
> [ 2764.317711] hub 6-0:1.0: hub_suspend
> [ 2764.317717] usb usb6: bus auto-suspend
> [ 2764.317722] ohci_hcd 0000:00:13.1: suspend root hub
> [ 2764.317730] hub 5-0:1.0: hub_suspend
> [ 2764.317736] usb usb5: bus auto-suspend
> [ 2764.317741] ohci_hcd 0000:00:13.0: suspend root hub
> [ 2764.317748] hub 3-0:1.0: hub_suspend
> [ 2764.317753] usb usb3: bus auto-suspend
> [ 2764.317758] ohci_hcd 0000:00:12.0: suspend root hub
> [ 2764.317766] hub 2-0:1.0: hub_suspend
> [ 2764.317771] usb usb2: bus auto-suspend
> [ 2764.317775] ehci_hcd 0000:00:13.2: suspend root hub
> [ 2766.703520] usb 1-2: lsusb timed out on ep0in len=0/2
> [ 2766.703529] usb 1-2: retry with reset-resume
> [ 2766.756878] ehci_hcd 0000:00:12.2: port 2 high speed
> [ 2766.756891] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
> sig=se0 PE CONNECT
> [ 2766.810184] usb 1-2: reset high speed USB device using ehci_hcd and
> address 2
> [ 2771.819775] usb 1-2: lsusb timed out on ep0in len=0/64
> [ 2776.830158] usb 1-2: lsusb timed out on ep0in len=0/64
> [ 2781.839773] usb 1-2: lsusb timed out on ep0in len=0/64
> [ 2781.893563] ehci_hcd 0000:00:12.2: port 2 high speed
> [ 2781.893576] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
> sig=se0 PE CONNECT
> [ 2781.946445] usb 1-2: device descriptor read/64, error -110
> [ 2787.059772] usb 1-2: lsusb timed out on ep0in len=0/64
> [ 2792.069779] usb 1-2: lsusb timed out on ep0in len=0/64
> [ 2797.079778] usb 1-2: lsusb timed out on ep0in len=0/64
> [ 2797.133554] ehci_hcd 0000:00:12.2: port 2 high speed
> [ 2797.133567] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
> sig=se0 PE CONNECT
> [ 2797.186444] usb 1-2: device descriptor read/64, error -110
> [ 2797.343527] ehci_hcd 0000:00:12.2: port 2 high speed
> [ 2797.343540] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
> sig=se0 PE CONNECT
> [ 2797.396442] usb 1-2: reset high speed USB device using ehci_hcd and
> address 2
> [ 2802.406446] usb 1-2: lsusb timed out on ep0in len=0/64
> [ 2807.416445] usb 1-2: lsusb timed out on ep0in len=0/64
> [ 2812.426443] usb 1-2: lsusb timed out on ep0in len=0/64
> [ 2812.480192] ehci_hcd 0000:00:12.2: port 2 high speed
> [ 2812.480205] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
> sig=se0 PE CONNECT
> [ 2812.533519] usb 1-2: device descriptor read/64, error -110
> [ 2817.646850] usb 1-2: lsusb timed out on ep0in len=0/64
>
>
> Here is lspci:
>
> lspci -v
> 00:00.0 Host bridge: ATI Technologies Inc RX780/RX790 Chipset Host Bridge
> Subsystem: ASRock Incorporation A770CrossFire Motherboard
> Flags: bus master, 66MHz, medium devsel, latency 0
> Memory at <ignored> (64-bit, non-prefetchable)
> Capabilities: [c4] HyperTransport: Slave or Primary Interface
> Capabilities: [40] HyperTransport: Retry Mode
> Capabilities: [54] HyperTransport: UnitID Clumping
> Capabilities: [9c] HyperTransport: #1a
>
> 00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external
> gfx0 port A) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: fdf00000-fdffffff
> Prefetchable memory behind bridge:
> 00000000d0000000-00000000dfffffff Capabilities: [50] Power Management
> version 3
> Capabilities: [58] Express Root Port (Slot-), MSI 00
> Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Capabilities: [b0] Subsystem: ASRock Incorporation A770CrossFire
> Motherboard
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100] Vendor Specific Information <?>
> Capabilities: [110] Virtual Channel <?>
> Kernel driver in use: pcieport-driver
>
> 00:09.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI
> express gpp port E) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fe000000-febfffff
> Prefetchable memory behind bridge:
> 00000000fa000000-00000000fcefffff Capabilities: [50] Power Management
> version 3
> Capabilities: [58] Express Root Port (Slot-), MSI 00
> Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Capabilities: [b0] Subsystem: ASRock Incorporation A770CrossFire
> Motherboard
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100] Vendor Specific Information <?>
> Capabilities: [110] Virtual Channel <?>
> Kernel driver in use: pcieport-driver
>
> 00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI
> express gpp port F) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000b000-0000bfff
> Memory behind bridge: fde00000-fdefffff
> Prefetchable memory behind bridge:
> 00000000cff00000-00000000cfffffff Capabilities: [50] Power Management
> version 3
> Capabilities: [58] Express Root Port (Slot-), MSI 00
> Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Capabilities: [b0] Subsystem: ASRock Incorporation A770CrossFire
> Motherboard
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100] Vendor Specific Information <?>
> Capabilities: [110] Virtual Channel <?>
> Kernel driver in use: pcieport-driver
>
> 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller
> [AHCI mode] (prog-if 01 [AHCI 1.0])
> Subsystem: ASRock Incorporation Device 4391
> Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 22
> I/O ports at a000 [size=8]
> I/O ports at 9000 [size=4]
> I/O ports at 8000 [size=8]
> I/O ports at 7000 [size=4]
> I/O ports at 6000 [size=16]
> Memory at fddff800 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [60] Power Management version 2
> Capabilities: [70] SATA HBA <?>
> Kernel driver in use: ahci
>
> 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0
> Controller (prog-if 10 [OHCI])
> Subsystem: ASRock Incorporation Device 4397
> Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 7
> Memory at fddfe000 (32-bit, non-prefetchable) [size=4K]
> Kernel modules: ohci-hcd
>
> 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
> (prog- if 10 [OHCI])
> Subsystem: ASRock Incorporation Device 4398
> Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 7
> Memory at fddfd000 (32-bit, non-prefetchable) [size=4K]
> Kernel modules: ohci-hcd
>
> 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI
> Controller (prog-if 20 [EHCI])
> Subsystem: ASRock Incorporation Device 4396
> Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 17
> Memory at fddff000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [c0] Power Management version 2
> Capabilities: [e4] Debug port: BAR=1 offset=00e0
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0
> Controller (prog-if 10 [OHCI])
> Subsystem: ASRock Incorporation Device 4397
> Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
> Memory at fddfc000 (32-bit, non-prefetchable) [size=4K]
> Kernel modules: ohci-hcd
>
> 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
> (prog- if 10 [OHCI])
> Subsystem: ASRock Incorporation Device 4398
> Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
> Memory at fddf7000 (32-bit, non-prefetchable) [size=4K]
> Kernel modules: ohci-hcd
>
> 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI
> Controller (prog-if 20 [EHCI])
> Subsystem: ASRock Incorporation Device 4396
> Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 19
> Memory at fddf6800 (32-bit, non-prefetchable) [size=256]
> Capabilities: [c0] Power Management version 2
> Capabilities: [e4] Debug port: BAR=1 offset=00e0
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
> Subsystem: ASRock Incorporation Device 4385
> Flags: 66MHz, medium devsel
> Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
> Kernel modules: i2c-piix4
>
> 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
> (prog- if 8a [Master SecP PriP])
> Subsystem: ASRock Incorporation Device 439c
> Flags: bus master, 66MHz, medium devsel, latency 0
> I/O ports at 01f0 [size=8]
> I/O ports at 03f4 [size=1]
> I/O ports at 0170 [size=8]
> I/O ports at 0374 [size=1]
> I/O ports at ff00 [size=16]
> Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
>
> 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
> Subsystem: ASRock Incorporation Device 439d
> Flags: bus master, 66MHz, medium devsel, latency 0
>
> 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if
> 01 [Subtractive decode])
> Flags: bus master, 66MHz, medium devsel, latency 64
> Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
> I/O behind bridge: 0000e000-0000efff
> Prefetchable memory behind bridge: fcf00000-fcffffff
>
> 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2
> Controller (prog-if 10 [OHCI])
> Subsystem: ASRock Incorporation Device 4399
> Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
> Memory at fddf5000 (32-bit, non-prefetchable) [size=4K]
> Kernel modules: ohci-hcd
>
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64,
> Sempron] HyperTransport Configuration
> Flags: fast devsel
> Capabilities: [80] HyperTransport: Host or Secondary Interface
>
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64,
> Sempron] Address Map
> Flags: fast devsel
>
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64,
> Sempron] DRAM Controller
> Flags: fast devsel
>
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64,
> Sempron] Miscellaneous Control
> Flags: fast devsel
> Capabilities: [f0] Secure device <?>
>
> 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64,
> Sempron] Link Control
> Flags: fast devsel
>
> 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B
> PCI Express Gigabit Ethernet controller (rev 02)
> Subsystem: ASRock Incorporation Motherboard (one of many)
> Flags: bus master, fast devsel, latency 0, IRQ 28
> I/O ports at b800 [size=256]
> Memory at cffff000 (64-bit, prefetchable) [size=4K]
> Memory at cffe0000 (64-bit, prefetchable) [size=64K]
> Expansion ROM at fdef0000 [disabled] [size=64K]
> Capabilities: [40] Power Management version 3
> Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
> Capabilities: [70] Express Endpoint, MSI 01
> Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
> Capabilities: [d0] Vital Product Data
> Capabilities: [100] Advanced Error Reporting
> Capabilities: [140] Virtual Channel <?>
> Capabilities: [160] Device Serial Number 78-56-34-12-68-4c-e0-00
> Kernel driver in use: r8169
> Kernel modules: r8169
>
> 02:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3870
> (prog- if 00 [VGA controller])
> Subsystem: Info-Tek Corp. Device 4070
> Flags: bus master, fast devsel, latency 0, IRQ 29
> Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
> I/O ports at c000 [size=256]
> Expansion ROM at fdfc0000 [disabled] [size=128K]
> Capabilities: [50] Power Management version 3
> Capabilities: [58] Express Legacy Endpoint, MSI 00
> Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Capabilities: [100] Vendor Specific Information <?>
> Kernel driver in use: fglrx_pci
> Kernel modules: fglrx
>
> 02:00.1 Audio device: ATI Technologies Inc Radeon HD 3870 Audio device
> Subsystem: Info-Tek Corp. Device aa18
> Flags: bus master, fast devsel, latency 0, IRQ 10
> Memory at fdfec000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 3
> Capabilities: [58] Express Legacy Endpoint, MSI 00
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
> Capabilities: [100] Vendor Specific Information <?>
> Kernel modules: snd-hda-intel
>
> 05:06.0 Multimedia video controller: Brooktree Corporation Bt848 Video
> Capture (rev 12)
> Flags: bus master, medium devsel, latency 128, IRQ 21
> Memory at fcfff000 (32-bit, prefetchable) [size=4K]
> Kernel driver in use: bttv
> Kernel modules: bttv
>
> 05:08.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
> Subsystem: Creative Labs Device 1001
> Flags: bus master, medium devsel, latency 128, IRQ 23
> I/O ports at e800 [size=64]
> Capabilities: [dc] Power Management version 2
> Kernel driver in use: EMU10K1_Audigy
> Kernel modules: snd-emu10k1
>
> lsusb:
> lsusb -v
>
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0002 2.0 root hub
> bcdDevice 2.06
> iManufacturer 3 Linux 2.6.31r4 ehci_hcd
> iProduct 2 EHCI Host Controller
> iSerial 1 0000:00:13.2
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 6
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0100 power
> Port 3: 0000.0100 power
> Port 4: 0000.0100 power
> Port 5: 0000.0100 power
> Port 6: 0000.0100 power
> Device Status: 0x0003
> Self Powered
> Remote Wakeup Enabled
>
> Bus 001 Device 003: ID 046d:c518 Logitech, Inc. MX610 Laser Cordless Mouse
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 8
> idVendor 0x046d Logitech, Inc.
> idProduct 0xc518 MX610 Laser Cordless Mouse
> bcdDevice 42.03
> iManufacturer 1 Logitech
> iProduct 2 USB Receiver
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 59
> bNumInterfaces 2
> bConfigurationValue 1
> iConfiguration 4 RR42.03_B0039
> bmAttributes 0xa0
> (Bus Powered)
> Remote Wakeup
> MaxPower 98mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3 Human Interface Device
> bInterfaceSubClass 1 Boot Interface Subclass
> bInterfaceProtocol 2 Mouse
> iInterface 0
> ** UNRECOGNIZED: 09 21 11 01 00 01 22 43 00
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0008 1x 8 bytes
> bInterval 10
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3 Human Interface Device
> bInterfaceSubClass 0 No Subclass
> bInterfaceProtocol 0 None
> iInterface 0
> ** UNRECOGNIZED: 09 21 11 01 00 01 22 4f 00
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 EP 2 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0008 1x 8 bytes
> bInterval 10
> Device Status: 0x0000
> (Bus Powered)
>
> Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 1 Single TT
> bMaxPacketSize0 64
> idVendor 0x05e3 Genesys Logic, Inc.
> idProduct 0x0608 USB-2.0 4-Port HUB
> bcdDevice 7.02
> iManufacturer 0
> iProduct 1 USB2.0 Hub
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 100mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0001 1x 1 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 4
> wHubCharacteristic 0x00e9
> Per-port power switching
> Per-port overcurrent protection
> TT think time 32 FS bits
> Port indicators
> bPwrOn2PwrGood 50 * 2 milli seconds
> bHubContrCurrent 100 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0303 lowspeed power enable connect
> Port 3: 0000.0100 power
> Port 4: 0000.0100 power
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0003
> Self Powered
> Remote Wakeup Enabled
>
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0002 2.0 root hub
> bcdDevice 2.06
> iManufacturer 3 Linux 2.6.31r4 ehci_hcd
> iProduct 2 EHCI Host Controller
> iSerial 1 0000:00:12.2
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 6
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0503 highspeed power enable connect
> Port 3: 0000.0100 power
> Port 4: 0000.0100 power
> Port 5: 0000.0100 power
> Port 6: 0000.0100 power
> Device Status: 0x0003
> Self Powered
> Remote Wakeup Enabled
>
> config&dmesg are attached.
>
> Gl?ck Auf,
> Volker
>
>
> ps. if you think it makes a difference I can redo it without fglrx.
>
> pps. please cc me, not subscribed.
>

one more thing:
when I use ohci for the mouse, mouse is very jerky.
when I attach the mouse receiver to the hub and unload ohci, mouse is smooth,
but fast scrolling might lock it up

2009-09-14 14:02:43

by Volker Armin Hemmann

[permalink] [raw]
Subject: Re: 2.6.31 ehci problem - mouse dead on scroll

Hi,

more stuff:
even without scrolling the mouse locks up several times after boot.

After the third, fourth fifth rmmod ehci_hcd && modprobe ehci_hcd it works fine
for the rest of the day - until the next boot.

if there is something else attached to the hub - like a loading mp3 player,
the mouse does not lock up the bus.



[ 0.000000] Linux version 2.6.31r4 (root@energy) (gcc version 4.4.1 (Gentoo
4.4.1 p1.0) ) #2 SMP Sat Sep 12 11:57:14 CEST 2009
[ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3
nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable)
[ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000238000000 aka 9088M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xc7eb0 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000c7eb0000 (usable)
[ 0.000000] modified: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
[ 0.000000] modified: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS)
[ 0.000000] modified: 00000000c7ef0000 - 00000000c7f00000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000238000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7eb0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] 00c7e00000 - 00c7eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to c7eb0000 @ 10000-13000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0238000000 page 2M
[ 0.000000] kernel direct mapping tables up to 238000000 @ 12000-14000
[ 0.000000] ACPI: RSDP 00000000000fa7c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7eb0000 00040 (v01 050609 RSDT2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7eb0200 00084 (v02 A M I OEMFACP 12000601
MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7eb0440 08512 (v01 AS140 AS140121 00000121
INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7ec0000 00040
[ 0.000000] ACPI: APIC 00000000c7eb0390 0006C (v01 050609 APIC2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7eb0400 0003C (v01 050609 OEMMCFG 20090506
MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7ec0040 00071 (v01 050609 OEMB2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000c7eb8960 00027 (v01 050609 OEMAAFT 20090506
MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000c7eb8990 00038 (v01 050609 OEMHPET 20090506
MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7eb89d0 0088C (v01 A M I POWERNOW 00000001
AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0238000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
- 0000008000]
[ 0.000000] #2 [0001000000 - 00015f88c0] TEXT DATA BSS ==> [0001000000
- 00015f88c0]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00
- 0000100000]
[ 0.000000] #4 [00015f9000 - 00015f9133] BRK ==> [00015f9000
- 00015f9133]
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000
- 0000012000]
[ 0.000000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000
- 0000013000]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-
ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00238000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000c7eb0
[ 0.000000] 0: 0x00100000 -> 0x00238000
[ 0.000000] On node 0 totalpages: 2096703
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3825 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 800488 pages, LIFO batch:31
[ 0.000000] Normal zone: 17472 pages used for memmap
[ 0.000000] Normal zone: 1260480 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c7eb0000 -
00000000c7ec0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ec0000 -
00000000c7ef0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ef0000 -
00000000c7f00000
[ 0.000000] PM: Registered nosave memory: 00000000c7f00000 -
00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at c7f00000 (gap:
c7f00000:38000000)
[ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages at ffff880028034000, static data 71904
bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 2064793
[ 0.000000] Kernel command line: root=/dev/md1
md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] md: Will configure md3 (super-block) from
/dev/sda3,/dev/sdb3,/dev/sdc3, below.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 221c000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 -
0000000024000000
[ 0.000000] Memory: 8184476k/9306112k available (3493k kernel code, 919300k
absent, 201368k reserved, 1750k data, 376k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3200.001 MHz processor.
[ 0.000608] Console: colour VGA+ 80x25
[ 0.000611] console [tty0] enabled
[ 0.003333] hpet clockevent registered
[ 0.003333] alloc irq_desc for 24 on node 0
[ 0.003333] alloc kstat_irqs on node 0
[ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu
timer
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6402.66 BogoMIPS (lpj=10666656)
[ 0.003420] Mount-cache hash table entries: 256
[ 0.003543] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003577] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003612] tseg: 0000000000
[ 0.003618] CPU: Physical Processor ID: 0
[ 0.003651] CPU: Processor Core ID: 0
[ 0.003685] mce: CPU supports 6 MCE banks
[ 0.003723] using C1E aware idle routine
[ 0.003767] ACPI: Core revision 20090521
[ 0.016703] Setting APIC routing to flat
[ 0.017026] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.051000] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.053332] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666961)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] mce: CPU supports 6 MCE banks
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
[ 0.144157] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.144504] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.146698] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.003333] Initializing CPU#2
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666969)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 2
[ 0.003333] mce: CPU supports 6 MCE banks
[ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new
0x7010600070106
[ 0.240811] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.241157] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.243371] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.003333] Initializing CPU#3
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666967)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 3
[ 0.003333] mce: CPU supports 6 MCE banks
[ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new
0x7010600070106
[ 0.337510] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.337857] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.340008] Brought up 4 CPUs
[ 0.340041] Total of 4 processors activated (25610.22 BogoMIPS).
[ 0.340110] CPU0 attaching sched-domain:
[ 0.340112] domain 0: span 0-3 level MC
[ 0.340113] groups: 0 1 2 3
[ 0.340117] CPU1 attaching sched-domain:
[ 0.340118] domain 0: span 0-3 level MC
[ 0.340119] groups: 1 2 3 0
[ 0.340121] CPU2 attaching sched-domain:
[ 0.340122] domain 0: span 0-3 level MC
[ 0.340123] groups: 2 3 0 1
[ 0.340125] CPU3 attaching sched-domain:
[ 0.340126] domain 0: span 0-3 level MC
[ 0.340127] groups: 3 0 1 2
[ 0.340391] xor: automatically using best checksumming function:
generic_sse
[ 0.356667] generic_sse: 12835.200 MB/sec
[ 0.356701] xor: using function: generic_sse (12835.200 MB/sec)
[ 0.356754] Time: 15:44:26 Date: 09/14/09
[ 0.356802] NET: Registered protocol family 16
[ 0.357118] node 0 link 0: io port [1000, ffffff]
[ 0.357121] TOM: 00000000c8000000 aka 3200M
[ 0.357154] Fam 10h mmconf [e0000000, efffffff]
[ 0.357157] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.357159] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.357161] node 0 link 0: mmio [a0000, bffff]
[ 0.357163] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.357164] TOM2: 0000000238000000 aka 9088M
[ 0.357198] bus: [00,07] on node 0 link 0
[ 0.357199] bus: 00 index 0 io port: [0, ffff]
[ 0.357200] bus: 00 index 1 mmio: [f0000000, ffffffff]
[ 0.357201] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.357202] bus: 00 index 3 mmio: [c8000000, dfffffff]
[ 0.357204] bus: 00 index 4 mmio: [238000000, fcffffffff]
[ 0.357217] ACPI: bus type pci registered
[ 0.357323] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.357358] PCI: Not using MMCONFIG.
[ 0.357391] PCI: Using configuration type 1 for base access
[ 0.357425] PCI: Using configuration type 1 for extended access
[ 0.359424] bio: create slab <bio-0> at 0
[ 0.359890] ACPI: EC: Look up EC in DSDT
[ 0.367274] ACPI: Interpreter enabled
[ 0.367310] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.367909] ACPI: Using IOAPIC for interrupt routing
[ 0.367980] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.370685] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.376067] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.381353] ACPI: No dock devices found.
[ 0.381648] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.381758] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.381804] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.381839] pci 0000:00:02.0: PME# disabled
[ 0.381906] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.381941] pci 0000:00:09.0: PME# disabled
[ 0.382001] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.382036] pci 0000:00:0a.0: PME# disabled
[ 0.382115] pci 0000:00:11.0: reg 10 io port: [0xa000-0xa007]
[ 0.382121] pci 0000:00:11.0: reg 14 io port: [0x9000-0x9003]
[ 0.382127] pci 0000:00:11.0: reg 18 io port: [0x8000-0x8007]
[ 0.382133] pci 0000:00:11.0: reg 1c io port: [0x7000-0x7003]
[ 0.382139] pci 0000:00:11.0: reg 20 io port: [0x6000-0x600f]
[ 0.382145] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff]
[ 0.382193] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff]
[ 0.382244] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff]
[ 0.382312] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.382362] pci 0000:00:12.2: supports D1 D2
[ 0.382363] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.382399] pci 0000:00:12.2: PME# disabled
[ 0.382461] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff]
[ 0.382511] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff]
[ 0.382579] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff]
[ 0.382629] pci 0000:00:13.2: supports D1 D2
[ 0.382630] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.382666] pci 0000:00:13.2: PME# disabled
[ 0.382808] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.382814] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.382819] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.382825] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.382830] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.382955] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff]
[ 0.383088] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.383095] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff]
[ 0.383099] pci 0000:02:00.0: reg 20 io port: [0xc000-0xc0ff]
[ 0.383107] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 0.383122] pci 0000:02:00.0: supports D1 D2
[ 0.383150] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff]
[ 0.383180] pci 0000:02:00.1: supports D1 D2
[ 0.383230] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[ 0.383232] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.383235] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.383278] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
[ 0.383280] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfebfffff]
[ 0.383283] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff]
[ 0.383313] pci 0000:01:00.0: reg 10 io port: [0xb800-0xb8ff]
[ 0.383338] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff]
[ 0.383348] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff]
[ 0.383354] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff]
[ 0.383381] pci 0000:01:00.0: supports D1 D2
[ 0.383382] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.383418] pci 0000:01:00.0: PME# disabled
[ 0.383504] pci 0000:00:0a.0: bridge io port: [0xb000-0xbfff]
[ 0.383506] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.383509] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.383544] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff]
[ 0.383623] pci 0000:05:08.0: reg 10 io port: [0xe800-0xe83f]
[ 0.383680] pci 0000:05:08.0: supports D1 D2
[ 0.383722] pci 0000:00:14.4: transparent bridge
[ 0.383758] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[ 0.383764] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff]
[ 0.383776] pci_bus 0000:00: on NUMA node 0
[ 0.383779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.383912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.383959] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.384004] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.384069] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.386985] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.387213] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.387440] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.387666] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.387892] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0,
disabled.
[ 0.388163] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15)
[ 0.388389] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
[ 0.388601] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
[ 0.388957] SCSI subsystem initialized
[ 0.389049] libata version 3.00 loaded.
[ 0.389111] usbcore: registered new interface driver usbfs
[ 0.389170] usbcore: registered new interface driver hub
[ 0.389235] usbcore: registered new device driver usb
[ 0.443350] raid6: int64x1 2759 MB/s
[ 0.500018] raid6: int64x2 3868 MB/s
[ 0.556679] raid6: int64x4 2864 MB/s
[ 0.613343] raid6: int64x8 2533 MB/s
[ 0.670008] raid6: sse2x1 3998 MB/s
[ 0.726668] raid6: sse2x2 6801 MB/s
[ 0.783341] raid6: sse2x4 7989 MB/s
[ 0.783375] raid6: using algorithm sse2x4 (7989 MB/s)
[ 0.783458] PCI: Using ACPI for IRQ routing
[ 0.783497] pci 0000:00:00.0: BAR 3: address space collision on of device
[0xe0000000-0xffffffff]
[ 0.783551] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.796892] PCI-DMA: Disabling AGP.
[ 0.797008] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.797042] PCI-DMA: using GART IOMMU.
[ 0.797076] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.798882] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.798989] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.803361] hpet: hpet2 irq 24 for MSI
[ 0.813349] Switched to high resolution mode on CPU 0
[ 0.814512] Switched to high resolution mode on CPU 2
[ 0.814522] Switched to high resolution mode on CPU 1
[ 0.814542] Switched to high resolution mode on CPU 3
[ 0.823365] pnp: PnP ACPI init
[ 0.823416] ACPI: bus type pnp registered
[ 0.825652] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3
(0x0-0x1fffffff), disabling
[ 0.825707] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0
BAR 3 (0x0-0x1fffffff), disabling
[ 0.825762] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0
BAR 3 (0x0-0x1fffffff), disabling
[ 0.825816] pnp 00:0b: mem resource (0x100000-0xc7efffff) overlaps
0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.826121] pnp: PnP ACPI: found 12 devices
[ 0.826154] ACPI: ACPI bus type pnp unregistered
[ 0.826195] system 00:06: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.826248] system 00:06: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.826286] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.826321] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.826355] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.826390] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 0.826425] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 0.826460] system 00:07: ioport range 0xc50-0xc51 has been reserved
[ 0.826494] system 00:07: ioport range 0xc52-0xc52 has been reserved
[ 0.826529] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 0.826564] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 0.826598] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
[ 0.826633] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
[ 0.826684] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
[ 0.826719] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 0.826754] system 00:07: ioport range 0xcd8-0xcdf has been reserved
[ 0.826788] system 00:07: ioport range 0x800-0x89f has been reserved
[ 0.826823] system 00:07: ioport range 0xb00-0xb0f has been reserved
[ 0.826858] system 00:07: ioport range 0xb20-0xb3f has been reserved
[ 0.826893] system 00:07: ioport range 0x900-0x90f has been reserved
[ 0.826927] system 00:07: ioport range 0x910-0x91f has been reserved
[ 0.826962] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 0.826997] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.827033] system 00:07: iomem range 0xfec10000-0xfec1001f has been
reserved
[ 0.827069] system 00:09: ioport range 0x290-0x29f has been reserved
[ 0.827105] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.827142] system 00:0b: iomem range 0xfec00000-0xffffffff could not be
reserved
[ 0.832032] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.832067] pci 0000:00:02.0: IO window: 0xc000-0xcfff
[ 0.832103] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.832138] pci 0000:00:02.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.832193] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 0.832228] pci 0000:00:09.0: IO window: 0xd000-0xdfff
[ 0.832263] pci 0000:00:09.0: MEM window: 0xfe000000-0xfebfffff
[ 0.832298] pci 0000:00:09.0: PREFETCH window:
0x000000fa000000-0x000000fcefffff
[ 0.832353] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
[ 0.832387] pci 0000:00:0a.0: IO window: 0xb000-0xbfff
[ 0.832422] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff
[ 0.832457] pci 0000:00:0a.0: PREFETCH window:
0x000000cff00000-0x000000cfffffff
[ 0.832512] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
[ 0.832547] pci 0000:00:14.4: IO window: 0xe000-0xefff
[ 0.832585] pci 0000:00:14.4: MEM window: disabled
[ 0.832621] pci 0000:00:14.4: PREFETCH window: 0xfcf00000-0xfcffffff
[ 0.832662] alloc irq_desc for 18 on node -1
[ 0.832663] alloc kstat_irqs on node -1
[ 0.832666] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.832703] pci 0000:00:02.0: setting latency timer to 64
[ 0.832707] alloc irq_desc for 17 on node -1
[ 0.832708] alloc kstat_irqs on node -1
[ 0.832710] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.832746] pci 0000:00:09.0: setting latency timer to 64
[ 0.832749] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.832784] pci 0000:00:0a.0: setting latency timer to 64
[ 0.832791] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.832792] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.832794] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.832796] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff]
[ 0.832797] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.832799] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.832800] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfebfffff]
[ 0.832802] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff]
[ 0.832803] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.832805] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.832806] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.832808] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.832809] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff]
[ 0.832810] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.832812] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.832823] NET: Registered protocol family 2
[ 0.832879] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.833358] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 0.834323] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.834721] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.834756] TCP reno registered
[ 0.834834] NET: Registered protocol family 1
[ 0.836004] Scanning for low memory corruption every 60 seconds
[ 0.836750] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.836881] Loading Reiser4. See http://www.namesys.com for a description of
Reiser4.
[ 0.836966] msgmni has been set to 15987
[ 0.837278] alg: No test for stdrng (krng)
[ 0.837322] async_tx: api initialized (sync-only)
[ 0.837397] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.837450] io scheduler noop registered
[ 0.837485] io scheduler cfq registered (default)
[ 0.837608] pci 0000:02:00.0: Boot video device
[ 0.837699] alloc irq_desc for 25 on node -1
[ 0.837700] alloc kstat_irqs on node -1
[ 0.837706] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.837711] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.837801] alloc irq_desc for 26 on node -1
[ 0.837802] alloc kstat_irqs on node -1
[ 0.837805] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X
[ 0.837809] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.837899] alloc irq_desc for 27 on node -1
[ 0.837900] alloc kstat_irqs on node -1
[ 0.837902] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X
[ 0.837906] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 0.838103] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.838156] ACPI: Power Button [PWRF]
[ 0.838246] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.838299] ACPI: Power Button [PWRB]
[ 0.838450] processor LNXCPU:00: registered as cooling_device0
[ 0.838485] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.838583] processor LNXCPU:01: registered as cooling_device1
[ 0.838652] processor LNXCPU:02: registered as cooling_device2
[ 0.838723] processor LNXCPU:03: registered as cooling_device3
[ 0.842369] Linux agpgart interface v0.103
[ 0.842561] ahci 0000:00:11.0: version 3.0
[ 0.842570] alloc irq_desc for 22 on node -1
[ 0.842571] alloc kstat_irqs on node -1
[ 0.842575] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.842724] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f
impl SATA mode
[ 0.842779] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
slum part
[ 0.843317] scsi0 : ahci
[ 0.843462] scsi1 : ahci
[ 0.843559] scsi2 : ahci
[ 0.843653] scsi3 : ahci
[ 0.843748] scsi4 : ahci
[ 0.843843] scsi5 : ahci
[ 0.843972] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed
[ 0.844009] ata2: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff980 irq
22
[ 0.844063] ata3: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa00 irq
22
[ 0.844117] ata4: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa80 irq
22
[ 0.844171] ata5: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb00 irq
22
[ 0.844225] ata6: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb80 irq
22
[ 0.844490] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.844525] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.845074] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.845226] mice: PS/2 mouse device common for all mice
[ 0.845388] rtc_cmos 00:02: RTC can wake from S4
[ 0.845455] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.845510] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.845566] md: raid1 personality registered for level 1
[ 0.845601] md: raid6 personality registered for level 6
[ 0.845635] md: raid5 personality registered for level 5
[ 0.845669] md: raid4 personality registered for level 4
[ 0.845751] cpuidle: using governor ladder
[ 0.846773] usbcore: registered new interface driver hiddev
[ 0.846828] usbcore: registered new interface driver usbhid
[ 0.846862] usbhid: v2.6:USB HID core driver
[ 0.846923] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 0.846957] ALSA device list:
[ 0.846991] No soundcards found.
[ 0.847057] TCP cubic registered
[ 0.847097] NET: Registered protocol family 10
[ 0.847220] IPv6 over IPv4 tunneling driver
[ 0.847333] NET: Registered protocol family 17
[ 0.847382] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor
processors (4 cpu cores) (version 2.20.00)
[ 0.847458] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 0.847492] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 0.847526] powernow-k8: 2 : pstate 2 (2100 MHz)
[ 0.847559] powernow-k8: 3 : pstate 3 (800 MHz)
[ 0.847947] PM: Resume from disk failed.
[ 0.848029] Magic number: 9:345:740
[ 0.872022] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 1.163786] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.163848] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.163901] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.163955] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.164009] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.170138] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
[ 1.170179] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.170227] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7
[ 1.170261] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.176634] ata4.00: configured for UDMA/133
[ 1.176695] ata2.00: configured for UDMA/133
[ 1.563784] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.570131] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7
[ 1.570167] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.576588] ata1.00: configured for UDMA/133
[ 1.588000] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0
PQ: 0 ANSI: 5
[ 1.588249] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.588320] sd 0:0:0:0: [sda] Write Protect is off
[ 1.588355] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.588363] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.588473] sda:
[ 1.588511] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.588653] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0
PQ: 0 ANSI: 5
[ 1.588820] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.588890] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.588925] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.588934] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.589041] sdb:
[ 1.589124] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.589287] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0
PQ: 0 ANSI: 5
[ 1.589455] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750
GB/698 GiB)
[ 1.589508] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.589558] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.589592] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.589600] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.589695] sdc: sdb1 sdb2 sdb3 sdb4 < sda1 sda2 sda3 sda4 < sdb5 sdc1
sdc2 sdc3 sdc4 < sda5 sdc5 sdb6 >
[ 1.610148] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.614506] sda6 >
[ 1.614860] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.615476] sdc6 sdc7 >
[ 1.629040] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.629082] md: Waiting for all devices to be available before autodetect
[ 1.629117] md: If you don't use raid, use raid=noautodetect
[ 1.629228] md: Autodetecting RAID arrays.
[ 1.735434] md: Scanned 12 and added 12 devices.
[ 1.735469] md: autorun ...
[ 1.735503] md: considering sdc6 ...
[ 1.735538] md: adding sdc6 ...
[ 1.735573] md: sdc5 has different UUID to sdc6
[ 1.735607] md: sdc3 has different UUID to sdc6
[ 1.735642] md: sdc1 has different UUID to sdc6
[ 1.735677] md: adding sda6 ...
[ 1.735712] md: sda5 has different UUID to sdc6
[ 1.735746] md: sda3 has different UUID to sdc6
[ 1.735781] md: sda1 has different UUID to sdc6
[ 1.735816] md: adding sdb6 ...
[ 1.735850] md: sdb5 has different UUID to sdc6
[ 1.735885] md: sdb3 has different UUID to sdc6
[ 1.735920] md: sdb1 has different UUID to sdc6
[ 1.736052] md: created md3
[ 1.736085] md: bind<sdb6>
[ 1.736122] md: bind<sda6>
[ 1.736158] md: bind<sdc6>
[ 1.736194] md: running: <sdc6><sda6><sdb6>
[ 1.736328] raid5: device sdc6 operational as raid disk 2
[ 1.736363] raid5: device sda6 operational as raid disk 0
[ 1.736397] raid5: device sdb6 operational as raid disk 1
[ 1.736549] raid5: allocated 3220kB for md3
[ 1.736607] raid5: raid level 5 set md3 active with 3 out of 3 devices,
algorithm 2
[ 1.736660] RAID5 conf printout:
[ 1.736695] --- rd:3 wd:3
[ 1.736728] disk 0, o:1, dev:sda6
[ 1.736762] disk 1, o:1, dev:sdb6
[ 1.736795] disk 2, o:1, dev:sdc6
[ 1.736843] md3: detected capacity change from 0 to 864065421312
[ 1.736914] md: considering sdc5 ...
[ 1.736950] md: adding sdc5 ...
[ 1.736984] md: sdc3 has different UUID to sdc5
[ 1.737019] md: sdc1 has different UUID to sdc5
[ 1.737054] md: adding sda5 ...
[ 1.737088] md: sda3 has different UUID to sdc5
[ 1.737123] md: sda1 has different UUID to sdc5
[ 1.737159] md: adding sdb5 ...
[ 1.737193] md: sdb3 has different UUID to sdc5
[ 1.737228] md: sdb1 has different UUID to sdc5
[ 1.737326] md: created md2
[ 1.737360] md: bind<sdb5>
[ 1.737396] md: bind<sda5>
[ 1.737432] md: bind<sdc5>
[ 1.737467] md: running: <sdc5><sda5><sdb5>
[ 1.737598] raid5: device sdc5 operational as raid disk 2
[ 1.737627] raid5: device sda5 operational as raid disk 0
[ 1.737661] raid5: device sdb5 operational as raid disk 1
[ 1.737816] raid5: allocated 3220kB for md2
[ 1.737878] raid5: raid level 5 set md2 active with 3 out of 3 devices,
algorithm 2
[ 1.737940] RAID5 conf printout:
[ 1.737973] --- rd:3 wd:3
[ 1.738006] disk 0, o:1, dev:sda5
[ 1.738039] disk 1, o:1, dev:sdb5
[ 1.738072] disk 2, o:1, dev:sdc5
[ 1.738118] md2: detected capacity change from 0 to 40007499776
[ 1.738186] md: considering sdc3 ...
[ 1.738222] md: adding sdc3 ...
[ 1.738256] md: sdc1 has different UUID to sdc3
[ 1.738292] md: adding sda3 ...
[ 1.738326] md: sda1 has different UUID to sdc3
[ 1.738361] md: adding sdb3 ...
[ 1.738395] md: sdb1 has different UUID to sdc3
[ 1.738495] md: created md1
[ 1.738529] md: bind<sdb3>
[ 1.738565] md: bind<sda3>
[ 1.738601] md: bind<sdc3>
[ 1.738637] md: running: <sdc3><sda3><sdb3>
[ 1.738777] raid5: device sdc3 operational as raid disk 2
[ 1.738811] raid5: device sda3 operational as raid disk 0
[ 1.738845] raid5: device sdb3 operational as raid disk 1
[ 1.739004] raid5: allocated 3220kB for md1
[ 1.739053] raid5: raid level 5 set md1 active with 3 out of 3 devices,
algorithm 2
[ 1.739106] RAID5 conf printout:
[ 1.739139] --- rd:3 wd:3
[ 1.739172] disk 0, o:1, dev:sda3
[ 1.739205] disk 1, o:1, dev:sdb3
[ 1.739239] disk 2, o:1, dev:sdc3
[ 1.739287] md1: detected capacity change from 0 to 79998877696
[ 1.739355] md: considering sdc1 ...
[ 1.739391] md: adding sdc1 ...
[ 1.739426] md: adding sda1 ...
[ 1.739461] md: adding sdb1 ...
[ 1.739494] md: created md0
[ 1.739527] md: bind<sdb1>
[ 1.739563] md: bind<sda1>
[ 1.739599] md: bind<sdc1>
[ 1.739635] md: running: <sdc1><sda1><sdb1>
[ 1.739812] raid1: raid set md0 active with 3 out of 3 mirrors
[ 1.739857] md0: detected capacity change from 0 to 65667072
[ 1.739913] md: ... autorun DONE.
[ 1.739965] md: Loading md3: /dev/sda3
[ 1.740004] md3: unknown partition table
[ 1.740162] md: couldn't update array info. -22
[ 1.740200] md: could not bd_claim sda3.
[ 1.740234] md: md_import_device returned -16
[ 1.740270] md: could not bd_claim sdb3.
[ 1.740303] md: md_import_device returned -16
[ 1.740339] md: could not bd_claim sdc3.
[ 1.740372] md: md_import_device returned -16
[ 1.740407] md: starting md3 failed
[ 1.740480] md1: unknown partition table
[ 1.778802] reiser4: md1: found disk format 4.0.0.
[ 5.781805] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1.
[ 5.781857] Freeing unused kernel memory: 376k freed
[ 8.975188] udev: starting version 145
[ 9.126811] md0:
[ 9.128322] md2: unknown partition table
[ 9.161557] unknown partition table
[ 9.967391] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.967405] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.967641] r8169 0000:01:00.0: setting latency timer to 64
[ 9.967672] alloc irq_desc for 28 on node -1
[ 9.967673] alloc kstat_irqs on node -1
[ 9.967683] r8169 0000:01:00.0: irq 28 for MSI/MSI-X
[ 9.967778] eth0: RTL8168c/8111c at 0xffffc90013002000, 00:19:66:86:ce:12,
XID 3c4000c0 IRQ 28
[ 10.004217] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.004219] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
[ 10.004245] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 10.004280] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 10.004294] drivers/usb/core/inode.c: creating file 'devices'
[ 10.004297] drivers/usb/core/inode.c: creating file '001'
[ 10.004330] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 10.004336] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2
pcc=3 ordered !ppc ports=6
[ 10.004340] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes
256/512/1024
[ 10.004361] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze
workaround
[ 10.004367] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 10.004379] ehci_hcd 0000:00:12.2: debug port 1
[ 10.004384] ehci_hcd 0000:00:12.2: MWI active
[ 10.004385] ehci_hcd 0000:00:12.2: supports USB remote wakeup
[ 10.004399] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 10.004402] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 10.004407] ehci_hcd 0000:00:12.2: init command 010009 (park)=0 ithresh=1
period=256 RUN
[ 10.014600] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 10.014633] usb usb1: default language 0x0409
[ 10.014637] usb usb1: udev 1, busnum 1, minor = 0
[ 10.014639] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.014640] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.014642] usb usb1: Product: EHCI Host Controller
[ 10.014643] usb usb1: Manufacturer: Linux 2.6.31r4 ehci_hcd
[ 10.014644] usb usb1: SerialNumber: 0000:00:12.2
[ 10.014671] usb usb1: uevent
[ 10.014680] usb usb1: usb_probe_device
[ 10.014682] usb usb1: configuration #1 chosen from 1 choice
[ 10.014687] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 10.014694] usb 1-0:1.0: uevent
[ 10.014701] hub 1-0:1.0: usb_probe_interface
[ 10.014702] hub 1-0:1.0: usb_probe_interface - got id
[ 10.014704] hub 1-0:1.0: USB hub found
[ 10.014708] hub 1-0:1.0: 6 ports detected
[ 10.014709] hub 1-0:1.0: standalone hub
[ 10.014710] hub 1-0:1.0: no power switching (usb 1.0)
[ 10.014711] hub 1-0:1.0: individual port over-current protection
[ 10.014712] hub 1-0:1.0: power on to power good time: 20ms
[ 10.014715] hub 1-0:1.0: local power source is good
[ 10.014717] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 10.014742] drivers/usb/core/inode.c: creating file '001'
[ 10.014760] alloc irq_desc for 19 on node -1
[ 10.014762] alloc kstat_irqs on node -1
[ 10.014765] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 10.014776] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 10.014779] drivers/usb/core/inode.c: creating file '002'
[ 10.014795] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 10.014800] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2
pcc=3 ordered !ppc ports=6
[ 10.014803] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes
256/512/1024
[ 10.014816] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze
workaround
[ 10.014822] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 10.014834] ehci_hcd 0000:00:13.2: debug port 1
[ 10.014837] ehci_hcd 0000:00:13.2: MWI active
[ 10.014838] ehci_hcd 0000:00:13.2: supports USB remote wakeup
[ 10.014847] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 10.014850] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 10.014856] ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1
period=256 RUN
[ 10.024597] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 10.024611] usb usb2: default language 0x0409
[ 10.024614] usb usb2: udev 1, busnum 2, minor = 128
[ 10.024615] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.024617] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.024618] usb usb2: Product: EHCI Host Controller
[ 10.024619] usb usb2: Manufacturer: Linux 2.6.31r4 ehci_hcd
[ 10.024620] usb usb2: SerialNumber: 0000:00:13.2
[ 10.024644] usb usb2: uevent
[ 10.024651] usb usb2: usb_probe_device
[ 10.024653] usb usb2: configuration #1 chosen from 1 choice
[ 10.024656] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 10.024664] usb 2-0:1.0: uevent
[ 10.024669] hub 2-0:1.0: usb_probe_interface
[ 10.024670] hub 2-0:1.0: usb_probe_interface - got id
[ 10.024671] hub 2-0:1.0: USB hub found
[ 10.024675] hub 2-0:1.0: 6 ports detected
[ 10.024676] hub 2-0:1.0: standalone hub
[ 10.024677] hub 2-0:1.0: no power switching (usb 1.0)
[ 10.024678] hub 2-0:1.0: individual port over-current protection
[ 10.024679] hub 2-0:1.0: power on to power good time: 20ms
[ 10.024681] hub 2-0:1.0: local power source is good
[ 10.024683] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 10.024706] drivers/usb/core/inode.c: creating file '001'
[ 10.037996] Linux video capture interface: v2.00
[ 10.047459] bttv: driver version 0.9.18 loaded
[ 10.047461] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 10.047522] bttv: Bt8xx card found (0).
[ 10.047530] alloc irq_desc for 21 on node -1
[ 10.047531] alloc kstat_irqs on node -1
[ 10.047535] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 10.047544] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 128,
mmio: 0xfcfff000
[ 10.047577] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra
TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option]
[ 10.047579] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 10.047611] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 10.114604] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001803 POWER
sig=j CSC CONNECT
[ 10.114606] hub 1-0:1.0: port 2: status 0501 change 0001
[ 10.124614] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 10.214600] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000
[ 10.214609] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 10.267115] ehci_hcd 0000:00:12.2: port 2 high speed
[ 10.267119] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 10.320436] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 10.373786] ehci_hcd 0000:00:12.2: port 2 high speed
[ 10.373789] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 10.445269] usb 1-2: default language 0x0409
[ 10.445518] usb 1-2: udev 2, busnum 1, minor = 1
[ 10.445519] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 10.445521] usb 1-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 10.445522] usb 1-2: Product: USB2.0 Hub
[ 10.445559] usb 1-2: uevent
[ 10.445568] usb 1-2: usb_probe_device
[ 10.445570] usb 1-2: configuration #1 chosen from 1 choice
[ 10.445989] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
[ 10.445999] usb 1-2:1.0: uevent
[ 10.446007] hub 1-2:1.0: usb_probe_interface
[ 10.446008] hub 1-2:1.0: usb_probe_interface - got id
[ 10.446014] hub 1-2:1.0: USB hub found
[ 10.446266] hub 1-2:1.0: 4 ports detected
[ 10.446267] hub 1-2:1.0: standalone hub
[ 10.446268] hub 1-2:1.0: individual port power switching
[ 10.446269] hub 1-2:1.0: individual port over-current protection
[ 10.446270] hub 1-2:1.0: Single TT
[ 10.446271] hub 1-2:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 10.446273] hub 1-2:1.0: Port indicators are supported
[ 10.446274] hub 1-2:1.0: power on to power good time: 100ms
[ 10.446639] hub 1-2:1.0: local power source is good
[ 10.446641] hub 1-2:1.0: enabling power on all ports
[ 10.447651] drivers/usb/core/inode.c: creating file '002'
[ 10.548520] hub 1-2:1.0: port 2: status 0301 change 0001
[ 10.549274] hub 1-2:1.0: port 4: status 0101 change 0001
[ 10.647923] usb 1-2: link qh256-0001/ffff8800c7800180 start 1 [1/0 us]
[ 10.647930] hub 1-2:1.0: state 7 ports 4 chg 0014 evt 0000
[ 10.648269] hub 1-2:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[ 10.715261] usb 1-2.2: new low speed USB device using ehci_hcd and address
3
[ 10.801883] usb 1-2.2: skipped 1 descriptor after interface
[ 10.801885] usb 1-2.2: skipped 1 descriptor after interface
[ 10.802380] usb 1-2.2: default language 0x0409
[ 10.804628] usb 1-2.2: udev 3, busnum 1, minor = 2
[ 10.804629] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518
[ 10.804631] usb 1-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 10.804632] usb 1-2.2: Product: USB Receiver
[ 10.804633] usb 1-2.2: Manufacturer: Logitech
[ 10.804659] usb 1-2.2: uevent
[ 10.804670] usb 1-2.2: usb_probe_device
[ 10.804671] usb 1-2.2: configuration #1 chosen from 1 choice
[ 10.812007] usb 1-2.2: adding 1-2.2:1.0 (config #1, interface 0)
[ 10.812016] usb 1-2.2:1.0: uevent
[ 10.812027] usbhid 1-2.2:1.0: usb_probe_interface
[ 10.812029] usbhid 1-2.2:1.0: usb_probe_interface - got id
[ 10.812369] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42
[ 10.815257] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input3
[ 10.815294] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input0
[ 10.815302] usb 1-2.2: adding 1-2.2:1.1 (config #1, interface 1)
[ 10.815311] usb 1-2.2:1.1: uevent
[ 10.815318] usbhid 1-2.2:1.1: usb_probe_interface
[ 10.815319] usbhid 1-2.2:1.1: usb_probe_interface - got id
[ 10.815619] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42
[ 10.820918] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input4
[ 10.820924] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 10.820938] drivers/usb/core/file.c: looking for a minor, starting at 96
[ 10.820967] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input1
[ 10.820975] drivers/usb/core/inode.c: creating file '003'
[ 10.821266] hub 1-2:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 10.845138] usb 1-2.2:1.0: uevent
[ 10.845189] usb 1-2.2: uevent
[ 10.845217] usb 1-2.2:1.0: uevent
[ 10.845270] usb 1-2.2: uevent
[ 10.845751] usb 1-2.2:1.1: uevent
[ 10.845813] usb 1-2.2: uevent
[ 10.845854] usb 1-2.2:1.0: uevent
[ 10.845884] usb 1-2.2:1.0: uevent
[ 10.846526] usb 1-2.2:1.1: uevent
[ 10.888757] usb 1-2.4: new high speed USB device using ehci_hcd and address
4
[ 11.050025] bttv0: tea5757: read timeout
[ 11.050026] bttv0: tuner type=5
[ 11.069319] bttv0: audio absent, no audio device found!
[ 11.083055] TUNER: Unable to find symbol tea5767_autodetection()
[ 11.083058] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw])
[ 11.092406] tuner-simple 0-0060: creating new instance
[ 11.092408] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and
compatibles))
[ 11.093212] bttv0: registered device video0
[ 11.093244] bttv0: registered device vbi0
[ 11.382479] reiser4: md2: found disk format 4.0.0.
[ 11.850179] usb 1-2.4: default language 0x0409
[ 11.851685] usb 1-2.4: udev 4, busnum 1, minor = 3
[ 11.851686] usb 1-2.4: New USB device found, idVendor=0781, idProduct=7421
[ 11.851688] usb 1-2.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 11.851690] usb 1-2.4: Product: Sansa e260
[ 11.851691] usb 1-2.4: Manufacturer: SanDisk
[ 11.851692] usb 1-2.4: SerialNumber:
00000000-00000000-8911b49b-9905e904-00000000
[ 11.851739] usb 1-2.4: uevent
[ 11.851750] usb 1-2.4: usb_probe_device
[ 11.851752] usb 1-2.4: configuration #128 chosen from 1 choice
[ 11.866061] usb 1-2.4: adding 1-2.4:128.0 (config #128, interface 0)
[ 11.866075] usb 1-2.4:128.0: uevent
[ 11.866097] drivers/usb/core/inode.c: creating file '004'
[ 11.866108] hub 1-2:1.0: state 7 ports 4 chg 0000 evt 0010
[ 11.886025] Initializing USB Mass Storage driver...
[ 11.886046] usb-storage 1-2.4:128.0: usb_probe_interface
[ 11.886049] usb-storage 1-2.4:128.0: usb_probe_interface - got id
[ 11.886097] scsi6 : SCSI emulation for USB Mass Storage devices
[ 11.886167] usb-storage: device found at 4
[ 11.886169] usb-storage: waiting for device to settle before scanning
[ 11.886175] usbcore: registered new interface driver usb-storage
[ 11.886190] USB Mass Storage support registered.
[ 12.337099] hub 2-0:1.0: hub_suspend
[ 12.337104] usb usb2: bus auto-suspend
[ 12.337105] ehci_hcd 0000:00:13.2: suspend root hub
[ 13.200175] reiser4: md3: found disk format 4.0.0.
[ 16.885258] scsi 6:0:0:0: Direct-Access SanDisk Sansa e260
PQ: 0 ANSI: 0
[ 16.885639] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 16.887625] scsi 6:0:0:1: Direct-Access SanDisk Sansa e260
PQ: 0 ANSI: 0
[ 16.887697] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 16.888632] sd 6:0:0:0: [sdd] 7854080 512-byte logical blocks: (4.02
GB/3.74 GiB)
[ 16.890693] usb 1-2.4:128.0: uevent
[ 16.890755] usb 1-2.4: uevent
[ 16.891005] sd 6:0:0:0: [sdd] Write Protect is off
[ 16.891007] sd 6:0:0:0: [sdd] Mode Sense: 45 00 00 00
[ 16.891009] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 16.891540] usb 1-2.4:128.0: uevent
[ 16.892378] sd 6:0:0:1: [sde] Attached SCSI removable disk
[ 16.898131] usb-storage: device scan complete
[ 16.899128] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 16.899131] sdd: sdd1 sdd2
[ 16.910613] usb 1-2.4:128.0: uevent
[ 16.910659] usb 1-2.4: uevent
[ 16.911352] usb 1-2.4:128.0: uevent
[ 16.912379] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 16.912382] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 54.396254] reiser4: sdc7: found disk format 4.0.0.
[ 66.731638] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1
across:7815612k
[ 66.741397] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1
across:7815612k
[ 66.806036] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1
across:7815612k
[ 67.523629] w83627ehf: Found W83627EHG chip at 0x290
[ 67.918061] r8169: eth0: link up
[ 67.918070] r8169: eth0: link up
[ 70.196495] usb usb1: uevent
[ 70.196601] usb 1-0:1.0: uevent
[ 70.196695] usb 1-2: uevent
[ 70.196801] usb 1-2.2: uevent
[ 70.196905] usb 1-2.2:1.0: uevent
[ 70.197647] usb 1-2.2:1.1: uevent
[ 70.198329] usb 1-2.4: uevent
[ 70.198436] usb 1-2.4:128.0: uevent
[ 70.200226] usb 1-2:1.0: uevent
[ 70.200604] usb usb2: uevent
[ 70.200746] usb 2-0:1.0: uevent
[ 71.245297] alloc irq_desc for 23 on node -1
[ 71.245303] alloc kstat_irqs on node -1
[ 71.245317] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) -
> IRQ 23
[ 71.252291] Audigy2 value: Special config.
[ 72.518788] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[ 72.518791] Disabling lock debugging due to kernel taint
[ 72.531488] [fglrx] Maximum main memory to use for locked dma buffers: 7760
MBytes.
[ 72.531563] [fglrx] vendor: 1002 device: 9501 count: 1
[ 72.531738] [fglrx] ioport: bar 4, base 0xc000, size: 0x100
[ 72.531748] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 72.531752] pci 0000:02:00.0: setting latency timer to 64
[ 72.531879] [fglrx] Kernel PAT support is enabled
[ 72.531896] [fglrx] module loaded - fglrx 8.66.2 [Sep 1 2009] with 1
minors
[ 72.705700] alloc irq_desc for 29 on node -1
[ 72.705702] alloc kstat_irqs on node -1
[ 72.705711] fglrx_pci 0000:02:00.0: irq 29 for MSI/MSI-X
[ 72.706037] [fglrx] Firegl kernel thread PID: 3849
[ 74.812320] [fglrx] Gart USWC size:1279 M.
[ 74.812322] [fglrx] Gart cacheable size:508 M.
[ 74.812325] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 74.812327] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000
[ 74.812329] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[ 76.077543] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 211.153993] reiser4[bogofilter(4043)]: disable_write_barrier
(fs/reiser4/wander.c:235)[zam-1055]:
[ 211.153997] NOTICE: md3 does not support write barriers, using synchronous
write instead.
[ 236.764601] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 236.764616] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 236.764624] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 236.764633] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 236.765140] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 236.765146] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 238.553574] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 238.553590] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 238.553597] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 238.553606] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 238.554149] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 238.554155] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 242.964601] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 242.964617] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 242.964624] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 242.964633] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 242.965127] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 242.965134] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 243.377268] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 243.377284] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 243.377292] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 243.377300] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 243.378247] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 243.378256] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 245.597932] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 245.597948] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 245.597956] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 245.597964] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 245.598462] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 245.598468] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 320.868424] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 320.868440] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 320.868448] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 320.868457] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 320.870128] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 320.870137] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 322.196316] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 322.196325] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 322.196328] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 322.196331] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 322.196786] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 322.196789] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 398.107922] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 398.107939] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 398.107947] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 398.107955] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 398.108431] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 398.108437] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 476.898649] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 476.898656] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 476.898658] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 476.898661] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 476.899121] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 476.899123] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 498.181222] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 498.181231] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 498.181233] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 498.181235] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 498.181668] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 498.181670] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 504.747933] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 504.747957] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 504.747965] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 504.747974] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 504.748522] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 504.748529] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 611.820993] reiser4[ktxnmgrd:md1:ru(581)]: disable_write_barrier
(fs/reiser4/wander.c:235)[zam-1055]:
[ 611.820997] NOTICE: md1 does not support write barriers, using synchronous
write instead.
[ 670.449593] reiser4[ktxnmgrd:md2:ru(2794)]: disable_write_barrier
(fs/reiser4/wander.c:235)[zam-1055]:
[ 670.449597] NOTICE: md2 does not support write barriers, using synchronous
write instead.
[ 718.057127] usb usb2: usb auto-resume
[ 718.057138] ehci_hcd 0000:00:13.2: resume root hub
[ 718.084125] hub 2-0:1.0: hub_resume
[ 718.084172] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 720.327466] hub 2-0:1.0: hub_suspend
[ 720.327479] usb usb2: bus auto-suspend
[ 720.327485] ehci_hcd 0000:00:13.2: suspend root hub

lsusb -v

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.31r4 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:13.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 001 Device 004: ID 0781:7421 SanDisk Corp. Sansa E200 series
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0781 SanDisk Corp.
idProduct 0x7421 Sansa E200 series
bcdDevice 7.20
iManufacturer 1 SanDisk
iProduct 2 Sansa e260
iSerial 3 00000000-00000000-8911b49b-9905e904-00000000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 128
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered

Bus 001 Device 003: ID 046d:c518 Logitech, Inc. MX610 Laser Cordless Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc518 MX610 Laser Cordless Mouse
bcdDevice 42.03
iManufacturer 1 Logitech
iProduct 2 USB Receiver
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4 RR42.03_B0039
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
** UNRECOGNIZED: 09 21 11 01 00 01 22 43 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
** UNRECOGNIZED: 09 21 11 01 00 01 22 4f 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)

Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0608 USB-2.0 4-Port HUB
bcdDevice 7.02
iManufacturer 0
iProduct 1 USB2.0 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x00e9
Per-port power switching
Per-port overcurrent protection
TT think time 32 FS bits
Port indicators
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0303 lowspeed power enable connect
Port 3: 0000.0100 power
Port 4: 0000.0503 highspeed power enable connect
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.31r4 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:12.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0503 highspeed power enable connect
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Gl?ck Auf,
Volker

2009-09-14 14:06:20

by Volker Armin Hemmann

[permalink] [raw]
Subject: Re: 2.6.31 ehci problem - mouse dead on scroll

On Montag 14 September 2009, you wrote:

> [ 720.327485] ehci_hcd 0000:00:13.2: suspend root hub


*sigh* shortly after sending the mail the mouse locked up:

[ 796.056891] usb usb2: usb auto-resume
[ 796.056902] ehci_hcd 0000:00:13.2: resume root hub
[ 796.083701] hub 2-0:1.0: hub_resume
[ 796.083751] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 796.096460] usb 1-2: clear tt buffer port 2, a3 ep0 t800a0d42
[ 796.097071] usb 1-2: clear tt buffer port 2, a3 ep0 t80040d42
[ 798.337044] hub 2-0:1.0: hub_suspend
[ 798.337059] usb usb2: bus auto-suspend
[ 798.337064] ehci_hcd 0000:00:13.2: suspend root hub
[ 847.227876] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 847.227892] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 847.227900] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 847.227908] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 847.228397] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 847.228403] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 849.187876] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 849.187892] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 849.187900] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 849.187908] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 849.188399] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 849.188405] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 914.864527] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 914.864544] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 914.864552] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 914.864560] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 914.865049] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 914.865056] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 939.274185] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 939.274201] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 939.274209] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 939.274217] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 939.274844] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 939.274851] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 1087.528888] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 1087.528904] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 1087.528912] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 1087.528921] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 1087.529521] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 1087.529530] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 1116.931180] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1116.931196] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1116.931204] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1116.931213] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1116.931663] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1116.931669] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1116.991182] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1116.991197] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1116.991203] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1116.991211] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1116.992183] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1116.992193] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.051184] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.051200] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.051206] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.051214] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.051930] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.051940] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.211181] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.211196] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.211204] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.211213] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.211226] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 1117.211236] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 1117.211242] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 1117.211250] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 1117.211645] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.211651] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.212167] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800300 schedule
[ 1117.212177] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 1117.271180] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.271198] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.271206] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.271215] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.272173] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.272183] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.431181] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.431197] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.431205] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.431214] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.431781] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.431791] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.686367] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.686383] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.686390] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.686399] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.686857] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.686864] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.711166] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.711181] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.711187] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.711194] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.712113] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.712119] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.771158] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.771165] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.771167] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.771170] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.771854] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.771857] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.831158] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.831165] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.831167] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.831170] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1117.832096] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1117.832098] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.191175] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.191191] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1118.191198] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.191207] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.191712] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1118.191719] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.251177] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.251193] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1118.251201] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.251209] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.251832] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1118.251838] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.711173] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.711189] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1118.711197] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.711205] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.712432] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1118.712441] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.771178] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.771194] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1118.771201] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.771210] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1118.771802] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1118.771809] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1119.531173] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1119.531189] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1119.531198] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1119.531206] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1119.531755] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1119.531762] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1119.591181] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1119.591197] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1119.591204] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1119.591212] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1119.592773] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1119.592782] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.557845] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.557861] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1120.557869] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.557878] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.558463] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1120.558472] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.617847] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.617861] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1120.617867] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.617874] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.618954] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1120.618963] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.677844] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.677858] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1120.677864] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.677871] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.678452] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1120.678461] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.737845] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.737859] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1120.737865] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.737872] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1120.738946] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1120.738955] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.097841] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.097854] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.097861] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.097868] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.098275] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.098281] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.157843] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.157856] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.157862] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.157870] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.158417] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.158426] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.217845] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.217859] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.217865] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.217872] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.218916] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.218924] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.277843] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.277856] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.277862] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.277869] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.278415] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.278423] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.337838] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.337851] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.337857] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.337865] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.338908] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.338917] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.397843] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.397856] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.397862] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.397870] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.398405] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.398413] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.457844] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.457858] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.457864] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.457872] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.458900] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.458909] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.517843] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.517856] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.517862] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.517869] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.518395] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.518404] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.577844] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.577858] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.577864] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.577871] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.578893] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.578902] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.637843] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.637856] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.637862] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.637870] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.638391] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.638400] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.684871] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.684885] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.684890] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.684898] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.685262] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.685268] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.697847] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.697859] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.697865] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.697873] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.699013] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.699021] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.717845] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.717858] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.717864] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.717871] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.718235] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.718241] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.727843] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.727856] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.727862] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.727869] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.728873] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.728881] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.787844] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.787856] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.787862] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.787869] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.788357] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.788363] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.847841] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.847854] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.847860] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.847867] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.848626] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.848634] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.907843] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.907856] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.907862] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.907869] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.908349] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.908355] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.967841] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.967854] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.967860] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.967867] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1121.968618] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1121.968627] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.127841] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.127854] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.127860] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.127867] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.128335] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.128341] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.187843] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.187856] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.187861] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.187869] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.188331] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.188337] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.247841] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.247854] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.247859] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.247867] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.248601] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.248609] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.307843] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.307856] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.307862] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.307869] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.308324] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.308330] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.367832] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.367846] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.367852] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.367860] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.368593] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.368601] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.427843] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.427856] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.427862] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.427869] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.428317] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.428323] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.487841] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.487854] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.487860] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.487867] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.488586] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.488594] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.547845] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.547858] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.547864] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.547871] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.548309] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.548315] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.607841] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.607854] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.607860] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.607867] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.608578] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.608586] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.667843] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.667856] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.667862] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.667870] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.668302] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.668308] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.727841] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.727854] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.727860] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.727867] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.728571] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.728579] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.787843] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.787856] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.787862] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.787869] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.788294] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.788300] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.847841] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.847854] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.847860] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.847867] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.848563] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.848571] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.907846] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.907861] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.907868] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.907875] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.908287] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.908293] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.967845] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.967861] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.967867] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.967875] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1122.968552] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1122.968561] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.027851] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.027866] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.027872] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.027880] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.028282] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.028288] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.087847] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.087862] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.087868] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.087875] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.088553] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.088563] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.147853] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.147869] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.147875] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.147882] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.148275] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.148281] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.207849] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.207864] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.207870] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.207877] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.208546] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.208555] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.267848] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.267863] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.267869] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.267876] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.268265] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.268271] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.327846] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.327860] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.327866] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.327874] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.328539] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.328548] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.387850] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.387865] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.387871] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.387878] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.388259] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.388265] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.447843] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.447857] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.447862] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.447870] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.448530] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.448539] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.507845] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.507858] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.507864] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.507871] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.508250] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.508256] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.567835] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.567850] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.567855] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.567863] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.568520] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.568529] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.627844] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.627857] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.627863] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.627870] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.628389] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.628397] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.686365] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.686378] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.686384] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.686391] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.686737] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.686743] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.711178] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.711191] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.711197] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.711204] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.711737] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.711743] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.771177] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.771189] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.771195] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.771203] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.772255] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.772263] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.831175] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.831188] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.831193] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.831201] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.831753] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.831761] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.891176] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.891189] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.891195] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.891202] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.892247] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.892256] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.951174] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.951187] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.951193] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.951200] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1123.951741] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1123.951749] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.011177] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.011190] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1124.011196] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.011203] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.012241] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1124.012249] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.071174] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.071187] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1124.071193] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.071200] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.071732] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1124.071740] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.131176] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.131189] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1124.131195] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.131202] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.132233] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1124.132241] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.191164] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.191177] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1124.191183] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.191190] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.191801] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1124.191808] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.251176] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.251189] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1124.251194] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.251202] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.252224] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1124.252232] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.311174] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.311187] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1124.311193] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.311200] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.311715] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1124.311724] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.371176] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.371189] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1124.371195] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.371202] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1124.372217] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800600 schedule
[ 1124.372225] usb 1-2.2: link qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1136.281164] ehci_hcd 0000:00:13.2: remove, state 4
[ 1136.281171] ehci_hcd 0000:00:13.2: roothub graceful disconnect
[ 1136.281184] usb usb2: USB disconnect, address 1
[ 1136.281189] usb usb2: unregistering device
[ 1136.281193] usb usb2: usb_disable_device nuking all URBs
[ 1136.281201] usb usb2: unregistering interface 2-0:1.0
[ 1136.281298] usb 2-0:1.0: uevent
[ 1136.281613] usb usb2: uevent
[ 1136.281743] ehci_hcd 0000:00:13.2: stop
[ 1136.281761] ehci_hcd 0000:00:13.2: reset command 01000a (park)=0 ithresh=1
period=256 Reset HALT
[ 1136.281792] ehci_hcd 0000:00:13.2: irq normal 0 err 0 reclaim 0 (lost 0)
[ 1136.281797] ehci_hcd 0000:00:13.2: complete 0 unlink 0
[ 1136.281806] ehci_hcd 0000:00:13.2: ehci_stop completed status 1000 Halt
[ 1136.281819] ehci_hcd 0000:00:13.2: USB bus 2 deregistered
[ 1136.282601] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 1136.282621] ehci_hcd 0000:00:12.2: remove, state 1
[ 1136.282625] ehci_hcd 0000:00:12.2: roothub graceful disconnect
[ 1136.282639] usb usb1: USB disconnect, address 1
[ 1136.282643] usb 1-2: USB disconnect, address 2
[ 1136.282647] usb 1-2.2: USB disconnect, address 3
[ 1136.282652] usb 1-2.2: unregistering device
[ 1136.282656] usb 1-2.2: usb_disable_device nuking all URBs
[ 1136.282695] usb 1-2.2: unlink qh8-0601/ffff8800c7800600 start 3 [1/2 us]
[ 1136.282708] ehci_hcd 0000:00:12.2: shutdown urb ffff880233964f00 ep1in-intr
[ 1136.282717] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 1136.282726] ehci_hcd 0000:00:12.2: shutdown urb ffff880234163840 ep2in-intr
[ 1136.282732] usb 1-2.2: unregistering interface 1-2.2:1.0
[ 1136.307349] usb 1-2.2:1.0: uevent
[ 1136.307462] usb 1-2.2: unregistering interface 1-2.2:1.1
[ 1136.331905] drivers/usb/core/file.c: removing 96 minor
[ 1136.333098] usb 1-2.2:1.1: uevent
[ 1136.335323] usb 1-2.2: uevent
[ 1136.335452] usb 1-2.4: USB disconnect, address 4
[ 1136.335458] usb 1-2.4: unregistering device
[ 1136.335462] usb 1-2.4: usb_disable_device nuking all URBs
[ 1136.335472] usb 1-2.4: unregistering interface 1-2.4:128.0
[ 1136.340302] usb 1-2.4:128.0: uevent
[ 1136.340551] usb 1-2.4: uevent
[ 1136.340577] usb 1-2: unregistering device
[ 1136.340582] usb 1-2: usb_disable_device nuking all URBs
[ 1136.340593] usb 1-2: unlink qh256-0001/ffff8800c7800180 start 1 [1/0 us]
[ 1136.340663] ehci_hcd 0000:00:12.2: shutdown urb ffff880234184840 ep1in-intr
[ 1136.340669] usb 1-2: unregistering interface 1-2:1.0
[ 1136.340753] usb 1-2:1.0: uevent
[ 1136.341111] usb 1-2: uevent
[ 1136.341750] usb usb1: unregistering device
[ 1136.341755] usb usb1: usb_disable_device nuking all URBs
[ 1136.341764] ehci_hcd 0000:00:12.2: shutdown urb ffff880234d37540 ep1in-intr
[ 1136.341770] usb usb1: unregistering interface 1-0:1.0
[ 1136.341872] usb 1-0:1.0: uevent
[ 1136.342167] usb usb1: uevent
[ 1136.342307] ehci_hcd 0000:00:12.2: stop
[ 1136.342435] ehci_hcd 0000:00:12.2: reset command 01000a (park)=0 ithresh=1
period=256 Reset HALT
[ 1136.342698] ehci_hcd 0000:00:12.2: irq normal 24498 err 6 reclaim 1156
(lost 0)
[ 1136.342705] ehci_hcd 0000:00:12.2: complete 24750 unlink 3
[ 1136.342714] ehci_hcd 0000:00:12.2: ehci_stop completed status 1000 Halt
[ 1136.342726] ehci_hcd 0000:00:12.2: USB bus 1 deregistered
[ 1136.343452] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 1140.039868] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1140.039876] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
[ 1140.039932] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 1140.039999] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1140.040032] drivers/usb/core/inode.c: creating file 'devices'
[ 1140.040041] drivers/usb/core/inode.c: creating file '001'
[ 1140.040210] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 1140.040227] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2
pcc=3 ordered !ppc ports=6
[ 1140.040237] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes
256/512/1024
[ 1140.040274] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze
workaround
[ 1140.040289] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 1140.040310] ehci_hcd 0000:00:12.2: debug port 1
[ 1140.040318] ehci_hcd 0000:00:12.2: MWI active
[ 1140.040322] ehci_hcd 0000:00:12.2: supports USB remote wakeup
[ 1140.040342] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 1140.040351] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 1140.040364] ehci_hcd 0000:00:12.2: init command 010009 (park)=0 ithresh=1
period=256 RUN
[ 1140.057423] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1140.057475] usb usb1: default language 0x0409
[ 1140.057491] usb usb1: udev 1, busnum 1, minor = 0
[ 1140.057496] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1140.057501] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1140.057507] usb usb1: Product: EHCI Host Controller
[ 1140.057511] usb usb1: Manufacturer: Linux 2.6.31r4 ehci_hcd
[ 1140.057515] usb usb1: SerialNumber: 0000:00:12.2
[ 1140.057613] usb usb1: uevent
[ 1140.057747] usb usb1: usb_probe_device
[ 1140.057754] usb usb1: configuration #1 chosen from 1 choice
[ 1140.057770] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1140.057802] usb 1-0:1.0: uevent
[ 1140.057876] hub 1-0:1.0: usb_probe_interface
[ 1140.057881] hub 1-0:1.0: usb_probe_interface - got id
[ 1140.057886] hub 1-0:1.0: USB hub found
[ 1140.057907] hub 1-0:1.0: 6 ports detected
[ 1140.057910] hub 1-0:1.0: standalone hub
[ 1140.057914] hub 1-0:1.0: no power switching (usb 1.0)
[ 1140.057918] hub 1-0:1.0: individual port over-current protection
[ 1140.057924] hub 1-0:1.0: power on to power good time: 20ms
[ 1140.057933] hub 1-0:1.0: local power source is good
[ 1140.057939] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1140.057992] drivers/usb/core/inode.c: creating file '001'
[ 1140.058056] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 1140.058094] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1140.058108] drivers/usb/core/inode.c: creating file '002'
[ 1140.058806] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 1140.058822] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2
pcc=3 ordered !ppc ports=6
[ 1140.058831] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes
256/512/1024
[ 1140.058866] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze
workaround
[ 1140.058880] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 1140.058901] ehci_hcd 0000:00:13.2: debug port 1
[ 1140.058908] ehci_hcd 0000:00:13.2: MWI active
[ 1140.058912] ehci_hcd 0000:00:13.2: supports USB remote wakeup
[ 1140.058931] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 1140.058941] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 1140.058953] ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1
period=256 RUN
[ 1140.067429] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1140.067476] usb usb2: default language 0x0409
[ 1140.067489] usb usb2: udev 1, busnum 2, minor = 128
[ 1140.067494] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1140.067499] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1140.067504] usb usb2: Product: EHCI Host Controller
[ 1140.067508] usb usb2: Manufacturer: Linux 2.6.31r4 ehci_hcd
[ 1140.067512] usb usb2: SerialNumber: 0000:00:13.2
[ 1140.067601] usb usb2: uevent
[ 1140.068855] usb usb2: usb_probe_device
[ 1140.068862] usb usb2: configuration #1 chosen from 1 choice
[ 1140.068878] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1140.068915] usb 2-0:1.0: uevent
[ 1140.069951] hub 2-0:1.0: usb_probe_interface
[ 1140.069958] hub 2-0:1.0: usb_probe_interface - got id
[ 1140.069963] hub 2-0:1.0: USB hub found
[ 1140.069980] hub 2-0:1.0: 6 ports detected
[ 1140.069984] hub 2-0:1.0: standalone hub
[ 1140.069987] hub 2-0:1.0: no power switching (usb 1.0)
[ 1140.069991] hub 2-0:1.0: individual port over-current protection
[ 1140.069996] hub 2-0:1.0: power on to power good time: 20ms
[ 1140.070004] hub 2-0:1.0: local power source is good
[ 1140.070009] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1140.071990] drivers/usb/core/inode.c: creating file '001'
[ 1140.157412] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001803 POWER
sig=j CSC CONNECT
[ 1140.157415] hub 1-0:1.0: port 2: status 0501 change 0001
[ 1140.170759] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1140.257426] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000
[ 1140.257447] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 1140.311193] ehci_hcd 0000:00:12.2: port 2 high speed
[ 1140.311204] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 1140.364512] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1140.417865] ehci_hcd 0000:00:12.2: port 2 high speed
[ 1140.417876] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 1140.489350] usb 1-2: default language 0x0409
[ 1140.489723] usb 1-2: udev 2, busnum 1, minor = 1
[ 1140.489728] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 1140.489733] usb 1-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 1140.489738] usb 1-2: Product: USB2.0 Hub
[ 1140.489852] usb 1-2: uevent
[ 1140.489887] usb 1-2: usb_probe_device
[ 1140.489893] usb 1-2: configuration #1 chosen from 1 choice
[ 1140.490113] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
[ 1140.490151] usb 1-2:1.0: uevent
[ 1140.490177] hub 1-2:1.0: usb_probe_interface
[ 1140.490182] hub 1-2:1.0: usb_probe_interface - got id
[ 1140.490187] hub 1-2:1.0: USB hub found
[ 1140.490474] hub 1-2:1.0: 4 ports detected
[ 1140.490478] hub 1-2:1.0: standalone hub
[ 1140.490482] hub 1-2:1.0: individual port power switching
[ 1140.490487] hub 1-2:1.0: individual port over-current protection
[ 1140.490491] hub 1-2:1.0: Single TT
[ 1140.490496] hub 1-2:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 1140.490501] hub 1-2:1.0: Port indicators are supported
[ 1140.490506] hub 1-2:1.0: power on to power good time: 100ms
[ 1140.490967] hub 1-2:1.0: local power source is good
[ 1140.490973] hub 1-2:1.0: enabling power on all ports
[ 1140.493261] drivers/usb/core/inode.c: creating file '002'
[ 1140.591722] hub 1-2:1.0: port 2: status 0301 change 0001
[ 1140.592467] hub 1-2:1.0: port 4: status 0101 change 0001
[ 1140.691175] usb 1-2: link qh256-0001/ffff8800c7809180 start 1 [1/0 us]
[ 1140.691194] hub 1-2:1.0: state 7 ports 4 chg 0014 evt 0000
[ 1140.691475] hub 1-2:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[ 1140.758506] usb 1-2.2: new low speed USB device using ehci_hcd and address
3
[ 1140.845607] usb 1-2.2: skipped 1 descriptor after interface
[ 1140.845615] usb 1-2.2: skipped 1 descriptor after interface
[ 1140.846094] usb 1-2.2: default language 0x0409
[ 1140.848221] usb 1-2.2: udev 3, busnum 1, minor = 2
[ 1140.848228] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518
[ 1140.848233] usb 1-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1140.848238] usb 1-2.2: Product: USB Receiver
[ 1140.848242] usb 1-2.2: Manufacturer: Logitech
[ 1140.848347] usb 1-2.2: uevent
[ 1140.848374] usb 1-2.2: usb_probe_device
[ 1140.848380] usb 1-2.2: configuration #1 chosen from 1 choice
[ 1140.855729] usb 1-2.2: adding 1-2.2:1.0 (config #1, interface 0)
[ 1140.855777] usb 1-2.2:1.0: uevent
[ 1140.855811] usbhid 1-2.2:1.0: usb_probe_interface
[ 1140.855815] usbhid 1-2.2:1.0: usb_probe_interface - got id
[ 1140.856198] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42
[ 1140.859294] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input5
[ 1140.859433] generic-usb 0003:046D:C518.0003: input,hidraw0: USB HID v1.11
Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input0
[ 1140.859466] usb 1-2.2: adding 1-2.2:1.1 (config #1, interface 1)
[ 1140.859501] usb 1-2.2:1.1: uevent
[ 1140.859527] usbhid 1-2.2:1.1: usb_probe_interface
[ 1140.859531] usbhid 1-2.2:1.1: usb_probe_interface - got id
[ 1140.860197] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42
[ 1140.865044] usb 1-2.2:1.0: uevent
[ 1140.865210] usb 1-2.2: uevent
[ 1140.866779] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input6
[ 1140.866804] usb 1-2.2: link qh8-0601/ffff8800c7809300 start 2 [1/2 us]
[ 1140.866864] drivers/usb/core/file.c: looking for a minor, starting at 96
[ 1140.866972] generic-usb 0003:046D:C518.0004: input,hiddev96,hidraw1: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input1
[ 1140.867006] drivers/usb/core/inode.c: creating file '003'
[ 1140.867236] usb 1-2.2:1.0: uevent
[ 1140.868308] hub 1-2:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 1140.869364] usb 1-2.2:1.0: uevent
[ 1140.869547] usb 1-2.2: uevent
[ 1140.872164] usb 1-2.2:1.0: uevent
[ 1140.872695] usb 1-2.2:1.1: uevent
[ 1140.872865] usb 1-2.2: uevent
[ 1140.876484] usb 1-2.2:1.1: uevent
[ 1140.897853] usb 1-2.2: link qh8-0601/ffff8800c78093c0 start 3 [1/2 us]
[ 1140.938244] usb 1-2.4: new high speed USB device using ehci_hcd and address
4
[ 1141.023311] usb 1-2.4: default language 0x0409
[ 1141.024431] usb 1-2.4: udev 4, busnum 1, minor = 3
[ 1141.024432] usb 1-2.4: New USB device found, idVendor=0781, idProduct=7421
[ 1141.024434] usb 1-2.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1141.024436] usb 1-2.4: Product: Sansa e260
[ 1141.024437] usb 1-2.4: Manufacturer: SanDisk
[ 1141.024438] usb 1-2.4: SerialNumber:
00000000-00000000-8911b49b-9905e904-00000000
[ 1141.024507] usb 1-2.4: uevent
[ 1141.024520] usb 1-2.4: usb_probe_device
[ 1141.024522] usb 1-2.4: configuration #128 chosen from 1 choice
[ 1141.043813] usb 1-2.4: adding 1-2.4:128.0 (config #128, interface 0)
[ 1141.043833] usb 1-2.4:128.0: uevent
[ 1141.043848] usb-storage 1-2.4:128.0: usb_probe_interface
[ 1141.043851] usb-storage 1-2.4:128.0: usb_probe_interface - got id
[ 1141.047555] scsi7 : SCSI emulation for USB Mass Storage devices
[ 1141.047781] usb-storage: device found at 4
[ 1141.047787] usb-storage: waiting for device to settle before scanning
[ 1141.047785] drivers/usb/core/inode.c: creating file '004'
[ 1141.047811] hub 1-2:1.0: state 7 ports 4 chg 0000 evt 0004
[ 1142.317838] hub 2-0:1.0: hub_suspend
[ 1142.317853] usb usb2: bus auto-suspend
[ 1142.317859] ehci_hcd 0000:00:13.2: suspend root hub

2009-09-14 18:16:02

by Volker Armin Hemmann

[permalink] [raw]
Subject: Re: 2.6.31 ehci problem - mouse dead on scroll

Hi,
found the problem. Was stupid brain fart when doing menuconfig or something
like that.

I turned off
USB selective suspend/resume and wakeup

and turned on
Root Hub Transaction Translators
Improved Transaction Translator scheduling

and haven't had any lockup anymore.

Sorry for the noise. Really.

Gl?ck Auf,
Volker

2009-09-14 20:34:11

by Oliver Neukum

[permalink] [raw]
Subject: Re: 2.6.31 ehci problem - mouse dead on scroll

Am Montag, 14. September 2009 20:15:56 schrieb Volker Armin Hemmann:
> I turned off
> USB selective suspend/resume and wakeup
>
> and turned on
> Root Hub Transaction Translators
> ?Improved Transaction Translator scheduling
>
> and haven't had any lockup anymore.
>
> Sorry for the noise. Really.

Can you please find out whether all the options you found are needed?

Regards
Oliver

2009-09-14 20:48:17

by Volker Armin Hemmann

[permalink] [raw]
Subject: Re: 2.6.31 ehci problem - mouse dead on scroll

On Montag 14 September 2009, Oliver Neukum wrote:
> Am Montag, 14. September 2009 20:15:56 schrieb Volker Armin Hemmann:
> > I turned off
> > USB selective suspend/resume and wakeup
> >
> > and turned on
> > Root Hub Transaction Translators
> > Improved Transaction Translator scheduling
> >
> > and haven't had any lockup anymore.
> >
> > Sorry for the noise. Really.
>
> Can you please find out whether all the options you found are needed?
>
> Regards
> Oliver
>

sure, will do. But not tonight and I am away on Tuesday and most part of
Wednesday..
I will report back on Wednesday/Thursday with some results.

Gl?ck Auf,
Volker

2009-09-16 11:56:50

by Volker Armin Hemmann

[permalink] [raw]
Subject: Re: 2.6.31 ehci problem - mouse dead on scroll

On Montag 14 September 2009, Oliver Neukum wrote:
> Am Montag, 14. September 2009 20:15:56 schrieb Volker Armin Hemmann:
> > I turned off
> > USB selective suspend/resume and wakeup
> >
> > and turned on
> > Root Hub Transaction Translators
> > Improved Transaction Translator scheduling
> >
> > and haven't had any lockup anymore.
> >
> > Sorry for the noise. Really.
>
> Can you please find out whether all the options you found are needed?
>
> Regards
> Oliver
>

ok, I am done. Was back earlier then expected and had an all-awake-night, so
lots of time:

with
USB selective suspend/resume and wakeup on

Root Hub Transaction Translators off
Improved Transaction Translator scheduling off

mouse unusable


with
USB selective suspend/resume and wakeup on

Root Hub Transaction Translators on
Improved Transaction Translator scheduling on

mouse is fine


with
USB selective suspend/resume and wakeup off

Root Hub Transaction Translators on
Improved Transaction Translator scheduling on

mouse is fine


with
USB selective suspend/resume and wakeup on

Root Hub Transaction Translators on
Improved Transaction Translator scheduling off

mouse is fine


with
USB selective suspend/resume and wakeup on

Root Hub Transaction Translators off
Improved Transaction Translator scheduling on

mouse is fine


with
USB selective suspend/resume and wake off

Root Hub Transaction Translators off
Improved Transaction Translator scheduling off

mouse locks up after a couple of minutes, but not as bad as with
USB selective suspend/resume and wake
on.

BUT: The last one (all off) I am only trying it for ~20min at the moment and
had 1 lockup
with USB selective suspend/resume and wake on I had sometimes 10 minutes or so
without lockup too.
The difference so far, with that option set, I have douzends of lockups.
Without I had one and it is harder to trigger.

The other combinations I ran for 1-3h and doing all the stuff that usually
results in the problem (fast scrolling, fast moving the mouse a lot with lots
changes in direction aka 'shrubbing the desk').

So the problem exists, USB selective suspend/resume and wake makes it worse,
and any of the Translator options make it go away.


dmesg from lockup:

[ 0.000000] Linux version 2.6.31r4 (root@energy) (gcc version 4.4.1 (Gentoo
4.4.1 p1.0) ) #8 SMP Wed Sep 16 04:10:01 CEST 2009
[ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3
nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable)
[ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000238000000 aka 9088M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xc7eb0 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000c7eb0000 (usable)
[ 0.000000] modified: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
[ 0.000000] modified: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS)
[ 0.000000] modified: 00000000c7ef0000 - 00000000c7f00000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000238000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7eb0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] 00c7e00000 - 00c7eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to c7eb0000 @ 10000-13000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0238000000 page 2M
[ 0.000000] kernel direct mapping tables up to 238000000 @ 12000-14000
[ 0.000000] ACPI: RSDP 00000000000fa7c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7eb0000 00040 (v01 050609 RSDT2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7eb0200 00084 (v02 A M I OEMFACP 12000601
MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7eb0440 08512 (v01 AS140 AS140121 00000121
INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7ec0000 00040
[ 0.000000] ACPI: APIC 00000000c7eb0390 0006C (v01 050609 APIC2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7eb0400 0003C (v01 050609 OEMMCFG 20090506
MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7ec0040 00071 (v01 050609 OEMB2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000c7eb8960 00027 (v01 050609 OEMAAFT 20090506
MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000c7eb8990 00038 (v01 050609 OEMHPET 20090506
MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7eb89d0 0088C (v01 A M I POWERNOW 00000001
AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0238000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
- 0000008000]
[ 0.000000] #2 [0001000000 - 00015f68c0] TEXT DATA BSS ==> [0001000000
- 00015f68c0]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00
- 0000100000]
[ 0.000000] #4 [00015f7000 - 00015f7133] BRK ==> [00015f7000
- 00015f7133]
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000
- 0000012000]
[ 0.000000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000
- 0000013000]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-
ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00238000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000c7eb0
[ 0.000000] 0: 0x00100000 -> 0x00238000
[ 0.000000] On node 0 totalpages: 2096703
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3825 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 800488 pages, LIFO batch:31
[ 0.000000] Normal zone: 17472 pages used for memmap
[ 0.000000] Normal zone: 1260480 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c7eb0000 -
00000000c7ec0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ec0000 -
00000000c7ef0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ef0000 -
00000000c7f00000
[ 0.000000] PM: Registered nosave memory: 00000000c7f00000 -
00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at c7f00000 (gap:
c7f00000:38000000)
[ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages at ffff880028034000, static data 71904
bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 2064793
[ 0.000000] Kernel command line: root=/dev/md1
md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] md: Will configure md3 (super-block) from
/dev/sda3,/dev/sdb3,/dev/sdc3, below.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 2a02000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 -
0000000024000000
[ 0.000000] Memory: 8184476k/9306112k available (3484k kernel code, 919300k
absent, 201360k reserved, 1750k data, 376k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3199.763 MHz processor.
[ 0.000612] Console: colour VGA+ 80x25
[ 0.000614] console [tty0] enabled
[ 0.003333] hpet clockevent registered
[ 0.003333] alloc irq_desc for 24 on node 0
[ 0.003333] alloc kstat_irqs on node 0
[ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu
timer
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6402.16 BogoMIPS (lpj=10665863)
[ 0.003422] Mount-cache hash table entries: 256
[ 0.003546] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003582] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003616] tseg: 0000000000
[ 0.003622] CPU: Physical Processor ID: 0
[ 0.003656] CPU: Processor Core ID: 0
[ 0.003689] mce: CPU supports 6 MCE banks
[ 0.003729] using C1E aware idle routine
[ 0.003773] ACPI: Core revision 20090521
[ 0.016707] Setting APIC routing to flat
[ 0.017032] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.051000] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.053332] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666963)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] mce: CPU supports 6 MCE banks
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
[ 0.144155] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.144504] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.146698] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.003333] Initializing CPU#2
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666967)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 2
[ 0.003333] mce: CPU supports 6 MCE banks
[ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new
0x7010600070106
[ 0.240808] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.241156] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.243372] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.003333] Initializing CPU#3
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666962)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 3
[ 0.003333] mce: CPU supports 6 MCE banks
[ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new
0x7010600070106
[ 0.337566] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.337917] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.340007] Brought up 4 CPUs
[ 0.340041] Total of 4 processors activated (25610.72 BogoMIPS).
[ 0.340110] CPU0 attaching sched-domain:
[ 0.340112] domain 0: span 0-3 level MC
[ 0.340114] groups: 0 1 2 3
[ 0.340117] CPU1 attaching sched-domain:
[ 0.340118] domain 0: span 0-3 level MC
[ 0.340119] groups: 1 2 3 0
[ 0.340122] CPU2 attaching sched-domain:
[ 0.340123] domain 0: span 0-3 level MC
[ 0.340124] groups: 2 3 0 1
[ 0.340126] CPU3 attaching sched-domain:
[ 0.340127] domain 0: span 0-3 level MC
[ 0.340128] groups: 3 0 1 2
[ 0.340394] xor: automatically using best checksumming function:
generic_sse
[ 0.356667] generic_sse: 12835.200 MB/sec
[ 0.356701] xor: using function: generic_sse (12835.200 MB/sec)
[ 0.356755] Time: 13:29:25 Date: 09/16/09
[ 0.356804] NET: Registered protocol family 16
[ 0.357122] node 0 link 0: io port [1000, ffffff]
[ 0.357124] TOM: 00000000c8000000 aka 3200M
[ 0.357158] Fam 10h mmconf [e0000000, efffffff]
[ 0.357160] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.357162] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.357164] node 0 link 0: mmio [a0000, bffff]
[ 0.357166] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.357167] TOM2: 0000000238000000 aka 9088M
[ 0.357201] bus: [00,07] on node 0 link 0
[ 0.357202] bus: 00 index 0 io port: [0, ffff]
[ 0.357204] bus: 00 index 1 mmio: [f0000000, ffffffff]
[ 0.357205] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.357206] bus: 00 index 3 mmio: [c8000000, dfffffff]
[ 0.357207] bus: 00 index 4 mmio: [238000000, fcffffffff]
[ 0.357220] ACPI: bus type pci registered
[ 0.357325] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.357361] PCI: Not using MMCONFIG.
[ 0.357395] PCI: Using configuration type 1 for base access
[ 0.357429] PCI: Using configuration type 1 for extended access
[ 0.359454] bio: create slab <bio-0> at 0
[ 0.359919] ACPI: EC: Look up EC in DSDT
[ 0.367323] ACPI: Interpreter enabled
[ 0.367359] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.367963] ACPI: Using IOAPIC for interrupt routing
[ 0.368035] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.370745] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.376143] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.381448] ACPI: No dock devices found.
[ 0.381744] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.381856] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.381902] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.381937] pci 0000:00:02.0: PME# disabled
[ 0.382005] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.382040] pci 0000:00:09.0: PME# disabled
[ 0.382100] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.382135] pci 0000:00:0a.0: PME# disabled
[ 0.382215] pci 0000:00:11.0: reg 10 io port: [0xa000-0xa007]
[ 0.382221] pci 0000:00:11.0: reg 14 io port: [0x9000-0x9003]
[ 0.382227] pci 0000:00:11.0: reg 18 io port: [0x8000-0x8007]
[ 0.382232] pci 0000:00:11.0: reg 1c io port: [0x7000-0x7003]
[ 0.382238] pci 0000:00:11.0: reg 20 io port: [0x6000-0x600f]
[ 0.382244] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff]
[ 0.382293] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff]
[ 0.382344] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff]
[ 0.382413] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.382462] pci 0000:00:12.2: supports D1 D2
[ 0.382464] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.382500] pci 0000:00:12.2: PME# disabled
[ 0.382562] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff]
[ 0.382613] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff]
[ 0.382682] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff]
[ 0.382731] pci 0000:00:13.2: supports D1 D2
[ 0.382732] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.382769] pci 0000:00:13.2: PME# disabled
[ 0.382911] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.382917] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.382923] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.382928] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.382934] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.383059] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff]
[ 0.383193] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.383200] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff]
[ 0.383205] pci 0000:02:00.0: reg 20 io port: [0xc000-0xc0ff]
[ 0.383212] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 0.383227] pci 0000:02:00.0: supports D1 D2
[ 0.383255] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff]
[ 0.383286] pci 0000:02:00.1: supports D1 D2
[ 0.383338] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[ 0.383340] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.383343] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.383387] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
[ 0.383389] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfebfffff]
[ 0.383392] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff]
[ 0.383422] pci 0000:01:00.0: reg 10 io port: [0xb800-0xb8ff]
[ 0.383436] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff]
[ 0.383445] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff]
[ 0.383451] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff]
[ 0.383478] pci 0000:01:00.0: supports D1 D2
[ 0.383479] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.383516] pci 0000:01:00.0: PME# disabled
[ 0.383602] pci 0000:00:0a.0: bridge io port: [0xb000-0xbfff]
[ 0.383604] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.383607] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.383642] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff]
[ 0.383722] pci 0000:05:08.0: reg 10 io port: [0xe800-0xe83f]
[ 0.383780] pci 0000:05:08.0: supports D1 D2
[ 0.383822] pci 0000:00:14.4: transparent bridge
[ 0.383858] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[ 0.383864] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff]
[ 0.383876] pci_bus 0000:00: on NUMA node 0
[ 0.383879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.384013] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.384061] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.384106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.384172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.387104] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.387334] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.387562] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.387790] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.388018] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0,
disabled.
[ 0.388292] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15)
[ 0.388520] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
[ 0.388734] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
[ 0.389097] SCSI subsystem initialized
[ 0.389192] libata version 3.00 loaded.
[ 0.389252] usbcore: registered new interface driver usbfs
[ 0.389308] usbcore: registered new interface driver hub
[ 0.389373] usbcore: registered new device driver usb
[ 0.443345] raid6: int64x1 2763 MB/s
[ 0.500013] raid6: int64x2 3866 MB/s
[ 0.556669] raid6: int64x4 2869 MB/s
[ 0.613341] raid6: int64x8 2535 MB/s
[ 0.670016] raid6: sse2x1 3994 MB/s
[ 0.726669] raid6: sse2x2 6495 MB/s
[ 0.783339] raid6: sse2x4 7974 MB/s
[ 0.783373] raid6: using algorithm sse2x4 (7974 MB/s)
[ 0.783458] PCI: Using ACPI for IRQ routing
[ 0.783497] pci 0000:00:00.0: BAR 3: address space collision on of device
[0xe0000000-0xffffffff]
[ 0.783551] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.796895] PCI-DMA: Disabling AGP.
[ 0.797017] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.797052] PCI-DMA: using GART IOMMU.
[ 0.797087] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.798881] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.798989] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.803362] hpet: hpet2 irq 24 for MSI
[ 0.810016] Switched to high resolution mode on CPU 0
[ 0.811167] Switched to high resolution mode on CPU 2
[ 0.811183] Switched to high resolution mode on CPU 1
[ 0.811263] Switched to high resolution mode on CPU 3
[ 0.823369] pnp: PnP ACPI init
[ 0.823419] ACPI: bus type pnp registered
[ 0.825667] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3
(0x0-0x1fffffff), disabling
[ 0.825722] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0
BAR 3 (0x0-0x1fffffff), disabling
[ 0.825777] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0
BAR 3 (0x0-0x1fffffff), disabling
[ 0.825832] pnp 00:0b: mem resource (0x100000-0xc7efffff) overlaps
0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.826140] pnp: PnP ACPI: found 12 devices
[ 0.826174] ACPI: ACPI bus type pnp unregistered
[ 0.826215] system 00:06: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.826269] system 00:06: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.826306] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.826341] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.826377] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.826412] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 0.826447] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 0.826482] system 00:07: ioport range 0xc50-0xc51 has been reserved
[ 0.826517] system 00:07: ioport range 0xc52-0xc52 has been reserved
[ 0.826552] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 0.826587] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 0.826622] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
[ 0.826657] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
[ 0.826698] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
[ 0.826733] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 0.826768] system 00:07: ioport range 0xcd8-0xcdf has been reserved
[ 0.826803] system 00:07: ioport range 0x800-0x89f has been reserved
[ 0.826839] system 00:07: ioport range 0xb00-0xb0f has been reserved
[ 0.826874] system 00:07: ioport range 0xb20-0xb3f has been reserved
[ 0.826909] system 00:07: ioport range 0x900-0x90f has been reserved
[ 0.826944] system 00:07: ioport range 0x910-0x91f has been reserved
[ 0.826979] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 0.827014] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.827050] system 00:07: iomem range 0xfec10000-0xfec1001f has been
reserved
[ 0.827087] system 00:09: ioport range 0x290-0x29f has been reserved
[ 0.827123] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.827160] system 00:0b: iomem range 0xfec00000-0xffffffff could not be
reserved
[ 0.832057] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.832092] pci 0000:00:02.0: IO window: 0xc000-0xcfff
[ 0.832128] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.832164] pci 0000:00:02.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.832219] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 0.832254] pci 0000:00:09.0: IO window: 0xd000-0xdfff
[ 0.832289] pci 0000:00:09.0: MEM window: 0xfe000000-0xfebfffff
[ 0.832325] pci 0000:00:09.0: PREFETCH window:
0x000000fa000000-0x000000fcefffff
[ 0.832380] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
[ 0.832415] pci 0000:00:0a.0: IO window: 0xb000-0xbfff
[ 0.832450] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff
[ 0.832485] pci 0000:00:0a.0: PREFETCH window:
0x000000cff00000-0x000000cfffffff
[ 0.832541] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
[ 0.832576] pci 0000:00:14.4: IO window: 0xe000-0xefff
[ 0.832614] pci 0000:00:14.4: MEM window: disabled
[ 0.832650] pci 0000:00:14.4: PREFETCH window: 0xfcf00000-0xfcffffff
[ 0.832691] alloc irq_desc for 18 on node -1
[ 0.832693] alloc kstat_irqs on node -1
[ 0.832696] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.832733] pci 0000:00:02.0: setting latency timer to 64
[ 0.832737] alloc irq_desc for 17 on node -1
[ 0.832738] alloc kstat_irqs on node -1
[ 0.832741] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.832776] pci 0000:00:09.0: setting latency timer to 64
[ 0.832780] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.832815] pci 0000:00:0a.0: setting latency timer to 64
[ 0.832822] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.832824] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.832825] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.832827] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff]
[ 0.832829] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.832830] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.832832] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfebfffff]
[ 0.832833] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff]
[ 0.832835] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.832836] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.832838] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.832839] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.832841] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff]
[ 0.832842] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.832844] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.832855] NET: Registered protocol family 2
[ 0.832911] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.833387] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 0.834370] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.834772] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.834807] TCP reno registered
[ 0.834887] NET: Registered protocol family 1
[ 0.836062] Scanning for low memory corruption every 60 seconds
[ 0.836794] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.836926] Loading Reiser4. See http://www.namesys.com for a description of
Reiser4.
[ 0.837011] msgmni has been set to 15987
[ 0.837314] alg: No test for stdrng (krng)
[ 0.837355] async_tx: api initialized (sync-only)
[ 0.837430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.837485] io scheduler noop registered
[ 0.837519] io scheduler cfq registered (default)
[ 0.837642] pci 0000:02:00.0: Boot video device
[ 0.837731] alloc irq_desc for 25 on node -1
[ 0.837732] alloc kstat_irqs on node -1
[ 0.837738] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.837743] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.837834] alloc irq_desc for 26 on node -1
[ 0.837835] alloc kstat_irqs on node -1
[ 0.837838] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X
[ 0.837842] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.837932] alloc irq_desc for 27 on node -1
[ 0.837933] alloc kstat_irqs on node -1
[ 0.837936] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X
[ 0.837939] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 0.838136] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.838189] ACPI: Power Button [PWRF]
[ 0.838281] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.838335] ACPI: Power Button [PWRB]
[ 0.838485] processor LNXCPU:00: registered as cooling_device0
[ 0.838520] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.838617] processor LNXCPU:01: registered as cooling_device1
[ 0.838686] processor LNXCPU:02: registered as cooling_device2
[ 0.838757] processor LNXCPU:03: registered as cooling_device3
[ 0.842424] Linux agpgart interface v0.103
[ 0.842616] ahci 0000:00:11.0: version 3.0
[ 0.842625] alloc irq_desc for 22 on node -1
[ 0.842626] alloc kstat_irqs on node -1
[ 0.842630] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.842778] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f
impl SATA mode
[ 0.842832] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
slum part
[ 0.843386] scsi0 : ahci
[ 0.843513] scsi1 : ahci
[ 0.843610] scsi2 : ahci
[ 0.843705] scsi3 : ahci
[ 0.843803] scsi4 : ahci
[ 0.843899] scsi5 : ahci
[ 0.844031] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed
irq 22
[ 0.844085] ata2: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff980 irq
22
[ 0.844140] ata3: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa00 irq
22
[ 0.844195] ata4: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa80 irq
22
[ 0.844249] ata5: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb00 irq
22
[ 0.844304] ata6: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb80 irq
22
[ 0.844549] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.844584] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.845080] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.845201] mice: PS/2 mouse device common for all mice
[ 0.845350] rtc_cmos 00:02: RTC can wake from S4
[ 0.845414] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.845470] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.845525] md: raid1 personality registered for level 1
[ 0.845560] md: raid6 personality registered for level 6
[ 0.845594] md: raid5 personality registered for level 5
[ 0.845628] md: raid4 personality registered for level 4
[ 0.846212] cpuidle: using governor ladder
[ 0.846661] usbcore: registered new interface driver hiddev
[ 0.846723] usbcore: registered new interface driver usbhid
[ 0.846758] usbhid: v2.6:USB HID core driver
[ 0.846818] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 0.846852] ALSA device list:
[ 0.846885] No soundcards found.
[ 0.846954] TCP cubic registered
[ 0.846994] NET: Registered protocol family 10
[ 0.847130] IPv6 over IPv4 tunneling driver
[ 0.847273] NET: Registered protocol family 17
[ 0.847329] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor
processors (4 cpu cores) (version 2.20.00)
[ 0.847405] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 0.847439] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 0.847473] powernow-k8: 2 : pstate 2 (2100 MHz)
[ 0.847508] powernow-k8: 3 : pstate 3 (800 MHz)
[ 0.847905] PM: Resume from disk failed.
[ 0.847987] Magic number: 9:524:483
[ 0.870676] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 1.163787] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.163848] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.163901] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.164198] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.164257] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.170142] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
[ 1.170184] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.170231] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7
[ 1.170266] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.176638] ata4.00: configured for UDMA/133
[ 1.176694] ata2.00: configured for UDMA/133
[ 1.563786] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.570138] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7
[ 1.570174] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.576594] ata1.00: configured for UDMA/133
[ 1.587995] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0
PQ: 0 ANSI: 5
[ 1.588225] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.588240] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.588302] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0
PQ: 0 ANSI: 5
[ 1.588389] sd 0:0:0:0: [sda] Write Protect is off
[ 1.588415] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.588433] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.588434] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.588443] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.588497] sdb:
[ 1.588544] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.588603] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0
PQ: 0 ANSI: 5
[ 1.588682] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.588695] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.588704] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750
GB/698 GiB)
[ 1.588720] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.588722] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.588730] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.588770] sdc:
[ 1.588805] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.589014] sda: sdc1 sdc2 sdc3 sdc4 < sda1 sda2 sda3 sda4 < sdb1 sdb2
sdb3 sdb4 < sdc5 sda5 sdc6 sdb5 sda6 >
[ 1.614833] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.621354] sdb6 >
[ 1.621698] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.622960] sdc7 >
[ 1.623335] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.623379] md: Waiting for all devices to be available before autodetect
[ 1.623414] md: If you don't use raid, use raid=noautodetect
[ 1.623531] md: Autodetecting RAID arrays.
[ 1.721437] md: Scanned 12 and added 12 devices.
[ 1.721472] md: autorun ...
[ 1.721506] md: considering sdc6 ...
[ 1.721541] md: adding sdc6 ...
[ 1.721576] md: sdc5 has different UUID to sdc6
[ 1.721610] md: sdc3 has different UUID to sdc6
[ 1.721645] md: sdc1 has different UUID to sdc6
[ 1.721680] md: adding sdb6 ...
[ 1.721714] md: sdb5 has different UUID to sdc6
[ 1.721749] md: sdb3 has different UUID to sdc6
[ 1.721784] md: sdb1 has different UUID to sdc6
[ 1.721819] md: adding sda6 ...
[ 1.721853] md: sda5 has different UUID to sdc6
[ 1.721887] md: sda3 has different UUID to sdc6
[ 1.721922] md: sda1 has different UUID to sdc6
[ 1.722054] md: created md3
[ 1.722088] md: bind<sda6>
[ 1.722125] md: bind<sdb6>
[ 1.722162] md: bind<sdc6>
[ 1.722198] md: running: <sdc6><sdb6><sda6>
[ 1.722339] raid5: device sdc6 operational as raid disk 2
[ 1.722373] raid5: device sdb6 operational as raid disk 1
[ 1.722407] raid5: device sda6 operational as raid disk 0
[ 1.722561] raid5: allocated 3220kB for md3
[ 1.722608] raid5: raid level 5 set md3 active with 3 out of 3 devices,
algorithm 2
[ 1.722661] RAID5 conf printout:
[ 1.722694] --- rd:3 wd:3
[ 1.722728] disk 0, o:1, dev:sda6
[ 1.722761] disk 1, o:1, dev:sdb6
[ 1.722795] disk 2, o:1, dev:sdc6
[ 1.722841] md3: detected capacity change from 0 to 864065421312
[ 1.722898] md: considering sdc5 ...
[ 1.722934] md: adding sdc5 ...
[ 1.722968] md: sdc3 has different UUID to sdc5
[ 1.723003] md: sdc1 has different UUID to sdc5
[ 1.723038] md: adding sdb5 ...
[ 1.723072] md: sdb3 has different UUID to sdc5
[ 1.723107] md: sdb1 has different UUID to sdc5
[ 1.723142] md: adding sda5 ...
[ 1.723176] md: sda3 has different UUID to sdc5
[ 1.723211] md: sda1 has different UUID to sdc5
[ 1.723307] md: created md2
[ 1.723342] md: bind<sda5>
[ 1.723378] md: bind<sdb5>
[ 1.723416] md: bind<sdc5>
[ 1.723452] md: running: <sdc5><sdb5><sda5>
[ 1.723586] raid5: device sdc5 operational as raid disk 2
[ 1.723620] raid5: device sdb5 operational as raid disk 1
[ 1.723655] raid5: device sda5 operational as raid disk 0
[ 1.723813] raid5: allocated 3220kB for md2
[ 1.723859] raid5: raid level 5 set md2 active with 3 out of 3 devices,
algorithm 2
[ 1.723913] RAID5 conf printout:
[ 1.723946] --- rd:3 wd:3
[ 1.723979] disk 0, o:1, dev:sda5
[ 1.724012] disk 1, o:1, dev:sdb5
[ 1.724046] disk 2, o:1, dev:sdc5
[ 1.724090] md2: detected capacity change from 0 to 40007499776
[ 1.724146] md: considering sdc3 ...
[ 1.724181] md: adding sdc3 ...
[ 1.724216] md: sdc1 has different UUID to sdc3
[ 1.724251] md: adding sdb3 ...
[ 1.724285] md: sdb1 has different UUID to sdc3
[ 1.724321] md: adding sda3 ...
[ 1.724355] md: sda1 has different UUID to sdc3
[ 1.724452] md: created md1
[ 1.724486] md: bind<sda3>
[ 1.724523] md: bind<sdb3>
[ 1.724559] md: bind<sdc3>
[ 1.724599] md: running: <sdc3><sdb3><sda3>
[ 1.724733] raid5: device sdc3 operational as raid disk 2
[ 1.724767] raid5: device sdb3 operational as raid disk 1
[ 1.724802] raid5: device sda3 operational as raid disk 0
[ 1.724960] raid5: allocated 3220kB for md1
[ 1.725006] raid5: raid level 5 set md1 active with 3 out of 3 devices,
algorithm 2
[ 1.725059] RAID5 conf printout:
[ 1.725093] --- rd:3 wd:3
[ 1.725126] disk 0, o:1, dev:sda3
[ 1.725159] disk 1, o:1, dev:sdb3
[ 1.725193] disk 2, o:1, dev:sdc3
[ 1.725241] md1: detected capacity change from 0 to 79998877696
[ 1.725297] md: considering sdc1 ...
[ 1.725333] md: adding sdc1 ...
[ 1.725367] md: adding sdb1 ...
[ 1.725402] md: adding sda1 ...
[ 1.725436] md: created md0
[ 1.725469] md: bind<sda1>
[ 1.725505] md: bind<sdb1>
[ 1.725543] md: bind<sdc1>
[ 1.725579] md: running: <sdc1><sdb1><sda1>
[ 1.725747] raid1: raid set md0 active with 3 out of 3 mirrors
[ 1.725791] md0: detected capacity change from 0 to 65667072
[ 1.725845] md: ... autorun DONE.
[ 1.725897] md: Loading md3: /dev/sda3
[ 1.725935] md3: unknown partition table
[ 1.726092] md: couldn't update array info. -22
[ 1.726129] md: could not bd_claim sda3.
[ 1.726163] md: md_import_device returned -16
[ 1.726199] md: could not bd_claim sdb3.
[ 1.726233] md: md_import_device returned -16
[ 1.726269] md: could not bd_claim sdc3.
[ 1.726303] md: md_import_device returned -16
[ 1.726338] md: starting md3 failed
[ 1.726412] md1: unknown partition table
[ 1.773805] reiser4: md1: found disk format 4.0.0.
[ 5.791018] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1.
[ 5.791069] Freeing unused kernel memory: 376k freed
[ 9.028747] udev: starting version 145
[ 9.229559] md2:
[ 9.229712] md0: unknown partition table
[ 9.266552] unknown partition table
[ 10.399918] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.399933] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.400165] r8169 0000:01:00.0: setting latency timer to 64
[ 10.400196] alloc irq_desc for 28 on node -1
[ 10.400198] alloc kstat_irqs on node -1
[ 10.400207] r8169 0000:01:00.0: irq 28 for MSI/MSI-X
[ 10.400309] eth0: RTL8168c/8111c at 0xffffc90012fba000, 00:19:66:86:ce:12,
XID 3c4000c0 IRQ 28
[ 10.443002] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.443005] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
[ 10.443032] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 10.443071] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 10.443237] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 10.443244] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2
pcc=3 ordered !ppc ports=6
[ 10.443247] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes
256/512/1024
[ 10.443269] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze
workaround
[ 10.443275] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 10.443287] ehci_hcd 0000:00:12.2: debug port 1
[ 10.443292] ehci_hcd 0000:00:12.2: MWI active
[ 10.443293] ehci_hcd 0000:00:12.2: supports USB remote wakeup
[ 10.443307] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 10.443310] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 10.443315] ehci_hcd 0000:00:12.2: init command 010009 (park)=0 ithresh=1
period=256 RUN
[ 10.451257] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 10.451287] usb usb1: default language 0x0409
[ 10.451291] usb usb1: udev 1, busnum 1, minor = 0
[ 10.451292] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.451293] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.451295] usb usb1: Product: EHCI Host Controller
[ 10.451296] usb usb1: Manufacturer: Linux 2.6.31r4 ehci_hcd
[ 10.451297] usb usb1: SerialNumber: 0000:00:12.2
[ 10.451321] usb usb1: uevent
[ 10.451642] usb usb1: usb_probe_device
[ 10.451644] usb usb1: configuration #1 chosen from 1 choice
[ 10.451649] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 10.451658] usb 1-0:1.0: uevent
[ 10.451684] hub 1-0:1.0: usb_probe_interface
[ 10.451686] hub 1-0:1.0: usb_probe_interface - got id
[ 10.451687] hub 1-0:1.0: USB hub found
[ 10.451693] hub 1-0:1.0: 6 ports detected
[ 10.451694] hub 1-0:1.0: standalone hub
[ 10.451695] hub 1-0:1.0: no power switching (usb 1.0)
[ 10.451696] hub 1-0:1.0: individual port over-current protection
[ 10.451697] hub 1-0:1.0: power on to power good time: 20ms
[ 10.451700] hub 1-0:1.0: local power source is good
[ 10.451702] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 10.451743] alloc irq_desc for 19 on node -1
[ 10.451745] alloc kstat_irqs on node -1
[ 10.451749] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 10.451769] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 10.451810] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 10.451816] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2
pcc=3 ordered !ppc ports=6
[ 10.451819] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes
256/512/1024
[ 10.451832] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze
workaround
[ 10.451838] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 10.451851] ehci_hcd 0000:00:13.2: debug port 1
[ 10.451854] ehci_hcd 0000:00:13.2: MWI active
[ 10.451855] ehci_hcd 0000:00:13.2: supports USB remote wakeup
[ 10.451865] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 10.451868] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 10.451873] ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1
period=256 RUN
[ 10.461264] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 10.461284] usb usb2: default language 0x0409
[ 10.461288] usb usb2: udev 1, busnum 2, minor = 128
[ 10.461289] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.461290] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.461292] usb usb2: Product: EHCI Host Controller
[ 10.461293] usb usb2: Manufacturer: Linux 2.6.31r4 ehci_hcd
[ 10.461294] usb usb2: SerialNumber: 0000:00:13.2
[ 10.461316] usb usb2: uevent
[ 10.461357] usb usb2: usb_probe_device
[ 10.461358] usb usb2: configuration #1 chosen from 1 choice
[ 10.461363] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 10.461372] usb 2-0:1.0: uevent
[ 10.461389] hub 2-0:1.0: usb_probe_interface
[ 10.461390] hub 2-0:1.0: usb_probe_interface - got id
[ 10.461391] hub 2-0:1.0: USB hub found
[ 10.461396] hub 2-0:1.0: 6 ports detected
[ 10.461397] hub 2-0:1.0: standalone hub
[ 10.461398] hub 2-0:1.0: no power switching (usb 1.0)
[ 10.461399] hub 2-0:1.0: individual port over-current protection
[ 10.461400] hub 2-0:1.0: power on to power good time: 20ms
[ 10.461402] hub 2-0:1.0: local power source is good
[ 10.461403] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 10.482889] Linux video capture interface: v2.00
[ 10.494771] bttv: driver version 0.9.18 loaded
[ 10.494773] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 10.494836] bttv: Bt8xx card found (0).
[ 10.494844] alloc irq_desc for 21 on node -1
[ 10.494846] alloc kstat_irqs on node -1
[ 10.494850] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 10.494860] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 128,
mmio: 0xfcfff000
[ 10.494900] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra
TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option]
[ 10.494903] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 10.494937] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 10.551270] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001803 POWER
sig=j CSC CONNECT
[ 10.551272] hub 1-0:1.0: port 2: status 0501 change 0001
[ 10.561275] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 10.651263] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000
[ 10.651272] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 10.703779] ehci_hcd 0000:00:12.2: port 2 high speed
[ 10.703783] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 10.757102] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 10.810459] ehci_hcd 0000:00:12.2: port 2 high speed
[ 10.810462] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 10.881956] usb 1-2: default language 0x0409
[ 10.882205] usb 1-2: udev 2, busnum 1, minor = 1
[ 10.882206] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 10.882207] usb 1-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 10.882209] usb 1-2: Product: USB2.0 Hub
[ 10.882246] usb 1-2: uevent
[ 10.882256] usb 1-2: usb_probe_device
[ 10.882258] usb 1-2: configuration #1 chosen from 1 choice
[ 10.882682] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
[ 10.882694] usb 1-2:1.0: uevent
[ 10.882702] hub 1-2:1.0: usb_probe_interface
[ 10.882703] hub 1-2:1.0: usb_probe_interface - got id
[ 10.882707] hub 1-2:1.0: USB hub found
[ 10.882955] hub 1-2:1.0: 4 ports detected
[ 10.882956] hub 1-2:1.0: standalone hub
[ 10.882957] hub 1-2:1.0: individual port power switching
[ 10.882958] hub 1-2:1.0: individual port over-current protection
[ 10.882960] hub 1-2:1.0: Single TT
[ 10.882961] hub 1-2:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 10.882962] hub 1-2:1.0: Port indicators are supported
[ 10.882963] hub 1-2:1.0: power on to power good time: 100ms
[ 10.883330] hub 1-2:1.0: local power source is good
[ 10.883332] hub 1-2:1.0: enabling power on all ports
[ 10.985086] hub 1-2:1.0: port 2: status 0301 change 0001
[ 11.084589] usb 1-2: link qh256-0001/ffff8800c7800180 start 1 [1/0 us]
[ 11.084596] hub 1-2:1.0: state 7 ports 4 chg 0004 evt 0000
[ 11.084835] hub 1-2:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[ 11.151839] usb 1-2.2: new low speed USB device using ehci_hcd and address
3
[ 11.238593] usb 1-2.2: skipped 1 descriptor after interface
[ 11.238595] usb 1-2.2: skipped 1 descriptor after interface
[ 11.239091] usb 1-2.2: default language 0x0409
[ 11.241347] usb 1-2.2: udev 3, busnum 1, minor = 2
[ 11.241348] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518
[ 11.241350] usb 1-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 11.241351] usb 1-2.2: Product: USB Receiver
[ 11.241352] usb 1-2.2: Manufacturer: Logitech
[ 11.241374] usb 1-2.2: uevent
[ 11.241385] usb 1-2.2: usb_probe_device
[ 11.241386] usb 1-2.2: configuration #1 chosen from 1 choice
[ 11.248723] usb 1-2.2: adding 1-2.2:1.0 (config #1, interface 0)
[ 11.248732] usb 1-2.2:1.0: uevent
[ 11.248744] usbhid 1-2.2:1.0: usb_probe_interface
[ 11.248745] usbhid 1-2.2:1.0: usb_probe_interface - got id
[ 11.249081] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42
[ 11.251955] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input3
[ 11.251996] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input0
[ 11.252005] usb 1-2.2: adding 1-2.2:1.1 (config #1, interface 1)
[ 11.252017] usb 1-2.2:1.1: uevent
[ 11.252024] usbhid 1-2.2:1.1: usb_probe_interface
[ 11.252025] usbhid 1-2.2:1.1: usb_probe_interface - got id
[ 11.252330] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42
[ 11.257642] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input4
[ 11.257649] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 11.257662] drivers/usb/core/file.c: looking for a minor, starting at 96
[ 11.257689] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input1
[ 11.257703] hub 1-2:1.0: state 7 ports 4 chg 0000 evt 0004
[ 11.280255] usb 1-2.2:1.0: uevent
[ 11.280300] usb 1-2.2: uevent
[ 11.280684] usb 1-2.2:1.0: uevent
[ 11.280733] usb 1-2.2: uevent
[ 11.280756] usb 1-2.2:1.1: uevent
[ 11.280808] usb 1-2.2: uevent
[ 11.281305] usb 1-2.2:1.0: uevent
[ 11.281513] usb 1-2.2:1.1: uevent
[ 11.289425] usb 1-2.2:1.0: uevent
[ 11.500033] bttv0: tea5757: read timeout
[ 11.500035] bttv0: tuner type=5
[ 11.514539] bttv0: audio absent, no audio device found!
[ 11.524867] TUNER: Unable to find symbol tea5767_autodetection()
[ 11.524870] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw])
[ 11.527659] tuner-simple 0-0060: creating new instance
[ 11.527661] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and
compatibles))
[ 11.528497] bttv0: registered device video0
[ 11.528526] bttv0: registered device vbi0
[ 11.821758] reiser4: md2: found disk format 4.0.0.
[ 13.632790] reiser4: md3: found disk format 4.0.0.
[ 54.809101] reiser4: sdc7: found disk format 4.0.0.
[ 67.201688] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1
across:7815612k
[ 67.258049] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1
across:7815612k
[ 67.279757] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1
across:7815612k
[ 67.977357] w83627ehf: Found W83627EHG chip at 0x290
[ 68.245636] r8169: eth0: link up
[ 68.245642] r8169: eth0: link up
[ 70.125283] usb usb1: uevent
[ 70.125385] usb 1-0:1.0: uevent
[ 70.125475] usb 1-2: uevent
[ 70.125577] usb 1-2.2: uevent
[ 70.125676] usb 1-2.2:1.0: uevent
[ 70.126369] usb 1-2.2:1.1: uevent
[ 70.127069] usb 1-2:1.0: uevent
[ 70.127444] usb usb2: uevent
[ 70.127542] usb 2-0:1.0: uevent
[ 71.264971] alloc irq_desc for 23 on node -1
[ 71.264978] alloc kstat_irqs on node -1
[ 71.264992] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) -
> IRQ 23
[ 71.271929] Audigy2 value: Special config.
[ 72.531061] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[ 72.531064] Disabling lock debugging due to kernel taint
[ 72.543985] [fglrx] Maximum main memory to use for locked dma buffers: 7760
MBytes.
[ 72.544061] [fglrx] vendor: 1002 device: 9501 count: 1
[ 72.544241] [fglrx] ioport: bar 4, base 0xc000, size: 0x100
[ 72.544251] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 72.544255] pci 0000:02:00.0: setting latency timer to 64
[ 72.544384] [fglrx] Kernel PAT support is enabled
[ 72.544400] [fglrx] module loaded - fglrx 8.66.2 [Sep 1 2009] with 1
minors
[ 72.710232] alloc irq_desc for 29 on node -1
[ 72.710234] alloc kstat_irqs on node -1
[ 72.710243] fglrx_pci 0000:02:00.0: irq 29 for MSI/MSI-X
[ 72.710562] [fglrx] Firegl kernel thread PID: 3837
[ 74.814846] [fglrx] Gart USWC size:1279 M.
[ 74.814849] [fglrx] Gart cacheable size:508 M.
[ 74.814852] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 74.814854] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000
[ 74.814855] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[ 75.970462] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 124.835074] reiser4[bogofilter(4037)]: disable_write_barrier
(fs/reiser4/wander.c:235)[zam-1055]:
[ 124.835078] NOTICE: md3 does not support write barriers, using synchronous
write instead.
[ 239.027922] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 239.027929] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 239.027931] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 239.027933] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 239.028376] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 239.028378] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 474.084572] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 474.084588] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 474.084597] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 474.084605] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 474.085157] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 474.085167] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 616.832491] reiser4[ktxnmgrd:md1:ru(580)]: disable_write_barrier
(fs/reiser4/wander.c:235)[zam-1055]:
[ 616.832495] NOTICE: md1 does not support write barriers, using synchronous
write instead.
[ 672.235774] reiser4[qmgr(3700)]: disable_write_barrier
(fs/reiser4/wander.c:235)[zam-1055]:
[ 672.235776] NOTICE: md2 does not support write barriers, using synchronous
write instead.
[ 908.564515] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.564522] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.564524] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.564527] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.564926] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.564928] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.624512] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.624519] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.624521] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.624524] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.625050] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.625052] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.634518] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.634525] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.634527] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.634529] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.635802] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.635805] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.694512] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.694519] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.694521] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.694523] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.695301] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.695303] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.754510] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.754517] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.754519] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.754522] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.755562] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.755565] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.814504] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.814509] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.814511] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.814513] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.815314] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.815317] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.874511] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.874520] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.874522] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.874525] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.875566] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.875570] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.934521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.934534] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.934541] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.934548] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.935316] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.935323] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.994519] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.994532] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.994538] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.994545] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 908.995587] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 908.995595] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.054532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.054546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.054552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.054559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.055319] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.055326] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.114525] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.114540] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.114547] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.114555] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.115588] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.115596] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.174526] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.174540] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.174547] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.174555] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.175332] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.175339] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.234519] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.234532] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.234539] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.234547] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.235588] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.235597] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.394522] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.394537] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.394544] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.394552] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.395073] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.395079] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.454523] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.454538] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.454544] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.454551] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.455336] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.455343] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.514535] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.514550] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.514557] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.514565] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.515596] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.515605] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.574523] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.574537] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.574543] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.574550] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.575353] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.575360] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.634526] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.634541] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.634548] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.634556] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.635581] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.635589] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.694524] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.694539] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.694546] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.694554] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.695328] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.695335] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.754535] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.754551] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.754558] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.754566] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.755597] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.755605] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.914524] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.914539] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.914546] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.914554] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.915079] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.915086] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.974523] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.974537] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.974543] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.974551] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 909.975352] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 909.975359] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.034521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.034534] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.034541] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.034548] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.035599] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.035608] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.094537] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.094552] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.094559] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.094566] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.095353] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.095361] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.154521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.154535] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.154542] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.154549] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.155600] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.155609] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.214522] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.214536] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.214542] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.214549] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.215342] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.215350] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.274519] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.274532] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.274538] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.274546] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.275602] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.275610] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.334526] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.334541] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.334548] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.334556] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.335363] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.335370] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.394521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.394535] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.394542] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.394549] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.395603] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.395612] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.454521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.454534] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.454540] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.454547] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.455348] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.455357] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.514529] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.514542] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.514548] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.514556] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.515604] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.515612] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.574527] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.574542] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.574549] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.574557] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.575355] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.575362] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.634522] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.634536] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.634542] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.634550] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.635606] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.635615] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.694527] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.694543] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.694549] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.694557] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.695352] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.695359] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.754522] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.754537] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.754543] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.754551] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.755961] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.755969] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.814529] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.814544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.814551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.814559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.815363] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.815370] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.874522] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.874536] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.874542] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.874550] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.875593] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.875601] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.934526] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.934542] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.934548] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.934556] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.935353] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.935360] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.994521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.994535] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.994541] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.994548] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 910.995610] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 910.995618] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.054521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.054534] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.054540] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.054547] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.055340] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.055347] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.114525] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.114540] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.114547] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.114555] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.115614] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.115622] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.174520] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.174533] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.174539] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.174546] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.175343] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.175350] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.234517] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.234531] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.234537] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.234544] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.235613] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.235621] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.294520] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.294533] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.294539] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.294546] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.295345] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.295352] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.354536] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.354552] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.354559] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.354567] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.355617] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.355625] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.414522] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.414535] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.414541] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.414549] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.415358] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.415366] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.474519] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.474531] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.474537] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.474545] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.475616] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.475624] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.534520] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.534533] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.534539] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.534547] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.535366] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.535374] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.594534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.594549] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.594555] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.594562] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.595620] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.595629] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.654525] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.654539] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.654545] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.654552] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.655371] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.655379] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.714534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.714548] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.714554] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.714562] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.715623] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.715631] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.774533] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.774546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.774552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.774560] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.775372] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.775381] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.834534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.834548] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.834554] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.834562] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.835623] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.835632] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.894532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.894546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.894552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.894560] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.895374] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.895382] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.954534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.954549] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.954555] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.954562] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 911.955625] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 911.955634] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.014534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.014548] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.014554] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.014562] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.015375] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.015384] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.074531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.074544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.074550] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.074557] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.075626] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.075634] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.134537] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.134551] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.134557] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.134565] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.135378] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.135386] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.194531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.194545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.194551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.194558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.195627] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.195636] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.254533] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.254546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.254552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.254560] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.255378] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.255387] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.314531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.314545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.314551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.314558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.315629] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.315638] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.374536] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.374550] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.374556] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.374564] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.375381] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.375389] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.434531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.434545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.434551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.434558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.435630] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.435639] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.494532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.494546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.494552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.494560] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.495381] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.495389] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.554531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.554544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.554550] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.554558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.555632] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.555640] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.614538] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.614553] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.614559] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.614566] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.615384] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.615393] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.674531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.674544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.674550] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.674557] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.675633] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.675642] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.734536] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.734551] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.734557] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.734565] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.735385] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.735394] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.794531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.794544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.794550] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.794558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.795635] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.795643] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.854536] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.854551] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.854557] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.854564] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.855387] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.855396] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.914531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.914544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.914550] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.914558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.915636] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.915645] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.974541] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.974555] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.974561] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.974569] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 912.975388] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 912.975397] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.034531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.034544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.034550] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.034558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.035651] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.035660] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.094533] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.094547] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.094553] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.094560] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.095388] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.095397] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.154536] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.154551] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.154557] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.154565] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.155641] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.155649] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.214534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.214548] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.214554] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.214561] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.215390] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.215399] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.274531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.274545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.274551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.274558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.275641] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.275649] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.334532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.334546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.334552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.334559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.335384] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.335392] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.394535] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.394549] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.394555] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.394563] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.395643] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.395652] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.454532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.454546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.454552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.454559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.455393] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.455402] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.514531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.514545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.514551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.514558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.515643] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.515652] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.574532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.574546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.574552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.574559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.575395] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.575404] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.634539] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.634554] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.634560] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.634567] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.635646] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.635655] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.694532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.694546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.694552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.694559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.695397] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.695406] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.754534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.754549] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.754555] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.754562] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 913.755648] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 913.755656] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 922.914535] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 922.914551] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 922.914560] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 922.914568] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 922.914984] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 922.914991] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 922.974536] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 922.974552] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 922.974558] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 922.974566] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 922.975510] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 922.975520] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.034531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.034545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.034551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.034559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.034984] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.034990] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.094537] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.094552] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.094558] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.094566] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.095513] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.095522] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.154531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.154545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.154551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.154559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.154986] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.154992] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.214539] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.214554] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.214560] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.214568] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.215514] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.215523] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.274531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.274545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.274551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.274558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.274987] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.274993] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.334532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.334546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.334552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.334559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.335514] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.335523] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.394530] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.394544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.394550] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.394558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.394989] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.394995] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.454537] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.454552] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.454559] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.454566] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.455508] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.455517] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.514531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.514545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.514551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.514558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.514990] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.514996] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.574532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.574546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.574552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.574559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.575516] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.575525] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.634521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.634535] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.634541] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.634549] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.634999] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.635006] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.694533] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.694548] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.694554] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.694562] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.695515] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.695524] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.754529] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.754542] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.754548] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.754556] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.754992] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.754998] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.814532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.814545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.814551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.814559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.815516] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.815524] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.874534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.874550] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.874556] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.874564] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 923.874996] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule
[ 923.875002] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 950.466763] ehci_hcd 0000:00:13.2: remove, state 1
[ 950.466769] ehci_hcd 0000:00:13.2: roothub graceful disconnect
[ 950.466782] usb usb2: USB disconnect, address 1
[ 950.466786] usb usb2: unregistering device
[ 950.466791] usb usb2: usb_disable_device nuking all URBs
[ 950.466801] ehci_hcd 0000:00:13.2: shutdown urb ffff8802349393c0 ep1in-intr
[ 950.466807] usb usb2: unregistering interface 2-0:1.0
[ 950.466903] usb 2-0:1.0: uevent
[ 950.473459] usb usb2: uevent
[ 950.473496] ehci_hcd 0000:00:13.2: stop
[ 950.474367] ehci_hcd 0000:00:13.2: reset command 01000a (park)=0 ithresh=1
period=256 Reset HALT
[ 950.474401] ehci_hcd 0000:00:13.2: irq normal 0 err 0 reclaim 0 (lost 0)
[ 950.474406] ehci_hcd 0000:00:13.2: complete 0 unlink 0
[ 950.474415] ehci_hcd 0000:00:13.2: ehci_stop completed status 1000 Halt
[ 950.474428] ehci_hcd 0000:00:13.2: USB bus 2 deregistered
[ 950.474636] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 950.475124] ehci_hcd 0000:00:12.2: remove, state 1
[ 950.475129] ehci_hcd 0000:00:12.2: roothub graceful disconnect
[ 950.475141] usb usb1: USB disconnect, address 1
[ 950.475146] usb 1-2: USB disconnect, address 2
[ 950.475151] usb 1-2.2: USB disconnect, address 3
[ 950.475155] usb 1-2.2: unregistering device
[ 950.475160] usb 1-2.2: usb_disable_device nuking all URBs
[ 950.475174] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us]
[ 950.475188] ehci_hcd 0000:00:12.2: shutdown urb ffff880235a04c00 ep1in-intr
[ 950.475197] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us]
[ 950.475207] ehci_hcd 0000:00:12.2: shutdown urb ffff88023706e240 ep2in-intr
[ 950.475214] usb 1-2.2: unregistering interface 1-2.2:1.0
[ 950.493804] usb 1-2.2:1.0: uevent
[ 950.493908] usb 1-2.2: unregistering interface 1-2.2:1.1
[ 950.527053] drivers/usb/core/file.c: removing 96 minor
[ 950.528459] usb 1-2.2:1.1: uevent
[ 950.528792] usb 1-2.2: uevent
[ 950.529311] usb 1-2: unregistering device
[ 950.529318] usb 1-2: usb_disable_device nuking all URBs
[ 950.529332] usb 1-2: unlink qh256-0001/ffff8800c7800180 start 1 [1/0 us]
[ 950.529403] ehci_hcd 0000:00:12.2: shutdown urb ffff880233cfa6c0 ep1in-intr
[ 950.530699] usb 1-2: unregistering interface 1-2:1.0
[ 950.530803] usb 1-2:1.0: uevent
[ 950.531187] usb 1-2: uevent
[ 950.531616] usb usb1: unregistering device
[ 950.531622] usb usb1: usb_disable_device nuking all URBs
[ 950.531632] ehci_hcd 0000:00:12.2: shutdown urb ffff880234822840 ep1in-intr
[ 950.531638] usb usb1: unregistering interface 1-0:1.0
[ 950.531719] usb 1-0:1.0: uevent
[ 950.532034] usb usb1: uevent
[ 950.532436] ehci_hcd 0000:00:12.2: stop
[ 950.532810] ehci_hcd 0000:00:12.2: reset command 01000a (park)=0 ithresh=1
period=256 Reset HALT
[ 950.532847] ehci_hcd 0000:00:12.2: irq normal 10184 err 2 reclaim 118 (lost
0)
[ 950.532853] ehci_hcd 0000:00:12.2: complete 10290 unlink 3
[ 950.532861] ehci_hcd 0000:00:12.2: ehci_stop completed status 1000 Halt
[ 950.532874] ehci_hcd 0000:00:12.2: USB bus 1 deregistered
[ 950.533341] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 960.865917] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 960.865926] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
[ 960.865983] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 960.866052] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 960.866238] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 960.866254] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2
pcc=3 ordered !ppc ports=6
[ 960.866263] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes
256/512/1024
[ 960.866305] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze
workaround
[ 960.866320] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 960.866341] ehci_hcd 0000:00:12.2: debug port 1
[ 960.866348] ehci_hcd 0000:00:12.2: MWI active
[ 960.866352] ehci_hcd 0000:00:12.2: supports USB remote wakeup
[ 960.866372] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 960.866381] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 960.866393] ehci_hcd 0000:00:12.2: init command 010009 (park)=0 ithresh=1
period=256 RUN
[ 960.873687] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 960.873741] usb usb1: default language 0x0409
[ 960.873755] usb usb1: udev 1, busnum 1, minor = 0
[ 960.873760] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 960.873766] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 960.873771] usb usb1: Product: EHCI Host Controller
[ 960.873775] usb usb1: Manufacturer: Linux 2.6.31r4 ehci_hcd
[ 960.873779] usb usb1: SerialNumber: 0000:00:12.2
[ 960.873866] usb usb1: uevent
[ 960.873994] usb usb1: usb_probe_device
[ 960.874001] usb usb1: configuration #1 chosen from 1 choice
[ 960.874017] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 960.874053] usb 1-0:1.0: uevent
[ 960.874124] hub 1-0:1.0: usb_probe_interface
[ 960.874129] hub 1-0:1.0: usb_probe_interface - got id
[ 960.874133] hub 1-0:1.0: USB hub found
[ 960.874148] hub 1-0:1.0: 6 ports detected
[ 960.874152] hub 1-0:1.0: standalone hub
[ 960.874155] hub 1-0:1.0: no power switching (usb 1.0)
[ 960.874159] hub 1-0:1.0: individual port over-current protection
[ 960.874164] hub 1-0:1.0: power on to power good time: 20ms
[ 960.874173] hub 1-0:1.0: local power source is good
[ 960.874178] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 960.874278] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 960.874315] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 960.874445] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 960.874459] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2
pcc=3 ordered !ppc ports=6
[ 960.874468] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes
256/512/1024
[ 960.874501] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze
workaround
[ 960.874515] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 960.874536] ehci_hcd 0000:00:13.2: debug port 1
[ 960.874544] ehci_hcd 0000:00:13.2: MWI active
[ 960.874548] ehci_hcd 0000:00:13.2: supports USB remote wakeup
[ 960.874566] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 960.874575] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 960.874587] ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1
period=256 RUN
[ 960.883687] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 960.883736] usb usb2: default language 0x0409
[ 960.883749] usb usb2: udev 1, busnum 2, minor = 128
[ 960.883754] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 960.883759] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 960.883764] usb usb2: Product: EHCI Host Controller
[ 960.883768] usb usb2: Manufacturer: Linux 2.6.31r4 ehci_hcd
[ 960.883772] usb usb2: SerialNumber: 0000:00:13.2
[ 960.883852] usb usb2: uevent
[ 960.883976] usb usb2: usb_probe_device
[ 960.883982] usb usb2: configuration #1 chosen from 1 choice
[ 960.883995] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 960.884029] usb 2-0:1.0: uevent
[ 960.884114] hub 2-0:1.0: usb_probe_interface
[ 960.884118] hub 2-0:1.0: usb_probe_interface - got id
[ 960.884122] hub 2-0:1.0: USB hub found
[ 960.884136] hub 2-0:1.0: 6 ports detected
[ 960.884140] hub 2-0:1.0: standalone hub
[ 960.884143] hub 2-0:1.0: no power switching (usb 1.0)
[ 960.884147] hub 2-0:1.0: individual port over-current protection
[ 960.884152] hub 2-0:1.0: power on to power good time: 20ms
[ 960.884160] hub 2-0:1.0: local power source is good
[ 960.884165] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 960.973704] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001803 POWER
sig=j CSC CONNECT
[ 960.973713] hub 1-0:1.0: port 2: status 0501 change 0001
[ 960.983729] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 961.073705] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000
[ 961.073725] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 961.127893] ehci_hcd 0000:00:12.2: port 2 high speed
[ 961.127905] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 961.181195] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 961.234546] ehci_hcd 0000:00:12.2: port 2 high speed
[ 961.234557] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 961.306035] usb 1-2: default language 0x0409
[ 961.306410] usb 1-2: udev 2, busnum 1, minor = 1
[ 961.306415] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 961.306420] usb 1-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 961.306426] usb 1-2: Product: USB2.0 Hub
[ 961.306529] usb 1-2: uevent
[ 961.306558] usb 1-2: usb_probe_device
[ 961.306565] usb 1-2: configuration #1 chosen from 1 choice
[ 961.308320] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
[ 961.308363] usb 1-2:1.0: uevent
[ 961.308390] hub 1-2:1.0: usb_probe_interface
[ 961.308394] hub 1-2:1.0: usb_probe_interface - got id
[ 961.308398] hub 1-2:1.0: USB hub found
[ 961.308919] hub 1-2:1.0: 4 ports detected
[ 961.308923] hub 1-2:1.0: standalone hub
[ 961.308927] hub 1-2:1.0: individual port power switching
[ 961.308931] hub 1-2:1.0: individual port over-current protection
[ 961.308935] hub 1-2:1.0: Single TT
[ 961.308940] hub 1-2:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 961.308944] hub 1-2:1.0: Port indicators are supported
[ 961.308948] hub 1-2:1.0: power on to power good time: 100ms
[ 961.309409] hub 1-2:1.0: local power source is good
[ 961.309414] hub 1-2:1.0: enabling power on all ports
[ 961.411788] hub 1-2:1.0: port 2: status 0301 change 0001
[ 961.511193] usb 1-2: link qh256-0001/ffff8800c7592180 start 1 [1/0 us]
[ 961.511213] hub 1-2:1.0: state 7 ports 4 chg 0004 evt 0000
[ 961.511547] hub 1-2:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[ 961.578584] usb 1-2.2: new low speed USB device using ehci_hcd and address
3
[ 961.665692] usb 1-2.2: skipped 1 descriptor after interface
[ 961.665700] usb 1-2.2: skipped 1 descriptor after interface
[ 961.666184] usb 1-2.2: default language 0x0409
[ 961.668423] usb 1-2.2: udev 3, busnum 1, minor = 2
[ 961.668429] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518
[ 961.668435] usb 1-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 961.668440] usb 1-2.2: Product: USB Receiver
[ 961.668444] usb 1-2.2: Manufacturer: Logitech
[ 961.668552] usb 1-2.2: uevent
[ 961.668578] usb 1-2.2: usb_probe_device
[ 961.668584] usb 1-2.2: configuration #1 chosen from 1 choice
[ 961.675815] usb 1-2.2: adding 1-2.2:1.0 (config #1, interface 0)
[ 961.675868] usb 1-2.2:1.0: uevent
[ 961.675901] usbhid 1-2.2:1.0: usb_probe_interface
[ 961.675905] usbhid 1-2.2:1.0: usb_probe_interface - got id
[ 961.676286] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42
[ 961.680639] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input5
[ 961.680779] generic-usb 0003:046D:C518.0003: input,hidraw0: USB HID v1.11
Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input0
[ 961.680814] usb 1-2.2: adding 1-2.2:1.1 (config #1, interface 1)
[ 961.680846] usb 1-2.2:1.1: uevent
[ 961.680871] usbhid 1-2.2:1.1: usb_probe_interface
[ 961.680875] usbhid 1-2.2:1.1: usb_probe_interface - got id
[ 961.681662] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42
[ 961.688374] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input6
[ 961.688398] usb 1-2.2: link qh8-0601/ffff8800c7592300 start 2 [1/2 us]
[ 961.688454] drivers/usb/core/file.c: looking for a minor, starting at 96
[ 961.688561] generic-usb 0003:046D:C518.0004: input,hiddev96,hidraw1: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input1
[ 961.688623] hub 1-2:1.0: state 7 ports 4 chg 0000 evt 0004
[ 961.696088] usb 1-2.2:1.0: uevent
[ 961.696263] usb 1-2.2: uevent
[ 961.696624] usb 1-2.2:1.0: uevent
[ 961.696805] usb 1-2.2: uevent
[ 961.698587] usb 1-2.2:1.0: uevent
[ 961.699721] usb 1-2.2:1.0: uevent
[ 961.699845] usb 1-2.2:1.1: uevent
[ 961.700005] usb 1-2.2: uevent
[ 961.705651] usb 1-2.2:1.1: uevent
[ 961.724537] usb 1-2.2: link qh8-0601/ffff8800c75923c0 start 3 [1/2 us]


Gl?ck Auf,
Volker

2009-09-16 12:25:24

by Volker Armin Hemmann

[permalink] [raw]
Subject: Re: 2.6.31 ehci problem - mouse dead on scroll

On Mittwoch 16 September 2009, Oliver Neukum wrote:
> Am Mittwoch, 16. September 2009 13:56:26 schrieb Volker Armin Hemmann:
> > ok, I am done. Was back earlier then expected and had an
> > all-awake-night, so lots of time:
>
> Thank you very much for the great testing.
>
> > with
> > USB selective suspend/resume and wakeup on
> >
> > Root Hub Transaction Translators on
> > Improved Transaction Translator scheduling off
> >
> > mouse is fine
> >
> >
> > with
> > USB selective suspend/resume and wakeup on
> >
> > Root Hub Transaction Translators off
> > Improved Transaction Translator scheduling on
> >
> > mouse is fine
>
> So this is an EHCI root hub problem most likely.
> This means we need to include Alan, master of ehci.
>
> He'll need additional debugging info. Do you know how to get
> at the ehci registers through debugfs?
> Furthermore, if you have a hub can you try to attach your mouse
> through a hub?
>
> Regards
> Oliver
>


emm, the mouse is attached through a powered 4port usb 2.0 hub. That is the
only way to get it working. If I attach it directly (without loading ohci) it
does not work (well, only tried with both Transaction Translator options off),
and if I load ohci before I connect it, it is very very jerky. So jerky in
fact, that I considered douzends of lockups a day a better alternative.

debugfs is mounted (and usbmon too.):

cat /sys/kernel/debug/usb/ehci/0000:00:12.2/registers
bus pci, device 0000:00:12.2
EHCI Host Controller
EHCI 1.00, hcd state 1
ownership 00000001
SMI sts/enable 0xc0080000
structural params 0x00102306
capability params 0x0000a072
status 4008 Periodic FLR
command 010019 (park)=0 ithresh=1 Periodic period=256 RUN
intrenable 37 IAA FATAL PCD ERR INT
uframe 232f
port 1 status 001000 POWER sig=se0
port 2 status 001005 POWER sig=se0 PE CONNECT
port 3 status 001000 POWER sig=se0
port 4 status 001000 POWER sig=se0
port 5 status 001000 POWER sig=se0
port 6 status 001000 POWER sig=se0
irq normal 20356 err 2 reclaim 16 (lost 0)
complete 20359 unlink 0

cat /sys/kernel/debug/usb/ehci/0000:00:13.2/registers
bus pci, device 0000:00:13.2
EHCI Host Controller
EHCI 1.00, hcd state 1
ownership 00000001
SMI sts/enable 0xc0080000
structural params 0x00102306
capability params 0x0000a072
status 0008 FLR
command 010009 (park)=0 ithresh=1 period=256 RUN
intrenable 37 IAA FATAL PCD ERR INT
uframe 3a34
port 1 status 001000 POWER sig=se0
port 2 status 001000 POWER sig=se0
port 3 status 001000 POWER sig=se0
port 4 status 001000 POWER sig=se0
port 5 status 001000 POWER sig=se0
port 6 status 001000 POWER sig=se0
irq normal 0 err 0 reclaim 0 (lost 0)
complete 0 unlink 0

this is with 'all off', translators off selective resume off.


Gl?ck Auf,
Volker

2009-09-16 13:44:03

by Alan Stern

[permalink] [raw]
Subject: Re: 2.6.31 ehci problem - mouse dead on scroll

On Wed, 16 Sep 2009, Volker Armin Hemmann wrote:

> emm, the mouse is attached through a powered 4port usb 2.0 hub. That is the
> only way to get it working. If I attach it directly (without loading ohci) it
> does not work (well, only tried with both Transaction Translator options off),
> and if I load ohci before I connect it, it is very very jerky. So jerky in
> fact, that I considered douzends of lockups a day a better alternative.

That is a separate issue and it is a serious bug. If anything, the
behavior with OHCI should be better than with EHCI. This is worth
pursuing farther. A usbmon log combined with the dmesg log would help.
There's no need to include all the boot-up messages in the dmesg log;
you can clear the log buffer before plugging in the mouse.

In fact, we can probably forget about the EHCI issue. If it works okay
with the newer TT scheduler, that should be good enough.

Alan Stern

2009-09-16 15:03:26

by Volker Armin Hemmann

[permalink] [raw]
Subject: Re: 2.6.31 ehci problem - mouse dead on scroll

On Mittwoch 16 September 2009, you wrote:
> On Wed, 16 Sep 2009, Volker Armin Hemmann wrote:
> > emm, the mouse is attached through a powered 4port usb 2.0 hub. That is
> > the only way to get it working. If I attach it directly (without loading
> > ohci) it does not work (well, only tried with both Transaction Translator
> > options off), and if I load ohci before I connect it, it is very very
> > jerky. So jerky in fact, that I considered douzends of lockups a day a
> > better alternative.
>
> That is a separate issue and it is a serious bug. If anything, the
> behavior with OHCI should be better than with EHCI. This is worth
> pursuing farther. A usbmon log combined with the dmesg log would help.
> There's no need to include all the boot-up messages in the dmesg log;
> you can clear the log buffer before plugging in the mouse.
>
> In fact, we can probably forget about the EHCI issue. If it works okay
> with the newer TT scheduler, that should be good enough.
>
> Alan Stern
>


I removed the mouse, cleared dmesg, loaded ohci_ inserted mouse in one of the
ports, moved it, lots of jerks. It was good for a couple of seconds, then it
hangs&is jerky, than was ok for a while.
Sometimes it is good for several minutes before becoming jerky - and there is
nothing I know of to make it appear. It just happens and goes away. Randomly
it seems.

[ 4641.872236] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4641.872244] ohci_hcd: block sizes: ed 80 td 96
[ 4641.872295] alloc irq_desc for 16 on node -1
[ 4641.872300] alloc kstat_irqs on node -1
[ 4641.872313] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 4641.873309] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 4641.873523] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus
number 3
[ 4641.873550] ohci_hcd 0000:00:12.0: enabled AMD ISO transfers quirk
[ 4641.873576] ohci_hcd 0000:00:12.0: created debug files
[ 4641.873581] ohci_hcd 0000:00:12.0: supports USB remote wakeup
[ 4641.873612] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfddfe000
[ 4641.931511] ohci_hcd 0000:00:12.0: OHCI controller state
[ 4641.931523] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers
[ 4641.931533] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational
CBSR=3
[ 4641.931540] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
[ 4641.931548] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
[ 4641.931555] ohci_hcd 0000:00:12.0: intrenable 0x8000001a MIE UE RD WDH
[ 4641.931567] ohci_hcd 0000:00:12.0: hcca frame #0005
[ 4641.931575] ohci_hcd 0000:00:12.0: roothub.a 02001203 POTPGT=2 NOCP NPS
NDP=3(3)
[ 4641.931582] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 4641.931589] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
[ 4641.931597] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
[ 4641.931604] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
[ 4641.931611] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
[ 4641.931639] usb usb3: default language 0x0409
[ 4641.931653] usb usb3: udev 1, busnum 3, minor = 256
[ 4641.931658] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4641.931663] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4641.931668] usb usb3: Product: OHCI Host Controller
[ 4641.931672] usb usb3: Manufacturer: Linux 2.6.31r4 ohci_hcd
[ 4641.931676] usb usb3: SerialNumber: 0000:00:12.0
[ 4641.931795] usb usb3: uevent
[ 4641.931944] usb usb3: usb_probe_device
[ 4641.931950] usb usb3: configuration #1 chosen from 1 choice
[ 4641.931967] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 4641.932002] usb 3-0:1.0: uevent
[ 4641.932076] hub 3-0:1.0: usb_probe_interface
[ 4641.932081] hub 3-0:1.0: usb_probe_interface - got id
[ 4641.932087] hub 3-0:1.0: USB hub found
[ 4641.932105] hub 3-0:1.0: 3 ports detected
[ 4641.932109] hub 3-0:1.0: standalone hub
[ 4641.932113] hub 3-0:1.0: no power switching (usb 1.0)
[ 4641.932118] hub 3-0:1.0: no over-current protection
[ 4641.932122] hub 3-0:1.0: power on to power good time: 4ms
[ 4641.932133] hub 3-0:1.0: local power source is good
[ 4641.932138] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 4641.932239] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 4641.932290] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 4641.932428] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus
number 4
[ 4641.932451] ohci_hcd 0000:00:12.1: enabled AMD ISO transfers quirk
[ 4641.932476] ohci_hcd 0000:00:12.1: created debug files
[ 4641.932482] ohci_hcd 0000:00:12.1: supports USB remote wakeup
[ 4641.932497] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfddfd000
[ 4641.988180] ohci_hcd 0000:00:12.1: OHCI controller state
[ 4641.988190] ohci_hcd 0000:00:12.1: OHCI 1.0, NO legacy support registers
[ 4641.988200] ohci_hcd 0000:00:12.1: control 0x283 RWC HCFS=operational
CBSR=3
[ 4641.988208] ohci_hcd 0000:00:12.1: cmdstatus 0x00000 SOC=0
[ 4641.988215] ohci_hcd 0000:00:12.1: intrstatus 0x00000004 SF
[ 4641.988223] ohci_hcd 0000:00:12.1: intrenable 0x8000001a MIE UE RD WDH
[ 4641.988235] ohci_hcd 0000:00:12.1: hcca frame #0005
[ 4641.988243] ohci_hcd 0000:00:12.1: roothub.a 02001203 POTPGT=2 NOCP NPS
NDP=3(3)
[ 4641.988250] ohci_hcd 0000:00:12.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 4641.988256] ohci_hcd 0000:00:12.1: roothub.status 00008000 DRWE
[ 4641.988264] ohci_hcd 0000:00:12.1: roothub.portstatus [0] 0x00000100 PPS
[ 4641.988271] ohci_hcd 0000:00:12.1: roothub.portstatus [1] 0x00000100 PPS
[ 4641.988278] ohci_hcd 0000:00:12.1: roothub.portstatus [2] 0x00000100 PPS
[ 4641.988304] usb usb4: default language 0x0409
[ 4641.988317] usb usb4: udev 1, busnum 4, minor = 384
[ 4641.988322] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4641.988327] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4641.988332] usb usb4: Product: OHCI Host Controller
[ 4641.988336] usb usb4: Manufacturer: Linux 2.6.31r4 ohci_hcd
[ 4641.988340] usb usb4: SerialNumber: 0000:00:12.1
[ 4641.988445] usb usb4: uevent
[ 4641.989624] usb usb4: usb_probe_device
[ 4641.989631] usb usb4: configuration #1 chosen from 1 choice
[ 4641.989648] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 4641.989685] usb 4-0:1.0: uevent
[ 4641.989770] hub 4-0:1.0: usb_probe_interface
[ 4641.989775] hub 4-0:1.0: usb_probe_interface - got id
[ 4641.989780] hub 4-0:1.0: USB hub found
[ 4641.989797] hub 4-0:1.0: 3 ports detected
[ 4641.989801] hub 4-0:1.0: standalone hub
[ 4641.989805] hub 4-0:1.0: no power switching (usb 1.0)
[ 4641.989809] hub 4-0:1.0: no over-current protection
[ 4641.989814] hub 4-0:1.0: power on to power good time: 4ms
[ 4641.989824] hub 4-0:1.0: local power source is good
[ 4641.989830] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 4641.989929] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[ 4641.989975] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4641.990115] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 5
[ 4641.990137] ohci_hcd 0000:00:13.0: enabled AMD ISO transfers quirk
[ 4641.990165] ohci_hcd 0000:00:13.0: created debug files
[ 4641.990170] ohci_hcd 0000:00:13.0: supports USB remote wakeup
[ 4641.990202] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfddfc000
[ 4642.030839] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4642.048175] ohci_hcd 0000:00:13.0: OHCI controller state
[ 4642.048184] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
[ 4642.048193] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational
CBSR=3
[ 4642.048200] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
[ 4642.048207] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
[ 4642.048214] ohci_hcd 0000:00:13.0: intrenable 0x8000001a MIE UE RD WDH
[ 4642.048227] ohci_hcd 0000:00:13.0: hcca frame #0005
[ 4642.048234] ohci_hcd 0000:00:13.0: roothub.a 02001203 POTPGT=2 NOCP NPS
NDP=3(3)
[ 4642.048241] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 4642.048247] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
[ 4642.048255] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
[ 4642.048262] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
[ 4642.048269] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
[ 4642.048293] usb usb5: default language 0x0409
[ 4642.048306] usb usb5: udev 1, busnum 5, minor = 512
[ 4642.048310] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4642.048315] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4642.048320] usb usb5: Product: OHCI Host Controller
[ 4642.048324] usb usb5: Manufacturer: Linux 2.6.31r4 ohci_hcd
[ 4642.048328] usb usb5: SerialNumber: 0000:00:13.0
[ 4642.048428] usb usb5: uevent
[ 4642.048551] usb usb5: usb_probe_device
[ 4642.048556] usb usb5: configuration #1 chosen from 1 choice
[ 4642.048571] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 4642.048605] usb 5-0:1.0: uevent
[ 4642.048674] hub 5-0:1.0: usb_probe_interface
[ 4642.048679] hub 5-0:1.0: usb_probe_interface - got id
[ 4642.048684] hub 5-0:1.0: USB hub found
[ 4642.048701] hub 5-0:1.0: 3 ports detected
[ 4642.048704] hub 5-0:1.0: standalone hub
[ 4642.048708] hub 5-0:1.0: no power switching (usb 1.0)
[ 4642.048712] hub 5-0:1.0: no over-current protection
[ 4642.048717] hub 5-0:1.0: power on to power good time: 4ms
[ 4642.048727] hub 5-0:1.0: local power source is good
[ 4642.048731] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 4642.048827] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[ 4642.048864] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4642.048997] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 6
[ 4642.049016] ohci_hcd 0000:00:13.1: enabled AMD ISO transfers quirk
[ 4642.049041] ohci_hcd 0000:00:13.1: created debug files
[ 4642.049046] ohci_hcd 0000:00:13.1: supports USB remote wakeup
[ 4642.049060] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfddf7000
[ 4642.090842] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4642.104844] ohci_hcd 0000:00:13.1: OHCI controller state
[ 4642.104853] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
[ 4642.104862] ohci_hcd 0000:00:13.1: control 0x283 RWC HCFS=operational
CBSR=3
[ 4642.104869] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
[ 4642.104876] ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
[ 4642.104883] ohci_hcd 0000:00:13.1: intrenable 0x8000001a MIE UE RD WDH
[ 4642.104895] ohci_hcd 0000:00:13.1: hcca frame #0005
[ 4642.104902] ohci_hcd 0000:00:13.1: roothub.a 02001203 POTPGT=2 NOCP NPS
NDP=3(3)
[ 4642.104909] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 4642.104915] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
[ 4642.104923] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
[ 4642.104930] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
[ 4642.104937] ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS
[ 4642.104960] usb usb6: default language 0x0409
[ 4642.104973] usb usb6: udev 1, busnum 6, minor = 640
[ 4642.104977] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4642.104982] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4642.104987] usb usb6: Product: OHCI Host Controller
[ 4642.104991] usb usb6: Manufacturer: Linux 2.6.31r4 ohci_hcd
[ 4642.104995] usb usb6: SerialNumber: 0000:00:13.1
[ 4642.105095] usb usb6: uevent
[ 4642.106222] usb usb6: usb_probe_device
[ 4642.106229] usb usb6: configuration #1 chosen from 1 choice
[ 4642.106245] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 4642.106278] usb 6-0:1.0: uevent
[ 4642.106361] hub 6-0:1.0: usb_probe_interface
[ 4642.106365] hub 6-0:1.0: usb_probe_interface - got id
[ 4642.106370] hub 6-0:1.0: USB hub found
[ 4642.106386] hub 6-0:1.0: 3 ports detected
[ 4642.106389] hub 6-0:1.0: standalone hub
[ 4642.106393] hub 6-0:1.0: no power switching (usb 1.0)
[ 4642.106397] hub 6-0:1.0: no over-current protection
[ 4642.106401] hub 6-0:1.0: power on to power good time: 4ms
[ 4642.106411] hub 6-0:1.0: local power source is good
[ 4642.106416] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 4642.106511] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 4642.106551] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 4642.106690] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus
number 7
[ 4642.106710] ohci_hcd 0000:00:14.5: enabled AMD ISO transfers quirk
[ 4642.106737] ohci_hcd 0000:00:14.5: created debug files
[ 4642.106741] ohci_hcd 0000:00:14.5: supports USB remote wakeup
[ 4642.106756] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfddf5000
[ 4642.147506] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4642.164847] ohci_hcd 0000:00:14.5: OHCI controller state
[ 4642.164856] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers
[ 4642.164865] ohci_hcd 0000:00:14.5: control 0x283 RWC HCFS=operational
CBSR=3
[ 4642.164872] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0
[ 4642.164879] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF
[ 4642.164886] ohci_hcd 0000:00:14.5: intrenable 0x8000001a MIE UE RD WDH
[ 4642.164898] ohci_hcd 0000:00:14.5: hcca frame #0005
[ 4642.164905] ohci_hcd 0000:00:14.5: roothub.a 02001202 POTPGT=2 NOCP NPS
NDP=2(2)
[ 4642.164912] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000
[ 4642.164918] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE
[ 4642.164926] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS
[ 4642.164933] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS
[ 4642.164956] usb usb7: default language 0x0409
[ 4642.164970] usb usb7: udev 1, busnum 7, minor = 768
[ 4642.164974] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4642.164979] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4642.164984] usb usb7: Product: OHCI Host Controller
[ 4642.164988] usb usb7: Manufacturer: Linux 2.6.31r4 ohci_hcd
[ 4642.164992] usb usb7: SerialNumber: 0000:00:14.5
[ 4642.165094] usb usb7: uevent
[ 4642.166223] usb usb7: usb_probe_device
[ 4642.166230] usb usb7: configuration #1 chosen from 1 choice
[ 4642.166246] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 4642.166283] usb 7-0:1.0: uevent
[ 4642.166369] hub 7-0:1.0: usb_probe_interface
[ 4642.166373] hub 7-0:1.0: usb_probe_interface - got id
[ 4642.166378] hub 7-0:1.0: USB hub found
[ 4642.166394] hub 7-0:1.0: 2 ports detected
[ 4642.166398] hub 7-0:1.0: standalone hub
[ 4642.166402] hub 7-0:1.0: no power switching (usb 1.0)
[ 4642.166406] hub 7-0:1.0: no over-current protection
[ 4642.166410] hub 7-0:1.0: power on to power good time: 4ms
[ 4642.166420] hub 7-0:1.0: local power source is good
[ 4642.166425] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 4642.207505] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4642.267500] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4643.097483] ohci_hcd 0000:00:12.0: auto-stop root hub
[ 4643.097504] ohci_hcd 0000:00:12.1: auto-stop root hub
[ 4643.097521] ohci_hcd 0000:00:13.0: auto-stop root hub
[ 4643.347483] ohci_hcd 0000:00:13.1: auto-stop root hub
[ 4643.347501] ohci_hcd 0000:00:14.5: auto-stop root hub
[ 4644.317487] hub 3-0:1.0: hub_suspend
[ 4644.317500] usb usb3: bus auto-suspend
[ 4644.317506] ohci_hcd 0000:00:12.0: suspend root hub
[ 4644.317516] hub 4-0:1.0: hub_suspend
[ 4644.317521] usb usb4: bus auto-suspend
[ 4644.317526] ohci_hcd 0000:00:12.1: suspend root hub
[ 4644.317534] hub 5-0:1.0: hub_suspend
[ 4644.317539] usb usb5: bus auto-suspend
[ 4644.317544] ohci_hcd 0000:00:13.0: suspend root hub
[ 4644.317552] hub 6-0:1.0: hub_suspend
[ 4644.317557] usb usb6: bus auto-suspend
[ 4644.317562] ohci_hcd 0000:00:13.1: suspend root hub
[ 4644.317569] hub 7-0:1.0: hub_suspend
[ 4644.317574] usb usb7: bus auto-suspend
[ 4644.317579] ohci_hcd 0000:00:14.5: suspend root hub
[ 4648.692184] usb usb2: usb resume
[ 4648.692193] ehci_hcd 0000:00:13.2: resume root hub
[ 4648.717486] hub 2-0:1.0: hub_resume
[ 4648.717514] ehci_hcd 0000:00:13.2: GetStatus port 3 status 001403 POWER
sig=k CSC CONNECT
[ 4648.717521] hub 2-0:1.0: port 3: status 0501 change 0001
[ 4648.820828] hub 2-0:1.0: state 7 ports 6 chg 0008 evt 0000
[ 4648.820846] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[ 4648.820871] ehci_hcd 0000:00:13.2: port 3 low speed --> companion
[ 4648.820930] usb usb5: usb resume
[ 4648.830402] ohci_hcd 0000:00:13.0: wakeup root hub
[ 4648.874163] ehci_hcd 0000:00:13.2: GetStatus port 3 status 001002 POWER
sig=se0 CSC
[ 4648.874190] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 4648.874202] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[ 4648.895393] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[ 4648.895410] ehci_hcd 0000:00:13.2: GetStatus port 3 status 001003 POWER
sig=se0 CSC CONNECT
[ 4648.895424] hub 2-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
[ 4648.900403] hub 5-0:1.0: hub_resume
[ 4648.900428] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [2] =
0x00010100 CSC PPS
[ 4648.924159] ehci_hcd 0000:00:13.2: GetStatus port 3 status 001403 POWER
sig=k CSC CONNECT
[ 4649.044158] hub 2-0:1.0: debounce: port 3: total 125ms stable 100ms status
0x501
[ 4649.044175] ehci_hcd 0000:00:13.2: port 3 low speed --> companion
[ 4649.097491] ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER
OWNER sig=se0 CSC
[ 4649.097524] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[ 4649.097534] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0008
[ 4649.097545] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [2] =
0x00010301 CSC LSDA PPS CCS
[ 4649.097554] hub 5-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
[ 4649.217491] hub 5-0:1.0: debounce: port 3: total 100ms stable 100ms status
0x301
[ 4649.240849] ohci_hcd 0000:00:13.0: port[2] reset timeout, stat 00000311
[ 4649.294156] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [2] =
0x00100303 PRSC LSDA PPS PES CCS
[ 4649.347499] usb 5-3: new low speed USB device using ohci_hcd and address 2
[ 4649.370848] ohci_hcd 0000:00:13.0: port[2] reset timeout, stat 00000313
[ 4649.424156] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [2] =
0x00100303 PRSC LSDA PPS PES CCS
[ 4649.501243] usb 5-3: skipped 1 descriptor after interface
[ 4649.501251] usb 5-3: skipped 1 descriptor after interface
[ 4649.503247] usb 5-3: default language 0x0409
[ 4649.508251] usb 5-3: udev 2, busnum 5, minor = 513
[ 4649.508258] usb 5-3: New USB device found, idVendor=046d, idProduct=c518
[ 4649.508263] usb 5-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 4649.508268] usb 5-3: Product: USB Receiver
[ 4649.508272] usb 5-3: Manufacturer: Logitech
[ 4649.508390] usb 5-3: uevent
[ 4649.509935] usb 5-3: usb_probe_device
[ 4649.509942] usb 5-3: configuration #1 chosen from 1 choice
[ 4649.519242] usb 5-3: adding 5-3:1.0 (config #1, interface 0)
[ 4649.519302] usb 5-3:1.0: uevent
[ 4649.519422] usbhid 5-3:1.0: usb_probe_interface
[ 4649.519428] usbhid 5-3:1.0: usb_probe_interface - got id
[ 4649.526229] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input5
[ 4649.526542] generic-usb 0003:046D:C518.0003: input,hidraw0: USB HID v1.11
Mouse [Logitech USB Receiver] on usb-0000:00:13.0-3/input0
[ 4649.526582] usb 5-3: adding 5-3:1.1 (config #1, interface 1)
[ 4649.526626] usb 5-3:1.1: uevent
[ 4649.527441] usbhid 5-3:1.1: usb_probe_interface
[ 4649.527448] usbhid 5-3:1.1: usb_probe_interface - got id
[ 4649.531694] usb 5-3:1.0: uevent
[ 4649.531865] usb 5-3: uevent
[ 4649.532064] usb 5-3:1.0: uevent
[ 4649.532234] usb 5-3: uevent
[ 4649.533871] usb 5-3:1.0: uevent
[ 4649.534280] usb 5-3:1.0: uevent
[ 4649.537474] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/input/input6
[ 4649.537553] drivers/usb/core/file.c: looking for a minor, starting at 96
[ 4649.537671] generic-usb 0003:046D:C518.0004: input,hiddev96,hidraw1: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-3/input1
[ 4649.537731] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0008
[ 4649.543613] usb 5-3:1.1: uevent
[ 4649.543769] usb 5-3: uevent
[ 4649.546227] usb 5-3:1.1: uevent
[ 4651.317487] hub 2-0:1.0: hub_suspend
[ 4651.317501] usb usb2: bus auto-suspend
[ 4651.317507] ehci_hcd 0000:00:13.2: suspend root hub

lsusb -v

Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.31r4 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:14.5
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.31r4 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:13.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 005 Device 002: ID 046d:c518 Logitech, Inc. MX610 Laser Cordless Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc518 MX610 Laser Cordless Mouse
bcdDevice 42.03
iManufacturer 1 Logitech
iProduct 2 USB Receiver
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4 RR42.03_B0039
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
** UNRECOGNIZED: 09 21 11 01 00 01 22 43 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
** UNRECOGNIZED: 09 21 11 01 00 01 22 4f 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.31r4 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:13.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0303 lowspeed power enable connect
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.31r4 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:12.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.31r4 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:12.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.31r4 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:13.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0608 USB-2.0 4-Port HUB
bcdDevice 7.02
iManufacturer 0
iProduct 1 USB2.0 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x00e9
Per-port power switching
Per-port overcurrent protection
TT think time 32 FS bits
Port indicators
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.31r4 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:12.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0503 highspeed power enable connect
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled


about usbmon - what do you want? There

ls -lh /sys/kernel/debug/usb/usbmon
insgesamt 0
-rw------- 1 root root 0 16. Sep 2009 0s
-rw------- 1 root root 0 16. Sep 2009 0u
-rw------- 1 root root 0 16. Sep 15:38 1s
-rw------- 1 root root 0 16. Sep 15:38 1t
-rw------- 1 root root 0 16. Sep 15:38 1u
-rw------- 1 root root 0 16. Sep 15:38 2s
-rw------- 1 root root 0 16. Sep 15:38 2t
-rw------- 1 root root 0 16. Sep 15:38 2u
-rw------- 1 root root 0 16. Sep 16:55 3s
-rw------- 1 root root 0 16. Sep 16:55 3t
-rw------- 1 root root 0 16. Sep 16:55 3u
-rw------- 1 root root 0 16. Sep 16:55 4s
-rw------- 1 root root 0 16. Sep 16:55 4t
-rw------- 1 root root 0 16. Sep 16:55 4u
-rw------- 1 root root 0 16. Sep 16:55 5s
-rw------- 1 root root 0 16. Sep 16:55 5t
-rw------- 1 root root 0 16. Sep 16:55 5u
-rw------- 1 root root 0 16. Sep 16:55 6s
-rw------- 1 root root 0 16. Sep 16:55 6t
-rw------- 1 root root 0 16. Sep 16:55 6u
-rw------- 1 root root 0 16. Sep 16:55 7s
-rw------- 1 root root 0 16. Sep 16:55 7t
-rw------- 1 root root 0 16. Sep 16:55 7u

these files. 5 is related to the mouse?

Gl?ck Auf,
Volker

2009-09-16 15:15:56

by Volker Armin Hemmann

[permalink] [raw]
Subject: Re: 2.6.31 ehci problem - mouse dead on scroll

On Mittwoch 16 September 2009, Alan Stern wrote:
> On Wed, 16 Sep 2009, Volker Armin Hemmann wrote:
> > emm, the mouse is attached through a powered 4port usb 2.0 hub. That is
> > the only way to get it working. If I attach it directly (without loading
> > ohci) it does not work (well, only tried with both Transaction Translator
> > options off), and if I load ohci before I connect it, it is very very
> > jerky. So jerky in fact, that I considered douzends of lockups a day a
> > better alternative.
>
> That is a separate issue and it is a serious bug. If anything, the
> behavior with OHCI should be better than with EHCI. This is worth
> pursuing farther. A usbmon log combined with the dmesg log would help.
> There's no need to include all the boot-up messages in the dmesg log;
> you can clear the log buffer before plugging in the mouse.
>
> In fact, we can probably forget about the EHCI issue. If it works okay
> with the newer TT scheduler, that should be good enough.
>
> Alan Stern
>

ok, I was in the kitchen, I am back and the mouse is extremely jerky.

I cat usbmon/5u into a file for a short while, I hope it is the right file?

Gl?ck Auf
Volker


Attachments:
dmesg_ohci_jerk_attack (24.07 kB)
usbmon_5u (64.58 kB)
Download all attachments

2009-09-21 20:47:33

by Alan Stern

[permalink] [raw]
Subject: Re: 2.6.31 ehci problem - mouse dead on scroll

On Wed, 16 Sep 2009, Volker Armin Hemmann wrote:

> On Mittwoch 16 September 2009, Alan Stern wrote:
> > On Wed, 16 Sep 2009, Volker Armin Hemmann wrote:
> > > emm, the mouse is attached through a powered 4port usb 2.0 hub. That is
> > > the only way to get it working. If I attach it directly (without loading
> > > ohci) it does not work (well, only tried with both Transaction Translator
> > > options off), and if I load ohci before I connect it, it is very very
> > > jerky. So jerky in fact, that I considered douzends of lockups a day a
> > > better alternative.
> >
> > That is a separate issue and it is a serious bug. If anything, the
> > behavior with OHCI should be better than with EHCI. This is worth
> > pursuing farther. A usbmon log combined with the dmesg log would help.
> > There's no need to include all the boot-up messages in the dmesg log;
> > you can clear the log buffer before plugging in the mouse.
> >
> > In fact, we can probably forget about the EHCI issue. If it works okay
> > with the newer TT scheduler, that should be good enough.
> >
> > Alan Stern
> >
>
> ok, I was in the kitchen, I am back and the mouse is extremely jerky.
>
> I cat usbmon/5u into a file for a short while, I hope it is the right file?

It is. The usbmon log shows some unexpected gaps, which probably
correspond to the jerkiness. But there's nothing to indicate that
these gaps are the computer's fault.

Have you tried using a different mouse, or a different brand of mouse,
on this computer? Or using your mouse on a different machine?

Alan Stern

2009-09-21 21:10:08

by Volker Armin Hemmann

[permalink] [raw]
Subject: Re: 2.6.31 ehci problem - mouse dead on scroll

On Montag 21 September 2009, you wrote:

> Have you tried using a different mouse, or a different brand of mouse,
> on this computer? Or using your mouse on a different machine?


I only have one working mouse and one computer so the answer is no ;)

I try to get another one from a friend tomorrow.

Gl?ck Auf,
Volker

2009-09-29 17:31:01

by Volker Armin Hemmann

[permalink] [raw]
Subject: Re: 2.6.31 ehci problem - mouse dead on scroll

On Montag 21 September 2009, Alan Stern wrote:

>
> It is. The usbmon log shows some unexpected gaps, which probably
> correspond to the jerkiness. But there's nothing to indicate that
> these gaps are the computer's fault.
>
> Have you tried using a different mouse, or a different brand of mouse,
> on this computer? Or using your mouse on a different machine?


sorry for the long break. I got a different mouse and tried it for a couple of
hours and haven't got the jerkiness so far.
But:
the other mouse has a lot worse resolution. Which results in a 'slower' mouse.
my own mouse has stretches of hours were it is ok.

So... it might take some more time to trigger it. I will then report back

Gl?ck Auf,
Volker