2009-09-16 09:29:30

by Jie Yang

Subject: [Patch net-next]atl1e:fix 2.6.31-git4 -- ATL1E 0000:03:00.0: DMA-API: device driver frees DMA

use the wrong API when free dma. So when map dma use a flag to demostrate whether it is 'pci_map_single' or 'pci_map_page'. When free the dma, check the flags to select the right APIs('pci_unmap_single' or 'pci_unmap_page').

set the flags type to u16 instead of unsigned long on David's comments.

Signed-off-by: Jie Yang <[email protected]>
---

diff --git a/drivers/net/atl1e/atl1e.h b/drivers/net/atl1e/atl1e.h
index ba48220..490d3b3 100644
--- a/drivers/net/atl1e/atl1e.h
+++ b/drivers/net/atl1e/atl1e.h
@@ -377,10 +377,19 @@ struct atl1e_hw {
*/
struct atl1e_tx_buffer {
struct sk_buff *skb;
+ u16 flags;
+#define ATL1E_TX_PCIMAP_SINGLE 0x0001
+#define ATL1E_TX_PCIMAP_PAGE 0x0002
+#define ATL1E_TX_PCIMAP_TYPE_MASK 0x0003
u16 length;
dma_addr_t dma;
};

+#define ATL1E_SET_PCIMAP_TYPE(tx_buff, type) do { \
+ ((tx_buff)->flags) &= ~ATL1E_TX_PCIMAP_TYPE_MASK; \
+ ((tx_buff)->flags) |= (type); \
+ } while (0)
+
struct atl1e_rx_page {
dma_addr_t dma; /* receive rage DMA address */
u8 *addr; /* receive rage virtual address */
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 69b830f..955da73 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -635,7 +635,11 @@ static void atl1e_clean_tx_ring(struct atl1e_adapter *adapter)
for (index = 0; index < ring_count; index++) {
tx_buffer = &tx_ring->tx_buffer[index];
if (tx_buffer->dma) {
- pci_unmap_page(pdev, tx_buffer->dma,
+ if (tx_buffer->flags & ATL1E_TX_PCIMAP_SINGLE)
+ pci_unmap_single(pdev, tx_buffer->dma,
+ tx_buffer->length, PCI_DMA_TODEVICE);
+ else if (tx_buffer->flags & ATL1E_TX_PCIMAP_PAGE)
+ pci_unmap_page(pdev, tx_buffer->dma,
tx_buffer->length, PCI_DMA_TODEVICE);
tx_buffer->dma = 0;
}
@@ -1220,7 +1224,11 @@ static bool atl1e_clean_tx_irq(struct atl1e_adapter *adapter)
while (next_to_clean != hw_next_to_clean) {
tx_buffer = &tx_ring->tx_buffer[next_to_clean];
if (tx_buffer->dma) {
- pci_unmap_page(adapter->pdev, tx_buffer->dma,
+ if (tx_buffer->flags & ATL1E_TX_PCIMAP_SINGLE)
+ pci_unmap_single(adapter->pdev, tx_buffer->dma,
+ tx_buffer->length, PCI_DMA_TODEVICE);
+ else if (tx_buffer->flags & ATL1E_TX_PCIMAP_PAGE)
+ pci_unmap_page(adapter->pdev, tx_buffer->dma,
tx_buffer->length, PCI_DMA_TODEVICE);
tx_buffer->dma = 0;
}
@@ -1741,6 +1749,7 @@ static void atl1e_tx_map(struct atl1e_adapter *adapter,
tx_buffer->length = map_len;
tx_buffer->dma = pci_map_single(adapter->pdev,
skb->data, hdr_len, PCI_DMA_TODEVICE);
+ ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_SINGLE);
mapped_len += map_len;
use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
@@ -1766,6 +1775,7 @@ static void atl1e_tx_map(struct atl1e_adapter *adapter,
tx_buffer->dma =
pci_map_single(adapter->pdev, skb->data + mapped_len,
map_len, PCI_DMA_TODEVICE);
+ ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_SINGLE);
mapped_len += map_len;
use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
@@ -1801,6 +1811,7 @@ static void atl1e_tx_map(struct atl1e_adapter *adapter,
(i * MAX_TX_BUF_LEN),
tx_buffer->length,
PCI_DMA_TODEVICE);
+ ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_PAGE);
use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
((cpu_to_le32(tx_buffer->length) &

2009-09-17 17:27:20

by David Miller

Subject: Re: [Patch net-next]atl1e:fix 2.6.31-git4 -- ATL1E 0000:03:00.0: DMA-API: device driver frees DMA

From: <[email protected]>
Date: Wed, 16 Sep 2009 17:28:30 +0800

> use the wrong API when free dma. So when map dma use a flag to demostrate whether it is 'pci_map_single' or 'pci_map_page'. When free the dma, check the flags to select the right APIs('pci_unmap_single' or 'pci_unmap_page').
>
> set the flags type to u16 instead of unsigned long on David's comments.
>
> Signed-off-by: Jie Yang <[email protected]>

Applied.