2009-10-06 15:45:58

by Gabe Black

[permalink] [raw]
Subject: [PATCH] Populate subsystem vendor and device IDs for PCI-Bridges

Change to populate the subsystem vendor and subsytem device IDs for
PCI-PCI bridges that implement the PCI Subsystem Vendor ID capability.
Previously bridges left subsystem vendor IDs unpopulated.

Signed-off-by: Gabe Black <[email protected]>
---
drivers/pci/probe.c | 6 ++++++
include/linux/pci_regs.h | 5 +++++
2 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 8105e32..6d90246 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -731,6 +731,7 @@ int pci_setup_device(struct pci_dev *dev)
u32 class;
u8 hdr_type;
struct pci_slot *slot;
+ int pos = 0;

if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type))
return -EIO;
@@ -822,6 +823,11 @@ int pci_setup_device(struct pci_dev *dev)
dev->transparent = ((dev->class & 0xff) == 1);
pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
set_pcie_hotplug_bridge(dev);
+ pos = pci_find_capability(dev, PCI_CAP_ID_SSVID);
+ if (pos) {
+ pci_read_config_word(dev, pos + PCI_SSVID_VENDOR_ID, &dev->subsystem_vendor);
+ pci_read_config_word(dev, pos + PCI_SSVID_DEVICE_ID, &dev->subsystem_device);
+ }
break;

case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index dd0bed4..d3b0cfb 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -365,6 +365,11 @@
#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */
#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */

+/* PCI Bridge Subsystem ID registers */
+
+#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */
+#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem device id register */
+
/* PCI Express capability registers */

#define PCI_EXP_FLAGS 2 /* Capabilities register */
--
1.6.0.4


2009-10-14 01:46:08

by Andrew Morton

[permalink] [raw]
Subject: Re: [PATCH] Populate subsystem vendor and device IDs for PCI-Bridges

On Tue, 6 Oct 2009 10:45:19 -0500 Gabe Black <[email protected]> wrote:

> Change to populate the subsystem vendor and subsytem device IDs for
> PCI-PCI bridges that implement the PCI Subsystem Vendor ID capability.
> Previously bridges left subsystem vendor IDs unpopulated.
>
> Signed-off-by: Gabe Black <[email protected]>
> ---
> drivers/pci/probe.c | 6 ++++++
> include/linux/pci_regs.h | 5 +++++
> 2 files changed, 11 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 8105e32..6d90246 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -731,6 +731,7 @@ int pci_setup_device(struct pci_dev *dev)
> u32 class;
> u8 hdr_type;
> struct pci_slot *slot;
> + int pos = 0;
>
> if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type))
> return -EIO;
> @@ -822,6 +823,11 @@ int pci_setup_device(struct pci_dev *dev)
> dev->transparent = ((dev->class & 0xff) == 1);
> pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
> set_pcie_hotplug_bridge(dev);
> + pos = pci_find_capability(dev, PCI_CAP_ID_SSVID);
> + if (pos) {
> + pci_read_config_word(dev, pos + PCI_SSVID_VENDOR_ID, &dev->subsystem_vendor);
> + pci_read_config_word(dev, pos + PCI_SSVID_DEVICE_ID, &dev->subsystem_device);
> + }
> break;
>
> case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */
> diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
> index dd0bed4..d3b0cfb 100644
> --- a/include/linux/pci_regs.h
> +++ b/include/linux/pci_regs.h
> @@ -365,6 +365,11 @@
> #define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */
> #define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */
>
> +/* PCI Bridge Subsystem ID registers */
> +
> +#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */
> +#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem device id register */
> +
> /* PCI Express capability registers */
>
> #define PCI_EXP_FLAGS 2 /* Capabilities register */

What is the reason for making this change?

2009-11-04 17:42:12

by Jesse Barnes

[permalink] [raw]
Subject: Re: [PATCH] Populate subsystem vendor and device IDs for PCI-Bridges

On Tue, 6 Oct 2009 10:45:19 -0500
Gabe Black <[email protected]> wrote:

> Change to populate the subsystem vendor and subsytem device IDs for
> PCI-PCI bridges that implement the PCI Subsystem Vendor ID capability.
> Previously bridges left subsystem vendor IDs unpopulated.
>
> Signed-off-by: Gabe Black <[email protected]>

Applied to my linux-next branch, thanks.

--
Jesse Barnes, Intel Open Source Technology Center