LinuxLists.cc - [PATCH][RFC] input: remove bios I8042_CTR

2009-10-27 05:34:41

Subject: [PATCH][RFC] input: remove bios I8042_CTR_XLATE check to make keyboard usable

Pressing somekey at early booting phase cause keyboard to be not usable
(The hardware is DELL latitude e5400):

atkbd.c: Unknown key pressed (raw set 2, code 0xd3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
atkbd.c: Unknown key pressed (raw set 2, code 0x1d3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.

i8042.c set i8042_direct to true when the controller init. But the result
is keyboard not usable, The only option is press the power button to shutdown.

So here remove the bios check to fix it.

Signed-off-by: Dave Young <[email protected]>
---
drivers/input/serio/i8042.c | 8 --------
1 file changed, 8 deletions(-)

--- linux-2.6.orig/drivers/input/serio/i8042.c 2009-10-13 08:57:07.000000000 +0800
+++ linux-2.6/drivers/input/serio/i8042.c 2009-10-27 13:15:13.000000000 +0800
@@ -869,14 +869,6 @@ static int i8042_controller_init(void)
spin_unlock_irqrestore(&i8042_lock, flags);

/*
- * If the chip is configured into nontranslated mode by the BIOS, don't
- * bother enabling translating and be happy.
- */
-
- if (~i8042_ctr & I8042_CTR_XLATE)
- i8042_direct = true;
-
-/*
* Set nontranslated mode for the kbd interface if requested by an option.
* After this the kbd interface becomes a simple serial in/out, like the aux
* interface is. We don't do this by default, since it can confuse notebook

2009-10-28 05:43:12

by Dmitry Torokhov

[permalink] [raw]

Subject: Re: [PATCH][RFC] input: remove bios I8042_CTR_XLATE check to make keyboard usable

Hi Dave,

On Tue, Oct 27, 2009 at 01:34:04PM +0800, Dave Young wrote:
>
> Pressing somekey at early booting phase cause keyboard to be not usable
> (The hardware is DELL latitude e5400):
>
> atkbd.c: Unknown key pressed (raw set 2, code 0xd3 on isa0060/serio0).
> atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
> atkbd.c: Unknown key pressed (raw set 2, code 0x1d3 on isa0060/serio0).
> atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
>
> i8042.c set i8042_direct to true when the controller init. But the result
> is keyboard not usable, The only option is press the power button to shutdown.
>
> So here remove the bios check to fix it.
>

I would be a little hesitant to force translation by default on all
architectures, although it may make sense on x86...

Vojtech, you wrote the thing, do you see any issues with forcing
translation? I think most of the x86 boxes work in translated mode and
the only time it is in raw is when BIOS screwed up initialization.

> Signed-off-by: Dave Young <[email protected]>
> ---
> drivers/input/serio/i8042.c | 8 --------
> 1 file changed, 8 deletions(-)
>
> --- linux-2.6.orig/drivers/input/serio/i8042.c 2009-10-13 08:57:07.000000000 +0800
> +++ linux-2.6/drivers/input/serio/i8042.c 2009-10-27 13:15:13.000000000 +0800
> @@ -869,14 +869,6 @@ static int i8042_controller_init(void)
> spin_unlock_irqrestore(&i8042_lock, flags);
>
> /*
> - * If the chip is configured into nontranslated mode by the BIOS, don't
> - * bother enabling translating and be happy.
> - */
> -
> - if (~i8042_ctr & I8042_CTR_XLATE)
> - i8042_direct = true;
> -
> -/*
> * Set nontranslated mode for the kbd interface if requested by an option.
> * After this the kbd interface becomes a simple serial in/out, like the aux
> * interface is. We don't do this by default, since it can confuse notebook

--
Dmitry

2009-10-28 10:03:10

by Vojtech Pavlik

[permalink] [raw]

Subject: Re: [PATCH][RFC] input: remove bios I8042_CTR_XLATE check to make keyboard usable

On Tue, Oct 27, 2009 at 10:43:10PM -0700, Dmitry Torokhov wrote:
> Hi Dave,
>
> On Tue, Oct 27, 2009 at 01:34:04PM +0800, Dave Young wrote:
> >
> > Pressing somekey at early booting phase cause keyboard to be not usable
> > (The hardware is DELL latitude e5400):

Does early booting mean while the BIOS is coming up? Does the keyboard
work in GRUB then? Or is it during the early init of the Linux kernel?

> > atkbd.c: Unknown key pressed (raw set 2, code 0xd3 on isa0060/serio0).
> > atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
> > atkbd.c: Unknown key pressed (raw set 2, code 0x1d3 on isa0060/serio0).
> > atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
> >
> > i8042.c set i8042_direct to true when the controller init. But the result
> > is keyboard not usable, The only option is press the power button to shutdown.
> >
> > So here remove the bios check to fix it.

My question would be: Why this happens? Could it be that the probe is
confused by the keypress and reads the CTR incorrectly? Or is it just
that the keyboard controller is in fact in translating mode, yet the CTR
indicates otherwise?

A i8042.debug=1 log of the bad init would be good.

> I would be a little hesitant to force translation by default on all
> architectures, although it may make sense on x86...

The old 2.4 kernel sources say that there are some IBM PowerPC portables
that don't support translation at all. I wouldn't be surprised if there
were more examples like that in the embedded space.

I'm not aware of any x86 machine that wouldn't support the translated
mode.

> Vojtech, you wrote the thing, do you see any issues with forcing
> translation? I think most of the x86 boxes work in translated mode and
> the only time it is in raw is when BIOS screwed up initialization.
>
> > Signed-off-by: Dave Young <[email protected]>
> > ---
> > drivers/input/serio/i8042.c | 8 --------
> > 1 file changed, 8 deletions(-)
> >
> > --- linux-2.6.orig/drivers/input/serio/i8042.c 2009-10-13 08:57:07.000000000 +0800
> > +++ linux-2.6/drivers/input/serio/i8042.c 2009-10-27 13:15:13.000000000 +0800
> > @@ -869,14 +869,6 @@ static int i8042_controller_init(void)
> > spin_unlock_irqrestore(&i8042_lock, flags);
> >
> > /*
> > - * If the chip is configured into nontranslated mode by the BIOS, don't
> > - * bother enabling translating and be happy.
> > - */
> > -
> > - if (~i8042_ctr & I8042_CTR_XLATE)
> > - i8042_direct = true;
> > -
> > -/*
> > * Set nontranslated mode for the kbd interface if requested by an option.
> > * After this the kbd interface becomes a simple serial in/out, like the aux
> > * interface is. We don't do this by default, since it can confuse notebook

--
Vojtech Pavlik
Director SuSE Labs

2009-10-28 10:43:10

by Dave Young

[permalink] [raw]

Subject: Re: [PATCH][RFC] input: remove bios I8042_CTR_XLATE check to make keyboard usable

On Wed, Oct 28, 2009 at 11:03:18AM +0100, Vojtech Pavlik wrote:
> On Tue, Oct 27, 2009 at 10:43:10PM -0700, Dmitry Torokhov wrote:
> > Hi Dave,
> >
> > On Tue, Oct 27, 2009 at 01:34:04PM +0800, Dave Young wrote:
> > >
> > > Pressing somekey at early booting phase cause keyboard to be not usable
> > > (The hardware is DELL latitude e5400):
>
> Does early booting mean while the BIOS is coming up? Does the keyboard
> work in GRUB then? Or is it during the early init of the Linux kernel?

Keyboard work under lilo.
For the early booting I means the early init of the linux kernel

>
> > > atkbd.c: Unknown key pressed (raw set 2, code 0xd3 on isa0060/serio0).
> > > atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
> > > atkbd.c: Unknown key pressed (raw set 2, code 0x1d3 on isa0060/serio0).
> > > atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
> > >
> > > i8042.c set i8042_direct to true when the controller init. But the result
> > > is keyboard not usable, The only option is press the power button to shutdown.
> > >
> > > So here remove the bios check to fix it.
>
> My question would be: Why this happens? Could it be that the probe is
> confused by the keypress and reads the CTR incorrectly? Or is it just
> that the keyboard controller is in fact in translating mode, yet the CTR
> indicates otherwise?
>
> A i8042.debug=1 log of the bad init would be good.

Here it is (retrieve from syslog):

Oct 28 18:31:40 darkstar kernel: [ 0.000000] ACPI: RSDP 000fbce0 00024 (v02 DELL )
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ACPI: XSDT 3d391e00 00064 (v01 DELL M09 27D9041D ASL 00000061)
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ACPI: FACP 3d391c9c 000F4 (v04 DELL M09 27D9041D ASL 00000061)
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ACPI: DSDT 3d392400 06857 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ACPI: FACS 3d3a0c00 00040
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ACPI: HPET 3d391f00 00038 (v01 DELL M09 00000001 ASL 00000061)
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ACPI: DMAR 3d3a0400 000F8 (v01 DELL M09 27D9041D ASL 00000061)
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ACPI: APIC 3d392000 00068 (v01 DELL M09 27D9041D ASL 00000047)
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ACPI: ASF! 3d391c00 00076 (v32 DELL M09 27D9041D ASL 00000061)
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ACPI: MCFG 3d391fc0 0003E (v16 DELL M09 27D9041D ASL 00000061)
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ACPI: TCPA 3d392300 00032 (v01 00000000 ASL 00000000)
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ACPI: SSDT 3d3902e7 0066C (v01 PmRef CpuPm 00003000 INTL 20050624)
Oct 28 18:31:40 darkstar kernel: [ 0.000000] Zone PFN ranges:
Oct 28 18:31:40 darkstar kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000
Oct 28 18:31:40 darkstar kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe
Oct 28 18:31:40 darkstar kernel: [ 0.000000] HighMem 0x000377fe -> 0x0003d38d
Oct 28 18:31:40 darkstar kernel: [ 0.000000] Movable zone start PFN for each node
Oct 28 18:31:40 darkstar kernel: [ 0.000000] early_node_map[2] active PFN ranges
Oct 28 18:31:40 darkstar kernel: [ 0.000000] 0: 0x00000000 -> 0x0000009f
Oct 28 18:31:40 darkstar kernel: [ 0.000000] 0: 0x00000100 -> 0x0003d38d
Oct 28 18:31:40 darkstar kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 248708
Oct 28 18:31:40 darkstar kernel: [ 0.000000] Console: colour dummy device 80x25
Oct 28 18:31:40 darkstar kernel: [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ... MAX_LOCK_DEPTH: 48
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ... CLASSHASH_SIZE: 4096
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
Oct 28 18:31:40 darkstar kernel: [ 0.000000] ... CHAINHASH_SIZE: 16384
Oct 28 18:31:40 darkstar kernel: [ 0.000000] memory used by lock dependency info: 3567 kB
Oct 28 18:31:40 darkstar kernel: [ 0.000000] per task-struct memory footprint: 1152 bytes
Oct 28 18:31:40 darkstar kernel: [ 0.000000] Fast TSC calibration using PIT
Oct 28 18:31:40 darkstar kernel: [ 0.000000] Detected 1995.305 MHz processor.
Oct 28 18:31:40 darkstar kernel: [ 0.003477] Mount-cache hash table entries: 512
Oct 28 18:31:40 darkstar kernel: [ 0.073332] lockdep: fixing up alternatives.
Oct 28 18:31:40 darkstar kernel: [ 0.167889] khelper used greatest stack depth: 6736 bytes left
Oct 28 18:31:40 darkstar kernel: [ 0.167906] Time: 18:31:22 Date: 10/28/09
Oct 28 18:31:40 darkstar kernel: [ 0.183926] bio: create slab <bio-0> at 0
Oct 28 18:31:40 darkstar kernel: [ 0.233917] ACPI: SSDT 3d3a0c80 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
Oct 28 18:31:40 darkstar kernel: [ 0.699300] highmem bounce pool size: 64 pages
Oct 28 18:31:40 darkstar kernel: [ 0.707157] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 28 18:31:40 darkstar kernel: [ 0.713658] ALI M7101 PMU not found.
Oct 28 18:31:40 darkstar kernel: [ 0.727193] Console: switching to colour frame buffer device 128x48
Oct 28 18:31:40 darkstar kernel: [ 0.745940] ACPI: SSDT 3d390953 002C3 (v01 PmRef BspIst 00003000 INTL 20050624)
Oct 28 18:31:40 darkstar kernel: [ 0.747451] ACPI: SSDT 3d390ded 005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
Oct 28 18:31:40 darkstar kernel: [ 0.750953] ACPI: SSDT 3d390c16 001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
Oct 28 18:31:40 darkstar kernel: [ 0.752370] ACPI: SSDT 3d3913b3 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
Oct 28 18:31:40 darkstar kernel: [ 0.808726] i8k: unable to get SMM BIOS version
Oct 28 18:31:40 darkstar kernel: [ 0.831297] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Oct 28 18:31:40 darkstar kernel: [ 0.836900] Hangcheck: Using get_cycles().
Oct 28 18:31:40 darkstar kernel: [ 0.858621] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
Oct 28 18:31:40 darkstar kernel: [ 0.888873] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 9 (20090903/nsrepair-132)
Oct 28 18:31:40 darkstar kernel: [ 0.894759] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 10 (20090903/nsrepair-132)
Oct 28 18:31:40 darkstar kernel: [ 0.900646] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 11 (20090903/nsrepair-132)
Oct 28 18:31:40 darkstar kernel: [ 0.906408] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 12 (20090903/nsrepair-132)
Oct 28 18:31:40 darkstar kernel: [ 1.006024] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B
Oct 28 18:31:40 darkstar kernel: [ 1.022192] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C
Oct 28 18:31:40 darkstar kernel: [ 1.033201] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-D
Oct 28 18:31:40 darkstar kernel: [ 1.652138] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Oct 28 18:31:40 darkstar kernel: [ 1.657946] Console: switching to colour dummy device 80x25
Oct 28 18:31:40 darkstar kernel: [ 1.940032] async/0 used greatest stack depth: 6204 bytes left
Oct 28 18:31:40 darkstar kernel: [ 2.033774] Console: switching to colour frame buffer device 160x50
Oct 28 18:31:40 darkstar kernel: [ 2.114389] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
Oct 28 18:31:40 darkstar kernel: [ 2.657074] i8042.c: Warning: Keylock active.
Oct 28 18:31:40 darkstar kernel: [ 2.666119] Driver 'rtc_cmos' needs updating - please use bus_type methods
Oct 28 18:31:40 darkstar kernel: [ 3.796606] Netfilter messages via NETLINK v0.30.
Oct 28 18:31:40 darkstar kernel: [ 3.796700] nf_conntrack version 0.5.0 (15347 buckets, 61388 max)
Oct 28 18:31:40 darkstar kernel: [ 3.797524] ctnetlink v0.93: registering with nfnetlink.
Oct 28 18:31:40 darkstar kernel: [ 4.196617] sda1 sda2 sda3 sda4 <
Oct 28 18:31:40 darkstar kernel: [ 4.234941] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Oct 28 18:31:40 darkstar kernel: [ 4.415478] sda5
Oct 28 18:31:40 darkstar kernel: [ 4.662008] sda6 sda7
Oct 28 18:31:40 darkstar kernel: [ 4.696955] sda8 >
Oct 28 18:31:40 darkstar kernel: [ 4.696839] atkbd.c: Unknown key pressed (raw set 2, code 0x125 on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 4.696839] atkbd.c: Use 'setkeycodes 25 <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 4.783405] registered taskstats version 1
Oct 28 18:31:40 darkstar kernel: [ 4.811084] Magic number: 13:516:545
Oct 28 18:31:40 darkstar kernel: [ 4.832325] atkbd.c: Unknown key pressed (raw set 2, code 0x124 on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 4.832327] atkbd.c: Use 'setkeycodes 24 <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 5.081883] atkbd.c: Unknown key pressed (raw set 2, code 0x126 on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 5.085138] atkbd.c: Use 'setkeycodes 26 <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 5.125712] atkbd.c: Unknown key pressed (raw set 2, code 0x125 on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 5.128995] atkbd.c: Use 'setkeycodes 25 <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 5.266914] async/1 used greatest stack depth: 5944 bytes left
Oct 28 18:31:40 darkstar kernel: [ 5.288891] atkbd.c: Unknown key pressed (raw set 2, code 0x124 on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 5.292146] atkbd.c: Use 'setkeycodes 24 <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 5.390758] atkbd.c: Unknown key pressed (raw set 2, code 0x125 on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 5.410290] atkbd.c: Use 'setkeycodes 25 <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 5.410290] atkbd.c: Unknown key pressed (raw set 2, code 0x121 on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 5.410290] atkbd.c: Use 'setkeycodes 21 <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 5.544134] atkbd.c: Unknown key pressed (raw set 2, code 0x124 on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 5.545078] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
Oct 28 18:31:40 darkstar kernel: [ 5.547392] atkbd.c: Use 'setkeycodes 24 <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 5.659418] atkbd.c: Unknown key pressed (raw set 2, code 0x126 on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 5.680843] atkbd.c: Use 'setkeycodes 26 <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 5.719052] atkbd.c: Unknown key pressed (raw set 2, code 0x125 on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 5.719055] atkbd.c: Use 'setkeycodes 25 <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 5.798708] atkbd.c: Unknown key pressed (raw set 2, code 0x121 on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 5.802006] atkbd.c: Use 'setkeycodes 21 <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 5.858461] atkbd.c: Unknown key pressed (raw set 2, code 0x124 on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 5.861732] atkbd.c: Use 'setkeycodes 24 <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 6.047765] atkbd.c: Unknown key pressed (raw set 2, code 0x120 on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 6.051009] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 6.051009] atkbd.c: Unknown key pressed (raw set 2, code 0x11e on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 6.051009] atkbd.c: Use 'setkeycodes 1e <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 6.051009] atkbd.c: Unknown key pressed (raw set 2, code 0x11f on isa0060/serio0).
Oct 28 18:31:40 darkstar kernel: [ 6.051009] atkbd.c: Use 'setkeycodes 1f <keycode>' to make it known.
Oct 28 18:31:40 darkstar kernel: [ 8.220557] cdrom_id used greatest stack depth: 5856 bytes left
Oct 28 18:31:40 darkstar kernel: [ 17.219715] REISERFS warning (device sda5): reiserfs_fill_super: CONFIG_REISERFS_CHECK is set ON
Oct 28 18:31:40 darkstar kernel: [ 17.230511] REISERFS warning (device sda5): reiserfs_fill_super: - it is slow mode for debugging.
Oct 28 18:31:40 darkstar kernel: [ 17.374339] mount used greatest stack depth: 5796 bytes left
Oct 28 18:31:46 darkstar kernel: [ 24.237922] update-mime-dat used greatest stack depth: 5772 bytes left
Oct 28 18:31:47 darkstar kernel: [ 25.233169] atkbd.c: Unknown key pressed (raw set 2, code 0x20 on isa0060/serio0).
Oct 28 18:31:47 darkstar kernel: [ 25.233176] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
Oct 28 18:31:47 darkstar kernel: [ 25.358673] atkbd.c: Unknown key pressed (raw set 2, code 0x120 on isa0060/serio0).
Oct 28 18:31:47 darkstar kernel: [ 25.358681] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
Oct 28 18:31:47 darkstar kernel: [ 25.563353] atkbd.c: Unknown key pressed (raw set 2, code 0x20 on isa0060/serio0).
Oct 28 18:31:47 darkstar kernel: [ 25.563360] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
Oct 28 18:31:47 darkstar kernel: [ 25.687429] atkbd.c: Unknown key pressed (raw set 2, code 0x120 on isa0060/serio0).
Oct 28 18:31:47 darkstar kernel: [ 25.687437] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
Oct 28 18:31:48 darkstar kernel: [ 25.841800] atkbd.c: Unknown key pressed (raw set 2, code 0x20 on isa0060/serio0).
Oct 28 18:31:48 darkstar kernel: [ 25.841808] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
Oct 28 18:31:48 darkstar kernel: [ 25.956515] atkbd.c: Unknown key pressed (raw set 2, code 0x120 on isa0060/serio0).
Oct 28 18:31:48 darkstar kernel: [ 25.956522] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.

>
> > I would be a little hesitant to force translation by default on all
> > architectures, although it may make sense on x86...
>
> The old 2.4 kernel sources say that there are some IBM PowerPC portables
> that don't support translation at all. I wouldn't be surprised if there
> were more examples like that in the embedded space.
>
> I'm not aware of any x86 machine that wouldn't support the translated
> mode.
>
> > Vojtech, you wrote the thing, do you see any issues with forcing
> > translation? I think most of the x86 boxes work in translated mode and
> > the only time it is in raw is when BIOS screwed up initialization.
> >
> > > Signed-off-by: Dave Young <[email protected]>
> > > ---
> > > drivers/input/serio/i8042.c | 8 --------
> > > 1 file changed, 8 deletions(-)
> > >
> > > --- linux-2.6.orig/drivers/input/serio/i8042.c 2009-10-13 08:57:07.000000000 +0800
> > > +++ linux-2.6/drivers/input/serio/i8042.c 2009-10-27 13:15:13.000000000 +0800
> > > @@ -869,14 +869,6 @@ static int i8042_controller_init(void)
> > > spin_unlock_irqrestore(&i8042_lock, flags);
> > >
> > > /*
> > > - * If the chip is configured into nontranslated mode by the BIOS, don't
> > > - * bother enabling translating and be happy.
> > > - */
> > > -
> > > - if (~i8042_ctr & I8042_CTR_XLATE)
> > > - i8042_direct = true;
> > > -
> > > -/*
> > > * Set nontranslated mode for the kbd interface if requested by an option.
> > > * After this the kbd interface becomes a simple serial in/out, like the aux
> > > * interface is. We don't do this by default, since it can confuse notebook
>
> --
> Vojtech Pavlik
> Director SuSE Labs

2009-10-29 00:34:15

by Dave Young

[permalink] [raw]

Subject: Re: [PATCH][RFC] input: remove bios I8042_CTR_XLATE check to make keyboard usable

On Wed, Oct 28, 2009 at 06:42:12PM > On Wed, Oct 28, 2009 > > On Tue, Oct 27, > > > Hi Dave,
> > >
> > > On Tue, Oct > > > >
> > > > Pressing > > > > (The > >
> > Does early booting > > work in GRUB then? >
> Keyboard work under lilo.
> For the early booting >
> >
> > > > atkbd.c: > > > > atkbd.c: > > > > atkbd.c: > > > > atkbd.c: > > > >
> > > > i8042.c > > > > is keyboard > > > >
> > > > So here > >
> > My question would > > confused by the > > that the keyboard > > indicates otherwise?
> >
> > A i8042.debug=1 >
> Here it is (retrieve
Syslog redirect the debug
Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:40 darkstar kernel: [ Oct 28 18:31:47 darkstar kernel: [ Oct 28 18:31:47 darkstar kernel: [ Oct 28 18:31:47 darkstar kernel: [ Oct 28 18:31:47 darkstar kernel: [ Oct 28 18:31:48 darkstar kernel: [ Oct 28 18:31:48 darkstar kernel: [
>
> Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:40 darkstar kernel: [ > Oct 28 18:31:46 darkstar kernel: [ > Oct 28 18:31:47 darkstar kernel: [ > Oct 28 18:31:47 darkstar kernel: [ > Oct 28 18:31:47 darkstar kernel: [ > Oct 28 18:31:47 darkstar kernel: [ > Oct 28 18:31:47 darkstar kernel: [ > Oct 28 18:31:47 darkstar kernel: [ > Oct 28 18:31:47 darkstar kernel: [ > Oct 28 18:31:47 darkstar kernel: [ > Oct 28 18:31:48 darkstar kernel: [ > Oct 28 18:31:48 darkstar kernel: [ > Oct 28 18:31:48 darkstar kernel: [ > Oct 28 18:31:48 darkstar kernel: [ >
> >
> > > I would be > > > architectures, > >
> > The old 2.4 kernel > > that don't support > > were more examples > >
> > I'm not aware of > > mode.
> >
> > > Vojtech, you > > > translation? > > > the only time > > >
> > > > Signed-off-by: > > > > ---
> > > > drivers/input > > > > 1 file > > > >
> > > > --- linux-2.6. > > > > +++ linux-2.6/ > > > > @@ -869,14 > > > > spin_unlock_ > > > >
> > > > /*
> > > > - * If > > > > - * bother > > > > - */
> > > > -
> > > > - if > > > > - i8042_direct > > > > -
> > > > -/*
> > > > * Set > > > > * After > > > > * interface > >
> > --
> > Vojtech Pavlik
> > Director SuSE Labs +0800, Dave Young wrote:
at 11:03:18AM +0100, Vojtech Pavlik wrote:
2009 at 10:43:10PM -0700, Dmitry Torokhov wrote:
27, 2009 at 01:34:04PM +0800, Dave Young wrote:
somekey at early booting phase cause keyboard to be not usable
hardware is DELL latitude e5400):
mean while the BIOS is coming up? Does the keyboard
Or is it during the early init of the Linux kernel?
I means the early init of the linux kernel
Unknown key pressed (raw set 2, code 0xd3 on isa0060/serio0).
Use 'setkeycodes e053 <keycode>' to make it known.
Unknown key pressed (raw set 2, code 0x1d3 on isa0060/serio0).
Use 'setkeycodes e053 <keycode>' to make it known.
set i8042_direct to true when the controller init. But the result
not usable, The only option is press the power button to shutdown.
remove the bios check to fix it.
be: Why this happens? Could it be that the probe is
keypress and reads the CTR incorrectly? Or is it just
controller is in fact in translating mode, yet the CTR
log of the bad init would be good.
from syslog):
info to another log file, sorry, post again:
2.656902] drivers/input/serio/i8042.c: 20 <- i8042 (flush, kbd) [0]
2.657060] drivers/input/serio/i8042.c: 20 -> i8042 (command) [0]
2.657068] drivers/input/serio/i8042.c: a0 <- i8042 (return) [0]
2.657131] drivers/input/serio/i8042.c: 60 -> i8042 (command) [0]
2.657346] drivers/input/serio/i8042.c: b0 -> i8042 (parameter) [0]
2.657406] drivers/input/serio/i8042.c: 65 <- i8042 (flush, kbd) [0]
2.657465] drivers/input/serio/i8042.c: d3 -> i8042 (command) [0]
2.657510] drivers/input/serio/i8042.c: 5a -> i8042 (parameter) [0]
2.657510] drivers/input/serio/i8042.c: 5a <- i8042 (return) [0]
2.661484] drivers/input/serio/i8042.c: a7 -> i8042 (command) [2]
2.661541] drivers/input/serio/i8042.c: 20 -> i8042 (command) [2]
2.661863] drivers/input/serio/i8042.c: b0 <- i8042 (return) [2]
2.661868] drivers/input/serio/i8042.c: a8 -> i8042 (command) [2]
2.661925] drivers/input/serio/i8042.c: 20 -> i8042 (command) [2]
2.662247] drivers/input/serio/i8042.c: 90 <- i8042 (return) [2]
2.662252] drivers/input/serio/i8042.c: 60 -> i8042 (command) [2]
2.662310] drivers/input/serio/i8042.c: b0 -> i8042 (parameter) [2]
2.662426] drivers/input/serio/i8042.c: d3 -> i8042 (command) [2]
2.662589] drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [2]
2.662861] drivers/input/serio/i8042.c: f0 <- i8042 (return) [2]
2.662866] drivers/input/serio/i8042.c: d3 -> i8042 (command) [2]
2.662924] drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [2]
2.663196] drivers/input/serio/i8042.c: 56 <- i8042 (return) [2]
2.663201] drivers/input/serio/i8042.c: d3 -> i8042 (command) [2]
2.663260] drivers/input/serio/i8042.c: a4 -> i8042 (parameter) [2]
2.663584] drivers/input/serio/i8042.c: a4 <- i8042 (return) [2]
2.663623] drivers/input/serio/i8042.c: 60 -> i8042 (command) [2]
2.663682] drivers/input/serio/i8042.c: 92 -> i8042 (parameter) [2]
2.663813] drivers/input/serio/i8042.c: 60 -> i8042 (command) [2]
2.663924] drivers/input/serio/i8042.c: 83 -> i8042 (parameter) [2]
2.665885] drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [3]
3.735576] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [324]
3.735636] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [324]
3.747159] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [327]
3.759002] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [327]
3.765945] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [333]
3.766539] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [333]
3.770884] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
3.785997] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [339]
3.799735] lib80211_crypt: registered algorithm 'NULL'
3.939601] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [385]
3.939740] drivers/input/serio/i8042.c: 25 <- i8042 (interrupt, 0, 1) [385]
3.939872] drivers/input/serio/i8042.c: 1e <- i8042 (interrupt, 0, 1) [385]
3.940576] PM: Checking image partition /dev/sda8
3.940620] PM: Resume from partition 8:8
3.940622] PM: Checking hibernation image.
4.195691] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [462]
4.195773] drivers/input/serio/i8042.c: 60 -> i8042 (command) [462]
4.195885] drivers/input/serio/i8042.c: 82 -> i8042 (parameter) [462]
4.195995] drivers/input/serio/i8042.c: 60 -> i8042 (command) [462]
4.196106] drivers/input/serio/i8042.c: 83 -> i8042 (parameter) [462]
4.196116] drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, 0, 0) [462]
4.196209] drivers/input/serio/i8042.c: d4 -> i8042 (command) [462]
4.196372] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [462]
4.217278] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [469]
4.217289] drivers/input/serio/i8042.c: Interrupt 1, without any data [469]
4.228066] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [472]
4.228195] drivers/input/serio/i8042.c: 21 <- i8042 (interrupt, 0, 1) [472]
4.228769] drivers/input/serio/i8042.c: 25 <- i8042 (interrupt, 0, 1) [472]
4.228914] drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, 0, 1) [472]
4.230807] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [472]
4.232831] drivers/input/serio/i8042.c: 24 <- i8042 (interrupt, 0, 1) [473]
4.232984] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [473]
4.234898] drivers/input/serio/i8042.c: ab <- i8042 (interrupt, 0, 1) [474]
4.245864] drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, 0, 1) [477]
4.256660] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [480]
4.256785] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [480]
4.256806] drivers/input/serio/i8042.c: 60 -> i8042 (command) [480]
4.256866] drivers/input/serio/i8042.c: 81 -> i8042 (parameter) [480]
4.256976] drivers/input/serio/i8042.c: 60 -> i8042 (command) [480]
4.257087] drivers/input/serio/i8042.c: 83 -> i8042 (parameter) [480]
4.257293] drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [480]
4.257308] sr 1:0:0:0: Attached scsi CD-ROM sr0
4.257608] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [481]
4.268434] drivers/input/serio/i8042.c: ab <- i8042 (interrupt, 0, 1) [484]
4.268578] drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, 0, 1) [484]
4.268611] drivers/input/serio/i8042.c: 60 -> i8042 (command) [484]
4.268670] drivers/input/serio/i8042.c: 82 -> i8042 (parameter) [484]
4.268780] drivers/input/serio/i8042.c: 60 -> i8042 (command) [484]
4.268892] drivers/input/serio/i8042.c: 83 -> i8042 (parameter) [484]
4.269043] drivers/input/serio/i8042.c: d4 -> i8042 (command) [484]
4.269154] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [484]
4.271872] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [485]
4.272932] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [485]
4.272970] drivers/input/serio/i8042.c: d4 -> i8042 (command) [485]
4.273032] drivers/input/serio/i8042.c: f6 -> i8042 (parameter) [485]
4.275679] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [486]
4.275733] drivers/input/serio/i8042.c: d4 -> i8042 (command) [486]
4.275794] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [486]
4.276084] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [486]
4.276113] drivers/input/serio/i8042.c: d4 -> i8042 (command) [486]
4.276175] drivers/input/serio/i8042.c: 0a -> i8042 (parameter) [486]
4.281510] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [488]
4.281589] drivers/input/serio/i8042.c: d4 -> i8042 (command) [488]
4.284074] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [488]
4.284429] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [489]
4.284471] drivers/input/serio/i8042.c: d4 -> i8042 (command) [489]
4.285535] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [489]
4.290952] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [490]
4.291064] drivers/input/serio/i8042.c: d4 -> i8042 (command) [491]
4.291129] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [491]
4.291557] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [491]
4.291621] drivers/input/serio/i8042.c: d4 -> i8042 (command) [491]
4.291685] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [491]
4.296717] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [492]
4.296810] drivers/input/serio/i8042.c: d4 -> i8042 (command) [493]
4.296876] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [493]
4.297260] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [493]
4.297327] drivers/input/serio/i8042.c: d4 -> i8042 (command) [493]
4.297391] drivers/input/serio/i8042.c: 3c -> i8042 (parameter) [493]
4.302484] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [494]
4.302572] drivers/input/serio/i8042.c: d4 -> i8042 (command) [494]
4.302636] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [494]
4.303025] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [494]
4.303097] drivers/input/serio/i8042.c: d4 -> i8042 (command) [494]
4.303161] drivers/input/serio/i8042.c: 28 -> i8042 (parameter) [494]
4.308265] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [496]
4.308350] drivers/input/serio/i8042.c: d4 -> i8042 (command) [496]
4.310938] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [496]
4.311258] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [497]
4.311306] drivers/input/serio/i8042.c: d4 -> i8042 (command) [497]
4.311475] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [497]
4.311493] drivers/input/serio/i8042.c: a4 <- i8042 (interrupt, 0, 1) [497]
4.316576] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [498]
4.316666] drivers/input/serio/i8042.c: d4 -> i8042 (command) [498]
4.316731] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [498]
4.317121] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [499]
4.317196] drivers/input/serio/i8042.c: d4 -> i8042 (command) [499]
4.317260] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [499]
4.322687] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [500]
4.322774] drivers/input/serio/i8042.c: d4 -> i8042 (command) [500]
4.322839] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [500]
4.323235] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [500]
4.323308] drivers/input/serio/i8042.c: d4 -> i8042 (command) [500]
4.323372] drivers/input/serio/i8042.c: 3c -> i8042 (parameter) [500]
4.328416] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [502]
4.328502] drivers/input/serio/i8042.c: d4 -> i8042 (command) [502]
4.328567] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [502]
4.328955] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [502]
4.329027] drivers/input/serio/i8042.c: d4 -> i8042 (command) [502]
4.329091] drivers/input/serio/i8042.c: 28 -> i8042 (parameter) [502]
4.334235] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [504]
4.334320] drivers/input/serio/i8042.c: d4 -> i8042 (command) [504]
4.336699] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [504]
4.337031] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [505]
4.337079] drivers/input/serio/i8042.c: d4 -> i8042 (command) [505]
4.337144] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [505]
4.342815] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [506]
4.342876] drivers/input/serio/i8042.c: d4 -> i8042 (command) [506]
4.342941] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [506]
4.343350] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [506]
4.343429] drivers/input/serio/i8042.c: d4 -> i8042 (command) [507]
4.343494] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [507]
4.348529] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [508]
4.348616] drivers/input/serio/i8042.c: d4 -> i8042 (command) [508]
4.348680] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [508]
4.351647] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [509]
4.352722] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [509]
4.352809] drivers/input/serio/i8042.c: d4 -> i8042 (command) [509]
4.352873] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [509]
4.353267] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [509]
4.353340] drivers/input/serio/i8042.c: d4 -> i8042 (command) [509]
4.353405] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [509]
4.358597] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [511]
4.358681] drivers/input/serio/i8042.c: d4 -> i8042 (command) [511]
4.361376] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [511]
4.361717] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [512]
4.361765] drivers/input/serio/i8042.c: d4 -> i8042 (command) [512]
4.361882] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [512]
4.361900] drivers/input/serio/i8042.c: 25 <- i8042 (interrupt, 0, 1) [512]
4.367150] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [514]
4.367238] drivers/input/serio/i8042.c: d4 -> i8042 (command) [514]
4.367303] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [514]
4.367688] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [514]
4.367760] drivers/input/serio/i8042.c: d4 -> i8042 (command) [514]
4.367825] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [514]
4.372928] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [515]
4.373011] drivers/input/serio/i8042.c: d4 -> i8042 (command) [515]
4.373076] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [515]
4.373475] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [516]
4.373548] drivers/input/serio/i8042.c: d4 -> i8042 (command) [516]
4.373612] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [516]
4.378700] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [517]
4.378785] drivers/input/serio/i8042.c: d4 -> i8042 (command) [517]
4.378849] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [517]
4.381651] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [518]
4.384750] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [519]
4.387499] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [520]
4.387715] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, 1, 12) [520]
4.387800] drivers/input/serio/i8042.c: d4 -> i8042 (command) [520]
4.387865] drivers/input/serio/i8042.c: f6 -> i8042 (parameter) [520]
4.390680] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [521]
4.390765] drivers/input/serio/i8042.c: d4 -> i8042 (command) [521]
4.390830] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [521]
4.391257] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [521]
4.391330] drivers/input/serio/i8042.c: d4 -> i8042 (command) [521]
4.391395] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [521]
4.396501] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [522]
4.396588] drivers/input/serio/i8042.c: d4 -> i8042 (command) [522]
4.396652] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [522]
4.399454] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [523]
4.399539] drivers/input/serio/i8042.c: d4 -> i8042 (command) [523]
4.399603] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [523]
4.402405] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [524]
4.402491] drivers/input/serio/i8042.c: d4 -> i8042 (command) [524]
4.404975] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [524]
4.407839] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [526]
4.407899] drivers/input/serio/i8042.c: d4 -> i8042 (command) [526]
4.407964] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [526]
4.410812] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [527]
4.414815] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [528]
4.414948] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [528]
4.415202] drivers/input/serio/i8042.c: 64 <- i8042 (interrupt, 1, 12) [528]
4.415289] drivers/input/serio/i8042.c: d4 -> i8042 (command) [528]
4.415354] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [528]
4.415696] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [528]
4.436998] drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, 0, 1) [535]
4.437071] drivers/input/serio/i8042.c: d4 -> i8042 (command) [535]
4.437136] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [535]
4.442400] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [536]
4.442464] drivers/input/serio/i8042.c: d4 -> i8042 (command) [536]
4.445053] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [536]
4.448139] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [538]
4.448198] drivers/input/serio/i8042.c: d4 -> i8042 (command) [538]
4.448262] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [538]
4.451545] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [539]
4.451634] drivers/input/serio/i8042.c: d4 -> i8042 (command) [539]
4.451699] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [539]
4.455359] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [540]
4.455446] drivers/input/serio/i8042.c: d4 -> i8042 (command) [540]
4.455510] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [540]
4.458678] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [541]
4.461604] drivers/input/serio/i8042.c: 73 <- i8042 (interrupt, 1, 12) [542]
4.461740] drivers/input/serio/i8042.c: 02 <- i8042 (interrupt, 1, 12) [542]
4.461990] drivers/input/serio/i8042.c: 50 <- i8042 (interrupt, 1, 12) [542]
4.462089] drivers/input/serio/i8042.c: d4 -> i8042 (command) [542]
4.462154] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [542]
4.462537] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [542]
4.462610] drivers/input/serio/i8042.c: d4 -> i8042 (command) [542]
4.462675] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [542]
4.468246] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [544]
4.468331] drivers/input/serio/i8042.c: d4 -> i8042 (command) [544]
4.470814] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [544]
4.473921] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [545]
4.473973] drivers/input/serio/i8042.c: d4 -> i8042 (command) [545]
4.474038] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [545]
4.477337] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [547]
4.477424] drivers/input/serio/i8042.c: d4 -> i8042 (command) [547]
4.477489] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [547]
4.480662] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [548]
4.480750] drivers/input/serio/i8042.c: d4 -> i8042 (command) [548]
4.480814] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [548]
4.484016] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [549]
4.486877] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [550]
4.489560] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [550]
4.489788] drivers/input/serio/i8042.c: 64 <- i8042 (interrupt, 1, 12) [550]
4.489873] drivers/input/serio/i8042.c: d4 -> i8042 (command) [550]
4.490832] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [550]
4.491165] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [551]
4.491214] drivers/input/serio/i8042.c: d4 -> i8042 (command) [551]
4.491279] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [551]
4.496387] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [552]
4.496473] drivers/input/serio/i8042.c: d4 -> i8042 (command) [552]
4.496537] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [552]
4.499750] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [553]
4.499836] drivers/input/serio/i8042.c: d4 -> i8042 (command) [553]
4.499901] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [553]
4.503072] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [554]
4.503158] drivers/input/serio/i8042.c: d4 -> i8042 (command) [554]
4.503222] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [554]
4.506403] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [555]
4.506489] drivers/input/serio/i8042.c: d4 -> i8042 (command) [555]
4.506553] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [555]
4.509764] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [556]
4.512702] drivers/input/serio/i8042.c: 73 <- i8042 (interrupt, 1, 12) [557]
4.515599] drivers/input/serio/i8042.c: 24 <- i8042 (interrupt, 0, 1) [558]
4.515814] drivers/input/serio/i8042.c: 02 <- i8042 (interrupt, 1, 12) [558]
4.516031] drivers/input/serio/i8042.c: 50 <- i8042 (interrupt, 1, 12) [558]
4.516115] drivers/input/serio/i8042.c: d4 -> i8042 (command) [558]
4.516180] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [558]
4.519368] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [559]
4.522257] drivers/input/serio/i8042.c: 10 <- i8042 (interrupt, 1, 12) [560]
4.522386] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [560]
4.522638] drivers/input/serio/i8042.c: 64 <- i8042 (interrupt, 1, 12) [560]
4.522726] drivers/input/serio/i8042.c: d4 -> i8042 (command) [560]
4.522791] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [560]
4.525908] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [561]
4.525991] drivers/input/serio/i8042.c: d4 -> i8042 (command) [561]
4.526056] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [561]
4.529201] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [562]
4.529287] drivers/input/serio/i8042.c: d4 -> i8042 (command) [562]
4.529352] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [562]
4.529749] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [562]
4.529822] drivers/input/serio/i8042.c: d4 -> i8042 (command) [562]
4.532306] drivers/input/serio/i8042.c: 0a -> i8042 (parameter) [562]
4.537655] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [565]
4.537718] drivers/input/serio/i8042.c: d4 -> i8042 (command) [565]
4.537783] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [565]
4.540895] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [566]
4.540983] drivers/input/serio/i8042.c: d4 -> i8042 (command) [566]
4.541048] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [566]
4.544145] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [567]
4.544231] drivers/input/serio/i8042.c: d4 -> i8042 (command) [567]
4.544296] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [567]
4.547404] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [568]
4.547490] drivers/input/serio/i8042.c: d4 -> i8042 (command) [568]
4.547554] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [568]
4.550734] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [569]
4.553645] drivers/input/serio/i8042.c: 15 <- i8042 (interrupt, 1, 12) [570]
4.556388] drivers/input/serio/i8042.c: 01 <- i8042 (interrupt, 1, 12) [570]
4.556606] drivers/input/serio/i8042.c: 0a <- i8042 (interrupt, 1, 12) [570]
4.556837] drivers/input/serio/i8042.c: d4 -> i8042 (command) [571]
4.556902] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [571]
4.560016] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [571]
4.560106] drivers/input/serio/i8042.c: d4 -> i8042 (command) [572]
4.560171] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [572]
4.563287] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [572]
4.563413] drivers/input/serio/i8042.c: d4 -> i8042 (command) [573]
4.563478] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [573]
4.566593] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [573]
4.566821] drivers/input/serio/i8042.c: d4 -> i8042 (command) [574]
4.566886] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [574]
4.570001] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [574]
4.570090] drivers/input/serio/i8042.c: d4 -> i8042 (command) [575]
4.570154] drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [575]
4.573755] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [576]
4.573839] drivers/input/serio/i8042.c: d4 -> i8042 (command) [576]
4.576587] drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [576]
4.579675] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [577]
4.579733] drivers/input/serio/i8042.c: d4 -> i8042 (command) [577]
4.579902] drivers/input/serio/i8042.c: ea -> i8042 (parameter) [577]
4.579921] drivers/input/serio/i8042.c: 25 <- i8042 (interrupt, 0, 1) [577]
4.582984] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [578]
4.590306] drivers/input/serio/i8042.c: a1 <- i8042 (interrupt, 0, 1) [579]
4.606321] drivers/input/serio/i8042.c: a4 <- i8042 (interrupt, 0, 1) [581]
4.607019] drivers/input/serio/i8042.c: d4 -> i8042 (command) [586]
4.607079] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [586]
4.607385] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [586]
4.607416] drivers/input/serio/i8042.c: d4 -> i8042 (command) [586]
4.607478] drivers/input/serio/i8042.c: 64 -> i8042 (parameter) [586]
4.614997] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [588]
4.615039] drivers/input/serio/i8042.c: d4 -> i8042 (command) [588]
4.615101] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [588]
4.615407] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [588]
4.615437] drivers/input/serio/i8042.c: d4 -> i8042 (command) [588]
4.615498] drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [588]
4.621834] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [590]
4.621874] drivers/input/serio/i8042.c: d4 -> i8042 (command) [590]
4.621935] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [590]
4.624548] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [591]
4.636453] drivers/input/serio/i8042.c: d4 -> i8042 (command) [594]
4.636515] drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [594]
4.639517] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [595]
4.639606] drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [595]
4.639944] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [595]
4.640163] drivers/input/serio/i8042.c: ab <- i8042 (interrupt, 0, 1) [595]
4.640398] drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, 0, 1) [595]
4.640450] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [595]
4.643170] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [596]
4.643213] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [596]
4.643624] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [596]
4.643676] drivers/input/serio/i8042.c: f3 -> i8042 (kbd-data) [596]
4.643996] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [596]
4.644038] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [596]
4.644305] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [597]
4.644349] drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [597]
4.644706] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [597]
4.692923] drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, 0, 1) [611]
4.696839] drivers/input/serio/i8042.c: 24 <- i8042 (interrupt, 0, 1) [611]
4.783262] PM: Resume from disk failed.
4.832311] drivers/input/serio/i8042.c: a4 <- i8042 (interrupt, 0, 1) [646]
4.873838] drivers/input/serio/i8042.c: 25 <- i8042 (interrupt, 0, 1) [666]
4.951973] drivers/input/serio/i8042.c: 21 <- i8042 (interrupt, 0, 1) [689]
4.962087] drivers/input/serio/i8042.c: 26 <- i8042 (interrupt, 0, 1) [692]
5.081834] drivers/input/serio/i8042.c: a6 <- i8042 (interrupt, 0, 1) [728]
5.085138] drivers/input/serio/i8042.c: 24 <- i8042 (interrupt, 0, 1) [728]
5.125679] drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, 0, 1) [741]
5.250987] drivers/input/serio/i8042.c: 25 <- i8042 (interrupt, 0, 1) [779]
5.288840] drivers/input/serio/i8042.c: a4 <- i8042 (interrupt, 0, 1) [790]
5.390605] drivers/input/serio/i8042.c: 24 <- i8042 (interrupt, 0, 1) [821]
5.390732] drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, 0, 1) [821]
5.410290] drivers/input/serio/i8042.c: a1 <- i8042 (interrupt, 0, 1) [827]
5.519831] drivers/input/serio/i8042.c: 25 <- i8042 (interrupt, 0, 1) [859]
5.544088] drivers/input/serio/i8042.c: a4 <- i8042 (interrupt, 0, 1) [867]
5.547392] drivers/input/serio/i8042.c: 26 <- i8042 (interrupt, 0, 1) [867]
5.659241] drivers/input/serio/i8042.c: 21 <- i8042 (interrupt, 0, 1) [901]
5.659398] drivers/input/serio/i8042.c: a6 <- i8042 (interrupt, 0, 1) [901]
5.689219] drivers/input/serio/i8042.c: 24 <- i8042 (interrupt, 0, 1) [908]
5.719043] drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, 0, 1) [916]
5.798687] drivers/input/serio/i8042.c: a1 <- i8042 (interrupt, 0, 1) [943]
5.858420] drivers/input/serio/i8042.c: a4 <- i8042 (interrupt, 0, 1) [961]
6.047709] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [1018]
6.051009] drivers/input/serio/i8042.c: 9e <- i8042 (interrupt, 0, 1) [1027]
6.051009] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [1027]
9.123604] b43-phy0 debug: Found PHY: Analog 6, Type 5, Revision 1
9.123629] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2062, Revision 2
9.145917] phy0: Selected rate control algorithm 'minstrel'
9.588484] HDA Intel 0000:00:1b.0: setting latency timer to 64
9.881730] ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc0001679c05c]
17.290291] REISERFS debug (device sda5): journal-1153: found in header: first_unflushed_offset 530, last_flushed_trans_id 121108
17.296745] REISERFS debug (device sda5): journal-1206: Starting replay from offset 520159194251794, trans_id 24
17.296753] REISERFS debug (device sda5): journal-1299: Setting newest_mount_id to 349
25.233113] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [6773]
25.358636] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [6811]
25.563296] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [6872]
25.687388] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [6910]
25.841767] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [6956]
25.956466] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [6990]
0.000000] ACPI: RSDP 000fbce0 00024 (v02 DELL )
0.000000] ACPI: XSDT 3d391e00 00064 (v01 DELL M09 27D9041D ASL 00000061)
0.000000] ACPI: FACP 3d391c9c 000F4 (v04 DELL M09 27D9041D ASL 00000061)
0.000000] ACPI: DSDT 3d392400 06857 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
0.000000] ACPI: FACS 3d3a0c00 00040
0.000000] ACPI: HPET 3d391f00 00038 (v01 DELL M09 00000001 ASL 00000061)
0.000000] ACPI: DMAR 3d3a0400 000F8 (v01 DELL M09 27D9041D ASL 00000061)
0.000000] ACPI: APIC 3d392000 00068 (v01 DELL M09 27D9041D ASL 00000047)
0.000000] ACPI: ASF! 3d391c00 00076 (v32 DELL M09 27D9041D ASL 00000061)
0.000000] ACPI: MCFG 3d391fc0 0003E (v16 DELL M09 27D9041D ASL 00000061)
0.000000] ACPI: TCPA 3d392300 00032 (v01 00000000 ASL 00000000)
0.000000] ACPI: SSDT 3d3902e7 0066C (v01 PmRef CpuPm 00003000 INTL 20050624)
0.000000] Zone PFN ranges:
0.000000] DMA 0x00000000 -> 0x00001000
0.000000] Normal 0x00001000 -> 0x000377fe
0.000000] HighMem 0x000377fe -> 0x0003d38d
0.000000] Movable zone start PFN for each node
0.000000] early_node_map[2] active PFN ranges
0.000000] 0: 0x00000000 -> 0x0000009f
0.000000] 0: 0x00000100 -> 0x0003d38d
0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 248708
0.000000] Console: colour dummy device 80x25
0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
0.000000] ... MAX_LOCK_DEPTH: 48
0.000000] ... MAX_LOCKDEP_KEYS: 8191
0.000000] ... CLASSHASH_SIZE: 4096
0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
0.000000] ... MAX_LOCKDEP_CHAINS: 32768
0.000000] ... CHAINHASH_SIZE: 16384
0.000000] memory used by lock dependency info: 3567 kB
0.000000] per task-struct memory footprint: 1152 bytes
0.000000] Fast TSC calibration using PIT
0.000000] Detected 1995.305 MHz processor.
0.003477] Mount-cache hash table entries: 512
0.073332] lockdep: fixing up alternatives.
0.167889] khelper used greatest stack depth: 6736 bytes left
0.167906] Time: 18:31:22 Date: 10/28/09
0.183926] bio: create slab <bio-0> at 0
0.233917] ACPI: SSDT 3d3a0c80 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
0.699300] highmem bounce pool size: 64 pages
0.707157] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
0.713658] ALI M7101 PMU not found.
0.727193] Console: switching to colour frame buffer device 128x48
0.745940] ACPI: SSDT 3d390953 002C3 (v01 PmRef BspIst 00003000 INTL 20050624)
0.747451] ACPI: SSDT 3d390ded 005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
0.750953] ACPI: SSDT 3d390c16 001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
0.752370] ACPI: SSDT 3d3913b3 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
0.808726] i8k: unable to get SMM BIOS version
0.831297] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
0.836900] Hangcheck: Using get_cycles().
0.858621] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
0.888873] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 9 (20090903/nsrepair-132)
0.894759] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 10 (20090903/nsrepair-132)
0.900646] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 11 (20090903/nsrepair-132)
0.906408] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 12 (20090903/nsrepair-132)
1.006024] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B
1.022192] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C
1.033201] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-D
1.652138] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
1.657946] Console: switching to colour dummy device 80x25
1.940032] async/0 used greatest stack depth: 6204 bytes left
2.033774] Console: switching to colour frame buffer device 160x50
2.114389] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
2.657074] i8042.c: Warning: Keylock active.
2.666119] Driver 'rtc_cmos' needs updating - please use bus_type methods
3.796606] Netfilter messages via NETLINK v0.30.
3.796700] nf_conntrack version 0.5.0 (15347 buckets, 61388 max)
3.797524] ctnetlink v0.93: registering with nfnetlink.
4.196617] sda1 sda2 sda3 sda4 <
4.234941] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
4.415478] sda5
4.662008] sda6 sda7
4.696955] sda8 >
4.696839] atkbd.c: Unknown key pressed (raw set 2, code 0x125 on isa0060/serio0).
4.696839] atkbd.c: Use 'setkeycodes 25 <keycode>' to make it known.
4.783405] registered taskstats version 1
4.811084] Magic number: 13:516:545
4.832325] atkbd.c: Unknown key pressed (raw set 2, code 0x124 on isa0060/serio0).
4.832327] atkbd.c: Use 'setkeycodes 24 <keycode>' to make it known.
5.081883] atkbd.c: Unknown key pressed (raw set 2, code 0x126 on isa0060/serio0).
5.085138] atkbd.c: Use 'setkeycodes 26 <keycode>' to make it known.
5.125712] atkbd.c: Unknown key pressed (raw set 2, code 0x125 on isa0060/serio0).
5.128995] atkbd.c: Use 'setkeycodes 25 <keycode>' to make it known.
5.266914] async/1 used greatest stack depth: 5944 bytes left
5.288891] atkbd.c: Unknown key pressed (raw set 2, code 0x124 on isa0060/serio0).
5.292146] atkbd.c: Use 'setkeycodes 24 <keycode>' to make it known.
5.390758] atkbd.c: Unknown key pressed (raw set 2, code 0x125 on isa0060/serio0).
5.410290] atkbd.c: Use 'setkeycodes 25 <keycode>' to make it known.
5.410290] atkbd.c: Unknown key pressed (raw set 2, code 0x121 on isa0060/serio0).
5.410290] atkbd.c: Use 'setkeycodes 21 <keycode>' to make it known.
5.544134] atkbd.c: Unknown key pressed (raw set 2, code 0x124 on isa0060/serio0).
5.545078] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
5.547392] atkbd.c: Use 'setkeycodes 24 <keycode>' to make it known.
5.659418] atkbd.c: Unknown key pressed (raw set 2, code 0x126 on isa0060/serio0).
5.680843] atkbd.c: Use 'setkeycodes 26 <keycode>' to make it known.
5.719052] atkbd.c: Unknown key pressed (raw set 2, code 0x125 on isa0060/serio0).
5.719055] atkbd.c: Use 'setkeycodes 25 <keycode>' to make it known.
5.798708] atkbd.c: Unknown key pressed (raw set 2, code 0x121 on isa0060/serio0).
5.802006] atkbd.c: Use 'setkeycodes 21 <keycode>' to make it known.
5.858461] atkbd.c: Unknown key pressed (raw set 2, code 0x124 on isa0060/serio0).
5.861732] atkbd.c: Use 'setkeycodes 24 <keycode>' to make it known.
6.047765] atkbd.c: Unknown key pressed (raw set 2, code 0x120 on isa0060/serio0).
6.051009] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
6.051009] atkbd.c: Unknown key pressed (raw set 2, code 0x11e on isa0060/serio0).
6.051009] atkbd.c: Use 'setkeycodes 1e <keycode>' to make it known.
6.051009] atkbd.c: Unknown key pressed (raw set 2, code 0x11f on isa0060/serio0).
6.051009] atkbd.c: Use 'setkeycodes 1f <keycode>' to make it known.
8.220557] cdrom_id used greatest stack depth: 5856 bytes left
17.219715] REISERFS warning (device sda5): reiserfs_fill_super: CONFIG_REISERFS_CHECK is set ON
17.230511] REISERFS warning (device sda5): reiserfs_fill_super: - it is slow mode for debugging.
17.374339] mount used greatest stack depth: 5796 bytes left
24.237922] update-mime-dat used greatest stack depth: 5772 bytes left
25.233169] atkbd.c: Unknown key pressed (raw set 2, code 0x20 on isa0060/serio0).
25.233176] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
25.358673] atkbd.c: Unknown key pressed (raw set 2, code 0x120 on isa0060/serio0).
25.358681] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
25.563353] atkbd.c: Unknown key pressed (raw set 2, code 0x20 on isa0060/serio0).
25.563360] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
25.687429] atkbd.c: Unknown key pressed (raw set 2, code 0x120 on isa0060/serio0).
25.687437] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
25.841800] atkbd.c: Unknown key pressed (raw set 2, code 0x20 on isa0060/serio0).
25.841808] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
25.956515] atkbd.c: Unknown key pressed (raw set 2, code 0x120 on isa0060/serio0).
25.956522] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
a little hesitant to force translation by default on all
although it may make sense on x86...
sources say that there are some IBM PowerPC portables
translation at all. I wouldn't be surprised if there
like that in the embedded space.
any x86 machine that wouldn't support the translated
wrote the thing, do you see any issues with forcing
I think most of the x86 boxes work in translated mode and
it is in raw is when BIOS screwed up initialization.
Dave Young <[email protected]>
/serio/i8042.c | 8 --------
changed, 8 deletions(-)
orig/drivers/input/serio/i8042.c 2009-10-13 08:57:07.000000000 +0800
drivers/input/serio/i8042.c 2009-10-27 13:15:13.000000000 +0800
+869,6 @@ static int i8042_controller_init(void)
irqrestore(&i8042_lock, flags);
the chip is configured into nontranslated mode by the BIOS, don't
enabling translating and be happy.
(~i8042_ctr & I8042_CTR_XLATE)
= true;
nontranslated mode for the kbd interface if requested by an option.
this the kbd interface becomes a simple serial in/out, like the aux
is. We don't do this by default, since it can confuse notebook

2009-10-29 03:26:36

by Dmitry Torokhov

[permalink] [raw]

Subject: Re: [PATCH][RFC] input: remove bios I8042_CTR_XLATE check to make keyboard usable

On Thu, Oct 29, 2009 at 08:33:26AM +0800, Dave Young wrote:
> On Wed, Oct 28, 2009 at 06:42:12PM +0800, Dave Young wrote:
> > On Wed, Oct 28, 2009 at 11:03:18AM +0100, Vojtech Pavlik wrote:
> > > On Tue, Oct 27, 2009 at 10:43:10PM -0700, Dmitry Torokhov wrote:
> > > > Hi Dave,
> > > >
> > > > On Tue, Oct 27, 2009 at 01:34:04PM +0800, Dave Young wrote:
> > > > >
> > > > > Pressing somekey at early booting phase cause keyboard to be not usable
> > > > > (The hardware is DELL latitude e5400):
> > >
> > > Does early booting mean while the BIOS is coming up? Does the keyboard
> > > work in GRUB then? Or is it during the early init of the Linux kernel?
> >
> > Keyboard work under lilo.
> > For the early booting I means the early init of the linux kernel
> >
> > >
> > > > > atkbd.c: Unknown key pressed (raw set 2, code 0xd3 on isa0060/serio0).
> > > > > atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
> > > > > atkbd.c: Unknown key pressed (raw set 2, code 0x1d3 on isa0060/serio0).
> > > > > atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
> > > > >
> > > > > i8042.c set i8042_direct to true when the controller init. But the result
> > > > > is keyboard not usable, The only option is press the power button to shutdown.
> > > > >
> > > > > So here remove the bios check to fix it.
> > >
> > > My question would be: Why this happens? Could it be that the probe is
> > > confused by the keypress and reads the CTR incorrectly? Or is it just
> > > that the keyboard controller is in fact in translating mode, yet the CTR
> > > indicates otherwise?
> > >
> > > A i8042.debug=1 log of the bad init would be good.
> >
> > Here it is (retrieve from syslog):
>
> Syslog redirect the debug info to another log file, sorry, post again:
>

Any chance of reconfiguring syslog so debug is captured in the same
file? It is easier to see what is happening with the rest of context
present...

--
Dmitry

2009-10-29 07:16:48

by Dave Young

[permalink] [raw]

Subject: Re: [PATCH][RFC] input: remove bios I8042_CTR_XLATE check to make keyboard usable

On Wed, Oct 28, 2009 at 08:26:33PM -0700, Dmitry Torokhov wrote:
> On Thu, Oct 29, 2009 at 08:33:26AM +0800, Dave Young wrote:
> > On Wed, Oct 28, 2009 at 06:42:12PM +0800, Dave Young wrote:
> > > On Wed, Oct 28, 2009 at 11:03:18AM +0100, Vojtech Pavlik wrote:
> > > > On Tue, Oct 27, 2009 at 10:43:10PM -0700, Dmitry Torokhov wrote:
> > > > > Hi Dave,
> > > > >
> > > > > On Tue, Oct 27, 2009 at 01:34:04PM +0800, Dave Young wrote:
> > > > > >
> > > > > > Pressing somekey at early booting phase cause keyboard to be not usable
> > > > > > (The hardware is DELL latitude e5400):
> > > >
> > > > Does early booting mean while the BIOS is coming up? Does the keyboard
> > > > work in GRUB then? Or is it during the early init of the Linux kernel?
> > >
> > > Keyboard work under lilo.
> > > For the early booting I means the early init of the linux kernel
> > >
> > > >
> > > > > > atkbd.c: Unknown key pressed (raw set 2, code 0xd3 on isa0060/serio0).
> > > > > > atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
> > > > > > atkbd.c: Unknown key pressed (raw set 2, code 0x1d3 on isa0060/serio0).
> > > > > > atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
> > > > > >
> > > > > > i8042.c set i8042_direct to true when the controller init. But the result
> > > > > > is keyboard not usable, The only option is press the power button to shutdown.
> > > > > >
> > > > > > So here remove the bios check to fix it.
> > > >
> > > > My question would be: Why this happens? Could it be that the probe is
> > > > confused by the keypress and reads the CTR incorrectly? Or is it just
> > > > that the keyboard controller is in fact in translating mode, yet the CTR
> > > > indicates otherwise?
> > > >
> > > > A i8042.debug=1 log of the bad init would be good.
> > >
> > > Here it is (retrieve from syslog):
> >
> > Syslog redirect the debug info to another log file, sorry, post again:
> >
>
> Any chance of reconfiguring syslog so debug is captured in the same
> file? It is easier to see what is happening with the rest of context
> present...

Sure, here it is:

Oct 29 15:08:32 darkstar kernel: [ 1.769328] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Oct 29 15:08:32 darkstar kernel: [ 1.775105] Console: switching to colour dummy device 80x25
Oct 29 15:08:32 darkstar kernel: [ 1.836980] [drm] LVDS-8: set mode 1280x800 c
Oct 29 15:08:32 darkstar kernel: [ 2.067531] async/0 used greatest stack depth: 6184 bytes left
Oct 29 15:08:32 darkstar kernel: [ 2.228157] Console: switching to colour frame buffer device 160x50
Oct 29 15:08:32 darkstar kernel: [ 2.260999] fb0: inteldrmfb frame buffer device
Oct 29 15:08:32 darkstar kernel: [ 2.261001] registered panic notifier
Oct 29 15:08:32 darkstar kernel: [ 2.309878] acpi device:3b: registered as cooling_device2
Oct 29 15:08:32 darkstar kernel: [ 2.311325] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input3
Oct 29 15:08:32 darkstar kernel: [ 2.311794] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
Oct 29 15:08:32 darkstar kernel: [ 2.312212] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
Oct 29 15:08:32 darkstar kernel: [ 2.312910] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input4
Oct 29 15:08:32 darkstar kernel: [ 2.313337] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
Oct 29 15:08:32 darkstar kernel: [ 2.313768] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Oct 29 15:08:32 darkstar kernel: [ 2.314252] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 29 15:08:32 darkstar kernel: [ 2.321153] brd: module loaded
Oct 29 15:08:32 darkstar kernel: [ 2.323814] loop: module loaded
Oct 29 15:08:32 darkstar kernel: [ 2.324372] Loading iSCSI transport class v2.0-870.
Oct 29 15:08:32 darkstar kernel: [ 2.325679] ata_piix 0000:00:1f.2: version 2.13
Oct 29 15:08:32 darkstar kernel: [ 2.325706] ata_piix 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Oct 29 15:08:32 darkstar kernel: [ 2.326042] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
Oct 29 15:08:32 darkstar kernel: [ 2.326420] ata_piix 0000:00:1f.2: setting latency timer to 64
Oct 29 15:08:32 darkstar kernel: [ 2.326548] scsi0 : ata_piix
Oct 29 15:08:32 darkstar kernel: [ 2.327157] scsi1 : ata_piix
Oct 29 15:08:32 darkstar kernel: [ 2.329192] ata1: SATA max UDMA/133 cmd 0x6e70 ctl 0x6e78 bmdma 0x6ea0 irq 19
Oct 29 15:08:32 darkstar kernel: [ 2.329525] ata2: SATA max UDMA/133 cmd 0x6e80 ctl 0x6e88 bmdma 0x6ea8 irq 19
Oct 29 15:08:32 darkstar kernel: [ 2.329918] ata_piix 0000:00:1f.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Oct 29 15:08:32 darkstar kernel: [ 2.330280] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Oct 29 15:08:32 darkstar kernel: [ 2.483399] ata_piix 0000:00:1f.5: setting latency timer to 64
Oct 29 15:08:32 darkstar kernel: [ 2.483472] scsi2 : ata_piix
Oct 29 15:08:32 darkstar kernel: [ 2.483889] scsi3 : ata_piix
Oct 29 15:08:32 darkstar kernel: [ 2.494799] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 19
Oct 29 15:08:32 darkstar kernel: [ 2.505374] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 19
Oct 29 15:08:32 darkstar kernel: [ 2.517131] tg3.c:v3.102 (September 1, 2009)
Oct 29 15:08:32 darkstar kernel: [ 2.527407] tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 29 15:08:32 darkstar kernel: [ 2.537850] tg3 0000:09:00.0: setting latency timer to 64
Oct 29 15:08:32 darkstar kernel: [ 2.556144] eth0: Tigon3 [partno(BCM95756m) rev a200] (PCI Express) MAC address 00:21:9b:f5:60:0f
Oct 29 15:08:32 darkstar kernel: [ 2.566888] eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1])
Oct 29 15:08:32 darkstar kernel: [ 2.577614] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
Oct 29 15:08:32 darkstar kernel: [ 2.588351] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Oct 29 15:08:32 darkstar kernel: [ 2.599287] sky2 driver version 1.25
Oct 29 15:08:32 darkstar kernel: [ 2.610019] PPP generic driver version 2.4.2
Oct 29 15:08:32 darkstar kernel: [ 2.620820] PPP Deflate Compression module registered
Oct 29 15:08:32 darkstar kernel: [ 2.631273] PPP BSD Compression module registered
Oct 29 15:08:32 darkstar kernel: [ 2.642068] PPP MPPE Compression module registered
Oct 29 15:08:32 darkstar kernel: [ 2.652346] NET: Registered protocol family 24
Oct 29 15:08:32 darkstar kernel: [ 2.662740] PPPoL2TP kernel driver, V1.0
Oct 29 15:08:32 darkstar kernel: [ 2.673215] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct 29 15:08:32 darkstar kernel: [ 2.684287] CSLIP: code copyright 1989 Regents of the University of California.
Oct 29 15:08:32 darkstar kernel: [ 2.695418] SLIP linefill/keepalive option.
Oct 29 15:08:32 darkstar kernel: [ 2.706655] console [netcon0] enabled
Oct 29 15:08:32 darkstar kernel: [ 2.717759] netconsole: network logging started
Oct 29 15:08:32 darkstar kernel: [ 2.729216] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 29 15:08:32 darkstar kernel: [ 2.740669] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Oct 29 15:08:32 darkstar kernel: [ 2.752135] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Oct 29 15:08:32 darkstar kernel: [ 2.752141] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 2.763541] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Oct 29 15:08:32 darkstar kernel: [ 2.774930] ehci_hcd 0000:00:1a.7: debug port 1
Oct 29 15:08:32 darkstar kernel: [ 2.789956] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
Oct 29 15:08:32 darkstar kernel: [ 2.789984] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
Oct 29 15:08:32 darkstar kernel: [ 2.803419] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 29 15:08:32 darkstar kernel: [ 2.805095] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Oct 29 15:08:32 darkstar kernel: [ 2.838801] ata4: SATA link down (SStatus 4 SControl 300)
Oct 29 15:08:32 darkstar kernel: [ 2.850203] ata3: SATA link down (SStatus 0 SControl 300)
Oct 29 15:08:32 darkstar kernel: [ 2.850605] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Oct 29 15:08:32 darkstar kernel: [ 2.850787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Oct 29 15:08:32 darkstar kernel: [ 2.850790] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 29 15:08:32 darkstar kernel: [ 2.850793] usb usb1: Product: EHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 2.850795] usb usb1: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 ehci_hcd
Oct 29 15:08:32 darkstar kernel: [ 2.850797] usb usb1: SerialNumber: 0000:00:1a.7
Oct 29 15:08:32 darkstar kernel: [ 2.851349] usb usb1: configuration #1 chosen from 1 choice
Oct 29 15:08:32 darkstar kernel: [ 2.851747] hub 1-0:1.0: USB hub found
Oct 29 15:08:32 darkstar kernel: [ 2.851792] hub 1-0:1.0: 6 ports detected
Oct 29 15:08:32 darkstar kernel: [ 2.852198] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Oct 29 15:08:32 darkstar kernel: [ 2.852216] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Oct 29 15:08:32 darkstar kernel: [ 2.852220] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 2.852233] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Oct 29 15:08:32 darkstar kernel: [ 2.852275] ehci_hcd 0000:00:1d.7: debug port 1
Oct 29 15:08:32 darkstar kernel: [ 2.856179] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Oct 29 15:08:32 darkstar kernel: [ 2.856205] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
Oct 29 15:08:32 darkstar kernel: [ 3.000521] ata1.00: ATA-8: ST9160310AS, DE04, max UDMA/133
Oct 29 15:08:32 darkstar kernel: [ 3.000905] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633A, D500, max UDMA/100
Oct 29 15:08:32 darkstar kernel: [ 3.000919] ata2.00: applying bridge limits
Oct 29 15:08:32 darkstar kernel: [ 3.030396] ata2.00: configured for UDMA/100
Oct 29 15:08:32 darkstar kernel: [ 3.040423] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Oct 29 15:08:32 darkstar kernel: [ 3.040485] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
Oct 29 15:08:32 darkstar kernel: [ 3.060761] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Oct 29 15:08:32 darkstar kernel: [ 3.071186] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 29 15:08:32 darkstar kernel: [ 3.071212] ata1.00: configured for UDMA/133
Oct 29 15:08:32 darkstar kernel: [ 3.071835] scsi 0:0:0:0: Direct-Access ATA ST9160310AS DE04 PQ: 0 ANSI: 5
Oct 29 15:08:32 darkstar kernel: [ 3.073532] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 29 15:08:32 darkstar kernel: [ 3.074208] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Oct 29 15:08:32 darkstar kernel: [ 3.074331] sd 0:0:0:0: [sda] Write Protect is off
Oct 29 15:08:32 darkstar kernel: [ 3.074334] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 29 15:08:32 darkstar kernel: [ 3.074397] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 29 15:08:32 darkstar kernel: [ 3.142477] usb usb2: Product: EHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 3.152723] usb usb2: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 ehci_hcd
Oct 29 15:08:32 darkstar kernel: [ 3.163136] usb usb2: SerialNumber: 0000:00:1d.7
Oct 29 15:08:32 darkstar kernel: [ 3.173957] usb usb2: configuration #1 chosen from 1 choice
Oct 29 15:08:32 darkstar kernel: [ 3.184694] hub 2-0:1.0: USB hub found
Oct 29 15:08:32 darkstar kernel: [ 3.186168] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633A D500 PQ: 0 ANSI: 5
Oct 29 15:08:32 darkstar kernel: [ 3.205673] sda:
Oct 29 15:08:32 darkstar kernel: [ 3.205887] hub 2-0:1.0: 6 ports detected
Oct 29 15:08:32 darkstar kernel: [ 3.226536] uhci_hcd: USB Universal Host Controller Interface driver
Oct 29 15:08:32 darkstar kernel: [ 3.236805] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Oct 29 15:08:32 darkstar kernel: [ 3.247146] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Oct 29 15:08:32 darkstar kernel: [ 3.247152] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 3.257722] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Oct 29 15:08:32 darkstar kernel: [ 3.268019] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
Oct 29 15:08:32 darkstar kernel: [ 3.271348] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Oct 29 15:08:32 darkstar kernel: [ 3.271352] Uniform CD-ROM driver Revision: 3.20
Oct 29 15:08:32 darkstar kernel: [ 3.271935] sr 1:0:0:0: Attached scsi CD-ROM sr0
Oct 29 15:08:32 darkstar kernel: [ 3.272214] sr 1:0:0:0: Attached scsi generic sg1 type 5
Oct 29 15:08:32 darkstar kernel: [ 3.309009] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Oct 29 15:08:32 darkstar kernel: [ 3.319485] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 29 15:08:32 darkstar kernel: [ 3.329938] usb usb3: Product: UHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 3.340494] usb usb3: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 uhci_hcd
Oct 29 15:08:32 darkstar kernel: [ 3.351173] usb usb3: SerialNumber: 0000:00:1a.0
Oct 29 15:08:32 darkstar kernel: [ 3.362274] usb usb3: configuration #1 chosen from 1 choice
Oct 29 15:08:32 darkstar kernel: [ 3.373209] hub 3-0:1.0: USB hub found
Oct 29 15:08:32 darkstar kernel: [ 3.383878] hub 3-0:1.0: 2 ports detected
Oct 29 15:08:32 darkstar kernel: [ 3.394578] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Oct 29 15:08:32 darkstar kernel: [ 3.405325] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Oct 29 15:08:32 darkstar kernel: [ 3.405330] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 3.415917] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Oct 29 15:08:32 darkstar kernel: [ 3.426596] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
Oct 29 15:08:32 darkstar kernel: [ 3.437249] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Oct 29 15:08:32 darkstar kernel: [ 3.447963] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 29 15:08:32 darkstar kernel: [ 3.458896] usb usb4: Product: UHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 3.469684] usb usb4: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 uhci_hcd
Oct 29 15:08:32 darkstar kernel: [ 3.480609] usb usb4: SerialNumber: 0000:00:1a.1
Oct 29 15:08:32 darkstar kernel: [ 3.491487] sda1 sda2 sda3 sda4 <
Oct 29 15:08:32 darkstar kernel: [ 3.491970] usb usb4: configuration #1 chosen from 1 choice
Oct 29 15:08:32 darkstar kernel: [ 3.513750] hub 4-0:1.0: USB hub found
Oct 29 15:08:32 darkstar kernel: [ 3.524608] hub 4-0:1.0: 2 ports detected
Oct 29 15:08:32 darkstar kernel: [ 3.535457] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Oct 29 15:08:32 darkstar kernel: [ 3.546368] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Oct 29 15:08:32 darkstar kernel: [ 3.546373] uhci_hcd 0000:00:1a.2: UHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 3.557269] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Oct 29 15:08:32 darkstar kernel: [ 3.568246] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
Oct 29 15:08:32 darkstar kernel: [ 3.579151] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Oct 29 15:08:32 darkstar kernel: [ 3.590038] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 29 15:08:32 darkstar kernel: [ 3.601062] usb usb5: Product: UHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 3.611827] usb usb5: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 uhci_hcd
Oct 29 15:08:32 darkstar kernel: [ 3.622664] usb usb5: SerialNumber: 0000:00:1a.2
Oct 29 15:08:32 darkstar kernel: [ 3.633580] usb usb5: configuration #1 chosen from 1 choice
Oct 29 15:08:32 darkstar kernel: [ 3.644466] hub 5-0:1.0: USB hub found
Oct 29 15:08:32 darkstar kernel: [ 3.655057] hub 5-0:1.0: 2 ports detected
Oct 29 15:08:32 darkstar kernel: [ 3.665643] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Oct 29 15:08:32 darkstar kernel: [ 3.676188] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Oct 29 15:08:32 darkstar kernel: [ 3.676193] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 3.686592] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Oct 29 15:08:32 darkstar kernel: [ 3.697039] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
Oct 29 15:08:32 darkstar kernel: [ 3.707478] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Oct 29 15:08:32 darkstar kernel: [ 3.717980] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 29 15:08:32 darkstar kernel: [ 3.728432] usb usb6: Product: UHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 3.738725] usb usb6: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 uhci_hcd
Oct 29 15:08:32 darkstar kernel: [ 3.749227] usb usb6: SerialNumber: 0000:00:1d.0
Oct 29 15:08:32 darkstar kernel: [ 3.759744] sda5
Oct 29 15:08:32 darkstar kernel: [ 3.759936] usb usb6: configuration #1 chosen from 1 choice
Oct 29 15:08:32 darkstar kernel: [ 3.780577] hub 6-0:1.0: USB hub found
Oct 29 15:08:32 darkstar kernel: [ 3.790864] hub 6-0:1.0: 2 ports detected
Oct 29 15:08:32 darkstar kernel: [ 3.801175] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Oct 29 15:08:32 darkstar kernel: [ 3.811517] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Oct 29 15:08:32 darkstar kernel: [ 3.811523] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 3.821680] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Oct 29 15:08:32 darkstar kernel: [ 3.831928] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
Oct 29 15:08:32 darkstar kernel: [ 3.842070] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Oct 29 15:08:32 darkstar kernel: [ 3.852336] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 29 15:08:32 darkstar kernel: [ 3.862506] usb usb7: Product: UHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 3.872556] usb usb7: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 uhci_hcd
Oct 29 15:08:32 darkstar kernel: [ 3.882704] usb usb7: SerialNumber: 0000:00:1d.1
Oct 29 15:08:32 darkstar kernel: [ 3.893017] usb usb7: configuration #1 chosen from 1 choice
Oct 29 15:08:32 darkstar kernel: [ 3.903360] hub 7-0:1.0: USB hub found
Oct 29 15:08:32 darkstar kernel: [ 3.913514] hub 7-0:1.0: 2 ports detected
Oct 29 15:08:32 darkstar kernel: [ 3.923668] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Oct 29 15:08:32 darkstar kernel: [ 3.933900] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Oct 29 15:08:32 darkstar kernel: [ 3.933906] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 3.944027] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Oct 29 15:08:32 darkstar kernel: [ 3.954264] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
Oct 29 15:08:32 darkstar kernel: [ 3.964387] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
Oct 29 15:08:32 darkstar kernel: [ 3.974574] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 29 15:08:32 darkstar kernel: [ 3.984724] usb usb8: Product: UHCI Host Controller
Oct 29 15:08:32 darkstar kernel: [ 3.994775] usb usb8: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 uhci_hcd
Oct 29 15:08:32 darkstar kernel: [ 4.004946] usb usb8: SerialNumber: 0000:00:1d.2
Oct 29 15:08:32 darkstar kernel: [ 4.015031] sda6
Oct 29 15:08:32 darkstar kernel: [ 4.015363] usb usb8: configuration #1 chosen from 1 choice
Oct 29 15:08:32 darkstar kernel: [ 4.035532] hub 8-0:1.0: USB hub found
Oct 29 15:08:32 darkstar kernel: [ 4.045674] hub 8-0:1.0: 2 ports detected
Oct 29 15:08:32 darkstar kernel: [ 4.055871] Initializing USB Mass Storage driver...
Oct 29 15:08:32 darkstar kernel: [ 4.065990] usbcore: registered new interface driver usb-storage
Oct 29 15:08:32 darkstar kernel: [ 4.076095] USB Mass Storage support registered.
Oct 29 15:08:32 darkstar kernel: [ 4.086460] usbcore: registered new interface driver libusual
Oct 29 15:08:32 darkstar kernel: [ 4.096753] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Oct 29 15:08:32 darkstar kernel: [ 4.107118] drivers/input/serio/i8042.c: 25 <- i8042 (flush, kbd) [3]
Oct 29 15:08:32 darkstar kernel: [ 4.107251] drivers/input/serio/i8042.c: 20 -> i8042 (command) [3]
Oct 29 15:08:32 darkstar kernel: [ 4.107260] drivers/input/serio/i8042.c: 1f <- i8042 (return) [3]
Oct 29 15:08:32 darkstar kernel: [ 4.107265] i8042.c: Warning: Keylock active.
Oct 29 15:08:32 darkstar kernel: [ 4.117378] drivers/input/serio/i8042.c: 60 -> i8042 (command) [6]
Oct 29 15:08:32 darkstar kernel: [ 4.117437] drivers/input/serio/i8042.c: 1e -> i8042 (parameter) [6]
Oct 29 15:08:32 darkstar kernel: [ 4.117497] drivers/input/serio/i8042.c: 65 <- i8042 (flush, kbd) [6]
Oct 29 15:08:32 darkstar kernel: [ 4.117557] drivers/input/serio/i8042.c: d3 -> i8042 (command) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.117668] drivers/input/serio/i8042.c: 5a -> i8042 (parameter) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.117992] drivers/input/serio/i8042.c: 5a <- i8042 (return) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.118003] drivers/input/serio/i8042.c: a7 -> i8042 (command) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.118061] drivers/input/serio/i8042.c: 20 -> i8042 (command) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.118383] drivers/input/serio/i8042.c: 3e <- i8042 (return) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.118388] drivers/input/serio/i8042.c: a8 -> i8042 (command) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.118445] drivers/input/serio/i8042.c: 20 -> i8042 (command) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.118768] drivers/input/serio/i8042.c: 1e <- i8042 (return) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.118773] drivers/input/serio/i8042.c: 60 -> i8042 (command) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.118832] drivers/input/serio/i8042.c: 3c -> i8042 (parameter) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.118998] drivers/input/serio/i8042.c: d3 -> i8042 (command) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.119110] drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.119434] drivers/input/serio/i8042.c: f0 <- i8042 (return) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.119439] drivers/input/serio/i8042.c: d3 -> i8042 (command) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.119498] drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.119770] drivers/input/serio/i8042.c: 56 <- i8042 (return) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.119775] drivers/input/serio/i8042.c: d3 -> i8042 (command) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.119834] drivers/input/serio/i8042.c: a4 -> i8042 (parameter) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.120159] drivers/input/serio/i8042.c: a4 <- i8042 (return) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.120194] drivers/input/serio/i8042.c: 60 -> i8042 (command) [7]
Oct 29 15:08:32 darkstar kernel: [ 4.122915] drivers/input/serio/i8042.c: 1e -> i8042 (parameter) [8]
Oct 29 15:08:32 darkstar kernel: [ 4.123043] drivers/input/serio/i8042.c: 60 -> i8042 (command) [8]
Oct 29 15:08:32 darkstar kernel: [ 4.123154] drivers/input/serio/i8042.c: 0f -> i8042 (parameter) [8]
Oct 29 15:08:32 darkstar kernel: [ 4.123160] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 29 15:08:32 darkstar kernel: [ 4.123464] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [8]
Oct 29 15:08:32 darkstar kernel: [ 4.133281] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [11]
Oct 29 15:08:32 darkstar kernel: [ 4.133325] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 29 15:08:32 darkstar kernel: [ 4.133411] drivers/input/serio/i8042.c: 1e <- i8042 (interrupt, 0, 1) [11]
Oct 29 15:08:32 darkstar kernel: [ 4.143256] drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, 0, 1) [14]
Oct 29 15:08:32 darkstar kernel: [ 4.143385] drivers/input/serio/i8042.c: 26 <- i8042 (interrupt, 0, 1) [14]
Oct 29 15:08:32 darkstar kernel: [ 4.143527] drivers/input/serio/i8042.c: 25 <- i8042 (interrupt, 0, 1) [14]
Oct 29 15:08:32 darkstar kernel: [ 4.143662] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [14]
Oct 29 15:08:32 darkstar kernel: [ 4.143670] mice: PS/2 mouse device common for all mice
Oct 29 15:08:32 darkstar kernel: [ 4.153624] drivers/input/serio/i8042.c: a6 <- i8042 (interrupt, 0, 1) [17]
Oct 29 15:08:32 darkstar kernel: [ 4.153754] drivers/input/serio/i8042.c: 21 <- i8042 (interrupt, 0, 1) [17]
Oct 29 15:08:32 darkstar kernel: [ 4.153937] drivers/input/serio/i8042.c: 24 <- i8042 (interrupt, 0, 1) [17]
Oct 29 15:08:32 darkstar kernel: [ 4.154696] drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [18]
Oct 29 15:08:32 darkstar kernel: [ 4.154826] Driver 'rtc_cmos' needs updating - please use bus_type methods
Oct 29 15:08:32 darkstar kernel: [ 4.154947] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [18]
Oct 29 15:08:32 darkstar kernel: [ 4.164935] drivers/input/serio/i8042.c: ab <- i8042 (interrupt, 0, 1) [21]
Oct 29 15:08:32 darkstar kernel: [ 4.165054] rtc_cmos 00:03: RTC can wake from S4
Oct 29 15:08:32 darkstar kernel: [ 4.165068] drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, 0, 1) [21]
Oct 29 15:08:32 darkstar kernel: [ 4.165086] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [21]
Oct 29 15:08:32 darkstar kernel: [ 4.175208] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [24]
Oct 29 15:08:32 darkstar kernel: [ 4.175226] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [24]
Oct 29 15:08:32 darkstar kernel: [ 4.175345] drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, 0, 1) [24]
Oct 29 15:08:32 darkstar kernel: [ 4.175471] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Oct 29 15:08:32 darkstar kernel: [ 4.185639] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [27]
Oct 29 15:08:32 darkstar kernel: [ 4.185661] drivers/input/serio/i8042.c: f3 -> i8042 (kbd-data) [27]
Oct 29 15:08:32 darkstar kernel: [ 4.185698] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Oct 29 15:08:32 darkstar kernel: [ 4.185957] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [27]
Oct 29 15:08:32 darkstar kernel: [ 4.185972] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [27]
Oct 29 15:08:32 darkstar kernel: [ 4.195933] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [30]
Oct 29 15:08:32 darkstar kernel: [ 4.195955] drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [30]
Oct 29 15:08:32 darkstar kernel: [ 4.196035] i2c /dev entries driver
Oct 29 15:08:32 darkstar kernel: [ 4.197044] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [30]
Oct 29 15:08:32 darkstar kernel: [ 4.197497] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Oct 29 15:08:32 darkstar kernel: [ 4.197766] drivers/input/serio/i8042.c: d4 -> i8042 (command) [31]
Oct 29 15:08:32 darkstar kernel: [ 4.197825] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [31]
Oct 29 15:08:32 darkstar kernel: [ 4.216640] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [36]
Oct 29 15:08:32 darkstar kernel: [ 4.216785] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [36]
Oct 29 15:08:32 darkstar kernel: [ 4.216818] drivers/input/serio/i8042.c: 60 -> i8042 (command) [36]
Oct 29 15:08:32 darkstar kernel: [ 4.216878] drivers/input/serio/i8042.c: 0d -> i8042 (parameter) [36]
Oct 29 15:08:32 darkstar kernel: [ 4.216988] drivers/input/serio/i8042.c: 60 -> i8042 (command) [36]
Oct 29 15:08:32 darkstar kernel: [ 4.217099] drivers/input/serio/i8042.c: 0f -> i8042 (parameter) [36]
Oct 29 15:08:32 darkstar kernel: [ 4.217241] drivers/input/serio/i8042.c: d4 -> i8042 (command) [36]
Oct 29 15:08:32 darkstar kernel: [ 4.217353] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [36]
Oct 29 15:08:32 darkstar kernel: [ 4.218739] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 29 15:08:32 darkstar kernel: [ 4.220373] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [37]
Oct 29 15:08:32 darkstar kernel: [ 4.229267] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [40]
Oct 29 15:08:32 darkstar kernel: [ 4.229290] drivers/input/serio/i8042.c: d4 -> i8042 (command) [40]
Oct 29 15:08:32 darkstar kernel: [ 4.229455] drivers/input/serio/i8042.c: f6 -> i8042 (parameter) [40]
Oct 29 15:08:32 darkstar kernel: [ 4.229467] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [40]
Oct 29 15:08:32 darkstar kernel: [ 4.229570] atkbd.c: Unknown key pressed (raw set 2, code 0x20 on isa0060/serio0).
Oct 29 15:08:32 darkstar kernel: [ 4.232057] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [40]
Oct 29 15:08:32 darkstar kernel: [ 4.232608] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
Oct 29 15:08:32 darkstar kernel: [ 4.250787] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [47]
Oct 29 15:08:32 darkstar kernel: [ 4.250794] atkbd.c: Unknown key pressed (raw set 2, code 0x1f on isa0060/serio0).
Oct 29 15:08:32 darkstar kernel: [ 4.254107] atkbd.c: Use 'setkeycodes 1f <keycode>' to make it known.
Oct 29 15:08:32 darkstar kernel: [ 4.272408] sda7
Oct 29 15:08:32 darkstar kernel: [ 4.272598] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04
Oct 29 15:08:32 darkstar kernel: [ 4.272602] async/1 used greatest stack depth: 6128 bytes left
Oct 29 15:08:32 darkstar kernel: [ 4.272704] drivers/input/serio/i8042.c: d4 -> i8042 (command) [53]
Oct 29 15:08:32 darkstar kernel: [ 4.272763] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [53]
Oct 29 15:08:32 darkstar kernel: [ 4.273045] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [53]
Oct 29 15:08:32 darkstar kernel: [ 4.273062] drivers/input/serio/i8042.c: d4 -> i8042 (command) [53]
Oct 29 15:08:32 darkstar kernel: [ 4.273121] drivers/input/serio/i8042.c: 0a -> i8042 (parameter) [53]
Oct 29 15:08:32 darkstar kernel: [ 4.304310] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [63]
Oct 29 15:08:32 darkstar kernel: [ 4.304334] drivers/input/serio/i8042.c: d4 -> i8042 (command) [63]
Oct 29 15:08:32 darkstar kernel: [ 4.304393] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [63]
Oct 29 15:08:32 darkstar kernel: [ 4.304575] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
Oct 29 15:08:32 darkstar kernel: [ 4.304733] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [63]
Oct 29 15:08:32 darkstar kernel: [ 4.304749] drivers/input/serio/i8042.c: d4 -> i8042 (command) [63]
Oct 29 15:08:32 darkstar kernel: [ 4.304807] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [63]
Oct 29 15:08:32 darkstar kernel: [ 4.315406] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [66]
Oct 29 15:08:32 darkstar kernel: [ 4.315429] drivers/input/serio/i8042.c: d4 -> i8042 (command) [66]
Oct 29 15:08:32 darkstar kernel: [ 4.315540] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [66]
Oct 29 15:08:32 darkstar kernel: [ 4.315726] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
Oct 29 15:08:32 darkstar kernel: [ 4.315835] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [66]
Oct 29 15:08:32 darkstar kernel: [ 4.315850] drivers/input/serio/i8042.c: d4 -> i8042 (command) [66]
Oct 29 15:08:32 darkstar kernel: [ 4.315909] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [66]
Oct 29 15:08:32 darkstar kernel: [ 4.326568] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [69]
Oct 29 15:08:32 darkstar kernel: [ 4.326591] drivers/input/serio/i8042.c: d4 -> i8042 (command) [69]
Oct 29 15:08:32 darkstar kernel: [ 4.326755] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [69]
Oct 29 15:08:32 darkstar kernel: [ 4.326767] drivers/input/serio/i8042.c: 25 <- i8042 (interrupt, 0, 1) [69]
Oct 29 15:08:32 darkstar kernel: [ 4.326783] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Oct 29 15:08:32 darkstar kernel: [ 4.337663] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [73]
Oct 29 15:08:32 darkstar kernel: [ 4.337682] drivers/input/serio/i8042.c: d4 -> i8042 (command) [73]
Oct 29 15:08:32 darkstar kernel: [ 4.337692] iTCO_vendor_support: vendor-support=0
Oct 29 15:08:32 darkstar kernel: [ 4.337846] drivers/input/serio/i8042.c: 3c -> i8042 (parameter) [73]
Oct 29 15:08:32 darkstar kernel: [ 4.337858] drivers/input/serio/i8042.c: a4 <- i8042 (interrupt, 0, 1) [73]
Oct 29 15:08:32 darkstar kernel: [ 4.337871] atkbd.c: Unknown key pressed (raw set 2, code 0x124 on isa0060/serio0).
Oct 29 15:08:32 darkstar kernel: [ 4.337874] atkbd.c: Use 'setkeycodes 24 <keycode>' to make it known.
Oct 29 15:08:32 darkstar kernel: [ 4.370530] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [82]
Oct 29 15:08:32 darkstar kernel: [ 4.370552] drivers/input/serio/i8042.c: d4 -> i8042 (command) [82]
Oct 29 15:08:32 darkstar kernel: [ 4.370717] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [82]
Oct 29 15:08:32 darkstar kernel: [ 4.370729] drivers/input/serio/i8042.c: a1 <- i8042 (interrupt, 0, 1) [82]
Oct 29 15:08:32 darkstar kernel: [ 4.370743] atkbd.c: Unknown key pressed (raw set 2, code 0x121 on isa0060/serio0).
Oct 29 15:08:32 darkstar kernel: [ 4.371011] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [82]
Oct 29 15:08:32 darkstar kernel: [ 4.371197] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
Oct 29 15:08:32 darkstar kernel: [ 4.371429] device-mapper: dm-log-userspace: version 1.0.0 loaded
Oct 29 15:08:32 darkstar kernel: [ 4.372402] cpuidle: using governor ladder
Oct 29 15:08:32 darkstar kernel: [ 4.373871] atkbd.c: Use 'setkeycodes 21 <keycode>' to make it known.
Oct 29 15:08:32 darkstar kernel: [ 4.426476] drivers/input/serio/i8042.c: 26 <- i8042 (interrupt, 0, 1) [99]
Oct 29 15:08:32 darkstar kernel: [ 4.426518] drivers/input/serio/i8042.c: d4 -> i8042 (command) [99]
Oct 29 15:08:32 darkstar kernel: [ 4.428191] cpuidle: using governor menu
Oct 29 15:08:32 darkstar kernel: [ 4.429084] drivers/input/serio/i8042.c: 28 -> i8042 (parameter) [99]
Oct 29 15:08:32 darkstar kernel: [ 4.434432] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [100]
Oct 29 15:08:32 darkstar kernel: [ 4.434478] drivers/input/serio/i8042.c: d4 -> i8042 (command) [102]
Oct 29 15:08:32 darkstar kernel: [ 4.434641] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [102]
Oct 29 15:08:32 darkstar kernel: [ 4.439332] drivers/input/serio/i8042.c: a6 <- i8042 (interrupt, 0, 1) [102]
Oct 29 15:08:32 darkstar kernel: [ 4.439347] atkbd.c: Unknown key pressed (raw set 2, code 0x126 on isa0060/serio0).
Oct 29 15:08:32 darkstar kernel: [ 4.439349] atkbd.c: Use 'setkeycodes 26 <keycode>' to make it known.
Oct 29 15:08:32 darkstar kernel: [ 4.439654] sdhci: Secure Digital Host Controller Interface driver
Oct 29 15:08:32 darkstar kernel: [ 4.439656] sdhci: Copyright(c) Pierre Ossman
Oct 29 15:08:32 darkstar kernel: [ 4.439707] sdhci-pci 0000:02:01.2: SDHCI controller found [1180:0822] (rev 21)
Oct 29 15:08:32 darkstar kernel: [ 4.439735] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 29 15:08:32 darkstar kernel: [ 4.442116] Registered led device: mmc0::
Oct 29 15:08:32 darkstar kernel: [ 4.443389] mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA
Oct 29 15:08:32 darkstar kernel: [ 4.443641] wbsd: Winbond W83L51xD SD/MMC card interface driver
Oct 29 15:08:32 darkstar kernel: [ 4.443644] wbsd: Copyright(c) Pierre Ossman
Oct 29 15:08:32 darkstar kernel: [ 4.444232] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Oct 29 15:08:32 darkstar kernel: [ 4.447550] usbcore: registered new interface driver hiddev
Oct 29 15:08:32 darkstar kernel: [ 4.447680] usbcore: registered new interface driver usbhid
Oct 29 15:08:32 darkstar kernel: [ 4.447685] usbhid: v2.6:USB HID core driver
Oct 29 15:08:32 darkstar kernel: [ 4.447900] Advanced Linux Sound Architecture Driver Version 1.0.21.
Oct 29 15:08:32 darkstar kernel: [ 4.447902] ALSA device list:
Oct 29 15:08:32 darkstar kernel: [ 4.447904] No soundcards found.
Oct 29 15:08:32 darkstar kernel: [ 4.447907] Netfilter messages via NETLINK v0.30.
Oct 29 15:08:32 darkstar kernel: [ 4.447987] nf_conntrack version 0.5.0 (15347 buckets, 61388 max)
Oct 29 15:08:32 darkstar kernel: [ 4.448841] ctnetlink v0.93: registering with nfnetlink.
Oct 29 15:08:32 darkstar kernel: [ 4.450911] ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 29 15:08:32 darkstar kernel: [ 4.450992] TCP cubic registered
Oct 29 15:08:32 darkstar kernel: [ 4.450997] NET: Registered protocol family 17
Oct 29 15:08:32 darkstar kernel: [ 4.451028] lib80211: common routines for IEEE802.11 drivers
Oct 29 15:08:32 darkstar kernel: [ 4.451041] lib80211_crypt: registered algorithm 'NULL'
Oct 29 15:08:32 darkstar kernel: [ 4.463024] Using IPI No-Shortcut mode
Oct 29 15:08:32 darkstar kernel: [ 4.463687] PM: Checking image partition /dev/sda8
Oct 29 15:08:32 darkstar kernel: [ 4.463733] PM: Resume from partition 8:8
Oct 29 15:08:32 darkstar kernel: [ 4.463735] PM: Checking hibernation image.
Oct 29 15:08:32 darkstar kernel: [ 4.473031] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [110]
Oct 29 15:08:32 darkstar kernel: [ 4.473047] atkbd.c: Unknown key pressed (raw set 2, code 0x120 on isa0060/serio0).
Oct 29 15:08:32 darkstar kernel: [ 4.473049] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
Oct 29 15:08:32 darkstar kernel: [ 4.511209] sda8 >
Oct 29 15:08:32 darkstar kernel: [ 4.715234] drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, 0, 1) [186]
Oct 29 15:08:32 darkstar kernel: [ 4.715242] atkbd.c: Unknown key pressed (raw set 2, code 0x125 on isa0060/serio0).
Oct 29 15:08:32 darkstar kernel: [ 4.715244] atkbd.c: Use 'setkeycodes 25 <keycode>' to make it known.
Oct 29 15:08:32 darkstar kernel: [ 4.716589] drivers/input/serio/i8042.c: d4 -> i8042 (command) [186]
Oct 29 15:08:32 darkstar kernel: [ 4.716649] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [186]
Oct 29 15:08:32 darkstar kernel: [ 4.783675] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [207]
Oct 29 15:08:32 darkstar kernel: [ 4.783683] atkbd.c: Unknown key pressed (raw set 2, code 0x11f on isa0060/serio0).
Oct 29 15:08:32 darkstar kernel: [ 4.783685] atkbd.c: Use 'setkeycodes 1f <keycode>' to make it known.
Oct 29 15:08:32 darkstar kernel: [ 4.913583] drivers/input/serio/i8042.c: d4 -> i8042 (command) [246]
Oct 29 15:08:32 darkstar kernel: [ 4.956571] PM: Resume from disk failed.
Oct 29 15:08:32 darkstar kernel: [ 4.956677] registered taskstats version 1
Oct 29 15:08:32 darkstar kernel: [ 4.979979] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 29 15:08:32 darkstar kernel: [ 5.004842] Magic number: 13:858:134
Oct 29 15:08:32 darkstar kernel: [ 5.027235] acpi device:09: hash matches
Oct 29 15:08:32 darkstar kernel: [ 5.049367] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Oct 29 15:08:32 darkstar kernel: [ 5.072385] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [258]
Oct 29 15:08:32 darkstar kernel: [ 5.319685] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [367]
Oct 29 15:08:32 darkstar kernel: [ 5.319755] drivers/input/serio/i8042.c: d4 -> i8042 (command) [367]
Oct 29 15:08:32 darkstar kernel: [ 5.322450] drivers/input/serio/i8042.c: 3c -> i8042 (parameter) [367]
Oct 29 15:08:32 darkstar kernel: [ 5.330489] drivers/input/serio/i8042.c: 9e <- i8042 (interrupt, 0, 1) [370]
Oct 29 15:08:32 darkstar kernel: [ 5.330576] atkbd.c: Unknown key pressed (raw set 2, code 0x11e on isa0060/serio0).
Oct 29 15:08:32 darkstar kernel: [ 5.333797] atkbd.c: Use 'setkeycodes 1e <keycode>' to make it known.
Oct 29 15:08:32 darkstar kernel: [ 5.520261] drivers/input/serio/i8042.c: d4 -> i8042 (command) [428]
Oct 29 15:08:32 darkstar kernel: [ 5.523457] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [486]
Oct 29 15:08:32 darkstar kernel: [ 5.839759] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [523]
Oct 29 15:08:32 darkstar kernel: [ 5.839792] drivers/input/serio/i8042.c: d4 -> i8042 (command) [523]
Oct 29 15:08:32 darkstar kernel: [ 5.842149] drivers/input/serio/i8042.c: 28 -> i8042 (parameter) [524]
Oct 29 15:08:32 darkstar kernel: [ 5.847357] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [526]
Oct 29 15:08:32 darkstar kernel: [ 5.847398] drivers/input/serio/i8042.c: d4 -> i8042 (command) [526]
Oct 29 15:08:32 darkstar kernel: [ 5.847514] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [526]
Oct 29 15:08:32 darkstar kernel: [ 5.847894] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [526]
Oct 29 15:08:32 darkstar kernel: [ 5.847929] drivers/input/serio/i8042.c: d4 -> i8042 (command) [526]
Oct 29 15:08:32 darkstar kernel: [ 5.847991] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [526]
Oct 29 15:08:32 darkstar kernel: [ 5.853332] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [527]
Oct 29 15:08:32 darkstar kernel: [ 5.853374] drivers/input/serio/i8042.c: d4 -> i8042 (command) [528]
Oct 29 15:08:32 darkstar kernel: [ 5.853435] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [528]
Oct 29 15:08:32 darkstar kernel: [ 5.853865] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [528]
Oct 29 15:08:32 darkstar kernel: [ 5.853899] drivers/input/serio/i8042.c: d4 -> i8042 (command) [528]
Oct 29 15:08:32 darkstar kernel: [ 5.853960] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [528]
Oct 29 15:08:32 darkstar kernel: [ 5.859306] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [529]
Oct 29 15:08:32 darkstar kernel: [ 5.859347] drivers/input/serio/i8042.c: d4 -> i8042 (command) [529]
Oct 29 15:08:32 darkstar kernel: [ 5.859408] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [529]
Oct 29 15:08:32 darkstar kernel: [ 5.862548] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [530]
Oct 29 15:08:32 darkstar kernel: [ 5.863755] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [531]
Oct 29 15:08:32 darkstar kernel: [ 5.863796] drivers/input/serio/i8042.c: d4 -> i8042 (command) [531]
Oct 29 15:08:32 darkstar kernel: [ 5.863857] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [531]
Oct 29 15:08:32 darkstar kernel: [ 5.864236] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [531]
Oct 29 15:08:32 darkstar kernel: [ 5.864269] drivers/input/serio/i8042.c: d4 -> i8042 (command) [531]
Oct 29 15:08:32 darkstar kernel: [ 5.864331] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [531]
Oct 29 15:08:32 darkstar kernel: [ 5.869766] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [532]
Oct 29 15:08:32 darkstar kernel: [ 5.869806] drivers/input/serio/i8042.c: d4 -> i8042 (command) [532]
Oct 29 15:08:32 darkstar kernel: [ 5.869867] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [532]
Oct 29 15:08:32 darkstar kernel: [ 5.870251] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [533]
Oct 29 15:08:32 darkstar kernel: [ 5.870284] drivers/input/serio/i8042.c: d4 -> i8042 (command) [533]
Oct 29 15:08:32 darkstar kernel: [ 5.870346] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [533]
Oct 29 15:08:32 darkstar kernel: [ 5.875813] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [534]
Oct 29 15:08:32 darkstar kernel: [ 5.875853] drivers/input/serio/i8042.c: d4 -> i8042 (command) [534]
Oct 29 15:08:32 darkstar kernel: [ 5.875914] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [534]
Oct 29 15:08:32 darkstar kernel: [ 5.876297] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [534]
Oct 29 15:08:32 darkstar kernel: [ 5.876330] drivers/input/serio/i8042.c: d4 -> i8042 (command) [534]
Oct 29 15:08:32 darkstar kernel: [ 5.876391] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [534]
Oct 29 15:08:32 darkstar kernel: [ 5.881873] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [536]
Oct 29 15:08:32 darkstar kernel: [ 5.881913] drivers/input/serio/i8042.c: d4 -> i8042 (command) [536]
Oct 29 15:08:32 darkstar kernel: [ 5.881975] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [536]
Oct 29 15:08:32 darkstar kernel: [ 5.882340] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [536]
Oct 29 15:08:32 darkstar kernel: [ 5.882374] drivers/input/serio/i8042.c: d4 -> i8042 (command) [536]
Oct 29 15:08:32 darkstar kernel: [ 5.882435] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [536]
Oct 29 15:08:32 darkstar kernel: [ 5.887905] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [538]
Oct 29 15:08:32 darkstar kernel: [ 5.887945] drivers/input/serio/i8042.c: d4 -> i8042 (command) [538]
Oct 29 15:08:32 darkstar kernel: [ 5.888007] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [538]
Oct 29 15:08:32 darkstar kernel: [ 5.891177] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [539]
Oct 29 15:08:32 darkstar kernel: [ 5.894188] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [540]
Oct 29 15:08:32 darkstar kernel: [ 5.894315] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [540]
Oct 29 15:08:32 darkstar kernel: [ 5.894538] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, 1, 12) [540]
Oct 29 15:08:32 darkstar kernel: [ 5.894577] drivers/input/serio/i8042.c: d4 -> i8042 (command) [540]
Oct 29 15:08:32 darkstar kernel: [ 5.894638] drivers/input/serio/i8042.c: f6 -> i8042 (parameter) [540]
Oct 29 15:08:32 darkstar kernel: [ 5.897753] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [541]
Oct 29 15:08:32 darkstar kernel: [ 5.897793] drivers/input/serio/i8042.c: d4 -> i8042 (command) [541]
Oct 29 15:08:32 darkstar kernel: [ 5.897855] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [541]
Oct 29 15:08:32 darkstar kernel: [ 5.898230] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [541]
Oct 29 15:08:32 darkstar kernel: [ 5.898264] drivers/input/serio/i8042.c: d4 -> i8042 (command) [541]
Oct 29 15:08:32 darkstar kernel: [ 5.898326] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [541]
Oct 29 15:08:32 darkstar kernel: [ 5.903804] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [543]
Oct 29 15:08:32 darkstar kernel: [ 5.903844] drivers/input/serio/i8042.c: d4 -> i8042 (command) [543]
Oct 29 15:08:32 darkstar kernel: [ 5.903905] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [543]
Oct 29 15:08:32 darkstar kernel: [ 5.907069] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [544]
Oct 29 15:08:32 darkstar kernel: [ 5.907109] drivers/input/serio/i8042.c: d4 -> i8042 (command) [544]
Oct 29 15:08:32 darkstar kernel: [ 5.907170] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [544]
Oct 29 15:08:32 darkstar kernel: [ 5.909865] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [544]
Oct 29 15:08:32 darkstar kernel: [ 5.909905] drivers/input/serio/i8042.c: d4 -> i8042 (command) [544]
Oct 29 15:08:32 darkstar kernel: [ 5.909966] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [544]
Oct 29 15:08:32 darkstar kernel: [ 5.913103] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [545]
Oct 29 15:08:32 darkstar kernel: [ 5.913143] drivers/input/serio/i8042.c: d4 -> i8042 (command) [545]
Oct 29 15:08:32 darkstar kernel: [ 5.913204] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [545]
Oct 29 15:08:32 darkstar kernel: [ 5.916550] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [546]
Oct 29 15:08:32 darkstar kernel: [ 5.919557] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [547]
Oct 29 15:08:32 darkstar kernel: [ 5.919719] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [547]
Oct 29 15:08:32 darkstar kernel: [ 5.919932] drivers/input/serio/i8042.c: 64 <- i8042 (interrupt, 1, 12) [547]
Oct 29 15:08:32 darkstar kernel: [ 5.919971] drivers/input/serio/i8042.c: d4 -> i8042 (command) [547]
Oct 29 15:08:32 darkstar kernel: [ 5.920032] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [547]
Oct 29 15:08:32 darkstar kernel: [ 5.920396] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [548]
Oct 29 15:08:32 darkstar kernel: [ 5.920430] drivers/input/serio/i8042.c: d4 -> i8042 (command) [548]
Oct 29 15:08:32 darkstar kernel: [ 5.920491] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [548]
Oct 29 15:08:32 darkstar kernel: [ 5.925916] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [549]
Oct 29 15:08:32 darkstar kernel: [ 5.925956] drivers/input/serio/i8042.c: d4 -> i8042 (command) [549]
Oct 29 15:08:32 darkstar kernel: [ 5.926018] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [549]
Oct 29 15:08:32 darkstar kernel: [ 5.929179] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [550]
Oct 29 15:08:32 darkstar kernel: [ 5.929219] drivers/input/serio/i8042.c: d4 -> i8042 (command) [550]
Oct 29 15:08:32 darkstar kernel: [ 5.929281] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [550]
Oct 29 15:08:32 darkstar kernel: [ 5.932607] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [551]
Oct 29 15:08:32 darkstar kernel: [ 5.932647] drivers/input/serio/i8042.c: d4 -> i8042 (command) [551]
Oct 29 15:08:32 darkstar kernel: [ 5.932708] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [551]
Oct 29 15:08:32 darkstar kernel: [ 5.936036] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [552]
Oct 29 15:08:32 darkstar kernel: [ 5.936076] drivers/input/serio/i8042.c: d4 -> i8042 (command) [552]
Oct 29 15:08:32 darkstar kernel: [ 5.936137] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [552]
Oct 29 15:08:32 darkstar kernel: [ 5.939444] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [553]
Oct 29 15:08:32 darkstar kernel: [ 5.942512] drivers/input/serio/i8042.c: 73 <- i8042 (interrupt, 1, 12) [554]
Oct 29 15:08:32 darkstar kernel: [ 5.942673] drivers/input/serio/i8042.c: 02 <- i8042 (interrupt, 1, 12) [554]
Oct 29 15:08:32 darkstar kernel: [ 5.942886] drivers/input/serio/i8042.c: 50 <- i8042 (interrupt, 1, 12) [554]
Oct 29 15:08:32 darkstar kernel: [ 5.942933] drivers/input/serio/i8042.c: d4 -> i8042 (command) [554]
Oct 29 15:08:32 darkstar kernel: [ 5.942995] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [554]
Oct 29 15:08:32 darkstar kernel: [ 5.943347] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [555]
Oct 29 15:08:32 darkstar kernel: [ 5.943381] drivers/input/serio/i8042.c: d4 -> i8042 (command) [555]
Oct 29 15:08:32 darkstar kernel: [ 5.943442] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [555]
Oct 29 15:08:32 darkstar kernel: [ 5.948979] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [556]
Oct 29 15:08:32 darkstar kernel: [ 5.949020] drivers/input/serio/i8042.c: d4 -> i8042 (command) [556]
Oct 29 15:08:32 darkstar kernel: [ 5.949081] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [556]
Oct 29 15:08:32 darkstar kernel: [ 5.952244] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [557]
Oct 29 15:08:32 darkstar kernel: [ 5.952284] drivers/input/serio/i8042.c: d4 -> i8042 (command) [557]
Oct 29 15:08:32 darkstar kernel: [ 5.952345] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [557]
Oct 29 15:08:32 darkstar kernel: [ 5.954432] async/0 used greatest stack depth: 6036 bytes left
Oct 29 15:08:32 darkstar kernel: [ 5.955629] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [558]
Oct 29 15:08:32 darkstar kernel: [ 5.955687] drivers/input/serio/i8042.c: d4 -> i8042 (command) [558]
Oct 29 15:08:32 darkstar kernel: [ 5.955750] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [558]
Oct 29 15:08:32 darkstar kernel: [ 5.959057] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [558]
Oct 29 15:08:32 darkstar kernel: [ 5.959168] drivers/input/serio/i8042.c: d4 -> i8042 (command) [558]
Oct 29 15:08:32 darkstar kernel: [ 5.959231] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [558]
Oct 29 15:08:32 darkstar kernel: [ 5.976954] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [565]
Oct 29 15:08:32 darkstar kernel: [ 5.977073] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [565]
Oct 29 15:08:32 darkstar kernel: [ 5.977191] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [565]
Oct 29 15:08:32 darkstar kernel: [ 5.977336] drivers/input/serio/i8042.c: 64 <- i8042 (interrupt, 1, 12) [565]
Oct 29 15:08:32 darkstar kernel: [ 5.977370] drivers/input/serio/i8042.c: d4 -> i8042 (command) [565]
Oct 29 15:08:32 darkstar kernel: [ 5.977431] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [565]
Oct 29 15:08:32 darkstar kernel: [ 5.977798] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [565]
Oct 29 15:08:32 darkstar kernel: [ 5.977826] drivers/input/serio/i8042.c: d4 -> i8042 (command) [565]
Oct 29 15:08:32 darkstar kernel: [ 5.977888] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [565]
Oct 29 15:08:32 darkstar kernel: [ 5.983314] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [566]
Oct 29 15:08:32 darkstar kernel: [ 5.983369] drivers/input/serio/i8042.c: d4 -> i8042 (command) [566]
Oct 29 15:08:32 darkstar kernel: [ 5.983430] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [566]
Oct 29 15:08:32 darkstar kernel: [ 5.986598] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [567]
Oct 29 15:08:32 darkstar kernel: [ 5.986633] drivers/input/serio/i8042.c: d4 -> i8042 (command) [567]
Oct 29 15:08:32 darkstar kernel: [ 5.986694] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [567]
Oct 29 15:08:32 darkstar kernel: [ 5.990039] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [568]
Oct 29 15:08:32 darkstar kernel: [ 5.990150] drivers/input/serio/i8042.c: d4 -> i8042 (command) [568]
Oct 29 15:08:32 darkstar kernel: [ 5.990214] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [568]
Oct 29 15:08:32 darkstar kernel: [ 5.993986] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [569]
Oct 29 15:08:32 darkstar kernel: [ 5.994064] drivers/input/serio/i8042.c: d4 -> i8042 (command) [569]
Oct 29 15:08:32 darkstar kernel: [ 5.994128] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [569]
Oct 29 15:08:32 darkstar kernel: [ 5.997399] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [570]
Oct 29 15:08:32 darkstar kernel: [ 6.000394] drivers/input/serio/i8042.c: 73 <- i8042 (interrupt, 1, 12) [571]
Oct 29 15:08:32 darkstar kernel: [ 6.000638] drivers/input/serio/i8042.c: 02 <- i8042 (interrupt, 1, 12) [571]
Oct 29 15:08:32 darkstar kernel: [ 6.000855] drivers/input/serio/i8042.c: 50 <- i8042 (interrupt, 1, 12) [571]
Oct 29 15:08:32 darkstar kernel: [ 6.000975] drivers/input/serio/i8042.c: d4 -> i8042 (command) [572]
Oct 29 15:08:32 darkstar kernel: [ 6.001040] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [572]
Oct 29 15:08:32 darkstar kernel: [ 6.004211] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [572]
Oct 29 15:08:32 darkstar kernel: [ 6.007249] drivers/input/serio/i8042.c: 10 <- i8042 (interrupt, 1, 12) [574]
Oct 29 15:08:32 darkstar kernel: [ 6.007387] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [574]
Oct 29 15:08:32 darkstar kernel: [ 6.007641] drivers/input/serio/i8042.c: 64 <- i8042 (interrupt, 1, 12) [574]
Oct 29 15:08:32 darkstar kernel: [ 6.007729] drivers/input/serio/i8042.c: d4 -> i8042 (command) [574]
Oct 29 15:08:32 darkstar kernel: [ 6.007793] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [574]
Oct 29 15:08:32 darkstar kernel: [ 6.010910] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [575]
Oct 29 15:08:32 darkstar kernel: [ 6.010995] drivers/input/serio/i8042.c: d4 -> i8042 (command) [575]
Oct 29 15:08:32 darkstar kernel: [ 6.011059] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [575]
Oct 29 15:08:32 darkstar kernel: [ 6.014288] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [576]
Oct 29 15:08:32 darkstar kernel: [ 6.014374] drivers/input/serio/i8042.c: d4 -> i8042 (command) [576]
Oct 29 15:08:32 darkstar kernel: [ 6.014439] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [576]
Oct 29 15:08:32 darkstar kernel: [ 6.014840] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [576]
Oct 29 15:08:32 darkstar kernel: [ 6.014914] drivers/input/serio/i8042.c: d4 -> i8042 (command) [576]
Oct 29 15:08:32 darkstar kernel: [ 6.014979] drivers/input/serio/i8042.c: 0a -> i8042 (parameter) [576]
Oct 29 15:08:32 darkstar kernel: [ 6.020364] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [578]
Oct 29 15:08:32 darkstar kernel: [ 6.020451] drivers/input/serio/i8042.c: d4 -> i8042 (command) [578]
Oct 29 15:08:32 darkstar kernel: [ 6.020516] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [578]
Oct 29 15:08:32 darkstar kernel: [ 6.023620] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [579]
Oct 29 15:08:32 darkstar kernel: [ 6.023705] drivers/input/serio/i8042.c: d4 -> i8042 (command) [579]
Oct 29 15:08:32 darkstar kernel: [ 6.023770] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [579]
Oct 29 15:08:32 darkstar kernel: [ 6.026976] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [580]
Oct 29 15:08:32 darkstar kernel: [ 6.027063] drivers/input/serio/i8042.c: d4 -> i8042 (command) [580]
Oct 29 15:08:32 darkstar kernel: [ 6.027601] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [580]
Oct 29 15:08:32 darkstar kernel: [ 6.030817] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [581]
Oct 29 15:08:32 darkstar kernel: [ 6.030875] drivers/input/serio/i8042.c: d4 -> i8042 (command) [581]
Oct 29 15:08:32 darkstar kernel: [ 6.030939] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [581]
Oct 29 15:08:32 darkstar kernel: [ 6.034248] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [582]
Oct 29 15:08:32 darkstar kernel: [ 6.037294] drivers/input/serio/i8042.c: 15 <- i8042 (interrupt, 1, 12) [583]
Oct 29 15:08:32 darkstar kernel: [ 6.037432] drivers/input/serio/i8042.c: 01 <- i8042 (interrupt, 1, 12) [583]
Oct 29 15:08:32 darkstar kernel: [ 6.037673] drivers/input/serio/i8042.c: 0a <- i8042 (interrupt, 1, 12) [583]
Oct 29 15:08:32 darkstar kernel: [ 6.037760] drivers/input/serio/i8042.c: d4 -> i8042 (command) [583]
Oct 29 15:08:32 darkstar kernel: [ 6.037824] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [583]
Oct 29 15:08:32 darkstar kernel: [ 6.040942] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [584]
Oct 29 15:08:32 darkstar kernel: [ 6.041029] drivers/input/serio/i8042.c: d4 -> i8042 (command) [584]
Oct 29 15:08:32 darkstar kernel: [ 6.041094] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [584]
Oct 29 15:08:32 darkstar kernel: [ 6.044325] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [585]
Oct 29 15:08:32 darkstar kernel: [ 6.044411] drivers/input/serio/i8042.c: d4 -> i8042 (command) [585]
Oct 29 15:08:32 darkstar kernel: [ 6.044475] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [585]
Oct 29 15:08:32 darkstar kernel: [ 6.047695] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [586]
Oct 29 15:08:32 darkstar kernel: [ 6.047781] drivers/input/serio/i8042.c: d4 -> i8042 (command) [586]
Oct 29 15:08:32 darkstar kernel: [ 6.047846] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [586]
Oct 29 15:08:32 darkstar kernel: [ 6.051075] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [587]
Oct 29 15:08:32 darkstar kernel: [ 6.051161] drivers/input/serio/i8042.c: d4 -> i8042 (command) [587]
Oct 29 15:08:32 darkstar kernel: [ 6.051225] drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [587]
Oct 29 15:08:32 darkstar kernel: [ 6.054427] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [588]
Oct 29 15:08:32 darkstar kernel: [ 6.054516] drivers/input/serio/i8042.c: d4 -> i8042 (command) [588]
Oct 29 15:08:32 darkstar kernel: [ 6.054580] drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [588]
Oct 29 15:08:32 darkstar kernel: [ 6.057823] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [589]
Oct 29 15:08:32 darkstar kernel: [ 6.057908] drivers/input/serio/i8042.c: d4 -> i8042 (command) [589]
Oct 29 15:08:32 darkstar kernel: [ 6.057973] drivers/input/serio/i8042.c: ea -> i8042 (parameter) [589]
Oct 29 15:08:32 darkstar kernel: [ 6.061698] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [590]
Oct 29 15:08:32 darkstar kernel: [ 6.062978] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
Oct 29 15:08:32 darkstar kernel: [ 6.086920] drivers/input/serio/i8042.c: d4 -> i8042 (command) [598]
Oct 29 15:08:32 darkstar kernel: [ 6.086986] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [598]
Oct 29 15:08:32 darkstar kernel: [ 6.087282] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [598]
Oct 29 15:08:32 darkstar kernel: [ 6.087325] drivers/input/serio/i8042.c: d4 -> i8042 (command) [598]
Oct 29 15:08:32 darkstar kernel: [ 6.087390] drivers/input/serio/i8042.c: 64 -> i8042 (parameter) [598]
Oct 29 15:08:32 darkstar kernel: [ 6.092777] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [599]
Oct 29 15:08:32 darkstar kernel: [ 6.092861] drivers/input/serio/i8042.c: d4 -> i8042 (command) [599]
Oct 29 15:08:32 darkstar kernel: [ 6.092925] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [599]
Oct 29 15:08:32 darkstar kernel: [ 6.093316] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [599]
Oct 29 15:08:32 darkstar kernel: [ 6.093426] drivers/input/serio/i8042.c: d4 -> i8042 (command) [600]
Oct 29 15:08:32 darkstar kernel: [ 6.093491] drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [600]
Oct 29 15:08:32 darkstar kernel: [ 6.098930] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [601]
Oct 29 15:08:32 darkstar kernel: [ 6.099009] drivers/input/serio/i8042.c: d4 -> i8042 (command) [601]
Oct 29 15:08:32 darkstar kernel: [ 6.099074] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [601]
Oct 29 15:08:32 darkstar kernel: [ 6.102264] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [602]
Oct 29 15:08:32 darkstar kernel: [ 6.102920] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
Oct 29 15:08:32 darkstar kernel: [ 6.126546] drivers/input/serio/i8042.c: d4 -> i8042 (command) [609]
Oct 29 15:08:32 darkstar kernel: [ 6.126612] drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [609]
Oct 29 15:08:32 darkstar kernel: [ 6.129705] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [610]
Oct 29 15:08:32 darkstar kernel: [ 6.129990] md: Waiting for all devices to be available before autodetect
Oct 29 15:08:32 darkstar kernel: [ 6.152892] md: If you don't use raid, use raid=noautodetect
Oct 29 15:08:32 darkstar kernel: [ 6.178277] md: Autodetecting RAID arrays.
Oct 29 15:08:32 darkstar kernel: [ 6.189302] md: Scanned 0 and added 0 devices.
Oct 29 15:08:32 darkstar kernel: [ 6.200230] md: autorun ...
Oct 29 15:08:32 darkstar kernel: [ 6.211012] md: ... autorun DONE.
Oct 29 15:08:32 darkstar kernel: [ 6.501012] kjournald starting. Commit interval 5 seconds
Oct 29 15:08:32 darkstar kernel: [ 6.501731] EXT3-fs: mounted filesystem with writeback data mode.
Oct 29 15:08:32 darkstar kernel: [ 6.501973] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
Oct 29 15:08:32 darkstar kernel: [ 6.566188] Freeing unused kernel memory: 384k freed
Oct 29 15:08:32 darkstar kernel: [ 6.588717] Write protecting the kernel text: 3404k
Oct 29 15:08:32 darkstar kernel: [ 6.599694] Write protecting the kernel read-only data: 1932k
Oct 29 15:08:32 darkstar kernel: [ 8.993092] cdrom_id used greatest stack depth: 5856 bytes left
Oct 29 15:08:32 darkstar kernel: [ 9.012525] cfg80211: Using static regulatory domain info
Oct 29 15:08:32 darkstar kernel: [ 9.023380] cfg80211: Regulatory domain: US
Oct 29 15:08:32 darkstar kernel: [ 9.033906] ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Oct 29 15:08:32 darkstar kernel: [ 9.044924] ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
Oct 29 15:08:32 darkstar kernel: [ 9.055982] ^I(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Oct 29 15:08:32 darkstar kernel: [ 9.066742] ^I(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Oct 29 15:08:32 darkstar kernel: [ 9.069530] ACPI: WMI: Mapper loaded
Oct 29 15:08:32 darkstar kernel: [ 9.088499] ^I(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Oct 29 15:08:32 darkstar kernel: [ 9.099789] ^I(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Oct 29 15:08:32 darkstar kernel: [ 9.110511] ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Oct 29 15:08:32 darkstar kernel: [ 9.215994] cfg80211: Calling CRDA for country: US
Oct 29 15:08:32 darkstar kernel: [ 9.576264] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
Oct 29 15:08:32 darkstar kernel: [ 9.621094] b43-phy0 debug: Found PHY: Analog 6, Type 5, Revision 1
Oct 29 15:08:32 darkstar kernel: [ 9.621119] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2062, Revision 2
Oct 29 15:08:32 darkstar kernel: [ 9.643418] phy0: Selected rate control algorithm 'minstrel'
Oct 29 15:08:32 darkstar kernel: [ 9.647010] Registered led device: b43-phy0::tx
Oct 29 15:08:32 darkstar kernel: [ 9.668083] Registered led device: b43-phy0::rx
Oct 29 15:08:32 darkstar kernel: [ 9.688675] Registered led device: b43-phy0::radio
Oct 29 15:08:32 darkstar kernel: [ 9.698934] Broadcom 43xx driver loaded [ Features: PLS, Firmware-ID: FW13 ]
Oct 29 15:08:32 darkstar kernel: [ 10.006303] ohci1394 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 29 15:08:32 darkstar kernel: [ 10.083112] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f67ff800-f67fffff] Max Packet=[2048] IR/IT contexts=[4/4]
Oct 29 15:08:32 darkstar kernel: [ 10.189891] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Oct 29 15:08:32 darkstar kernel: [ 10.211309] HDA Intel 0000:00:1b.0: setting latency timer to 64
Oct 29 15:08:32 darkstar kernel: [ 10.659098] Adding 2008084k swap on /dev/sda8. Priority:-1 extents:1 across:2008084k
Oct 29 15:08:32 darkstar kernel: [ 11.373895] ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc0001679c05c]
Oct 29 15:08:32 darkstar kernel: [ 12.833903] EXT3 FS on sda2, internal journal
Oct 29 15:08:32 darkstar kernel: [ 17.492595] kjournald starting. Commit interval 5 seconds
Oct 29 15:08:32 darkstar kernel: [ 17.493282] EXT3 FS on sda3, internal journal
Oct 29 15:08:32 darkstar kernel: [ 17.493315] EXT3-fs: mounted filesystem with writeback data mode.

>
> --
> Dmitry

2009-11-01 08:33:10

by Dave Young

[permalink] [raw]

Subject: Re: [PATCH][RFC] input: remove bios I8042_CTR_XLATE check to make keyboard usable

On Thu, Oct 29, 2009 at 3:15 PM, Dave Young <[email protected]> wrote:
> On Wed, Oct 28, 2009 at 08:26:33PM -0700, Dmitry Torokhov wrote:
>> On Thu, Oct 29, 2009 at 08:33:26AM +0800, Dave Young wrote:
>> > On Wed, Oct 28, 2009 at 06:42:12PM +0800, Dave Young wrote:
>> > > On Wed, Oct 28, 2009 at 11:03:18AM +0100, Vojtech Pavlik wrote:
>> > > > On Tue, Oct 27, 2009 at 10:43:10PM -0700, Dmitry Torokhov wrote:
>> > > > > Hi Dave,
>> > > > >
>> > > > > On Tue, Oct 27, 2009 at 01:34:04PM +0800, Dave Young wrote:
>> > > > > >
>> > > > > > Pressing somekey at early booting phase cause keyboard to be not usable
>> > > > > > (The hardware is DELL latitude e5400):
>> > > >
>> > > > Does early booting mean while the BIOS is coming up? Does the keyboard
>> > > > work in GRUB then? Or is it during the early init of the Linux kernel?
>> > >
>> > > Keyboard work under lilo.
>> > > For the early booting I means the early init of the linux kernel
>> > >
>> > > >
>> > > > > > atkbd.c: Unknown key pressed (raw set 2, code 0xd3 on isa0060/serio0).
>> > > > > > atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
>> > > > > > atkbd.c: Unknown key pressed (raw set 2, code 0x1d3 on isa0060/serio0).
>> > > > > > atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
>> > > > > >
>> > > > > > i8042.c set i8042_direct to true when the controller init. But the result
>> > > > > > is keyboard not usable, The only option is press the power button to shutdown.
>> > > > > >
>> > > > > > So here remove the bios check to fix it.
>> > > >
>> > > > My question would be: Why this happens? Could it be that the probe is
>> > > > confused by the keypress and reads the CTR incorrectly? Or is it just
>> > > > that the keyboard controller is in fact in translating mode, yet the CTR
>> > > > indicates otherwise?
>> > > >
>> > > > A i8042.debug=1 log of the bad init would be good.
>> > >
>> > > Here it is (retrieve from syslog):
>> >
>> > Syslog redirect the debug info to another log file, sorry, post again:
>> >
>>
>> Any chance of reconfiguring syslog so debug is captured in the same
>> file? It is easier to see what is happening with the rest of context
>> present...
>
> Sure, here it is:
>
> Oct 29 15:08:32 darkstar kernel: [ 1.769328] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
> Oct 29 15:08:32 darkstar kernel: [ 1.775105] Console: switching to colour dummy device 80x25
> Oct 29 15:08:32 darkstar kernel: [ 1.836980] [drm] LVDS-8: set mode 1280x800 c
> Oct 29 15:08:32 darkstar kernel: [ 2.067531] async/0 used greatest stack depth: 6184 bytes left
> Oct 29 15:08:32 darkstar kernel: [ 2.228157] Console: switching to colour frame buffer device 160x50
> Oct 29 15:08:32 darkstar kernel: [ 2.260999] fb0: inteldrmfb frame buffer device
> Oct 29 15:08:32 darkstar kernel: [ 2.261001] registered panic notifier
> Oct 29 15:08:32 darkstar kernel: [ 2.309878] acpi device:3b: registered as cooling_device2
> Oct 29 15:08:32 darkstar kernel: [ 2.311325] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input3
> Oct 29 15:08:32 darkstar kernel: [ 2.311794] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
> Oct 29 15:08:32 darkstar kernel: [ 2.312212] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
> Oct 29 15:08:32 darkstar kernel: [ 2.312910] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input4
> Oct 29 15:08:32 darkstar kernel: [ 2.313337] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
> Oct 29 15:08:32 darkstar kernel: [ 2.313768] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> Oct 29 15:08:32 darkstar kernel: [ 2.314252] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> Oct 29 15:08:32 darkstar kernel: [ 2.321153] brd: module loaded
> Oct 29 15:08:32 darkstar kernel: [ 2.323814] loop: module loaded
> Oct 29 15:08:32 darkstar kernel: [ 2.324372] Loading iSCSI transport class v2.0-870.
> Oct 29 15:08:32 darkstar kernel: [ 2.325679] ata_piix 0000:00:1f.2: version 2.13
> Oct 29 15:08:32 darkstar kernel: [ 2.325706] ata_piix 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> Oct 29 15:08:32 darkstar kernel: [ 2.326042] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
> Oct 29 15:08:32 darkstar kernel: [ 2.326420] ata_piix 0000:00:1f.2: setting latency timer to 64
> Oct 29 15:08:32 darkstar kernel: [ 2.326548] scsi0 : ata_piix
> Oct 29 15:08:32 darkstar kernel: [ 2.327157] scsi1 : ata_piix
> Oct 29 15:08:32 darkstar kernel: [ 2.329192] ata1: SATA max UDMA/133 cmd 0x6e70 ctl 0x6e78 bmdma 0x6ea0 irq 19
> Oct 29 15:08:32 darkstar kernel: [ 2.329525] ata2: SATA max UDMA/133 cmd 0x6e80 ctl 0x6e88 bmdma 0x6ea8 irq 19
> Oct 29 15:08:32 darkstar kernel: [ 2.329918] ata_piix 0000:00:1f.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> Oct 29 15:08:32 darkstar kernel: [ 2.330280] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
> Oct 29 15:08:32 darkstar kernel: [ 2.483399] ata_piix 0000:00:1f.5: setting latency timer to 64
> Oct 29 15:08:32 darkstar kernel: [ 2.483472] scsi2 : ata_piix
> Oct 29 15:08:32 darkstar kernel: [ 2.483889] scsi3 : ata_piix
> Oct 29 15:08:32 darkstar kernel: [ 2.494799] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 19
> Oct 29 15:08:32 darkstar kernel: [ 2.505374] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 19
> Oct 29 15:08:32 darkstar kernel: [ 2.517131] tg3.c:v3.102 (September 1, 2009)
> Oct 29 15:08:32 darkstar kernel: [ 2.527407] tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> Oct 29 15:08:32 darkstar kernel: [ 2.537850] tg3 0000:09:00.0: setting latency timer to 64
> Oct 29 15:08:32 darkstar kernel: [ 2.556144] eth0: Tigon3 [partno(BCM95756m) rev a200] (PCI Express) MAC address 00:21:9b:f5:60:0f
> Oct 29 15:08:32 darkstar kernel: [ 2.566888] eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1])
> Oct 29 15:08:32 darkstar kernel: [ 2.577614] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
> Oct 29 15:08:32 darkstar kernel: [ 2.588351] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
> Oct 29 15:08:32 darkstar kernel: [ 2.599287] sky2 driver version 1.25
> Oct 29 15:08:32 darkstar kernel: [ 2.610019] PPP generic driver version 2.4.2
> Oct 29 15:08:32 darkstar kernel: [ 2.620820] PPP Deflate Compression module registered
> Oct 29 15:08:32 darkstar kernel: [ 2.631273] PPP BSD Compression module registered
> Oct 29 15:08:32 darkstar kernel: [ 2.642068] PPP MPPE Compression module registered
> Oct 29 15:08:32 darkstar kernel: [ 2.652346] NET: Registered protocol family 24
> Oct 29 15:08:32 darkstar kernel: [ 2.662740] PPPoL2TP kernel driver, V1.0
> Oct 29 15:08:32 darkstar kernel: [ 2.673215] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
> Oct 29 15:08:32 darkstar kernel: [ 2.684287] CSLIP: code copyright 1989 Regents of the University of California.
> Oct 29 15:08:32 darkstar kernel: [ 2.695418] SLIP linefill/keepalive option.
> Oct 29 15:08:32 darkstar kernel: [ 2.706655] console [netcon0] enabled
> Oct 29 15:08:32 darkstar kernel: [ 2.717759] netconsole: network logging started
> Oct 29 15:08:32 darkstar kernel: [ 2.729216] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> Oct 29 15:08:32 darkstar kernel: [ 2.740669] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
> Oct 29 15:08:32 darkstar kernel: [ 2.752135] ehci_hcd 0000:00:1a.7: setting latency timer to 64
> Oct 29 15:08:32 darkstar kernel: [ 2.752141] ehci_hcd 0000:00:1a.7: EHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 2.763541] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
> Oct 29 15:08:32 darkstar kernel: [ 2.774930] ehci_hcd 0000:00:1a.7: debug port 1
> Oct 29 15:08:32 darkstar kernel: [ 2.789956] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
> Oct 29 15:08:32 darkstar kernel: [ 2.789984] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
> Oct 29 15:08:32 darkstar kernel: [ 2.803419] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> Oct 29 15:08:32 darkstar kernel: [ 2.805095] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> Oct 29 15:08:32 darkstar kernel: [ 2.838801] ata4: SATA link down (SStatus 4 SControl 300)
> Oct 29 15:08:32 darkstar kernel: [ 2.850203] ata3: SATA link down (SStatus 0 SControl 300)
> Oct 29 15:08:32 darkstar kernel: [ 2.850605] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> Oct 29 15:08:32 darkstar kernel: [ 2.850787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> Oct 29 15:08:32 darkstar kernel: [ 2.850790] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Oct 29 15:08:32 darkstar kernel: [ 2.850793] usb usb1: Product: EHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 2.850795] usb usb1: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 ehci_hcd
> Oct 29 15:08:32 darkstar kernel: [ 2.850797] usb usb1: SerialNumber: 0000:00:1a.7
> Oct 29 15:08:32 darkstar kernel: [ 2.851349] usb usb1: configuration #1 chosen from 1 choice
> Oct 29 15:08:32 darkstar kernel: [ 2.851747] hub 1-0:1.0: USB hub found
> Oct 29 15:08:32 darkstar kernel: [ 2.851792] hub 1-0:1.0: 6 ports detected
> Oct 29 15:08:32 darkstar kernel: [ 2.852198] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> Oct 29 15:08:32 darkstar kernel: [ 2.852216] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> Oct 29 15:08:32 darkstar kernel: [ 2.852220] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 2.852233] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
> Oct 29 15:08:32 darkstar kernel: [ 2.852275] ehci_hcd 0000:00:1d.7: debug port 1
> Oct 29 15:08:32 darkstar kernel: [ 2.856179] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
> Oct 29 15:08:32 darkstar kernel: [ 2.856205] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
> Oct 29 15:08:32 darkstar kernel: [ 3.000521] ata1.00: ATA-8: ST9160310AS, DE04, max UDMA/133
> Oct 29 15:08:32 darkstar kernel: [ 3.000905] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633A, D500, max UDMA/100
> Oct 29 15:08:32 darkstar kernel: [ 3.000919] ata2.00: applying bridge limits
> Oct 29 15:08:32 darkstar kernel: [ 3.030396] ata2.00: configured for UDMA/100
> Oct 29 15:08:32 darkstar kernel: [ 3.040423] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> Oct 29 15:08:32 darkstar kernel: [ 3.040485] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
> Oct 29 15:08:32 darkstar kernel: [ 3.060761] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> Oct 29 15:08:32 darkstar kernel: [ 3.071186] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Oct 29 15:08:32 darkstar kernel: [ 3.071212] ata1.00: configured for UDMA/133
> Oct 29 15:08:32 darkstar kernel: [ 3.071835] scsi 0:0:0:0: Direct-Access ATA ST9160310AS DE04 PQ: 0 ANSI: 5
> Oct 29 15:08:32 darkstar kernel: [ 3.073532] sd 0:0:0:0: Attached scsi generic sg0 type 0
> Oct 29 15:08:32 darkstar kernel: [ 3.074208] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
> Oct 29 15:08:32 darkstar kernel: [ 3.074331] sd 0:0:0:0: [sda] Write Protect is off
> Oct 29 15:08:32 darkstar kernel: [ 3.074334] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> Oct 29 15:08:32 darkstar kernel: [ 3.074397] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Oct 29 15:08:32 darkstar kernel: [ 3.142477] usb usb2: Product: EHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 3.152723] usb usb2: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 ehci_hcd
> Oct 29 15:08:32 darkstar kernel: [ 3.163136] usb usb2: SerialNumber: 0000:00:1d.7
> Oct 29 15:08:32 darkstar kernel: [ 3.173957] usb usb2: configuration #1 chosen from 1 choice
> Oct 29 15:08:32 darkstar kernel: [ 3.184694] hub 2-0:1.0: USB hub found
> Oct 29 15:08:32 darkstar kernel: [ 3.186168] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633A D500 PQ: 0 ANSI: 5
> Oct 29 15:08:32 darkstar kernel: [ 3.205673] sda:
> Oct 29 15:08:32 darkstar kernel: [ 3.205887] hub 2-0:1.0: 6 ports detected
> Oct 29 15:08:32 darkstar kernel: [ 3.226536] uhci_hcd: USB Universal Host Controller Interface driver
> Oct 29 15:08:32 darkstar kernel: [ 3.236805] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> Oct 29 15:08:32 darkstar kernel: [ 3.247146] uhci_hcd 0000:00:1a.0: setting latency timer to 64
> Oct 29 15:08:32 darkstar kernel: [ 3.247152] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 3.257722] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> Oct 29 15:08:32 darkstar kernel: [ 3.268019] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
> Oct 29 15:08:32 darkstar kernel: [ 3.271348] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> Oct 29 15:08:32 darkstar kernel: [ 3.271352] Uniform CD-ROM driver Revision: 3.20
> Oct 29 15:08:32 darkstar kernel: [ 3.271935] sr 1:0:0:0: Attached scsi CD-ROM sr0
> Oct 29 15:08:32 darkstar kernel: [ 3.272214] sr 1:0:0:0: Attached scsi generic sg1 type 5
> Oct 29 15:08:32 darkstar kernel: [ 3.309009] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> Oct 29 15:08:32 darkstar kernel: [ 3.319485] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Oct 29 15:08:32 darkstar kernel: [ 3.329938] usb usb3: Product: UHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 3.340494] usb usb3: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 uhci_hcd
> Oct 29 15:08:32 darkstar kernel: [ 3.351173] usb usb3: SerialNumber: 0000:00:1a.0
> Oct 29 15:08:32 darkstar kernel: [ 3.362274] usb usb3: configuration #1 chosen from 1 choice
> Oct 29 15:08:32 darkstar kernel: [ 3.373209] hub 3-0:1.0: USB hub found
> Oct 29 15:08:32 darkstar kernel: [ 3.383878] hub 3-0:1.0: 2 ports detected
> Oct 29 15:08:32 darkstar kernel: [ 3.394578] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> Oct 29 15:08:32 darkstar kernel: [ 3.405325] uhci_hcd 0000:00:1a.1: setting latency timer to 64
> Oct 29 15:08:32 darkstar kernel: [ 3.405330] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 3.415917] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> Oct 29 15:08:32 darkstar kernel: [ 3.426596] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
> Oct 29 15:08:32 darkstar kernel: [ 3.437249] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> Oct 29 15:08:32 darkstar kernel: [ 3.447963] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Oct 29 15:08:32 darkstar kernel: [ 3.458896] usb usb4: Product: UHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 3.469684] usb usb4: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 uhci_hcd
> Oct 29 15:08:32 darkstar kernel: [ 3.480609] usb usb4: SerialNumber: 0000:00:1a.1
> Oct 29 15:08:32 darkstar kernel: [ 3.491487] sda1 sda2 sda3 sda4 <
> Oct 29 15:08:32 darkstar kernel: [ 3.491970] usb usb4: configuration #1 chosen from 1 choice
> Oct 29 15:08:32 darkstar kernel: [ 3.513750] hub 4-0:1.0: USB hub found
> Oct 29 15:08:32 darkstar kernel: [ 3.524608] hub 4-0:1.0: 2 ports detected
> Oct 29 15:08:32 darkstar kernel: [ 3.535457] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
> Oct 29 15:08:32 darkstar kernel: [ 3.546368] uhci_hcd 0000:00:1a.2: setting latency timer to 64
> Oct 29 15:08:32 darkstar kernel: [ 3.546373] uhci_hcd 0000:00:1a.2: UHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 3.557269] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
> Oct 29 15:08:32 darkstar kernel: [ 3.568246] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
> Oct 29 15:08:32 darkstar kernel: [ 3.579151] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> Oct 29 15:08:32 darkstar kernel: [ 3.590038] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Oct 29 15:08:32 darkstar kernel: [ 3.601062] usb usb5: Product: UHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 3.611827] usb usb5: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 uhci_hcd
> Oct 29 15:08:32 darkstar kernel: [ 3.622664] usb usb5: SerialNumber: 0000:00:1a.2
> Oct 29 15:08:32 darkstar kernel: [ 3.633580] usb usb5: configuration #1 chosen from 1 choice
> Oct 29 15:08:32 darkstar kernel: [ 3.644466] hub 5-0:1.0: USB hub found
> Oct 29 15:08:32 darkstar kernel: [ 3.655057] hub 5-0:1.0: 2 ports detected
> Oct 29 15:08:32 darkstar kernel: [ 3.665643] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> Oct 29 15:08:32 darkstar kernel: [ 3.676188] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> Oct 29 15:08:32 darkstar kernel: [ 3.676193] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 3.686592] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
> Oct 29 15:08:32 darkstar kernel: [ 3.697039] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
> Oct 29 15:08:32 darkstar kernel: [ 3.707478] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> Oct 29 15:08:32 darkstar kernel: [ 3.717980] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Oct 29 15:08:32 darkstar kernel: [ 3.728432] usb usb6: Product: UHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 3.738725] usb usb6: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 uhci_hcd
> Oct 29 15:08:32 darkstar kernel: [ 3.749227] usb usb6: SerialNumber: 0000:00:1d.0
> Oct 29 15:08:32 darkstar kernel: [ 3.759744] sda5
> Oct 29 15:08:32 darkstar kernel: [ 3.759936] usb usb6: configuration #1 chosen from 1 choice
> Oct 29 15:08:32 darkstar kernel: [ 3.780577] hub 6-0:1.0: USB hub found
> Oct 29 15:08:32 darkstar kernel: [ 3.790864] hub 6-0:1.0: 2 ports detected
> Oct 29 15:08:32 darkstar kernel: [ 3.801175] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> Oct 29 15:08:32 darkstar kernel: [ 3.811517] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> Oct 29 15:08:32 darkstar kernel: [ 3.811523] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 3.821680] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
> Oct 29 15:08:32 darkstar kernel: [ 3.831928] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
> Oct 29 15:08:32 darkstar kernel: [ 3.842070] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
> Oct 29 15:08:32 darkstar kernel: [ 3.852336] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Oct 29 15:08:32 darkstar kernel: [ 3.862506] usb usb7: Product: UHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 3.872556] usb usb7: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 uhci_hcd
> Oct 29 15:08:32 darkstar kernel: [ 3.882704] usb usb7: SerialNumber: 0000:00:1d.1
> Oct 29 15:08:32 darkstar kernel: [ 3.893017] usb usb7: configuration #1 chosen from 1 choice
> Oct 29 15:08:32 darkstar kernel: [ 3.903360] hub 7-0:1.0: USB hub found
> Oct 29 15:08:32 darkstar kernel: [ 3.913514] hub 7-0:1.0: 2 ports detected
> Oct 29 15:08:32 darkstar kernel: [ 3.923668] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
> Oct 29 15:08:32 darkstar kernel: [ 3.933900] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> Oct 29 15:08:32 darkstar kernel: [ 3.933906] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 3.944027] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
> Oct 29 15:08:32 darkstar kernel: [ 3.954264] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
> Oct 29 15:08:32 darkstar kernel: [ 3.964387] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
> Oct 29 15:08:32 darkstar kernel: [ 3.974574] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Oct 29 15:08:32 darkstar kernel: [ 3.984724] usb usb8: Product: UHCI Host Controller
> Oct 29 15:08:32 darkstar kernel: [ 3.994775] usb usb8: Manufacturer: Linux 2.6.32-rc5-00081-g964fe08 uhci_hcd
> Oct 29 15:08:32 darkstar kernel: [ 4.004946] usb usb8: SerialNumber: 0000:00:1d.2
> Oct 29 15:08:32 darkstar kernel: [ 4.015031] sda6
> Oct 29 15:08:32 darkstar kernel: [ 4.015363] usb usb8: configuration #1 chosen from 1 choice
> Oct 29 15:08:32 darkstar kernel: [ 4.035532] hub 8-0:1.0: USB hub found
> Oct 29 15:08:32 darkstar kernel: [ 4.045674] hub 8-0:1.0: 2 ports detected
> Oct 29 15:08:32 darkstar kernel: [ 4.055871] Initializing USB Mass Storage driver...
> Oct 29 15:08:32 darkstar kernel: [ 4.065990] usbcore: registered new interface driver usb-storage
> Oct 29 15:08:32 darkstar kernel: [ 4.076095] USB Mass Storage support registered.
> Oct 29 15:08:32 darkstar kernel: [ 4.086460] usbcore: registered new interface driver libusual
> Oct 29 15:08:32 darkstar kernel: [ 4.096753] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> Oct 29 15:08:32 darkstar kernel: [ 4.107118] drivers/input/serio/i8042.c: 25 <- i8042 (flush, kbd) [3]
> Oct 29 15:08:32 darkstar kernel: [ 4.107251] drivers/input/serio/i8042.c: 20 -> i8042 (command) [3]
> Oct 29 15:08:32 darkstar kernel: [ 4.107260] drivers/input/serio/i8042.c: 1f <- i8042 (return) [3]
> Oct 29 15:08:32 darkstar kernel: [ 4.107265] i8042.c: Warning: Keylock active.
> Oct 29 15:08:32 darkstar kernel: [ 4.117378] drivers/input/serio/i8042.c: 60 -> i8042 (command) [6]
> Oct 29 15:08:32 darkstar kernel: [ 4.117437] drivers/input/serio/i8042.c: 1e -> i8042 (parameter) [6]
> Oct 29 15:08:32 darkstar kernel: [ 4.117497] drivers/input/serio/i8042.c: 65 <- i8042 (flush, kbd) [6]
> Oct 29 15:08:32 darkstar kernel: [ 4.117557] drivers/input/serio/i8042.c: d3 -> i8042 (command) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.117668] drivers/input/serio/i8042.c: 5a -> i8042 (parameter) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.117992] drivers/input/serio/i8042.c: 5a <- i8042 (return) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.118003] drivers/input/serio/i8042.c: a7 -> i8042 (command) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.118061] drivers/input/serio/i8042.c: 20 -> i8042 (command) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.118383] drivers/input/serio/i8042.c: 3e <- i8042 (return) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.118388] drivers/input/serio/i8042.c: a8 -> i8042 (command) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.118445] drivers/input/serio/i8042.c: 20 -> i8042 (command) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.118768] drivers/input/serio/i8042.c: 1e <- i8042 (return) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.118773] drivers/input/serio/i8042.c: 60 -> i8042 (command) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.118832] drivers/input/serio/i8042.c: 3c -> i8042 (parameter) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.118998] drivers/input/serio/i8042.c: d3 -> i8042 (command) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.119110] drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.119434] drivers/input/serio/i8042.c: f0 <- i8042 (return) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.119439] drivers/input/serio/i8042.c: d3 -> i8042 (command) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.119498] drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.119770] drivers/input/serio/i8042.c: 56 <- i8042 (return) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.119775] drivers/input/serio/i8042.c: d3 -> i8042 (command) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.119834] drivers/input/serio/i8042.c: a4 -> i8042 (parameter) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.120159] drivers/input/serio/i8042.c: a4 <- i8042 (return) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.120194] drivers/input/serio/i8042.c: 60 -> i8042 (command) [7]
> Oct 29 15:08:32 darkstar kernel: [ 4.122915] drivers/input/serio/i8042.c: 1e -> i8042 (parameter) [8]
> Oct 29 15:08:32 darkstar kernel: [ 4.123043] drivers/input/serio/i8042.c: 60 -> i8042 (command) [8]
> Oct 29 15:08:32 darkstar kernel: [ 4.123154] drivers/input/serio/i8042.c: 0f -> i8042 (parameter) [8]
> Oct 29 15:08:32 darkstar kernel: [ 4.123160] serio: i8042 KBD port at 0x60,0x64 irq 1
> Oct 29 15:08:32 darkstar kernel: [ 4.123464] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [8]
> Oct 29 15:08:32 darkstar kernel: [ 4.133281] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [11]
> Oct 29 15:08:32 darkstar kernel: [ 4.133325] serio: i8042 AUX port at 0x60,0x64 irq 12
> Oct 29 15:08:32 darkstar kernel: [ 4.133411] drivers/input/serio/i8042.c: 1e <- i8042 (interrupt, 0, 1) [11]
> Oct 29 15:08:32 darkstar kernel: [ 4.143256] drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, 0, 1) [14]
> Oct 29 15:08:32 darkstar kernel: [ 4.143385] drivers/input/serio/i8042.c: 26 <- i8042 (interrupt, 0, 1) [14]
> Oct 29 15:08:32 darkstar kernel: [ 4.143527] drivers/input/serio/i8042.c: 25 <- i8042 (interrupt, 0, 1) [14]
> Oct 29 15:08:32 darkstar kernel: [ 4.143662] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [14]
> Oct 29 15:08:32 darkstar kernel: [ 4.143670] mice: PS/2 mouse device common for all mice
> Oct 29 15:08:32 darkstar kernel: [ 4.153624] drivers/input/serio/i8042.c: a6 <- i8042 (interrupt, 0, 1) [17]
> Oct 29 15:08:32 darkstar kernel: [ 4.153754] drivers/input/serio/i8042.c: 21 <- i8042 (interrupt, 0, 1) [17]
> Oct 29 15:08:32 darkstar kernel: [ 4.153937] drivers/input/serio/i8042.c: 24 <- i8042 (interrupt, 0, 1) [17]
> Oct 29 15:08:32 darkstar kernel: [ 4.154696] drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [18]
> Oct 29 15:08:32 darkstar kernel: [ 4.154826] Driver 'rtc_cmos' needs updating - please use bus_type methods
> Oct 29 15:08:32 darkstar kernel: [ 4.154947] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [18]
> Oct 29 15:08:32 darkstar kernel: [ 4.164935] drivers/input/serio/i8042.c: ab <- i8042 (interrupt, 0, 1) [21]
> Oct 29 15:08:32 darkstar kernel: [ 4.165054] rtc_cmos 00:03: RTC can wake from S4
> Oct 29 15:08:32 darkstar kernel: [ 4.165068] drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, 0, 1) [21]
> Oct 29 15:08:32 darkstar kernel: [ 4.165086] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [21]
> Oct 29 15:08:32 darkstar kernel: [ 4.175208] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [24]
> Oct 29 15:08:32 darkstar kernel: [ 4.175226] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [24]
> Oct 29 15:08:32 darkstar kernel: [ 4.175345] drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, 0, 1) [24]
> Oct 29 15:08:32 darkstar kernel: [ 4.175471] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
> Oct 29 15:08:32 darkstar kernel: [ 4.185639] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [27]
> Oct 29 15:08:32 darkstar kernel: [ 4.185661] drivers/input/serio/i8042.c: f3 -> i8042 (kbd-data) [27]
> Oct 29 15:08:32 darkstar kernel: [ 4.185698] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
> Oct 29 15:08:32 darkstar kernel: [ 4.185957] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [27]
> Oct 29 15:08:32 darkstar kernel: [ 4.185972] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [27]
> Oct 29 15:08:32 darkstar kernel: [ 4.195933] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [30]
> Oct 29 15:08:32 darkstar kernel: [ 4.195955] drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [30]
> Oct 29 15:08:32 darkstar kernel: [ 4.196035] i2c /dev entries driver
> Oct 29 15:08:32 darkstar kernel: [ 4.197044] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [30]
> Oct 29 15:08:32 darkstar kernel: [ 4.197497] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
> Oct 29 15:08:32 darkstar kernel: [ 4.197766] drivers/input/serio/i8042.c: d4 -> i8042 (command) [31]
> Oct 29 15:08:32 darkstar kernel: [ 4.197825] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [31]
> Oct 29 15:08:32 darkstar kernel: [ 4.216640] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [36]
> Oct 29 15:08:32 darkstar kernel: [ 4.216785] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [36]
> Oct 29 15:08:32 darkstar kernel: [ 4.216818] drivers/input/serio/i8042.c: 60 -> i8042 (command) [36]
> Oct 29 15:08:32 darkstar kernel: [ 4.216878] drivers/input/serio/i8042.c: 0d -> i8042 (parameter) [36]
> Oct 29 15:08:32 darkstar kernel: [ 4.216988] drivers/input/serio/i8042.c: 60 -> i8042 (command) [36]
> Oct 29 15:08:32 darkstar kernel: [ 4.217099] drivers/input/serio/i8042.c: 0f -> i8042 (parameter) [36]
> Oct 29 15:08:32 darkstar kernel: [ 4.217241] drivers/input/serio/i8042.c: d4 -> i8042 (command) [36]
> Oct 29 15:08:32 darkstar kernel: [ 4.217353] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [36]
> Oct 29 15:08:32 darkstar kernel: [ 4.218739] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> Oct 29 15:08:32 darkstar kernel: [ 4.220373] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [37]
> Oct 29 15:08:32 darkstar kernel: [ 4.229267] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [40]
> Oct 29 15:08:32 darkstar kernel: [ 4.229290] drivers/input/serio/i8042.c: d4 -> i8042 (command) [40]
> Oct 29 15:08:32 darkstar kernel: [ 4.229455] drivers/input/serio/i8042.c: f6 -> i8042 (parameter) [40]
> Oct 29 15:08:32 darkstar kernel: [ 4.229467] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [40]
> Oct 29 15:08:32 darkstar kernel: [ 4.229570] atkbd.c: Unknown key pressed (raw set 2, code 0x20 on isa0060/serio0).
> Oct 29 15:08:32 darkstar kernel: [ 4.232057] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [40]
> Oct 29 15:08:32 darkstar kernel: [ 4.232608] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
> Oct 29 15:08:32 darkstar kernel: [ 4.250787] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [47]
> Oct 29 15:08:32 darkstar kernel: [ 4.250794] atkbd.c: Unknown key pressed (raw set 2, code 0x1f on isa0060/serio0).
> Oct 29 15:08:32 darkstar kernel: [ 4.254107] atkbd.c: Use 'setkeycodes 1f <keycode>' to make it known.
> Oct 29 15:08:32 darkstar kernel: [ 4.272408] sda7
> Oct 29 15:08:32 darkstar kernel: [ 4.272598] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04
> Oct 29 15:08:32 darkstar kernel: [ 4.272602] async/1 used greatest stack depth: 6128 bytes left
> Oct 29 15:08:32 darkstar kernel: [ 4.272704] drivers/input/serio/i8042.c: d4 -> i8042 (command) [53]
> Oct 29 15:08:32 darkstar kernel: [ 4.272763] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [53]
> Oct 29 15:08:32 darkstar kernel: [ 4.273045] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [53]
> Oct 29 15:08:32 darkstar kernel: [ 4.273062] drivers/input/serio/i8042.c: d4 -> i8042 (command) [53]
> Oct 29 15:08:32 darkstar kernel: [ 4.273121] drivers/input/serio/i8042.c: 0a -> i8042 (parameter) [53]
> Oct 29 15:08:32 darkstar kernel: [ 4.304310] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [63]
> Oct 29 15:08:32 darkstar kernel: [ 4.304334] drivers/input/serio/i8042.c: d4 -> i8042 (command) [63]
> Oct 29 15:08:32 darkstar kernel: [ 4.304393] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [63]
> Oct 29 15:08:32 darkstar kernel: [ 4.304575] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
> Oct 29 15:08:32 darkstar kernel: [ 4.304733] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [63]
> Oct 29 15:08:32 darkstar kernel: [ 4.304749] drivers/input/serio/i8042.c: d4 -> i8042 (command) [63]
> Oct 29 15:08:32 darkstar kernel: [ 4.304807] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [63]
> Oct 29 15:08:32 darkstar kernel: [ 4.315406] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [66]
> Oct 29 15:08:32 darkstar kernel: [ 4.315429] drivers/input/serio/i8042.c: d4 -> i8042 (command) [66]
> Oct 29 15:08:32 darkstar kernel: [ 4.315540] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [66]
> Oct 29 15:08:32 darkstar kernel: [ 4.315726] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
> Oct 29 15:08:32 darkstar kernel: [ 4.315835] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [66]
> Oct 29 15:08:32 darkstar kernel: [ 4.315850] drivers/input/serio/i8042.c: d4 -> i8042 (command) [66]
> Oct 29 15:08:32 darkstar kernel: [ 4.315909] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [66]
> Oct 29 15:08:32 darkstar kernel: [ 4.326568] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [69]
> Oct 29 15:08:32 darkstar kernel: [ 4.326591] drivers/input/serio/i8042.c: d4 -> i8042 (command) [69]
> Oct 29 15:08:32 darkstar kernel: [ 4.326755] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [69]
> Oct 29 15:08:32 darkstar kernel: [ 4.326767] drivers/input/serio/i8042.c: 25 <- i8042 (interrupt, 0, 1) [69]
> Oct 29 15:08:32 darkstar kernel: [ 4.326783] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> Oct 29 15:08:32 darkstar kernel: [ 4.337663] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [73]
> Oct 29 15:08:32 darkstar kernel: [ 4.337682] drivers/input/serio/i8042.c: d4 -> i8042 (command) [73]
> Oct 29 15:08:32 darkstar kernel: [ 4.337692] iTCO_vendor_support: vendor-support=0
> Oct 29 15:08:32 darkstar kernel: [ 4.337846] drivers/input/serio/i8042.c: 3c -> i8042 (parameter) [73]
> Oct 29 15:08:32 darkstar kernel: [ 4.337858] drivers/input/serio/i8042.c: a4 <- i8042 (interrupt, 0, 1) [73]
> Oct 29 15:08:32 darkstar kernel: [ 4.337871] atkbd.c: Unknown key pressed (raw set 2, code 0x124 on isa0060/serio0).
> Oct 29 15:08:32 darkstar kernel: [ 4.337874] atkbd.c: Use 'setkeycodes 24 <keycode>' to make it known.
> Oct 29 15:08:32 darkstar kernel: [ 4.370530] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [82]
> Oct 29 15:08:32 darkstar kernel: [ 4.370552] drivers/input/serio/i8042.c: d4 -> i8042 (command) [82]
> Oct 29 15:08:32 darkstar kernel: [ 4.370717] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [82]
> Oct 29 15:08:32 darkstar kernel: [ 4.370729] drivers/input/serio/i8042.c: a1 <- i8042 (interrupt, 0, 1) [82]
> Oct 29 15:08:32 darkstar kernel: [ 4.370743] atkbd.c: Unknown key pressed (raw set 2, code 0x121 on isa0060/serio0).
> Oct 29 15:08:32 darkstar kernel: [ 4.371011] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [82]
> Oct 29 15:08:32 darkstar kernel: [ 4.371197] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
> Oct 29 15:08:32 darkstar kernel: [ 4.371429] device-mapper: dm-log-userspace: version 1.0.0 loaded
> Oct 29 15:08:32 darkstar kernel: [ 4.372402] cpuidle: using governor ladder
> Oct 29 15:08:32 darkstar kernel: [ 4.373871] atkbd.c: Use 'setkeycodes 21 <keycode>' to make it known.
> Oct 29 15:08:32 darkstar kernel: [ 4.426476] drivers/input/serio/i8042.c: 26 <- i8042 (interrupt, 0, 1) [99]
> Oct 29 15:08:32 darkstar kernel: [ 4.426518] drivers/input/serio/i8042.c: d4 -> i8042 (command) [99]
> Oct 29 15:08:32 darkstar kernel: [ 4.428191] cpuidle: using governor menu
> Oct 29 15:08:32 darkstar kernel: [ 4.429084] drivers/input/serio/i8042.c: 28 -> i8042 (parameter) [99]
> Oct 29 15:08:32 darkstar kernel: [ 4.434432] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [100]
> Oct 29 15:08:32 darkstar kernel: [ 4.434478] drivers/input/serio/i8042.c: d4 -> i8042 (command) [102]
> Oct 29 15:08:32 darkstar kernel: [ 4.434641] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [102]
> Oct 29 15:08:32 darkstar kernel: [ 4.439332] drivers/input/serio/i8042.c: a6 <- i8042 (interrupt, 0, 1) [102]
> Oct 29 15:08:32 darkstar kernel: [ 4.439347] atkbd.c: Unknown key pressed (raw set 2, code 0x126 on isa0060/serio0).
> Oct 29 15:08:32 darkstar kernel: [ 4.439349] atkbd.c: Use 'setkeycodes 26 <keycode>' to make it known.
> Oct 29 15:08:32 darkstar kernel: [ 4.439654] sdhci: Secure Digital Host Controller Interface driver
> Oct 29 15:08:32 darkstar kernel: [ 4.439656] sdhci: Copyright(c) Pierre Ossman
> Oct 29 15:08:32 darkstar kernel: [ 4.439707] sdhci-pci 0000:02:01.2: SDHCI controller found [1180:0822] (rev 21)
> Oct 29 15:08:32 darkstar kernel: [ 4.439735] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> Oct 29 15:08:32 darkstar kernel: [ 4.442116] Registered led device: mmc0::
> Oct 29 15:08:32 darkstar kernel: [ 4.443389] mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA
> Oct 29 15:08:32 darkstar kernel: [ 4.443641] wbsd: Winbond W83L51xD SD/MMC card interface driver
> Oct 29 15:08:32 darkstar kernel: [ 4.443644] wbsd: Copyright(c) Pierre Ossman
> Oct 29 15:08:32 darkstar kernel: [ 4.444232] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
> Oct 29 15:08:32 darkstar kernel: [ 4.447550] usbcore: registered new interface driver hiddev
> Oct 29 15:08:32 darkstar kernel: [ 4.447680] usbcore: registered new interface driver usbhid
> Oct 29 15:08:32 darkstar kernel: [ 4.447685] usbhid: v2.6:USB HID core driver
> Oct 29 15:08:32 darkstar kernel: [ 4.447900] Advanced Linux Sound Architecture Driver Version 1.0.21.
> Oct 29 15:08:32 darkstar kernel: [ 4.447902] ALSA device list:
> Oct 29 15:08:32 darkstar kernel: [ 4.447904] No soundcards found.
> Oct 29 15:08:32 darkstar kernel: [ 4.447907] Netfilter messages via NETLINK v0.30.
> Oct 29 15:08:32 darkstar kernel: [ 4.447987] nf_conntrack version 0.5.0 (15347 buckets, 61388 max)
> Oct 29 15:08:32 darkstar kernel: [ 4.448841] ctnetlink v0.93: registering with nfnetlink.
> Oct 29 15:08:32 darkstar kernel: [ 4.450911] ip_tables: (C) 2000-2006 Netfilter Core Team
> Oct 29 15:08:32 darkstar kernel: [ 4.450992] TCP cubic registered
> Oct 29 15:08:32 darkstar kernel: [ 4.450997] NET: Registered protocol family 17
> Oct 29 15:08:32 darkstar kernel: [ 4.451028] lib80211: common routines for IEEE802.11 drivers
> Oct 29 15:08:32 darkstar kernel: [ 4.451041] lib80211_crypt: registered algorithm 'NULL'
> Oct 29 15:08:32 darkstar kernel: [ 4.463024] Using IPI No-Shortcut mode
> Oct 29 15:08:32 darkstar kernel: [ 4.463687] PM: Checking image partition /dev/sda8
> Oct 29 15:08:32 darkstar kernel: [ 4.463733] PM: Resume from partition 8:8
> Oct 29 15:08:32 darkstar kernel: [ 4.463735] PM: Checking hibernation image.
> Oct 29 15:08:32 darkstar kernel: [ 4.473031] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [110]
> Oct 29 15:08:32 darkstar kernel: [ 4.473047] atkbd.c: Unknown key pressed (raw set 2, code 0x120 on isa0060/serio0).
> Oct 29 15:08:32 darkstar kernel: [ 4.473049] atkbd.c: Use 'setkeycodes 20 <keycode>' to make it known.
> Oct 29 15:08:32 darkstar kernel: [ 4.511209] sda8 >
> Oct 29 15:08:32 darkstar kernel: [ 4.715234] drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, 0, 1) [186]
> Oct 29 15:08:32 darkstar kernel: [ 4.715242] atkbd.c: Unknown key pressed (raw set 2, code 0x125 on isa0060/serio0).
> Oct 29 15:08:32 darkstar kernel: [ 4.715244] atkbd.c: Use 'setkeycodes 25 <keycode>' to make it known.
> Oct 29 15:08:32 darkstar kernel: [ 4.716589] drivers/input/serio/i8042.c: d4 -> i8042 (command) [186]
> Oct 29 15:08:32 darkstar kernel: [ 4.716649] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [186]
> Oct 29 15:08:32 darkstar kernel: [ 4.783675] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [207]
> Oct 29 15:08:32 darkstar kernel: [ 4.783683] atkbd.c: Unknown key pressed (raw set 2, code 0x11f on isa0060/serio0).
> Oct 29 15:08:32 darkstar kernel: [ 4.783685] atkbd.c: Use 'setkeycodes 1f <keycode>' to make it known.
> Oct 29 15:08:32 darkstar kernel: [ 4.913583] drivers/input/serio/i8042.c: d4 -> i8042 (command) [246]
> Oct 29 15:08:32 darkstar kernel: [ 4.956571] PM: Resume from disk failed.
> Oct 29 15:08:32 darkstar kernel: [ 4.956677] registered taskstats version 1
> Oct 29 15:08:32 darkstar kernel: [ 4.979979] sd 0:0:0:0: [sda] Attached SCSI disk
> Oct 29 15:08:32 darkstar kernel: [ 5.004842] Magic number: 13:858:134
> Oct 29 15:08:32 darkstar kernel: [ 5.027235] acpi device:09: hash matches
> Oct 29 15:08:32 darkstar kernel: [ 5.049367] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
> Oct 29 15:08:32 darkstar kernel: [ 5.072385] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [258]
> Oct 29 15:08:32 darkstar kernel: [ 5.319685] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [367]
> Oct 29 15:08:32 darkstar kernel: [ 5.319755] drivers/input/serio/i8042.c: d4 -> i8042 (command) [367]
> Oct 29 15:08:32 darkstar kernel: [ 5.322450] drivers/input/serio/i8042.c: 3c -> i8042 (parameter) [367]
> Oct 29 15:08:32 darkstar kernel: [ 5.330489] drivers/input/serio/i8042.c: 9e <- i8042 (interrupt, 0, 1) [370]
> Oct 29 15:08:32 darkstar kernel: [ 5.330576] atkbd.c: Unknown key pressed (raw set 2, code 0x11e on isa0060/serio0).
> Oct 29 15:08:32 darkstar kernel: [ 5.333797] atkbd.c: Use 'setkeycodes 1e <keycode>' to make it known.
> Oct 29 15:08:32 darkstar kernel: [ 5.520261] drivers/input/serio/i8042.c: d4 -> i8042 (command) [428]
> Oct 29 15:08:32 darkstar kernel: [ 5.523457] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [486]
> Oct 29 15:08:32 darkstar kernel: [ 5.839759] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [523]
> Oct 29 15:08:32 darkstar kernel: [ 5.839792] drivers/input/serio/i8042.c: d4 -> i8042 (command) [523]
> Oct 29 15:08:32 darkstar kernel: [ 5.842149] drivers/input/serio/i8042.c: 28 -> i8042 (parameter) [524]
> Oct 29 15:08:32 darkstar kernel: [ 5.847357] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [526]
> Oct 29 15:08:32 darkstar kernel: [ 5.847398] drivers/input/serio/i8042.c: d4 -> i8042 (command) [526]
> Oct 29 15:08:32 darkstar kernel: [ 5.847514] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [526]
> Oct 29 15:08:32 darkstar kernel: [ 5.847894] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [526]
> Oct 29 15:08:32 darkstar kernel: [ 5.847929] drivers/input/serio/i8042.c: d4 -> i8042 (command) [526]
> Oct 29 15:08:32 darkstar kernel: [ 5.847991] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [526]
> Oct 29 15:08:32 darkstar kernel: [ 5.853332] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [527]
> Oct 29 15:08:32 darkstar kernel: [ 5.853374] drivers/input/serio/i8042.c: d4 -> i8042 (command) [528]
> Oct 29 15:08:32 darkstar kernel: [ 5.853435] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [528]
> Oct 29 15:08:32 darkstar kernel: [ 5.853865] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [528]
> Oct 29 15:08:32 darkstar kernel: [ 5.853899] drivers/input/serio/i8042.c: d4 -> i8042 (command) [528]
> Oct 29 15:08:32 darkstar kernel: [ 5.853960] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [528]
> Oct 29 15:08:32 darkstar kernel: [ 5.859306] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [529]
> Oct 29 15:08:32 darkstar kernel: [ 5.859347] drivers/input/serio/i8042.c: d4 -> i8042 (command) [529]
> Oct 29 15:08:32 darkstar kernel: [ 5.859408] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [529]
> Oct 29 15:08:32 darkstar kernel: [ 5.862548] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [530]
> Oct 29 15:08:32 darkstar kernel: [ 5.863755] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [531]
> Oct 29 15:08:32 darkstar kernel: [ 5.863796] drivers/input/serio/i8042.c: d4 -> i8042 (command) [531]
> Oct 29 15:08:32 darkstar kernel: [ 5.863857] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [531]
> Oct 29 15:08:32 darkstar kernel: [ 5.864236] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [531]
> Oct 29 15:08:32 darkstar kernel: [ 5.864269] drivers/input/serio/i8042.c: d4 -> i8042 (command) [531]
> Oct 29 15:08:32 darkstar kernel: [ 5.864331] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [531]
> Oct 29 15:08:32 darkstar kernel: [ 5.869766] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [532]
> Oct 29 15:08:32 darkstar kernel: [ 5.869806] drivers/input/serio/i8042.c: d4 -> i8042 (command) [532]
> Oct 29 15:08:32 darkstar kernel: [ 5.869867] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [532]
> Oct 29 15:08:32 darkstar kernel: [ 5.870251] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [533]
> Oct 29 15:08:32 darkstar kernel: [ 5.870284] drivers/input/serio/i8042.c: d4 -> i8042 (command) [533]
> Oct 29 15:08:32 darkstar kernel: [ 5.870346] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [533]
> Oct 29 15:08:32 darkstar kernel: [ 5.875813] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [534]
> Oct 29 15:08:32 darkstar kernel: [ 5.875853] drivers/input/serio/i8042.c: d4 -> i8042 (command) [534]
> Oct 29 15:08:32 darkstar kernel: [ 5.875914] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [534]
> Oct 29 15:08:32 darkstar kernel: [ 5.876297] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [534]
> Oct 29 15:08:32 darkstar kernel: [ 5.876330] drivers/input/serio/i8042.c: d4 -> i8042 (command) [534]
> Oct 29 15:08:32 darkstar kernel: [ 5.876391] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [534]
> Oct 29 15:08:32 darkstar kernel: [ 5.881873] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [536]
> Oct 29 15:08:32 darkstar kernel: [ 5.881913] drivers/input/serio/i8042.c: d4 -> i8042 (command) [536]
> Oct 29 15:08:32 darkstar kernel: [ 5.881975] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [536]
> Oct 29 15:08:32 darkstar kernel: [ 5.882340] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [536]
> Oct 29 15:08:32 darkstar kernel: [ 5.882374] drivers/input/serio/i8042.c: d4 -> i8042 (command) [536]
> Oct 29 15:08:32 darkstar kernel: [ 5.882435] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [536]
> Oct 29 15:08:32 darkstar kernel: [ 5.887905] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [538]
> Oct 29 15:08:32 darkstar kernel: [ 5.887945] drivers/input/serio/i8042.c: d4 -> i8042 (command) [538]
> Oct 29 15:08:32 darkstar kernel: [ 5.888007] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [538]
> Oct 29 15:08:32 darkstar kernel: [ 5.891177] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [539]
> Oct 29 15:08:32 darkstar kernel: [ 5.894188] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [540]
> Oct 29 15:08:32 darkstar kernel: [ 5.894315] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [540]
> Oct 29 15:08:32 darkstar kernel: [ 5.894538] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, 1, 12) [540]
> Oct 29 15:08:32 darkstar kernel: [ 5.894577] drivers/input/serio/i8042.c: d4 -> i8042 (command) [540]
> Oct 29 15:08:32 darkstar kernel: [ 5.894638] drivers/input/serio/i8042.c: f6 -> i8042 (parameter) [540]
> Oct 29 15:08:32 darkstar kernel: [ 5.897753] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [541]
> Oct 29 15:08:32 darkstar kernel: [ 5.897793] drivers/input/serio/i8042.c: d4 -> i8042 (command) [541]
> Oct 29 15:08:32 darkstar kernel: [ 5.897855] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [541]
> Oct 29 15:08:32 darkstar kernel: [ 5.898230] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [541]
> Oct 29 15:08:32 darkstar kernel: [ 5.898264] drivers/input/serio/i8042.c: d4 -> i8042 (command) [541]
> Oct 29 15:08:32 darkstar kernel: [ 5.898326] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [541]
> Oct 29 15:08:32 darkstar kernel: [ 5.903804] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [543]
> Oct 29 15:08:32 darkstar kernel: [ 5.903844] drivers/input/serio/i8042.c: d4 -> i8042 (command) [543]
> Oct 29 15:08:32 darkstar kernel: [ 5.903905] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [543]
> Oct 29 15:08:32 darkstar kernel: [ 5.907069] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [544]
> Oct 29 15:08:32 darkstar kernel: [ 5.907109] drivers/input/serio/i8042.c: d4 -> i8042 (command) [544]
> Oct 29 15:08:32 darkstar kernel: [ 5.907170] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [544]
> Oct 29 15:08:32 darkstar kernel: [ 5.909865] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [544]
> Oct 29 15:08:32 darkstar kernel: [ 5.909905] drivers/input/serio/i8042.c: d4 -> i8042 (command) [544]
> Oct 29 15:08:32 darkstar kernel: [ 5.909966] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [544]
> Oct 29 15:08:32 darkstar kernel: [ 5.913103] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [545]
> Oct 29 15:08:32 darkstar kernel: [ 5.913143] drivers/input/serio/i8042.c: d4 -> i8042 (command) [545]
> Oct 29 15:08:32 darkstar kernel: [ 5.913204] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [545]
> Oct 29 15:08:32 darkstar kernel: [ 5.916550] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [546]
> Oct 29 15:08:32 darkstar kernel: [ 5.919557] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [547]
> Oct 29 15:08:32 darkstar kernel: [ 5.919719] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [547]
> Oct 29 15:08:32 darkstar kernel: [ 5.919932] drivers/input/serio/i8042.c: 64 <- i8042 (interrupt, 1, 12) [547]
> Oct 29 15:08:32 darkstar kernel: [ 5.919971] drivers/input/serio/i8042.c: d4 -> i8042 (command) [547]
> Oct 29 15:08:32 darkstar kernel: [ 5.920032] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [547]
> Oct 29 15:08:32 darkstar kernel: [ 5.920396] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [548]
> Oct 29 15:08:32 darkstar kernel: [ 5.920430] drivers/input/serio/i8042.c: d4 -> i8042 (command) [548]
> Oct 29 15:08:32 darkstar kernel: [ 5.920491] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [548]
> Oct 29 15:08:32 darkstar kernel: [ 5.925916] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [549]
> Oct 29 15:08:32 darkstar kernel: [ 5.925956] drivers/input/serio/i8042.c: d4 -> i8042 (command) [549]
> Oct 29 15:08:32 darkstar kernel: [ 5.926018] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [549]
> Oct 29 15:08:32 darkstar kernel: [ 5.929179] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [550]
> Oct 29 15:08:32 darkstar kernel: [ 5.929219] drivers/input/serio/i8042.c: d4 -> i8042 (command) [550]
> Oct 29 15:08:32 darkstar kernel: [ 5.929281] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [550]
> Oct 29 15:08:32 darkstar kernel: [ 5.932607] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [551]
> Oct 29 15:08:32 darkstar kernel: [ 5.932647] drivers/input/serio/i8042.c: d4 -> i8042 (command) [551]
> Oct 29 15:08:32 darkstar kernel: [ 5.932708] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [551]
> Oct 29 15:08:32 darkstar kernel: [ 5.936036] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [552]
> Oct 29 15:08:32 darkstar kernel: [ 5.936076] drivers/input/serio/i8042.c: d4 -> i8042 (command) [552]
> Oct 29 15:08:32 darkstar kernel: [ 5.936137] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [552]
> Oct 29 15:08:32 darkstar kernel: [ 5.939444] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [553]
> Oct 29 15:08:32 darkstar kernel: [ 5.942512] drivers/input/serio/i8042.c: 73 <- i8042 (interrupt, 1, 12) [554]
> Oct 29 15:08:32 darkstar kernel: [ 5.942673] drivers/input/serio/i8042.c: 02 <- i8042 (interrupt, 1, 12) [554]
> Oct 29 15:08:32 darkstar kernel: [ 5.942886] drivers/input/serio/i8042.c: 50 <- i8042 (interrupt, 1, 12) [554]
> Oct 29 15:08:32 darkstar kernel: [ 5.942933] drivers/input/serio/i8042.c: d4 -> i8042 (command) [554]
> Oct 29 15:08:32 darkstar kernel: [ 5.942995] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [554]
> Oct 29 15:08:32 darkstar kernel: [ 5.943347] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [555]
> Oct 29 15:08:32 darkstar kernel: [ 5.943381] drivers/input/serio/i8042.c: d4 -> i8042 (command) [555]
> Oct 29 15:08:32 darkstar kernel: [ 5.943442] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [555]
> Oct 29 15:08:32 darkstar kernel: [ 5.948979] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [556]
> Oct 29 15:08:32 darkstar kernel: [ 5.949020] drivers/input/serio/i8042.c: d4 -> i8042 (command) [556]
> Oct 29 15:08:32 darkstar kernel: [ 5.949081] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [556]
> Oct 29 15:08:32 darkstar kernel: [ 5.952244] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [557]
> Oct 29 15:08:32 darkstar kernel: [ 5.952284] drivers/input/serio/i8042.c: d4 -> i8042 (command) [557]
> Oct 29 15:08:32 darkstar kernel: [ 5.952345] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [557]
> Oct 29 15:08:32 darkstar kernel: [ 5.954432] async/0 used greatest stack depth: 6036 bytes left
> Oct 29 15:08:32 darkstar kernel: [ 5.955629] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [558]
> Oct 29 15:08:32 darkstar kernel: [ 5.955687] drivers/input/serio/i8042.c: d4 -> i8042 (command) [558]
> Oct 29 15:08:32 darkstar kernel: [ 5.955750] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [558]
> Oct 29 15:08:32 darkstar kernel: [ 5.959057] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [558]
> Oct 29 15:08:32 darkstar kernel: [ 5.959168] drivers/input/serio/i8042.c: d4 -> i8042 (command) [558]
> Oct 29 15:08:32 darkstar kernel: [ 5.959231] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [558]
> Oct 29 15:08:32 darkstar kernel: [ 5.976954] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [565]
> Oct 29 15:08:32 darkstar kernel: [ 5.977073] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [565]
> Oct 29 15:08:32 darkstar kernel: [ 5.977191] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [565]
> Oct 29 15:08:32 darkstar kernel: [ 5.977336] drivers/input/serio/i8042.c: 64 <- i8042 (interrupt, 1, 12) [565]
> Oct 29 15:08:32 darkstar kernel: [ 5.977370] drivers/input/serio/i8042.c: d4 -> i8042 (command) [565]
> Oct 29 15:08:32 darkstar kernel: [ 5.977431] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [565]
> Oct 29 15:08:32 darkstar kernel: [ 5.977798] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [565]
> Oct 29 15:08:32 darkstar kernel: [ 5.977826] drivers/input/serio/i8042.c: d4 -> i8042 (command) [565]
> Oct 29 15:08:32 darkstar kernel: [ 5.977888] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [565]
> Oct 29 15:08:32 darkstar kernel: [ 5.983314] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [566]
> Oct 29 15:08:32 darkstar kernel: [ 5.983369] drivers/input/serio/i8042.c: d4 -> i8042 (command) [566]
> Oct 29 15:08:32 darkstar kernel: [ 5.983430] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [566]
> Oct 29 15:08:32 darkstar kernel: [ 5.986598] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [567]
> Oct 29 15:08:32 darkstar kernel: [ 5.986633] drivers/input/serio/i8042.c: d4 -> i8042 (command) [567]
> Oct 29 15:08:32 darkstar kernel: [ 5.986694] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [567]
> Oct 29 15:08:32 darkstar kernel: [ 5.990039] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [568]
> Oct 29 15:08:32 darkstar kernel: [ 5.990150] drivers/input/serio/i8042.c: d4 -> i8042 (command) [568]
> Oct 29 15:08:32 darkstar kernel: [ 5.990214] drivers/input/serio/i8042.c: e7 -> i8042 (parameter) [568]
> Oct 29 15:08:32 darkstar kernel: [ 5.993986] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [569]
> Oct 29 15:08:32 darkstar kernel: [ 5.994064] drivers/input/serio/i8042.c: d4 -> i8042 (command) [569]
> Oct 29 15:08:32 darkstar kernel: [ 5.994128] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [569]
> Oct 29 15:08:32 darkstar kernel: [ 5.997399] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [570]
> Oct 29 15:08:32 darkstar kernel: [ 6.000394] drivers/input/serio/i8042.c: 73 <- i8042 (interrupt, 1, 12) [571]
> Oct 29 15:08:32 darkstar kernel: [ 6.000638] drivers/input/serio/i8042.c: 02 <- i8042 (interrupt, 1, 12) [571]
> Oct 29 15:08:32 darkstar kernel: [ 6.000855] drivers/input/serio/i8042.c: 50 <- i8042 (interrupt, 1, 12) [571]
> Oct 29 15:08:32 darkstar kernel: [ 6.000975] drivers/input/serio/i8042.c: d4 -> i8042 (command) [572]
> Oct 29 15:08:32 darkstar kernel: [ 6.001040] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [572]
> Oct 29 15:08:32 darkstar kernel: [ 6.004211] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [572]
> Oct 29 15:08:32 darkstar kernel: [ 6.007249] drivers/input/serio/i8042.c: 10 <- i8042 (interrupt, 1, 12) [574]
> Oct 29 15:08:32 darkstar kernel: [ 6.007387] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [574]
> Oct 29 15:08:32 darkstar kernel: [ 6.007641] drivers/input/serio/i8042.c: 64 <- i8042 (interrupt, 1, 12) [574]
> Oct 29 15:08:32 darkstar kernel: [ 6.007729] drivers/input/serio/i8042.c: d4 -> i8042 (command) [574]
> Oct 29 15:08:32 darkstar kernel: [ 6.007793] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [574]
> Oct 29 15:08:32 darkstar kernel: [ 6.010910] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [575]
> Oct 29 15:08:32 darkstar kernel: [ 6.010995] drivers/input/serio/i8042.c: d4 -> i8042 (command) [575]
> Oct 29 15:08:32 darkstar kernel: [ 6.011059] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [575]
> Oct 29 15:08:32 darkstar kernel: [ 6.014288] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [576]
> Oct 29 15:08:32 darkstar kernel: [ 6.014374] drivers/input/serio/i8042.c: d4 -> i8042 (command) [576]
> Oct 29 15:08:32 darkstar kernel: [ 6.014439] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [576]
> Oct 29 15:08:32 darkstar kernel: [ 6.014840] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [576]
> Oct 29 15:08:32 darkstar kernel: [ 6.014914] drivers/input/serio/i8042.c: d4 -> i8042 (command) [576]
> Oct 29 15:08:32 darkstar kernel: [ 6.014979] drivers/input/serio/i8042.c: 0a -> i8042 (parameter) [576]
> Oct 29 15:08:32 darkstar kernel: [ 6.020364] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [578]
> Oct 29 15:08:32 darkstar kernel: [ 6.020451] drivers/input/serio/i8042.c: d4 -> i8042 (command) [578]
> Oct 29 15:08:32 darkstar kernel: [ 6.020516] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [578]
> Oct 29 15:08:32 darkstar kernel: [ 6.023620] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [579]
> Oct 29 15:08:32 darkstar kernel: [ 6.023705] drivers/input/serio/i8042.c: d4 -> i8042 (command) [579]
> Oct 29 15:08:32 darkstar kernel: [ 6.023770] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [579]
> Oct 29 15:08:32 darkstar kernel: [ 6.026976] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [580]
> Oct 29 15:08:32 darkstar kernel: [ 6.027063] drivers/input/serio/i8042.c: d4 -> i8042 (command) [580]
> Oct 29 15:08:32 darkstar kernel: [ 6.027601] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [580]
> Oct 29 15:08:32 darkstar kernel: [ 6.030817] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [581]
> Oct 29 15:08:32 darkstar kernel: [ 6.030875] drivers/input/serio/i8042.c: d4 -> i8042 (command) [581]
> Oct 29 15:08:32 darkstar kernel: [ 6.030939] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [581]
> Oct 29 15:08:32 darkstar kernel: [ 6.034248] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [582]
> Oct 29 15:08:32 darkstar kernel: [ 6.037294] drivers/input/serio/i8042.c: 15 <- i8042 (interrupt, 1, 12) [583]
> Oct 29 15:08:32 darkstar kernel: [ 6.037432] drivers/input/serio/i8042.c: 01 <- i8042 (interrupt, 1, 12) [583]
> Oct 29 15:08:32 darkstar kernel: [ 6.037673] drivers/input/serio/i8042.c: 0a <- i8042 (interrupt, 1, 12) [583]
> Oct 29 15:08:32 darkstar kernel: [ 6.037760] drivers/input/serio/i8042.c: d4 -> i8042 (command) [583]
> Oct 29 15:08:32 darkstar kernel: [ 6.037824] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [583]
> Oct 29 15:08:32 darkstar kernel: [ 6.040942] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [584]
> Oct 29 15:08:32 darkstar kernel: [ 6.041029] drivers/input/serio/i8042.c: d4 -> i8042 (command) [584]
> Oct 29 15:08:32 darkstar kernel: [ 6.041094] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [584]
> Oct 29 15:08:32 darkstar kernel: [ 6.044325] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [585]
> Oct 29 15:08:32 darkstar kernel: [ 6.044411] drivers/input/serio/i8042.c: d4 -> i8042 (command) [585]
> Oct 29 15:08:32 darkstar kernel: [ 6.044475] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [585]
> Oct 29 15:08:32 darkstar kernel: [ 6.047695] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [586]
> Oct 29 15:08:32 darkstar kernel: [ 6.047781] drivers/input/serio/i8042.c: d4 -> i8042 (command) [586]
> Oct 29 15:08:32 darkstar kernel: [ 6.047846] drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [586]
> Oct 29 15:08:32 darkstar kernel: [ 6.051075] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [587]
> Oct 29 15:08:32 darkstar kernel: [ 6.051161] drivers/input/serio/i8042.c: d4 -> i8042 (command) [587]
> Oct 29 15:08:32 darkstar kernel: [ 6.051225] drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [587]
> Oct 29 15:08:32 darkstar kernel: [ 6.054427] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [588]
> Oct 29 15:08:32 darkstar kernel: [ 6.054516] drivers/input/serio/i8042.c: d4 -> i8042 (command) [588]
> Oct 29 15:08:32 darkstar kernel: [ 6.054580] drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [588]
> Oct 29 15:08:32 darkstar kernel: [ 6.057823] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [589]
> Oct 29 15:08:32 darkstar kernel: [ 6.057908] drivers/input/serio/i8042.c: d4 -> i8042 (command) [589]
> Oct 29 15:08:32 darkstar kernel: [ 6.057973] drivers/input/serio/i8042.c: ea -> i8042 (parameter) [589]
> Oct 29 15:08:32 darkstar kernel: [ 6.061698] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [590]
> Oct 29 15:08:32 darkstar kernel: [ 6.062978] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
> Oct 29 15:08:32 darkstar kernel: [ 6.086920] drivers/input/serio/i8042.c: d4 -> i8042 (command) [598]
> Oct 29 15:08:32 darkstar kernel: [ 6.086986] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [598]
> Oct 29 15:08:32 darkstar kernel: [ 6.087282] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [598]
> Oct 29 15:08:32 darkstar kernel: [ 6.087325] drivers/input/serio/i8042.c: d4 -> i8042 (command) [598]
> Oct 29 15:08:32 darkstar kernel: [ 6.087390] drivers/input/serio/i8042.c: 64 -> i8042 (parameter) [598]
> Oct 29 15:08:32 darkstar kernel: [ 6.092777] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [599]
> Oct 29 15:08:32 darkstar kernel: [ 6.092861] drivers/input/serio/i8042.c: d4 -> i8042 (command) [599]
> Oct 29 15:08:32 darkstar kernel: [ 6.092925] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [599]
> Oct 29 15:08:32 darkstar kernel: [ 6.093316] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [599]
> Oct 29 15:08:32 darkstar kernel: [ 6.093426] drivers/input/serio/i8042.c: d4 -> i8042 (command) [600]
> Oct 29 15:08:32 darkstar kernel: [ 6.093491] drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [600]
> Oct 29 15:08:32 darkstar kernel: [ 6.098930] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [601]
> Oct 29 15:08:32 darkstar kernel: [ 6.099009] drivers/input/serio/i8042.c: d4 -> i8042 (command) [601]
> Oct 29 15:08:32 darkstar kernel: [ 6.099074] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [601]
> Oct 29 15:08:32 darkstar kernel: [ 6.102264] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [602]
> Oct 29 15:08:32 darkstar kernel: [ 6.102920] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
> Oct 29 15:08:32 darkstar kernel: [ 6.126546] drivers/input/serio/i8042.c: d4 -> i8042 (command) [609]
> Oct 29 15:08:32 darkstar kernel: [ 6.126612] drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [609]
> Oct 29 15:08:32 darkstar kernel: [ 6.129705] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [610]
> Oct 29 15:08:32 darkstar kernel: [ 6.129990] md: Waiting for all devices to be available before autodetect
> Oct 29 15:08:32 darkstar kernel: [ 6.152892] md: If you don't use raid, use raid=noautodetect
> Oct 29 15:08:32 darkstar kernel: [ 6.178277] md: Autodetecting RAID arrays.
> Oct 29 15:08:32 darkstar kernel: [ 6.189302] md: Scanned 0 and added 0 devices.
> Oct 29 15:08:32 darkstar kernel: [ 6.200230] md: autorun ...
> Oct 29 15:08:32 darkstar kernel: [ 6.211012] md: ... autorun DONE.
> Oct 29 15:08:32 darkstar kernel: [ 6.501012] kjournald starting. Commit interval 5 seconds
> Oct 29 15:08:32 darkstar kernel: [ 6.501731] EXT3-fs: mounted filesystem with writeback data mode.
> Oct 29 15:08:32 darkstar kernel: [ 6.501973] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
> Oct 29 15:08:32 darkstar kernel: [ 6.566188] Freeing unused kernel memory: 384k freed
> Oct 29 15:08:32 darkstar kernel: [ 6.588717] Write protecting the kernel text: 3404k
> Oct 29 15:08:32 darkstar kernel: [ 6.599694] Write protecting the kernel read-only data: 1932k
> Oct 29 15:08:32 darkstar kernel: [ 8.993092] cdrom_id used greatest stack depth: 5856 bytes left
> Oct 29 15:08:32 darkstar kernel: [ 9.012525] cfg80211: Using static regulatory domain info
> Oct 29 15:08:32 darkstar kernel: [ 9.023380] cfg80211: Regulatory domain: US
> Oct 29 15:08:32 darkstar kernel: [ 9.033906] ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> Oct 29 15:08:32 darkstar kernel: [ 9.044924] ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
> Oct 29 15:08:32 darkstar kernel: [ 9.055982] ^I(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> Oct 29 15:08:32 darkstar kernel: [ 9.066742] ^I(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> Oct 29 15:08:32 darkstar kernel: [ 9.069530] ACPI: WMI: Mapper loaded
> Oct 29 15:08:32 darkstar kernel: [ 9.088499] ^I(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> Oct 29 15:08:32 darkstar kernel: [ 9.099789] ^I(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> Oct 29 15:08:32 darkstar kernel: [ 9.110511] ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
> Oct 29 15:08:32 darkstar kernel: [ 9.215994] cfg80211: Calling CRDA for country: US
> Oct 29 15:08:32 darkstar kernel: [ 9.576264] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
> Oct 29 15:08:32 darkstar kernel: [ 9.621094] b43-phy0 debug: Found PHY: Analog 6, Type 5, Revision 1
> Oct 29 15:08:32 darkstar kernel: [ 9.621119] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2062, Revision 2
> Oct 29 15:08:32 darkstar kernel: [ 9.643418] phy0: Selected rate control algorithm 'minstrel'
> Oct 29 15:08:32 darkstar kernel: [ 9.647010] Registered led device: b43-phy0::tx
> Oct 29 15:08:32 darkstar kernel: [ 9.668083] Registered led device: b43-phy0::rx
> Oct 29 15:08:32 darkstar kernel: [ 9.688675] Registered led device: b43-phy0::radio
> Oct 29 15:08:32 darkstar kernel: [ 9.698934] Broadcom 43xx driver loaded [ Features: PLS, Firmware-ID: FW13 ]
> Oct 29 15:08:32 darkstar kernel: [ 10.006303] ohci1394 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> Oct 29 15:08:32 darkstar kernel: [ 10.083112] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f67ff800-f67fffff] Max Packet=[2048] IR/IT contexts=[4/4]
> Oct 29 15:08:32 darkstar kernel: [ 10.189891] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> Oct 29 15:08:32 darkstar kernel: [ 10.211309] HDA Intel 0000:00:1b.0: setting latency timer to 64
> Oct 29 15:08:32 darkstar kernel: [ 10.659098] Adding 2008084k swap on /dev/sda8. Priority:-1 extents:1 across:2008084k
> Oct 29 15:08:32 darkstar kernel: [ 11.373895] ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc0001679c05c]
> Oct 29 15:08:32 darkstar kernel: [ 12.833903] EXT3 FS on sda2, internal journal
> Oct 29 15:08:32 darkstar kernel: [ 17.492595] kjournald starting. Commit interval 5 seconds
> Oct 29 15:08:32 darkstar kernel: [ 17.493282] EXT3 FS on sda3, internal journal
> Oct 29 15:08:32 darkstar kernel: [ 17.493315] EXT3-fs: mounted filesystem with writeback data mode.
>
>>
>> --
>> Dmitry
>

Ping. Any further idea?

--
Regards
dave

2009-11-02 07:47:42

by Dmitry Torokhov

[permalink] [raw]

Subject: Re: [PATCH][RFC] input: remove bios I8042_CTR_XLATE check to make keyboard usable

Hi Dave,

On Sun, Nov 01, 2009 at 04:33:05PM +0800, Dave Young wrote:
> On Thu, Oct 29, 2009 at 3:15 PM, Dave Young <[email protected]> wrote:
> > On Wed, Oct 28, 2009 at 08:26:33PM -0700, Dmitry Torokhov wrote:
> >> On Thu, Oct 29, 2009 at 08:33:26AM +0800, Dave Young wrote:
> >> > On Wed, Oct 28, 2009 at 06:42:12PM +0800, Dave Young wrote:
> >> > > On Wed, Oct 28, 2009 at 11:03:18AM +0100, Vojtech Pavlik wrote:
> >> > > > On Tue, Oct 27, 2009 at 10:43:10PM -0700, Dmitry Torokhov wrote:
> >> > > > > Hi Dave,
> >> > > > >
> >> > > > > On Tue, Oct 27, 2009 at 01:34:04PM +0800, Dave Young wrote:
> >> > > > > >
> >> > > > > > Pressing somekey at early booting phase cause keyboard to be not usable
> >> > > > > > (The hardware is DELL latitude e5400):
> >> > > >
> >> > > > Does early booting mean while the BIOS is coming up? Does the keyboard
> >> > > > work in GRUB then? Or is it during the early init of the Linux kernel?
> >> > >
> >> > > Keyboard work under lilo.
> >> > > For the early booting I means the early init of the linux kernel
> >> > >
> >> > > >
> >> > > > > > atkbd.c: Unknown key pressed (raw set 2, code 0xd3 on isa0060/serio0).
> >> > > > > > atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
> >> > > > > > atkbd.c: Unknown key pressed (raw set 2, code 0x1d3 on isa0060/serio0).
> >> > > > > > atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
> >> > > > > >
> >> > > > > > i8042.c set i8042_direct to true when the controller init. But the result
> >> > > > > > is keyboard not usable, The only option is press the power button to shutdown.
> >> > > > > >
> >> > > > > > So here remove the bios check to fix it.
> >> > > >
> >> > > > My question would be: Why this happens? Could it be that the probe is
> >> > > > confused by the keypress and reads the CTR incorrectly? Or is it just
> >> > > > that the keyboard controller is in fact in translating mode, yet the CTR
> >> > > > indicates otherwise?
> >> > > >
> >> > > > A i8042.debug=1 log of the bad init would be good.
> >> > >
> >> > > Here it is (retrieve from syslog):
> >> >
> >> > Syslog redirect the debug info to another log file, sorry, post again:
> >> >
> >>
> >> Any chance of reconfiguring syslog so debug is captured in the same
> >> file? It is easier to see what is happening with the rest of context
> >> present...
> >
> > Sure, here it is:
> >

Does the patch below help by any chance?

Thanks.

--
Dmitry

Input: i8042 - try to get stable CTR value when initializing

From: Dmitry Torokhov <[email protected]>

If user presses keys while i8042 is being initialized there is a chance
that keyboard data will be mistaken for results of Read Control Register
command causing futher troubles. Work around this issue by reading CTR
several times and stop when we get matching results.

Reported-by: Dave Young <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
---

drivers/input/serio/i8042.c | 35 ++++++++++++++++++++++++++++-------
1 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index a315781..43f2b19 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -836,17 +836,32 @@ static int i8042_controller_selftest(void)
static int i8042_controller_init(void)
{
unsigned long flags;
+ int n = 0;
+ unsigned char ctr[2];

/*
- * Save the CTR for restoral on unload / reboot.
+ * Save the CTR for restore on unload / reboot.
*/

- if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
- printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n");
- return -EIO;
- }
+ do {
+ if (n >= 10) {
+ printk(KERN_ERR
+ "i8042.c: Unable to get stable CTR read.\n");
+ return -EIO;
+ }
+
+ if (n != 0)
+ udelay(50);
+
+ if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
+ printk(KERN_ERR
+ "i8042.c: Can't read CTR while initializing i8042.\n");
+ return -EIO;
+ }

- i8042_initial_ctr = i8042_ctr;
+ } while (n < 2 || ctr[0] != ctr[1]);
+
+ i8042_initial_ctr = i8042_ctr = ctr[0];

/*
* Disable the keyboard interface and interrupt.
@@ -895,6 +910,12 @@ static int i8042_controller_init(void)
return -EIO;
}

+/*
+ * Flush whatever accumulated while we were disabling keyboard port
+ */
+
+ i8042_flush();
+
return 0;
}

@@ -914,7 +935,7 @@ static void i8042_controller_reset(void)
i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS;
i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);

- if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n");

/*

2009-11-02 10:49:34

by Dave Young

[permalink] [raw]

Subject: Re: [PATCH][RFC] input: remove bios I8042_CTR_XLATE check to make keyboard usable

On Mon, Nov 2, 2009 at 3:47 PM, Dmitry Torokhov
<[email protected]> wrote:
> Hi Dave,
>
> On Sun, Nov 01, 2009 at 04:33:05PM +0800, Dave Young wrote:
>> On Thu, Oct 29, 2009 at 3:15 PM, Dave Young <[email protected]> wrote:
>> > On Wed, Oct 28, 2009 at 08:26:33PM -0700, Dmitry Torokhov wrote:
>> >> On Thu, Oct 29, 2009 at 08:33:26AM +0800, Dave Young wrote:
>> >> > On Wed, Oct 28, 2009 at 06:42:12PM +0800, Dave Young wrote:
>> >> > > On Wed, Oct 28, 2009 at 11:03:18AM +0100, Vojtech Pavlik wrote:
>> >> > > > On Tue, Oct 27, 2009 at 10:43:10PM -0700, Dmitry Torokhov wrote:
>> >> > > > > Hi Dave,
>> >> > > > >
>> >> > > > > On Tue, Oct 27, 2009 at 01:34:04PM +0800, Dave Young wrote:
>> >> > > > > >
>> >> > > > > > Pressing somekey at early booting phase cause keyboard to be not usable
>> >> > > > > > (The hardware is DELL latitude e5400):
>> >> > > >
>> >> > > > Does early booting mean while the BIOS is coming up? Does the keyboard
>> >> > > > work in GRUB then? Or is it during the early init of the Linux kernel?
>> >> > >
>> >> > > Keyboard work under lilo.
>> >> > > For the early booting I means the early init of the linux kernel
>> >> > >
>> >> > > >
>> >> > > > > > atkbd.c: Unknown key pressed (raw set 2, code 0xd3 on isa0060/serio0).
>> >> > > > > > atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
>> >> > > > > > atkbd.c: Unknown key pressed (raw set 2, code 0x1d3 on isa0060/serio0).
>> >> > > > > > atkbd.c: Use 'setkeycodes e053 <keycode>' to make it known.
>> >> > > > > >
>> >> > > > > > i8042.c set i8042_direct to true when the controller init. But the result
>> >> > > > > > is keyboard not usable, The only option is press the power button to shutdown.
>> >> > > > > >
>> >> > > > > > So here remove the bios check to fix it.
>> >> > > >
>> >> > > > My question would be: Why this happens? Could it be that the probe is
>> >> > > > confused by the keypress and reads the CTR incorrectly? Or is it just
>> >> > > > that the keyboard controller is in fact in translating mode, yet the CTR
>> >> > > > indicates otherwise?
>> >> > > >
>> >> > > > A i8042.debug=1 log of the bad init would be good.
>> >> > >
>> >> > > Here it is (retrieve from syslog):
>> >> >
>> >> > Syslog redirect the debug info to another log file, sorry, post again:
>> >> >
>> >>
>> >> Any chance of reconfiguring syslog so debug is captured in the same
>> >> file? It is easier to see what is happening with the rest of context
>> >> present...
>> >
>> > Sure, here it is:
>> >
>
> Does the patch below help by any chance?
>
> Thanks.
>
> --
> Dmitry
>
>
> Input: i8042 - try to get stable CTR value when initializing
>
> From: Dmitry Torokhov <[email protected]>
>
> If user presses keys while i8042 is being initialized there is a chance
> that keyboard data will be mistaken for results of Read Control Register
> command causing futher troubles. Work around this issue by reading CTR
> several times and stop when we get matching results.
>
> Reported-by: Dave Young <[email protected]>
> Signed-off-by: Dmitry Torokhov <[email protected]>
> ---

Works well, thanks.

Tested-by: Dave Young <[email protected]>

>
> drivers/input/serio/i8042.c | 35 ++++++++++++++++++++++++++++-------
> 1 files changed, 28 insertions(+), 7 deletions(-)
>
>
> diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
> index a315781..43f2b19 100644
> --- a/drivers/input/serio/i8042.c
> +++ b/drivers/input/serio/i8042.c
> @@ -836,17 +836,32 @@ static int i8042_controller_selftest(void)
> static int i8042_controller_init(void)
> {
> unsigned long flags;
> + int n = 0;
> + unsigned char ctr[2];
>
> /*
> - * Save the CTR for restoral on unload / reboot.
> + * Save the CTR for restore on unload / reboot.
> */
>
> - if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
> - printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n");
> - return -EIO;
> - }
> + do {
> + if (n >= 10) {
> + printk(KERN_ERR
> + "i8042.c: Unable to get stable CTR read.\n");
> + return -EIO;
> + }
> +
> + if (n != 0)
> + udelay(50);
> +
> + if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
> + printk(KERN_ERR
> + "i8042.c: Can't read CTR while initializing i8042.\n");
> + return -EIO;
> + }
>
> - i8042_initial_ctr = i8042_ctr;
> + } while (n < 2 || ctr[0] != ctr[1]);
> +
> + i8042_initial_ctr = i8042_ctr = ctr[0];
>
> /*
> * Disable the keyboard interface and interrupt.
> @@ -895,6 +910,12 @@ static int i8042_controller_init(void)
> return -EIO;
> }
>
> +/*
> + * Flush whatever accumulated while we were disabling keyboard port
> + */
> +
> + i8042_flush();
> +
> return 0;
> }
>
> @@ -914,7 +935,7 @@ static void i8042_controller_reset(void)
> i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS;
> i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);
>
> - if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
> + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
> printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n");
>
> /*
>

--
Regards
dave