From: Stefan Weinhuber <[email protected]>
The DASD device driver needs to explicitly enable the prefix command
on the storage server, before it can be used. Originally we enabled
this command along with others only if we wanted to support PAV.
However, today we require this command for other features like
High Performance FICON as well, so we need to always enable prefix.
Signed-off-by: Stefan Weinhuber <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
---
drivers/s390/block/dasd_eckd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Index: quilt-2.6/drivers/s390/block/dasd_eckd.c
===================================================================
--- quilt-2.6.orig/drivers/s390/block/dasd_eckd.c 2009-11-13 16:08:14.000000000 +0100
+++ quilt-2.6/drivers/s390/block/dasd_eckd.c 2009-11-13 16:08:16.000000000 +0100
@@ -1011,9 +1011,9 @@
}
psf_ssc_data = (struct dasd_psf_ssc_data *)cqr->data;
psf_ssc_data->order = PSF_ORDER_SSC;
- psf_ssc_data->suborder = 0x40;
+ psf_ssc_data->suborder = 0xc0;
if (enable_pav) {
- psf_ssc_data->suborder |= 0x88;
+ psf_ssc_data->suborder |= 0x08;
psf_ssc_data->reserved[0] = 0x88;
}
ccw = cqr->cpaddr;