The chip returns voltage and current in mV and mA, but
power supply class uses uV and uA, so add missing conversion.
Signed-off-by: Grazvydas Ignotas <[email protected]>
---
drivers/power/bq27x00_battery.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index 5d940fa..bece33e 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -125,7 +125,7 @@ static int bq27x00_battery_voltage(struct bq27x00_device_info *di)
return ret;
}
- return volt;
+ return volt * 1000;
}
/*
@@ -156,11 +156,11 @@ static int bq27x00_battery_current(struct bq27x00_device_info *di)
}
if (flags & BQ27000_FLAG_CHGS) {
dev_dbg(di->dev, "negative current!\n");
- return -curr;
+ curr = -curr;
}
}
- return curr;
+ return curr * 1000;
}
/*
--
1.6.3.3
On Sat, Feb 27, 2010 at 05:06:44PM +0200, Grazvydas Ignotas wrote:
> The chip returns voltage and current in mV and mA, but
> power supply class uses uV and uA, so add missing conversion.
>
> Signed-off-by: Grazvydas Ignotas <[email protected]>
> ---
Applied.
Thanks!
--
Anton Vorontsov
email: [email protected]
irc://irc.freenode.net/bd2