This is the start of the stable review cycle for the 2.6.33.3 release.
There are 139 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Saturday, April 24, 15:00:00 UTC.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v2.6/stable-review/patch-2.6.33.3-rc1.gz
and the diffstat can be found below.
thanks,
greg k-h
Documentation/i2c/busses/i2c-i801 | 3 +-
Makefile | 2 +-
arch/arm/boot/compressed/head.S | 2 +-
arch/ia64/kvm/kvm-ia64.c | 9 +-
arch/mips/mm/tlbex.c | 22 ++-
arch/powerpc/kvm/book3s.c | 5 +-
arch/powerpc/platforms/pseries/offline_states.h | 22 ++-
arch/s390/mm/vmem.c | 11 +-
arch/sh/include/asm/elf.h | 6 +-
arch/sh/kernel/smp.c | 1 +
arch/sparc/kernel/ptrace_32.c | 4 +
arch/sparc/kernel/ptrace_64.c | 4 +
arch/um/sys-x86_64/Makefile | 3 +-
arch/x86/Kconfig.cpu | 2 +-
arch/x86/include/asm/rwsem.h | 81 +++++---
arch/x86/include/asm/smp.h | 9 +
arch/x86/kernel/amd_iommu.c | 6 +-
arch/x86/kernel/amd_iommu_init.c | 5 +-
arch/x86/kernel/aperture_64.c | 15 ++-
arch/x86/kernel/apic/apic.c | 2 +
arch/x86/kernel/cpu/intel_cacheinfo.c | 250 ++++++++++++++---------
arch/x86/kernel/cpu/perf_event.c | 104 ++++++++++-
arch/x86/kernel/crash.c | 6 -
arch/x86/kernel/hpet.c | 8 +-
arch/x86/kernel/kgdb.c | 2 +-
arch/x86/kernel/mpparse.c | 4 +-
arch/x86/kernel/pci-gart_64.c | 3 +
arch/x86/kvm/mmu.c | 11 +-
arch/x86/kvm/svm.c | 25 ++-
arch/x86/kvm/vmx.c | 37 +++-
arch/x86/kvm/x86.c | 45 ++---
arch/x86/lib/Makefile | 3 +-
arch/x86/lib/cache-smp.c | 19 ++
arch/x86/lib/rwsem_64.S | 81 ++++++++
arch/x86/pci/irq.c | 2 +
arch/x86/power/hibernate_asm_32.S | 15 +-
drivers/acpi/acpica/exprep.c | 17 ++
drivers/acpi/ec.c | 35 +---
drivers/ata/ahci.c | 6 +
drivers/ata/ata_piix.c | 8 +
drivers/ata/libata-core.c | 3 +
drivers/ata/pata_via.c | 1 +
drivers/char/agp/intel-agp.c | 15 +-
drivers/char/raw.c | 1 +
drivers/char/tty_io.c | 2 +
drivers/gpu/drm/drm_crtc_helper.c | 1 +
drivers/gpu/drm/drm_edid.c | 11 +-
drivers/gpu/drm/drm_fops.c | 16 +-
drivers/gpu/drm/i915/intel_lvds.c | 8 +
drivers/gpu/drm/radeon/atom.c | 10 +
drivers/gpu/drm/radeon/r300.c | 5 +-
drivers/gpu/drm/radeon/radeon_combios.c | 20 ++-
drivers/gpu/drm/radeon/radeon_connectors.c | 7 +-
drivers/gpu/drm/radeon/radeon_cp.c | 10 +-
drivers/gpu/drm/radeon/radeon_cs.c | 15 +-
drivers/gpu/drm/radeon/radeon_device.c | 8 +
drivers/gpu/drm/radeon/radeon_encoders.c | 8 +-
drivers/gpu/drm/radeon/radeon_legacy_tv.c | 29 +++-
drivers/gpu/drm/radeon/rs600.c | 2 +-
drivers/hid/hid-gyration.c | 5 +-
drivers/hwmon/sht15.c | 13 +-
drivers/i2c/busses/Kconfig | 5 +-
drivers/i2c/busses/i2c-i801.c | 5 +-
drivers/infiniband/ulp/ipoib/ipoib_cm.c | 2 +
drivers/input/sparse-keymap.c | 2 +-
drivers/input/tablet/wacom_sys.c | 12 +-
drivers/md/dm-ioctl.c | 19 +-
drivers/md/dm.c | 7 +-
drivers/md/dm.h | 4 +-
drivers/md/linear.c | 12 +-
drivers/md/multipath.c | 20 +-
drivers/md/raid0.c | 13 +-
drivers/md/raid10.c | 28 ++-
drivers/md/raid5.c | 19 +-
drivers/net/e1000e/netdev.c | 2 +
drivers/net/wireless/ath/ar9170/usb.c | 2 +-
drivers/net/wireless/ath/ath9k/main.c | 3 +-
drivers/net/wireless/b43/Kconfig | 6 +-
drivers/net/wireless/b43/Makefile | 2 +-
drivers/net/wireless/b43/b43.h | 12 +-
drivers/net/wireless/b43/dma.c | 2 -
drivers/net/wireless/b43/main.c | 11 +-
drivers/net/wireless/b43/pio.h | 40 ----
drivers/net/wireless/iwlwifi/iwl-4965.c | 11 +-
drivers/net/wireless/iwlwifi/iwl-5000.c | 2 +
drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-scan.c | 27 +--
drivers/net/wireless/iwlwifi/iwl3945-base.c | 4 +-
drivers/pci/pci.c | 24 ++-
drivers/scsi/libiscsi.c | 5 +-
drivers/usb/class/cdc-acm.c | 43 ++--
drivers/usb/class/cdc-acm.h | 1 -
drivers/video/backlight/mbp_nvidia_bl.c | 45 ++++
drivers/video/sunxvr500.c | 24 ++-
drivers/watchdog/hpwdt.c | 2 +-
drivers/watchdog/iTCO_wdt.c | 99 +++++++++-
fs/9p/vfs_file.c | 2 +-
fs/block_dev.c | 3 +-
fs/cifs/cifssmb.c | 19 ++-
fs/ecryptfs/inode.c | 108 +++++-----
fs/ecryptfs/super.c | 1 -
fs/ext4/ext4.h | 6 +-
fs/ext4/extents.c | 2 +-
fs/ext4/inode.c | 2 +-
fs/fat/namei_vfat.c | 6 +-
fs/nfs/client.c | 3 +-
fs/nfs/dir.c | 2 +-
fs/nfs/nfs4proc.c | 4 +-
fs/nfsd/nfs4xdr.c | 12 +-
fs/ocfs2/acl.c | 77 +++++++-
fs/ocfs2/suballoc.c | 13 +-
fs/proc/base.c | 5 +-
fs/quota/dquot.c | 12 +-
fs/reiserfs/super.c | 10 +-
fs/xfs/linux-2.6/xfs_aops.c | 93 +++++----
fs/xfs/linux-2.6/xfs_sync.c | 10 +-
fs/xfs/xfs_iget.c | 19 ++-
include/drm/drm_pciids.h | 2 +
include/linux/dm-ioctl.h | 9 +-
include/linux/freezer.h | 7 +-
include/linux/fs.h | 1 +
include/linux/kfifo.h | 3 +-
include/linux/kvm_host.h | 7 +-
include/linux/module.h | 2 +-
include/linux/nfs_fs_sb.h | 1 +
include/linux/pci.h | 5 +
include/linux/pci_ids.h | 3 +
kernel/cgroup_freezer.c | 9 +-
kernel/irq/manage.c | 10 +
kernel/lockdep.c | 6 +-
kernel/module.c | 2 +-
kernel/power/process.c | 2 +-
kernel/sched.c | 10 +-
mm/readahead.c | 2 +-
net/mac80211/mesh.c | 3 -
net/mac80211/mesh_hwmp.c | 4 +-
net/mac80211/rx.c | 5 +
net/mac80211/tx.c | 6 +
net/mac80211/util.c | 20 ++-
sound/pci/hda/hda_intel.c | 10 +
sound/pci/hda/patch_analog.c | 8 +
sound/pci/hda/patch_realtek.c | 1 +
sound/pci/mixart/mixart.c | 24 ++-
sound/usb/usbmidi.c | 24 ++-
virt/kvm/kvm_main.c | 13 +-
145 files changed, 1513 insertions(+), 697 deletions(-)
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Steve French <[email protected]>
commit a24e2d7d8f512340991ef0a59cb5d08d491b8e98 upstream.
By doing this we always overwrite nbytes value that is being passed on to
CIFSSMBWrite() and need not rely on the callers to initialize. CIFSSMBWrite2 is
doing this already.
Reviewed-by: Shirish Pargaonkar <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Suresh Jayaraman <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/cifssmb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1430,6 +1430,8 @@ CIFSSMBWrite(const int xid, struct cifsT
__u32 bytes_sent;
__u16 byte_count;
+ *nbytes = 0;
+
/* cFYI(1, ("write at %lld %d bytes", offset, count));*/
if (tcon->ses == NULL)
return -ECONNABORTED;
@@ -1512,7 +1514,6 @@ CIFSSMBWrite(const int xid, struct cifsT
cifs_stats_inc(&tcon->num_writes);
if (rc) {
cFYI(1, ("Send error in write = %d", rc));
- *nbytes = 0;
} else {
*nbytes = le16_to_cpu(pSMBr->CountHigh);
*nbytes = (*nbytes) << 16;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Linus Torvalds <[email protected]>
commit 4126faf0ab7417fbc6eb99fb0fd407e01e9e9dfe upstream.
The patches 5d0b7235d83eefdafda300656e97d368afcafc9a and
bafaecd11df15ad5b1e598adc7736afcd38ee13d broke the UML build:
On Sun, 17 Jan 2010, Ingo Molnar wrote:
>
> FYI, -tip testing found that these changes break the UML build:
>
> kernel/built-in.o: In function `__up_read':
> /home/mingo/tip/arch/x86/include/asm/rwsem.h:192: undefined reference to `call_rwsem_wake'
> kernel/built-in.o: In function `__up_write':
> /home/mingo/tip/arch/x86/include/asm/rwsem.h:210: undefined reference to `call_rwsem_wake'
> kernel/built-in.o: In function `__downgrade_write':
> /home/mingo/tip/arch/x86/include/asm/rwsem.h:228: undefined reference to `call_rwsem_downgrade_wake'
> kernel/built-in.o: In function `__down_read':
> /home/mingo/tip/arch/x86/include/asm/rwsem.h:112: undefined reference to `call_rwsem_down_read_failed'
> kernel/built-in.o: In function `__down_write_nested':
> /home/mingo/tip/arch/x86/include/asm/rwsem.h:154: undefined reference to `call_rwsem_down_write_failed'
> collect2: ld returned 1 exit status
Add lib/rwsem_64.o to the UML subarch objects to fix.
LKML-Reference: <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/um/sys-x86_64/Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/um/sys-x86_64/Makefile
+++ b/arch/um/sys-x86_64/Makefile
@@ -8,7 +8,8 @@ obj-y = bug.o bugs.o delay.o fault.o ldt
setjmp.o signal.o stub.o stub_segv.o syscalls.o syscall_table.o \
sysrq.o ksyms.o tls.o
-subarch-obj-y = lib/csum-partial_64.o lib/memcpy_64.o lib/thunk_64.o
+subarch-obj-y = lib/csum-partial_64.o lib/memcpy_64.o lib/thunk_64.o \
+ lib/rwsem_64.o
subarch-obj-$(CONFIG_MODULES) += kernel/module.o
ldt-y = ../sys-i386/ldt.o
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Borislav Petkov <[email protected]>
commit 048a8774ca43488d78605031f11cc206d7a2682a upstream.
We need to know the valid L3 indices interval when disabling them over
/sysfs. Do that when the core is brought online and add boundary checks
to the sysfs .store attribute.
Signed-off-by: Borislav Petkov <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/intel_cacheinfo.c | 35 ++++++++++++++++++++++++++++++----
1 file changed, 31 insertions(+), 4 deletions(-)
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -151,7 +151,8 @@ struct _cpuid4_info {
union _cpuid4_leaf_ebx ebx;
union _cpuid4_leaf_ecx ecx;
unsigned long size;
- unsigned long can_disable;
+ bool can_disable;
+ unsigned int l3_indices;
DECLARE_BITMAP(shared_cpu_map, NR_CPUS);
};
@@ -161,7 +162,8 @@ struct _cpuid4_info_regs {
union _cpuid4_leaf_ebx ebx;
union _cpuid4_leaf_ecx ecx;
unsigned long size;
- unsigned long can_disable;
+ bool can_disable;
+ unsigned int l3_indices;
};
unsigned short num_cache_leaves;
@@ -291,6 +293,29 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_
(ebx->split.ways_of_associativity + 1) - 1;
}
+static unsigned int __cpuinit amd_calc_l3_indices(void)
+{
+ /*
+ * We're called over smp_call_function_single() and therefore
+ * are on the correct cpu.
+ */
+ int cpu = smp_processor_id();
+ int node = cpu_to_node(cpu);
+ struct pci_dev *dev = node_to_k8_nb_misc(node);
+ unsigned int sc0, sc1, sc2, sc3;
+ u32 val;
+
+ pci_read_config_dword(dev, 0x1C4, &val);
+
+ /* calculate subcache sizes */
+ sc0 = !(val & BIT(0));
+ sc1 = !(val & BIT(4));
+ sc2 = !(val & BIT(8)) + !(val & BIT(9));
+ sc3 = !(val & BIT(12)) + !(val & BIT(13));
+
+ return (max(max(max(sc0, sc1), sc2), sc3) << 10) - 1;
+}
+
static void __cpuinit
amd_check_l3_disable(int index, struct _cpuid4_info_regs *this_leaf)
{
@@ -306,7 +331,8 @@ amd_check_l3_disable(int index, struct _
(boot_cpu_data.x86_mask < 0x1)))
return;
- this_leaf->can_disable = 1;
+ this_leaf->can_disable = true;
+ this_leaf->l3_indices = amd_calc_l3_indices();
}
static int
@@ -765,7 +791,8 @@ static ssize_t store_cache_disable(struc
return -EINVAL;
/* do not allow writes outside of allowed bits */
- if (val & ~(SUBCACHE_MASK | SUBCACHE_INDEX))
+ if ((val & ~(SUBCACHE_MASK | SUBCACHE_INDEX)) ||
+ ((val & SUBCACHE_INDEX) > this_leaf->l3_indices))
return -EINVAL;
val |= BIT(30);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Dave Airlie <[email protected]>
commit 79b9517a33a283c5d9db875c263670ed1e055f7e upstream.
This is an M24/X600 chip.
>From RH# 581927
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/drm/drm_pciids.h | 1 +
1 file changed, 1 insertion(+)
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -6,6 +6,7 @@
{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
{0x1002, 0x3152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x3155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3E50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3E54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS100|RADEON_IS_IGP}, \
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Andi Kleen <[email protected]>
commit 909fc87b32b3b9e3f0b87dcc5d98319c41900c58 upstream.
We found a system where the MP table MPC and MPF structures overlap.
That doesn't really matter because the mptable is not used anyways with ACPI,
but it leads to a panic in the early allocator due to the overlapping
reservations in 2.6.33.
Earlier kernels handled this without problems.
Simply change these reservations to reserve_early_overlap_ok to avoid
the panic.
Reported-by: Thomas Renninger <[email protected]>
Tested-by: Thomas Renninger <[email protected]>
Signed-off-by: Andi Kleen <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/mpparse.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -664,7 +664,7 @@ static void __init smp_reserve_memory(st
{
unsigned long size = get_mpc_size(mpf->physptr);
- reserve_early(mpf->physptr, mpf->physptr+size, "MP-table mpc");
+ reserve_early_overlap_ok(mpf->physptr, mpf->physptr+size, "MP-table mpc");
}
static int __init smp_scan_config(unsigned long base, unsigned long length)
@@ -693,7 +693,7 @@ static int __init smp_scan_config(unsign
mpf, (u64)virt_to_phys(mpf));
mem = virt_to_phys(mpf);
- reserve_early(mem, mem + sizeof(*mpf), "MP-table mpf");
+ reserve_early_overlap_ok(mem, mem + sizeof(*mpf), "MP-table mpf");
if (mpf->physptr)
smp_reserve_memory(mpf);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: KOSAKI Motohiro <[email protected]>
commit 8bc037fb89bb3104b9ae290d18c877624cd7d9cc upstream.
Using the proper type fixes the following compiler warning:
kernel/sched.c:4850: warning: comparison of distinct pointer types lacks a cast
Signed-off-by: KOSAKI Motohiro <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -6727,7 +6727,7 @@ SYSCALL_DEFINE3(sched_getaffinity, pid_t
ret = sched_getaffinity(pid, mask);
if (ret == 0) {
- int retlen = min(len, cpumask_size());
+ size_t retlen = min_t(size_t, len, cpumask_size());
if (copy_to_user(user_mask_ptr, mask, retlen))
ret = -EFAULT;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: NeilBrown <[email protected]>
commit 627a2d3c29427637f4c5d31ccc7fcbd8d312cd71 upstream.
If a component device has a merge_bvec_fn then as we never call it
we must ensure we never need to. Currently this is done by setting
max_sector to 1 PAGE, however this does not stop a bio being created
with several sub-page iovecs that would violate the merge_bvec_fn.
So instead set max_phys_segments to 1 and set the segment boundary to the
same as a page boundary to ensure there is only ever one single-page
segment of IO requested at a time.
This can particularly be an issue when 'xen' is used as it is
known to submit multiple small buffers in a single bio.
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/linear.c | 12 +++++++-----
drivers/md/multipath.c | 20 ++++++++++++--------
drivers/md/raid0.c | 13 +++++++------
drivers/md/raid10.c | 28 +++++++++++++++++-----------
4 files changed, 43 insertions(+), 30 deletions(-)
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -172,12 +172,14 @@ static linear_conf_t *linear_conf(mddev_
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
- * violating it, so limit ->max_sector to one PAGE, as
- * a one page request is never in violation.
+ * violating it, so limit max_phys_segments to 1 lying within
+ * a single page.
*/
- if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
- queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
- blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
+ if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
+ blk_queue_max_phys_segments(mddev->queue, 1);
+ blk_queue_segment_boundary(mddev->queue,
+ PAGE_CACHE_SIZE - 1);
+ }
conf->array_sectors += rdev->sectors;
cnt++;
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -301,14 +301,16 @@ static int multipath_add_disk(mddev_t *m
rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
- * violating it, so limit ->max_sector to one PAGE, as
- * a one page request is never in violation.
+ * violating it, so limit ->max_phys_segments to one, lying
+ * within a single page.
* (Note: it is very unlikely that a device with
* merge_bvec_fn will be involved in multipath.)
*/
- if (q->merge_bvec_fn &&
- queue_max_sectors(q) > (PAGE_SIZE>>9))
- blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
+ if (q->merge_bvec_fn) {
+ blk_queue_max_phys_segments(mddev->queue, 1);
+ blk_queue_segment_boundary(mddev->queue,
+ PAGE_CACHE_SIZE - 1);
+ }
conf->working_disks++;
mddev->degraded--;
@@ -476,9 +478,11 @@ static int multipath_run (mddev_t *mddev
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, not that we ever expect a device with
* a merge_bvec_fn to be involved in multipath */
- if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
- queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
- blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
+ if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
+ blk_queue_max_phys_segments(mddev->queue, 1);
+ blk_queue_segment_boundary(mddev->queue,
+ PAGE_CACHE_SIZE - 1);
+ }
if (!test_bit(Faulty, &rdev->flags))
conf->working_disks++;
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -176,14 +176,15 @@ static int create_strip_zones(mddev_t *m
disk_stack_limits(mddev->gendisk, rdev1->bdev,
rdev1->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
- * violating it, so limit ->max_sector to one PAGE, as
- * a one page request is never in violation.
+ * violating it, so limit ->max_phys_segments to 1, lying within
+ * a single page.
*/
- if (rdev1->bdev->bd_disk->queue->merge_bvec_fn &&
- queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
- blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
-
+ if (rdev1->bdev->bd_disk->queue->merge_bvec_fn) {
+ blk_queue_max_phys_segments(mddev->queue, 1);
+ blk_queue_segment_boundary(mddev->queue,
+ PAGE_CACHE_SIZE - 1);
+ }
if (!smallest || (rdev1->sectors < smallest->sectors))
smallest = rdev1;
cnt++;
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1155,13 +1155,17 @@ static int raid10_add_disk(mddev_t *mdde
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
- /* as we don't honour merge_bvec_fn, we must never risk
- * violating it, so limit ->max_sector to one PAGE, as
- * a one page request is never in violation.
+ /* as we don't honour merge_bvec_fn, we must
+ * never risk violating it, so limit
+ * ->max_phys_segments to one lying with a single
+ * page, as a one page request is never in
+ * violation.
*/
- if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
- queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
- blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
+ if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
+ blk_queue_max_phys_segments(mddev->queue, 1);
+ blk_queue_segment_boundary(mddev->queue,
+ PAGE_CACHE_SIZE - 1);
+ }
p->head_position = 0;
rdev->raid_disk = mirror;
@@ -2255,12 +2259,14 @@ static int run(mddev_t *mddev)
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
- * violating it, so limit ->max_sector to one PAGE, as
- * a one page request is never in violation.
+ * violating it, so limit max_phys_segments to 1 lying
+ * within a single page.
*/
- if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
- queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
- blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
+ if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
+ blk_queue_max_phys_segments(mddev->queue, 1);
+ blk_queue_segment_boundary(mddev->queue,
+ PAGE_CACHE_SIZE - 1);
+ }
disk->head_position = 0;
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Alexey Starikovskiy <[email protected]>
commit 2060c44576c79086ff24718878d7edaa7384a985 upstream.
access_bit_width field is u8 in ACPICA, thus 256 value written to it
becomes 0, causing divide by zero later.
Proper fix would be to remove access_bit_width at all, just because
we already have access_byte_width, which is access_bit_width / 8.
Limit access width to 64 bit for now.
https://bugzilla.kernel.org/show_bug.cgi?id=15749
fixes regression caused by the fix for:
https://bugzilla.kernel.org/show_bug.cgi?id=14667
Signed-off-by: Alexey Starikovskiy <[email protected]>
Signed-off-by: Len Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/acpica/exprep.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
--- a/drivers/acpi/acpica/exprep.c
+++ b/drivers/acpi/acpica/exprep.c
@@ -471,13 +471,18 @@ acpi_status acpi_ex_prep_field_value(str
/* allow full data read from EC address space */
if (obj_desc->field.region_obj->region.space_id ==
ACPI_ADR_SPACE_EC) {
- if (obj_desc->common_field.bit_length > 8)
- obj_desc->common_field.access_bit_width =
- ACPI_ROUND_UP(obj_desc->common_field.
- bit_length, 8);
+ if (obj_desc->common_field.bit_length > 8) {
+ unsigned width =
+ ACPI_ROUND_BITS_UP_TO_BYTES(
+ obj_desc->common_field.bit_length);
+ // access_bit_width is u8, don't overflow it
+ if (width > 8)
+ width = 8;
obj_desc->common_field.access_byte_width =
- ACPI_DIV_8(obj_desc->common_field.
- access_bit_width);
+ width;
+ obj_desc->common_field.access_bit_width =
+ 8 * width;
+ }
}
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Ralf Baechle <[email protected]>
commit 3d45285dd1ff4d4a1361b95e2d6508579a4402b5 upstream.
The M3 workaround needs to cmpare the region and VPN2 fields only.
Signed-off-by: Ralf Baechle <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/mm/tlbex.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -741,10 +741,15 @@ static void __cpuinit build_r4000_tlb_re
* create the plain linear handler
*/
if (bcm1250_m3_war()) {
- UASM_i_MFC0(&p, K0, C0_BADVADDR);
- UASM_i_MFC0(&p, K1, C0_ENTRYHI);
+ unsigned int segbits = 44;
+
+ uasm_i_dmfc0(&p, K0, C0_BADVADDR);
+ uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
uasm_i_xor(&p, K0, K0, K1);
- UASM_i_SRL(&p, K0, K0, PAGE_SHIFT + 1);
+ uasm_i_dsrl32(&p, K1, K0, 62 - 32);
+ uasm_i_dsrl(&p, K0, K0, 12 + 1);
+ uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32);
+ uasm_i_or(&p, K0, K0, K1);
uasm_il_bnez(&p, &r, K0, label_leave);
/* No need for uasm_i_nop */
}
@@ -1260,10 +1265,15 @@ static void __cpuinit build_r4000_tlb_lo
memset(relocs, 0, sizeof(relocs));
if (bcm1250_m3_war()) {
- UASM_i_MFC0(&p, K0, C0_BADVADDR);
- UASM_i_MFC0(&p, K1, C0_ENTRYHI);
+ unsigned int segbits = 44;
+
+ uasm_i_dmfc0(&p, K0, C0_BADVADDR);
+ uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
uasm_i_xor(&p, K0, K0, K1);
- UASM_i_SRL(&p, K0, K0, PAGE_SHIFT + 1);
+ uasm_i_dsrl32(&p, K1, K0, 62 - 32);
+ uasm_i_dsrl(&p, K0, K0, 12 + 1);
+ uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32);
+ uasm_i_or(&p, K0, K0, K1);
uasm_il_bnez(&p, &r, K0, label_leave);
/* No need for uasm_i_nop */
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Avi Kivity <[email protected]>
(Cherry-picked from commit 78ac8b47c566dd6177a3b9b291b756ccb70670b7)
Currently we set eflags.vm unconditionally when entering real mode emulation
through virtual-8086 mode, and clear it unconditionally when we enter protected
mode. The means that the following sequence
KVM_SET_REGS (rflags.vm=1)
KVM_SET_SREGS (cr0.pe=1)
Ends up with rflags.vm clear due to KVM_SET_SREGS triggering enter_pmode().
Fix by shadowing rflags.vm (and rflags.iopl) correctly while in real mode:
reads and writes to those bits access a shadow register instead of the actual
register.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx.c | 24 +++++++++++++++---------
1 file changed, 15 insertions(+), 9 deletions(-)
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -61,6 +61,8 @@ module_param_named(unrestricted_guest,
static int __read_mostly emulate_invalid_guest_state = 0;
module_param(emulate_invalid_guest_state, bool, S_IRUGO);
+#define RMODE_GUEST_OWNED_EFLAGS_BITS (~(X86_EFLAGS_IOPL | X86_EFLAGS_VM))
+
/*
* These 2 parameters are used to config the controls for Pause-Loop Exiting:
* ple_gap: upper bound on the amount of time between two successive
@@ -115,7 +117,7 @@ struct vcpu_vmx {
} host_state;
struct {
int vm86_active;
- u8 save_iopl;
+ ulong save_rflags;
struct kvm_save_segment {
u16 selector;
unsigned long base;
@@ -787,18 +789,23 @@ static void vmx_fpu_deactivate(struct kv
static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
{
- unsigned long rflags;
+ unsigned long rflags, save_rflags;
rflags = vmcs_readl(GUEST_RFLAGS);
- if (to_vmx(vcpu)->rmode.vm86_active)
- rflags &= ~(unsigned long)(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
+ if (to_vmx(vcpu)->rmode.vm86_active) {
+ rflags &= RMODE_GUEST_OWNED_EFLAGS_BITS;
+ save_rflags = to_vmx(vcpu)->rmode.save_rflags;
+ rflags |= save_rflags & ~RMODE_GUEST_OWNED_EFLAGS_BITS;
+ }
return rflags;
}
static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
{
- if (to_vmx(vcpu)->rmode.vm86_active)
+ if (to_vmx(vcpu)->rmode.vm86_active) {
+ to_vmx(vcpu)->rmode.save_rflags = rflags;
rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
+ }
vmcs_writel(GUEST_RFLAGS, rflags);
}
@@ -1431,8 +1438,8 @@ static void enter_pmode(struct kvm_vcpu
vmcs_write32(GUEST_TR_AR_BYTES, vmx->rmode.tr.ar);
flags = vmcs_readl(GUEST_RFLAGS);
- flags &= ~(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
- flags |= (vmx->rmode.save_iopl << IOPL_SHIFT);
+ flags &= RMODE_GUEST_OWNED_EFLAGS_BITS;
+ flags |= vmx->rmode.save_rflags & ~RMODE_GUEST_OWNED_EFLAGS_BITS;
vmcs_writel(GUEST_RFLAGS, flags);
vmcs_writel(GUEST_CR4, (vmcs_readl(GUEST_CR4) & ~X86_CR4_VME) |
@@ -1501,8 +1508,7 @@ static void enter_rmode(struct kvm_vcpu
vmcs_write32(GUEST_TR_AR_BYTES, 0x008b);
flags = vmcs_readl(GUEST_RFLAGS);
- vmx->rmode.save_iopl
- = (flags & X86_EFLAGS_IOPL) >> IOPL_SHIFT;
+ vmx->rmode.save_rflags = flags;
flags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Matt Helsley <[email protected]>
commit 5a7aadfe2fcb0f69e2acc1fbefe22a096e792fc9 upstream.
When the cgroup freezer is used to freeze tasks we do not want to thaw
those tasks during resume. Currently we test the cgroup freezer
state of the resuming tasks to see if the cgroup is FROZEN. If so
then we don't thaw the task. However, the FREEZING state also indicates
that the task should remain frozen.
This also avoids a problem pointed out by Oren Ladaan: the freezer state
transition from FREEZING to FROZEN is updated lazily when userspace reads
or writes the freezer.state file in the cgroup filesystem. This means that
resume will thaw tasks in cgroups which should be in the FROZEN state if
there is no read/write of the freezer.state file to trigger this
transition before suspend.
NOTE: Another "simple" solution would be to always update the cgroup
freezer state during resume. However it's a bad choice for several reasons:
Updating the cgroup freezer state is somewhat expensive because it requires
walking all the tasks in the cgroup and checking if they are each frozen.
Worse, this could easily make resume run in N^2 time where N is the number
of tasks in the cgroup. Finally, updating the freezer state from this code
path requires trickier locking because of the way locks must be ordered.
Instead of updating the freezer state we rely on the fact that lazy
updates only manage the transition from FREEZING to FROZEN. We know that
a cgroup with the FREEZING state may actually be FROZEN so test for that
state too. This makes sense in the resume path even for partially-frozen
cgroups -- those that really are FREEZING but not FROZEN.
Reported-by: Oren Ladaan <[email protected]>
Signed-off-by: Matt Helsley <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/freezer.h | 7 +++++--
kernel/cgroup_freezer.c | 9 ++++++---
kernel/power/process.c | 2 +-
3 files changed, 12 insertions(+), 6 deletions(-)
--- a/include/linux/freezer.h
+++ b/include/linux/freezer.h
@@ -64,9 +64,12 @@ extern bool freeze_task(struct task_stru
extern void cancel_freezing(struct task_struct *p);
#ifdef CONFIG_CGROUP_FREEZER
-extern int cgroup_frozen(struct task_struct *task);
+extern int cgroup_freezing_or_frozen(struct task_struct *task);
#else /* !CONFIG_CGROUP_FREEZER */
-static inline int cgroup_frozen(struct task_struct *task) { return 0; }
+static inline int cgroup_freezing_or_frozen(struct task_struct *task)
+{
+ return 0;
+}
#endif /* !CONFIG_CGROUP_FREEZER */
/*
--- a/kernel/cgroup_freezer.c
+++ b/kernel/cgroup_freezer.c
@@ -47,17 +47,20 @@ static inline struct freezer *task_freez
struct freezer, css);
}
-int cgroup_frozen(struct task_struct *task)
+int cgroup_freezing_or_frozen(struct task_struct *task)
{
struct freezer *freezer;
enum freezer_state state;
task_lock(task);
freezer = task_freezer(task);
- state = freezer->state;
+ if (!freezer->css.cgroup->parent)
+ state = CGROUP_THAWED; /* root cgroup can't be frozen */
+ else
+ state = freezer->state;
task_unlock(task);
- return state == CGROUP_FROZEN;
+ return (state == CGROUP_FREEZING) || (state == CGROUP_FROZEN);
}
/*
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -145,7 +145,7 @@ static void thaw_tasks(bool nosig_only)
if (nosig_only && should_send_signal(p))
continue;
- if (cgroup_frozen(p))
+ if (cgroup_freezing_or_frozen(p))
continue;
thaw_process(p);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Seth Heasley <[email protected]>
commit d2f2fcd2541bae004db7f4798ffd9d2cb75ae817 upstream.
This patch adds the Intel Cougar Point (PCH) HD Audio Controller DeviceIDs.
Signed-off-by: Seth Heasley <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_intel.c | 3 +++
1 file changed, 3 insertions(+)
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -125,6 +125,7 @@ MODULE_SUPPORTED_DEVICE("{{Intel, ICH6},
"{Intel, ICH9},"
"{Intel, ICH10},"
"{Intel, PCH},"
+ "{Intel, CPT},"
"{Intel, SCH},"
"{ATI, SB450},"
"{ATI, SB600},"
@@ -2711,6 +2712,8 @@ static struct pci_device_id azx_ids[] =
{ PCI_DEVICE(0x8086, 0x3a6e), .driver_data = AZX_DRIVER_ICH },
/* PCH */
{ PCI_DEVICE(0x8086, 0x3b56), .driver_data = AZX_DRIVER_ICH },
+ /* CPT */
+ { PCI_DEVICE(0x8086, 0x1c20), .driver_data = AZX_DRIVER_ICH },
/* SCH */
{ PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH },
/* ATI SB 450/600 */
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Avi Kivity <[email protected]>
(Cherry-picked from commit d6a23895aa82353788a1cc5a1d9a1c963465463e)
These are guest-triggerable.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/x86.c | 27 ---------------------------
1 file changed, 27 deletions(-)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -384,21 +384,16 @@ out:
void kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
{
if (cr0 & CR0_RESERVED_BITS) {
- printk(KERN_DEBUG "set_cr0: 0x%lx #GP, reserved bits 0x%lx\n",
- cr0, vcpu->arch.cr0);
kvm_inject_gp(vcpu, 0);
return;
}
if ((cr0 & X86_CR0_NW) && !(cr0 & X86_CR0_CD)) {
- printk(KERN_DEBUG "set_cr0: #GP, CD == 0 && NW == 1\n");
kvm_inject_gp(vcpu, 0);
return;
}
if ((cr0 & X86_CR0_PG) && !(cr0 & X86_CR0_PE)) {
- printk(KERN_DEBUG "set_cr0: #GP, set PG flag "
- "and a clear PE flag\n");
kvm_inject_gp(vcpu, 0);
return;
}
@@ -409,15 +404,11 @@ void kvm_set_cr0(struct kvm_vcpu *vcpu,
int cs_db, cs_l;
if (!is_pae(vcpu)) {
- printk(KERN_DEBUG "set_cr0: #GP, start paging "
- "in long mode while PAE is disabled\n");
kvm_inject_gp(vcpu, 0);
return;
}
kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
if (cs_l) {
- printk(KERN_DEBUG "set_cr0: #GP, start paging "
- "in long mode while CS.L == 1\n");
kvm_inject_gp(vcpu, 0);
return;
@@ -425,8 +416,6 @@ void kvm_set_cr0(struct kvm_vcpu *vcpu,
} else
#endif
if (is_pae(vcpu) && !load_pdptrs(vcpu, vcpu->arch.cr3)) {
- printk(KERN_DEBUG "set_cr0: #GP, pdptrs "
- "reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
@@ -453,28 +442,23 @@ void kvm_set_cr4(struct kvm_vcpu *vcpu,
unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE;
if (cr4 & CR4_RESERVED_BITS) {
- printk(KERN_DEBUG "set_cr4: #GP, reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
if (is_long_mode(vcpu)) {
if (!(cr4 & X86_CR4_PAE)) {
- printk(KERN_DEBUG "set_cr4: #GP, clearing PAE while "
- "in long mode\n");
kvm_inject_gp(vcpu, 0);
return;
}
} else if (is_paging(vcpu) && (cr4 & X86_CR4_PAE)
&& ((cr4 ^ old_cr4) & pdptr_bits)
&& !load_pdptrs(vcpu, vcpu->arch.cr3)) {
- printk(KERN_DEBUG "set_cr4: #GP, pdptrs reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
if (cr4 & X86_CR4_VMXE) {
- printk(KERN_DEBUG "set_cr4: #GP, setting VMXE\n");
kvm_inject_gp(vcpu, 0);
return;
}
@@ -495,21 +479,16 @@ void kvm_set_cr3(struct kvm_vcpu *vcpu,
if (is_long_mode(vcpu)) {
if (cr3 & CR3_L_MODE_RESERVED_BITS) {
- printk(KERN_DEBUG "set_cr3: #GP, reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
} else {
if (is_pae(vcpu)) {
if (cr3 & CR3_PAE_RESERVED_BITS) {
- printk(KERN_DEBUG
- "set_cr3: #GP, reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
if (is_paging(vcpu) && !load_pdptrs(vcpu, cr3)) {
- printk(KERN_DEBUG "set_cr3: #GP, pdptrs "
- "reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
@@ -541,7 +520,6 @@ EXPORT_SYMBOL_GPL(kvm_set_cr3);
void kvm_set_cr8(struct kvm_vcpu *vcpu, unsigned long cr8)
{
if (cr8 & CR8_RESERVED_BITS) {
- printk(KERN_DEBUG "set_cr8: #GP, reserved bits 0x%lx\n", cr8);
kvm_inject_gp(vcpu, 0);
return;
}
@@ -595,15 +573,12 @@ static u32 emulated_msrs[] = {
static void set_efer(struct kvm_vcpu *vcpu, u64 efer)
{
if (efer & efer_reserved_bits) {
- printk(KERN_DEBUG "set_efer: 0x%llx #GP, reserved bits\n",
- efer);
kvm_inject_gp(vcpu, 0);
return;
}
if (is_paging(vcpu)
&& (vcpu->arch.shadow_efer & EFER_LME) != (efer & EFER_LME)) {
- printk(KERN_DEBUG "set_efer: #GP, change LME while paging\n");
kvm_inject_gp(vcpu, 0);
return;
}
@@ -613,7 +588,6 @@ static void set_efer(struct kvm_vcpu *vc
feat = kvm_find_cpuid_entry(vcpu, 0x80000001, 0);
if (!feat || !(feat->edx & bit(X86_FEATURE_FXSR_OPT))) {
- printk(KERN_DEBUG "set_efer: #GP, enable FFXSR w/o CPUID capability\n");
kvm_inject_gp(vcpu, 0);
return;
}
@@ -624,7 +598,6 @@ static void set_efer(struct kvm_vcpu *vc
feat = kvm_find_cpuid_entry(vcpu, 0x80000001, 0);
if (!feat || !(feat->ecx & bit(X86_FEATURE_SVM))) {
- printk(KERN_DEBUG "set_efer: #GP, enable SVM w/o SVM\n");
kvm_inject_gp(vcpu, 0);
return;
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Andre Przywara <[email protected]>
(Cherry-picked from commit 114be429c8cd44e57f312af2bbd6734e5a185b0d)
There is a quirk for AMD K8 CPUs in many Linux kernels (see
arch/x86/kernel/cpu/mcheck/mce.c:__mcheck_cpu_apply_quirks()) that
clears bit 10 in that MCE related MSR. KVM can only cope with all
zeros or all ones, so it will inject a #GP into the guest, which
will let it panic.
So lets add a quirk to the quirk and ignore this single cleared bit.
This fixes -cpu kvm64 on all machines and -cpu host on K8 machines
with some guest Linux kernels.
Signed-off-by: Andre Przywara <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/x86.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -886,9 +886,13 @@ static int set_msr_mce(struct kvm_vcpu *
if (msr >= MSR_IA32_MC0_CTL &&
msr < MSR_IA32_MC0_CTL + 4 * bank_num) {
u32 offset = msr - MSR_IA32_MC0_CTL;
- /* only 0 or all 1s can be written to IA32_MCi_CTL */
+ /* only 0 or all 1s can be written to IA32_MCi_CTL
+ * some Linux kernels though clear bit 10 in bank 4 to
+ * workaround a BIOS/GART TBL issue on AMD K8s, ignore
+ * this to avoid an uncatched #GP in the guest
+ */
if ((offset & 0x3) == 0 &&
- data != 0 && data != ~(u64)0)
+ data != 0 && (data | (1 << 10)) != ~(u64)0)
return -1;
vcpu->arch.mce_banks[offset] = data;
break;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Reinette Chatre <[email protected]>
commit bbcbb9ef9735c67da303d30bd6beb9e699f0f508 upstream.
There is a problem if an "internal short scan" is in progress when a
mac80211 requested scan arrives. If this new scan request arrives within
the "next_scan_jiffies" period then driver will immediately return success
and complete the scan. The problem here is that the scan has not been
fully initialized at this time (is_internal_short_scan is still set to true
because of the currently running scan), which results in the scan
completion never to be sent to mac80211. At this time also, evan though the
internal short scan is still running the state (is_internal_short_scan)
will be set to false, so when the internal scan does complete then mac80211
will receive a scan completion.
Fix this by checking right away if a scan is in progress when a scan
request arrives from mac80211.
Signed-off-by: Reinette Chatre <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-scan.c | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -404,21 +404,6 @@ EXPORT_SYMBOL(iwl_init_scan_params);
static int iwl_scan_initiate(struct iwl_priv *priv)
{
- if (!iwl_is_ready_rf(priv)) {
- IWL_DEBUG_SCAN(priv, "Aborting scan due to not ready.\n");
- return -EIO;
- }
-
- if (test_bit(STATUS_SCANNING, &priv->status)) {
- IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
- return -EAGAIN;
- }
-
- if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG_SCAN(priv, "Scan request while abort pending\n");
- return -EAGAIN;
- }
-
IWL_DEBUG_INFO(priv, "Starting scan...\n");
set_bit(STATUS_SCANNING, &priv->status);
priv->scan_start = jiffies;
@@ -449,6 +434,18 @@ int iwl_mac_hw_scan(struct ieee80211_hw
goto out_unlock;
}
+ if (test_bit(STATUS_SCANNING, &priv->status)) {
+ IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
+ ret = -EAGAIN;
+ goto out_unlock;
+ }
+
+ if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG_SCAN(priv, "Scan request while abort pending\n");
+ ret = -EAGAIN;
+ goto out_unlock;
+ }
+
/* We don't schedule scan within next_scan_jiffies period.
* Avoid scanning during possible EAPOL exchange, return
* success immediately.
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Dave Chinner <[email protected]>
commit 20f6b2c785cf187445f126321638ab8ba7aa7494 upstream.
xfssyncd processes a queue of work by detaching the queue and
then iterating over all the work items. It then sleeps for a
time period or until new work comes in. If new work is queued
while xfssyncd is actively processing the detached work queue,
it will not process that new work until after a sleep timeout
or the next work event queued wakes it.
Fix this by checking the work queue again before going to sleep.
Signed-off-by: Dave Chinner <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/xfs/linux-2.6/xfs_sync.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -613,7 +613,8 @@ xfssyncd(
set_freezable();
timeleft = xfs_syncd_centisecs * msecs_to_jiffies(10);
for (;;) {
- timeleft = schedule_timeout_interruptible(timeleft);
+ if (list_empty(&mp->m_sync_list))
+ timeleft = schedule_timeout_interruptible(timeleft);
/* swsusp */
try_to_freeze();
if (kthread_should_stop() && list_empty(&mp->m_sync_list))
@@ -633,8 +634,7 @@ xfssyncd(
list_add_tail(&mp->m_sync_work.w_list,
&mp->m_sync_list);
}
- list_for_each_entry_safe(work, n, &mp->m_sync_list, w_list)
- list_move(&work->w_list, &tmp);
+ list_splice_init(&mp->m_sync_list, &tmp);
spin_unlock(&mp->m_sync_lock);
list_for_each_entry_safe(work, n, &tmp, w_list) {
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Oliver Neukum <[email protected]>
commit 97d35f95552c9a0ee4777a7f04431a9fd1260478 upstream.
Update cdc-acm to the async methods eliminating the workqueue
[This fixes a reported lockup for the cdc-acm driver - gregkh]
Signed-off-by: Oliver Neukum <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-acm.c | 43 ++++++++++++++++++++++---------------------
drivers/usb/class/cdc-acm.h | 1 -
2 files changed, 22 insertions(+), 22 deletions(-)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -170,6 +170,7 @@ static void acm_write_done(struct acm *a
{
wb->use = 0;
acm->transmitting--;
+ usb_autopm_put_interface_async(acm->control);
}
/*
@@ -211,9 +212,12 @@ static int acm_write_start(struct acm *a
}
dbg("%s susp_count: %d", __func__, acm->susp_count);
+ usb_autopm_get_interface_async(acm->control);
if (acm->susp_count) {
- acm->delayed_wb = wb;
- schedule_work(&acm->waker);
+ if (!acm->delayed_wb)
+ acm->delayed_wb = wb;
+ else
+ usb_autopm_put_interface_async(acm->control);
spin_unlock_irqrestore(&acm->write_lock, flags);
return 0; /* A white lie */
}
@@ -534,23 +538,6 @@ static void acm_softint(struct work_stru
tty_kref_put(tty);
}
-static void acm_waker(struct work_struct *waker)
-{
- struct acm *acm = container_of(waker, struct acm, waker);
- int rv;
-
- rv = usb_autopm_get_interface(acm->control);
- if (rv < 0) {
- dev_err(&acm->dev->dev, "Autopm failure in %s\n", __func__);
- return;
- }
- if (acm->delayed_wb) {
- acm_start_wb(acm, acm->delayed_wb);
- acm->delayed_wb = NULL;
- }
- usb_autopm_put_interface(acm->control);
-}
-
/*
* TTY handlers
*/
@@ -1178,7 +1165,6 @@ made_compressed_probe:
acm->urb_task.func = acm_rx_tasklet;
acm->urb_task.data = (unsigned long) acm;
INIT_WORK(&acm->work, acm_softint);
- INIT_WORK(&acm->waker, acm_waker);
init_waitqueue_head(&acm->drain_wait);
spin_lock_init(&acm->throttle_lock);
spin_lock_init(&acm->write_lock);
@@ -1343,7 +1329,6 @@ static void stop_data_traffic(struct acm
tasklet_enable(&acm->urb_task);
cancel_work_sync(&acm->work);
- cancel_work_sync(&acm->waker);
}
static void acm_disconnect(struct usb_interface *intf)
@@ -1435,6 +1420,7 @@ static int acm_suspend(struct usb_interf
static int acm_resume(struct usb_interface *intf)
{
struct acm *acm = usb_get_intfdata(intf);
+ struct acm_wb *wb;
int rv = 0;
int cnt;
@@ -1449,6 +1435,21 @@ static int acm_resume(struct usb_interfa
mutex_lock(&acm->mutex);
if (acm->port.count) {
rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO);
+
+ spin_lock_irq(&acm->write_lock);
+ if (acm->delayed_wb) {
+ wb = acm->delayed_wb;
+ acm->delayed_wb = NULL;
+ spin_unlock_irq(&acm->write_lock);
+ acm_start_wb(acm, acm->delayed_wb);
+ } else {
+ spin_unlock_irq(&acm->write_lock);
+ }
+
+ /*
+ * delayed error checking because we must
+ * do the write path at all cost
+ */
if (rv < 0)
goto err_out;
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -112,7 +112,6 @@ struct acm {
struct mutex mutex;
struct usb_cdc_line_coding line; /* bits, stop, parity */
struct work_struct work; /* work queue entry for line discipline waking up */
- struct work_struct waker;
wait_queue_head_t drain_wait; /* close processing */
struct tasklet_struct urb_task; /* rx processing */
spinlock_t throttle_lock; /* synchronize throtteling and read callback */
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Alexey Starikovskiy <[email protected]>
commit dadf28a10c3eb29421837a2e413ab869ebd upstream
http://bugzilla.kernel.org/show_bug.cgi?id=14667
[bwh: Backport to 2.6.32; same applies to 2.6.33]
Signed-off-by: Alexey Starikovskiy <[email protected]>
Signed-off-by: Len Brown <[email protected]>
Cc: Ben Hutchings <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/acpica/exprep.c | 12 ++++++++++++
drivers/acpi/ec.c | 35 +++++++++--------------------------
2 files changed, 21 insertions(+), 26 deletions(-)
--- a/drivers/acpi/acpica/exprep.c
+++ b/drivers/acpi/acpica/exprep.c
@@ -468,6 +468,18 @@ acpi_status acpi_ex_prep_field_value(str
acpi_ut_add_reference(obj_desc->field.region_obj);
+ /* allow full data read from EC address space */
+ if (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_EC) {
+ if (obj_desc->common_field.bit_length > 8)
+ obj_desc->common_field.access_bit_width =
+ ACPI_ROUND_UP(obj_desc->common_field.
+ bit_length, 8);
+ obj_desc->common_field.access_byte_width =
+ ACPI_DIV_8(obj_desc->common_field.
+ access_bit_width);
+ }
+
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
obj_desc->field.start_field_bit_offset,
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -589,12 +589,12 @@ static u32 acpi_ec_gpe_handler(void *dat
static acpi_status
acpi_ec_space_handler(u32 function, acpi_physical_address address,
- u32 bits, acpi_integer *value,
+ u32 bits, acpi_integer *value64,
void *handler_context, void *region_context)
{
struct acpi_ec *ec = handler_context;
- int result = 0, i;
- u8 temp = 0;
+ int result = 0, i, bytes = bits / 8;
+ u8 *value = (u8 *)value64;
if ((address > 0xFF) || !value || !handler_context)
return AE_BAD_PARAMETER;
@@ -602,32 +602,15 @@ acpi_ec_space_handler(u32 function, acpi
if (function != ACPI_READ && function != ACPI_WRITE)
return AE_BAD_PARAMETER;
- if (bits != 8 && acpi_strict)
- return AE_BAD_PARAMETER;
-
- if (EC_FLAGS_MSI)
+ if (EC_FLAGS_MSI || bits > 8)
acpi_ec_burst_enable(ec);
- if (function == ACPI_READ) {
- result = acpi_ec_read(ec, address, &temp);
- *value = temp;
- } else {
- temp = 0xff & (*value);
- result = acpi_ec_write(ec, address, temp);
- }
-
- for (i = 8; unlikely(bits - i > 0); i += 8) {
- ++address;
- if (function == ACPI_READ) {
- result = acpi_ec_read(ec, address, &temp);
- (*value) |= ((acpi_integer)temp) << i;
- } else {
- temp = 0xff & ((*value) >> i);
- result = acpi_ec_write(ec, address, temp);
- }
- }
+ for (i = 0; i < bytes; ++i, ++address, ++value)
+ result = (function == ACPI_READ) ?
+ acpi_ec_read(ec, address, value) :
+ acpi_ec_write(ec, address, *value);
- if (EC_FLAGS_MSI)
+ if (EC_FLAGS_MSI || bits > 8)
acpi_ec_burst_disable(ec);
switch (result) {
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Joerg Roedel <[email protected]>
commit 4b83873d3da0704987cb116833818ed96214ee29 upstream.
If we boot into a crash-kernel the gart might still be
enabled and its caches might be dirty. This can result in
undefined behavior later. Fix it by explicitly disabling the
gart hardware before initialization and flushing the caches
after enablement.
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/aperture_64.c | 15 ++++++++++++++-
arch/x86/kernel/pci-gart_64.c | 3 +++
2 files changed, 17 insertions(+), 1 deletion(-)
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -394,6 +394,7 @@ void __init gart_iommu_hole_init(void)
for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
int bus;
int dev_base, dev_limit;
+ u32 ctl;
bus = bus_dev_ranges[i].bus;
dev_base = bus_dev_ranges[i].dev_base;
@@ -407,7 +408,19 @@ void __init gart_iommu_hole_init(void)
gart_iommu_aperture = 1;
x86_init.iommu.iommu_init = gart_iommu_init;
- aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7;
+ ctl = read_pci_config(bus, slot, 3,
+ AMD64_GARTAPERTURECTL);
+
+ /*
+ * Before we do anything else disable the GART. It may
+ * still be enabled if we boot into a crash-kernel here.
+ * Reconfiguring the GART while it is enabled could have
+ * unknown side-effects.
+ */
+ ctl &= ~GARTEN;
+ write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl);
+
+ aper_order = (ctl >> 1) & 7;
aper_size = (32 * 1024 * 1024) << aper_order;
aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff;
aper_base <<= 25;
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -564,6 +564,9 @@ static void enable_gart_translations(voi
enable_gart_translation(dev, __pa(agp_gatt_table));
}
+
+ /* Flush the GART-TLB to remove stale entries */
+ k8_flush_garts();
}
/*
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Paul Mundt <[email protected]>
commit ded1d8f29b4d315a2093cafc3ee17ac870a87972 upstream.
When pci_register_set_vga_state() was made __init, the EXPORT_SYMBOL() was
retained, which now leaves us with a section mismatch.
Signed-off-by: Paul Mundt <[email protected]>
Cc: Mike Travis <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Jesse Barnes <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pci.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2865,7 +2865,6 @@ EXPORT_SYMBOL(pcim_pin_device);
EXPORT_SYMBOL(pci_disable_device);
EXPORT_SYMBOL(pci_find_capability);
EXPORT_SYMBOL(pci_bus_find_capability);
-EXPORT_SYMBOL(pci_register_set_vga_state);
EXPORT_SYMBOL(pci_release_regions);
EXPORT_SYMBOL(pci_request_regions);
EXPORT_SYMBOL(pci_request_regions_exclusive);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Peter Zijlstra <[email protected]>
original patch commit ids: 452a339a976e7f782c786eb3f73080401e2fa3a6 and
134fbadf028a5977a1b06b0253d3ee33e6f0c642
perf_events, x86: Implement Intel Westmere support
The new Intel documentation includes Westmere arch specific
event maps that are significantly different from the Nehalem
ones. Add support for this generation.
Found the CPUID model numbers on wikipedia.
Also ammend some Nehalem constraints, spotted those when looking
for the differences between Nehalem and Westmere.
Signed-off-by: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Stephane Eranian <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
perf, x86: Enable Nehalem-EX support
According to Intel Software Devel Manual Volume 3B, the
Nehalem-EX PMU is just like regular Nehalem (except for the
uncore support, which is completely different).
Signed-off-by: Vince Weaver <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Lin Ming <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Youquan Song <[email protected]>
---
---
arch/x86/kernel/cpu/perf_event.c | 104 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 103 insertions(+), 1 deletion(-)
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -245,6 +245,97 @@ static u64 __read_mostly hw_cache_event_
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX];
+static const u64 westmere_hw_cache_event_ids
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x010b, /* MEM_INST_RETIRED.LOADS */
+ [ C(RESULT_MISS) ] = 0x0151, /* L1D.REPL */
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0x020b, /* MEM_INST_RETURED.STORES */
+ [ C(RESULT_MISS) ] = 0x0251, /* L1D.M_REPL */
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0x014e, /* L1D_PREFETCH.REQUESTS */
+ [ C(RESULT_MISS) ] = 0x024e, /* L1D_PREFETCH.MISS */
+ },
+ },
+ [ C(L1I ) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0380, /* L1I.READS */
+ [ C(RESULT_MISS) ] = 0x0280, /* L1I.MISSES */
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0,
+ [ C(RESULT_MISS) ] = 0x0,
+ },
+ },
+ [ C(LL ) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0324, /* L2_RQSTS.LOADS */
+ [ C(RESULT_MISS) ] = 0x0224, /* L2_RQSTS.LD_MISS */
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0c24, /* L2_RQSTS.RFOS */
+ [ C(RESULT_MISS) ] = 0x0824, /* L2_RQSTS.RFO_MISS */
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0x4f2e, /* LLC Reference */
+ [ C(RESULT_MISS) ] = 0x412e, /* LLC Misses */
+ },
+ },
+ [ C(DTLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x010b, /* MEM_INST_RETIRED.LOADS */
+ [ C(RESULT_MISS) ] = 0x0108, /* DTLB_LOAD_MISSES.ANY */
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0x020b, /* MEM_INST_RETURED.STORES */
+ [ C(RESULT_MISS) ] = 0x010c, /* MEM_STORE_RETIRED.DTLB_MISS */
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0,
+ [ C(RESULT_MISS) ] = 0x0,
+ },
+ },
+ [ C(ITLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x01c0, /* INST_RETIRED.ANY_P */
+ [ C(RESULT_MISS) ] = 0x0185, /* ITLB_MISSES.ANY */
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+ [ C(BPU ) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ALL_BRANCHES */
+ [ C(RESULT_MISS) ] = 0x03e8, /* BPU_CLEARS.ANY */
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+};
+
static __initconst u64 nehalem_hw_cache_event_ids
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
@@ -2118,6 +2209,7 @@ static __init int intel_pmu_init(void)
* Install the hw-cache-events table:
*/
switch (boot_cpu_data.x86_model) {
+
case 15: /* original 65 nm celeron/pentium/core2/xeon, "Merom"/"Conroe" */
case 22: /* single-core 65 nm celeron/core2solo "Merom-L"/"Conroe-L" */
case 23: /* current 45 nm celeron/core2/xeon "Penryn"/"Wolfdale" */
@@ -2129,7 +2221,9 @@ static __init int intel_pmu_init(void)
event_constraints = intel_core_event_constraints;
break;
default:
- case 26:
+ case 26: /* 45 nm nehalem, "Bloomfield" */
+ case 30: /* 45 nm nehalem, "Lynnfield" */
+ case 46: /* 45 nm nehalem-ex, "Beckton" */
memcpy(hw_cache_event_ids, nehalem_hw_cache_event_ids,
sizeof(hw_cache_event_ids));
@@ -2142,6 +2236,14 @@ static __init int intel_pmu_init(void)
pr_cont("Atom events, ");
break;
+
+ case 37: /* 32 nm nehalem, "Clarkdale" */
+ case 44: /* 32 nm nehalem, "Gulftown" */
+ memcpy(hw_cache_event_ids, westmere_hw_cache_event_ids,
+ sizeof(hw_cache_event_ids));
+
+ pr_cont("Westmere events, ");
+ break;
}
return 0;
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Tyler Hicks <[email protected]>
commit 3a60a1686f0d51c99bd0df8ac93050fb6dfce647 upstream.
Create a getattr handler for eCryptfs symlinks that is capable of
reading the lower target and decrypting its path. Prior to this patch,
a stat's st_size field would represent the strlen of the encrypted path,
while readlink() would return the strlen of the decrypted path. This
could lead to confusion in some userspace applications, since the two
values should be equal.
https://bugs.launchpad.net/bugs/524919
Reported-by: Loïc Minier <[email protected]>
Signed-off-by: Tyler Hicks <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ecryptfs/inode.c | 100 +++++++++++++++++++++++++++-------------------------
1 file changed, 52 insertions(+), 48 deletions(-)
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -647,38 +647,17 @@ out_lock:
return rc;
}
-static int
-ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
+static int ecryptfs_readlink_lower(struct dentry *dentry, char **buf,
+ size_t *bufsiz)
{
+ struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
char *lower_buf;
- size_t lower_bufsiz;
- struct dentry *lower_dentry;
- struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
- char *plaintext_name;
- size_t plaintext_name_size;
+ size_t lower_bufsiz = PATH_MAX;
mm_segment_t old_fs;
int rc;
- lower_dentry = ecryptfs_dentry_to_lower(dentry);
- if (!lower_dentry->d_inode->i_op->readlink) {
- rc = -EINVAL;
- goto out;
- }
- mount_crypt_stat = &ecryptfs_superblock_to_private(
- dentry->d_sb)->mount_crypt_stat;
- /*
- * If the lower filename is encrypted, it will result in a significantly
- * longer name. If needed, truncate the name after decode and decrypt.
- */
- if (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)
- lower_bufsiz = PATH_MAX;
- else
- lower_bufsiz = bufsiz;
- /* Released in this function */
lower_buf = kmalloc(lower_bufsiz, GFP_KERNEL);
- if (lower_buf == NULL) {
- printk(KERN_ERR "%s: Out of memory whilst attempting to "
- "kmalloc [%zd] bytes\n", __func__, lower_bufsiz);
+ if (!lower_buf) {
rc = -ENOMEM;
goto out;
}
@@ -688,29 +667,31 @@ ecryptfs_readlink(struct dentry *dentry,
(char __user *)lower_buf,
lower_bufsiz);
set_fs(old_fs);
- if (rc >= 0) {
- rc = ecryptfs_decode_and_decrypt_filename(&plaintext_name,
- &plaintext_name_size,
- dentry, lower_buf,
- rc);
- if (rc) {
- printk(KERN_ERR "%s: Error attempting to decode and "
- "decrypt filename; rc = [%d]\n", __func__,
- rc);
- goto out_free_lower_buf;
- }
- /* Check for bufsiz <= 0 done in sys_readlinkat() */
- rc = copy_to_user(buf, plaintext_name,
- min((size_t) bufsiz, plaintext_name_size));
- if (rc)
- rc = -EFAULT;
- else
- rc = plaintext_name_size;
- kfree(plaintext_name);
- fsstack_copy_attr_atime(dentry->d_inode, lower_dentry->d_inode);
- }
-out_free_lower_buf:
+ if (rc < 0)
+ goto out;
+ lower_bufsiz = rc;
+ rc = ecryptfs_decode_and_decrypt_filename(buf, bufsiz, dentry,
+ lower_buf, lower_bufsiz);
+out:
kfree(lower_buf);
+ return rc;
+}
+
+static int
+ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
+{
+ char *kbuf;
+ size_t kbufsiz, copied;
+ int rc;
+
+ rc = ecryptfs_readlink_lower(dentry, &kbuf, &kbufsiz);
+ if (rc)
+ goto out;
+ copied = min_t(size_t, bufsiz, kbufsiz);
+ rc = copy_to_user(buf, kbuf, copied) ? -EFAULT : copied;
+ kfree(kbuf);
+ fsstack_copy_attr_atime(dentry->d_inode,
+ ecryptfs_dentry_to_lower(dentry)->d_inode);
out:
return rc;
}
@@ -1015,6 +996,28 @@ out:
return rc;
}
+int ecryptfs_getattr_link(struct vfsmount *mnt, struct dentry *dentry,
+ struct kstat *stat)
+{
+ struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
+ int rc = 0;
+
+ mount_crypt_stat = &ecryptfs_superblock_to_private(
+ dentry->d_sb)->mount_crypt_stat;
+ generic_fillattr(dentry->d_inode, stat);
+ if (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES) {
+ char *target;
+ size_t targetsiz;
+
+ rc = ecryptfs_readlink_lower(dentry, &target, &targetsiz);
+ if (!rc) {
+ kfree(target);
+ stat->size = targetsiz;
+ }
+ }
+ return rc;
+}
+
int ecryptfs_getattr(struct vfsmount *mnt, struct dentry *dentry,
struct kstat *stat)
{
@@ -1132,6 +1135,7 @@ const struct inode_operations ecryptfs_s
.put_link = ecryptfs_put_link,
.permission = ecryptfs_permission,
.setattr = ecryptfs_setattr,
+ .getattr = ecryptfs_getattr_link,
.setxattr = ecryptfs_setxattr,
.getxattr = ecryptfs_getxattr,
.listxattr = ecryptfs_listxattr,
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jeff Mahoney <[email protected]>
commit 133b8f9d632cc23715c6d72d1c5ac449e054a12a upstream.
Since tmpfs has no persistent storage, it pins all its dentries in memory
so they have d_count=1 when other file systems would have d_count=0.
->lookup is only used to create new dentries. If the caller doesn't
instantiate it, it's freed immediately at dput(). ->readdir reads
directly from the dcache and depends on the dentries being hashed.
When an ecryptfs mount is mounted, it associates the lower file and dentry
with the ecryptfs files as they're accessed. When it's umounted and
destroys all the in-memory ecryptfs inodes, it fput's the lower_files and
d_drop's the lower_dentries. Commit 4981e081 added this and a d_delete in
2008 and several months later commit caeeeecf removed the d_delete. I
believe the d_drop() needs to be removed as well.
The d_drop effectively hides any file that has been accessed via ecryptfs
from the underlying tmpfs since it depends on it being hashed for it to
be accessible. I've removed the d_drop on my development node and see no
ill effects with basic testing on both tmpfs and persistent storage.
As a side effect, after ecryptfs d_drops the dentries on tmpfs, tmpfs
BUGs on umount. This is due to the dentries being unhashed.
tmpfs->kill_sb is kill_litter_super which calls d_genocide to drop
the reference pinning the dentry. It skips unhashed and negative dentries,
but shrink_dcache_for_umount_subtree doesn't. Since those dentries
still have an elevated d_count, we get a BUG().
This patch removes the d_drop call and fixes both issues.
This issue was reported at:
https://bugzilla.novell.com/show_bug.cgi?id=567887
Reported-by: Árpád Bíró <[email protected]>
Signed-off-by: Jeff Mahoney <[email protected]>
Cc: Dustin Kirkland <[email protected]>
Signed-off-by: Tyler Hicks <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ecryptfs/super.c | 1 -
1 file changed, 1 deletion(-)
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -85,7 +85,6 @@ static void ecryptfs_destroy_inode(struc
if (lower_dentry->d_inode) {
fput(inode_info->lower_file);
inode_info->lower_file = NULL;
- d_drop(lower_dentry);
}
}
ecryptfs_destroy_crypt_stat(&inode_info->crypt_stat);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Takuya Yoshikawa <[email protected]>
(Cherry-picked from commit 87bf6e7de1134f48681fd2ce4b7c1ec45458cb6d)
Int is not long enough to store the size of a dirty bitmap.
This patch fixes this problem with the introduction of a wrapper
function to calculate the sizes of dirty bitmaps.
Note: in mark_page_dirty(), we have to consider the fact that
__set_bit() takes the offset as int, not long.
Signed-off-by: Takuya Yoshikawa <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/ia64/kvm/kvm-ia64.c | 9 +++++----
arch/powerpc/kvm/book3s.c | 5 +++--
arch/x86/kvm/x86.c | 4 ++--
include/linux/kvm_host.h | 5 +++++
virt/kvm/kvm_main.c | 13 ++++++++-----
5 files changed, 23 insertions(+), 13 deletions(-)
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1794,7 +1794,8 @@ static int kvm_ia64_sync_dirty_log(struc
{
struct kvm_memory_slot *memslot;
int r, i;
- long n, base;
+ long base;
+ unsigned long n;
unsigned long *dirty_bitmap = (unsigned long *)(kvm->arch.vm_base +
offsetof(struct kvm_vm_data, kvm_mem_dirty_log));
@@ -1807,7 +1808,7 @@ static int kvm_ia64_sync_dirty_log(struc
if (!memslot->dirty_bitmap)
goto out;
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
base = memslot->base_gfn / BITS_PER_LONG;
for (i = 0; i < n/sizeof(long); ++i) {
@@ -1823,7 +1824,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kv
struct kvm_dirty_log *log)
{
int r;
- int n;
+ unsigned long n;
struct kvm_memory_slot *memslot;
int is_dirty = 0;
@@ -1841,7 +1842,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kv
if (is_dirty) {
kvm_flush_remote_tlbs(kvm);
memslot = &kvm->memslots[log->slot];
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
memset(memslot->dirty_bitmap, 0, n);
}
r = 0;
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -848,7 +848,8 @@ int kvm_vm_ioctl_get_dirty_log(struct kv
struct kvm_vcpu *vcpu;
ulong ga, ga_end;
int is_dirty = 0;
- int r, n;
+ int r;
+ unsigned long n;
down_write(&kvm->slots_lock);
@@ -866,7 +867,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kv
kvm_for_each_vcpu(n, vcpu, kvm)
kvmppc_mmu_pte_pflush(vcpu, ga, ga_end);
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
memset(memslot->dirty_bitmap, 0, n);
}
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2343,7 +2343,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kv
struct kvm_dirty_log *log)
{
int r;
- int n;
+ unsigned long n;
struct kvm_memory_slot *memslot;
int is_dirty = 0;
@@ -2359,7 +2359,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kv
kvm_mmu_slot_remove_write_access(kvm, log->slot);
spin_unlock(&kvm->mmu_lock);
memslot = &kvm->memslots[log->slot];
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
memset(memslot->dirty_bitmap, 0, n);
}
r = 0;
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -116,6 +116,11 @@ struct kvm_memory_slot {
int user_alloc;
};
+static inline unsigned long kvm_dirty_bitmap_bytes(struct kvm_memory_slot *memslot)
+{
+ return ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+}
+
struct kvm_kernel_irq_routing_entry {
u32 gsi;
u32 type;
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -636,7 +636,7 @@ skip_lpage:
/* Allocate page dirty bitmap if needed */
if ((new.flags & KVM_MEM_LOG_DIRTY_PAGES) && !new.dirty_bitmap) {
- unsigned dirty_bytes = ALIGN(npages, BITS_PER_LONG) / 8;
+ unsigned long dirty_bytes = kvm_dirty_bitmap_bytes(&new);
new.dirty_bitmap = vmalloc(dirty_bytes);
if (!new.dirty_bitmap)
@@ -719,7 +719,7 @@ int kvm_get_dirty_log(struct kvm *kvm,
{
struct kvm_memory_slot *memslot;
int r, i;
- int n;
+ unsigned long n;
unsigned long any = 0;
r = -EINVAL;
@@ -731,7 +731,7 @@ int kvm_get_dirty_log(struct kvm *kvm,
if (!memslot->dirty_bitmap)
goto out;
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
for (i = 0; !any && i < n/sizeof(long); ++i)
any = memslot->dirty_bitmap[i];
@@ -1073,10 +1073,13 @@ void mark_page_dirty(struct kvm *kvm, gf
memslot = gfn_to_memslot_unaliased(kvm, gfn);
if (memslot && memslot->dirty_bitmap) {
unsigned long rel_gfn = gfn - memslot->base_gfn;
+ unsigned long *p = memslot->dirty_bitmap +
+ rel_gfn / BITS_PER_LONG;
+ int offset = rel_gfn % BITS_PER_LONG;
/* avoid RMW */
- if (!generic_test_le_bit(rel_gfn, memslot->dirty_bitmap))
- generic___set_le_bit(rel_gfn, memslot->dirty_bitmap);
+ if (!generic_test_le_bit(offset, p))
+ generic___set_le_bit(offset, p);
}
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Christian Pulvermacher <[email protected]>
commit cfce08c6bdfb20ade979284e55001ca1f100ed51 upstream.
If the lower file system driver has extended attributes disabled,
ecryptfs' own access functions return -ENOSYS instead of -EOPNOTSUPP.
This breaks execution of programs in the ecryptfs mount, since the
kernel expects the latter error when checking for security
capabilities in xattrs.
Signed-off-by: Christian Pulvermacher <[email protected]>
Signed-off-by: Tyler Hicks <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ecryptfs/inode.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -1042,7 +1042,7 @@ ecryptfs_setxattr(struct dentry *dentry,
lower_dentry = ecryptfs_dentry_to_lower(dentry);
if (!lower_dentry->d_inode->i_op->setxattr) {
- rc = -ENOSYS;
+ rc = -EOPNOTSUPP;
goto out;
}
mutex_lock(&lower_dentry->d_inode->i_mutex);
@@ -1060,7 +1060,7 @@ ecryptfs_getxattr_lower(struct dentry *l
int rc = 0;
if (!lower_dentry->d_inode->i_op->getxattr) {
- rc = -ENOSYS;
+ rc = -EOPNOTSUPP;
goto out;
}
mutex_lock(&lower_dentry->d_inode->i_mutex);
@@ -1087,7 +1087,7 @@ ecryptfs_listxattr(struct dentry *dentry
lower_dentry = ecryptfs_dentry_to_lower(dentry);
if (!lower_dentry->d_inode->i_op->listxattr) {
- rc = -ENOSYS;
+ rc = -EOPNOTSUPP;
goto out;
}
mutex_lock(&lower_dentry->d_inode->i_mutex);
@@ -1104,7 +1104,7 @@ static int ecryptfs_removexattr(struct d
lower_dentry = ecryptfs_dentry_to_lower(dentry);
if (!lower_dentry->d_inode->i_op->removexattr) {
- rc = -ENOSYS;
+ rc = -EOPNOTSUPP;
goto out;
}
mutex_lock(&lower_dentry->d_inode->i_mutex);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Mathieu Desnoyers <[email protected]>
The __module_ref_addr() problem disappears in 2.6.34-rc kernels because these
percpu accesses were re-factored.
__module_ref_addr() should use per_cpu_ptr() to obfuscate the pointer
(RELOC_HIDE is needed for per cpu pointers).
This non-standard per-cpu pointer use has been introduced by commit
720eba31f47aeade8ec130ca7f4353223c49170f
It causes a NULL pointer exception on some configurations when CONFIG_TRACING is
enabled on 2.6.33. This patch fixes the problem (acknowledged by Randy who
reported the bug).
It did not appear to hurt previously because most of the accesses were done
through local_inc, which probably obfuscated the access enough that no compiler
optimizations were done. But with local_read() done when CONFIG_TRACING is
active, this becomes a problem. Non-CONFIG_TRACING is probably affected as well
(module.c contains local_set and local_read that use __module_ref_addr()), but I
guess nobody noticed because we've been lucky enough that the compiler did not
generate the inappropriate optimization pattern there.
This patch should be queued for the 2.6.29.x through 2.6.33.x stable branches.
(tested on 2.6.33.1 x86_64)
Signed-off-by: Mathieu Desnoyers <[email protected]>
Tested-by: Randy Dunlap <[email protected]>
CC: Eric Dumazet <[email protected]>
CC: Rusty Russell <[email protected]>
CC: Peter Zijlstra <[email protected]>
CC: Tejun Heo <[email protected]>
CC: Ingo Molnar <[email protected]>
CC: Andrew Morton <[email protected]>
CC: Linus Torvalds <[email protected]>
CC: Greg Kroah-Hartman <[email protected]>
CC: Steven Rostedt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/module.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -457,7 +457,7 @@ void symbol_put_addr(void *addr);
static inline local_t *__module_ref_addr(struct module *mod, int cpu)
{
#ifdef CONFIG_SMP
- return (local_t *) (mod->refptr + per_cpu_offset(cpu));
+ return (local_t *) per_cpu_ptr(mod->refptr, cpu);
#else
return &mod->ref;
#endif
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Seth Heasley <[email protected]>
commit 93da6202264ce1256b04db8008a43882ae62d060 upstream.
This patch adds the Intel Cougar Point (PCH) LPC and SMBus Controller DeviceIDs.
Signed-off-by: Seth Heasley <[email protected]>
Signed-off-by: Jesse Barnes <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/pci/irq.c | 2 ++
include/linux/pci_ids.h | 3 +++
2 files changed, 5 insertions(+)
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -590,6 +590,8 @@ static __init int intel_router_probe(str
case PCI_DEVICE_ID_INTEL_ICH10_1:
case PCI_DEVICE_ID_INTEL_ICH10_2:
case PCI_DEVICE_ID_INTEL_ICH10_3:
+ case PCI_DEVICE_ID_INTEL_CPT_LPC1:
+ case PCI_DEVICE_ID_INTEL_CPT_LPC2:
r->name = "PIIX/ICH";
r->get = pirq_piix_get;
r->set = pirq_piix_set;
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2417,6 +2417,9 @@
#define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21
#define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30
#define PCI_DEVICE_ID_INTEL_IOAT 0x1a38
+#define PCI_DEVICE_ID_INTEL_CPT_SMBUS 0x1c22
+#define PCI_DEVICE_ID_INTEL_CPT_LPC1 0x1c42
+#define PCI_DEVICE_ID_INTEL_CPT_LPC2 0x1c43
#define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410
#define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411
#define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Eli Cohen <[email protected]>
commit f0dc117abdfa9a0e96c3d013d836460ef3cd08c7 upstream.
The IPoIB UD QP reports send completions to priv->send_cq, which is
usually left unarmed; it only gets armed when the number of
outstanding send requests reaches the size of the TX queue. This
arming is done only in the send path for the UD QP. However, when
sending CM packets, the net queue may be stopped for the same reasons
but no measures are taken to recover the UD path from a lockup.
Consider this scenario: a host sends high rate of both CM and UD
packets, with a TX queue length of N. If at some time the number of
outstanding UD packets is more than N/2 and the overall outstanding
packets is N-1, and CM sends a packet (making the number of
outstanding sends equal N), the TX queue will be stopped. When all
the CM packets complete, the number of outstanding packets will still
be higher than N/2 so the TX queue will not be restarted.
Fix this by calling ib_req_notify_cq() when the queue is stopped in
the CM path.
Signed-off-by: Eli Cohen <[email protected]>
Signed-off-by: Roland Dreier <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/ulp/ipoib/ipoib_cm.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -752,6 +752,8 @@ void ipoib_cm_send(struct net_device *de
if (++priv->tx_outstanding == ipoib_sendq_size) {
ipoib_dbg(priv, "TX ring 0x%x full, stopping kernel net queue\n",
tx->qp->qp_num);
+ if (ib_req_notify_cq(priv->send_cq, IB_CQ_NEXT_COMP))
+ ipoib_warn(priv, "request notify on send CQ failed\n");
netif_stop_queue(dev);
}
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Takuya Yoshikawa <[email protected]>
(Cherry-picked from commit b7af40433870aa0636932ad39b0c48a0cb319057)
svm_create_vcpu() does not free the pages allocated during the creation
when it fails to complete the allocations. This patch fixes it.
Signed-off-by: Takuya Yoshikawa <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/svm.c | 25 +++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -698,29 +698,28 @@ static struct kvm_vcpu *svm_create_vcpu(
if (err)
goto free_svm;
+ err = -ENOMEM;
page = alloc_page(GFP_KERNEL);
- if (!page) {
- err = -ENOMEM;
+ if (!page)
goto uninit;
- }
- err = -ENOMEM;
msrpm_pages = alloc_pages(GFP_KERNEL, MSRPM_ALLOC_ORDER);
if (!msrpm_pages)
- goto uninit;
+ goto free_page1;
nested_msrpm_pages = alloc_pages(GFP_KERNEL, MSRPM_ALLOC_ORDER);
if (!nested_msrpm_pages)
- goto uninit;
-
- svm->msrpm = page_address(msrpm_pages);
- svm_vcpu_init_msrpm(svm->msrpm);
+ goto free_page2;
hsave_page = alloc_page(GFP_KERNEL);
if (!hsave_page)
- goto uninit;
+ goto free_page3;
+
svm->nested.hsave = page_address(hsave_page);
+ svm->msrpm = page_address(msrpm_pages);
+ svm_vcpu_init_msrpm(svm->msrpm);
+
svm->nested.msrpm = page_address(nested_msrpm_pages);
svm->vmcb = page_address(page);
@@ -737,6 +736,12 @@ static struct kvm_vcpu *svm_create_vcpu(
return &svm->vcpu;
+free_page3:
+ __free_pages(nested_msrpm_pages, MSRPM_ALLOC_ORDER);
+free_page2:
+ __free_pages(msrpm_pages, MSRPM_ALLOC_ORDER);
+free_page1:
+ __free_page(page);
uninit:
kvm_vcpu_uninit(&svm->vcpu);
free_svm:
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Seth Heasley <[email protected]>
commit 88e8201e67aace3d86de9e75122ea525f0e7248e upstream.
Signed-off-by: Seth Heasley <[email protected]>
Signed-off-by: Jeff Garzik <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/ata_piix.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -291,6 +291,14 @@ static const struct pci_device_id piix_p
{ 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (PCH) */
{ 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ /* SATA Controller IDE (CPT) */
+ { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ /* SATA Controller IDE (CPT) */
+ { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ /* SATA Controller IDE (CPT) */
+ { 0x8086, 0x1c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (CPT) */
+ { 0x8086, 0x1c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
{ } /* terminate list */
};
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Linus Torvalds <[email protected]>
commit 59c33fa7791e9948ba467c2b83e307a0d087ab49 upstream.
This makes gcc use the right register names and instruction operand sizes
automatically for the rwsem inline asm statements.
So instead of using "(%%eax)" to specify the memory address that is the
semaphore, we use "(%1)" or similar. And instead of forcing the operation
to always be 32-bit, we use "%z0", taking the size from the actual
semaphore data structure itself.
This doesn't actually matter on x86-32, but if we want to use the same
inline asm for x86-64, we'll need to have the compiler generate the proper
64-bit names for the registers (%rax instead of %eax), and if we want to
use a 64-bit counter too (in order to avoid the 15-bit limit on the
write counter that limits concurrent users to 32767 threads), we'll need
to be able to generate instructions with "q" accesses rather than "l".
Since this header currently isn't enabled on x86-64, none of that matters,
but we do want to use the xadd version of the semaphores rather than have
to take spinlocks to do a rwsem. The mm->mmap_sem can be heavily contended
when you have lots of threads all taking page faults, and the fallback
rwsem code that uses a spinlock performs abysmally badly in that case.
[ hpa: modified the patch to skip size suffixes entirely when they are
redundant due to register operands. ]
Signed-off-by: Linus Torvalds <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/rwsem.h | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -105,7 +105,7 @@ do { \
static inline void __down_read(struct rw_semaphore *sem)
{
asm volatile("# beginning down_read\n\t"
- LOCK_PREFIX " incl (%%eax)\n\t"
+ LOCK_PREFIX " inc%z0 (%1)\n\t"
/* adds 0x00000001, returns the old value */
" jns 1f\n"
" call call_rwsem_down_read_failed\n"
@@ -123,12 +123,12 @@ static inline int __down_read_trylock(st
{
__s32 result, tmp;
asm volatile("# beginning __down_read_trylock\n\t"
- " movl %0,%1\n\t"
+ " mov %0,%1\n\t"
"1:\n\t"
- " movl %1,%2\n\t"
- " addl %3,%2\n\t"
+ " mov %1,%2\n\t"
+ " add %3,%2\n\t"
" jle 2f\n\t"
- LOCK_PREFIX " cmpxchgl %2,%0\n\t"
+ LOCK_PREFIX " cmpxchg %2,%0\n\t"
" jnz 1b\n\t"
"2:\n\t"
"# ending __down_read_trylock\n\t"
@@ -147,9 +147,9 @@ static inline void __down_write_nested(s
tmp = RWSEM_ACTIVE_WRITE_BIAS;
asm volatile("# beginning down_write\n\t"
- LOCK_PREFIX " xadd %%edx,(%%eax)\n\t"
+ LOCK_PREFIX " xadd %1,(%2)\n\t"
/* subtract 0x0000ffff, returns the old value */
- " testl %%edx,%%edx\n\t"
+ " test %1,%1\n\t"
/* was the count 0 before? */
" jz 1f\n"
" call call_rwsem_down_write_failed\n"
@@ -185,7 +185,7 @@ static inline void __up_read(struct rw_s
{
__s32 tmp = -RWSEM_ACTIVE_READ_BIAS;
asm volatile("# beginning __up_read\n\t"
- LOCK_PREFIX " xadd %%edx,(%%eax)\n\t"
+ LOCK_PREFIX " xadd %1,(%2)\n\t"
/* subtracts 1, returns the old value */
" jns 1f\n\t"
" call call_rwsem_wake\n"
@@ -201,18 +201,18 @@ static inline void __up_read(struct rw_s
*/
static inline void __up_write(struct rw_semaphore *sem)
{
+ unsigned long tmp;
asm volatile("# beginning __up_write\n\t"
- " movl %2,%%edx\n\t"
- LOCK_PREFIX " xaddl %%edx,(%%eax)\n\t"
+ LOCK_PREFIX " xadd %1,(%2)\n\t"
/* tries to transition
0xffff0001 -> 0x00000000 */
" jz 1f\n"
" call call_rwsem_wake\n"
"1:\n\t"
"# ending __up_write\n"
- : "+m" (sem->count)
- : "a" (sem), "i" (-RWSEM_ACTIVE_WRITE_BIAS)
- : "memory", "cc", "edx");
+ : "+m" (sem->count), "=d" (tmp)
+ : "a" (sem), "1" (-RWSEM_ACTIVE_WRITE_BIAS)
+ : "memory", "cc");
}
/*
@@ -221,7 +221,7 @@ static inline void __up_write(struct rw_
static inline void __downgrade_write(struct rw_semaphore *sem)
{
asm volatile("# beginning __downgrade_write\n\t"
- LOCK_PREFIX " addl %2,(%%eax)\n\t"
+ LOCK_PREFIX " add%z0 %2,(%1)\n\t"
/* transitions 0xZZZZ0001 -> 0xYYYY0001 */
" jns 1f\n\t"
" call call_rwsem_downgrade_wake\n"
@@ -237,7 +237,7 @@ static inline void __downgrade_write(str
*/
static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
{
- asm volatile(LOCK_PREFIX "addl %1,%0"
+ asm volatile(LOCK_PREFIX "add%z0 %1,%0"
: "+m" (sem->count)
: "ir" (delta));
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Linus Torvalds <[email protected]>
commit 9e3bd9190800e8209b4a3e1d724c35f0738dcad2 upstream.
This makes the b43 driver just automatically fall back to PIO mode when
DMA doesn't work.
The driver already told the user to do it, so rather than have the user
reload the module with a new flag, just make the driver do it
automatically. We keep the message as an indication that something is
wrong, but now just automatically fall back to the hopefully working PIO
case.
(Some post-2.6.33 merge fixups by Larry Finger <[email protected]>
and yours truly... -- JWL)
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/b43/Kconfig | 19 +++++++++++++++++--
drivers/net/wireless/b43/b43.h | 7 +++++++
drivers/net/wireless/b43/main.c | 14 ++++++++------
3 files changed, 32 insertions(+), 8 deletions(-)
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -3,7 +3,6 @@ config B43
depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
select SSB
select FW_LOADER
- select SSB_BLOCKIO
---help---
b43 is a driver for the Broadcom 43xx series wireless devices.
@@ -79,6 +78,14 @@ config B43_SDIO
If unsure, say N.
+#Data transfers to the device via PIO. We want it as a fallback even
+# if we can do DMA.
+config B43_PIO
+ bool
+ depends on B43
+ select SSB_BLOCKIO
+ default y
+
config B43_NPHY
bool "Pre IEEE 802.11n support (BROKEN)"
depends on B43 && EXPERIMENTAL && BROKEN
@@ -130,4 +137,12 @@ config B43_DEBUG
for production use.
Only say Y, if you are debugging a problem in the b43 driver sourcecode.
-
+config B43_FORCE_PIO
+ bool "Force usage of PIO instead of DMA"
+ depends on B43 && B43_DEBUG
+ ---help---
+ This will disable DMA and always enable PIO instead.
+
+ Say N!
+ This is only for debugging the PIO engine code. You do
+ _NOT_ want to enable this.
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -694,6 +694,7 @@ struct b43_wldev {
bool radio_hw_enable; /* saved state of radio hardware enabled state */
bool qos_enabled; /* TRUE, if QoS is used. */
bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */
+ bool use_pio; /* TRUE if next init should use PIO */
/* PHY/Radio device. */
struct b43_phy phy;
@@ -878,6 +879,12 @@ static inline bool b43_using_pio_transfe
return dev->__using_pio_transfers;
}
+#ifdef CONFIG_B43_FORCE_PIO
+# define B43_PIO_DEFAULT 1
+#else
+# define B43_PIO_DEFAULT 0
+#endif
+
/* Message printing */
void b43info(struct b43_wl *wl, const char *fmt, ...)
__attribute__ ((format(printf, 2, 3)));
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -102,9 +102,9 @@ int b43_modparam_verbose = B43_VERBOSITY
module_param_named(verbose, b43_modparam_verbose, int, 0644);
MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug");
-static int modparam_pio;
-module_param_named(pio, modparam_pio, int, 0444);
-MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode");
+int b43_modparam_pio = B43_PIO_DEFAULT;
+module_param_named(pio, b43_modparam_pio, int, 0644);
+MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
static const struct ssb_device_id b43_ssb_tbl[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
@@ -1793,8 +1793,9 @@ static void b43_do_interrupt_thread(stru
dma_reason[4], dma_reason[5]);
b43err(dev->wl, "This device does not support DMA "
"on your system. Please use PIO instead.\n");
- b43err(dev->wl, "Unload the b43 module and reload "
- "with 'pio=1'\n");
+ /* Fall back to PIO transfers if we get fatal DMA errors! */
+ dev->use_pio = 1;
+ b43_controller_restart(dev, "DMA error");
return;
}
if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
@@ -4361,7 +4362,7 @@ static int b43_wireless_core_init(struct
if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) ||
(dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) ||
- modparam_pio) {
+ dev->use_pio) {
dev->__using_pio_transfers = 1;
err = b43_pio_init(dev);
} else {
@@ -4829,6 +4830,7 @@ static int b43_one_core_attach(struct ss
if (!wldev)
goto out;
+ wldev->use_pio = b43_modparam_pio;
wldev->dev = dev;
wldev->wl = wl;
b43_set_status(wldev, B43_STAT_UNINIT);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Mark Fasheh <[email protected]>
commit fcefd25ac89239cb57fa198f125a79ff85468c75 upstream.
ocfs2_set_acl() and ocfs2_init_acl() were setting i_mode on the in-memory
inode, but never setting it on the disk copy. Thus, acls were some times not
getting propagated between nodes. This patch fixes the issue by adding a
helper function ocfs2_acl_set_mode() which does this the right way.
ocfs2_set_acl() and ocfs2_init_acl() are then updated to call
ocfs2_acl_set_mode().
Signed-off-by: Mark Fasheh <[email protected]>
Signed-off-by: Joel Becker <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/acl.c | 77 +++++++++++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 72 insertions(+), 5 deletions(-)
--- a/fs/ocfs2/acl.c
+++ b/fs/ocfs2/acl.c
@@ -30,6 +30,8 @@
#include "alloc.h"
#include "dlmglue.h"
#include "file.h"
+#include "inode.h"
+#include "journal.h"
#include "ocfs2_fs.h"
#include "xattr.h"
@@ -166,6 +168,60 @@ static struct posix_acl *ocfs2_get_acl(s
}
/*
+ * Helper function to set i_mode in memory and disk. Some call paths
+ * will not have di_bh or a journal handle to pass, in which case it
+ * will create it's own.
+ */
+static int ocfs2_acl_set_mode(struct inode *inode, struct buffer_head *di_bh,
+ handle_t *handle, umode_t new_mode)
+{
+ int ret, commit_handle = 0;
+ struct ocfs2_dinode *di;
+
+ if (di_bh == NULL) {
+ ret = ocfs2_read_inode_block(inode, &di_bh);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+ } else
+ get_bh(di_bh);
+
+ if (handle == NULL) {
+ handle = ocfs2_start_trans(OCFS2_SB(inode->i_sb),
+ OCFS2_INODE_UPDATE_CREDITS);
+ if (IS_ERR(handle)) {
+ ret = PTR_ERR(handle);
+ mlog_errno(ret);
+ goto out_brelse;
+ }
+
+ commit_handle = 1;
+ }
+
+ di = (struct ocfs2_dinode *)di_bh->b_data;
+ ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), di_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (ret) {
+ mlog_errno(ret);
+ goto out_commit;
+ }
+
+ inode->i_mode = new_mode;
+ di->i_mode = cpu_to_le16(inode->i_mode);
+
+ ocfs2_journal_dirty(handle, di_bh);
+
+out_commit:
+ if (commit_handle)
+ ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
+out_brelse:
+ brelse(di_bh);
+out:
+ return ret;
+}
+
+/*
* Set the access or default ACL of an inode.
*/
static int ocfs2_set_acl(handle_t *handle,
@@ -193,9 +249,14 @@ static int ocfs2_set_acl(handle_t *handl
if (ret < 0)
return ret;
else {
- inode->i_mode = mode;
if (ret == 0)
acl = NULL;
+
+ ret = ocfs2_acl_set_mode(inode, di_bh,
+ handle, mode);
+ if (ret)
+ return ret;
+
}
}
break;
@@ -283,6 +344,7 @@ int ocfs2_init_acl(handle_t *handle,
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
struct posix_acl *acl = NULL;
int ret = 0;
+ mode_t mode;
if (!S_ISLNK(inode->i_mode)) {
if (osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL) {
@@ -291,12 +353,17 @@ int ocfs2_init_acl(handle_t *handle,
if (IS_ERR(acl))
return PTR_ERR(acl);
}
- if (!acl)
- inode->i_mode &= ~current_umask();
+ if (!acl) {
+ mode = inode->i_mode & ~current_umask();
+ ret = ocfs2_acl_set_mode(inode, di_bh, handle, mode);
+ if (ret) {
+ mlog_errno(ret);
+ goto cleanup;
+ }
+ }
}
if ((osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL) && acl) {
struct posix_acl *clone;
- mode_t mode;
if (S_ISDIR(inode->i_mode)) {
ret = ocfs2_set_acl(handle, inode, di_bh,
@@ -313,7 +380,7 @@ int ocfs2_init_acl(handle_t *handle,
mode = inode->i_mode;
ret = posix_acl_create_masq(clone, &mode);
if (ret >= 0) {
- inode->i_mode = mode;
+ ret = ocfs2_acl_set_mode(inode, di_bh, handle, mode);
if (ret > 0) {
ret = ocfs2_set_acl(handle, inode,
di_bh, ACL_TYPE_ACCESS,
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Mathieu Desnoyers <[email protected]>
Mainline does not need this fix, as commit
259354deaaf03d49a02dbb9975d6ec2a54675672 fixed the problem by refactoring.
Should use per_cpu_ptr() to obfuscate the per cpu pointers (RELOC_HIDE is needed
for per cpu pointers).
Introduced by commit:
module.c: commit 6b588c18f8dacfa6d7957c33c5ff832096e752d3
This patch should be queued for the stable branch, for kernels 2.6.29.x to
2.6.33.x. (tested on 2.6.33.1 x86_64)
Signed-off-by: Mathieu Desnoyers <[email protected]>
CC: Randy Dunlap <[email protected]>
CC: Eric Dumazet <[email protected]>
CC: Rusty Russell <[email protected]>
CC: Peter Zijlstra <[email protected]>
CC: Tejun Heo <[email protected]>
CC: Ingo Molnar <[email protected]>
CC: Andrew Morton <[email protected]>
CC: Linus Torvalds <[email protected]>
CC: Greg Kroah-Hartman <[email protected]>
CC: Steven Rostedt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/module.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -405,7 +405,7 @@ static void percpu_modcopy(void *pcpudes
int cpu;
for_each_possible_cpu(cpu)
- memcpy(pcpudest + per_cpu_offset(cpu), from, size);
+ memcpy(per_cpu_ptr(pcpudest, cpu), from, size);
}
#else /* ... !CONFIG_SMP */
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Sachin Prabhu <[email protected]>
commit f78233dd44a110c574fe760ad6f9c1e8741a0d00 upstream.
While investigating a bug, I came across a possible bug in v9fs. The
problem is similar to the one reported for NFS by ASANO Masahiro in
http://lkml.org/lkml/2005/12/21/334.
v9fs_file_lock() will skip locks on file which has mode set to 02666.
This is a problem in cases where the mode of the file is changed after
a process has obtained a lock on the file. Such a lock will be skipped
during unlock and the machine will end up with a BUG in
locks_remove_flock().
v9fs_file_lock() should skip the check for mandatory locks when
unlocking a file.
Signed-off-by: Sachin Prabhu <[email protected]>
Signed-off-by: Eric Van Hensbergen <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/9p/vfs_file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -114,7 +114,7 @@ static int v9fs_file_lock(struct file *f
P9_DPRINTK(P9_DEBUG_VFS, "filp: %p lock: %p\n", filp, fl);
/* No mandatory locks */
- if (__mandatory_lock(inode))
+ if (__mandatory_lock(inode) && fl->fl_type != F_UNLCK)
return -ENOLCK;
if ((IS_SETLK(cmd) || IS_SETLKW(cmd)) && fl->fl_type != F_UNLCK) {
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Seth Heasley <[email protected]>
commit 32679f95cac3b1bdf27dce8b5273e06af186fd91 upstream.
This patch enables snoop, eliminating static during playback.
This patch supersedes the previous Cougar Point audio patch.
Signed-off-by: Seth Heasley <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_intel.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -450,6 +450,7 @@ struct azx {
/* driver types */
enum {
AZX_DRIVER_ICH,
+ AZX_DRIVER_PCH,
AZX_DRIVER_SCH,
AZX_DRIVER_ATI,
AZX_DRIVER_ATIHDMI,
@@ -464,6 +465,7 @@ enum {
static char *driver_short_names[] __devinitdata = {
[AZX_DRIVER_ICH] = "HDA Intel",
+ [AZX_DRIVER_PCH] = "HDA Intel PCH",
[AZX_DRIVER_SCH] = "HDA Intel MID",
[AZX_DRIVER_ATI] = "HDA ATI SB",
[AZX_DRIVER_ATIHDMI] = "HDA ATI HDMI",
@@ -1066,6 +1068,7 @@ static void azx_init_pci(struct azx *chi
0x01, NVIDIA_HDA_ENABLE_COHBIT);
break;
case AZX_DRIVER_SCH:
+ case AZX_DRIVER_PCH:
pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop);
if (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) {
pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC,
@@ -2434,6 +2437,7 @@ static int __devinit azx_create(struct s
if (bdl_pos_adj[dev] < 0) {
switch (chip->driver_type) {
case AZX_DRIVER_ICH:
+ case AZX_DRIVER_PCH:
bdl_pos_adj[dev] = 1;
break;
default:
@@ -2713,7 +2717,7 @@ static struct pci_device_id azx_ids[] =
/* PCH */
{ PCI_DEVICE(0x8086, 0x3b56), .driver_data = AZX_DRIVER_ICH },
/* CPT */
- { PCI_DEVICE(0x8086, 0x1c20), .driver_data = AZX_DRIVER_ICH },
+ { PCI_DEVICE(0x8086, 0x1c20), .driver_data = AZX_DRIVER_PCH },
/* SCH */
{ PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH },
/* ATI SB 450/600 */
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Andrew Perepechko <[email protected]>
commit 08261673cb6dc638c39f44d69b76fffb57b92a8b upstream.
dq_flags are modified non-atomically in do_set_dqblk via __set_bit calls and
atomically for example in mark_dquot_dirty or clear_dquot_dirty. Hence a
change done by an atomic operation can be overwritten by a change done by a
non-atomic one. Fix the problem by using atomic bitops even in do_set_dqblk.
Signed-off-by: Andrew Perepechko <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/quota/dquot.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -2321,34 +2321,34 @@ static int do_set_dqblk(struct dquot *dq
if (di->dqb_valid & QIF_SPACE) {
dm->dqb_curspace = di->dqb_curspace - dm->dqb_rsvspace;
check_blim = 1;
- __set_bit(DQ_LASTSET_B + QIF_SPACE_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_SPACE_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_BLIMITS) {
dm->dqb_bsoftlimit = qbtos(di->dqb_bsoftlimit);
dm->dqb_bhardlimit = qbtos(di->dqb_bhardlimit);
check_blim = 1;
- __set_bit(DQ_LASTSET_B + QIF_BLIMITS_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_BLIMITS_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_INODES) {
dm->dqb_curinodes = di->dqb_curinodes;
check_ilim = 1;
- __set_bit(DQ_LASTSET_B + QIF_INODES_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_INODES_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_ILIMITS) {
dm->dqb_isoftlimit = di->dqb_isoftlimit;
dm->dqb_ihardlimit = di->dqb_ihardlimit;
check_ilim = 1;
- __set_bit(DQ_LASTSET_B + QIF_ILIMITS_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_ILIMITS_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_BTIME) {
dm->dqb_btime = di->dqb_btime;
check_blim = 1;
- __set_bit(DQ_LASTSET_B + QIF_BTIME_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_BTIME_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_ITIME) {
dm->dqb_itime = di->dqb_itime;
check_ilim = 1;
- __set_bit(DQ_LASTSET_B + QIF_ITIME_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_ITIME_B, &dquot->dq_flags);
}
if (check_blim) {
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: NeilBrown <[email protected]>
commit 35f2a591192d0a5d9f7fc696869c76f0b8e49c3d upstream.
With many large drives and small chunk sizes it is possible
to create a RAID5 with more than 2^31 chunks. Make sure this
works.
Reported-by: Brett King <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid5.c | 19 +++++++------------
1 file changed, 7 insertions(+), 12 deletions(-)
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1649,8 +1649,8 @@ static sector_t raid5_compute_sector(rai
int previous, int *dd_idx,
struct stripe_head *sh)
{
- long stripe;
- unsigned long chunk_number;
+ sector_t stripe;
+ sector_t chunk_number;
unsigned int chunk_offset;
int pd_idx, qd_idx;
int ddf_layout = 0;
@@ -1670,17 +1670,12 @@ static sector_t raid5_compute_sector(rai
*/
chunk_offset = sector_div(r_sector, sectors_per_chunk);
chunk_number = r_sector;
- BUG_ON(r_sector != chunk_number);
/*
* Compute the stripe number
*/
- stripe = chunk_number / data_disks;
-
- /*
- * Compute the data disk and parity disk indexes inside the stripe
- */
- *dd_idx = chunk_number % data_disks;
+ stripe = chunk_number;
+ *dd_idx = sector_div(stripe, data_disks);
/*
* Select the parity disk based on the user selected algorithm.
@@ -1869,14 +1864,14 @@ static sector_t compute_blocknr(struct s
: conf->algorithm;
sector_t stripe;
int chunk_offset;
- int chunk_number, dummy1, dd_idx = i;
+ sector_t chunk_number;
+ int dummy1, dd_idx = i;
sector_t r_sector;
struct stripe_head sh2;
chunk_offset = sector_div(new_sector, sectors_per_chunk);
stripe = new_sector;
- BUG_ON(new_sector != stripe);
if (i == sh->pd_idx)
return 0;
@@ -1969,7 +1964,7 @@ static sector_t compute_blocknr(struct s
}
chunk_number = stripe * data_disks + i;
- r_sector = (sector_t)chunk_number * sectors_per_chunk + chunk_offset;
+ r_sector = chunk_number * sectors_per_chunk + chunk_offset;
check = raid5_compute_sector(conf, r_sector,
previous, &dummy1, &sh2);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Larry Finger <[email protected]>
commit b02914af4d7020828ce921a572589dd793517c09 upstream.
If userencounter the "Fatal DMA Problem" with a BCM43XX device, and
still wish to use b43 as the driver, their only option is to rebuild
the kernel with CONFIG_B43_FORCE_PIO. This patch removes this option and
allows PIO mode to be selected with a load-time parameter for the module.
Note that the configuration variable CONFIG_B43_PIO is also removed.
Once the DMA problem with the BCM4312 devices is solved, this patch will
likely be reverted.
Signed-off-by: Larry Finger <[email protected]>
Tested-by: John Daiker <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/b43/Kconfig | 19 +-----------------
drivers/net/wireless/b43/Makefile | 2 -
drivers/net/wireless/b43/b43.h | 13 ------------
drivers/net/wireless/b43/dma.c | 2 -
drivers/net/wireless/b43/main.c | 9 +++++---
drivers/net/wireless/b43/pio.h | 40 --------------------------------------
6 files changed, 9 insertions(+), 76 deletions(-)
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -3,6 +3,7 @@ config B43
depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
select SSB
select FW_LOADER
+ select SSB_BLOCKIO
---help---
b43 is a driver for the Broadcom 43xx series wireless devices.
@@ -78,14 +79,6 @@ config B43_SDIO
If unsure, say N.
-# Data transfers to the device via PIO
-# This is only needed on PCMCIA and SDIO devices. All others can do DMA properly.
-config B43_PIO
- bool
- depends on B43 && (B43_SDIO || B43_PCMCIA || B43_FORCE_PIO)
- select SSB_BLOCKIO
- default y
-
config B43_NPHY
bool "Pre IEEE 802.11n support (BROKEN)"
depends on B43 && EXPERIMENTAL && BROKEN
@@ -137,12 +130,4 @@ config B43_DEBUG
for production use.
Only say Y, if you are debugging a problem in the b43 driver sourcecode.
-config B43_FORCE_PIO
- bool "Force usage of PIO instead of DMA"
- depends on B43 && B43_DEBUG
- ---help---
- This will disable DMA and always enable PIO instead.
-
- Say N!
- This is only for debugging the PIO engine code. You do
- _NOT_ want to enable this.
+
--- a/drivers/net/wireless/b43/Makefile
+++ b/drivers/net/wireless/b43/Makefile
@@ -12,7 +12,7 @@ b43-y += xmit.o
b43-y += lo.o
b43-y += wa.o
b43-y += dma.o
-b43-$(CONFIG_B43_PIO) += pio.o
+b43-y += pio.o
b43-y += rfkill.o
b43-$(CONFIG_B43_LEDS) += leds.o
b43-$(CONFIG_B43_PCMCIA) += pcmcia.o
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -822,11 +822,9 @@ struct b43_wl {
/* The device LEDs. */
struct b43_leds leds;
-#ifdef CONFIG_B43_PIO
/* Kmalloc'ed scratch space for PIO TX/RX. Protected by wl->mutex. */
u8 pio_scratchspace[110] __attribute__((__aligned__(8)));
u8 pio_tailspace[4] __attribute__((__aligned__(8)));
-#endif /* CONFIG_B43_PIO */
};
static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw)
@@ -877,20 +875,9 @@ static inline void b43_write32(struct b4
static inline bool b43_using_pio_transfers(struct b43_wldev *dev)
{
-#ifdef CONFIG_B43_PIO
return dev->__using_pio_transfers;
-#else
- return 0;
-#endif
}
-#ifdef CONFIG_B43_FORCE_PIO
-# define B43_FORCE_PIO 1
-#else
-# define B43_FORCE_PIO 0
-#endif
-
-
/* Message printing */
void b43info(struct b43_wl *wl, const char *fmt, ...)
__attribute__ ((format(printf, 2, 3)));
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1653,7 +1653,6 @@ void b43_dma_tx_resume(struct b43_wldev
b43_power_saving_ctl_bits(dev, 0);
}
-#ifdef CONFIG_B43_PIO
static void direct_fifo_rx(struct b43_wldev *dev, enum b43_dmatype type,
u16 mmio_base, bool enable)
{
@@ -1687,4 +1686,3 @@ void b43_dma_direct_fifo_rx(struct b43_w
mmio_base = b43_dmacontroller_base(type, engine_index);
direct_fifo_rx(dev, type, mmio_base, enable);
}
-#endif /* CONFIG_B43_PIO */
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -102,6 +102,9 @@ int b43_modparam_verbose = B43_VERBOSITY
module_param_named(verbose, b43_modparam_verbose, int, 0644);
MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug");
+static int modparam_pio;
+module_param_named(pio, modparam_pio, int, 0444);
+MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode");
static const struct ssb_device_id b43_ssb_tbl[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
@@ -1790,8 +1793,8 @@ static void b43_do_interrupt_thread(stru
dma_reason[4], dma_reason[5]);
b43err(dev->wl, "This device does not support DMA "
"on your system. Please use PIO instead.\n");
- b43err(dev->wl, "CONFIG_B43_FORCE_PIO must be set in "
- "your kernel configuration.\n");
+ b43err(dev->wl, "Unload the b43 module and reload "
+ "with 'pio=1'\n");
return;
}
if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
@@ -4358,7 +4361,7 @@ static int b43_wireless_core_init(struct
if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) ||
(dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) ||
- B43_FORCE_PIO) {
+ modparam_pio) {
dev->__using_pio_transfers = 1;
err = b43_pio_init(dev);
} else {
--- a/drivers/net/wireless/b43/pio.h
+++ b/drivers/net/wireless/b43/pio.h
@@ -55,8 +55,6 @@
#define B43_PIO_MAX_NR_TXPACKETS 32
-#ifdef CONFIG_B43_PIO
-
struct b43_pio_txpacket {
/* Pointer to the TX queue we belong to. */
struct b43_pio_txqueue *queue;
@@ -169,42 +167,4 @@ void b43_pio_rx(struct b43_pio_rxqueue *
void b43_pio_tx_suspend(struct b43_wldev *dev);
void b43_pio_tx_resume(struct b43_wldev *dev);
-
-#else /* CONFIG_B43_PIO */
-
-
-static inline int b43_pio_init(struct b43_wldev *dev)
-{
- return 0;
-}
-static inline void b43_pio_free(struct b43_wldev *dev)
-{
-}
-static inline void b43_pio_stop(struct b43_wldev *dev)
-{
-}
-static inline int b43_pio_tx(struct b43_wldev *dev,
- struct sk_buff *skb)
-{
- return 0;
-}
-static inline void b43_pio_handle_txstatus(struct b43_wldev *dev,
- const struct b43_txstatus *status)
-{
-}
-static inline void b43_pio_get_tx_stats(struct b43_wldev *dev,
- struct ieee80211_tx_queue_stats *stats)
-{
-}
-static inline void b43_pio_rx(struct b43_pio_rxqueue *q)
-{
-}
-static inline void b43_pio_tx_suspend(struct b43_wldev *dev)
-{
-}
-static inline void b43_pio_tx_resume(struct b43_wldev *dev)
-{
-}
-
-#endif /* CONFIG_B43_PIO */
#endif /* B43_PIO_H_ */
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Peter Rajnoha <[email protected]>
commit 3abf85b5b5851b5f28d3d8a920ebb844edd08352 upstream.
Set a new DM_UEVENT_GENERATED_FLAG when returning from ioctls to
indicate that a uevent was actually generated. This tells the userspace
caller that it may need to wait for the event to be processed.
Signed-off-by: Peter Rajnoha <[email protected]>
Signed-off-by: Alasdair G Kergon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-ioctl.c | 19 ++++++++++++-------
drivers/md/dm.c | 7 ++++---
drivers/md/dm.h | 4 ++--
include/linux/dm-ioctl.h | 9 +++++++--
4 files changed, 25 insertions(+), 14 deletions(-)
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -285,7 +285,8 @@ retry:
up_write(&_hash_lock);
}
-static int dm_hash_rename(uint32_t cookie, const char *old, const char *new)
+static int dm_hash_rename(uint32_t cookie, uint32_t *flags, const char *old,
+ const char *new)
{
char *new_name, *old_name;
struct hash_cell *hc;
@@ -344,7 +345,8 @@ static int dm_hash_rename(uint32_t cooki
dm_table_put(table);
}
- dm_kobject_uevent(hc->md, KOBJ_CHANGE, cookie);
+ if (!dm_kobject_uevent(hc->md, KOBJ_CHANGE, cookie))
+ *flags |= DM_UEVENT_GENERATED_FLAG;
dm_put(hc->md);
up_write(&_hash_lock);
@@ -736,10 +738,10 @@ static int dev_remove(struct dm_ioctl *p
__hash_remove(hc);
up_write(&_hash_lock);
- dm_kobject_uevent(md, KOBJ_REMOVE, param->event_nr);
+ if (!dm_kobject_uevent(md, KOBJ_REMOVE, param->event_nr))
+ param->flags |= DM_UEVENT_GENERATED_FLAG;
dm_put(md);
- param->data_size = 0;
return 0;
}
@@ -773,7 +775,9 @@ static int dev_rename(struct dm_ioctl *p
return r;
param->data_size = 0;
- return dm_hash_rename(param->event_nr, param->name, new_name);
+
+ return dm_hash_rename(param->event_nr, ¶m->flags, param->name,
+ new_name);
}
static int dev_set_geometry(struct dm_ioctl *param, size_t param_size)
@@ -899,8 +903,8 @@ static int do_resume(struct dm_ioctl *pa
if (dm_suspended_md(md)) {
r = dm_resume(md);
- if (!r)
- dm_kobject_uevent(md, KOBJ_CHANGE, param->event_nr);
+ if (!r && !dm_kobject_uevent(md, KOBJ_CHANGE, param->event_nr))
+ param->flags |= DM_UEVENT_GENERATED_FLAG;
}
if (old_map)
@@ -1477,6 +1481,7 @@ static int validate_params(uint cmd, str
{
/* Always clear this flag */
param->flags &= ~DM_BUFFER_FULL_FLAG;
+ param->flags &= ~DM_UEVENT_GENERATED_FLAG;
/* Ignores parameters */
if (cmd == DM_REMOVE_ALL_CMD ||
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2618,18 +2618,19 @@ out:
/*-----------------------------------------------------------------
* Event notification.
*---------------------------------------------------------------*/
-void dm_kobject_uevent(struct mapped_device *md, enum kobject_action action,
+int dm_kobject_uevent(struct mapped_device *md, enum kobject_action action,
unsigned cookie)
{
char udev_cookie[DM_COOKIE_LENGTH];
char *envp[] = { udev_cookie, NULL };
if (!cookie)
- kobject_uevent(&disk_to_dev(md->disk)->kobj, action);
+ return kobject_uevent(&disk_to_dev(md->disk)->kobj, action);
else {
snprintf(udev_cookie, DM_COOKIE_LENGTH, "%s=%u",
DM_COOKIE_ENV_VAR_NAME, cookie);
- kobject_uevent_env(&disk_to_dev(md->disk)->kobj, action, envp);
+ return kobject_uevent_env(&disk_to_dev(md->disk)->kobj,
+ action, envp);
}
}
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -125,8 +125,8 @@ void dm_stripe_exit(void);
int dm_open_count(struct mapped_device *md);
int dm_lock_for_deletion(struct mapped_device *md);
-void dm_kobject_uevent(struct mapped_device *md, enum kobject_action action,
- unsigned cookie);
+int dm_kobject_uevent(struct mapped_device *md, enum kobject_action action,
+ unsigned cookie);
int dm_io_init(void);
void dm_io_exit(void);
--- a/include/linux/dm-ioctl.h
+++ b/include/linux/dm-ioctl.h
@@ -266,9 +266,9 @@ enum {
#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
#define DM_VERSION_MAJOR 4
-#define DM_VERSION_MINOR 16
+#define DM_VERSION_MINOR 17
#define DM_VERSION_PATCHLEVEL 0
-#define DM_VERSION_EXTRA "-ioctl (2009-11-05)"
+#define DM_VERSION_EXTRA "-ioctl (2010-03-05)"
/* Status bits */
#define DM_READONLY_FLAG (1 << 0) /* In/Out */
@@ -316,4 +316,9 @@ enum {
*/
#define DM_QUERY_INACTIVE_TABLE_FLAG (1 << 12) /* In */
+/*
+ * If set, a uevent was generated for which the caller may need to wait.
+ */
+#define DM_UEVENT_GENERATED_FLAG (1 << 13) /* Out */
+
#endif /* _LINUX_DM_IOCTL_H */
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Sridhar Samudrala <[email protected]>
(Cherry-picked from commit e80e2a60ff7914dae691345a976c80bbbff3ec74)
This patch increases the current hardcoded limit of NR_IOBUS_DEVS
from 6 to 200. We are hitting this limit when creating a guest with more
than 1 virtio-net device using vhost-net backend. Each virtio-net
device requires 2 such devices to service notifications from rx/tx queues.
Signed-off-by: Sridhar Samudrala <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/kvm_host.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -53,7 +53,7 @@ extern struct kmem_cache *kvm_vcpu_cache
*/
struct kvm_io_bus {
int dev_count;
-#define NR_IOBUS_DEVS 6
+#define NR_IOBUS_DEVS 200
struct kvm_io_device *devs[NR_IOBUS_DEVS];
};
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Xiao Guangrong <[email protected]>
(Cherry-picked from commit 77662e0028c7c63e34257fda03ff9625c59d939d)
This patch fix:
- calculate zapped page number properly in mmu_zap_unsync_children()
- calculate freeed page number properly kvm_mmu_change_mmu_pages()
- if zapped children page it shoud restart hlist walking
KVM-Stable-Tag.
Signed-off-by: Xiao Guangrong <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1502,8 +1502,8 @@ static int mmu_zap_unsync_children(struc
for_each_sp(pages, sp, parents, i) {
kvm_mmu_zap_page(kvm, sp);
mmu_pages_clear_parents(&parents);
+ zapped++;
}
- zapped += pages.nr;
kvm_mmu_pages_init(parent, &parents, &pages);
}
@@ -1554,14 +1554,16 @@ void kvm_mmu_change_mmu_pages(struct kvm
*/
if (used_pages > kvm_nr_mmu_pages) {
- while (used_pages > kvm_nr_mmu_pages) {
+ while (used_pages > kvm_nr_mmu_pages &&
+ !list_empty(&kvm->arch.active_mmu_pages)) {
struct kvm_mmu_page *page;
page = container_of(kvm->arch.active_mmu_pages.prev,
struct kvm_mmu_page, link);
- kvm_mmu_zap_page(kvm, page);
+ used_pages -= kvm_mmu_zap_page(kvm, page);
used_pages--;
}
+ kvm_nr_mmu_pages = used_pages;
kvm->arch.n_free_mmu_pages = 0;
}
else
@@ -1608,7 +1610,8 @@ static void mmu_unshadow(struct kvm *kvm
&& !sp->role.invalid) {
pgprintk("%s: zap %lx %x\n",
__func__, gfn, sp->role.word);
- kvm_mmu_zap_page(kvm, sp);
+ if (kvm_mmu_zap_page(kvm, sp))
+ nn = bucket->first;
}
}
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Tao Ma <[email protected]>
commit 78c37eb0d5e6a9727b12ea0f1821795ffaa66cfe upstream.
In ocfs2_validate_gd_parent, we check bg_chain against the
cl_next_free_rec of the dinode. Actually in resize, we have
the chance of bg_chain == cl_next_free_rec. So add some
additional condition check for it.
I also rename paramter "clean_error" to "resize", since the
old one is not clearly enough to indicate that we should only
meet with this case in resize.
btw, the correpsonding bug is
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1230.
Signed-off-by: Tao Ma <[email protected]>
Signed-off-by: Joel Becker <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/suballoc.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -152,7 +152,7 @@ static u32 ocfs2_bits_per_group(struct o
#define do_error(fmt, ...) \
do{ \
- if (clean_error) \
+ if (resize) \
mlog(ML_ERROR, fmt "\n", ##__VA_ARGS__); \
else \
ocfs2_error(sb, fmt, ##__VA_ARGS__); \
@@ -160,7 +160,7 @@ static u32 ocfs2_bits_per_group(struct o
static int ocfs2_validate_gd_self(struct super_block *sb,
struct buffer_head *bh,
- int clean_error)
+ int resize)
{
struct ocfs2_group_desc *gd = (struct ocfs2_group_desc *)bh->b_data;
@@ -211,7 +211,7 @@ static int ocfs2_validate_gd_self(struct
static int ocfs2_validate_gd_parent(struct super_block *sb,
struct ocfs2_dinode *di,
struct buffer_head *bh,
- int clean_error)
+ int resize)
{
unsigned int max_bits;
struct ocfs2_group_desc *gd = (struct ocfs2_group_desc *)bh->b_data;
@@ -233,8 +233,11 @@ static int ocfs2_validate_gd_parent(stru
return -EINVAL;
}
- if (le16_to_cpu(gd->bg_chain) >=
- le16_to_cpu(di->id2.i_chain.cl_next_free_rec)) {
+ /* In resize, we may meet the case bg_chain == cl_next_free_rec. */
+ if ((le16_to_cpu(gd->bg_chain) >
+ le16_to_cpu(di->id2.i_chain.cl_next_free_rec)) ||
+ ((le16_to_cpu(gd->bg_chain) ==
+ le16_to_cpu(di->id2.i_chain.cl_next_free_rec)) && !resize)) {
do_error("Group descriptor #%llu has bad chain %u",
(unsigned long long)bh->b_blocknr,
le16_to_cpu(gd->bg_chain));
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Takashi Iwai <[email protected]>
commit 8815cd030fdd73932a791d1f06194c8db807cde7 upstream.
The Biostar mobo seems to give a wrong DMA position, resulting in
stuttering or skipping sounds on 2.6.34. Since the commit
7b3a177b0d4f92b3431b8dca777313a07533a710, "ALSA: pcm_lib: fix "something
must be really wrong" condition", makes the position check more strictly,
the DMA position problem is revealed more clearly now.
The fix is to use only LPIB for obtaining the position, i.e. passing
position_fix=1. This patch adds a static quirk to achieve it as default.
Reported-by: Frank Griffin <[email protected]>
Cc: Eric Piel <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_intel.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2272,6 +2272,7 @@ static struct snd_pci_quirk position_fix
SND_PCI_QUIRK(0x1458, 0xa022, "ga-ma770-ud3", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1565, 0x820f, "Biostar Microtech", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1565, 0x8218, "Biostar Microtech", POS_FIX_LPIB),
SND_PCI_QUIRK(0x8086, 0xd601, "eMachines T5212", POS_FIX_LPIB),
{}
};
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jean Delvare <[email protected]>
commit c7a78d2c2e2537fd24903e966f34aae50319d587 upstream.
When CONFIG_REGULATOR isn't set, regulator_get_voltage() returns 0.
Properly handle this case by not trusting the value.
Reported-by: Jerome Oufella <[email protected]>
Signed-off-by: Jean Delvare <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Acked-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/sht15.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -541,7 +541,12 @@ static int __devinit sht15_probe(struct
/* If a regulator is available, query what the supply voltage actually is!*/
data->reg = regulator_get(data->dev, "vcc");
if (!IS_ERR(data->reg)) {
- data->supply_uV = regulator_get_voltage(data->reg);
+ int voltage;
+
+ voltage = regulator_get_voltage(data->reg);
+ if (voltage)
+ data->supply_uV = voltage;
+
regulator_enable(data->reg);
/* setup a notifier block to update this if another device
* causes the voltage to change */
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Joerg Roedel <[email protected]>
commit 8b408fe4f853dcfa18d133aa4cf1d7546b4c3870 upstream.
In the amd_iommu_domain_destroy the protection_domain_free
function is partly reimplemented. The 'partly' is the bug
here because the domain is not deleted from the domain list.
This results in use-after-free errors and data-corruption.
Fix it by just using protection_domain_free instead.
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/amd_iommu.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -2379,9 +2379,7 @@ static void amd_iommu_domain_destroy(str
free_pagetable(domain);
- domain_id_free(domain->id);
-
- kfree(domain);
+ protection_domain_free(domain);
dom->priv = NULL;
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Linus Torvalds <[email protected]>
commit 5d0b7235d83eefdafda300656e97d368afcafc9a upstream.
The fast version of the rwsems (the code that uses xadd) has
traditionally only worked on x86-32, and as a result it mixes different
kinds of types wildly - they just all happen to be 32-bit. We have
"long", we have "__s32", and we have "int".
To make it work on x86-64, the types suddenly matter a lot more. It can
be either a 32-bit or 64-bit signed type, and both work (with the caveat
that a 32-bit counter will only have 15 bits of effective write
counters, so it's limited to 32767 users). But whatever type you
choose, it needs to be used consistently.
This makes a new 'rwsem_counter_t', that is a 32-bit signed type. For a
64-bit type, you'd need to also update the BIAS values.
Signed-off-by: Linus Torvalds <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/rwsem.h | 25 +++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -55,6 +55,9 @@ extern asmregparm struct rw_semaphore *
/*
* the semaphore definition
+ *
+ * The bias values and the counter type needs to be extended to 64 bits
+ * if we want to have more than 32767 potential readers/writers
*/
#define RWSEM_UNLOCKED_VALUE 0x00000000
@@ -64,8 +67,10 @@ extern asmregparm struct rw_semaphore *
#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS
#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+typedef signed int rwsem_count_t;
+
struct rw_semaphore {
- signed long count;
+ rwsem_count_t count;
spinlock_t wait_lock;
struct list_head wait_list;
#ifdef CONFIG_DEBUG_LOCK_ALLOC
@@ -121,7 +126,7 @@ static inline void __down_read(struct rw
*/
static inline int __down_read_trylock(struct rw_semaphore *sem)
{
- __s32 result, tmp;
+ rwsem_count_t result, tmp;
asm volatile("# beginning __down_read_trylock\n\t"
" mov %0,%1\n\t"
"1:\n\t"
@@ -143,7 +148,7 @@ static inline int __down_read_trylock(st
*/
static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
{
- int tmp;
+ rwsem_count_t tmp;
tmp = RWSEM_ACTIVE_WRITE_BIAS;
asm volatile("# beginning down_write\n\t"
@@ -170,9 +175,9 @@ static inline void __down_write(struct r
*/
static inline int __down_write_trylock(struct rw_semaphore *sem)
{
- signed long ret = cmpxchg(&sem->count,
- RWSEM_UNLOCKED_VALUE,
- RWSEM_ACTIVE_WRITE_BIAS);
+ rwsem_count_t ret = cmpxchg(&sem->count,
+ RWSEM_UNLOCKED_VALUE,
+ RWSEM_ACTIVE_WRITE_BIAS);
if (ret == RWSEM_UNLOCKED_VALUE)
return 1;
return 0;
@@ -183,7 +188,7 @@ static inline int __down_write_trylock(s
*/
static inline void __up_read(struct rw_semaphore *sem)
{
- __s32 tmp = -RWSEM_ACTIVE_READ_BIAS;
+ rwsem_count_t tmp = -RWSEM_ACTIVE_READ_BIAS;
asm volatile("# beginning __up_read\n\t"
LOCK_PREFIX " xadd %1,(%2)\n\t"
/* subtracts 1, returns the old value */
@@ -201,7 +206,7 @@ static inline void __up_read(struct rw_s
*/
static inline void __up_write(struct rw_semaphore *sem)
{
- unsigned long tmp;
+ rwsem_count_t tmp;
asm volatile("# beginning __up_write\n\t"
LOCK_PREFIX " xadd %1,(%2)\n\t"
/* tries to transition
@@ -245,9 +250,9 @@ static inline void rwsem_atomic_add(int
/*
* implement exchange and add functionality
*/
-static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+static inline rwsem_count_t rwsem_atomic_update(int delta, struct rw_semaphore *sem)
{
- int tmp = delta;
+ rwsem_count_t tmp = delta;
asm volatile(LOCK_PREFIX "xadd %0,%1"
: "+r" (tmp), "+m" (sem->count)
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Chris Wright <[email protected]>
commit 04e856c072b84042bb56c487c2868638bb3f78db upstream.
After a guest is shutdown, assigned devices are not properly
returned to the pt domain. This can leave the device using
stale cached IOMMU data, and result in a non-functional
device after it's re-bound to the host driver. For example,
I see this upon rebinding:
AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x000000007e2a8000 flags=0x0050]
AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x000000007e2a8040 flags=0x0050]
AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x000000007e2a8080 flags=0x0050]
AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x000000007e2a80c0 flags=0x0050]
0000:02:00.0: eth2: Detected Hardware Unit Hang:
...
The amd_iommu_destroy_domain() function calls do_detach()
which doesn't reattach the pt domain to the device.
Use __detach_device() instead.
Signed-off-by: Chris Wright <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/amd_iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -2298,7 +2298,7 @@ static void cleanup_domain(struct protec
list_for_each_entry_safe(dev_data, next, &domain->dev_list, list) {
struct device *dev = dev_data->dev;
- do_detach(dev);
+ __detach_device(dev);
atomic_set(&dev_data->bind, 0);
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Mike Travis <[email protected]>
commit 95a8b6efc5d07103583f706c8a5889437d537939 upstream.
Update pci_set_vga_state to call arch dependent functions to enable Legacy
VGA I/O transactions to be redirected to correct target.
[[email protected]: make pci_register_set_vga_state() __init]
Signed-off-by: Mike Travis <[email protected]>
LKML-Reference: <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Robin Holt <[email protected]>
Cc: Jack Steiner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jesse Barnes <[email protected]>
Cc: David Airlie <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pci.c | 25 ++++++++++++++++++++++++-
include/linux/pci.h | 5 +++++
2 files changed, 29 insertions(+), 1 deletion(-)
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2612,6 +2612,23 @@ int pci_resource_bar(struct pci_dev *dev
return 0;
}
+/* Some architectures require additional programming to enable VGA */
+static arch_set_vga_state_t arch_set_vga_state;
+
+void __init pci_register_set_vga_state(arch_set_vga_state_t func)
+{
+ arch_set_vga_state = func; /* NULL disables */
+}
+
+static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode,
+ unsigned int command_bits, bool change_bridge)
+{
+ if (arch_set_vga_state)
+ return arch_set_vga_state(dev, decode, command_bits,
+ change_bridge);
+ return 0;
+}
+
/**
* pci_set_vga_state - set VGA decode state on device and parents if requested
* @dev: the PCI device
@@ -2625,9 +2642,15 @@ int pci_set_vga_state(struct pci_dev *de
struct pci_bus *bus;
struct pci_dev *bridge;
u16 cmd;
+ int rc;
WARN_ON(command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY));
+ /* ARCH specific VGA enables */
+ rc = pci_set_vga_state_arch(dev, decode, command_bits, change_bridge);
+ if (rc)
+ return rc;
+
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (decode == true)
cmd |= command_bits;
@@ -2842,6 +2865,7 @@ EXPORT_SYMBOL(pcim_pin_device);
EXPORT_SYMBOL(pci_disable_device);
EXPORT_SYMBOL(pci_find_capability);
EXPORT_SYMBOL(pci_bus_find_capability);
+EXPORT_SYMBOL(pci_register_set_vga_state);
EXPORT_SYMBOL(pci_release_regions);
EXPORT_SYMBOL(pci_request_regions);
EXPORT_SYMBOL(pci_request_regions_exclusive);
@@ -2874,4 +2898,3 @@ EXPORT_SYMBOL(pci_target_state);
EXPORT_SYMBOL(pci_prepare_to_sleep);
EXPORT_SYMBOL(pci_back_from_sleep);
EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state);
-
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -959,6 +959,11 @@ static inline int pci_proc_domain(struct
}
#endif /* CONFIG_PCI_DOMAINS */
+/* some architectures require additional setup to direct VGA traffic */
+typedef int (*arch_set_vga_state_t)(struct pci_dev *pdev, bool decode,
+ unsigned int command_bits, bool change_bridge);
+extern void pci_register_set_vga_state(arch_set_vga_state_t func);
+
#else /* CONFIG_PCI is not enabled */
/*
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Wey-Yi Guy <[email protected]>
commit dff010ac8e57e43669518a14c0e945dfeb80c2a7 upstream.
Reset and clear all the tx queues when finished downloading runtime
uCode and ready to go into operation mode.
Signed-off-by: Wey-Yi Guy <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-4965.c | 2 ++
drivers/net/wireless/iwlwifi/iwl-5000.c | 2 ++
2 files changed, 4 insertions(+)
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -581,6 +581,8 @@ static int iwl4965_alive_notify(struct i
iwl4965_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);
+ /* reset to 0 to enable all the queue first */
+ priv->txq_ctx_active_msk = 0;
/* Map each Tx/cmd queue to its corresponding fifo */
for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
int ac = default_queue_to_tx_fifo[i];
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -657,6 +657,8 @@ int iwl5000_alive_notify(struct iwl_priv
iwl5000_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);
+ /* reset to 0 to enable all the queue first */
+ priv->txq_ctx_active_msk = 0;
/* map qos queues to fifos one-to-one */
for (i = 0; i < ARRAY_SIZE(iwl5000_default_queue_to_tx_fifo); i++) {
int ac = iwl5000_default_queue_to_tx_fifo[i];
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Borislav Petkov <[email protected]>
commit 897de50e08937663912c86fb12ad7f708af2386c upstream.
The cache_disable_[01] attribute in
/sys/devices/system/cpu/cpu?/cache/index[0-3]/
is enabled on all cache levels although only L3 supports it. Add it only
to the cache level that actually supports it.
Signed-off-by: Borislav Petkov <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/intel_cacheinfo.c | 35 +++++++++++++++++++++++++---------
1 file changed, 26 insertions(+), 9 deletions(-)
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -814,16 +814,24 @@ static struct _cache_attr cache_disable_
static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644,
show_cache_disable_1, store_cache_disable_1);
+#define DEFAULT_SYSFS_CACHE_ATTRS \
+ &type.attr, \
+ &level.attr, \
+ &coherency_line_size.attr, \
+ &physical_line_partition.attr, \
+ &ways_of_associativity.attr, \
+ &number_of_sets.attr, \
+ &size.attr, \
+ &shared_cpu_map.attr, \
+ &shared_cpu_list.attr
+
static struct attribute *default_attrs[] = {
- &type.attr,
- &level.attr,
- &coherency_line_size.attr,
- &physical_line_partition.attr,
- &ways_of_associativity.attr,
- &number_of_sets.attr,
- &size.attr,
- &shared_cpu_map.attr,
- &shared_cpu_list.attr,
+ DEFAULT_SYSFS_CACHE_ATTRS,
+ NULL
+};
+
+static struct attribute *default_l3_attrs[] = {
+ DEFAULT_SYSFS_CACHE_ATTRS,
&cache_disable_0.attr,
&cache_disable_1.attr,
NULL
@@ -916,6 +924,7 @@ static int __cpuinit cache_add_dev(struc
unsigned int cpu = sys_dev->id;
unsigned long i, j;
struct _index_kobject *this_object;
+ struct _cpuid4_info *this_leaf;
int retval;
retval = cpuid4_cache_sysfs_init(cpu);
@@ -934,6 +943,14 @@ static int __cpuinit cache_add_dev(struc
this_object = INDEX_KOBJECT_PTR(cpu, i);
this_object->cpu = cpu;
this_object->index = i;
+
+ this_leaf = CPUID4_INFO_IDX(cpu, i);
+
+ if (this_leaf->can_disable)
+ ktype_cache.default_attrs = default_l3_attrs;
+ else
+ ktype_cache.default_attrs = default_attrs;
+
retval = kobject_init_and_add(&(this_object->kobj),
&ktype_cache,
per_cpu(ici_cache_kobject, cpu),
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Christoph Hellwig <[email protected]>
commit f1f724e4b523d444c5a598d74505aefa3d6844d2 upstream.
The radix-tree code requires it's users to serialize tag updates
against other updates to the tree. While XFS protects tag updates
against each other it does not serialize them against updates of the
tree contents, which can lead to tag corruption. Fix the inode
cache to always take pag_ici_lock in exclusive mode when updating
radix tree tags.
Signed-off-by: Christoph Hellwig <[email protected]>
Reported-by: Patrick Schreurs <[email protected]>
Tested-by: Patrick Schreurs <[email protected]>
Signed-off-by: Alex Elder <[email protected]>
Cc: Dave Chinner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/xfs/linux-2.6/xfs_sync.c | 4 ++--
fs/xfs/xfs_iget.c | 19 +++++++++++++------
2 files changed, 15 insertions(+), 8 deletions(-)
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -693,12 +693,12 @@ xfs_inode_set_reclaim_tag(
xfs_mount_t *mp = ip->i_mount;
xfs_perag_t *pag = xfs_get_perag(mp, ip->i_ino);
- read_lock(&pag->pag_ici_lock);
+ write_lock(&pag->pag_ici_lock);
spin_lock(&ip->i_flags_lock);
__xfs_inode_set_reclaim_tag(pag, ip);
__xfs_iflags_set(ip, XFS_IRECLAIMABLE);
spin_unlock(&ip->i_flags_lock);
- read_unlock(&pag->pag_ici_lock);
+ write_unlock(&pag->pag_ici_lock);
xfs_put_perag(mp, pag);
}
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -190,13 +190,12 @@ xfs_iget_cache_hit(
trace_xfs_iget_reclaim(ip);
/*
- * We need to set XFS_INEW atomically with clearing the
- * reclaimable tag so that we do have an indicator of the
- * inode still being initialized.
+ * We need to set XFS_IRECLAIM to prevent xfs_reclaim_inode
+ * from stomping over us while we recycle the inode. We can't
+ * clear the radix tree reclaimable tag yet as it requires
+ * pag_ici_lock to be held exclusive.
*/
- ip->i_flags |= XFS_INEW;
- ip->i_flags &= ~XFS_IRECLAIMABLE;
- __xfs_inode_clear_reclaim_tag(mp, pag, ip);
+ ip->i_flags |= XFS_IRECLAIM;
spin_unlock(&ip->i_flags_lock);
read_unlock(&pag->pag_ici_lock);
@@ -216,7 +215,15 @@ xfs_iget_cache_hit(
trace_xfs_iget_reclaim(ip);
goto out_error;
}
+
+ write_lock(&pag->pag_ici_lock);
+ spin_lock(&ip->i_flags_lock);
+ ip->i_flags &= ~(XFS_IRECLAIMABLE | XFS_IRECLAIM);
+ ip->i_flags |= XFS_INEW;
+ __xfs_inode_clear_reclaim_tag(mp, pag, ip);
inode->i_state = I_NEW;
+ spin_unlock(&ip->i_flags_lock);
+ write_unlock(&pag->pag_ici_lock);
} else {
/* If the VFS inode is being torn down, pause and try again. */
if (!igrab(inode)) {
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Linus Torvalds <[email protected]>
commit bafaecd11df15ad5b1e598adc7736afcd38ee13d upstream.
This one is much faster than the spinlock based fallback rwsem code,
with certain artifical benchmarks having shown 300%+ improvement on
threaded page faults etc.
Again, note the 32767-thread limit here. So this really does need that
whole "make rwsem_count_t be 64-bit and fix the BIAS values to match"
extension on top of it, but that is conceptually a totally independent
issue.
NOT TESTED! The original patch that this all was based on were tested by
KAMEZAWA Hiroyuki, but maybe I screwed up something when I created the
cleaned-up series, so caveat emptor..
Also note that it _may_ be a good idea to mark some more registers
clobbered on x86-64 in the inline asms instead of saving/restoring them.
They are inline functions, but they are only used in places where there
are not a lot of live registers _anyway_, so doing for example the
clobbers of %r8-%r11 in the asm wouldn't make the fast-path code any
worse, and would make the slow-path code smaller.
(Not that the slow-path really matters to that degree. Saving a few
unnecessary registers is the _least_ of our problems when we hit the slow
path. The instruction/cycle counting really only matters in the fast
path).
Signed-off-by: Linus Torvalds <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/Kconfig.cpu | 2 -
arch/x86/lib/Makefile | 1
arch/x86/lib/rwsem_64.S | 81 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 83 insertions(+), 1 deletion(-)
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -319,7 +319,7 @@ config X86_L1_CACHE_SHIFT
config X86_XADD
def_bool y
- depends on X86_32 && !M386
+ depends on X86_64 || !M386
config X86_PPRO_FENCE
bool "PentiumPro memory ordering errata workaround"
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -39,4 +39,5 @@ else
lib-y += thunk_64.o clear_page_64.o copy_page_64.o
lib-y += memmove_64.o memset_64.o
lib-y += copy_user_64.o rwlock_64.o copy_user_nocache_64.o
+ lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem_64.o
endif
--- /dev/null
+++ b/arch/x86/lib/rwsem_64.S
@@ -0,0 +1,81 @@
+/*
+ * x86-64 rwsem wrappers
+ *
+ * This interfaces the inline asm code to the slow-path
+ * C routines. We need to save the call-clobbered regs
+ * that the asm does not mark as clobbered, and move the
+ * argument from %rax to %rdi.
+ *
+ * NOTE! We don't need to save %rax, because the functions
+ * will always return the semaphore pointer in %rax (which
+ * is also the input argument to these helpers)
+ *
+ * The following can clobber %rdx because the asm clobbers it:
+ * call_rwsem_down_write_failed
+ * call_rwsem_wake
+ * but %rdi, %rsi, %rcx, %r8-r11 always need saving.
+ */
+
+#include <linux/linkage.h>
+#include <asm/rwlock.h>
+#include <asm/alternative-asm.h>
+#include <asm/frame.h>
+#include <asm/dwarf2.h>
+
+#define save_common_regs \
+ pushq %rdi; \
+ pushq %rsi; \
+ pushq %rcx; \
+ pushq %r8; \
+ pushq %r9; \
+ pushq %r10; \
+ pushq %r11
+
+#define restore_common_regs \
+ popq %r11; \
+ popq %r10; \
+ popq %r9; \
+ popq %r8; \
+ popq %rcx; \
+ popq %rsi; \
+ popq %rdi
+
+/* Fix up special calling conventions */
+ENTRY(call_rwsem_down_read_failed)
+ save_common_regs
+ pushq %rdx
+ movq %rax,%rdi
+ call rwsem_down_read_failed
+ popq %rdx
+ restore_common_regs
+ ret
+ ENDPROC(call_rwsem_down_read_failed)
+
+ENTRY(call_rwsem_down_write_failed)
+ save_common_regs
+ movq %rax,%rdi
+ call rwsem_down_write_failed
+ restore_common_regs
+ ret
+ ENDPROC(call_rwsem_down_write_failed)
+
+ENTRY(call_rwsem_wake)
+ decw %dx /* do nothing if still outstanding active readers */
+ jnz 1f
+ save_common_regs
+ movq %rax,%rdi
+ call rwsem_wake
+ restore_common_regs
+1: ret
+ ENDPROC(call_rwsem_wake)
+
+/* Fix up special calling conventions */
+ENTRY(call_rwsem_downgrade_wake)
+ save_common_regs
+ pushq %rdx
+ movq %rax,%rdi
+ call rwsem_downgrade_wake
+ popq %rdx
+ restore_common_regs
+ ret
+ ENDPROC(call_rwsem_downgrade_wake)
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Seth Heasley <[email protected]>
commit 393764340beb595c1ad7dd2d2243c2b6551aaa71 upstream.
Add the Intel Cougar Point (PCH) SMBus controller device IDs.
Signed-off-by: Seth Heasley <[email protected]>
Signed-off-by: Jean Delvare <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/i2c/busses/i2c-i801 | 3 ++-
drivers/i2c/busses/Kconfig | 5 +++--
drivers/i2c/busses/i2c-i801.c | 5 ++++-
3 files changed, 9 insertions(+), 4 deletions(-)
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -15,7 +15,8 @@ Supported adapters:
* Intel 82801I (ICH9)
* Intel EP80579 (Tolapai)
* Intel 82801JI (ICH10)
- * Intel PCH
+ * Intel 3400/5 Series (PCH)
+ * Intel Cougar Point (PCH)
Datasheets: Publicly available at the Intel website
Authors:
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -77,7 +77,7 @@ config I2C_AMD8111
will be called i2c-amd8111.
config I2C_I801
- tristate "Intel 82801 (ICH)"
+ tristate "Intel 82801 (ICH/PCH)"
depends on PCI
help
If you say yes to this option, support will be included for the Intel
@@ -97,7 +97,8 @@ config I2C_I801
ICH9
Tolapai
ICH10
- PCH
+ 3400/5 Series (PCH)
+ Cougar Point (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -41,7 +41,8 @@
Tolapai 0x5032 32 hard yes yes yes
ICH10 0x3a30 32 hard yes yes yes
ICH10 0x3a60 32 hard yes yes yes
- PCH 0x3b30 32 hard yes yes yes
+ 3400/5 Series (PCH) 0x3b30 32 hard yes yes yes
+ Cougar Point (PCH) 0x1c22 32 hard yes yes yes
Features supported by this driver:
Software PEC no
@@ -580,6 +581,7 @@ static struct pci_device_id i801_ids[] =
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CPT_SMBUS) },
{ 0, }
};
@@ -709,6 +711,7 @@ static int __devinit i801_probe(struct p
case PCI_DEVICE_ID_INTEL_ICH10_4:
case PCI_DEVICE_ID_INTEL_ICH10_5:
case PCI_DEVICE_ID_INTEL_PCH_SMBUS:
+ case PCI_DEVICE_ID_INTEL_CPT_SMBUS:
i801_features |= FEATURE_I2C_BLOCK_READ;
/* fall through */
case PCI_DEVICE_ID_INTEL_82801DB_3:
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Chris Wright <[email protected]>
commit 8f9f55e83e939724490d7cde3833c4883c6d1310 upstream.
This effectively reverts commit 61d047be99757fd9b0af900d7abce9a13a337488.
Disabling the IOMMU can potetially allow DMA transactions to
complete without being translated. Leave it enabled, and allow
crash kernel to do the IOMMU reinitialization properly.
Cc: Joerg Roedel <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Neil Horman <[email protected]>
Cc: Vivek Goyal <[email protected]>
Signed-off-by: Chris Wright <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/crash.c | 6 ------
1 file changed, 6 deletions(-)
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -27,7 +27,6 @@
#include <asm/cpu.h>
#include <asm/reboot.h>
#include <asm/virtext.h>
-#include <asm/x86_init.h>
#if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
@@ -103,10 +102,5 @@ void native_machine_crash_shutdown(struc
#ifdef CONFIG_HPET_TIMER
hpet_disable();
#endif
-
-#ifdef CONFIG_X86_64
- x86_platform.iommu_shutdown();
-#endif
-
crash_save_cpu(regs, safe_smp_processor_id());
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: KOSAKI Motohiro <[email protected]>
commit cd3d8031eb4311e516329aee03c79a08333141f1 upstream.
[ Note, this commit changes the syscall ABI for > 1024 CPUs systems. ]
Recently, some distro decided to use NR_CPUS=4096 for mysterious reasons.
Unfortunately, glibc sched interface has the following definition:
# define __CPU_SETSIZE 1024
# define __NCPUBITS (8 * sizeof (__cpu_mask))
typedef unsigned long int __cpu_mask;
typedef struct
{
__cpu_mask __bits[__CPU_SETSIZE / __NCPUBITS];
} cpu_set_t;
It mean, if NR_CPUS is bigger than 1024, cpu_set_t makes an
ABI issue ...
More recently, Sharyathi Nagesh reported following test program makes
misterious syscall failure:
-----------------------------------------------------------------------
#define _GNU_SOURCE
#include<stdio.h>
#include<errno.h>
#include<sched.h>
int main()
{
cpu_set_t set;
if (sched_getaffinity(0, sizeof(cpu_set_t), &set) < 0)
printf("\n Call is failing with:%d", errno);
}
-----------------------------------------------------------------------
Because the kernel assumes len argument of sched_getaffinity() is bigger
than NR_CPUS. But now it is not correct.
Now we are faced with the following annoying dilemma, due to
the limitations of the glibc interface built in years ago:
(1) if we change glibc's __CPU_SETSIZE definition, we lost
binary compatibility of _all_ application.
(2) if we don't change it, we also lost binary compatibility of
Sharyathi's use case.
Then, I would propse to change the rule of the len argument of
sched_getaffinity().
Old:
len should be bigger than NR_CPUS
New:
len should be bigger than maximum possible cpu id
This creates the following behavior:
(A) In the real 4096 cpus machine, the above test program still
return -EINVAL.
(B) NR_CPUS=4096 but the machine have less than 1024 cpus (almost
all machines in the world), the above can run successfully.
Fortunatelly, BIG SGI machine is mainly used for HPC use case. It means
they can rebuild their programs.
IOW we hope they are not annoyed by this issue ...
Reported-by: Sharyathi Nagesh <[email protected]>
Signed-off-by: KOSAKI Motohiro <[email protected]>
Acked-by: Ulrich Drepper <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Jack Steiner <[email protected]>
Cc: Russ Anderson <[email protected]>
Cc: Mike Travis <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -6717,7 +6717,9 @@ SYSCALL_DEFINE3(sched_getaffinity, pid_t
int ret;
cpumask_var_t mask;
- if (len < cpumask_size())
+ if (len < nr_cpu_ids)
+ return -EINVAL;
+ if (len & (sizeof(unsigned long)-1))
return -EINVAL;
if (!alloc_cpumask_var(&mask, GFP_KERNEL))
@@ -6725,10 +6727,12 @@ SYSCALL_DEFINE3(sched_getaffinity, pid_t
ret = sched_getaffinity(pid, mask);
if (ret == 0) {
- if (copy_to_user(user_mask_ptr, mask, cpumask_size()))
+ int retlen = min(len, cpumask_size());
+
+ if (copy_to_user(user_mask_ptr, mask, retlen))
ret = -EFAULT;
else
- ret = cpumask_size();
+ ret = retlen;
}
free_cpumask_var(mask);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: H. Peter Anvin <[email protected]>
commit 1838ef1d782f7527e6defe87e180598622d2d071 upstream.
For x86-64, 32767 threads really is not enough. Change rwsem_count_t
to a signed long, so that it is 64 bits on x86-64.
This required the following changes to the assembly code:
a) %z0 doesn't work on all versions of gcc! At least gcc 4.4.2 as
shipped with Fedora 12 emits "ll" not "q" for 64 bits, even for
integer operands. Newer gccs apparently do this correctly, but
avoid this problem by using the _ASM_ macros instead of %z.
b) 64 bits immediates are only allowed in "movq $imm,%reg"
constructs... no others. Change some of the constraints to "e",
and fix the one case where we would have had to use an invalid
immediate -- in that case, we only care about the upper half
anyway, so just access the upper half.
Signed-off-by: H. Peter Anvin <[email protected]>
Cc: Linus Torvalds <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/rwsem.h | 53 ++++++++++++++++++++++++++++++++-----------
1 file changed, 40 insertions(+), 13 deletions(-)
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -41,6 +41,7 @@
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/lockdep.h>
+#include <asm/asm.h>
struct rwsem_waiter;
@@ -56,18 +57,24 @@ extern asmregparm struct rw_semaphore *
/*
* the semaphore definition
*
- * The bias values and the counter type needs to be extended to 64 bits
- * if we want to have more than 32767 potential readers/writers
+ * The bias values and the counter type limits the number of
+ * potential readers/writers to 32767 for 32 bits and 2147483647
+ * for 64 bits.
*/
-#define RWSEM_UNLOCKED_VALUE 0x00000000
-#define RWSEM_ACTIVE_BIAS 0x00000001
-#define RWSEM_ACTIVE_MASK 0x0000ffff
-#define RWSEM_WAITING_BIAS (-0x00010000)
+#ifdef CONFIG_X86_64
+# define RWSEM_ACTIVE_MASK 0xffffffffL
+#else
+# define RWSEM_ACTIVE_MASK 0x0000ffffL
+#endif
+
+#define RWSEM_UNLOCKED_VALUE 0x00000000L
+#define RWSEM_ACTIVE_BIAS 0x00000001L
+#define RWSEM_WAITING_BIAS (-RWSEM_ACTIVE_MASK-1)
#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS
#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-typedef signed int rwsem_count_t;
+typedef signed long rwsem_count_t;
struct rw_semaphore {
rwsem_count_t count;
@@ -110,7 +117,7 @@ do { \
static inline void __down_read(struct rw_semaphore *sem)
{
asm volatile("# beginning down_read\n\t"
- LOCK_PREFIX " inc%z0 (%1)\n\t"
+ LOCK_PREFIX _ASM_INC "(%1)\n\t"
/* adds 0x00000001, returns the old value */
" jns 1f\n"
" call call_rwsem_down_read_failed\n"
@@ -225,8 +232,25 @@ static inline void __up_write(struct rw_
*/
static inline void __downgrade_write(struct rw_semaphore *sem)
{
+#ifdef CONFIG_X86_64
+# if RWSEM_WAITING_BIAS != -0x100000000
+# error "This code assumes RWSEM_WAITING_BIAS == -2^32"
+# endif
+
+ /* 64-bit immediates are special and expensive, and not needed here */
+ asm volatile("# beginning __downgrade_write\n\t"
+ LOCK_PREFIX "incl 4(%1)\n\t"
+ /* transitions 0xZZZZZZZZ00000001 -> 0xYYYYYYYY00000001 */
+ " jns 1f\n\t"
+ " call call_rwsem_downgrade_wake\n"
+ "1:\n\t"
+ "# ending __downgrade_write\n"
+ : "+m" (sem->count)
+ : "a" (sem)
+ : "memory", "cc");
+#else
asm volatile("# beginning __downgrade_write\n\t"
- LOCK_PREFIX " add%z0 %2,(%1)\n\t"
+ LOCK_PREFIX _ASM_ADD "%2,(%1)\n\t"
/* transitions 0xZZZZ0001 -> 0xYYYY0001 */
" jns 1f\n\t"
" call call_rwsem_downgrade_wake\n"
@@ -235,22 +259,25 @@ static inline void __downgrade_write(str
: "+m" (sem->count)
: "a" (sem), "i" (-RWSEM_WAITING_BIAS)
: "memory", "cc");
+#endif
}
/*
* implement atomic add functionality
*/
-static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+static inline void rwsem_atomic_add(rwsem_count_t delta,
+ struct rw_semaphore *sem)
{
- asm volatile(LOCK_PREFIX "add%z0 %1,%0"
+ asm volatile(LOCK_PREFIX _ASM_ADD "%1,%0"
: "+m" (sem->count)
- : "ir" (delta));
+ : "er" (delta));
}
/*
* implement exchange and add functionality
*/
-static inline rwsem_count_t rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+static inline rwsem_count_t rwsem_atomic_update(rwsem_count_t delta,
+ struct rw_semaphore *sem)
{
rwsem_count_t tmp = delta;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jerome Glisse <[email protected]>
commit 30f69f3fb20bd719b5e1bf879339914063d38f47 upstream.
Typo in in flush leaded to no flush of the RS600 tlb which
ultimately leaded to massive system ram corruption, with
this patch everythings seems to work properly.
Signed-off-by: Jerome Glisse <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/rs600.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -175,7 +175,7 @@ void rs600_gart_tlb_flush(struct radeon_
WREG32_MC(R_000100_MC_PT0_CNTL, tmp);
tmp = RREG32_MC(R_000100_MC_PT0_CNTL);
- tmp |= S_000100_INVALIDATE_ALL_L1_TLBS(1) & S_000100_INVALIDATE_L2_CACHE(1);
+ tmp |= S_000100_INVALIDATE_ALL_L1_TLBS(1) | S_000100_INVALIDATE_L2_CACHE(1);
WREG32_MC(R_000100_MC_PT0_CNTL, tmp);
tmp = RREG32_MC(R_000100_MC_PT0_CNTL);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Alex Deucher <[email protected]>
commit d3a67a43b0460bae3e2ac14092497833344ac10d upstream.
Switching between TV and VGA caused VGA to break on some systems
since the TV encoder was left enabled when VGA was used.
fixes fdo bug 25520.
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_encoders.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1276,8 +1276,12 @@ radeon_atom_encoder_mode_set(struct drm_
case ENCODER_OBJECT_ID_INTERNAL_DAC2:
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
atombios_dac_setup(encoder, ATOM_ENABLE);
- if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT))
- atombios_tv_setup(encoder, ATOM_ENABLE);
+ if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT)) {
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT))
+ atombios_tv_setup(encoder, ATOM_ENABLE);
+ else
+ atombios_tv_setup(encoder, ATOM_DISABLE);
+ }
break;
}
atombios_apply_encoder_quirks(encoder, adjusted_mode);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Alex Deucher <[email protected]>
commit 65384a1d41c4e91f0b49d90d11b7f424d6e5c58e upstream.
shr/shl ops need the full dst rather than the pre-masked
version. Fixes fdo bug 27478 and kernel bug 15738.
v2: remove some unsed vars, add comments
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/atom.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/gpu/drm/radeon/atom.c
+++ b/drivers/gpu/drm/radeon/atom.c
@@ -881,11 +881,16 @@ static void atom_op_shl(atom_exec_contex
uint8_t attr = U8((*ptr)++), shift;
uint32_t saved, dst;
int dptr = *ptr;
+ uint32_t dst_align = atom_dst_to_src[(attr >> 3) & 7][(attr >> 6) & 3];
SDEBUG(" dst: ");
dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+ /* op needs to full dst value */
+ dst = saved;
shift = atom_get_src(ctx, attr, ptr);
SDEBUG(" shift: %d\n", shift);
dst <<= shift;
+ dst &= atom_arg_mask[dst_align];
+ dst >>= atom_arg_shift[dst_align];
SDEBUG(" dst: ");
atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
}
@@ -895,11 +900,16 @@ static void atom_op_shr(atom_exec_contex
uint8_t attr = U8((*ptr)++), shift;
uint32_t saved, dst;
int dptr = *ptr;
+ uint32_t dst_align = atom_dst_to_src[(attr >> 3) & 7][(attr >> 6) & 3];
SDEBUG(" dst: ");
dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+ /* op needs to full dst value */
+ dst = saved;
shift = atom_get_src(ctx, attr, ptr);
SDEBUG(" shift: %d\n", shift);
dst >>= shift;
+ dst &= atom_arg_mask[dst_align];
+ dst >>= atom_arg_shift[dst_align];
SDEBUG(" dst: ");
atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Oliver Neukum <[email protected]>
commit f0730924e9e32bb8935c60040a26d94179355088 upstream.
Stupid logic bug passing a just nulled pointer
Signed-off-by: Oliver Neukum <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-acm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1441,7 +1441,7 @@ static int acm_resume(struct usb_interfa
wb = acm->delayed_wb;
acm->delayed_wb = NULL;
spin_unlock_irq(&acm->write_lock);
- acm_start_wb(acm, acm->delayed_wb);
+ acm_start_wb(acm, wb);
} else {
spin_unlock_irq(&acm->write_lock);
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Eric Sandeen <[email protected]>
commit a1de02dccf906faba2ee2d99cac56799bda3b96a upstream.
The "offset" member in ext4_io_end holds bytes, not blocks, so
ext4_lblk_t is wrong - and too small (u32).
This caused the async i/o writes to sparse files beyond 4GB to fail
when they wrapped around to 0.
Also fix up the type of arguments to ext4_convert_unwritten_extents(),
it gets ssize_t from ext4_end_aio_dio_nolock() and
ext4_ext_direct_IO().
Reported-by: Giel de Nijs <[email protected]>
Signed-off-by: Eric Sandeen <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/ext4.h | 6 +++---
fs/ext4/extents.c | 2 +-
fs/ext4/inode.c | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -139,8 +139,8 @@ typedef struct ext4_io_end {
struct inode *inode; /* file being written to */
unsigned int flag; /* unwritten or not */
int error; /* I/O error code */
- ext4_lblk_t offset; /* offset in the file */
- size_t size; /* size of the extent */
+ loff_t offset; /* offset in the file */
+ ssize_t size; /* size of the extent */
struct work_struct work; /* data work queue */
} ext4_io_end_t;
@@ -1744,7 +1744,7 @@ extern void ext4_ext_release(struct supe
extern long ext4_fallocate(struct inode *inode, int mode, loff_t offset,
loff_t len);
extern int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset,
- loff_t len);
+ ssize_t len);
extern int ext4_get_blocks(handle_t *handle, struct inode *inode,
sector_t block, unsigned int max_blocks,
struct buffer_head *bh, int flags);
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -3603,7 +3603,7 @@ retry:
* Returns 0 on success.
*/
int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset,
- loff_t len)
+ ssize_t len)
{
handle_t *handle;
ext4_lblk_t block;
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3551,7 +3551,7 @@ static int ext4_end_aio_dio_nolock(ext4_
{
struct inode *inode = io->inode;
loff_t offset = io->offset;
- size_t size = io->size;
+ ssize_t size = io->size;
int ret = 0;
ext4_debug("end_aio_dio_onlock: io 0x%p from inode %lu,list->next 0x%p,"
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Borislav Petkov <[email protected]>
commit 48a719c238bcbb72d6da79de9c5b3b93ab472107 upstream.
Simplify if-statement while at it.
[ hpa: we need to #include <asm/smp.h> ]
Cc: Dave Jones <[email protected]>
Cc: David Airlie <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/agp/intel-agp.c | 15 ++++-----------
1 file changed, 4 insertions(+), 11 deletions(-)
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -8,6 +8,7 @@
#include <linux/kernel.h>
#include <linux/pagemap.h>
#include <linux/agp_backend.h>
+#include <asm/smp.h>
#include "agp.h"
/*
@@ -815,12 +816,6 @@ static void intel_i830_setup_flush(void)
intel_i830_fini_flush();
}
-static void
-do_wbinvd(void *null)
-{
- wbinvd();
-}
-
/* The chipset_flush interface needs to get data that has already been
* flushed out of the CPU all the way out to main memory, because the GPU
* doesn't snoop those buffers.
@@ -837,12 +832,10 @@ static void intel_i830_chipset_flush(str
memset(pg, 0, 1024);
- if (cpu_has_clflush) {
+ if (cpu_has_clflush)
clflush_cache_range(pg, 1024);
- } else {
- if (on_each_cpu(do_wbinvd, NULL, 1) != 0)
- printk(KERN_ERR "Timed out waiting for cache flush.\n");
- }
+ else if (wbinvd_on_all_cpus() != 0)
+ printk(KERN_ERR "Timed out waiting for cache flush.\n");
}
/* The intel i830 automatically initializes the agp aperture during POST.
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Takashi Iwai <[email protected]>
commit 29aac005ff4dc8a5f50b80f4e5c4f59b21c0fb50 upstream.
usb-midi causes sometimes Oops at snd_usbmidi_output_drain() after
disconnection. This is due to the access to the endpoints which have
been already released at disconnection while the files are still alive.
This patch fixes the problem by checking disconnection state at
snd_usbmidi_output_drain() and by releasing urbs but keeping the
endpoint instances until really all freed.
Tested-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/usbmidi.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -984,6 +984,8 @@ static void snd_usbmidi_output_drain(str
DEFINE_WAIT(wait);
long timeout = msecs_to_jiffies(50);
+ if (ep->umidi->disconnected)
+ return;
/*
* The substream buffer is empty, but some data might still be in the
* currently active URBs, so we have to wait for those to complete.
@@ -1121,14 +1123,21 @@ static int snd_usbmidi_in_endpoint_creat
* Frees an output endpoint.
* May be called when ep hasn't been initialized completely.
*/
-static void snd_usbmidi_out_endpoint_delete(struct snd_usb_midi_out_endpoint* ep)
+static void snd_usbmidi_out_endpoint_clear(struct snd_usb_midi_out_endpoint *ep)
{
unsigned int i;
for (i = 0; i < OUTPUT_URBS; ++i)
- if (ep->urbs[i].urb)
+ if (ep->urbs[i].urb) {
free_urb_and_buffer(ep->umidi, ep->urbs[i].urb,
ep->max_transfer);
+ ep->urbs[i].urb = NULL;
+ }
+}
+
+static void snd_usbmidi_out_endpoint_delete(struct snd_usb_midi_out_endpoint *ep)
+{
+ snd_usbmidi_out_endpoint_clear(ep);
kfree(ep);
}
@@ -1260,15 +1269,18 @@ void snd_usbmidi_disconnect(struct list_
usb_kill_urb(ep->out->urbs[j].urb);
if (umidi->usb_protocol_ops->finish_out_endpoint)
umidi->usb_protocol_ops->finish_out_endpoint(ep->out);
+ ep->out->active_urbs = 0;
+ if (ep->out->drain_urbs) {
+ ep->out->drain_urbs = 0;
+ wake_up(&ep->out->drain_wait);
+ }
}
if (ep->in)
for (j = 0; j < INPUT_URBS; ++j)
usb_kill_urb(ep->in->urbs[j]);
/* free endpoints here; later call can result in Oops */
- if (ep->out) {
- snd_usbmidi_out_endpoint_delete(ep->out);
- ep->out = NULL;
- }
+ if (ep->out)
+ snd_usbmidi_out_endpoint_clear(ep->out);
if (ep->in) {
snd_usbmidi_in_endpoint_delete(ep->in);
ep->in = NULL;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Joerg Schirottke <[email protected]>
commit d1501ea844eefdf925f6b711875b4b2b928fddf8 upstream.
Added the matching model for Clevo laptop M570U.
Signed-off-by: Joerg Schirottke <[email protected]>
Tested-by: Maximilian Gerhard <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9074,6 +9074,7 @@ static struct snd_pci_quirk alc882_cfg_t
SND_PCI_QUIRK(0x1462, 0xaa08, "MSI", ALC883_TARGA_2ch_DIG),
SND_PCI_QUIRK(0x147b, 0x1083, "Abit IP35-PRO", ALC883_6ST_DIG),
+ SND_PCI_QUIRK(0x1558, 0x0571, "Clevo laptop M570U", ALC883_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1558, 0x0721, "Clevo laptop M720R", ALC883_CLEVO_M720),
SND_PCI_QUIRK(0x1558, 0x0722, "Clevo laptop M720SR", ALC883_CLEVO_M720),
SND_PCI_QUIRK(0x1558, 0x5409, "Clevo laptop M540R", ALC883_CLEVO_M540R),
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Yong Wang <[email protected]>
commit 88fcf710c13bd41f2b98c5411e4f21ab98da4fb4 upstream.
'map' is allocated in sparse_keymap_setup() and it it the one that should
be freed on error instead of 'keymap'.
Signed-off-by: Yong Wang <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/sparse-keymap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/input/sparse-keymap.c
+++ b/drivers/input/sparse-keymap.c
@@ -161,7 +161,7 @@ int sparse_keymap_setup(struct input_dev
return 0;
err_out:
- kfree(keymap);
+ kfree(map);
return error;
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jerome Oufella <[email protected]>
commit 328a2c22abd08911e37fa66f1358f829cecd72e9 upstream.
I discovered two issues.
First the previous sht15_calc_temp() loop did not iterate through the
temppoints array since the (data->supply_uV > temppoints[i - 1].vdd)
test is always true in this direction.
Also the two-points linear interpolation function was returning biased
values due to a stray division by 1000 which shouldn't be there.
[JD: Also change the default value for d1 from 0 to something saner.]
Signed-off-by: Jerome Oufella <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Signed-off-by: Jean Delvare <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/sht15.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -302,13 +302,13 @@ error_ret:
**/
static inline int sht15_calc_temp(struct sht15_data *data)
{
- int d1 = 0;
+ int d1 = temppoints[0].d1;
int i;
- for (i = 1; i < ARRAY_SIZE(temppoints); i++)
+ for (i = ARRAY_SIZE(temppoints) - 1; i > 0; i--)
/* Find pointer to interpolate */
if (data->supply_uV > temppoints[i - 1].vdd) {
- d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd)
+ d1 = (data->supply_uV - temppoints[i - 1].vdd)
* (temppoints[i].d1 - temppoints[i - 1].d1)
/ (temppoints[i].vdd - temppoints[i - 1].vdd)
+ temppoints[i - 1].d1;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jan Kiszka <[email protected]>
(Cherry-picked from commit e8861cfe2c75bdce36655b64d7ce02c2b31b604d)
A 16-bit TSS is only 44 bytes long. So make sure to test for the correct
size on task switch.
Signed-off-by: Jan Kiszka <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/x86.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4576,6 +4576,7 @@ int kvm_task_switch(struct kvm_vcpu *vcp
int ret = 0;
u32 old_tss_base = get_segment_base(vcpu, VCPU_SREG_TR);
u16 old_tss_sel = get_segment_selector(vcpu, VCPU_SREG_TR);
+ u32 desc_limit;
old_tss_base = vcpu->arch.mmu.gva_to_gpa(vcpu, old_tss_base);
@@ -4598,7 +4599,10 @@ int kvm_task_switch(struct kvm_vcpu *vcp
}
}
- if (!nseg_desc.p || get_desc_limit(&nseg_desc) < 0x67) {
+ desc_limit = get_desc_limit(&nseg_desc);
+ if (!nseg_desc.p ||
+ ((desc_limit < 0x67 && (nseg_desc.type & 8)) ||
+ desc_limit < 0x2b)) {
kvm_queue_exception_e(vcpu, TS_VECTOR, tss_selector & 0xfffc);
return 1;
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
> From: Pauli Nieminen <[email protected]>
> Date: Fri, 19 Mar 2010 07:44:33 +0000
> Subject: drm/radeon/kms: Fix NULL pointer dereference if memory allocation failed.
>
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
> From: Pauli Nieminen <[email protected]>
>
> commit fcbc451ba1948fba967198bd150ecbd10bbb7075 upstream.
>
> When there is allocation failure in radeon_cs_parser_relocs parser->nrelocs
> is not cleaned. This causes NULL pointer defeference in radeon_cs_parser_fini
> when clean up code is trying to loop over the relocation array and free the
> objects.
>
> Fix adds a check for a possible NULL pointer in clean up code.
[...]
This patch breaks compiling kernel 2.6.33 + the current stable queue:
CC [M] drivers/gpu/drm/radeon/radeon_cs.o
/tmp/buildd/linux-sidux-2.6-2.6.33/debian/build/source_amd64_none/drivers/gpu/drm/radeon/radeon_cs.c: In function 'radeon_cs_parser_fini':
/tmp/buildd/linux-sidux-2.6-2.6.33/debian/build/source_amd64_none/drivers/gpu/drm/radeon/radeon_cs.c:200: error: implicit declaration of function 'drm_gem_object_unreference_unlocked'
make[6]: *** [drivers/gpu/drm/radeon/radeon_cs.o] Error 1
as it depends on the introduction of drm_gem_object_unreference_unlocked()
in:
Commit: c3ae90c099bb62387507e86da7cf799850444b08
Author: Luca Barbieri <[email protected]>
AuthorDate: Tue Feb 9 05:49:11 2010 +0000
drm: introduce drm_gem_object_[handle_]unreference_unlocked
This patch introduces the drm_gem_object_unreference_unlocked
and drm_gem_object_handle_unreference_unlocked functions that
do not require holding struct_mutex.
drm_gem_object_unreference_unlocked calls the new
->gem_free_object_unlocked entry point if available, and
otherwise just takes struct_mutex and just calls ->gem_free_object
which in turn suggests:
Commit: bc9025bdc4e2b591734cca17697093845007b63d
Author: Luca Barbieri <[email protected]>
AuthorDate: Tue Feb 9 05:49:12 2010 +0000
Use drm_gem_object_[handle_]unreference_unlocked where possible
Mostly obvious simplifications.
The i915 pread/pwrite ioctls, intel_overlay_put_image and
nouveau_gem_new were incorrectly using the locked versions
without locking: this is also fixed in this patch.
which don't really look like candidates for 2.6.33-stable.
> --- a/drivers/gpu/drm/radeon/radeon_cs.c
> +++ b/drivers/gpu/drm/radeon/radeon_cs.c
> @@ -193,11 +193,13 @@ static void radeon_cs_parser_fini(struct
> radeon_bo_list_fence(&parser->validated, parser->ib->fence);
> }
> radeon_bo_list_unreserve(&parser->validated);
> - for (i = 0; i < parser->nrelocs; i++) {
> - if (parser->relocs[i].gobj) {
> - mutex_lock(&parser->rdev->ddev->struct_mutex);
> - drm_gem_object_unreference(parser->relocs[i].gobj);
> - mutex_unlock(&parser->rdev->ddev->struct_mutex);
> + if (parser->relocs != NULL) {
^ the only important part, the rest merely covers the new indentation
level
> + for (i = 0; i < parser->nrelocs; i++) {
> + if (parser->relocs[i].gobj) {
> + mutex_lock(&parser->rdev->ddev->struct_mutex);
> + drm_gem_object_unreference_unlocked(parser->relocs[i].gobj);
^ drm_gem_object_unreference_unlocked() doesn't exist in 2.6.33, yet
we can use drm_gem_object_unreference() instead.
> + mutex_unlock(&parser->rdev->ddev->struct_mutex);
> + }
> }
> }
> kfree(parser->track);
As a consequence, I'd suggest to merely backport the NULL pointer check,
while ignoring the simplification of using the newly introduced
drm_gem_object_unreference_unlocked() from 2.6.34:
Signed-off-by: Stefan Lippers-Hollmann <[email protected]>
Cc: Pauli Nieminen <[email protected]>
Cc: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_cs.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -193,11 +193,13 @@ static void radeon_cs_parser_fini(struct
radeon_bo_list_fence(&parser->validated, parser->ib->fence);
}
radeon_bo_list_unreserve(&parser->validated);
- for (i = 0; i < parser->nrelocs; i++) {
- if (parser->relocs[i].gobj) {
- mutex_lock(&parser->rdev->ddev->struct_mutex);
- drm_gem_object_unreference(parser->relocs[i].gobj);
- mutex_unlock(&parser->rdev->ddev->struct_mutex);
+ if (parser->relocs != NULL) {
+ for (i = 0; i < parser->nrelocs; i++) {
+ if (parser->relocs[i].gobj) {
+ mutex_lock(&parser->rdev->ddev->struct_mutex);
+ drm_gem_object_unreference(parser->relocs[i].gobj);
+ mutex_unlock(&parser->rdev->ddev->struct_mutex);
+ }
}
}
kfree(parser->track);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Al Viro <[email protected]>
commit 462d60577a997aa87c935ae4521bd303733a9f2b upstream.
RFC says we need to follow the chain of mounts if there's more
than one stacked on that point.
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfs4xdr.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -2121,9 +2121,15 @@ out_acl:
* and this is the root of a cross-mounted filesystem.
*/
if (ignore_crossmnt == 0 &&
- exp->ex_path.mnt->mnt_root->d_inode == dentry->d_inode) {
- err = vfs_getattr(exp->ex_path.mnt->mnt_parent,
- exp->ex_path.mnt->mnt_mountpoint, &stat);
+ dentry == exp->ex_path.mnt->mnt_root) {
+ struct path path = exp->ex_path;
+ path_get(&path);
+ while (follow_up(&path)) {
+ if (path.dentry != path.mnt->mnt_root)
+ break;
+ }
+ err = vfs_getattr(path.mnt, path.dentry, &stat);
+ path_put(&path);
if (err)
goto out_nfserr;
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Adam Lackorzynski <[email protected]>
commit 5b72d74ce2fccca2a301de60f31b16ddf5c93984 upstream.
Compiling 2.6.33 with SMP enabled and HOTPLUG_CPU disabled gives me the
following link errors:
LD init/built-in.o
LD .tmp_vmlinux1
arch/powerpc/platforms/built-in.o: In function `.smp_xics_setup_cpu':
smp.c:(.devinit.text+0x88): undefined reference to `.set_cpu_current_state'
smp.c:(.devinit.text+0x94): undefined reference to `.set_default_offline_state'
arch/powerpc/platforms/built-in.o: In function `.smp_pSeries_kick_cpu':
smp.c:(.devinit.text+0x13c): undefined reference to `.set_preferred_offline_state'
smp.c:(.devinit.text+0x148): undefined reference to `.get_cpu_current_state'
smp.c:(.devinit.text+0x1a8): undefined reference to `.get_cpu_current_state'
make: *** [.tmp_vmlinux1] Error 1
The following change fixes that for me and seems to work as expected.
Signed-off-by: Adam Lackorzynski <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/pseries/offline_states.h | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
--- a/arch/powerpc/platforms/pseries/offline_states.h
+++ b/arch/powerpc/platforms/pseries/offline_states.h
@@ -9,10 +9,30 @@ enum cpu_state_vals {
CPU_MAX_OFFLINE_STATES
};
+#ifdef CONFIG_HOTPLUG_CPU
extern enum cpu_state_vals get_cpu_current_state(int cpu);
extern void set_cpu_current_state(int cpu, enum cpu_state_vals state);
-extern enum cpu_state_vals get_preferred_offline_state(int cpu);
extern void set_preferred_offline_state(int cpu, enum cpu_state_vals state);
extern void set_default_offline_state(int cpu);
+#else
+static inline enum cpu_state_vals get_cpu_current_state(int cpu)
+{
+ return CPU_STATE_ONLINE;
+}
+
+static inline void set_cpu_current_state(int cpu, enum cpu_state_vals state)
+{
+}
+
+static inline void set_preferred_offline_state(int cpu, enum cpu_state_vals state)
+{
+}
+
+static inline void set_default_offline_state(int cpu)
+{
+}
+#endif
+
+extern enum cpu_state_vals get_preferred_offline_state(int cpu);
extern int start_secondary(void);
#endif
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Ping Cheng <[email protected]>
commit 014f61504af276ba9d9544d8a7401d8f8526eb73 upstream.
When Wacom devices wake up from a sleep, the switch mode command
(wacom_query_tablet_data) is needed before wacom_open is called.
wacom_query_tablet_data should not be executed inside wacom_open
since wacom_open is called more than once during probe.
wacom_retrieve_hid_descriptor is removed from wacom_resume due
to the fact that the required descriptors are stored properly
upon system resume.
Reported-and-tested-by: Anton Anikin <[email protected]>
Signed-off-by: Ping Cheng <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/tablet/wacom_sys.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -644,13 +644,15 @@ static int wacom_resume(struct usb_inter
int rv;
mutex_lock(&wacom->lock);
- if (wacom->open) {
+
+ /* switch to wacom mode first */
+ wacom_query_tablet_data(intf, features);
+
+ if (wacom->open)
rv = usb_submit_urb(wacom->irq, GFP_NOIO);
- /* switch to wacom mode if needed */
- if (!wacom_retrieve_hid_descriptor(intf, features))
- wacom_query_tablet_data(intf, features);
- } else
+ else
rv = 0;
+
mutex_unlock(&wacom->lock);
return rv;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Stefan Bader <[email protected]>
commit 9875557ee8247c3f7390d378c027b45c7535a224 upstream.
BugLink: http://bugs.launchpad.net/ubuntu/bugs/544671
This system claims to have a LVDS but has not.
Signed-off-by: Stephane Graber <[email protected]>
Signed-off-by: Stefan Bader <[email protected]>
Signed-off-by: Eric Anholt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_lvds.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -899,6 +899,14 @@ static const struct dmi_system_id intel_
DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
},
},
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Clientron U800",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "U800"),
+ },
+ },
{ } /* terminating entry */
};
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Trond Myklebust <[email protected]>
commit 0df5dd4aae211edeeeb84f7f84f6d093406d7c22 upstream.
Arnaud Giersch reports that NFSv4 locking is broken when we hold a
delegation since commit 8e469ebd6dc32cbaf620e134d79f740bf0ebab79 (NFSv4:
Don't allow posix locking against servers that don't support it).
According to Arnaud, the lock succeeds the first time he opens the file
(since we cannot do a delegated open) but then fails after we start using
delegated opens.
The following patch fixes it by ensuring that locking behaviour is
governed by a per-filesystem capability flag that is initially set, but
gets cleared if the server ever returns an OPEN without the
NFS4_OPEN_RESULT_LOCKTYPE_POSIX flag being set.
Reported-by: Arnaud Giersch <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/client.c | 3 ++-
fs/nfs/nfs4proc.c | 4 +++-
include/linux/nfs_fs_sb.h | 1 +
3 files changed, 6 insertions(+), 2 deletions(-)
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -1293,7 +1293,8 @@ static int nfs4_init_server(struct nfs_s
/* Initialise the client representation from the mount data */
server->flags = data->flags;
- server->caps |= NFS_CAP_ATOMIC_OPEN|NFS_CAP_CHANGE_ATTR;
+ server->caps |= NFS_CAP_ATOMIC_OPEN|NFS_CAP_CHANGE_ATTR|
+ NFS_CAP_POSIX_LOCK;
server->options = data->options;
/* Get a client record */
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1520,6 +1520,8 @@ static int _nfs4_proc_open(struct nfs4_o
nfs_post_op_update_inode(dir, o_res->dir_attr);
} else
nfs_refresh_inode(dir, o_res->dir_attr);
+ if ((o_res->rflags & NFS4_OPEN_RESULT_LOCKTYPE_POSIX) == 0)
+ server->caps &= ~NFS_CAP_POSIX_LOCK;
if(o_res->rflags & NFS4_OPEN_RESULT_CONFIRM) {
status = _nfs4_proc_open_confirm(data);
if (status != 0)
@@ -1660,7 +1662,7 @@ static int _nfs4_do_open(struct inode *d
status = PTR_ERR(state);
if (IS_ERR(state))
goto err_opendata_put;
- if ((opendata->o_res.rflags & NFS4_OPEN_RESULT_LOCKTYPE_POSIX) != 0)
+ if (server->caps & NFS_CAP_POSIX_LOCK)
set_bit(NFS_STATE_POSIX_LOCKS, &state->flags);
nfs4_opendata_put(opendata);
nfs4_put_state_owner(sp);
--- a/include/linux/nfs_fs_sb.h
+++ b/include/linux/nfs_fs_sb.h
@@ -176,6 +176,7 @@ struct nfs_server {
#define NFS_CAP_ATIME (1U << 11)
#define NFS_CAP_CTIME (1U << 12)
#define NFS_CAP_MTIME (1U << 13)
+#define NFS_CAP_POSIX_LOCK (1U << 14)
/* maximum number of slots to use */
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Suresh Siddha <[email protected]>
commit 472a474c6630efd195d3738339fd1bdc8aa3b1aa upstream.
Jan Grossmann reported kernel boot panic while booting SMP
kernel on his system with a single core cpu. SMP kernels call
enable_IR_x2apic() from native_smp_prepare_cpus() and on
platforms where the kernel doesn't find SMP configuration we
ended up again calling enable_IR_x2apic() from the
APIC_init_uniprocessor() call in the smp_sanity_check(). Thus
leading to kernel panic.
Don't call enable_IR_x2apic() and default_setup_apic_routing()
from APIC_init_uniprocessor() in CONFIG_SMP case.
NOTE: this kind of non-idempotent and assymetric initialization
sequence is rather fragile and unclean, we'll clean that up
in v2.6.35. This is the minimal fix for v2.6.34.
Reported-by: [email protected]
Signed-off-by: Suresh Siddha <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/apic/apic.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1640,8 +1640,10 @@ int __init APIC_init_uniprocessor(void)
}
#endif
+#ifndef CONFIG_SMP
enable_IR_x2apic();
default_setup_apic_routing();
+#endif
verify_local_APIC();
connect_bsp_APIC();
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Trond Myklebust <[email protected]>
commit 80e60639f1b7c121a7fea53920c5a4b94009361a upstream.
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/dir.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1025,12 +1025,12 @@ static struct dentry *nfs_atomic_lookup(
res = NULL;
goto out;
/* This turned out not to be a regular file */
+ case -EISDIR:
case -ENOTDIR:
goto no_open;
case -ELOOP:
if (!(nd->intent.open.flags & O_NOFOLLOW))
goto no_open;
- /* case -EISDIR: */
/* case -EINVAL: */
default:
goto out;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Borislav Petkov <[email protected]>
commit f619b3d8427eb57f0134dab75b0d217325c72411 upstream.
The show/store_cache_disable routines depend unnecessarily on NUMA's
cpu_to_node and the disabling of cache indices broke when !CONFIG_NUMA.
Remove that dependency by using a helper which is always correct.
While at it, enable L3 Cache Index disable on rev D1 Istanbuls which
sport the feature too.
Signed-off-by: Borislav Petkov <[email protected]>
LKML-Reference: <20100218184339.GG20473@aftab>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/intel_cacheinfo.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -327,7 +327,7 @@ amd_check_l3_disable(int index, struct _
/* see errata #382 and #388 */
if ((boot_cpu_data.x86 == 0x10) &&
- ((boot_cpu_data.x86_model < 0x9) ||
+ ((boot_cpu_data.x86_model < 0x8) ||
(boot_cpu_data.x86_mask < 0x1)))
return;
@@ -744,7 +744,7 @@ static ssize_t show_cache_disable(struct
unsigned int index)
{
int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
- int node = cpu_to_node(cpu);
+ int node = amd_get_nb_id(cpu);
struct pci_dev *dev = node_to_k8_nb_misc(node);
unsigned int reg = 0;
@@ -771,7 +771,7 @@ static ssize_t store_cache_disable(struc
const char *buf, size_t count, unsigned int index)
{
int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
- int node = cpu_to_node(cpu);
+ int node = amd_get_nb_id(cpu);
struct pci_dev *dev = node_to_k8_nb_misc(node);
unsigned long val = 0;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Terry Loftin <[email protected]>
commit dac876193cd79ced36d0462749ea47c05844fb49 upstream.
Tx ring buffers after tx_ring->next_to_use are volatile and could
change, possibly causing a crash. Stop cleaning when we hit
tx_ring->next_to_use.
Signed-off-by: Terry Loftin <[email protected]>
Acked-by: Bruce Allan <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Cc: Matthew Burgess <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/e1000e/netdev.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -660,6 +660,8 @@ static bool e1000_clean_tx_irq(struct e1
i = 0;
}
+ if (i == tx_ring->next_to_use)
+ break;
eop = tx_ring->buffer_info[i].next_to_watch;
eop_desc = E1000_TX_DESC(*tx_ring, eop);
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Alex Deucher <[email protected]>
commit 08d075116db3592db218bfe0f554cd93c9e12505 upstream.
On systems with the tv dac shared between DVI and TV,
we can only use the dac for one of the connectors.
However, when using a digital monitor on the DVI port,
you can use the dac for the TV connector just fine.
Check the use_digital status when resolving the conflict.
Fixes fdo bug 27649, possibly others.
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_connectors.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -162,12 +162,14 @@ radeon_connector_analog_encoder_conflict
{
struct drm_device *dev = connector->dev;
struct drm_connector *conflict;
+ struct radeon_connector *radeon_conflict;
int i;
list_for_each_entry(conflict, &dev->mode_config.connector_list, head) {
if (conflict == connector)
continue;
+ radeon_conflict = to_radeon_connector(conflict);
for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
if (conflict->encoder_ids[i] == 0)
break;
@@ -177,6 +179,9 @@ radeon_connector_analog_encoder_conflict
if (conflict->status != connector_status_connected)
continue;
+ if (radeon_conflict->use_digital)
+ continue;
+
if (priority == true) {
DRM_INFO("1: conflicting encoders switching off %s\n", drm_get_connector_name(conflict));
DRM_INFO("in favor of %s\n", drm_get_connector_name(connector));
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Seth Heasley <[email protected]>
commit 5623cab83ea61e0420f2064216d83eab067a24c6 upstream.
Signed-off-by: Seth Heasley <[email protected]>
Signed-off-by: Jeff Garzik <[email protected]>
Cc: maximilian attems <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/ahci.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -570,6 +570,12 @@ static const struct pci_device_id ahci_p
{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x1c02), board_ahci }, /* CPT AHCI */
+ { PCI_VDEVICE(INTEL, 0x1c03), board_ahci }, /* CPT AHCI */
+ { PCI_VDEVICE(INTEL, 0x1c04), board_ahci }, /* CPT RAID */
+ { PCI_VDEVICE(INTEL, 0x1c05), board_ahci }, /* CPT RAID */
+ { PCI_VDEVICE(INTEL, 0x1c06), board_ahci }, /* CPT RAID */
+ { PCI_VDEVICE(INTEL, 0x1c07), board_ahci }, /* CPT RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Borislav Petkov <[email protected]>
commit dcf39daf3d6d97f8741e82f0b9fb7554704ed2d1 upstream.
* Correct the masks used for writing the cache index disable indices.
* Do not turn off L3 scrubber - it is not necessary.
* Make sure wbinvd is executed on the same node where the L3 is.
* Check for out-of-bounds values written to the registers.
* Make show_cache_disable hex values unambiguous
* Check for Erratum #388
Signed-off-by: Borislav Petkov <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/intel_cacheinfo.c | 34 +++++++++++++++++++++-------------
1 file changed, 21 insertions(+), 13 deletions(-)
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -18,6 +18,7 @@
#include <asm/processor.h>
#include <linux/smp.h>
#include <asm/k8.h>
+#include <asm/smp.h>
#define LVL_1_INST 1
#define LVL_1_DATA 2
@@ -299,8 +300,10 @@ amd_check_l3_disable(int index, struct _
if (boot_cpu_data.x86 == 0x11)
return;
- /* see erratum #382 */
- if ((boot_cpu_data.x86 == 0x10) && (boot_cpu_data.x86_model < 0x8))
+ /* see errata #382 and #388 */
+ if ((boot_cpu_data.x86 == 0x10) &&
+ ((boot_cpu_data.x86_model < 0x9) ||
+ (boot_cpu_data.x86_mask < 0x1)))
return;
this_leaf->can_disable = 1;
@@ -726,12 +729,12 @@ static ssize_t show_cache_disable(struct
return -EINVAL;
pci_read_config_dword(dev, 0x1BC + index * 4, ®);
- return sprintf(buf, "%x\n", reg);
+ return sprintf(buf, "0x%08x\n", reg);
}
#define SHOW_CACHE_DISABLE(index) \
static ssize_t \
-show_cache_disable_##index(struct _cpuid4_info *this_leaf, char *buf) \
+show_cache_disable_##index(struct _cpuid4_info *this_leaf, char *buf) \
{ \
return show_cache_disable(this_leaf, buf, index); \
}
@@ -745,7 +748,9 @@ static ssize_t store_cache_disable(struc
int node = cpu_to_node(cpu);
struct pci_dev *dev = node_to_k8_nb_misc(node);
unsigned long val = 0;
- unsigned int scrubber = 0;
+
+#define SUBCACHE_MASK (3UL << 20)
+#define SUBCACHE_INDEX 0xfff
if (!this_leaf->can_disable)
return -EINVAL;
@@ -759,21 +764,24 @@ static ssize_t store_cache_disable(struc
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
- val |= 0xc0000000;
-
- pci_read_config_dword(dev, 0x58, &scrubber);
- scrubber &= ~0x1f000000;
- pci_write_config_dword(dev, 0x58, scrubber);
+ /* do not allow writes outside of allowed bits */
+ if (val & ~(SUBCACHE_MASK | SUBCACHE_INDEX))
+ return -EINVAL;
- pci_write_config_dword(dev, 0x1BC + index * 4, val & ~0x40000000);
- wbinvd();
+ val |= BIT(30);
pci_write_config_dword(dev, 0x1BC + index * 4, val);
+ /*
+ * We need to WBINVD on a core on the node containing the L3 cache which
+ * indices we disable therefore a simple wbinvd() is not sufficient.
+ */
+ wbinvd_on_cpu(cpu);
+ pci_write_config_dword(dev, 0x1BC + index * 4, val | BIT(31));
return count;
}
#define STORE_CACHE_DISABLE(index) \
static ssize_t \
-store_cache_disable_##index(struct _cpuid4_info *this_leaf, \
+store_cache_disable_##index(struct _cpuid4_info *this_leaf, \
const char *buf, size_t count) \
{ \
return store_cache_disable(this_leaf, buf, count, index); \
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: David S. Miller <[email protected]>
[ Upstream commit b857bd292223f54aaae3693c82fa7299a99991cd ]
We have to adjust 'reg_window' down by 16 becuase the 'pos' iterator
we'll use to index into the stack slots will be between 16 and 32.
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/sparc/kernel/ptrace_32.c | 4 ++++
arch/sparc/kernel/ptrace_64.c | 4 ++++
2 files changed, 8 insertions(+)
--- a/arch/sparc/kernel/ptrace_32.c
+++ b/arch/sparc/kernel/ptrace_32.c
@@ -65,6 +65,7 @@ static int genregs32_get(struct task_str
*k++ = regs->u_regs[pos++];
reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
for (; count > 0 && pos < 32; count--) {
if (get_user(*k++, ®_window[pos++]))
return -EFAULT;
@@ -76,6 +77,7 @@ static int genregs32_get(struct task_str
}
reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
for (; count > 0 && pos < 32; count--) {
if (get_user(reg, ®_window[pos++]) ||
put_user(reg, u++))
@@ -141,6 +143,7 @@ static int genregs32_set(struct task_str
regs->u_regs[pos++] = *k++;
reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
for (; count > 0 && pos < 32; count--) {
if (put_user(*k++, ®_window[pos++]))
return -EFAULT;
@@ -153,6 +156,7 @@ static int genregs32_set(struct task_str
}
reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
for (; count > 0 && pos < 32; count--) {
if (get_user(reg, u++) ||
put_user(reg, ®_window[pos++]))
--- a/arch/sparc/kernel/ptrace_64.c
+++ b/arch/sparc/kernel/ptrace_64.c
@@ -492,6 +492,7 @@ static int genregs32_get(struct task_str
*k++ = regs->u_regs[pos++];
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
if (target == current) {
for (; count > 0 && pos < 32; count--) {
if (get_user(*k++, ®_window[pos++]))
@@ -516,6 +517,7 @@ static int genregs32_get(struct task_str
}
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
if (target == current) {
for (; count > 0 && pos < 32; count--) {
if (get_user(reg, ®_window[pos++]) ||
@@ -599,6 +601,7 @@ static int genregs32_set(struct task_str
regs->u_regs[pos++] = *k++;
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
if (target == current) {
for (; count > 0 && pos < 32; count--) {
if (put_user(*k++, ®_window[pos++]))
@@ -625,6 +628,7 @@ static int genregs32_set(struct task_str
}
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
if (target == current) {
for (; count > 0 && pos < 32; count--) {
if (get_user(reg, u++) ||
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: =?UTF-8?q?Michel=20D=C3=A4nzer?= <[email protected]>
commit 57b54ea6b7863ccfeb41851b5f58f9fd1b83c79e upstream.
Gleaned from the Mesa code.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=27355 .
Signed-off-by: Michel Dänzer <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/r300.c | 5 +++--
drivers/gpu/drm/radeon/radeon_cp.c | 10 ++++++----
2 files changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -364,11 +364,12 @@ void r300_gpu_init(struct radeon_device
r100_hdp_reset(rdev);
/* FIXME: rv380 one pipes ? */
- if ((rdev->family == CHIP_R300) || (rdev->family == CHIP_R350)) {
+ if ((rdev->family == CHIP_R300 && rdev->pdev->device != 0x4144) ||
+ (rdev->family == CHIP_R350)) {
/* r300,r350 */
rdev->num_gb_pipes = 2;
} else {
- /* rv350,rv370,rv380 */
+ /* rv350,rv370,rv380,r300 AD */
rdev->num_gb_pipes = 1;
}
rdev->num_z_pipes = 1;
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -417,8 +417,9 @@ static int radeon_do_wait_for_idle(drm_r
return -EBUSY;
}
-static void radeon_init_pipes(drm_radeon_private_t *dev_priv)
+static void radeon_init_pipes(struct drm_device *dev)
{
+ drm_radeon_private_t *dev_priv = dev->dev_private;
uint32_t gb_tile_config, gb_pipe_sel = 0;
if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV530) {
@@ -436,11 +437,12 @@ static void radeon_init_pipes(drm_radeon
dev_priv->num_gb_pipes = ((gb_pipe_sel >> 12) & 0x3) + 1;
} else {
/* R3xx */
- if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300) ||
+ if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300 &&
+ dev->pdev->device != 0x4144) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350)) {
dev_priv->num_gb_pipes = 2;
} else {
- /* R3Vxx */
+ /* RV3xx/R300 AD */
dev_priv->num_gb_pipes = 1;
}
}
@@ -736,7 +738,7 @@ static int radeon_do_engine_reset(struct
/* setup the raster pipes */
if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R300)
- radeon_init_pipes(dev_priv);
+ radeon_init_pipes(dev);
/* Reset the CP ring */
radeon_do_cp_reset(dev_priv);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Felix Fietkau <[email protected]>
commit 1144601118507f8b3b676a9a392584d216d3f2cc upstream.
With the enable_radio being uninitialized, ath_radio_enable() might be
called twice, which can leave some hardware in an undefined state.
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath9k/main.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2721,8 +2721,7 @@ static int ath9k_config(struct ieee80211
all_wiphys_idle = ath9k_all_wiphys_idle(sc);
ath9k_set_wiphy_idle(aphy, idle);
- if (!idle && all_wiphys_idle)
- enable_radio = true;
+ enable_radio = (!idle && all_wiphys_idle);
/*
* After we unlock here its possible another wiphy
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Alex Deucher <[email protected]>
commit 3a89b4a9ca7ce11e3b7d5119aea917b9fc29a302 upstream.
Some vbios dac_adj tables are all zeros. Check for that
case and use the default table if so.
Should fix fdo bug 27478.
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_combios.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -670,7 +670,9 @@ struct radeon_encoder_primary_dac *radeo
dac = RBIOS8(dac_info + 0x3) & 0xf;
p_dac->ps2_pdac_adj = (bg << 8) | (dac);
}
- found = 1;
+ /* if the values are all zeros, use the table */
+ if (p_dac->ps2_pdac_adj)
+ found = 1;
}
out:
@@ -812,7 +814,9 @@ struct radeon_encoder_tv_dac *radeon_com
bg = RBIOS8(dac_info + 0x10) & 0xf;
dac = RBIOS8(dac_info + 0x11) & 0xf;
tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20);
- found = 1;
+ /* if the values are all zeros, use the table */
+ if (tv_dac->ps2_tvdac_adj)
+ found = 1;
} else if (rev > 1) {
bg = RBIOS8(dac_info + 0xc) & 0xf;
dac = (RBIOS8(dac_info + 0xc) >> 4) & 0xf;
@@ -825,7 +829,9 @@ struct radeon_encoder_tv_dac *radeon_com
bg = RBIOS8(dac_info + 0xe) & 0xf;
dac = (RBIOS8(dac_info + 0xe) >> 4) & 0xf;
tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20);
- found = 1;
+ /* if the values are all zeros, use the table */
+ if (tv_dac->ps2_tvdac_adj)
+ found = 1;
}
tv_dac->tv_std = radeon_combios_get_tv_info(rdev);
}
@@ -842,7 +848,9 @@ struct radeon_encoder_tv_dac *radeon_com
(bg << 16) | (dac << 20);
tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
- found = 1;
+ /* if the values are all zeros, use the table */
+ if (tv_dac->ps2_tvdac_adj)
+ found = 1;
} else {
bg = RBIOS8(dac_info + 0x4) & 0xf;
dac = RBIOS8(dac_info + 0x5) & 0xf;
@@ -850,7 +858,9 @@ struct radeon_encoder_tv_dac *radeon_com
(bg << 16) | (dac << 20);
tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
- found = 1;
+ /* if the values are all zeros, use the table */
+ if (tv_dac->ps2_tvdac_adj)
+ found = 1;
}
} else {
DRM_INFO("No TV DAC info found in BIOS\n");
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Alex Deucher <[email protected]>
commit 643acacf02679befd0f98ac3c5fecb805f1c9548 upstream.
bad cast was overwriting the tvdac adj values
Fixes fdo bug 27478
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_connectors.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -315,7 +315,7 @@ int radeon_connector_set_property(struct
radeon_encoder = to_radeon_encoder(encoder);
if (!radeon_encoder->enc_priv)
return 0;
- if (rdev->is_atom_bios) {
+ if (ASIC_IS_AVIVO(rdev) || radeon_r4xx_atom) {
struct radeon_encoder_atom_dac *dac_int;
dac_int = radeon_encoder->enc_priv;
dac_int->tv_std = val;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jan Kiszka <[email protected]>
(Cherry-picked from commit c573cd22939e54fc1b8e672054a505048987a7cb)
We intercept #BP while in guest debugging mode. As VM exits due to
intercepted exceptions do not necessarily come with valid
idt_vectoring, we have to update event_exit_inst_len explicitly in such
cases. At least in the absence of migration, this ensures that
re-injections of #BP will find and use the correct instruction length.
Signed-off-by: Jan Kiszka <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2719,6 +2719,12 @@ static int handle_rmode_exception(struct
kvm_queue_exception(vcpu, vec);
return 1;
case BP_VECTOR:
+ /*
+ * Update instruction length as we may reinject the exception
+ * from user space while in guest debugging mode.
+ */
+ to_vmx(vcpu)->vcpu.arch.event_exit_inst_len =
+ vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
return 0;
/* fall through */
@@ -2841,6 +2847,13 @@ static int handle_exception(struct kvm_v
kvm_run->debug.arch.dr7 = vmcs_readl(GUEST_DR7);
/* fall through */
case BP_VECTOR:
+ /*
+ * Update instruction length as we may reinject #BP from
+ * user space while in guest debugging mode. Reading it for
+ * #DB as well causes no harm, it is not used in that case.
+ */
+ vmx->vcpu.arch.event_exit_inst_len =
+ vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
kvm_run->exit_reason = KVM_EXIT_DEBUG;
kvm_run->debug.arch.pc = vmcs_readl(GUEST_CS_BASE) + rip;
kvm_run->debug.arch.exception = ex_no;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Dave Chinner <[email protected]>
commit 77d7a0c2eeb285c9069e15396703d0cb9690ac50 upstream.
The introduction of barriers to loop devices has created a new IO
order completion dependency that XFS does not handle. The loop
device implements barriers using fsync and so turns a log IO in the
XFS filesystem on the loop device into a data IO in the backing
filesystem. That is, the completion of log IOs in the loop
filesystem are now dependent on completion of data IO in the backing
filesystem.
This can cause deadlocks when a flush daemon issues a log force with
an inode locked because the IO completion of IO on the inode is
blocked by the inode lock. This in turn prevents further data IO
completion from occuring on all XFS filesystems on that CPU (due to
the shared nature of the completion queues). This then prevents the
log IO from completing because the log is waiting for data IO
completion as well.
The fix for this new completion order dependency issue is to make
the IO completion inode locking non-blocking. If the inode lock
can't be grabbed, simply requeue the IO completion back to the work
queue so that it can be processed later. This prevents the
completion queue from being blocked and allows data IO completion on
other inodes to proceed, hence avoiding completion order dependent
deadlocks.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/xfs/linux-2.6/xfs_aops.c | 93 ++++++++++++++++++++++++++------------------
1 file changed, 56 insertions(+), 37 deletions(-)
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -163,14 +163,17 @@ xfs_ioend_new_eof(
}
/*
- * Update on-disk file size now that data has been written to disk.
- * The current in-memory file size is i_size. If a write is beyond
- * eof i_new_size will be the intended file size until i_size is
- * updated. If this write does not extend all the way to the valid
- * file size then restrict this update to the end of the write.
+ * Update on-disk file size now that data has been written to disk. The
+ * current in-memory file size is i_size. If a write is beyond eof i_new_size
+ * will be the intended file size until i_size is updated. If this write does
+ * not extend all the way to the valid file size then restrict this update to
+ * the end of the write.
+ *
+ * This function does not block as blocking on the inode lock in IO completion
+ * can lead to IO completion order dependency deadlocks.. If it can't get the
+ * inode ilock it will return EAGAIN. Callers must handle this.
*/
-
-STATIC void
+STATIC int
xfs_setfilesize(
xfs_ioend_t *ioend)
{
@@ -181,9 +184,11 @@ xfs_setfilesize(
ASSERT(ioend->io_type != IOMAP_READ);
if (unlikely(ioend->io_error))
- return;
+ return 0;
+
+ if (!xfs_ilock_nowait(ip, XFS_ILOCK_EXCL))
+ return EAGAIN;
- xfs_ilock(ip, XFS_ILOCK_EXCL);
isize = xfs_ioend_new_eof(ioend);
if (isize) {
ip->i_d.di_size = isize;
@@ -191,6 +196,28 @@ xfs_setfilesize(
}
xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ return 0;
+}
+
+/*
+ * Schedule IO completion handling on a xfsdatad if this was
+ * the final hold on this ioend. If we are asked to wait,
+ * flush the workqueue.
+ */
+STATIC void
+xfs_finish_ioend(
+ xfs_ioend_t *ioend,
+ int wait)
+{
+ if (atomic_dec_and_test(&ioend->io_remaining)) {
+ struct workqueue_struct *wq;
+
+ wq = (ioend->io_type == IOMAP_UNWRITTEN) ?
+ xfsconvertd_workqueue : xfsdatad_workqueue;
+ queue_work(wq, &ioend->io_work);
+ if (wait)
+ flush_workqueue(wq);
+ }
}
/*
@@ -198,11 +225,11 @@ xfs_setfilesize(
*/
STATIC void
xfs_end_io(
- struct work_struct *work)
+ struct work_struct *work)
{
- xfs_ioend_t *ioend =
- container_of(work, xfs_ioend_t, io_work);
- struct xfs_inode *ip = XFS_I(ioend->io_inode);
+ xfs_ioend_t *ioend = container_of(work, xfs_ioend_t, io_work);
+ struct xfs_inode *ip = XFS_I(ioend->io_inode);
+ int error;
/*
* For unwritten extents we need to issue transactions to convert a
@@ -210,7 +237,6 @@ xfs_end_io(
*/
if (ioend->io_type == IOMAP_UNWRITTEN &&
likely(!ioend->io_error && !XFS_FORCED_SHUTDOWN(ip->i_mount))) {
- int error;
error = xfs_iomap_write_unwritten(ip, ioend->io_offset,
ioend->io_size);
@@ -222,30 +248,23 @@ xfs_end_io(
* We might have to update the on-disk file size after extending
* writes.
*/
- if (ioend->io_type != IOMAP_READ)
- xfs_setfilesize(ioend);
- xfs_destroy_ioend(ioend);
-}
-
-/*
- * Schedule IO completion handling on a xfsdatad if this was
- * the final hold on this ioend. If we are asked to wait,
- * flush the workqueue.
- */
-STATIC void
-xfs_finish_ioend(
- xfs_ioend_t *ioend,
- int wait)
-{
- if (atomic_dec_and_test(&ioend->io_remaining)) {
- struct workqueue_struct *wq;
-
- wq = (ioend->io_type == IOMAP_UNWRITTEN) ?
- xfsconvertd_workqueue : xfsdatad_workqueue;
- queue_work(wq, &ioend->io_work);
- if (wait)
- flush_workqueue(wq);
+ if (ioend->io_type != IOMAP_READ) {
+ error = xfs_setfilesize(ioend);
+ ASSERT(!error || error == EAGAIN);
}
+
+ /*
+ * If we didn't complete processing of the ioend, requeue it to the
+ * tail of the workqueue for another attempt later. Otherwise destroy
+ * it.
+ */
+ if (error == EAGAIN) {
+ atomic_inc(&ioend->io_remaining);
+ xfs_finish_ioend(ioend, 0);
+ /* ensure we don't spin on blocked ioends */
+ delay(1);
+ } else
+ xfs_destroy_ioend(ioend);
}
/*
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Daniel T Chen <[email protected]>
commit b8e80cf386419453678b01bef830f53445ebb15d upstream.
BugLink: https://launchpad.net/bugs/551606
The OR's hardware distorts at PCM 100% because it does not correspond to
0 dB. Fix this in patch_ad1981() for all models using the Thinkpad
quirk.
Reported-by: Jane Silber
Signed-off-by: Daniel T Chen <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_analog.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -1805,6 +1805,14 @@ static int patch_ad1981(struct hda_codec
case AD1981_THINKPAD:
spec->mixers[0] = ad1981_thinkpad_mixers;
spec->input_mux = &ad1981_thinkpad_capture_source;
+ /* set the upper-limit for mixer amp to 0dB for avoiding the
+ * possible damage by overloading
+ */
+ snd_hda_override_amp_caps(codec, 0x11, HDA_INPUT,
+ (0x17 << AC_AMPCAP_OFFSET_SHIFT) |
+ (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) |
+ (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) |
+ (1 << AC_AMPCAP_MUTE_SHIFT));
break;
case AD1981_TOSHIBA:
spec->mixers[0] = ad1981_hp_mixers;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Mathieu Desnoyers <[email protected]>
The mainline kernel as of 2.6.34-rc5 is not affected by this problem because
commit 10fad5e46f6c7bdfb01b1a012380a38e3c6ab346 fixed it by refactoring.
lockdep fix incorrect percpu usage
Should use per_cpu_ptr() to obfuscate the per cpu pointers (RELOC_HIDE is needed
for per cpu pointers).
git blame points to commit:
lockdep.c: commit 8e18257d29238311e82085152741f0c3aa18b74d
But it's really just moving the code around. But it's enough to say that the
problems appeared before Jul 19 01:48:54 2007, which brings us back to 2.6.23.
It should be applied to stable 2.6.23.x to 2.6.33.x (or whichever of these
stable branches are still maintained).
(tested on 2.6.33.1 x86_64)
Signed-off-by: Mathieu Desnoyers <[email protected]>
CC: Randy Dunlap <[email protected]>
CC: Eric Dumazet <[email protected]>
CC: Rusty Russell <[email protected]>
CC: Peter Zijlstra <[email protected]>
CC: Tejun Heo <[email protected]>
CC: Ingo Molnar <[email protected]>
CC: Andrew Morton <[email protected]>
CC: Linus Torvalds <[email protected]>
CC: Greg Kroah-Hartman <[email protected]>
CC: Steven Rostedt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/lockdep.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -600,9 +600,9 @@ static int static_obj(void *obj)
* percpu var?
*/
for_each_possible_cpu(i) {
- start = (unsigned long) &__per_cpu_start + per_cpu_offset(i);
- end = (unsigned long) &__per_cpu_start + PERCPU_ENOUGH_ROOM
- + per_cpu_offset(i);
+ start = (unsigned long) per_cpu_ptr(&__per_cpu_start, i);
+ end = (unsigned long) per_cpu_ptr(&__per_cpu_start
+ + PERCPU_ENOUGH_ROOM, i);
if ((addr >= start) && (addr < end))
return 1;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Anton Blanchard <[email protected]>
commit 55ab3a1ff843e3f0e24d2da44e71bffa5d853010 upstream.
Commit 148f948ba877f4d3cdef036b1ff6d9f68986706a (vfs: Introduce new
helpers for syncing after writing to O_SYNC file or IS_SYNC inode) broke
the raw driver.
We now call through generic_file_aio_write -> generic_write_sync ->
vfs_fsync_range. vfs_fsync_range has:
if (!fop || !fop->fsync) {
ret = -EINVAL;
goto out;
}
But drivers/char/raw.c doesn't set an fsync method.
We have two options: fix it or remove the raw driver completely. I'm
happy to do either, the fact this has been broken for so long suggests it
is rarely used.
The patch below adds an fsync method to the raw driver. My knowledge of
the block layer is pretty sketchy so this could do with a once over.
If we instead decide to remove the raw driver, this patch might still be
useful as a backport to 2.6.33 and 2.6.32.
Signed-off-by: Anton Blanchard <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Jens Axboe <[email protected]>
Reviewed-by: Jeff Moyer <[email protected]>
Tested-by: Jeff Moyer <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/raw.c | 1 +
fs/block_dev.c | 3 ++-
include/linux/fs.h | 1 +
3 files changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -247,6 +247,7 @@ static const struct file_operations raw_
.aio_read = generic_file_aio_read,
.write = do_sync_write,
.aio_write = blkdev_aio_write,
+ .fsync = block_fsync,
.open = raw_open,
.release= raw_release,
.ioctl = raw_ioctl,
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -404,7 +404,7 @@ static loff_t block_llseek(struct file *
* NULL first argument is nfsd_sync_dir() and that's not a directory.
*/
-static int block_fsync(struct file *filp, struct dentry *dentry, int datasync)
+int block_fsync(struct file *filp, struct dentry *dentry, int datasync)
{
struct block_device *bdev = I_BDEV(filp->f_mapping->host);
int error;
@@ -418,6 +418,7 @@ static int block_fsync(struct file *filp
error = 0;
return error;
}
+EXPORT_SYMBOL(block_fsync);
/*
* pseudo-fs
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2214,6 +2214,7 @@ extern int generic_segment_checks(const
/* fs/block_dev.c */
extern ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos);
+extern int block_fsync(struct file *filp, struct dentry *dentry, int datasync);
/* fs/splice.c */
extern ssize_t generic_file_splice_read(struct file *, loff_t *,
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Javier Cardona <[email protected]>
commit 1cb561f83793191cf86a2db3948d28f5f42df9ff upstream.
This fixes the problem introduced in commit
8404080568613d93ad7cf0a16dfb68 which broke mesh peer link establishment.
changes:
v2 Added missing break (Johannes)
v3 Broke original patch into two (Johannes)
Signed-off-by: Javier Cardona <[email protected]>
Reviewed-by: Johannes Berg <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/mesh.c | 3 ---
net/mac80211/rx.c | 5 +++++
2 files changed, 5 insertions(+), 3 deletions(-)
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -749,9 +749,6 @@ ieee80211_mesh_rx_mgmt(struct ieee80211_
switch (fc & IEEE80211_FCTL_STYPE) {
case IEEE80211_STYPE_ACTION:
- if (skb->len < IEEE80211_MIN_ACTION_SIZE)
- return RX_DROP_MONITOR;
- /* fall through */
case IEEE80211_STYPE_PROBE_RESP:
case IEEE80211_STYPE_BEACON:
skb_queue_tail(&ifmsh->skb_queue, skb);
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2355,6 +2355,11 @@ static int prepare_for_handlers(struct i
/* should never get here */
WARN_ON(1);
break;
+ case MESH_PLINK_CATEGORY:
+ case MESH_PATH_SEL_CATEGORY:
+ if (ieee80211_vif_is_mesh(&sdata->vif))
+ return ieee80211_mesh_rx_mgmt(sdata, rx->skb);
+ break;
}
return 1;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Wey-Yi Guy <[email protected]>
commit ece6444c2fe80dab679beb5f0d58b091f1933b00 upstream.
For 4965, need to check it is valid qos frame before free, only valid
QoS frame has the tid used to free the packets.
Signed-off-by: Wey-Yi Guy <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-4965.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2008,7 +2008,9 @@ static void iwl4965_rx_reply_tx(struct i
IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn "
"%d index %d\n", scd_ssn , index);
freed = iwl_tx_queue_reclaim(priv, txq_id, index);
- iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
+ if (qc)
+ iwl_free_tfds_in_queue(priv, sta_id,
+ tid, freed);
if (priv->mac80211_registered &&
(iwl_queue_space(&txq->q) > txq->q.low_mark) &&
@@ -2034,14 +2036,17 @@ static void iwl4965_rx_reply_tx(struct i
tx_resp->failure_frame);
freed = iwl_tx_queue_reclaim(priv, txq_id, index);
- iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
+ if (qc && likely(sta_id != IWL_INVALID_STATION))
+ iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
+ else if (sta_id == IWL_INVALID_STATION)
+ IWL_DEBUG_TX_REPLY(priv, "Station not known\n");
if (priv->mac80211_registered &&
(iwl_queue_space(&txq->q) > txq->q.low_mark))
iwl_wake_queue(priv, txq_id);
}
-
- iwl_txq_check_empty(priv, sta_id, tid, txq_id);
+ if (qc && likely(sta_id != IWL_INVALID_STATION))
+ iwl_txq_check_empty(priv, sta_id, tid, txq_id);
if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
IWL_ERR(priv, "TODO: Implement Tx ABORT REQUIRED!!!\n");
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Tejun Heo <[email protected]>
commit 68b0ddb289220b6d4d865be128939663be34959d upstream.
Crucial said,
Thank you for contacting us. We know that with our M225 line of SSDs
you sometimes need to disable NCQ (native command queuing) to avoid
just the type of errors you're seeing. Our recommendation for the
M225 is to add libata.force=noncq to your Linux kernel boot options,
under the kernel ATA library option.
I have sent your feedback to the engineers working on the C300, and
asked them to please pass it on to the firmware team. I have been
notified that they are in the process of testing and finalizing a
new firmware version, that you can expect to see released around the
end of April. We’ll keep you posted as to when it will be available
for download.
So, turn off NCQ on the drive w/ the current firmware revision.
Reported in the following bug.
https://bugzilla.kernel.org/show_bug.cgi?id=15573
Signed-off-by: Tejun Heo <[email protected]>
Reported-by: [email protected]
Reported-by: Luke Macken <[email protected]>
Signed-off-by: Jeff Garzik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/libata-core.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4348,6 +4348,9 @@ static const struct ata_blacklist_entry
{ "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, },
{ "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, },
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=15573 */
+ { "C300-CTFDDAC128MAG", "0001", ATA_HORKAGE_NONCQ, },
+
/* devices which puke on READ_NATIVE_MAX */
{ "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, },
{ "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA },
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Dan Carpenter <[email protected]>
commit b0cc58a25d04160d39a80e436847eaa2fbc5aa09 upstream.
The original code doesn't take into consideration that the value of
MIXART_BA0_SIZE - pos can be less than zero which would lead to a large
unsigned value for "count".
Also I moved the check that read size is a multiple of 4 bytes below
the code that adjusts "count".
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/mixart/mixart.c | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -1161,13 +1161,15 @@ static long snd_mixart_BA0_read(struct s
unsigned long count, unsigned long pos)
{
struct mixart_mgr *mgr = entry->private_data;
+ unsigned long maxsize;
- count = count & ~3; /* make sure the read size is a multiple of 4 bytes */
- if(count <= 0)
+ if (pos >= MIXART_BA0_SIZE)
return 0;
- if(pos + count > MIXART_BA0_SIZE)
- count = (long)(MIXART_BA0_SIZE - pos);
- if(copy_to_user_fromio(buf, MIXART_MEM( mgr, pos ), count))
+ maxsize = MIXART_BA0_SIZE - pos;
+ if (count > maxsize)
+ count = maxsize;
+ count = count & ~3; /* make sure the read size is a multiple of 4 bytes */
+ if (copy_to_user_fromio(buf, MIXART_MEM(mgr, pos), count))
return -EFAULT;
return count;
}
@@ -1180,13 +1182,15 @@ static long snd_mixart_BA1_read(struct s
unsigned long count, unsigned long pos)
{
struct mixart_mgr *mgr = entry->private_data;
+ unsigned long maxsize;
- count = count & ~3; /* make sure the read size is a multiple of 4 bytes */
- if(count <= 0)
+ if (pos > MIXART_BA1_SIZE)
return 0;
- if(pos + count > MIXART_BA1_SIZE)
- count = (long)(MIXART_BA1_SIZE - pos);
- if(copy_to_user_fromio(buf, MIXART_REG( mgr, pos ), count))
+ maxsize = MIXART_BA1_SIZE - pos;
+ if (count > maxsize)
+ count = maxsize;
+ count = count & ~3; /* make sure the read size is a multiple of 4 bytes */
+ if (copy_to_user_fromio(buf, MIXART_REG(mgr, pos), count))
return -EFAULT;
return count;
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Shaohua Li <[email protected]>
commit 8ae06d223f8203c72104e5c0c4ee49a000aedb42 upstream.
Colin King reported a strange oops in S4 resume code path (see below). The test
system has i5/i7 CPU. The kernel doesn't open PAE, so 4M page table is used.
The oops always happen a virtual address 0xc03ff000, which is mapped to the
last 4k of first 4M memory. Doing a global tlb flush fixes the issue.
EIP: 0060:[<c0493a01>] EFLAGS: 00010086 CPU: 0
EIP is at copy_loop+0xe/0x15
EAX: 36aeb000 EBX: 00000000 ECX: 00000400 EDX: f55ad46c
ESI: 0f800000 EDI: c03ff000 EBP: f67fbec4 ESP: f67fbea8
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
...
...
CR2: 00000000c03ff000
Tested-by: Colin Ian King <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
LKML-Reference: <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/power/hibernate_asm_32.S | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
--- a/arch/x86/power/hibernate_asm_32.S
+++ b/arch/x86/power/hibernate_asm_32.S
@@ -27,10 +27,17 @@ ENTRY(swsusp_arch_suspend)
ret
ENTRY(restore_image)
+ movl mmu_cr4_features, %ecx
movl resume_pg_dir, %eax
subl $__PAGE_OFFSET, %eax
movl %eax, %cr3
+ jecxz 1f # cr4 Pentium and higher, skip if zero
+ andl $~(X86_CR4_PGE), %ecx
+ movl %ecx, %cr4; # turn off PGE
+ movl %cr3, %eax; # flush TLB
+ movl %eax, %cr3
+1:
movl restore_pblist, %edx
.p2align 4,,7
@@ -54,16 +61,8 @@ done:
movl $swapper_pg_dir, %eax
subl $__PAGE_OFFSET, %eax
movl %eax, %cr3
- /* Flush TLB, including "global" things (vmalloc) */
movl mmu_cr4_features, %ecx
jecxz 1f # cr4 Pentium and higher, skip if zero
- movl %ecx, %edx
- andl $~(X86_CR4_PGE), %edx
- movl %edx, %cr4; # turn off PGE
-1:
- movl %cr3, %eax; # flush TLB
- movl %eax, %cr3
- jecxz 1f # cr4 Pentium and higher, skip if zero
movl %ecx, %cr4; # turn PGE back on
1:
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Avi Kivity <[email protected]>
commit 0d1622d7f526311d87d7da2ee7dd14b73e45d3fc upstream.
The Intel Architecture Optimization Reference Manual states that a short
load that follows a long store to the same object will suffer a store
forwading penalty, particularly if the two accesses use different addresses.
Trivially, a long load that follows a short store will also suffer a penalty.
__downgrade_write() in rwsem incurs both penalties: the increment operation
will not be able to reuse a recently-loaded rwsem value, and its result will
not be reused by any recently-following rwsem operation.
A comment in the code states that this is because 64-bit immediates are
special and expensive; but while they are slightly special (only a single
instruction allows them), they aren't expensive: a test shows that two loops,
one loading a 32-bit immediate and one loading a 64-bit immediate, both take
1.5 cycles per iteration.
Fix this by changing __downgrade_write to use the same add instruction on
i386 and on x86_64, so that it uses the same operand size as all the other
rwsem functions.
Signed-off-by: Avi Kivity <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/rwsem.h | 25 +++++--------------------
1 file changed, 5 insertions(+), 20 deletions(-)
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -232,34 +232,19 @@ static inline void __up_write(struct rw_
*/
static inline void __downgrade_write(struct rw_semaphore *sem)
{
-#ifdef CONFIG_X86_64
-# if RWSEM_WAITING_BIAS != -0x100000000
-# error "This code assumes RWSEM_WAITING_BIAS == -2^32"
-# endif
-
- /* 64-bit immediates are special and expensive, and not needed here */
- asm volatile("# beginning __downgrade_write\n\t"
- LOCK_PREFIX "incl 4(%1)\n\t"
- /* transitions 0xZZZZZZZZ00000001 -> 0xYYYYYYYY00000001 */
- " jns 1f\n\t"
- " call call_rwsem_downgrade_wake\n"
- "1:\n\t"
- "# ending __downgrade_write\n"
- : "+m" (sem->count)
- : "a" (sem)
- : "memory", "cc");
-#else
asm volatile("# beginning __downgrade_write\n\t"
LOCK_PREFIX _ASM_ADD "%2,(%1)\n\t"
- /* transitions 0xZZZZ0001 -> 0xYYYY0001 */
+ /*
+ * transitions 0xZZZZ0001 -> 0xYYYY0001 (i386)
+ * 0xZZZZZZZZ00000001 -> 0xYYYYYYYY00000001 (x86_64)
+ */
" jns 1f\n\t"
" call call_rwsem_downgrade_wake\n"
"1:\n\t"
"# ending __downgrade_write\n"
: "+m" (sem->count)
- : "a" (sem), "i" (-RWSEM_WAITING_BIAS)
+ : "a" (sem), "er" (-RWSEM_WAITING_BIAS)
: "memory", "cc");
-#endif
}
/*
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Borislav Petkov <[email protected]>
commit a7b480e7f30b3813353ec009f10f2ac7a6669f3b upstream.
Add wbinvd_on_cpu and wbinvd_on_all_cpus stubs for executing wbinvd on a
particular CPU.
[ hpa: renamed lib/smp.c to lib/cache-smp.c ]
[ hpa: wbinvd_on_all_cpus() returns int, but wbinvd() returns
void. Thus, the former cannot be a macro for the latter,
replace with an inline function. ]
Signed-off-by: Borislav Petkov <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/smp.h | 9 +++++++++
arch/x86/lib/Makefile | 2 +-
arch/x86/lib/cache-smp.c | 19 +++++++++++++++++++
3 files changed, 29 insertions(+), 1 deletion(-)
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -135,6 +135,8 @@ int native_cpu_disable(void);
void native_cpu_die(unsigned int cpu);
void native_play_dead(void);
void play_dead_common(void);
+void wbinvd_on_cpu(int cpu);
+int wbinvd_on_all_cpus(void);
void native_send_call_func_ipi(const struct cpumask *mask);
void native_send_call_func_single_ipi(int cpu);
@@ -147,6 +149,13 @@ static inline int num_booting_cpus(void)
{
return cpumask_weight(cpu_callout_mask);
}
+#else /* !CONFIG_SMP */
+#define wbinvd_on_cpu(cpu) wbinvd()
+static inline int wbinvd_on_all_cpus(void)
+{
+ wbinvd();
+ return 0;
+}
#endif /* CONFIG_SMP */
extern unsigned disabled_cpus __cpuinitdata;
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -14,7 +14,7 @@ $(obj)/inat.o: $(obj)/inat-tables.c
clean-files := inat-tables.c
-obj-$(CONFIG_SMP) += msr-smp.o
+obj-$(CONFIG_SMP) += msr-smp.o cache-smp.o
lib-y := delay.o
lib-y += thunk_$(BITS).o
--- /dev/null
+++ b/arch/x86/lib/cache-smp.c
@@ -0,0 +1,19 @@
+#include <linux/smp.h>
+#include <linux/module.h>
+
+static void __wbinvd(void *dummy)
+{
+ wbinvd();
+}
+
+void wbinvd_on_cpu(int cpu)
+{
+ smp_call_function_single(cpu, __wbinvd, NULL, 1);
+}
+EXPORT_SYMBOL(wbinvd_on_cpu);
+
+int wbinvd_on_all_cpus(void)
+{
+ return on_each_cpu(__wbinvd, NULL, 1);
+}
+EXPORT_SYMBOL(wbinvd_on_all_cpus);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Thomas Gleixner <[email protected]>
commit 753649dbc49345a73a2454c770a3f2d54d11aec6 upstream.
Network folks reported that directing all MSI-X vectors of their multi
queue NICs to a single core can cause interrupt stack overflows when
enough interrupts fire at the same time.
This is caused by the fact that we run interrupt handlers by default
with interrupts enabled unless the driver reuqests the interrupt with
the IRQF_DISABLED set. The NIC handlers do not set this flag, so
simultaneous interrupts can nest unlimited and cause the stack
overflow.
The only safe counter measure is to run the interrupt handlers with
interrupts disabled. We can't switch to this mode in general right
now, but it is safe to do so for MSI interrupts.
Force IRQF_DISABLED for MSI interrupt handlers.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Alan Cox <[email protected]>
Cc: David Miller <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/irq/manage.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -753,6 +753,16 @@ __setup_irq(unsigned int irq, struct irq
if (new->flags & IRQF_ONESHOT)
desc->status |= IRQ_ONESHOT;
+ /*
+ * Force MSI interrupts to run with interrupts
+ * disabled. The multi vector cards can cause stack
+ * overflows due to nested interrupts when enough of
+ * them are directed to a core and fire at the same
+ * time.
+ */
+ if (desc->msi_desc)
+ new->flags |= IRQF_DISABLED;
+
if (!(desc->status & IRQ_NOAUTOEN)) {
desc->depth = 0;
desc->status &= ~IRQ_DISABLED;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Suresh Jayaraman <[email protected]>
commit 6513a81e9325d712f1bfb9a1d7b750134e49ff18 upstream.
While chasing a bug report involving a OS/2 server, I noticed the server sets
pSMBr->CountHigh to a incorrect value even in case of normal writes. This
results in 'nbytes' being computed wrongly and triggers a kernel BUG at
mm/filemap.c.
void iov_iter_advance(struct iov_iter *i, size_t bytes)
{
BUG_ON(i->count < bytes); <--- BUG here
Why the server is setting 'CountHigh' is not clear but only does so after
writing 64k bytes. Though this looks like the server bug, the client side
crash may not be acceptable.
The workaround is to mask off high 16 bits if the number of bytes written as
returned by the server is greater than the bytes requested by the client as
suggested by Jeff Layton.
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Suresh Jayaraman <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/cifssmb.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1517,6 +1517,14 @@ CIFSSMBWrite(const int xid, struct cifsT
*nbytes = le16_to_cpu(pSMBr->CountHigh);
*nbytes = (*nbytes) << 16;
*nbytes += le16_to_cpu(pSMBr->Count);
+
+ /*
+ * Mask off high 16 bits when bytes written as returned by the
+ * server is greater than bytes requested by the client. Some
+ * OS/2 servers are known to set incorrect CountHigh values.
+ */
+ if (*nbytes > count)
+ *nbytes &= 0xFFFF;
}
cifs_buf_release(pSMB);
@@ -1605,6 +1613,14 @@ CIFSSMBWrite2(const int xid, struct cifs
*nbytes = le16_to_cpu(pSMBr->CountHigh);
*nbytes = (*nbytes) << 16;
*nbytes += le16_to_cpu(pSMBr->Count);
+
+ /*
+ * Mask off high 16 bits when bytes written as returned by the
+ * server is greater than bytes requested by the client. OS/2
+ * servers are known to set incorrect CountHigh values.
+ */
+ if (*nbytes > count)
+ *nbytes &= 0xFFFF;
}
/* cifs_small_buf_release(pSMB); */ /* Freed earlier now in SendReceive2 */
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Pallipadi, Venkatesh <[email protected]>
commit 8da854cb02156c90028233ae1e85ce46a1d3f82c upstream.
On Wed, Feb 24, 2010 at 03:37:04PM -0800, Justin Piszcz wrote:
> Hello,
>
> Again, on the Intel DP55KG board:
>
> # uname -a
> Linux host 2.6.33 #1 SMP Wed Feb 24 18:31:00 EST 2010 x86_64 GNU/Linux
>
> [ 1.237600] ------------[ cut here ]------------
> [ 1.237890] WARNING: at arch/x86/kernel/hpet.c:404 hpet_next_event+0x70/0x80()
> [ 1.238221] Hardware name:
> [ 1.238504] hpet: compare register read back failed.
> [ 1.238793] Modules linked in:
> [ 1.239315] Pid: 0, comm: swapper Not tainted 2.6.33 #1
> [ 1.239605] Call Trace:
> [ 1.239886] <IRQ> [<ffffffff81056c13>] ? warn_slowpath_common+0x73/0xb0
> [ 1.240409] [<ffffffff81079608>] ? tick_dev_program_event+0x38/0xc0
> [ 1.240699] [<ffffffff81056cb0>] ? warn_slowpath_fmt+0x40/0x50
> [ 1.240992] [<ffffffff81079608>] ? tick_dev_program_event+0x38/0xc0
> [ 1.241281] [<ffffffff81041ad0>] ? hpet_next_event+0x70/0x80
> [ 1.241573] [<ffffffff81079608>] ? tick_dev_program_event+0x38/0xc0
> [ 1.241859] [<ffffffff81078e32>] ? tick_handle_oneshot_broadcast+0xe2/0x100
> [ 1.246533] [<ffffffff8102a67a>] ? timer_interrupt+0x1a/0x30
> [ 1.246826] [<ffffffff81085499>] ? handle_IRQ_event+0x39/0xd0
> [ 1.247118] [<ffffffff81087368>] ? handle_edge_irq+0xb8/0x160
> [ 1.247407] [<ffffffff81029f55>] ? handle_irq+0x15/0x20
> [ 1.247689] [<ffffffff810294a2>] ? do_IRQ+0x62/0xe0
> [ 1.247976] [<ffffffff8146be53>] ? ret_from_intr+0x0/0xa
> [ 1.248262] <EOI> [<ffffffff8102f277>] ? mwait_idle+0x57/0x80
> [ 1.248796] [<ffffffff8102645c>] ? cpu_idle+0x5c/0xb0
> [ 1.249080] ---[ end trace db7f668fb6fef4e1 ]---
>
> Is this something Intel has to fix or is it a bug in the kernel?
This is a chipset erratum.
Thomas: You mentioned we can retain this check only for known-buggy and
hpet debug kind of options. But here is the simple workaround patch for
this particular erratum.
Some chipsets have a erratum due to which read immediately following a
write of HPET comparator returns old comparator value instead of most
recently written value.
Erratum 15 in
"Intel I/O Controller Hub 9 (ICH9) Family Specification Update"
(http://www.intel.com/assets/pdf/specupdate/316973.pdf)
Workaround for the errata is to read the comparator twice if the first
one fails.
Signed-off-by: Venkatesh Pallipadi <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Cc: Venkatesh Pallipadi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/hpet.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -399,9 +399,15 @@ static int hpet_next_event(unsigned long
* then we might have a real hardware problem. We can not do
* much about it here, but at least alert the user/admin with
* a prominent warning.
+ * An erratum on some chipsets (ICH9,..), results in comparator read
+ * immediately following a write returning old value. Workaround
+ * for this is to read this value second time, when first
+ * read returns old value.
*/
- WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt,
+ if (unlikely((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt)) {
+ WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt,
KERN_WARNING "hpet: compare register read back failed.\n");
+ }
return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: [email protected] <[email protected]>
commit 4f1deba435ef75380c1d06fda860c7a15ea16fdf upstream.
Signed-off-by: Joseph Chan <[email protected]>
Signed-off-by: Jeff Garzik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/pata_via.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -697,6 +697,7 @@ static const struct pci_device_id via[]
{ PCI_VDEVICE(VIA, 0x3164), },
{ PCI_VDEVICE(VIA, 0x5324), },
{ PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE },
+ { PCI_VDEVICE(VIA, 0x9001), VIA_IDFLAG_SINGLE },
{ },
};
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: David Härdeman <[email protected]>
commit 530cd330dc3865e3107304a6e84fdc332aa72f7d upstream.
DECLARE_KFIFO creates a union with a struct kfifo and a buffer array with
size [size + sizeof(struct kfifo)].
INIT_KFIFO then sets the buffer pointer in struct kfifo to point to the
beginning of the buffer array which means that the first call to kfifo_in
will overwrite members of the struct kfifo.
Signed-off-by: David Härdeman <[email protected]>
Acked-by: Stefani Seibold <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
index ece0b1c..e117b1a 100644
--- a/include/linux/kfifo.h
+++ b/include/linux/kfifo.h
@@ -86,7 +86,8 @@ union { \
*/
#define INIT_KFIFO(name) \
name = __kfifo_initializer(sizeof(name##kfifo_buffer) - \
- sizeof(struct kfifo), name##kfifo_buffer)
+ sizeof(struct kfifo), \
+ name##kfifo_buffer + sizeof(struct kfifo))
/**
* DEFINE_KFIFO - macro to define and initialize a kfifo
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jiri Kosina <[email protected]>
commit d8e4ebf8b603bdcd091540e6b5bddf0dec10d516 upstream.
Fix oops caused by dereferencing field->hidinput in cases where
the device hasn't been claimed by hid-input.
Reported-by: Andreas Demmer <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/hid-gyration.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/hid/hid-gyration.c
+++ b/drivers/hid/hid-gyration.c
@@ -53,10 +53,13 @@ static int gyration_input_mapping(struct
static int gyration_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
- struct input_dev *input = field->hidinput->input;
+
+ if (!(hdev->claimed & HID_CLAIMED_INPUT) || !field->hidinput)
+ return 0;
if ((usage->hid & HID_USAGE_PAGE) == HID_UP_GENDESK &&
(usage->hid & 0xff) == 0x82) {
+ struct input_dev *input = field->hidinput->input;
input_event(input, usage->type, usage->code, 1);
input_sync(input);
input_event(input, usage->type, usage->code, 0);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Seth Heasley <[email protected]>
commit 4c7d849204341dea19be941a3c1eb4bdffac9cc4 upstream.
This patch adds the Intel Cougar Point PCH LPC Controller DeviceIDs for iTCO Watchdog.
Signed-off-by: Seth Heasley <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/watchdog/iTCO_wdt.c | 99 +++++++++++++++++++++++++++++++++++++++++---
1 file changed, 93 insertions(+), 6 deletions(-)
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -115,8 +115,37 @@ enum iTCO_chipsets {
TCO_3420, /* 3420 */
TCO_3450, /* 3450 */
TCO_EP80579, /* EP80579 */
- TCO_CPTD, /* CPT Desktop */
- TCO_CPTM, /* CPT Mobile */
+ TCO_CPT1, /* Cougar Point */
+ TCO_CPT2, /* Cougar Point Desktop */
+ TCO_CPT3, /* Cougar Point Mobile */
+ TCO_CPT4, /* Cougar Point */
+ TCO_CPT5, /* Cougar Point */
+ TCO_CPT6, /* Cougar Point */
+ TCO_CPT7, /* Cougar Point */
+ TCO_CPT8, /* Cougar Point */
+ TCO_CPT9, /* Cougar Point */
+ TCO_CPT10, /* Cougar Point */
+ TCO_CPT11, /* Cougar Point */
+ TCO_CPT12, /* Cougar Point */
+ TCO_CPT13, /* Cougar Point */
+ TCO_CPT14, /* Cougar Point */
+ TCO_CPT15, /* Cougar Point */
+ TCO_CPT16, /* Cougar Point */
+ TCO_CPT17, /* Cougar Point */
+ TCO_CPT18, /* Cougar Point */
+ TCO_CPT19, /* Cougar Point */
+ TCO_CPT20, /* Cougar Point */
+ TCO_CPT21, /* Cougar Point */
+ TCO_CPT22, /* Cougar Point */
+ TCO_CPT23, /* Cougar Point */
+ TCO_CPT24, /* Cougar Point */
+ TCO_CPT25, /* Cougar Point */
+ TCO_CPT26, /* Cougar Point */
+ TCO_CPT27, /* Cougar Point */
+ TCO_CPT28, /* Cougar Point */
+ TCO_CPT29, /* Cougar Point */
+ TCO_CPT30, /* Cougar Point */
+ TCO_CPT31, /* Cougar Point */
};
static struct {
@@ -173,8 +202,37 @@ static struct {
{"3420", 2},
{"3450", 2},
{"EP80579", 2},
- {"CPT Desktop", 2},
- {"CPT Mobile", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
{NULL, 0}
};
@@ -259,8 +317,37 @@ static struct pci_device_id iTCO_wdt_pci
{ ITCO_PCI_DEVICE(0x3b14, TCO_3420)},
{ ITCO_PCI_DEVICE(0x3b16, TCO_3450)},
{ ITCO_PCI_DEVICE(0x5031, TCO_EP80579)},
- { ITCO_PCI_DEVICE(0x1c42, TCO_CPTD)},
- { ITCO_PCI_DEVICE(0x1c43, TCO_CPTM)},
+ { ITCO_PCI_DEVICE(0x1c41, TCO_CPT1)},
+ { ITCO_PCI_DEVICE(0x1c42, TCO_CPT2)},
+ { ITCO_PCI_DEVICE(0x1c43, TCO_CPT3)},
+ { ITCO_PCI_DEVICE(0x1c44, TCO_CPT4)},
+ { ITCO_PCI_DEVICE(0x1c45, TCO_CPT5)},
+ { ITCO_PCI_DEVICE(0x1c46, TCO_CPT6)},
+ { ITCO_PCI_DEVICE(0x1c47, TCO_CPT7)},
+ { ITCO_PCI_DEVICE(0x1c48, TCO_CPT8)},
+ { ITCO_PCI_DEVICE(0x1c49, TCO_CPT9)},
+ { ITCO_PCI_DEVICE(0x1c4a, TCO_CPT10)},
+ { ITCO_PCI_DEVICE(0x1c4b, TCO_CPT11)},
+ { ITCO_PCI_DEVICE(0x1c4c, TCO_CPT12)},
+ { ITCO_PCI_DEVICE(0x1c4d, TCO_CPT13)},
+ { ITCO_PCI_DEVICE(0x1c4e, TCO_CPT14)},
+ { ITCO_PCI_DEVICE(0x1c4f, TCO_CPT15)},
+ { ITCO_PCI_DEVICE(0x1c50, TCO_CPT16)},
+ { ITCO_PCI_DEVICE(0x1c51, TCO_CPT17)},
+ { ITCO_PCI_DEVICE(0x1c52, TCO_CPT18)},
+ { ITCO_PCI_DEVICE(0x1c53, TCO_CPT19)},
+ { ITCO_PCI_DEVICE(0x1c54, TCO_CPT20)},
+ { ITCO_PCI_DEVICE(0x1c55, TCO_CPT21)},
+ { ITCO_PCI_DEVICE(0x1c56, TCO_CPT22)},
+ { ITCO_PCI_DEVICE(0x1c57, TCO_CPT23)},
+ { ITCO_PCI_DEVICE(0x1c58, TCO_CPT24)},
+ { ITCO_PCI_DEVICE(0x1c59, TCO_CPT25)},
+ { ITCO_PCI_DEVICE(0x1c5a, TCO_CPT26)},
+ { ITCO_PCI_DEVICE(0x1c5b, TCO_CPT27)},
+ { ITCO_PCI_DEVICE(0x1c5c, TCO_CPT28)},
+ { ITCO_PCI_DEVICE(0x1c5d, TCO_CPT29)},
+ { ITCO_PCI_DEVICE(0x1c5e, TCO_CPT30)},
+ { ITCO_PCI_DEVICE(0x1c5f, TCO_CPT31)},
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: David S. Miller <[email protected]>
[ Upstream commit bdd32ce95f79fb5cc964cd789d7ae4500bba7c6f ]
These just represent the secondary and further heads attached to the
card, and they have different sets of PCI bar registers to map.
So don't try to drive them in the main driver.
Reported-by: Frans van Berckel <[email protected]>
Tested-by: Frans van Berckel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/sunxvr500.c | 24 +++++++++++++++++-------
1 file changed, 17 insertions(+), 7 deletions(-)
--- a/drivers/video/sunxvr500.c
+++ b/drivers/video/sunxvr500.c
@@ -242,11 +242,27 @@ static int __devinit e3d_set_fbinfo(stru
static int __devinit e3d_pci_register(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
+ struct device_node *of_node;
+ const char *device_type;
struct fb_info *info;
struct e3d_info *ep;
unsigned int line_length;
int err;
+ of_node = pci_device_to_OF_node(pdev);
+ if (!of_node) {
+ printk(KERN_ERR "e3d: Cannot find OF node of %s\n",
+ pci_name(pdev));
+ return -ENODEV;
+ }
+
+ device_type = of_get_property(of_node, "device_type", NULL);
+ if (!device_type) {
+ printk(KERN_INFO "e3d: Ignoring secondary output device "
+ "at %s\n", pci_name(pdev));
+ return -ENODEV;
+ }
+
err = pci_enable_device(pdev);
if (err < 0) {
printk(KERN_ERR "e3d: Cannot enable PCI device %s\n",
@@ -265,13 +281,7 @@ static int __devinit e3d_pci_register(st
ep->info = info;
ep->pdev = pdev;
spin_lock_init(&ep->lock);
- ep->of_node = pci_device_to_OF_node(pdev);
- if (!ep->of_node) {
- printk(KERN_ERR "e3d: Cannot find OF node of %s\n",
- pci_name(pdev));
- err = -ENODEV;
- goto err_release_fb;
- }
+ ep->of_node = of_node;
/* Read the PCI base register of the frame buffer, which we
* need in order to interpret the RAMDAC_VID_*FB* values in
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Oleg Nesterov <[email protected]>
commit 6da8d866d0d39e9509ff826660f6a86a6757c966 upstream.
release_one_tty(tty) can be called when tty still has a reference
to pgrp/session. In this case we leak the pid.
Signed-off-by: Oleg Nesterov <[email protected]>
Reported-by: Catalin Marinas <[email protected]>
Reported-and-tested-by: Tetsuo Handa <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Acked-by: Eric W. Biederman <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tty_io.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1423,6 +1423,8 @@ static void release_one_tty(struct work_
list_del_init(&tty->tty_files);
file_list_unlock();
+ put_pid(tty->pgrp);
+ put_pid(tty->session);
free_tty_struct(tty);
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Wu Fengguang <[email protected]>
commit 70655c06bd3f25111312d63985888112aed15ac5 upstream.
btrfs relocate_file_extent_cluster() calls us with NULL filp:
[ 4005.426805] BUG: unable to handle kernel NULL pointer dereference at 00000021
[ 4005.426818] IP: [<c109a130>] page_cache_sync_readahead+0x18/0x3e
Signed-off-by: Wu Fengguang <[email protected]>
Cc: Yan Zheng <[email protected]>
Reported-by: Kirill A. Shutemov <[email protected]>
Tested-by: Kirill A. Shutemov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/readahead.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -502,7 +502,7 @@ void page_cache_sync_readahead(struct ad
return;
/* be dumb */
- if (filp->f_mode & FMODE_RANDOM) {
+ if (filp && (filp->f_mode & FMODE_RANDOM)) {
force_page_cache_readahead(mapping, filp, offset, req_size);
return;
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jeff Mahoney <[email protected]>
commit b7b7fa43103a9fb30dbcc60cbd5161fdfc25f904 upstream.
Commit 8ebc423238341b52912c7295b045a32477b33f09 (reiserfs: kill-the-BKL)
introduced a bug in the mount failure case.
The error label releases the lock before calling journal_release_error,
but it requires that the lock be held. do_journal_release unlocks and
retakes it. When it releases it without it held, we trigger a BUG().
The error_alloc label skips the unlock since the lock isn't held yet
but none of the other conditions that are clean up exist yet either.
This patch returns immediately after the kzalloc failure and moves
the reiserfs_write_unlock after the journal_release_error call.
This was reported in https://bugzilla.novell.com/show_bug.cgi?id=591807
Reported-by: Thomas Siedentopf <[email protected]>
Signed-off-by: Jeff Mahoney <[email protected]>
Cc: Thomas Siedentopf <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/reiserfs/super.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -1619,10 +1619,8 @@ static int reiserfs_fill_super(struct su
save_mount_options(s, data);
sbi = kzalloc(sizeof(struct reiserfs_sb_info), GFP_KERNEL);
- if (!sbi) {
- errval = -ENOMEM;
- goto error_alloc;
- }
+ if (!sbi)
+ return -ENOMEM;
s->s_fs_info = sbi;
/* Set default values for options: non-aggressive tails, RO on errors */
REISERFS_SB(s)->s_mount_opt |= (1 << REISERFS_SMALLTAIL);
@@ -1879,12 +1877,12 @@ static int reiserfs_fill_super(struct su
return (0);
error:
- reiserfs_write_unlock(s);
-error_alloc:
if (jinit_done) { /* kill the commit thread, free journal ram */
journal_release_error(NULL, s);
}
+ reiserfs_write_unlock(s);
+
reiserfs_free_bitmap_cache(s);
if (SB_BUFFER_WITH_SB(s))
brelse(SB_BUFFER_WITH_SB(s));
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Takashi Iwai <[email protected]>
commit 3815595e78d2baae6feb866e737f92d8ef48b337 upstream.
The device needs MSI disablement. Added to the quirk list.
Reported-by: Harald Dunkel <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_intel.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2358,6 +2358,7 @@ static struct snd_pci_quirk msi_black_li
SND_PCI_QUIRK(0x1043, 0x81f6, "ASUS", 0), /* nvidia */
SND_PCI_QUIRK(0x1043, 0x822d, "ASUS", 0), /* Athlon64 X2 + nvidia MCP55 */
SND_PCI_QUIRK(0x1849, 0x0888, "ASRock", 0), /* Athlon64 X2 + nvidia */
+ SND_PCI_QUIRK(0xa0a0, 0x0575, "Aopen MZ915-M", 0), /* ICH6 */
{}
};
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Johannes Berg <[email protected]>
commit 7236fe29fd72d17074574ba312e7f1bb9d10abaa upstream.
"mac80211: fix skb buffering issue" still left a race
between enabling the hardware queues and the virtual
interface queues. In hindsight it's totally obvious
that enabling the netdev queues for a hardware queue
when the hardware queue is enabled is wrong, because
it could well possible that we can fill the hw queue
with packets we already have pending. Thus, we must
only enable the netdev queues once all the pending
packets have been processed and sent off to the device.
In testing, I haven't been able to trigger this race
condition, but it's clearly there, possibly only when
aggregation is being enabled.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/tx.c | 6 ++++++
net/mac80211/util.c | 12 ++++++------
2 files changed, 12 insertions(+), 6 deletions(-)
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1945,6 +1945,7 @@ static bool ieee80211_tx_pending_skb(str
void ieee80211_tx_pending(unsigned long data)
{
struct ieee80211_local *local = (struct ieee80211_local *)data;
+ struct ieee80211_sub_if_data *sdata;
unsigned long flags;
int i;
bool txok;
@@ -1983,6 +1984,11 @@ void ieee80211_tx_pending(unsigned long
if (!txok)
break;
}
+
+ if (skb_queue_empty(&local->pending[i]))
+ list_for_each_entry_rcu(sdata, &local->interfaces, list)
+ netif_tx_wake_queue(
+ netdev_get_tx_queue(sdata->dev, i));
}
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -280,13 +280,13 @@ static void __ieee80211_wake_queue(struc
/* someone still has this queue stopped */
return;
- if (!skb_queue_empty(&local->pending[queue]))
+ if (skb_queue_empty(&local->pending[queue])) {
+ rcu_read_lock();
+ list_for_each_entry_rcu(sdata, &local->interfaces, list)
+ netif_tx_wake_queue(netdev_get_tx_queue(sdata->dev, queue));
+ rcu_read_unlock();
+ } else
tasklet_schedule(&local->tx_pending_tasklet);
-
- rcu_read_lock();
- list_for_each_entry_rcu(sdata, &local->interfaces, list)
- netif_tx_wake_queue(netdev_get_tx_queue(sdata->dev, queue));
- rcu_read_unlock();
}
void ieee80211_wake_queue_by_reason(struct ieee80211_hw *hw, int queue,
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Porsch, Marco <[email protected]>
commit 533866b12cce484994163b1e201778cbac4c04c5 upstream.
1st) a PREQ should only be processed, if it has the same SN and better
metric (instead of better or equal).
2nd) next_hop[ETH_ALEN] now actually used to buffer
mpath->next_hop->sta.addr for use out of lock.
Signed-off-by: Marco Porsch <[email protected]>
Acked-by: Javier Cardona <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/mesh_hwmp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -391,7 +391,7 @@ static u32 hwmp_route_info_get(struct ie
if (SN_GT(mpath->sn, orig_sn) ||
(mpath->sn == orig_sn &&
action == MPATH_PREQ &&
- new_metric > mpath->metric)) {
+ new_metric >= mpath->metric)) {
process = false;
fresh_info = false;
}
@@ -611,7 +611,7 @@ static void hwmp_prep_frame_process(stru
mesh_path_sel_frame_tx(MPATH_PREP, flags, orig_addr,
cpu_to_le32(orig_sn), 0, target_addr,
- cpu_to_le32(target_sn), mpath->next_hop->sta.addr, hopcount,
+ cpu_to_le32(target_sn), next_hop, hopcount,
ttl, cpu_to_le32(lifetime), cpu_to_le32(metric),
0, sdata);
rcu_read_unlock();
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Anton Blanchard <[email protected]>
commit 84fba5ec91f11c0efb27d0ed6098f7447491f0df upstream.
taskset on 2.6.34-rc3 fails on one of my ppc64 test boxes with
the following error:
sched_getaffinity(0, 16, 0x10029650030) = -1 EINVAL (Invalid argument)
This box has 128 threads and 16 bytes is enough to cover it.
Commit cd3d8031eb4311e516329aee03c79a08333141f1 (sched:
sched_getaffinity(): Allow less than NR_CPUS length) is
comparing this 16 bytes agains nr_cpu_ids.
Fix it by comparing nr_cpu_ids to the number of bits in the
cpumask we pass in.
Signed-off-by: Anton Blanchard <[email protected]>
Reviewed-by: KOSAKI Motohiro <[email protected]>
Cc: Sharyathi Nagesh <[email protected]>
Cc: Ulrich Drepper <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Jack Steiner <[email protected]>
Cc: Russ Anderson <[email protected]>
Cc: Mike Travis <[email protected]>
LKML-Reference: <20100406070218.GM5594@kryten>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -6717,7 +6717,7 @@ SYSCALL_DEFINE3(sched_getaffinity, pid_t
int ret;
cpumask_var_t mask;
- if (len < nr_cpu_ids)
+ if ((len * BITS_PER_BYTE) < nr_cpu_ids)
return -EINVAL;
if (len & (sizeof(unsigned long)-1))
return -EINVAL;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Valentin Longchamp <[email protected]>
commit 2d20c72c021d96f8b9230396c8e3782f204214ec upstream.
An int urb is constructed but we fill it in with a bulk pipe type.
Commit f661c6f8c67bd55e93348f160d590ff9edf08904 implemented a pipe type
check when CONFIG_USB_DEBUG is enabled. The check failed for all the ar9170
usb transfers and the driver could not configure the wifi dongle.
This went unnoticed until now because most people don't have
CONFIG_USB_DEBUG enabled.
Signed-off-by: Valentin Longchamp <[email protected]>
Acked-by: Christian Lamparter <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ar9170/usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -414,7 +414,7 @@ static int ar9170_usb_exec_cmd(struct ar
spin_unlock_irqrestore(&aru->common.cmdlock, flags);
usb_fill_int_urb(urb, aru->udev,
- usb_sndbulkpipe(aru->udev, AR9170_EP_CMD),
+ usb_sndintpipe(aru->udev, AR9170_EP_CMD),
aru->common.cmdbuf, plen + 4,
ar9170_usb_tx_urb_complete, NULL, 1);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Matt Fleming <[email protected]>
commit 4bea3418c737891894b9d3d3e9f8bbd67d66fa38 upstream.
For the boot, enable_mmu() is called from setup_arch() but we don't call
setup_arch() for any of the other cpus. So turn on the non-boot cpu's
mmu inside of start_secondary().
I noticed this bug on an SMP board when trying to map I/O memory
(smsc911x registers) into the kernel address space. Since the Address
Translation bit in MMUCR wasn't set, accessing the virtual address where
the smsc911x registers were supposedly mapped actually performed a
physical address access.
Signed-off-by: Matt Fleming <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/sh/kernel/smp.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -69,6 +69,7 @@ asmlinkage void __cpuinit start_secondar
unsigned int cpu;
struct mm_struct *mm = &init_mm;
+ enable_mmu();
atomic_inc(&mm->mm_count);
atomic_inc(&mm->mm_users);
current->active_mm = mm;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Rabin Vincent <[email protected]>
commit d4d9959c099751158c5cf14813fe378e206339c6 upstream.
98e12b5a6e05413 ("ARM: Fix decompressor's kernel size estimation for
ROM=y") broke the Thumb-2 decompressor because it added an entry in the
LC0 table but didn't adjust the offset the Thumb-2 code uses to load the
SP from that table. Fix it.
Signed-off-by: Rabin Vincent <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/compressed/head.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -172,7 +172,7 @@ not_angel:
adr r0, LC0
ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip} )
- THUMB( ldr sp, [r0, #28] )
+ THUMB( ldr sp, [r0, #32] )
subs r0, r0, r1 @ calculate the delta offset
@ if delta is zero, we are
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Dan Carpenter <[email protected]>
commit 8e1a53c615e8efe0fac670f2973da64758748a8a upstream.
IWL_RATE_COUNT is 13 and IWL_RATE_COUNT_LEGACY is 12.
IWL_RATE_COUNT_LEGACY is the right one here because iwl3945_rates
doesn't support 60M and also that's how "rates" is defined in
iwlcore_init_geos() from drivers/net/wireless/iwlwifi/iwl-core.c.
rates = kzalloc((sizeof(struct ieee80211_rate) * IWL_RATE_COUNT_LEGACY),
GFP_KERNEL);
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Zhu Yi <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1926,7 +1926,7 @@ static void iwl3945_init_hw_rates(struct
{
int i;
- for (i = 0; i < IWL_RATE_COUNT; i++) {
+ for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
rates[i].bitrate = iwl3945_rates[i].ieee * 5;
rates[i].hw_value = i; /* Rate scaling will work on indexes */
rates[i].hw_value_short = i;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Thomas Mingarelli <[email protected]>
commit 8ba42bd88c6982fe224b09c33151c797b0fdf1a5 upstream.
[Novell Bug 581103] HP Watchdog driver has arbitrary (wrong) timeout limits.
Fix the lower timeout limit to a more appropriate value.
Signed-off-by: Thomas Mingarelli <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/watchdog/hpwdt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -443,7 +443,7 @@ static void hpwdt_ping(void)
static int hpwdt_change_timer(int new_margin)
{
/* Arbitrary, can't find the card's limits */
- if (new_margin < 30 || new_margin > 600) {
+ if (new_margin < 5 || new_margin > 600) {
printk(KERN_WARNING
"hpwdt: New value passed in is invalid: %d seconds.\n",
new_margin);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Chris Wright <[email protected]>
commit 75f66533bc883f761a7adcab3281fe3323efbc90 upstream.
Hit another kdump problem as reported by Neil Horman. When initializaing
the IOMMU, we attach devices to their domains before the IOMMU is
fully (re)initialized. Attaching a device will issue some important
invalidations. In the context of the newly kexec'd kdump kernel, the
IOMMU may have stale cached data from the original kernel. Because we
do the attach too early, the invalidation commands are placed in the new
command buffer before the IOMMU is updated w/ that buffer. This leaves
the stale entries in the kdump context and can renders device unusable.
Simply enable the IOMMU before we do the attach.
Cc: Neil Horman <[email protected]>
Cc: Vivek Goyal <[email protected]>
Signed-off-by: Chris Wright <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/amd_iommu_init.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -1288,6 +1288,8 @@ static int __init amd_iommu_init(void)
if (ret)
goto free;
+ enable_iommus();
+
if (iommu_pass_through)
ret = amd_iommu_init_passthrough();
else
@@ -1300,8 +1302,6 @@ static int __init amd_iommu_init(void)
amd_iommu_init_notifier();
- enable_iommus();
-
if (iommu_pass_through)
goto out;
@@ -1315,6 +1315,7 @@ out:
return ret;
free:
+ disable_iommus();
amd_iommu_uninit_devices();
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Wey-Yi Guy <[email protected]>
commit be6b38bcb175613f239e0b302607db346472c6b6 upstream.
Forget one hunk in 4965 during "iwlwifi: error checking for number of tfds
in queue" patch.
Reported-by: Shanyu Zhao <[email protected]>
Signed-off-by: Wey-Yi Guy <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-4965.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2034,16 +2034,14 @@ static void iwl4965_rx_reply_tx(struct i
tx_resp->failure_frame);
freed = iwl_tx_queue_reclaim(priv, txq_id, index);
- if (qc && likely(sta_id != IWL_INVALID_STATION))
- priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+ iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
if (priv->mac80211_registered &&
(iwl_queue_space(&txq->q) > txq->q.low_mark))
iwl_wake_queue(priv, txq_id);
}
- if (qc && likely(sta_id != IWL_INVALID_STATION))
- iwl_txq_check_empty(priv, sta_id, tid, txq_id);
+ iwl_txq_check_empty(priv, sta_id, tid, txq_id);
if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
IWL_ERR(priv, "TODO: Implement Tx ABORT REQUIRED!!!\n");
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Reinette Chatre <[email protected]>
commit f6c8f1523a2de3b84340e45913cbcee8bee74570 upstream.
Commit "cfg80211: convert bools into flags" mistakenly modified iwlwifi's
regulatory settings instead of just converting it. Fix this.
This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2172
Signed-off-by: Reinette Chatre <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +-
drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2461,7 +2461,7 @@ static int iwl_setup_mac(struct iwl_priv
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
- hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY |
+ hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
WIPHY_FLAG_DISABLE_BEACON_HINTS;
/*
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3903,7 +3903,7 @@ static int iwl3945_setup_mac(struct iwl_
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
- hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY |
+ hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
WIPHY_FLAG_DISABLE_BEACON_HINTS;
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Wey-Yi Guy <[email protected]>
commit 74e2bd1fa3ae9695af566ad5a7a288898787b909 upstream.
When there is a need to restart/reconfig hw, tear down all the
aggregation queues and let the mac80211 and driver get in-sync to have
the opportunity to re-establish the aggregation queues again.
Need to wait until driver re-establish all the station information before tear
down the aggregation queues, driver(at least iwlwifi driver) will reject the
stop aggregation queue request if station is not ready. But also need to make
sure the aggregation queues are tear down before waking up the queues, so
mac80211 will not sending frames with aggregation bit set.
Signed-off-by: Wey-Yi Guy <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/util.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1145,6 +1145,14 @@ int ieee80211_reconfig(struct ieee80211_
}
}
+ rcu_read_lock();
+ if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
+ list_for_each_entry_rcu(sta, &local->sta_list, list) {
+ ieee80211_sta_tear_down_BA_sessions(sta);
+ }
+ }
+ rcu_read_unlock();
+
/* add back keys */
list_for_each_entry(sdata, &local->interfaces, list)
if (netif_running(sdata->dev))
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jason Wessel <[email protected]>
commit ab310b5edb8b601bcb02491ed6f7676da4fd1757 upstream.
It is required to call hw_breakpoint_init() on an attr before using it
in any other calls. This fixes the problem where kgdb will sometimes
fail to initialize on x86_64.
Signed-off-by: Jason Wessel <[email protected]>
Cc: Ingo Molnar <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/kgdb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -618,8 +618,8 @@ int kgdb_arch_init(void)
* portion of kgdb because this operation requires mutexs to
* complete.
*/
+ hw_breakpoint_init(&attr);
attr.bp_addr = (unsigned long)kgdb_arch_init;
- attr.type = PERF_TYPE_BREAKPOINT;
attr.bp_len = HW_BREAKPOINT_LEN_1;
attr.bp_type = HW_BREAKPOINT_W;
attr.disabled = 1;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Evan McClain <[email protected]>
commit 36bc5ee6a8d13333980fa54e97d3469d3d4cda98 upstream.
This adds the MacBook 1,1 2,1 3,1 4,1 and 4,2 to the DMI tables.
Signed-off-by: Evan McClain <[email protected]>
Signed-off-by: Richard Purdie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/backlight/mbp_nvidia_bl.c | 45 ++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
--- a/drivers/video/backlight/mbp_nvidia_bl.c
+++ b/drivers/video/backlight/mbp_nvidia_bl.c
@@ -139,6 +139,51 @@ static int mbp_dmi_match(const struct dm
static const struct dmi_system_id __initdata mbp_device_table[] = {
{
.callback = mbp_dmi_match,
+ .ident = "MacBook 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+ },
+ .driver_data = (void *)&intel_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBook 2,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"),
+ },
+ .driver_data = (void *)&intel_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBook 3,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook3,1"),
+ },
+ .driver_data = (void *)&intel_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBook 4,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook4,1"),
+ },
+ .driver_data = (void *)&intel_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBook 4,2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook4,2"),
+ },
+ .driver_data = (void *)&intel_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
.ident = "MacBookPro 3,1",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Christian Borntraeger <[email protected]>
commit 6af7eea2aee57b869f34eba0a94ef122fe90fbfd upstream.
commit 6a985c6194017de2c062916ad1cd00dee0302c40
([S390] s390: use change recording override for kernel mapping)
deactivated the change bit recording for the kernel mapping to
improve the performance. This works most of the time, but there
are cases (e.g. kernel runs in home space, futex atomic compare xcmg)
where we modify user memory with the kernel mapping instead of the
user mapping.
Instead of fixing these cases, this patch just deactivates change bit
override to avoid future problems with other kernel code that might
use the kernel mapping for user memory.
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/mm/vmem.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -70,12 +70,8 @@ static pte_t __ref *vmem_pte_alloc(void)
pte = alloc_bootmem(PTRS_PER_PTE * sizeof(pte_t));
if (!pte)
return NULL;
- if (MACHINE_HAS_HPAGE)
- clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY | _PAGE_CO,
- PTRS_PER_PTE * sizeof(pte_t));
- else
- clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY,
- PTRS_PER_PTE * sizeof(pte_t));
+ clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY,
+ PTRS_PER_PTE * sizeof(pte_t));
return pte;
}
@@ -116,8 +112,7 @@ static int vmem_add_mem(unsigned long st
if (MACHINE_HAS_HPAGE && !(address & ~HPAGE_MASK) &&
(address + HPAGE_SIZE <= start + size) &&
(address >= HPAGE_SIZE)) {
- pte_val(pte) |= _SEGMENT_ENTRY_LARGE |
- _SEGMENT_ENTRY_CO;
+ pte_val(pte) |= _SEGMENT_ENTRY_LARGE;
pmd_val(*pm_dir) = pte_val(pte);
address += HPAGE_SIZE - PAGE_SIZE;
continue;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Adam Jackson <[email protected]>
commit ba1163de2f74d624e7b0e530c4104c98ede0045a upstream.
Claims 1280x1024 preferred, physically 1600x1200
cf. http://bugzilla.redhat.com/530399
Signed-off-by: Adam Jackson <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_edid.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -85,6 +85,8 @@ static struct edid_quirk {
/* Envision Peripherals, Inc. EN-7100e */
{ "EPI", 59264, EDID_QUIRK_135_CLOCK_TOO_HIGH },
+ /* Envision EN2028 */
+ { "EPI", 8232, EDID_QUIRK_PREFER_LARGE_60 },
/* Funai Electronics PM36B */
{ "FCM", 13600, EDID_QUIRK_PREFER_LARGE_75 |
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Andrew Stubbs <[email protected]>
commit d5ab780305bb6d60a7b5a74f18cf84eb6ad153b1 upstream.
Ensure that the aux table is properly initialized, even when optional
features are missing. Without this, the FDPIC loader did not work.
Signed-off-by: Andrew Stubbs <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/sh/include/asm/elf.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/arch/sh/include/asm/elf.h
+++ b/arch/sh/include/asm/elf.h
@@ -211,7 +211,9 @@ extern void __kernel_vsyscall;
#define VSYSCALL_AUX_ENT \
if (vdso_enabled) \
- NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
+ NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \
+ else \
+ NEW_AUX_ENT(AT_IGNORE, 0);
#else
#define VSYSCALL_AUX_ENT
#endif /* CONFIG_VSYSCALL */
@@ -219,7 +221,7 @@ extern void __kernel_vsyscall;
#ifdef CONFIG_SH_FPU
#define FPU_AUX_ENT NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
#else
-#define FPU_AUX_ENT
+#define FPU_AUX_ENT NEW_AUX_ENT(AT_IGNORE, 0)
#endif
extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Michele Ballabio <[email protected]>
commit 4193d13b2c2b694aa59e629e6daf6269d7922f13 upstream.
This avoids a lockup at boot.
Signed-off-by: Michele Ballabio <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_intel.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2357,6 +2357,7 @@ static struct snd_pci_quirk msi_black_li
SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */
SND_PCI_QUIRK(0x1043, 0x81f6, "ASUS", 0), /* nvidia */
SND_PCI_QUIRK(0x1043, 0x822d, "ASUS", 0), /* Athlon64 X2 + nvidia MCP55 */
+ SND_PCI_QUIRK(0x1849, 0x0888, "ASRock", 0), /* Athlon64 X2 + nvidia */
{}
};
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Borislav Petkov <[email protected]>
commit cb19060abfdecac0d1eb2d2f0e7d6b7a3f8bc4f4 upstream.
Final stage linking can fail with
arch/x86/built-in.o: In function `store_cache_disable':
intel_cacheinfo.c:(.text+0xc509): undefined reference to `amd_get_nb_id'
arch/x86/built-in.o: In function `show_cache_disable':
intel_cacheinfo.c:(.text+0xc7d3): undefined reference to `amd_get_nb_id'
when CONFIG_CPU_SUP_AMD is not enabled because the amd_get_nb_id
helper is defined in AMD-specific code but also used in generic code
(intel_cacheinfo.c). Reorganize the L3 cache index disable code under
CONFIG_CPU_SUP_AMD since it is AMD-only anyway.
Signed-off-by: Borislav Petkov <[email protected]>
LKML-Reference: <20100218184210.GF20473@aftab>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/intel_cacheinfo.c | 186 +++++++++++++++++-----------------
1 file changed, 98 insertions(+), 88 deletions(-)
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -293,6 +293,13 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_
(ebx->split.ways_of_associativity + 1) - 1;
}
+struct _cache_attr {
+ struct attribute attr;
+ ssize_t (*show)(struct _cpuid4_info *, char *);
+ ssize_t (*store)(struct _cpuid4_info *, const char *, size_t count);
+};
+
+#ifdef CONFIG_CPU_SUP_AMD
static unsigned int __cpuinit amd_calc_l3_indices(void)
{
/*
@@ -303,7 +310,7 @@ static unsigned int __cpuinit amd_calc_l
int node = cpu_to_node(cpu);
struct pci_dev *dev = node_to_k8_nb_misc(node);
unsigned int sc0, sc1, sc2, sc3;
- u32 val;
+ u32 val = 0;
pci_read_config_dword(dev, 0x1C4, &val);
@@ -335,6 +342,94 @@ amd_check_l3_disable(int index, struct _
this_leaf->l3_indices = amd_calc_l3_indices();
}
+static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf,
+ unsigned int index)
+{
+ int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
+ int node = amd_get_nb_id(cpu);
+ struct pci_dev *dev = node_to_k8_nb_misc(node);
+ unsigned int reg = 0;
+
+ if (!this_leaf->can_disable)
+ return -EINVAL;
+
+ if (!dev)
+ return -EINVAL;
+
+ pci_read_config_dword(dev, 0x1BC + index * 4, ®);
+ return sprintf(buf, "0x%08x\n", reg);
+}
+
+#define SHOW_CACHE_DISABLE(index) \
+static ssize_t \
+show_cache_disable_##index(struct _cpuid4_info *this_leaf, char *buf) \
+{ \
+ return show_cache_disable(this_leaf, buf, index); \
+}
+SHOW_CACHE_DISABLE(0)
+SHOW_CACHE_DISABLE(1)
+
+static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf,
+ const char *buf, size_t count, unsigned int index)
+{
+ int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
+ int node = amd_get_nb_id(cpu);
+ struct pci_dev *dev = node_to_k8_nb_misc(node);
+ unsigned long val = 0;
+
+#define SUBCACHE_MASK (3UL << 20)
+#define SUBCACHE_INDEX 0xfff
+
+ if (!this_leaf->can_disable)
+ return -EINVAL;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (!dev)
+ return -EINVAL;
+
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ /* do not allow writes outside of allowed bits */
+ if ((val & ~(SUBCACHE_MASK | SUBCACHE_INDEX)) ||
+ ((val & SUBCACHE_INDEX) > this_leaf->l3_indices))
+ return -EINVAL;
+
+ val |= BIT(30);
+ pci_write_config_dword(dev, 0x1BC + index * 4, val);
+ /*
+ * We need to WBINVD on a core on the node containing the L3 cache which
+ * indices we disable therefore a simple wbinvd() is not sufficient.
+ */
+ wbinvd_on_cpu(cpu);
+ pci_write_config_dword(dev, 0x1BC + index * 4, val | BIT(31));
+ return count;
+}
+
+#define STORE_CACHE_DISABLE(index) \
+static ssize_t \
+store_cache_disable_##index(struct _cpuid4_info *this_leaf, \
+ const char *buf, size_t count) \
+{ \
+ return store_cache_disable(this_leaf, buf, count, index); \
+}
+STORE_CACHE_DISABLE(0)
+STORE_CACHE_DISABLE(1)
+
+static struct _cache_attr cache_disable_0 = __ATTR(cache_disable_0, 0644,
+ show_cache_disable_0, store_cache_disable_0);
+static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644,
+ show_cache_disable_1, store_cache_disable_1);
+
+#else /* CONFIG_CPU_SUP_AMD */
+static void __cpuinit
+amd_check_l3_disable(int index, struct _cpuid4_info_regs *this_leaf)
+{
+};
+#endif /* CONFIG_CPU_SUP_AMD */
+
static int
__cpuinit cpuid4_cache_lookup_regs(int index,
struct _cpuid4_info_regs *this_leaf)
@@ -740,88 +835,6 @@ static ssize_t show_type(struct _cpuid4_
#define to_object(k) container_of(k, struct _index_kobject, kobj)
#define to_attr(a) container_of(a, struct _cache_attr, attr)
-static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf,
- unsigned int index)
-{
- int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
- int node = amd_get_nb_id(cpu);
- struct pci_dev *dev = node_to_k8_nb_misc(node);
- unsigned int reg = 0;
-
- if (!this_leaf->can_disable)
- return -EINVAL;
-
- if (!dev)
- return -EINVAL;
-
- pci_read_config_dword(dev, 0x1BC + index * 4, ®);
- return sprintf(buf, "0x%08x\n", reg);
-}
-
-#define SHOW_CACHE_DISABLE(index) \
-static ssize_t \
-show_cache_disable_##index(struct _cpuid4_info *this_leaf, char *buf) \
-{ \
- return show_cache_disable(this_leaf, buf, index); \
-}
-SHOW_CACHE_DISABLE(0)
-SHOW_CACHE_DISABLE(1)
-
-static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf,
- const char *buf, size_t count, unsigned int index)
-{
- int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
- int node = amd_get_nb_id(cpu);
- struct pci_dev *dev = node_to_k8_nb_misc(node);
- unsigned long val = 0;
-
-#define SUBCACHE_MASK (3UL << 20)
-#define SUBCACHE_INDEX 0xfff
-
- if (!this_leaf->can_disable)
- return -EINVAL;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (!dev)
- return -EINVAL;
-
- if (strict_strtoul(buf, 10, &val) < 0)
- return -EINVAL;
-
- /* do not allow writes outside of allowed bits */
- if ((val & ~(SUBCACHE_MASK | SUBCACHE_INDEX)) ||
- ((val & SUBCACHE_INDEX) > this_leaf->l3_indices))
- return -EINVAL;
-
- val |= BIT(30);
- pci_write_config_dword(dev, 0x1BC + index * 4, val);
- /*
- * We need to WBINVD on a core on the node containing the L3 cache which
- * indices we disable therefore a simple wbinvd() is not sufficient.
- */
- wbinvd_on_cpu(cpu);
- pci_write_config_dword(dev, 0x1BC + index * 4, val | BIT(31));
- return count;
-}
-
-#define STORE_CACHE_DISABLE(index) \
-static ssize_t \
-store_cache_disable_##index(struct _cpuid4_info *this_leaf, \
- const char *buf, size_t count) \
-{ \
- return store_cache_disable(this_leaf, buf, count, index); \
-}
-STORE_CACHE_DISABLE(0)
-STORE_CACHE_DISABLE(1)
-
-struct _cache_attr {
- struct attribute attr;
- ssize_t (*show)(struct _cpuid4_info *, char *);
- ssize_t (*store)(struct _cpuid4_info *, const char *, size_t count);
-};
-
#define define_one_ro(_name) \
static struct _cache_attr _name = \
__ATTR(_name, 0444, show_##_name, NULL)
@@ -836,11 +849,6 @@ define_one_ro(size);
define_one_ro(shared_cpu_map);
define_one_ro(shared_cpu_list);
-static struct _cache_attr cache_disable_0 = __ATTR(cache_disable_0, 0644,
- show_cache_disable_0, store_cache_disable_0);
-static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644,
- show_cache_disable_1, store_cache_disable_1);
-
#define DEFAULT_SYSFS_CACHE_ATTRS \
&type.attr, \
&level.attr, \
@@ -859,8 +867,10 @@ static struct attribute *default_attrs[]
static struct attribute *default_l3_attrs[] = {
DEFAULT_SYSFS_CACHE_ATTRS,
+#ifdef CONFIG_CPU_SUP_AMD
&cache_disable_0.attr,
&cache_disable_1.attr,
+#endif
NULL
};
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Ben Skeggs <[email protected]>
commit 44fef22416886a04d432043f741a6faf2c6ffefd upstream.
Signed-off-by: Ben Skeggs <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_edid.c | 9 ---------
1 file changed, 9 deletions(-)
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -707,15 +707,6 @@ static struct drm_display_mode *drm_mode
mode->vsync_end = mode->vsync_start + vsync_pulse_width;
mode->vtotal = mode->vdisplay + vblank;
- /* perform the basic check for the detailed timing */
- if (mode->hsync_end > mode->htotal ||
- mode->vsync_end > mode->vtotal) {
- drm_mode_destroy(dev, mode);
- DRM_DEBUG_KMS("Incorrect detailed timing. "
- "Sync is beyond the blank.\n");
- return NULL;
- }
-
/* Some EDIDs have bogus h/vtotal values */
if (mode->hsync_end > mode->htotal)
mode->htotal = mode->hsync_end + 1;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Chris Wilson <[email protected]>
commit da58405860b992d2bb21ebae5d685fe3204dd3f0 upstream.
Replace a BUG_ON with an error code in the event that the inode mapping
changes between calls to drm_open. This may happen for instance if udev
is loaded subsequent to the original opening of the device:
[ 644.291870] kernel BUG at drivers/gpu/drm/drm_fops.c:146!
[ 644.291876] invalid opcode: 0000 [#1] SMP
[ 644.291882] last sysfs file: /sys/kernel/uevent_seqnum
[ 644.291888]
[ 644.291895] Pid: 7276, comm: lt-cairo-test-s Not tainted 2.6.34-rc1 #2 N150/N210/N220 /N150/N210/N220
[ 644.291903] EIP: 0060:[<c11c70e3>] EFLAGS: 00210283 CPU: 0
[ 644.291912] EIP is at drm_open+0x4b1/0x4e2
[ 644.291918] EAX: f72d8d18 EBX: f790a400 ECX: f73176b8 EDX: 00000000
[ 644.291923] ESI: f790a414 EDI: f790a414 EBP: f647ae20 ESP: f647adfc
[ 644.291929] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 644.291937] Process lt-cairo-test-s (pid: 7276, ti=f647a000 task=f73f5c80 task.ti=f647a000)
[ 644.291941] Stack:
[ 644.291945] 00000000 f7bb7400 00000080 f6451100 f73176b8 f6479214 f6451100 f73176b8
[ 644.291957] <0> c1297ce0 f647ae34 c11c6c04 f73176b8 f7949800 00000000 f647ae54 c1080ac5
[ 644.291969] <0> f7949800 f6451100 00000000 f6451100 f73176b8 f6452780 f647ae70 c107d1e6
[ 644.291982] Call Trace:
[ 644.291991] [<c11c6c04>] ? drm_stub_open+0x8a/0xb8
[ 644.292000] [<c1080ac5>] ? chrdev_open+0xef/0x106
[ 644.292008] [<c107d1e6>] ? __dentry_open+0xd4/0x1a6
[ 644.292015] [<c107d35b>] ? nameidata_to_filp+0x31/0x45
[ 644.292022] [<c10809d6>] ? chrdev_open+0x0/0x106
[ 644.292030] [<c10864e2>] ? do_last+0x346/0x423
[ 644.292037] [<c108789f>] ? do_filp_open+0x190/0x415
[ 644.292046] [<c1071eb5>] ? handle_mm_fault+0x214/0x710
[ 644.292053] [<c107d008>] ? do_sys_open+0x4d/0xe9
[ 644.292061] [<c1016462>] ? do_page_fault+0x211/0x23f
[ 644.292068] [<c107d0f0>] ? sys_open+0x23/0x2b
[ 644.292075] [<c1002650>] ? sysenter_do_call+0x12/0x26
[ 644.292079] Code: 89 f0 89 55 dc e8 8d 96 0a 00 8b 45 e0 8b 55 dc 83 78 04 01 75 28 8b 83 18 02 00 00 85 c0 74 0f 8b 4d ec 3b 81 ac 00 00 00 74 13 <0f> 0b eb fe 8b 4d ec 8b 81 ac 00 00 00 89 83 18 02 00 00 89 f0
[ 644.292143] EIP: [<c11c70e3>] drm_open+0x4b1/0x4e2 SS:ESP 0068:f647adfc
[ 644.292175] ---[ end trace 2ddd476af89a60fa ]---
Signed-off-by: Chris Wilson <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_fops.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -140,14 +140,16 @@ int drm_open(struct inode *inode, struct
spin_unlock(&dev->count_lock);
}
out:
- mutex_lock(&dev->struct_mutex);
- if (minor->type == DRM_MINOR_LEGACY) {
- BUG_ON((dev->dev_mapping != NULL) &&
- (dev->dev_mapping != inode->i_mapping));
- if (dev->dev_mapping == NULL)
- dev->dev_mapping = inode->i_mapping;
+ if (!retcode) {
+ mutex_lock(&dev->struct_mutex);
+ if (minor->type == DRM_MINOR_LEGACY) {
+ if (dev->dev_mapping == NULL)
+ dev->dev_mapping = inode->i_mapping;
+ else if (dev->dev_mapping != inode->i_mapping)
+ retcode = -ENODEV;
+ }
+ mutex_unlock(&dev->struct_mutex);
}
- mutex_unlock(&dev->struct_mutex);
return retcode;
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Alex Deucher <[email protected]>
commit f95df9ca6896978108201a77422a1ae2cdc595ec upstream.
RS4xx+ IGP chips use an internal gart, however,
some of them have the agp cap bits set in their pci
configs. Make sure to clear the AGP flag as AGP will
not work with them.
Should fix fdo bug 27225
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_device.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -655,6 +655,14 @@ int radeon_device_init(struct radeon_dev
return r;
radeon_check_arguments(rdev);
+ /* all of the newer IGP chips have an internal gart
+ * However some rs4xx report as AGP, so remove that here.
+ */
+ if ((rdev->family >= CHIP_RS400) &&
+ (rdev->flags & RADEON_IS_IGP)) {
+ rdev->flags &= ~RADEON_IS_AGP;
+ }
+
if (rdev->flags & RADEON_IS_AGP && radeon_agpmode == -1) {
radeon_agp_disable(rdev);
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Alex Deucher <[email protected]>
commit 15f7207761cfcf8f53fb6e5cacffe060478782c3 upstream.
Based on ddx patch by Andrzej Hajda.
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_legacy_tv.c | 29 ++++++++++++++++++++++++-----
1 file changed, 24 insertions(+), 5 deletions(-)
--- a/drivers/gpu/drm/radeon/radeon_legacy_tv.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
@@ -57,6 +57,10 @@
#define NTSC_TV_PLL_N_14 693
#define NTSC_TV_PLL_P_14 7
+#define PAL_TV_PLL_M_14 19
+#define PAL_TV_PLL_N_14 353
+#define PAL_TV_PLL_P_14 5
+
#define VERT_LEAD_IN_LINES 2
#define FRAC_BITS 0xe
#define FRAC_MASK 0x3fff
@@ -205,9 +209,24 @@ static const struct radeon_tv_mode_const
630627, /* defRestart */
347, /* crtcPLL_N */
14, /* crtcPLL_M */
- 8, /* crtcPLL_postDiv */
+ 8, /* crtcPLL_postDiv */
1022, /* pixToTV */
},
+ { /* PAL timing for 14 Mhz ref clk */
+ 800, /* horResolution */
+ 600, /* verResolution */
+ TV_STD_PAL, /* standard */
+ 1131, /* horTotal */
+ 742, /* verTotal */
+ 813, /* horStart */
+ 840, /* horSyncStart */
+ 633, /* verSyncStart */
+ 708369, /* defRestart */
+ 211, /* crtcPLL_N */
+ 9, /* crtcPLL_M */
+ 8, /* crtcPLL_postDiv */
+ 759, /* pixToTV */
+ },
};
#define N_AVAILABLE_MODES ARRAY_SIZE(available_tv_modes)
@@ -242,7 +261,7 @@ static const struct radeon_tv_mode_const
if (pll->reference_freq == 2700)
const_ptr = &available_tv_modes[1];
else
- const_ptr = &available_tv_modes[1]; /* FIX ME */
+ const_ptr = &available_tv_modes[3];
}
return const_ptr;
}
@@ -685,9 +704,9 @@ void radeon_legacy_tv_mode_set(struct dr
n = PAL_TV_PLL_N_27;
p = PAL_TV_PLL_P_27;
} else {
- m = PAL_TV_PLL_M_27;
- n = PAL_TV_PLL_N_27;
- p = PAL_TV_PLL_P_27;
+ m = PAL_TV_PLL_M_14;
+ n = PAL_TV_PLL_N_14;
+ p = PAL_TV_PLL_P_14;
}
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Alex Deucher <[email protected]>
commit 338e2b1d571e4873908b199c90d6a31f65137fe3 upstream.
This should go to 2.6.33 stable as well.
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/drm/drm_pciids.h | 1 +
1 file changed, 1 insertion(+)
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -375,6 +375,7 @@
{0x1002, 0x9712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9713, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9714, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9715, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0, 0, 0}
#define r128_PCI_IDS \
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Mike Christie <[email protected]>
commit 4ae0a6c15efcc37e94e3f30e3533bdec03c53126 upstream.
We could be failing/stopping a connection due to libiscsi starting
recovery/cleanup, but the xmit path or scsi eh thread path
could be dropping the connection at the same time.
As a result the session->state gets set to failed instead of in
recovery. We end up not blocking the session
and so the replacement timeout never gets started and we only end up
failing the IO when scsi_softirq_done sees that the
cmd has been running for (cmd->allowed + 1) * rq->timeout secs.
We used to fail the IO right away so users are seeing a long
delay when using dm-multipath. This problem was added in
2.6.28.
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/libiscsi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -3027,14 +3027,15 @@ static void iscsi_start_session_recovery
session->state = ISCSI_STATE_TERMINATE;
else if (conn->stop_stage != STOP_CONN_RECOVER)
session->state = ISCSI_STATE_IN_RECOVERY;
+
+ old_stop_stage = conn->stop_stage;
+ conn->stop_stage = flag;
spin_unlock_bh(&session->lock);
del_timer_sync(&conn->transport_timer);
iscsi_suspend_tx(conn);
spin_lock_bh(&session->lock);
- old_stop_stage = conn->stop_stage;
- conn->stop_stage = flag;
conn->c_stage = ISCSI_CONN_STOPPED;
spin_unlock_bh(&session->lock);
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Dave Airlie <[email protected]>
commit 97f23b3d85a4d734a8584dade3a34579931c8f8d upstream.
We can get this if the user moves the mouse when we are waiting to move
some stuff around in the validate. Don't fail.
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_cs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -248,7 +248,8 @@ int radeon_cs_ioctl(struct drm_device *d
}
r = radeon_cs_parser_relocs(&parser);
if (r) {
- DRM_ERROR("Failed to parse relocation !\n");
+ if (r != -ERESTARTSYS)
+ DRM_ERROR("Failed to parse relocation %d!\n", r);
radeon_cs_parser_fini(&parser, r);
mutex_unlock(&rdev->cs_mutex);
return r;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Oleg Nesterov <[email protected]>
commit b95c35e76b29ba812e5dabdd91592e25ec640e93 upstream.
proc_oom_score(task) has a reference to task_struct, but that is all.
If this task was already released before we take tasklist_lock
- we can't use task->group_leader, it points to nowhere
- it is not safe to call badness() even if this task is
->group_leader, has_intersects_mems_allowed() assumes
it is safe to iterate over ->thread_group list.
- even worse, badness() can hit ->signal == NULL
Add the pid_alive() check to ensure __unhash_process() was not called.
Also, use "task" instead of task->group_leader. badness() should return
the same result for any sub-thread. Currently this is not true, but
this should be changed anyway.
Signed-off-by: Oleg Nesterov <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/proc/base.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -442,12 +442,13 @@ static const struct file_operations proc
unsigned long badness(struct task_struct *p, unsigned long uptime);
static int proc_oom_score(struct task_struct *task, char *buffer)
{
- unsigned long points;
+ unsigned long points = 0;
struct timespec uptime;
do_posix_clock_monotonic_gettime(&uptime);
read_lock(&tasklist_lock);
- points = badness(task->group_leader, uptime.tv_sec);
+ if (pid_alive(task))
+ points = badness(task, uptime.tv_sec);
read_unlock(&tasklist_lock);
return sprintf(buffer, "%lu\n", points);
}
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Nikolaus Schulz <[email protected]>
commit 30d1872d9eb3663b4cf7bdebcbf5cd465674cced upstream.
When using the string representation of a random counter as part of the base
name, ensure that it is no longer than 4 bytes.
Since we are repeatedly decrementing the counter in a loop until we have found a
unique base name, the counter may wrap around zero; therefore, it is not enough
to mask its higher bits before entering the loop, this must be done inside the
loop.
[[email protected]: use snprintf()]
Signed-off-by: Nikolaus Schulz <[email protected]>
Signed-off-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fat/namei_vfat.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -309,7 +309,7 @@ static int vfat_create_shortname(struct
{
struct fat_mount_options *opts = &MSDOS_SB(dir->i_sb)->options;
wchar_t *ip, *ext_start, *end, *name_start;
- unsigned char base[9], ext[4], buf[8], *p;
+ unsigned char base[9], ext[4], buf[5], *p;
unsigned char charbuf[NLS_MAX_CHARSET_SIZE];
int chl, chi;
int sz = 0, extlen, baselen, i, numtail_baselen, numtail2_baselen;
@@ -467,7 +467,7 @@ static int vfat_create_shortname(struct
return 0;
}
- i = jiffies & 0xffff;
+ i = jiffies;
sz = (jiffies >> 16) & 0x7;
if (baselen > 2) {
baselen = numtail2_baselen;
@@ -476,7 +476,7 @@ static int vfat_create_shortname(struct
name_res[baselen + 4] = '~';
name_res[baselen + 5] = '1' + sz;
while (1) {
- sprintf(buf, "%04X", i);
+ snprintf(buf, sizeof(buf), "%04X", i & 0xffff);
memcpy(&name_res[baselen], buf, 4);
if (vfat_find_form(dir, name_res) < 0)
break;
2.6.33-stable review patch. If anyone has any objections, please let us know.
------------------
From: Zhao Yakui <[email protected]>
commit 725398322d05486109375fbb85c3404108881e17 upstream.
Now the EDID property will be updated when the corresponding EDID can be
obtained from the external display device. But after the external device
is plugged-out, the EDID property is not updated. In such case we still
get the corresponding EDID property although it is already detected as
disconnected.
https://bugs.freedesktop.org/show_bug.cgi?id=26743
Signed-off-by: Zhao Yakui <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_crtc_helper.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -104,6 +104,7 @@ int drm_helper_probe_single_connector_mo
if (connector->status == connector_status_disconnected) {
DRM_DEBUG_KMS("%s is disconnected\n",
drm_get_connector_name(connector));
+ drm_mode_connector_update_edid_property(connector, NULL);
goto prune;
}
* Greg KH | 2010-04-22 12:55:16 [-0700]:
>2.6.33-stable review patch. If anyone has any objections, please let us know.
Greg, you picked this patch without "MIPS: uasm: Add OR instruction"
Please drop it _or_ add both. This patch alone will break compilation of
the whole MIPS tree.
Sebastian
On Thu, Apr 22, 2010 at 12:57:15PM -0700, Greg KH wrote:
> This is the start of the stable review cycle for the 2.6.33.3 release.
> There are 139 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Saturday, April 24, 15:00:00 UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v2.6/stable-review/patch-2.6.33.3-rc1.gz
> and the diffstat can be found below.
A -rc2 patch is now out at:
kernel.org/pub/linux/kernel/v2.6/stable-review/patch-2.6.33.3-rc2.gz
that fixes some build errors.
thanks,
greg k-h