Cleaned up and fixed coding convention issues as reported by checkpatch.pl
on the file `drivers/adl_pci9111.c' as well as other minor changes for
consistency and clarity.
Signed-off-by: Henri Häkkinen <[email protected]>
---
drivers/staging/comedi/drivers/adl_pci9111.c | 423 ++++++++++++++------------
1 files changed, 231 insertions(+), 192 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index 36a254c..3328560 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -38,8 +38,8 @@ Supports:
- do_insn read/write
- ai_do_cmd mode with the following sources:
- - start_src TRIG_NOW
- - scan_begin_src TRIG_FOLLOW TRIG_TIMER TRIG_EXT
+ - start_src TRIG_NOW
+ - scan_begin_src TRIG_FOLLOW TRIG_TIMER TRIG_EXT
- convert_src TRIG_TIMER TRIG_EXT
- scan_end_src TRIG_COUNT
- stop_src TRIG_COUNT TRIG_NONE
@@ -68,8 +68,9 @@ CHANGELOG:
TODO:
- Really test implemented functionality.
- - Add support for the PCI-9111DG with a probe routine to identify the card type
- (perhaps with the help of the channel number readback of the A/D Data register).
+ - Add support for the PCI-9111DG with a probe routine to identify
+ the card type (perhaps with the help of the channel number readback
+ of the A/D Data register).
- Add external multiplexer support.
*/
@@ -83,12 +84,12 @@ TODO:
#include "comedi_pci.h"
#include "comedi_fc.h"
-#define PCI9111_DRIVER_NAME "adl_pci9111"
-#define PCI9111_HR_DEVICE_ID 0x9111
+#define PCI9111_DRIVER_NAME "adl_pci9111"
+#define PCI9111_HR_DEVICE_ID 0x9111
-/* TODO: Add other pci9111 board id */
+/* TODO: Add other pci9111 board id */
-#define PCI9111_IO_RANGE 0x0100
+#define PCI9111_IO_RANGE 0x0100
#define PCI9111_FIFO_HALF_SIZE 512
@@ -134,27 +135,29 @@ TODO:
/* IO address map */
-#define PCI9111_REGISTER_AD_FIFO_VALUE 0x00 /* AD Data stored in FIFO */
-#define PCI9111_REGISTER_DA_OUTPUT 0x00
-#define PCI9111_REGISTER_DIGITAL_IO 0x02
-#define PCI9111_REGISTER_EXTENDED_IO_PORTS 0x04
-#define PCI9111_REGISTER_AD_CHANNEL_CONTROL 0x06 /* Channel selection */
-#define PCI9111_REGISTER_AD_CHANNEL_READBACK 0x06
-#define PCI9111_REGISTER_INPUT_SIGNAL_RANGE 0x08
-#define PCI9111_REGISTER_RANGE_STATUS_READBACK 0x08
-#define PCI9111_REGISTER_TRIGGER_MODE_CONTROL 0x0A
-#define PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK 0x0A
-#define PCI9111_REGISTER_SOFTWARE_TRIGGER 0x0E
-#define PCI9111_REGISTER_INTERRUPT_CONTROL 0x0C
+/* AD Data stored in FIFO */
+#define PCI9111_REGISTER_AD_FIFO_VALUE 0x00
+#define PCI9111_REGISTER_DA_OUTPUT 0x00
+#define PCI9111_REGISTER_DIGITAL_IO 0x02
+#define PCI9111_REGISTER_EXTENDED_IO_PORTS 0x04
+/* Channel selection */
+#define PCI9111_REGISTER_AD_CHANNEL_CONTROL 0x06
+#define PCI9111_REGISTER_AD_CHANNEL_READBACK 0x06
+#define PCI9111_REGISTER_INPUT_SIGNAL_RANGE 0x08
+#define PCI9111_REGISTER_RANGE_STATUS_READBACK 0x08
+#define PCI9111_REGISTER_TRIGGER_MODE_CONTROL 0x0A
+#define PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK 0x0A
+#define PCI9111_REGISTER_SOFTWARE_TRIGGER 0x0E
+#define PCI9111_REGISTER_INTERRUPT_CONTROL 0x0C
#define PCI9111_REGISTER_8254_COUNTER_0 0x40
#define PCI9111_REGISTER_8254_COUNTER_1 0x42
-#define PCI9111_REGISTER_8254_COUNTER_2 0X44
+#define PCI9111_REGISTER_8254_COUNTER_2 0X44
#define PCI9111_REGISTER_8254_CONTROL 0x46
-#define PCI9111_REGISTER_INTERRUPT_CLEAR 0x48
+#define PCI9111_REGISTER_INTERRUPT_CLEAR 0x48
-#define PCI9111_TRIGGER_MASK 0x0F
-#define PCI9111_PTRG_OFF (0 << 3)
-#define PCI9111_PTRG_ON (1 << 3)
+#define PCI9111_TRIGGER_MASK 0x0F
+#define PCI9111_PTRG_OFF (0 << 3)
+#define PCI9111_PTRG_ON (1 << 3)
#define PCI9111_EITS_EXTERNAL (1 << 2)
#define PCI9111_EITS_INTERNAL (0 << 2)
#define PCI9111_TPST_SOFTWARE_TRIGGER (0 << 1)
@@ -164,9 +167,9 @@ TODO:
#define PCI9111_ISC0_SET_IRQ_ON_ENDING_OF_AD_CONVERSION (0 << 0)
#define PCI9111_ISC0_SET_IRQ_ON_FIFO_HALF_FULL (1 << 0)
-#define PCI9111_ISC1_SET_IRQ_ON_TIMER_TICK (0 << 1)
-#define PCI9111_ISC1_SET_IRQ_ON_EXT_TRG (1 << 1)
-#define PCI9111_FFEN_SET_FIFO_ENABLE (0 << 2)
+#define PCI9111_ISC1_SET_IRQ_ON_TIMER_TICK (0 << 1)
+#define PCI9111_ISC1_SET_IRQ_ON_EXT_TRG (1 << 1)
+#define PCI9111_FFEN_SET_FIFO_ENABLE (0 << 2)
#define PCI9111_FFEN_SET_FIFO_DISABLE (1 << 2)
#define PCI9111_CHANNEL_MASK 0x0F
@@ -177,90 +180,114 @@ TODO:
#define PCI9111_FIFO_FULL_MASK 0x40
#define PCI9111_AD_BUSY_MASK 0x80
-#define PCI9111_IO_BASE dev->iobase
+#define PCI9111_IO_BASE dev->iobase
/*
* Define inlined function
*/
#define pci9111_trigger_and_autoscan_get() \
- (inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK)&0x0F)
+ (inb(PCI9111_IO_BASE + PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK) \
+ & 0x0F)
#define pci9111_trigger_and_autoscan_set(flags) \
- outb(flags, PCI9111_IO_BASE+PCI9111_REGISTER_TRIGGER_MODE_CONTROL)
+ outb(flags, PCI9111_IO_BASE + PCI9111_REGISTER_TRIGGER_MODE_CONTROL)
#define pci9111_interrupt_and_fifo_get() \
- ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK) >> 4) &0x03)
+ ((inb(PCI9111_IO_BASE + PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK) \
+ >> 4) & 0x03)
#define pci9111_interrupt_and_fifo_set(flags) \
- outb(flags, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL)
+ outb(flags, PCI9111_IO_BASE + PCI9111_REGISTER_INTERRUPT_CONTROL)
#define pci9111_interrupt_clear() \
- outb(0, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CLEAR)
+ outb(0, PCI9111_IO_BASE + PCI9111_REGISTER_INTERRUPT_CLEAR)
#define pci9111_software_trigger() \
- outb(0, PCI9111_IO_BASE+PCI9111_REGISTER_SOFTWARE_TRIGGER)
+ outb(0, PCI9111_IO_BASE + PCI9111_REGISTER_SOFTWARE_TRIGGER)
#define pci9111_fifo_reset() \
- outb(PCI9111_FFEN_SET_FIFO_ENABLE, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL); \
- outb(PCI9111_FFEN_SET_FIFO_DISABLE, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL); \
- outb(PCI9111_FFEN_SET_FIFO_ENABLE, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL)
+ outb(PCI9111_FFEN_SET_FIFO_ENABLE, \
+ PCI9111_IO_BASE + PCI9111_REGISTER_INTERRUPT_CONTROL); \
+ outb(PCI9111_FFEN_SET_FIFO_DISABLE, \
+ PCI9111_IO_BASE + PCI9111_REGISTER_INTERRUPT_CONTROL); \
+ outb(PCI9111_FFEN_SET_FIFO_ENABLE, \
+ PCI9111_IO_BASE + PCI9111_REGISTER_INTERRUPT_CONTROL);
#define pci9111_is_fifo_full() \
- ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)& \
- PCI9111_FIFO_FULL_MASK)==0)
+ ((inb(PCI9111_IO_BASE + PCI9111_REGISTER_RANGE_STATUS_READBACK) & \
+ PCI9111_FIFO_FULL_MASK) == 0)
#define pci9111_is_fifo_half_full() \
- ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)& \
- PCI9111_FIFO_HALF_FULL_MASK)==0)
+ ((inb(PCI9111_IO_BASE + PCI9111_REGISTER_RANGE_STATUS_READBACK) & \
+ PCI9111_FIFO_HALF_FULL_MASK) == 0)
#define pci9111_is_fifo_empty() \
- ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)& \
- PCI9111_FIFO_EMPTY_MASK)==0)
+ ((inb(PCI9111_IO_BASE + PCI9111_REGISTER_RANGE_STATUS_READBACK) & \
+ PCI9111_FIFO_EMPTY_MASK) == 0)
#define pci9111_ai_channel_set(channel) \
- outb((channel)&PCI9111_CHANNEL_MASK, PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_CONTROL)
+ outb((channel) & PCI9111_CHANNEL_MASK, PCI9111_IO_BASE + \
+ PCI9111_REGISTER_AD_CHANNEL_CONTROL)
#define pci9111_ai_channel_get() \
- inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_READBACK)&PCI9111_CHANNEL_MASK
+ inb(PCI9111_IO_BASE + PCI9111_REGISTER_AD_CHANNEL_READBACK) & \
+ PCI9111_CHANNEL_MASK
#define pci9111_ai_range_set(range) \
- outb((range)&PCI9111_RANGE_MASK, PCI9111_IO_BASE+PCI9111_REGISTER_INPUT_SIGNAL_RANGE)
+ outb((range) & PCI9111_RANGE_MASK, PCI9111_IO_BASE + \
+ PCI9111_REGISTER_INPUT_SIGNAL_RANGE)
#define pci9111_ai_range_get() \
- inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)&PCI9111_RANGE_MASK
+ inb(PCI9111_IO_BASE + PCI9111_REGISTER_RANGE_STATUS_READBACK) & \
+ PCI9111_RANGE_MASK
#define pci9111_ai_get_data() \
- ((inw(PCI9111_IO_BASE+PCI9111_REGISTER_AD_FIFO_VALUE)>>4)&PCI9111_AI_RESOLUTION_MASK) \
- ^ PCI9111_AI_RESOLUTION_2_CMP_BIT
+ ((inw(PCI9111_IO_BASE + PCI9111_REGISTER_AD_FIFO_VALUE) >> 4) & \
+ PCI9111_AI_RESOLUTION_MASK) ^ \
+ PCI9111_AI_RESOLUTION_2_CMP_BIT
#define pci9111_hr_ai_get_data() \
- (inw(PCI9111_IO_BASE+PCI9111_REGISTER_AD_FIFO_VALUE) & PCI9111_HR_AI_RESOLUTION_MASK) \
- ^ PCI9111_HR_AI_RESOLUTION_2_CMP_BIT
+ (inw(PCI9111_IO_BASE + PCI9111_REGISTER_AD_FIFO_VALUE) & \
+ PCI9111_HR_AI_RESOLUTION_MASK) ^ \
+ PCI9111_HR_AI_RESOLUTION_2_CMP_BIT
#define pci9111_ao_set_data(data) \
- outw(data&PCI9111_AO_RESOLUTION_MASK, PCI9111_IO_BASE+PCI9111_REGISTER_DA_OUTPUT)
+ outw(data&PCI9111_AO_RESOLUTION_MASK, \
+ PCI9111_IO_BASE + PCI9111_REGISTER_DA_OUTPUT)
#define pci9111_di_get_bits() \
- inw(PCI9111_IO_BASE+PCI9111_REGISTER_DIGITAL_IO)
+ inw(PCI9111_IO_BASE+PCI9111_REGISTER_DIGITAL_IO)
#define pci9111_do_set_bits(bits) \
- outw(bits, PCI9111_IO_BASE+PCI9111_REGISTER_DIGITAL_IO)
+ outw(bits, PCI9111_IO_BASE + PCI9111_REGISTER_DIGITAL_IO)
#define pci9111_8254_control_set(flags) \
- outb(flags, PCI9111_IO_BASE+PCI9111_REGISTER_8254_CONTROL)
+ outb(flags, PCI9111_IO_BASE + PCI9111_REGISTER_8254_CONTROL)
#define pci9111_8254_counter_0_set(data) \
- outb(data & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_0); \
- outb((data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_0)
+ do { \
+ outb(data & 0xFF, \
+ PCI9111_IO_BASE + PCI9111_REGISTER_8254_COUNTER_0); \
+ outb((data >> 8) & 0xFF, \
+ PCI9111_IO_BASE + PCI9111_REGISTER_8254_COUNTER_0); \
+ } while (0)
#define pci9111_8254_counter_1_set(data) \
- outb(data & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_1); \
- outb((data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_1)
+ do { \
+ outb(data & 0xFF, \
+ PCI9111_IO_BASE + PCI9111_REGISTER_8254_COUNTER_1); \
+ outb((data >> 8) & 0xFF, \
+ PCI9111_IO_BASE + PCI9111_REGISTER_8254_COUNTER_1); \
+ } while (0)
#define pci9111_8254_counter_2_set(data) \
- outb(data & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_2); \
- outb((data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_2)
+ do { \
+ outb(data & 0xFF, \
+ PCI9111_IO_BASE + PCI9111_REGISTER_8254_COUNTER_2); \
+ outb((data >> 8) & 0xFF, \
+ PCI9111_IO_BASE + PCI9111_REGISTER_8254_COUNTER_2); \
+ } while (0)
/* Function prototypes */
@@ -280,16 +307,15 @@ static const struct comedi_lrange pci9111_hr_ai_range = {
BIP_RANGE(2.5),
BIP_RANGE(1.25),
BIP_RANGE(0.625)
- }
+ }
};
static DEFINE_PCI_DEVICE_TABLE(pci9111_pci_table) = {
- {
- PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0, 0, 0},
- /* { PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
- {
- 0}
+ {PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0},
+ /* {PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 }, */
+ {0}
};
MODULE_DEVICE_TABLE(pci, pci9111_pci_table);
@@ -339,13 +365,14 @@ static struct comedi_driver pci9111_driver = {
COMEDI_PCI_INITCLEANUP(pci9111_driver, pci9111_pci_table);
-/* Private data structure */
+/* Private data structure */
struct pci9111_private_data {
struct pci_dev *pci_device;
- unsigned long io_range; /* PCI6503 io range */
+ unsigned long io_range; /* PCI6503 io range */
- unsigned long lcr_io_base; /* Local configuration register base address */
+ /* Local configuration register base address */
+ unsigned long lcr_io_base;
unsigned long lcr_io_range;
int stop_counter;
@@ -356,17 +383,18 @@ struct pci9111_private_data {
unsigned int chunk_counter;
unsigned int chunk_num_samples;
- int ao_readback; /* Last written analog output data */
+ int ao_readback; /* Last written analog output data */
- unsigned int timer_divisor_1; /* Divisor values for the 8254 timer pacer */
+ /* Divisor values for the 8254 timer pacer */
+ unsigned int timer_divisor_1;
unsigned int timer_divisor_2;
- int is_valid; /* Is device valid */
+ int is_valid; /* Is device valid */
short ai_bounce_buffer[2 * PCI9111_FIFO_HALF_SIZE];
};
-#define dev_private ((struct pci9111_private_data *)dev->private)
+#define dev_private ((struct pci9111_private_data *)dev->private)
/* ------------------------------------------------------------------ */
/* PLX9050 SECTION */
@@ -549,13 +577,17 @@ static int pci9111_ai_cancel(struct comedi_device *dev,
/* Test analog input command */
#define pci9111_check_trigger_src(src, flags) \
- tmp = src; \
- src &= flags; \
- if (!src || tmp != src) error++
+ do { \
+ tmp = src; \
+ src &= flags; \
+ if (!src || tmp != src) \
+ error++; \
+ } while (0)
static int
pci9111_ai_do_cmd_test(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_cmd *cmd)
+ struct comedi_subdevice *s,
+ struct comedi_cmd *cmd)
{
int tmp;
int error = 0;
@@ -563,7 +595,7 @@ pci9111_ai_do_cmd_test(struct comedi_device *dev,
int i;
struct pci9111_board *board = (struct pci9111_board *)dev->board_ptr;
- /* Step 1 : check if trigger are trivialy valid */
+ /* Step 1 : check if trigger are trivialy valid */
pci9111_check_trigger_src(cmd->start_src, TRIG_NOW);
pci9111_check_trigger_src(cmd->scan_begin_src,
@@ -575,7 +607,8 @@ pci9111_ai_do_cmd_test(struct comedi_device *dev,
if (error)
return 1;
- /* step 2 : make sure trigger sources are unique and mutually compatible */
+ /* Step 2 : make sure trigger sources are unique and
+ * mutually compatible */
if (cmd->start_src != TRIG_NOW)
error++;
@@ -605,7 +638,7 @@ pci9111_ai_do_cmd_test(struct comedi_device *dev,
if (error)
return 2;
- /* Step 3 : make sure arguments are trivialy compatible */
+ /* Step 3 : make sure arguments are trivialy compatible */
if (cmd->chanlist_len < 1) {
cmd->chanlist_len = 1;
@@ -637,7 +670,8 @@ pci9111_ai_do_cmd_test(struct comedi_device *dev,
cmd->scan_begin_arg = board->ai_acquisition_period_min_ns;
error++;
}
- if ((cmd->scan_begin_src == TRIG_FOLLOW) && (cmd->scan_begin_arg != 0)) {
+ if ((cmd->scan_begin_src == TRIG_FOLLOW) &&
+ (cmd->scan_begin_arg != 0)) {
cmd->scan_begin_arg = 0;
error++;
}
@@ -664,7 +698,7 @@ pci9111_ai_do_cmd_test(struct comedi_device *dev,
if (error)
return 3;
- /* Step 4 : fix up any arguments */
+ /* Step 4 : fix up any arguments */
if (cmd->convert_src == TRIG_TIMER) {
tmp = cmd->convert_arg;
@@ -676,8 +710,8 @@ pci9111_ai_do_cmd_test(struct comedi_device *dev,
if (tmp != cmd->convert_arg)
error++;
}
- /* There's only one timer on this card, so the scan_begin timer must */
- /* be a multiple of chanlist_len*convert_arg */
+ /* There's only one timer on this card, so the scan_begin timer must
+ * be a multiple of chanlist_len*convert_arg */
if (cmd->scan_begin_src == TRIG_TIMER) {
@@ -706,7 +740,7 @@ pci9111_ai_do_cmd_test(struct comedi_device *dev,
if (error)
return 4;
- /* Step 5 : check channel list */
+ /* Step 5 : check channel list */
if (cmd->chanlist) {
@@ -716,19 +750,15 @@ pci9111_ai_do_cmd_test(struct comedi_device *dev,
if (cmd->chanlist_len > 1) {
for (i = 0; i < cmd->chanlist_len; i++) {
if (CR_CHAN(cmd->chanlist[i]) != i) {
- comedi_error(dev,
- "entries in chanlist must be consecutive "
- "channels,counting upwards from 0\n");
+ comedi_error(dev, "entries in chanlist must be consecutive channels,counting upwards from 0\n");
error++;
}
if (CR_RANGE(cmd->chanlist[i]) != range) {
- comedi_error(dev,
- "entries in chanlist must all have the same gain\n");
+ comedi_error(dev, "entries in chanlist must all have the same gain\n");
error++;
}
if (CR_AREF(cmd->chanlist[i]) != reference) {
- comedi_error(dev,
- "entries in chanlist must all have the same reference\n");
+ comedi_error(dev, "entries in chanlist must all have the same reference\n");
error++;
}
}
@@ -736,8 +766,7 @@ pci9111_ai_do_cmd_test(struct comedi_device *dev,
if ((CR_CHAN(cmd->chanlist[0]) >
(board->ai_channel_nbr - 1))
|| (CR_CHAN(cmd->chanlist[0]) < 0)) {
- comedi_error(dev,
- "channel number is out of limits\n");
+ comedi_error(dev, "channel number is out of limits\n");
error++;
}
}
@@ -750,7 +779,7 @@ pci9111_ai_do_cmd_test(struct comedi_device *dev,
}
-/* Analog input command */
+/* Analog input command */
static int pci9111_ai_do_cmd(struct comedi_device *dev,
struct comedi_subdevice *subdevice)
@@ -758,13 +787,12 @@ static int pci9111_ai_do_cmd(struct comedi_device *dev,
struct comedi_cmd *async_cmd = &subdevice->async->cmd;
if (!dev->irq) {
- comedi_error(dev,
- "no irq assigned for PCI9111, cannot do hardware conversion");
+ comedi_error(dev, "no irq assigned for PCI9111, cannot do hardware conversion");
return -1;
}
- /* Set channel scan limit */
- /* PCI9111 allows only scanning from channel 0 to channel n */
- /* TODO: handle the case of an external multiplexer */
+ /* Set channel scan limit */
+ /* PCI9111 allows only scanning from channel 0 to channel n */
+ /* TODO: handle the case of an external multiplexer */
if (async_cmd->chanlist_len > 1) {
pci9111_ai_channel_set((async_cmd->chanlist_len) - 1);
@@ -774,8 +802,8 @@ static int pci9111_ai_do_cmd(struct comedi_device *dev,
pci9111_autoscan_set(dev, false);
}
- /* Set gain */
- /* This is the same gain on every channel */
+ /* Set gain */
+ /* This is the same gain on every channel */
pci9111_ai_range_set(CR_RANGE(async_cmd->chanlist[0]));
@@ -798,7 +826,7 @@ static int pci9111_ai_do_cmd(struct comedi_device *dev,
return -1;
}
- /* Set timer pacer */
+ /* Set timer pacer */
dev_private->scan_delay = 0;
switch (async_cmd->convert_src) {
@@ -831,7 +859,6 @@ static int pci9111_ai_do_cmd(struct comedi_device *dev,
break;
case TRIG_EXT:
-
pci9111_trigger_source_set(dev, external);
pci9111_fifo_reset();
pci9111_interrupt_source_set(dev, irq_on_fifo_half_full,
@@ -873,7 +900,8 @@ static int pci9111_ai_do_cmd(struct comedi_device *dev,
}
static void pci9111_ai_munge(struct comedi_device *dev,
- struct comedi_subdevice *s, void *data,
+ struct comedi_subdevice *s,
+ void *data,
unsigned int num_bytes,
unsigned int start_chan_index)
{
@@ -894,9 +922,9 @@ static void pci9111_ai_munge(struct comedi_device *dev,
}
}
-/* ------------------------------------------------------------------ */
-/* INTERRUPT SECTION */
-/* ------------------------------------------------------------------ */
+/* ------------------------------------------------------------------ */
+/* INTERRUPT SECTION */
+/* ------------------------------------------------------------------ */
#undef INTERRUPT_DEBUG
@@ -909,8 +937,8 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device)
unsigned char intcsr;
if (!dev->attached) {
- /* Ignore interrupt before device fully attached. */
- /* Might not even have allocated subdevices yet! */
+ /* Ignore interrupt before device fully attached.
+ * Might not even have allocated subdevices yet! */
return IRQ_NONE;
}
@@ -918,7 +946,7 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device)
spin_lock_irqsave(&dev->spinlock, irq_flags);
- /* Check if we are source of interrupt */
+ /* Check if we are source of interrupt */
intcsr = inb(dev_private->lcr_io_base +
PLX9050_REGISTER_INTERRUPT_CONTROL);
if (!(((intcsr & PLX9050_PCI_INTERRUPT_ENABLE) != 0)
@@ -926,15 +954,15 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device)
== (PLX9050_LINTI1_ENABLE | PLX9050_LINTI1_STATUS))
|| ((intcsr & (PLX9050_LINTI2_ENABLE | PLX9050_LINTI2_STATUS))
== (PLX9050_LINTI2_ENABLE | PLX9050_LINTI2_STATUS))))) {
- /* Not the source of the interrupt. */
- /* (N.B. not using PLX9050_SOFTWARE_INTERRUPT) */
+ /* Not the source of the interrupt.
+ * (N.B. not using PLX9050_SOFTWARE_INTERRUPT) */
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
return IRQ_NONE;
}
if ((intcsr & (PLX9050_LINTI1_ENABLE | PLX9050_LINTI1_STATUS)) ==
(PLX9050_LINTI1_ENABLE | PLX9050_LINTI1_STATUS)) {
- /* Interrupt comes from fifo_half-full signal */
+ /* Interrupt comes from fifo_half-full signal */
if (pci9111_is_fifo_full()) {
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
@@ -952,7 +980,8 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device)
unsigned int bytes_written = 0;
#ifdef INTERRUPT_DEBUG
- printk(PCI9111_DRIVER_NAME ": fifo is half full\n");
+ comedi_info(PCI9111_DRIVER_NAME
+ ": fifo is half full\n");
#endif
num_samples =
@@ -991,14 +1020,16 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device)
bytes_written +=
cfc_write_array_to_buffer
(subdevice,
- dev_private->ai_bounce_buffer
+ dev_private->
+ ai_bounce_buffer
+ position,
to_read * sizeof(short));
} else {
to_read =
- dev_private->chunk_num_samples
- -
- dev_private->chunk_counter;
+ dev_private->
+ chunk_num_samples
+ - dev_private->
+ chunk_counter;
if (to_read >
num_samples - position)
to_read =
@@ -1040,17 +1071,18 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device)
return IRQ_HANDLED;
}
-/* ------------------------------------------------------------------ */
-/* INSTANT ANALOG INPUT OUTPUT SECTION */
-/* ------------------------------------------------------------------ */
+/* ------------------------------------------------------------------ */
+/* INSTANT ANALOG INPUT OUTPUT SECTION */
+/* ------------------------------------------------------------------ */
-/* analog instant input */
+/* analog instant input */
#undef AI_INSN_DEBUG
static int pci9111_ai_insn_read(struct comedi_device *dev,
struct comedi_subdevice *subdevice,
- struct comedi_insn *insn, unsigned int *data)
+ struct comedi_insn *insn,
+ unsigned int *data)
{
int resolution =
((struct pci9111_board *)dev->board_ptr)->ai_resolution;
@@ -1058,9 +1090,10 @@ static int pci9111_ai_insn_read(struct comedi_device *dev,
int timeout, i;
#ifdef AI_INSN_DEBUG
- printk(PCI9111_DRIVER_NAME ": ai_insn set c/r/n = %2x/%2x/%2x\n",
- CR_CHAN((&insn->chanspec)[0]),
- CR_RANGE((&insn->chanspec)[0]), insn->n);
+ comedi_info(PCI9111_DRIVER_NAME ": ai_insn set c/r/n = %2x/%2x/%2x\n",
+ CR_CHAN((&insn->chanspec)[0]),
+ CR_RANGE((&insn->chanspec)[0]),
+ insn->n);
#endif
pci9111_ai_channel_set(CR_CHAN((&insn->chanspec)[0]));
@@ -1094,19 +1127,21 @@ conversion_done:
}
#ifdef AI_INSN_DEBUG
- printk(PCI9111_DRIVER_NAME ": ai_insn get c/r/t = %2x/%2x/%2x\n",
- pci9111_ai_channel_get(),
- pci9111_ai_range_get(), pci9111_trigger_and_autoscan_get());
+ comedi_info(PCI9111_DRIVER_NAME ": ai_insn get c/r/t = %2x/%2x/%2x\n",
+ pci9111_ai_channel_get(),
+ pci9111_ai_range_get(),
+ pci9111_trigger_and_autoscan_get());
#endif
return i;
}
-/* Analog instant output */
+/* Analog instant output */
static int
pci9111_ao_insn_write(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
unsigned int *data)
{
int i;
@@ -1119,11 +1154,12 @@ pci9111_ao_insn_write(struct comedi_device *dev,
return i;
}
-/* Analog output readback */
+/* Analog output readback */
static int pci9111_ao_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ struct comedi_insn *insn,
+ unsigned int *data)
{
int i;
@@ -1133,15 +1169,16 @@ static int pci9111_ao_insn_read(struct comedi_device *dev,
return i;
}
-/* ------------------------------------------------------------------ */
-/* DIGITAL INPUT OUTPUT SECTION */
-/* ------------------------------------------------------------------ */
+/* ------------------------------------------------------------------ */
+/* DIGITAL INPUT OUTPUT SECTION */
+/* ------------------------------------------------------------------ */
-/* Digital inputs */
+/* Digital inputs */
static int pci9111_di_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *subdevice,
- struct comedi_insn *insn, unsigned int *data)
+ struct comedi_insn *insn,
+ unsigned int *data)
{
unsigned int bits;
@@ -1151,17 +1188,18 @@ static int pci9111_di_insn_bits(struct comedi_device *dev,
return 2;
}
-/* Digital outputs */
+/* Digital outputs */
static int pci9111_do_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *subdevice,
- struct comedi_insn *insn, unsigned int *data)
+ struct comedi_insn *insn,
+ unsigned int *data)
{
unsigned int bits;
- /* Only set bits that have been masked */
- /* data[0] = mask */
- /* data[1] = bit state */
+ /* Only set bits that have been masked */
+ /* data[0] = mask */
+ /* data[1] = bit state */
data[0] &= PCI9111_DO_MASK;
@@ -1177,15 +1215,15 @@ static int pci9111_do_insn_bits(struct comedi_device *dev,
return 2;
}
-/* ------------------------------------------------------------------ */
-/* INITIALISATION SECTION */
-/* ------------------------------------------------------------------ */
+/* ------------------------------------------------------------------ */
+/* INITIALISATION SECTION */
+/* ------------------------------------------------------------------ */
-/* Reset device */
+/* Reset device */
static int pci9111_reset(struct comedi_device *dev)
{
- /* Set trigger source to software */
+ /* Set trigger source to software */
plx9050_interrupt_control(dev_private->lcr_io_base, true, true, true,
true, false);
@@ -1194,7 +1232,7 @@ static int pci9111_reset(struct comedi_device *dev)
pci9111_pretrigger_set(dev, false);
pci9111_autoscan_set(dev, false);
- /* Reset 8254 chip */
+ /* Reset 8254 chip */
dev_private->timer_divisor_1 = 0;
dev_private->timer_divisor_2 = 0;
@@ -1204,9 +1242,9 @@ static int pci9111_reset(struct comedi_device *dev)
return 0;
}
-/* Attach */
-/* - Register PCI device */
-/* - Declare device driver capability */
+/* Attach
+ * - Register PCI device
+ * - Declare device driver capability */
static int pci9111_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
@@ -1219,9 +1257,9 @@ static int pci9111_attach(struct comedi_device *dev,
if (alloc_private(dev, sizeof(struct pci9111_private_data)) < 0)
return -ENOMEM;
- /* Probe the device to determine what device in the series it is. */
+ /* Probe the device to determine what device in the series it is. */
- printk("comedi%d: " PCI9111_DRIVER_NAME " driver\n", dev->minor);
+ comedi_info("minor %d: " PCI9111_DRIVER_NAME " driver\n", dev->minor);
for (pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
pci_device != NULL;
@@ -1230,17 +1268,18 @@ static int pci9111_attach(struct comedi_device *dev,
for (i = 0; i < pci9111_board_nbr; i++) {
if (pci9111_boards[i].device_id ==
pci_device->device) {
- /* was a particular bus/slot requested? */
+ /* was a particular bus/slot
+ * requested? */
if ((it->options[0] != 0)
|| (it->options[1] != 0)) {
- /* are we on the wrong bus/slot? */
+ /* are we on the wrong
+ * bus/slot? */
if (pci_device->bus->number !=
it->options[0]
||
PCI_SLOT(pci_device->devfn)
- != it->options[1]) {
+ != it->options[1])
continue;
- }
}
dev->board_ptr = pci9111_boards + i;
@@ -1254,44 +1293,44 @@ static int pci9111_attach(struct comedi_device *dev,
}
}
- printk("comedi%d: no supported board found! (req. bus/slot : %d/%d)\n",
- dev->minor, it->options[0], it->options[1]);
+ comedi_info("minor %d: no supported board found! "
+ "(req. bus/slot : %d/%d)\n",
+ dev->minor, it->options[0], it->options[1]);
return -EIO;
found:
- printk("comedi%d: found %s (b:s:f=%d:%d:%d) , irq=%d\n",
- dev->minor,
- pci9111_boards[i].name,
- pci_device->bus->number,
- PCI_SLOT(pci_device->devfn),
- PCI_FUNC(pci_device->devfn), pci_device->irq);
+ comedi_info("minor %d: found %s (b:s:f=%d:%d:%d) , irq=%d\n",
+ dev->minor,
+ pci9111_boards[i].name,
+ pci_device->bus->number,
+ PCI_SLOT(pci_device->devfn),
+ PCI_FUNC(pci_device->devfn), pci_device->irq);
- /* TODO: Warn about non-tested boards. */
+ /* TODO: Warn about non-tested boards. */
- /* Read local configuration register base address [PCI_BASE_ADDRESS #1]. */
+ /* Read local configuration register base address
+ * [PCI_BASE_ADDRESS #1]. */
lcr_io_base = pci_resource_start(pci_device, 1);
lcr_io_range = pci_resource_len(pci_device, 1);
- printk
- ("comedi%d: local configuration registers at address 0x%4lx [0x%4lx]\n",
- dev->minor, lcr_io_base, lcr_io_range);
+ comedi_info("minor %d: local configuration registers at address "
+ "0x%4lx [0x%4lx]\n",
+ dev->minor, lcr_io_base, lcr_io_range);
- /* Enable PCI device and request regions */
+ /* Enable PCI device and request regions */
if (comedi_pci_enable(pci_device, PCI9111_DRIVER_NAME) < 0) {
- printk
- ("comedi%d: Failed to enable PCI device and request regions\n",
- dev->minor);
+ comedi_err("%d: Failed to enable PCI device and request regions\n", dev->minor);
return -EIO;
}
- /* Read PCI6308 register base address [PCI_BASE_ADDRESS #2]. */
+ /* Read PCI6308 register base address [PCI_BASE_ADDRESS #2]. */
io_base = pci_resource_start(pci_device, 2);
io_range = pci_resource_len(pci_device, 2);
- printk("comedi%d: 6503 registers at address 0x%4lx [0x%4lx]\n",
- dev->minor, io_base, io_range);
+ comedi_info("minor %d: 6503 registers at address 0x%4lx [0x%4lx]\n",
+ dev->minor, io_base, io_range);
dev->iobase = io_base;
dev->board_name = board->name;
@@ -1302,20 +1341,20 @@ found:
pci9111_reset(dev);
- /* Irq setup */
+ /* Irq setup */
dev->irq = 0;
if (pci_device->irq > 0) {
if (request_irq(pci_device->irq, pci9111_interrupt,
IRQF_SHARED, PCI9111_DRIVER_NAME, dev) != 0) {
- printk("comedi%d: unable to allocate irq %u\n",
- dev->minor, pci_device->irq);
+ comedi_err("minor %d: unable to allocate irq %u\n",
+ dev->minor, pci_device->irq);
return -EINVAL;
}
}
dev->irq = pci_device->irq;
- /* TODO: Add external multiplexer setup (according to option[2]). */
+ /* TODO: Add external multiplexer setup (according to option[2]). */
error = alloc_subdevices(dev, 4);
if (error < 0)
@@ -1327,9 +1366,9 @@ found:
subdevice->type = COMEDI_SUBD_AI;
subdevice->subdev_flags = SDF_READABLE | SDF_COMMON | SDF_CMD_READ;
- /* TODO: Add external multiplexer data */
- /* if (devpriv->usemux) { subdevice->n_chan = devpriv->usemux; } */
- /* else { subdevice->n_chan = this_board->n_aichan; } */
+ /* TODO: Add external multiplexer data */
+ /* if (devpriv->usemux) { subdevice->n_chan = devpriv->usemux; }
+ * else { subdevice->n_chan = this_board->n_aichan; } */
subdevice->n_chan = board->ai_channel_nbr;
subdevice->maxdata = board->ai_resolution_mask;
@@ -1372,18 +1411,18 @@ found:
return 0;
}
-/* Detach */
+/* Detach */
static int pci9111_detach(struct comedi_device *dev)
{
- /* Reset device */
+ /* Reset device */
if (dev->private != NULL) {
if (dev_private->is_valid)
pci9111_reset(dev);
}
- /* Release previously allocated irq */
+ /* Release previously allocated irq */
if (dev->irq != 0)
free_irq(dev->irq, dev);
--
1.7.1
On Mon, Jun 14, 2010 at 11:04:51AM +0300, Henri H?kkinen wrote:
> Cleaned up and fixed coding convention issues as reported by checkpatch.pl
> on the file `drivers/adl_pci9111.c' as well as other minor changes for
> consistency and clarity.
For some reason, parts of this patch no longer apply. Can you redo it
against the latest linux-next tree and resend it?
thanks,
greg k-h