2010-12-08 11:48:43

by Chuanxiao Dong

[permalink] [raw]
Subject: [PATCH v2 2/2]remove the erase calculation part from core.c

remove the erase calculation part from core.c

change the mmc_set_erase_timeout rountine to directly get
the erase timeout value according to arg type and erase
groups count.

Signed-off-by: Chuanxiao Dong <[email protected]>
---
drivers/mmc/core/core.c | 120 ++++++++++++++--------------------------------
1 files changed, 37 insertions(+), 83 deletions(-)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 6286898..6d1b9e5 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1171,99 +1171,53 @@ void mmc_init_erase(struct mmc_card *card)
}
}

-static void mmc_set_mmc_erase_timeout(struct mmc_card *card,
- struct mmc_command *cmd,
- unsigned int arg, unsigned int qty)
+/*
+ * mmc_set_erase_timeout: set the cmd erase_timeout according
+ * to the argument type and erase groups count
+ */
+static void mmc_set_erase_timeout(struct mmc_card *card,
+ struct mmc_command *cmd, unsigned int arg,
+ unsigned int qty)
{
unsigned int erase_timeout;

- if (card->ext_csd.erase_group_def & 1) {
- /* High Capacity Erase Group Size uses HC timeouts */
- if (arg == MMC_TRIM_ARG)
- erase_timeout = card->ext_csd.trim_timeout;
- else
- erase_timeout = card->ext_csd.hc_erase_timeout;
+ if (mmc_card_sd(card)) {
+ erase_timeout = card->erase_timeout * qty;
+ if (card->ssr.erase_timeout)
+ /*
+ * Erase timeout specified in SSR,
+ * plus erase_offset
+ * */
+ erase_timeout += card->ssr.erase_offset;
+ /* Must not be less than 1 second */
+ if (erase_timeout < 1000)
+ erase_timeout = 1000;
} else {
- /* CSD Erase Group Size uses write timeout */
- unsigned int mult = (10 << card->csd.r2w_factor);
- unsigned int timeout_clks = card->csd.tacc_clks * mult;
- unsigned int timeout_us;
-
- /* Avoid overflow: e.g. tacc_ns=80000000 mult=1280 */
- if (card->csd.tacc_ns < 1000000)
- timeout_us = (card->csd.tacc_ns * mult) / 1000;
- else
- timeout_us = (card->csd.tacc_ns / 1000) * mult;
-
- /*
- * ios.clock is only a target. The real clock rate might be
- * less but not that much less, so fudge it by multiplying by 2.
- */
- timeout_clks <<= 1;
- timeout_us += (timeout_clks * 1000) /
- (card->host->ios.clock / 1000);
-
- erase_timeout = timeout_us / 1000;
-
+ if (arg & MMC_SECURE_ARGS) {
+ if (arg == MMC_SECURE_ERASE_ARG)
+ erase_timeout = qty *
+ card->sec_erase_timeout;
+ else
+ erase_timeout = qty *
+ card->sec_trim_timeout;
+ } else {
+ if (arg == MMC_TRIM_ARG)
+ erase_timeout = qty *
+ card->trim_timeout;
+ else
+ erase_timeout = qty *
+ card->erase_timeout;
+ }
/*
- * Theoretically, the calculation could underflow so round up
- * to 1ms in that case.
+ * Ensure at least a 1 second timeout for SPI as per
+ * 'mmc_set_data_timeout()'
*/
- if (!erase_timeout)
- erase_timeout = 1;
- }
-
- /* Multiplier for secure operations */
- if (arg & MMC_SECURE_ARGS) {
- if (arg == MMC_SECURE_ERASE_ARG)
- erase_timeout *= card->ext_csd.sec_erase_mult;
- else
- erase_timeout *= card->ext_csd.sec_trim_mult;
+ if (mmc_host_is_spi(card->host) && erase_timeout < 1000)
+ erase_timeout = 1000;
}
-
- erase_timeout *= qty;
-
- /*
- * Ensure at least a 1 second timeout for SPI as per
- * 'mmc_set_data_timeout()'
- */
- if (mmc_host_is_spi(card->host) && erase_timeout < 1000)
- erase_timeout = 1000;
-
cmd->erase_timeout = erase_timeout;
}

-static void mmc_set_sd_erase_timeout(struct mmc_card *card,
- struct mmc_command *cmd, unsigned int arg,
- unsigned int qty)
-{
- if (card->ssr.erase_timeout) {
- /* Erase timeout specified in SD Status Register (SSR) */
- cmd->erase_timeout = card->ssr.erase_timeout * qty +
- card->ssr.erase_offset;
- } else {
- /*
- * Erase timeout not specified in SD Status Register (SSR) so
- * use 250ms per write block.
- */
- cmd->erase_timeout = 250 * qty;
- }
-
- /* Must not be less than 1 second */
- if (cmd->erase_timeout < 1000)
- cmd->erase_timeout = 1000;
-}
-
-static void mmc_set_erase_timeout(struct mmc_card *card,
- struct mmc_command *cmd, unsigned int arg,
- unsigned int qty)
-{
- if (mmc_card_sd(card))
- mmc_set_sd_erase_timeout(card, cmd, arg, qty);
- else
- mmc_set_mmc_erase_timeout(card, cmd, arg, qty);
-}
-
static int mmc_do_erase(struct mmc_card *card, unsigned int from,
unsigned int to, unsigned int arg)
{
--
1.6.6.1