2010-07-30 15:49:18

by Ai Li

[permalink] [raw]
Subject: [PATCH v3] cpuidle: extend cpuidle and menu governor to handle dynamic states

On some SoC chips, HW resources may be in use during any particular idle
period. As a consequence, the cpuidle states that the SoC is safe to
enter can change from idle period to idle period. In addition, the
latency and threshold of each cpuidle state can vary, depending on the
operating condition when the CPU becomes idle, e.g. the current cpu
frequency, the current state of the HW blocks, etc.

cpuidle core and the menu governor, in the current form, are geared
towards cpuidle states that are static, i.e. the availabiltiy of the
states, their latencies, their thresholds are non-changing during run
time. cpuidle does not provide any hook that cpuidle drivers can use
to adjust those values on the fly for the current idle period before the
menu governor selects the target cpuidle state.

This patch extends cpuidle core and the menu governor to handle states
that are dynamic. There are three additions in the patch and the patch
maintains backwards-compatibility with existing cpuidle drivers.

1) add prepare() to struct cpuidle_device. A cpuidle driver can hook
into the callback and cpuidle will call prepare() before calling the
governor's select function. The callback gives the cpuidle driver a
chance to update the dynamic information of the cpuidle states for the
current idle period, e.g. state availability, latencies, thresholds,
power values, etc.

2) add CPUIDLE_FLAG_IGNORE as one of the state flags. In the prepare()
function, a cpuidle driver can set/clear the flag to indicate to the
menu governor whether a cpuidle state should be ignored, i.e. not
available, during the current idle period.

3) add power_specified bit to struct cpuidle_device. The menu governor
currently assumes that the cpuidle states are arranged in the order of
increasing latency, threshold, and power savings. This is true or can
be made true for static states. Once the state parameters are dynamic,
the latencies, thresholds, and power savings for the cpuidle states can
increase or decrease by different amounts from idle period to idle
period. So the assumption of increasing latency, threshold, and power
savings from Cn to C(n+1) can no longer be guaranteed.

It can be straight forward to calculate the power consumption of each
available state and to specify it in power_usage for the idle period.
Using the power_usage fields, the menu governor then selects the state
that has the lowest power consumption and that still satisfies all other
critieria. The power_specified bit defaults to 0. For existing cpuidle
drivers, cpuidle detects that power_specified is 0 and fills in a dummy
set of power_usage values.

Signed-off-by: Ai Li <[email protected]>
---
drivers/cpuidle/cpuidle.c | 31 +++++++++++++++++++++++++++++++
drivers/cpuidle/governors/menu.c | 23 ++++++++++++++++-------
include/linux/cpuidle.h | 4 ++++
3 files changed, 51 insertions(+), 7 deletions(-)

diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 1994885..c335d57 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -74,6 +74,17 @@ static void cpuidle_idle_call(void)
*/
hrtimer_peek_ahead_timers();
#endif
+
+ /*
+ * Call the device's prepare function before calling the
+ * governor's select function. ->prepare gives the device's
+ * cpuidle driver a chance to update any dynamic information
+ * of its cpuidle states for the current idle period, e.g.
+ * state availability, latencies, residencies, etc.
+ */
+ if (dev->prepare)
+ dev->prepare(dev);
+
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(dev);
if (need_resched()) {
@@ -282,6 +293,26 @@ static int __cpuidle_register_device(struct cpuidle_device *dev)

poll_idle_init(dev);

+ /*
+ * cpuidle driver should set the dev->power_specified bit
+ * before registering the device if the driver provides
+ * power_usage numbers.
+ *
+ * For those devices whose ->power_specified is not set,
+ * we fill in power_usage with decreasing values as the
+ * cpuidle code has an implicit assumption that state Cn
+ * uses less power than C(n-1).
+ *
+ * With CONFIG_ARCH_HAS_CPU_RELAX, C0 is already assigned
+ * an power value of -1. So we use -2, -3, etc, for other
+ * c-states.
+ */
+ if (!dev->power_specified) {
+ int i;
+ for (i = CPUIDLE_DRIVER_STATE_START; i < dev->state_count; i++)
+ dev->states[i].power_usage = -1 - i;
+ }
+
per_cpu(cpuidle_devices, dev->cpu) = dev;
list_add(&dev->device_list, &cpuidle_detected_devices);
if ((ret = cpuidle_add_sysfs(sys_dev))) {
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 1b12870..c2408bb 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -234,6 +234,7 @@ static int menu_select(struct cpuidle_device *dev)
{
struct menu_device *data = &__get_cpu_var(menu_devices);
int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY);
+ unsigned int power_usage = -1;
int i;
int multiplier;

@@ -278,19 +279,27 @@ static int menu_select(struct cpuidle_device *dev)
if (data->expected_us > 5)
data->last_state_idx = CPUIDLE_DRIVER_STATE_START;

-
- /* find the deepest idle state that satisfies our constraints */
+ /*
+ * Find the idle state with the lowest power while satisfying
+ * our constraints.
+ */
for (i = CPUIDLE_DRIVER_STATE_START; i < dev->state_count; i++) {
struct cpuidle_state *s = &dev->states[i];

+ if (s->flags & CPUIDLE_FLAG_IGNORE)
+ continue;
if (s->target_residency > data->predicted_us)
- break;
+ continue;
if (s->exit_latency > latency_req)
- break;
+ continue;
if (s->exit_latency * multiplier > data->predicted_us)
- break;
- data->exit_us = s->exit_latency;
- data->last_state_idx = i;
+ continue;
+
+ if (s->power_usage < power_usage) {
+ power_usage = s->power_usage;
+ data->last_state_idx = i;
+ data->exit_us = s->exit_latency;
+ }
}

return data->last_state_idx;
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 55215cc..36ca972 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -52,6 +52,7 @@ struct cpuidle_state {
#define CPUIDLE_FLAG_SHALLOW (0x20) /* low latency, minimal savings */
#define CPUIDLE_FLAG_BALANCED (0x40) /* medium latency, moderate savings */
#define CPUIDLE_FLAG_DEEP (0x80) /* high latency, large savings */
+#define CPUIDLE_FLAG_IGNORE (0x100) /* ignore during this idle period */

#define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000)

@@ -84,6 +85,7 @@ struct cpuidle_state_kobj {
struct cpuidle_device {
unsigned int registered:1;
unsigned int enabled:1;
+ unsigned int power_specified:1;
unsigned int cpu;

int last_residency;
@@ -97,6 +99,8 @@ struct cpuidle_device {
struct completion kobj_unregister;
void *governor_data;
struct cpuidle_state *safe_state;
+
+ int (*prepare) (struct cpuidle_device *dev);
};

DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
--
1.5.6.3

Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum


2010-12-16 06:58:16

by Yong Wang

[permalink] [raw]
Subject: Re: [PATCH v3] cpuidle: extend cpuidle and menu governor to handle dynamic states

On Fri, Jul 30, 2010 at 09:49:11AM -0600, Ai Li wrote:
> On some SoC chips, HW resources may be in use during any particular idle
> period. As a consequence, the cpuidle states that the SoC is safe to
> enter can change from idle period to idle period. In addition, the
> latency and threshold of each cpuidle state can vary, depending on the
> operating condition when the CPU becomes idle, e.g. the current cpu
> frequency, the current state of the HW blocks, etc.
>
> cpuidle core and the menu governor, in the current form, are geared
> towards cpuidle states that are static, i.e. the availabiltiy of the
> states, their latencies, their thresholds are non-changing during run
> time. cpuidle does not provide any hook that cpuidle drivers can use
> to adjust those values on the fly for the current idle period before the
> menu governor selects the target cpuidle state.
>
> This patch extends cpuidle core and the menu governor to handle states
> that are dynamic. There are three additions in the patch and the patch
> maintains backwards-compatibility with existing cpuidle drivers.
>
> 1) add prepare() to struct cpuidle_device. A cpuidle driver can hook
> into the callback and cpuidle will call prepare() before calling the
> governor's select function. The callback gives the cpuidle driver a
> chance to update the dynamic information of the cpuidle states for the
> current idle period, e.g. state availability, latencies, thresholds,
> power values, etc.
>

Could you please point me to some sample code regarding how to use this
'prepare' callback?

> +
> + /*
> + * Call the device's prepare function before calling the
> + * governor's select function. ->prepare gives the device's
> + * cpuidle driver a chance to update any dynamic information
> + * of its cpuidle states for the current idle period, e.g.
> + * state availability, latencies, residencies, etc.
> + */
> + if (dev->prepare)
> + dev->prepare(dev);
> +
> /* ask the governor for the next state */
> next_state = cpuidle_curr_governor->select(dev);

In terms of dynamic states, what if situation changes between the
'prepare' callback and the selected state is actually entered? Like a
particular state makes sense when 'prepare' is called but does not make
sense any more when cpuidle actually tries to enter that state?

Thanks
-Yong