Hello,
My system, when booted with recent kernels, fails to show any output
on the monitor. The problem occurs very early during bootup (I never
see anything after the messages from grub), the monitor indicates that
there is no video signal at all and dmesg shows the following lines:
[ 1.540465] usbhid: USB HID core driver
[ 2.490014] No connectors reported connected with modes
[ 2.490019] [drm] Cannot find any crtc or sizes - going 1024x768
[ 2.496064] Console: switching to colour frame buffer device 128x48
[ 2.497729] fb0: inteldrmfb frame buffer device
The machine seems fine otherwise: I can log in remotely and logging in
from the console (by typing blindly without visual feedback) also
works.
The problem is present in the current kernel as of this morning (I see
it with commit 55ec86f848a5f872fd43f5d7206464a0af419110). Bisection
indicates that it is caused by the following commit.
commit 541cc966915b6756e54c20eebe60ae957afdb537
Author: Chris Wilson <[email protected]>
Date: Mon Dec 6 11:24:07 2010 +0000
drm: Don't try and disable an encoder that was never enabled
Prevents code that assumes that the encoder is active when
asked to be disabled from dying a horrible death.
Reported-by: Daniel Vetter <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
I verfied that the problem disappears when booting recent kernels
(i.e. 55ec86f848a5f872fd43f5d7206464a0af419110) with the offending
commit reverted. The screen works again and the dmesg output now
changes to
[ 1.542515] usbhid: USB HID core driver
[ 1.547569] Console: switching to colour frame buffer device 210x65
[ 1.551558] fb0: inteldrmfb frame buffer device
Note that the one second wait which was present in the bad dmesg
has now disappeared.
System information:
ASUS P5KPL-AM mainboard (Intel G31 chipset)
Intel Core2 quad core CPU
Ubuntu 10.10
Appended files:
dmesg.bad: dmesg for 55ec86f848a5f872fd43f5d7206464a0af419110
dmesg.good: dmesg for 55ec86... with
541cc966915b6756e54c20eebe60ae957afdb537 reverted
lspci: "lspci -v" output (on a good kernel)
I'd be happy to send further information or to try patches etc.
I hope this helps,
Jochen
--
http://seehuhn.de/
Similar (or the same):
https://bugzilla.kernel.org/show_bug.cgi?id=25242
On poniedziałek, 20 grudnia 2010 o 15:06:16 Jochen Voss wrote:
> Hello,
>
> My system, when booted with recent kernels, fails to show any output
> on the monitor. The problem occurs very early during bootup (I never
> see anything after the messages from grub), the monitor indicates that
> there is no video signal at all and dmesg shows the following lines:
>
> [ 1.540465] usbhid: USB HID core driver
> [ 2.490014] No connectors reported connected with modes
> [ 2.490019] [drm] Cannot find any crtc or sizes - going 1024x768
> [ 2.496064] Console: switching to colour frame buffer device 128x48
> [ 2.497729] fb0: inteldrmfb frame buffer device
>
> The machine seems fine otherwise: I can log in remotely and logging in
> from the console (by typing blindly without visual feedback) also
> works.
>
> The problem is present in the current kernel as of this morning (I see
> it with commit 55ec86f848a5f872fd43f5d7206464a0af419110). Bisection
> indicates that it is caused by the following commit.
>
> commit 541cc966915b6756e54c20eebe60ae957afdb537
> Author: Chris Wilson <[email protected]>
> Date: Mon Dec 6 11:24:07 2010 +0000
>
> drm: Don't try and disable an encoder that was never enabled
>
> Prevents code that assumes that the encoder is active when
> asked to be disabled from dying a horrible death.
>
> Reported-by: Daniel Vetter <[email protected]>
> Signed-off-by: Chris Wilson <[email protected]>
> Signed-off-by: Dave Airlie <[email protected]>
>
> I verfied that the problem disappears when booting recent kernels
> (i.e. 55ec86f848a5f872fd43f5d7206464a0af419110) with the offending
> commit reverted. The screen works again and the dmesg output now
> changes to
>
> [ 1.542515] usbhid: USB HID core driver
> [ 1.547569] Console: switching to colour frame buffer device 210x65
> [ 1.551558] fb0: inteldrmfb frame buffer device
>
> Note that the one second wait which was present in the bad dmesg
> has now disappeared.
>
> System information:
>
> ASUS P5KPL-AM mainboard (Intel G31 chipset)
> Intel Core2 quad core CPU
> Ubuntu 10.10
>
> Appended files:
>
> dmesg.bad: dmesg for 55ec86f848a5f872fd43f5d7206464a0af419110
> dmesg.good: dmesg for 55ec86... with
> 541cc966915b6756e54c20eebe60ae957afdb537 reverted
> lspci: "lspci -v" output (on a good kernel)
>
> I'd be happy to send further information or to try patches etc.
>
> I hope this helps,
> Jochen
--
Maciej Rutecki
http://www.maciek.unixy.pl