2011-02-08 13:22:07

by Tobias Klauser

[permalink] [raw]
Subject: [PATCH v2] watchdog: Add driver for Altera Watchdog Timer

This driver adds support for the Altera Timer in the Watchdog Timer
configuration. This component is usually found on SOPC (System on
Programmable Chip) for Altera FPGAs.

Signed-off-by: Tobias Klauser <[email protected]>
---

Thanks a lot to Jamie Iles for reviewing the first submitted version of this
driver.

changes for v2:
- Get driver properties from devicetree (and document them), thus the
driver depends on OF
- Do not select WATCHDOG_NOWAYOUT, but instead implement a software
timer resetting the watchdog timer when the device is not open
- Only support a single instance of the watchdog, so the private data
can be kept in static data
- Use devm_* functions in altera_wdt_probe to simplify cleanup and
error handling
- Remove empty altera_wdt_shutdown function
- Add MODULE_LICENSE (GPL)

.../devicetree/bindings/watchdog/altera_wdt.txt | 7 +
drivers/watchdog/Kconfig | 8 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/altera_wdt.c | 310 ++++++++++++++++++++
4 files changed, 326 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/watchdog/altera_wdt.txt
create mode 100644 drivers/watchdog/altera_wdt.c

diff --git a/Documentation/devicetree/bindings/watchdog/altera_wdt.txt b/Documentation/devicetree/bindings/watchdog/altera_wdt.txt
new file mode 100644
index 0000000..16ac949
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/altera_wdt.txt
@@ -0,0 +1,7 @@
+Altera Watchdog Timer
+
+Required properties:
+- compatible : should be "ALTR,wdt-1.0"
+- clock-frequency : frequency of the clock input
+- timeout : load value of the timer (number of clock ticks until watchdog
+ resets)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index bd6a33d..ebcafb0 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -69,6 +69,14 @@ config WM8350_WATCHDOG
Support for the watchdog in the WM8350 AudioPlus PMIC. When
the watchdog triggers the system will be reset.

+config ALTERA_WDT
+ tristate "Altera Watchdog Timer"
+ depends on OF
+ help
+ Support for the Altera Timer in the Watchdog Timer configuration. This
+ component is found on SOPC (System on Programmable Chip) for Altera
+ FPGAs.
+
# ALPHA Architecture

# ARM Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index fd9c8c0..48a2167 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -153,4 +153,5 @@ obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
+obj-$(CONFIG_ALTERA_WDT) += altera_wdt.o
obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
diff --git a/drivers/watchdog/altera_wdt.c b/drivers/watchdog/altera_wdt.c
new file mode 100644
index 0000000..dbced1e
--- /dev/null
+++ b/drivers/watchdog/altera_wdt.c
@@ -0,0 +1,310 @@
+/*
+ * Driver for the Altera Watchdog Timer
+ *
+ * Copyright (C) 2011 Tobias Klauser <[email protected]>
+ * Copyright (C) 2005 Walter Goossens
+ *
+ * Originally based on wdt.c which is
+ *
+ * Copyright (C) 1995-1997 Alan Cox <[email protected]>
+ *
+ * Software timeout heartbeat code based on pika_wdt.c which is
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/of_platform.h>
+
+#define WATCHDOG_NAME "altera_wdt"
+
+/* Register offsets */
+#define ALTERA_WDT_STATUS 0x00
+#define ALTERA_WDT_CONTROL 0x04
+#define ALTERA_WDT_PERIODL 0x08
+#define ALTERA_WDT_PERIODH 0x0C
+
+#define ALTERA_WDT_RUN_BIT 0x04
+
+/* User land timeout */
+#define WDT_HEARTBEAT 15
+static int heartbeat = WDT_HEARTBEAT;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
+ "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+ "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static struct {
+ void __iomem *base;
+ unsigned long wdt_timeout; /* timeout of the hardware timer */
+
+ unsigned long next_heartbeat; /* the next_heartbeat for the timer */
+ unsigned long is_open;
+ char expect_close;
+ struct timer_list timer; /* software timer that pings the watchdog */
+} altera_wdt_priv;
+
+/*
+ * Start the watchdog. Once it has been started, it cannot be stopped anymore.
+ */
+static int altera_wdt_setup(void)
+{
+ u32 control = readl(altera_wdt_priv.base + ALTERA_WDT_CONTROL);
+
+ writel(control | ALTERA_WDT_RUN_BIT, altera_wdt_priv.base + ALTERA_WDT_CONTROL);
+ return 0;
+}
+
+/*
+ * Tickle the watchdog (reset the watchdog timer)
+ */
+static void altera_wdt_reset(void)
+{
+ /* It doesn't matter what value we write */
+ writel(1, altera_wdt_priv.base + ALTERA_WDT_PERIODL);
+}
+
+/*
+ * Software timer tick
+ */
+static void altera_wdt_ping(unsigned long data)
+{
+ if (time_before(jiffies, altera_wdt_priv.next_heartbeat) ||
+ (!nowayout && !altera_wdt_priv.is_open)) {
+ altera_wdt_reset();
+ mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
+ } else
+ pr_crit(WATCHDOG_NAME ": I will reset your machine!\n");
+}
+
+static void altera_wdt_keepalive(void)
+{
+ altera_wdt_priv.next_heartbeat = jiffies + heartbeat * HZ;
+}
+
+static void altera_wdt_start(void)
+{
+ altera_wdt_keepalive();
+ mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
+}
+
+static int altera_wdt_open(struct inode *inode, struct file *file)
+{
+ /* /dev/watchdog can only be opened once */
+ if (test_and_set_bit(0, &altera_wdt_priv.is_open))
+ return -EBUSY;
+
+ altera_wdt_start();
+
+ return nonseekable_open(inode, file);
+}
+
+static int altera_wdt_release(struct inode *inode, struct file *file)
+{
+ /* stop internal ping */
+ if (!altera_wdt_priv.expect_close)
+ del_timer(&altera_wdt_priv.timer);
+
+ clear_bit(0, &altera_wdt_priv.is_open);
+ altera_wdt_priv.expect_close = 0;
+
+ return 0;
+}
+
+static ssize_t altera_wdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ if (!len)
+ return 0;
+
+ /* Scan for magic character */
+ if (!nowayout) {
+ size_t i;
+
+ altera_wdt_priv.expect_close = 0;
+
+ for (i = 0; i < len; i++) {
+ char c;
+ if (get_user(c, data + i))
+ return -EFAULT;
+ if (c == 'V') {
+ altera_wdt_priv.expect_close = 42;
+ break;
+ }
+ }
+ }
+
+ altera_wdt_keepalive();
+
+ return len;
+}
+
+static const struct watchdog_info altera_wdt_info = {
+ .identity = "Altera Watchdog",
+ .options = WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+ .firmware_version = 1,
+};
+
+static long altera_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ void __user *argp = (void __user *) arg;
+ int __user *p = argp;
+ int new_value;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &altera_wdt_info, sizeof(altera_wdt_info));
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_KEEPALIVE:
+ altera_wdt_keepalive();
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_value, p))
+ return -EFAULT;
+
+ heartbeat = new_value;
+ altera_wdt_keepalive();
+
+ return put_user(new_value, p); /* return current value */
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(heartbeat, p);
+
+ default:
+ return -ENOTTY;
+ }
+}
+
+static const struct file_operations altera_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .open = altera_wdt_open,
+ .release = altera_wdt_release,
+ .write = altera_wdt_write,
+ .unlocked_ioctl = altera_wdt_ioctl,
+};
+
+static struct miscdevice altera_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &altera_wdt_fops,
+};
+
+static int __devinit altera_wdt_probe(struct platform_device *pdev)
+{
+ struct resource *res, *mem;
+ const u32 *freq_prop, *timeout_prop;
+ unsigned long timeout;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENOENT;
+
+ mem = devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), pdev->name);
+ if (!mem)
+ return -EBUSY;
+
+ altera_wdt_priv.base = devm_ioremap_nocache(&pdev->dev, mem->start,
+ resource_size(mem));
+ if (!altera_wdt_priv.base)
+ return -ENOMEM;
+
+ freq_prop = of_get_property(pdev->dev.of_node, "clock-frequency", NULL);
+ if (!freq_prop)
+ return -ENODEV;
+
+ timeout_prop = of_get_property(pdev->dev.of_node, "timeout", NULL);
+ if (!timeout_prop)
+ return -ENODEV;
+
+ /* Add 1 as the timeout property actually holds the load value */
+ timeout = be32_to_cpup(timeout_prop) + 1;
+ /* Convert timeout to msecs */
+ timeout = timeout / (be32_to_cpup(freq_prop) / MSEC_PER_SEC);
+ /* Tickle the watchdog twice per timeout period */
+ altera_wdt_priv.wdt_timeout = msecs_to_jiffies(timeout / 2);
+
+ ret = misc_register(&altera_wdt_miscdev);
+ if (ret)
+ return ret;
+
+ altera_wdt_setup();
+ altera_wdt_priv.next_heartbeat = jiffies + heartbeat * HZ;
+ setup_timer(&altera_wdt_priv.timer, altera_wdt_ping, 0);
+ mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
+
+ pr_info(WATCHDOG_NAME " enabled (heartbeat=%d sec, nowayout=%d)\n",
+ heartbeat, nowayout);
+
+ return 0;
+}
+
+static int __devexit altera_wdt_remove(struct platform_device *pdev)
+{
+ misc_deregister(&altera_wdt_miscdev);
+ return 0;
+}
+
+static struct of_device_id altera_wdt_match[] = {
+ { .compatible = "ALTR,wdt-1.0", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, altera_wdt_match);
+
+static struct platform_driver altera_wdt_driver = {
+ .probe = altera_wdt_probe,
+ .remove = __devexit_p(altera_wdt_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = WATCHDOG_NAME,
+ .of_match_table = altera_wdt_match,
+ },
+};
+
+static int __init altera_wdt_init(void)
+{
+ return platform_driver_register(&altera_wdt_driver);
+}
+
+static void __exit altera_wdt_exit(void)
+{
+ platform_driver_unregister(&altera_wdt_driver);
+}
+
+module_init(altera_wdt_init);
+module_exit(altera_wdt_exit);
+
+MODULE_AUTHOR("Walter Goossens, Tobias Klauser <[email protected]>");
+MODULE_DESCRIPTION("Driver for Altera Watchdog Timer");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:" WATCHDOG_NAME);
--
1.7.0.4


2011-02-08 17:14:01

by Jamie Iles

[permalink] [raw]
Subject: Re: [PATCH v2] watchdog: Add driver for Altera Watchdog Timer

Hi Tobias,

One very pedantic comment, otherwise looks great!

On Tue, Feb 08, 2011 at 02:22:02PM +0100, Tobias Klauser wrote:
> This driver adds support for the Altera Timer in the Watchdog Timer
> configuration. This component is usually found on SOPC (System on
> Programmable Chip) for Altera FPGAs.
>
> Signed-off-by: Tobias Klauser <[email protected]>

Reviewed-by: Jamie Iles <[email protected]>.

> ---
>
> Thanks a lot to Jamie Iles for reviewing the first submitted version of this
> driver.
>
> changes for v2:
> - Get driver properties from devicetree (and document them), thus the
> driver depends on OF
> - Do not select WATCHDOG_NOWAYOUT, but instead implement a software
> timer resetting the watchdog timer when the device is not open
> - Only support a single instance of the watchdog, so the private data
> can be kept in static data
> - Use devm_* functions in altera_wdt_probe to simplify cleanup and
> error handling
> - Remove empty altera_wdt_shutdown function
> - Add MODULE_LICENSE (GPL)
>
> .../devicetree/bindings/watchdog/altera_wdt.txt | 7 +
> drivers/watchdog/Kconfig | 8 +
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/altera_wdt.c | 310 ++++++++++++++++++++
> 4 files changed, 326 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/watchdog/altera_wdt.txt
> create mode 100644 drivers/watchdog/altera_wdt.c
>
> diff --git a/Documentation/devicetree/bindings/watchdog/altera_wdt.txt b/Documentation/devicetree/bindings/watchdog/altera_wdt.txt
> new file mode 100644
> index 0000000..16ac949
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/altera_wdt.txt
> @@ -0,0 +1,7 @@
> +Altera Watchdog Timer
> +
> +Required properties:
> +- compatible : should be "ALTR,wdt-1.0"
> +- clock-frequency : frequency of the clock input
> +- timeout : load value of the timer (number of clock ticks until watchdog
> + resets)
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index bd6a33d..ebcafb0 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -69,6 +69,14 @@ config WM8350_WATCHDOG
> Support for the watchdog in the WM8350 AudioPlus PMIC. When
> the watchdog triggers the system will be reset.
>
> +config ALTERA_WDT
> + tristate "Altera Watchdog Timer"
> + depends on OF
> + help
> + Support for the Altera Timer in the Watchdog Timer configuration. This
> + component is found on SOPC (System on Programmable Chip) for Altera
> + FPGAs.
> +
> # ALPHA Architecture
>
> # ARM Architecture
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index fd9c8c0..48a2167 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -153,4 +153,5 @@ obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
> obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
> obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
> obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
> +obj-$(CONFIG_ALTERA_WDT) += altera_wdt.o
> obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
> diff --git a/drivers/watchdog/altera_wdt.c b/drivers/watchdog/altera_wdt.c
> new file mode 100644
> index 0000000..dbced1e
> --- /dev/null
> +++ b/drivers/watchdog/altera_wdt.c
> @@ -0,0 +1,310 @@
> +/*
> + * Driver for the Altera Watchdog Timer
> + *
> + * Copyright (C) 2011 Tobias Klauser <[email protected]>
> + * Copyright (C) 2005 Walter Goossens
> + *
> + * Originally based on wdt.c which is
> + *
> + * Copyright (C) 1995-1997 Alan Cox <[email protected]>
> + *
> + * Software timeout heartbeat code based on pika_wdt.c which is
> + *
> + * Copyright (c) 2008 PIKA Technologies
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/miscdevice.h>
> +#include <linux/watchdog.h>
> +#include <linux/platform_device.h>
> +#include <linux/fs.h>
> +#include <linux/init.h>
> +#include <linux/jiffies.h>
> +#include <linux/timer.h>
> +#include <linux/io.h>
> +#include <linux/uaccess.h>
> +#include <linux/of_platform.h>
> +
> +#define WATCHDOG_NAME "altera_wdt"
> +
> +/* Register offsets */
> +#define ALTERA_WDT_STATUS 0x00
> +#define ALTERA_WDT_CONTROL 0x04
> +#define ALTERA_WDT_PERIODL 0x08
> +#define ALTERA_WDT_PERIODH 0x0C
> +
> +#define ALTERA_WDT_RUN_BIT 0x04
> +
> +/* User land timeout */
> +#define WDT_HEARTBEAT 15
> +static int heartbeat = WDT_HEARTBEAT;
> +module_param(heartbeat, int, 0);
> +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
> + "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
> +
> +static int nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, int, 0);
> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
> + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +static struct {
> + void __iomem *base;
> + unsigned long wdt_timeout; /* timeout of the hardware timer */
> +
> + unsigned long next_heartbeat; /* the next_heartbeat for the timer */
> + unsigned long is_open;
> + char expect_close;
> + struct timer_list timer; /* software timer that pings the watchdog */
> +} altera_wdt_priv;
> +
> +/*
> + * Start the watchdog. Once it has been started, it cannot be stopped anymore.
> + */
> +static int altera_wdt_setup(void)
> +{
> + u32 control = readl(altera_wdt_priv.base + ALTERA_WDT_CONTROL);
> +
> + writel(control | ALTERA_WDT_RUN_BIT, altera_wdt_priv.base + ALTERA_WDT_CONTROL);
> + return 0;
> +}

Looks like this could be made static void.

Jamie

2011-02-08 22:54:41

by Walter Goossens

[permalink] [raw]
Subject: Re: [Nios2-dev] [PATCH v2] watchdog: Add driver for Altera Watchdog Timer

Hi Tobias,

One small remark below, looks ok otherwise.
Thanks for the work you put into this!

On 2/8/11 2:22 PM, Tobias Klauser wrote:
[...]
> +static struct miscdevice altera_wdt_miscdev = {
> + .minor = WATCHDOG_MINOR,
> + .name = "watchdog",
> + .fops =&altera_wdt_fops,
> +};
> +
> +static int __devinit altera_wdt_probe(struct platform_device *pdev)
> +{
> + struct resource *res, *mem;
> + const u32 *freq_prop, *timeout_prop;
Type should be const __be32 * here.
> + unsigned long timeout;
> + int ret;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res)
> + return -ENOENT;
> +
> + mem = devm_request_mem_region(&pdev->dev, res->start,
> + resource_size(res), pdev->name);
> + if (!mem)
> + return -EBUSY;
> +
> + altera_wdt_priv.base = devm_ioremap_nocache(&pdev->dev, mem->start,
> + resource_size(mem));
> + if (!altera_wdt_priv.base)
> + return -ENOMEM;
> +
> + freq_prop = of_get_property(pdev->dev.of_node, "clock-frequency", NULL);
> + if (!freq_prop)
> + return -ENODEV;
> +
> + timeout_prop = of_get_property(pdev->dev.of_node, "timeout", NULL);
> + if (!timeout_prop)
> + return -ENODEV;
> +
> + /* Add 1 as the timeout property actually holds the load value */
> + timeout = be32_to_cpup(timeout_prop) + 1;
> + /* Convert timeout to msecs */
> + timeout = timeout / (be32_to_cpup(freq_prop) / MSEC_PER_SEC);
> + /* Tickle the watchdog twice per timeout period */
> + altera_wdt_priv.wdt_timeout = msecs_to_jiffies(timeout / 2);
> +
> + ret = misc_register(&altera_wdt_miscdev);
> + if (ret)
> + return ret;
> +
> + altera_wdt_setup();
> + altera_wdt_priv.next_heartbeat = jiffies + heartbeat * HZ;
> + setup_timer(&altera_wdt_priv.timer, altera_wdt_ping, 0);
> + mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
> +
> + pr_info(WATCHDOG_NAME " enabled (heartbeat=%d sec, nowayout=%d)\n",
> + heartbeat, nowayout);
> +
> + return 0;
> +}
> +
> +static int __devexit altera_wdt_remove(struct platform_device *pdev)
> +{
> + misc_deregister(&altera_wdt_miscdev);
> + return 0;
> +}
> +
> +static struct of_device_id altera_wdt_match[] = {
> + { .compatible = "ALTR,wdt-1.0", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, altera_wdt_match);
> +
> +static struct platform_driver altera_wdt_driver = {
> + .probe = altera_wdt_probe,
> + .remove = __devexit_p(altera_wdt_remove),
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = WATCHDOG_NAME,
> + .of_match_table = altera_wdt_match,
> + },
> +};
> +
> +static int __init altera_wdt_init(void)
> +{
> + return platform_driver_register(&altera_wdt_driver);
> +}
> +
> +static void __exit altera_wdt_exit(void)
> +{
> + platform_driver_unregister(&altera_wdt_driver);
> +}
> +
> +module_init(altera_wdt_init);
> +module_exit(altera_wdt_exit);
> +
> +MODULE_AUTHOR("Walter Goossens, Tobias Klauser<[email protected]>");
> +MODULE_DESCRIPTION("Driver for Altera Watchdog Timer");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
> +MODULE_ALIAS("platform:" WATCHDOG_NAME);

2011-02-09 07:19:16

by Tobias Klauser

[permalink] [raw]
Subject: [PATCH v3] watchdog: Add driver for Altera Watchdog Timer

This driver adds support for the Altera Timer in the Watchdog Timer
configuration. This component is usually found on SOPC (System on
Programmable Chip) for Altera FPGAs.

Signed-off-by: Tobias Klauser <[email protected]>
Reviewed-by: Jamie Iles <[email protected]>
---
Thanks a lot to Jamie Iles and Walter Goossens for their feedback on v2.

changes for v3:
- Make altera_wdt_setup static void (as suggested by Jamie)
- Use const __be32 * for devicetree properties (as suggested by Walter)
changes for v2:
- Get driver properties from devicetree (and document them), thus the
driver depends on OF
- Do not select WATCHDOG_NOWAYOUT, but instead implement a software
timer resetting the watchdog timer when the device is not open
- Only support a single instance of the watchdog, so the private data
can be kept in static data
- Use devm_* functions in altera_wdt_probe to simplify cleanup and
error handling
- Remove empty altera_wdt_shutdown function
- Add MODULE_LICENSE (GPL)


.../devicetree/bindings/watchdog/altera_wdt.txt | 7 +
drivers/watchdog/Kconfig | 8 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/altera_wdt.c | 309 ++++++++++++++++++++
4 files changed, 325 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/watchdog/altera_wdt.txt
create mode 100644 drivers/watchdog/altera_wdt.c

diff --git a/Documentation/devicetree/bindings/watchdog/altera_wdt.txt b/Documentation/devicetree/bindings/watchdog/altera_wdt.txt
new file mode 100644
index 0000000..16ac949
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/altera_wdt.txt
@@ -0,0 +1,7 @@
+Altera Watchdog Timer
+
+Required properties:
+- compatible : should be "ALTR,wdt-1.0"
+- clock-frequency : frequency of the clock input
+- timeout : load value of the timer (number of clock ticks until watchdog
+ resets)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index bd6a33d..ebcafb0 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -69,6 +69,14 @@ config WM8350_WATCHDOG
Support for the watchdog in the WM8350 AudioPlus PMIC. When
the watchdog triggers the system will be reset.

+config ALTERA_WDT
+ tristate "Altera Watchdog Timer"
+ depends on OF
+ help
+ Support for the Altera Timer in the Watchdog Timer configuration. This
+ component is found on SOPC (System on Programmable Chip) for Altera
+ FPGAs.
+
# ALPHA Architecture

# ARM Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index fd9c8c0..48a2167 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -153,4 +153,5 @@ obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
+obj-$(CONFIG_ALTERA_WDT) += altera_wdt.o
obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
diff --git a/drivers/watchdog/altera_wdt.c b/drivers/watchdog/altera_wdt.c
new file mode 100644
index 0000000..2a7f14a
--- /dev/null
+++ b/drivers/watchdog/altera_wdt.c
@@ -0,0 +1,309 @@
+/*
+ * Driver for the Altera Watchdog Timer
+ *
+ * Copyright (C) 2011 Tobias Klauser <[email protected]>
+ * Copyright (C) 2005 Walter Goossens
+ *
+ * Originally based on wdt.c which is
+ *
+ * Copyright (C) 1995-1997 Alan Cox <[email protected]>
+ *
+ * Software timeout heartbeat code based on pika_wdt.c which is
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/of_platform.h>
+
+#define WATCHDOG_NAME "altera_wdt"
+
+/* Register offsets */
+#define ALTERA_WDT_STATUS 0x00
+#define ALTERA_WDT_CONTROL 0x04
+#define ALTERA_WDT_PERIODL 0x08
+#define ALTERA_WDT_PERIODH 0x0C
+
+#define ALTERA_WDT_RUN_BIT 0x04
+
+/* User land timeout */
+#define WDT_HEARTBEAT 15
+static int heartbeat = WDT_HEARTBEAT;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
+ "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+ "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static struct {
+ void __iomem *base;
+ unsigned long wdt_timeout; /* timeout of the hardware timer */
+
+ unsigned long next_heartbeat; /* the next_heartbeat for the timer */
+ unsigned long is_open;
+ char expect_close;
+ struct timer_list timer; /* software timer that pings the watchdog */
+} altera_wdt_priv;
+
+/*
+ * Start the watchdog. Once it has been started, it cannot be stopped anymore.
+ */
+static void altera_wdt_setup(void)
+{
+ u32 control = readl(altera_wdt_priv.base + ALTERA_WDT_CONTROL);
+
+ writel(control | ALTERA_WDT_RUN_BIT, altera_wdt_priv.base + ALTERA_WDT_CONTROL);
+}
+
+/*
+ * Tickle the watchdog (reset the watchdog timer)
+ */
+static void altera_wdt_reset(void)
+{
+ /* It doesn't matter what value we write */
+ writel(1, altera_wdt_priv.base + ALTERA_WDT_PERIODL);
+}
+
+/*
+ * Software timer tick
+ */
+static void altera_wdt_ping(unsigned long data)
+{
+ if (time_before(jiffies, altera_wdt_priv.next_heartbeat) ||
+ (!nowayout && !altera_wdt_priv.is_open)) {
+ altera_wdt_reset();
+ mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
+ } else
+ pr_crit(WATCHDOG_NAME ": I will reset your machine!\n");
+}
+
+static void altera_wdt_keepalive(void)
+{
+ altera_wdt_priv.next_heartbeat = jiffies + heartbeat * HZ;
+}
+
+static void altera_wdt_start(void)
+{
+ altera_wdt_keepalive();
+ mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
+}
+
+static int altera_wdt_open(struct inode *inode, struct file *file)
+{
+ /* /dev/watchdog can only be opened once */
+ if (test_and_set_bit(0, &altera_wdt_priv.is_open))
+ return -EBUSY;
+
+ altera_wdt_start();
+
+ return nonseekable_open(inode, file);
+}
+
+static int altera_wdt_release(struct inode *inode, struct file *file)
+{
+ /* stop internal ping */
+ if (!altera_wdt_priv.expect_close)
+ del_timer(&altera_wdt_priv.timer);
+
+ clear_bit(0, &altera_wdt_priv.is_open);
+ altera_wdt_priv.expect_close = 0;
+
+ return 0;
+}
+
+static ssize_t altera_wdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ if (!len)
+ return 0;
+
+ /* Scan for magic character */
+ if (!nowayout) {
+ size_t i;
+
+ altera_wdt_priv.expect_close = 0;
+
+ for (i = 0; i < len; i++) {
+ char c;
+ if (get_user(c, data + i))
+ return -EFAULT;
+ if (c == 'V') {
+ altera_wdt_priv.expect_close = 42;
+ break;
+ }
+ }
+ }
+
+ altera_wdt_keepalive();
+
+ return len;
+}
+
+static const struct watchdog_info altera_wdt_info = {
+ .identity = "Altera Watchdog",
+ .options = WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+ .firmware_version = 1,
+};
+
+static long altera_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ void __user *argp = (void __user *) arg;
+ int __user *p = argp;
+ int new_value;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &altera_wdt_info, sizeof(altera_wdt_info));
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_KEEPALIVE:
+ altera_wdt_keepalive();
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_value, p))
+ return -EFAULT;
+
+ heartbeat = new_value;
+ altera_wdt_keepalive();
+
+ return put_user(new_value, p); /* return current value */
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(heartbeat, p);
+
+ default:
+ return -ENOTTY;
+ }
+}
+
+static const struct file_operations altera_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .open = altera_wdt_open,
+ .release = altera_wdt_release,
+ .write = altera_wdt_write,
+ .unlocked_ioctl = altera_wdt_ioctl,
+};
+
+static struct miscdevice altera_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &altera_wdt_fops,
+};
+
+static int __devinit altera_wdt_probe(struct platform_device *pdev)
+{
+ struct resource *res, *mem;
+ const __be32 *freq_prop, *timeout_prop;
+ unsigned long timeout;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENOENT;
+
+ mem = devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), pdev->name);
+ if (!mem)
+ return -EBUSY;
+
+ altera_wdt_priv.base = devm_ioremap_nocache(&pdev->dev, mem->start,
+ resource_size(mem));
+ if (!altera_wdt_priv.base)
+ return -ENOMEM;
+
+ freq_prop = of_get_property(pdev->dev.of_node, "clock-frequency", NULL);
+ if (!freq_prop)
+ return -ENODEV;
+
+ timeout_prop = of_get_property(pdev->dev.of_node, "timeout", NULL);
+ if (!timeout_prop)
+ return -ENODEV;
+
+ /* Add 1 as the timeout property actually holds the load value */
+ timeout = be32_to_cpup(timeout_prop) + 1;
+ /* Convert timeout to msecs */
+ timeout = timeout / (be32_to_cpup(freq_prop) / MSEC_PER_SEC);
+ /* Tickle the watchdog twice per timeout period */
+ altera_wdt_priv.wdt_timeout = msecs_to_jiffies(timeout / 2);
+
+ ret = misc_register(&altera_wdt_miscdev);
+ if (ret)
+ return ret;
+
+ altera_wdt_setup();
+ altera_wdt_priv.next_heartbeat = jiffies + heartbeat * HZ;
+ setup_timer(&altera_wdt_priv.timer, altera_wdt_ping, 0);
+ mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
+
+ pr_info(WATCHDOG_NAME " enabled (heartbeat=%d sec, nowayout=%d)\n",
+ heartbeat, nowayout);
+
+ return 0;
+}
+
+static int __devexit altera_wdt_remove(struct platform_device *pdev)
+{
+ misc_deregister(&altera_wdt_miscdev);
+ return 0;
+}
+
+static struct of_device_id altera_wdt_match[] = {
+ { .compatible = "altr,wdt-1.0", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, altera_wdt_match);
+
+static struct platform_driver altera_wdt_driver = {
+ .probe = altera_wdt_probe,
+ .remove = __devexit_p(altera_wdt_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = WATCHDOG_NAME,
+ .of_match_table = altera_wdt_match,
+ },
+};
+
+static int __init altera_wdt_init(void)
+{
+ return platform_driver_register(&altera_wdt_driver);
+}
+
+static void __exit altera_wdt_exit(void)
+{
+ platform_driver_unregister(&altera_wdt_driver);
+}
+
+module_init(altera_wdt_init);
+module_exit(altera_wdt_exit);
+
+MODULE_AUTHOR("Walter Goossens, Tobias Klauser <[email protected]>");
+MODULE_DESCRIPTION("Driver for Altera Watchdog Timer");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:" WATCHDOG_NAME);
--
1.7.0.4

2011-02-09 07:56:51

by Belisko Marek

[permalink] [raw]
Subject: Re: [PATCH v3] watchdog: Add driver for Altera Watchdog Timer

On Wed, Feb 9, 2011 at 8:19 AM, Tobias Klauser <[email protected]> wrote:
> This driver adds support for the Altera Timer in the Watchdog Timer
> configuration. This component is usually found on SOPC (System on
> Programmable Chip) for Altera FPGAs.
>
> Signed-off-by: Tobias Klauser <[email protected]>
> Reviewed-by: Jamie Iles <[email protected]>
> ---
> Thanks a lot to Jamie Iles and Walter Goossens for their feedback on v2.
>
> changes for v3:
>  - Make altera_wdt_setup static void (as suggested by Jamie)
>  - Use const __be32 * for devicetree properties (as suggested by Walter)
> changes for v2:
>  - Get driver properties from devicetree (and document them), thus the
>   driver depends on OF
>  - Do not select WATCHDOG_NOWAYOUT, but instead implement a software
>   timer resetting the watchdog timer when the device is not open
>  - Only support a single instance of the watchdog, so the private data
>   can be kept in static data
>  - Use devm_* functions in altera_wdt_probe to simplify cleanup and
>   error handling
>  - Remove empty altera_wdt_shutdown function
>  - Add MODULE_LICENSE (GPL)
>
>
>  .../devicetree/bindings/watchdog/altera_wdt.txt    |    7 +
>  drivers/watchdog/Kconfig                           |    8 +
>  drivers/watchdog/Makefile                          |    1 +
>  drivers/watchdog/altera_wdt.c                      |  309 ++++++++++++++++++++
>  4 files changed, 325 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/altera_wdt.txt
>  create mode 100644 drivers/watchdog/altera_wdt.c
>
> diff --git a/Documentation/devicetree/bindings/watchdog/altera_wdt.txt b/Documentation/devicetree/bindings/watchdog/altera_wdt.txt
> new file mode 100644
> index 0000000..16ac949
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/altera_wdt.txt
> @@ -0,0 +1,7 @@
> +Altera Watchdog Timer
> +
> +Required properties:
> +- compatible : should be "ALTR,wdt-1.0"
> +- clock-frequency : frequency of the clock input
> +- timeout : load value of the timer (number of clock ticks until watchdog
> +            resets)
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index bd6a33d..ebcafb0 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -69,6 +69,14 @@ config WM8350_WATCHDOG
>          Support for the watchdog in the WM8350 AudioPlus PMIC.  When
>          the watchdog triggers the system will be reset.
>
> +config ALTERA_WDT
> +       tristate "Altera Watchdog Timer"
> +       depends on OF
> +       help
> +         Support for the Altera Timer in the Watchdog Timer configuration. This
> +         component is found on SOPC (System on Programmable Chip) for Altera
> +         FPGAs.
> +
>  # ALPHA Architecture
>
>  # ARM Architecture
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index fd9c8c0..48a2167 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -153,4 +153,5 @@ obj-$(CONFIG_WATCHDOG_CP1XXX)               += cpwd.o
>  obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
>  obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
>  obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
> +obj-$(CONFIG_ALTERA_WDT) += altera_wdt.o
>  obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
> diff --git a/drivers/watchdog/altera_wdt.c b/drivers/watchdog/altera_wdt.c
> new file mode 100644
> index 0000000..2a7f14a
> --- /dev/null
> +++ b/drivers/watchdog/altera_wdt.c
> @@ -0,0 +1,309 @@
> +/*
> + * Driver for the Altera Watchdog Timer
> + *
> + * Copyright (C) 2011 Tobias Klauser <[email protected]>
> + * Copyright (C) 2005 Walter Goossens
> + *
> + * Originally based on wdt.c which is
> + *
> + * Copyright (C) 1995-1997 Alan Cox <[email protected]>
> + *
> + * Software timeout heartbeat code based on pika_wdt.c which is
> + *
> + * Copyright (c) 2008 PIKA Technologies
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/miscdevice.h>
> +#include <linux/watchdog.h>
> +#include <linux/platform_device.h>
> +#include <linux/fs.h>
> +#include <linux/init.h>
> +#include <linux/jiffies.h>
> +#include <linux/timer.h>
> +#include <linux/io.h>
> +#include <linux/uaccess.h>
> +#include <linux/of_platform.h>
> +
> +#define WATCHDOG_NAME  "altera_wdt"
> +
> +/* Register offsets */
> +#define ALTERA_WDT_STATUS      0x00
> +#define ALTERA_WDT_CONTROL     0x04
> +#define ALTERA_WDT_PERIODL     0x08
> +#define ALTERA_WDT_PERIODH     0x0C
> +
> +#define ALTERA_WDT_RUN_BIT     0x04
> +
> +/* User land timeout */
> +#define WDT_HEARTBEAT 15
> +static int heartbeat = WDT_HEARTBEAT;
> +module_param(heartbeat, int, 0);
> +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
> +       "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
> +
> +static int nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, int, 0);
> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
> +       "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +static struct {
> +       void __iomem *base;
> +       unsigned long wdt_timeout;      /* timeout of the hardware timer */
> +
> +       unsigned long next_heartbeat;   /* the next_heartbeat for the timer */
> +       unsigned long is_open;
> +       char expect_close;
> +       struct timer_list timer;        /* software timer that pings the watchdog */
> +} altera_wdt_priv;
> +
> +/*
> + * Start the watchdog. Once it has been started, it cannot be stopped anymore.
> + */
> +static void altera_wdt_setup(void)
> +{
> +       u32 control = readl(altera_wdt_priv.base + ALTERA_WDT_CONTROL);
> +
> +       writel(control | ALTERA_WDT_RUN_BIT, altera_wdt_priv.base + ALTERA_WDT_CONTROL);
> +}
> +
> +/*
> + * Tickle the watchdog (reset the watchdog timer)
> + */
> +static void altera_wdt_reset(void)
> +{
> +       /* It doesn't matter what value we write */
> +       writel(1, altera_wdt_priv.base + ALTERA_WDT_PERIODL);
> +}
> +
> +/*
> + * Software timer tick
> + */
> +static void altera_wdt_ping(unsigned long data)
> +{
> +       if (time_before(jiffies, altera_wdt_priv.next_heartbeat) ||
> +                       (!nowayout && !altera_wdt_priv.is_open)) {
> +               altera_wdt_reset();
> +               mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
> +       } else
> +               pr_crit(WATCHDOG_NAME ": I will reset your machine!\n");
> +}
> +
> +static void altera_wdt_keepalive(void)
> +{
> +       altera_wdt_priv.next_heartbeat = jiffies + heartbeat * HZ;
> +}
> +
> +static void altera_wdt_start(void)
> +{
> +       altera_wdt_keepalive();
> +       mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
> +}
> +
> +static int altera_wdt_open(struct inode *inode, struct file *file)
> +{
> +       /* /dev/watchdog can only be opened once */
> +       if (test_and_set_bit(0, &altera_wdt_priv.is_open))
> +               return -EBUSY;
> +
> +       altera_wdt_start();
> +
> +       return nonseekable_open(inode, file);
> +}
> +
> +static int altera_wdt_release(struct inode *inode, struct file *file)
> +{
> +       /* stop internal ping */
> +       if (!altera_wdt_priv.expect_close)
> +               del_timer(&altera_wdt_priv.timer);
> +
> +       clear_bit(0, &altera_wdt_priv.is_open);
> +       altera_wdt_priv.expect_close = 0;
> +
> +       return 0;
> +}
> +
> +static ssize_t altera_wdt_write(struct file *file, const char __user *data,
> +               size_t len, loff_t *ppos)
> +{
> +       if (!len)
> +               return 0;
> +
> +       /* Scan for magic character */
> +       if (!nowayout) {
> +               size_t i;
> +
> +               altera_wdt_priv.expect_close = 0;
> +
> +               for (i = 0; i < len; i++) {
> +                       char c;
> +                       if (get_user(c, data + i))
> +                               return -EFAULT;
> +                       if (c == 'V') {
> +                               altera_wdt_priv.expect_close = 42;
For what this value is used? Why 42? It's never checked in code to such a value.
> +                               break;
> +                       }
> +               }
> +       }
> +
> +       altera_wdt_keepalive();
> +
> +       return len;
> +}
> +
> +static const struct watchdog_info altera_wdt_info = {
> +       .identity               = "Altera Watchdog",
> +       .options                = WDIOF_SETTIMEOUT |
> +                                 WDIOF_KEEPALIVEPING |
> +                                 WDIOF_MAGICCLOSE,
> +       .firmware_version       = 1,
> +};
> +
> +static long altera_wdt_ioctl(struct file *file, unsigned int cmd,
> +               unsigned long arg)
> +{
> +       void __user *argp = (void __user *) arg;
> +       int __user *p = argp;
> +       int new_value;
> +
> +       switch (cmd) {
> +       case WDIOC_GETSUPPORT:
> +               return copy_to_user(argp, &altera_wdt_info, sizeof(altera_wdt_info));
> +
> +       case WDIOC_GETSTATUS:
> +       case WDIOC_GETBOOTSTATUS:
> +               return put_user(0, p);
> +
> +       case WDIOC_KEEPALIVE:
> +               altera_wdt_keepalive();
> +               return 0;
> +
> +       case WDIOC_SETTIMEOUT:
> +               if (get_user(new_value, p))
> +                       return -EFAULT;
> +
> +               heartbeat = new_value;
> +               altera_wdt_keepalive();
> +
> +               return put_user(new_value, p);  /* return current value */
> +
> +       case WDIOC_GETTIMEOUT:
> +               return put_user(heartbeat, p);
> +
> +       default:
> +               return -ENOTTY;
> +       }
> +}
> +
> +static const struct file_operations altera_wdt_fops = {
> +       .owner          = THIS_MODULE,
> +       .llseek         = no_llseek,
> +       .open           = altera_wdt_open,
> +       .release        = altera_wdt_release,
> +       .write          = altera_wdt_write,
> +       .unlocked_ioctl = altera_wdt_ioctl,
> +};
> +
> +static struct miscdevice altera_wdt_miscdev = {
> +       .minor  = WATCHDOG_MINOR,
> +       .name   = "watchdog",
> +       .fops   = &altera_wdt_fops,
> +};
> +
> +static int __devinit altera_wdt_probe(struct platform_device *pdev)
> +{
> +       struct resource *res, *mem;
> +       const __be32 *freq_prop, *timeout_prop;
> +       unsigned long timeout;
> +       int ret;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       if (!res)
> +               return -ENOENT;
> +
> +       mem = devm_request_mem_region(&pdev->dev, res->start,
> +                                     resource_size(res), pdev->name);
> +       if (!mem)
> +               return -EBUSY;
> +
> +       altera_wdt_priv.base = devm_ioremap_nocache(&pdev->dev, mem->start,
> +                                                   resource_size(mem));
> +       if (!altera_wdt_priv.base)
> +               return -ENOMEM;
> +
> +       freq_prop = of_get_property(pdev->dev.of_node, "clock-frequency", NULL);
> +       if (!freq_prop)
> +               return -ENODEV;
> +
> +       timeout_prop = of_get_property(pdev->dev.of_node, "timeout", NULL);
> +       if (!timeout_prop)
> +               return -ENODEV;
> +
> +       /* Add 1 as the timeout property actually holds the load value */
> +       timeout = be32_to_cpup(timeout_prop) + 1;
> +       /* Convert timeout to msecs */
> +       timeout = timeout / (be32_to_cpup(freq_prop) / MSEC_PER_SEC);
> +       /* Tickle the watchdog twice per timeout period */
> +       altera_wdt_priv.wdt_timeout = msecs_to_jiffies(timeout / 2);
> +
> +       ret = misc_register(&altera_wdt_miscdev);
> +       if (ret)
> +               return ret;
> +
> +       altera_wdt_setup();
> +       altera_wdt_priv.next_heartbeat = jiffies + heartbeat * HZ;
> +       setup_timer(&altera_wdt_priv.timer, altera_wdt_ping, 0);
> +       mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
> +
> +       pr_info(WATCHDOG_NAME " enabled (heartbeat=%d sec, nowayout=%d)\n",
> +               heartbeat, nowayout);
> +
> +       return 0;
> +}
> +
> +static int __devexit altera_wdt_remove(struct platform_device *pdev)
> +{
> +       misc_deregister(&altera_wdt_miscdev);
> +       return 0;
> +}
> +
> +static struct of_device_id altera_wdt_match[] = {
> +       { .compatible = "altr,wdt-1.0", },
> +       {},
> +};
> +MODULE_DEVICE_TABLE(of, altera_wdt_match);
> +
> +static struct platform_driver altera_wdt_driver = {
> +       .probe          = altera_wdt_probe,
> +       .remove         = __devexit_p(altera_wdt_remove),
> +       .driver         = {
> +               .owner          = THIS_MODULE,
> +               .name           = WATCHDOG_NAME,
> +               .of_match_table = altera_wdt_match,
> +       },
> +};
> +
> +static int __init altera_wdt_init(void)
> +{
> +       return platform_driver_register(&altera_wdt_driver);
> +}
> +
> +static void __exit altera_wdt_exit(void)
> +{
> +       platform_driver_unregister(&altera_wdt_driver);
> +}
> +
> +module_init(altera_wdt_init);
> +module_exit(altera_wdt_exit);
> +
> +MODULE_AUTHOR("Walter Goossens, Tobias Klauser <[email protected]>");
> +MODULE_DESCRIPTION("Driver for Altera Watchdog Timer");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
> +MODULE_ALIAS("platform:" WATCHDOG_NAME);
> --
> 1.7.0.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>

thanks,

marek

--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
icq: 290551086
web: http://open-nandra.com

2011-02-09 08:15:42

by Tobias Klauser

[permalink] [raw]
Subject: Re: [PATCH v3] watchdog: Add driver for Altera Watchdog Timer

On 2011-02-09 at 08:56:48 +0100, Belisko Marek <[email protected]> wrote:
> On Wed, Feb 9, 2011 at 8:19 AM, Tobias Klauser <[email protected]> wrote:
> > This driver adds support for the Altera Timer in the Watchdog Timer
> > configuration. This component is usually found on SOPC (System on
> > Programmable Chip) for Altera FPGAs.
> >
> > Signed-off-by: Tobias Klauser <[email protected]>
> > Reviewed-by: Jamie Iles <[email protected]>
> > ---
> > Thanks a lot to Jamie Iles and Walter Goossens for their feedback on v2.
> >
> > changes for v3:
> > ?- Make altera_wdt_setup static void (as suggested by Jamie)
> > ?- Use const __be32 * for devicetree properties (as suggested by Walter)
> > changes for v2:
> > ?- Get driver properties from devicetree (and document them), thus the
> > ? driver depends on OF
> > ?- Do not select WATCHDOG_NOWAYOUT, but instead implement a software
> > ? timer resetting the watchdog timer when the device is not open
> > ?- Only support a single instance of the watchdog, so the private data
> > ? can be kept in static data
> > ?- Use devm_* functions in altera_wdt_probe to simplify cleanup and
> > ? error handling
> > ?- Remove empty altera_wdt_shutdown function
> > ?- Add MODULE_LICENSE (GPL)
> >
> >
> > ?.../devicetree/bindings/watchdog/altera_wdt.txt ? ?| ? ?7 +
> > ?drivers/watchdog/Kconfig ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?8 +
> > ?drivers/watchdog/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?1 +
> > ?drivers/watchdog/altera_wdt.c ? ? ? ? ? ? ? ? ? ? ?| ?309 ++++++++++++++++++++
> > ?4 files changed, 325 insertions(+), 0 deletions(-)
> > ?create mode 100644 Documentation/devicetree/bindings/watchdog/altera_wdt.txt
> > ?create mode 100644 drivers/watchdog/altera_wdt.c
> >
> > diff --git a/Documentation/devicetree/bindings/watchdog/altera_wdt.txt b/Documentation/devicetree/bindings/watchdog/altera_wdt.txt
> > new file mode 100644
> > index 0000000..16ac949
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/watchdog/altera_wdt.txt
> > @@ -0,0 +1,7 @@
> > +Altera Watchdog Timer
> > +
> > +Required properties:
> > +- compatible : should be "ALTR,wdt-1.0"
> > +- clock-frequency : frequency of the clock input
> > +- timeout : load value of the timer (number of clock ticks until watchdog
> > + ? ? ? ? ? ?resets)
> > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> > index bd6a33d..ebcafb0 100644
> > --- a/drivers/watchdog/Kconfig
> > +++ b/drivers/watchdog/Kconfig
> > @@ -69,6 +69,14 @@ config WM8350_WATCHDOG
> > ? ? ? ? ?Support for the watchdog in the WM8350 AudioPlus PMIC. ?When
> > ? ? ? ? ?the watchdog triggers the system will be reset.
> >
> > +config ALTERA_WDT
> > + ? ? ? tristate "Altera Watchdog Timer"
> > + ? ? ? depends on OF
> > + ? ? ? help
> > + ? ? ? ? Support for the Altera Timer in the Watchdog Timer configuration. This
> > + ? ? ? ? component is found on SOPC (System on Programmable Chip) for Altera
> > + ? ? ? ? FPGAs.
> > +
> > ?# ALPHA Architecture
> >
> > ?# ARM Architecture
> > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> > index fd9c8c0..48a2167 100644
> > --- a/drivers/watchdog/Makefile
> > +++ b/drivers/watchdog/Makefile
> > @@ -153,4 +153,5 @@ obj-$(CONFIG_WATCHDOG_CP1XXX) ? ? ? ? ? ? ? += cpwd.o
> > ?obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
> > ?obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
> > ?obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
> > +obj-$(CONFIG_ALTERA_WDT) += altera_wdt.o
> > ?obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
> > diff --git a/drivers/watchdog/altera_wdt.c b/drivers/watchdog/altera_wdt.c
> > new file mode 100644
> > index 0000000..2a7f14a
> > --- /dev/null
> > +++ b/drivers/watchdog/altera_wdt.c
> > @@ -0,0 +1,309 @@
> > +/*
> > + * Driver for the Altera Watchdog Timer
> > + *
> > + * Copyright (C) 2011 Tobias Klauser <[email protected]>
> > + * Copyright (C) 2005 Walter Goossens
> > + *
> > + * Originally based on wdt.c which is
> > + *
> > + * Copyright (C) 1995-1997 Alan Cox <[email protected]>
> > + *
> > + * Software timeout heartbeat code based on pika_wdt.c which is
> > + *
> > + * Copyright (c) 2008 PIKA Technologies
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/kernel.h>
> > +#include <linux/miscdevice.h>
> > +#include <linux/watchdog.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/fs.h>
> > +#include <linux/init.h>
> > +#include <linux/jiffies.h>
> > +#include <linux/timer.h>
> > +#include <linux/io.h>
> > +#include <linux/uaccess.h>
> > +#include <linux/of_platform.h>
> > +
> > +#define WATCHDOG_NAME ?"altera_wdt"
> > +
> > +/* Register offsets */
> > +#define ALTERA_WDT_STATUS ? ? ?0x00
> > +#define ALTERA_WDT_CONTROL ? ? 0x04
> > +#define ALTERA_WDT_PERIODL ? ? 0x08
> > +#define ALTERA_WDT_PERIODH ? ? 0x0C
> > +
> > +#define ALTERA_WDT_RUN_BIT ? ? 0x04
> > +
> > +/* User land timeout */
> > +#define WDT_HEARTBEAT 15
> > +static int heartbeat = WDT_HEARTBEAT;
> > +module_param(heartbeat, int, 0);
> > +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
> > + ? ? ? "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
> > +
> > +static int nowayout = WATCHDOG_NOWAYOUT;
> > +module_param(nowayout, int, 0);
> > +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
> > + ? ? ? "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> > +
> > +static struct {
> > + ? ? ? void __iomem *base;
> > + ? ? ? unsigned long wdt_timeout; ? ? ?/* timeout of the hardware timer */
> > +
> > + ? ? ? unsigned long next_heartbeat; ? /* the next_heartbeat for the timer */
> > + ? ? ? unsigned long is_open;
> > + ? ? ? char expect_close;
> > + ? ? ? struct timer_list timer; ? ? ? ?/* software timer that pings the watchdog */
> > +} altera_wdt_priv;
> > +
> > +/*
> > + * Start the watchdog. Once it has been started, it cannot be stopped anymore.
> > + */
> > +static void altera_wdt_setup(void)
> > +{
> > + ? ? ? u32 control = readl(altera_wdt_priv.base + ALTERA_WDT_CONTROL);
> > +
> > + ? ? ? writel(control | ALTERA_WDT_RUN_BIT, altera_wdt_priv.base + ALTERA_WDT_CONTROL);
> > +}
> > +
> > +/*
> > + * Tickle the watchdog (reset the watchdog timer)
> > + */
> > +static void altera_wdt_reset(void)
> > +{
> > + ? ? ? /* It doesn't matter what value we write */
> > + ? ? ? writel(1, altera_wdt_priv.base + ALTERA_WDT_PERIODL);
> > +}
> > +
> > +/*
> > + * Software timer tick
> > + */
> > +static void altera_wdt_ping(unsigned long data)
> > +{
> > + ? ? ? if (time_before(jiffies, altera_wdt_priv.next_heartbeat) ||
> > + ? ? ? ? ? ? ? ? ? ? ? (!nowayout && !altera_wdt_priv.is_open)) {
> > + ? ? ? ? ? ? ? altera_wdt_reset();
> > + ? ? ? ? ? ? ? mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
> > + ? ? ? } else
> > + ? ? ? ? ? ? ? pr_crit(WATCHDOG_NAME ": I will reset your machine!\n");
> > +}
> > +
> > +static void altera_wdt_keepalive(void)
> > +{
> > + ? ? ? altera_wdt_priv.next_heartbeat = jiffies + heartbeat * HZ;
> > +}
> > +
> > +static void altera_wdt_start(void)
> > +{
> > + ? ? ? altera_wdt_keepalive();
> > + ? ? ? mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
> > +}
> > +
> > +static int altera_wdt_open(struct inode *inode, struct file *file)
> > +{
> > + ? ? ? /* /dev/watchdog can only be opened once */
> > + ? ? ? if (test_and_set_bit(0, &altera_wdt_priv.is_open))
> > + ? ? ? ? ? ? ? return -EBUSY;
> > +
> > + ? ? ? altera_wdt_start();
> > +
> > + ? ? ? return nonseekable_open(inode, file);
> > +}
> > +
> > +static int altera_wdt_release(struct inode *inode, struct file *file)
> > +{
> > + ? ? ? /* stop internal ping */
> > + ? ? ? if (!altera_wdt_priv.expect_close)
> > + ? ? ? ? ? ? ? del_timer(&altera_wdt_priv.timer);
> > +
> > + ? ? ? clear_bit(0, &altera_wdt_priv.is_open);
> > + ? ? ? altera_wdt_priv.expect_close = 0;
> > +
> > + ? ? ? return 0;
> > +}
> > +
> > +static ssize_t altera_wdt_write(struct file *file, const char __user *data,
> > + ? ? ? ? ? ? ? size_t len, loff_t *ppos)
> > +{
> > + ? ? ? if (!len)
> > + ? ? ? ? ? ? ? return 0;
> > +
> > + ? ? ? /* Scan for magic character */
> > + ? ? ? if (!nowayout) {
> > + ? ? ? ? ? ? ? size_t i;
> > +
> > + ? ? ? ? ? ? ? altera_wdt_priv.expect_close = 0;
> > +
> > + ? ? ? ? ? ? ? for (i = 0; i < len; i++) {
> > + ? ? ? ? ? ? ? ? ? ? ? char c;
> > + ? ? ? ? ? ? ? ? ? ? ? if (get_user(c, data + i))
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? return -EFAULT;
> > + ? ? ? ? ? ? ? ? ? ? ? if (c == 'V') {
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? altera_wdt_priv.expect_close = 42;
> For what this value is used? Why 42? It's never checked in code to such a value.

The value 42 is arbitrary, I used it because other watchdog drivers
implementing software timers to tickle the watchdog are using it that
way too. Its value is not explicitely checked for, it's only checked in
altera_wdt_release for being 0/not 0 to determine whether to stop the
software timer.

Thanks
Tobias

2011-02-12 09:42:42

by Grant Likely

[permalink] [raw]
Subject: Re: [PATCH v3] watchdog: Add driver for Altera Watchdog Timer

On Wed, Feb 09, 2011 at 08:19:12AM +0100, Tobias Klauser wrote:
> This driver adds support for the Altera Timer in the Watchdog Timer
> configuration. This component is usually found on SOPC (System on
> Programmable Chip) for Altera FPGAs.
>
> Signed-off-by: Tobias Klauser <[email protected]>
> Reviewed-by: Jamie Iles <[email protected]>

Acked-by: Grant Likely <[email protected]> for the devicetree binding.

g.

> ---
> Thanks a lot to Jamie Iles and Walter Goossens for their feedback on v2.
>
> changes for v3:
> - Make altera_wdt_setup static void (as suggested by Jamie)
> - Use const __be32 * for devicetree properties (as suggested by Walter)
> changes for v2:
> - Get driver properties from devicetree (and document them), thus the
> driver depends on OF
> - Do not select WATCHDOG_NOWAYOUT, but instead implement a software
> timer resetting the watchdog timer when the device is not open
> - Only support a single instance of the watchdog, so the private data
> can be kept in static data
> - Use devm_* functions in altera_wdt_probe to simplify cleanup and
> error handling
> - Remove empty altera_wdt_shutdown function
> - Add MODULE_LICENSE (GPL)
>
>
> .../devicetree/bindings/watchdog/altera_wdt.txt | 7 +
> drivers/watchdog/Kconfig | 8 +
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/altera_wdt.c | 309 ++++++++++++++++++++
> 4 files changed, 325 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/watchdog/altera_wdt.txt
> create mode 100644 drivers/watchdog/altera_wdt.c
>
> diff --git a/Documentation/devicetree/bindings/watchdog/altera_wdt.txt b/Documentation/devicetree/bindings/watchdog/altera_wdt.txt
> new file mode 100644
> index 0000000..16ac949
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/altera_wdt.txt
> @@ -0,0 +1,7 @@
> +Altera Watchdog Timer
> +
> +Required properties:
> +- compatible : should be "ALTR,wdt-1.0"
> +- clock-frequency : frequency of the clock input
> +- timeout : load value of the timer (number of clock ticks until watchdog
> + resets)
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index bd6a33d..ebcafb0 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -69,6 +69,14 @@ config WM8350_WATCHDOG
> Support for the watchdog in the WM8350 AudioPlus PMIC. When
> the watchdog triggers the system will be reset.
>
> +config ALTERA_WDT
> + tristate "Altera Watchdog Timer"
> + depends on OF
> + help
> + Support for the Altera Timer in the Watchdog Timer configuration. This
> + component is found on SOPC (System on Programmable Chip) for Altera
> + FPGAs.
> +
> # ALPHA Architecture
>
> # ARM Architecture
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index fd9c8c0..48a2167 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -153,4 +153,5 @@ obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
> obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
> obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
> obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
> +obj-$(CONFIG_ALTERA_WDT) += altera_wdt.o
> obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
> diff --git a/drivers/watchdog/altera_wdt.c b/drivers/watchdog/altera_wdt.c
> new file mode 100644
> index 0000000..2a7f14a
> --- /dev/null
> +++ b/drivers/watchdog/altera_wdt.c
> @@ -0,0 +1,309 @@
> +/*
> + * Driver for the Altera Watchdog Timer
> + *
> + * Copyright (C) 2011 Tobias Klauser <[email protected]>
> + * Copyright (C) 2005 Walter Goossens
> + *
> + * Originally based on wdt.c which is
> + *
> + * Copyright (C) 1995-1997 Alan Cox <[email protected]>
> + *
> + * Software timeout heartbeat code based on pika_wdt.c which is
> + *
> + * Copyright (c) 2008 PIKA Technologies
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/miscdevice.h>
> +#include <linux/watchdog.h>
> +#include <linux/platform_device.h>
> +#include <linux/fs.h>
> +#include <linux/init.h>
> +#include <linux/jiffies.h>
> +#include <linux/timer.h>
> +#include <linux/io.h>
> +#include <linux/uaccess.h>
> +#include <linux/of_platform.h>
> +
> +#define WATCHDOG_NAME "altera_wdt"
> +
> +/* Register offsets */
> +#define ALTERA_WDT_STATUS 0x00
> +#define ALTERA_WDT_CONTROL 0x04
> +#define ALTERA_WDT_PERIODL 0x08
> +#define ALTERA_WDT_PERIODH 0x0C
> +
> +#define ALTERA_WDT_RUN_BIT 0x04
> +
> +/* User land timeout */
> +#define WDT_HEARTBEAT 15
> +static int heartbeat = WDT_HEARTBEAT;
> +module_param(heartbeat, int, 0);
> +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
> + "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
> +
> +static int nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, int, 0);
> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
> + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +static struct {
> + void __iomem *base;
> + unsigned long wdt_timeout; /* timeout of the hardware timer */
> +
> + unsigned long next_heartbeat; /* the next_heartbeat for the timer */
> + unsigned long is_open;
> + char expect_close;
> + struct timer_list timer; /* software timer that pings the watchdog */
> +} altera_wdt_priv;
> +
> +/*
> + * Start the watchdog. Once it has been started, it cannot be stopped anymore.
> + */
> +static void altera_wdt_setup(void)
> +{
> + u32 control = readl(altera_wdt_priv.base + ALTERA_WDT_CONTROL);
> +
> + writel(control | ALTERA_WDT_RUN_BIT, altera_wdt_priv.base + ALTERA_WDT_CONTROL);
> +}
> +
> +/*
> + * Tickle the watchdog (reset the watchdog timer)
> + */
> +static void altera_wdt_reset(void)
> +{
> + /* It doesn't matter what value we write */
> + writel(1, altera_wdt_priv.base + ALTERA_WDT_PERIODL);
> +}
> +
> +/*
> + * Software timer tick
> + */
> +static void altera_wdt_ping(unsigned long data)
> +{
> + if (time_before(jiffies, altera_wdt_priv.next_heartbeat) ||
> + (!nowayout && !altera_wdt_priv.is_open)) {
> + altera_wdt_reset();
> + mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
> + } else
> + pr_crit(WATCHDOG_NAME ": I will reset your machine!\n");
> +}
> +
> +static void altera_wdt_keepalive(void)
> +{
> + altera_wdt_priv.next_heartbeat = jiffies + heartbeat * HZ;
> +}
> +
> +static void altera_wdt_start(void)
> +{
> + altera_wdt_keepalive();
> + mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
> +}
> +
> +static int altera_wdt_open(struct inode *inode, struct file *file)
> +{
> + /* /dev/watchdog can only be opened once */
> + if (test_and_set_bit(0, &altera_wdt_priv.is_open))
> + return -EBUSY;
> +
> + altera_wdt_start();
> +
> + return nonseekable_open(inode, file);
> +}
> +
> +static int altera_wdt_release(struct inode *inode, struct file *file)
> +{
> + /* stop internal ping */
> + if (!altera_wdt_priv.expect_close)
> + del_timer(&altera_wdt_priv.timer);
> +
> + clear_bit(0, &altera_wdt_priv.is_open);
> + altera_wdt_priv.expect_close = 0;
> +
> + return 0;
> +}
> +
> +static ssize_t altera_wdt_write(struct file *file, const char __user *data,
> + size_t len, loff_t *ppos)
> +{
> + if (!len)
> + return 0;
> +
> + /* Scan for magic character */
> + if (!nowayout) {
> + size_t i;
> +
> + altera_wdt_priv.expect_close = 0;
> +
> + for (i = 0; i < len; i++) {
> + char c;
> + if (get_user(c, data + i))
> + return -EFAULT;
> + if (c == 'V') {
> + altera_wdt_priv.expect_close = 42;
> + break;
> + }
> + }
> + }
> +
> + altera_wdt_keepalive();
> +
> + return len;
> +}
> +
> +static const struct watchdog_info altera_wdt_info = {
> + .identity = "Altera Watchdog",
> + .options = WDIOF_SETTIMEOUT |
> + WDIOF_KEEPALIVEPING |
> + WDIOF_MAGICCLOSE,
> + .firmware_version = 1,
> +};
> +
> +static long altera_wdt_ioctl(struct file *file, unsigned int cmd,
> + unsigned long arg)
> +{
> + void __user *argp = (void __user *) arg;
> + int __user *p = argp;
> + int new_value;
> +
> + switch (cmd) {
> + case WDIOC_GETSUPPORT:
> + return copy_to_user(argp, &altera_wdt_info, sizeof(altera_wdt_info));
> +
> + case WDIOC_GETSTATUS:
> + case WDIOC_GETBOOTSTATUS:
> + return put_user(0, p);
> +
> + case WDIOC_KEEPALIVE:
> + altera_wdt_keepalive();
> + return 0;
> +
> + case WDIOC_SETTIMEOUT:
> + if (get_user(new_value, p))
> + return -EFAULT;
> +
> + heartbeat = new_value;
> + altera_wdt_keepalive();
> +
> + return put_user(new_value, p); /* return current value */
> +
> + case WDIOC_GETTIMEOUT:
> + return put_user(heartbeat, p);
> +
> + default:
> + return -ENOTTY;
> + }
> +}
> +
> +static const struct file_operations altera_wdt_fops = {
> + .owner = THIS_MODULE,
> + .llseek = no_llseek,
> + .open = altera_wdt_open,
> + .release = altera_wdt_release,
> + .write = altera_wdt_write,
> + .unlocked_ioctl = altera_wdt_ioctl,
> +};
> +
> +static struct miscdevice altera_wdt_miscdev = {
> + .minor = WATCHDOG_MINOR,
> + .name = "watchdog",
> + .fops = &altera_wdt_fops,
> +};
> +
> +static int __devinit altera_wdt_probe(struct platform_device *pdev)
> +{
> + struct resource *res, *mem;
> + const __be32 *freq_prop, *timeout_prop;
> + unsigned long timeout;
> + int ret;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res)
> + return -ENOENT;
> +
> + mem = devm_request_mem_region(&pdev->dev, res->start,
> + resource_size(res), pdev->name);
> + if (!mem)
> + return -EBUSY;
> +
> + altera_wdt_priv.base = devm_ioremap_nocache(&pdev->dev, mem->start,
> + resource_size(mem));
> + if (!altera_wdt_priv.base)
> + return -ENOMEM;
> +
> + freq_prop = of_get_property(pdev->dev.of_node, "clock-frequency", NULL);
> + if (!freq_prop)
> + return -ENODEV;
> +
> + timeout_prop = of_get_property(pdev->dev.of_node, "timeout", NULL);
> + if (!timeout_prop)
> + return -ENODEV;
> +
> + /* Add 1 as the timeout property actually holds the load value */
> + timeout = be32_to_cpup(timeout_prop) + 1;
> + /* Convert timeout to msecs */
> + timeout = timeout / (be32_to_cpup(freq_prop) / MSEC_PER_SEC);
> + /* Tickle the watchdog twice per timeout period */
> + altera_wdt_priv.wdt_timeout = msecs_to_jiffies(timeout / 2);
> +
> + ret = misc_register(&altera_wdt_miscdev);
> + if (ret)
> + return ret;
> +
> + altera_wdt_setup();
> + altera_wdt_priv.next_heartbeat = jiffies + heartbeat * HZ;
> + setup_timer(&altera_wdt_priv.timer, altera_wdt_ping, 0);
> + mod_timer(&altera_wdt_priv.timer, jiffies + altera_wdt_priv.wdt_timeout);
> +
> + pr_info(WATCHDOG_NAME " enabled (heartbeat=%d sec, nowayout=%d)\n",
> + heartbeat, nowayout);
> +
> + return 0;
> +}
> +
> +static int __devexit altera_wdt_remove(struct platform_device *pdev)
> +{
> + misc_deregister(&altera_wdt_miscdev);
> + return 0;
> +}
> +
> +static struct of_device_id altera_wdt_match[] = {
> + { .compatible = "altr,wdt-1.0", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, altera_wdt_match);
> +
> +static struct platform_driver altera_wdt_driver = {
> + .probe = altera_wdt_probe,
> + .remove = __devexit_p(altera_wdt_remove),
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = WATCHDOG_NAME,
> + .of_match_table = altera_wdt_match,
> + },
> +};
> +
> +static int __init altera_wdt_init(void)
> +{
> + return platform_driver_register(&altera_wdt_driver);
> +}
> +
> +static void __exit altera_wdt_exit(void)
> +{
> + platform_driver_unregister(&altera_wdt_driver);
> +}
> +
> +module_init(altera_wdt_init);
> +module_exit(altera_wdt_exit);
> +
> +MODULE_AUTHOR("Walter Goossens, Tobias Klauser <[email protected]>");
> +MODULE_DESCRIPTION("Driver for Altera Watchdog Timer");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
> +MODULE_ALIAS("platform:" WATCHDOG_NAME);
> --
> 1.7.0.4
>