2011-02-23 08:35:22

by linux

Subject: [PATCH][SCSI] mvsas: Add support for HighPoint RR27xx series HBA

This patch is to add support for HighPoint RR27xx SAS/SATA HBA which is based on Marvell 88SE9480 chipset.

Signed-off-by: HighPoint Linux Team <[email protected]>

drivers/scsi/mvsas/mv_init.c | 7 +++++++
1 file changed, 7 insertions(+)

diff -urN linux-2.6.37.orig/drivers/scsi/mvsas/mv_init.c linux-2.6.37/drivers/scsi/mvsas/mv_init.c
--- linux-2.6.37.orig/drivers/scsi/mvsas/mv_init.c 2011-02-11 08:10:46.000000000 -0500
+++ linux-2.6.37/drivers/scsi/mvsas/mv_init.c 2011-02-11 10:47:01.000000000 -0500
@@ -663,6 +663,13 @@
{ PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1300), chip_1300 },
{ PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1320), chip_1320 },
{ PCI_VDEVICE(ADAPTEC2, 0x0450), chip_6440 },
+ { PCI_VDEVICE(TTI, 0x2710), chip_9480 },
+ { PCI_VDEVICE(TTI, 0x2720), chip_9480 },
+ { PCI_VDEVICE(TTI, 0x2721), chip_9480 },
+ { PCI_VDEVICE(TTI, 0x2722), chip_9480 },
+ { PCI_VDEVICE(TTI, 0x2740), chip_9480 },
+ { PCI_VDEVICE(TTI, 0x2744), chip_9480 },
+ { PCI_VDEVICE(TTI, 0x2760), chip_9480 },

{ } /* terminate list */
};

2011-03-08 15:59:19

by Benjamin LaHaise

Subject: Re: [PATCH][SCSI] mvsas: Add support for HighPoint RR27xx series HBA

Hi folks,

On Wed, Feb 23, 2011 at 04:28:44PM +0800, HighPoint Linux Team wrote:
> This patch is to add support for HighPoint RR27xx SAS/SATA HBA which is based on Marvell 88SE9480 chipset.

Any chance of getting this merged soon? I've been using a similar patch
with my HighPoint cards on 2.6.37 for a while now with good results.

-ben