Hi,
The samsung-laptop.c driver got merged into drivers/platform/x86/, but a
copy also stayed in drivers/staging and further fixes got applied there.
A parallel build decides randomly which version to link into
samsung-laptop.ko, so this cannot work even if it was intentional. This
series applies the missing patches to drivers/platform/x86/ and deletes
the old version.
Michal
Alberto Mardegan (1):
samsung-laptop: Samsung R410P backlight driver
Greg Kroah-Hartman (1):
samsung-laptop: add support for N230 model
Michal Marek (2):
samsung-laptop: set backlight type
staging: samsung-laptop has moved to platform/x86
drivers/platform/x86/samsung-laptop.c | 17 +-
drivers/staging/Makefile | 1 -
drivers/staging/samsung-laptop/Kconfig | 10 -
drivers/staging/samsung-laptop/Makefile | 1 -
drivers/staging/samsung-laptop/TODO | 5 -
drivers/staging/samsung-laptop/samsung-laptop.c | 843 -----------------------
6 files changed, 14 insertions(+), 863 deletions(-)
delete mode 100644 drivers/staging/samsung-laptop/Kconfig
delete mode 100644 drivers/staging/samsung-laptop/Makefile
delete mode 100644 drivers/staging/samsung-laptop/TODO
delete mode 100644 drivers/staging/samsung-laptop/samsung-laptop.c
--
1.7.4.1
From: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[mmarek: cherry-picked from staging commit 0789b003]
Signed-off-by: Michal Marek <[email protected]>
---
drivers/platform/x86/samsung-laptop.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c
index f670db3..39f30ff 100644
--- a/drivers/platform/x86/samsung-laptop.c
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -601,12 +601,12 @@ static struct dmi_system_id __initdata samsung_dmi_table[] = {
.callback = dmi_check_cb,
},
{
- .ident = "N150/N210/N220",
+ .ident = "N150/N210/N220/N230",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR,
"SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"),
- DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220/N230"),
+ DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220/N230"),
},
.callback = dmi_check_cb,
},
--
1.7.4.1
Signed-off-by: Michal Marek <[email protected]>
---
drivers/staging/Makefile | 1 -
drivers/staging/samsung-laptop/Kconfig | 10 -
drivers/staging/samsung-laptop/Makefile | 1 -
drivers/staging/samsung-laptop/TODO | 5 -
drivers/staging/samsung-laptop/samsung-laptop.c | 843 -----------------------
5 files changed, 0 insertions(+), 860 deletions(-)
delete mode 100644 drivers/staging/samsung-laptop/Kconfig
delete mode 100644 drivers/staging/samsung-laptop/Makefile
delete mode 100644 drivers/staging/samsung-laptop/TODO
delete mode 100644 drivers/staging/samsung-laptop/samsung-laptop.c
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index cfd13cd..adebf8e 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -49,7 +49,6 @@ obj-$(CONFIG_XVMALLOC) += zram/
obj-$(CONFIG_ZCACHE) += zcache/
obj-$(CONFIG_WLAGS49_H2) += wlags49_h2/
obj-$(CONFIG_WLAGS49_H25) += wlags49_h25/
-obj-$(CONFIG_SAMSUNG_LAPTOP) += samsung-laptop/
obj-$(CONFIG_FB_SM7XX) += sm7xx/
obj-$(CONFIG_VIDEO_DT3155) += dt3155v4l/
obj-$(CONFIG_CRYSTALHD) += crystalhd/
diff --git a/drivers/staging/samsung-laptop/Kconfig b/drivers/staging/samsung-laptop/Kconfig
deleted file mode 100644
index f27c608..0000000
--- a/drivers/staging/samsung-laptop/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config SAMSUNG_LAPTOP
- tristate "Samsung Laptop driver"
- default n
- depends on RFKILL && BACKLIGHT_CLASS_DEVICE && X86
- help
- This module implements a driver for the N128 Samsung Laptop
- providing control over the Wireless LED and the LCD backlight
-
- To compile this driver as a module, choose
- M here: the module will be called samsung-laptop.
diff --git a/drivers/staging/samsung-laptop/Makefile b/drivers/staging/samsung-laptop/Makefile
deleted file mode 100644
index 3c6f420..0000000
--- a/drivers/staging/samsung-laptop/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_SAMSUNG_LAPTOP) += samsung-laptop.o
diff --git a/drivers/staging/samsung-laptop/TODO b/drivers/staging/samsung-laptop/TODO
deleted file mode 100644
index f7a6d58..0000000
--- a/drivers/staging/samsung-laptop/TODO
+++ /dev/null
@@ -1,5 +0,0 @@
-TODO:
- - review from other developers
- - figure out ACPI video issues
-
-Please send patches to Greg Kroah-Hartman <[email protected]>
diff --git a/drivers/staging/samsung-laptop/samsung-laptop.c b/drivers/staging/samsung-laptop/samsung-laptop.c
deleted file mode 100644
index 2529446..0000000
--- a/drivers/staging/samsung-laptop/samsung-laptop.c
+++ /dev/null
@@ -1,843 +0,0 @@
-/*
- * Samsung Laptop driver
- *
- * Copyright (C) 2009,2011 Greg Kroah-Hartman ([email protected])
- * Copyright (C) 2009,2011 Novell Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/backlight.h>
-#include <linux/fb.h>
-#include <linux/dmi.h>
-#include <linux/platform_device.h>
-#include <linux/rfkill.h>
-
-/*
- * This driver is needed because a number of Samsung laptops do not hook
- * their control settings through ACPI. So we have to poke around in the
- * BIOS to do things like brightness values, and "special" key controls.
- */
-
-/*
- * We have 0 - 8 as valid brightness levels. The specs say that level 0 should
- * be reserved by the BIOS (which really doesn't make much sense), we tell
- * userspace that the value is 0 - 7 and then just tell the hardware 1 - 8
- */
-#define MAX_BRIGHT 0x07
-
-
-#define SABI_IFACE_MAIN 0x00
-#define SABI_IFACE_SUB 0x02
-#define SABI_IFACE_COMPLETE 0x04
-#define SABI_IFACE_DATA 0x05
-
-/* Structure to get data back to the calling function */
-struct sabi_retval {
- u8 retval[20];
-};
-
-struct sabi_header_offsets {
- u8 port;
- u8 re_mem;
- u8 iface_func;
- u8 en_mem;
- u8 data_offset;
- u8 data_segment;
-};
-
-struct sabi_commands {
- /*
- * Brightness is 0 - 8, as described above.
- * Value 0 is for the BIOS to use
- */
- u8 get_brightness;
- u8 set_brightness;
-
- /*
- * first byte:
- * 0x00 - wireless is off
- * 0x01 - wireless is on
- * second byte:
- * 0x02 - 3G is off
- * 0x03 - 3G is on
- * TODO, verify 3G is correct, that doesn't seem right...
- */
- u8 get_wireless_button;
- u8 set_wireless_button;
-
- /* 0 is off, 1 is on */
- u8 get_backlight;
- u8 set_backlight;
-
- /*
- * 0x80 or 0x00 - no action
- * 0x81 - recovery key pressed
- */
- u8 get_recovery_mode;
- u8 set_recovery_mode;
-
- /*
- * on seclinux: 0 is low, 1 is high,
- * on swsmi: 0 is normal, 1 is silent, 2 is turbo
- */
- u8 get_performance_level;
- u8 set_performance_level;
-
- /*
- * Tell the BIOS that Linux is running on this machine.
- * 81 is on, 80 is off
- */
- u8 set_linux;
-};
-
-struct sabi_performance_level {
- const char *name;
- u8 value;
-};
-
-struct sabi_config {
- const char *test_string;
- u16 main_function;
- const struct sabi_header_offsets header_offsets;
- const struct sabi_commands commands;
- const struct sabi_performance_level performance_levels[4];
- u8 min_brightness;
- u8 max_brightness;
-};
-
-static const struct sabi_config sabi_configs[] = {
- {
- .test_string = "SECLINUX",
-
- .main_function = 0x4c49,
-
- .header_offsets = {
- .port = 0x00,
- .re_mem = 0x02,
- .iface_func = 0x03,
- .en_mem = 0x04,
- .data_offset = 0x05,
- .data_segment = 0x07,
- },
-
- .commands = {
- .get_brightness = 0x00,
- .set_brightness = 0x01,
-
- .get_wireless_button = 0x02,
- .set_wireless_button = 0x03,
-
- .get_backlight = 0x04,
- .set_backlight = 0x05,
-
- .get_recovery_mode = 0x06,
- .set_recovery_mode = 0x07,
-
- .get_performance_level = 0x08,
- .set_performance_level = 0x09,
-
- .set_linux = 0x0a,
- },
-
- .performance_levels = {
- {
- .name = "silent",
- .value = 0,
- },
- {
- .name = "normal",
- .value = 1,
- },
- { },
- },
- .min_brightness = 1,
- .max_brightness = 8,
- },
- {
- .test_string = "SwSmi@",
-
- .main_function = 0x5843,
-
- .header_offsets = {
- .port = 0x00,
- .re_mem = 0x04,
- .iface_func = 0x02,
- .en_mem = 0x03,
- .data_offset = 0x05,
- .data_segment = 0x07,
- },
-
- .commands = {
- .get_brightness = 0x10,
- .set_brightness = 0x11,
-
- .get_wireless_button = 0x12,
- .set_wireless_button = 0x13,
-
- .get_backlight = 0x2d,
- .set_backlight = 0x2e,
-
- .get_recovery_mode = 0xff,
- .set_recovery_mode = 0xff,
-
- .get_performance_level = 0x31,
- .set_performance_level = 0x32,
-
- .set_linux = 0xff,
- },
-
- .performance_levels = {
- {
- .name = "normal",
- .value = 0,
- },
- {
- .name = "silent",
- .value = 1,
- },
- {
- .name = "overclock",
- .value = 2,
- },
- { },
- },
- .min_brightness = 0,
- .max_brightness = 8,
- },
- { },
-};
-
-static const struct sabi_config *sabi_config;
-
-static void __iomem *sabi;
-static void __iomem *sabi_iface;
-static void __iomem *f0000_segment;
-static struct backlight_device *backlight_device;
-static struct mutex sabi_mutex;
-static struct platform_device *sdev;
-static struct rfkill *rfk;
-
-static int force;
-module_param(force, bool, 0);
-MODULE_PARM_DESC(force,
- "Disable the DMI check and forces the driver to be loaded");
-
-static int debug;
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-static int sabi_get_command(u8 command, struct sabi_retval *sretval)
-{
- int retval = 0;
- u16 port = readw(sabi + sabi_config->header_offsets.port);
- u8 complete, iface_data;
-
- mutex_lock(&sabi_mutex);
-
- /* enable memory to be able to write to it */
- outb(readb(sabi + sabi_config->header_offsets.en_mem), port);
-
- /* write out the command */
- writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN);
- writew(command, sabi_iface + SABI_IFACE_SUB);
- writeb(0, sabi_iface + SABI_IFACE_COMPLETE);
- outb(readb(sabi + sabi_config->header_offsets.iface_func), port);
-
- /* write protect memory to make it safe */
- outb(readb(sabi + sabi_config->header_offsets.re_mem), port);
-
- /* see if the command actually succeeded */
- complete = readb(sabi_iface + SABI_IFACE_COMPLETE);
- iface_data = readb(sabi_iface + SABI_IFACE_DATA);
- if (complete != 0xaa || iface_data == 0xff) {
- pr_warn("SABI get command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n",
- command, complete, iface_data);
- retval = -EINVAL;
- goto exit;
- }
- /*
- * Save off the data into a structure so the caller use it.
- * Right now we only want the first 4 bytes,
- * There are commands that need more, but not for the ones we
- * currently care about.
- */
- sretval->retval[0] = readb(sabi_iface + SABI_IFACE_DATA);
- sretval->retval[1] = readb(sabi_iface + SABI_IFACE_DATA + 1);
- sretval->retval[2] = readb(sabi_iface + SABI_IFACE_DATA + 2);
- sretval->retval[3] = readb(sabi_iface + SABI_IFACE_DATA + 3);
-
-exit:
- mutex_unlock(&sabi_mutex);
- return retval;
-
-}
-
-static int sabi_set_command(u8 command, u8 data)
-{
- int retval = 0;
- u16 port = readw(sabi + sabi_config->header_offsets.port);
- u8 complete, iface_data;
-
- mutex_lock(&sabi_mutex);
-
- /* enable memory to be able to write to it */
- outb(readb(sabi + sabi_config->header_offsets.en_mem), port);
-
- /* write out the command */
- writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN);
- writew(command, sabi_iface + SABI_IFACE_SUB);
- writeb(0, sabi_iface + SABI_IFACE_COMPLETE);
- writeb(data, sabi_iface + SABI_IFACE_DATA);
- outb(readb(sabi + sabi_config->header_offsets.iface_func), port);
-
- /* write protect memory to make it safe */
- outb(readb(sabi + sabi_config->header_offsets.re_mem), port);
-
- /* see if the command actually succeeded */
- complete = readb(sabi_iface + SABI_IFACE_COMPLETE);
- iface_data = readb(sabi_iface + SABI_IFACE_DATA);
- if (complete != 0xaa || iface_data == 0xff) {
- pr_warn("SABI set command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n",
- command, complete, iface_data);
- retval = -EINVAL;
- }
-
- mutex_unlock(&sabi_mutex);
- return retval;
-}
-
-static void test_backlight(void)
-{
- struct sabi_retval sretval;
-
- sabi_get_command(sabi_config->commands.get_backlight, &sretval);
- printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
-
- sabi_set_command(sabi_config->commands.set_backlight, 0);
- printk(KERN_DEBUG "backlight should be off\n");
-
- sabi_get_command(sabi_config->commands.get_backlight, &sretval);
- printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
-
- msleep(1000);
-
- sabi_set_command(sabi_config->commands.set_backlight, 1);
- printk(KERN_DEBUG "backlight should be on\n");
-
- sabi_get_command(sabi_config->commands.get_backlight, &sretval);
- printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
-}
-
-static void test_wireless(void)
-{
- struct sabi_retval sretval;
-
- sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
- printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
-
- sabi_set_command(sabi_config->commands.set_wireless_button, 0);
- printk(KERN_DEBUG "wireless led should be off\n");
-
- sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
- printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
-
- msleep(1000);
-
- sabi_set_command(sabi_config->commands.set_wireless_button, 1);
- printk(KERN_DEBUG "wireless led should be on\n");
-
- sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
- printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
-}
-
-static u8 read_brightness(void)
-{
- struct sabi_retval sretval;
- int user_brightness = 0;
- int retval;
-
- retval = sabi_get_command(sabi_config->commands.get_brightness,
- &sretval);
- if (!retval) {
- user_brightness = sretval.retval[0];
- if (user_brightness != 0)
- user_brightness -= sabi_config->min_brightness;
- }
- return user_brightness;
-}
-
-static void set_brightness(u8 user_brightness)
-{
- u8 user_level = user_brightness - sabi_config->min_brightness;
-
- sabi_set_command(sabi_config->commands.set_brightness, user_level);
-}
-
-static int get_brightness(struct backlight_device *bd)
-{
- return (int)read_brightness();
-}
-
-static int update_status(struct backlight_device *bd)
-{
- set_brightness(bd->props.brightness);
-
- if (bd->props.power == FB_BLANK_UNBLANK)
- sabi_set_command(sabi_config->commands.set_backlight, 1);
- else
- sabi_set_command(sabi_config->commands.set_backlight, 0);
- return 0;
-}
-
-static const struct backlight_ops backlight_ops = {
- .get_brightness = get_brightness,
- .update_status = update_status,
-};
-
-static int rfkill_set(void *data, bool blocked)
-{
- /* Do something with blocked...*/
- /*
- * blocked == false is on
- * blocked == true is off
- */
- if (blocked)
- sabi_set_command(sabi_config->commands.set_wireless_button, 0);
- else
- sabi_set_command(sabi_config->commands.set_wireless_button, 1);
-
- return 0;
-}
-
-static struct rfkill_ops rfkill_ops = {
- .set_block = rfkill_set,
-};
-
-static int init_wireless(struct platform_device *sdev)
-{
- int retval;
-
- rfk = rfkill_alloc("samsung-wifi", &sdev->dev, RFKILL_TYPE_WLAN,
- &rfkill_ops, NULL);
- if (!rfk)
- return -ENOMEM;
-
- retval = rfkill_register(rfk);
- if (retval) {
- rfkill_destroy(rfk);
- return -ENODEV;
- }
-
- return 0;
-}
-
-static void destroy_wireless(void)
-{
- rfkill_unregister(rfk);
- rfkill_destroy(rfk);
-}
-
-static ssize_t get_performance_level(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct sabi_retval sretval;
- int retval;
- int i;
-
- /* Read the state */
- retval = sabi_get_command(sabi_config->commands.get_performance_level,
- &sretval);
- if (retval)
- return retval;
-
- /* The logic is backwards, yeah, lots of fun... */
- for (i = 0; sabi_config->performance_levels[i].name; ++i) {
- if (sretval.retval[0] == sabi_config->performance_levels[i].value)
- return sprintf(buf, "%s\n", sabi_config->performance_levels[i].name);
- }
- return sprintf(buf, "%s\n", "unknown");
-}
-
-static ssize_t set_performance_level(struct device *dev,
- struct device_attribute *attr, const char *buf,
- size_t count)
-{
- if (count >= 1) {
- int i;
- for (i = 0; sabi_config->performance_levels[i].name; ++i) {
- const struct sabi_performance_level *level =
- &sabi_config->performance_levels[i];
- if (!strncasecmp(level->name, buf, strlen(level->name))) {
- sabi_set_command(sabi_config->commands.set_performance_level,
- level->value);
- break;
- }
- }
- if (!sabi_config->performance_levels[i].name)
- return -EINVAL;
- }
- return count;
-}
-static DEVICE_ATTR(performance_level, S_IWUSR | S_IRUGO,
- get_performance_level, set_performance_level);
-
-
-static int __init dmi_check_cb(const struct dmi_system_id *id)
-{
- pr_info("found laptop model '%s'\n",
- id->ident);
- return 0;
-}
-
-static struct dmi_system_id __initdata samsung_dmi_table[] = {
- {
- .ident = "N128",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N128"),
- DMI_MATCH(DMI_BOARD_NAME, "N128"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N130",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N130"),
- DMI_MATCH(DMI_BOARD_NAME, "N130"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "X125",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X125"),
- DMI_MATCH(DMI_BOARD_NAME, "X125"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "X120/X170",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X120/X170"),
- DMI_MATCH(DMI_BOARD_NAME, "X120/X170"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "NC10",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
- DMI_MATCH(DMI_BOARD_NAME, "NC10"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "NP-Q45",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
- DMI_MATCH(DMI_BOARD_NAME, "SQ45S70S"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "X360",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X360"),
- DMI_MATCH(DMI_BOARD_NAME, "X360"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R410 Plus",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R410P"),
- DMI_MATCH(DMI_BOARD_NAME, "R460"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R518",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R518"),
- DMI_MATCH(DMI_BOARD_NAME, "R518"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R519/R719",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R519/R719"),
- DMI_MATCH(DMI_BOARD_NAME, "R519/R719"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N150/N210/N220/N230",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220/N230"),
- DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220/N230"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N150P/N210P/N220P",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N150P/N210P/N220P"),
- DMI_MATCH(DMI_BOARD_NAME, "N150P/N210P/N220P"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R530/R730",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R530/R730"),
- DMI_MATCH(DMI_BOARD_NAME, "R530/R730"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "NF110/NF210/NF310",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"),
- DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N145P/N250P/N260P",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"),
- DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R70/R71",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R70/R71"),
- DMI_MATCH(DMI_BOARD_NAME, "R70/R71"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "P460",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "P460"),
- DMI_MATCH(DMI_BOARD_NAME, "P460"),
- },
- .callback = dmi_check_cb,
- },
- { },
-};
-MODULE_DEVICE_TABLE(dmi, samsung_dmi_table);
-
-static int find_signature(void __iomem *memcheck, const char *testStr)
-{
- int i = 0;
- int loca;
-
- for (loca = 0; loca < 0xffff; loca++) {
- char temp = readb(memcheck + loca);
-
- if (temp == testStr[i]) {
- if (i == strlen(testStr)-1)
- break;
- ++i;
- } else {
- i = 0;
- }
- }
- return loca;
-}
-
-static int __init samsung_init(void)
-{
- struct backlight_properties props;
- struct sabi_retval sretval;
- unsigned int ifaceP;
- int i;
- int loca;
- int retval;
-
- mutex_init(&sabi_mutex);
-
- if (!force && !dmi_check_system(samsung_dmi_table))
- return -ENODEV;
-
- f0000_segment = ioremap_nocache(0xf0000, 0xffff);
- if (!f0000_segment) {
- pr_err("Can't map the segment at 0xf0000\n");
- return -EINVAL;
- }
-
- /* Try to find one of the signatures in memory to find the header */
- for (i = 0; sabi_configs[i].test_string != 0; ++i) {
- sabi_config = &sabi_configs[i];
- loca = find_signature(f0000_segment, sabi_config->test_string);
- if (loca != 0xffff)
- break;
- }
-
- if (loca == 0xffff) {
- pr_err("This computer does not support SABI\n");
- goto error_no_signature;
- }
-
- /* point to the SMI port Number */
- loca += 1;
- sabi = (f0000_segment + loca);
-
- if (debug) {
- printk(KERN_DEBUG "This computer supports SABI==%x\n",
- loca + 0xf0000 - 6);
- printk(KERN_DEBUG "SABI header:\n");
- printk(KERN_DEBUG " SMI Port Number = 0x%04x\n",
- readw(sabi + sabi_config->header_offsets.port));
- printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n",
- readb(sabi + sabi_config->header_offsets.iface_func));
- printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n",
- readb(sabi + sabi_config->header_offsets.en_mem));
- printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n",
- readb(sabi + sabi_config->header_offsets.re_mem));
- printk(KERN_DEBUG " SABI data offset = 0x%04x\n",
- readw(sabi + sabi_config->header_offsets.data_offset));
- printk(KERN_DEBUG " SABI data segment = 0x%04x\n",
- readw(sabi + sabi_config->header_offsets.data_segment));
- }
-
- /* Get a pointer to the SABI Interface */
- ifaceP = (readw(sabi + sabi_config->header_offsets.data_segment) & 0x0ffff) << 4;
- ifaceP += readw(sabi + sabi_config->header_offsets.data_offset) & 0x0ffff;
- sabi_iface = ioremap_nocache(ifaceP, 16);
- if (!sabi_iface) {
- pr_err("Can't remap %x\n", ifaceP);
- goto exit;
- }
- if (debug) {
- printk(KERN_DEBUG "ifaceP = 0x%08x\n", ifaceP);
- printk(KERN_DEBUG "sabi_iface = %p\n", sabi_iface);
-
- test_backlight();
- test_wireless();
-
- retval = sabi_get_command(sabi_config->commands.get_brightness,
- &sretval);
- printk(KERN_DEBUG "brightness = 0x%02x\n", sretval.retval[0]);
- }
-
- /* Turn on "Linux" mode in the BIOS */
- if (sabi_config->commands.set_linux != 0xff) {
- retval = sabi_set_command(sabi_config->commands.set_linux,
- 0x81);
- if (retval) {
- pr_warn("Linux mode was not set!\n");
- goto error_no_platform;
- }
- }
-
- /* knock up a platform device to hang stuff off of */
- sdev = platform_device_register_simple("samsung", -1, NULL, 0);
- if (IS_ERR(sdev))
- goto error_no_platform;
-
- /* create a backlight device to talk to this one */
- memset(&props, 0, sizeof(struct backlight_properties));
- props.type = BACKLIGHT_PLATFORM;
- props.max_brightness = sabi_config->max_brightness;
- backlight_device = backlight_device_register("samsung", &sdev->dev,
- NULL, &backlight_ops,
- &props);
- if (IS_ERR(backlight_device))
- goto error_no_backlight;
-
- backlight_device->props.brightness = read_brightness();
- backlight_device->props.power = FB_BLANK_UNBLANK;
- backlight_update_status(backlight_device);
-
- retval = init_wireless(sdev);
- if (retval)
- goto error_no_rfk;
-
- retval = device_create_file(&sdev->dev, &dev_attr_performance_level);
- if (retval)
- goto error_file_create;
-
-exit:
- return 0;
-
-error_file_create:
- destroy_wireless();
-
-error_no_rfk:
- backlight_device_unregister(backlight_device);
-
-error_no_backlight:
- platform_device_unregister(sdev);
-
-error_no_platform:
- iounmap(sabi_iface);
-
-error_no_signature:
- iounmap(f0000_segment);
- return -EINVAL;
-}
-
-static void __exit samsung_exit(void)
-{
- /* Turn off "Linux" mode in the BIOS */
- if (sabi_config->commands.set_linux != 0xff)
- sabi_set_command(sabi_config->commands.set_linux, 0x80);
-
- device_remove_file(&sdev->dev, &dev_attr_performance_level);
- backlight_device_unregister(backlight_device);
- destroy_wireless();
- iounmap(sabi_iface);
- iounmap(f0000_segment);
- platform_device_unregister(sdev);
-}
-
-module_init(samsung_init);
-module_exit(samsung_exit);
-
-MODULE_AUTHOR("Greg Kroah-Hartman <[email protected]>");
-MODULE_DESCRIPTION("Samsung Backlight driver");
-MODULE_LICENSE("GPL");
--
1.7.4.1
From: Alberto Mardegan <[email protected]>
Here's a trivial patch which adds support to the backlight device found
in Samsung R410 Plus laptops.
Signed-off-by: Alberto Mardegan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[mmarek: cherry-picked from staging commit d542f180]
Signed-off-by: Michal Marek <[email protected]>
---
drivers/platform/x86/samsung-laptop.c | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c
index de434c6..f670db3 100644
--- a/drivers/platform/x86/samsung-laptop.c
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -571,6 +571,16 @@ static struct dmi_system_id __initdata samsung_dmi_table[] = {
.callback = dmi_check_cb,
},
{
+ .ident = "R410 Plus",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "R410P"),
+ DMI_MATCH(DMI_BOARD_NAME, "R460"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
.ident = "R518",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR,
--
1.7.4.1
Cherry-picked from drivers/staging/samsung-laptop/samsung-laptop.c
Signed-off-by: Michal Marek <[email protected]>
---
drivers/platform/x86/samsung-laptop.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c
index 39f30ff..d347116 100644
--- a/drivers/platform/x86/samsung-laptop.c
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -781,6 +781,7 @@ static int __init samsung_init(void)
/* create a backlight device to talk to this one */
memset(&props, 0, sizeof(struct backlight_properties));
+ props.type = BACKLIGHT_PLATFORM;
props.max_brightness = sabi_config->max_brightness;
backlight_device = backlight_device_register("samsung", &sdev->dev,
NULL, &backlight_ops,
--
1.7.4.1
On Fri, Apr 08, 2011 at 05:02:02PM +0200, Michal Marek wrote:
> Hi,
>
> The samsung-laptop.c driver got merged into drivers/platform/x86/, but a
> copy also stayed in drivers/staging and further fixes got applied there.
> A parallel build decides randomly which version to link into
> samsung-laptop.ko, so this cannot work even if it was intentional. This
> series applies the missing patches to drivers/platform/x86/ and deletes
> the old version.
Heh, yes, sorry about this, it was a miscommunication between me and
Matthew.
Matthew, do you want to take these patches in your tree, or do you want
me to send them to Linus? Whatever is easier for you is fine with me.
thanks,
greg k-h
I've applied this set, thanks!
--
Matthew Garrett | [email protected]