Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/max8998.c | 22 +++++++++++++---------
1 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index f57e9c4..41a1495 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -732,13 +732,15 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
if (!pdata->buck1_set1) {
printk(KERN_ERR "MAX8998 SET1 GPIO defined as 0 !\n");
WARN_ON(!pdata->buck1_set1);
- return -EIO;
+ ret = -EIO;
+ goto err_free_mem;
}
/* Check if SET2 is not equal to 0 */
if (!pdata->buck1_set2) {
printk(KERN_ERR "MAX8998 SET2 GPIO defined as 0 !\n");
WARN_ON(!pdata->buck1_set2);
- return -EIO;
+ ret = -EIO;
+ goto err_free_mem;
}
gpio_request(pdata->buck1_set1, "MAX8998 BUCK1_SET1");
@@ -758,7 +760,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
max8998->buck1_vol[0] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i);
if (ret)
- return ret;
+ goto err_free_mem;
/* Set predefined value for BUCK1 register 2 */
i = 0;
@@ -770,7 +772,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
max8998->buck1_vol[1] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i);
if (ret)
- return ret;
+ goto err_free_mem;
/* Set predefined value for BUCK1 register 3 */
i = 0;
@@ -782,7 +784,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
max8998->buck1_vol[2] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE3, i);
if (ret)
- return ret;
+ goto err_free_mem;
/* Set predefined value for BUCK1 register 4 */
i = 0;
@@ -794,7 +796,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
max8998->buck1_vol[3] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE4, i);
if (ret)
- return ret;
+ goto err_free_mem;
}
@@ -803,7 +805,8 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
if (!pdata->buck2_set3) {
printk(KERN_ERR "MAX8998 SET3 GPIO defined as 0 !\n");
WARN_ON(!pdata->buck2_set3);
- return -EIO;
+ ret = -EIO;
+ goto err_free_mem;
}
gpio_request(pdata->buck2_set3, "MAX8998 BUCK2_SET3");
gpio_direction_output(pdata->buck2_set3,
@@ -818,7 +821,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
max8998->buck2_vol[0] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i);
if (ret)
- return ret;
+ goto err_free_mem;
/* BUCK2 register 2 */
i = 0;
@@ -830,7 +833,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
max8998->buck2_vol[1] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i);
if (ret)
- return ret;
+ goto err_free_mem;
}
for (i = 0; i < pdata->num_regulators; i++) {
@@ -860,6 +863,7 @@ err:
if (rdev[i])
regulator_unregister(rdev[i]);
+err_free_mem:
kfree(max8998->rdev);
kfree(max8998);
--
1.7.1
On Fri, May 13, 2011 at 02:54:06PM +0800, Axel Lin wrote:
> Signed-off-by: Axel Lin <[email protected]>
Acked-by: Mark Brown <[email protected]>
Acked-by: Kyungmin Park <[email protected]>
On Fri, May 13, 2011 at 4:05 PM, Mark Brown
<[email protected]> wrote:
> On Fri, May 13, 2011 at 02:54:06PM +0800, Axel Lin wrote:
>> Signed-off-by: Axel Lin <[email protected]>
>
> Acked-by: Mark Brown <[email protected]>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at ?http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at ?http://www.tux.org/lkml/
>
On Fri, 2011-05-13 at 14:54 +0800, Axel Lin wrote:
> Signed-off-by: Axel Lin <[email protected]>
> ---
> drivers/regulator/max8998.c | 22 +++++++++++++---------
> 1 files changed, 13 insertions(+), 9 deletions(-)
>
Applied.
Liam