Joe Perches (8):
generic_hdlc: Update to current logging forms
cosa: Update to current logging forms
cyclom: Update to current logging forms
frame relay dlci/frad: Update to current logging forms
dscc4: Update to current logging forms
farsync: Update to current logging forms
ixp4xx_hss: Update to current logging forms
wan: Update to current logging forms
drivers/net/wan/c101.c | 30 +++---
drivers/net/wan/cosa.c | 226 +++++++++++++++++++---------------------
drivers/net/wan/cycx_drv.c | 81 +++++++--------
drivers/net/wan/cycx_main.c | 31 +++---
drivers/net/wan/cycx_x25.c | 177 +++++++++++++++-----------------
drivers/net/wan/dlci.c | 22 +++--
drivers/net/wan/dscc4.c | 80 +++++++--------
drivers/net/wan/farsync.c | 7 +-
drivers/net/wan/hd64570.c | 8 +-
drivers/net/wan/hd64572.c | 8 +-
drivers/net/wan/hdlc.c | 16 ++--
drivers/net/wan/hdlc_cisco.c | 21 ++---
drivers/net/wan/hdlc_fr.c | 96 ++++++++----------
drivers/net/wan/hdlc_ppp.c | 9 +-
drivers/net/wan/hdlc_x25.c | 12 +--
drivers/net/wan/hostess_sv11.c | 11 +-
drivers/net/wan/ixp4xx_hss.c | 28 +++---
drivers/net/wan/lapbether.c | 18 ++--
drivers/net/wan/n2.c | 42 ++++----
drivers/net/wan/pc300_drv.c | 4 +-
drivers/net/wan/pc300too.c | 36 +++----
drivers/net/wan/pci200syn.c | 29 +++---
drivers/net/wan/sbni.c | 67 ++++++------
drivers/net/wan/sdla.c | 52 ++++++----
drivers/net/wan/sealevel.c | 11 +-
drivers/net/wan/wanxl.c | 90 ++++++++---------
drivers/net/wan/x25_asy.c | 47 ++++----
drivers/net/wan/z85230.c | 34 +++---
28 files changed, 620 insertions(+), 673 deletions(-)
--
1.7.6.rc1
Use pr_fmt, pr_<level> and netdev_<level> as appropriate.
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/wan/c101.c | 30 +++++++-------
drivers/net/wan/hd64570.c | 8 ++--
drivers/net/wan/hd64572.c | 8 ++--
drivers/net/wan/hdlc.c | 16 ++++---
drivers/net/wan/hdlc_cisco.c | 21 ++++------
drivers/net/wan/hdlc_fr.c | 96 +++++++++++++++++++-----------------------
drivers/net/wan/hdlc_ppp.c | 9 ++--
drivers/net/wan/hdlc_x25.c | 12 ++---
drivers/net/wan/n2.c | 42 +++++++++---------
drivers/net/wan/pc300too.c | 36 +++++++--------
drivers/net/wan/pci200syn.c | 29 ++++++-------
drivers/net/wan/wanxl.c | 90 ++++++++++++++++++---------------------
12 files changed, 186 insertions(+), 211 deletions(-)
diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c
index 4ac85a0..54f995f 100644
--- a/drivers/net/wan/c101.c
+++ b/drivers/net/wan/c101.c
@@ -14,6 +14,8 @@
* Moxa C101 User's Manual
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/capability.h>
@@ -313,44 +315,44 @@ static int __init c101_run(unsigned long irq, unsigned long winbase)
int result;
if (irq<3 || irq>15 || irq == 6) /* FIXME */ {
- printk(KERN_ERR "c101: invalid IRQ value\n");
+ pr_err("invalid IRQ value\n");
return -ENODEV;
}
if (winbase < 0xC0000 || winbase > 0xDFFFF || (winbase & 0x3FFF) !=0) {
- printk(KERN_ERR "c101: invalid RAM value\n");
+ pr_err("invalid RAM value\n");
return -ENODEV;
}
card = kzalloc(sizeof(card_t), GFP_KERNEL);
if (card == NULL) {
- printk(KERN_ERR "c101: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
return -ENOBUFS;
}
card->dev = alloc_hdlcdev(card);
if (!card->dev) {
- printk(KERN_ERR "c101: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
kfree(card);
return -ENOBUFS;
}
if (request_irq(irq, sca_intr, 0, devname, card)) {
- printk(KERN_ERR "c101: could not allocate IRQ\n");
+ pr_err("could not allocate IRQ\n");
c101_destroy_card(card);
return -EBUSY;
}
card->irq = irq;
if (!request_mem_region(winbase, C101_MAPPED_RAM_SIZE, devname)) {
- printk(KERN_ERR "c101: could not request RAM window\n");
+ pr_err("could not request RAM window\n");
c101_destroy_card(card);
return -EBUSY;
}
card->phy_winbase = winbase;
card->win0base = ioremap(winbase, C101_MAPPED_RAM_SIZE);
if (!card->win0base) {
- printk(KERN_ERR "c101: could not map I/O address\n");
+ pr_err("could not map I/O address\n");
c101_destroy_card(card);
return -EFAULT;
}
@@ -381,7 +383,7 @@ static int __init c101_run(unsigned long irq, unsigned long winbase)
result = register_hdlc_device(dev);
if (result) {
- printk(KERN_WARNING "c101: unable to register hdlc device\n");
+ pr_warn("unable to register hdlc device\n");
c101_destroy_card(card);
return result;
}
@@ -389,10 +391,8 @@ static int __init c101_run(unsigned long irq, unsigned long winbase)
sca_init_port(card); /* Set up C101 memory */
set_carrier(card);
- printk(KERN_INFO "%s: Moxa C101 on IRQ%u,"
- " using %u TX + %u RX packets rings\n",
- dev->name, card->irq,
- card->tx_ring_buffers, card->rx_ring_buffers);
+ netdev_info(dev, "Moxa C101 on IRQ%u, using %u TX + %u RX packets rings\n",
+ card->irq, card->tx_ring_buffers, card->rx_ring_buffers);
*new_card = card;
new_card = &card->next_card;
@@ -405,12 +405,12 @@ static int __init c101_init(void)
{
if (hw == NULL) {
#ifdef MODULE
- printk(KERN_INFO "c101: no card initialized\n");
+ pr_info("no card initialized\n");
#endif
return -EINVAL; /* no parameters specified, abort */
}
- printk(KERN_INFO "%s\n", version);
+ pr_info("%s\n", version);
do {
unsigned long irq, ram;
@@ -428,7 +428,7 @@ static int __init c101_init(void)
return first_card ? 0 : -EINVAL;
}while(*hw++ == ':');
- printk(KERN_ERR "c101: invalid hardware parameters\n");
+ pr_err("invalid hardware parameters\n");
return first_card ? 0 : -EINVAL;
}
diff --git a/drivers/net/wan/hd64570.c b/drivers/net/wan/hd64570.c
index a3ea27c..33b67d8 100644
--- a/drivers/net/wan/hd64570.c
+++ b/drivers/net/wan/hd64570.c
@@ -582,8 +582,8 @@ static void sca_dump_rings(struct net_device *dev)
sca_in(DSR_RX(phy_node(port)), card), port->rxin,
sca_in(DSR_RX(phy_node(port)), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port_to_card(port)->rx_ring_buffers; cnt++)
- printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
- printk(KERN_CONT "\n");
+ pr_cont(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
+ pr_cont("\n");
printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
"last=%u %sactive",
@@ -593,8 +593,8 @@ static void sca_dump_rings(struct net_device *dev)
sca_in(DSR_TX(phy_node(port)), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port_to_card(port)->tx_ring_buffers; cnt++)
- printk(" %02X", readb(&(desc_address(port, cnt, 1)->stat)));
- printk("\n");
+ pr_cont(" %02X", readb(&(desc_address(port, cnt, 1)->stat)));
+ pr_cont("\n");
printk(KERN_DEBUG "MSCI: MD: %02x %02x %02x, ST: %02x %02x %02x %02x,"
" FST: %02x CST: %02x %02x\n",
diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c
index e305274..efc0db1 100644
--- a/drivers/net/wan/hd64572.c
+++ b/drivers/net/wan/hd64572.c
@@ -530,8 +530,8 @@ static void sca_dump_rings(struct net_device *dev)
sca_in(DSR_RX(port->chan), card), port->rxin,
sca_in(DSR_RX(port->chan), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port->card->rx_ring_buffers; cnt++)
- printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
- printk(KERN_CONT "\n");
+ pr_cont(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
+ pr_cont("\n");
printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
"last=%u %sactive",
@@ -541,8 +541,8 @@ static void sca_dump_rings(struct net_device *dev)
sca_in(DSR_TX(port->chan), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port->card->tx_ring_buffers; cnt++)
- printk(" %02X", readb(&(desc_address(port, cnt, 1)->stat)));
- printk("\n");
+ pr_cont(" %02X", readb(&(desc_address(port, cnt, 1)->stat)));
+ pr_cont("\n");
printk(KERN_DEBUG "MSCI: MD: %02x %02x %02x,"
" ST: %02x %02x %02x %02x %02x, FST: %02x CST: %02x %02x\n",
diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c
index 5d4bb61..10cc7df 100644
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -22,6 +22,8 @@
* - proto->start() and stop() are called with spin_lock_irq held.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/errno.h>
#include <linux/hdlc.h>
#include <linux/if_arp.h>
@@ -130,10 +132,10 @@ static int hdlc_device_event(struct notifier_block *this, unsigned long event,
goto carrier_exit;
if (hdlc->carrier) {
- printk(KERN_INFO "%s: Carrier detected\n", dev->name);
+ netdev_info(dev, "Carrier detected\n");
hdlc_proto_start(dev);
} else {
- printk(KERN_INFO "%s: Carrier lost\n", dev->name);
+ netdev_info(dev, "Carrier lost\n");
hdlc_proto_stop(dev);
}
@@ -165,10 +167,10 @@ int hdlc_open(struct net_device *dev)
spin_lock_irq(&hdlc->state_lock);
if (hdlc->carrier) {
- printk(KERN_INFO "%s: Carrier detected\n", dev->name);
+ netdev_info(dev, "Carrier detected\n");
hdlc_proto_start(dev);
} else
- printk(KERN_INFO "%s: No carrier\n", dev->name);
+ netdev_info(dev, "No carrier\n");
hdlc->open = 1;
@@ -281,8 +283,8 @@ int attach_hdlc_protocol(struct net_device *dev, struct hdlc_proto *proto,
if (size)
if ((dev_to_hdlc(dev)->state = kmalloc(size,
GFP_KERNEL)) == NULL) {
- printk(KERN_WARNING "Memory squeeze on"
- " hdlc_proto_attach()\n");
+ netdev_warn(dev,
+ "Memory squeeze on hdlc_proto_attach()\n");
module_put(proto->module);
return -ENOBUFS;
}
@@ -363,7 +365,7 @@ static int __init hdlc_module_init(void)
{
int result;
- printk(KERN_INFO "%s\n", version);
+ pr_info("%s\n", version);
if ((result = register_netdevice_notifier(&hdlc_notifier)) != 0)
return result;
dev_add_pack(&hdlc_packet_type);
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index b1e5e5b..3f20808 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -103,9 +103,7 @@ static void cisco_keepalive_send(struct net_device *dev, u32 type,
skb = dev_alloc_skb(sizeof(struct hdlc_header) +
sizeof(struct cisco_packet));
if (!skb) {
- printk(KERN_WARNING
- "%s: Memory squeeze on cisco_keepalive_send()\n",
- dev->name);
+ netdev_warn(dev, "Memory squeeze on cisco_keepalive_send()\n");
return;
}
skb_reserve(skb, 4);
@@ -181,8 +179,8 @@ static int cisco_rx(struct sk_buff *skb)
CISCO_PACKET_LEN) &&
(skb->len != sizeof(struct hdlc_header) +
CISCO_BIG_PACKET_LEN)) {
- printk(KERN_INFO "%s: Invalid length of Cisco control"
- " packet (%d bytes)\n", dev->name, skb->len);
+ netdev_info(dev, "Invalid length of Cisco control packet (%d bytes)\n",
+ skb->len);
goto rx_error;
}
@@ -217,8 +215,7 @@ static int cisco_rx(struct sk_buff *skb)
return NET_RX_SUCCESS;
case CISCO_ADDR_REPLY:
- printk(KERN_INFO "%s: Unexpected Cisco IP address "
- "reply\n", dev->name);
+ netdev_info(dev, "Unexpected Cisco IP address reply\n");
goto rx_error;
case CISCO_KEEPALIVE_REQ:
@@ -235,9 +232,8 @@ static int cisco_rx(struct sk_buff *skb)
min = sec / 60; sec -= min * 60;
hrs = min / 60; min -= hrs * 60;
days = hrs / 24; hrs -= days * 24;
- printk(KERN_INFO "%s: Link up (peer "
- "uptime %ud%uh%um%us)\n",
- dev->name, days, hrs, min, sec);
+ netdev_info(dev, "Link up (peer uptime %ud%uh%um%us)\n",
+ days, hrs, min, sec);
netif_dormant_off(dev);
st->up = 1;
}
@@ -249,8 +245,7 @@ static int cisco_rx(struct sk_buff *skb)
} /* switch (keepalive type) */
} /* switch (protocol) */
- printk(KERN_INFO "%s: Unsupported protocol %x\n", dev->name,
- ntohs(data->protocol));
+ netdev_info(dev, "Unsupported protocol %x\n", ntohs(data->protocol));
dev_kfree_skb_any(skb);
return NET_RX_DROP;
@@ -272,7 +267,7 @@ static void cisco_timer(unsigned long arg)
if (st->up &&
time_after(jiffies, st->last_poll + st->settings.timeout * HZ)) {
st->up = 0;
- printk(KERN_INFO "%s: Link down\n", dev->name);
+ netdev_info(dev, "Link down\n");
netif_dormant_on(dev);
}
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index fc433f2..b25c922 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -446,15 +446,14 @@ static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev)
static inline void fr_log_dlci_active(pvc_device *pvc)
{
- printk(KERN_INFO "%s: DLCI %d [%s%s%s]%s %s\n",
- pvc->frad->name,
- pvc->dlci,
- pvc->main ? pvc->main->name : "",
- pvc->main && pvc->ether ? " " : "",
- pvc->ether ? pvc->ether->name : "",
- pvc->state.new ? " new" : "",
- !pvc->state.exist ? "deleted" :
- pvc->state.active ? "active" : "inactive");
+ netdev_info(pvc->frad, "DLCI %d [%s%s%s]%s %s\n",
+ pvc->dlci,
+ pvc->main ? pvc->main->name : "",
+ pvc->main && pvc->ether ? " " : "",
+ pvc->ether ? pvc->ether->name : "",
+ pvc->state.new ? " new" : "",
+ !pvc->state.exist ? "deleted" :
+ pvc->state.active ? "active" : "inactive");
}
@@ -481,16 +480,14 @@ static void fr_lmi_send(struct net_device *dev, int fullrep)
if (dce && fullrep) {
len += state(hdlc)->dce_pvc_count * (2 + stat_len);
if (len > HDLC_MAX_MRU) {
- printk(KERN_WARNING "%s: Too many PVCs while sending "
- "LMI full report\n", dev->name);
+ netdev_warn(dev, "Too many PVCs while sending LMI full report\n");
return;
}
}
skb = dev_alloc_skb(len);
if (!skb) {
- printk(KERN_WARNING "%s: Memory squeeze on fr_lmi_send()\n",
- dev->name);
+ netdev_warn(dev, "Memory squeeze on fr_lmi_send()\n");
return;
}
memset(skb->data, 0, len);
@@ -615,8 +612,7 @@ static void fr_timer(unsigned long arg)
state(hdlc)->last_errors <<= 1; /* Shift the list */
if (state(hdlc)->request) {
if (state(hdlc)->reliable)
- printk(KERN_INFO "%s: No LMI status reply "
- "received\n", dev->name);
+ netdev_info(dev, "No LMI status reply received\n");
state(hdlc)->last_errors |= 1;
}
@@ -628,8 +624,7 @@ static void fr_timer(unsigned long arg)
}
if (state(hdlc)->reliable != reliable) {
- printk(KERN_INFO "%s: Link %sreliable\n", dev->name,
- reliable ? "" : "un");
+ netdev_info(dev, "Link %sreliable\n", reliable ? "" : "un");
fr_set_link_state(reliable, dev);
}
@@ -665,33 +660,32 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)
if (skb->len < (lmi == LMI_ANSI ? LMI_ANSI_LENGTH :
LMI_CCITT_CISCO_LENGTH)) {
- printk(KERN_INFO "%s: Short LMI frame\n", dev->name);
+ netdev_info(dev, "Short LMI frame\n");
return 1;
}
if (skb->data[3] != (lmi == LMI_CISCO ? NLPID_CISCO_LMI :
NLPID_CCITT_ANSI_LMI)) {
- printk(KERN_INFO "%s: Received non-LMI frame with LMI DLCI\n",
- dev->name);
+ netdev_info(dev, "Received non-LMI frame with LMI DLCI\n");
return 1;
}
if (skb->data[4] != LMI_CALLREF) {
- printk(KERN_INFO "%s: Invalid LMI Call reference (0x%02X)\n",
- dev->name, skb->data[4]);
+ netdev_info(dev, "Invalid LMI Call reference (0x%02X)\n",
+ skb->data[4]);
return 1;
}
if (skb->data[5] != (dce ? LMI_STATUS_ENQUIRY : LMI_STATUS)) {
- printk(KERN_INFO "%s: Invalid LMI Message type (0x%02X)\n",
- dev->name, skb->data[5]);
+ netdev_info(dev, "Invalid LMI Message type (0x%02X)\n",
+ skb->data[5]);
return 1;
}
if (lmi == LMI_ANSI) {
if (skb->data[6] != LMI_ANSI_LOCKSHIFT) {
- printk(KERN_INFO "%s: Not ANSI locking shift in LMI"
- " message (0x%02X)\n", dev->name, skb->data[6]);
+ netdev_info(dev, "Not ANSI locking shift in LMI message (0x%02X)\n",
+ skb->data[6]);
return 1;
}
i = 7;
@@ -700,34 +694,34 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)
if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_REPTYPE :
LMI_ANSI_CISCO_REPTYPE)) {
- printk(KERN_INFO "%s: Not an LMI Report type IE (0x%02X)\n",
- dev->name, skb->data[i]);
+ netdev_info(dev, "Not an LMI Report type IE (0x%02X)\n",
+ skb->data[i]);
return 1;
}
if (skb->data[++i] != LMI_REPT_LEN) {
- printk(KERN_INFO "%s: Invalid LMI Report type IE length"
- " (%u)\n", dev->name, skb->data[i]);
+ netdev_info(dev, "Invalid LMI Report type IE length (%u)\n",
+ skb->data[i]);
return 1;
}
reptype = skb->data[++i];
if (reptype != LMI_INTEGRITY && reptype != LMI_FULLREP) {
- printk(KERN_INFO "%s: Unsupported LMI Report type (0x%02X)\n",
- dev->name, reptype);
+ netdev_info(dev, "Unsupported LMI Report type (0x%02X)\n",
+ reptype);
return 1;
}
if (skb->data[++i] != (lmi == LMI_CCITT ? LMI_CCITT_ALIVE :
LMI_ANSI_CISCO_ALIVE)) {
- printk(KERN_INFO "%s: Not an LMI Link integrity verification"
- " IE (0x%02X)\n", dev->name, skb->data[i]);
+ netdev_info(dev, "Not an LMI Link integrity verification IE (0x%02X)\n",
+ skb->data[i]);
return 1;
}
if (skb->data[++i] != LMI_INTEG_LEN) {
- printk(KERN_INFO "%s: Invalid LMI Link integrity verification"
- " IE length (%u)\n", dev->name, skb->data[i]);
+ netdev_info(dev, "Invalid LMI Link integrity verification IE length (%u)\n",
+ skb->data[i]);
return 1;
}
i++;
@@ -801,14 +795,14 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)
if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT :
LMI_ANSI_CISCO_PVCSTAT)) {
- printk(KERN_INFO "%s: Not an LMI PVC status IE"
- " (0x%02X)\n", dev->name, skb->data[i]);
+ netdev_info(dev, "Not an LMI PVC status IE (0x%02X)\n",
+ skb->data[i]);
return 1;
}
if (skb->data[++i] != stat_len) {
- printk(KERN_INFO "%s: Invalid LMI PVC status IE length"
- " (%u)\n", dev->name, skb->data[i]);
+ netdev_info(dev, "Invalid LMI PVC status IE length (%u)\n",
+ skb->data[i]);
return 1;
}
i++;
@@ -829,9 +823,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)
pvc = add_pvc(dev, dlci);
if (!pvc && !no_ram) {
- printk(KERN_WARNING
- "%s: Memory squeeze on fr_lmi_recv()\n",
- dev->name);
+ netdev_warn(dev, "Memory squeeze on fr_lmi_recv()\n");
no_ram = 1;
}
@@ -902,8 +894,8 @@ static int fr_rx(struct sk_buff *skb)
pvc = find_pvc(hdlc, dlci);
if (!pvc) {
#ifdef DEBUG_PKT
- printk(KERN_INFO "%s: No PVC for received frame's DLCI %d\n",
- frad->name, dlci);
+ netdev_info(frad, "No PVC for received frame's DLCI %d\n",
+ dlci);
#endif
dev_kfree_skb_any(skb);
return NET_RX_DROP;
@@ -962,14 +954,14 @@ static int fr_rx(struct sk_buff *skb)
break;
default:
- printk(KERN_INFO "%s: Unsupported protocol, OUI=%x "
- "PID=%x\n", frad->name, oui, pid);
+ netdev_info(frad, "Unsupported protocol, OUI=%x PID=%x\n",
+ oui, pid);
dev_kfree_skb_any(skb);
return NET_RX_DROP;
}
} else {
- printk(KERN_INFO "%s: Unsupported protocol, NLPID=%x "
- "length = %i\n", frad->name, data[3], skb->len);
+ netdev_info(frad, "Unsupported protocol, NLPID=%x length=%i\n",
+ data[3], skb->len);
dev_kfree_skb_any(skb);
return NET_RX_DROP;
}
@@ -1073,8 +1065,7 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type)
int used;
if ((pvc = add_pvc(frad, dlci)) == NULL) {
- printk(KERN_WARNING "%s: Memory squeeze on fr_add_pvc()\n",
- frad->name);
+ netdev_warn(frad, "Memory squeeze on fr_add_pvc()\n");
return -ENOBUFS;
}
@@ -1089,8 +1080,7 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type)
dev = alloc_netdev(0, "pvc%d", pvc_setup);
if (!dev) {
- printk(KERN_WARNING "%s: Memory squeeze on fr_pvc()\n",
- frad->name);
+ netdev_warn(frad, "Memory squeeze on fr_pvc()\n");
delete_unused_pvcs(hdlc);
return -ENOBUFS;
}
diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c
index 941f053..055a918 100644
--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -223,8 +223,7 @@ static void ppp_tx_cp(struct net_device *dev, u16 pid, u8 code,
skb = dev_alloc_skb(sizeof(struct hdlc_header) +
sizeof(struct cp_header) + magic_len + len);
if (!skb) {
- printk(KERN_WARNING "%s: out of memory in ppp_tx_cp()\n",
- dev->name);
+ netdev_warn(dev, "out of memory in ppp_tx_cp()\n");
return;
}
skb_reserve(skb, sizeof(struct hdlc_header));
@@ -345,7 +344,7 @@ static void ppp_cp_event(struct net_device *dev, u16 pid, u16 event, u8 code,
ppp_tx_cp(dev, pid, CP_CODE_REJ, ++ppp->seq, len, data);
if (old_state != OPENED && proto->state == OPENED) {
- printk(KERN_INFO "%s: %s up\n", dev->name, proto_name(pid));
+ netdev_info(dev, "%s up\n", proto_name(pid));
if (pid == PID_LCP) {
netif_dormant_off(dev);
ppp_cp_event(dev, PID_IPCP, START, 0, 0, 0, NULL);
@@ -356,7 +355,7 @@ static void ppp_cp_event(struct net_device *dev, u16 pid, u16 event, u8 code,
}
}
if (old_state == OPENED && proto->state != OPENED) {
- printk(KERN_INFO "%s: %s down\n", dev->name, proto_name(pid));
+ netdev_info(dev, "%s down\n", proto_name(pid));
if (pid == PID_LCP) {
netif_dormant_on(dev);
ppp_cp_event(dev, PID_IPCP, STOP, 0, 0, 0, NULL);
@@ -585,7 +584,7 @@ static void ppp_timer(unsigned long arg)
break;
if (time_after(jiffies, ppp->last_pong +
ppp->keepalive_timeout * HZ)) {
- printk(KERN_INFO "%s: Link down\n", proto->dev->name);
+ netdev_info(proto->dev, "Link down\n");
ppp_cp_event(proto->dev, PID_LCP, STOP, 0, 0, 0, NULL);
ppp_cp_event(proto->dev, PID_LCP, START, 0, 0, 0, NULL);
} else { /* send keep-alive packet */
diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c
index 70527e5..56aeb01 100644
--- a/drivers/net/wan/hdlc_x25.c
+++ b/drivers/net/wan/hdlc_x25.c
@@ -34,7 +34,7 @@ static void x25_connect_disconnect(struct net_device *dev, int reason, int code)
unsigned char *ptr;
if ((skb = dev_alloc_skb(1)) == NULL) {
- printk(KERN_ERR "%s: out of memory\n", dev->name);
+ netdev_err(dev, "out of memory\n");
return;
}
@@ -106,9 +106,8 @@ static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev)
/* Send connect confirm. msg to level 3 */
x25_connected(dev, 0);
else
- printk(KERN_ERR "%s: LAPB connect request "
- "failed, error code = %i\n",
- dev->name, result);
+ netdev_err(dev, "LAPB connect request failed, error code = %i\n",
+ result);
}
break;
@@ -118,9 +117,8 @@ static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev)
/* Send disconnect confirm. msg to level 3 */
x25_disconnected(dev, 0);
else
- printk(KERN_ERR "%s: LAPB disconnect request "
- "failed, error code = %i\n",
- dev->name, result);
+ netdev_err(dev, "LAPB disconnect request failed, error code = %i\n",
+ result);
}
break;
diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c
index 17d408f..5129ad5 100644
--- a/drivers/net/wan/n2.c
+++ b/drivers/net/wan/n2.c
@@ -16,6 +16,8 @@
* SDL Inc. PPP/HDLC/CISCO driver
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/capability.h>
@@ -341,57 +343,57 @@ static int __init n2_run(unsigned long io, unsigned long irq,
int i;
if (io < 0x200 || io > 0x3FF || (io % N2_IOPORTS) != 0) {
- printk(KERN_ERR "n2: invalid I/O port value\n");
+ pr_err("invalid I/O port value\n");
return -ENODEV;
}
if (irq < 3 || irq > 15 || irq == 6) /* FIXME */ {
- printk(KERN_ERR "n2: invalid IRQ value\n");
+ pr_err("invalid IRQ value\n");
return -ENODEV;
}
if (winbase < 0xA0000 || winbase > 0xFFFFF || (winbase & 0xFFF) != 0) {
- printk(KERN_ERR "n2: invalid RAM value\n");
+ pr_err("invalid RAM value\n");
return -ENODEV;
}
card = kzalloc(sizeof(card_t), GFP_KERNEL);
if (card == NULL) {
- printk(KERN_ERR "n2: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
return -ENOBUFS;
}
card->ports[0].dev = alloc_hdlcdev(&card->ports[0]);
card->ports[1].dev = alloc_hdlcdev(&card->ports[1]);
if (!card->ports[0].dev || !card->ports[1].dev) {
- printk(KERN_ERR "n2: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
n2_destroy_card(card);
return -ENOMEM;
}
if (!request_region(io, N2_IOPORTS, devname)) {
- printk(KERN_ERR "n2: I/O port region in use\n");
+ pr_err("I/O port region in use\n");
n2_destroy_card(card);
return -EBUSY;
}
card->io = io;
if (request_irq(irq, sca_intr, 0, devname, card)) {
- printk(KERN_ERR "n2: could not allocate IRQ\n");
+ pr_err("could not allocate IRQ\n");
n2_destroy_card(card);
return -EBUSY;
}
card->irq = irq;
if (!request_mem_region(winbase, USE_WINDOWSIZE, devname)) {
- printk(KERN_ERR "n2: could not request RAM window\n");
+ pr_err("could not request RAM window\n");
n2_destroy_card(card);
return -EBUSY;
}
card->phy_winbase = winbase;
card->winbase = ioremap(winbase, USE_WINDOWSIZE);
if (!card->winbase) {
- printk(KERN_ERR "n2: ioremap() failed\n");
+ pr_err("ioremap() failed\n");
n2_destroy_card(card);
return -EFAULT;
}
@@ -413,7 +415,7 @@ static int __init n2_run(unsigned long io, unsigned long irq,
break;
default:
- printk(KERN_ERR "n2: invalid window size\n");
+ pr_err("invalid window size\n");
n2_destroy_card(card);
return -ENODEV;
}
@@ -433,12 +435,12 @@ static int __init n2_run(unsigned long io, unsigned long irq,
card->buff_offset = (valid0 + valid1) * sizeof(pkt_desc) *
(card->tx_ring_buffers + card->rx_ring_buffers);
- printk(KERN_INFO "n2: RISCom/N2 %u KB RAM, IRQ%u, "
- "using %u TX + %u RX packets rings\n", card->ram_size / 1024,
- card->irq, card->tx_ring_buffers, card->rx_ring_buffers);
+ pr_info("RISCom/N2 %u KB RAM, IRQ%u, using %u TX + %u RX packets rings\n",
+ card->ram_size / 1024, card->irq,
+ card->tx_ring_buffers, card->rx_ring_buffers);
if (card->tx_ring_buffers < 1) {
- printk(KERN_ERR "n2: RAM test failed\n");
+ pr_err("RAM test failed\n");
n2_destroy_card(card);
return -EIO;
}
@@ -474,16 +476,14 @@ static int __init n2_run(unsigned long io, unsigned long irq,
port->card = card;
if (register_hdlc_device(dev)) {
- printk(KERN_WARNING "n2: unable to register hdlc "
- "device\n");
+ pr_warn("unable to register hdlc device\n");
port->card = NULL;
n2_destroy_card(card);
return -ENOBUFS;
}
sca_init_port(port); /* Set up SCA memory */
- printk(KERN_INFO "%s: RISCom/N2 node %d\n",
- dev->name, port->phy_node);
+ netdev_info(dev, "RISCom/N2 node %d\n", port->phy_node);
}
*new_card = card;
@@ -498,12 +498,12 @@ static int __init n2_init(void)
{
if (hw==NULL) {
#ifdef MODULE
- printk(KERN_INFO "n2: no card initialized\n");
+ pr_info("no card initialized\n");
#endif
return -EINVAL; /* no parameters specified, abort */
}
- printk(KERN_INFO "%s\n", version);
+ pr_info("%s\n", version);
do {
unsigned long io, irq, ram;
@@ -541,7 +541,7 @@ static int __init n2_init(void)
return first_card ? 0 : -EINVAL;
}while(*hw++ == ':');
- printk(KERN_ERR "n2: invalid hardware parameters\n");
+ pr_err("invalid hardware parameters\n");
return first_card ? 0 : -EINVAL;
}
diff --git a/drivers/net/wan/pc300too.c b/drivers/net/wan/pc300too.c
index c7ab3be..c49c1b3 100644
--- a/drivers/net/wan/pc300too.c
+++ b/drivers/net/wan/pc300too.c
@@ -17,6 +17,8 @@
* PC300/X21 cards.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
@@ -318,7 +320,7 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
card = kzalloc(sizeof(card_t), GFP_KERNEL);
if (card == NULL) {
- printk(KERN_ERR "pc300: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
pci_release_regions(pdev);
pci_disable_device(pdev);
return -ENOBUFS;
@@ -328,7 +330,7 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
if (pci_resource_len(pdev, 0) != PC300_PLX_SIZE ||
pci_resource_len(pdev, 2) != PC300_SCA_SIZE ||
pci_resource_len(pdev, 3) < 16384) {
- printk(KERN_ERR "pc300: invalid card EEPROM parameters\n");
+ pr_err("invalid card EEPROM parameters\n");
pc300_pci_remove_one(pdev);
return -EFAULT;
}
@@ -345,7 +347,7 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
if (card->plxbase == NULL ||
card->scabase == NULL ||
card->rambase == NULL) {
- printk(KERN_ERR "pc300: ioremap() failed\n");
+ pr_err("ioremap() failed\n");
pc300_pci_remove_one(pdev);
}
@@ -370,7 +372,7 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
for (i = 0; i < card->n_ports; i++)
if (!(card->ports[i].netdev = alloc_hdlcdev(&card->ports[i]))) {
- printk(KERN_ERR "pc300: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
pc300_pci_remove_one(pdev);
return -ENOMEM;
}
@@ -411,15 +413,14 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
card->buff_offset = card->n_ports * sizeof(pkt_desc) *
(card->tx_ring_buffers + card->rx_ring_buffers);
- printk(KERN_INFO "pc300: PC300/%s, %u KB RAM at 0x%x, IRQ%u, "
- "using %u TX + %u RX packets rings\n",
- card->type == PC300_X21 ? "X21" :
- card->type == PC300_TE ? "TE" : "RSV",
- ramsize / 1024, ramphys, pdev->irq,
- card->tx_ring_buffers, card->rx_ring_buffers);
+ pr_info("PC300/%s, %u KB RAM at 0x%x, IRQ%u, using %u TX + %u RX packets rings\n",
+ card->type == PC300_X21 ? "X21" :
+ card->type == PC300_TE ? "TE" : "RSV",
+ ramsize / 1024, ramphys, pdev->irq,
+ card->tx_ring_buffers, card->rx_ring_buffers);
if (card->tx_ring_buffers < 1) {
- printk(KERN_ERR "pc300: RAM test failed\n");
+ pr_err("RAM test failed\n");
pc300_pci_remove_one(pdev);
return -EFAULT;
}
@@ -429,8 +430,7 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
/* Allocate IRQ */
if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, "pc300", card)) {
- printk(KERN_WARNING "pc300: could not allocate IRQ%d.\n",
- pdev->irq);
+ pr_warn("could not allocate IRQ%d\n", pdev->irq);
pc300_pci_remove_one(pdev);
return -EBUSY;
}
@@ -466,15 +466,13 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
sca_init_port(port);
if (register_hdlc_device(dev)) {
- printk(KERN_ERR "pc300: unable to register hdlc "
- "device\n");
+ pr_err("unable to register hdlc device\n");
port->card = NULL;
pc300_pci_remove_one(pdev);
return -ENOBUFS;
}
- printk(KERN_INFO "%s: PC300 channel %d\n",
- dev->name, port->chan);
+ netdev_info(dev, "PC300 channel %d\n", port->chan);
}
return 0;
}
@@ -505,11 +503,11 @@ static struct pci_driver pc300_pci_driver = {
static int __init pc300_init_module(void)
{
if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
- printk(KERN_ERR "pc300: Invalid PCI clock frequency\n");
+ pr_err("Invalid PCI clock frequency\n");
return -EINVAL;
}
if (use_crystal_clock != 0 && use_crystal_clock != 1) {
- printk(KERN_ERR "pc300: Invalid 'use_crystal_clock' value\n");
+ pr_err("Invalid 'use_crystal_clock' value\n");
return -EINVAL;
}
diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c
index fd73759..1ce2116 100644
--- a/drivers/net/wan/pci200syn.c
+++ b/drivers/net/wan/pci200syn.c
@@ -14,6 +14,8 @@
* PLX Technology Inc. PCI9052 Data Book
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/capability.h>
@@ -297,7 +299,7 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
card = kzalloc(sizeof(card_t), GFP_KERNEL);
if (card == NULL) {
- printk(KERN_ERR "pci200syn: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
pci_release_regions(pdev);
pci_disable_device(pdev);
return -ENOBUFS;
@@ -306,7 +308,7 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
card->ports[0].netdev = alloc_hdlcdev(&card->ports[0]);
card->ports[1].netdev = alloc_hdlcdev(&card->ports[1]);
if (!card->ports[0].netdev || !card->ports[1].netdev) {
- printk(KERN_ERR "pci200syn: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
pci200_pci_remove_one(pdev);
return -ENOMEM;
}
@@ -314,7 +316,7 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE ||
pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE ||
pci_resource_len(pdev, 3) < 16384) {
- printk(KERN_ERR "pci200syn: invalid card EEPROM parameters\n");
+ pr_err("invalid card EEPROM parameters\n");
pci200_pci_remove_one(pdev);
return -EFAULT;
}
@@ -331,7 +333,7 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
if (card->plxbase == NULL ||
card->scabase == NULL ||
card->rambase == NULL) {
- printk(KERN_ERR "pci200syn: ioremap() failed\n");
+ pr_err("ioremap() failed\n");
pci200_pci_remove_one(pdev);
return -EFAULT;
}
@@ -357,12 +359,12 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
card->buff_offset = 2 * sizeof(pkt_desc) * (card->tx_ring_buffers +
card->rx_ring_buffers);
- printk(KERN_INFO "pci200syn: %u KB RAM at 0x%x, IRQ%u, using %u TX +"
- " %u RX packets rings\n", ramsize / 1024, ramphys,
- pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers);
+ pr_info("%u KB RAM at 0x%x, IRQ%u, using %u TX + %u RX packets rings\n",
+ ramsize / 1024, ramphys,
+ pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers);
if (card->tx_ring_buffers < 1) {
- printk(KERN_ERR "pci200syn: RAM test failed\n");
+ pr_err("RAM test failed\n");
pci200_pci_remove_one(pdev);
return -EFAULT;
}
@@ -373,8 +375,7 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
/* Allocate IRQ */
if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, "pci200syn", card)) {
- printk(KERN_WARNING "pci200syn: could not allocate IRQ%d.\n",
- pdev->irq);
+ pr_warn("could not allocate IRQ%d\n", pdev->irq);
pci200_pci_remove_one(pdev);
return -EBUSY;
}
@@ -400,15 +401,13 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
port->card = card;
sca_init_port(port);
if (register_hdlc_device(dev)) {
- printk(KERN_ERR "pci200syn: unable to register hdlc "
- "device\n");
+ pr_err("unable to register hdlc device\n");
port->card = NULL;
pci200_pci_remove_one(pdev);
return -ENOBUFS;
}
- printk(KERN_INFO "%s: PCI200SYN channel %d\n",
- dev->name, port->chan);
+ netdev_info(dev, "PCI200SYN channel %d\n", port->chan);
}
sca_flush(card);
@@ -435,7 +434,7 @@ static struct pci_driver pci200_pci_driver = {
static int __init pci200_init_module(void)
{
if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
- printk(KERN_ERR "pci200syn: Invalid PCI clock frequency\n");
+ pr_err("Invalid PCI clock frequency\n");
return -EINVAL;
}
return pci_register_driver(&pci200_pci_driver);
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index 4ea89fe..8d7aa43 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -13,6 +13,8 @@
* - wanXL100 will require minor driver modifications, no access to hw
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
@@ -102,9 +104,8 @@ static inline dma_addr_t pci_map_single_debug(struct pci_dev *pdev, void *ptr,
{
dma_addr_t addr = pci_map_single(pdev, ptr, size, direction);
if (addr + size > 0x100000000LL)
- printk(KERN_CRIT "wanXL %s: pci_map_single() returned memory"
- " at 0x%LX!\n", pci_name(pdev),
- (unsigned long long)addr);
+ pr_crit("%s: pci_map_single() returned memory at 0x%llx!\n",
+ pci_name(pdev), (unsigned long long)addr);
return addr;
}
@@ -147,8 +148,8 @@ static inline void wanxl_cable_intr(port_t *port)
}
dte = (value & STATUS_CABLE_DCE) ? " DCE" : " DTE";
}
- printk(KERN_INFO "%s: %s%s module, %s cable%s%s\n",
- port->dev->name, pm, dte, cable, dsr, dcd);
+ netdev_info(port->dev, "%s%s module, %s cable%s%s\n",
+ pm, dte, cable, dsr, dcd);
if (value & STATUS_CABLE_DCD)
netif_carrier_on(port->dev);
@@ -198,8 +199,8 @@ static inline void wanxl_rx_intr(card_t *card)
while (desc = &card->status->rx_descs[card->rx_in],
desc->stat != PACKET_EMPTY) {
if ((desc->stat & PACKET_PORT_MASK) > card->n_ports)
- printk(KERN_CRIT "wanXL %s: received packet for"
- " nonexistent port\n", pci_name(card->pdev));
+ pr_crit("%s: received packet for nonexistent port\n",
+ pci_name(card->pdev));
else {
struct sk_buff *skb = card->rx_skbs[card->rx_in];
port_t *port = &card->ports[desc->stat &
@@ -397,7 +398,7 @@ static int wanxl_open(struct net_device *dev)
int i;
if (get_status(port)->open) {
- printk(KERN_ERR "%s: port already open\n", dev->name);
+ netdev_err(dev, "port already open\n");
return -EIO;
}
if ((i = hdlc_open(dev)) != 0)
@@ -417,7 +418,7 @@ static int wanxl_open(struct net_device *dev)
}
} while (time_after(timeout, jiffies));
- printk(KERN_ERR "%s: unable to open port\n", dev->name);
+ netdev_err(dev, "unable to open port\n");
/* ask the card to close the port, should it be still alive */
writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node), dbr);
return -EFAULT;
@@ -443,7 +444,7 @@ static int wanxl_close(struct net_device *dev)
} while (time_after(timeout, jiffies));
if (get_status(port)->open)
- printk(KERN_ERR "%s: unable to close port\n", dev->name);
+ netdev_err(dev, "unable to close port\n");
netif_stop_queue(dev);
@@ -568,11 +569,7 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
int i, ports, alloc_size;
#ifndef MODULE
- static int printed_version;
- if (!printed_version) {
- printed_version++;
- printk(KERN_INFO "%s\n", version);
- }
+ pr_info_once("%s\n", version);
#endif
i = pci_enable_device(pdev);
@@ -588,7 +585,7 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
work on most platforms */
if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(28)) ||
pci_set_dma_mask(pdev, DMA_BIT_MASK(28))) {
- printk(KERN_ERR "wanXL: No usable DMA configuration\n");
+ pr_err("No usable DMA configuration\n");
return -EIO;
}
@@ -607,8 +604,7 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
alloc_size = sizeof(card_t) + ports * sizeof(port_t);
card = kzalloc(alloc_size, GFP_KERNEL);
if (card == NULL) {
- printk(KERN_ERR "wanXL %s: unable to allocate memory\n",
- pci_name(pdev));
+ pr_err("%s: unable to allocate memory\n", pci_name(pdev));
pci_release_regions(pdev);
pci_disable_device(pdev);
return -ENOBUFS;
@@ -635,7 +631,7 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
to indicate the card can do 32-bit DMA addressing */
if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) ||
pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- printk(KERN_ERR "wanXL: No usable DMA configuration\n");
+ pr_err("No usable DMA configuration\n");
wanxl_pci_remove_one(pdev);
return -EIO;
}
@@ -645,7 +641,7 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
card->plx = ioremap_nocache(plx_phy, 0x70);
if (!card->plx) {
- printk(KERN_ERR "wanxl: ioremap() failed\n");
+ pr_err("ioremap() failed\n");
wanxl_pci_remove_one(pdev);
return -EFAULT;
}
@@ -657,8 +653,8 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
timeout = jiffies + 20 * HZ;
while ((stat = readl(card->plx + PLX_MAILBOX_0)) != 0) {
if (time_before(timeout, jiffies)) {
- printk(KERN_WARNING "wanXL %s: timeout waiting for"
- " PUTS to complete\n", pci_name(pdev));
+ pr_warn("%s: timeout waiting for PUTS to complete\n",
+ pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
@@ -669,8 +665,8 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
break;
default:
- printk(KERN_WARNING "wanXL %s: PUTS test 0x%X"
- " failed\n", pci_name(pdev), stat & 0x30);
+ pr_warn("%s: PUTS test 0x%X failed\n",
+ pci_name(pdev), stat & 0x30);
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
@@ -688,17 +684,16 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
/* sanity check the board's reported memory size */
if (ramsize < BUFFERS_ADDR +
(TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports) {
- printk(KERN_WARNING "wanXL %s: no enough on-board RAM"
- " (%u bytes detected, %u bytes required)\n",
- pci_name(pdev), ramsize, BUFFERS_ADDR +
- (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports);
+ pr_warn("%s: no enough on-board RAM (%u bytes detected, %u bytes required)\n",
+ pci_name(pdev), ramsize,
+ BUFFERS_ADDR +
+ (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports);
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
if (wanxl_puts_command(card, MBX1_CMD_BSWAP)) {
- printk(KERN_WARNING "wanXL %s: unable to Set Byte Swap"
- " Mode\n", pci_name(pdev));
+ pr_warn("%s: unable to Set Byte Swap Mode\n", pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
@@ -715,7 +710,7 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
mem = ioremap_nocache(mem_phy, PDM_OFFSET + sizeof(firmware));
if (!mem) {
- printk(KERN_ERR "wanxl: ioremap() failed\n");
+ pr_err("ioremap() failed\n");
wanxl_pci_remove_one(pdev);
return -EFAULT;
}
@@ -734,8 +729,7 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
writel(0, card->plx + PLX_MAILBOX_5);
if (wanxl_puts_command(card, MBX1_CMD_ABORTJ)) {
- printk(KERN_WARNING "wanXL %s: unable to Abort and Jump\n",
- pci_name(pdev));
+ pr_warn("%s: unable to Abort and Jump\n", pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
@@ -749,8 +743,8 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
}while (time_after(timeout, jiffies));
if (!stat) {
- printk(KERN_WARNING "wanXL %s: timeout while initializing card "
- "firmware\n", pci_name(pdev));
+ pr_warn("%s: timeout while initializing card firmware\n",
+ pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
@@ -759,13 +753,13 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
ramsize = stat;
#endif
- printk(KERN_INFO "wanXL %s: at 0x%X, %u KB of RAM at 0x%X, irq %u\n",
- pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq);
+ pr_info("%s: at 0x%X, %u KB of RAM at 0x%X, irq %u\n",
+ pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq);
/* Allocate IRQ */
if (request_irq(pdev->irq, wanxl_intr, IRQF_SHARED, "wanXL", card)) {
- printk(KERN_WARNING "wanXL %s: could not allocate IRQ%i.\n",
- pci_name(pdev), pdev->irq);
+ pr_warn("%s: could not allocate IRQ%i\n",
+ pci_name(pdev), pdev->irq);
wanxl_pci_remove_one(pdev);
return -EBUSY;
}
@@ -776,8 +770,8 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
port_t *port = &card->ports[i];
struct net_device *dev = alloc_hdlcdev(port);
if (!dev) {
- printk(KERN_ERR "wanXL %s: unable to allocate"
- " memory\n", pci_name(pdev));
+ pr_err("%s: unable to allocate memory\n",
+ pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENOMEM;
}
@@ -793,8 +787,8 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
port->node = i;
get_status(port)->clocking = CLOCK_EXT;
if (register_hdlc_device(dev)) {
- printk(KERN_ERR "wanXL %s: unable to register hdlc"
- " device\n", pci_name(pdev));
+ pr_err("%s: unable to register hdlc device\n",
+ pci_name(pdev));
free_netdev(dev);
wanxl_pci_remove_one(pdev);
return -ENOBUFS;
@@ -802,11 +796,11 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
card->n_ports++;
}
- printk(KERN_INFO "wanXL %s: port", pci_name(pdev));
+ pr_info("%s: port", pci_name(pdev));
for (i = 0; i < ports; i++)
- printk("%s #%i: %s", i ? "," : "", i,
- card->ports[i].dev->name);
- printk("\n");
+ pr_cont("%s #%i: %s",
+ i ? "," : "", i, card->ports[i].dev->name);
+ pr_cont("\n");
for (i = 0; i < ports; i++)
wanxl_cable_intr(&card->ports[i]); /* get carrier status etc.*/
@@ -836,7 +830,7 @@ static struct pci_driver wanxl_pci_driver = {
static int __init wanxl_init_module(void)
{
#ifdef MODULE
- printk(KERN_INFO "%s\n", version);
+ pr_info("%s\n", version);
#endif
return pci_register_driver(&wanxl_pci_driver);
}
--
1.7.6.rc1
Use pr_fmt, pr_<level> and netdev_<level> as appropriate.
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/wan/cosa.c | 226 ++++++++++++++++++++++-------------------------
1 files changed, 106 insertions(+), 120 deletions(-)
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 6fb6f8e..6aed238 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -74,6 +74,8 @@
* The Sync PPP/Cisco HDLC layer (syncppp.c) ported to Linux by Alan Cox
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
@@ -361,14 +363,13 @@ static int __init cosa_init(void)
if (cosa_major > 0) {
if (register_chrdev(cosa_major, "cosa", &cosa_fops)) {
- printk(KERN_WARNING "cosa: unable to get major %d\n",
- cosa_major);
+ pr_warn("unable to get major %d\n", cosa_major);
err = -EIO;
goto out;
}
} else {
if (!(cosa_major=register_chrdev(0, "cosa", &cosa_fops))) {
- printk(KERN_WARNING "cosa: unable to register chardev\n");
+ pr_warn("unable to register chardev\n");
err = -EIO;
goto out;
}
@@ -378,7 +379,7 @@ static int __init cosa_init(void)
for (i=0; io[i] != 0 && i < MAX_CARDS; i++)
cosa_probe(io[i], irq[i], dma[i]);
if (!nr_cards) {
- printk(KERN_WARNING "cosa: no devices found.\n");
+ pr_warn("no devices found\n");
unregister_chrdev(cosa_major, "cosa");
err = -ENODEV;
goto out;
@@ -447,26 +448,25 @@ static int cosa_probe(int base, int irq, int dma)
/* Checking validity of parameters: */
/* IRQ should be 2-7 or 10-15; negative IRQ means autoprobe */
if ((irq >= 0 && irq < 2) || irq > 15 || (irq < 10 && irq > 7)) {
- printk (KERN_INFO "cosa_probe: invalid IRQ %d\n", irq);
+ pr_info("invalid IRQ %d\n", irq);
return -1;
}
/* I/O address should be between 0x100 and 0x3ff and should be
* multiple of 8. */
if (base < 0x100 || base > 0x3ff || base & 0x7) {
- printk (KERN_INFO "cosa_probe: invalid I/O address 0x%x\n",
- base);
+ pr_info("invalid I/O address 0x%x\n", base);
return -1;
}
/* DMA should be 0,1 or 3-7 */
if (dma < 0 || dma == 4 || dma > 7) {
- printk (KERN_INFO "cosa_probe: invalid DMA %d\n", dma);
+ pr_info("invalid DMA %d\n", dma);
return -1;
}
/* and finally, on 16-bit COSA DMA should be 4-7 and
* I/O base should not be multiple of 0x10 */
if (((base & 0x8) && dma < 4) || (!(base & 0x8) && dma > 3)) {
- printk (KERN_INFO "cosa_probe: 8/16 bit base and DMA mismatch"
- " (base=0x%x, dma=%d)\n", base, dma);
+ pr_info("8/16 bit base and DMA mismatch (base=0x%x, dma=%d)\n",
+ base, dma);
return -1;
}
@@ -479,7 +479,7 @@ static int cosa_probe(int base, int irq, int dma)
return -1;
if (cosa_reset_and_read_id(cosa, cosa->id_string) < 0) {
- printk(KERN_DEBUG "cosa: probe at 0x%x failed.\n", base);
+ printk(KERN_DEBUG "probe at 0x%x failed.\n", base);
err = -1;
goto err_out;
}
@@ -492,8 +492,7 @@ static int cosa_probe(int base, int irq, int dma)
else {
/* Print a warning only if we are not autoprobing */
#ifndef COSA_ISA_AUTOPROBE
- printk(KERN_INFO "cosa: valid signature not found at 0x%x.\n",
- base);
+ pr_info("valid signature not found at 0x%x\n", base);
#endif
err = -1;
goto err_out;
@@ -501,14 +500,14 @@ static int cosa_probe(int base, int irq, int dma)
/* Update the name of the region now we know the type of card */
release_region(base, is_8bit(cosa)?2:4);
if (!request_region(base, is_8bit(cosa)?2:4, cosa->type)) {
- printk(KERN_DEBUG "cosa: changing name at 0x%x failed.\n", base);
+ printk(KERN_DEBUG "changing name at 0x%x failed.\n", base);
return -1;
}
/* Now do IRQ autoprobe */
if (irq < 0) {
unsigned long irqs;
-/* printk(KERN_INFO "IRQ autoprobe\n"); */
+/* pr_info("IRQ autoprobe\n"); */
irqs = probe_irq_on();
/*
* Enable interrupt on tx buffer empty (it sure is)
@@ -526,13 +525,13 @@ static int cosa_probe(int base, int irq, int dma)
cosa_getdata8(cosa);
if (irq < 0) {
- printk (KERN_INFO "cosa IRQ autoprobe: multiple interrupts obtained (%d, board at 0x%x)\n",
+ pr_info("multiple interrupts obtained (%d, board at 0x%x)\n",
irq, cosa->datareg);
err = -1;
goto err_out;
}
if (irq == 0) {
- printk (KERN_INFO "cosa IRQ autoprobe: no interrupt obtained (board at 0x%x)\n",
+ pr_info("no interrupt obtained (board at 0x%x)\n",
cosa->datareg);
/* return -1; */
}
@@ -579,8 +578,7 @@ static int cosa_probe(int base, int irq, int dma)
/* Register the network interface */
if (!(chan->netdev = alloc_hdlcdev(chan))) {
- printk(KERN_WARNING "%s: alloc_hdlcdev failed.\n",
- chan->name);
+ pr_warn("%s: alloc_hdlcdev failed\n", chan->name);
goto err_hdlcdev;
}
dev_to_hdlc(chan->netdev)->attach = cosa_net_attach;
@@ -591,14 +589,14 @@ static int cosa_probe(int base, int irq, int dma)
chan->netdev->irq = chan->cosa->irq;
chan->netdev->dma = chan->cosa->dma;
if (register_hdlc_device(chan->netdev)) {
- printk(KERN_WARNING "%s: register_hdlc_device()"
- " failed.\n", chan->netdev->name);
+ netdev_warn(chan->netdev,
+ "register_hdlc_device() failed\n");
free_netdev(chan->netdev);
goto err_hdlcdev;
}
}
- printk (KERN_INFO "cosa%d: %s (%s at 0x%x irq %d dma %d), %d channels\n",
+ pr_info("cosa%d: %s (%s at 0x%x irq %d dma %d), %d channels\n",
cosa->num, cosa->id_string, cosa->type,
cosa->datareg, cosa->irq, cosa->dma, cosa->nchannels);
@@ -618,8 +616,7 @@ err_out1:
free_irq(cosa->irq, cosa);
err_out:
release_region(cosa->datareg,is_8bit(cosa)?2:4);
- printk(KERN_NOTICE "cosa%d: allocating resources failed\n",
- cosa->num);
+ pr_notice("cosa%d: allocating resources failed\n", cosa->num);
return err;
}
@@ -641,14 +638,14 @@ static int cosa_net_open(struct net_device *dev)
unsigned long flags;
if (!(chan->cosa->firmware_status & COSA_FW_START)) {
- printk(KERN_NOTICE "%s: start the firmware first (status %d)\n",
- chan->cosa->name, chan->cosa->firmware_status);
+ pr_notice("%s: start the firmware first (status %d)\n",
+ chan->cosa->name, chan->cosa->firmware_status);
return -EPERM;
}
spin_lock_irqsave(&chan->cosa->lock, flags);
if (chan->usage != 0) {
- printk(KERN_WARNING "%s: cosa_net_open called with usage count"
- " %d\n", chan->name, chan->usage);
+ pr_warn("%s: cosa_net_open called with usage count %d\n",
+ chan->name, chan->usage);
spin_unlock_irqrestore(&chan->cosa->lock, flags);
return -EBUSY;
}
@@ -736,8 +733,7 @@ static char *cosa_net_setup_rx(struct channel_data *chan, int size)
kfree_skb(chan->rx_skb);
chan->rx_skb = dev_alloc_skb(size);
if (chan->rx_skb == NULL) {
- printk(KERN_NOTICE "%s: Memory squeeze, dropping packet\n",
- chan->name);
+ pr_notice("%s: Memory squeeze, dropping packet\n", chan->name);
chan->netdev->stats.rx_dropped++;
return NULL;
}
@@ -748,8 +744,7 @@ static char *cosa_net_setup_rx(struct channel_data *chan, int size)
static int cosa_net_rx_done(struct channel_data *chan)
{
if (!chan->rx_skb) {
- printk(KERN_WARNING "%s: rx_done with empty skb!\n",
- chan->name);
+ pr_warn("%s: rx_done with empty skb!\n", chan->name);
chan->netdev->stats.rx_errors++;
chan->netdev->stats.rx_frame_errors++;
return 0;
@@ -768,8 +763,7 @@ static int cosa_net_rx_done(struct channel_data *chan)
static int cosa_net_tx_done(struct channel_data *chan, int size)
{
if (!chan->tx_skb) {
- printk(KERN_WARNING "%s: tx_done with empty skb!\n",
- chan->name);
+ pr_warn("%s: tx_done with empty skb!\n", chan->name);
chan->netdev->stats.tx_errors++;
chan->netdev->stats.tx_aborted_errors++;
return 1;
@@ -794,15 +788,15 @@ static ssize_t cosa_read(struct file *file,
char *kbuf;
if (!(cosa->firmware_status & COSA_FW_START)) {
- printk(KERN_NOTICE "%s: start the firmware first (status %d)\n",
- cosa->name, cosa->firmware_status);
+ pr_notice("%s: start the firmware first (status %d)\n",
+ cosa->name, cosa->firmware_status);
return -EPERM;
}
if (mutex_lock_interruptible(&chan->rlock))
return -ERESTARTSYS;
if ((chan->rxdata = kmalloc(COSA_MTU, GFP_DMA|GFP_KERNEL)) == NULL) {
- printk(KERN_INFO "%s: cosa_read() - OOM\n", cosa->name);
+ pr_info("%s: cosa_read() - OOM\n", cosa->name);
mutex_unlock(&chan->rlock);
return -ENOMEM;
}
@@ -869,8 +863,8 @@ static ssize_t cosa_write(struct file *file,
char *kbuf;
if (!(cosa->firmware_status & COSA_FW_START)) {
- printk(KERN_NOTICE "%s: start the firmware first (status %d)\n",
- cosa->name, cosa->firmware_status);
+ pr_notice("%s: start the firmware first (status %d)\n",
+ cosa->name, cosa->firmware_status);
return -EPERM;
}
if (down_interruptible(&chan->wsem))
@@ -881,8 +875,8 @@ static ssize_t cosa_write(struct file *file,
/* Allocate the buffer */
if ((kbuf = kmalloc(count, GFP_KERNEL|GFP_DMA)) == NULL) {
- printk(KERN_NOTICE "%s: cosa_write() OOM - dropping packet\n",
- cosa->name);
+ pr_notice("%s: cosa_write() OOM - dropping packet\n",
+ cosa->name);
up(&chan->wsem);
return -ENOMEM;
}
@@ -932,7 +926,7 @@ static int chrdev_tx_done(struct channel_data *chan, int size)
static unsigned int cosa_poll(struct file *file, poll_table *poll)
{
- printk(KERN_INFO "cosa_poll is here\n");
+ pr_info("cosa_poll is here\n");
return 0;
}
@@ -1017,15 +1011,14 @@ static inline int cosa_reset(struct cosa_data *cosa)
{
char idstring[COSA_MAX_ID_STRING];
if (cosa->usage > 1)
- printk(KERN_INFO "cosa%d: WARNING: reset requested with cosa->usage > 1 (%d). Odd things may happen.\n",
+ pr_info("cosa%d: WARNING: reset requested with cosa->usage > 1 (%d). Odd things may happen.\n",
cosa->num, cosa->usage);
cosa->firmware_status &= ~(COSA_FW_RESET|COSA_FW_START);
if (cosa_reset_and_read_id(cosa, idstring) < 0) {
- printk(KERN_NOTICE "cosa%d: reset failed\n", cosa->num);
+ pr_notice("cosa%d: reset failed\n", cosa->num);
return -EIO;
}
- printk(KERN_INFO "cosa%d: resetting device: %s\n", cosa->num,
- idstring);
+ pr_info("cosa%d: resetting device: %s\n", cosa->num, idstring);
cosa->firmware_status |= COSA_FW_RESET;
return 0;
}
@@ -1037,11 +1030,11 @@ static inline int cosa_download(struct cosa_data *cosa, void __user *arg)
int i;
if (cosa->usage > 1)
- printk(KERN_INFO "%s: WARNING: download of microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
+ pr_info("%s: WARNING: download of microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
cosa->name, cosa->usage);
if (!(cosa->firmware_status & COSA_FW_RESET)) {
- printk(KERN_NOTICE "%s: reset the card first (status %d).\n",
- cosa->name, cosa->firmware_status);
+ pr_notice("%s: reset the card first (status %d)\n",
+ cosa->name, cosa->firmware_status);
return -EPERM;
}
@@ -1059,11 +1052,11 @@ static inline int cosa_download(struct cosa_data *cosa, void __user *arg)
i = download(cosa, d.code, d.len, d.addr);
if (i < 0) {
- printk(KERN_NOTICE "cosa%d: microcode download failed: %d\n",
- cosa->num, i);
+ pr_notice("cosa%d: microcode download failed: %d\n",
+ cosa->num, i);
return -EIO;
}
- printk(KERN_INFO "cosa%d: downloading microcode - 0x%04x bytes at 0x%04x\n",
+ pr_info("cosa%d: downloading microcode - 0x%04x bytes at 0x%04x\n",
cosa->num, d.len, d.addr);
cosa->firmware_status |= COSA_FW_RESET|COSA_FW_DOWNLOAD;
return 0;
@@ -1076,12 +1069,11 @@ static inline int cosa_readmem(struct cosa_data *cosa, void __user *arg)
int i;
if (cosa->usage > 1)
- printk(KERN_INFO "cosa%d: WARNING: readmem requested with "
- "cosa->usage > 1 (%d). Odd things may happen.\n",
+ pr_info("cosa%d: WARNING: readmem requested with cosa->usage > 1 (%d). Odd things may happen.\n",
cosa->num, cosa->usage);
if (!(cosa->firmware_status & COSA_FW_RESET)) {
- printk(KERN_NOTICE "%s: reset the card first (status %d).\n",
- cosa->name, cosa->firmware_status);
+ pr_notice("%s: reset the card first (status %d)\n",
+ cosa->name, cosa->firmware_status);
return -EPERM;
}
@@ -1093,11 +1085,10 @@ static inline int cosa_readmem(struct cosa_data *cosa, void __user *arg)
i = readmem(cosa, d.code, d.len, d.addr);
if (i < 0) {
- printk(KERN_NOTICE "cosa%d: reading memory failed: %d\n",
- cosa->num, i);
+ pr_notice("cosa%d: reading memory failed: %d\n", cosa->num, i);
return -EIO;
}
- printk(KERN_INFO "cosa%d: reading card memory - 0x%04x bytes at 0x%04x\n",
+ pr_info("cosa%d: reading card memory - 0x%04x bytes at 0x%04x\n",
cosa->num, d.len, d.addr);
cosa->firmware_status |= COSA_FW_RESET;
return 0;
@@ -1109,23 +1100,22 @@ static inline int cosa_start(struct cosa_data *cosa, int address)
int i;
if (cosa->usage > 1)
- printk(KERN_INFO "cosa%d: WARNING: start microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
+ pr_info("cosa%d: WARNING: start microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
cosa->num, cosa->usage);
if ((cosa->firmware_status & (COSA_FW_RESET|COSA_FW_DOWNLOAD))
!= (COSA_FW_RESET|COSA_FW_DOWNLOAD)) {
- printk(KERN_NOTICE "%s: download the microcode and/or reset the card first (status %d).\n",
- cosa->name, cosa->firmware_status);
+ pr_notice("%s: download the microcode and/or reset the card first (status %d)\n",
+ cosa->name, cosa->firmware_status);
return -EPERM;
}
cosa->firmware_status &= ~COSA_FW_RESET;
if ((i=startmicrocode(cosa, address)) < 0) {
- printk(KERN_NOTICE "cosa%d: start microcode at 0x%04x failed: %d\n",
- cosa->num, address, i);
+ pr_notice("cosa%d: start microcode at 0x%04x failed: %d\n",
+ cosa->num, address, i);
return -EIO;
}
- printk(KERN_INFO "cosa%d: starting microcode at 0x%04x\n",
- cosa->num, address);
+ pr_info("cosa%d: starting microcode at 0x%04x\n", cosa->num, address);
cosa->startaddr = address;
cosa->firmware_status |= COSA_FW_START;
return 0;
@@ -1255,11 +1245,11 @@ static int cosa_start_tx(struct channel_data *chan, char *buf, int len)
#ifdef DEBUG_DATA
int i;
- printk(KERN_INFO "cosa%dc%d: starting tx(0x%x)", chan->cosa->num,
- chan->num, len);
+ pr_info("cosa%dc%d: starting tx(0x%x)",
+ chan->cosa->num, chan->num, len);
for (i=0; i<len; i++)
- printk(" %02x", buf[i]&0xff);
- printk("\n");
+ pr_cont(" %02x", buf[i]&0xff);
+ pr_cont("\n");
#endif
spin_lock_irqsave(&cosa->lock, flags);
chan->txbuf = buf;
@@ -1353,7 +1343,7 @@ static void cosa_kick(struct cosa_data *cosa)
if (test_bit(TXBIT, &cosa->rxtx))
s = "TX DMA";
- printk(KERN_INFO "%s: %s timeout - restarting.\n", cosa->name, s);
+ pr_info("%s: %s timeout - restarting\n", cosa->name, s);
spin_lock_irqsave(&cosa->lock, flags);
cosa->rxtx = 0;
@@ -1387,7 +1377,7 @@ static int cosa_dma_able(struct channel_data *chan, char *buf, int len)
return 0;
if ((b^ (b+len)) & 0x10000) {
if (count++ < 5)
- printk(KERN_INFO "%s: packet spanning a 64k boundary\n",
+ pr_info("%s: packet spanning a 64k boundary\n",
chan->name);
return 0;
}
@@ -1498,8 +1488,7 @@ static int readmem(struct cosa_data *cosa, char __user *microcode, int length, i
char c;
int i;
if ((i=get_wait_data(cosa)) == -1) {
- printk (KERN_INFO "cosa: 0x%04x bytes remaining\n",
- length);
+ pr_info("0x%04x bytes remaining\n", length);
return -11;
}
c=i;
@@ -1582,14 +1571,15 @@ static int get_wait_data(struct cosa_data *cosa)
short r;
r = cosa_getdata8(cosa);
#if 0
- printk(KERN_INFO "cosa: get_wait_data returning after %d retries\n", 999-retries);
+ pr_info("get_wait_data returning after %d retries\n",
+ 999-retries);
#endif
return r;
}
/* sleep if not ready to read */
schedule_timeout_interruptible(1);
}
- printk(KERN_INFO "cosa: timeout in get_wait_data (status 0x%x)\n",
+ pr_info("timeout in get_wait_data (status 0x%x)\n",
cosa_getstatus(cosa));
return -1;
}
@@ -1607,7 +1597,7 @@ static int put_wait_data(struct cosa_data *cosa, int data)
if (cosa_getstatus(cosa) & SR_TX_RDY) {
cosa_putdata8(cosa, data);
#if 0
- printk(KERN_INFO "Putdata: %d retries\n", 999-retries);
+ pr_info("Putdata: %d retries\n", 999-retries);
#endif
return 0;
}
@@ -1616,7 +1606,7 @@ static int put_wait_data(struct cosa_data *cosa, int data)
schedule_timeout_interruptible(1);
#endif
}
- printk(KERN_INFO "cosa%d: timeout in put_wait_data (status 0x%x)\n",
+ pr_info("cosa%d: timeout in put_wait_data (status 0x%x)\n",
cosa->num, cosa_getstatus(cosa));
return -1;
}
@@ -1636,13 +1626,13 @@ static int puthexnumber(struct cosa_data *cosa, int number)
sprintf(temp, "%04X", number);
for (i=0; i<4; i++) {
if (put_wait_data(cosa, temp[i]) == -1) {
- printk(KERN_NOTICE "cosa%d: puthexnumber failed to write byte %d\n",
- cosa->num, i);
+ pr_notice("cosa%d: puthexnumber failed to write byte %d\n",
+ cosa->num, i);
return -1-2*i;
}
if (get_wait_data(cosa) != temp[i]) {
- printk(KERN_NOTICE "cosa%d: puthexhumber failed to read echo of byte %d\n",
- cosa->num, i);
+ pr_notice("cosa%d: puthexhumber failed to read echo of byte %d\n",
+ cosa->num, i);
return -2-2*i;
}
}
@@ -1687,8 +1677,7 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
{
unsigned long flags, flags1;
#ifdef DEBUG_IRQS
- printk(KERN_INFO "cosa%d: SR_DOWN_REQUEST status=0x%04x\n",
- cosa->num, status);
+ pr_info("cosa%d: SR_DOWN_REQUEST status=0x%04x\n", cosa->num, status);
#endif
spin_lock_irqsave(&cosa->lock, flags);
set_bit(TXBIT, &cosa->rxtx);
@@ -1696,8 +1685,7 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
/* flow control, see the comment above */
int i=0;
if (!cosa->txbitmap) {
- printk(KERN_WARNING "%s: No channel wants data "
- "in TX IRQ. Expect DMA timeout.",
+ pr_warn("%s: No channel wants data in TX IRQ. Expect DMA timeout.\n",
cosa->name);
put_driver_status_nolock(cosa);
clear_bit(TXBIT, &cosa->rxtx);
@@ -1780,14 +1768,14 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
if (cosa->busmaster) {
unsigned long addr = virt_to_bus(cosa->txbuf);
int count=0;
- printk(KERN_INFO "busmaster IRQ\n");
+ pr_info("busmaster IRQ\n");
while (!(cosa_getstatus(cosa)&SR_TX_RDY)) {
count++;
udelay(10);
if (count > 1000) break;
}
- printk(KERN_INFO "status %x\n", cosa_getstatus(cosa));
- printk(KERN_INFO "ready after %d loops\n", count);
+ pr_info("status %x\n", cosa_getstatus(cosa));
+ pr_info("ready after %d loops\n", count);
cosa_putdata16(cosa, (addr >> 16)&0xffff);
count = 0;
@@ -1796,7 +1784,7 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
if (count > 1000) break;
udelay(10);
}
- printk(KERN_INFO "ready after %d loops\n", count);
+ pr_info("ready after %d loops\n", count);
cosa_putdata16(cosa, addr &0xffff);
flags1 = claim_dma_lock();
set_dma_mode(cosa->dma, DMA_MODE_CASCADE);
@@ -1824,7 +1812,7 @@ static inline void rx_interrupt(struct cosa_data *cosa, int status)
{
unsigned long flags;
#ifdef DEBUG_IRQS
- printk(KERN_INFO "cosa%d: SR_UP_REQUEST\n", cosa->num);
+ pr_info("cosa%d: SR_UP_REQUEST\n", cosa->num);
#endif
spin_lock_irqsave(&cosa->lock, flags);
@@ -1847,7 +1835,7 @@ static inline void rx_interrupt(struct cosa_data *cosa, int status)
debug_data_in(cosa, cosa->rxsize & 0xff);
#endif
#if 0
- printk(KERN_INFO "cosa%d: receive rxsize = (0x%04x).\n",
+ pr_info("cosa%d: receive rxsize = (0x%04x)\n",
cosa->num, cosa->rxsize);
#endif
}
@@ -1857,12 +1845,12 @@ static inline void rx_interrupt(struct cosa_data *cosa, int status)
debug_data_in(cosa, cosa->rxsize);
#endif
#if 0
- printk(KERN_INFO "cosa%d: receive rxsize = (0x%04x).\n",
+ pr_info("cosa%d: receive rxsize = (0x%04x)\n",
cosa->num, cosa->rxsize);
#endif
}
if (((cosa->rxsize & 0xe000) >> 13) >= cosa->nchannels) {
- printk(KERN_WARNING "%s: rx for unknown channel (0x%04x)\n",
+ pr_warn("%s: rx for unknown channel (0x%04x)\n",
cosa->name, cosa->rxsize);
spin_unlock_irqrestore(&cosa->lock, flags);
goto reject;
@@ -1877,7 +1865,7 @@ static inline void rx_interrupt(struct cosa_data *cosa, int status)
if (!cosa->rxbuf) {
reject: /* Reject the packet */
- printk(KERN_INFO "cosa%d: rejecting packet on channel %d\n",
+ pr_info("cosa%d: rejecting packet on channel %d\n",
cosa->num, cosa->rxchan->num);
cosa->rxbuf = cosa->bouncebuf;
}
@@ -1924,11 +1912,11 @@ static inline void eot_interrupt(struct cosa_data *cosa, int status)
#ifdef DEBUG_DATA
{
int i;
- printk(KERN_INFO "cosa%dc%d: done rx(0x%x)", cosa->num,
- cosa->rxchan->num, cosa->rxsize);
+ pr_info("cosa%dc%d: done rx(0x%x)",
+ cosa->num, cosa->rxchan->num, cosa->rxsize);
for (i=0; i<cosa->rxsize; i++)
- printk (" %02x", cosa->rxbuf[i]&0xff);
- printk("\n");
+ pr_cont(" %02x", cosa->rxbuf[i]&0xff);
+ pr_cont("\n");
}
#endif
/* Packet for unknown channel? */
@@ -1940,8 +1928,7 @@ static inline void eot_interrupt(struct cosa_data *cosa, int status)
if (cosa->rxchan->rx_done(cosa->rxchan))
clear_bit(cosa->rxchan->num, &cosa->rxbitmap);
} else {
- printk(KERN_NOTICE "cosa%d: unexpected EOT interrupt\n",
- cosa->num);
+ pr_notice("cosa%d: unexpected EOT interrupt\n", cosa->num);
}
/*
* Clear the RXBIT, TXBIT and IRQBIT (the latest should be
@@ -1963,8 +1950,7 @@ static irqreturn_t cosa_interrupt(int irq, void *cosa_)
again:
status = cosa_getstatus(cosa);
#ifdef DEBUG_IRQS
- printk(KERN_INFO "cosa%d: got IRQ, status 0x%02x\n", cosa->num,
- status & 0xff);
+ pr_info("cosa%d: got IRQ, status 0x%02x\n", cosa->num, status & 0xff);
#endif
#ifdef DEBUG_IO
debug_status_in(cosa, status);
@@ -1985,15 +1971,15 @@ again:
udelay(100);
goto again;
}
- printk(KERN_INFO "cosa%d: unknown status 0x%02x in IRQ after %d retries\n",
+ pr_info("cosa%d: unknown status 0x%02x in IRQ after %d retries\n",
cosa->num, status & 0xff, count);
}
#ifdef DEBUG_IRQS
if (count)
- printk(KERN_INFO "%s: %d-times got unknown status in IRQ\n",
+ pr_info("%s: %d-times got unknown status in IRQ\n",
cosa->name, count);
else
- printk(KERN_INFO "%s: returning from IRQ\n", cosa->name);
+ pr_info("%s: returning from IRQ\n", cosa->name);
#endif
return IRQ_HANDLED;
}
@@ -2024,41 +2010,41 @@ static void debug_status_in(struct cosa_data *cosa, int status)
s = "NO_REQ";
break;
}
- printk(KERN_INFO "%s: IO: status -> 0x%02x (%s%s%s%s)\n",
+ pr_info("%s: IO: status -> 0x%02x (%s%s%s%s)\n",
cosa->name,
status,
- status & SR_USR_RQ ? "USR_RQ|":"",
- status & SR_TX_RDY ? "TX_RDY|":"",
- status & SR_RX_RDY ? "RX_RDY|":"",
+ status & SR_USR_RQ ? "USR_RQ|" : "",
+ status & SR_TX_RDY ? "TX_RDY|" : "",
+ status & SR_RX_RDY ? "RX_RDY|" : "",
s);
}
static void debug_status_out(struct cosa_data *cosa, int status)
{
- printk(KERN_INFO "%s: IO: status <- 0x%02x (%s%s%s%s%s%s)\n",
+ pr_info("%s: IO: status <- 0x%02x (%s%s%s%s%s%s)\n",
cosa->name,
status,
- status & SR_RX_DMA_ENA ? "RXDMA|":"!rxdma|",
- status & SR_TX_DMA_ENA ? "TXDMA|":"!txdma|",
- status & SR_RST ? "RESET|":"",
- status & SR_USR_INT_ENA ? "USRINT|":"!usrint|",
- status & SR_TX_INT_ENA ? "TXINT|":"!txint|",
- status & SR_RX_INT_ENA ? "RXINT":"!rxint");
+ status & SR_RX_DMA_ENA ? "RXDMA|" : "!rxdma|",
+ status & SR_TX_DMA_ENA ? "TXDMA|" : "!txdma|",
+ status & SR_RST ? "RESET|" : "",
+ status & SR_USR_INT_ENA ? "USRINT|" : "!usrint|",
+ status & SR_TX_INT_ENA ? "TXINT|" : "!txint|",
+ status & SR_RX_INT_ENA ? "RXINT" : "!rxint");
}
static void debug_data_in(struct cosa_data *cosa, int data)
{
- printk(KERN_INFO "%s: IO: data -> 0x%04x\n", cosa->name, data);
+ pr_info("%s: IO: data -> 0x%04x\n", cosa->name, data);
}
static void debug_data_out(struct cosa_data *cosa, int data)
{
- printk(KERN_INFO "%s: IO: data <- 0x%04x\n", cosa->name, data);
+ pr_info("%s: IO: data <- 0x%04x\n", cosa->name, data);
}
static void debug_data_cmd(struct cosa_data *cosa, int data)
{
- printk(KERN_INFO "%s: IO: data <- 0x%04x (%s|%s)\n",
+ pr_info("%s: IO: data <- 0x%04x (%s|%s)\n",
cosa->name, data,
data & SR_RDY_RCV ? "RX_RDY" : "!rx_rdy",
data & SR_RDY_SND ? "TX_RDY" : "!tx_rdy");
--
1.7.6.rc1
Use pr_fmt, pr_<level> and netdev_<level> as appropriate.
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/wan/cycx_drv.c | 81 +++++++++-----------
drivers/net/wan/cycx_main.c | 31 ++++----
drivers/net/wan/cycx_x25.c | 177 ++++++++++++++++++++-----------------------
3 files changed, 133 insertions(+), 156 deletions(-)
diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c
index 164c362..2a3ecae 100644
--- a/drivers/net/wan/cycx_drv.c
+++ b/drivers/net/wan/cycx_drv.c
@@ -48,6 +48,8 @@
* Aug 8, 1998 acme Initial version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h> /* __init */
#include <linux/module.h>
#include <linux/kernel.h> /* printk(), and other useful stuff */
@@ -81,10 +83,9 @@ static u16 checksum(u8 *buf, u32 len);
/* Global Data */
/* private data */
-static const char modname[] = "cycx_drv";
static const char fullname[] = "Cyclom 2X Support Module";
-static const char copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo "
- "<[email protected]>";
+static const char copyright[] =
+ "(c) 1998-2003 Arnaldo Carvalho de Melo <[email protected]>";
/* Hardware configuration options.
* These are arrays of configuration options used by verification routines.
@@ -110,8 +111,8 @@ static const long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 };
static int __init cycx_drv_init(void)
{
- printk(KERN_INFO "%s v%u.%u %s\n", fullname, MOD_VERSION, MOD_RELEASE,
- copyright);
+ pr_info("%s v%u.%u %s\n",
+ fullname, MOD_VERSION, MOD_RELEASE, copyright);
return 0;
}
@@ -139,18 +140,16 @@ int cycx_setup(struct cycx_hw *hw, void *cfm, u32 len, unsigned long dpmbase)
/* Verify IRQ configuration options */
if (!get_option_index(cycx_2x_irq_options, hw->irq)) {
- printk(KERN_ERR "%s: IRQ %d is invalid!\n", modname, hw->irq);
+ pr_err("IRQ %d is invalid!\n", hw->irq);
return -EINVAL;
}
/* Setup adapter dual-port memory window and test memory */
if (!dpmbase) {
- printk(KERN_ERR "%s: you must specify the dpm address!\n",
- modname);
+ pr_err("you must specify the dpm address!\n");
return -EINVAL;
} else if (!get_option_index(cyc2x_dpmbase_options, dpmbase)) {
- printk(KERN_ERR "%s: memory address 0x%lX is invalid!\n",
- modname, dpmbase);
+ pr_err("memory address 0x%lX is invalid!\n", dpmbase);
return -EINVAL;
}
@@ -158,13 +157,12 @@ int cycx_setup(struct cycx_hw *hw, void *cfm, u32 len, unsigned long dpmbase)
hw->dpmsize = CYCX_WINDOWSIZE;
if (!detect_cyc2x(hw->dpmbase)) {
- printk(KERN_ERR "%s: adapter Cyclom 2X not found at "
- "address 0x%lX!\n", modname, dpmbase);
+ pr_err("adapter Cyclom 2X not found at address 0x%lX!\n",
+ dpmbase);
return -EINVAL;
}
- printk(KERN_INFO "%s: found Cyclom 2X card at address 0x%lX.\n",
- modname, dpmbase);
+ pr_info("found Cyclom 2X card at address 0x%lX\n", dpmbase);
/* Load firmware. If loader fails then shut down adapter */
err = load_cyc2x(hw, cfm, len);
@@ -339,7 +337,7 @@ static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len)
for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ)
if (buffer_load(addr, code + i,
min_t(u32, CFM_LOAD_BUFSZ, (len - i))) < 0) {
- printk(KERN_ERR "%s: Error !!\n", modname);
+ pr_err("Error !!\n");
return -1;
}
@@ -370,7 +368,7 @@ static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len)
for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ)
if (buffer_load(addr, code + i,
min_t(u32, CFM_LOAD_BUFSZ, (len - i)))) {
- printk(KERN_ERR "%s: Error !!\n", modname);
+ pr_err("Error !!\n");
return -1;
}
@@ -391,23 +389,20 @@ static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len)
u16 cksum;
/* Announce */
- printk(KERN_INFO "%s: firmware signature=\"%s\"\n", modname,
- cfm->signature);
+ pr_info("firmware signature=\"%s\"\n", cfm->signature);
/* Verify firmware signature */
if (strcmp(cfm->signature, CFM_SIGNATURE)) {
- printk(KERN_ERR "%s:load_cyc2x: not Cyclom-2X firmware!\n",
- modname);
+ pr_err("load_cyc2x: not Cyclom-2X firmware!\n");
return -EINVAL;
}
- printk(KERN_INFO "%s: firmware version=%u\n", modname, cfm->version);
+ pr_info("firmware version=%u\n", cfm->version);
/* Verify firmware module format version */
if (cfm->version != CFM_VERSION) {
- printk(KERN_ERR "%s:%s: firmware format %u rejected! "
- "Expecting %u.\n",
- modname, __func__, cfm->version, CFM_VERSION);
+ pr_err("%s: firmware format %u rejected! Expecting %u.\n",
+ __func__, cfm->version, CFM_VERSION);
return -EINVAL;
}
@@ -419,23 +414,22 @@ static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len)
if (((len - sizeof(struct cycx_firmware) - 1) != cfm->info.codesize) ||
*/
if (cksum != cfm->checksum) {
- printk(KERN_ERR "%s:%s: firmware corrupted!\n",
- modname, __func__);
- printk(KERN_ERR " cdsize = 0x%x (expected 0x%lx)\n",
- len - (int)sizeof(struct cycx_firmware) - 1,
- cfm->info.codesize);
- printk(KERN_ERR " chksum = 0x%x (expected 0x%x)\n",
- cksum, cfm->checksum);
+ pr_err("%s: firmware corrupted!\n", __func__);
+ pr_err(" cdsize = 0x%x (expected 0x%lx)\n",
+ len - (int)sizeof(struct cycx_firmware) - 1,
+ cfm->info.codesize);
+ pr_err(" chksum = 0x%x (expected 0x%x)\n",
+ cksum, cfm->checksum);
return -EINVAL;
}
/* If everything is ok, set reset, data and code pointers */
img_hdr = (struct cycx_fw_header *)&cfm->image;
#ifdef FIRMWARE_DEBUG
- printk(KERN_INFO "%s:%s: image sizes\n", __func__, modname);
- printk(KERN_INFO " reset=%lu\n", img_hdr->reset_size);
- printk(KERN_INFO " data=%lu\n", img_hdr->data_size);
- printk(KERN_INFO " code=%lu\n", img_hdr->code_size);
+ pr_info("%s: image sizes\n", __func__);
+ pr_info(" reset=%lu\n", img_hdr->reset_size);
+ pr_info(" data=%lu\n", img_hdr->data_size);
+ pr_info(" code=%lu\n", img_hdr->code_size);
#endif
reset_image = ((u8 *)img_hdr) + sizeof(struct cycx_fw_header);
data_image = reset_image + img_hdr->reset_size;
@@ -443,15 +437,14 @@ static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len)
/*---- Start load ----*/
/* Announce */
- printk(KERN_INFO "%s: loading firmware %s (ID=%u)...\n", modname,
- cfm->descr[0] ? cfm->descr : "unknown firmware",
- cfm->info.codeid);
+ pr_info("loading firmware %s (ID=%u)...\n",
+ cfm->descr[0] ? cfm->descr : "unknown firmware",
+ cfm->info.codeid);
for (i = 0 ; i < 5 ; i++) {
/* Reset Cyclom hardware */
if (!reset_cyc2x(hw->dpmbase)) {
- printk(KERN_ERR "%s: dpm problem or board not found\n",
- modname);
+ pr_err("dpm problem or board not found\n");
return -EINVAL;
}
@@ -468,19 +461,19 @@ static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len)
msleep_interruptible(1 * 1000);
}
- printk(KERN_ERR "%s: reset not started.\n", modname);
+ pr_err("reset not started\n");
return -EINVAL;
reset_loaded:
/* Load data.bin */
if (cycx_data_boot(hw->dpmbase, data_image, img_hdr->data_size)) {
- printk(KERN_ERR "%s: cannot load data file.\n", modname);
+ pr_err("cannot load data file\n");
return -EINVAL;
}
/* Load code.bin */
if (cycx_code_boot(hw->dpmbase, code_image, img_hdr->code_size)) {
- printk(KERN_ERR "%s: cannot load code file.\n", modname);
+ pr_err("cannot load code file\n");
return -EINVAL;
}
@@ -493,7 +486,7 @@ reset_loaded:
/* Arthur Ganzert's tip: wait a while after the firmware loading...
seg abr 26 17:17:12 EST 1999 - acme */
msleep_interruptible(7 * 1000);
- printk(KERN_INFO "%s: firmware loaded!\n", modname);
+ pr_info("firmware loaded!\n");
/* enable interrupts */
cycx_inten(hw);
diff --git a/drivers/net/wan/cycx_main.c b/drivers/net/wan/cycx_main.c
index a0976d1..81fbbad 100644
--- a/drivers/net/wan/cycx_main.c
+++ b/drivers/net/wan/cycx_main.c
@@ -40,6 +40,8 @@
* 1998/08/08 acme Initial version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/stddef.h> /* offsetof(), etc. */
#include <linux/errno.h> /* return codes */
#include <linux/string.h> /* inline memset(), etc. */
@@ -107,7 +109,7 @@ static int __init cycx_init(void)
{
int cnt, err = -ENOMEM;
- printk(KERN_INFO "%s v%u.%u %s\n",
+ pr_info("%s v%u.%u %s\n",
cycx_fullname, CYCX_DRV_VERSION, CYCX_DRV_RELEASE,
cycx_copyright);
@@ -133,9 +135,8 @@ static int __init cycx_init(void)
err = register_wan_device(wandev);
if (err) {
- printk(KERN_ERR "%s: %s registration failed with "
- "error %d!\n",
- cycx_drvname, card->devname, err);
+ pr_err("%s registration failed with error %d!\n",
+ card->devname, err);
break;
}
}
@@ -198,14 +199,13 @@ static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf)
rc = -EINVAL;
if (!conf->data_size || !conf->data) {
- printk(KERN_ERR "%s: firmware not found in configuration "
- "data!\n", wandev->name);
+ pr_err("%s: firmware not found in configuration data!\n",
+ wandev->name);
goto out;
}
if (conf->irq <= 0) {
- printk(KERN_ERR "%s: can't configure without IRQ!\n",
- wandev->name);
+ pr_err("%s: can't configure without IRQ!\n", wandev->name);
goto out;
}
@@ -213,8 +213,7 @@ static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf)
irq = conf->irq == 2 ? 9 : conf->irq; /* IRQ2 -> IRQ9 */
if (request_irq(irq, cycx_isr, 0, wandev->name, card)) {
- printk(KERN_ERR "%s: can't reserve IRQ %d!\n",
- wandev->name, irq);
+ pr_err("%s: can't reserve IRQ %d!\n", wandev->name, irq);
goto out;
}
@@ -246,8 +245,7 @@ static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf)
break;
#endif
default:
- printk(KERN_ERR "%s: this firmware is not supported!\n",
- wandev->name);
+ pr_err("%s: this firmware is not supported!\n", wandev->name);
rc = -EINVAL;
}
@@ -288,8 +286,7 @@ static int cycx_wan_shutdown(struct wan_device *wandev)
card = wandev->private;
wandev->state = WAN_UNCONFIGURED;
cycx_down(&card->hw);
- printk(KERN_INFO "%s: irq %d being freed!\n", wandev->name,
- wandev->irq);
+ pr_info("%s: irq %d being freed!\n", wandev->name, wandev->irq);
free_irq(wandev->irq, card);
out: return ret;
}
@@ -308,8 +305,8 @@ static irqreturn_t cycx_isr(int irq, void *dev_id)
goto out;
if (card->in_isr) {
- printk(KERN_WARNING "%s: interrupt re-entrancy on IRQ %d!\n",
- card->devname, card->wandev.irq);
+ pr_warn("%s: interrupt re-entrancy on IRQ %d!\n",
+ card->devname, card->wandev.irq);
goto out;
}
@@ -337,7 +334,7 @@ void cycx_set_state(struct cycx_device *card, int state)
string_state = "disconnected!";
break;
}
- printk(KERN_INFO "%s: link %s\n", card->devname, string_state);
+ pr_info("%s: link %s\n", card->devname, string_state);
card->wandev.state = state;
}
diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c
index cf9e15f..06f3f63 100644
--- a/drivers/net/wan/cycx_x25.c
+++ b/drivers/net/wan/cycx_x25.c
@@ -76,6 +76,8 @@
* 1998/08/08 acme Initial version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define CYCLOMX_X25_DEBUG 1
#include <linux/ctype.h> /* isdigit() */
@@ -230,8 +232,8 @@ int cycx_x25_wan_init(struct cycx_device *card, wandev_conf_t *conf)
/* Verify configuration ID */
if (conf->config_id != WANCONFIG_X25) {
- printk(KERN_INFO "%s: invalid configuration ID %u!\n",
- card->devname, conf->config_id);
+ pr_info("%s: invalid configuration ID %u!\n",
+ card->devname, conf->config_id);
return -EINVAL;
}
@@ -374,8 +376,7 @@ static int cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev,
int err = 0;
if (!conf->name[0] || strlen(conf->name) > WAN_IFNAME_SZ) {
- printk(KERN_INFO "%s: invalid interface name!\n",
- card->devname);
+ pr_info("%s: invalid interface name!\n", card->devname);
return -EINVAL;
}
@@ -398,8 +399,8 @@ static int cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev,
if (len) {
if (len > WAN_ADDRESS_SZ) {
- printk(KERN_ERR "%s: %s local addr too long!\n",
- wandev->name, chan->name);
+ pr_err("%s: %s local addr too long!\n",
+ wandev->name, chan->name);
err = -EINVAL;
goto error;
} else {
@@ -429,15 +430,14 @@ static int cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev,
if (lcn >= card->u.x.lo_pvc && lcn <= card->u.x.hi_pvc)
chan->lcn = lcn;
else {
- printk(KERN_ERR
- "%s: PVC %u is out of range on interface %s!\n",
- wandev->name, lcn, chan->name);
+ pr_err("%s: PVC %u is out of range on interface %s!\n",
+ wandev->name, lcn, chan->name);
err = -EINVAL;
goto error;
}
} else {
- printk(KERN_ERR "%s: invalid media address on interface %s!\n",
- wandev->name, chan->name);
+ pr_err("%s: invalid media address on interface %s!\n",
+ wandev->name, chan->name);
err = -EINVAL;
goto error;
}
@@ -607,9 +607,8 @@ static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
++chan->ifstats.tx_dropped;
else if (chan->svc && chan->protocol &&
chan->protocol != ntohs(skb->protocol)) {
- printk(KERN_INFO
- "%s: unsupported Ethertype 0x%04X on interface %s!\n",
- card->devname, ntohs(skb->protocol), dev->name);
+ pr_info("%s: unsupported Ethertype 0x%04X on interface %s!\n",
+ card->devname, ntohs(skb->protocol), dev->name);
++chan->ifstats.tx_errors;
} else if (chan->protocol == ETH_P_IP) {
switch (chan->state) {
@@ -643,9 +642,8 @@ static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
cycx_x25_chan_disconnect(dev);
goto free_packet;
default:
- printk(KERN_INFO
- "%s: unknown %d x25-iface request on %s!\n",
- card->devname, skb->data[0], dev->name);
+ pr_info("%s: unknown %d x25-iface request on %s!\n",
+ card->devname, skb->data[0], dev->name);
++chan->ifstats.tx_errors;
goto free_packet;
}
@@ -746,8 +744,7 @@ static void cycx_x25_irq_tx(struct cycx_device *card, struct cycx_x25_cmd *cmd)
card->buff_int_mode_unbusy = 1;
netif_wake_queue(dev);
} else
- printk(KERN_ERR "%s:ackvc for inexistent lcn %d\n",
- card->devname, lcn);
+ pr_err("%s:ackvc for inexistent lcn %d\n", card->devname, lcn);
}
/* Receive interrupt handler.
@@ -780,8 +777,8 @@ static void cycx_x25_irq_rx(struct cycx_device *card, struct cycx_x25_cmd *cmd)
dev = cycx_x25_get_dev_by_lcn(wandev, lcn);
if (!dev) {
/* Invalid channel, discard packet */
- printk(KERN_INFO "%s: receiving on orphaned LCN %d!\n",
- card->devname, lcn);
+ pr_info("%s: receiving on orphaned LCN %d!\n",
+ card->devname, lcn);
return;
}
@@ -802,8 +799,8 @@ static void cycx_x25_irq_rx(struct cycx_device *card, struct cycx_x25_cmd *cmd)
if ((skb = dev_alloc_skb((chan->protocol == ETH_P_X25 ? 1 : 0) +
bufsize +
dev->hard_header_len)) == NULL) {
- printk(KERN_INFO "%s: no socket buffers available!\n",
- card->devname);
+ pr_info("%s: no socket buffers available!\n",
+ card->devname);
chan->drop_sequence = 1;
++chan->ifstats.rx_dropped;
return;
@@ -826,8 +823,8 @@ static void cycx_x25_irq_rx(struct cycx_device *card, struct cycx_x25_cmd *cmd)
if (bitm)
chan->drop_sequence = 1;
- printk(KERN_INFO "%s: unexpectedly long packet sequence "
- "on interface %s!\n", card->devname, dev->name);
+ pr_info("%s: unexpectedly long packet sequence on interface %s!\n",
+ card->devname, dev->name);
++chan->ifstats.rx_length_errors;
return;
}
@@ -880,8 +877,8 @@ static void cycx_x25_irq_connect(struct cycx_device *card,
dev = cycx_x25_get_dev_by_dte_addr(wandev, rem);
if (!dev) {
/* Invalid channel, discard packet */
- printk(KERN_INFO "%s: connect not expected: remote %s!\n",
- card->devname, rem);
+ pr_info("%s: connect not expected: remote %s!\n",
+ card->devname, rem);
return;
}
@@ -909,8 +906,8 @@ static void cycx_x25_irq_connect_confirm(struct cycx_device *card,
if (!dev) {
/* Invalid channel, discard packet */
clear_bit(--key, (void*)&card->u.x.connection_keys);
- printk(KERN_INFO "%s: connect confirm not expected: lcn %d, "
- "key=%d!\n", card->devname, lcn, key);
+ pr_info("%s: connect confirm not expected: lcn %d, key=%d!\n",
+ card->devname, lcn, key);
return;
}
@@ -934,8 +931,8 @@ static void cycx_x25_irq_disconnect_confirm(struct cycx_device *card,
dev = cycx_x25_get_dev_by_lcn(wandev, lcn);
if (!dev) {
/* Invalid channel, discard packet */
- printk(KERN_INFO "%s:disconnect confirm not expected!:lcn %d\n",
- card->devname, lcn);
+ pr_info("%s:disconnect confirm not expected!:lcn %d\n",
+ card->devname, lcn);
return;
}
@@ -980,13 +977,13 @@ static void cycx_x25_irq_log(struct cycx_device *card, struct cycx_x25_cmd *cmd)
cycx_peek(&card->hw, cmd->buf + 10 + toread, &code, 1);
cycx_peek(&card->hw, cmd->buf + 10 + toread + 1, &routine, 1);
- printk(KERN_INFO "cycx_x25_irq_handler: X25_LOG (0x4500) indic.:\n");
- printk(KERN_INFO "cmd->buf=0x%X\n", cmd->buf);
- printk(KERN_INFO "Log message code=0x%X\n", msg_code);
- printk(KERN_INFO "Link=%d\n", link);
- printk(KERN_INFO "log code=0x%X\n", code);
- printk(KERN_INFO "log routine=0x%X\n", routine);
- printk(KERN_INFO "Message size=%d\n", size);
+ pr_info("cycx_x25_irq_handler: X25_LOG (0x4500) indic.:\n");
+ pr_info("cmd->buf=0x%X\n", cmd->buf);
+ pr_info("Log message code=0x%X\n", msg_code);
+ pr_info("Link=%d\n", link);
+ pr_info("log code=0x%X\n", code);
+ pr_info("log routine=0x%X\n", routine);
+ pr_info("Message size=%d\n", size);
hex_dump("Message", bf, toread);
#endif
}
@@ -1009,24 +1006,14 @@ static void cycx_x25_irq_stat(struct cycx_device *card,
static void cycx_x25_irq_spurious(struct cycx_device *card,
struct cycx_x25_cmd *cmd)
{
- printk(KERN_INFO "%s: spurious interrupt (0x%X)!\n",
- card->devname, cmd->command);
+ pr_info("%s: spurious interrupt (0x%X)!\n",
+ card->devname, cmd->command);
}
#ifdef CYCLOMX_X25_DEBUG
static void hex_dump(char *msg, unsigned char *p, int len)
{
- unsigned char hex[1024],
- * phex = hex;
-
- if (len >= (sizeof(hex) / 2))
- len = (sizeof(hex) / 2) - 1;
-
- while (len--) {
- sprintf(phex, "%02x", *p++);
- phex += 2;
- }
-
- printk(KERN_INFO "%s: %s\n", msg, hex);
+ print_hex_dump(KERN_INFO, msg, DUMP_PREFIX_OFFSET, 16, 1,
+ p, len, true);
}
#endif
@@ -1203,8 +1190,8 @@ static int x25_place_call(struct cycx_device *card,
u8 key;
if (card->u.x.connection_keys == ~0U) {
- printk(KERN_INFO "%s: too many simultaneous connection "
- "requests!\n", card->devname);
+ pr_info("%s: too many simultaneous connection requests!\n",
+ card->devname);
return -EAGAIN;
}
@@ -1381,8 +1368,8 @@ static void cycx_x25_chan_timer(unsigned long d)
if (chan->state == WAN_CONNECTED)
cycx_x25_chan_disconnect(dev);
else
- printk(KERN_ERR "%s: %s for svc (%s) not connected!\n",
- chan->card->devname, __func__, dev->name);
+ pr_err("%s: %s for svc (%s) not connected!\n",
+ chan->card->devname, __func__, dev->name);
}
/* Set logical channel state. */
@@ -1433,8 +1420,8 @@ static void cycx_x25_set_chan_state(struct net_device *dev, u8 state)
break;
}
- printk(KERN_INFO "%s: interface %s %s\n", card->devname,
- dev->name, string_state);
+ pr_info("%s: interface %s %s\n",
+ card->devname, dev->name, string_state);
chan->state = state;
}
@@ -1488,7 +1475,7 @@ static void cycx_x25_chan_send_event(struct net_device *dev, u8 event)
unsigned char *ptr;
if ((skb = dev_alloc_skb(1)) == NULL) {
- printk(KERN_ERR "%s: out of memory\n", __func__);
+ pr_err("%s: out of memory\n", __func__);
return;
}
@@ -1557,56 +1544,56 @@ static void reset_timer(struct net_device *dev)
#ifdef CYCLOMX_X25_DEBUG
static void cycx_x25_dump_config(struct cycx_x25_config *conf)
{
- printk(KERN_INFO "X.25 configuration\n");
- printk(KERN_INFO "-----------------\n");
- printk(KERN_INFO "link number=%d\n", conf->link);
- printk(KERN_INFO "line speed=%d\n", conf->speed);
- printk(KERN_INFO "clock=%sternal\n", conf->clock == 8 ? "Ex" : "In");
- printk(KERN_INFO "# level 2 retransm.=%d\n", conf->n2);
- printk(KERN_INFO "level 2 window=%d\n", conf->n2win);
- printk(KERN_INFO "level 3 window=%d\n", conf->n3win);
- printk(KERN_INFO "# logical channels=%d\n", conf->nvc);
- printk(KERN_INFO "level 3 pkt len=%d\n", conf->pktlen);
- printk(KERN_INFO "my address=%d\n", conf->locaddr);
- printk(KERN_INFO "remote address=%d\n", conf->remaddr);
- printk(KERN_INFO "t1=%d seconds\n", conf->t1);
- printk(KERN_INFO "t2=%d seconds\n", conf->t2);
- printk(KERN_INFO "t21=%d seconds\n", conf->t21);
- printk(KERN_INFO "# PVCs=%d\n", conf->npvc);
- printk(KERN_INFO "t23=%d seconds\n", conf->t23);
- printk(KERN_INFO "flags=0x%x\n", conf->flags);
+ pr_info("X.25 configuration\n");
+ pr_info("-----------------\n");
+ pr_info("link number=%d\n", conf->link);
+ pr_info("line speed=%d\n", conf->speed);
+ pr_info("clock=%sternal\n", conf->clock == 8 ? "Ex" : "In");
+ pr_info("# level 2 retransm.=%d\n", conf->n2);
+ pr_info("level 2 window=%d\n", conf->n2win);
+ pr_info("level 3 window=%d\n", conf->n3win);
+ pr_info("# logical channels=%d\n", conf->nvc);
+ pr_info("level 3 pkt len=%d\n", conf->pktlen);
+ pr_info("my address=%d\n", conf->locaddr);
+ pr_info("remote address=%d\n", conf->remaddr);
+ pr_info("t1=%d seconds\n", conf->t1);
+ pr_info("t2=%d seconds\n", conf->t2);
+ pr_info("t21=%d seconds\n", conf->t21);
+ pr_info("# PVCs=%d\n", conf->npvc);
+ pr_info("t23=%d seconds\n", conf->t23);
+ pr_info("flags=0x%x\n", conf->flags);
}
static void cycx_x25_dump_stats(struct cycx_x25_stats *stats)
{
- printk(KERN_INFO "X.25 statistics\n");
- printk(KERN_INFO "--------------\n");
- printk(KERN_INFO "rx_crc_errors=%d\n", stats->rx_crc_errors);
- printk(KERN_INFO "rx_over_errors=%d\n", stats->rx_over_errors);
- printk(KERN_INFO "n2_tx_frames=%d\n", stats->n2_tx_frames);
- printk(KERN_INFO "n2_rx_frames=%d\n", stats->n2_rx_frames);
- printk(KERN_INFO "tx_timeouts=%d\n", stats->tx_timeouts);
- printk(KERN_INFO "rx_timeouts=%d\n", stats->rx_timeouts);
- printk(KERN_INFO "n3_tx_packets=%d\n", stats->n3_tx_packets);
- printk(KERN_INFO "n3_rx_packets=%d\n", stats->n3_rx_packets);
- printk(KERN_INFO "tx_aborts=%d\n", stats->tx_aborts);
- printk(KERN_INFO "rx_aborts=%d\n", stats->rx_aborts);
+ pr_info("X.25 statistics\n");
+ pr_info("--------------\n");
+ pr_info("rx_crc_errors=%d\n", stats->rx_crc_errors);
+ pr_info("rx_over_errors=%d\n", stats->rx_over_errors);
+ pr_info("n2_tx_frames=%d\n", stats->n2_tx_frames);
+ pr_info("n2_rx_frames=%d\n", stats->n2_rx_frames);
+ pr_info("tx_timeouts=%d\n", stats->tx_timeouts);
+ pr_info("rx_timeouts=%d\n", stats->rx_timeouts);
+ pr_info("n3_tx_packets=%d\n", stats->n3_tx_packets);
+ pr_info("n3_rx_packets=%d\n", stats->n3_rx_packets);
+ pr_info("tx_aborts=%d\n", stats->tx_aborts);
+ pr_info("rx_aborts=%d\n", stats->rx_aborts);
}
static void cycx_x25_dump_devs(struct wan_device *wandev)
{
struct net_device *dev = wandev->dev;
- printk(KERN_INFO "X.25 dev states\n");
- printk(KERN_INFO "name: addr: txoff: protocol:\n");
- printk(KERN_INFO "---------------------------------------\n");
+ pr_info("X.25 dev states\n");
+ pr_info("name: addr: txoff: protocol:\n");
+ pr_info("---------------------------------------\n");
while(dev) {
struct cycx_x25_channel *chan = netdev_priv(dev);
- printk(KERN_INFO "%-5.5s %-15.15s %d ETH_P_%s\n",
- chan->name, chan->addr, netif_queue_stopped(dev),
- chan->protocol == ETH_P_IP ? "IP" : "X25");
+ pr_info("%-5.5s %-15.15s %d ETH_P_%s\n",
+ chan->name, chan->addr, netif_queue_stopped(dev),
+ chan->protocol == ETH_P_IP ? "IP" : "X25");
dev = chan->slave;
}
}
--
1.7.6.rc1
Use pr_fmt, pr_<level> and netdev_<level> as appropriate.
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/wan/dlci.c | 22 +++++++++++++------
drivers/net/wan/sdla.c | 52 +++++++++++++++++++++++++++--------------------
2 files changed, 45 insertions(+), 29 deletions(-)
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
index 21b104d..48ab38a 100644
--- a/drivers/net/wan/dlci.c
+++ b/drivers/net/wan/dlci.c
@@ -28,6 +28,8 @@
* 2 of the License, or (at your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
@@ -112,8 +114,7 @@ static void dlci_receive(struct sk_buff *skb, struct net_device *dev)
dlp = netdev_priv(dev);
if (!pskb_may_pull(skb, sizeof(*hdr))) {
- printk(KERN_NOTICE "%s: invalid data no header\n",
- dev->name);
+ netdev_notice(dev, "invalid data no header\n");
dev->stats.rx_errors++;
kfree_skb(skb);
return;
@@ -126,7 +127,8 @@ static void dlci_receive(struct sk_buff *skb, struct net_device *dev)
if (hdr->control != FRAD_I_UI)
{
- printk(KERN_NOTICE "%s: Invalid header flag 0x%02X.\n", dev->name, hdr->control);
+ netdev_notice(dev, "Invalid header flag 0x%02X\n",
+ hdr->control);
dev->stats.rx_errors++;
}
else
@@ -135,14 +137,18 @@ static void dlci_receive(struct sk_buff *skb, struct net_device *dev)
case FRAD_P_PADDING:
if (hdr->NLPID != FRAD_P_SNAP)
{
- printk(KERN_NOTICE "%s: Unsupported NLPID 0x%02X.\n", dev->name, hdr->NLPID);
+ netdev_notice(dev, "Unsupported NLPID 0x%02X\n",
+ hdr->NLPID);
dev->stats.rx_errors++;
break;
}
if (hdr->OUI[0] + hdr->OUI[1] + hdr->OUI[2] != 0)
{
- printk(KERN_NOTICE "%s: Unsupported organizationally unique identifier 0x%02X-%02X-%02X.\n", dev->name, hdr->OUI[0], hdr->OUI[1], hdr->OUI[2]);
+ netdev_notice(dev, "Unsupported organizationally unique identifier 0x%02X-%02X-%02X\n",
+ hdr->OUI[0],
+ hdr->OUI[1],
+ hdr->OUI[2]);
dev->stats.rx_errors++;
break;
}
@@ -163,12 +169,14 @@ static void dlci_receive(struct sk_buff *skb, struct net_device *dev)
case FRAD_P_SNAP:
case FRAD_P_Q933:
case FRAD_P_CLNP:
- printk(KERN_NOTICE "%s: Unsupported NLPID 0x%02X.\n", dev->name, hdr->pad);
+ netdev_notice(dev, "Unsupported NLPID 0x%02X\n",
+ hdr->pad);
dev->stats.rx_errors++;
break;
default:
- printk(KERN_NOTICE "%s: Invalid pad byte 0x%02X.\n", dev->name, hdr->pad);
+ netdev_notice(dev, "Invalid pad byte 0x%02X\n",
+ hdr->pad);
dev->stats.rx_errors++;
break;
}
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
index 3f4e2b5..c853161 100644
--- a/drivers/net/wan/sdla.c
+++ b/drivers/net/wan/sdla.c
@@ -32,6 +32,8 @@
* 2 of the License, or (at your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
@@ -350,24 +352,24 @@ static void sdla_errors(struct net_device *dev, int cmd, int dlci, int ret, int
case SDLA_RET_MODEM:
state = data;
if (*state & SDLA_MODEM_DCD_LOW)
- printk(KERN_INFO "%s: Modem DCD unexpectedly low!\n", dev->name);
+ netdev_info(dev, "Modem DCD unexpectedly low!\n");
if (*state & SDLA_MODEM_CTS_LOW)
- printk(KERN_INFO "%s: Modem CTS unexpectedly low!\n", dev->name);
+ netdev_info(dev, "Modem CTS unexpectedly low!\n");
/* I should probably do something about this! */
break;
case SDLA_RET_CHANNEL_OFF:
- printk(KERN_INFO "%s: Channel became inoperative!\n", dev->name);
+ netdev_info(dev, "Channel became inoperative!\n");
/* same here */
break;
case SDLA_RET_CHANNEL_ON:
- printk(KERN_INFO "%s: Channel became operative!\n", dev->name);
+ netdev_info(dev, "Channel became operative!\n");
/* same here */
break;
case SDLA_RET_DLCI_STATUS:
- printk(KERN_INFO "%s: Status change reported by Access Node.\n", dev->name);
+ netdev_info(dev, "Status change reported by Access Node\n");
len /= sizeof(struct _dlci_stat);
for(pstatus = data, i=0;i < len;i++,pstatus++)
{
@@ -382,29 +384,32 @@ static void sdla_errors(struct net_device *dev, int cmd, int dlci, int ret, int
sprintf(line, "unknown status: %02X", pstatus->flags);
state = line;
}
- printk(KERN_INFO "%s: DLCI %i: %s.\n", dev->name, pstatus->dlci, state);
+ netdev_info(dev, "DLCI %i: %s\n",
+ pstatus->dlci, state);
/* same here */
}
break;
case SDLA_RET_DLCI_UNKNOWN:
- printk(KERN_INFO "%s: Received unknown DLCIs:", dev->name);
+ netdev_info(dev, "Received unknown DLCIs:");
len /= sizeof(short);
for(pdlci = data,i=0;i < len;i++,pdlci++)
- printk(" %i", *pdlci);
- printk("\n");
+ pr_cont(" %i", *pdlci);
+ pr_cont("\n");
break;
case SDLA_RET_TIMEOUT:
- printk(KERN_ERR "%s: Command timed out!\n", dev->name);
+ netdev_err(dev, "Command timed out!\n");
break;
case SDLA_RET_BUF_OVERSIZE:
- printk(KERN_INFO "%s: Bc/CIR overflow, acceptable size is %i\n", dev->name, len);
+ netdev_info(dev, "Bc/CIR overflow, acceptable size is %i\n",
+ len);
break;
case SDLA_RET_BUF_TOO_BIG:
- printk(KERN_INFO "%s: Buffer size over specified max of %i\n", dev->name, len);
+ netdev_info(dev, "Buffer size over specified max of %i\n",
+ len);
break;
case SDLA_RET_CHANNEL_INACTIVE:
@@ -415,7 +420,8 @@ static void sdla_errors(struct net_device *dev, int cmd, int dlci, int ret, int
break;
default:
- printk(KERN_DEBUG "%s: Cmd 0x%2.2X generated return code 0x%2.2X\n", dev->name, cmd, ret);
+ netdev_dbg(dev, "Cmd 0x%02X generated return code 0x%02X\n",
+ cmd, ret);
/* Further processing could be done here */
break;
}
@@ -678,12 +684,14 @@ static netdev_tx_t sdla_transmit(struct sk_buff *skb,
case ARPHRD_FRAD:
if (skb->dev->type != ARPHRD_DLCI)
{
- printk(KERN_WARNING "%s: Non DLCI device, type %i, tried to send on FRAD module.\n", dev->name, skb->dev->type);
+ netdev_warn(dev, "Non DLCI device, type %i, tried to send on FRAD module\n",
+ skb->dev->type);
accept = 0;
}
break;
default:
- printk(KERN_WARNING "%s: unknown firmware type 0x%4.4X\n", dev->name, dev->type);
+ netdev_warn(dev, "unknown firmware type 0x%04X\n",
+ dev->type);
accept = 0;
break;
}
@@ -807,7 +815,8 @@ static void sdla_receive(struct net_device *dev)
if (i == CONFIG_DLCI_MAX)
{
- printk(KERN_NOTICE "%s: Received packet from invalid DLCI %i, ignoring.", dev->name, dlci);
+ netdev_notice(dev, "Received packet from invalid DLCI %i, ignoring\n",
+ dlci);
dev->stats.rx_errors++;
success = 0;
}
@@ -819,7 +828,7 @@ static void sdla_receive(struct net_device *dev)
skb = dev_alloc_skb(len + sizeof(struct frhdr));
if (skb == NULL)
{
- printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
+ netdev_notice(dev, "Memory squeeze, dropping packet\n");
dev->stats.rx_dropped++;
success = 0;
}
@@ -880,8 +889,7 @@ static irqreturn_t sdla_isr(int dummy, void *dev_id)
if (!flp->initialized)
{
- printk(KERN_WARNING "%s: irq %d for uninitialized device.\n",
- dev->name, dev->irq);
+ netdev_warn(dev, "irq %d for uninitialized device\n", dev->irq);
return IRQ_NONE;
}
@@ -901,7 +909,7 @@ static irqreturn_t sdla_isr(int dummy, void *dev_id)
case SDLA_INTR_TX:
case SDLA_INTR_COMPLETE:
case SDLA_INTR_TIMER:
- printk(KERN_WARNING "%s: invalid irq flag 0x%02X.\n", dev->name, byte);
+ netdev_warn(dev, "invalid irq flag 0x%02X\n", byte);
break;
}
@@ -1347,7 +1355,7 @@ static int sdla_set_config(struct net_device *dev, struct ifmap *map)
return -EINVAL;
if (!request_region(map->base_addr, SDLA_IO_EXTENTS, dev->name)){
- printk(KERN_WARNING "SDLA: io-port 0x%04lx in use\n", dev->base_addr);
+ pr_warn("io-port 0x%04lx in use\n", dev->base_addr);
return -EINVAL;
}
base = map->base_addr;
@@ -1412,7 +1420,7 @@ static int sdla_set_config(struct net_device *dev, struct ifmap *map)
}
}
- printk(KERN_NOTICE "%s: Unknown card type\n", dev->name);
+ netdev_notice(dev, "Unknown card type\n");
err = -ENODEV;
goto fail;
--
1.7.6.rc1
Use pr_fmt, pr_<level> and netdev_<level> as appropriate.
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/wan/dscc4.c | 80 ++++++++++++++++++++++------------------------
1 files changed, 38 insertions(+), 42 deletions(-)
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 3590d58..058e169 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -80,6 +80,8 @@
* - misc crapectomy.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/types.h>
@@ -553,7 +555,7 @@ static int dscc4_wait_ack_cec(struct dscc4_dev_priv *dpriv,
schedule_timeout_uninterruptible(10);
rmb();
} while (++i > 0);
- printk(KERN_ERR "%s: %s timeout\n", dev->name, msg);
+ netdev_err(dev, "%s timeout\n", msg);
done:
return (i >= 0) ? i : -EAGAIN;
}
@@ -569,18 +571,18 @@ static int dscc4_do_action(struct net_device *dev, char *msg)
u32 state = readl(ioaddr);
if (state & ArAck) {
- printk(KERN_DEBUG "%s: %s ack\n", dev->name, msg);
+ netdev_dbg(dev, "%s ack\n", msg);
writel(ArAck, ioaddr);
goto done;
} else if (state & Arf) {
- printk(KERN_ERR "%s: %s failed\n", dev->name, msg);
+ netdev_err(dev, "%s failed\n", msg);
writel(Arf, ioaddr);
i = -1;
goto done;
}
rmb();
} while (++i > 0);
- printk(KERN_ERR "%s: %s timeout\n", dev->name, msg);
+ netdev_err(dev, "%s timeout\n", msg);
done:
return i;
}
@@ -636,7 +638,7 @@ static void dscc4_tx_reset(struct dscc4_dev_priv *dpriv, struct net_device *dev)
writel(MTFi|Rdt, dpriv->base_addr + dpriv->dev_id*0x0c + CH0CFG);
if (dscc4_do_action(dev, "Rdt") < 0)
- printk(KERN_ERR "%s: Tx reset failed\n", dev->name);
+ netdev_err(dev, "Tx reset failed\n");
}
#endif
@@ -722,22 +724,20 @@ static int __devinit dscc4_init_one(struct pci_dev *pdev,
rc = pci_request_region(pdev, 0, "registers");
if (rc < 0) {
- printk(KERN_ERR "%s: can't reserve MMIO region (regs)\n",
- DRV_NAME);
+ pr_err("can't reserve MMIO region (regs)\n");
goto err_disable_0;
}
rc = pci_request_region(pdev, 1, "LBI interface");
if (rc < 0) {
- printk(KERN_ERR "%s: can't reserve MMIO region (lbi)\n",
- DRV_NAME);
+ pr_err("can't reserve MMIO region (lbi)\n");
goto err_free_mmio_region_1;
}
ioaddr = pci_ioremap_bar(pdev, 0);
if (!ioaddr) {
- printk(KERN_ERR "%s: cannot remap MMIO region %llx @ %llx\n",
- DRV_NAME, (unsigned long long)pci_resource_len(pdev, 0),
- (unsigned long long)pci_resource_start(pdev, 0));
+ pr_err("cannot remap MMIO region %llx @ %llx\n",
+ (unsigned long long)pci_resource_len(pdev, 0),
+ (unsigned long long)pci_resource_start(pdev, 0));
rc = -EIO;
goto err_free_mmio_regions_2;
}
@@ -757,7 +757,7 @@ static int __devinit dscc4_init_one(struct pci_dev *pdev,
rc = request_irq(pdev->irq, dscc4_irq, IRQF_SHARED, DRV_NAME, priv->root);
if (rc < 0) {
- printk(KERN_WARNING "%s: IRQ %d busy\n", DRV_NAME, pdev->irq);
+ pr_warn("IRQ %d busy\n", pdev->irq);
goto err_release_4;
}
@@ -904,7 +904,7 @@ static int dscc4_found1(struct pci_dev *pdev, void __iomem *ioaddr)
root = kcalloc(dev_per_card, sizeof(*root), GFP_KERNEL);
if (!root) {
- printk(KERN_ERR "%s: can't allocate data\n", DRV_NAME);
+ pr_err("can't allocate data\n");
goto err_out;
}
@@ -916,7 +916,7 @@ static int dscc4_found1(struct pci_dev *pdev, void __iomem *ioaddr)
ppriv = kzalloc(sizeof(*ppriv), GFP_KERNEL);
if (!ppriv) {
- printk(KERN_ERR "%s: can't allocate private data\n", DRV_NAME);
+ pr_err("can't allocate private data\n");
goto err_free_dev;
}
@@ -952,7 +952,7 @@ static int dscc4_found1(struct pci_dev *pdev, void __iomem *ioaddr)
ret = register_hdlc_device(d);
if (ret < 0) {
- printk(KERN_ERR "%s: unable to register\n", DRV_NAME);
+ pr_err("unable to register\n");
dscc4_release_ring(dpriv);
goto err_unregister;
}
@@ -1005,7 +1005,7 @@ static int dscc4_loopback_check(struct dscc4_dev_priv *dpriv)
if (settings->loopback && (settings->clock_type != CLOCK_INT)) {
struct net_device *dev = dscc4_to_dev(dpriv);
- printk(KERN_INFO "%s: loopback requires clock\n", dev->name);
+ netdev_info(dev, "loopback requires clock\n");
return -1;
}
return 0;
@@ -1078,7 +1078,7 @@ static int dscc4_open(struct net_device *dev)
scc_patchl(0, PowerUp, dpriv, dev, CCR0);
scc_patchl(0, 0x00050000, dpriv, dev, CCR2);
scc_writel(EventsMask, dpriv, dev, IMR);
- printk(KERN_INFO "%s: up again.\n", dev->name);
+ netdev_info(dev, "up again\n");
goto done;
}
@@ -1095,11 +1095,11 @@ static int dscc4_open(struct net_device *dev)
* situations.
*/
if (scc_readl_star(dpriv, dev) & SccBusy) {
- printk(KERN_ERR "%s busy. Try later\n", dev->name);
+ netdev_err(dev, "busy - try later\n");
ret = -EAGAIN;
goto err_out;
} else
- printk(KERN_INFO "%s: available. Good\n", dev->name);
+ netdev_info(dev, "available - good\n");
scc_writel(EventsMask, dpriv, dev, IMR);
@@ -1117,7 +1117,7 @@ static int dscc4_open(struct net_device *dev)
* reset is needed. Suggestions anyone ?
*/
if ((ret = dscc4_xpr_ack(dpriv)) < 0) {
- printk(KERN_ERR "%s: %s timeout\n", DRV_NAME, "XPR");
+ pr_err("XPR timeout\n");
goto err_disable_scc_events;
}
@@ -1342,8 +1342,7 @@ static int dscc4_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
return -EPERM;
if (dpriv->flags & FakeReset) {
- printk(KERN_INFO "%s: please reset the device"
- " before this command\n", dev->name);
+ netdev_info(dev, "please reset the device before this command\n");
return -EPERM;
}
if (copy_from_user(&dpriv->settings, line, size))
@@ -1506,8 +1505,7 @@ static irqreturn_t dscc4_irq(int irq, void *token)
writel(state, ioaddr + GSTAR);
if (state & Arf) {
- printk(KERN_ERR "%s: failure (Arf). Harass the maintener\n",
- dev->name);
+ netdev_err(dev, "failure (Arf). Harass the maintainer\n");
goto out;
}
state &= ~ArAck;
@@ -1515,7 +1513,7 @@ static irqreturn_t dscc4_irq(int irq, void *token)
if (debug > 0)
printk(KERN_DEBUG "%s: CfgIV\n", DRV_NAME);
if (priv->iqcfg[priv->cfg_cur++%IRQ_RING_SIZE] & cpu_to_le32(Arf))
- printk(KERN_ERR "%s: %s failed\n", dev->name, "CFG");
+ netdev_err(dev, "CFG failed\n");
if (!(state &= ~Cfg))
goto out;
}
@@ -1596,8 +1594,8 @@ try:
++dpriv->tx_dirty;
} else {
if (debug > 1)
- printk(KERN_ERR "%s Tx: NULL skb %d\n",
- dev->name, cur);
+ netdev_err(dev, "Tx: NULL skb %d\n",
+ cur);
}
/*
* If the driver ends sending crap on the wire, it
@@ -1616,7 +1614,7 @@ try:
* Transmit Data Underrun
*/
if (state & Xdu) {
- printk(KERN_ERR "%s: XDU. Ask maintainer\n", DRV_NAME);
+ netdev_err(dev, "Tx Data Underrun. Ask maintainer\n");
dpriv->flags = NeedIDT;
/* Tx reset */
writel(MTFi | Rdt,
@@ -1625,13 +1623,13 @@ try:
return;
}
if (state & Cts) {
- printk(KERN_INFO "%s: CTS transition\n", dev->name);
+ netdev_info(dev, "CTS transition\n");
if (!(state &= ~Cts)) /* DEBUG */
goto try;
}
if (state & Xmr) {
/* Frame needs to be sent again - FIXME */
- printk(KERN_ERR "%s: Xmr. Ask maintainer\n", DRV_NAME);
+ netdev_err(dev, "Tx ReTx. Ask maintainer\n");
if (!(state &= ~Xmr)) /* DEBUG */
goto try;
}
@@ -1649,7 +1647,7 @@ try:
break;
}
if (!i)
- printk(KERN_INFO "%s busy in irq\n", dev->name);
+ netdev_info(dev, "busy in irq\n");
scc_addr = dpriv->base_addr + 0x0c*dpriv->dev_id;
/* Keep this order: IDT before IDR */
@@ -1686,7 +1684,7 @@ try:
}
if (state & Cd) {
if (debug > 0)
- printk(KERN_INFO "%s: CD transition\n", dev->name);
+ netdev_info(dev, "CD transition\n");
if (!(state &= ~Cd)) /* DEBUG */
goto try;
}
@@ -1695,11 +1693,11 @@ try:
#ifdef DSCC4_POLLING
while (!dscc4_tx_poll(dpriv, dev));
#endif
- printk(KERN_INFO "%s: Tx Hi\n", dev->name);
+ netdev_info(dev, "Tx Hi\n");
state &= ~Hi;
}
if (state & Err) {
- printk(KERN_INFO "%s: Tx ERR\n", dev->name);
+ netdev_info(dev, "Tx ERR\n");
dev->stats.tx_errors++;
state &= ~Err;
}
@@ -1769,7 +1767,7 @@ try:
goto try;
}
if (state & Hi ) { /* HI bit */
- printk(KERN_INFO "%s: Rx Hi\n", dev->name);
+ netdev_info(dev, "Rx Hi\n");
state &= ~Hi;
goto try;
}
@@ -1800,7 +1798,7 @@ try:
goto try;
}
if (state & Cts) {
- printk(KERN_INFO "%s: CTS transition\n", dev->name);
+ netdev_info(dev, "CTS transition\n");
if (!(state &= ~Cts)) /* DEBUG */
goto try;
}
@@ -1859,14 +1857,12 @@ try:
sizeof(struct RxFD), scc_addr + CH0BRDA);
writel(MTFi|Rdr|Idr, scc_addr + CH0CFG);
if (dscc4_do_action(dev, "RDR") < 0) {
- printk(KERN_ERR "%s: RDO recovery failed(%s)\n",
- dev->name, "RDR");
+ netdev_err(dev, "RDO recovery failed(RDR)\n");
goto rdo_end;
}
writel(MTFi|Idr, scc_addr + CH0CFG);
if (dscc4_do_action(dev, "IDR") < 0) {
- printk(KERN_ERR "%s: RDO recovery failed(%s)\n",
- dev->name, "IDR");
+ netdev_err(dev, "RDO recovery failed(IDR)\n");
goto rdo_end;
}
rdo_end:
@@ -1875,7 +1871,7 @@ try:
goto try;
}
if (state & Cd) {
- printk(KERN_INFO "%s: CD transition\n", dev->name);
+ netdev_info(dev, "CD transition\n");
if (!(state &= ~Cd)) /* DEBUG */
goto try;
}
--
1.7.6.rc1
Use pr_fmt, pr_<level> and netdev_<level> as appropriate.
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/wan/farsync.c | 7 +++----
1 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 0f27f4c..ebb9f24 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -1665,10 +1665,9 @@ check_started_ok(struct fst_card_info *card)
* existing firmware etc so we just report it for the moment.
*/
if (FST_RDL(card, numberOfPorts) != card->nports) {
- pr_warning("Port count mismatch on card %d. "
- "Firmware thinks %d we say %d\n",
- card->card_no,
- FST_RDL(card, numberOfPorts), card->nports);
+ pr_warn("Port count mismatch on card %d. Firmware thinks %d we say %d\n",
+ card->card_no,
+ FST_RDL(card, numberOfPorts), card->nports);
}
}
--
1.7.6.rc1
Use pr_fmt, pr_<level> and netdev_<level> as appropriate.
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/wan/ixp4xx_hss.c | 28 +++++++++++++---------------
1 files changed, 13 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index f1e1643..aaaca9a 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -8,6 +8,8 @@
* as published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/bitops.h>
#include <linux/cdev.h>
#include <linux/dma-mapping.h>
@@ -358,9 +360,8 @@ static void hss_npe_send(struct port *port, struct msg *msg, const char* what)
{
u32 *val = (u32*)msg;
if (npe_send_message(port->npe, msg, what)) {
- printk(KERN_CRIT "HSS-%i: unable to send command [%08X:%08X]"
- " to %s\n", port->id, val[0], val[1],
- npe_name(port->npe));
+ pr_crit("HSS-%i: unable to send command [%08X:%08X] to %s\n",
+ port->id, val[0], val[1], npe_name(port->npe));
BUG();
}
}
@@ -447,8 +448,7 @@ static void hss_config(struct port *port)
if (npe_recv_message(port->npe, &msg, "HSS_LOAD_CONFIG") ||
/* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
msg.cmd != PORT_CONFIG_LOAD || msg.data32) {
- printk(KERN_CRIT "HSS-%i: HSS_LOAD_CONFIG failed\n",
- port->id);
+ pr_crit("HSS-%i: HSS_LOAD_CONFIG failed\n", port->id);
BUG();
}
@@ -477,8 +477,7 @@ static u32 hss_get_status(struct port *port)
msg.hss_port = port->id;
hss_npe_send(port, &msg, "PORT_ERROR_READ");
if (npe_recv_message(port->npe, &msg, "PORT_ERROR_READ")) {
- printk(KERN_CRIT "HSS-%i: unable to read HSS status\n",
- port->id);
+ pr_crit("HSS-%i: unable to read HSS status\n", port->id);
BUG();
}
@@ -736,9 +735,8 @@ static int hss_hdlc_poll(struct napi_struct *napi, int budget)
dev->stats.rx_errors++;
break;
default: /* FIXME - remove printk */
- printk(KERN_ERR "%s: hss_hdlc_poll: status 0x%02X"
- " errors %u\n", dev->name, desc->status,
- desc->error_count);
+ netdev_err(dev, "hss_hdlc_poll: status 0x%02X errors %u\n",
+ desc->status, desc->error_count);
dev->stats.rx_errors++;
}
@@ -1127,8 +1125,8 @@ static int hss_hdlc_close(struct net_device *dev)
buffs--;
if (buffs)
- printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
- " left in NPE\n", dev->name, buffs);
+ netdev_crit(dev, "unable to drain RX queue, %i buffer(s) left in NPE\n",
+ buffs);
buffs = TX_DESCS;
while (queue_get_desc(queue_ids[port->id].tx, port, 1) >= 0)
@@ -1143,8 +1141,8 @@ static int hss_hdlc_close(struct net_device *dev)
} while (++i < MAX_CLOSE_WAIT);
if (buffs)
- printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
- "left in NPE\n", dev->name, buffs);
+ netdev_crit(dev, "unable to drain TX queue, %i buffer(s) left in NPE\n",
+ buffs);
#if DEBUG_CLOSE
if (!buffs)
printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
@@ -1364,7 +1362,7 @@ static int __devinit hss_init_one(struct platform_device *pdev)
platform_set_drvdata(pdev, port);
- printk(KERN_INFO "%s: HSS-%i\n", dev->name, port->id);
+ netdev_info(dev, "HSS-%i\n", port->id);
return 0;
err_free_netdev:
--
1.7.6.rc1
Use pr_fmt, pr_<level> and netdev_<level> as appropriate.
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/wan/hostess_sv11.c | 11 +++---
drivers/net/wan/lapbether.c | 18 +++++-----
drivers/net/wan/pc300_drv.c | 4 ++-
drivers/net/wan/sbni.c | 67 +++++++++++++++++++---------------------
drivers/net/wan/sealevel.c | 11 +++---
drivers/net/wan/x25_asy.c | 47 ++++++++++++++--------------
drivers/net/wan/z85230.c | 34 ++++++++++----------
7 files changed, 96 insertions(+), 96 deletions(-)
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index e817583..3d80e42 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -20,6 +20,8 @@
* Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <[email protected]>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
@@ -192,8 +194,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
*/
if (!request_region(iobase, 8, "Comtrol SV11")) {
- printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n",
- iobase);
+ pr_warn("I/O 0x%X already in use\n", iobase);
return NULL;
}
@@ -221,7 +222,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
if (request_irq(irq, z8530_interrupt, IRQF_DISABLED,
"Hostess SV11", sv) < 0) {
- printk(KERN_WARNING "hostess: IRQ %d already in use.\n", irq);
+ pr_warn("IRQ %d already in use\n", irq);
goto err_irq;
}
@@ -255,7 +256,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
*/
if (z8530_init(sv)) {
- printk(KERN_ERR "Z8530 series device not found.\n");
+ pr_err("Z8530 series device not found\n");
enable_irq(irq);
goto free_dma;
}
@@ -282,7 +283,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
netdev->irq = irq;
if (register_hdlc_device(netdev)) {
- printk(KERN_ERR "hostess: unable to register HDLC device.\n");
+ pr_err("unable to register HDLC device\n");
free_netdev(netdev);
goto free_dma;
}
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index eec463f..a817081 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -20,6 +20,8 @@
* 2000-11-14 Henner Eisen dev_hold/put, NETDEV_GOING_DOWN support
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/socket.h>
@@ -165,13 +167,11 @@ static netdev_tx_t lapbeth_xmit(struct sk_buff *skb,
break;
case X25_IFACE_CONNECT:
if ((err = lapb_connect_request(dev)) != LAPB_OK)
- printk(KERN_ERR "lapbeth: lapb_connect_request "
- "error: %d\n", err);
+ pr_err("lapb_connect_request error: %d\n", err);
goto drop;
case X25_IFACE_DISCONNECT:
if ((err = lapb_disconnect_request(dev)) != LAPB_OK)
- printk(KERN_ERR "lapbeth: lapb_disconnect_request "
- "err: %d\n", err);
+ pr_err("lapb_disconnect_request err: %d\n", err);
/* Fall thru */
default:
goto drop;
@@ -180,7 +180,7 @@ static netdev_tx_t lapbeth_xmit(struct sk_buff *skb,
skb_pull(skb, 1);
if ((err = lapb_data_request(dev, skb)) != LAPB_OK) {
- printk(KERN_ERR "lapbeth: lapb_data_request error - %d\n", err);
+ pr_err("lapb_data_request error - %d\n", err);
goto drop;
}
out:
@@ -220,7 +220,7 @@ static void lapbeth_connected(struct net_device *dev, int reason)
struct sk_buff *skb = dev_alloc_skb(1);
if (!skb) {
- printk(KERN_ERR "lapbeth: out of memory\n");
+ pr_err("out of memory\n");
return;
}
@@ -237,7 +237,7 @@ static void lapbeth_disconnected(struct net_device *dev, int reason)
struct sk_buff *skb = dev_alloc_skb(1);
if (!skb) {
- printk(KERN_ERR "lapbeth: out of memory\n");
+ pr_err("out of memory\n");
return;
}
@@ -277,7 +277,7 @@ static int lapbeth_open(struct net_device *dev)
int err;
if ((err = lapb_register(dev, &lapbeth_callbacks)) != LAPB_OK) {
- printk(KERN_ERR "lapbeth: lapb_register error - %d\n", err);
+ pr_err("lapb_register error: %d\n", err);
return -ENODEV;
}
@@ -292,7 +292,7 @@ static int lapbeth_close(struct net_device *dev)
netif_stop_queue(dev);
if ((err = lapb_unregister(dev)) != LAPB_OK)
- printk(KERN_ERR "lapbeth: lapb_unregister error - %d\n", err);
+ pr_err("lapb_unregister error: %d\n", err);
return 0;
}
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index 9617d3d..1eeedd6 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -212,6 +212,8 @@ static const char rcsid[] =
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
@@ -3242,7 +3244,7 @@ static inline void show_version(void)
rcsdate++;
tmp = strrchr(rcsdate, ' ');
*tmp = '\0';
- printk(KERN_INFO "Cyclades-PC300 driver %s %s\n", rcsvers, rcsdate);
+ pr_info("Cyclades-PC300 driver %s %s\n", rcsvers, rcsdate);
} /* show_version */
static const struct net_device_ops cpc_netdev_ops = {
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index cff13a9..40e95fa 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -37,6 +37,8 @@
* Known problem: this driver wasn't tested on multiprocessor machine.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
@@ -200,8 +202,8 @@ sbni_isa_probe( struct net_device *dev )
return 0;
else {
- printk( KERN_ERR "sbni: base address 0x%lx is busy, or adapter "
- "is malfunctional!\n", dev->base_addr );
+ pr_err("base address 0x%lx is busy, or adapter is malfunctional!\n",
+ dev->base_addr);
return -ENODEV;
}
}
@@ -226,7 +228,6 @@ static void __init sbni_devsetup(struct net_device *dev)
int __init sbni_probe(int unit)
{
struct net_device *dev;
- static unsigned version_printed __initdata = 0;
int err;
dev = alloc_netdev(sizeof(struct net_local), "sbni", sbni_devsetup);
@@ -250,8 +251,7 @@ int __init sbni_probe(int unit)
free_netdev(dev);
return err;
}
- if( version_printed++ == 0 )
- printk( KERN_INFO "%s", version );
+ pr_info_once("%s", version);
return 0;
}
@@ -326,9 +326,9 @@ sbni_pci_probe( struct net_device *dev )
}
if (pci_irq_line <= 0 || pci_irq_line >= nr_irqs)
- printk( KERN_WARNING
- " WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n"
- " You should use the PCI BIOS setup to assign a valid IRQ line.\n",
+ pr_warn(
+"WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n"
+"You should use the PCI BIOS setup to assign a valid IRQ line.\n",
pci_irq_line );
/* avoiding re-enable dual adapters */
@@ -372,8 +372,7 @@ sbni_probe1( struct net_device *dev, unsigned long ioaddr, int irq )
outb( 0, ioaddr + CSR0 );
if( !irq ) {
- printk( KERN_ERR "%s: can't detect device irq!\n",
- dev->name );
+ pr_err("%s: can't detect device irq!\n", dev->name);
release_region( ioaddr, SBNI_IO_EXTENT );
return NULL;
}
@@ -386,7 +385,7 @@ sbni_probe1( struct net_device *dev, unsigned long ioaddr, int irq )
/* Fill in sbni-specific dev fields. */
nl = netdev_priv(dev);
if( !nl ) {
- printk( KERN_ERR "%s: unable to get memory!\n", dev->name );
+ pr_err("%s: unable to get memory!\n", dev->name);
release_region( ioaddr, SBNI_IO_EXTENT );
return NULL;
}
@@ -415,21 +414,21 @@ sbni_probe1( struct net_device *dev, unsigned long ioaddr, int irq )
if( inb( ioaddr + CSR0 ) & 0x01 )
nl->state |= FL_SLOW_MODE;
- printk( KERN_NOTICE "%s: ioaddr %#lx, irq %d, "
- "MAC: 00:ff:01:%02x:%02x:%02x\n",
- dev->name, dev->base_addr, dev->irq,
- ((u8 *) dev->dev_addr) [3],
- ((u8 *) dev->dev_addr) [4],
- ((u8 *) dev->dev_addr) [5] );
+ pr_notice("%s: ioaddr %#lx, irq %d, MAC: 00:ff:01:%02x:%02x:%02x\n",
+ dev->name, dev->base_addr, dev->irq,
+ ((u8 *)dev->dev_addr)[3],
+ ((u8 *)dev->dev_addr)[4],
+ ((u8 *)dev->dev_addr)[5]);
- printk( KERN_NOTICE "%s: speed %d, receive level ", dev->name,
- ( (nl->state & FL_SLOW_MODE) ? 500000 : 2000000)
- / (1 << nl->csr1.rate) );
+ pr_notice("%s: speed %d",
+ dev->name,
+ ((nl->state & FL_SLOW_MODE) ? 500000 : 2000000)
+ / (1 << nl->csr1.rate));
if( nl->delta_rxl == 0 )
- printk( "0x%x (fixed)\n", nl->cur_rxl_index );
+ pr_cont(", receive level 0x%x (fixed)\n", nl->cur_rxl_index);
else
- printk( "(auto)\n");
+ pr_cont(", receive level (auto)\n");
#ifdef CONFIG_SBNI_MULTILINE
nl->master = dev;
@@ -568,7 +567,7 @@ handle_channel( struct net_device *dev )
*/
csr0 = inb( ioaddr + CSR0 );
if( !(csr0 & TR_RDY) || (csr0 & RC_RDY) )
- printk( KERN_ERR "%s: internal error!\n", dev->name );
+ netdev_err(dev, "internal error!\n");
/* if state & FL_NEED_RESEND != 0 then tx_frameno != 0 */
if( req_ans || nl->tx_frameno != 0 )
@@ -851,7 +850,7 @@ prepare_to_send( struct sk_buff *skb, struct net_device *dev )
/* nl->tx_buf_p == NULL here! */
if( nl->tx_buf_p )
- printk( KERN_ERR "%s: memory leak!\n", dev->name );
+ netdev_err(dev, "memory leak!\n");
nl->outpos = 0;
nl->state &= ~(FL_WAIT_ACK | FL_NEED_RESEND);
@@ -1179,16 +1178,15 @@ sbni_open( struct net_device *dev )
((struct net_local *) (netdev_priv(*p)))
->second = dev;
- printk( KERN_NOTICE "%s: using shared irq "
- "with %s\n", dev->name, (*p)->name );
+ netdev_notice(dev, "using shared irq with %s\n",
+ (*p)->name);
nl->state |= FL_SECONDARY;
goto handler_attached;
}
}
if( request_irq(dev->irq, sbni_interrupt, IRQF_SHARED, dev->name, dev) ) {
- printk( KERN_ERR "%s: unable to get IRQ %d.\n",
- dev->name, dev->irq );
+ netdev_err(dev, "unable to get IRQ %d\n", dev->irq);
return -EAGAIN;
}
@@ -1220,8 +1218,8 @@ sbni_close( struct net_device *dev )
struct net_local *nl = netdev_priv(dev);
if( nl->second && nl->second->flags & IFF_UP ) {
- printk( KERN_NOTICE "Secondary channel (%s) is active!\n",
- nl->second->name );
+ netdev_notice(dev, "Secondary channel (%s) is active!\n",
+ nl->second->name);
return -EBUSY;
}
@@ -1363,8 +1361,8 @@ sbni_ioctl( struct net_device *dev, struct ifreq *ifr, int cmd )
return -EFAULT;
slave_dev = dev_get_by_name(&init_net, slave_name );
if( !slave_dev || !(slave_dev->flags & IFF_UP) ) {
- printk( KERN_ERR "%s: trying to enslave non-active "
- "device %s\n", dev->name, slave_name );
+ netdev_err(dev, "trying to enslave non-active device %s\n",
+ slave_name);
return -EPERM;
}
@@ -1417,8 +1415,7 @@ enslave( struct net_device *dev, struct net_device *slave_dev )
spin_unlock( &snl->lock );
spin_unlock( &nl->lock );
- printk( KERN_NOTICE "%s: slave device (%s) attached.\n",
- dev->name, slave_dev->name );
+ netdev_notice(dev, "slave device (%s) attached\n", slave_dev->name);
return 0;
}
@@ -1547,7 +1544,7 @@ sbni_setup( char *p )
break;
}
bad_param:
- printk( KERN_ERR "Error in sbni kernel parameter!\n" );
+ pr_err("Error in sbni kernel parameter!\n");
return 0;
}
diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c
index e91457d..0b4fd05 100644
--- a/drivers/net/wan/sealevel.c
+++ b/drivers/net/wan/sealevel.c
@@ -12,6 +12,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
@@ -190,7 +192,7 @@ static int slvl_setup(struct slvl_device *sv, int iobase, int irq)
dev->irq = irq;
if (register_hdlc_device(dev)) {
- printk(KERN_ERR "sealevel: unable to register HDLC device\n");
+ pr_err("unable to register HDLC device\n");
free_netdev(dev);
return -1;
}
@@ -215,8 +217,7 @@ static __init struct slvl_board *slvl_init(int iobase, int irq,
*/
if (!request_region(iobase, 8, "Sealevel 4021")) {
- printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n",
- iobase);
+ pr_warn("I/O 0x%X already in use\n", iobase);
return NULL;
}
@@ -267,7 +268,7 @@ static __init struct slvl_board *slvl_init(int iobase, int irq,
if (request_irq(irq, z8530_interrupt, IRQF_DISABLED,
"SeaLevel", dev) < 0) {
- printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq);
+ pr_warn("IRQ %d already in use\n", irq);
goto err_request_irq;
}
@@ -292,7 +293,7 @@ static __init struct slvl_board *slvl_init(int iobase, int irq,
*/
if (z8530_init(dev) != 0) {
- printk(KERN_ERR "Z8530 series device not found.\n");
+ pr_err("Z8530 series device not found\n");
enable_irq(irq);
goto free_hw;
}
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index 24297b2..46ceb3a 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -14,6 +14,8 @@
* 2000-10-29 Henner Eisen lapb_data_indication() return status.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <asm/system.h>
@@ -96,7 +98,7 @@ static struct x25_asy *x25_asy_alloc(void)
x25_asy_devs[i] = dev;
return sl;
} else {
- printk(KERN_WARNING "x25_asy_alloc() - register_netdev() failure.\n");
+ pr_warn("%s(): register_netdev() failure\n", __func__);
free_netdev(dev);
}
}
@@ -114,8 +116,7 @@ static void x25_asy_free(struct x25_asy *sl)
sl->xbuff = NULL;
if (!test_and_clear_bit(SLF_INUSE, &sl->flags))
- printk(KERN_ERR "%s: x25_asy_free for already free unit.\n",
- sl->dev->name);
+ netdev_err(sl->dev, "x25_asy_free for already free unit\n");
}
static int x25_asy_change_mtu(struct net_device *dev, int newmtu)
@@ -128,8 +129,7 @@ static int x25_asy_change_mtu(struct net_device *dev, int newmtu)
rbuff = kmalloc(len + 4, GFP_ATOMIC);
if (xbuff == NULL || rbuff == NULL) {
- printk(KERN_WARNING "%s: unable to grow X.25 buffers, MTU change cancelled.\n",
- dev->name);
+ netdev_warn(dev, "unable to grow X.25 buffers, MTU change cancelled\n");
kfree(xbuff);
kfree(rbuff);
return -ENOMEM;
@@ -198,8 +198,7 @@ static void x25_asy_bump(struct x25_asy *sl)
skb = dev_alloc_skb(count+1);
if (skb == NULL) {
- printk(KERN_WARNING "%s: memory squeeze, dropping packet.\n",
- sl->dev->name);
+ netdev_warn(sl->dev, "memory squeeze, dropping packet\n");
dev->stats.rx_dropped++;
return;
}
@@ -287,9 +286,9 @@ static void x25_asy_timeout(struct net_device *dev)
/* May be we must check transmitter timeout here ?
* 14 Oct 1994 Dmitry Gorodchanin.
*/
- printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
- (tty_chars_in_buffer(sl->tty) || sl->xleft) ?
- "bad line quality" : "driver error");
+ netdev_warn(dev, "transmit timed out, %s?\n",
+ (tty_chars_in_buffer(sl->tty) || sl->xleft) ?
+ "bad line quality" : "driver error");
sl->xleft = 0;
clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
x25_asy_unlock(sl);
@@ -306,8 +305,7 @@ static netdev_tx_t x25_asy_xmit(struct sk_buff *skb,
int err;
if (!netif_running(sl->dev)) {
- printk(KERN_ERR "%s: xmit call when iface is down\n",
- dev->name);
+ netdev_err(dev, "xmit call when iface is down\n");
kfree_skb(skb);
return NETDEV_TX_OK;
}
@@ -318,13 +316,15 @@ static netdev_tx_t x25_asy_xmit(struct sk_buff *skb,
case X25_IFACE_CONNECT: /* Connection request .. do nothing */
err = lapb_connect_request(dev);
if (err != LAPB_OK)
- printk(KERN_ERR "x25_asy: lapb_connect_request error - %d\n", err);
+ netdev_err(dev, "lapb_connect_request error: %d\n",
+ err);
kfree_skb(skb);
return NETDEV_TX_OK;
case X25_IFACE_DISCONNECT: /* do nothing - hang up ?? */
err = lapb_disconnect_request(dev);
if (err != LAPB_OK)
- printk(KERN_ERR "x25_asy: lapb_disconnect_request error - %d\n", err);
+ netdev_err(dev, "lapb_disconnect_request error: %d\n",
+ err);
default:
kfree_skb(skb);
return NETDEV_TX_OK;
@@ -343,7 +343,7 @@ static netdev_tx_t x25_asy_xmit(struct sk_buff *skb,
err = lapb_data_request(dev, skb);
if (err != LAPB_OK) {
- printk(KERN_ERR "x25_asy: lapb_data_request error - %d\n", err);
+ netdev_err(dev, "lapb_data_request error: %d\n", err);
kfree_skb(skb);
return NETDEV_TX_OK;
}
@@ -378,7 +378,7 @@ static void x25_asy_data_transmit(struct net_device *dev, struct sk_buff *skb)
spin_lock(&sl->lock);
if (netif_queue_stopped(sl->dev) || sl->tty == NULL) {
spin_unlock(&sl->lock);
- printk(KERN_ERR "x25_asy: tbusy drop\n");
+ netdev_err(dev, "tbusy drop\n");
kfree_skb(skb);
return;
}
@@ -404,7 +404,7 @@ static void x25_asy_connected(struct net_device *dev, int reason)
skb = dev_alloc_skb(1);
if (skb == NULL) {
- printk(KERN_ERR "x25_asy: out of memory\n");
+ netdev_err(dev, "out of memory\n");
return;
}
@@ -423,7 +423,7 @@ static void x25_asy_disconnected(struct net_device *dev, int reason)
skb = dev_alloc_skb(1);
if (skb == NULL) {
- printk(KERN_ERR "x25_asy: out of memory\n");
+ netdev_err(dev, "out of memory\n");
return;
}
@@ -603,8 +603,8 @@ static void x25_asy_close_tty(struct tty_struct *tty)
err = lapb_unregister(sl->dev);
if (err != LAPB_OK)
- printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n",
- err);
+ pr_err("x25_asy_close: lapb_unregister error: %d\n",
+ err);
tty->disc_data = NULL;
sl->tty = NULL;
@@ -782,14 +782,13 @@ static int __init init_x25_asy(void)
if (x25_asy_maxdev < 4)
x25_asy_maxdev = 4; /* Sanity */
- printk(KERN_INFO "X.25 async: version 0.00 ALPHA "
- "(dynamic channels, max=%d).\n", x25_asy_maxdev);
+ pr_info("X.25 async: version 0.00 ALPHA (dynamic channels, max=%d)\n",
+ x25_asy_maxdev);
x25_asy_devs = kcalloc(x25_asy_maxdev, sizeof(struct net_device *),
GFP_KERNEL);
if (!x25_asy_devs) {
- printk(KERN_WARNING "X25 async: Can't allocate x25_asy_ctrls[] "
- "array! Uaargh! (-> No X.25 available)\n");
+ pr_warn("Can't allocate x25_asy_ctrls[] array! Uaargh! (-> No X.25 available)\n");
return -ENOMEM;
}
diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
index 0806232..0e57690 100644
--- a/drivers/net/wan/z85230.c
+++ b/drivers/net/wan/z85230.c
@@ -36,6 +36,8 @@
* Synchronous mode without DMA is unlikely to pass about 2400 baud.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
@@ -365,7 +367,7 @@ static void z8530_rx(struct z8530_channel *c)
c->count=0;
if(stat&Rx_OVR)
{
- printk(KERN_WARNING "%s: overrun\n", c->dev->name);
+ pr_warn("%s: overrun\n", c->dev->name);
c->rx_overrun++;
}
if(stat&CRC_ERR)
@@ -464,12 +466,12 @@ static void z8530_status(struct z8530_channel *chan)
if (altered & chan->dcdcheck)
{
if (status & chan->dcdcheck) {
- printk(KERN_INFO "%s: DCD raised\n", chan->dev->name);
+ pr_info("%s: DCD raised\n", chan->dev->name);
write_zsreg(chan, R3, chan->regs[3] | RxENABLE);
if (chan->netdevice)
netif_carrier_on(chan->netdevice);
} else {
- printk(KERN_INFO "%s: DCD lost\n", chan->dev->name);
+ pr_info("%s: DCD lost\n", chan->dev->name);
write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE);
z8530_flush_fifo(chan);
if (chan->netdevice)
@@ -538,12 +540,12 @@ static void z8530_dma_tx(struct z8530_channel *chan)
{
if(!chan->dma_tx)
{
- printk(KERN_WARNING "Hey who turned the DMA off?\n");
+ pr_warn("Hey who turned the DMA off?\n");
z8530_tx(chan);
return;
}
/* This shouldn't occur in DMA mode */
- printk(KERN_ERR "DMA tx - bogus event!\n");
+ pr_err("DMA tx - bogus event!\n");
z8530_tx(chan);
}
@@ -585,12 +587,12 @@ static void z8530_dma_status(struct z8530_channel *chan)
if (altered & chan->dcdcheck)
{
if (status & chan->dcdcheck) {
- printk(KERN_INFO "%s: DCD raised\n", chan->dev->name);
+ pr_info("%s: DCD raised\n", chan->dev->name);
write_zsreg(chan, R3, chan->regs[3] | RxENABLE);
if (chan->netdevice)
netif_carrier_on(chan->netdevice);
} else {
- printk(KERN_INFO "%s:DCD lost\n", chan->dev->name);
+ pr_info("%s: DCD lost\n", chan->dev->name);
write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE);
z8530_flush_fifo(chan);
if (chan->netdevice)
@@ -712,7 +714,7 @@ irqreturn_t z8530_interrupt(int irq, void *dev_id)
if(locker)
{
- printk(KERN_ERR "IRQ re-enter\n");
+ pr_err("IRQ re-enter\n");
return IRQ_NONE;
}
locker=1;
@@ -758,7 +760,8 @@ irqreturn_t z8530_interrupt(int irq, void *dev_id)
}
spin_unlock(&dev->lock);
if(work==5000)
- printk(KERN_ERR "%s: interrupt jammed - abort(0x%X)!\n", dev->name, intr);
+ pr_err("%s: interrupt jammed - abort(0x%X)!\n",
+ dev->name, intr);
/* Ok all done */
locker=0;
return IRQ_HANDLED;
@@ -1225,7 +1228,7 @@ static const char *z8530_type_name[]={
void z8530_describe(struct z8530_dev *dev, char *mapping, unsigned long io)
{
- printk(KERN_INFO "%s: %s found at %s 0x%lX, IRQ %d.\n",
+ pr_info("%s: %s found at %s 0x%lX, IRQ %d\n",
dev->name,
z8530_type_name[dev->type],
mapping,
@@ -1621,8 +1624,7 @@ static void z8530_rx_done(struct z8530_channel *c)
else
/* Can't occur as we dont reenable the DMA irq until
after the flip is done */
- printk(KERN_WARNING "%s: DMA flip overrun!\n",
- c->netdevice->name);
+ netdev_warn(c->netdevice, "DMA flip overrun!\n");
release_dma_lock(flags);
@@ -1637,8 +1639,7 @@ static void z8530_rx_done(struct z8530_channel *c)
skb = dev_alloc_skb(ct);
if (skb == NULL) {
c->netdevice->stats.rx_dropped++;
- printk(KERN_WARNING "%s: Memory squeeze.\n",
- c->netdevice->name);
+ netdev_warn(c->netdevice, "Memory squeeze\n");
} else {
skb_put(skb, ct);
skb_copy_to_linear_data(skb, rxb, ct);
@@ -1678,8 +1679,7 @@ static void z8530_rx_done(struct z8530_channel *c)
c->skb2 = dev_alloc_skb(c->mtu);
if (c->skb2 == NULL)
- printk(KERN_WARNING "%s: memory squeeze.\n",
- c->netdevice->name);
+ netdev_warn(c->netdevice, "memory squeeze\n");
else
skb_put(c->skb2, c->mtu);
c->netdevice->stats.rx_packets++;
@@ -1693,7 +1693,7 @@ static void z8530_rx_done(struct z8530_channel *c)
c->rx_function(c, skb);
} else {
c->netdevice->stats.rx_dropped++;
- printk(KERN_ERR "%s: Lost a frame\n", c->netdevice->name);
+ netdev_err(c->netdevice, "Lost a frame\n");
}
}
--
1.7.6.rc1
Hello,
Joe Perches wrote:
: Use pr_fmt, pr_<level> and netdev_<level> as appropriate.
:
: Signed-off-by: Joe Perches <[email protected]>
I am not sure whether the formatting changes
in the conditional expressions (in debug_status_out|in) are worth it,
but whatever.
Acked-By: Jan "Yenya" Kasprzak <[email protected]>
Thanks!
-Yenya
: ---
: drivers/net/wan/cosa.c | 226 ++++++++++++++++++++++-------------------------
: 1 files changed, 106 insertions(+), 120 deletions(-)
:
: diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
: index 6fb6f8e..6aed238 100644
: --- a/drivers/net/wan/cosa.c
: +++ b/drivers/net/wan/cosa.c
: @@ -74,6 +74,8 @@
: * The Sync PPP/Cisco HDLC layer (syncppp.c) ported to Linux by Alan Cox
: */
:
: +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
: +
: #include <linux/module.h>
: #include <linux/kernel.h>
: #include <linux/sched.h>
: @@ -361,14 +363,13 @@ static int __init cosa_init(void)
:
: if (cosa_major > 0) {
: if (register_chrdev(cosa_major, "cosa", &cosa_fops)) {
: - printk(KERN_WARNING "cosa: unable to get major %d\n",
: - cosa_major);
: + pr_warn("unable to get major %d\n", cosa_major);
: err = -EIO;
: goto out;
: }
: } else {
: if (!(cosa_major=register_chrdev(0, "cosa", &cosa_fops))) {
: - printk(KERN_WARNING "cosa: unable to register chardev\n");
: + pr_warn("unable to register chardev\n");
: err = -EIO;
: goto out;
: }
: @@ -378,7 +379,7 @@ static int __init cosa_init(void)
: for (i=0; io[i] != 0 && i < MAX_CARDS; i++)
: cosa_probe(io[i], irq[i], dma[i]);
: if (!nr_cards) {
: - printk(KERN_WARNING "cosa: no devices found.\n");
: + pr_warn("no devices found\n");
: unregister_chrdev(cosa_major, "cosa");
: err = -ENODEV;
: goto out;
: @@ -447,26 +448,25 @@ static int cosa_probe(int base, int irq, int dma)
: /* Checking validity of parameters: */
: /* IRQ should be 2-7 or 10-15; negative IRQ means autoprobe */
: if ((irq >= 0 && irq < 2) || irq > 15 || (irq < 10 && irq > 7)) {
: - printk (KERN_INFO "cosa_probe: invalid IRQ %d\n", irq);
: + pr_info("invalid IRQ %d\n", irq);
: return -1;
: }
: /* I/O address should be between 0x100 and 0x3ff and should be
: * multiple of 8. */
: if (base < 0x100 || base > 0x3ff || base & 0x7) {
: - printk (KERN_INFO "cosa_probe: invalid I/O address 0x%x\n",
: - base);
: + pr_info("invalid I/O address 0x%x\n", base);
: return -1;
: }
: /* DMA should be 0,1 or 3-7 */
: if (dma < 0 || dma == 4 || dma > 7) {
: - printk (KERN_INFO "cosa_probe: invalid DMA %d\n", dma);
: + pr_info("invalid DMA %d\n", dma);
: return -1;
: }
: /* and finally, on 16-bit COSA DMA should be 4-7 and
: * I/O base should not be multiple of 0x10 */
: if (((base & 0x8) && dma < 4) || (!(base & 0x8) && dma > 3)) {
: - printk (KERN_INFO "cosa_probe: 8/16 bit base and DMA mismatch"
: - " (base=0x%x, dma=%d)\n", base, dma);
: + pr_info("8/16 bit base and DMA mismatch (base=0x%x, dma=%d)\n",
: + base, dma);
: return -1;
: }
:
: @@ -479,7 +479,7 @@ static int cosa_probe(int base, int irq, int dma)
: return -1;
:
: if (cosa_reset_and_read_id(cosa, cosa->id_string) < 0) {
: - printk(KERN_DEBUG "cosa: probe at 0x%x failed.\n", base);
: + printk(KERN_DEBUG "probe at 0x%x failed.\n", base);
: err = -1;
: goto err_out;
: }
: @@ -492,8 +492,7 @@ static int cosa_probe(int base, int irq, int dma)
: else {
: /* Print a warning only if we are not autoprobing */
: #ifndef COSA_ISA_AUTOPROBE
: - printk(KERN_INFO "cosa: valid signature not found at 0x%x.\n",
: - base);
: + pr_info("valid signature not found at 0x%x\n", base);
: #endif
: err = -1;
: goto err_out;
: @@ -501,14 +500,14 @@ static int cosa_probe(int base, int irq, int dma)
: /* Update the name of the region now we know the type of card */
: release_region(base, is_8bit(cosa)?2:4);
: if (!request_region(base, is_8bit(cosa)?2:4, cosa->type)) {
: - printk(KERN_DEBUG "cosa: changing name at 0x%x failed.\n", base);
: + printk(KERN_DEBUG "changing name at 0x%x failed.\n", base);
: return -1;
: }
:
: /* Now do IRQ autoprobe */
: if (irq < 0) {
: unsigned long irqs;
: -/* printk(KERN_INFO "IRQ autoprobe\n"); */
: +/* pr_info("IRQ autoprobe\n"); */
: irqs = probe_irq_on();
: /*
: * Enable interrupt on tx buffer empty (it sure is)
: @@ -526,13 +525,13 @@ static int cosa_probe(int base, int irq, int dma)
: cosa_getdata8(cosa);
:
: if (irq < 0) {
: - printk (KERN_INFO "cosa IRQ autoprobe: multiple interrupts obtained (%d, board at 0x%x)\n",
: + pr_info("multiple interrupts obtained (%d, board at 0x%x)\n",
: irq, cosa->datareg);
: err = -1;
: goto err_out;
: }
: if (irq == 0) {
: - printk (KERN_INFO "cosa IRQ autoprobe: no interrupt obtained (board at 0x%x)\n",
: + pr_info("no interrupt obtained (board at 0x%x)\n",
: cosa->datareg);
: /* return -1; */
: }
: @@ -579,8 +578,7 @@ static int cosa_probe(int base, int irq, int dma)
:
: /* Register the network interface */
: if (!(chan->netdev = alloc_hdlcdev(chan))) {
: - printk(KERN_WARNING "%s: alloc_hdlcdev failed.\n",
: - chan->name);
: + pr_warn("%s: alloc_hdlcdev failed\n", chan->name);
: goto err_hdlcdev;
: }
: dev_to_hdlc(chan->netdev)->attach = cosa_net_attach;
: @@ -591,14 +589,14 @@ static int cosa_probe(int base, int irq, int dma)
: chan->netdev->irq = chan->cosa->irq;
: chan->netdev->dma = chan->cosa->dma;
: if (register_hdlc_device(chan->netdev)) {
: - printk(KERN_WARNING "%s: register_hdlc_device()"
: - " failed.\n", chan->netdev->name);
: + netdev_warn(chan->netdev,
: + "register_hdlc_device() failed\n");
: free_netdev(chan->netdev);
: goto err_hdlcdev;
: }
: }
:
: - printk (KERN_INFO "cosa%d: %s (%s at 0x%x irq %d dma %d), %d channels\n",
: + pr_info("cosa%d: %s (%s at 0x%x irq %d dma %d), %d channels\n",
: cosa->num, cosa->id_string, cosa->type,
: cosa->datareg, cosa->irq, cosa->dma, cosa->nchannels);
:
: @@ -618,8 +616,7 @@ err_out1:
: free_irq(cosa->irq, cosa);
: err_out:
: release_region(cosa->datareg,is_8bit(cosa)?2:4);
: - printk(KERN_NOTICE "cosa%d: allocating resources failed\n",
: - cosa->num);
: + pr_notice("cosa%d: allocating resources failed\n", cosa->num);
: return err;
: }
:
: @@ -641,14 +638,14 @@ static int cosa_net_open(struct net_device *dev)
: unsigned long flags;
:
: if (!(chan->cosa->firmware_status & COSA_FW_START)) {
: - printk(KERN_NOTICE "%s: start the firmware first (status %d)\n",
: - chan->cosa->name, chan->cosa->firmware_status);
: + pr_notice("%s: start the firmware first (status %d)\n",
: + chan->cosa->name, chan->cosa->firmware_status);
: return -EPERM;
: }
: spin_lock_irqsave(&chan->cosa->lock, flags);
: if (chan->usage != 0) {
: - printk(KERN_WARNING "%s: cosa_net_open called with usage count"
: - " %d\n", chan->name, chan->usage);
: + pr_warn("%s: cosa_net_open called with usage count %d\n",
: + chan->name, chan->usage);
: spin_unlock_irqrestore(&chan->cosa->lock, flags);
: return -EBUSY;
: }
: @@ -736,8 +733,7 @@ static char *cosa_net_setup_rx(struct channel_data *chan, int size)
: kfree_skb(chan->rx_skb);
: chan->rx_skb = dev_alloc_skb(size);
: if (chan->rx_skb == NULL) {
: - printk(KERN_NOTICE "%s: Memory squeeze, dropping packet\n",
: - chan->name);
: + pr_notice("%s: Memory squeeze, dropping packet\n", chan->name);
: chan->netdev->stats.rx_dropped++;
: return NULL;
: }
: @@ -748,8 +744,7 @@ static char *cosa_net_setup_rx(struct channel_data *chan, int size)
: static int cosa_net_rx_done(struct channel_data *chan)
: {
: if (!chan->rx_skb) {
: - printk(KERN_WARNING "%s: rx_done with empty skb!\n",
: - chan->name);
: + pr_warn("%s: rx_done with empty skb!\n", chan->name);
: chan->netdev->stats.rx_errors++;
: chan->netdev->stats.rx_frame_errors++;
: return 0;
: @@ -768,8 +763,7 @@ static int cosa_net_rx_done(struct channel_data *chan)
: static int cosa_net_tx_done(struct channel_data *chan, int size)
: {
: if (!chan->tx_skb) {
: - printk(KERN_WARNING "%s: tx_done with empty skb!\n",
: - chan->name);
: + pr_warn("%s: tx_done with empty skb!\n", chan->name);
: chan->netdev->stats.tx_errors++;
: chan->netdev->stats.tx_aborted_errors++;
: return 1;
: @@ -794,15 +788,15 @@ static ssize_t cosa_read(struct file *file,
: char *kbuf;
:
: if (!(cosa->firmware_status & COSA_FW_START)) {
: - printk(KERN_NOTICE "%s: start the firmware first (status %d)\n",
: - cosa->name, cosa->firmware_status);
: + pr_notice("%s: start the firmware first (status %d)\n",
: + cosa->name, cosa->firmware_status);
: return -EPERM;
: }
: if (mutex_lock_interruptible(&chan->rlock))
: return -ERESTARTSYS;
:
: if ((chan->rxdata = kmalloc(COSA_MTU, GFP_DMA|GFP_KERNEL)) == NULL) {
: - printk(KERN_INFO "%s: cosa_read() - OOM\n", cosa->name);
: + pr_info("%s: cosa_read() - OOM\n", cosa->name);
: mutex_unlock(&chan->rlock);
: return -ENOMEM;
: }
: @@ -869,8 +863,8 @@ static ssize_t cosa_write(struct file *file,
: char *kbuf;
:
: if (!(cosa->firmware_status & COSA_FW_START)) {
: - printk(KERN_NOTICE "%s: start the firmware first (status %d)\n",
: - cosa->name, cosa->firmware_status);
: + pr_notice("%s: start the firmware first (status %d)\n",
: + cosa->name, cosa->firmware_status);
: return -EPERM;
: }
: if (down_interruptible(&chan->wsem))
: @@ -881,8 +875,8 @@ static ssize_t cosa_write(struct file *file,
:
: /* Allocate the buffer */
: if ((kbuf = kmalloc(count, GFP_KERNEL|GFP_DMA)) == NULL) {
: - printk(KERN_NOTICE "%s: cosa_write() OOM - dropping packet\n",
: - cosa->name);
: + pr_notice("%s: cosa_write() OOM - dropping packet\n",
: + cosa->name);
: up(&chan->wsem);
: return -ENOMEM;
: }
: @@ -932,7 +926,7 @@ static int chrdev_tx_done(struct channel_data *chan, int size)
:
: static unsigned int cosa_poll(struct file *file, poll_table *poll)
: {
: - printk(KERN_INFO "cosa_poll is here\n");
: + pr_info("cosa_poll is here\n");
: return 0;
: }
:
: @@ -1017,15 +1011,14 @@ static inline int cosa_reset(struct cosa_data *cosa)
: {
: char idstring[COSA_MAX_ID_STRING];
: if (cosa->usage > 1)
: - printk(KERN_INFO "cosa%d: WARNING: reset requested with cosa->usage > 1 (%d). Odd things may happen.\n",
: + pr_info("cosa%d: WARNING: reset requested with cosa->usage > 1 (%d). Odd things may happen.\n",
: cosa->num, cosa->usage);
: cosa->firmware_status &= ~(COSA_FW_RESET|COSA_FW_START);
: if (cosa_reset_and_read_id(cosa, idstring) < 0) {
: - printk(KERN_NOTICE "cosa%d: reset failed\n", cosa->num);
: + pr_notice("cosa%d: reset failed\n", cosa->num);
: return -EIO;
: }
: - printk(KERN_INFO "cosa%d: resetting device: %s\n", cosa->num,
: - idstring);
: + pr_info("cosa%d: resetting device: %s\n", cosa->num, idstring);
: cosa->firmware_status |= COSA_FW_RESET;
: return 0;
: }
: @@ -1037,11 +1030,11 @@ static inline int cosa_download(struct cosa_data *cosa, void __user *arg)
: int i;
:
: if (cosa->usage > 1)
: - printk(KERN_INFO "%s: WARNING: download of microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
: + pr_info("%s: WARNING: download of microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
: cosa->name, cosa->usage);
: if (!(cosa->firmware_status & COSA_FW_RESET)) {
: - printk(KERN_NOTICE "%s: reset the card first (status %d).\n",
: - cosa->name, cosa->firmware_status);
: + pr_notice("%s: reset the card first (status %d)\n",
: + cosa->name, cosa->firmware_status);
: return -EPERM;
: }
:
: @@ -1059,11 +1052,11 @@ static inline int cosa_download(struct cosa_data *cosa, void __user *arg)
:
: i = download(cosa, d.code, d.len, d.addr);
: if (i < 0) {
: - printk(KERN_NOTICE "cosa%d: microcode download failed: %d\n",
: - cosa->num, i);
: + pr_notice("cosa%d: microcode download failed: %d\n",
: + cosa->num, i);
: return -EIO;
: }
: - printk(KERN_INFO "cosa%d: downloading microcode - 0x%04x bytes at 0x%04x\n",
: + pr_info("cosa%d: downloading microcode - 0x%04x bytes at 0x%04x\n",
: cosa->num, d.len, d.addr);
: cosa->firmware_status |= COSA_FW_RESET|COSA_FW_DOWNLOAD;
: return 0;
: @@ -1076,12 +1069,11 @@ static inline int cosa_readmem(struct cosa_data *cosa, void __user *arg)
: int i;
:
: if (cosa->usage > 1)
: - printk(KERN_INFO "cosa%d: WARNING: readmem requested with "
: - "cosa->usage > 1 (%d). Odd things may happen.\n",
: + pr_info("cosa%d: WARNING: readmem requested with cosa->usage > 1 (%d). Odd things may happen.\n",
: cosa->num, cosa->usage);
: if (!(cosa->firmware_status & COSA_FW_RESET)) {
: - printk(KERN_NOTICE "%s: reset the card first (status %d).\n",
: - cosa->name, cosa->firmware_status);
: + pr_notice("%s: reset the card first (status %d)\n",
: + cosa->name, cosa->firmware_status);
: return -EPERM;
: }
:
: @@ -1093,11 +1085,10 @@ static inline int cosa_readmem(struct cosa_data *cosa, void __user *arg)
:
: i = readmem(cosa, d.code, d.len, d.addr);
: if (i < 0) {
: - printk(KERN_NOTICE "cosa%d: reading memory failed: %d\n",
: - cosa->num, i);
: + pr_notice("cosa%d: reading memory failed: %d\n", cosa->num, i);
: return -EIO;
: }
: - printk(KERN_INFO "cosa%d: reading card memory - 0x%04x bytes at 0x%04x\n",
: + pr_info("cosa%d: reading card memory - 0x%04x bytes at 0x%04x\n",
: cosa->num, d.len, d.addr);
: cosa->firmware_status |= COSA_FW_RESET;
: return 0;
: @@ -1109,23 +1100,22 @@ static inline int cosa_start(struct cosa_data *cosa, int address)
: int i;
:
: if (cosa->usage > 1)
: - printk(KERN_INFO "cosa%d: WARNING: start microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
: + pr_info("cosa%d: WARNING: start microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
: cosa->num, cosa->usage);
:
: if ((cosa->firmware_status & (COSA_FW_RESET|COSA_FW_DOWNLOAD))
: != (COSA_FW_RESET|COSA_FW_DOWNLOAD)) {
: - printk(KERN_NOTICE "%s: download the microcode and/or reset the card first (status %d).\n",
: - cosa->name, cosa->firmware_status);
: + pr_notice("%s: download the microcode and/or reset the card first (status %d)\n",
: + cosa->name, cosa->firmware_status);
: return -EPERM;
: }
: cosa->firmware_status &= ~COSA_FW_RESET;
: if ((i=startmicrocode(cosa, address)) < 0) {
: - printk(KERN_NOTICE "cosa%d: start microcode at 0x%04x failed: %d\n",
: - cosa->num, address, i);
: + pr_notice("cosa%d: start microcode at 0x%04x failed: %d\n",
: + cosa->num, address, i);
: return -EIO;
: }
: - printk(KERN_INFO "cosa%d: starting microcode at 0x%04x\n",
: - cosa->num, address);
: + pr_info("cosa%d: starting microcode at 0x%04x\n", cosa->num, address);
: cosa->startaddr = address;
: cosa->firmware_status |= COSA_FW_START;
: return 0;
: @@ -1255,11 +1245,11 @@ static int cosa_start_tx(struct channel_data *chan, char *buf, int len)
: #ifdef DEBUG_DATA
: int i;
:
: - printk(KERN_INFO "cosa%dc%d: starting tx(0x%x)", chan->cosa->num,
: - chan->num, len);
: + pr_info("cosa%dc%d: starting tx(0x%x)",
: + chan->cosa->num, chan->num, len);
: for (i=0; i<len; i++)
: - printk(" %02x", buf[i]&0xff);
: - printk("\n");
: + pr_cont(" %02x", buf[i]&0xff);
: + pr_cont("\n");
: #endif
: spin_lock_irqsave(&cosa->lock, flags);
: chan->txbuf = buf;
: @@ -1353,7 +1343,7 @@ static void cosa_kick(struct cosa_data *cosa)
: if (test_bit(TXBIT, &cosa->rxtx))
: s = "TX DMA";
:
: - printk(KERN_INFO "%s: %s timeout - restarting.\n", cosa->name, s);
: + pr_info("%s: %s timeout - restarting\n", cosa->name, s);
: spin_lock_irqsave(&cosa->lock, flags);
: cosa->rxtx = 0;
:
: @@ -1387,7 +1377,7 @@ static int cosa_dma_able(struct channel_data *chan, char *buf, int len)
: return 0;
: if ((b^ (b+len)) & 0x10000) {
: if (count++ < 5)
: - printk(KERN_INFO "%s: packet spanning a 64k boundary\n",
: + pr_info("%s: packet spanning a 64k boundary\n",
: chan->name);
: return 0;
: }
: @@ -1498,8 +1488,7 @@ static int readmem(struct cosa_data *cosa, char __user *microcode, int length, i
: char c;
: int i;
: if ((i=get_wait_data(cosa)) == -1) {
: - printk (KERN_INFO "cosa: 0x%04x bytes remaining\n",
: - length);
: + pr_info("0x%04x bytes remaining\n", length);
: return -11;
: }
: c=i;
: @@ -1582,14 +1571,15 @@ static int get_wait_data(struct cosa_data *cosa)
: short r;
: r = cosa_getdata8(cosa);
: #if 0
: - printk(KERN_INFO "cosa: get_wait_data returning after %d retries\n", 999-retries);
: + pr_info("get_wait_data returning after %d retries\n",
: + 999-retries);
: #endif
: return r;
: }
: /* sleep if not ready to read */
: schedule_timeout_interruptible(1);
: }
: - printk(KERN_INFO "cosa: timeout in get_wait_data (status 0x%x)\n",
: + pr_info("timeout in get_wait_data (status 0x%x)\n",
: cosa_getstatus(cosa));
: return -1;
: }
: @@ -1607,7 +1597,7 @@ static int put_wait_data(struct cosa_data *cosa, int data)
: if (cosa_getstatus(cosa) & SR_TX_RDY) {
: cosa_putdata8(cosa, data);
: #if 0
: - printk(KERN_INFO "Putdata: %d retries\n", 999-retries);
: + pr_info("Putdata: %d retries\n", 999-retries);
: #endif
: return 0;
: }
: @@ -1616,7 +1606,7 @@ static int put_wait_data(struct cosa_data *cosa, int data)
: schedule_timeout_interruptible(1);
: #endif
: }
: - printk(KERN_INFO "cosa%d: timeout in put_wait_data (status 0x%x)\n",
: + pr_info("cosa%d: timeout in put_wait_data (status 0x%x)\n",
: cosa->num, cosa_getstatus(cosa));
: return -1;
: }
: @@ -1636,13 +1626,13 @@ static int puthexnumber(struct cosa_data *cosa, int number)
: sprintf(temp, "%04X", number);
: for (i=0; i<4; i++) {
: if (put_wait_data(cosa, temp[i]) == -1) {
: - printk(KERN_NOTICE "cosa%d: puthexnumber failed to write byte %d\n",
: - cosa->num, i);
: + pr_notice("cosa%d: puthexnumber failed to write byte %d\n",
: + cosa->num, i);
: return -1-2*i;
: }
: if (get_wait_data(cosa) != temp[i]) {
: - printk(KERN_NOTICE "cosa%d: puthexhumber failed to read echo of byte %d\n",
: - cosa->num, i);
: + pr_notice("cosa%d: puthexhumber failed to read echo of byte %d\n",
: + cosa->num, i);
: return -2-2*i;
: }
: }
: @@ -1687,8 +1677,7 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
: {
: unsigned long flags, flags1;
: #ifdef DEBUG_IRQS
: - printk(KERN_INFO "cosa%d: SR_DOWN_REQUEST status=0x%04x\n",
: - cosa->num, status);
: + pr_info("cosa%d: SR_DOWN_REQUEST status=0x%04x\n", cosa->num, status);
: #endif
: spin_lock_irqsave(&cosa->lock, flags);
: set_bit(TXBIT, &cosa->rxtx);
: @@ -1696,8 +1685,7 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
: /* flow control, see the comment above */
: int i=0;
: if (!cosa->txbitmap) {
: - printk(KERN_WARNING "%s: No channel wants data "
: - "in TX IRQ. Expect DMA timeout.",
: + pr_warn("%s: No channel wants data in TX IRQ. Expect DMA timeout.\n",
: cosa->name);
: put_driver_status_nolock(cosa);
: clear_bit(TXBIT, &cosa->rxtx);
: @@ -1780,14 +1768,14 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
: if (cosa->busmaster) {
: unsigned long addr = virt_to_bus(cosa->txbuf);
: int count=0;
: - printk(KERN_INFO "busmaster IRQ\n");
: + pr_info("busmaster IRQ\n");
: while (!(cosa_getstatus(cosa)&SR_TX_RDY)) {
: count++;
: udelay(10);
: if (count > 1000) break;
: }
: - printk(KERN_INFO "status %x\n", cosa_getstatus(cosa));
: - printk(KERN_INFO "ready after %d loops\n", count);
: + pr_info("status %x\n", cosa_getstatus(cosa));
: + pr_info("ready after %d loops\n", count);
: cosa_putdata16(cosa, (addr >> 16)&0xffff);
:
: count = 0;
: @@ -1796,7 +1784,7 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
: if (count > 1000) break;
: udelay(10);
: }
: - printk(KERN_INFO "ready after %d loops\n", count);
: + pr_info("ready after %d loops\n", count);
: cosa_putdata16(cosa, addr &0xffff);
: flags1 = claim_dma_lock();
: set_dma_mode(cosa->dma, DMA_MODE_CASCADE);
: @@ -1824,7 +1812,7 @@ static inline void rx_interrupt(struct cosa_data *cosa, int status)
: {
: unsigned long flags;
: #ifdef DEBUG_IRQS
: - printk(KERN_INFO "cosa%d: SR_UP_REQUEST\n", cosa->num);
: + pr_info("cosa%d: SR_UP_REQUEST\n", cosa->num);
: #endif
:
: spin_lock_irqsave(&cosa->lock, flags);
: @@ -1847,7 +1835,7 @@ static inline void rx_interrupt(struct cosa_data *cosa, int status)
: debug_data_in(cosa, cosa->rxsize & 0xff);
: #endif
: #if 0
: - printk(KERN_INFO "cosa%d: receive rxsize = (0x%04x).\n",
: + pr_info("cosa%d: receive rxsize = (0x%04x)\n",
: cosa->num, cosa->rxsize);
: #endif
: }
: @@ -1857,12 +1845,12 @@ static inline void rx_interrupt(struct cosa_data *cosa, int status)
: debug_data_in(cosa, cosa->rxsize);
: #endif
: #if 0
: - printk(KERN_INFO "cosa%d: receive rxsize = (0x%04x).\n",
: + pr_info("cosa%d: receive rxsize = (0x%04x)\n",
: cosa->num, cosa->rxsize);
: #endif
: }
: if (((cosa->rxsize & 0xe000) >> 13) >= cosa->nchannels) {
: - printk(KERN_WARNING "%s: rx for unknown channel (0x%04x)\n",
: + pr_warn("%s: rx for unknown channel (0x%04x)\n",
: cosa->name, cosa->rxsize);
: spin_unlock_irqrestore(&cosa->lock, flags);
: goto reject;
: @@ -1877,7 +1865,7 @@ static inline void rx_interrupt(struct cosa_data *cosa, int status)
:
: if (!cosa->rxbuf) {
: reject: /* Reject the packet */
: - printk(KERN_INFO "cosa%d: rejecting packet on channel %d\n",
: + pr_info("cosa%d: rejecting packet on channel %d\n",
: cosa->num, cosa->rxchan->num);
: cosa->rxbuf = cosa->bouncebuf;
: }
: @@ -1924,11 +1912,11 @@ static inline void eot_interrupt(struct cosa_data *cosa, int status)
: #ifdef DEBUG_DATA
: {
: int i;
: - printk(KERN_INFO "cosa%dc%d: done rx(0x%x)", cosa->num,
: - cosa->rxchan->num, cosa->rxsize);
: + pr_info("cosa%dc%d: done rx(0x%x)",
: + cosa->num, cosa->rxchan->num, cosa->rxsize);
: for (i=0; i<cosa->rxsize; i++)
: - printk (" %02x", cosa->rxbuf[i]&0xff);
: - printk("\n");
: + pr_cont(" %02x", cosa->rxbuf[i]&0xff);
: + pr_cont("\n");
: }
: #endif
: /* Packet for unknown channel? */
: @@ -1940,8 +1928,7 @@ static inline void eot_interrupt(struct cosa_data *cosa, int status)
: if (cosa->rxchan->rx_done(cosa->rxchan))
: clear_bit(cosa->rxchan->num, &cosa->rxbitmap);
: } else {
: - printk(KERN_NOTICE "cosa%d: unexpected EOT interrupt\n",
: - cosa->num);
: + pr_notice("cosa%d: unexpected EOT interrupt\n", cosa->num);
: }
: /*
: * Clear the RXBIT, TXBIT and IRQBIT (the latest should be
: @@ -1963,8 +1950,7 @@ static irqreturn_t cosa_interrupt(int irq, void *cosa_)
: again:
: status = cosa_getstatus(cosa);
: #ifdef DEBUG_IRQS
: - printk(KERN_INFO "cosa%d: got IRQ, status 0x%02x\n", cosa->num,
: - status & 0xff);
: + pr_info("cosa%d: got IRQ, status 0x%02x\n", cosa->num, status & 0xff);
: #endif
: #ifdef DEBUG_IO
: debug_status_in(cosa, status);
: @@ -1985,15 +1971,15 @@ again:
: udelay(100);
: goto again;
: }
: - printk(KERN_INFO "cosa%d: unknown status 0x%02x in IRQ after %d retries\n",
: + pr_info("cosa%d: unknown status 0x%02x in IRQ after %d retries\n",
: cosa->num, status & 0xff, count);
: }
: #ifdef DEBUG_IRQS
: if (count)
: - printk(KERN_INFO "%s: %d-times got unknown status in IRQ\n",
: + pr_info("%s: %d-times got unknown status in IRQ\n",
: cosa->name, count);
: else
: - printk(KERN_INFO "%s: returning from IRQ\n", cosa->name);
: + pr_info("%s: returning from IRQ\n", cosa->name);
: #endif
: return IRQ_HANDLED;
: }
: @@ -2024,41 +2010,41 @@ static void debug_status_in(struct cosa_data *cosa, int status)
: s = "NO_REQ";
: break;
: }
: - printk(KERN_INFO "%s: IO: status -> 0x%02x (%s%s%s%s)\n",
: + pr_info("%s: IO: status -> 0x%02x (%s%s%s%s)\n",
: cosa->name,
: status,
: - status & SR_USR_RQ ? "USR_RQ|":"",
: - status & SR_TX_RDY ? "TX_RDY|":"",
: - status & SR_RX_RDY ? "RX_RDY|":"",
: + status & SR_USR_RQ ? "USR_RQ|" : "",
: + status & SR_TX_RDY ? "TX_RDY|" : "",
: + status & SR_RX_RDY ? "RX_RDY|" : "",
: s);
: }
:
: static void debug_status_out(struct cosa_data *cosa, int status)
: {
: - printk(KERN_INFO "%s: IO: status <- 0x%02x (%s%s%s%s%s%s)\n",
: + pr_info("%s: IO: status <- 0x%02x (%s%s%s%s%s%s)\n",
: cosa->name,
: status,
: - status & SR_RX_DMA_ENA ? "RXDMA|":"!rxdma|",
: - status & SR_TX_DMA_ENA ? "TXDMA|":"!txdma|",
: - status & SR_RST ? "RESET|":"",
: - status & SR_USR_INT_ENA ? "USRINT|":"!usrint|",
: - status & SR_TX_INT_ENA ? "TXINT|":"!txint|",
: - status & SR_RX_INT_ENA ? "RXINT":"!rxint");
: + status & SR_RX_DMA_ENA ? "RXDMA|" : "!rxdma|",
: + status & SR_TX_DMA_ENA ? "TXDMA|" : "!txdma|",
: + status & SR_RST ? "RESET|" : "",
: + status & SR_USR_INT_ENA ? "USRINT|" : "!usrint|",
: + status & SR_TX_INT_ENA ? "TXINT|" : "!txint|",
: + status & SR_RX_INT_ENA ? "RXINT" : "!rxint");
: }
:
: static void debug_data_in(struct cosa_data *cosa, int data)
: {
: - printk(KERN_INFO "%s: IO: data -> 0x%04x\n", cosa->name, data);
: + pr_info("%s: IO: data -> 0x%04x\n", cosa->name, data);
: }
:
: static void debug_data_out(struct cosa_data *cosa, int data)
: {
: - printk(KERN_INFO "%s: IO: data <- 0x%04x\n", cosa->name, data);
: + pr_info("%s: IO: data <- 0x%04x\n", cosa->name, data);
: }
:
: static void debug_data_cmd(struct cosa_data *cosa, int data)
: {
: - printk(KERN_INFO "%s: IO: data <- 0x%04x (%s|%s)\n",
: + pr_info("%s: IO: data <- 0x%04x (%s|%s)\n",
: cosa->name, data,
: data & SR_RDY_RCV ? "RX_RDY" : "!rx_rdy",
: data & SR_RDY_SND ? "TX_RDY" : "!tx_rdy");
: --
: 1.7.6.rc1
--
| Jan "Yenya" Kasprzak <kas at {fi.muni.cz - work | yenya.net - private}> |
| GPG: ID 1024/D3498839 Fingerprint 0D99A7FB206605D7 8B35FCDE05B18A5E |
| http://www.fi.muni.cz/~kas/ Journal: http://www.fi.muni.cz/~kas/blog/ |
Please don't top post and in particular don't attach entire digests to your
mail or we'll all soon be using bittorrent to read the list. --Alan Cox
From: Joe Perches <[email protected]>
Date: Sun, 26 Jun 2011 22:01:27 -0700
> Joe Perches (8):
> generic_hdlc: Update to current logging forms
> cosa: Update to current logging forms
> cyclom: Update to current logging forms
> frame relay dlci/frad: Update to current logging forms
> dscc4: Update to current logging forms
> farsync: Update to current logging forms
> ixp4xx_hss: Update to current logging forms
> wan: Update to current logging forms
All applied, thanks Joe.