2011-06-29 19:21:48

by Arkadiusz Miskiewicz

Subject: 3.0rc3-rc5: usb stops working after resume from suspend to ram

Hi,

Something broke between rc3 and rc5. Thinkpad t400, logitech usb mouse.
After resume from ram usb device no longer works. Somewhere around rc3 it was
working fine.

[ 445.585118] PM: early resume of devices complete after 53.028 msecs
[ 445.585769] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 445.585784] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 445.585823] usb usb4: root hub lost power or was reset
[ 445.585922] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 445.585976] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 445.585987] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 445.585994] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 445.586002] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 445.586038] usb usb7: root hub lost power or was reset
[ 445.586048] usb usb8: root hub lost power or was reset
[ 445.586102] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 445.586120] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 445.586131] e1000e 0000:00:19.0: PME# disabled
[ 445.586144] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 445.586172] pci 0000:00:1e.0: setting latency timer to 64
[ 445.586234] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 445.586244] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 445.586252] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 445.586260] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 445.586343] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 445.586356] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 445.586423] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 445.586611] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 445.588828] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 445.588876] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 445.588931] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 445.588968] usb usb3: root hub lost power or was reset
[ 445.589000] i915 0000:00:02.0: power state changed by ACPI to D0
[ 445.589043] ahci 0000:00:1f.2: setting latency timer to 64
[ 445.589214] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 445.589226] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 445.589239] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 445.589276] usb usb5: root hub lost power or was reset
[ 445.589299] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 445.589312] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 445.589327] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 445.589438] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 445.589450] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 445.589463] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 445.589497] usb usb6: root hub lost power or was reset
[ 445.589526] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 445.589539] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 445.589552] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 445.589672] i915 0000:00:02.0: power state changed by ACPI to D0
[ 445.589685] sd 0:0:0:0: [sda] Starting disk
[ 445.589692] i915 0000:00:02.0: setting latency timer to 64
[ 445.605236] legacy_resume(): pnp_bus_resume+0x0/0x67 returns -19
[ 445.605238] PM: Device 00:0a failed to resume: error -19
[ 445.648152] firewire_core: skipped bus generations, destroying all nodes
[ 445.696172] Extended CMOS year: 2000

Whole dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-rc5-00063-g0d72c6f (arekm@ixion-pld) (gcc version 4.6.1 20110627 (release) (PLD-Linux) ) #6 SMP PREEMPT Wed Jun 29 09:23:23 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0 root=/dev/mapper/lrootfs ro rootfsflags=delaylog resume=/dev/sda2 panic=60 reboot=acpi
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd4a1000 (usable)
[ 0.000000] BIOS-e820: 00000000bd4a1000 - 00000000bd4a7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd4a7000 - 00000000bd5b7000 (usable)
[ 0.000000] BIOS-e820: 00000000bd5b7000 - 00000000bd60f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd60f000 - 00000000bd6c6000 (usable)
[ 0.000000] BIOS-e820: 00000000bd6c6000 - 00000000bd6d1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd6d1000 - 00000000bd6d4000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd6d4000 - 00000000bd6d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd6d8000 - 00000000bd6dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd6dc000 - 00000000bd6df000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd6df000 - 00000000bd706000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd706000 - 00000000bd708000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd708000 - 00000000bd90f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd90f000 - 00000000bd99f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd99f000 - 00000000bd9ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd9ff000 - 00000000bda00000 (usable)
[ 0.000000] BIOS-e820: 00000000bdc00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 2764CTO/2764CTO, BIOS 7UET91WW (3.21 ) 12/06/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 13C000000 mask FFC000000 uncachable
[ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 080000000 mask FC0000000 write-back
[ 0.000000] 4 base 100000000 mask FC0000000 write-back
[ 0.000000] 5 base 0BDE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bde00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbda00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6480] f6480
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bda00000
[ 0.000000] 0000000000 - 00bda00000 page 2M
[ 0.000000] kernel direct mapping tables up to bda00000 @ bd6c2000-bd6c6000
[ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000
[ 0.000000] 0100000000 - 013c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 13c000000 @ 13bffa000-13c000000
[ 0.000000] RAMDISK: 37eb0000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f6440 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bd949b5a 0009C (v01 LENOVO TP-7U 00003210 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bd949d00 000F4 (v03 LENOVO TP-7U 00003210 LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bd94a10e 0FAE1 (v01 LENOVO TP-7U 00003210 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bd98e000 00040
[ 0.000000] ACPI: SSDT 00000000bd949eb4 0025A (v01 LENOVO TP-7U 00003210 MSFT 03000000)
[ 0.000000] ACPI: ECDT 00000000bd959bef 00052 (v01 LENOVO TP-7U 00003210 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bd959c41 00078 (v01 LENOVO TP-7U 00003210 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bd959cb9 0003C (v01 LENOVO TP-7U 00003210 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bd959cf5 00038 (v01 LENOVO TP-7U 00003210 LNVO 00000001)
[ 0.000000] ACPI: SLIC 00000000bd959dc2 00176 (v01 LENOVO TP-7U 00003210 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bd959f38 00028 (v01 LENOVO TP-7U 00003210 LTP 00000001)
[ 0.000000] ACPI: ASF! 00000000bd959f60 000A0 (v16 LENOVO TP-7U 00003210 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bd98d1fa 00568 (v01 LENOVO TP-7U 00003210 INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bd707000 00032 (v00 00000000 00000000)
[ 0.000000] ACPI: DMAR 00000000bd706000 00120 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: SSDT 00000000bd6d3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bd6d2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bd6d1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T400
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000013c000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000013c000000
[ 0.000000] NODE_DATA [000000013bffb000 - 000000013bffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880137600000-ffff88013adfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0013c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bd4a1
[ 0.000000] 0: 0x000bd4a7 -> 0x000bd5b7
[ 0.000000] 0: 0x000bd60f -> 0x000bd6c6
[ 0.000000] 0: 0x000bd9ff -> 0x000bda00
[ 0.000000] 0: 0x00100000 -> 0x0013c000
[ 0.000000] On node 0 totalpages: 1021431
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 757409 pages, LIFO batch:31
[ 0.000000] Normal zone: 3360 pages used for memmap
[ 0.000000] Normal zone: 242400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] 4 Processors exceeds NR_CPUS limit of 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bd4a1000 - 00000000bd4a7000
[ 0.000000] PM: Registered nosave memory: 00000000bd5b7000 - 00000000bd60f000
[ 0.000000] PM: Registered nosave memory: 00000000bd6c6000 - 00000000bd6d1000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d1000 - 00000000bd6d4000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d4000 - 00000000bd6d8000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d8000 - 00000000bd6dc000
[ 0.000000] PM: Registered nosave memory: 00000000bd6dc000 - 00000000bd6df000
[ 0.000000] PM: Registered nosave memory: 00000000bd6df000 - 00000000bd706000
[ 0.000000] PM: Registered nosave memory: 00000000bd706000 - 00000000bd708000
[ 0.000000] PM: Registered nosave memory: 00000000bd708000 - 00000000bd90f000
[ 0.000000] PM: Registered nosave memory: 00000000bd90f000 - 00000000bd99f000
[ 0.000000] PM: Registered nosave memory: 00000000bd99f000 - 00000000bd9ff000
[ 0.000000] PM: Registered nosave memory: 00000000bda00000 - 00000000bdc00000
[ 0.000000] PM: Registered nosave memory: 00000000bdc00000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
[ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88013bc00000 s69760 r8192 d24448 u1048576
[ 0.000000] pcpu-alloc: s69760 r8192 d24448 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003730
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0 root=/dev/mapper/lrootfs ro rootfsflags=delaylog resume=/dev/sda2 panic=60 reboot=acpi
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3950216k/5177344k available (4135k kernel code, 1091620k absent, 135508k reserved, 4577k data, 568k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:320
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2526.641 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.28 BogoMIPS (lpj=10106564)
[ 0.004119] pid_max: default: 32768 minimum: 301
[ 0.004203] Security Framework initialized
[ 0.004583] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006714] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008560] Mount-cache hash table entries: 256
[ 0.008783] Initializing cgroup subsys cpuacct
[ 0.008846] Initializing cgroup subsys memory
[ 0.008911] Initializing cgroup subsys devices
[ 0.008965] Initializing cgroup subsys freezer
[ 0.009021] Initializing cgroup subsys perf_event
[ 0.009103] Disabled fast string operations
[ 0.009161] CPU: Physical Processor ID: 0
[ 0.009215] CPU: Processor Core ID: 0
[ 0.009268] mce: CPU supports 6 MCE banks
[ 0.009328] CPU0: Thermal monitoring enabled (TM2)
[ 0.009385] using mwait in idle threads.
[ 0.009458] ACPI: Core revision 20110413
[ 0.024242] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063987] CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
[ 0.068003] APIC calibration not consistent with PM-Timer: 111ms instead of 100ms
[ 0.068003] APIC delta adjusted to PM-Timer: 1662494 (1861968)
[ 0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.068003] ... version: 2
[ 0.068003] ... bit width: 40
[ 0.068003] ... generic registers: 2
[ 0.068003] ... value mask: 000000ffffffffff
[ 0.068003] ... max period: 000000007fffffff
[ 0.068003] ... fixed-purpose events: 3
[ 0.068003] ... event mask: 0000000700000003
[ 0.092019] Booting Node 0, Processors #1 Ok.
[ 0.092117] smpboot cpu 1: start_ip = 99000
[ 0.008000] Disabled fast string operations
[ 0.184026] Brought up 2 CPUs
[ 0.184138] Total of 2 processors activated (10025.60 BogoMIPS).
[ 0.185759] devtmpfs: initialized
[ 0.185759] PM: Registering ACPI NVS region at bd6c6000 (45056 bytes)
[ 0.185759] PM: Registering ACPI NVS region at bd6d8000 (16384 bytes)
[ 0.185759] PM: Registering ACPI NVS region at bd6df000 (159744 bytes)
[ 0.185759] PM: Registering ACPI NVS region at bd90f000 (589824 bytes)
[ 0.185759] print_constraints: dummy:
[ 0.185759] NET: Registered protocol family 16
[ 0.185759] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.185759] ACPI: bus type pci registered
[ 0.185759] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.185759] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.197242] PCI: Using configuration type 1 for base access
[ 0.197328] bio: create slab <bio-0> at 0
[ 0.200033] ACPI: Added _OSI(Linux)
[ 0.201769] ACPI: EC: EC description table is found, configuring boot EC
[ 0.208066] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
[ 0.225350] ACPI: SSDT 00000000bd6d6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.225901] ACPI: Dynamic OEM Table Load:
[ 0.226038] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.226327] ACPI: SSDT 00000000bd6d4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.226907] ACPI: Dynamic OEM Table Load:
[ 0.227043] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.256261] ACPI: SSDT 00000000bd6d5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.256830] ACPI: Dynamic OEM Table Load:
[ 0.256967] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.268043] ACPI: SSDT 00000000bd6d5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.268594] ACPI: Dynamic OEM Table Load:
[ 0.268730] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.284165] ACPI: Interpreter enabled
[ 0.284222] ACPI: (supports S0 S3 S4 S5)
[ 0.284453] ACPI: Using IOAPIC for interrupt routing
[ 0.296091] ACPI: Power Resource [PUBS] (on)
[ 0.316159] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.316331] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.316387] HEST: Table not found.
[ 0.316443] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.316741] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.316833] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.316833] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.316833] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.316833] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.316833] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.316833] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.316833] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.316833] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.316833] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.316833] pci 0000:00:02.0: reg 10: [mem 0xf4400000-0xf47fffff 64bit]
[ 0.316833] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.316833] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.316833] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.316833] pci 0000:00:02.1: reg 10: [mem 0xf4200000-0xf42fffff 64bit]
[ 0.316833] pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780
[ 0.316833] pci 0000:00:03.0: reg 10: [mem 0xfc226800-0xfc22680f 64bit]
[ 0.316833] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.316833] pci 0000:00:03.0: PME# disabled
[ 0.316833] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200
[ 0.316833] pci 0000:00:19.0: reg 10: [mem 0xfc000000-0xfc01ffff]
[ 0.316833] pci 0000:00:19.0: reg 14: [mem 0xfc025000-0xfc025fff]
[ 0.316844] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
[ 0.316912] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.316916] pci 0000:00:19.0: PME# disabled
[ 0.316941] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.316996] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
[ 0.317054] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.317110] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
[ 0.317166] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.317221] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf]
[ 0.317289] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.317315] pci 0000:00:1a.7: reg 10: [mem 0xfc226c00-0xfc226fff]
[ 0.317402] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.317408] pci 0000:00:1a.7: PME# disabled
[ 0.317438] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.317458] pci 0000:00:1b.0: reg 10: [mem 0xfc020000-0xfc023fff 64bit]
[ 0.317533] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.317537] pci 0000:00:1b.0: PME# disabled
[ 0.317564] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.317642] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.317647] pci 0000:00:1c.0: PME# disabled
[ 0.317676] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.317754] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.317758] pci 0000:00:1c.1: PME# disabled
[ 0.317788] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.317866] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.317870] pci 0000:00:1c.3: PME# disabled
[ 0.317899] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 0.317977] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.317981] pci 0000:00:1c.4: PME# disabled
[ 0.318016] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.318071] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df]
[ 0.318128] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.320083] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff]
[ 0.320140] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.320195] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f]
[ 0.320264] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.320289] pci 0000:00:1d.7: reg 10: [mem 0xfc227000-0xfc2273ff]
[ 0.320376] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.320381] pci 0000:00:1d.7: PME# disabled
[ 0.320406] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.320486] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.320637] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.320663] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f]
[ 0.320675] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f]
[ 0.320685] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47]
[ 0.320696] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b]
[ 0.320707] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
[ 0.320718] pci 0000:00:1f.2: reg 24: [mem 0xfc226000-0xfc2267ff]
[ 0.320766] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.320770] pci 0000:00:1f.2: PME# disabled
[ 0.320794] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.320814] pci 0000:00:1f.3: reg 10: [mem 0xfc227400-0xfc2274ff 64bit]
[ 0.320843] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
[ 0.320932] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.320993] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.320998] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.321005] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.321140] pci 0000:03:00.0: [8086:423b] type 0 class 0x000280
[ 0.321184] pci 0000:03:00.0: reg 10: [mem 0xf4300000-0xf4301fff 64bit]
[ 0.321347] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.321358] pci 0000:03:00.0: PME# disabled
[ 0.321420] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.321481] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.321486] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff]
[ 0.321493] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.321549] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.321609] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.321614] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.321622] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[ 0.321677] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.321738] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.321742] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.321750] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
[ 0.321795] pci 0000:15:00.0: [1180:0476] type 2 class 0x000607
[ 0.321818] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 0.321890] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
[ 0.321977] pci 0000:15:00.0: reg 10: [mem 0xf4800000-0xf4800fff]
[ 0.322005] pci 0000:15:00.0: supports D1 D2
[ 0.322006] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.322012] pci 0000:15:00.0: PME# disabled
[ 0.322036] pci 0000:15:00.1: [1180:0832] type 0 class 0x000c00
[ 0.322062] pci 0000:15:00.1: reg 10: [mem 0xf4801000-0xf48017ff]
[ 0.322162] pci 0000:15:00.1: supports D1 D2
[ 0.322163] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.322169] pci 0000:15:00.1: PME# disabled
[ 0.322193] pci 0000:15:00.2: [1180:0822] type 0 class 0x000805
[ 0.322218] pci 0000:15:00.2: reg 10: [mem 0xf4801800-0xf48018ff]
[ 0.322318] pci 0000:15:00.2: supports D1 D2
[ 0.322320] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.322325] pci 0000:15:00.2: PME# disabled
[ 0.322352] pci 0000:15:00.4: [1180:0592] type 0 class 0x000880
[ 0.322377] pci 0000:15:00.4: reg 10: [mem 0xf4802000-0xf48020ff]
[ 0.322476] pci 0000:15:00.4: supports D1 D2
[ 0.322478] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.322483] pci 0000:15:00.4: PME# disabled
[ 0.322508] pci 0000:15:00.5: [1180:0852] type 0 class 0x000880
[ 0.322533] pci 0000:15:00.5: reg 10: [mem 0xf4802400-0xf48024ff]
[ 0.322632] pci 0000:15:00.5: supports D1 D2
[ 0.322634] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.322640] pci 0000:15:00.5: PME# disabled
[ 0.322710] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.322773] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
[ 0.322778] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff]
[ 0.322785] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.322787] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.322790] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.322792] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.322794] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.322797] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.322799] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.322802] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.322882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.322989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.323020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.323051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.323084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.323116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.323372] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.323780] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.328213] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.328602] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.329120] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.329641] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.330160] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.330678] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.331201] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.332493] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.333108] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.333108] vgaarb: loaded
[ 0.333108] vgaarb: bridge control possible 0000:00:02.0
[ 0.333108] PCI: Using ACPI for IRQ routing
[ 0.334350] PCI: pci_cache_line_size set to 64 bytes
[ 0.334467] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.334469] reserve RAM buffer: 00000000bd4a1000 - 00000000bfffffff
[ 0.334473] reserve RAM buffer: 00000000bd5b7000 - 00000000bfffffff
[ 0.334477] reserve RAM buffer: 00000000bd6c6000 - 00000000bfffffff
[ 0.334481] reserve RAM buffer: 00000000bda00000 - 00000000bfffffff
[ 0.336072] NetLabel: Initializing
[ 0.336111] NetLabel: domain hash size = 128
[ 0.336167] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.336232] NetLabel: unlabeled traffic allowed by default
[ 0.336295] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.336359] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.336617] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.340137] Switching to clocksource hpet
[ 0.341514] pnp: PnP ACPI init
[ 0.341527] ACPI: bus type pnp registered
[ 0.361805] Switched to NOHz mode on CPU #1
[ 0.361807] Switched to NOHz mode on CPU #0
[ 0.361853] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.361855] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.361857] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.361859] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.361860] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.361862] pnp 00:00: [mem 0x000d0000-0x000cffff disabled]
[ 0.361863] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.361865] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.361867] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.361868] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.361870] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.361874] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.361875] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.361877] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.361878] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.361880] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.361881] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.361964] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.362025] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.362086] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.362147] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.362207] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.362267] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.362328] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.362388] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.362449] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.362510] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.362570] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.362631] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.362692] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.362752] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.362814] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.362832] pnp 00:01: [bus 00-ff]
[ 0.362834] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.362836] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.362838] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.362840] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.362842] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.362844] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.362846] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.362848] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.362850] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.362852] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.362854] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.362856] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.362858] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.362860] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.362861] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.362863] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.362865] pnp 00:01: [mem 0xc0000000-0xfebfffff window]
[ 0.362867] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
[ 0.362939] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.382888] pnp 00:02: [io 0x0010-0x001f]
[ 0.382890] pnp 00:02: [io 0x0090-0x009f]
[ 0.382891] pnp 00:02: [io 0x0024-0x0025]
[ 0.382893] pnp 00:02: [io 0x0028-0x0029]
[ 0.382895] pnp 00:02: [io 0x002c-0x002d]
[ 0.382896] pnp 00:02: [io 0x0030-0x0031]
[ 0.382898] pnp 00:02: [io 0x0034-0x0035]
[ 0.382899] pnp 00:02: [io 0x0038-0x0039]
[ 0.382901] pnp 00:02: [io 0x003c-0x003d]
[ 0.382903] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.382904] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.382906] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.382907] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.382909] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.382910] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.382912] pnp 00:02: [io 0x0050-0x0053]
[ 0.382914] pnp 00:02: [io 0x0072-0x0077]
[ 0.382918] pnp 00:02: [io 0x002e-0x002f]
[ 0.382919] pnp 00:02: [io 0x1000-0x107f]
[ 0.382921] pnp 00:02: [io 0x1180-0x11ff]
[ 0.382922] pnp 00:02: [io 0x0800-0x080f]
[ 0.382924] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.382926] pnp 00:02: [io 0x1600-0x167f]
[ 0.382927] pnp 00:02: [io 0x1680-0x169f]
[ 0.382929] pnp 00:02: [mem 0xe0000000-0xefffffff]
[ 0.382931] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.382933] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 0.382934] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.382936] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.382938] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.383034] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.383094] system 00:02: [io 0x1180-0x11ff] has been reserved
[ 0.383153] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.383212] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.383271] system 00:02: [io 0x1600-0x167f] has been reserved
[ 0.383330] system 00:02: [io 0x1680-0x169f] has been reserved
[ 0.383390] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.383450] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.383511] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.383571] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.383631] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.383692] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.383752] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383788] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.383844] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.383854] pnp 00:04: [io 0x0000-0x000f]
[ 0.383855] pnp 00:04: [io 0x0080-0x008f]
[ 0.383857] pnp 00:04: [io 0x00c0-0x00df]
[ 0.383859] pnp 00:04: [dma 4]
[ 0.383909] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.383918] pnp 00:05: [io 0x0061]
[ 0.383969] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.383978] pnp 00:06: [io 0x00f0]
[ 0.383985] pnp 00:06: [irq 13]
[ 0.384046] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.384055] pnp 00:07: [io 0x0070-0x0071]
[ 0.384060] pnp 00:07: [irq 8]
[ 0.384114] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.384123] pnp 00:08: [io 0x0060]
[ 0.384125] pnp 00:08: [io 0x0064]
[ 0.384129] pnp 00:08: [irq 1]
[ 0.384180] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.384192] pnp 00:09: [irq 12]
[ 0.384244] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[ 0.404221] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.404291] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.404726] pnp: PnP ACPI: found 11 devices
[ 0.404782] ACPI: ACPI bus type pnp unregistered
[ 0.413189] PCI: max bus depth: 2 pci_try_num: 3
[ 0.413243] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.413316] pci 0000:00:1c.1: BAR 13: assigned [io 0x8000-0x8fff]
[ 0.413377] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0200000-0xc03fffff]
[ 0.413439] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.413512] pci 0000:00:1c.0: BAR 13: assigned [io 0x9000-0x9fff]
[ 0.413571] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.413630] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.413693] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.413756] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.413832] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.413891] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff]
[ 0.413954] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff]
[ 0.414016] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.414092] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.414151] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.414214] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.414276] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[ 0.414353] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.414412] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.414474] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.414537] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
[ 0.414614] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref]
[ 0.414687] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[ 0.414748] pci 0000:15:00.0: BAR 13: assigned [io 0x4000-0x40ff]
[ 0.414807] pci 0000:15:00.0: BAR 14: assigned [io 0x4400-0x44ff]
[ 0.414866] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.414924] pci 0000:15:00.0: bridge window [io 0x4000-0x40ff]
[ 0.414987] pci 0000:15:00.0: bridge window [io 0x4400-0x44ff]
[ 0.415049] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
[ 0.415123] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
[ 0.415186] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.415245] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
[ 0.415308] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff]
[ 0.417466] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.417550] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.417614] pci 0000:00:1c.0: setting latency timer to 64
[ 0.417622] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.417685] pci 0000:00:1c.1: setting latency timer to 64
[ 0.417692] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.417755] pci 0000:00:1c.3: setting latency timer to 64
[ 0.417762] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.417824] pci 0000:00:1c.4: setting latency timer to 64
[ 0.417832] pci 0000:00:1e.0: setting latency timer to 64
[ 0.417841] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.417905] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.417907] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.417909] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.417911] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.417913] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.417916] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.417918] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.417920] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.417922] pci_bus 0000:02: resource 1 [mem 0xc0200000-0xc03fffff]
[ 0.417924] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.417927] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
[ 0.417929] pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff]
[ 0.417931] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.417933] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.417935] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.417938] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref]
[ 0.417940] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.417942] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.417944] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref]
[ 0.417946] pci_bus 0000:15: resource 0 [io 0x4000-0x7fff]
[ 0.417948] pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff]
[ 0.417951] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.417953] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
[ 0.417955] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
[ 0.417957] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.417959] pci_bus 0000:15: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.417961] pci_bus 0000:15: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.417963] pci_bus 0000:15: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.417965] pci_bus 0000:15: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.417968] pci_bus 0000:16: resource 0 [io 0x4000-0x40ff]
[ 0.417970] pci_bus 0000:16: resource 1 [io 0x4400-0x44ff]
[ 0.417972] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[ 0.417974] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
[ 0.418010] NET: Registered protocol family 2
[ 0.418192] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.419466] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.422828] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.423355] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.423415] TCP reno registered
[ 0.423479] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.423575] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.423795] NET: Registered protocol family 1
[ 0.423868] pci 0000:00:02.0: Boot video device
[ 0.424112] PCI: CLS 64 bytes, default 64
[ 0.424159] Trying to unpack rootfs image as initramfs...
[ 0.426269] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 0.427686] Freeing initrd memory: 1280k freed
[ 0.427961] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.428117] Placing 64MB software IO TLB between ffff8800b94a1000 - ffff8800bd4a1000
[ 0.428188] software IO TLB at phys 0xb94a1000 - 0xbd4a1000
[ 0.428260] Simple Boot Flag at 0x35 set to 0x1
[ 0.429301] audit: initializing netlink socket (disabled)
[ 0.429367] type=2000 audit(1309374181.428:1): initialized
[ 0.440272] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.463012] VFS: Disk quotas dquot_6.5.2
[ 0.463164] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.463336] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.463451] msgmni has been set to 7717
[ 0.463851] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.463922] io scheduler noop registered
[ 0.463978] io scheduler deadline registered (default)
[ 0.464200] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.464252] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.464449] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.464496] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.464692] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.464740] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.464933] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.464981] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.465261] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.465325] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.465346] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.465406] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.465469] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.465489] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.465552] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.465572] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.465635] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.465760] intel_idle: MWAIT substates: 0x3122220
[ 0.465762] intel_idle: does not run on family 6 model 23
[ 0.465849] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.466072] ACPI: Lid Switch [LID]
[ 0.466200] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.466273] ACPI: Sleep Button [SLPB]
[ 0.466416] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.466488] ACPI: Power Button [PWRF]
[ 0.466589] ERST: Table is not found!
[ 0.498002] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.648433] Linux agpgart interface v0.103
[ 0.648641] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.648825] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.650609] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.650876] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.651049] [drm] Initialized drm 1.1.0 20060810
[ 0.651150] [drm] radeon defaulting to userspace modesetting.
[ 0.652289] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.652350] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.652413] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.652475] i915 0000:00:02.0: setting latency timer to 64
[ 0.711262] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 0.711268] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.711329] [drm] Driver supports precise vblank timestamp query.
[ 0.711429] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.082459] fbcon: inteldrmfb (fb0) is primary device
[ 1.132372] Console: switching to colour frame buffer device 180x56
[ 1.136465] fb0: inteldrmfb frame buffer device
[ 1.136490] drm: registered panic notifier
[ 1.245744] acpi device:02: registered as cooling_device0
[ 1.245893] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.245944] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.246051] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.248149] brd: module loaded
[ 1.248278] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.256652] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.256707] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.256933] mousedev: PS/2 mouse device common for all mice
[ 1.257026] rtc_cmos 00:07: RTC can wake from S4
[ 1.257189] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.257248] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.257322] cpuidle: using governor ladder
[ 1.257347] cpuidle: using governor menu
[ 1.257584] TCP cubic registered
[ 1.257605] NET: Registered protocol family 17
[ 1.263123] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.269868] registered taskstats version 1
[ 1.279931] rtc_cmos 00:07: setting system clock to 2011-06-29 19:03:03 UTC (1309374183)
[ 1.280146] RAMDISK: lzo image found at block 0
[ 1.295713] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
[ 1.301788] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[ 1.304438] Intel AES-NI instructions are not detected.
[ 1.320635] SCSI subsystem initialized
[ 1.324996] libata version 3.00 loaded.
[ 1.326114] ahci 0000:00:1f.2: version 3.0
[ 1.326131] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.327615] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.327655] ahci: SSS flag set, parallel bus scan disabled
[ 1.329116] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.330565] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
[ 1.332053] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.332860] scsi0 : ahci
[ 1.334430] scsi1 : ahci
[ 1.335947] scsi2 : ahci
[ 1.337469] scsi3 : ahci
[ 1.339161] ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 45
[ 1.340572] ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 45
[ 1.342363] ata3: DUMMY
[ 1.343704] ata4: DUMMY
[ 1.428014] Refined TSC clocksource calibration: 2526.999 MHz.
[ 1.429390] Switching to clocksource tsc
[ 1.664017] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.671543] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.671547] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.672935] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.680639] ata1.00: ATA-8: OCZ-VERTEX2, 1.32, max UDMA/133
[ 1.681995] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.690639] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.690643] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.692027] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.700641] ata1.00: configured for UDMA/133
[ 1.702122] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.32 PQ: 0 ANSI: 5
[ 2.020017] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.023918] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.024936] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.024939] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.027405] ata2.00: ATAPI: Optiarc DVD RW AD-7910S, 1.D0, max UDMA/100
[ 2.031722] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.032803] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.032807] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.035277] ata2.00: configured for UDMA/100
[ 2.039005] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7910S 1.D0 PQ: 0 ANSI: 5
[ 2.041670] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 2.043186] sd 0:0:0:0: [sda] Write Protect is off
[ 2.044597] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.044617] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.046739] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 2.048661] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.069662] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 2.071753] SGI XFS Quota Management subsystem
[ 6.852356] XFS (dm-0): Mounting Filesystem
[ 6.905218] XFS (dm-0): Ending clean mount
[ 6.906714] VFS: Mounted root (xfs filesystem) readonly on device 254:0.
[ 6.908218] Trying to move old root to /initrd ... okay
[ 6.910355] devtmpfs: mounted
[ 6.912766] Freeing unused kernel memory: 568k freed
[ 6.914412] Write protecting the kernel read-only data: 8192k
[ 6.921718] Freeing unused kernel memory: 1988k freed
[ 6.924704] Freeing unused kernel memory: 280k freed
[ 7.241811] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 7.247367] usbcore: registered new interface driver usbfs
[ 7.247404] usbcore: registered new interface driver hub
[ 7.250287] usbcore: registered new device driver usb
[ 7.254041] iTCO_vendor_support: vendor-support=0
[ 7.261683] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 7.261800] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
[ 7.261960] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.262414] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.262440] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 7.262444] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 7.262455] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 7.262472] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 7.262476] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 7.262502] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 7.262545] ehci_hcd 0000:00:1a.7: debug port 1
[ 7.268193] ACPI: acpi_idle registered with cpuidle
[ 7.272881] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 7.272883] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 7.277003] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.281099] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 7.281124] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
[ 7.296122] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 7.296150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.296153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.296155] usb usb1: Product: EHCI Host Controller
[ 7.296157] usb usb1: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f ehci_hcd
[ 7.296159] usb usb1: SerialNumber: 0000:00:1a.7
[ 7.296339] hub 1-0:1.0: USB hub found
[ 7.296344] hub 1-0:1.0: 6 ports detected
[ 7.296479] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.296492] e1000e 0000:00:19.0: setting latency timer to 64
[ 7.296642] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 7.303693] Monitor-Mwait will be used to enter C-1 state
[ 7.306504] Monitor-Mwait will be used to enter C-2 state
[ 7.307560] Monitor-Mwait will be used to enter C-3 state
[ 7.307570] Marking TSC unstable due to TSC halts in idle
[ 7.312452] Switching to clocksource hpet
[ 7.326047] Monitor-Mwait will be used to enter C-3 state
[ 7.342869] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.342872] ACPI: Thermal Zone [THM0] (46 C)
[ 7.359961] Non-volatile memory driver v1.3
[ 7.362250] wmi: Mapper loaded
[ 7.362996] thermal LNXTHERM:01: registered as thermal_zone1
[ 7.362999] ACPI: Thermal Zone [THM1] (43 C)
[ 7.366541] tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6)
[ 7.366544] tpm_tis 00:0a: Intel iTPM workaround enabled
[ 7.366607] firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.366750] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.366791] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.370204] cfg80211: Calling CRDA to update world regulatory domain
[ 7.373744] sdhci: Secure Digital Host Controller Interface driver
[ 7.373746] sdhci: Copyright(c) Pierre Ossman
[ 7.373885] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.373888] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.374027] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.411234] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 7.411236] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 7.411238] thinkpad_acpi: ThinkPad BIOS 7UET91WW (3.21 ), EC 7VHT16WW-1.06
[ 7.411240] thinkpad_acpi: Lenovo ThinkPad T400, model 2764CTO
[ 7.431757] firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 7.432079] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
[ 7.438598] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 7.443139] thinkpad_acpi: radio switch found; radios are enabled
[ 7.449772] ACPI: Battery Slot [BAT0] (battery present)
[ 7.450536] ACPI: AC Adapter [AC] (on-line)
[ 7.453359] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 7.459111] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 7.459420] Registered led device: tpacpi::thinklight
[ 7.459449] Registered led device: tpacpi::power
[ 7.459464] Registered led device: tpacpi::standby
[ 7.459480] Registered led device: tpacpi::thinkvantage
[ 7.464973] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 7.465083] thinkpad_acpi: Console audio control enabled, mode: override (read/write)
[ 7.466558] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 7.466765] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 7.466768] iwlagn: Copyright(c) 2003-2011 Intel Corporation
[ 7.466862] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.466871] iwlagn 0000:03:00.0: setting latency timer to 64
[ 7.467381] iwlagn 0000:03:00.0: Detected Intel(R) WiMAX/WiFi Link 5350 AGN, REV=0x24
[ 7.502121] iwlagn 0000:03:00.0: device EEPROM VER=0x21e, CALIB=0x4
[ 7.502124] iwlagn 0000:03:00.0: Device SKU: 0Xb
[ 7.502126] iwlagn 0000:03:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
[ 7.502136] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 7.502211] iwlagn 0000:03:00.0: irq 47 for MSI/MSI-X
[ 7.508366] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:21:86:a2:19:06
[ 7.508369] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 7.508393] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 7.508417] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 7.508423] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 7.508437] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 7.508461] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7.508465] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.508477] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 7.508511] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.512432] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 7.512451] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
[ 7.576863] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 7.576867] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[ 7.576874] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x7fff]
[ 7.576877] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4800000-0xf7ffffff]
[ 7.576880] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4800000-0xf7ffffff: excluding 0xf4800000-0xf4b7ffff
[ 7.576894] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 7.576896] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff: excluding 0xf0000000-0xf3ffffff
[ 7.577374] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
[ 7.577397] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.578422] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 7.578448] mmc0: no vmmc regulator found
[ 7.579467] Registered led device: mmc0::
[ 7.580551] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
[ 7.628061] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 7.628098] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.628101] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.628103] usb usb2: Product: EHCI Host Controller
[ 7.628105] usb usb2: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f ehci_hcd
[ 7.628107] usb usb2: SerialNumber: 0000:00:1d.7
[ 7.628259] hub 2-0:1.0: USB hub found
[ 7.628263] hub 2-0:1.0: 6 ports detected
[ 7.631321] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.631385] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 7.631415] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.659279] iwlagn 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692
[ 7.659610] Registered led device: phy0-led
[ 7.667917] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 7.688203] udevd[1442]: renamed network interface wlan0 to eth1
[ 7.704988] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.707685] ALSA sound/pci/hda/hda_codec.c:3771 hda_codec: model 'laptop' is selected
[ 7.707742] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 7.710799] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.710870] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.710933] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.711344] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 7.711347] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 7.711357] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.711366] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 7.711370] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 7.711383] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 7.711431] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 7.711475] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.711477] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.711479] usb usb3: Product: UHCI Host Controller
[ 7.711481] usb usb3: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.711483] usb usb3: SerialNumber: 0000:00:1a.0
[ 7.711589] hub 3-0:1.0: USB hub found
[ 7.711594] hub 3-0:1.0: 2 ports detected
[ 7.711682] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 7.711689] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 7.711692] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 7.711698] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 7.711737] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 7.711777] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.711779] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.711781] usb usb4: Product: UHCI Host Controller
[ 7.711783] usb usb4: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.711785] usb usb4: SerialNumber: 0000:00:1a.1
[ 7.711880] hub 4-0:1.0: USB hub found
[ 7.711884] hub 4-0:1.0: 2 ports detected
[ 7.711964] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 7.711967] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 7.711974] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 7.711981] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 7.711984] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 7.711991] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 7.712463] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 7.712500] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.712502] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.712504] usb usb5: Product: UHCI Host Controller
[ 7.712506] usb usb5: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.712508] usb usb5: SerialNumber: 0000:00:1a.2
[ 7.712599] hub 5-0:1.0: USB hub found
[ 7.712603] hub 5-0:1.0: 2 ports detected
[ 7.712691] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 7.712694] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 7.712699] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.712705] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7.712708] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.712715] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 7.712743] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 7.712781] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.712784] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.712786] usb usb6: Product: UHCI Host Controller
[ 7.712788] usb usb6: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.712789] usb usb6: SerialNumber: 0000:00:1d.0
[ 7.712885] hub 6-0:1.0: USB hub found
[ 7.712889] hub 6-0:1.0: 2 ports detected
[ 7.712971] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.712978] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7.712981] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.712988] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 7.713019] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 7.713055] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.713057] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.713059] usb usb7: Product: UHCI Host Controller
[ 7.713061] usb usb7: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.713063] usb usb7: SerialNumber: 0000:00:1d.1
[ 7.713146] hub 7-0:1.0: USB hub found
[ 7.713150] hub 7-0:1.0: 2 ports detected
[ 7.713231] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.713237] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7.713241] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.713247] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 7.713278] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 7.713315] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.713318] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.713320] usb usb8: Product: UHCI Host Controller
[ 7.713322] usb usb8: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.713323] usb usb8: SerialNumber: 0000:00:1d.2
[ 7.713407] hub 8-0:1.0: USB hub found
[ 7.713411] hub 8-0:1.0: 2 ports detected
[ 7.852041] usb 1-6: new high speed USB device number 4 using ehci_hcd
[ 7.928164] firewire_core: created device fw0: GUID 00061b032a347baa, S400
[ 7.996141] usb 1-6: New USB device found, idVendor=17ef, idProduct=1004
[ 7.996144] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 7.996146] usb 1-6: Product: Integrated Camera
[ 7.996148] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd.
[ 7.996149] usb 1-6: SerialNumber: SN0001
[ 8.003007] Linux media interface: v0.10
[ 8.007661] Linux video capture interface: v2.00
[ 8.010008] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004)
[ 8.046965] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input11
[ 8.047025] usbcore: registered new interface driver uvcvideo
[ 8.047027] USB Video Class driver (v1.1.0)
[ 8.108297] usb 2-4: new high speed USB device number 2 using ehci_hcd
[ 8.177733] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000/0x20000
[ 8.177739] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 8.220770] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 8.313396] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
[ 8.313399] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.313401] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
[ 8.313403] usb 2-4: Manufacturer: Ericsson
[ 8.313405] usb 2-4: SerialNumber: 3541430228088360
[ 8.361701] cdc_wdm 2-4:1.5: cdc-wdm-176: USB WDM device
[ 8.361890] cdc_wdm 2-4:1.6: cdc-wdm-175: USB WDM device
[ 8.361906] usbcore: registered new interface driver cdc_wdm
[ 8.365304] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
[ 8.366089] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
[ 8.366677] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
[ 8.367060] usbcore: registered new interface driver cdc_acm
[ 8.367062] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8.370610] cdc_ether 2-4:1.7: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 8.370628] usbcore: registered new interface driver cdc_ether
[ 8.371407] usbcore: registered new interface driver zaurus
[ 8.464054] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 8.646476] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
[ 8.646478] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.646481] usb 3-1: Product: USB Receiver
[ 8.646482] usb 3-1: Manufacturer: Logitech
[ 8.661670] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input13
[ 8.661798] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
[ 8.664811] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input14
[ 8.664968] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
[ 8.670560] generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input2
[ 8.670574] usbcore: registered new interface driver usbhid
[ 8.670576] usbhid: USB HID core driver
[ 8.764028] usb 4-2: new full speed USB device number 2 using uhci_hcd
[ 8.934783] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145
[ 8.934786] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.934788] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[ 8.934790] usb 4-2: Manufacturer: Lenovo Computer Corp
[ 8.949896] Bluetooth: Core ver 2.16
[ 8.950168] NET: Registered protocol family 31
[ 8.950170] Bluetooth: HCI device and connection manager initialized
[ 8.950172] Bluetooth: HCI socket layer initialized
[ 8.950174] Bluetooth: L2CAP socket layer initialized
[ 8.950210] Bluetooth: SCO socket layer initialized
[ 8.953285] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 8.953621] usbcore: registered new interface driver btusb
[ 9.981715] NET: Registered protocol family 10
[ 10.128633] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 10.184119] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 10.185586] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.928932] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 14.168602] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input15
[ 14.276946] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.510749] eth1: authenticate with 00:27:19:d8:98:f2 (try 1)
[ 17.512465] eth1: authenticated
[ 17.529707] eth1: associate with 00:27:19:d8:98:f2 (try 1)
[ 17.536194] eth1: RX AssocResp from 00:27:19:d8:98:f2 (capab=0x431 status=0 aid=2)
[ 17.536202] eth1: associated
[ 17.545913] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 24.985812] ------------[ cut here ]------------
[ 24.985820] WARNING: at kernel/printk.c:322 do_syslog+0x89/0x438()
[ 24.985821] Hardware name: 2764CTO
[ 24.985823] Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG (deprecated).
[ 24.985824] Modules linked in: sch_sfq ipv6 ext2 mbcache md_mod acpi_cpufreq mperf btusb bluetooth crc16 usbhid hid zaurus cdc_ether cdc_acm usbnet cdc_wdm mii joydev uvcvideo videodev
v4l2_compat_ioctl32 media snd_hda_codec_conexant uhci_hcd arc4 pcmcia iwlagn mac80211 sdhci_pci thinkpad_acpi sdhci ac battery cfg80211 sr_mod yenta_socket pcmcia_rsrc sg firewire_ohci
cdrom nvram mmc_core tpm_tis psmouse firewire_core tpm crc_itu_t pcmcia_core serio_raw wmi rfkill tpm_bios thermal snd_hda_intel evdev snd_hda_codec snd_hwdep snd_pcm snd_timer pcspkr snd
e1000e processor soundcore snd_page_alloc ehci_hcd iTCO_wdt iTCO_vendor_support usbcore i2c_i801 xfs sd_mod crc_t10dif ahci libahci libata scsi_mod cbc cryptd aes_x86_64 aes_generic
dm_crypt dm_mod [last unloaded: scsi_wait_scan]
[ 24.985882] Pid: 2716, comm: syslog-ng Not tainted 3.0.0-rc5-00063-g0d72c6f #6
[ 24.985884] Call Trace:
[ 24.985888] [<ffffffff8103aa14>] warn_slowpath_common+0x7e/0x96
[ 24.985890] [<ffffffff8103aac0>] warn_slowpath_fmt+0x41/0x43
[ 24.985899] [<ffffffff81043da1>] ? ns_capable+0x35/0x4a
[ 24.985902] [<ffffffff8103b060>] do_syslog+0x89/0x438
[ 24.985905] [<ffffffff81103d9c>] ? _d_rehash+0x44/0x46
[ 24.985907] [<ffffffff81103dc4>] ? d_rehash+0x26/0x2b
[ 24.985910] [<ffffffff81143c6f>] kmsg_open+0x17/0x19
[ 24.985913] [<ffffffff8113afe4>] proc_reg_open+0xab/0x148
[ 24.985916] [<ffffffff81143c58>] ? kmsg_release+0x18/0x18
[ 24.985918] [<ffffffff81143c40>] ? seq_open_net+0x76/0x76
[ 24.985920] [<ffffffff8113af39>] ? proc_alloc_inode+0x9c/0x9c
[ 24.985924] [<ffffffff810f1372>] __dentry_open+0x1fb/0x312
[ 24.985927] [<ffffffff810fc9c3>] ? do_lookup+0x240/0x298
[ 24.985930] [<ffffffff810f2337>] nameidata_to_filp+0x5b/0x62
[ 24.985933] [<ffffffff810fe2d2>] do_last+0x5c4/0x725
[ 24.985935] [<ffffffff810fefa7>] path_openat+0xc3/0x368
[ 24.985938] [<ffffffff8108b7e3>] ? call_rcu+0x10/0x12
[ 24.985941] [<ffffffff810fc077>] ? putname+0x2d/0x36
[ 24.985943] [<ffffffff810ff27f>] do_filp_open+0x33/0x81
[ 24.985946] [<ffffffff811091ac>] ? alloc_fd+0x104/0x116
[ 24.985948] [<ffffffff810f243d>] do_sys_open+0xff/0x191
[ 24.985951] [<ffffffff810f24ea>] sys_open+0x1b/0x1d
[ 24.985955] [<ffffffff81405d7b>] system_call_fastpath+0x16/0x1b
[ 24.985957] ---[ end trace a9d91a075e12ef1f ]---
[ 25.015393] auditd (2728): /proc/2728/oom_adj is deprecated, please use /proc/2728/oom_score_adj instead.
[ 25.395976] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.395979] Bluetooth: BNEP filters: protocol multicast
[ 25.420907] Bluetooth: RFCOMM TTY layer initialized
[ 25.420912] Bluetooth: RFCOMM socket layer initialized
[ 25.420913] Bluetooth: RFCOMM ver 1.11
[ 27.454911] iwlagn 0000:03:00.0: Aggregation not enabled for tid 0 because load = 4
[ 28.344050] eth1: no IPv6 routers present
[ 36.089364] ata1.00: configured for UDMA/133
[ 36.089367] ata1: EH complete
[ 52.731642] iwlagn 0000:03:00.0: Aggregation not enabled for tid 0 because load = 0
[ 60.342925] iwlagn 0000:03:00.0: Aggregation not enabled for tid 0 because load = 7
[ 79.265077] iwlagn 0000:03:00.0: Aggregation not enabled for tid 0 because load = 7
[ 95.972048] iwlagn 0000:03:00.0: iwlagn_tx_agg_start on ra = 00:27:19:d8:98:f2 tid = 0
[ 443.234662] PM: Syncing filesystems ... done.
[ 444.129851] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 444.144143] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 444.160275] Suspending console(s) (use no_console_suspend to debug)
[ 444.329558] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 444.329659] sd 0:0:0:0: [sda] Stopping disk
[ 444.413237] ACPI handle has no context!
[ 444.413257] sdhci-pci 0000:15:00.2: PCI INT C disabled
[ 444.413269] ACPI handle has no context!
[ 444.413608] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 444.413626] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 444.413633] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 444.413646] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 444.413715] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[ 444.413731] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 444.413746] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 444.413769] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 444.420094] ACPI handle has no context!
[ 444.428075] i915 0000:00:02.0: power state changed by ACPI to D3
[ 444.508568] e1000e 0000:00:19.0: PCI INT A disabled
[ 444.508582] e1000e 0000:00:19.0: PME# enabled
[ 444.508598] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 444.516367] HDA Intel 0000:00:1b.0: PCI INT B disabled
[ 444.532090] PM: suspend of devices complete after 370.023 msecs
[ 444.564047] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[ 444.564200] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 444.580046] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[ 444.580109] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3
[ 444.600045] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 444.600174] PM: late suspend of devices complete after 68.076 msecs
[ 444.602233] ACPI: Preparing to enter system sleep state S3
[ 444.760090] PM: Saving platform NVS memory
[ 444.770926] Disabling non-boot CPUs ...
[ 444.771341] Broke affinity for irq 9
[ 444.771352] Broke affinity for irq 12
[ 444.771370] Broke affinity for irq 17
[ 444.772473] CPU 1 is now offline
[ 444.773170] Extended CMOS year: 2000
[ 444.773170] ACPI: Low-level resume complete
[ 444.773170] PM: Restoring platform NVS memory
[ 444.773170] Extended CMOS year: 2000
[ 444.773170] Enabling non-boot CPUs ...
[ 444.781347] Booting Node 0 Processor 1 APIC 0x1
[ 444.781349] smpboot cpu 1: start_ip = 99000
[ 444.772443] Disabled fast string operations
[ 444.876122] Switched to NOHz mode on CPU #1
[ 444.908771] CPU1 is up
[ 444.914176] ACPI: Waking up from system sleep state S3
[ 445.532240] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[ 445.532299] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[ 445.532326] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 445.532352] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[ 445.552043] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 445.552053] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 445.552101] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 445.552125] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 445.552132] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 445.552182] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 445.552207] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 445.552215] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 445.552261] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 445.552282] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 445.552290] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 445.552349] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 445.552381] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 445.552391] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 445.552454] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[ 445.552518] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc051c041)
[ 445.552530] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xc030c020)
[ 445.552542] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x9090)
[ 445.552564] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 445.552655] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc011c001)
[ 445.552669] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x200000f0, writing 0x8080)
[ 445.552691] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 445.552798] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 445.552905] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 445.552965] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 445.552972] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 445.553018] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 445.553040] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 445.553047] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 445.553095] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 445.553159] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 445.553232] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 445.553264] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 445.553274] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 445.553455] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 445.568054] firewire_ohci 0000:15:00.1: BAR 0: set to [mem 0xf4801000-0xf48017ff] (PCI address [0xf4801000-0xf48017ff])
[ 445.568108] firewire_ohci 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[ 445.568123] firewire_ohci 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 445.584049] sdhci-pci 0000:15:00.2: BAR 0: set to [mem 0xf4801800-0xf48018ff] (PCI address [0xf4801800-0xf48018ff])
[ 445.584101] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[ 445.584117] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 445.585118] PM: early resume of devices complete after 53.028 msecs
[ 445.585769] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 445.585784] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 445.585823] usb usb4: root hub lost power or was reset
[ 445.585922] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 445.585976] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 445.585987] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 445.585994] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 445.586002] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 445.586038] usb usb7: root hub lost power or was reset
[ 445.586048] usb usb8: root hub lost power or was reset
[ 445.586102] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 445.586120] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 445.586131] e1000e 0000:00:19.0: PME# disabled
[ 445.586144] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 445.586172] pci 0000:00:1e.0: setting latency timer to 64
[ 445.586234] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 445.586244] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 445.586252] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 445.586260] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 445.586343] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 445.586356] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 445.586423] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 445.586611] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 445.588828] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 445.588876] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 445.588931] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 445.588968] usb usb3: root hub lost power or was reset
[ 445.589000] i915 0000:00:02.0: power state changed by ACPI to D0
[ 445.589043] ahci 0000:00:1f.2: setting latency timer to 64
[ 445.589214] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 445.589226] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 445.589239] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 445.589276] usb usb5: root hub lost power or was reset
[ 445.589299] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 445.589312] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 445.589327] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 445.589438] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 445.589450] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 445.589463] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 445.589497] usb usb6: root hub lost power or was reset
[ 445.589526] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 445.589539] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 445.589552] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 445.589672] i915 0000:00:02.0: power state changed by ACPI to D0
[ 445.589685] sd 0:0:0:0: [sda] Starting disk
[ 445.589692] i915 0000:00:02.0: setting latency timer to 64
[ 445.605236] legacy_resume(): pnp_bus_resume+0x0/0x67 returns -19
[ 445.605238] PM: Device 00:0a failed to resume: error -19
[ 445.648152] firewire_core: skipped bus generations, destroying all nodes
[ 445.696172] Extended CMOS year: 2000
[ 445.912114] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 445.912159] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 445.915033] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 445.916103] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 445.916113] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 445.920544] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 445.921627] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 445.921636] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 445.922648] ata2.00: configured for UDMA/100
[ 445.952074] usb 1-6: reset high speed USB device number 4 using ehci_hcd
[ 446.034593] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 446.034603] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 446.034611] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 446.149293] firewire_core: rediscovered device fw0
[ 446.176887] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 446.176897] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 446.176905] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 446.196086] usb 4-2: reset full speed USB device number 2 using uhci_hcd
[ 446.236714] ata1.00: configured for UDMA/133
[ 446.288325] thinkpad_acpi: restoring fan level to 0x07
[ 446.342290] btusb 4-2:1.0: no reset_resume for driver btusb?
[ 446.342298] btusb 4-2:1.1: no reset_resume for driver btusb?
[ 446.592435] PM: resume of devices complete after 1007.183 msecs
[ 446.593508] Restarting tasks ...
[ 446.593926] usb 2-4: USB disconnect, device number 2
[ 446.595658] cdc_ether 2-4:1.7: wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device
[ 446.624262] done.
[ 446.624267] video LNXVIDEO:00: Restoring backlight state
[ 471.580117] iwlagn 0000:03:00.0: iwlagn_tx_agg_start on ra = 00:27:19:d8:98:f2 tid = 0


config:

#
# Automatically generated make config: don't edit
# Linux/x86_64 3.0.0-rc4 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
# CONFIG_SPARSE_IRQ is not set

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_BLK_CGROUP=m
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=m
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=m
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=m
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_EINJ=m
CONFIG_ACPI_APEI_ERST_DEBUG=m
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_PCI_IOV=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
CONFIG_L2TP=m
# CONFIG_L2TP_DEBUGFS is not set
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
# CONFIG_ECONET_NATIVE is not set
CONFIG_WAN_ROUTER=m
# CONFIG_PHONET is not set
CONFIG_IEEE802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
# CONFIG_GACT_PROB is not set
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_HAVE_BPF_JIT=y
CONFIG_BPF_JIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_PCH_CAN is not set
# CONFIG_CAN_SJA1000 is not set
# CONFIG_CAN_C_CAN is not set

#
# CAN USB interfaces
#
# CONFIG_CAN_EMS_USB is not set
# CONFIG_CAN_ESD_USB2 is not set
# CONFIG_CAN_SOFTING is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_ATH3K is not set
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=m
# CONFIG_NET_9P is not set
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=m
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_OSD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=m
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_IWMC3200TOP=m
# CONFIG_IWMC3200TOP_DEBUG is not set
# CONFIG_IWMC3200TOP_DEBUGFS is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=m

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEACPI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_PLATFORM=m
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=m
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_MPIIX=m
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_LEGACY=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MULTICORE_RAID456=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_RAID=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
# CONFIG_LOOPBACK_TARGET_CDB_DEBUG is not set
CONFIG_TCM_FC=m
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_MII=m
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=m
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_GPIO=m
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
CONFIG_E1000E=m
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_STMMAC_ETH is not set
# CONFIG_PCH_GBE is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_BNA is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_NET_RNDIS_WLAN=m
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_MWL8K is not set
CONFIG_ATH_COMMON=m
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
CONFIG_ATH9K_RATE_CONTROL=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
# CONFIG_CARL9170 is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLAGN=m

#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLWIFI_DEVICE_SVTOOL=y
CONFIG_IWL_P2P=y
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_WL1251 is not set
# CONFIG_WL12XX_MENU is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set

#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_SDIO=m
CONFIG_WIMAX_IWMC3200_SDIO=y
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
# CONFIG_USB_VL600 is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKEHARD is not set

#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=m
# CONFIG_CAIF_SPI_SLAVE is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
CONFIG_VMXNET3=m
# CONFIG_ISDN is not set
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
# CONFIG_KEYBOARD_TCA6416 is not set
CONFIG_KEYBOARD_MATRIX=m
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=m
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=m
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=m
# CONFIG_R3964 is not set
CONFIG_APPLICOM=m

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=1024
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=m
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m
CONFIG_I2C_INTEL_MID=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set

#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_BASIC_MMIO_CORE=m
CONFIG_GPIO_BASIC_MMIO=m
# CONFIG_GPIO_IT8761E is not set
CONFIG_GPIO_SCH=m
# CONFIG_GPIO_VX855 is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=m
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_TEST_POWER=m
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_GPIO=m
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_MAX16064 is not set
# CONFIG_SENSORS_MAX34440 is not set
# CONFIG_SENSORS_MAX8688 is not set
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=m
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
CONFIG_RC_CORE=m
CONFIG_LIRC=m
CONFIG_RC_MAP=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_RC5_SZ_DECODER=m
CONFIG_IR_LIRC_CODEC=m
# CONFIG_IR_ENE is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_ITE_CIR is not set
# CONFIG_IR_FINTEK is not set
# CONFIG_IR_NUVOTON is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
CONFIG_IR_WINBOND_CIR=m
CONFIG_RC_LOOPBACK=m
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_CONTIG=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#

#
# RDS decoders
#

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=m

#
# Video and audio decoders
#

#
# MPEG video encoders
#

#
# Video encoders
#

#
# Camera sensor devices
#

#
# Video improvement chips
#

#
# Miscelaneous helper chips
#
CONFIG_VIDEO_VIVI=m
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_TIMBERDALE=m
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
# CONFIG_USB_GSPCA_BENQ is not set
CONFIG_USB_GSPCA_CONEX=m
# CONFIG_USB_GSPCA_CPIA1 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_KINECT=m
# CONFIG_USB_GSPCA_KONICA is not set
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
# CONFIG_USB_GSPCA_NW80X is not set
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
# CONFIG_USB_GSPCA_OV534_9 is not set
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
# CONFIG_USB_GSPCA_SN9C2028 is not set
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
# CONFIG_USB_GSPCA_SPCA1528 is not set
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
# CONFIG_USB_GSPCA_SQ930X is not set
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
# CONFIG_USB_GSPCA_VICAM is not set
# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
CONFIG_USB_GSPCA_ZC3XX=m
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_KMS is not set
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=10
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_FIREWIRE is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=m
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWII_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_ARVO is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_KOVAPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
# CONFIG_HID_WACOM is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# Enable Host or Gadget support to see Inventra options
#

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=m
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_MOTOROLA=m
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
CONFIG_USB_SERIAL_QUALCOMM=m
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=m
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SDRICOH_CS=m
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_REGULATOR=m
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_NFC_DEVICES is not set
CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_INTEL_MID_DMAC=m
CONFIG_INTEL_IOATDMA=m
CONFIG_TIMB_DMA=m
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV=m
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_VIDEO_GO7007 is not set
# CONFIG_VIDEO_TM6000 is not set
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_HOST=m
# CONFIG_USBIP_DEBUG is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_BRCMUTIL is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTL8192E is not set
# CONFIG_R8712U is not set
# CONFIG_RTS_PSTOR is not set
# CONFIG_TRANZPORT is not set
CONFIG_POHMELFS=m
# CONFIG_POHMELFS_DEBUG is not set
CONFIG_POHMELFS_CRYPTO=y
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
CONFIG_DRM_VMWGFX=m
# CONFIG_DRM_NOUVEAU is not set

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_HYPERV is not set
# CONFIG_VME_BUS is not set
# CONFIG_DX_SEP is not set
# CONFIG_IIO is not set
CONFIG_XVMALLOC=y
CONFIG_ZRAM=m
# CONFIG_ZRAM_DEBUG is not set
CONFIG_ZCACHE=m
# CONFIG_WLAGS49_H2 is not set
# CONFIG_WLAGS49_H25 is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_VIDEO_DT3155 is not set
CONFIG_CRYSTALHD=m
# CONFIG_FB_XGI is not set
# CONFIG_LIRC_STAGING is not set
# CONFIG_EASYCAP is not set
# CONFIG_SOLO6X10 is not set
CONFIG_ACPI_QUICKSTART=m
CONFIG_MACH_NO_WESTBRIDGE=y
# CONFIG_ATH6K_LEGACY is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_DRM_PSB is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_INTEL_MEI=m
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
CONFIG_INTEL_MENLOW=m
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WMI is not set
CONFIG_ACPI_WMI=m
# CONFIG_MSI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
CONFIG_ACPI_CMPC=m
CONFIG_INTEL_IPS=m
CONFIG_IBM_RTL=m
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=m
# CONFIG_INTEL_OAKTRAIL is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_EFI_VARS is not set
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=m
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
CONFIG_SIGMA=m
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
CONFIG_CACHEFILES_HISTOGRAM=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_LOGFS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFS_FSCACHE=y
CONFIG_NFS_USE_LEGACY_DNS=y
CONFIG_NFS_USE_NEW_IDMAPPER=y
CONFIG_NFSD=m
# CONFIG_NFSD_DEPRECATED is not set
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_CEPH_FS=m
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
CONFIG_CIFS_FSCACHE=y
# CONFIG_CIFS_ACL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_TRUSTED_KEYS=m
CONFIG_ENCRYPTED_KEYS=m
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_VHOST_NET=m
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y


--
Arkadiusz Miśkiewicz PLD/Linux Team
arekm / maven.pl http://ftp.pld-linux.org/

2011-06-29 19:59:36

by Alan Stern

Subject: Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram

On Wed, 29 Jun 2011, Arkadiusz Miskiewicz wrote:

>
> Hi,
>
> Something broke between rc3 and rc5. Thinkpad t400, logitech usb mouse.
> After resume from ram usb device no longer works. Somewhere around rc3 it was
> working fine.

Obviously you can try bisection to find the problem. But if you don't
want to go through that, you could post the dmesg from a kernel that
has CONFIG_USB_DEBUG enabled.

Alan Stern

2011-06-29 20:59:41

by Arkadiusz Miskiewicz

Subject: Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram

On Wednesday 29 of June 2011, Alan Stern wrote:
> On Wed, 29 Jun 2011, Arkadiusz Miskiewicz wrote:
> > Hi,
> >
> > Something broke between rc3 and rc5. Thinkpad t400, logitech usb mouse.
> > After resume from ram usb device no longer works. Somewhere around rc3 it
> > was working fine.
>
> Obviously you can try bisection to find the problem. But if you don't
> want to go through that, you could post the dmesg from a kernel that
> has CONFIG_USB_DEBUG enabled.

CONFIG_USB_DEBUG will be faster but I'll bisect if no one figures out what's
wrong.

Note that I tried to unplug & plugin usb mouse after all this dmesg but
nothing new appeared in dmesg - kernel didn't notice that I did that.

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-rc5-00063-g0d72c6f (arekm@ixion-pld) (gcc
version 4.6.1 20110627 (release) (PLD-Linux) ) #7 SMP PREEMPT Wed Jun 29
22:51:36 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0
root=/dev/mapper/lrootfs ro resume=/dev/sda2 panic=60 reboot=acpi
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd4a1000 (usable)
[ 0.000000] BIOS-e820: 00000000bd4a1000 - 00000000bd4a7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd4a7000 - 00000000bd5b7000 (usable)
[ 0.000000] BIOS-e820: 00000000bd5b7000 - 00000000bd60f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd60f000 - 00000000bd6c6000 (usable)
[ 0.000000] BIOS-e820: 00000000bd6c6000 - 00000000bd6d1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd6d1000 - 00000000bd6d4000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd6d4000 - 00000000bd6d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd6d8000 - 00000000bd6dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd6dc000 - 00000000bd6df000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd6df000 - 00000000bd706000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd706000 - 00000000bd708000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd708000 - 00000000bd90f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd90f000 - 00000000bd99f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd99f000 - 00000000bd9ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd9ff000 - 00000000bda00000 (usable)
[ 0.000000] BIOS-e820: 00000000bdc00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 2764CTO/2764CTO, BIOS 7UET91WW (3.21 ) 12/06/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 13C000000 mask FFC000000 uncachable
[ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 080000000 mask FC0000000 write-back
[ 0.000000] 4 base 100000000 mask FC0000000 write-back
[ 0.000000] 5 base 0BDE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000bde00000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xbda00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6480] f6480
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bda00000
[ 0.000000] 0000000000 - 00bda00000 page 2M
[ 0.000000] kernel direct mapping tables up to bda00000 @ bd6c2000-bd6c6000
[ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000
[ 0.000000] 0100000000 - 013c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 13c000000 @
13bffa000-13c000000
[ 0.000000] RAMDISK: 37eb0000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f6440 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bd949b5a 0009C (v01 LENOVO TP-7U 00003210
LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bd949d00 000F4 (v03 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bd94a10e 0FAE1 (v01 LENOVO TP-7U 00003210
MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bd98e000 00040
[ 0.000000] ACPI: SSDT 00000000bd949eb4 0025A (v01 LENOVO TP-7U 00003210
MSFT 03000000)
[ 0.000000] ACPI: ECDT 00000000bd959bef 00052 (v01 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bd959c41 00078 (v01 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bd959cb9 0003C (v01 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bd959cf5 00038 (v01 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: SLIC 00000000bd959dc2 00176 (v01 LENOVO TP-7U 00003210
LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bd959f38 00028 (v01 LENOVO TP-7U 00003210
LTP 00000001)
[ 0.000000] ACPI: ASF! 00000000bd959f60 000A0 (v16 LENOVO TP-7U 00003210
PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bd98d1fa 00568 (v01 LENOVO TP-7U 00003210
INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bd707000 00032 (v00 00000000
00000000)
[ 0.000000] ACPI: DMAR 00000000bd706000 00120 (v01 ? 00000001
00000000)
[ 0.000000] ACPI: SSDT 00000000bd6d3000 00655 (v01 PmRef CpuPm 00003000
INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bd6d2000 00274 (v01 PmRef Cpu0Tst 00003000
INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bd6d1000 00242 (v01 PmRef ApTst 00003000
INTL 20050624)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T400
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000013c000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000013c000000
[ 0.000000] NODE_DATA [000000013bffb000 - 000000013bffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880137600000-
ffff88013adfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0013c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bd4a1
[ 0.000000] 0: 0x000bd4a7 -> 0x000bd5b7
[ 0.000000] 0: 0x000bd60f -> 0x000bd6c6
[ 0.000000] 0: 0x000bd9ff -> 0x000bda00
[ 0.000000] 0: 0x00100000 -> 0x0013c000
[ 0.000000] On node 0 totalpages: 1021431
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 757409 pages, LIFO batch:31
[ 0.000000] Normal zone: 3360 pages used for memmap
[ 0.000000] Normal zone: 242400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] 4 Processors exceeds NR_CPUS limit of 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bd4a1000 -
00000000bd4a7000
[ 0.000000] PM: Registered nosave memory: 00000000bd5b7000 -
00000000bd60f000
[ 0.000000] PM: Registered nosave memory: 00000000bd6c6000 -
00000000bd6d1000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d1000 -
00000000bd6d4000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d4000 -
00000000bd6d8000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d8000 -
00000000bd6dc000
[ 0.000000] PM: Registered nosave memory: 00000000bd6dc000 -
00000000bd6df000
[ 0.000000] PM: Registered nosave memory: 00000000bd6df000 -
00000000bd706000
[ 0.000000] PM: Registered nosave memory: 00000000bd706000 -
00000000bd708000
[ 0.000000] PM: Registered nosave memory: 00000000bd708000 -
00000000bd90f000
[ 0.000000] PM: Registered nosave memory: 00000000bd90f000 -
00000000bd99f000
[ 0.000000] PM: Registered nosave memory: 00000000bd99f000 -
00000000bd9ff000
[ 0.000000] PM: Registered nosave memory: 00000000bda00000 -
00000000bdc00000
[ 0.000000] PM: Registered nosave memory: 00000000bdc00000 -
00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 -
00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 -
00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 -
00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 -
00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 -
00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 -
00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 -
00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 -
00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000ff800000
[ 0.000000] PM: Registered nosave memory: 00000000ff800000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap:
c0000000:20000000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88013bc00000 s69760 r8192
d24448 u1048576
[ 0.000000] pcpu-alloc: s69760 r8192 d24448 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1003730
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0
root=/dev/mapper/lrootfs ro resume=/dev/sda2 panic=60 reboot=acpi
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3950216k/5177344k available (4134k kernel code,
1091620k absent, 135508k reserved, 4577k data, 568k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:320
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2527.349 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5054.69 BogoMIPS (lpj=10109396)
[ 0.004118] pid_max: default: 32768 minimum: 301
[ 0.004202] Security Framework initialized
[ 0.008117] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.010257] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.011269] Mount-cache hash table entries: 256
[ 0.011491] Initializing cgroup subsys cpuacct
[ 0.011553] Initializing cgroup subsys memory
[ 0.011616] Initializing cgroup subsys devices
[ 0.011672] Initializing cgroup subsys freezer
[ 0.011727] Initializing cgroup subsys perf_event
[ 0.011811] Disabled fast string operations
[ 0.011868] CPU: Physical Processor ID: 0
[ 0.011922] CPU: Processor Core ID: 0
[ 0.011976] mce: CPU supports 6 MCE banks
[ 0.012015] CPU0: Thermal monitoring enabled (TM2)
[ 0.012073] using mwait in idle threads.
[ 0.012146] ACPI: Core revision 20110413
[ 0.020415] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062716] CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping
06
[ 0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.068003] ... version: 2
[ 0.068003] ... bit width: 40
[ 0.068003] ... generic registers: 2
[ 0.068003] ... value mask: 000000ffffffffff
[ 0.068003] ... max period: 000000007fffffff
[ 0.068003] ... fixed-purpose events: 3
[ 0.068003] ... event mask: 0000000700000003
[ 0.092019] Booting Node 0, Processors #1 Ok.
[ 0.092117] smpboot cpu 1: start_ip = 99000
[ 0.008000] Disabled fast string operations
[ 0.184027] Brought up 2 CPUs
[ 0.184139] Total of 2 processors activated (10108.65 BogoMIPS).
[ 0.185759] devtmpfs: initialized
[ 0.185759] PM: Registering ACPI NVS region at bd6c6000 (45056 bytes)
[ 0.185759] PM: Registering ACPI NVS region at bd6d8000 (16384 bytes)
[ 0.185759] PM: Registering ACPI NVS region at bd6df000 (159744 bytes)
[ 0.185759] PM: Registering ACPI NVS region at bd90f000 (589824 bytes)
[ 0.185759] print_constraints: dummy:
[ 0.185759] NET: Registered protocol family 16
[ 0.185759] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.185759] ACPI: bus type pci registered
[ 0.185759] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.185759] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.197214] PCI: Using configuration type 1 for base access
[ 0.197299] bio: create slab <bio-0> at 0
[ 0.197299] ACPI: Added _OSI(Linux)
[ 0.201700] ACPI: EC: EC description table is found, configuring boot EC
[ 0.207994] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
[ 0.225327] ACPI: SSDT 00000000bd6d6c20 002C8 (v01 PmRef Cpu0Ist 00003000
INTL 20050624)
[ 0.225880] ACPI: Dynamic OEM Table Load:
[ 0.226017] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000
INTL 20050624)
[ 0.226305] ACPI: SSDT 00000000bd6d4020 0087A (v01 PmRef Cpu0Cst 00003001
INTL 20050624)
[ 0.226887] ACPI: Dynamic OEM Table Load:
[ 0.227023] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001
INTL 20050624)
[ 0.252260] ACPI: SSDT 00000000bd6d5ca0 001CF (v01 PmRef ApIst 00003000
INTL 20050624)
[ 0.252827] ACPI: Dynamic OEM Table Load:
[ 0.252963] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000
INTL 20050624)
[ 0.264066] ACPI: SSDT 00000000bd6d5f20 0008D (v01 PmRef ApCst 00003000
INTL 20050624)
[ 0.264616] ACPI: Dynamic OEM Table Load:
[ 0.264753] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000
INTL 20050624)
[ 0.284148] ACPI: Interpreter enabled
[ 0.284205] ACPI: (supports S0 S3 S4 S5)
[ 0.284436] ACPI: Using IOAPIC for interrupt routing
[ 0.296091] ACPI: Power Resource [PUBS] (on)
[ 0.304158] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.308346] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.308386] HEST: Table not found.
[ 0.308442] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.308735] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.308827] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.308827] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.308827] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.308827] pci_root PNP0A08:00: host bridge window [mem
0x000d0000-0x000d3fff]
[ 0.308827] pci_root PNP0A08:00: host bridge window [mem
0x000d4000-0x000d7fff]
[ 0.308827] pci_root PNP0A08:00: host bridge window [mem
0x000d8000-0x000dbfff]
[ 0.308827] pci_root PNP0A08:00: host bridge window [mem
0xc0000000-0xfebfffff]
[ 0.308827] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.308827] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.308827] pci 0000:00:02.0: reg 10: [mem 0xf4400000-0xf47fffff 64bit]
[ 0.308827] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit
pref]
[ 0.308827] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.308827] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.308827] pci 0000:00:02.1: reg 10: [mem 0xf4200000-0xf42fffff 64bit]
[ 0.308827] pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780
[ 0.308827] pci 0000:00:03.0: reg 10: [mem 0xfc226800-0xfc22680f 64bit]
[ 0.308827] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.308827] pci 0000:00:03.0: PME# disabled
[ 0.308827] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200
[ 0.308827] pci 0000:00:19.0: reg 10: [mem 0xfc000000-0xfc01ffff]
[ 0.308832] pci 0000:00:19.0: reg 14: [mem 0xfc025000-0xfc025fff]
[ 0.308843] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
[ 0.308910] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.308914] pci 0000:00:19.0: PME# disabled
[ 0.308938] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.308993] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
[ 0.309049] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.309103] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
[ 0.309160] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.309215] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf]
[ 0.309282] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.309306] pci 0000:00:1a.7: reg 10: [mem 0xfc226c00-0xfc226fff]
[ 0.309393] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.309398] pci 0000:00:1a.7: PME# disabled
[ 0.309428] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.309448] pci 0000:00:1b.0: reg 10: [mem 0xfc020000-0xfc023fff 64bit]
[ 0.309523] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.309528] pci 0000:00:1b.0: PME# disabled
[ 0.309556] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.309634] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.309638] pci 0000:00:1c.0: PME# disabled
[ 0.309667] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.309745] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.309749] pci 0000:00:1c.1: PME# disabled
[ 0.309779] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.309857] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.309861] pci 0000:00:1c.3: PME# disabled
[ 0.309890] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 0.309968] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.309973] pci 0000:00:1c.4: PME# disabled
[ 0.310006] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.310061] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df]
[ 0.310117] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.310172] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff]
[ 0.310229] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.312073] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f]
[ 0.312142] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.312166] pci 0000:00:1d.7: reg 10: [mem 0xfc227000-0xfc2273ff]
[ 0.312253] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.312259] pci 0000:00:1d.7: PME# disabled
[ 0.312285] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.312364] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.312515] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.312542] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f]
[ 0.312553] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f]
[ 0.312564] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47]
[ 0.312575] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b]
[ 0.312585] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
[ 0.312596] pci 0000:00:1f.2: reg 24: [mem 0xfc226000-0xfc2267ff]
[ 0.312645] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.312649] pci 0000:00:1f.2: PME# disabled
[ 0.312672] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.312693] pci 0000:00:1f.3: reg 10: [mem 0xfc227400-0xfc2274ff 64bit]
[ 0.312722] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
[ 0.312811] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.312872] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000]
(disabled)
[ 0.312876] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff]
(disabled)
[ 0.312884] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 0.313001] pci 0000:03:00.0: [8086:423b] type 0 class 0x000280
[ 0.313044] pci 0000:03:00.0: reg 10: [mem 0xf4300000-0xf4301fff 64bit]
[ 0.313206] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.313217] pci 0000:03:00.0: PME# disabled
[ 0.313280] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.313341] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000]
(disabled)
[ 0.313345] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff]
[ 0.313352] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 0.313408] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.313469] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.313473] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.313480] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff
64bit pref]
[ 0.313536] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.313596] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.313601] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.313608] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff
64bit pref]
[ 0.313653] pci 0000:15:00.0: [1180:0476] type 2 class 0x000607
[ 0.313677] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled
(via cardbus function)
[ 0.313748] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI
controller
[ 0.313835] pci 0000:15:00.0: reg 10: [mem 0xf4800000-0xf4800fff]
[ 0.313862] pci 0000:15:00.0: supports D1 D2
[ 0.313864] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.313870] pci 0000:15:00.0: PME# disabled
[ 0.313894] pci 0000:15:00.1: [1180:0832] type 0 class 0x000c00
[ 0.313919] pci 0000:15:00.1: reg 10: [mem 0xf4801000-0xf48017ff]
[ 0.314019] pci 0000:15:00.1: supports D1 D2
[ 0.314021] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.314026] pci 0000:15:00.1: PME# disabled
[ 0.314051] pci 0000:15:00.2: [1180:0822] type 0 class 0x000805
[ 0.314075] pci 0000:15:00.2: reg 10: [mem 0xf4801800-0xf48018ff]
[ 0.314175] pci 0000:15:00.2: supports D1 D2
[ 0.314177] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.314182] pci 0000:15:00.2: PME# disabled
[ 0.314210] pci 0000:15:00.4: [1180:0592] type 0 class 0x000880
[ 0.314235] pci 0000:15:00.4: reg 10: [mem 0xf4802000-0xf48020ff]
[ 0.314334] pci 0000:15:00.4: supports D1 D2
[ 0.314336] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.314341] pci 0000:15:00.4: PME# disabled
[ 0.314366] pci 0000:15:00.5: [1180:0852] type 0 class 0x000880
[ 0.314391] pci 0000:15:00.5: reg 10: [mem 0xf4802400-0xf48024ff]
[ 0.314490] pci 0000:15:00.5: supports D1 D2
[ 0.314492] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.314497] pci 0000:15:00.5: PME# disabled
[ 0.314568] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive
decode)
[ 0.314631] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
[ 0.314636] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff]
[ 0.314643] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff
64bit pref]
[ 0.314645] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.314648] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.314650] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 0.314652] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff]
(subtractive decode)
[ 0.314655] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff]
(subtractive decode)
[ 0.314657] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff]
(subtractive decode)
[ 0.314659] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff]
(subtractive decode)
[ 0.314740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.314850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.314881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.314912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.314944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.314975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.315230] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.315636] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.320095] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.320602] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.321119] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.321636] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.322154] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.322671] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.323193] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.324372] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.324863] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.324863] vgaarb: loaded
[ 0.324863] vgaarb: bridge control possible 0000:00:02.0
[ 0.324863] PCI: Using ACPI for IRQ routing
[ 0.326357] PCI: pci_cache_line_size set to 64 bytes
[ 0.326474] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.326476] reserve RAM buffer: 00000000bd4a1000 - 00000000bfffffff
[ 0.326480] reserve RAM buffer: 00000000bd5b7000 - 00000000bfffffff
[ 0.326484] reserve RAM buffer: 00000000bd6c6000 - 00000000bfffffff
[ 0.326488] reserve RAM buffer: 00000000bda00000 - 00000000bfffffff
[ 0.328033] NetLabel: Initializing
[ 0.328088] NetLabel: domain hash size = 128
[ 0.328144] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.328210] NetLabel: unlabeled traffic allowed by default
[ 0.328273] HPET: 4 timers in total, 0 timers will be used for per-cpu
timer
[ 0.328337] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.328595] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.336086] Switching to clocksource hpet
[ 0.337506] pnp: PnP ACPI init
[ 0.337515] ACPI: bus type pnp registered
[ 0.357722] Switched to NOHz mode on CPU #1
[ 0.357723] Switched to NOHz mode on CPU #0
[ 0.357821] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.357823] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.357824] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.357826] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.357827] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.357829] pnp 00:00: [mem 0x000d0000-0x000cffff disabled]
[ 0.357831] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.357832] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.357834] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.357836] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.357838] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.357840] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.357842] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.357844] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.357846] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.357848] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.357849] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.357934] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.357995] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.358056] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.358116] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.358176] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.358237] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.358297] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.358358] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.358418] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.358479] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.358539] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.358600] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.358660] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.358721] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.358782] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.358800] pnp 00:01: [bus 00-ff]
[ 0.358802] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.358804] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.358806] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.358808] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.358810] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.358812] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.358814] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.358816] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.358818] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.358820] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.358822] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.358824] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.358826] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.358828] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.358830] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.358833] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.358835] pnp 00:01: [mem 0xc0000000-0xfebfffff window]
[ 0.358837] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
[ 0.358909] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 0.378800] pnp 00:02: [io 0x0010-0x001f]
[ 0.378802] pnp 00:02: [io 0x0090-0x009f]
[ 0.378804] pnp 00:02: [io 0x0024-0x0025]
[ 0.378805] pnp 00:02: [io 0x0028-0x0029]
[ 0.378807] pnp 00:02: [io 0x002c-0x002d]
[ 0.378809] pnp 00:02: [io 0x0030-0x0031]
[ 0.378810] pnp 00:02: [io 0x0034-0x0035]
[ 0.378812] pnp 00:02: [io 0x0038-0x0039]
[ 0.378813] pnp 00:02: [io 0x003c-0x003d]
[ 0.378815] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.378816] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.378818] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.378820] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.378821] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.378823] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.378824] pnp 00:02: [io 0x0050-0x0053]
[ 0.378826] pnp 00:02: [io 0x0072-0x0077]
[ 0.378827] pnp 00:02: [io 0x002e-0x002f]
[ 0.378829] pnp 00:02: [io 0x1000-0x107f]
[ 0.378831] pnp 00:02: [io 0x1180-0x11ff]
[ 0.378832] pnp 00:02: [io 0x0800-0x080f]
[ 0.378834] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.378835] pnp 00:02: [io 0x1600-0x167f]
[ 0.378837] pnp 00:02: [io 0x1680-0x169f]
[ 0.378839] pnp 00:02: [mem 0xe0000000-0xefffffff]
[ 0.378841] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.378842] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 0.378844] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.378846] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.378848] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.378944] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.379004] system 00:02: [io 0x1180-0x11ff] has been reserved
[ 0.379065] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.379124] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.379183] system 00:02: [io 0x1600-0x167f] has been reserved
[ 0.379242] system 00:02: [io 0x1680-0x169f] has been reserved
[ 0.379302] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.379362] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.379422] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.379483] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.379543] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.379603] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.379663] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.379699] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.379751] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.379761] pnp 00:04: [io 0x0000-0x000f]
[ 0.379763] pnp 00:04: [io 0x0080-0x008f]
[ 0.379765] pnp 00:04: [io 0x00c0-0x00df]
[ 0.379766] pnp 00:04: [dma 4]
[ 0.379817] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.379826] pnp 00:05: [io 0x0061]
[ 0.379876] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.379885] pnp 00:06: [io 0x00f0]
[ 0.379892] pnp 00:06: [irq 13]
[ 0.379942] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.379951] pnp 00:07: [io 0x0070-0x0071]
[ 0.379959] pnp 00:07: [irq 8]
[ 0.380031] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.380041] pnp 00:08: [io 0x0060]
[ 0.380042] pnp 00:08: [io 0x0064]
[ 0.380047] pnp 00:08: [irq 1]
[ 0.380098] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.380110] pnp 00:09: [irq 12]
[ 0.380162] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13
(active)
[ 0.400086] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.400157] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.400645] pnp: PnP ACPI: found 11 devices
[ 0.400701] ACPI: ACPI bus type pnp unregistered
[ 0.409092] PCI: max bus depth: 2 pci_try_num: 3
[ 0.409145] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff
64bit pref]
[ 0.409218] pci 0000:00:1c.1: BAR 13: assigned [io 0x8000-0x8fff]
[ 0.409279] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0200000-0xc03fffff]
[ 0.409341] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0400000-0xc05fffff
64bit pref]
[ 0.409413] pci 0000:00:1c.0: BAR 13: assigned [io 0x9000-0x9fff]
[ 0.409473] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.409532] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.409595] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.409658] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc05fffff
64bit pref]
[ 0.409734] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.409793] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff]
[ 0.409855] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff]
[ 0.409918] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff
64bit pref]
[ 0.409994] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.410053] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.410115] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.410178] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff
64bit pref]
[ 0.410254] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.410313] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.410376] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.410438] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff
64bit pref]
[ 0.410515] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff
pref]
[ 0.410588] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[ 0.410648] pci 0000:15:00.0: BAR 13: assigned [io 0x4000-0x40ff]
[ 0.410708] pci 0000:15:00.0: BAR 14: assigned [io 0x4400-0x44ff]
[ 0.410767] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.410825] pci 0000:15:00.0: bridge window [io 0x4000-0x40ff]
[ 0.410887] pci 0000:15:00.0: bridge window [io 0x4400-0x44ff]
[ 0.410950] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff
pref]
[ 0.411023] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
[ 0.411086] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.411145] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
[ 0.411208] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff]
[ 0.411271] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff
64bit pref]
[ 0.411355] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.413233] pci 0000:00:1c.0: setting latency timer to 64
[ 0.413242] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.413305] pci 0000:00:1c.1: setting latency timer to 64
[ 0.413313] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.413375] pci 0000:00:1c.3: setting latency timer to 64
[ 0.413382] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.413444] pci 0000:00:1c.4: setting latency timer to 64
[ 0.413452] pci 0000:00:1e.0: setting latency timer to 64
[ 0.413461] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.413525] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.413527] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.413529] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.413532] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.413534] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.413536] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.413538] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.413540] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.413542] pci_bus 0000:02: resource 1 [mem 0xc0200000-0xc03fffff]
[ 0.413544] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc05fffff 64bit
pref]
[ 0.413547] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
[ 0.413549] pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff]
[ 0.413551] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc01fffff 64bit
pref]
[ 0.413553] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.413555] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.413557] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit
pref]
[ 0.413560] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.413562] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.413564] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit
pref]
[ 0.413566] pci_bus 0000:15: resource 0 [io 0x4000-0x7fff]
[ 0.413568] pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff]
[ 0.413570] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit
pref]
[ 0.413572] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
[ 0.413574] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
[ 0.413576] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.413579] pci_bus 0000:15: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.413581] pci_bus 0000:15: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.413583] pci_bus 0000:15: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.413585] pci_bus 0000:15: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.413587] pci_bus 0000:16: resource 0 [io 0x4000-0x40ff]
[ 0.413589] pci_bus 0000:16: resource 1 [io 0x4400-0x44ff]
[ 0.413591] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[ 0.413593] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
[ 0.413627] NET: Registered protocol family 2
[ 0.413805] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.415073] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[ 0.418309] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.418833] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.418893] TCP reno registered
[ 0.418955] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.419049] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.419266] NET: Registered protocol family 1
[ 0.419340] pci 0000:00:02.0: Boot video device
[ 0.419355] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.419357] pci 0000:00:1a.0: Performing full reset
[ 0.419377] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.419379] pci 0000:00:1a.1: Performing full reset
[ 0.419398] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.419400] pci 0000:00:1a.2: Performing full reset
[ 0.419464] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.419466] pci 0000:00:1d.0: Performing full reset
[ 0.419485] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.419487] pci 0000:00:1d.1: Performing full reset
[ 0.419507] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.419508] pci 0000:00:1d.2: Performing full reset
[ 0.419578] PCI: CLS 64 bytes, default 64
[ 0.419630] Trying to unpack rootfs image as initramfs...
[ 0.421827] rootfs image is not initramfs (no cpio magic); looks like an
initrd
[ 0.423209] Freeing initrd memory: 1280k freed
[ 0.423485] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.423545] Placing 64MB software IO TLB between ffff8800b94a1000 -
ffff8800bd4a1000
[ 0.423616] software IO TLB at phys 0xb94a1000 - 0xbd4a1000
[ 0.423688] Simple Boot Flag at 0x35 set to 0x1
[ 0.424657] audit: initializing netlink socket (disabled)
[ 0.424724] type=2000 audit(1309380898.420:1): initialized
[ 0.435638] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.458418] VFS: Disk quotas dquot_6.5.2
[ 0.458570] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.458737] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.458853] msgmni has been set to 7717
[ 0.459249] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.459321] io scheduler noop registered
[ 0.459377] io scheduler deadline registered (default)
[ 0.459575] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.459626] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.459822] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.459870] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.460109] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.460157] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.460349] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.460397] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.460666] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.460730] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.460750] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.460811] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.460873] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.460893] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.460956] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.460976] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.461038] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.461162] intel_idle: MWAIT substates: 0x3122220
[ 0.461164] intel_idle: does not run on family 6 model 23
[ 0.461246] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.461495] ACPI: Lid Switch [LID]
[ 0.461622] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.461696] ACPI: Sleep Button [SLPB]
[ 0.461839] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.461910] ACPI: Power Button [PWRF]
[ 0.462010] ERST: Table is not found!
[ 0.492976] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.592429] Linux agpgart interface v0.103
[ 0.592635] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.592819] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total,
262144K mappable
[ 0.594593] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.594859] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.595032] [drm] Initialized drm 1.1.0 20060810
[ 0.595133] [drm] radeon defaulting to userspace modesetting.
[ 0.596266] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.596327] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.596390] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.596452] i915 0000:00:02.0: setting latency timer to 64
[ 0.654698] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 0.654703] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.654765] [drm] Driver supports precise vblank timestamp query.
[ 0.654867] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.010422] fbcon: inteldrmfb (fb0) is primary device
[ 1.060795] Console: switching to colour frame buffer device 180x56
[ 1.064470] fb0: inteldrmfb frame buffer device
[ 1.064494] drm: registered panic notifier
[ 1.165732] acpi device:02: registered as cooling_device0
[ 1.165881] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.165932] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.166037] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor
0
[ 1.168150] brd: module loaded
[ 1.168280] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
0x60,0x64 irq 1,12
[ 1.177442] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.177496] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.177725] mousedev: PS/2 mouse device common for all mice
[ 1.177820] rtc_cmos 00:07: RTC can wake from S4
[ 1.177982] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.178042] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.178120] cpuidle: using governor ladder
[ 1.178144] cpuidle: using governor menu
[ 1.178379] TCP cubic registered
[ 1.178400] NET: Registered protocol family 17
[ 1.182844] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
[ 1.189106] registered taskstats version 1
[ 1.199162] rtc_cmos 00:07: setting system clock to 2011-06-29 20:55:00 UTC
(1309380900)
[ 1.199366] RAMDISK: lzo image found at block 0
[ 1.214960] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
[ 1.220628] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised:
[email protected]
[ 1.223237] Intel AES-NI instructions are not detected.
[ 1.236585] SCSI subsystem initialized
[ 1.240970] libata version 3.00 loaded.
[ 1.242087] ahci 0000:00:1f.2: version 3.0
[ 1.242103] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.243578] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.243619] ahci: SSS flag set, parallel bus scan disabled
[ 1.245070] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3
impl SATA mode
[ 1.246519] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio
slum part ccc sxs
[ 1.247960] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.248790] scsi0 : ahci
[ 1.250343] scsi1 : ahci
[ 1.251858] scsi2 : ahci
[ 1.253378] scsi3 : ahci
[ 1.255065] ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100
irq 45
[ 1.256477] ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180
irq 45
[ 1.257835] ata3: DUMMY
[ 1.259178] ata4: DUMMY
[ 1.420017] Refined TSC clocksource calibration: 2526.999 MHz.
[ 1.421384] Switching to clocksource tsc
[ 1.580018] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.592090] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.592093] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 1.593474] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 1.601143] ata1.00: ATA-8: OCZ-VERTEX2, 1.32, max UDMA/133
[ 1.602510] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.611142] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.611145] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 1.612532] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 1.621144] ata1.00: configured for UDMA/133
[ 1.622624] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.32
PQ: 0 ANSI: 5
[ 1.944016] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.947876] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.948966] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.948970] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 1.951435] ata2.00: ATAPI: Optiarc DVD RW AD-7910S, 1.D0, max UDMA/100
[ 1.955830] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.956911] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.956914] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 1.959377] ata2.00: configured for UDMA/100
[ 1.963094] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7910S 1.D0
PQ: 0 ANSI: 5
[ 1.965748] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240
GB/223 GiB)
[ 1.967669] sd 0:0:0:0: [sda] Write Protect is off
[ 1.969094] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.969113] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.971224] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.973151] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.993735] SGI XFS with ACLs, security attributes, large block/inode
numbers, no debug enabled
[ 1.995833] SGI XFS Quota Management subsystem
[ 6.460357] XFS (dm-0): Mounting Filesystem
[ 6.512395] XFS (dm-0): Ending clean mount
[ 6.513899] VFS: Mounted root (xfs filesystem) readonly on device 254:0.
[ 6.515390] Trying to move old root to /initrd ... okay
[ 6.517489] devtmpfs: mounted
[ 6.519899] Freeing unused kernel memory: 568k freed
[ 6.521553] Write protecting the kernel read-only data: 8192k
[ 6.529276] Freeing unused kernel memory: 1988k freed
[ 6.532266] Freeing unused kernel memory: 280k freed
[ 6.849859] usbcore: registered new interface driver usbfs
[ 6.849907] usbcore: registered new interface driver hub
[ 6.855001] usbcore: registered new device driver usb
[ 6.855060] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 6.855062] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 6.855093] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 6.855107] e1000e 0000:00:19.0: setting latency timer to 64
[ 6.855245] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 6.857658] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.857661] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 6.861648] iTCO_vendor_support: vendor-support=0
[ 6.866049] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.866153] iTCO_wdt: Found a ICH9M-E TCO device (Version=2,
TCOBASE=0x1060)
[ 6.866307] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.875510] ACPI: acpi_idle registered with cpuidle
[ 6.880382] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.904369] Monitor-Mwait will be used to enter C-1 state
[ 6.905914] Monitor-Mwait will be used to enter C-2 state
[ 6.907374] Monitor-Mwait will be used to enter C-3 state
[ 6.907442] Marking TSC unstable due to TSC halts in idle
[ 6.908281] Switching to clocksource hpet
[ 6.919126] cfg80211: Calling CRDA to update world regulatory domain
[ 6.923014] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
[ 6.927809] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.927812] ACPI: Thermal Zone [THM0] (50 C)
[ 6.941581] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-
tree:d
[ 6.941584] iwlagn: Copyright(c) 2003-2011 Intel Corporation
[ 6.941947] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.941957] iwlagn 0000:03:00.0: setting latency timer to 64
[ 6.941988] iwlagn 0000:03:00.0: Detected Intel(R) WiMAX/WiFi Link 5350
AGN, REV=0x24
[ 6.944413] wmi: Mapper loaded
[ 6.945243] thermal LNXTHERM:01: registered as thermal_zone1
[ 6.945245] ACPI: Thermal Zone [THM1] (47 C)
[ 6.962046] Non-volatile memory driver v1.3
[ 6.973815] ACPI: Battery Slot [BAT0] (battery present)
[ 6.974378] ACPI: AC Adapter [AC] (on-line)
[ 6.979003] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.003532] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2
cdda tray
[ 7.003536] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.003651] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.027002] iwlagn 0000:03:00.0: device EEPROM VER=0x21e, CALIB=0x4
[ 7.027005] iwlagn 0000:03:00.0: Device SKU: 0Xb
[ 7.027007] iwlagn 0000:03:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
[ 7.027019] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a
channels
[ 7.027526] iwlagn 0000:03:00.0: irq 47 for MSI/MSI-X
[ 7.027759] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 7.027761] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 7.027762] thinkpad_acpi: ThinkPad BIOS 7UET91WW (3.21 ), EC 7VHT16WW-1.06
[ 7.027764] thinkpad_acpi: Lenovo ThinkPad T400, model 2764CTO
[ 7.048369] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 7.048572] thinkpad_acpi: radio switch found; radios are enabled
[ 7.048874] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 7.048878] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[ 7.048884] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window:
[io 0x4000-0x7fff]
[ 7.048887] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window:
[mem 0xf4800000-0xf7ffffff]
[ 7.048890] pcmcia_socket pcmcia_socket0: cs: memory probe
0xf4800000-0xf7ffffff: excluding 0xf4800000-0xf4b7ffff
[ 7.048905] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window:
[mem 0xf0000000-0xf3ffffff 64bit pref]
[ 7.048907] pcmcia_socket pcmcia_socket0: cs: memory probe
0xf0000000-0xf3ffffff: excluding 0xf0000000-0xf3ffffff
[ 7.052372] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is
unblocked
[ 7.059421] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 7.060067] sdhci: Secure Digital Host Controller Interface driver
[ 7.060069] sdhci: Copyright(c) Pierre Ossman
[ 7.061099] firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 7.062885] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.063800] Registered led device: tpacpi::thinklight
[ 7.063836] Registered led device: tpacpi::power
[ 7.063851] Registered led device: tpacpi::standby
[ 7.063867] Registered led device: tpacpi::thinkvantage
[ 7.067144] thinkpad_acpi: Standard ACPI backlight interface available, not
loading native one
[ 7.067223] thinkpad_acpi: Console audio control enabled, mode: override
(read/write)
[ 7.069428] input: ThinkPad Extra Buttons as
/devices/platform/thinkpad_acpi/input/input6
[ 7.072163] tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6)
[ 7.072166] tpm_tis 00:0a: Intel iTPM workaround enabled
[ 7.074678] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1)
00:21:86:a2:19:06
[ 7.074681] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 7.074703] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 7.074723] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 7.074727] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 7.074735] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ
23
[ 7.074756] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 7.074760] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 7.074775] drivers/usb/core/inode.c: creating file 'devices'
[ 7.074778] drivers/usb/core/inode.c: creating file '001'
[ 7.074781] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 7.074792] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3
pcc=2 ordered !ppc ports=6
[ 7.074797] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes
1024 64 bit addr hw prefetch
[ 7.074825] ehci_hcd 0000:00:1a.7: debug port 1
[ 7.074830] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 7.078704] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 7.078706] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 7.078725] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
[ 7.078729] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 7.082608] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1
period=1024 RUN
[ 7.092053] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 7.092098] usb usb1: default language 0x0409
[ 7.092104] usb usb1: udev 1, busnum 1, minor = 0
[ 7.092106] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.092108] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.092110] usb usb1: Product: EHCI Host Controller
[ 7.092112] usb usb1: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f ehci_hcd
[ 7.092114] usb usb1: SerialNumber: 0000:00:1a.7
[ 7.092218] usb usb1: usb_probe_device
[ 7.092220] usb usb1: configuration #1 chosen from 1 choice
[ 7.092228] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 7.092250] hub 1-0:1.0: usb_probe_interface
[ 7.092251] hub 1-0:1.0: usb_probe_interface - got id
[ 7.092254] hub 1-0:1.0: USB hub found
[ 7.092258] hub 1-0:1.0: 6 ports detected
[ 7.092259] hub 1-0:1.0: standalone hub
[ 7.092261] hub 1-0:1.0: no power switching (usb 1.0)
[ 7.092263] hub 1-0:1.0: individual port over-current protection
[ 7.092265] hub 1-0:1.0: power on to power good time: 20ms
[ 7.092268] hub 1-0:1.0: local power source is good
[ 7.092270] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 7.092319] drivers/usb/core/inode.c: creating file '001'
[ 7.092369] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 7.092374] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 7.092386] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ
19
[ 7.092412] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7.092416] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.092421] drivers/usb/core/inode.c: creating file '002'
[ 7.092424] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 7.092433] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3
pcc=2 ordered !ppc ports=6
[ 7.092438] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes
1024 64 bit addr hw prefetch
[ 7.092688] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.092692] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 7.096858] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 7.096860] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 7.096877] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
[ 7.096882] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 7.100766] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1
period=1024 RUN
[ 7.112019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 7.112039] usb usb2: default language 0x0409
[ 7.112045] usb usb2: udev 1, busnum 2, minor = 128
[ 7.112047] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.112049] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.112051] usb usb2: Product: EHCI Host Controller
[ 7.112053] usb usb2: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f ehci_hcd
[ 7.112055] usb usb2: SerialNumber: 0000:00:1d.7
[ 7.112136] usb usb2: usb_probe_device
[ 7.112138] usb usb2: configuration #1 chosen from 1 choice
[ 7.112145] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 7.112171] hub 2-0:1.0: usb_probe_interface
[ 7.112172] hub 2-0:1.0: usb_probe_interface - got id
[ 7.112176] hub 2-0:1.0: USB hub found
[ 7.112180] hub 2-0:1.0: 6 ports detected
[ 7.112182] hub 2-0:1.0: standalone hub
[ 7.112183] hub 2-0:1.0: no power switching (usb 1.0)
[ 7.112185] hub 2-0:1.0: individual port over-current protection
[ 7.112187] hub 2-0:1.0: power on to power good time: 20ms
[ 7.112190] hub 2-0:1.0: local power source is good
[ 7.112192] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 7.112241] drivers/usb/core/inode.c: creating file '001'
[ 7.112423] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 7.112597] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 7.112651] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 7.112679] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.124311] firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI v1.10, 4
IR + 4 IT contexts, quirks 0x1
[ 7.124499] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev
21)
[ 7.124514] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 7.125533] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW
doesn't fully claim to support it.
[ 7.125552] mmc0: no vmmc regulator found
[ 7.126580] Registered led device: mmc0::
[ 7.127621] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
[ 7.139381] Monitor-Mwait will be used to enter C-3 state
[ 7.189149] ALSA sound/pci/hda/hda_codec.c:3771 hda_codec: model 'laptop'
is selected
[ 7.189214] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input7
[ 7.192042] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 7.192059] hub 1-0:1.0: port 1: status 0501 change 0001
[ 7.192073] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 7.192076] hub 1-0:1.0: port 4: status 0501 change 0001
[ 7.192086] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 7.192089] hub 1-0:1.0: port 6: status 0501 change 0001
[ 7.202828] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.202949] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.203012] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.212034] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 7.212039] hub 2-0:1.0: port 4: status 0501 change 0001
[ 7.212504] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.212557] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 7.212560] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 7.212568] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 7.212576] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 7.212580] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 7.212587] drivers/usb/core/inode.c: creating file '003'
[ 7.212592] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 7.212603] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 7.212608] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.212610] uhci_hcd 0000:00:1a.0: Performing full reset
[ 7.212624] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 7.212646] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 7.212684] usb usb3: default language 0x0409
[ 7.212690] usb usb3: udev 1, busnum 3, minor = 256
[ 7.212692] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.212694] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.212696] usb usb3: Product: UHCI Host Controller
[ 7.212698] usb usb3: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.212700] usb usb3: SerialNumber: 0000:00:1a.0
[ 7.212822] usb usb3: usb_probe_device
[ 7.212824] usb usb3: configuration #1 chosen from 1 choice
[ 7.212831] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 7.212853] hub 3-0:1.0: usb_probe_interface
[ 7.212855] hub 3-0:1.0: usb_probe_interface - got id
[ 7.212857] hub 3-0:1.0: USB hub found
[ 7.212861] hub 3-0:1.0: 2 ports detected
[ 7.212863] hub 3-0:1.0: standalone hub
[ 7.212864] hub 3-0:1.0: no power switching (usb 1.0)
[ 7.212866] hub 3-0:1.0: individual port over-current protection
[ 7.212868] hub 3-0:1.0: power on to power good time: 2ms
[ 7.212871] hub 3-0:1.0: local power source is good
[ 7.212873] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 7.212911] drivers/usb/core/inode.c: creating file '001'
[ 7.212942] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
[ 7.212968] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[ 7.212974] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 7.212977] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 7.212982] drivers/usb/core/inode.c: creating file '004'
[ 7.212985] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 7.212994] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 7.212998] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.213000] uhci_hcd 0000:00:1a.1: Performing full reset
[ 7.213028] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 7.213066] usb usb4: default language 0x0409
[ 7.213071] usb usb4: udev 1, busnum 4, minor = 384
[ 7.213073] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.213075] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.213077] usb usb4: Product: UHCI Host Controller
[ 7.213079] usb usb4: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.213080] usb usb4: SerialNumber: 0000:00:1a.1
[ 7.213143] usb usb4: usb_probe_device
[ 7.213145] usb usb4: configuration #1 chosen from 1 choice
[ 7.213151] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 7.250039] hub 4-0:1.0: usb_probe_interface
[ 7.250042] hub 4-0:1.0: usb_probe_interface - got id
[ 7.250045] hub 4-0:1.0: USB hub found
[ 7.250052] hub 4-0:1.0: 2 ports detected
[ 7.250054] hub 4-0:1.0: standalone hub
[ 7.250055] hub 4-0:1.0: no power switching (usb 1.0)
[ 7.250057] hub 4-0:1.0: individual port over-current protection
[ 7.250059] hub 4-0:1.0: power on to power good time: 2ms
[ 7.250062] hub 4-0:1.0: local power source is good
[ 7.250064] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 7.250110] drivers/usb/core/inode.c: creating file '001'
[ 7.250147] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
[ 7.250177] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 7.250179] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 7.250192] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ
22
[ 7.250201] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 7.250205] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 7.250212] drivers/usb/core/inode.c: creating file '005'
[ 7.250217] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
number 5
[ 7.250228] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 7.250233] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.250235] uhci_hcd 0000:00:1a.2: Performing full reset
[ 7.250250] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 7.250271] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 7.250310] usb usb5: default language 0x0409
[ 7.250316] usb usb5: udev 1, busnum 5, minor = 512
[ 7.250318] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.250320] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.250323] usb usb5: Product: UHCI Host Controller
[ 7.250324] usb usb5: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.250326] usb usb5: SerialNumber: 0000:00:1a.2
[ 7.250452] usb usb5: usb_probe_device
[ 7.250455] usb usb5: configuration #1 chosen from 1 choice
[ 7.250462] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 7.250482] hub 5-0:1.0: usb_probe_interface
[ 7.250483] hub 5-0:1.0: usb_probe_interface - got id
[ 7.250485] hub 5-0:1.0: USB hub found
[ 7.250489] hub 5-0:1.0: 2 ports detected
[ 7.250491] hub 5-0:1.0: standalone hub
[ 7.250492] hub 5-0:1.0: no power switching (usb 1.0)
[ 7.250494] hub 5-0:1.0: individual port over-current protection
[ 7.250495] hub 5-0:1.0: power on to power good time: 2ms
[ 7.250499] hub 5-0:1.0: local power source is good
[ 7.250501] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 7.250544] drivers/usb/core/inode.c: creating file '001'
[ 7.250574] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
[ 7.250594] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 7.250596] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 7.250601] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 7.250608] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7.250611] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.250616] drivers/usb/core/inode.c: creating file '006'
[ 7.250620] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 6
[ 7.250629] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 7.250633] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.250635] uhci_hcd 0000:00:1d.0: Performing full reset
[ 7.250650] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 7.250655] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 7.250689] usb usb6: default language 0x0409
[ 7.250695] usb usb6: udev 1, busnum 6, minor = 640
[ 7.250697] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.250699] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.250701] usb usb6: Product: UHCI Host Controller
[ 7.250702] usb usb6: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.250704] usb usb6: SerialNumber: 0000:00:1d.0
[ 7.250767] usb usb6: usb_probe_device
[ 7.250770] usb usb6: configuration #1 chosen from 1 choice
[ 7.250775] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 7.250794] hub 6-0:1.0: usb_probe_interface
[ 7.250796] hub 6-0:1.0: usb_probe_interface - got id
[ 7.250798] hub 6-0:1.0: USB hub found
[ 7.250802] hub 6-0:1.0: 2 ports detected
[ 7.250803] hub 6-0:1.0: standalone hub
[ 7.250805] hub 6-0:1.0: no power switching (usb 1.0)
[ 7.250806] hub 6-0:1.0: individual port over-current protection
[ 7.250808] hub 6-0:1.0: power on to power good time: 2ms
[ 7.255547] hub 6-0:1.0: local power source is good
[ 7.255550] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 7.255599] drivers/usb/core/inode.c: creating file '001'
[ 7.255640] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 7.255663] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 7.255672] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7.255675] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.255680] drivers/usb/core/inode.c: creating file '007'
[ 7.255687] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 7
[ 7.255696] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 7.255700] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.255702] uhci_hcd 0000:00:1d.1: Performing full reset
[ 7.255721] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 7.255757] usb usb7: default language 0x0409
[ 7.255762] usb usb7: udev 1, busnum 7, minor = 768
[ 7.255764] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.255767] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.255769] usb usb7: Product: UHCI Host Controller
[ 7.255770] usb usb7: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.255772] usb usb7: SerialNumber: 0000:00:1d.1
[ 7.263268] usb usb7: usb_probe_device
[ 7.263272] usb usb7: configuration #1 chosen from 1 choice
[ 7.263283] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 7.263420] hub 7-0:1.0: usb_probe_interface
[ 7.263422] hub 7-0:1.0: usb_probe_interface - got id
[ 7.263425] hub 7-0:1.0: USB hub found
[ 7.263430] hub 7-0:1.0: 2 ports detected
[ 7.263431] hub 7-0:1.0: standalone hub
[ 7.263432] hub 7-0:1.0: no power switching (usb 1.0)
[ 7.263434] hub 7-0:1.0: individual port over-current protection
[ 7.263436] hub 7-0:1.0: power on to power good time: 2ms
[ 7.263439] hub 7-0:1.0: local power source is good
[ 7.263440] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 7.263500] drivers/usb/core/inode.c: creating file '001'
[ 7.263544] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 7.263570] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 7.263579] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7.263582] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.263587] drivers/usb/core/inode.c: creating file '008'
[ 7.263682] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 8
[ 7.263691] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 7.263696] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.263698] uhci_hcd 0000:00:1d.2: Performing full reset
[ 7.263722] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 7.263761] usb usb8: default language 0x0409
[ 7.263767] usb usb8: udev 1, busnum 8, minor = 896
[ 7.263769] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.263771] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.263772] usb usb8: Product: UHCI Host Controller
[ 7.263774] usb usb8: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.263775] usb usb8: SerialNumber: 0000:00:1d.2
[ 7.264388] usb usb8: usb_probe_device
[ 7.264390] usb usb8: configuration #1 chosen from 1 choice
[ 7.264396] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 7.264442] hub 8-0:1.0: usb_probe_interface
[ 7.264444] hub 8-0:1.0: usb_probe_interface - got id
[ 7.264446] hub 8-0:1.0: USB hub found
[ 7.264449] hub 8-0:1.0: 2 ports detected
[ 7.264451] hub 8-0:1.0: standalone hub
[ 7.264452] hub 8-0:1.0: no power switching (usb 1.0)
[ 7.264453] hub 8-0:1.0: individual port over-current protection
[ 7.264455] hub 8-0:1.0: power on to power good time: 2ms
[ 7.264458] hub 8-0:1.0: local power source is good
[ 7.264459] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 7.264525] drivers/usb/core/inode.c: creating file '001'
[ 7.264977] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 7.302029] hub 1-0:1.0: state 7 ports 6 chg 0052 evt 0000
[ 7.302039] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 7.313470] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00
[ 7.317291] iwlagn 0000:03:00.0: loaded firmware version 8.83.5.1 build
33692
[ 7.317667] Registered led device: phy0-led
[ 7.331286] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 7.348148] uhci_hcd 0000:00:1a.1: port 2 portsc 0082,00
[ 7.348170] uhci_hcd 0000:00:1a.2: port 2 portsc 0082,00
[ 7.352374] udevd[1440]: renamed network interface wlan0 to eth1
[ 7.356262] ehci_hcd 0000:00:1a.7: port 1 full speed --> companion
[ 7.356648] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003801 0 ACK
POWER OWNER sig=j CONNECT
[ 7.356674] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
[ 7.367725] uhci_hcd 0000:00:1d.1: port 2 portsc 0082,00
[ 7.416098] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0 ACK
POWER OWNER sig=se0 CSC
[ 7.416131] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 7.472263] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion
[ 7.472268] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003801 0 ACK
POWER OWNER sig=j CONNECT
[ 7.472272] hub 1-0:1.0: port 4 not reset yet, waiting 50ms
[ 7.528056] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK
POWER OWNER sig=se0 CSC
[ 7.528078] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 7.584259] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 7.584263] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 7.624176] firewire_core: created device fw0: GUID 00061b032a347baa, S400
[ 7.640056] usb 1-6: new high speed USB device number 4 using ehci_hcd
[ 7.696260] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 7.696264] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 7.750156] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps:
0xd04791/0xb00000/0x20000
[ 7.750161] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 7.779796] usb 1-6: skipped 1 descriptor after configuration
[ 7.779799] usb 1-6: skipped 5 descriptors after interface
[ 7.779802] usb 1-6: skipped 1 descriptor after endpoint
[ 7.779804] usb 1-6: skipped 9 descriptors after interface
[ 7.780168] usb 1-6: default language 0x0409
[ 7.784041] usb 1-6: udev 4, busnum 1, minor = 3
[ 7.784043] usb 1-6: New USB device found, idVendor=17ef, idProduct=1004
[ 7.784045] usb 1-6: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
[ 7.784047] usb 1-6: Product: Integrated Camera
[ 7.784049] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd.
[ 7.784051] usb 1-6: SerialNumber: SN0001
[ 7.784123] usb 1-6: usb_probe_device
[ 7.784126] usb 1-6: configuration #1 chosen from 1 choice
[ 7.784419] usb 1-6: adding 1-6:1.0 (config #1, interface 0)
[ 7.785691] usb 1-6: adding 1-6:1.1 (config #1, interface 1)
[ 7.785740] drivers/usb/core/inode.c: creating file '004'
[ 7.785758] hub 2-0:1.0: state 7 ports 6 chg 0010 evt 0000
[ 7.785765] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 7.789822] Linux media interface: v0.10
[ 7.794152] Linux video capture interface: v2.00
[ 7.794856] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input11
[ 7.797003] uvcvideo 1-6:1.0: usb_probe_interface
[ 7.797006] uvcvideo 1-6:1.0: usb_probe_interface - got id
[ 7.797028] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004)
[ 7.833766] input: Integrated Camera as
/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input12
[ 7.833831] usbcore: registered new interface driver uvcvideo
[ 7.833833] USB Video Class driver (v1.1.0)
[ 7.835196] usb 1-6: link qh4-0001/ffff880133fd5f00 start 1 [1/0 us]
[ 7.835235] usb 1-6: unlink qh4-0001/ffff880133fd5f00 start 1 [1/0 us]
[ 7.840293] ehci_hcd 0000:00:1d.7: port 4 high speed
[ 7.840297] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 7.896068] usb 2-4: new high speed USB device number 2 using ehci_hcd
[ 7.956293] ehci_hcd 0000:00:1d.7: port 4 high speed
[ 7.956297] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 8.093838] usb 2-4: skipped 3 descriptors after interface
[ 8.093842] usb 2-4: skipped 4 descriptors after interface
[ 8.093845] usb 2-4: skipped 4 descriptors after interface
[ 8.093847] usb 2-4: skipped 2 descriptors after interface
[ 8.093850] usb 2-4: skipped 2 descriptors after interface
[ 8.093852] usb 2-4: skipped 5 descriptors after interface
[ 8.093855] usb 2-4: skipped 4 descriptors after interface
[ 8.102586] usb 2-4: skipped 3 descriptors after interface
[ 8.102588] usb 2-4: skipped 4 descriptors after interface
[ 8.102590] usb 2-4: skipped 4 descriptors after interface
[ 8.102593] usb 2-4: skipped 2 descriptors after interface
[ 8.102595] usb 2-4: skipped 2 descriptors after interface
[ 8.102598] usb 2-4: skipped 5 descriptors after interface
[ 8.102701] usb 2-4: default language 0x0409
[ 8.106833] usb 2-4: udev 2, busnum 2, minor = 129
[ 8.106836] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
[ 8.106838] usb 2-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 8.106840] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard
Composite Device
[ 8.106842] usb 2-4: Manufacturer: Ericsson
[ 8.106844] usb 2-4: SerialNumber: 3541430228088360
[ 8.106968] usb 2-4: usb_probe_device
[ 8.106971] usb 2-4: configuration #1 chosen from 2 choices
[ 8.109696] usb 2-4: adding 2-4:1.0 (config #1, interface 0)
[ 8.109943] usb 2-4: adding 2-4:1.1 (config #1, interface 1)
[ 8.129231] usb 2-4: adding 2-4:1.2 (config #1, interface 2)
[ 8.131618] usb 2-4: adding 2-4:1.3 (config #1, interface 3)
[ 8.133737] usb 2-4: adding 2-4:1.4 (config #1, interface 4)
[ 8.135730] usb 2-4: adding 2-4:1.5 (config #1, interface 5)
[ 8.137730] usb 2-4: adding 2-4:1.6 (config #1, interface 6)
[ 8.139720] usb 2-4: adding 2-4:1.7 (config #1, interface 7)
[ 8.141726] usb 2-4: adding 2-4:1.8 (config #1, interface 8)
[ 8.143719] usb 2-4: adding 2-4:1.9 (config #1, interface 9)
[ 8.145727] usb 2-4: adding 2-4:1.10 (config #1, interface 10)
[ 8.147645] drivers/usb/core/inode.c: creating file '002'
[ 8.147669] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.147675] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010
[ 8.147682] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.147686] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 8.147694] uhci_hcd 0000:00:1a.0: port 1 portsc 0093,00
[ 8.147700] hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 8.153997] cdc_wdm 2-4:1.5: usb_probe_interface
[ 8.154001] cdc_wdm 2-4:1.5: usb_probe_interface - got id
[ 8.154026] cdc_wdm 2-4:1.5: looking for a minor, starting at 0
[ 8.154113] cdc_wdm 2-4:1.5: cdc-wdm-176: USB WDM device
[ 8.154119] cdc_wdm 2-4:1.6: usb_probe_interface
[ 8.154121] cdc_wdm 2-4:1.6: usb_probe_interface - got id
[ 8.154125] cdc_wdm 2-4:1.6: looking for a minor, starting at 0
[ 8.154161] cdc_wdm 2-4:1.6: cdc-wdm-175: USB WDM device
[ 8.154176] usbcore: registered new interface driver cdc_wdm
[ 8.156474] cdc_acm 2-4:1.1: usb_probe_interface
[ 8.156477] cdc_acm 2-4:1.1: usb_probe_interface - got id
[ 8.156594] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
[ 8.158130] cdc_acm 2-4:1.3: usb_probe_interface
[ 8.158134] cdc_acm 2-4:1.3: usb_probe_interface - got id
[ 8.158261] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
[ 8.158883] cdc_acm 2-4:1.9: usb_probe_interface
[ 8.158886] cdc_acm 2-4:1.9: usb_probe_interface - got id
[ 8.159005] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
[ 8.159365] usbcore: registered new interface driver cdc_acm
[ 8.159367] cdc_acm: USB Abstract Control Model driver for USB modems and
ISDN adapters
[ 8.161865] cdc_ether 2-4:1.7: usb_probe_interface
[ 8.161867] cdc_ether 2-4:1.7: usb_probe_interface - got id
[ 8.165545] cdc_ether 2-4:1.7: wwan0: register 'cdc_ether' at
usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 8.165566] usbcore: registered new interface driver cdc_ether
[ 8.166482] usbcore: registered new interface driver zaurus
[ 8.272078] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status
0x101
[ 8.336041] usb usb6: suspend_rh (auto-stop)
[ 8.336068] usb usb8: suspend_rh (auto-stop)
[ 8.384038] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 8.516035] usb 3-1: ep0 maxpacket = 8
[ 8.548712] usb 3-1: skipped 1 descriptor after interface
[ 8.548715] usb 3-1: skipped 1 descriptor after interface
[ 8.548717] usb 3-1: skipped 1 descriptor after interface
[ 8.552689] usb 3-1: default language 0x0409
[ 8.567688] usb 3-1: udev 2, busnum 3, minor = 257
[ 8.567690] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
[ 8.567693] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 8.567694] usb 3-1: Product: USB Receiver
[ 8.567696] usb 3-1: Manufacturer: Logitech
[ 8.567803] usb 3-1: usb_probe_device
[ 8.567807] usb 3-1: configuration #1 chosen from 1 choice
[ 8.572711] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[ 8.572749] usb 3-1: adding 3-1:1.1 (config #1, interface 1)
[ 8.572779] usb 3-1: adding 3-1:1.2 (config #1, interface 2)
[ 8.572835] drivers/usb/core/inode.c: creating file '002'
[ 8.572863] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 8.572872] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00
[ 8.572879] hub 4-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
[ 8.580963] usbhid 3-1:1.0: usb_probe_interface
[ 8.580966] usbhid 3-1:1.0: usb_probe_interface - got id
[ 8.582908] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input13
[ 8.582918] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase
4, 17 us
[ 8.583044] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11
Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
[ 8.583051] usbhid 3-1:1.1: usb_probe_interface
[ 8.583053] usbhid 3-1:1.1: usb_probe_interface - got id
[ 8.584053] usb usb7: suspend_rh (auto-stop)
[ 8.584059] usb usb5: suspend_rh (auto-stop)
[ 8.586065] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input14
[ 8.586070] uhci_hcd 0000:00:1a.0: reserve dev 2 ep82-INT, period 2, phase
1, 17 us
[ 8.586154] usbhid 3-1:1.1: looking for a minor, starting at 0
[ 8.586235] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID
v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
[ 8.586242] usbhid 3-1:1.2: usb_probe_interface
[ 8.586244] usbhid 3-1:1.2: usb_probe_interface - got id
[ 8.591717] usbhid 3-1:1.2: looking for a minor, starting at 0
[ 8.591791] generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11
Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input2
[ 8.591804] usbcore: registered new interface driver usbhid
[ 8.591806] usbhid: USB HID core driver
[ 8.704084] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status
0x101
[ 8.817563] usb 4-2: new full speed USB device number 2 using uhci_hcd
[ 8.972095] usb 4-2: skipped 1 descriptor after interface
[ 8.975095] usb 4-2: default language 0x0409
[ 8.986091] usb 4-2: udev 2, busnum 4, minor = 385
[ 8.986093] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145
[ 8.986095] usb 4-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 8.986097] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[ 8.986099] usb 4-2: Manufacturer: Lenovo Computer Corp
[ 8.986206] usb 4-2: usb_probe_device
[ 8.986210] usb 4-2: configuration #1 chosen from 1 choice
[ 8.988097] usb 4-2: adding 4-2:1.0 (config #1, interface 0)
[ 8.988149] usb 4-2: adding 4-2:1.1 (config #1, interface 1)
[ 8.988188] usb 4-2: adding 4-2:1.2 (config #1, interface 2)
[ 8.988227] usb 4-2: adding 4-2:1.3 (config #1, interface 3)
[ 8.988294] drivers/usb/core/inode.c: creating file '002'
[ 8.988315] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.988321] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.988325] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 9.000297] Bluetooth: Core ver 2.16
[ 9.002074] NET: Registered protocol family 31
[ 9.002076] Bluetooth: HCI device and connection manager initialized
[ 9.002078] Bluetooth: HCI socket layer initialized
[ 9.002080] Bluetooth: L2CAP socket layer initialized
[ 9.003463] Bluetooth: SCO socket layer initialized
[ 9.005897] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 9.005930] btusb 4-2:1.0: usb_probe_interface
[ 9.005933] btusb 4-2:1.0: usb_probe_interface - got id
[ 9.006103] btusb 4-2:1.2: usb_probe_interface
[ 9.006105] btusb 4-2:1.2: usb_probe_interface - got id
[ 9.006113] btusb 4-2:1.3: usb_probe_interface
[ 9.006115] btusb 4-2:1.3: usb_probe_interface - got id
[ 9.006127] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 1, phase
0, 23 us
[ 9.006132] usbcore: registered new interface driver btusb
[ 9.832049] usb 1-6: usb auto-suspend
[ 10.031403] NET: Registered protocol family 10
[ 10.178541] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 10.232152] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 10.233455] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.808105] hub 6-0:1.0: hub_suspend
[ 10.808123] usb usb6: bus auto-suspend
[ 10.808129] usb usb6: suspend_rh
[ 10.808157] hub 8-0:1.0: hub_suspend
[ 10.808166] usb usb8: bus auto-suspend
[ 10.808171] usb usb8: suspend_rh
[ 10.988082] hub 5-0:1.0: hub_suspend
[ 10.988095] usb usb5: bus auto-suspend
[ 10.988101] usb usb5: suspend_rh
[ 10.988126] hub 7-0:1.0: hub_suspend
[ 10.988135] usb usb7: bus auto-suspend
[ 10.988140] usb usb7: suspend_rh
[ 11.089108] uhci_hcd 0000:00:1a.1: release dev 2 ep81-INT, period 1, phase
0, 23 us
[ 11.848039] hub 1-0:1.0: hub_suspend
[ 11.848055] usb usb1: bus auto-suspend
[ 11.848061] ehci_hcd 0000:00:1a.7: suspend root hub
[ 13.513923] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 13.753421] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input15
[ 14.334018] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.537999] eth1: authenticate with 00:27:19:d8:98:f2 (try 1)
[ 17.541158] eth1: authenticated
[ 17.558218] eth1: associate with 00:27:19:d8:98:f2 (try 1)
[ 17.564325] eth1: RX AssocResp from 00:27:19:d8:98:f2 (capab=0x431 status=0
aid=2)
[ 17.564333] eth1: associated
[ 17.582166] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 24.484769] ------------[ cut here ]------------
[ 24.484777] WARNING: at kernel/printk.c:322 do_syslog+0x89/0x438()
[ 24.484779] Hardware name: 2764CTO
[ 24.484780] Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG
(deprecated).
[ 24.484782] Modules linked in: sch_sfq ipv6 ext2 mbcache md_mod
acpi_cpufreq mperf btusb bluetooth crc16 usbhid hid zaurus cdc_ether usbnet
mii cdc_acm cdc_wdm uvcvideo joydev videodev v4l2_compat_ioctl32 media arc4
uhci_hcd snd_hda_codec_conexant sdhci_pci pcmcia firewire_ohci sdhci mmc_core
firewire_core tpm_tis sg thinkpad_acpi sr_mod tpm crc_itu_t tpm_bios nvram
cdrom ac battery iwlagn wmi psmouse serio_raw mac80211 evdev thermal
yenta_socket pcmcia_rsrc pcmcia_core cfg80211 rfkill snd_hda_intel
snd_hda_codec snd_hwdep snd_pcm pcspkr i2c_i801 processor snd_timer snd
soundcore iTCO_wdt snd_page_alloc iTCO_vendor_support ehci_hcd e1000e usbcore
xfs sd_mod crc_t10dif ahci libahci libata scsi_mod cbc cryptd aes_x86_64
aes_generic dm_crypt dm_mod [last unloaded: scsi_wait_scan]
[ 24.484840] Pid: 2705, comm: syslog-ng Not tainted 3.0.0-rc5-00063-g0d72c6f
#7
[ 24.484842] Call Trace:
[ 24.484845] [<ffffffff8103aa14>] warn_slowpath_common+0x7e/0x96
[ 24.484848] [<ffffffff8103aac0>] warn_slowpath_fmt+0x41/0x43
[ 24.484851] [<ffffffff81043da1>] ? ns_capable+0x35/0x4a
[ 24.484854] [<ffffffff8103b060>] do_syslog+0x89/0x438
[ 24.484857] [<ffffffff81103d9c>] ? _d_rehash+0x44/0x46
[ 24.484860] [<ffffffff81103dc4>] ? d_rehash+0x26/0x2b
[ 24.484863] [<ffffffff81143c6f>] kmsg_open+0x17/0x19
[ 24.484866] [<ffffffff8113afe4>] proc_reg_open+0xab/0x148
[ 24.484869] [<ffffffff81143c58>] ? kmsg_release+0x18/0x18
[ 24.484871] [<ffffffff81143c40>] ? seq_open_net+0x76/0x76
[ 24.484874] [<ffffffff8113af39>] ? proc_alloc_inode+0x9c/0x9c
[ 24.484878] [<ffffffff810f1372>] __dentry_open+0x1fb/0x312
[ 24.484881] [<ffffffff810fc9c3>] ? do_lookup+0x240/0x298
[ 24.484883] [<ffffffff810f2337>] nameidata_to_filp+0x5b/0x62
[ 24.484886] [<ffffffff810fe2d2>] do_last+0x5c4/0x725
[ 24.484889] [<ffffffff810fefa7>] path_openat+0xc3/0x368
[ 24.484892] [<ffffffff8108b7e3>] ? call_rcu+0x10/0x12
[ 24.484894] [<ffffffff810fc077>] ? putname+0x2d/0x36
[ 24.484897] [<ffffffff810ff27f>] do_filp_open+0x33/0x81
[ 24.484900] [<ffffffff811091ac>] ? alloc_fd+0x104/0x116
[ 24.484903] [<ffffffff810f243d>] do_sys_open+0xff/0x191
[ 24.484906] [<ffffffff810f24ea>] sys_open+0x1b/0x1d
[ 24.484910] [<ffffffff81405d3b>] system_call_fastpath+0x16/0x1b
[ 24.484912] ---[ end trace fb9b2637d8efb238 ]---
[ 24.514624] auditd (2717): /proc/2717/oom_adj is deprecated, please use
/proc/2717/oom_score_adj instead.
[ 24.934853] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.934856] Bluetooth: BNEP filters: protocol multicast
[ 24.959369] Bluetooth: RFCOMM TTY layer initialized
[ 24.959373] Bluetooth: RFCOMM socket layer initialized
[ 24.959375] Bluetooth: RFCOMM ver 1.11
[ 25.713397] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 1, phase
0, 23 us
[ 26.484040] iwlagn 0000:03:00.0: iwlagn_tx_agg_start on ra =
00:27:19:d8:98:f2 tid = 0
[ 27.952073] eth1: no IPv6 routers present
[ 35.782932] ata1.00: configured for UDMA/133
[ 35.782935] ata1: EH complete
[ 70.473024] PM: Syncing filesystems ... done.
[ 71.182076] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 71.196114] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[ 71.212235] Suspending console(s) (use no_console_suspend to debug)
[ 71.214368] usb 2-4: usb suspend
[ 71.215664] uhci_hcd 0000:00:1a.0: release dev 2 ep82-INT, period 2, phase
1, 17 us
[ 71.216051] uhci_hcd 0000:00:1a.1: release dev 2 ep81-INT, period 1, phase
0, 23 us
[ 71.216636] uhci_hcd 0000:00:1a.0: release dev 2 ep81-INT, period 8, phase
4, 17 us
[ 71.218043] usb 4-2: usb suspend
[ 71.218651] usb 3-1: usb suspend
[ 71.373252] hub 4-0:1.0: hub_suspend
[ 71.373263] usb usb4: bus suspend
[ 71.373268] usb usb4: suspend_rh
[ 71.373305] hub 3-0:1.0: hub_suspend
[ 71.373313] usb usb3: bus suspend
[ 71.373317] usb usb3: suspend_rh
[ 71.373350] hub 2-0:1.0: hub_suspend
[ 71.373357] usb usb2: bus suspend
[ 71.373363] ehci_hcd 0000:00:1d.7: suspend root hub
[ 71.373721] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 71.373793] sd 0:0:0:0: [sda] Stopping disk
[ 71.457255] ACPI handle has no context!
[ 71.457272] sdhci-pci 0000:15:00.2: PCI INT C disabled
[ 71.457284] ACPI handle has no context!
[ 71.457393] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 71.457405] uhci_hcd 0000:00:1d.2: uhci_pci_suspend
[ 71.457424] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 71.457432] uhci_hcd 0000:00:1d.1: uhci_pci_suspend
[ 71.457449] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 71.457457] uhci_hcd 0000:00:1d.0: uhci_pci_suspend
[ 71.457473] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 71.457576] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[ 71.457584] HDA Intel 0000:00:1b.0: PCI INT B disabled
[ 71.457592] uhci_hcd 0000:00:1a.2: uhci_pci_suspend
[ 71.457610] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 71.457618] uhci_hcd 0000:00:1a.1: uhci_pci_suspend
[ 71.457635] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 71.457642] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 71.457659] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 71.464090] ACPI handle has no context!
[ 71.472082] i915 0000:00:02.0: power state changed by ACPI to D3
[ 71.552504] e1000e 0000:00:19.0: PCI INT A disabled
[ 71.552518] e1000e 0000:00:19.0: PME# enabled
[ 71.552535] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 71.568091] PM: suspend of devices complete after 354.027 msecs
[ 71.584201] ehci_hcd 0000:00:1d.7: wakeup: 0
[ 71.600054] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[ 71.600063] ehci_hcd 0000:00:1d.7: --> PCI D3hot
[ 71.600111] uhci_hcd 0000:00:1d.2: wakeup: 0
[ 71.600118] uhci_hcd 0000:00:1d.2: --> PCI D0
[ 71.600165] uhci_hcd 0000:00:1d.1: wakeup: 0
[ 71.600172] uhci_hcd 0000:00:1d.1: --> PCI D0
[ 71.600218] uhci_hcd 0000:00:1d.0: wakeup: 0
[ 71.600236] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 71.600241] uhci_hcd 0000:00:1d.0: --> PCI D3hot
[ 71.600300] ehci_hcd 0000:00:1a.7: wakeup: 0
[ 71.616050] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[ 71.616059] ehci_hcd 0000:00:1a.7: --> PCI D3hot
[ 71.616106] uhci_hcd 0000:00:1a.2: wakeup: 0
[ 71.616123] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3
[ 71.616129] uhci_hcd 0000:00:1a.2: --> PCI D3hot
[ 71.616176] uhci_hcd 0000:00:1a.1: wakeup: 0
[ 71.616182] uhci_hcd 0000:00:1a.1: --> PCI D0
[ 71.616229] uhci_hcd 0000:00:1a.0: wakeup: 0
[ 71.636057] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 71.636063] uhci_hcd 0000:00:1a.0: --> PCI D3hot
[ 71.636195] PM: late suspend of devices complete after 68.095 msecs
[ 71.638253] ACPI: Preparing to enter system sleep state S3
[ 71.796094] PM: Saving platform NVS memory
[ 71.806249] Disabling non-boot CPUs ...
[ 71.806696] Broke affinity for irq 9
[ 71.806708] Broke affinity for irq 12
[ 71.806727] Broke affinity for irq 17
[ 71.967421] CPU 1 is now offline
[ 71.968148] Extended CMOS year: 2000
[ 71.968148] ACPI: Low-level resume complete
[ 71.968148] PM: Restoring platform NVS memory
[ 71.968148] Extended CMOS year: 2000
[ 71.968148] Enabling non-boot CPUs ...
[ 71.976326] Booting Node 0 Processor 1 APIC 0x1
[ 71.976328] smpboot cpu 1: start_ip = 99000
[ 71.807837] Disabled fast string operations
[ 72.068121] Switched to NOHz mode on CPU #1
[ 72.100754] CPU1 is up
[ 72.102589] ACPI: Waking up from system sleep state S3
[ 72.672227] i915 0000:00:02.0: restoring config space at offset 0x1 (was
0x900007, writing 0x900407)
[ 72.672285] pci 0000:00:02.1: restoring config space at offset 0x1 (was
0x900000, writing 0x900007)
[ 72.672312] pci 0000:00:03.0: restoring config space at offset 0xf (was
0x100, writing 0x10b)
[ 72.672338] pci 0000:00:03.0: restoring config space at offset 0x1 (was
0x100006, writing 0x180006)
[ 72.692056] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 72.692066] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 72.692113] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 72.692137] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 72.692144] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 72.692194] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 72.692219] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 72.692226] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 72.692273] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 72.692294] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 72.692301] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 72.692360] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1
(was 0x2900106, writing 0x2900102)
[ 72.692392] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 72.692402] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 72.692466] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1
(was 0x100106, writing 0x100102)
[ 72.692530] pcieport 0000:00:1c.0: restoring config space at offset 0x9
(was 0x1fff1, writing 0xc051c041)
[ 72.692542] pcieport 0000:00:1c.0: restoring config space at offset 0x8
(was 0xfff0, writing 0xc030c020)
[ 72.692553] pcieport 0000:00:1c.0: restoring config space at offset 0x7
(was 0xf0, writing 0x9090)
[ 72.692575] pcieport 0000:00:1c.0: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 72.692667] pcieport 0000:00:1c.1: restoring config space at offset 0x9
(was 0x1fff1, writing 0xc011c001)
[ 72.692681] pcieport 0000:00:1c.1: restoring config space at offset 0x7
(was 0x200000f0, writing 0x8080)
[ 72.692703] pcieport 0000:00:1c.1: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 72.692810] pcieport 0000:00:1c.3: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 72.692917] pcieport 0000:00:1c.4: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 72.692977] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 72.692984] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 72.693030] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 72.693052] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 72.693059] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 72.693108] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 72.693171] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 72.693244] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1
(was 0x2900106, writing 0x2900102)
[ 72.693276] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 72.693286] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 72.693467] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was
0x2b00007, writing 0x2b00407)
[ 72.708059] firewire_ohci 0000:15:00.1: BAR 0: set to [mem
0xf4801000-0xf48017ff] (PCI address [0xf4801000-0xf48017ff])
[ 72.708113] firewire_ohci 0000:15:00.1: restoring config space at offset
0x3 (was 0x800000, writing 0x802010)
[ 72.708128] firewire_ohci 0000:15:00.1: restoring config space at offset
0x1 (was 0x2100000, writing 0x2100106)
[ 72.724055] sdhci-pci 0000:15:00.2: BAR 0: set to [mem
0xf4801800-0xf48018ff] (PCI address [0xf4801800-0xf48018ff])
[ 72.724108] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3
(was 0x800000, writing 0x802010)
[ 72.724123] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1
(was 0x2100000, writing 0x2100106)
[ 72.725120] PM: early resume of devices complete after 53.043 msecs
[ 72.725317] i915 0000:00:02.0: power state changed by ACPI to D0
[ 72.725329] i915 0000:00:02.0: power state changed by ACPI to D0
[ 72.725385] i915 0000:00:02.0: setting latency timer to 64
[ 72.725689] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 72.725700] e1000e 0000:00:19.0: PME# disabled
[ 72.725820] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 72.727986] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 72.727994] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 72.728035] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 72.728048] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 72.728057] uhci_hcd 0000:00:1a.0: uhci_pci_resume
[ 72.728065] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2f00
[ 72.728071] uhci_hcd 0000:00:1a.0: Performing full reset
[ 72.728103] usb usb3: root hub lost power or was reset
[ 72.728129] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[ 72.728141] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 72.728149] uhci_hcd 0000:00:1a.1: uhci_pci_resume
[ 72.728156] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000
[ 72.728162] uhci_hcd 0000:00:1a.1: Performing full reset
[ 72.728192] usb usb4: root hub lost power or was reset
[ 72.728211] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 72.728218] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 72.728228] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ
22
[ 72.728240] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 72.728248] uhci_hcd 0000:00:1a.2: uhci_pci_resume
[ 72.728255] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x2000
[ 72.728260] uhci_hcd 0000:00:1a.2: Performing full reset
[ 72.728290] usb usb5: root hub lost power or was reset
[ 72.728312] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 72.728322] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 72.728335] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ
23
[ 72.728347] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 72.728437] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 72.728454] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 72.728518] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 72.728621] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 72.728628] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 72.728639] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 72.728651] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 72.728659] uhci_hcd 0000:00:1d.0: uhci_pci_resume
[ 72.728666] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00
[ 72.728672] uhci_hcd 0000:00:1d.0: Performing full reset
[ 72.728702] usb usb6: root hub lost power or was reset
[ 72.728724] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 72.728736] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 72.728743] uhci_hcd 0000:00:1d.1: uhci_pci_resume
[ 72.728751] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
[ 72.728756] uhci_hcd 0000:00:1d.1: Performing full reset
[ 72.728786] usb usb7: root hub lost power or was reset
[ 72.728807] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 72.728820] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 72.728827] uhci_hcd 0000:00:1d.2: uhci_pci_resume
[ 72.728835] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
[ 72.728840] uhci_hcd 0000:00:1d.2: Performing full reset
[ 72.728870] usb usb8: root hub lost power or was reset
[ 72.728891] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 72.728901] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 72.728914] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ
19
[ 72.728926] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 72.729008] pci 0000:00:1e.0: setting latency timer to 64
[ 72.729036] ahci 0000:00:1f.2: setting latency timer to 64
[ 72.729151] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 72.729159] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW
doesn't fully claim to support it.
[ 72.730227] sd 0:0:0:0: [sda] Starting disk
[ 72.730330] usb usb1: usb resume
[ 72.730338] ehci_hcd 0000:00:1a.7: resume root hub
[ 72.730466] usb usb2: usb resume
[ 72.730472] ehci_hcd 0000:00:1d.7: resume root hub
[ 72.730580] usb usb3: usb resume
[ 72.730582] usb usb3: wakeup_rh
[ 72.730663] usb usb4: usb resume
[ 72.730664] usb usb4: wakeup_rh
[ 72.730742] usb usb5: usb resume
[ 72.730743] usb usb5: wakeup_rh
[ 72.730825] usb usb6: usb resume
[ 72.730826] usb usb6: wakeup_rh
[ 72.730895] usb usb7: usb resume
[ 72.730896] usb usb7: wakeup_rh
[ 72.730976] usb usb8: usb resume
[ 72.730978] usb usb8: wakeup_rh
[ 72.744069] hub 3-0:1.0: hub_reset_resume
[ 72.744077] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 72.744097] hub 4-0:1.0: hub_reset_resume
[ 72.744103] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 72.744115] hub 5-0:1.0: hub_reset_resume
[ 72.744120] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 72.744133] hub 6-0:1.0: hub_reset_resume
[ 72.744138] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 72.744150] hub 7-0:1.0: hub_reset_resume
[ 72.744155] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 72.744168] hub 8-0:1.0: hub_reset_resume
[ 72.744174] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 72.744877] legacy_resume(): pnp_bus_resume+0x0/0x67 returns -19
[ 72.744879] PM: Device 00:0a failed to resume: error -19
[ 72.756043] hub 2-0:1.0: hub_resume
[ 72.756057] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001002 0 ACK
POWER sig=se0 CSC
[ 72.756060] hub 2-0:1.0: port 4: status 0100 change 0001
[ 72.784150] firewire_core: skipped bus generations, destroying all nodes
[ 72.826917] Extended CMOS year: 2000
[ 72.848107] uhci_hcd 0000:00:1a.0: port 1 portsc 008a,00
[ 72.848117] hub 3-0:1.0: port 1: status 0100 change 0003
[ 72.848160] uhci_hcd 0000:00:1a.1: port 2 portsc 008a,00
[ 72.848167] hub 4-0:1.0: port 2: status 0100 change 0003
[ 72.860143] hub 2-0:1.0: port 4 status 0000.0100 after resume, -19
[ 72.860149] usb 2-4: can't resume, status -19
[ 72.860154] hub 2-0:1.0: logical disconnect on port 4
[ 72.860314] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion
[ 72.860327] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003801 0 ACK
POWER OWNER sig=j CONNECT
[ 72.860567] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001800 0 ACK
POWER sig=j
[ 72.860575] ehci_hcd 0000:00:1a.7: failed handover port 1: 1800
[ 72.876091] hub 1-0:1.0: hub_resume
[ 72.876106] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 72.876116] hub 1-0:1.0: port 1: status 0501 change 0001
[ 72.876142] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK
POWER OWNER sig=se0 CSC
[ 72.876165] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 72.876173] hub 1-0:1.0: port 6: status 0501 change 0001
[ 72.980142] usb 1-6: finish reset-resume
[ 72.980176] hub 3-0:1.0: port 1 status 0000.0100 after resume, -19
[ 72.980186] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00
[ 72.980193] usb 3-1: can't resume, status -19
[ 72.980198] hub 3-0:1.0: logical disconnect on port 1
[ 72.980205] usb 4-2: finish reset-resume
[ 73.036277] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 73.036289] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 73.048114] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 73.051002] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 73.052064] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 73.052074] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 73.052106] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 73.056601] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 73.057679] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 73.057688] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 73.058699] ata2.00: configured for UDMA/100
[ 73.092084] usb 1-6: reset high speed USB device number 4 using ehci_hcd
[ 73.148333] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 73.148346] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 73.284116] firewire_core: rediscovered device fw0
[ 73.336109] usb 4-2: reset full speed USB device number 2 using uhci_hcd
[ 73.365888] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 73.365898] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 73.365907] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 73.487102] btusb 4-2:1.0: no reset_resume for driver btusb?
[ 73.487110] btusb 4-2:1.1: no reset_resume for driver btusb?
[ 73.487116] btusb 4-2:1.0: forced unbind
[ 73.506115] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 73.506124] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 73.506133] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 73.566128] ata1.00: configured for UDMA/133
[ 73.614324] thinkpad_acpi: restoring fan level to 0x07
[ 73.807331] PM: resume of devices complete after 1082.079 msecs
[ 73.807378] btusb 4-2:1.0: usb_probe_interface
[ 73.807384] btusb 4-2:1.0: usb_probe_interface - got id
[ 73.808033] usb usb6: suspend_rh (auto-stop)
[ 73.808067] usb usb8: suspend_rh (auto-stop)
[ 73.808098] usb usb5: suspend_rh (auto-stop)
[ 73.808128] usb usb7: suspend_rh (auto-stop)
[ 73.808645] Restarting tasks ...
[ 73.809723] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 1, phase
0, 23 us
[ 73.809794] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 73.809810] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 73.809820] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 73.809830] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 73.809840] hub 2-0:1.0: state 7 ports 6 chg 0010 evt 0000
[ 73.809856] hub 2-0:1.0: port 4, status 0100, change 0000, 12 Mb/s
[ 73.809863] usb 2-4: USB disconnect, device number 2
[ 73.809868] usb 2-4: unregistering device
[ 73.809874] usb 2-4: unregistering interface 2-4:1.0
[ 73.809956] usb 2-4: unregistering interface 2-4:1.1
[ 73.810598] usb 2-4: unregistering interface 2-4:1.2
[ 73.810692] usb 2-4: unregistering interface 2-4:1.3
[ 73.811085] usb 2-4: unregistering interface 2-4:1.4
[ 73.811180] usb 2-4: unregistering interface 2-4:1.5
[ 73.811231] drivers/usb/core/file.c: removing 0 minor
[ 73.811364] usb 2-4: unregistering interface 2-4:1.6
[ 73.811412] drivers/usb/core/file.c: removing 1 minor
[ 73.811538] usb 2-4: unregistering interface 2-4:1.7
[ 73.811594] cdc_ether 2-4:1.7: wwan0: unregister 'cdc_ether'
usb-0000:00:1d.7-4, Mobile Broadband Network Device
[ 73.823457] done.
[ 73.823470] video LNXVIDEO:00: Restoring backlight state
[ 74.056070] usb usb3: suspend_rh (auto-stop)
[ 75.808106] hub 5-0:1.0: hub_suspend
[ 75.808119] usb usb5: bus auto-suspend
[ 75.808122] usb usb5: suspend_rh
[ 75.808415] hub 6-0:1.0: hub_suspend
[ 75.808420] usb usb6: bus auto-suspend
[ 75.808423] usb usb6: suspend_rh
[ 75.808442] hub 7-0:1.0: hub_suspend
[ 75.808446] usb usb7: bus auto-suspend
[ 75.808448] usb usb7: suspend_rh
[ 75.808466] hub 8-0:1.0: hub_suspend
[ 75.808471] usb usb8: bus auto-suspend
[ 75.808473] usb usb8: suspend_rh


>
> Alan Stern


--
Arkadiusz Miśkiewicz PLD/Linux Team
arekm / maven.pl http://ftp.pld-linux.org/

2011-06-29 21:26:09

by Alan Stern

Subject: Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram

On Wed, 29 Jun 2011, Arkadiusz Miskiewicz wrote:

> On Wednesday 29 of June 2011, Alan Stern wrote:
> > On Wed, 29 Jun 2011, Arkadiusz Miskiewicz wrote:
> > > Hi,
> > >
> > > Something broke between rc3 and rc5. Thinkpad t400, logitech usb mouse.
> > > After resume from ram usb device no longer works. Somewhere around rc3 it
> > > was working fine.
> >
> > Obviously you can try bisection to find the problem. But if you don't
> > want to go through that, you could post the dmesg from a kernel that
> > has CONFIG_USB_DEBUG enabled.
>
> CONFIG_USB_DEBUG will be faster but I'll bisect if no one figures out what's
> wrong.

Actually bisection might end up being quicker. This looks like a
pretty tricky problem. Maybe you should start a bisection while I look
at this stuff; you'll probably reach an answer before I do!

> Note that I tried to unplug & plugin usb mouse after all this dmesg but
> nothing new appeared in dmesg - kernel didn't notice that I did that.

Something funny is going on. It might be a problem with the EHCI
controller.

> [ 72.848107] uhci_hcd 0000:00:1a.0: port 1 portsc 008a,00
> [ 72.848117] hub 3-0:1.0: port 1: status 0100 change 0003
> [ 72.848160] uhci_hcd 0000:00:1a.1: port 2 portsc 008a,00
> [ 72.848167] hub 4-0:1.0: port 2: status 0100 change 0003
> [ 72.860143] hub 2-0:1.0: port 4 status 0000.0100 after resume, -19
> [ 72.860149] usb 2-4: can't resume, status -19
> [ 72.860154] hub 2-0:1.0: logical disconnect on port 4
> [ 72.860314] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion
> [ 72.860327] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003801 0 ACK
> POWER OWNER sig=j CONNECT
> [ 72.860567] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001800 0 ACK
> POWER sig=j
> [ 72.860575] ehci_hcd 0000:00:1a.7: failed handover port 1: 1800

That last line is the smoking gun. But I don't know what caused it. I
also don't know why unplugging and replugging the Logitech receiver had
no effect.

Alan Stern

2011-06-30 15:19:11

by Alan Stern

Subject: Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram

On Wed, 29 Jun 2011, Alan Stern wrote:

> On Wed, 29 Jun 2011, Arkadiusz Miskiewicz wrote:
>
> > On Wednesday 29 of June 2011, Alan Stern wrote:
> > > On Wed, 29 Jun 2011, Arkadiusz Miskiewicz wrote:
> > > > Hi,
> > > >
> > > > Something broke between rc3 and rc5. Thinkpad t400, logitech usb mouse.
> > > > After resume from ram usb device no longer works. Somewhere around rc3 it
> > > > was working fine.
> > >
> > > Obviously you can try bisection to find the problem. But if you don't
> > > want to go through that, you could post the dmesg from a kernel that
> > > has CONFIG_USB_DEBUG enabled.
> >
> > CONFIG_USB_DEBUG will be faster but I'll bisect if no one figures out what's
> > wrong.
>
> Actually bisection might end up being quicker. This looks like a
> pretty tricky problem. Maybe you should start a bisection while I look
> at this stuff; you'll probably reach an answer before I do!
>
> > Note that I tried to unplug & plugin usb mouse after all this dmesg but
> > nothing new appeared in dmesg - kernel didn't notice that I did that.

The log suggests that something went wrong somewhere around here:

[ 73.811538] usb 2-4: unregistering interface 2-4:1.7
[ 73.811594] cdc_ether 2-4:1.7: wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device
[ 73.823457] done.
[ 73.823470] video LNXVIDEO:00: Restoring backlight state
[ 74.056070] usb usb3: suspend_rh (auto-stop)

(I don't have any idea what that "done" refers to.) There should have
been additional messages about unregistering interfaces 2-4:1.8,
2-4:1.9, and 2-4:1.10. So perhaps the cdc_ether unregistration got
hung up. Can you get a stack trace for the khubd thread at this point?

Also, you can try unloading cdc-ether before starting the suspend to
see if that makes any difference.

Alan Stern

2011-06-30 15:25:16

by Arkadiusz Miskiewicz

Subject: Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram

On Wednesday 29 of June 2011, Alan Stern wrote:
> On Wed, 29 Jun 2011, Arkadiusz Miskiewicz wrote:
> > On Wednesday 29 of June 2011, Alan Stern wrote:
> > > On Wed, 29 Jun 2011, Arkadiusz Miskiewicz wrote:
> > > > Hi,
> > > >
> > > > Something broke between rc3 and rc5. Thinkpad t400, logitech usb
> > > > mouse. After resume from ram usb device no longer works. Somewhere
> > > > around rc3 it was working fine.
> > >
> > > Obviously you can try bisection to find the problem. But if you don't
> > > want to go through that, you could post the dmesg from a kernel that
> > > has CONFIG_USB_DEBUG enabled.
> >
> > CONFIG_USB_DEBUG will be faster but I'll bisect if no one figures out
> > what's wrong.
>
> Actually bisection might end up being quicker. This looks like a
> pretty tricky problem. Maybe you should start a bisection while I look
> at this stuff; you'll probably reach an answer before I do!

Looks tricky indeed. There seem to be two related problems actually. I'm
bisecting between rc3 (good) and rc5 (bad).

At 3.0.0-rc4-00059-g143e859 usb auto-suspend suspends my mouse usb port after
like 4 seconds when I don't move mouse. That's not a problem. The problem is
that resume takes like 1-2seconds and in that time mouse cursor doesn't move
when I move mouse of course.

With previous kernel (rc5) the problem become worse as I described in previous
emails.

So for now I'm bisecting autosuspend issue since maybe it is some indirect
cause of usb-not-working-at-all in rc5 problem.

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-rc4-00059-g143e859 (arekm@ixion-pld) (gcc
version 4.6.1 20110627 (release) (PLD-Linux) ) #10 SMP PREEMPT Thu Jun 30
15:57:48 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0
root=/dev/mapper/lrootfs ro resume=/dev/sda2 panic=60 reboot=acpi
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd4a1000 (usable)
[ 0.000000] BIOS-e820: 00000000bd4a1000 - 00000000bd4a7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd4a7000 - 00000000bd5b7000 (usable)
[ 0.000000] BIOS-e820: 00000000bd5b7000 - 00000000bd60f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd60f000 - 00000000bd6c6000 (usable)
[ 0.000000] BIOS-e820: 00000000bd6c6000 - 00000000bd6d1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd6d1000 - 00000000bd6d4000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd6d4000 - 00000000bd6d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd6d8000 - 00000000bd6dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd6dc000 - 00000000bd6df000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd6df000 - 00000000bd706000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd706000 - 00000000bd708000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd708000 - 00000000bd90f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd90f000 - 00000000bd99f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd99f000 - 00000000bd9ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd9ff000 - 00000000bda00000 (usable)
[ 0.000000] BIOS-e820: 00000000bdc00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 2764CTO/2764CTO, BIOS 7UET91WW (3.21 ) 12/06/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 13C000000 mask FFC000000 uncachable
[ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 080000000 mask FC0000000 write-back
[ 0.000000] 4 base 100000000 mask FC0000000 write-back
[ 0.000000] 5 base 0BDE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000bde00000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xbda00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6480] f6480
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bda00000
[ 0.000000] 0000000000 - 00bda00000 page 2M
[ 0.000000] kernel direct mapping tables up to bda00000 @ bd6c2000-bd6c6000
[ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000
[ 0.000000] 0100000000 - 013c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 13c000000 @
13bffa000-13c000000
[ 0.000000] RAMDISK: 37eb0000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f6440 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bd949b5a 0009C (v01 LENOVO TP-7U 00003210
LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bd949d00 000F4 (v03 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bd94a10e 0FAE1 (v01 LENOVO TP-7U 00003210
MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bd98e000 00040
[ 0.000000] ACPI: SSDT 00000000bd949eb4 0025A (v01 LENOVO TP-7U 00003210
MSFT 03000000)
[ 0.000000] ACPI: ECDT 00000000bd959bef 00052 (v01 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bd959c41 00078 (v01 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bd959cb9 0003C (v01 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bd959cf5 00038 (v01 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: SLIC 00000000bd959dc2 00176 (v01 LENOVO TP-7U 00003210
LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bd959f38 00028 (v01 LENOVO TP-7U 00003210
LTP 00000001)
[ 0.000000] ACPI: ASF! 00000000bd959f60 000A0 (v16 LENOVO TP-7U 00003210
PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bd98d1fa 00568 (v01 LENOVO TP-7U 00003210
INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bd707000 00032 (v00 00000000
00000000)
[ 0.000000] ACPI: DMAR 00000000bd706000 00120 (v01 ? 00000001
00000000)
[ 0.000000] ACPI: SSDT 00000000bd6d3000 00655 (v01 PmRef CpuPm 00003000
INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bd6d2000 00274 (v01 PmRef Cpu0Tst 00003000
INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bd6d1000 00242 (v01 PmRef ApTst 00003000
INTL 20050624)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T400
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000013c000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000013c000000
[ 0.000000] NODE_DATA [000000013bffb000 - 000000013bffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880137600000-
ffff88013adfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0013c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bd4a1
[ 0.000000] 0: 0x000bd4a7 -> 0x000bd5b7
[ 0.000000] 0: 0x000bd60f -> 0x000bd6c6
[ 0.000000] 0: 0x000bd9ff -> 0x000bda00
[ 0.000000] 0: 0x00100000 -> 0x0013c000
[ 0.000000] On node 0 totalpages: 1021431
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 757409 pages, LIFO batch:31
[ 0.000000] Normal zone: 3360 pages used for memmap
[ 0.000000] Normal zone: 242400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] 4 Processors exceeds NR_CPUS limit of 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bd4a1000 -
00000000bd4a7000
[ 0.000000] PM: Registered nosave memory: 00000000bd5b7000 -
00000000bd60f000
[ 0.000000] PM: Registered nosave memory: 00000000bd6c6000 -
00000000bd6d1000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d1000 -
00000000bd6d4000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d4000 -
00000000bd6d8000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d8000 -
00000000bd6dc000
[ 0.000000] PM: Registered nosave memory: 00000000bd6dc000 -
00000000bd6df000
[ 0.000000] PM: Registered nosave memory: 00000000bd6df000 -
00000000bd706000
[ 0.000000] PM: Registered nosave memory: 00000000bd706000 -
00000000bd708000
[ 0.000000] PM: Registered nosave memory: 00000000bd708000 -
00000000bd90f000
[ 0.000000] PM: Registered nosave memory: 00000000bd90f000 -
00000000bd99f000
[ 0.000000] PM: Registered nosave memory: 00000000bd99f000 -
00000000bd9ff000
[ 0.000000] PM: Registered nosave memory: 00000000bda00000 -
00000000bdc00000
[ 0.000000] PM: Registered nosave memory: 00000000bdc00000 -
00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 -
00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 -
00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 -
00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 -
00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 -
00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 -
00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 -
00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 -
00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000ff800000
[ 0.000000] PM: Registered nosave memory: 00000000ff800000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap:
c0000000:20000000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88013bc00000 s69760 r8192
d24448 u1048576
[ 0.000000] pcpu-alloc: s69760 r8192 d24448 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1003730
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0
root=/dev/mapper/lrootfs ro resume=/dev/sda2 panic=60 reboot=acpi
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3950220k/5177344k available (4132k kernel code,
1091620k absent, 135504k reserved, 4578k data, 568k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:320
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2526.872 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5053.74 BogoMIPS (lpj=10107488)
[ 0.004119] pid_max: default: 32768 minimum: 301
[ 0.004202] Security Framework initialized
[ 0.004576] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.006713] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.007728] Mount-cache hash table entries: 256
[ 0.008135] Initializing cgroup subsys cpuacct
[ 0.008197] Initializing cgroup subsys memory
[ 0.008261] Initializing cgroup subsys devices
[ 0.008315] Initializing cgroup subsys freezer
[ 0.008371] Initializing cgroup subsys perf_event
[ 0.008454] Disabled fast string operations
[ 0.008512] CPU: Physical Processor ID: 0
[ 0.008566] CPU: Processor Core ID: 0
[ 0.008620] mce: CPU supports 6 MCE banks
[ 0.008681] CPU0: Thermal monitoring enabled (TM2)
[ 0.008738] using mwait in idle threads.
[ 0.008810] ACPI: Core revision 20110413
[ 0.020386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060134] CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping
06
[ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.064003] ... version: 2
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.088019] Booting Node 0, Processors #1 Ok.
[ 0.088116] smpboot cpu 1: start_ip = 99000
[ 0.008000] Disabled fast string operations
[ 0.180026] Brought up 2 CPUs
[ 0.180138] Total of 2 processors activated (10107.70 BogoMIPS).
[ 0.181760] devtmpfs: initialized
[ 0.181760] PM: Registering ACPI NVS region at bd6c6000 (45056 bytes)
[ 0.181760] PM: Registering ACPI NVS region at bd6d8000 (16384 bytes)
[ 0.181760] PM: Registering ACPI NVS region at bd6df000 (159744 bytes)
[ 0.181760] PM: Registering ACPI NVS region at bd90f000 (589824 bytes)
[ 0.181760] print_constraints: dummy:
[ 0.181760] NET: Registered protocol family 16
[ 0.181760] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.181760] ACPI: bus type pci registered
[ 0.181760] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.181760] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.192508] PCI: Using configuration type 1 for base access
[ 0.192579] bio: create slab <bio-0> at 0
[ 0.192579] ACPI: Added _OSI(Linux)
[ 0.197112] ACPI: EC: EC description table is found, configuring boot EC
[ 0.203375] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
[ 0.213320] ACPI: SSDT 00000000bd6d6c20 002C8 (v01 PmRef Cpu0Ist 00003000
INTL 20050624)
[ 0.213871] ACPI: Dynamic OEM Table Load:
[ 0.214008] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000
INTL 20050624)
[ 0.214297] ACPI: SSDT 00000000bd6d4020 0087A (v01 PmRef Cpu0Cst 00003001
INTL 20050624)
[ 0.214878] ACPI: Dynamic OEM Table Load:
[ 0.215014] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001
INTL 20050624)
[ 0.240222] ACPI: SSDT 00000000bd6d5ca0 001CF (v01 PmRef ApIst 00003000
INTL 20050624)
[ 0.240790] ACPI: Dynamic OEM Table Load:
[ 0.240926] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000
INTL 20050624)
[ 0.252114] ACPI: SSDT 00000000bd6d5f20 0008D (v01 PmRef ApCst 00003000
INTL 20050624)
[ 0.252665] ACPI: Dynamic OEM Table Load:
[ 0.252802] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000
INTL 20050624)
[ 0.272027] ACPI: Interpreter enabled
[ 0.272085] ACPI: (supports S0 S3 S4 S5)
[ 0.272316] ACPI: Using IOAPIC for interrupt routing
[ 0.284120] ACPI: Power Resource [PUBS] (on)
[ 0.300167] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.300338] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.300384] HEST: Table not found.
[ 0.300440] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.300730] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.300822] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.300822] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.300822] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.300822] pci_root PNP0A08:00: host bridge window [mem
0x000d0000-0x000d3fff]
[ 0.300822] pci_root PNP0A08:00: host bridge window [mem
0x000d4000-0x000d7fff]
[ 0.300822] pci_root PNP0A08:00: host bridge window [mem
0x000d8000-0x000dbfff]
[ 0.300822] pci_root PNP0A08:00: host bridge window [mem
0xc0000000-0xfebfffff]
[ 0.300822] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.300822] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.300822] pci 0000:00:02.0: reg 10: [mem 0xf4400000-0xf47fffff 64bit]
[ 0.300822] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit
pref]
[ 0.300822] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.300822] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.300822] pci 0000:00:02.1: reg 10: [mem 0xf4200000-0xf42fffff 64bit]
[ 0.300822] pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780
[ 0.300822] pci 0000:00:03.0: reg 10: [mem 0xfc226800-0xfc22680f 64bit]
[ 0.300822] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.300822] pci 0000:00:03.0: PME# disabled
[ 0.300822] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200
[ 0.300822] pci 0000:00:19.0: reg 10: [mem 0xfc000000-0xfc01ffff]
[ 0.300830] pci 0000:00:19.0: reg 14: [mem 0xfc025000-0xfc025fff]
[ 0.300841] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
[ 0.300908] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.300913] pci 0000:00:19.0: PME# disabled
[ 0.300939] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.300994] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
[ 0.301051] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.301106] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
[ 0.301162] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.301217] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf]
[ 0.301285] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.301310] pci 0000:00:1a.7: reg 10: [mem 0xfc226c00-0xfc226fff]
[ 0.301398] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.301403] pci 0000:00:1a.7: PME# disabled
[ 0.301433] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.301454] pci 0000:00:1b.0: reg 10: [mem 0xfc020000-0xfc023fff 64bit]
[ 0.301529] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.301533] pci 0000:00:1b.0: PME# disabled
[ 0.301561] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.301639] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.301643] pci 0000:00:1c.0: PME# disabled
[ 0.301672] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.301750] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.301755] pci 0000:00:1c.1: PME# disabled
[ 0.301785] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.301863] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.301867] pci 0000:00:1c.3: PME# disabled
[ 0.301897] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 0.301975] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.301980] pci 0000:00:1c.4: PME# disabled
[ 0.302013] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.302068] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df]
[ 0.304077] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.304132] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff]
[ 0.304189] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.304244] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f]
[ 0.304312] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.304337] pci 0000:00:1d.7: reg 10: [mem 0xfc227000-0xfc2273ff]
[ 0.304424] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.304429] pci 0000:00:1d.7: PME# disabled
[ 0.304454] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.304538] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.304689] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.304716] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f]
[ 0.304726] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f]
[ 0.304737] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47]
[ 0.304748] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b]
[ 0.304759] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
[ 0.304770] pci 0000:00:1f.2: reg 24: [mem 0xfc226000-0xfc2267ff]
[ 0.304818] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.304822] pci 0000:00:1f.2: PME# disabled
[ 0.304846] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.304867] pci 0000:00:1f.3: reg 10: [mem 0xfc227400-0xfc2274ff 64bit]
[ 0.304896] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
[ 0.304984] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.305045] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000]
(disabled)
[ 0.305050] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff]
(disabled)
[ 0.305058] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 0.305175] pci 0000:03:00.0: [8086:423b] type 0 class 0x000280
[ 0.305218] pci 0000:03:00.0: reg 10: [mem 0xf4300000-0xf4301fff 64bit]
[ 0.305381] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.305392] pci 0000:03:00.0: PME# disabled
[ 0.305461] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.305521] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000]
(disabled)
[ 0.305526] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff]
[ 0.305533] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 0.305589] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.305649] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.305654] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.305661] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff
64bit pref]
[ 0.305717] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.305778] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.305782] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.305790] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff
64bit pref]
[ 0.305835] pci 0000:15:00.0: [1180:0476] type 2 class 0x000607
[ 0.305858] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled
(via cardbus function)
[ 0.305930] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI
controller
[ 0.306017] pci 0000:15:00.0: reg 10: [mem 0xf4800000-0xf4800fff]
[ 0.306045] pci 0000:15:00.0: supports D1 D2
[ 0.306046] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306052] pci 0000:15:00.0: PME# disabled
[ 0.306076] pci 0000:15:00.1: [1180:0832] type 0 class 0x000c00
[ 0.306102] pci 0000:15:00.1: reg 10: [mem 0xf4801000-0xf48017ff]
[ 0.306201] pci 0000:15:00.1: supports D1 D2
[ 0.306203] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306208] pci 0000:15:00.1: PME# disabled
[ 0.306232] pci 0000:15:00.2: [1180:0822] type 0 class 0x000805
[ 0.306257] pci 0000:15:00.2: reg 10: [mem 0xf4801800-0xf48018ff]
[ 0.306357] pci 0000:15:00.2: supports D1 D2
[ 0.306359] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306364] pci 0000:15:00.2: PME# disabled
[ 0.306391] pci 0000:15:00.4: [1180:0592] type 0 class 0x000880
[ 0.306416] pci 0000:15:00.4: reg 10: [mem 0xf4802000-0xf48020ff]
[ 0.306515] pci 0000:15:00.4: supports D1 D2
[ 0.306517] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306522] pci 0000:15:00.4: PME# disabled
[ 0.306546] pci 0000:15:00.5: [1180:0852] type 0 class 0x000880
[ 0.306571] pci 0000:15:00.5: reg 10: [mem 0xf4802400-0xf48024ff]
[ 0.306671] pci 0000:15:00.5: supports D1 D2
[ 0.306672] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306678] pci 0000:15:00.5: PME# disabled
[ 0.306748] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive
decode)
[ 0.306811] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
[ 0.306816] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff]
[ 0.306823] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff
64bit pref]
[ 0.306826] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.306828] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.306830] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 0.306833] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff]
(subtractive decode)
[ 0.306835] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff]
(subtractive decode)
[ 0.306837] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff]
(subtractive decode)
[ 0.306840] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff]
(subtractive decode)
[ 0.306921] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.307036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.307066] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.307097] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.307129] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.307161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.307419] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.307822] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.312217] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.312604] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.313122] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.313640] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.314158] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.314675] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.316133] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.316651] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.317211] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.317211] vgaarb: loaded
[ 0.317211] vgaarb: bridge control possible 0000:00:02.0
[ 0.317211] PCI: Using ACPI for IRQ routing
[ 0.318351] PCI: pci_cache_line_size set to 64 bytes
[ 0.320143] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.320145] reserve RAM buffer: 00000000bd4a1000 - 00000000bfffffff
[ 0.320150] reserve RAM buffer: 00000000bd5b7000 - 00000000bfffffff
[ 0.320154] reserve RAM buffer: 00000000bd6c6000 - 00000000bfffffff
[ 0.320158] reserve RAM buffer: 00000000bda00000 - 00000000bfffffff
[ 0.320215] NetLabel: Initializing
[ 0.320215] NetLabel: domain hash size = 128
[ 0.320215] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.320228] NetLabel: unlabeled traffic allowed by default
[ 0.320290] HPET: 4 timers in total, 0 timers will be used for per-cpu
timer
[ 0.320354] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.320613] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.328092] Switching to clocksource hpet
[ 0.329494] pnp: PnP ACPI init
[ 0.329504] ACPI: bus type pnp registered
[ 0.349759] Switched to NOHz mode on CPU #0
[ 0.349761] Switched to NOHz mode on CPU #1
[ 0.349920] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.349922] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.349924] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.349925] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.349927] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.349929] pnp 00:00: [mem 0x000d0000-0x000cffff disabled]
[ 0.349931] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.349933] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.349935] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.349936] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.349938] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.349940] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.349941] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.349943] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.349945] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.349947] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.349948] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.350033] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.350095] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.350156] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.350216] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.350278] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.350339] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.350399] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.350460] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.350520] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.350581] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.350642] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.350702] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.350763] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.350823] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.350885] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.350903] pnp 00:01: [bus 00-ff]
[ 0.350905] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.350907] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.350909] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.350911] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.350913] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.350915] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.350917] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.350919] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.350921] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.350924] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.350926] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.350928] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.350930] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.350932] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.350934] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.350936] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.350938] pnp 00:01: [mem 0xc0000000-0xfebfffff window]
[ 0.350940] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
[ 0.351014] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 0.370932] pnp 00:02: [io 0x0010-0x001f]
[ 0.370935] pnp 00:02: [io 0x0090-0x009f]
[ 0.370936] pnp 00:02: [io 0x0024-0x0025]
[ 0.370938] pnp 00:02: [io 0x0028-0x0029]
[ 0.370939] pnp 00:02: [io 0x002c-0x002d]
[ 0.370941] pnp 00:02: [io 0x0030-0x0031]
[ 0.370943] pnp 00:02: [io 0x0034-0x0035]
[ 0.370944] pnp 00:02: [io 0x0038-0x0039]
[ 0.370946] pnp 00:02: [io 0x003c-0x003d]
[ 0.370947] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.370949] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.370951] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.370952] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.370954] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.370955] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.370957] pnp 00:02: [io 0x0050-0x0053]
[ 0.370959] pnp 00:02: [io 0x0072-0x0077]
[ 0.370960] pnp 00:02: [io 0x002e-0x002f]
[ 0.370962] pnp 00:02: [io 0x1000-0x107f]
[ 0.370963] pnp 00:02: [io 0x1180-0x11ff]
[ 0.370965] pnp 00:02: [io 0x0800-0x080f]
[ 0.370967] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.370968] pnp 00:02: [io 0x1600-0x167f]
[ 0.370970] pnp 00:02: [io 0x1680-0x169f]
[ 0.370972] pnp 00:02: [mem 0xe0000000-0xefffffff]
[ 0.370974] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.370975] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 0.370977] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.370979] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.370980] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.371078] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.371138] system 00:02: [io 0x1180-0x11ff] has been reserved
[ 0.371197] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.371256] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.371315] system 00:02: [io 0x1600-0x167f] has been reserved
[ 0.371374] system 00:02: [io 0x1680-0x169f] has been reserved
[ 0.371434] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.371494] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.371554] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.371614] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.371675] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.371735] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.371795] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.371833] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.371884] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.371893] pnp 00:04: [io 0x0000-0x000f]
[ 0.371897] pnp 00:04: [io 0x0080-0x008f]
[ 0.371899] pnp 00:04: [io 0x00c0-0x00df]
[ 0.371901] pnp 00:04: [dma 4]
[ 0.371953] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.371962] pnp 00:05: [io 0x0061]
[ 0.372036] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.372045] pnp 00:06: [io 0x00f0]
[ 0.372051] pnp 00:06: [irq 13]
[ 0.372104] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.372113] pnp 00:07: [io 0x0070-0x0071]
[ 0.372117] pnp 00:07: [irq 8]
[ 0.372168] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.372177] pnp 00:08: [io 0x0060]
[ 0.372178] pnp 00:08: [io 0x0064]
[ 0.372183] pnp 00:08: [irq 1]
[ 0.372236] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.372248] pnp 00:09: [irq 12]
[ 0.372299] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13
(active)
[ 0.392258] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.392327] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.392781] pnp: PnP ACPI: found 11 devices
[ 0.392838] ACPI: ACPI bus type pnp unregistered
[ 0.401303] PCI: max bus depth: 2 pci_try_num: 3
[ 0.401356] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff
64bit pref]
[ 0.401430] pci 0000:00:1c.1: BAR 13: assigned [io 0x8000-0x8fff]
[ 0.401491] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0200000-0xc03fffff]
[ 0.401553] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0400000-0xc05fffff
64bit pref]
[ 0.401625] pci 0000:00:1c.0: BAR 13: assigned [io 0x9000-0x9fff]
[ 0.401685] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.401744] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.401807] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.401869] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc05fffff
64bit pref]
[ 0.401946] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.402005] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff]
[ 0.402068] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff]
[ 0.402130] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff
64bit pref]
[ 0.402206] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.402265] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.402328] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.402390] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff
64bit pref]
[ 0.402466] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.402525] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.402588] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.402651] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff
64bit pref]
[ 0.402728] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff
pref]
[ 0.402801] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[ 0.402861] pci 0000:15:00.0: BAR 13: assigned [io 0x4000-0x40ff]
[ 0.402921] pci 0000:15:00.0: BAR 14: assigned [io 0x4400-0x44ff]
[ 0.402980] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.403038] pci 0000:15:00.0: bridge window [io 0x4000-0x40ff]
[ 0.403100] pci 0000:15:00.0: bridge window [io 0x4400-0x44ff]
[ 0.403163] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff
pref]
[ 0.403236] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
[ 0.403300] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.403358] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
[ 0.403421] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff]
[ 0.403484] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff
64bit pref]
[ 0.403568] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.405320] pci 0000:00:1c.0: setting latency timer to 64
[ 0.405329] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.405392] pci 0000:00:1c.1: setting latency timer to 64
[ 0.405400] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.405462] pci 0000:00:1c.3: setting latency timer to 64
[ 0.405469] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.405531] pci 0000:00:1c.4: setting latency timer to 64
[ 0.405539] pci 0000:00:1e.0: setting latency timer to 64
[ 0.405548] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.405612] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.405614] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.405617] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.405619] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.405621] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.405623] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.405625] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.405627] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.405629] pci_bus 0000:02: resource 1 [mem 0xc0200000-0xc03fffff]
[ 0.405631] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc05fffff 64bit
pref]
[ 0.405633] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
[ 0.405636] pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff]
[ 0.405638] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc01fffff 64bit
pref]
[ 0.405640] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.405642] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.405644] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit
pref]
[ 0.405646] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.405648] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.405650] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit
pref]
[ 0.405653] pci_bus 0000:15: resource 0 [io 0x4000-0x7fff]
[ 0.405655] pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff]
[ 0.405657] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit
pref]
[ 0.405659] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
[ 0.405661] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
[ 0.405663] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.405665] pci_bus 0000:15: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.405667] pci_bus 0000:15: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.405669] pci_bus 0000:15: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.405671] pci_bus 0000:15: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.405673] pci_bus 0000:16: resource 0 [io 0x4000-0x40ff]
[ 0.405675] pci_bus 0000:16: resource 1 [io 0x4400-0x44ff]
[ 0.405677] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[ 0.405679] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
[ 0.405714] NET: Registered protocol family 2
[ 0.405889] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.407150] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[ 0.410394] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.410917] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.410977] TCP reno registered
[ 0.411041] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.411134] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.411354] NET: Registered protocol family 1
[ 0.411428] pci 0000:00:02.0: Boot video device
[ 0.411443] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.411445] pci 0000:00:1a.0: Performing full reset
[ 0.411465] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.411467] pci 0000:00:1a.1: Performing full reset
[ 0.411487] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.411489] pci 0000:00:1a.2: Performing full reset
[ 0.411553] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.411554] pci 0000:00:1d.0: Performing full reset
[ 0.411574] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.411576] pci 0000:00:1d.1: Performing full reset
[ 0.411595] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.411597] pci 0000:00:1d.2: Performing full reset
[ 0.411667] PCI: CLS 64 bytes, default 64
[ 0.411714] Trying to unpack rootfs image as initramfs...
[ 0.413879] rootfs image is not initramfs (no cpio magic); looks like an
initrd
[ 0.415298] Freeing initrd memory: 1280k freed
[ 0.415575] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.415635] Placing 64MB software IO TLB between ffff8800b94a1000 -
ffff8800bd4a1000
[ 0.415706] software IO TLB at phys 0xb94a1000 - 0xbd4a1000
[ 0.415777] Simple Boot Flag at 0x35 set to 0x1
[ 0.416820] audit: initializing netlink socket (disabled)
[ 0.416886] type=2000 audit(1309442452.412:1): initialized
[ 0.427792] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.450533] VFS: Disk quotas dquot_6.5.2
[ 0.450684] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.450851] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.450967] msgmni has been set to 7717
[ 0.451363] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.451434] io scheduler noop registered
[ 0.451490] io scheduler deadline registered (default)
[ 0.451687] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.451738] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.451931] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.451979] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.452212] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.452260] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.452448] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.452496] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.452769] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.452833] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.452853] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.452914] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.452976] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.452997] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.453059] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.453079] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.453142] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.453266] intel_idle: MWAIT substates: 0x3122220
[ 0.453268] intel_idle: does not run on family 6 model 23
[ 0.453349] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.453590] ACPI: Lid Switch [LID]
[ 0.453717] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.453791] ACPI: Sleep Button [SLPB]
[ 0.453934] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.454006] ACPI: Power Button [PWRF]
[ 0.454108] ERST: Table is not found!
[ 0.485221] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.616417] Linux agpgart interface v0.103
[ 0.616622] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.616800] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total,
262144K mappable
[ 0.618586] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.618851] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.619021] [drm] Initialized drm 1.1.0 20060810
[ 0.619121] [drm] radeon defaulting to userspace modesetting.
[ 0.620274] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.620335] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.620398] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.620459] i915 0000:00:02.0: setting latency timer to 64
[ 0.675899] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 0.675904] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.675966] [drm] Driver supports precise vblank timestamp query.
[ 0.676083] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.042814] fbcon: inteldrmfb (fb0) is primary device
[ 1.093840] Console: switching to colour frame buffer device 180x56
[ 1.098388] fb0: inteldrmfb frame buffer device
[ 1.098418] drm: registered panic notifier
[ 1.205736] acpi device:02: registered as cooling_device0
[ 1.205888] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.205949] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.206061] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor
0
[ 1.208171] brd: module loaded
[ 1.208300] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
0x60,0x64 irq 1,12
[ 1.217066] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.217126] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.217361] mousedev: PS/2 mouse device common for all mice
[ 1.217459] rtc_cmos 00:07: RTC can wake from S4
[ 1.217627] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.217694] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.217776] cpuidle: using governor ladder
[ 1.217804] cpuidle: using governor menu
[ 1.218043] TCP cubic registered
[ 1.218067] NET: Registered protocol family 17
[ 1.222637] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
[ 1.229355] registered taskstats version 1
[ 1.239418] rtc_cmos 00:07: setting system clock to 2011-06-30 14:00:54 UTC
(1309442454)
[ 1.239632] RAMDISK: lzo image found at block 0
[ 1.255180] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
[ 1.260894] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised:
[email protected]
[ 1.263514] Intel AES-NI instructions are not detected.
[ 1.276778] SCSI subsystem initialized
[ 1.281234] libata version 3.00 loaded.
[ 1.282347] ahci 0000:00:1f.2: version 3.0
[ 1.282362] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.284027] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.284068] ahci: SSS flag set, parallel bus scan disabled
[ 1.285674] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3
impl SATA mode
[ 1.287295] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio
slum part ccc sxs
[ 1.288958] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.289759] scsi0 : ahci
[ 1.291501] scsi1 : ahci
[ 1.293196] scsi2 : ahci
[ 1.294870] scsi3 : ahci
[ 1.296736] ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100
irq 45
[ 1.298307] ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180
irq 45
[ 1.299834] ata3: DUMMY
[ 1.301389] ata4: DUMMY
[ 1.412018] Refined TSC clocksource calibration: 2526.999 MHz.
[ 1.413544] Switching to clocksource tsc
[ 1.620017] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.631008] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.631011] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 1.632567] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 1.640103] ata1.00: ATA-8: OCZ-VERTEX2, 1.32, max UDMA/133
[ 1.641633] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.650104] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.650108] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 1.651662] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 1.660106] ata1.00: configured for UDMA/133
[ 1.661755] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.32
PQ: 0 ANSI: 5
[ 1.980017] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.984042] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.985060] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.985063] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 1.987703] ata2.00: ATAPI: Optiarc DVD RW AD-7910S, 1.D0, max UDMA/100
[ 1.992196] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.993298] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.993301] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 1.995939] ata2.00: configured for UDMA/100
[ 1.999858] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7910S 1.D0
PQ: 0 ANSI: 5
[ 2.002678] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240
GB/223 GiB)
[ 2.004373] sd 0:0:0:0: [sda] Write Protect is off
[ 2.006359] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.006379] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.008662] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 2.010754] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.031354] SGI XFS with ACLs, security attributes, large block/inode
numbers, no debug enabled
[ 2.033625] SGI XFS Quota Management subsystem
[ 6.328282] XFS (dm-0): Mounting Filesystem
[ 6.380374] XFS (dm-0): Ending clean mount
[ 6.382043] VFS: Mounted root (xfs filesystem) readonly on device 254:0.
[ 6.383711] Trying to move old root to /initrd ... okay
[ 6.386001] devtmpfs: mounted
[ 6.388579] Freeing unused kernel memory: 568k freed
[ 6.390409] Write protecting the kernel read-only data: 8192k
[ 6.397896] Freeing unused kernel memory: 1992k freed
[ 6.401055] Freeing unused kernel memory: 280k freed
[ 6.719905] usbcore: registered new interface driver usbfs
[ 6.719951] usbcore: registered new interface driver hub
[ 6.721649] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 6.721651] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 6.721685] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 6.721696] e1000e 0000:00:19.0: setting latency timer to 64
[ 6.721826] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 6.722267] usbcore: registered new device driver usb
[ 6.726571] ACPI: acpi_idle registered with cpuidle
[ 6.743745] Monitor-Mwait will be used to enter C-1 state
[ 6.746559] Monitor-Mwait will be used to enter C-2 state
[ 6.748047] Monitor-Mwait will be used to enter C-3 state
[ 6.748058] Marking TSC unstable due to TSC halts in idle
[ 6.748969] Switching to clocksource hpet
[ 6.752458] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.752461] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 6.752678] iTCO_vendor_support: vendor-support=0
[ 6.755801] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.755895] iTCO_wdt: Found a ICH9M-E TCO device (Version=2,
TCOBASE=0x1060)
[ 6.756058] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.780922] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.780925] ACPI: Thermal Zone [THM0] (49 C)
[ 6.791193] thermal LNXTHERM:01: registered as thermal_zone1
[ 6.791195] ACPI: Thermal Zone [THM1] (47 C)
[ 6.796430] cfg80211: Calling CRDA to update world regulatory domain
[ 6.796944] sdhci: Secure Digital Host Controller Interface driver
[ 6.796946] sdhci: Copyright(c) Pierre Ossman
[ 6.798191] firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 6.798885] wmi: Mapper loaded
[ 6.819807] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-
tree:d
[ 6.819809] iwlagn: Copyright(c) 2003-2011 Intel Corporation
[ 6.819886] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.819895] iwlagn 0000:03:00.0: setting latency timer to 64
[ 6.819926] iwlagn 0000:03:00.0: Detected Intel(R) WiMAX/WiFi Link 5350
AGN, REV=0x24
[ 6.842263] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.842906] Non-volatile memory driver v1.3
[ 6.844282] ACPI: AC Adapter [AC] (on-line)
[ 6.867197] firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI v1.10, 4
IR + 4 IT contexts, quirks 0x1
[ 6.867218] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev
21)
[ 6.867240] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 6.867371] tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6)
[ 6.867373] tpm_tis 00:0a: Intel iTPM workaround enabled
[ 6.868269] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW
doesn't fully claim to support it.
[ 6.868289] mmc0: no vmmc regulator found
[ 6.869309] Registered led device: mmc0::
[ 6.871047] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
[ 6.871426] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
[ 6.874314] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.874352] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.879866] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2
cdda tray
[ 6.879869] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.880022] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.899789] iwlagn 0000:03:00.0: device EEPROM VER=0x21e, CALIB=0x4
[ 6.899791] iwlagn 0000:03:00.0: Device SKU: 0Xb
[ 6.899793] iwlagn 0000:03:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
[ 6.899805] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a
channels
[ 6.899879] iwlagn 0000:03:00.0: irq 47 for MSI/MSI-X
[ 6.900174] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 6.900176] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.900178] thinkpad_acpi: ThinkPad BIOS 7UET91WW (3.21 ), EC 7VHT16WW-1.06
[ 6.900180] thinkpad_acpi: Lenovo ThinkPad T400, model 2764CTO
[ 6.965596] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1)
00:21:86:a2:19:06
[ 6.965600] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 6.965873] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 6.965903] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 6.965908] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 6.965918] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ
23
[ 6.965963] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 6.965967] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 6.965988] drivers/usb/core/inode.c: creating file 'devices'
[ 6.965992] drivers/usb/core/inode.c: creating file '001'
[ 6.965996] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 6.966007] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3
pcc=2 ordered !ppc ports=6
[ 6.966011] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes
1024 64 bit addr hw prefetch
[ 6.966045] ehci_hcd 0000:00:1a.7: debug port 1
[ 6.966049] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 6.969954] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 6.969956] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 6.969979] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
[ 6.969984] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 6.973856] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1
period=1024 RUN
[ 6.984185] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 6.984215] usb usb1: default language 0x0409
[ 6.984221] usb usb1: udev 1, busnum 1, minor = 0
[ 6.984223] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.984225] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.984227] usb usb1: Product: EHCI Host Controller
[ 6.984229] usb usb1: Manufacturer: Linux 3.0.0-rc4-00059-g143e859 ehci_hcd
[ 6.984231] usb usb1: SerialNumber: 0000:00:1a.7
[ 6.984333] usb usb1: usb_probe_device
[ 6.984336] usb usb1: configuration #1 chosen from 1 choice
[ 6.984345] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 6.984366] hub 1-0:1.0: usb_probe_interface
[ 6.984368] hub 1-0:1.0: usb_probe_interface - got id
[ 6.984370] hub 1-0:1.0: USB hub found
[ 6.984374] hub 1-0:1.0: 6 ports detected
[ 6.984376] hub 1-0:1.0: standalone hub
[ 6.984377] hub 1-0:1.0: no power switching (usb 1.0)
[ 6.984379] hub 1-0:1.0: individual port over-current protection
[ 6.984381] hub 1-0:1.0: power on to power good time: 20ms
[ 6.984384] hub 1-0:1.0: local power source is good
[ 6.984386] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 6.984435] drivers/usb/core/inode.c: creating file '001'
[ 6.984501] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 6.984701] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 6.984729] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.996884] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0888, PCI irq 16
[ 6.996888] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[ 6.996893] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window:
[io 0x4000-0x7fff]
[ 6.996896] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window:
[mem 0xf4800000-0xf7ffffff]
[ 6.996899] pcmcia_socket pcmcia_socket0: cs: memory probe
0xf4800000-0xf7ffffff: excluding 0xf4800000-0xf4b7ffff
[ 6.996912] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window:
[mem 0xf0000000-0xf3ffffff 64bit pref]
[ 6.996915] pcmcia_socket pcmcia_socket0: cs: memory probe
0xf0000000-0xf3ffffff: excluding 0xf0000000-0xf3ffffff
[ 7.015659] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 7.027652] Monitor-Mwait will be used to enter C-3 state
[ 7.029229] thinkpad_acpi: radio switch found; radios are enabled
[ 7.032893] ACPI: Battery Slot [BAT0] (battery present)
[ 7.037110] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is
unblocked
[ 7.070128] ALSA sound/pci/hda/hda_codec.c:3771 hda_codec: model 'laptop'
is selected
[ 7.070186] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 7.077845] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 7.078559] Registered led device: tpacpi::thinklight
[ 7.078592] Registered led device: tpacpi::power
[ 7.078607] Registered led device: tpacpi::standby
[ 7.078621] Registered led device: tpacpi::thinkvantage
[ 7.084062] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 7.084067] hub 1-0:1.0: port 1: status 0501 change 0001
[ 7.084081] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 7.084084] hub 1-0:1.0: port 4: status 0501 change 0001
[ 7.084093] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 7.084096] hub 1-0:1.0: port 6: status 0501 change 0001
[ 7.085743] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.085858] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.085921] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.086459] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 7.086659] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 7.086688] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 7.086699] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ
19
[ 7.086741] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7.086744] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.086750] thinkpad_acpi: Standard ACPI backlight interface available, not
loading native one
[ 7.086754] drivers/usb/core/inode.c: creating file '002'
[ 7.086760] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 7.086770] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3
pcc=2 ordered !ppc ports=6
[ 7.086775] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes
1024 64 bit addr hw prefetch
[ 7.086805] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.086810] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 7.086820] thinkpad_acpi: Console audio control enabled, mode: override
(read/write)
[ 7.088093] input: ThinkPad Extra Buttons as
/devices/platform/thinkpad_acpi/input/input10
[ 7.090836] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 7.090838] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 7.090857] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
[ 7.090861] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 7.094735] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1
period=1024 RUN
[ 7.104088] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 7.108123] usb usb2: default language 0x0409
[ 7.108129] usb usb2: udev 1, busnum 2, minor = 128
[ 7.108131] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.108133] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.108136] usb usb2: Product: EHCI Host Controller
[ 7.108137] usb usb2: Manufacturer: Linux 3.0.0-rc4-00059-g143e859 ehci_hcd
[ 7.108139] usb usb2: SerialNumber: 0000:00:1d.7
[ 7.108371] usb usb2: usb_probe_device
[ 7.108374] usb usb2: configuration #1 chosen from 1 choice
[ 7.108382] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 7.108405] hub 2-0:1.0: usb_probe_interface
[ 7.108406] hub 2-0:1.0: usb_probe_interface - got id
[ 7.108409] hub 2-0:1.0: USB hub found
[ 7.108413] hub 2-0:1.0: 6 ports detected
[ 7.108414] hub 2-0:1.0: standalone hub
[ 7.108416] hub 2-0:1.0: no power switching (usb 1.0)
[ 7.108418] hub 2-0:1.0: individual port over-current protection
[ 7.108419] hub 2-0:1.0: power on to power good time: 20ms
[ 7.108423] hub 2-0:1.0: local power source is good
[ 7.108425] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 7.108481] drivers/usb/core/inode.c: creating file '001'
[ 7.174002] iwlagn 0000:03:00.0: loaded firmware version 8.83.5.1 build
33692
[ 7.174385] Registered led device: phy0-led
[ 7.184052] hub 1-0:1.0: state 7 ports 6 chg 0052 evt 0000
[ 7.184074] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 7.190076] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.190134] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 7.190137] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 7.190147] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 7.190156] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 7.190159] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 7.190166] drivers/usb/core/inode.c: creating file '003'
[ 7.190172] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 7.190183] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 7.190188] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.190190] uhci_hcd 0000:00:1a.0: Performing full reset
[ 7.190206] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 7.190228] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 7.190269] usb usb3: default language 0x0409
[ 7.190275] usb usb3: udev 1, busnum 3, minor = 256
[ 7.190277] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.190279] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.190281] usb usb3: Product: UHCI Host Controller
[ 7.190283] usb usb3: Manufacturer: Linux 3.0.0-rc4-00059-g143e859 uhci_hcd
[ 7.190284] usb usb3: SerialNumber: 0000:00:1a.0
[ 7.190409] usb usb3: usb_probe_device
[ 7.190412] usb usb3: configuration #1 chosen from 1 choice
[ 7.190419] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 7.190441] hub 3-0:1.0: usb_probe_interface
[ 7.190443] hub 3-0:1.0: usb_probe_interface - got id
[ 7.190446] hub 3-0:1.0: USB hub found
[ 7.190449] hub 3-0:1.0: 2 ports detected
[ 7.190451] hub 3-0:1.0: standalone hub
[ 7.190453] hub 3-0:1.0: no power switching (usb 1.0)
[ 7.190454] hub 3-0:1.0: individual port over-current protection
[ 7.190456] hub 3-0:1.0: power on to power good time: 2ms
[ 7.190460] hub 3-0:1.0: local power source is good
[ 7.190462] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 7.190500] drivers/usb/core/inode.c: creating file '001'
[ 7.190530] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
[ 7.190555] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[ 7.190561] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 7.190565] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 7.190569] drivers/usb/core/inode.c: creating file '004'
[ 7.190572] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 7.190581] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 7.190589] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.190591] uhci_hcd 0000:00:1a.1: Performing full reset
[ 7.190618] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 7.190654] usb usb4: default language 0x0409
[ 7.190659] usb usb4: udev 1, busnum 4, minor = 384
[ 7.190661] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.190663] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.190665] usb usb4: Product: UHCI Host Controller
[ 7.190667] usb usb4: Manufacturer: Linux 3.0.0-rc4-00059-g143e859 uhci_hcd
[ 7.190669] usb usb4: SerialNumber: 0000:00:1a.1
[ 7.190734] usb usb4: usb_probe_device
[ 7.190737] usb usb4: configuration #1 chosen from 1 choice
[ 7.190743] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 7.190767] hub 4-0:1.0: usb_probe_interface
[ 7.190769] hub 4-0:1.0: usb_probe_interface - got id
[ 7.190771] hub 4-0:1.0: USB hub found
[ 7.190774] hub 4-0:1.0: 2 ports detected
[ 7.190776] hub 4-0:1.0: standalone hub
[ 7.190777] hub 4-0:1.0: no power switching (usb 1.0)
[ 7.190779] hub 4-0:1.0: individual port over-current protection
[ 7.190781] hub 4-0:1.0: power on to power good time: 2ms
[ 7.190784] hub 4-0:1.0: local power source is good
[ 7.190786] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 7.190828] drivers/usb/core/inode.c: creating file '001'
[ 7.190861] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
[ 7.190879] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 7.190882] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 7.190890] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ
22
[ 7.190896] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 7.190900] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 7.190905] drivers/usb/core/inode.c: creating file '005'
[ 7.190908] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
number 5
[ 7.190916] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 7.190921] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.190923] uhci_hcd 0000:00:1a.2: Performing full reset
[ 7.190940] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 7.190954] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 7.190988] usb usb5: default language 0x0409
[ 7.190993] usb usb5: udev 1, busnum 5, minor = 512
[ 7.190995] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.190998] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.191000] usb usb5: Product: UHCI Host Controller
[ 7.191001] usb usb5: Manufacturer: Linux 3.0.0-rc4-00059-g143e859 uhci_hcd
[ 7.191003] usb usb5: SerialNumber: 0000:00:1a.2
[ 7.191069] usb usb5: usb_probe_device
[ 7.191072] usb usb5: configuration #1 chosen from 1 choice
[ 7.191077] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 7.191099] hub 5-0:1.0: usb_probe_interface
[ 7.191101] hub 5-0:1.0: usb_probe_interface - got id
[ 7.191103] hub 5-0:1.0: USB hub found
[ 7.191106] hub 5-0:1.0: 2 ports detected
[ 7.191108] hub 5-0:1.0: standalone hub
[ 7.191109] hub 5-0:1.0: no power switching (usb 1.0)
[ 7.191111] hub 5-0:1.0: individual port over-current protection
[ 7.191113] hub 5-0:1.0: power on to power good time: 2ms
[ 7.191116] hub 5-0:1.0: local power source is good
[ 7.191118] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 7.191150] drivers/usb/core/inode.c: creating file '001'
[ 7.191179] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
[ 7.191198] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 7.191200] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 7.191205] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 7.191211] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7.191214] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.191218] drivers/usb/core/inode.c: creating file '006'
[ 7.191222] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 6
[ 7.191229] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 7.191234] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.191236] uhci_hcd 0000:00:1d.0: Performing full reset
[ 7.191251] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 7.191257] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 7.191292] usb usb6: default language 0x0409
[ 7.191297] usb usb6: udev 1, busnum 6, minor = 640
[ 7.191299] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.191301] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.191303] usb usb6: Product: UHCI Host Controller
[ 7.191305] usb usb6: Manufacturer: Linux 3.0.0-rc4-00059-g143e859 uhci_hcd
[ 7.191307] usb usb6: SerialNumber: 0000:00:1d.0
[ 7.191370] usb usb6: usb_probe_device
[ 7.191373] usb usb6: configuration #1 chosen from 1 choice
[ 7.191379] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 7.191398] hub 6-0:1.0: usb_probe_interface
[ 7.191400] hub 6-0:1.0: usb_probe_interface - got id
[ 7.191402] hub 6-0:1.0: USB hub found
[ 7.191406] hub 6-0:1.0: 2 ports detected
[ 7.191407] hub 6-0:1.0: standalone hub
[ 7.191409] hub 6-0:1.0: no power switching (usb 1.0)
[ 7.191410] hub 6-0:1.0: individual port over-current protection
[ 7.191412] hub 6-0:1.0: power on to power good time: 2ms
[ 7.191415] hub 6-0:1.0: local power source is good
[ 7.191421] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 7.191455] drivers/usb/core/inode.c: creating file '001'
[ 7.191485] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 7.191500] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 7.191506] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7.191509] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.191514] drivers/usb/core/inode.c: creating file '007'
[ 7.191517] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 7
[ 7.191526] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 7.191531] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.191533] uhci_hcd 0000:00:1d.1: Performing full reset
[ 7.191553] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 7.191588] usb usb7: default language 0x0409
[ 7.191593] usb usb7: udev 1, busnum 7, minor = 768
[ 7.191595] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.191597] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.191599] usb usb7: Product: UHCI Host Controller
[ 7.191601] usb usb7: Manufacturer: Linux 3.0.0-rc4-00059-g143e859 uhci_hcd
[ 7.191602] usb usb7: SerialNumber: 0000:00:1d.1
[ 7.191667] usb usb7: usb_probe_device
[ 7.191669] usb usb7: configuration #1 chosen from 1 choice
[ 7.191675] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 7.191693] hub 7-0:1.0: usb_probe_interface
[ 7.191695] hub 7-0:1.0: usb_probe_interface - got id
[ 7.191697] hub 7-0:1.0: USB hub found
[ 7.191700] hub 7-0:1.0: 2 ports detected
[ 7.191702] hub 7-0:1.0: standalone hub
[ 7.191704] hub 7-0:1.0: no power switching (usb 1.0)
[ 7.191705] hub 7-0:1.0: individual port over-current protection
[ 7.191707] hub 7-0:1.0: power on to power good time: 2ms
[ 7.191710] hub 7-0:1.0: local power source is good
[ 7.191712] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 7.191748] drivers/usb/core/inode.c: creating file '001'
[ 7.191781] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 7.191796] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 7.191802] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7.191805] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.191810] drivers/usb/core/inode.c: creating file '008'
[ 7.191813] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 8
[ 7.191822] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 7.191827] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.191829] uhci_hcd 0000:00:1d.2: Performing full reset
[ 7.191847] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 7.191880] usb usb8: default language 0x0409
[ 7.191885] usb usb8: udev 1, busnum 8, minor = 896
[ 7.191887] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.191889] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.191891] usb usb8: Product: UHCI Host Controller
[ 7.191893] usb usb8: Manufacturer: Linux 3.0.0-rc4-00059-g143e859 uhci_hcd
[ 7.191895] usb usb8: SerialNumber: 0000:00:1d.2
[ 7.191957] usb usb8: usb_probe_device
[ 7.191959] usb usb8: configuration #1 chosen from 1 choice
[ 7.191965] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 7.191986] hub 8-0:1.0: usb_probe_interface
[ 7.191988] hub 8-0:1.0: usb_probe_interface - got id
[ 7.191990] hub 8-0:1.0: USB hub found
[ 7.191993] hub 8-0:1.0: 2 ports detected
[ 7.191995] hub 8-0:1.0: standalone hub
[ 7.191996] hub 8-0:1.0: no power switching (usb 1.0)
[ 7.195305] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 7.195542] hub 8-0:1.0: individual port over-current protection
[ 7.195545] hub 8-0:1.0: power on to power good time: 2ms
[ 7.195550] hub 8-0:1.0: local power source is good
[ 7.195552] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 7.197246] drivers/usb/core/inode.c: creating file '001'
[ 7.197291] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 7.208086] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 7.208090] hub 2-0:1.0: port 4: status 0501 change 0001
[ 7.221238] udevd[1440]: renamed network interface wlan0 to eth1
[ 7.244259] ehci_hcd 0000:00:1a.7: port 1 full speed --> companion
[ 7.244666] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003801 0 ACK
POWER OWNER sig=j CONNECT
[ 7.244692] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
[ 7.288048] uhci_hcd 0000:00:1a.0: port 1 portsc 0093,00
[ 7.288054] hub 3-0:1.0: port 1: status 0101 change 0001
[ 7.288080] uhci_hcd 0000:00:1a.1: port 2 portsc 0082,00
[ 7.288099] uhci_hcd 0000:00:1a.2: port 2 portsc 0082,00
[ 7.288133] uhci_hcd 0000:00:1d.1: port 2 portsc 0082,00
[ 7.304065] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0 ACK
POWER OWNER sig=se0 CSC
[ 7.304091] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 7.364259] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion
[ 7.364264] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003801 0 ACK
POWER OWNER sig=j CONNECT
[ 7.364268] hub 1-0:1.0: port 4 not reset yet, waiting 50ms
[ 7.368212] firewire_core: created device fw0: GUID 00061b032a347baa, S400
[ 7.420063] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK
POWER OWNER sig=se0 CSC
[ 7.420086] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 7.476264] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 7.476267] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 7.532062] usb 1-6: new high speed USB device number 4 using ehci_hcd
[ 7.588384] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 7.588388] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 7.671538] usb 1-6: skipped 1 descriptor after configuration
[ 7.671541] usb 1-6: skipped 5 descriptors after interface
[ 7.671543] usb 1-6: skipped 1 descriptor after endpoint
[ 7.671545] usb 1-6: skipped 9 descriptors after interface
[ 7.671922] usb 1-6: default language 0x0409
[ 7.675642] usb 1-6: udev 4, busnum 1, minor = 3
[ 7.675644] usb 1-6: New USB device found, idVendor=17ef, idProduct=1004
[ 7.675647] usb 1-6: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
[ 7.675648] usb 1-6: Product: Integrated Camera
[ 7.675650] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd.
[ 7.675652] usb 1-6: SerialNumber: SN0001
[ 7.675716] usb 1-6: usb_probe_device
[ 7.675726] usb 1-6: configuration #1 chosen from 1 choice
[ 7.675911] usb 1-6: adding 1-6:1.0 (config #1, interface 0)
[ 7.677186] usb 1-6: adding 1-6:1.1 (config #1, interface 1)
[ 7.677237] drivers/usb/core/inode.c: creating file '004'
[ 7.677255] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010
[ 7.677262] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 7.677267] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 7.677271] hub 2-0:1.0: state 7 ports 6 chg 0010 evt 0000
[ 7.677277] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 7.681373] Linux media interface: v0.10
[ 7.685763] Linux video capture interface: v2.00
[ 7.688175] uvcvideo 1-6:1.0: usb_probe_interface
[ 7.688178] uvcvideo 1-6:1.0: usb_probe_interface - got id
[ 7.688200] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004)
[ 7.707458] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps:
0xd04791/0xb00000/0x20000
[ 7.707463] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 7.724879] input: Integrated Camera as
/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input11
[ 7.724940] usbcore: registered new interface driver uvcvideo
[ 7.724941] USB Video Class driver (v1.1.0)
[ 7.726599] usb 1-6: link qh4-0001/ffff88012f2b3a80 start 1 [1/0 us]
[ 7.726637] usb 1-6: unlink qh4-0001/ffff88012f2b3a80 start 1 [1/0 us]
[ 7.732263] ehci_hcd 0000:00:1d.7: port 4 high speed
[ 7.732267] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 7.751599] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input12
[ 7.788065] usb 2-4: new high speed USB device number 2 using ehci_hcd
[ 7.848262] ehci_hcd 0000:00:1d.7: port 4 high speed
[ 7.848267] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 7.977437] usb 2-4: skipped 3 descriptors after interface
[ 7.977439] usb 2-4: skipped 4 descriptors after interface
[ 7.977442] usb 2-4: skipped 4 descriptors after interface
[ 7.977445] usb 2-4: skipped 2 descriptors after interface
[ 7.977447] usb 2-4: skipped 2 descriptors after interface
[ 7.977449] usb 2-4: skipped 5 descriptors after interface
[ 7.977452] usb 2-4: skipped 4 descriptors after interface
[ 7.986046] usb 2-4: skipped 3 descriptors after interface
[ 7.986048] usb 2-4: skipped 4 descriptors after interface
[ 7.986051] usb 2-4: skipped 4 descriptors after interface
[ 7.986053] usb 2-4: skipped 2 descriptors after interface
[ 7.986055] usb 2-4: skipped 2 descriptors after interface
[ 7.986058] usb 2-4: skipped 5 descriptors after interface
[ 7.986147] usb 2-4: default language 0x0409
[ 7.990174] usb 2-4: udev 2, busnum 2, minor = 129
[ 7.990176] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
[ 7.990178] usb 2-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 7.990180] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard
Composite Device
[ 7.990182] usb 2-4: Manufacturer: Ericsson
[ 7.990184] usb 2-4: SerialNumber: 3541430228088360
[ 7.990261] usb 2-4: usb_probe_device
[ 7.990264] usb 2-4: configuration #1 chosen from 2 choices
[ 7.992812] usb 2-4: adding 2-4:1.0 (config #1, interface 0)
[ 7.993061] usb 2-4: adding 2-4:1.1 (config #1, interface 1)
[ 8.011947] usb 2-4: adding 2-4:1.2 (config #1, interface 2)
[ 8.014325] usb 2-4: adding 2-4:1.3 (config #1, interface 3)
[ 8.016308] usb 2-4: adding 2-4:1.4 (config #1, interface 4)
[ 8.018188] usb 2-4: adding 2-4:1.5 (config #1, interface 5)
[ 8.020310] usb 2-4: adding 2-4:1.6 (config #1, interface 6)
[ 8.022314] usb 2-4: adding 2-4:1.7 (config #1, interface 7)
[ 8.024184] usb 2-4: adding 2-4:1.8 (config #1, interface 8)
[ 8.026037] usb 2-4: adding 2-4:1.9 (config #1, interface 9)
[ 8.028074] usb 2-4: adding 2-4:1.10 (config #1, interface 10)
[ 8.029968] drivers/usb/core/inode.c: creating file '002'
[ 8.029988] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 8.029998] hub 3-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 8.035841] cdc_wdm 2-4:1.5: usb_probe_interface
[ 8.035845] cdc_wdm 2-4:1.5: usb_probe_interface - got id
[ 8.035868] cdc_wdm 2-4:1.5: looking for a minor, starting at 0
[ 8.035951] cdc_wdm 2-4:1.5: cdc-wdm-176: USB WDM device
[ 8.035957] cdc_wdm 2-4:1.6: usb_probe_interface
[ 8.035959] cdc_wdm 2-4:1.6: usb_probe_interface - got id
[ 8.035962] cdc_wdm 2-4:1.6: looking for a minor, starting at 0
[ 8.035995] cdc_wdm 2-4:1.6: cdc-wdm-175: USB WDM device
[ 8.036026] usbcore: registered new interface driver cdc_wdm
[ 8.040399] cdc_acm 2-4:1.1: usb_probe_interface
[ 8.040403] cdc_acm 2-4:1.1: usb_probe_interface - got id
[ 8.040619] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
[ 8.041423] cdc_acm 2-4:1.3: usb_probe_interface
[ 8.041426] cdc_acm 2-4:1.3: usb_probe_interface - got id
[ 8.041548] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
[ 8.042032] cdc_acm 2-4:1.9: usb_probe_interface
[ 8.042035] cdc_acm 2-4:1.9: usb_probe_interface - got id
[ 8.042159] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
[ 8.042455] usbcore: registered new interface driver cdc_acm
[ 8.042457] cdc_acm: USB Abstract Control Model driver for USB modems and
ISDN adapters
[ 8.043801] cdc_ether 2-4:1.7: usb_probe_interface
[ 8.043804] cdc_ether 2-4:1.7: usb_probe_interface - got id
[ 8.047235] cdc_ether 2-4:1.7: wwan0: register 'cdc_ether' at
usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 8.047255] usbcore: registered new interface driver cdc_ether
[ 8.047880] usbcore: registered new interface driver zaurus
[ 8.144040] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 8.278004] usb 3-1: ep0 maxpacket = 8
[ 8.308275] usb 3-1: skipped 1 descriptor after interface
[ 8.308279] usb 3-1: skipped 1 descriptor after interface
[ 8.308281] usb 3-1: skipped 1 descriptor after interface
[ 8.311293] usb 3-1: default language 0x0409
[ 8.326541] usb 3-1: udev 2, busnum 3, minor = 257
[ 8.326544] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
[ 8.326546] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 8.326548] usb 3-1: Product: USB Receiver
[ 8.326549] usb 3-1: Manufacturer: Logitech
[ 8.326681] usb 3-1: usb_probe_device
[ 8.326684] usb 3-1: configuration #1 chosen from 1 choice
[ 8.331299] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[ 8.331335] usb 3-1: adding 3-1:1.1 (config #1, interface 1)
[ 8.331366] usb 3-1: adding 3-1:1.2 (config #1, interface 2)
[ 8.331423] drivers/usb/core/inode.c: creating file '002'
[ 8.331449] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 8.331458] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00
[ 8.331464] hub 4-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
[ 8.336021] usb usb8: suspend_rh (auto-stop)
[ 8.336024] usb usb6: suspend_rh (auto-stop)
[ 8.340393] usbhid 3-1:1.0: usb_probe_interface
[ 8.340396] usbhid 3-1:1.0: usb_probe_interface - got id
[ 8.343509] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input13
[ 8.343518] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase
4, 17 us
[ 8.343641] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11
Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
[ 8.343648] usbhid 3-1:1.1: usb_probe_interface
[ 8.343650] usbhid 3-1:1.1: usb_probe_interface - got id
[ 8.346653] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input14
[ 8.346658] uhci_hcd 0000:00:1a.0: reserve dev 2 ep82-INT, period 2, phase
1, 17 us
[ 8.346738] usbhid 3-1:1.1: looking for a minor, starting at 0
[ 8.346812] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID
v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
[ 8.346819] usbhid 3-1:1.2: usb_probe_interface
[ 8.346821] usbhid 3-1:1.2: usb_probe_interface - got id
[ 8.352300] usbhid 3-1:1.2: looking for a minor, starting at 0
[ 8.352411] generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11
Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input2
[ 8.352673] usbcore: registered new interface driver usbhid
[ 8.352675] usbhid: USB HID core driver
[ 8.456028] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status
0x101
[ 8.568083] usb 4-2: new full speed USB device number 2 using uhci_hcd
[ 8.584104] usb usb5: suspend_rh (auto-stop)
[ 8.584128] usb usb7: suspend_rh (auto-stop)
[ 8.720684] usb 4-2: skipped 1 descriptor after interface
[ 8.723676] usb 4-2: default language 0x0409
[ 8.734686] usb 4-2: udev 2, busnum 4, minor = 385
[ 8.734689] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145
[ 8.734691] usb 4-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 8.734693] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[ 8.734695] usb 4-2: Manufacturer: Lenovo Computer Corp
[ 8.734797] usb 4-2: usb_probe_device
[ 8.734800] usb 4-2: configuration #1 chosen from 1 choice
[ 8.736687] usb 4-2: adding 4-2:1.0 (config #1, interface 0)
[ 8.736739] usb 4-2: adding 4-2:1.1 (config #1, interface 1)
[ 8.736777] usb 4-2: adding 4-2:1.2 (config #1, interface 2)
[ 8.736816] usb 4-2: adding 4-2:1.3 (config #1, interface 3)
[ 8.736872] drivers/usb/core/inode.c: creating file '002'
[ 8.736894] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.736900] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.736904] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 8.747792] Bluetooth: Core ver 2.16
[ 8.748105] NET: Registered protocol family 31
[ 8.748107] Bluetooth: HCI device and connection manager initialized
[ 8.748109] Bluetooth: HCI socket layer initialized
[ 8.748111] Bluetooth: L2CAP socket layer initialized
[ 8.752045] Bluetooth: SCO socket layer initialized
[ 8.754120] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 8.754158] btusb 4-2:1.0: usb_probe_interface
[ 8.754161] btusb 4-2:1.0: usb_probe_interface - got id
[ 8.754655] btusb 4-2:1.2: usb_probe_interface
[ 8.754658] btusb 4-2:1.2: usb_probe_interface - got id
[ 8.754665] btusb 4-2:1.3: usb_probe_interface
[ 8.754667] btusb 4-2:1.3: usb_probe_interface - got id
[ 8.754807] usbcore: registered new interface driver btusb
[ 8.755143] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 1, phase
0, 23 us
[ 9.808088] hub 6-0:1.0: hub_suspend
[ 9.808107] usb usb6: bus auto-suspend
[ 9.808114] usb usb6: suspend_rh
[ 9.808143] hub 8-0:1.0: hub_suspend
[ 9.808152] usb usb8: bus auto-suspend
[ 9.808157] usb usb8: suspend_rh
[ 9.808198] usb 1-6: usb auto-suspend
[ 9.815284] NET: Registered protocol family 10
[ 9.962593] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 10.016117] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 10.017580] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.824051] hub 5-0:1.0: hub_suspend
[ 10.824069] usb usb5: bus auto-suspend
[ 10.824075] usb usb5: suspend_rh
[ 10.824102] hub 7-0:1.0: hub_suspend
[ 10.824110] usb usb7: bus auto-suspend
[ 10.824115] usb usb7: suspend_rh
[ 10.832694] uhci_hcd 0000:00:1a.1: release dev 2 ep81-INT, period 1, phase
0, 23 us
[ 11.824068] hub 1-0:1.0: hub_suspend
[ 11.824082] usb usb1: bus auto-suspend
[ 11.824088] ehci_hcd 0000:00:1a.7: suspend root hub
[ 13.439029] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 13.678040] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input15
[ 14.201308] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.452069] eth1: authenticate with 68:7f:74:0a:c4:b6 (try 1)
[ 17.453499] eth1: authenticated
[ 17.470652] eth1: associate with 68:7f:74:0a:c4:b6 (try 1)
[ 17.474636] eth1: RX AssocResp from 68:7f:74:0a:c4:b6 (capab=0x431 status=0
aid=1)
[ 17.474644] eth1: associated
[ 17.484772] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 17.495070] eth1: Wrong control channel in association response: configured
center-freq: 2437 hti-cfreq: 2417 hti->control_chan: 2 band: 0. Disabling
HT.
[ 24.327951] ------------[ cut here ]------------
[ 24.327958] WARNING: at kernel/printk.c:322 do_syslog+0x89/0x438()
[ 24.327960] Hardware name: 2764CTO
[ 24.327962] Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG
(deprecated).
[ 24.327964] Modules linked in: sch_sfq ipv6 ext2 mbcache md_mod
acpi_cpufreq mperf btusb bluetooth crc16 usbhid hid zaurus cdc_ether usbnet
cdc_acm mii cdc_wdm joydev uvcvideo videodev v4l2_compat_ioctl32 media
uhci_hcd arc4 snd_hda_codec_conexant pcmcia sg sr_mod battery cdrom psmouse
serio_raw thinkpad_acpi ac nvram pcspkr tpm_tis tpm tpm_bios yenta_socket
pcmcia_rsrc iwlagn pcmcia_core mac80211 wmi sdhci_pci firewire_ohci sdhci
cfg80211 firewire_core mmc_core i2c_i801 rfkill crc_itu_t thermal evdev
snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_timer snd iTCO_wdt soundcore
iTCO_vendor_support ehci_hcd snd_page_alloc processor e1000e usbcore xfs
sd_mod crc_t10dif ahci libahci libata scsi_mod cbc cryptd aes_x86_64
aes_generic dm_crypt dm_mod [last unloaded: scsi_wait_scan]
[ 24.328064] Pid: 2711, comm: syslog-ng Not tainted 3.0.0-rc4-00059-g143e859
#10
[ 24.328066] Call Trace:
[ 24.328070] [<ffffffff8103aa14>] warn_slowpath_common+0x7e/0x96
[ 24.328073] [<ffffffff8103aac0>] warn_slowpath_fmt+0x41/0x43
[ 24.328076] [<ffffffff81043da1>] ? ns_capable+0x35/0x4a
[ 24.328079] [<ffffffff8103b060>] do_syslog+0x89/0x438
[ 24.328082] [<ffffffff81103be8>] ? _d_rehash+0x44/0x46
[ 24.328084] [<ffffffff81103c10>] ? d_rehash+0x26/0x2b
[ 24.328087] [<ffffffff81143a53>] kmsg_open+0x17/0x19
[ 24.328091] [<ffffffff8113adfc>] proc_reg_open+0xab/0x148
[ 24.328093] [<ffffffff81143a3c>] ? kmsg_release+0x18/0x18
[ 24.328096] [<ffffffff81143a24>] ? seq_open_net+0x76/0x76
[ 24.328098] [<ffffffff8113ad51>] ? proc_alloc_inode+0x9c/0x9c
[ 24.328102] [<ffffffff810f11be>] __dentry_open+0x1fb/0x312
[ 24.328105] [<ffffffff810fc80f>] ? do_lookup+0x240/0x298
[ 24.328108] [<ffffffff810f2183>] nameidata_to_filp+0x5b/0x62
[ 24.328111] [<ffffffff810fe11e>] do_last+0x5c4/0x725
[ 24.328114] [<ffffffff810fedf3>] path_openat+0xc3/0x368
[ 24.328117] [<ffffffff8108b687>] ? call_rcu+0x10/0x12
[ 24.328119] [<ffffffff810fbec3>] ? putname+0x2d/0x36
[ 24.328122] [<ffffffff810ff0cb>] do_filp_open+0x33/0x81
[ 24.328125] [<ffffffff81108fe0>] ? alloc_fd+0x104/0x116
[ 24.328128] [<ffffffff810f2289>] do_sys_open+0xff/0x191
[ 24.328130] [<ffffffff810f2336>] sys_open+0x1b/0x1d
[ 24.328135] [<ffffffff814054fb>] system_call_fastpath+0x16/0x1b
[ 24.328137] ---[ end trace 8722208fe06884da ]---
[ 24.354551] auditd (2723): /proc/2723/oom_adj is deprecated, please use
/proc/2723/oom_score_adj instead.
[ 24.810919] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.810923] Bluetooth: BNEP filters: protocol multicast
[ 24.841394] Bluetooth: RFCOMM TTY layer initialized
[ 24.841398] Bluetooth: RFCOMM socket layer initialized
[ 24.841400] Bluetooth: RFCOMM ver 1.11
[ 25.655139] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 1, phase
0, 23 us
[ 34.820517] ata1.00: configured for UDMA/133
[ 34.820520] ata1: EH complete
[ 43.715532] eth1: Wrong control channel in association response: configured
center-freq: 2437 hti-cfreq: 2417 hti->control_chan: 2 band: 0. Disabling
HT.
[ 57.854023] eth1: Wrong control channel in association response: configured
center-freq: 2437 hti-cfreq: 2417 hti->control_chan: 2 band: 0. Disabling
HT.
[ 62.261494] eth1: Wrong control channel in association response: configured
center-freq: 2437 hti-cfreq: 2417 hti->control_chan: 2 band: 0. Disabling
HT.
[ 68.673323] PM: Syncing filesystems ... done.
[ 69.386251] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 69.400071] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[ 69.416268] Suspending console(s) (use no_console_suspend to debug)
[ 69.418375] usb 2-4: usb suspend
[ 69.419611] uhci_hcd 0000:00:1a.0: release dev 2 ep82-INT, period 2, phase
1, 17 us
[ 69.420002] uhci_hcd 0000:00:1a.1: release dev 2 ep81-INT, period 1, phase
0, 23 us
[ 69.420583] uhci_hcd 0000:00:1a.0: release dev 2 ep81-INT, period 8, phase
4, 17 us
[ 69.421991] usb 4-2: usb suspend
[ 69.422596] usb 3-1: usb suspend
[ 69.581217] hub 4-0:1.0: hub_suspend
[ 69.581224] hub 3-0:1.0: hub_suspend
[ 69.581231] usb usb4: bus suspend
[ 69.581236] usb usb3: bus suspend
[ 69.581242] usb usb4: suspend_rh
[ 69.581247] usb usb3: suspend_rh
[ 69.604142] hub 2-0:1.0: hub_suspend
[ 69.604151] usb usb2: bus suspend
[ 69.604157] ehci_hcd 0000:00:1d.7: suspend root hub
[ 69.604539] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 69.605363] sd 0:0:0:0: [sda] Stopping disk
[ 69.689209] ACPI handle has no context!
[ 69.689228] sdhci-pci 0000:15:00.2: PCI INT C disabled
[ 69.689240] ACPI handle has no context!
[ 69.689299] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 69.689314] uhci_hcd 0000:00:1d.2: uhci_pci_suspend
[ 69.689329] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 69.689337] uhci_hcd 0000:00:1d.1: uhci_pci_suspend
[ 69.689349] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 69.689357] uhci_hcd 0000:00:1d.0: uhci_pci_suspend
[ 69.689373] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 69.689486] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[ 69.689495] uhci_hcd 0000:00:1a.2: uhci_pci_suspend
[ 69.689505] HDA Intel 0000:00:1b.0: PCI INT B disabled
[ 69.689511] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 69.689518] uhci_hcd 0000:00:1a.1: uhci_pci_suspend
[ 69.689535] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 69.689543] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 69.689560] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 69.696106] ACPI handle has no context!
[ 69.704118] i915 0000:00:02.0: power state changed by ACPI to D3
[ 69.784584] e1000e 0000:00:19.0: PCI INT A disabled
[ 69.784598] e1000e 0000:00:19.0: PME# enabled
[ 69.784615] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 69.800088] PM: suspend of devices complete after 382.031 msecs
[ 69.816219] ehci_hcd 0000:00:1d.7: wakeup: 0
[ 69.832047] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[ 69.832056] ehci_hcd 0000:00:1d.7: --> PCI D3hot
[ 69.832104] uhci_hcd 0000:00:1d.2: wakeup: 0
[ 69.832111] uhci_hcd 0000:00:1d.2: --> PCI D0
[ 69.832158] uhci_hcd 0000:00:1d.1: wakeup: 0
[ 69.832164] uhci_hcd 0000:00:1d.1: --> PCI D0
[ 69.832211] uhci_hcd 0000:00:1d.0: wakeup: 0
[ 69.832228] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 69.832234] uhci_hcd 0000:00:1d.0: --> PCI D3hot
[ 69.832292] ehci_hcd 0000:00:1a.7: wakeup: 0
[ 69.848044] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[ 69.848053] ehci_hcd 0000:00:1a.7: --> PCI D3hot
[ 69.848101] uhci_hcd 0000:00:1a.2: wakeup: 0
[ 69.848118] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3
[ 69.848123] uhci_hcd 0000:00:1a.2: --> PCI D3hot
[ 69.848170] uhci_hcd 0000:00:1a.1: wakeup: 0
[ 69.848177] uhci_hcd 0000:00:1a.1: --> PCI D0
[ 69.848223] uhci_hcd 0000:00:1a.0: wakeup: 0
[ 69.868043] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 69.868049] uhci_hcd 0000:00:1a.0: --> PCI D3hot
[ 69.868176] PM: late suspend of devices complete after 68.079 msecs
[ 69.870233] ACPI: Preparing to enter system sleep state S3
[ 70.028103] PM: Saving platform NVS memory
[ 70.038400] Disabling non-boot CPUs ...
[ 70.038812] Broke affinity for irq 9
[ 70.038823] Broke affinity for irq 12
[ 70.038841] Broke affinity for irq 17
[ 70.140044] CPU 1 is now offline
[ 70.140769] Extended CMOS year: 2000
[ 70.140769] ACPI: Low-level resume complete
[ 70.140769] PM: Restoring platform NVS memory
[ 70.140769] Extended CMOS year: 2000
[ 70.140769] Enabling non-boot CPUs ...
[ 70.148930] Booting Node 0 Processor 1 APIC 0x1
[ 70.148932] smpboot cpu 1: start_ip = 99000
[ 70.039934] Disabled fast string operations
[ 70.240124] Switched to NOHz mode on CPU #1
[ 70.272756] CPU1 is up
[ 70.274584] ACPI: Waking up from system sleep state S3
[ 70.832235] i915 0000:00:02.0: restoring config space at offset 0x1 (was
0x900007, writing 0x900407)
[ 70.832294] pci 0000:00:02.1: restoring config space at offset 0x1 (was
0x900000, writing 0x900007)
[ 70.832321] pci 0000:00:03.0: restoring config space at offset 0xf (was
0x100, writing 0x10b)
[ 70.832347] pci 0000:00:03.0: restoring config space at offset 0x1 (was
0x100006, writing 0x180006)
[ 70.860046] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 70.860056] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 70.860104] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 70.860127] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 70.860134] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 70.860184] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 70.860209] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 70.860217] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 70.860263] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 70.860284] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 70.860291] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 70.860350] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1
(was 0x2900106, writing 0x2900102)
[ 70.860382] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 70.860391] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 70.860454] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1
(was 0x100106, writing 0x100102)
[ 70.860518] pcieport 0000:00:1c.0: restoring config space at offset 0x9
(was 0x1fff1, writing 0xc051c041)
[ 70.860530] pcieport 0000:00:1c.0: restoring config space at offset 0x8
(was 0xfff0, writing 0xc030c020)
[ 70.860541] pcieport 0000:00:1c.0: restoring config space at offset 0x7
(was 0xf0, writing 0x9090)
[ 70.860564] pcieport 0000:00:1c.0: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 70.860655] pcieport 0000:00:1c.1: restoring config space at offset 0x9
(was 0x1fff1, writing 0xc011c001)
[ 70.860669] pcieport 0000:00:1c.1: restoring config space at offset 0x7
(was 0x200000f0, writing 0x8080)
[ 70.860691] pcieport 0000:00:1c.1: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 70.860798] pcieport 0000:00:1c.3: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 70.860905] pcieport 0000:00:1c.4: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 70.860964] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 70.860972] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 70.861018] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 70.861039] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 70.861046] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 70.861095] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 70.861158] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 70.861231] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1
(was 0x2900106, writing 0x2900102)
[ 70.861263] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 70.861273] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 70.861454] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was
0x2b00007, writing 0x2b00407)
[ 70.876055] firewire_ohci 0000:15:00.1: BAR 0: set to [mem
0xf4801000-0xf48017ff] (PCI address [0xf4801000-0xf48017ff])
[ 70.876108] firewire_ohci 0000:15:00.1: restoring config space at offset
0x3 (was 0x800000, writing 0x802010)
[ 70.876123] firewire_ohci 0000:15:00.1: restoring config space at offset
0x1 (was 0x2100000, writing 0x2100106)
[ 70.892048] sdhci-pci 0000:15:00.2: BAR 0: set to [mem
0xf4801800-0xf48018ff] (PCI address [0xf4801800-0xf48018ff])
[ 70.892101] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3
(was 0x800000, writing 0x802010)
[ 70.892116] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1
(was 0x2100000, writing 0x2100106)
[ 70.893113] PM: early resume of devices complete after 61.027 msecs
[ 70.893478] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[ 70.893492] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 70.893501] uhci_hcd 0000:00:1a.1: uhci_pci_resume
[ 70.893510] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2f00
[ 70.893516] uhci_hcd 0000:00:1a.1: Performing full reset
[ 70.893548] usb usb4: root hub lost power or was reset
[ 70.893611] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 70.893629] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 70.893641] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 70.893651] e1000e 0000:00:19.0: PME# disabled
[ 70.893661] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 70.893709] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 70.893757] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 70.893765] uhci_hcd 0000:00:1d.1: uhci_pci_resume
[ 70.893812] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2f00
[ 70.893818] uhci_hcd 0000:00:1d.1: Performing full reset
[ 70.893849] usb usb7: root hub lost power or was reset
[ 70.893893] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 70.893906] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 70.893974] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 70.894039] i915 0000:00:02.0: power state changed by ACPI to D0
[ 70.894072] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 70.894416] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 70.895407] usb usb4: usb resume
[ 70.895413] usb usb4: wakeup_rh
[ 70.895910] usb usb7: usb resume
[ 70.895915] usb usb7: wakeup_rh
[ 70.896585] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 70.896597] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 70.896610] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 70.896617] uhci_hcd 0000:00:1a.0: uhci_pci_resume
[ 70.896626] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2000
[ 70.896631] uhci_hcd 0000:00:1a.0: Performing full reset
[ 70.896666] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 70.896674] usb usb3: root hub lost power or was reset
[ 70.896682] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 70.896692] uhci_hcd 0000:00:1d.2: uhci_pci_resume
[ 70.896700] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
[ 70.896705] uhci_hcd 0000:00:1d.2: Performing full reset
[ 70.896736] usb usb8: root hub lost power or was reset
[ 70.896769] usb usb3: usb resume
[ 70.896773] usb usb3: wakeup_rh
[ 70.896786] usb usb8: usb resume
[ 70.896790] usb usb8: wakeup_rh
[ 70.896831] pci 0000:00:1e.0: setting latency timer to 64
[ 70.896858] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 70.896870] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ
22
[ 70.896882] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 70.896889] uhci_hcd 0000:00:1a.2: uhci_pci_resume
[ 70.896898] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x2000
[ 70.896903] uhci_hcd 0000:00:1a.2: Performing full reset
[ 70.896934] usb usb5: root hub lost power or was reset
[ 70.896972] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 70.896979] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW
doesn't fully claim to support it.
[ 70.898017] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 70.898030] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ
23
[ 70.898043] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 70.898129] usb usb5: usb resume
[ 70.898134] usb usb5: wakeup_rh
[ 70.898161] usb usb1: usb resume
[ 70.898168] ehci_hcd 0000:00:1a.7: resume root hub
[ 70.898208] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 70.898232] i915 0000:00:02.0: power state changed by ACPI to D0
[ 70.898244] i915 0000:00:02.0: setting latency timer to 64
[ 70.904067] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 70.904081] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 70.904097] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 70.904105] uhci_hcd 0000:00:1d.0: uhci_pci_resume
[ 70.904114] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
[ 70.904122] ahci 0000:00:1f.2: setting latency timer to 64
[ 70.904129] uhci_hcd 0000:00:1d.0: Performing full reset
[ 70.904167] usb usb6: root hub lost power or was reset
[ 70.904260] usb usb6: usb resume
[ 70.904265] usb usb6: wakeup_rh
[ 70.904302] sd 0:0:0:0: [sda] Starting disk
[ 70.904334] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 70.904341] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ
19
[ 70.904347] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 70.904435] usb usb2: usb resume
[ 70.904438] ehci_hcd 0000:00:1d.7: resume root hub
[ 70.908097] hub 7-0:1.0: hub_reset_resume
[ 70.908099] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 70.908107] hub 4-0:1.0: hub_reset_resume
[ 70.908109] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 70.912058] hub 5-0:1.0: hub_reset_resume
[ 70.912060] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 70.912065] hub 8-0:1.0: hub_reset_resume
[ 70.912067] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 70.912071] hub 3-0:1.0: hub_reset_resume
[ 70.912073] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 70.918227] legacy_resume(): pnp_bus_resume+0x0/0x67 returns -19
[ 70.918230] PM: Device 00:0a failed to resume: error -19
[ 70.920016] hub 6-0:1.0: hub_reset_resume
[ 70.920018] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 70.932053] hub 2-0:1.0: hub_resume
[ 70.932066] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001002 0 ACK
POWER sig=se0 CSC
[ 70.932069] hub 2-0:1.0: port 4: status 0100 change 0001
[ 70.960157] firewire_core: skipped bus generations, destroying all nodes
[ 70.990691] Extended CMOS year: 2000
[ 71.012148] uhci_hcd 0000:00:1a.1: port 2 portsc 008a,00
[ 71.012157] hub 4-0:1.0: port 2: status 0100 change 0003
[ 71.016157] uhci_hcd 0000:00:1a.0: port 1 portsc 008a,00
[ 71.016167] hub 3-0:1.0: port 1: status 0100 change 0003
[ 71.028331] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion
[ 71.028343] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003801 0 ACK
POWER OWNER sig=j CONNECT
[ 71.028582] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001802 0 ACK
POWER sig=j CSC
[ 71.028590] ehci_hcd 0000:00:1a.7: failed handover port 1: 1800
[ 71.036123] hub 2-0:1.0: port 4 status 0000.0100 after resume, -19
[ 71.036129] usb 2-4: can't resume, status -19
[ 71.036133] hub 2-0:1.0: logical disconnect on port 4
[ 71.044112] hub 1-0:1.0: hub_resume
[ 71.044126] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 71.044135] hub 1-0:1.0: port 1: status 0501 change 0001
[ 71.044161] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK
POWER OWNER sig=se0 CSC
[ 71.044184] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 71.044192] hub 1-0:1.0: port 6: status 0501 change 0001
[ 71.148149] usb 1-6: finish reset-resume
[ 71.148180] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00
[ 71.148192] hub 3-0:1.0: port 1 status 0000.0100 after resume, -19
[ 71.148198] usb 4-2: finish reset-resume
[ 71.148204] usb 3-1: can't resume, status -19
[ 71.148209] hub 3-0:1.0: logical disconnect on port 1
[ 71.204332] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 71.204343] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 71.224127] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 71.224170] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 71.227031] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 71.228123] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 71.228132] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 71.232758] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 71.233937] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 71.233945] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 71.234949] ata2.00: configured for UDMA/100
[ 71.260087] usb 1-6: reset high speed USB device number 4 using ehci_hcd
[ 71.295798] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 71.295807] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 71.295816] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 71.316331] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 71.316342] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 71.405659] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 71.405668] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 71.405677] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 71.455450] ata1.00: configured for UDMA/133
[ 71.460318] firewire_core: rediscovered device fw0
[ 71.495341] thinkpad_acpi: restoring fan level to 0x07
[ 71.504089] usb 4-2: reset full speed USB device number 2 using uhci_hcd
[ 71.650464] btusb 4-2:1.0: no reset_resume for driver btusb?
[ 71.650466] btusb 4-2:1.1: no reset_resume for driver btusb?
[ 71.650468] btusb 4-2:1.0: forced unbind
[ 71.900416] PM: resume of devices complete after 1007.170 msecs
[ 71.900461] btusb 4-2:1.0: usb_probe_interface
[ 71.900467] btusb 4-2:1.0: usb_probe_interface - got id
[ 71.900816] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 1, phase
0, 23 us
[ 71.901497] Restarting tasks ...
[ 71.901598] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 71.901615] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 71.901625] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 71.901635] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 71.901644] hub 2-0:1.0: state 7 ports 6 chg 0010 evt 0000
[ 71.901660] hub 2-0:1.0: port 4, status 0100, change 0000, 12 Mb/s
[ 71.901667] usb 2-4: USB disconnect, device number 2
[ 71.901672] usb 2-4: unregistering device
[ 71.901677] usb 2-4: unregistering interface 2-4:1.0
[ 71.901762] usb 2-4: unregistering interface 2-4:1.1
[ 71.909030] usb 2-4: unregistering interface 2-4:1.2
[ 71.909131] usb 2-4: unregistering interface 2-4:1.3
[ 71.909532] usb 2-4: unregistering interface 2-4:1.4
[ 71.909628] usb 2-4: unregistering interface 2-4:1.5
[ 71.909679] drivers/usb/core/file.c: removing 0 minor
[ 71.909813] usb 2-4: unregistering interface 2-4:1.6
[ 71.909863] drivers/usb/core/file.c: removing 1 minor
[ 71.909993] usb 2-4: unregistering interface 2-4:1.7
[ 71.910049] cdc_ether 2-4:1.7: wwan0: unregister 'cdc_ether'
usb-0000:00:1d.7-4, Mobile Broadband Network Device
[ 71.924196] usb 2-4: unregistering interface 2-4:1.8
[ 71.924308] usb 2-4: unregistering interface 2-4:1.9
[ 71.924655] usb 2-4: unregistering interface 2-4:1.10
[ 71.924688] done.
[ 71.924692] usb 2-4: usb_disable_device nuking all URBs
[ 71.924694] video LNXVIDEO:00: Restoring backlight state
[ 71.924798] hub 4-0:1.0: state 7 ports 2 chg 0004 evt 0004
[ 71.924809] hub 4-0:1.0: port 2, status 0103, change 0000, 12 Mb/s
[ 71.924813] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 71.924821] hub 3-0:1.0: port 1, status 0100, change 0000, 12 Mb/s
[ 71.924824] usb 3-1: USB disconnect, device number 2
[ 71.924825] usb 3-1: unregistering device
[ 71.924827] usb 3-1: unregistering interface 3-1:1.0
[ 71.952447] usb 3-1: unregistering interface 3-1:1.1
[ 71.990406] drivers/usb/core/file.c: removing 2 minor
[ 71.990543] usb 3-1: unregistering interface 3-1:1.2
[ 71.990575] drivers/usb/core/file.c: removing 3 minor
[ 71.990683] usb 3-1: usb_disable_device nuking all URBs
[ 72.004181] hub 1-0:1.0: state 7 ports 6 chg 0042 evt 0000
[ 72.004193] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 72.060203] ehci_hcd 0000:00:1a.7: port 1 full speed --> companion
[ 72.060209] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003801 0 ACK
POWER OWNER sig=j CONNECT
[ 72.060214] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
[ 72.072024] usb usb8: suspend_rh (auto-stop)
[ 72.072040] usb usb6: suspend_rh (auto-stop)
[ 72.072053] usb usb5: suspend_rh (auto-stop)
[ 72.072068] usb usb7: suspend_rh (auto-stop)
[ 72.116030] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0 ACK
POWER OWNER sig=se0 CSC
[ 72.116060] hub 1-0:1.0: port 6, status 0503, change 0000, 480 Mb/s
[ 72.116064] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0002
[ 72.116072] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 72.116081] uhci_hcd 0000:00:1a.0: port 1 portsc 0093,00
[ 72.116087] hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 72.248058] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status
0x101
[ 72.360042] usb 3-1: new full speed USB device number 3 using uhci_hcd
[ 72.496585] usb 3-1: ep0 maxpacket = 8
[ 72.529819] usb 3-1: skipped 1 descriptor after interface
[ 72.529830] usb 3-1: skipped 1 descriptor after interface
[ 72.529838] usb 3-1: skipped 1 descriptor after interface
[ 72.534933] usb 3-1: default language 0x0409
[ 72.549809] usb 3-1: udev 3, busnum 3, minor = 258
[ 72.549816] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
[ 72.549823] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 72.549830] usb 3-1: Product: USB Receiver
[ 72.549835] usb 3-1: Manufacturer: Logitech
[ 72.550143] usb 3-1: usb_probe_device
[ 72.550152] usb 3-1: configuration #1 chosen from 1 choice
[ 72.555814] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[ 72.555907] usbhid 3-1:1.0: usb_probe_interface
[ 72.555913] usbhid 3-1:1.0: usb_probe_interface - got id
[ 72.558402] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input16
[ 72.558426] uhci_hcd 0000:00:1a.0: reserve dev 3 ep81-INT, period 8, phase
4, 17 us
[ 72.558671] generic-usb 0003:046D:C52B.0004: input,hidraw0: USB HID v1.11
Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
[ 72.558714] usb 3-1: adding 3-1:1.1 (config #1, interface 1)
[ 72.558808] usbhid 3-1:1.1: usb_probe_interface
[ 72.558815] usbhid 3-1:1.1: usb_probe_interface - got id
[ 72.562896] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input17
[ 72.562914] uhci_hcd 0000:00:1a.0: reserve dev 3 ep82-INT, period 2, phase
1, 17 us
[ 72.563171] usbhid 3-1:1.1: looking for a minor, starting at 0
[ 72.563424] generic-usb 0003:046D:C52B.0005: input,hiddev0,hidraw1: USB HID
v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
[ 72.563470] usb 3-1: adding 3-1:1.2 (config #1, interface 2)
[ 72.563545] usbhid 3-1:1.2: usb_probe_interface
[ 72.563552] usbhid 3-1:1.2: usb_probe_interface - got id
[ 72.568833] usbhid 3-1:1.2: looking for a minor, starting at 0
[ 72.569063] generic-usb 0003:046D:C52B.0006: hiddev0,hidraw2: USB HID v1.11
Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input2
[ 72.569176] drivers/usb/core/inode.c: creating file '003'
[ 73.900130] hub 7-0:1.0: hub_suspend
[ 73.900148] usb usb7: bus auto-suspend
[ 73.900154] usb usb7: suspend_rh
[ 73.900181] hub 8-0:1.0: hub_suspend
[ 73.900189] usb usb8: bus auto-suspend
[ 73.900194] usb usb8: suspend_rh
[ 73.900218] hub 5-0:1.0: hub_suspend
[ 73.900226] usb usb5: bus auto-suspend
[ 73.900231] usb usb5: suspend_rh
[ 73.900254] hub 6-0:1.0: hub_suspend
[ 73.900262] usb usb6: bus auto-suspend
[ 73.900267] usb usb6: suspend_rh
[ 73.924113] hub 2-0:1.0: hub_suspend
[ 73.924125] usb usb2: bus auto-suspend
[ 73.924132] ehci_hcd 0000:00:1d.7: suspend root hub
[ 75.534232] usb usb2: usb wakeup-resume
[ 75.534246] usb usb2: usb auto-resume
[ 75.534254] ehci_hcd 0000:00:1d.7: resume root hub
[ 75.560046] hub 2-0:1.0: hub_resume
[ 75.560085] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 75.560095] hub 2-0:1.0: port 4: status 0501 change 0001
[ 75.664174] hub 2-0:1.0: state 7 ports 6 chg 0010 evt 0000
[ 75.664201] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 75.720292] ehci_hcd 0000:00:1d.7: port 4 high speed
[ 75.720306] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 75.776064] usb 2-4: new high speed USB device number 3 using ehci_hcd
[ 75.912417] ehci_hcd 0000:00:1d.7: port 4 high speed
[ 75.912431] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 76.639475] usb 2-4: skipped 3 descriptors after interface
[ 76.639485] usb 2-4: skipped 4 descriptors after interface
[ 76.639494] usb 2-4: skipped 4 descriptors after interface
[ 76.639502] usb 2-4: skipped 2 descriptors after interface
[ 76.639509] usb 2-4: skipped 2 descriptors after interface
[ 76.639517] usb 2-4: skipped 5 descriptors after interface
[ 76.639526] usb 2-4: skipped 4 descriptors after interface
[ 76.714613] usb 2-4: skipped 3 descriptors after interface
[ 76.714621] usb 2-4: skipped 4 descriptors after interface
[ 76.714629] usb 2-4: skipped 4 descriptors after interface
[ 76.714637] usb 2-4: skipped 2 descriptors after interface
[ 76.714645] usb 2-4: skipped 2 descriptors after interface
[ 76.714652] usb 2-4: skipped 5 descriptors after interface
[ 76.714957] usb 2-4: default language 0x0409
[ 76.746089] usb 2-4: udev 3, busnum 2, minor = 130
[ 76.746096] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
[ 76.746104] usb 2-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 76.746110] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard
Composite Device
[ 76.746116] usb 2-4: Manufacturer: Ericsson
[ 76.746121] usb 2-4: SerialNumber: 3541430228088360
[ 76.746436] usb 2-4: usb_probe_device
[ 76.746445] usb 2-4: configuration #1 chosen from 2 choices
[ 76.749440] usb 2-4: adding 2-4:1.0 (config #1, interface 0)
[ 76.749874] usb 2-4: adding 2-4:1.1 (config #1, interface 1)
[ 76.771139] cdc_acm 2-4:1.1: usb_probe_interface
[ 76.771148] cdc_acm 2-4:1.1: usb_probe_interface - got id
[ 76.771338] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
[ 76.772091] usb 2-4: adding 2-4:1.2 (config #1, interface 2)
[ 76.785693] usb 2-4: adding 2-4:1.3 (config #1, interface 3)
[ 76.795497] cdc_acm 2-4:1.3: usb_probe_interface
[ 76.795507] cdc_acm 2-4:1.3: usb_probe_interface - got id
[ 76.795698] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
[ 76.796425] usb 2-4: adding 2-4:1.4 (config #1, interface 4)
[ 76.800801] usb 2-4: adding 2-4:1.5 (config #1, interface 5)
[ 76.808885] cdc_wdm 2-4:1.5: usb_probe_interface
[ 76.808892] cdc_wdm 2-4:1.5: usb_probe_interface - got id
[ 76.808906] cdc_wdm 2-4:1.5: looking for a minor, starting at 0
[ 76.809027] cdc_wdm 2-4:1.5: cdc-wdm-174: USB WDM device
[ 76.809069] usb 2-4: adding 2-4:1.6 (config #1, interface 6)
[ 76.812300] cdc_wdm 2-4:1.6: usb_probe_interface
[ 76.812308] cdc_wdm 2-4:1.6: usb_probe_interface - got id
[ 76.812320] cdc_wdm 2-4:1.6: looking for a minor, starting at 0
[ 76.812493] cdc_wdm 2-4:1.6: cdc-wdm-173: USB WDM device
[ 76.812537] usb 2-4: adding 2-4:1.7 (config #1, interface 7)
[ 76.819249] cdc_ether 2-4:1.7: usb_probe_interface
[ 76.819257] cdc_ether 2-4:1.7: usb_probe_interface - got id
[ 76.822114] cdc_ether 2-4:1.7: wwan0: register 'cdc_ether' at
usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 76.822162] usb 2-4: adding 2-4:1.8 (config #1, interface 8)
[ 76.826670] usb 2-4: adding 2-4:1.9 (config #1, interface 9)
[ 76.829994] cdc_acm 2-4:1.9: usb_probe_interface
[ 76.830006] cdc_acm 2-4:1.9: usb_probe_interface - got id
[ 76.830203] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
[ 76.830953] usb 2-4: adding 2-4:1.10 (config #1, interface 10)
[ 76.836988] drivers/usb/core/inode.c: creating file '003'
[ 81.278481] eth1: Wrong control channel in association response: configured
center-freq: 2437 hti-cfreq: 2417 hti->control_chan: 2 band: 0. Disabling
HT.
[ 81.376626] eth1: Wrong control channel in association response: configured
center-freq: 2437 hti-cfreq: 2417 hti->control_chan: 2 band: 0. Disabling
HT.
[ 81.481127] eth1: Wrong control channel in association response: configured
center-freq: 2437 hti-cfreq: 2417 hti->control_chan: 2 band: 0. Disabling
HT.
[ 93.566476] eth1: Wrong control channel in association response: configured
center-freq: 2437 hti-cfreq: 2417 hti->control_chan: 2 band: 0. Disabling
HT.
[ 93.664806] eth1: Wrong control channel in association response: configured
center-freq: 2437 hti-cfreq: 2417 hti->control_chan: 2 band: 0. Disabling
HT.
[ 107.953912] PM: Syncing filesystems ... done.
[ 109.833518] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 109.848160] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[ 109.864266] Suspending console(s) (use no_console_suspend to debug)
[ 109.865888] usb 1-6: usb auto-suspend
[ 109.880434] usb 2-4: usb suspend
[ 109.881831] uhci_hcd 0000:00:1a.0: release dev 3 ep82-INT, period 2, phase
1, 17 us
[ 109.882475] uhci_hcd 0000:00:1a.1: release dev 2 ep81-INT, period 1, phase
0, 23 us
[ 109.882823] uhci_hcd 0000:00:1a.0: release dev 3 ep81-INT, period 8, phase
4, 17 us
[ 109.884471] usb 4-2: usb suspend
[ 109.884818] usb 3-1: usb suspend
[ 110.036474] hub 4-0:1.0: hub_suspend
[ 110.036485] usb usb4: bus suspend
[ 110.036491] usb usb4: suspend_rh
[ 110.036497] hub 3-0:1.0: hub_suspend
[ 110.036508] usb usb3: bus suspend
[ 110.036513] usb usb3: suspend_rh
[ 110.045988] hub 2-0:1.0: hub_suspend
[ 110.045997] usb usb2: bus suspend
[ 110.046003] ehci_hcd 0000:00:1d.7: suspend root hub
[ 110.046051] hub 1-0:1.0: hub_suspend
[ 110.046059] usb usb1: bus suspend
[ 110.046063] ehci_hcd 0000:00:1a.7: suspend root hub
[ 110.046519] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 110.057552] sd 0:0:0:0: [sda] Stopping disk
[ 110.129247] ACPI handle has no context!
[ 110.129265] sdhci-pci 0000:15:00.2: PCI INT C disabled
[ 110.129277] ACPI handle has no context!
[ 110.129314] uhci_hcd 0000:00:1d.2: uhci_pci_suspend
[ 110.129323] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 110.129331] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 110.129336] uhci_hcd 0000:00:1d.1: uhci_pci_suspend
[ 110.129345] uhci_hcd 0000:00:1d.0: uhci_pci_suspend
[ 110.129350] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 110.129358] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 110.129426] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[ 110.129433] HDA Intel 0000:00:1b.0: PCI INT B disabled
[ 110.129439] uhci_hcd 0000:00:1a.2: uhci_pci_suspend
[ 110.129457] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 110.129465] uhci_hcd 0000:00:1a.1: uhci_pci_suspend
[ 110.129483] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 110.129490] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 110.129507] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 110.136104] ACPI handle has no context!
[ 110.144081] i915 0000:00:02.0: power state changed by ACPI to D3
[ 110.224572] e1000e 0000:00:19.0: PME# enabled
[ 110.224589] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 110.240070] PM: suspend of devices complete after 359.775 msecs
[ 110.256213] ehci_hcd 0000:00:1d.7: wakeup: 0
[ 110.272036] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[ 110.272045] ehci_hcd 0000:00:1d.7: --> PCI D3hot
[ 110.272094] uhci_hcd 0000:00:1d.2: wakeup: 0
[ 110.272100] uhci_hcd 0000:00:1d.2: --> PCI D0
[ 110.272147] uhci_hcd 0000:00:1d.1: wakeup: 0
[ 110.272154] uhci_hcd 0000:00:1d.1: --> PCI D0
[ 110.272200] uhci_hcd 0000:00:1d.0: wakeup: 0
[ 110.272218] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 110.272223] uhci_hcd 0000:00:1d.0: --> PCI D3hot
[ 110.272539] ehci_hcd 0000:00:1a.7: wakeup: 0
[ 110.288046] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[ 110.288055] ehci_hcd 0000:00:1a.7: --> PCI D3hot
[ 110.288102] uhci_hcd 0000:00:1a.2: wakeup: 0
[ 110.288119] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3
[ 110.288125] uhci_hcd 0000:00:1a.2: --> PCI D3hot
[ 110.288171] uhci_hcd 0000:00:1a.1: wakeup: 0
[ 110.288178] uhci_hcd 0000:00:1a.1: --> PCI D0
[ 110.288225] uhci_hcd 0000:00:1a.0: wakeup: 0
[ 110.308044] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 110.308051] uhci_hcd 0000:00:1a.0: --> PCI D3hot
[ 110.308177] PM: late suspend of devices complete after 68.098 msecs
[ 110.310228] ACPI: Preparing to enter system sleep state S3
[ 110.468104] PM: Saving platform NVS memory
[ 110.478410] Disabling non-boot CPUs ...
[ 110.478860] Broke affinity for irq 19
[ 110.580044] CPU 1 is now offline
[ 110.580699] Extended CMOS year: 2000
[ 110.580699] ACPI: Low-level resume complete
[ 110.580699] PM: Restoring platform NVS memory
[ 110.580699] Extended CMOS year: 2000
[ 110.580699] Enabling non-boot CPUs ...
[ 110.588870] Booting Node 0 Processor 1 APIC 0x1
[ 110.588872] smpboot cpu 1: start_ip = 99000
[ 110.479934] Disabled fast string operations
[ 110.680117] Switched to NOHz mode on CPU #1
[ 110.697048] CPU1 is up
[ 110.702476] ACPI: Waking up from system sleep state S3
[ 111.248232] i915 0000:00:02.0: restoring config space at offset 0x1 (was
0x900007, writing 0x900407)
[ 111.248291] pci 0000:00:02.1: restoring config space at offset 0x1 (was
0x900000, writing 0x900007)
[ 111.248317] pci 0000:00:03.0: restoring config space at offset 0xf (was
0x100, writing 0x10b)
[ 111.248344] pci 0000:00:03.0: restoring config space at offset 0x1 (was
0x100006, writing 0x180006)
[ 111.268042] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 111.268052] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 111.268100] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 111.268123] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 111.268130] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 111.268180] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 111.268205] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 111.268212] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 111.268259] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 111.268280] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 111.268287] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 111.268346] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1
(was 0x2900106, writing 0x2900102)
[ 111.268378] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 111.268388] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 111.268450] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1
(was 0x100106, writing 0x100102)
[ 111.268514] pcieport 0000:00:1c.0: restoring config space at offset 0x9
(was 0x1fff1, writing 0xc051c041)
[ 111.268526] pcieport 0000:00:1c.0: restoring config space at offset 0x8
(was 0xfff0, writing 0xc030c020)
[ 111.268537] pcieport 0000:00:1c.0: restoring config space at offset 0x7
(was 0xf0, writing 0x9090)
[ 111.268559] pcieport 0000:00:1c.0: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 111.268651] pcieport 0000:00:1c.1: restoring config space at offset 0x9
(was 0x1fff1, writing 0xc011c001)
[ 111.268664] pcieport 0000:00:1c.1: restoring config space at offset 0x7
(was 0x200000f0, writing 0x20008080)
[ 111.268686] pcieport 0000:00:1c.1: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 111.268793] pcieport 0000:00:1c.3: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 111.268900] pcieport 0000:00:1c.4: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 111.268960] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 111.268967] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 111.269013] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 111.269035] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 111.269042] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 111.269090] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 111.269154] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 111.269227] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1
(was 0x2900106, writing 0x2900102)
[ 111.269259] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 111.269269] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 111.269451] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was
0x2b00007, writing 0x2b00407)
[ 111.269636] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was
0x100106, writing 0x100506)
[ 111.284053] firewire_ohci 0000:15:00.1: BAR 0: set to [mem
0xf4801000-0xf48017ff] (PCI address [0xf4801000-0xf48017ff])
[ 111.284106] firewire_ohci 0000:15:00.1: restoring config space at offset
0x3 (was 0x800000, writing 0x802010)
[ 111.284121] firewire_ohci 0000:15:00.1: restoring config space at offset
0x1 (was 0x2100000, writing 0x2100106)
[ 111.300049] sdhci-pci 0000:15:00.2: BAR 0: set to [mem
0xf4801800-0xf48018ff] (PCI address [0xf4801800-0xf48018ff])
[ 111.300102] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3
(was 0x800000, writing 0x802010)
[ 111.300117] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1
(was 0x2100000, writing 0x2100106)
[ 111.301113] PM: early resume of devices complete after 53.029 msecs
[ 111.301307] i915 0000:00:02.0: power state changed by ACPI to D0
[ 111.301319] i915 0000:00:02.0: power state changed by ACPI to D0
[ 111.301331] i915 0000:00:02.0: setting latency timer to 64
[ 111.301687] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 111.301699] e1000e 0000:00:19.0: PME# disabled
[ 111.301817] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 111.303982] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 111.303990] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 111.304026] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 111.304039] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 111.304048] uhci_hcd 0000:00:1a.0: uhci_pci_resume
[ 111.304057] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2f00
[ 111.304062] uhci_hcd 0000:00:1a.0: Performing full reset
[ 111.304094] usb usb3: root hub lost power or was reset
[ 111.304121] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[ 111.304133] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 111.304141] uhci_hcd 0000:00:1a.1: uhci_pci_resume
[ 111.304148] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000
[ 111.304153] uhci_hcd 0000:00:1a.1: Performing full reset
[ 111.304183] usb usb4: root hub lost power or was reset
[ 111.304202] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 111.304209] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 111.304219] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ
22
[ 111.304231] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 111.304238] uhci_hcd 0000:00:1a.2: uhci_pci_resume
[ 111.304246] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x2000
[ 111.304251] uhci_hcd 0000:00:1a.2: Performing full reset
[ 111.304281] usb usb5: root hub lost power or was reset
[ 111.304302] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 111.304312] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 111.304324] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ
23
[ 111.304337] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 111.304433] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 111.304446] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 111.304509] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 111.304612] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 111.304620] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 111.304630] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 111.304642] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 111.304649] uhci_hcd 0000:00:1d.0: uhci_pci_resume
[ 111.304657] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00
[ 111.304663] uhci_hcd 0000:00:1d.0: Performing full reset
[ 111.304694] usb usb6: root hub lost power or was reset
[ 111.304716] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 111.304727] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 111.304735] uhci_hcd 0000:00:1d.1: uhci_pci_resume
[ 111.304742] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
[ 111.304747] uhci_hcd 0000:00:1d.1: Performing full reset
[ 111.304777] usb usb7: root hub lost power or was reset
[ 111.304798] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 111.304810] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 111.304817] uhci_hcd 0000:00:1d.2: uhci_pci_resume
[ 111.304825] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
[ 111.304830] uhci_hcd 0000:00:1d.2: Performing full reset
[ 111.304860] usb usb8: root hub lost power or was reset
[ 111.304880] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 111.304890] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 111.304903] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ
19
[ 111.304915] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 111.304999] pci 0000:00:1e.0: setting latency timer to 64
[ 111.305026] ahci 0000:00:1f.2: setting latency timer to 64
[ 111.305137] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 111.305145] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW
doesn't fully claim to support it.
[ 111.305183] sd 0:0:0:0: [sda] Starting disk
[ 111.305238] usb usb1: usb resume
[ 111.305244] ehci_hcd 0000:00:1a.7: resume root hub
[ 111.305277] usb usb2: usb resume
[ 111.305283] ehci_hcd 0000:00:1d.7: resume root hub
[ 111.305315] usb usb3: usb resume
[ 111.305320] usb usb3: wakeup_rh
[ 111.305375] usb usb4: usb resume
[ 111.305380] usb usb4: wakeup_rh
[ 111.305433] usb usb5: usb resume
[ 111.305437] usb usb5: wakeup_rh
[ 111.305471] usb usb6: usb resume
[ 111.305475] usb usb6: wakeup_rh
[ 111.305510] usb usb7: usb resume
[ 111.305515] usb usb7: wakeup_rh
[ 111.305549] usb usb8: usb resume
[ 111.305553] usb usb8: wakeup_rh
[ 111.320154] hub 3-0:1.0: hub_reset_resume
[ 111.320156] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 111.320164] hub 4-0:1.0: hub_reset_resume
[ 111.320166] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 111.320170] hub 5-0:1.0: hub_reset_resume
[ 111.320171] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 111.320175] hub 6-0:1.0: hub_reset_resume
[ 111.320177] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 111.320181] hub 7-0:1.0: hub_reset_resume
[ 111.320183] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 111.320187] hub 8-0:1.0: hub_reset_resume
[ 111.320188] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 111.320234] legacy_resume(): pnp_bus_resume+0x0/0x67 returns -19
[ 111.320236] PM: Device 00:0a failed to resume: error -19
[ 111.332017] hub 2-0:1.0: hub_resume
[ 111.332032] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001002 0 ACK
POWER sig=se0 CSC
[ 111.332035] hub 2-0:1.0: port 4: status 0100 change 0001
[ 111.368123] firewire_core: skipped bus generations, destroying all nodes
[ 111.402630] Extended CMOS year: 2000
[ 111.424089] uhci_hcd 0000:00:1a.0: port 1 portsc 008a,00
[ 111.424098] hub 3-0:1.0: port 1: status 0100 change 0003
[ 111.424141] uhci_hcd 0000:00:1a.1: port 2 portsc 008a,00
[ 111.424148] hub 4-0:1.0: port 2: status 0100 change 0003
[ 111.436176] hub 2-0:1.0: port 4 status 0000.0100 after resume, -19
[ 111.436182] usb 2-4: can't resume, status -19
[ 111.436187] hub 2-0:1.0: logical disconnect on port 4
[ 111.436406] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion
[ 111.436417] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003801 0 ACK
POWER OWNER sig=j CONNECT
[ 111.439007] ehci_hcd 0000:00:1a.7: port 1 reset error -110
[ 111.439014] ehci_hcd 0000:00:1a.7: failed handover port 1: 1100
[ 111.452114] hub 1-0:1.0: hub_resume
[ 111.452128] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 111.452138] hub 1-0:1.0: port 1: status 0501 change 0001
[ 111.452164] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK
POWER OWNER sig=se0 CSC
[ 111.452188] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 111.452196] hub 1-0:1.0: port 6: status 0501 change 0001
[ 111.556170] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00
[ 111.556184] usb 4-2: finish reset-resume
[ 111.556196] usb 1-6: finish reset-resume
[ 111.556215] hub 3-0:1.0: port 1 status 0000.0100 after resume, -19
[ 111.556221] usb 3-1: can't resume, status -19
[ 111.556225] hub 3-0:1.0: logical disconnect on port 1
[ 111.624093] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 111.624135] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 111.626995] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 111.628094] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 111.628104] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 111.632363] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 111.633440] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 111.633448] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 111.634454] ata2.00: configured for UDMA/100
[ 111.668093] usb 4-2: reset full speed USB device number 2 using uhci_hcd
[ 111.768099] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 111.768109] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 111.768117] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 111.814434] btusb 4-2:1.0: no reset_resume for driver btusb?
[ 111.814440] btusb 4-2:1.1: no reset_resume for driver btusb?
[ 111.814447] btusb 4-2:1.0: forced unbind
[ 111.856532] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 111.856544] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 111.868129] firewire_core: rediscovered device fw0
[ 111.912085] usb 1-6: reset high speed USB device number 4 using ehci_hcd
[ 111.914281] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 111.914290] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 111.914299] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 111.968281] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 111.968292] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 111.974163] ata1.00: configured for UDMA/133
[ 112.022159] thinkpad_acpi: restoring fan level to 0x07
[ 112.215418] PM: resume of devices complete after 914.176 msecs
[ 112.215488] btusb 4-2:1.0: usb_probe_interface
[ 112.215495] btusb 4-2:1.0: usb_probe_interface - got id
[ 112.215818] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 1, phase
0, 23 us
[ 112.216487] Restarting tasks ...
[ 112.216580] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 112.216596] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 112.216606] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 112.216615] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 112.216624] hub 2-0:1.0: state 7 ports 6 chg 0010 evt 0000
[ 112.216640] hub 2-0:1.0: port 4, status 0100, change 0000, 12 Mb/s
[ 112.216647] usb 2-4: USB disconnect, device number 3
[ 112.216652] usb 2-4: unregistering device
[ 112.216658] usb 2-4: unregistering interface 2-4:1.0
[ 112.216828] usb 2-4: unregistering interface 2-4:1.1
[ 112.217712] usb 2-4: unregistering interface 2-4:1.2
[ 112.217813] usb 2-4: unregistering interface 2-4:1.3
[ 112.218233] usb 2-4: unregistering interface 2-4:1.4
[ 112.218333] usb 2-4: unregistering interface 2-4:1.5
[ 112.218401] drivers/usb/core/file.c: removing 2 minor
[ 112.218540] usb 2-4: unregistering interface 2-4:1.6
[ 112.218596] drivers/usb/core/file.c: removing 3 minor
[ 112.218730] usb 2-4: unregistering interface 2-4:1.7
[ 112.218790] cdc_ether 2-4:1.7: wwan0: unregister 'cdc_ether'
usb-0000:00:1d.7-4, Mobile Broadband Network Device
[ 112.230494] done.
[ 112.230507] video LNXVIDEO:00: Restoring backlight state
[ 112.248140] usb 2-4: unregistering interface 2-4:1.8
[ 112.248183] usb 2-4: unregistering interface 2-4:1.9
[ 112.248911] usb 2-4: unregistering interface 2-4:1.10
[ 112.248950] usb 2-4: usb_disable_device nuking all URBs
[ 112.249057] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 112.249068] hub 3-0:1.0: port 1, status 0100, change 0000, 12 Mb/s
[ 112.249071] usb 3-1: USB disconnect, device number 3
[ 112.249073] usb 3-1: unregistering device
[ 112.249075] usb 3-1: unregistering interface 3-1:1.0
[ 112.301123] usb 3-1: unregistering interface 3-1:1.1
[ 112.302854] cfg80211: Calling CRDA to update world regulatory domain
[ 112.340228] drivers/usb/core/file.c: removing 0 minor
[ 112.340524] usb 3-1: unregistering interface 3-1:1.2
[ 112.340597] drivers/usb/core/file.c: removing 1 minor
[ 112.340901] usb 3-1: usb_disable_device nuking all URBs
[ 112.364203] hub 4-0:1.0: state 7 ports 2 chg 0004 evt 0004
[ 112.364217] hub 4-0:1.0: port 2, status 0103, change 0000, 12 Mb/s
[ 112.364221] hub 1-0:1.0: state 7 ports 6 chg 0042 evt 0000
[ 112.364229] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 112.424279] ehci_hcd 0000:00:1a.7: port 1 full speed --> companion
[ 112.424285] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003801 0 ACK
POWER OWNER sig=j CONNECT
[ 112.424290] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
[ 112.476234] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0 ACK
POWER OWNER sig=se0 CSC
[ 112.476262] hub 1-0:1.0: port 6, status 0503, change 0000, 480 Mb/s
[ 112.476266] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0002
[ 112.497747] usb usb6: suspend_rh (auto-stop)
[ 112.497773] usb usb8: suspend_rh (auto-stop)
[ 112.497797] usb usb5: suspend_rh (auto-stop)
[ 112.497822] usb usb7: suspend_rh (auto-stop)
[ 112.498328] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 112.498338] uhci_hcd 0000:00:1a.0: port 1 portsc 0093,00
[ 112.498346] hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 112.628041] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status
0x101
[ 112.724081] ata1.00: configured for UDMA/133
[ 112.724094] ata1: EH complete
[ 112.725738] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 112.740141] usb 3-1: new full speed USB device number 4 using uhci_hcd
[ 112.872398] usb 3-1: ep0 maxpacket = 8
[ 112.906346] usb 3-1: skipped 1 descriptor after interface
[ 112.906350] usb 3-1: skipped 1 descriptor after interface
[ 112.906352] usb 3-1: skipped 1 descriptor after interface
[ 112.911340] usb 3-1: default language 0x0409
[ 112.926367] usb 3-1: udev 4, busnum 3, minor = 259
[ 112.926370] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
[ 112.926372] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 112.926374] usb 3-1: Product: USB Receiver
[ 112.926376] usb 3-1: Manufacturer: Logitech
[ 112.926520] usb 3-1: usb_probe_device
[ 112.926524] usb 3-1: configuration #1 chosen from 1 choice
[ 112.932341] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[ 112.932383] usbhid 3-1:1.0: usb_probe_interface
[ 112.932386] usbhid 3-1:1.0: usb_probe_interface - got id
[ 112.934577] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input18
[ 112.934587] uhci_hcd 0000:00:1a.0: reserve dev 4 ep81-INT, period 8, phase
4, 17 us
[ 112.934713] generic-usb 0003:046D:C52B.0007: input,hidraw0: USB HID v1.11
Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
[ 112.934730] usb 3-1: adding 3-1:1.1 (config #1, interface 1)
[ 112.934758] usbhid 3-1:1.1: usb_probe_interface
[ 112.934761] usbhid 3-1:1.1: usb_probe_interface - got id
[ 112.937698] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input19
[ 112.937705] uhci_hcd 0000:00:1a.0: reserve dev 4 ep82-INT, period 2, phase
1, 17 us
[ 112.937799] usbhid 3-1:1.1: looking for a minor, starting at 0
[ 112.937878] generic-usb 0003:046D:C52B.0008: input,hiddev0,hidraw1: USB HID
v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
[ 112.937894] usb 3-1: adding 3-1:1.2 (config #1, interface 2)
[ 112.937922] usbhid 3-1:1.2: usb_probe_interface
[ 112.937924] usbhid 3-1:1.2: usb_probe_interface - got id
[ 112.943341] usbhid 3-1:1.2: looking for a minor, starting at 0
[ 112.943446] generic-usb 0003:046D:C52B.0009: hiddev0,hidraw2: USB HID v1.11
Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input2
[ 112.943490] drivers/usb/core/inode.c: creating file '004'
[ 112.943512] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 113.402971] usb 1-6: link qh4-0001/ffff88010ef86f00 start 2 [1/0 us]
[ 113.420976] usb 1-6: unlink qh4-0001/ffff88010ef86f00 start 2 [1/0 us]
[ 114.824747] hub 5-0:1.0: hub_suspend
[ 114.824766] usb usb5: bus auto-suspend
[ 114.824773] usb usb5: suspend_rh
[ 114.824800] hub 6-0:1.0: hub_suspend
[ 114.824809] usb usb6: bus auto-suspend
[ 114.824814] usb usb6: suspend_rh
[ 114.824839] hub 7-0:1.0: hub_suspend
[ 114.824848] usb usb7: bus auto-suspend
[ 114.824853] usb usb7: suspend_rh
[ 114.824877] hub 8-0:1.0: hub_suspend
[ 114.824885] usb usb8: bus auto-suspend
[ 114.824890] usb usb8: suspend_rh
[ 114.824913] hub 2-0:1.0: hub_suspend
[ 114.824921] usb usb2: bus auto-suspend
[ 114.824928] ehci_hcd 0000:00:1d.7: suspend root hub
[ 115.651308] eth1: authenticate with 00:27:19:d8:98:f2 (try 1)
[ 115.653039] eth1: authenticated
[ 115.671756] eth1: associate with 00:27:19:d8:98:f2 (try 1)
[ 115.677927] eth1: RX AssocResp from 00:27:19:d8:98:f2 (capab=0x431 status=0
aid=2)
[ 115.677936] eth1: associated
[ 115.824078] usb 1-6: usb auto-suspend
[ 115.875129] eth1: deauthenticating from 00:27:19:d8:98:f2 by local choice
(reason=3)
[ 115.885602] cfg80211: Calling CRDA to update world regulatory domain
[ 116.088104] usb usb2: usb wakeup-resume
[ 116.088117] usb usb2: usb auto-resume
[ 116.088124] ehci_hcd 0000:00:1d.7: resume root hub
[ 116.116016] hub 2-0:1.0: hub_resume
[ 116.116032] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 116.116035] hub 2-0:1.0: port 4: status 0501 change 0001
[ 116.155212] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 116.208114] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 116.209595] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 116.220258] hub 2-0:1.0: state 7 ports 6 chg 0010 evt 0000
[ 116.220280] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 116.276289] ehci_hcd 0000:00:1d.7: port 4 high speed
[ 116.276305] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 116.332059] usb 2-4: new high speed USB device number 4 using ehci_hcd
[ 116.488286] ehci_hcd 0000:00:1d.7: port 4 high speed
[ 116.488300] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 117.122592] usb 2-4: skipped 3 descriptors after interface
[ 117.122602] usb 2-4: skipped 4 descriptors after interface
[ 117.122611] usb 2-4: skipped 4 descriptors after interface
[ 117.122619] usb 2-4: skipped 2 descriptors after interface
[ 117.122625] usb 2-4: skipped 2 descriptors after interface
[ 117.122632] usb 2-4: skipped 5 descriptors after interface
[ 117.122642] usb 2-4: skipped 4 descriptors after interface
[ 117.217965] usb 2-4: skipped 3 descriptors after interface
[ 117.217973] usb 2-4: skipped 4 descriptors after interface
[ 117.217982] usb 2-4: skipped 4 descriptors after interface
[ 117.217991] usb 2-4: skipped 2 descriptors after interface
[ 117.217998] usb 2-4: skipped 2 descriptors after interface
[ 117.218005] usb 2-4: skipped 5 descriptors after interface
[ 117.218454] usb 2-4: default language 0x0409
[ 117.232810] usb 2-4: udev 4, busnum 2, minor = 131
[ 117.232817] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
[ 117.232825] usb 2-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 117.232831] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard
Composite Device
[ 117.232837] usb 2-4: Manufacturer: Ericsson
[ 117.232842] usb 2-4: SerialNumber: 3541430228088360
[ 117.233161] usb 2-4: usb_probe_device
[ 117.233170] usb 2-4: configuration #1 chosen from 2 choices
[ 117.236811] usb 2-4: adding 2-4:1.0 (config #1, interface 0)
[ 117.237114] usb 2-4: adding 2-4:1.1 (config #1, interface 1)
[ 117.268281] cdc_acm 2-4:1.1: usb_probe_interface
[ 117.268292] cdc_acm 2-4:1.1: usb_probe_interface - got id
[ 117.268489] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
[ 117.269127] usb 2-4: adding 2-4:1.2 (config #1, interface 2)
[ 117.278054] usb 2-4: adding 2-4:1.3 (config #1, interface 3)
[ 117.282497] cdc_acm 2-4:1.3: usb_probe_interface
[ 117.282507] cdc_acm 2-4:1.3: usb_probe_interface - got id
[ 117.282703] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
[ 117.283280] usb 2-4: adding 2-4:1.4 (config #1, interface 4)
[ 117.289800] usb 2-4: adding 2-4:1.5 (config #1, interface 5)
[ 117.293361] cdc_wdm 2-4:1.5: usb_probe_interface
[ 117.293369] cdc_wdm 2-4:1.5: usb_probe_interface - got id
[ 117.293383] cdc_wdm 2-4:1.5: looking for a minor, starting at 0
[ 117.293513] cdc_wdm 2-4:1.5: cdc-wdm-174: USB WDM device
[ 117.293553] usb 2-4: adding 2-4:1.6 (config #1, interface 6)
[ 117.300128] cdc_wdm 2-4:1.6: usb_probe_interface
[ 117.300135] cdc_wdm 2-4:1.6: usb_probe_interface - got id
[ 117.300149] cdc_wdm 2-4:1.6: looking for a minor, starting at 0
[ 117.300267] cdc_wdm 2-4:1.6: cdc-wdm-173: USB WDM device
[ 117.300310] usb 2-4: adding 2-4:1.7 (config #1, interface 7)
[ 117.303636] cdc_ether 2-4:1.7: usb_probe_interface
[ 117.303644] cdc_ether 2-4:1.7: usb_probe_interface - got id
[ 117.306070] cdc_ether 2-4:1.7: wwan0: register 'cdc_ether' at
usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 117.306118] usb 2-4: adding 2-4:1.8 (config #1, interface 8)
[ 117.310541] usb 2-4: adding 2-4:1.9 (config #1, interface 9)
[ 117.313985] cdc_acm 2-4:1.9: usb_probe_interface
[ 117.313994] cdc_acm 2-4:1.9: usb_probe_interface - got id
[ 117.314192] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
[ 117.314875] usb 2-4: adding 2-4:1.10 (config #1, interface 10)
[ 117.321259] drivers/usb/core/inode.c: creating file '004'
[ 117.840071] hub 1-0:1.0: hub_suspend
[ 117.840088] usb usb1: bus auto-suspend
[ 117.840095] ehci_hcd 0000:00:1a.7: suspend root hub
[ 118.162581] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe
frozen
[ 118.162589] ata1: irq_stat 0x00000040, connection status changed
[ 118.162597] ata1: SError: { CommWake DevExch }
[ 118.162613] ata1: hard resetting link
[ 118.884054] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 118.944309] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 118.944313] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 118.944316] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 119.074309] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 119.074320] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 119.074330] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 119.134032] ata1.00: configured for UDMA/133
[ 119.155372] ata1: EH complete
[ 119.155487] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 120.144468] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 122.158084] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe
frozen
[ 122.158092] ata1: irq_stat 0x00000040, connection status changed
[ 122.158100] ata1: SError: { CommWake DevExch }
[ 122.158115] ata1: hard resetting link
[ 122.884153] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 122.944552] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 122.944563] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 122.944573] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 123.054373] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 123.054384] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 123.054394] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 123.104188] ata1.00: configured for UDMA/133
[ 123.114871] ata1: EH complete
[ 123.318000] eth1: authenticate with 00:27:19:d8:98:f2 (try 1)
[ 123.320286] eth1: authenticated
[ 123.324736] eth1: associate with 00:27:19:d8:98:f2 (try 1)
[ 123.330788] eth1: RX AssocResp from 00:27:19:d8:98:f2 (capab=0x431 status=0
aid=2)
[ 123.330797] eth1: associated
[ 123.339286] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 131.162470] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe
frozen
[ 131.162479] ata1: irq_stat 0x00000040, connection status changed
[ 131.162487] ata1: SError: { CommWake DevExch }
[ 131.162503] ata1: hard resetting link
[ 131.884051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 131.944644] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 131.944656] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 131.944665] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 132.054463] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 132.054474] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 132.054483] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 132.114290] ata1.00: configured for UDMA/133
[ 132.135597] ata1: EH complete
[ 133.763527] e1000e 0000:00:19.0: eth0: Unsupported Speed/Duplex
configuration
[ 133.764440] e1000e 0000:00:19.0: eth0: Unsupported Speed/Duplex
configuration
[ 133.832049] eth1: no IPv6 routers present
[ 134.191440] uhci_hcd 0000:00:1a.2: uhci_pci_suspend
[ 134.191466] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 134.191473] uhci_hcd 0000:00:1a.2: hcd_pci_runtime_suspend: 0
[ 134.191630] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3
[ 134.191851] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[ 134.191859] ehci_hcd 0000:00:1a.7: hcd_pci_runtime_suspend: 0
[ 134.191927] ehci_hcd 0000:00:1a.7: PME# enabled
[ 134.204110] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[ 134.205325] uhci_hcd 0000:00:1d.0: uhci_pci_suspend
[ 134.205343] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 134.205349] uhci_hcd 0000:00:1d.0: hcd_pci_runtime_suspend: 0
[ 134.205468] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 134.312274] usb 2-4: usb auto-suspend
[ 134.398359] uhci_hcd 0000:00:1a.0: release dev 4 ep82-INT, period 2, phase
1, 17 us
[ 134.399348] uhci_hcd 0000:00:1a.0: release dev 4 ep81-INT, period 8, phase
4, 17 us
[ 134.401366] usb 3-1: usb auto-suspend
[ 134.444443] uhci_hcd 0000:00:1a.1: release dev 2 ep81-INT, period 1, phase
0, 23 us
[ 134.447446] usb 4-2: usb auto-suspend
[ 135.278827] e1000e 0000:00:19.0: PME# enabled
[ 136.808101] hub 2-0:1.0: hub_suspend
[ 136.808118] usb usb2: bus auto-suspend
[ 136.808125] ehci_hcd 0000:00:1d.7: suspend root hub
[ 136.808163] hub 3-0:1.0: hub_suspend
[ 136.808171] usb usb3: bus auto-suspend
[ 136.808177] usb usb3: suspend_rh
[ 136.808205] hub 4-0:1.0: hub_suspend
[ 136.808212] usb usb4: bus auto-suspend
[ 136.808217] usb usb4: suspend_rh
[ 136.808259] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 136.808281] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 136.808287] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0
[ 136.808443] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 136.824047] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 136.824056] ehci_hcd 0000:00:1d.7: hcd_pci_runtime_suspend: 0
[ 136.824125] ehci_hcd 0000:00:1d.7: PME# enabled
[ 136.840050] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[ 137.162708] ata1: limiting SATA link speed to 1.5 Gbps
[ 137.162720] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe
frozen
[ 137.162726] ata1: irq_stat 0x00000040, connection status changed
[ 137.162734] ata1: SError: { CommWake DevExch }
[ 137.162749] ata1: hard resetting link
[ 137.884081] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 137.951043] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 137.951054] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 137.951064] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 138.080964] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 138.080975] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 138.080985] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 138.140792] ata1.00: configured for UDMA/133
[ 138.151470] ata1: EH complete
[ 139.152858] iwlagn 0000:03:00.0: Aggregation not enabled for tid 0 because
load = 6
[ 145.568081] iwlagn 0000:03:00.0: iwlagn_tx_agg_start on ra =
00:27:19:d8:98:f2 tid = 0
[ 372.976970] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 372.976981] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 372.977130] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 372.977139] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 372.977156] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 372.977171] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 372.977180] uhci_hcd 0000:00:1a.0: uhci_pci_resume
[ 372.977227] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_resume: 0
[ 372.977238] usb usb3: usb wakeup-resume
[ 372.977247] usb usb3: usb auto-resume
[ 372.977252] usb usb3: wakeup_rh
[ 373.016038] hub 3-0:1.0: hub_resume
[ 373.016057] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 373.016068] hub 3-0:1.0: port 1: status 0103 change 0004
[ 373.016109] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 373.016129] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 373.032084] usb 3-1: usb wakeup-resume
[ 373.032105] usb 3-1: finish resume
[ 373.035104] uhci_hcd 0000:00:1a.0: reserve dev 4 ep81-INT, period 8, phase
4, 17 us
[ 373.035118] uhci_hcd 0000:00:1a.0: reserve dev 4 ep82-INT, period 2, phase
1, 17 us
[ 373.035130] hub 3-0:1.0: resume on port 1, status 0
[ 373.035137] hub 3-0:1.0: port 1, status 0103, change 0004, 12 Mb/s
[ 376.822099] uhci_hcd 0000:00:1a.0: release dev 4 ep82-INT, period 2, phase
1, 17 us
[ 376.823087] uhci_hcd 0000:00:1a.0: release dev 4 ep81-INT, period 8, phase
4, 17 us
[ 376.825089] usb 3-1: usb auto-suspend
[ 378.840072] hub 3-0:1.0: hub_suspend
[ 378.840089] usb usb3: bus auto-suspend
[ 378.840095] usb usb3: suspend_rh
[ 378.840127] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 378.840148] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 378.840155] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0
[ 378.840312] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 398.246091] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 398.246102] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 398.246251] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 398.246260] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 398.246278] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 398.246293] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 398.246302] uhci_hcd 0000:00:1a.0: uhci_pci_resume
[ 398.246351] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_resume: 0
[ 398.246362] usb usb3: usb wakeup-resume
[ 398.246371] usb usb3: usb auto-resume
[ 398.246377] usb usb3: wakeup_rh
[ 398.284030] hub 3-0:1.0: hub_resume
[ 398.284049] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 398.284060] hub 3-0:1.0: port 1: status 0103 change 0004
[ 398.284120] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 398.284139] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 398.300038] usb 3-1: usb wakeup-resume
[ 398.300058] usb 3-1: finish resume
[ 398.303099] uhci_hcd 0000:00:1a.0: reserve dev 4 ep81-INT, period 8, phase
4, 17 us
[ 398.303113] uhci_hcd 0000:00:1a.0: reserve dev 4 ep82-INT, period 2, phase
1, 17 us
[ 398.303126] hub 3-0:1.0: resume on port 1, status 0
[ 398.303133] hub 3-0:1.0: port 1, status 0103, change 0004, 12 Mb/s
[ 401.817116] uhci_hcd 0000:00:1a.0: release dev 4 ep82-INT, period 2, phase
1, 17 us
[ 401.818104] uhci_hcd 0000:00:1a.0: release dev 4 ep81-INT, period 8, phase
4, 17 us
[ 401.820416] usb 3-1: usb auto-suspend
[ 403.836071] hub 3-0:1.0: hub_suspend
[ 403.836089] usb usb3: bus auto-suspend
[ 403.836095] usb usb3: suspend_rh
[ 403.836125] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 403.836147] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 403.836153] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0
[ 403.836311] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 406.394011] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 406.394022] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 406.394169] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 406.394178] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 406.394195] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 406.394209] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 406.394218] uhci_hcd 0000:00:1a.0: uhci_pci_resume
[ 406.394266] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_resume: 0
[ 406.394277] usb usb3: usb wakeup-resume
[ 406.394285] usb usb3: usb auto-resume
[ 406.394291] usb usb3: wakeup_rh
[ 406.432093] hub 3-0:1.0: hub_resume
[ 406.432112] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 406.432122] hub 3-0:1.0: port 1: status 0103 change 0004
[ 406.432201] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 406.432220] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 406.448056] usb 3-1: usb wakeup-resume
[ 406.448073] usb 3-1: finish resume
[ 406.451090] uhci_hcd 0000:00:1a.0: reserve dev 4 ep81-INT, period 8, phase
4, 17 us
[ 406.451105] uhci_hcd 0000:00:1a.0: reserve dev 4 ep82-INT, period 2, phase
1, 17 us
[ 406.451118] hub 3-0:1.0: resume on port 1, status 0
[ 406.451125] hub 3-0:1.0: port 1, status 0103, change 0004, 12 Mb/s
[ 423.818104] uhci_hcd 0000:00:1a.0: release dev 4 ep82-INT, period 2, phase
1, 17 us
[ 423.819092] uhci_hcd 0000:00:1a.0: release dev 4 ep81-INT, period 8, phase
4, 17 us
[ 423.821097] usb 3-1: usb auto-suspend
[ 425.836075] hub 3-0:1.0: hub_suspend
[ 425.836093] usb usb3: bus auto-suspend
[ 425.836099] usb usb3: suspend_rh
[ 425.836129] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 425.836151] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 425.836157] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0
[ 425.836314] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 435.513733] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 435.513744] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 435.513895] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 435.513904] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 435.513922] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 435.513936] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 435.513946] uhci_hcd 0000:00:1a.0: uhci_pci_resume
[ 435.513994] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_resume: 0
[ 435.514005] usb usb3: usb wakeup-resume
[ 435.514014] usb usb3: usb auto-resume
[ 435.514019] usb usb3: wakeup_rh
[ 435.552089] hub 3-0:1.0: hub_resume
[ 435.552109] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 435.552119] hub 3-0:1.0: port 1: status 0103 change 0004
[ 435.552155] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 435.552170] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 435.572055] usb 3-1: usb wakeup-resume
[ 435.572079] usb 3-1: finish resume
[ 435.575129] uhci_hcd 0000:00:1a.0: reserve dev 4 ep81-INT, period 8, phase
4, 17 us
[ 435.575145] uhci_hcd 0000:00:1a.0: reserve dev 4 ep82-INT, period 2, phase
1, 17 us
[ 435.575159] hub 3-0:1.0: resume on port 1, status 0
[ 435.575166] hub 3-0:1.0: port 1, status 0103, change 0004, 12 Mb/s
[ 440.805123] uhci_hcd 0000:00:1a.0: release dev 4 ep82-INT, period 2, phase
1, 17 us
[ 440.806108] uhci_hcd 0000:00:1a.0: release dev 4 ep81-INT, period 8, phase
4, 17 us
[ 440.808148] usb 3-1: usb auto-suspend
[ 442.824072] hub 3-0:1.0: hub_suspend
[ 442.824089] usb usb3: bus auto-suspend
[ 442.824095] usb usb3: suspend_rh
[ 442.824125] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 442.824146] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 442.824153] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0
[ 442.824311] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 445.377488] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 445.377499] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 445.377648] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 445.377657] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 445.377674] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 445.377689] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 445.377698] uhci_hcd 0000:00:1a.0: uhci_pci_resume
[ 445.377746] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_resume: 0
[ 445.377758] usb usb3: usb wakeup-resume
[ 445.377766] usb usb3: usb auto-resume
[ 445.377772] usb usb3: wakeup_rh
[ 445.416060] hub 3-0:1.0: hub_resume
[ 445.416082] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 445.416093] hub 3-0:1.0: port 1: status 0103 change 0004
[ 445.416151] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 445.416170] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 445.432084] usb 3-1: usb wakeup-resume
[ 445.432101] usb 3-1: finish resume
[ 445.435108] uhci_hcd 0000:00:1a.0: reserve dev 4 ep81-INT, period 8, phase
4, 17 us
[ 445.435123] uhci_hcd 0000:00:1a.0: reserve dev 4 ep82-INT, period 2, phase
1, 17 us
[ 445.435136] hub 3-0:1.0: resume on port 1, status 0
[ 445.435143] hub 3-0:1.0: port 1, status 0103, change 0004, 12 Mb/s
[ 448.818097] uhci_hcd 0000:00:1a.0: release dev 4 ep82-INT, period 2, phase
1, 17 us
[ 448.819087] uhci_hcd 0000:00:1a.0: release dev 4 ep81-INT, period 8, phase
4, 17 us
[ 448.821090] usb 3-1: usb auto-suspend
[ 450.836077] hub 3-0:1.0: hub_suspend
[ 450.836094] usb usb3: bus auto-suspend
[ 450.836100] usb usb3: suspend_rh
[ 450.836130] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 450.836152] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 450.836158] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0
[ 450.836315] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 453.390036] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 453.390048] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 453.390195] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 453.390204] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 453.390222] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 453.390236] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 453.390246] uhci_hcd 0000:00:1a.0: uhci_pci_resume
[ 453.390293] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_resume: 0
[ 453.390304] usb usb3: usb wakeup-resume
[ 453.390312] usb usb3: usb auto-resume
[ 453.390318] usb usb3: wakeup_rh
[ 453.428060] hub 3-0:1.0: hub_resume
[ 453.428083] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 453.428093] hub 3-0:1.0: port 1: status 0103 change 0004
[ 453.428143] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 453.428162] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 453.444088] usb 3-1: usb wakeup-resume
[ 453.444105] usb 3-1: finish resume
[ 453.447109] uhci_hcd 0000:00:1a.0: reserve dev 4 ep81-INT, period 8, phase
4, 17 us
[ 453.447124] uhci_hcd 0000:00:1a.0: reserve dev 4 ep82-INT, period 2, phase
1, 17 us
[ 453.447137] hub 3-0:1.0: resume on port 1, status 0
[ 453.447144] hub 3-0:1.0: port 1, status 0103, change 0004, 12 Mb/s
[ 482.822100] uhci_hcd 0000:00:1a.0: release dev 4 ep82-INT, period 2, phase
1, 17 us
[ 482.823089] uhci_hcd 0000:00:1a.0: release dev 4 ep81-INT, period 8, phase
4, 17 us
[ 482.825093] usb 3-1: usb auto-suspend
[ 484.840075] hub 3-0:1.0: hub_suspend
[ 484.840094] usb usb3: bus auto-suspend
[ 484.840100] usb usb3: suspend_rh
[ 484.840130] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 484.840152] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 484.840158] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0
[ 484.840314] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 487.404322] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 487.404333] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 487.404481] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 487.404490] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 487.404507] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 487.404521] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 487.404531] uhci_hcd 0000:00:1a.0: uhci_pci_resume
[ 487.404579] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_resume: 0
[ 487.404590] usb usb3: usb wakeup-resume
[ 487.404599] usb usb3: usb auto-resume
[ 487.404604] usb usb3: wakeup_rh
[ 487.444070] hub 3-0:1.0: hub_resume
[ 487.444090] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 487.444100] hub 3-0:1.0: port 1: status 0103 change 0004
[ 487.444156] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 487.444176] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 487.460098] usb 3-1: usb wakeup-resume
[ 487.460116] usb 3-1: finish resume
[ 487.463113] uhci_hcd 0000:00:1a.0: reserve dev 4 ep81-INT, period 8, phase
4, 17 us
[ 487.463127] uhci_hcd 0000:00:1a.0: reserve dev 4 ep82-INT, period 2, phase
1, 17 us
[ 487.463140] hub 3-0:1.0: resume on port 1, status 0
[ 487.463147] hub 3-0:1.0: port 1, status 0103, change 0004, 12 Mb/s
[ 490.817103] uhci_hcd 0000:00:1a.0: release dev 4 ep82-INT, period 2, phase
1, 17 us
[ 490.818092] uhci_hcd 0000:00:1a.0: release dev 4 ep81-INT, period 8, phase
4, 17 us
[ 490.820457] usb 3-1: usb auto-suspend
[ 492.836071] hub 3-0:1.0: hub_suspend
[ 492.836088] usb usb3: bus auto-suspend
[ 492.836094] usb usb3: suspend_rh
[ 492.836125] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 492.836146] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 492.836153] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0
[ 492.836310] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 495.392092] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 495.392103] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 495.392250] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 495.392259] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 495.392276] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 495.392290] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 495.392299] uhci_hcd 0000:00:1a.0: uhci_pci_resume
[ 495.392347] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_resume: 0
[ 495.392358] usb usb3: usb wakeup-resume
[ 495.392366] usb usb3: usb auto-resume
[ 495.392372] usb usb3: wakeup_rh
[ 495.436056] hub 3-0:1.0: hub_resume
[ 495.436080] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 495.436091] hub 3-0:1.0: port 1: status 0103 change 0004
[ 495.436144] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 495.436163] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 495.452055] usb 3-1: usb wakeup-resume
[ 495.452073] usb 3-1: finish resume
[ 495.455087] uhci_hcd 0000:00:1a.0: reserve dev 4 ep81-INT, period 8, phase
4, 17 us
[ 495.455102] uhci_hcd 0000:00:1a.0: reserve dev 4 ep82-INT, period 2, phase
1, 17 us
[ 495.455115] hub 3-0:1.0: resume on port 1, status 0
[ 495.455122] hub 3-0:1.0: port 1, status 0103, change 0004, 12 Mb/s
[ 501.822099] uhci_hcd 0000:00:1a.0: release dev 4 ep82-INT, period 2, phase
1, 17 us
[ 501.823088] uhci_hcd 0000:00:1a.0: release dev 4 ep81-INT, period 8, phase
4, 17 us
[ 501.825090] usb 3-1: usb auto-suspend
[ 503.840085] hub 3-0:1.0: hub_suspend
[ 503.840102] usb usb3: bus auto-suspend
[ 503.840108] usb usb3: suspend_rh
[ 503.840139] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 503.840161] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 503.840167] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0
[ 503.840331] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 506.395607] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 506.395618] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 506.395766] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 506.395774] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 506.395791] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 506.395806] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 506.395815] uhci_hcd 0000:00:1a.0: uhci_pci_resume
[ 506.395864] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_resume: 0
[ 506.395875] usb usb3: usb wakeup-resume
[ 506.395884] usb usb3: usb auto-resume
[ 506.395889] usb usb3: wakeup_rh
[ 506.432067] hub 3-0:1.0: hub_resume
[ 506.432086] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 506.432097] hub 3-0:1.0: port 1: status 0103 change 0004
[ 506.432146] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 506.432165] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 506.448085] usb 3-1: usb wakeup-resume
[ 506.448102] usb 3-1: finish resume
[ 506.451111] uhci_hcd 0000:00:1a.0: reserve dev 4 ep81-INT, period 8, phase
4, 17 us
[ 506.451126] uhci_hcd 0000:00:1a.0: reserve dev 4 ep82-INT, period 2, phase
1, 17 us
[ 506.451138] hub 3-0:1.0: resume on port 1, status 0
[ 506.451145] hub 3-0:1.0: port 1, status 0103, change 0004, 12 Mb/s
[ 509.818100] uhci_hcd 0000:00:1a.0: release dev 4 ep82-INT, period 2, phase
1, 17 us
[ 509.819090] uhci_hcd 0000:00:1a.0: release dev 4 ep81-INT, period 8, phase
4, 17 us
[ 509.821093] usb 3-1: usb auto-suspend
[ 511.836072] hub 3-0:1.0: hub_suspend
[ 511.836089] usb usb3: bus auto-suspend
[ 511.836095] usb usb3: suspend_rh
[ 511.836126] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 511.836147] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 511.836154] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0
[ 511.836310] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 514.395354] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 514.395366] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 514.395515] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 514.395524] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 514.395542] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 514.395556] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 514.395565] uhci_hcd 0000:00:1a.0: uhci_pci_resume
[ 514.395612] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_resume: 0
[ 514.395623] usb usb3: usb wakeup-resume
[ 514.395632] usb usb3: usb auto-resume
[ 514.395637] usb usb3: wakeup_rh
[ 514.432069] hub 3-0:1.0: hub_resume
[ 514.432089] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 514.432100] hub 3-0:1.0: port 1: status 0103 change 0004
[ 514.432159] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 514.432178] uhci_hcd 0000:00:1a.0: port 1 portsc 0095,01
[ 514.448099] usb 3-1: usb wakeup-resume
[ 514.448116] usb 3-1: finish resume
[ 514.451113] uhci_hcd 0000:00:1a.0: reserve dev 4 ep81-INT, period 8, phase
4, 17 us
[ 514.451128] uhci_hcd 0000:00:1a.0: reserve dev 4 ep82-INT, period 2, phase
1, 17 us
[ 514.451140] hub 3-0:1.0: resume on port 1, status 0
[ 514.451147] hub 3-0:1.0: port 1, status 0103, change 0004, 12 Mb/s
[ 517.030078] uhci_hcd 0000:00:1a.0: release dev 4 ep82-INT, period 2, phase
1, 17 us
[ 517.031092] uhci_hcd 0000:00:1a.0: release dev 4 ep81-INT, period 8, phase
4, 17 us
[ 517.033094] usb 3-1: usb auto-suspend
[ 519.048081] hub 3-0:1.0: hub_suspend
[ 519.048098] usb usb3: bus auto-suspend
[ 519.048104] usb usb3: suspend_rh
[ 519.048135] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 519.048156] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 519.048163] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0
[ 519.048319] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3

--
Arkadiusz Miśkiewicz PLD/Linux Team
arekm / maven.pl http://ftp.pld-linux.org/