2012-02-07 16:08:51

by Naresh Bhat

[permalink] [raw]
Subject: x86_64 arch+SMP ON+linux-2.6.32.46+E1000+KGDBOE = Timed out. Ignoring packet error, continuing...

Hi,

I am trying KGDBOE on the following kernel

Kernel - linux-2.6.32.46 (With SMP set)
Hardware - x86 64bit machine (Intel Nehlaum)
Ethernet - E1000 driver is used

But I am getting the following error

........
............
.................
Breakpoint 2, sys_sync () at fs/sync.c:130
130 wakeup_flusher_threads(0);
(gdb) s
wakeup_flusher_threads (nr_pages=0) at fs/fs-writeback.c:1005
1005 {
(gdb) s

Ignoring packet error, continuing...
Ignoring packet error, continuing...
Ignoring packet error, continuing...


Detailed logs with debug set :
-----------------------------------------

...................
................................
.......................................
Sending packet: $z0,ffffffff810ad687,1#66...Ack
Packet received: OK
target_remove_breakpoint (0x810ad687, xxx) = 0
target_terminal_ours ()
kgdb_register_io_module (new_kgdb_io_ops=0xffffffff81a9d5b0) at
kernel/kgdb.c:1778
1778 }
(gdb) n
Sending packet: $Z0,ffffffff810ad687,1#46...Ack
Packet received: OK
target_insert_breakpoint (0x810ad687, xxx) = 0
target_terminal_inferior ()
Sending packet: $s#73...Ack
target_resume (-1, step, 0)
Packet received: T05thread:0000000000000001;
target_wait (-1, status) = 42000, status->kind = stopped, signal = SIGTRAP
target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
Sending packet: $g#67...Ack
Packet received:
0000000000000000b0d5a981ffffffffffffffff00000000ffffffff0000000086020000000000004602000000000000b07e0b2f0088ffffa87e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005cda0a81ffffffff820300001000000018000000
target_fetch_registers (rip) = 5cda0a81ffffffff 0xffffffff810ada5c -2129995172
target_stopped_by_watchpoint () = 0
target_terminal_inferior ()
Sending packet: $s#73...Ack
target_resume (-1, step, 0)
Packet received: T05thread:0000000000000001;
target_wait (-1, status) = 42000, status->kind = stopped, signal = SIGTRAP
target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
Sending packet: $g#67...Ack
Packet received:
00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000b07e0b2f0088ffffb07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005dda0a81ffffffff820300001000000018000000
target_fetch_registers (rip) = 5dda0a81ffffffff 0xffffffff810ada5d -2129995171
target_stopped_by_watchpoint () = 0
target_terminal_inferior ()
Sending packet: $s#73...Ack
target_resume (-1, step, 0)
Packet received: T05thread:0000000000000001;
target_wait (-1, status) = 42000, status->kind = stopped, signal = SIGTRAP
target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
Sending packet: $g#67...Ack
Packet received:
00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffb87e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005eda0a81ffffffff820300001000000018000000
target_fetch_registers (rip) = 5eda0a81ffffffff 0xffffffff810ada5e -2129995170
target_stopped_by_watchpoint () = 0
target_terminal_inferior ()
Sending packet: $s#73...Ack
target_resume (-1, step, 0)
Packet received: T05thread:0000000000000001;
target_wait (-1, status) = 42000, status->kind = stopped, signal = SIGTRAP
target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
Sending packet: $g#67...Ack
Packet received:
00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffc07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b061030000000000180d3e81ffffffff820300001000000018000000
target_fetch_registers (rip) = 180d3e81ffffffff 0xffffffff813e0d18 -2126639848
target_stopped_by_watchpoint () = 0
target_terminal_ours_for_output ()
Sending packet: $mffffffff813e0d18,1#f8...Ack
Packet received: 85
remote:target_xfer_partial (2, (null), 0xbfe00edb, 0x0,
0xffffffff813e0d18, 1) = 1, bytes = 85
Sending packet: $mffffffff813e0d18,1#f8...Ack
Packet received: 85
remote:target_xfer_partial (2, (null), 0xbfe00edb, 0x0,
0xffffffff813e0d18, 1) = 1, bytes = 85
Sending packet: $mffff88002f0b7ec0,40#be...Ack
Packet received:
e07e0b2f0088ffff510d3e81ffffffff0800000000000000380d3e81ffffffff107f0b2f0088ffff5fa00081ffffffff107f0b2f0088ffffb0bcb881ffffffff
remote:target_xfer_partial (3, (null), 0xa944050, 0x0,
0xffff88002f0b7ec0, 64) = 64, bytes =
e0 7e 0b 2f 00 88 ff ff 51 0d 3e 81 ff ff ff ff ...
remote:target_xfer_partial (4, (null), 0xa944030, 0x0,
0xffff88002f0b7ec8, 8) = 8, bytes =
51 0d 3e 81 ff ff ff ff
remote:target_xfer_partial (4, (null), 0xa944030, 0x0,
0xffff88002f0b7ec0, 8) = 8, bytes =
e0 7e 0b 2f 00 88 ff ff
target_terminal_inferior ()
Sending packet: $s#73...Ack
target_resume (-1, step, 0)
Packet received: T05thread:0000000000000001;
target_wait (-1, status) = 42000, status->kind = stopped, signal = SIGTRAP
target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
Sending packet: $g#67...Ack
Packet received:
00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffc07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000001a0d3e81ffffffff460300001000000018000000
target_fetch_registers (rip) = 1a0d3e81ffffffff 0xffffffff813e0d1a -2126639846
target_stopped_by_watchpoint () = 0
target_terminal_inferior ()
Sending packet: $s#73...Ack
target_resume (-1, step, 0)
Packet received: T05thread:0000000000000001;
target_wait (-1, status) = 42000, status->kind = stopped, signal = SIGTRAP
target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
Sending packet: $g#67...Sending packet: $g#67...Sending packet:
$g#67...Sending packet: $g#67...Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing...
Bad register packet; fetching a new packet
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing...
Bad register packet; fetching a new packet
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing...
Bad register packet; fetching a new packet
Timed out.
..........................
.................................


Please help me to identify any available patch in kernel.org or any
guidance to fix the above error. I will really appreciate your help
on this.


-- Thanks and Regards
"For things to change, we must change"
-Naresh Bhat


2012-02-08 03:03:59

by Yong Zhang

[permalink] [raw]
Subject: Re: x86_64 arch+SMP ON+linux-2.6.32.46+E1000+KGDBOE = Timed out. Ignoring packet error, continuing...

On Tue, Feb 07, 2012 at 09:38:49PM +0530, Naresh Bhat wrote:
> Hi,
>
> I am trying KGDBOE on the following kernel

Is KGDBOE supported by upstream? Actually I don't find it
in the source tree.

Thanks,
Yong

>
> Kernel - linux-2.6.32.46 (With SMP set)
> Hardware - x86 64bit machine (Intel Nehlaum)
> Ethernet - E1000 driver is used
>
> But I am getting the following error
>
> ........
> ............
> .................
> Breakpoint 2, sys_sync () at fs/sync.c:130
> 130 wakeup_flusher_threads(0);
> (gdb) s
> wakeup_flusher_threads (nr_pages=0) at fs/fs-writeback.c:1005
> 1005 {
> (gdb) s
>
> Ignoring packet error, continuing...
> Ignoring packet error, continuing...
> Ignoring packet error, continuing...
>
>
> Detailed logs with debug set :
> -----------------------------------------
>
> ...................
> ................................
> .......................................
> Sending packet: $z0,ffffffff810ad687,1#66...Ack
> Packet received: OK
> target_remove_breakpoint (0x810ad687, xxx) = 0
> target_terminal_ours ()
> kgdb_register_io_module (new_kgdb_io_ops=0xffffffff81a9d5b0) at
> kernel/kgdb.c:1778
> 1778 }
> (gdb) n
> Sending packet: $Z0,ffffffff810ad687,1#46...Ack
> Packet received: OK
> target_insert_breakpoint (0x810ad687, xxx) = 0
> target_terminal_inferior ()
> Sending packet: $s#73...Ack
> target_resume (-1, step, 0)
> Packet received: T05thread:0000000000000001;
> target_wait (-1, status) = 42000, status->kind = stopped, signal = SIGTRAP
> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
> Sending packet: $g#67...Ack
> Packet received:
> 0000000000000000b0d5a981ffffffffffffffff00000000ffffffff0000000086020000000000004602000000000000b07e0b2f0088ffffa87e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005cda0a81ffffffff820300001000000018000000
> target_fetch_registers (rip) = 5cda0a81ffffffff 0xffffffff810ada5c -2129995172
> target_stopped_by_watchpoint () = 0
> target_terminal_inferior ()
> Sending packet: $s#73...Ack
> target_resume (-1, step, 0)
> Packet received: T05thread:0000000000000001;
> target_wait (-1, status) = 42000, status->kind = stopped, signal = SIGTRAP
> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
> Sending packet: $g#67...Ack
> Packet received:
> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000b07e0b2f0088ffffb07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005dda0a81ffffffff820300001000000018000000
> target_fetch_registers (rip) = 5dda0a81ffffffff 0xffffffff810ada5d -2129995171
> target_stopped_by_watchpoint () = 0
> target_terminal_inferior ()
> Sending packet: $s#73...Ack
> target_resume (-1, step, 0)
> Packet received: T05thread:0000000000000001;
> target_wait (-1, status) = 42000, status->kind = stopped, signal = SIGTRAP
> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
> Sending packet: $g#67...Ack
> Packet received:
> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffb87e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005eda0a81ffffffff820300001000000018000000
> target_fetch_registers (rip) = 5eda0a81ffffffff 0xffffffff810ada5e -2129995170
> target_stopped_by_watchpoint () = 0
> target_terminal_inferior ()
> Sending packet: $s#73...Ack
> target_resume (-1, step, 0)
> Packet received: T05thread:0000000000000001;
> target_wait (-1, status) = 42000, status->kind = stopped, signal = SIGTRAP
> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
> Sending packet: $g#67...Ack
> Packet received:
> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffc07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b061030000000000180d3e81ffffffff820300001000000018000000
> target_fetch_registers (rip) = 180d3e81ffffffff 0xffffffff813e0d18 -2126639848
> target_stopped_by_watchpoint () = 0
> target_terminal_ours_for_output ()
> Sending packet: $mffffffff813e0d18,1#f8...Ack
> Packet received: 85
> remote:target_xfer_partial (2, (null), 0xbfe00edb, 0x0,
> 0xffffffff813e0d18, 1) = 1, bytes = 85
> Sending packet: $mffffffff813e0d18,1#f8...Ack
> Packet received: 85
> remote:target_xfer_partial (2, (null), 0xbfe00edb, 0x0,
> 0xffffffff813e0d18, 1) = 1, bytes = 85
> Sending packet: $mffff88002f0b7ec0,40#be...Ack
> Packet received:
> e07e0b2f0088ffff510d3e81ffffffff0800000000000000380d3e81ffffffff107f0b2f0088ffff5fa00081ffffffff107f0b2f0088ffffb0bcb881ffffffff
> remote:target_xfer_partial (3, (null), 0xa944050, 0x0,
> 0xffff88002f0b7ec0, 64) = 64, bytes =
> e0 7e 0b 2f 00 88 ff ff 51 0d 3e 81 ff ff ff ff ...
> remote:target_xfer_partial (4, (null), 0xa944030, 0x0,
> 0xffff88002f0b7ec8, 8) = 8, bytes =
> 51 0d 3e 81 ff ff ff ff
> remote:target_xfer_partial (4, (null), 0xa944030, 0x0,
> 0xffff88002f0b7ec0, 8) = 8, bytes =
> e0 7e 0b 2f 00 88 ff ff
> target_terminal_inferior ()
> Sending packet: $s#73...Ack
> target_resume (-1, step, 0)
> Packet received: T05thread:0000000000000001;
> target_wait (-1, status) = 42000, status->kind = stopped, signal = SIGTRAP
> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
> Sending packet: $g#67...Ack
> Packet received:
> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffc07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000001a0d3e81ffffffff460300001000000018000000
> target_fetch_registers (rip) = 1a0d3e81ffffffff 0xffffffff813e0d1a -2126639846
> target_stopped_by_watchpoint () = 0
> target_terminal_inferior ()
> Sending packet: $s#73...Ack
> target_resume (-1, step, 0)
> Packet received: T05thread:0000000000000001;
> target_wait (-1, status) = 42000, status->kind = stopped, signal = SIGTRAP
> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
> Sending packet: $g#67...Sending packet: $g#67...Sending packet:
> $g#67...Sending packet: $g#67...Timed out.
> Timed out.
> Timed out.
> Ignoring packet error, continuing...
> Bad register packet; fetching a new packet
> Timed out.
> Timed out.
> Timed out.
> Ignoring packet error, continuing...
> Bad register packet; fetching a new packet
> Timed out.
> Timed out.
> Timed out.
> Ignoring packet error, continuing...
> Bad register packet; fetching a new packet
> Timed out.
> ..........................
> .................................
>
>
> Please help me to identify any available patch in kernel.org or any
> guidance to fix the above error. I will really appreciate your help
> on this.
>
>
> -- Thanks and Regards
> "For things to change, we must change"
> -Naresh Bhat
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

--
Only stand for myself

2012-02-08 07:16:10

by Naresh Bhat

[permalink] [raw]
Subject: Re: x86_64 arch+SMP ON+linux-2.6.32.46+E1000+KGDBOE = Timed out. Ignoring packet error, continuing...

Hi Yong,

Yes, I know they have removed the KGDBOE support. I have forward
ported the patch to linux-2.6.32.46 kernel. I was just trying to
understand this issue belongs to which of the category ?

1. Is there any issue with Ethernet driver E1000 issue ?
2. Is it belongs to KGDB ?
3. Is there any kernel SMP hang issue for x86 64bit architecture which
is fixed in upstream kernel ?
4. None of the above and something else is broken ?

Is there any available patch ? any guidance to fix the error in E1000
driver. I will really appreciate your help.

Thanks and Regards
-Naresh Bhat

On 2/8/12, Yong Zhang <[email protected]> wrote:
> On Tue, Feb 07, 2012 at 09:38:49PM +0530, Naresh Bhat wrote:
>> Hi,
>>
>> I am trying KGDBOE on the following kernel
>
> Is KGDBOE supported by upstream? Actually I don't find it
> in the source tree.
>
> Thanks,
> Yong
>
>>
>> Kernel - linux-2.6.32.46 (With SMP set)
>> Hardware - x86 64bit machine (Intel Nehlaum)
>> Ethernet - E1000 driver is used
>>
>> But I am getting the following error
>>
>> ........
>> ............
>> .................
>> Breakpoint 2, sys_sync () at fs/sync.c:130
>> 130 wakeup_flusher_threads(0);
>> (gdb) s
>> wakeup_flusher_threads (nr_pages=0) at fs/fs-writeback.c:1005
>> 1005 {
>> (gdb) s
>>
>> Ignoring packet error, continuing...
>> Ignoring packet error, continuing...
>> Ignoring packet error, continuing...
>>
>>
>> Detailed logs with debug set :
>> -----------------------------------------
>>
>> ...................
>> ................................
>> .......................................
>> Sending packet: $z0,ffffffff810ad687,1#66...Ack
>> Packet received: OK
>> target_remove_breakpoint (0x810ad687, xxx) = 0
>> target_terminal_ours ()
>> kgdb_register_io_module (new_kgdb_io_ops=0xffffffff81a9d5b0) at
>> kernel/kgdb.c:1778
>> 1778 }
>> (gdb) n
>> Sending packet: $Z0,ffffffff810ad687,1#46...Ack
>> Packet received: OK
>> target_insert_breakpoint (0x810ad687, xxx) = 0
>> target_terminal_inferior ()
>> Sending packet: $s#73...Ack
>> target_resume (-1, step, 0)
>> Packet received: T05thread:0000000000000001;
>> target_wait (-1, status) = 42000, status->kind = stopped, signal =
>> SIGTRAP
>> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
>> Sending packet: $g#67...Ack
>> Packet received:
>> 0000000000000000b0d5a981ffffffffffffffff00000000ffffffff0000000086020000000000004602000000000000b07e0b2f0088ffffa87e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005cda0a81ffffffff820300001000000018000000
>> target_fetch_registers (rip) = 5cda0a81ffffffff 0xffffffff810ada5c
>> -2129995172
>> target_stopped_by_watchpoint () = 0
>> target_terminal_inferior ()
>> Sending packet: $s#73...Ack
>> target_resume (-1, step, 0)
>> Packet received: T05thread:0000000000000001;
>> target_wait (-1, status) = 42000, status->kind = stopped, signal =
>> SIGTRAP
>> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
>> Sending packet: $g#67...Ack
>> Packet received:
>> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000b07e0b2f0088ffffb07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005dda0a81ffffffff820300001000000018000000
>> target_fetch_registers (rip) = 5dda0a81ffffffff 0xffffffff810ada5d
>> -2129995171
>> target_stopped_by_watchpoint () = 0
>> target_terminal_inferior ()
>> Sending packet: $s#73...Ack
>> target_resume (-1, step, 0)
>> Packet received: T05thread:0000000000000001;
>> target_wait (-1, status) = 42000, status->kind = stopped, signal =
>> SIGTRAP
>> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
>> Sending packet: $g#67...Ack
>> Packet received:
>> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffb87e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005eda0a81ffffffff820300001000000018000000
>> target_fetch_registers (rip) = 5eda0a81ffffffff 0xffffffff810ada5e
>> -2129995170
>> target_stopped_by_watchpoint () = 0
>> target_terminal_inferior ()
>> Sending packet: $s#73...Ack
>> target_resume (-1, step, 0)
>> Packet received: T05thread:0000000000000001;
>> target_wait (-1, status) = 42000, status->kind = stopped, signal =
>> SIGTRAP
>> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
>> Sending packet: $g#67...Ack
>> Packet received:
>> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffc07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b061030000000000180d3e81ffffffff820300001000000018000000
>> target_fetch_registers (rip) = 180d3e81ffffffff 0xffffffff813e0d18
>> -2126639848
>> target_stopped_by_watchpoint () = 0
>> target_terminal_ours_for_output ()
>> Sending packet: $mffffffff813e0d18,1#f8...Ack
>> Packet received: 85
>> remote:target_xfer_partial (2, (null), 0xbfe00edb, 0x0,
>> 0xffffffff813e0d18, 1) = 1, bytes = 85
>> Sending packet: $mffffffff813e0d18,1#f8...Ack
>> Packet received: 85
>> remote:target_xfer_partial (2, (null), 0xbfe00edb, 0x0,
>> 0xffffffff813e0d18, 1) = 1, bytes = 85
>> Sending packet: $mffff88002f0b7ec0,40#be...Ack
>> Packet received:
>> e07e0b2f0088ffff510d3e81ffffffff0800000000000000380d3e81ffffffff107f0b2f0088ffff5fa00081ffffffff107f0b2f0088ffffb0bcb881ffffffff
>> remote:target_xfer_partial (3, (null), 0xa944050, 0x0,
>> 0xffff88002f0b7ec0, 64) = 64, bytes =
>> e0 7e 0b 2f 00 88 ff ff 51 0d 3e 81 ff ff ff ff ...
>> remote:target_xfer_partial (4, (null), 0xa944030, 0x0,
>> 0xffff88002f0b7ec8, 8) = 8, bytes =
>> 51 0d 3e 81 ff ff ff ff
>> remote:target_xfer_partial (4, (null), 0xa944030, 0x0,
>> 0xffff88002f0b7ec0, 8) = 8, bytes =
>> e0 7e 0b 2f 00 88 ff ff
>> target_terminal_inferior ()
>> Sending packet: $s#73...Ack
>> target_resume (-1, step, 0)
>> Packet received: T05thread:0000000000000001;
>> target_wait (-1, status) = 42000, status->kind = stopped, signal =
>> SIGTRAP
>> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
>> Sending packet: $g#67...Ack
>> Packet received:
>> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffc07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000001a0d3e81ffffffff460300001000000018000000
>> target_fetch_registers (rip) = 1a0d3e81ffffffff 0xffffffff813e0d1a
>> -2126639846
>> target_stopped_by_watchpoint () = 0
>> target_terminal_inferior ()
>> Sending packet: $s#73...Ack
>> target_resume (-1, step, 0)
>> Packet received: T05thread:0000000000000001;
>> target_wait (-1, status) = 42000, status->kind = stopped, signal =
>> SIGTRAP
>> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
>> Sending packet: $g#67...Sending packet: $g#67...Sending packet:
>> $g#67...Sending packet: $g#67...Timed out.
>> Timed out.
>> Timed out.
>> Ignoring packet error, continuing...
>> Bad register packet; fetching a new packet
>> Timed out.
>> Timed out.
>> Timed out.
>> Ignoring packet error, continuing...
>> Bad register packet; fetching a new packet
>> Timed out.
>> Timed out.
>> Timed out.
>> Ignoring packet error, continuing...
>> Bad register packet; fetching a new packet
>> Timed out.
>> ..........................
>> .................................
>>
>>
>> Please help me to identify any available patch in kernel.org or any
>> guidance to fix the above error. I will really appreciate your help
>> on this.
>>
>>
>> -- Thanks and Regards
>> "For things to change, we must change"
>> -Naresh Bhat
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to [email protected]
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>
> --
> Only stand for myself
>

2012-02-08 07:55:13

by Yong Zhang

[permalink] [raw]
Subject: Re: x86_64 arch+SMP ON+linux-2.6.32.46+E1000+KGDBOE = Timed out. Ignoring packet error, continuing...

On Wed, Feb 08, 2012 at 12:46:04PM +0530, Naresh Bhat wrote:
> Hi Yong,
>
> Yes, I know they have removed the KGDBOE support. I have forward
> ported the patch to linux-2.6.32.46 kernel. I was just trying to
> understand this issue belongs to which of the category ?

Maybe you can try with other KGDB method to debug your system, like
KGDB_SERIAL_CONSOLE.
Thus you can narrow down your problem.

Thanks,
Yong

>
> 1. Is there any issue with Ethernet driver E1000 issue ?
> 2. Is it belongs to KGDB ?
> 3. Is there any kernel SMP hang issue for x86 64bit architecture which
> is fixed in upstream kernel ?
> 4. None of the above and something else is broken ?
>
> Is there any available patch ? any guidance to fix the error in E1000
> driver. I will really appreciate your help.
>
> Thanks and Regards
> -Naresh Bhat
>
> On 2/8/12, Yong Zhang <[email protected]> wrote:
> > On Tue, Feb 07, 2012 at 09:38:49PM +0530, Naresh Bhat wrote:
> >> Hi,
> >>
> >> I am trying KGDBOE on the following kernel
> >
> > Is KGDBOE supported by upstream? Actually I don't find it
> > in the source tree.
> >
> > Thanks,
> > Yong
> >
> >>
> >> Kernel - linux-2.6.32.46 (With SMP set)
> >> Hardware - x86 64bit machine (Intel Nehlaum)
> >> Ethernet - E1000 driver is used
> >>
> >> But I am getting the following error
> >>
> >> ........
> >> ............
> >> .................
> >> Breakpoint 2, sys_sync () at fs/sync.c:130
> >> 130 wakeup_flusher_threads(0);
> >> (gdb) s
> >> wakeup_flusher_threads (nr_pages=0) at fs/fs-writeback.c:1005
> >> 1005 {
> >> (gdb) s
> >>
> >> Ignoring packet error, continuing...
> >> Ignoring packet error, continuing...
> >> Ignoring packet error, continuing...
> >>
> >>
> >> Detailed logs with debug set :
> >> -----------------------------------------
> >>
> >> ...................
> >> ................................
> >> .......................................
> >> Sending packet: $z0,ffffffff810ad687,1#66...Ack
> >> Packet received: OK
> >> target_remove_breakpoint (0x810ad687, xxx) = 0
> >> target_terminal_ours ()
> >> kgdb_register_io_module (new_kgdb_io_ops=0xffffffff81a9d5b0) at
> >> kernel/kgdb.c:1778
> >> 1778 }
> >> (gdb) n
> >> Sending packet: $Z0,ffffffff810ad687,1#46...Ack
> >> Packet received: OK
> >> target_insert_breakpoint (0x810ad687, xxx) = 0
> >> target_terminal_inferior ()
> >> Sending packet: $s#73...Ack
> >> target_resume (-1, step, 0)
> >> Packet received: T05thread:0000000000000001;
> >> target_wait (-1, status) = 42000, status->kind = stopped, signal =
> >> SIGTRAP
> >> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
> >> Sending packet: $g#67...Ack
> >> Packet received:
> >> 0000000000000000b0d5a981ffffffffffffffff00000000ffffffff0000000086020000000000004602000000000000b07e0b2f0088ffffa87e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005cda0a81ffffffff820300001000000018000000
> >> target_fetch_registers (rip) = 5cda0a81ffffffff 0xffffffff810ada5c
> >> -2129995172
> >> target_stopped_by_watchpoint () = 0
> >> target_terminal_inferior ()
> >> Sending packet: $s#73...Ack
> >> target_resume (-1, step, 0)
> >> Packet received: T05thread:0000000000000001;
> >> target_wait (-1, status) = 42000, status->kind = stopped, signal =
> >> SIGTRAP
> >> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
> >> Sending packet: $g#67...Ack
> >> Packet received:
> >> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000b07e0b2f0088ffffb07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005dda0a81ffffffff820300001000000018000000
> >> target_fetch_registers (rip) = 5dda0a81ffffffff 0xffffffff810ada5d
> >> -2129995171
> >> target_stopped_by_watchpoint () = 0
> >> target_terminal_inferior ()
> >> Sending packet: $s#73...Ack
> >> target_resume (-1, step, 0)
> >> Packet received: T05thread:0000000000000001;
> >> target_wait (-1, status) = 42000, status->kind = stopped, signal =
> >> SIGTRAP
> >> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
> >> Sending packet: $g#67...Ack
> >> Packet received:
> >> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffb87e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005eda0a81ffffffff820300001000000018000000
> >> target_fetch_registers (rip) = 5eda0a81ffffffff 0xffffffff810ada5e
> >> -2129995170
> >> target_stopped_by_watchpoint () = 0
> >> target_terminal_inferior ()
> >> Sending packet: $s#73...Ack
> >> target_resume (-1, step, 0)
> >> Packet received: T05thread:0000000000000001;
> >> target_wait (-1, status) = 42000, status->kind = stopped, signal =
> >> SIGTRAP
> >> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
> >> Sending packet: $g#67...Ack
> >> Packet received:
> >> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffc07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b061030000000000180d3e81ffffffff820300001000000018000000
> >> target_fetch_registers (rip) = 180d3e81ffffffff 0xffffffff813e0d18
> >> -2126639848
> >> target_stopped_by_watchpoint () = 0
> >> target_terminal_ours_for_output ()
> >> Sending packet: $mffffffff813e0d18,1#f8...Ack
> >> Packet received: 85
> >> remote:target_xfer_partial (2, (null), 0xbfe00edb, 0x0,
> >> 0xffffffff813e0d18, 1) = 1, bytes = 85
> >> Sending packet: $mffffffff813e0d18,1#f8...Ack
> >> Packet received: 85
> >> remote:target_xfer_partial (2, (null), 0xbfe00edb, 0x0,
> >> 0xffffffff813e0d18, 1) = 1, bytes = 85
> >> Sending packet: $mffff88002f0b7ec0,40#be...Ack
> >> Packet received:
> >> e07e0b2f0088ffff510d3e81ffffffff0800000000000000380d3e81ffffffff107f0b2f0088ffff5fa00081ffffffff107f0b2f0088ffffb0bcb881ffffffff
> >> remote:target_xfer_partial (3, (null), 0xa944050, 0x0,
> >> 0xffff88002f0b7ec0, 64) = 64, bytes =
> >> e0 7e 0b 2f 00 88 ff ff 51 0d 3e 81 ff ff ff ff ...
> >> remote:target_xfer_partial (4, (null), 0xa944030, 0x0,
> >> 0xffff88002f0b7ec8, 8) = 8, bytes =
> >> 51 0d 3e 81 ff ff ff ff
> >> remote:target_xfer_partial (4, (null), 0xa944030, 0x0,
> >> 0xffff88002f0b7ec0, 8) = 8, bytes =
> >> e0 7e 0b 2f 00 88 ff ff
> >> target_terminal_inferior ()
> >> Sending packet: $s#73...Ack
> >> target_resume (-1, step, 0)
> >> Packet received: T05thread:0000000000000001;
> >> target_wait (-1, status) = 42000, status->kind = stopped, signal =
> >> SIGTRAP
> >> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
> >> Sending packet: $g#67...Ack
> >> Packet received:
> >> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffc07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000001a0d3e81ffffffff460300001000000018000000
> >> target_fetch_registers (rip) = 1a0d3e81ffffffff 0xffffffff813e0d1a
> >> -2126639846
> >> target_stopped_by_watchpoint () = 0
> >> target_terminal_inferior ()
> >> Sending packet: $s#73...Ack
> >> target_resume (-1, step, 0)
> >> Packet received: T05thread:0000000000000001;
> >> target_wait (-1, status) = 42000, status->kind = stopped, signal =
> >> SIGTRAP
> >> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
> >> Sending packet: $g#67...Sending packet: $g#67...Sending packet:
> >> $g#67...Sending packet: $g#67...Timed out.
> >> Timed out.
> >> Timed out.
> >> Ignoring packet error, continuing...
> >> Bad register packet; fetching a new packet
> >> Timed out.
> >> Timed out.
> >> Timed out.
> >> Ignoring packet error, continuing...
> >> Bad register packet; fetching a new packet
> >> Timed out.
> >> Timed out.
> >> Timed out.
> >> Ignoring packet error, continuing...
> >> Bad register packet; fetching a new packet
> >> Timed out.
> >> ..........................
> >> .................................
> >>
> >>
> >> Please help me to identify any available patch in kernel.org or any
> >> guidance to fix the above error. I will really appreciate your help
> >> on this.
> >>
> >>
> >> -- Thanks and Regards
> >> "For things to change, we must change"
> >> -Naresh Bhat
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> >> the body of a message to [email protected]
> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
> >> Please read the FAQ at http://www.tux.org/lkml/
> >
> > --
> > Only stand for myself
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

--
Only stand for myself

2012-02-08 08:14:12

by Naresh Bhat

[permalink] [raw]
Subject: Re: x86_64 arch+SMP ON+linux-2.6.32.46+E1000+KGDBOE = Timed out. Ignoring packet error, continuing...

Hi Yong,

Thank you very much for the suggestion.

Yes, I am able to use other KGDB methods like KGDB over serial,
console..But I want to make it work KGDBOE. Hence I am requesting is
there anybody tried and come across the "Ignoring packet error,
continuing..." error ?

Thanks
-Naresh Bhat

On 2/8/12, Yong Zhang <[email protected]> wrote:
> On Wed, Feb 08, 2012 at 12:46:04PM +0530, Naresh Bhat wrote:
>> Hi Yong,
>>
>> Yes, I know they have removed the KGDBOE support. I have forward
>> ported the patch to linux-2.6.32.46 kernel. I was just trying to
>> understand this issue belongs to which of the category ?
>
> Maybe you can try with other KGDB method to debug your system, like
> KGDB_SERIAL_CONSOLE.
> Thus you can narrow down your problem.
>
> Thanks,
> Yong
>
>>
>> 1. Is there any issue with Ethernet driver E1000 issue ?
>> 2. Is it belongs to KGDB ?
>> 3. Is there any kernel SMP hang issue for x86 64bit architecture which
>> is fixed in upstream kernel ?
>> 4. None of the above and something else is broken ?
>>
>> Is there any available patch ? any guidance to fix the error in E1000
>> driver. I will really appreciate your help.
>>
>> Thanks and Regards
>> -Naresh Bhat
>>
>> On 2/8/12, Yong Zhang <[email protected]> wrote:
>> > On Tue, Feb 07, 2012 at 09:38:49PM +0530, Naresh Bhat wrote:
>> >> Hi,
>> >>
>> >> I am trying KGDBOE on the following kernel
>> >
>> > Is KGDBOE supported by upstream? Actually I don't find it
>> > in the source tree.
>> >
>> > Thanks,
>> > Yong
>> >
>> >>
>> >> Kernel - linux-2.6.32.46 (With SMP set)
>> >> Hardware - x86 64bit machine (Intel Nehlaum)
>> >> Ethernet - E1000 driver is used
>> >>
>> >> But I am getting the following error
>> >>
>> >> ........
>> >> ............
>> >> .................
>> >> Breakpoint 2, sys_sync () at fs/sync.c:130
>> >> 130 wakeup_flusher_threads(0);
>> >> (gdb) s
>> >> wakeup_flusher_threads (nr_pages=0) at fs/fs-writeback.c:1005
>> >> 1005 {
>> >> (gdb) s
>> >>
>> >> Ignoring packet error, continuing...
>> >> Ignoring packet error, continuing...
>> >> Ignoring packet error, continuing...
>> >>
>> >>
>> >> Detailed logs with debug set :
>> >> -----------------------------------------
>> >>
>> >> ...................
>> >> ................................
>> >> .......................................
>> >> Sending packet: $z0,ffffffff810ad687,1#66...Ack
>> >> Packet received: OK
>> >> target_remove_breakpoint (0x810ad687, xxx) = 0
>> >> target_terminal_ours ()
>> >> kgdb_register_io_module (new_kgdb_io_ops=0xffffffff81a9d5b0) at
>> >> kernel/kgdb.c:1778
>> >> 1778 }
>> >> (gdb) n
>> >> Sending packet: $Z0,ffffffff810ad687,1#46...Ack
>> >> Packet received: OK
>> >> target_insert_breakpoint (0x810ad687, xxx) = 0
>> >> target_terminal_inferior ()
>> >> Sending packet: $s#73...Ack
>> >> target_resume (-1, step, 0)
>> >> Packet received: T05thread:0000000000000001;
>> >> target_wait (-1, status) = 42000, status->kind = stopped, signal =
>> >> SIGTRAP
>> >> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
>> >> Sending packet: $g#67...Ack
>> >> Packet received:
>> >> 0000000000000000b0d5a981ffffffffffffffff00000000ffffffff0000000086020000000000004602000000000000b07e0b2f0088ffffa87e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005cda0a81ffffffff820300001000000018000000
>> >> target_fetch_registers (rip) = 5cda0a81ffffffff 0xffffffff810ada5c
>> >> -2129995172
>> >> target_stopped_by_watchpoint () = 0
>> >> target_terminal_inferior ()
>> >> Sending packet: $s#73...Ack
>> >> target_resume (-1, step, 0)
>> >> Packet received: T05thread:0000000000000001;
>> >> target_wait (-1, status) = 42000, status->kind = stopped, signal =
>> >> SIGTRAP
>> >> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
>> >> Sending packet: $g#67...Ack
>> >> Packet received:
>> >> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000b07e0b2f0088ffffb07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005dda0a81ffffffff820300001000000018000000
>> >> target_fetch_registers (rip) = 5dda0a81ffffffff 0xffffffff810ada5d
>> >> -2129995171
>> >> target_stopped_by_watchpoint () = 0
>> >> target_terminal_inferior ()
>> >> Sending packet: $s#73...Ack
>> >> target_resume (-1, step, 0)
>> >> Packet received: T05thread:0000000000000001;
>> >> target_wait (-1, status) = 42000, status->kind = stopped, signal =
>> >> SIGTRAP
>> >> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
>> >> Sending packet: $g#67...Ack
>> >> Packet received:
>> >> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffb87e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000005eda0a81ffffffff820300001000000018000000
>> >> target_fetch_registers (rip) = 5eda0a81ffffffff 0xffffffff810ada5e
>> >> -2129995170
>> >> target_stopped_by_watchpoint () = 0
>> >> target_terminal_inferior ()
>> >> Sending packet: $s#73...Ack
>> >> target_resume (-1, step, 0)
>> >> Packet received: T05thread:0000000000000001;
>> >> target_wait (-1, status) = 42000, status->kind = stopped, signal =
>> >> SIGTRAP
>> >> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
>> >> Sending packet: $g#67...Ack
>> >> Packet received:
>> >> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffc07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b061030000000000180d3e81ffffffff820300001000000018000000
>> >> target_fetch_registers (rip) = 180d3e81ffffffff 0xffffffff813e0d18
>> >> -2126639848
>> >> target_stopped_by_watchpoint () = 0
>> >> target_terminal_ours_for_output ()
>> >> Sending packet: $mffffffff813e0d18,1#f8...Ack
>> >> Packet received: 85
>> >> remote:target_xfer_partial (2, (null), 0xbfe00edb, 0x0,
>> >> 0xffffffff813e0d18, 1) = 1, bytes = 85
>> >> Sending packet: $mffffffff813e0d18,1#f8...Ack
>> >> Packet received: 85
>> >> remote:target_xfer_partial (2, (null), 0xbfe00edb, 0x0,
>> >> 0xffffffff813e0d18, 1) = 1, bytes = 85
>> >> Sending packet: $mffff88002f0b7ec0,40#be...Ack
>> >> Packet received:
>> >> e07e0b2f0088ffff510d3e81ffffffff0800000000000000380d3e81ffffffff107f0b2f0088ffff5fa00081ffffffff107f0b2f0088ffffb0bcb881ffffffff
>> >> remote:target_xfer_partial (3, (null), 0xa944050, 0x0,
>> >> 0xffff88002f0b7ec0, 64) = 64, bytes =
>> >> e0 7e 0b 2f 00 88 ff ff 51 0d 3e 81 ff ff ff ff ...
>> >> remote:target_xfer_partial (4, (null), 0xa944030, 0x0,
>> >> 0xffff88002f0b7ec8, 8) = 8, bytes =
>> >> 51 0d 3e 81 ff ff ff ff
>> >> remote:target_xfer_partial (4, (null), 0xa944030, 0x0,
>> >> 0xffff88002f0b7ec0, 8) = 8, bytes =
>> >> e0 7e 0b 2f 00 88 ff ff
>> >> target_terminal_inferior ()
>> >> Sending packet: $s#73...Ack
>> >> target_resume (-1, step, 0)
>> >> Packet received: T05thread:0000000000000001;
>> >> target_wait (-1, status) = 42000, status->kind = stopped, signal =
>> >> SIGTRAP
>> >> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
>> >> Sending packet: $g#67...Ack
>> >> Packet received:
>> >> 00000000000000000000000000000000ffffffff00000000ffffffff0000000086020000000000004602000000000000c07e0b2f0088ffffc07e0b2f0088ffff000000000000000058f8b081ffffffff507d0b2f0088ffff18b20681ffffffff000000000000000008000000000000000800000000000000b0610300000000001a0d3e81ffffffff460300001000000018000000
>> >> target_fetch_registers (rip) = 1a0d3e81ffffffff 0xffffffff813e0d1a
>> >> -2126639846
>> >> target_stopped_by_watchpoint () = 0
>> >> target_terminal_inferior ()
>> >> Sending packet: $s#73...Ack
>> >> target_resume (-1, step, 0)
>> >> Packet received: T05thread:0000000000000001;
>> >> target_wait (-1, status) = 42000, status->kind = stopped, signal =
>> >> SIGTRAP
>> >> target_thread_architecture (Thread 1) = 0xa2e45c0 [i386:x86-64]
>> >> Sending packet: $g#67...Sending packet: $g#67...Sending packet:
>> >> $g#67...Sending packet: $g#67...Timed out.
>> >> Timed out.
>> >> Timed out.
>> >> Ignoring packet error, continuing...
>> >> Bad register packet; fetching a new packet
>> >> Timed out.
>> >> Timed out.
>> >> Timed out.
>> >> Ignoring packet error, continuing...
>> >> Bad register packet; fetching a new packet
>> >> Timed out.
>> >> Timed out.
>> >> Timed out.
>> >> Ignoring packet error, continuing...
>> >> Bad register packet; fetching a new packet
>> >> Timed out.
>> >> ..........................
>> >> .................................
>> >>
>> >>
>> >> Please help me to identify any available patch in kernel.org or any
>> >> guidance to fix the above error. I will really appreciate your help
>> >> on this.
>> >>
>> >>
>> >> -- Thanks and Regards
>> >> "For things to change, we must change"
>> >> -Naresh Bhat
>> >> --
>> >> To unsubscribe from this list: send the line "unsubscribe linux-kernel"
>> >> in
>> >> the body of a message to [email protected]
>> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> >> Please read the FAQ at http://www.tux.org/lkml/
>> >
>> > --
>> > Only stand for myself
>> >
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to [email protected]
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>
> --
> Only stand for myself
>