Adds GPIO based IR Receiver driver. It decodes signals using decoders
available in rc framework.
Signed-off-by: Ravi Kumar V <[email protected]>
---
drivers/media/rc/Kconfig | 9 ++
drivers/media/rc/Makefile | 1 +
drivers/media/rc/gpio-ir-recv.c | 189 +++++++++++++++++++++++++++++++++++++++
include/media/gpio-ir-recv.h | 23 +++++
4 files changed, 222 insertions(+), 0 deletions(-)
create mode 100644 drivers/media/rc/gpio-ir-recv.c
create mode 100644 include/media/gpio-ir-recv.h
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index aeb7f43..6f63ded 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -256,4 +256,13 @@ config RC_LOOPBACK
To compile this driver as a module, choose M here: the module will
be called rc_loopback.
+config IR_GPIO_CIR
+ tristate "GPIO IR remote control"
+ depends on RC_CORE
+ ---help---
+ Say Y if you want to use GPIO based IR Receiver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called gpio-ir-recv.
+
endif #RC_CORE
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 2156e78..9b3568e 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -25,3 +25,4 @@ obj-$(CONFIG_IR_REDRAT3) += redrat3.o
obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o
+obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c
new file mode 100644
index 0000000..cf6e7f6
--- /dev/null
+++ b/drivers/media/rc/gpio-ir-recv.c
@@ -0,0 +1,189 @@
+/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <media/rc-core.h>
+#include <media/gpio-ir-recv.h>
+
+#define GPIO_IR_DRIVER_NAME "gpio-rc-recv"
+#define GPIO_IR_DEVICE_NAME "gpio_ir_recv"
+
+struct gpio_rc_dev {
+ struct rc_dev *rcdev;
+ struct mutex lock;
+ unsigned int gpio_nr;
+ bool active_low;
+ bool can_wakeup;
+};
+
+static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id)
+{
+ struct gpio_rc_dev *gpio_dev = dev_id;
+ unsigned int gval;
+ int rc = 0;
+ enum raw_event_type type = IR_SPACE;
+
+ mutex_lock(&gpio_dev->lock);
+ gval = gpio_get_value_cansleep(gpio_dev->gpio_nr);
+
+ if (gval < 0)
+ goto err_get_value;
+
+ if (gpio_dev->active_low)
+ gval = !gval;
+
+ if (gval == 1)
+ type = IR_PULSE;
+
+ rc = ir_raw_event_store_edge(gpio_dev->rcdev, type);
+ if (rc < 0)
+ goto err_get_value;
+
+ ir_raw_event_handle(gpio_dev->rcdev);
+
+err_get_value:
+ mutex_unlock(&gpio_dev->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit gpio_ir_recv_probe(struct platform_device *pdev)
+{
+ struct gpio_rc_dev *gpio_dev;
+ struct rc_dev *rcdev;
+ const struct gpio_ir_recv_platform_data *pdata =
+ pdev->dev.platform_data;
+ int rc;
+
+ if (!pdata)
+ return -EINVAL;
+
+ if (pdata->gpio_nr < 0)
+ return -EINVAL;
+
+ gpio_dev = kzalloc(sizeof(struct gpio_rc_dev), GFP_KERNEL);
+ if (!gpio_dev)
+ return -ENOMEM;
+
+ mutex_init(&gpio_dev->lock);
+
+ rcdev = rc_allocate_device();
+ if (!rcdev) {
+ rc = -ENOMEM;
+ goto err_allocate_device;
+ }
+
+ rcdev->driver_type = RC_DRIVER_IR_RAW;
+ rcdev->allowed_protos = RC_TYPE_NEC;
+ rcdev->input_name = GPIO_IR_DEVICE_NAME;
+ rcdev->input_id.bustype = BUS_HOST;
+ rcdev->driver_name = GPIO_IR_DRIVER_NAME;
+ rcdev->map_name = RC_MAP_EMPTY;
+
+ gpio_dev->rcdev = rcdev;
+ gpio_dev->gpio_nr = pdata->gpio_nr;
+ gpio_dev->active_low = pdata->active_low;
+ gpio_dev->can_wakeup = pdata->can_wakeup;
+
+
+ rc = gpio_request(pdata->gpio_nr, "gpio-ir-recv");
+ if (rc < 0)
+ goto err_gpio_request;
+ rc = gpio_direction_input(pdata->gpio_nr);
+ if (rc < 0)
+ goto err_gpio_direction_input;
+
+ rc = rc_register_device(rcdev);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "failed to register rc device\n");
+ goto err_register_rc_device;
+ }
+
+ platform_set_drvdata(pdev, gpio_dev);
+
+ rc = request_threaded_irq(gpio_to_irq(pdata->gpio_nr),
+ NULL, gpio_ir_recv_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "gpio-ir-recv-irq", gpio_dev);
+ if (rc < 0)
+ goto err_request_irq;
+
+ if (pdata->can_wakeup == true) {
+ rc = enable_irq_wake(gpio_to_irq(pdata->gpio_nr));
+ if (rc < 0)
+ goto err_enable_irq_wake;
+ }
+
+ return 0;
+
+err_enable_irq_wake:
+ free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev);
+err_request_irq:
+ platform_set_drvdata(pdev, NULL);
+ rc_unregister_device(rcdev);
+err_register_rc_device:
+err_gpio_direction_input:
+ gpio_free(pdata->gpio_nr);
+err_gpio_request:
+ rc_free_device(rcdev);
+ rcdev = NULL;
+err_allocate_device:
+ mutex_destroy(&gpio_dev->lock);
+ kfree(gpio_dev);
+ return rc;
+}
+
+static int __devexit gpio_ir_recv_remove(struct platform_device *pdev)
+{
+ struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
+
+ disable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr));
+ free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev);
+ platform_set_drvdata(pdev, NULL);
+ rc_unregister_device(gpio_dev->rcdev);
+ gpio_free(gpio_dev->gpio_nr);
+ rc_free_device(gpio_dev->rcdev);
+ mutex_destroy(&gpio_dev->lock);
+ kfree(gpio_dev);
+ return 0;
+}
+
+static struct platform_driver gpio_ir_recv_driver = {
+ .probe = gpio_ir_recv_probe,
+ .remove = __devexit_p(gpio_ir_recv_remove),
+ .driver = {
+ .name = GPIO_IR_DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init gpio_ir_recv_init(void)
+{
+ return platform_driver_register(&gpio_ir_recv_driver);
+}
+module_init(gpio_ir_recv_init);
+
+static void __exit gpio_ir_recv_exit(void)
+{
+ platform_driver_unregister(&gpio_ir_recv_driver);
+}
+module_exit(gpio_ir_recv_exit);
+
+MODULE_DESCRIPTION("GPIO IR Receiver driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/media/gpio-ir-recv.h b/include/media/gpio-ir-recv.h
new file mode 100644
index 0000000..3eab611
--- /dev/null
+++ b/include/media/gpio-ir-recv.h
@@ -0,0 +1,23 @@
+/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __GPIO_IR_RECV_H__
+#define __GPIO_IR_RECV_H__
+
+struct gpio_ir_recv_platform_data {
+ unsigned int gpio_nr;
+ bool active_low;
+ bool can_wakeup;
+};
+
+#endif /* __GPIO_IR_RECV_H__ */
+
--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
On Mon, Feb 20, 2012 at 03:17:52PM +0530, Ravi Kumar V wrote:
> Adds GPIO based IR Receiver driver. It decodes signals using decoders
> available in rc framework.
>
> Signed-off-by: Ravi Kumar V <[email protected]>
> ---
> drivers/media/rc/Kconfig | 9 ++
> drivers/media/rc/Makefile | 1 +
> drivers/media/rc/gpio-ir-recv.c | 189 +++++++++++++++++++++++++++++++++++++++
> include/media/gpio-ir-recv.h | 23 +++++
> 4 files changed, 222 insertions(+), 0 deletions(-)
> create mode 100644 drivers/media/rc/gpio-ir-recv.c
> create mode 100644 include/media/gpio-ir-recv.h
>
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index aeb7f43..6f63ded 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -256,4 +256,13 @@ config RC_LOOPBACK
> To compile this driver as a module, choose M here: the module will
> be called rc_loopback.
>
> +config IR_GPIO_CIR
> + tristate "GPIO IR remote control"
> + depends on RC_CORE
> + ---help---
> + Say Y if you want to use GPIO based IR Receiver.
> +
> + To compile this driver as a module, choose M here: the module will
> + be called gpio-ir-recv.
> +
> endif #RC_CORE
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index 2156e78..9b3568e 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -25,3 +25,4 @@ obj-$(CONFIG_IR_REDRAT3) += redrat3.o
> obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
> obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
> obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o
> +obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
> diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c
> new file mode 100644
> index 0000000..cf6e7f6
> --- /dev/null
> +++ b/drivers/media/rc/gpio-ir-recv.c
> @@ -0,0 +1,189 @@
> +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/irq.h>
> +#include <media/rc-core.h>
> +#include <media/gpio-ir-recv.h>
> +
> +#define GPIO_IR_DRIVER_NAME "gpio-rc-recv"
> +#define GPIO_IR_DEVICE_NAME "gpio_ir_recv"
> +
> +struct gpio_rc_dev {
> + struct rc_dev *rcdev;
> + struct mutex lock;
I could be completely wrong here, but is this lock necessary since data
is only read, and it's only used by a single interrupt handler?
> + unsigned int gpio_nr;
> + bool active_low;
> + bool can_wakeup;
> +};
> +
> +static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id)
> +{
> + struct gpio_rc_dev *gpio_dev = dev_id;
> + unsigned int gval;
> + int rc = 0;
> + enum raw_event_type type = IR_SPACE;
> +
> + mutex_lock(&gpio_dev->lock);
> + gval = gpio_get_value_cansleep(gpio_dev->gpio_nr);
> +
> + if (gval < 0)
> + goto err_get_value;
> +
> + if (gpio_dev->active_low)
> + gval = !gval;
> +
> + if (gval == 1)
> + type = IR_PULSE;
> +
> + rc = ir_raw_event_store_edge(gpio_dev->rcdev, type);
> + if (rc < 0)
> + goto err_get_value;
Since ir_raw_event_store_edge just puts the event into a kfifo for the
ir-raw thread to handle, does this really have to be a threaded IRQ? I'd
have thought you'd get more accurate time measurements (especially on
slower/embedded CPUs) if the IRQ is serviced as soon as possible.
If it needs to be threaded so that the gpio read can sleep, perhaps it
could make use of a hard irq if the gpio can be accessed atomically, and
fall back to threaded if not.
> +
> + ir_raw_event_handle(gpio_dev->rcdev);
> +
> +err_get_value:
> + mutex_unlock(&gpio_dev->lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int __devinit gpio_ir_recv_probe(struct platform_device *pdev)
> +{
> + struct gpio_rc_dev *gpio_dev;
> + struct rc_dev *rcdev;
> + const struct gpio_ir_recv_platform_data *pdata =
> + pdev->dev.platform_data;
> + int rc;
> +
> + if (!pdata)
> + return -EINVAL;
> +
> + if (pdata->gpio_nr < 0)
> + return -EINVAL;
> +
> + gpio_dev = kzalloc(sizeof(struct gpio_rc_dev), GFP_KERNEL);
> + if (!gpio_dev)
> + return -ENOMEM;
> +
> + mutex_init(&gpio_dev->lock);
> +
> + rcdev = rc_allocate_device();
> + if (!rcdev) {
> + rc = -ENOMEM;
> + goto err_allocate_device;
> + }
> +
> + rcdev->driver_type = RC_DRIVER_IR_RAW;
> + rcdev->allowed_protos = RC_TYPE_NEC;
Is this necessary, since the driver is protocol agnostic?
> + rcdev->input_name = GPIO_IR_DEVICE_NAME;
> + rcdev->input_id.bustype = BUS_HOST;
> + rcdev->driver_name = GPIO_IR_DRIVER_NAME;
> + rcdev->map_name = RC_MAP_EMPTY;
> +
> + gpio_dev->rcdev = rcdev;
> + gpio_dev->gpio_nr = pdata->gpio_nr;
> + gpio_dev->active_low = pdata->active_low;
> + gpio_dev->can_wakeup = pdata->can_wakeup;
> +
> +
> + rc = gpio_request(pdata->gpio_nr, "gpio-ir-recv");
> + if (rc < 0)
> + goto err_gpio_request;
> + rc = gpio_direction_input(pdata->gpio_nr);
> + if (rc < 0)
> + goto err_gpio_direction_input;
> +
> + rc = rc_register_device(rcdev);
> + if (rc < 0) {
> + dev_err(&pdev->dev, "failed to register rc device\n");
> + goto err_register_rc_device;
> + }
> +
> + platform_set_drvdata(pdev, gpio_dev);
> +
> + rc = request_threaded_irq(gpio_to_irq(pdata->gpio_nr),
> + NULL, gpio_ir_recv_irq,
> + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
> + "gpio-ir-recv-irq", gpio_dev);
> + if (rc < 0)
> + goto err_request_irq;
> +
> + if (pdata->can_wakeup == true) {
> + rc = enable_irq_wake(gpio_to_irq(pdata->gpio_nr));
> + if (rc < 0)
> + goto err_enable_irq_wake;
would this be better done in a suspend/resume callback, along with
device_may_wakeup and device_set_wakeup_capable/device_init_wakeup so
that it can be enabled and disabled with sysfs?
Cheers
James
> + }
> +
> + return 0;
> +
> +err_enable_irq_wake:
> + free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev);
> +err_request_irq:
> + platform_set_drvdata(pdev, NULL);
> + rc_unregister_device(rcdev);
> +err_register_rc_device:
> +err_gpio_direction_input:
> + gpio_free(pdata->gpio_nr);
> +err_gpio_request:
> + rc_free_device(rcdev);
> + rcdev = NULL;
> +err_allocate_device:
> + mutex_destroy(&gpio_dev->lock);
> + kfree(gpio_dev);
> + return rc;
> +}
> +
> +static int __devexit gpio_ir_recv_remove(struct platform_device *pdev)
> +{
> + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
> +
> + disable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr));
> + free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev);
> + platform_set_drvdata(pdev, NULL);
> + rc_unregister_device(gpio_dev->rcdev);
> + gpio_free(gpio_dev->gpio_nr);
> + rc_free_device(gpio_dev->rcdev);
> + mutex_destroy(&gpio_dev->lock);
> + kfree(gpio_dev);
> + return 0;
> +}
> +
> +static struct platform_driver gpio_ir_recv_driver = {
> + .probe = gpio_ir_recv_probe,
> + .remove = __devexit_p(gpio_ir_recv_remove),
> + .driver = {
> + .name = GPIO_IR_DRIVER_NAME,
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init gpio_ir_recv_init(void)
> +{
> + return platform_driver_register(&gpio_ir_recv_driver);
> +}
> +module_init(gpio_ir_recv_init);
> +
> +static void __exit gpio_ir_recv_exit(void)
> +{
> + platform_driver_unregister(&gpio_ir_recv_driver);
> +}
> +module_exit(gpio_ir_recv_exit);
> +
> +MODULE_DESCRIPTION("GPIO IR Receiver driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/media/gpio-ir-recv.h b/include/media/gpio-ir-recv.h
> new file mode 100644
> index 0000000..3eab611
> --- /dev/null
> +++ b/include/media/gpio-ir-recv.h
> @@ -0,0 +1,23 @@
> +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __GPIO_IR_RECV_H__
> +#define __GPIO_IR_RECV_H__
> +
> +struct gpio_ir_recv_platform_data {
> + unsigned int gpio_nr;
> + bool active_low;
> + bool can_wakeup;
> +};
> +
> +#endif /* __GPIO_IR_RECV_H__ */
> +
> --
> Sent by a consultant of the Qualcomm Innovation Center, Inc.
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
On 2/21/2012 1:59 AM, James Hogan wrote:
> On Mon, Feb 20, 2012 at 03:17:52PM +0530, Ravi Kumar V wrote:
>> Adds GPIO based IR Receiver driver. It decodes signals using decoders
>> available in rc framework.
>>
>> Signed-off-by: Ravi Kumar V<[email protected]>
>> ---
>> drivers/media/rc/Kconfig | 9 ++
>> drivers/media/rc/Makefile | 1 +
>> drivers/media/rc/gpio-ir-recv.c | 189 +++++++++++++++++++++++++++++++++++++++
>> include/media/gpio-ir-recv.h | 23 +++++
>> 4 files changed, 222 insertions(+), 0 deletions(-)
>> create mode 100644 drivers/media/rc/gpio-ir-recv.c
>> create mode 100644 include/media/gpio-ir-recv.h
>>
>> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
>> index aeb7f43..6f63ded 100644
>> --- a/drivers/media/rc/Kconfig
>> +++ b/drivers/media/rc/Kconfig
>> @@ -256,4 +256,13 @@ config RC_LOOPBACK
>> To compile this driver as a module, choose M here: the module will
>> be called rc_loopback.
>>
>> +config IR_GPIO_CIR
>> + tristate "GPIO IR remote control"
>> + depends on RC_CORE
>> + ---help---
>> + Say Y if you want to use GPIO based IR Receiver.
>> +
>> + To compile this driver as a module, choose M here: the module will
>> + be called gpio-ir-recv.
>> +
>> endif #RC_CORE
>> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
>> index 2156e78..9b3568e 100644
>> --- a/drivers/media/rc/Makefile
>> +++ b/drivers/media/rc/Makefile
>> @@ -25,3 +25,4 @@ obj-$(CONFIG_IR_REDRAT3) += redrat3.o
>> obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
>> obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
>> obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o
>> +obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
>> diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c
>> new file mode 100644
>> index 0000000..cf6e7f6
>> --- /dev/null
>> +++ b/drivers/media/rc/gpio-ir-recv.c
>> @@ -0,0 +1,189 @@
>> +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include<linux/kernel.h>
>> +#include<linux/init.h>
>> +#include<linux/module.h>
>> +#include<linux/interrupt.h>
>> +#include<linux/gpio.h>
>> +#include<linux/slab.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/irq.h>
>> +#include<media/rc-core.h>
>> +#include<media/gpio-ir-recv.h>
>> +
>> +#define GPIO_IR_DRIVER_NAME "gpio-rc-recv"
>> +#define GPIO_IR_DEVICE_NAME "gpio_ir_recv"
>> +
>> +struct gpio_rc_dev {
>> + struct rc_dev *rcdev;
>> + struct mutex lock;
>
> I could be completely wrong here, but is this lock necessary since data
> is only read, and it's only used by a single interrupt handler?
>
Yes i have checked you are right, i will take it out
>> + unsigned int gpio_nr;
>> + bool active_low;
>> + bool can_wakeup;
>> +};
>> +
>> +static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id)
>> +{
>> + struct gpio_rc_dev *gpio_dev = dev_id;
>> + unsigned int gval;
>> + int rc = 0;
>> + enum raw_event_type type = IR_SPACE;
>> +
>> + mutex_lock(&gpio_dev->lock);
>> + gval = gpio_get_value_cansleep(gpio_dev->gpio_nr);
>> +
>> + if (gval< 0)
>> + goto err_get_value;
>> +
>> + if (gpio_dev->active_low)
>> + gval = !gval;
>> +
>> + if (gval == 1)
>> + type = IR_PULSE;
>> +
>> + rc = ir_raw_event_store_edge(gpio_dev->rcdev, type);
>> + if (rc< 0)
>> + goto err_get_value;
>
> Since ir_raw_event_store_edge just puts the event into a kfifo for the
> ir-raw thread to handle, does this really have to be a threaded IRQ? I'd
> have thought you'd get more accurate time measurements (especially on
> slower/embedded CPUs) if the IRQ is serviced as soon as possible.
>
> If it needs to be threaded so that the gpio read can sleep, perhaps it
> could make use of a hard irq if the gpio can be accessed atomically, and
> fall back to threaded if not.
>
yes you are right i will see, I will distinguish between gpio atomic &
sleep by using gpio_cansleep in probe and switch to appropriate
hard/threaded irq.
>> +
>> + ir_raw_event_handle(gpio_dev->rcdev);
>> +
>> +err_get_value:
>> + mutex_unlock(&gpio_dev->lock);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int __devinit gpio_ir_recv_probe(struct platform_device *pdev)
>> +{
>> + struct gpio_rc_dev *gpio_dev;
>> + struct rc_dev *rcdev;
>> + const struct gpio_ir_recv_platform_data *pdata =
>> + pdev->dev.platform_data;
>> + int rc;
>> +
>> + if (!pdata)
>> + return -EINVAL;
>> +
>> + if (pdata->gpio_nr< 0)
>> + return -EINVAL;
>> +
>> + gpio_dev = kzalloc(sizeof(struct gpio_rc_dev), GFP_KERNEL);
>> + if (!gpio_dev)
>> + return -ENOMEM;
>> +
>> + mutex_init(&gpio_dev->lock);
>> +
>> + rcdev = rc_allocate_device();
>> + if (!rcdev) {
>> + rc = -ENOMEM;
>> + goto err_allocate_device;
>> + }
>> +
>> + rcdev->driver_type = RC_DRIVER_IR_RAW;
>> + rcdev->allowed_protos = RC_TYPE_NEC;
>
> Is this necessary, since the driver is protocol agnostic?
I will change it to RC_TYPE_ALL
>
>> + rcdev->input_name = GPIO_IR_DEVICE_NAME;
>> + rcdev->input_id.bustype = BUS_HOST;
>> + rcdev->driver_name = GPIO_IR_DRIVER_NAME;
>> + rcdev->map_name = RC_MAP_EMPTY;
>> +
>> + gpio_dev->rcdev = rcdev;
>> + gpio_dev->gpio_nr = pdata->gpio_nr;
>> + gpio_dev->active_low = pdata->active_low;
>> + gpio_dev->can_wakeup = pdata->can_wakeup;
>> +
>> +
>> + rc = gpio_request(pdata->gpio_nr, "gpio-ir-recv");
>> + if (rc< 0)
>> + goto err_gpio_request;
>> + rc = gpio_direction_input(pdata->gpio_nr);
>> + if (rc< 0)
>> + goto err_gpio_direction_input;
>> +
>> + rc = rc_register_device(rcdev);
>> + if (rc< 0) {
>> + dev_err(&pdev->dev, "failed to register rc device\n");
>> + goto err_register_rc_device;
>> + }
>> +
>> + platform_set_drvdata(pdev, gpio_dev);
>> +
>> + rc = request_threaded_irq(gpio_to_irq(pdata->gpio_nr),
>> + NULL, gpio_ir_recv_irq,
>> + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
>> + "gpio-ir-recv-irq", gpio_dev);
>> + if (rc< 0)
>> + goto err_request_irq;
>> +
>> + if (pdata->can_wakeup == true) {
>> + rc = enable_irq_wake(gpio_to_irq(pdata->gpio_nr));
>> + if (rc< 0)
>> + goto err_enable_irq_wake;
>
> would this be better done in a suspend/resume callback, along with
> device_may_wakeup and device_set_wakeup_capable/device_init_wakeup so
> that it can be enabled and disabled with sysfs?
>
Yes i will look into this
> Cheers
> James
>
>> + }
>> +
>> + return 0;
>> +
>> +err_enable_irq_wake:
>> + free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev);
>> +err_request_irq:
>> + platform_set_drvdata(pdev, NULL);
>> + rc_unregister_device(rcdev);
>> +err_register_rc_device:
>> +err_gpio_direction_input:
>> + gpio_free(pdata->gpio_nr);
>> +err_gpio_request:
>> + rc_free_device(rcdev);
>> + rcdev = NULL;
>> +err_allocate_device:
>> + mutex_destroy(&gpio_dev->lock);
>> + kfree(gpio_dev);
>> + return rc;
>> +}
>> +
>> +static int __devexit gpio_ir_recv_remove(struct platform_device *pdev)
>> +{
>> + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
>> +
>> + disable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr));
>> + free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev);
>> + platform_set_drvdata(pdev, NULL);
>> + rc_unregister_device(gpio_dev->rcdev);
>> + gpio_free(gpio_dev->gpio_nr);
>> + rc_free_device(gpio_dev->rcdev);
>> + mutex_destroy(&gpio_dev->lock);
>> + kfree(gpio_dev);
>> + return 0;
>> +}
>> +
>> +static struct platform_driver gpio_ir_recv_driver = {
>> + .probe = gpio_ir_recv_probe,
>> + .remove = __devexit_p(gpio_ir_recv_remove),
>> + .driver = {
>> + .name = GPIO_IR_DRIVER_NAME,
>> + .owner = THIS_MODULE,
>> + },
>> +};
>> +
>> +static int __init gpio_ir_recv_init(void)
>> +{
>> + return platform_driver_register(&gpio_ir_recv_driver);
>> +}
>> +module_init(gpio_ir_recv_init);
>> +
>> +static void __exit gpio_ir_recv_exit(void)
>> +{
>> + platform_driver_unregister(&gpio_ir_recv_driver);
>> +}
>> +module_exit(gpio_ir_recv_exit);
>> +
>> +MODULE_DESCRIPTION("GPIO IR Receiver driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/include/media/gpio-ir-recv.h b/include/media/gpio-ir-recv.h
>> new file mode 100644
>> index 0000000..3eab611
>> --- /dev/null
>> +++ b/include/media/gpio-ir-recv.h
>> @@ -0,0 +1,23 @@
>> +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef __GPIO_IR_RECV_H__
>> +#define __GPIO_IR_RECV_H__
>> +
>> +struct gpio_ir_recv_platform_data {
>> + unsigned int gpio_nr;
>> + bool active_low;
>> + bool can_wakeup;
>> +};
>> +
>> +#endif /* __GPIO_IR_RECV_H__ */
>> +
>> --
>> Sent by a consultant of the Qualcomm Innovation Center, Inc.
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to [email protected]
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
Thanks,
Ravi Kumar V
--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.