Create local variables for the channel, range, and aref in order
to make the remaining code a bit cleaner.
Remove the extra space in all the comments.
Remove the 'static const int timeout' and just use the open
coded value in the loop.
Signed-off-by: H Hartley Sweeten <[email protected]>
Cc: Ian Abbott <[email protected]>
Cc: Frank Mori Hess <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/cb_pcidas.c | 35 ++++++++++++++----------------
1 file changed, 16 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index b00ccad..1479325 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -382,36 +382,33 @@ static inline unsigned int cal_enable_bits(struct comedi_device *dev)
return CAL_EN_BIT | CAL_SRC_BITS(devpriv->calibration_source);
}
-/*
- * "instructions" read/write data in "one-shot" or "software-triggered"
- * mode.
- */
static int cb_pcidas_ai_rinsn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct cb_pcidas_private *devpriv = dev->private;
- int n, i;
+ unsigned int chan = CR_CHAN(insn->chanspec);
+ unsigned int range = CR_RANGE(insn->chanspec);
+ unsigned int aref = CR_AREF(insn->chanspec);
unsigned int bits;
- static const int timeout = 10000;
- int channel;
- /* enable calibration input if appropriate */
+ int n, i;
+
+ /* enable calibration input if appropriate */
if (insn->chanspec & CR_ALT_SOURCE) {
outw(cal_enable_bits(dev),
devpriv->control_status + CALIBRATION_REG);
- channel = 0;
+ chan = 0;
} else {
outw(0, devpriv->control_status + CALIBRATION_REG);
- channel = CR_CHAN(insn->chanspec);
}
- /* set mux limits and gain */
- bits = BEGIN_SCAN(channel) |
- END_SCAN(channel) | GAIN_BITS(CR_RANGE(insn->chanspec));
- /* set unipolar/bipolar */
- if (CR_RANGE(insn->chanspec) & IS_UNIPOLAR)
+
+ /* set mux limits and gain */
+ bits = BEGIN_SCAN(chan) | END_SCAN(chan) | GAIN_BITS(range);
+ /* set unipolar/bipolar */
+ if (range & IS_UNIPOLAR)
bits |= UNIP;
- /* set singleended/differential */
- if (CR_AREF(insn->chanspec) != AREF_DIFF)
+ /* set single-ended/differential */
+ if (aref != AREF_DIFF)
bits |= SE;
outw(bits, devpriv->control_status + ADCMUX_CONT);
@@ -425,11 +422,11 @@ static int cb_pcidas_ai_rinsn(struct comedi_device *dev,
/* wait for conversion to end */
/* return -ETIMEDOUT if there is a timeout */
- for (i = 0; i < timeout; i++) {
+ for (i = 0; i < 10000; i++) {
if (inw(devpriv->control_status + ADCMUX_CONT) & EOC)
break;
}
- if (i == timeout)
+ if (i == 10000)
return -ETIMEDOUT;
/* read data */
--
1.7.11