Remove the commented out pci device entries in the MODULE_DEVICE_TABLE
as well as the associated boardinfo, which is also commented out. Add
some whitespace to the boardinfo to improve readability.
This driver should also support the pci-6216 card which has an
additional 8 analog outputs (16 total). But the device id needs
to be determined.
Signed-off-by: H Hartley Sweeten <[email protected]>
Cc: Ian Abbott <[email protected]>
Cc: Frank Mori Hess <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/adl_pci6208.c | 22 ++++------------------
1 file changed, 4 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c
index 39bdf32..fe97db2 100644
--- a/drivers/staging/comedi/drivers/adl_pci6208.c
+++ b/drivers/staging/comedi/drivers/adl_pci6208.c
@@ -73,21 +73,11 @@ struct pci6208_board {
};
static const struct pci6208_board pci6208_boards[] = {
- /*{
- .name = "pci6208v",
- .dev_id = 0x6208, // not sure
- .ao_chans = 8
- },
- {
- .name = "pci6216v",
- .dev_id = 0x6208, // not sure
- .ao_chans = 16
- }, */
{
- .name = "pci6208a",
- .dev_id = 0x6208,
- .ao_chans = 8
- }
+ .name = "pci6208a",
+ .dev_id = 0x6208,
+ .ao_chans = 8,
+ },
};
struct pci6208_private {
@@ -307,11 +297,7 @@ static void __devexit adl_pci6208_pci_remove(struct pci_dev *dev)
comedi_pci_auto_unconfig(dev);
}
-/* This is used by modprobe to translate PCI IDs to drivers. Should
- * only be used for PCI and ISA-PnP devices */
static DEFINE_PCI_DEVICE_TABLE(adl_pci6208_pci_table) = {
- /* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
- /* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, 0x6208) },
{ 0 }
};
--
1.7.11