3.6-rc2 crashs often (not during the boot, but later when
using KDE and internet)
Then the keyboard is blinking, sometimes 2, sometimes 3
lamps (Caps Lock, Scroll lock, sometimes Num Lock too)
With 3.6-rc2 this didn't happen. The configuration stays
the same.
In the logfiles is nothing visible.
Ideas how to catch this ?
---
Professional hosting for everyone - http://www.host.ru
On Sun, 19 August 2012 "werner" <[email protected]> wrote:
> 3.6-rc2 crashs often (not during the boot, but later when
> using KDE and internet)
> Then the keyboard is blinking, sometimes 2, sometimes 3
> lamps (Caps Lock, Scroll lock, sometimes Num Lock too)
> With 3.6-rc2 this didn't happen. The configuration stays
Huh, above you just said 3.6-rc2 crashes...
> the same.
> In the logfiles is nothing visible.
> Ideas how to catch this ?
If you can hook a serial cable to your system and boot it with
console=/dev/ttyS0 console=tty0 (assuming you hook ttyS0, and adding
baud-rate as needed) you can grab possible kernel out this way.
Alternatively you can also use netconsole and capture output on
a second system on your network (e.g. with netcat).
See Documentation/kernel-parameters.txt and Kconfig help for
netconsole for details.
Bruno