The MXS driver tries to do the work of irq_domain_add_linear()
by reserving a bunch of descriptors somewhere and keeping track
of the base offset, then calling irq_domain_add_legacy(). Let's
stop doing that and simply use the linear IRQ domain.
Cc: Rob Herring <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: Shawn Guo <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
---
drivers/gpio/gpio-mxs.c | 19 ++++++-------------
1 file changed, 6 insertions(+), 13 deletions(-)
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index 796fb13..71fd5b1 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -223,7 +223,6 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev)
static void __iomem *base;
struct mxs_gpio_port *port;
struct resource *iores = NULL;
- int irq_base;
int err;
port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
@@ -272,16 +271,10 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev)
/* clear address has to be used to clear IRQSTAT bits */
writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
- irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
- if (irq_base < 0)
- return irq_base;
-
- port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
+ port->domain = irq_domain_add_linear(np, 32,
&irq_domain_simple_ops, NULL);
- if (!port->domain) {
- err = -ENODEV;
- goto out_irqdesc_free;
- }
+ if (!port->domain)
+ return -ENODEV;
/* gpio-mxs can be a generic irq chip */
mxs_gpio_init_gc(port, irq_base);
@@ -295,7 +288,7 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev)
port->base + PINCTRL_DOUT(port), NULL,
port->base + PINCTRL_DOE(port), NULL, 0);
if (err)
- goto out_irqdesc_free;
+ goto out_irqdomain_remove;
port->bgc.gc.to_irq = mxs_gpio_to_irq;
port->bgc.gc.base = port->id * 32;
@@ -308,8 +301,8 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev)
out_bgpio_remove:
bgpio_remove(&port->bgc);
-out_irqdesc_free:
- irq_free_descs(irq_base, 32);
+out_irqdomain_remove:
+ irq_domain_remove(port->domain);
return err;
}
--
1.7.11.7
On Tue, Oct 16, 2012 at 09:22:56PM +0200, Linus Walleij wrote:
> The MXS driver tries to do the work of irq_domain_add_linear()
> by reserving a bunch of descriptors somewhere and keeping track
> of the base offset, then calling irq_domain_add_legacy(). Let's
> stop doing that and simply use the linear IRQ domain.
>
> Cc: Rob Herring <[email protected]>
> Cc: Grant Likely <[email protected]>
> Cc: Shawn Guo <[email protected]>
> Signed-off-by: Linus Walleij <[email protected]>
> ---
> drivers/gpio/gpio-mxs.c | 19 ++++++-------------
> 1 file changed, 6 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
> index 796fb13..71fd5b1 100644
> --- a/drivers/gpio/gpio-mxs.c
> +++ b/drivers/gpio/gpio-mxs.c
> @@ -223,7 +223,6 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev)
> static void __iomem *base;
> struct mxs_gpio_port *port;
> struct resource *iores = NULL;
> - int irq_base;
...
> int err;
>
> port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
> @@ -272,16 +271,10 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev)
> /* clear address has to be used to clear IRQSTAT bits */
> writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
>
> - irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
> - if (irq_base < 0)
> - return irq_base;
> -
> - port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
> + port->domain = irq_domain_add_linear(np, 32,
> &irq_domain_simple_ops, NULL);
> - if (!port->domain) {
> - err = -ENODEV;
> - goto out_irqdesc_free;
> - }
> + if (!port->domain)
> + return -ENODEV;
>
> /* gpio-mxs can be a generic irq chip */
> mxs_gpio_init_gc(port, irq_base);
^^^^^^^^
So I know this one is not compile-tested.
This is exactly the reason why I have to use irq_domain_add_legacy
other than irq_domain_add_linear when I add irqdomain support for the
driver. The driver uses generic-irq infrastructural which needs
irq_base for setup. So sadly, before generic-irq gets improved, any
irq chip that uses generic-irq will have to use irq_domain_add_legacy.
Shawn
> @@ -295,7 +288,7 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev)
> port->base + PINCTRL_DOUT(port), NULL,
> port->base + PINCTRL_DOE(port), NULL, 0);
> if (err)
> - goto out_irqdesc_free;
> + goto out_irqdomain_remove;
>
> port->bgc.gc.to_irq = mxs_gpio_to_irq;
> port->bgc.gc.base = port->id * 32;
> @@ -308,8 +301,8 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev)
>
> out_bgpio_remove:
> bgpio_remove(&port->bgc);
> -out_irqdesc_free:
> - irq_free_descs(irq_base, 32);
> +out_irqdomain_remove:
> + irq_domain_remove(port->domain);
> return err;
> }
>
> --
> 1.7.11.7
>
On 10/18/2012 01:22 AM, Shawn Guo wrote:
> On Tue, Oct 16, 2012 at 09:22:56PM +0200, Linus Walleij wrote:
>> The MXS driver tries to do the work of irq_domain_add_linear()
>> by reserving a bunch of descriptors somewhere and keeping track
>> of the base offset, then calling irq_domain_add_legacy(). Let's
>> stop doing that and simply use the linear IRQ domain.
>>
>> Cc: Rob Herring <[email protected]>
>> Cc: Grant Likely <[email protected]>
>> Cc: Shawn Guo <[email protected]>
>> Signed-off-by: Linus Walleij <[email protected]>
>> ---
>> drivers/gpio/gpio-mxs.c | 19 ++++++-------------
>> 1 file changed, 6 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
>> index 796fb13..71fd5b1 100644
>> --- a/drivers/gpio/gpio-mxs.c
>> +++ b/drivers/gpio/gpio-mxs.c
>> @@ -223,7 +223,6 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev)
>> static void __iomem *base;
>> struct mxs_gpio_port *port;
>> struct resource *iores = NULL;
>> - int irq_base;
>
> ...
>
>> int err;
>>
>> port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
>> @@ -272,16 +271,10 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev)
>> /* clear address has to be used to clear IRQSTAT bits */
>> writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
>>
>> - irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
>> - if (irq_base < 0)
>> - return irq_base;
>> -
>> - port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
>> + port->domain = irq_domain_add_linear(np, 32,
>> &irq_domain_simple_ops, NULL);
>> - if (!port->domain) {
>> - err = -ENODEV;
>> - goto out_irqdesc_free;
>> - }
>> + if (!port->domain)
>> + return -ENODEV;
>>
>> /* gpio-mxs can be a generic irq chip */
>> mxs_gpio_init_gc(port, irq_base);
> ^^^^^^^^
>
> So I know this one is not compile-tested.
>
> This is exactly the reason why I have to use irq_domain_add_legacy
> other than irq_domain_add_linear when I add irqdomain support for the
> driver. The driver uses generic-irq infrastructural which needs
> irq_base for setup. So sadly, before generic-irq gets improved, any
> irq chip that uses generic-irq will have to use irq_domain_add_legacy.
We should get someone to work on that. ;)
I think I need to go back and just fix this aspect rather than try and
integrate irqdomains into generic-irqchip.
Rob
On Thu, Oct 18, 2012 at 8:22 AM, Shawn Guo <[email protected]> wrote:
>> /* gpio-mxs can be a generic irq chip */
>> mxs_gpio_init_gc(port, irq_base);
> ^^^^^^^^
>
> So I know this one is not compile-tested.
No, which defconfig shall I use for this driver?
> This is exactly the reason why I have to use irq_domain_add_legacy
> other than irq_domain_add_linear when I add irqdomain support for the
> driver. The driver uses generic-irq infrastructural which needs
> irq_base for setup. So sadly, before generic-irq gets improved, any
> irq chip that uses generic-irq will have to use irq_domain_add_legacy.
Bah, I'm dropping this and a lot of the other patches as well.
I obviously do not understand the inner transcendental meaning of
irqdomains yet.
Yours,
Linus Walleij
On 19 October 2012 18:22, Linus Walleij <[email protected]> wrote:
> No, which defconfig shall I use for this driver?
>
mxs_defconfig
Shawn