AS3711 is a PMIC with multiple DCDC and LDO power supplies, GPIOs, an RTC,
a battery charger and a general purpose ADC. This patch adds support for
the MFD with support for a regulator driver and a backlight driver.
Signed-off-by: Guennadi Liakhovetski <[email protected]>
---
v2: (Thanks to Mark for review)
- Only print chip IDs if they match expected values
- Check regmap_read() error
- Make platform data optional
drivers/mfd/Kconfig | 9 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/as3711.c | 217 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/as3711.h | 126 +++++++++++++++++++++++++
4 files changed, 353 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/as3711.c
create mode 100644 include/linux/mfd/as3711.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index acab3ef..77360f9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1044,6 +1044,15 @@ config MFD_PALMAS
If you say yes here you get support for the Palmas
series of PMIC chips from Texas Instruments.
+config MFD_AS3711
+ bool "Support for AS3711"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C=y
+ help
+ Support for the AS3711 PMIC from AMS
+
endmenu
endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index d8ccb63..f84d012 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -138,3 +138,4 @@ obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
obj-$(CONFIG_MFD_SYSCON) += syscon.o
obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
+obj-$(CONFIG_MFD_AS3711) += as3711.o
diff --git a/drivers/mfd/as3711.c b/drivers/mfd/as3711.c
new file mode 100644
index 0000000..e994c96
--- /dev/null
+++ b/drivers/mfd/as3711.c
@@ -0,0 +1,217 @@
+/*
+ * AS3711 PMIC MFC driver
+ *
+ * Copyright (C) 2012 Renesas Electronics Corporation
+ * Author: Guennadi Liakhovetski, <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License as
+ * published by the Free Software Foundation
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/as3711.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+enum {
+ AS3711_REGULATOR,
+ AS3711_BACKLIGHT,
+};
+
+/*
+ * Ok to have it static: it is only used during probing and multiple I2C devices
+ * cannot be probed simultaneously. Just make sure to avoid stale data.
+ */
+static struct mfd_cell as3711_subdevs[] = {
+ [AS3711_REGULATOR] = {.name = "as3711-regulator",},
+ [AS3711_BACKLIGHT] = {.name = "as3711-backlight",},
+};
+
+static bool as3711_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case AS3711_GPIO_SIGNAL_IN:
+ case AS3711_INTERRUPT_STATUS_1:
+ case AS3711_INTERRUPT_STATUS_2:
+ case AS3711_INTERRUPT_STATUS_3:
+ case AS3711_CHARGER_STATUS_1:
+ case AS3711_CHARGER_STATUS_2:
+ case AS3711_REG_STATUS:
+ return true;
+ }
+ return false;
+}
+
+static bool as3711_precious_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case AS3711_INTERRUPT_STATUS_1:
+ case AS3711_INTERRUPT_STATUS_2:
+ case AS3711_INTERRUPT_STATUS_3:
+ return true;
+ }
+ return false;
+}
+
+static bool as3711_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case AS3711_SD_1_VOLTAGE:
+ case AS3711_SD_2_VOLTAGE:
+ case AS3711_SD_3_VOLTAGE:
+ case AS3711_SD_4_VOLTAGE:
+ case AS3711_LDO_1_VOLTAGE:
+ case AS3711_LDO_2_VOLTAGE:
+ case AS3711_LDO_3_VOLTAGE:
+ case AS3711_LDO_4_VOLTAGE:
+ case AS3711_LDO_5_VOLTAGE:
+ case AS3711_LDO_6_VOLTAGE:
+ case AS3711_LDO_7_VOLTAGE:
+ case AS3711_LDO_8_VOLTAGE:
+ case AS3711_SD_CONTROL:
+ case AS3711_GPIO_SIGNAL_OUT:
+ case AS3711_GPIO_SIGNAL_IN:
+ case AS3711_SD_CONTROL_1:
+ case AS3711_SD_CONTROL_2:
+ case AS3711_CURR_CONTROL:
+ case AS3711_CURR1_VALUE:
+ case AS3711_CURR2_VALUE:
+ case AS3711_CURR3_VALUE:
+ case AS3711_STEPUP_CONTROL_1:
+ case AS3711_STEPUP_CONTROL_2:
+ case AS3711_STEPUP_CONTROL_4:
+ case AS3711_STEPUP_CONTROL_5:
+ case AS3711_REG_STATUS:
+ case AS3711_INTERRUPT_STATUS_1:
+ case AS3711_INTERRUPT_STATUS_2:
+ case AS3711_INTERRUPT_STATUS_3:
+ case AS3711_CHARGER_STATUS_1:
+ case AS3711_CHARGER_STATUS_2:
+ case AS3711_ASIC_ID_1:
+ case AS3711_ASIC_ID_2:
+ return true;
+ }
+ return false;
+}
+
+static const struct regmap_config as3711_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .volatile_reg = as3711_volatile_reg,
+ .readable_reg = as3711_readable_reg,
+ .precious_reg = as3711_precious_reg,
+ .max_register = AS3711_MAX_REGS,
+ .num_reg_defaults_raw = AS3711_MAX_REGS,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int as3711_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct as3711 *as3711;
+ struct as3711_platform_data *pdata = client->dev.platform_data;
+ unsigned int id1, id2;
+ int ret;
+
+ if (!pdata)
+ dev_dbg(&client->dev, "Platform data not found\n");
+
+ as3711 = devm_kzalloc(&client->dev, sizeof(struct as3711), GFP_KERNEL);
+ if (!as3711) {
+ dev_err(&client->dev, "Memory allocation failed\n");
+ return -ENOMEM;
+ }
+
+ as3711->dev = &client->dev;
+ i2c_set_clientdata(client, as3711);
+
+ if (client->irq)
+ dev_notice(&client->dev, "IRQ not supported yet\n");
+
+ as3711->regmap = devm_regmap_init_i2c(client, &as3711_regmap_config);
+ if (IS_ERR(as3711->regmap)) {
+ ret = PTR_ERR(as3711->regmap);
+ dev_err(&client->dev, "regmap initialization failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_read(as3711->regmap, AS3711_ASIC_ID_1, &id1);
+ if (!ret)
+ ret = regmap_read(as3711->regmap, AS3711_ASIC_ID_2, &id2);
+ if (ret < 0) {
+ dev_err(&client->dev, "regmap_read() failed: %d\n", ret);
+ return ret;
+ }
+ if (id1 != 0x8b)
+ return -ENODEV;
+ dev_info(as3711->dev, "AS3711 detected: %x:%x\n", id1, id2);
+
+ /* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */
+ if (pdata) {
+ as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator;
+ as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator);
+ as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight;
+ as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight);
+ } else {
+ as3711_subdevs[AS3711_REGULATOR].platform_data = NULL;
+ as3711_subdevs[AS3711_REGULATOR].pdata_size = 0;
+ as3711_subdevs[AS3711_BACKLIGHT].platform_data = NULL;
+ as3711_subdevs[AS3711_BACKLIGHT].pdata_size = 0;
+ }
+
+ ret = mfd_add_devices(as3711->dev, -1, as3711_subdevs,
+ ARRAY_SIZE(as3711_subdevs), NULL, 0, NULL);
+ if (ret < 0)
+ dev_err(&client->dev, "add mfd devices failed: %d\n", ret);
+
+ return ret;
+}
+
+static int as3711_i2c_remove(struct i2c_client *client)
+{
+ struct as3711 *as3711 = i2c_get_clientdata(client);
+
+ mfd_remove_devices(as3711->dev);
+ return 0;
+}
+
+static const struct i2c_device_id as3711_i2c_id[] = {
+ {.name = "as3711", .driver_data = 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, as3711_i2c_id);
+
+static struct i2c_driver as3711_i2c_driver = {
+ .driver = {
+ .name = "as3711",
+ .owner = THIS_MODULE,
+ },
+ .probe = as3711_i2c_probe,
+ .remove = as3711_i2c_remove,
+ .id_table = as3711_i2c_id,
+};
+
+static int __init as3711_i2c_init(void)
+{
+ return i2c_add_driver(&as3711_i2c_driver);
+}
+/* Initialise early */
+subsys_initcall(as3711_i2c_init);
+
+static void __exit as3711_i2c_exit(void)
+{
+ i2c_del_driver(&as3711_i2c_driver);
+}
+module_exit(as3711_i2c_exit);
+
+MODULE_AUTHOR("Guennadi Liakhovetski <[email protected]>");
+MODULE_DESCRIPTION("AS3711 PMIC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/as3711.h b/include/linux/mfd/as3711.h
new file mode 100644
index 0000000..38452ce
--- /dev/null
+++ b/include/linux/mfd/as3711.h
@@ -0,0 +1,126 @@
+/*
+ * AS3711 PMIC MFC driver header
+ *
+ * Copyright (C) 2012 Renesas Electronics Corporation
+ * Author: Guennadi Liakhovetski, <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License as
+ * published by the Free Software Foundation
+ */
+
+#ifndef MFD_AS3711_H
+#define MFD_AS3711_H
+
+/*
+ * Client data
+ */
+
+/* Register addresses */
+#define AS3711_SD_1_VOLTAGE 0 /* Digital Step-Down */
+#define AS3711_SD_2_VOLTAGE 1
+#define AS3711_SD_3_VOLTAGE 2
+#define AS3711_SD_4_VOLTAGE 3
+#define AS3711_LDO_1_VOLTAGE 4 /* Analog LDO */
+#define AS3711_LDO_2_VOLTAGE 5
+#define AS3711_LDO_3_VOLTAGE 6 /* Digital LDO */
+#define AS3711_LDO_4_VOLTAGE 7
+#define AS3711_LDO_5_VOLTAGE 8
+#define AS3711_LDO_6_VOLTAGE 9
+#define AS3711_LDO_7_VOLTAGE 0xa
+#define AS3711_LDO_8_VOLTAGE 0xb
+#define AS3711_SD_CONTROL 0x10
+#define AS3711_GPIO_SIGNAL_OUT 0x20
+#define AS3711_GPIO_SIGNAL_IN 0x21
+#define AS3711_SD_CONTROL_1 0x30
+#define AS3711_SD_CONTROL_2 0x31
+#define AS3711_CURR_CONTROL 0x40
+#define AS3711_CURR1_VALUE 0x43
+#define AS3711_CURR2_VALUE 0x44
+#define AS3711_CURR3_VALUE 0x45
+#define AS3711_STEPUP_CONTROL_1 0x50
+#define AS3711_STEPUP_CONTROL_2 0x51
+#define AS3711_STEPUP_CONTROL_4 0x53
+#define AS3711_STEPUP_CONTROL_5 0x54
+#define AS3711_REG_STATUS 0x73
+#define AS3711_INTERRUPT_STATUS_1 0x77
+#define AS3711_INTERRUPT_STATUS_2 0x78
+#define AS3711_INTERRUPT_STATUS_3 0x79
+#define AS3711_CHARGER_STATUS_1 0x86
+#define AS3711_CHARGER_STATUS_2 0x87
+#define AS3711_ASIC_ID_1 0x90
+#define AS3711_ASIC_ID_2 0x91
+
+#define AS3711_MAX_REGS 0x92
+
+/* Regulators */
+enum {
+ AS3711_REGULATOR_SD_1,
+ AS3711_REGULATOR_SD_2,
+ AS3711_REGULATOR_SD_3,
+ AS3711_REGULATOR_SD_4,
+ AS3711_REGULATOR_LDO_1,
+ AS3711_REGULATOR_LDO_2,
+ AS3711_REGULATOR_LDO_3,
+ AS3711_REGULATOR_LDO_4,
+ AS3711_REGULATOR_LDO_5,
+ AS3711_REGULATOR_LDO_6,
+ AS3711_REGULATOR_LDO_7,
+ AS3711_REGULATOR_LDO_8,
+
+ AS3711_REGULATOR_MAX,
+};
+
+struct device;
+struct regmap;
+
+struct as3711 {
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+#define AS3711_MAX_STEPDOWN 4
+#define AS3711_MAX_STEPUP 2
+#define AS3711_MAX_LDO 8
+
+enum as3711_su2_feedback {
+ AS3711_SU2_VOLTAGE,
+ AS3711_SU2_CURR1,
+ AS3711_SU2_CURR2,
+ AS3711_SU2_CURR3,
+ AS3711_SU2_CURR_AUTO,
+};
+
+enum as3711_su2_fbprot {
+ AS3711_SU2_LX_SD4,
+ AS3711_SU2_GPIO2,
+ AS3711_SU2_GPIO3,
+ AS3711_SU2_GPIO4,
+};
+
+/*
+ * Platform data
+ */
+
+struct as3711_regulator_pdata {
+ struct regulator_init_data *init_data[AS3711_REGULATOR_MAX];
+};
+
+struct as3711_bl_pdata {
+ const char *su1_fb;
+ int su1_max_uA;
+ const char *su2_fb;
+ int su2_max_uA;
+ enum as3711_su2_feedback su2_feedback;
+ enum as3711_su2_fbprot su2_fbprot;
+ bool su2_auto_curr1;
+ bool su2_auto_curr2;
+ bool su2_auto_curr3;
+};
+
+struct as3711_platform_data {
+ struct as3711_regulator_pdata regulator;
+ struct as3711_bl_pdata backlight;
+};
+
+#endif
--
1.7.2.5
This driver supports the 4 DCDC and 8 LDO regulators on the AS3711 PMIC.
Signed-off-by: Guennadi Liakhovetski <[email protected]>
---
v2: make platform data optional
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1 +
drivers/regulator/as3711-regulator.c | 379 ++++++++++++++++++++++++++++++++++
3 files changed, 387 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/as3711-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 67d47b59..f73d6f5 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -450,5 +450,12 @@ config REGULATOR_WM8994
This driver provides support for the voltage regulators on the
WM8994 CODEC.
+config REGULATOR_AS3711
+ tristate "AS3711 PMIC"
+ depends on MFD_AS3711
+ help
+ This driver provides support for the voltage regulators on the
+ AS3711 PMIC
+
endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index e431eed..c1557ac 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
+obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
diff --git a/drivers/regulator/as3711-regulator.c b/drivers/regulator/as3711-regulator.c
new file mode 100644
index 0000000..81578bf
--- /dev/null
+++ b/drivers/regulator/as3711-regulator.c
@@ -0,0 +1,379 @@
+/*
+ * AS3711 PMIC regulator driver, using DCDC Step Down and LDO supplies
+ *
+ * Copyright (C) 2012 Renesas Electronics Corporation
+ * Author: Guennadi Liakhovetski, <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License as
+ * published by the Free Software Foundation
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/mfd/as3711.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/slab.h>
+
+struct as3711_regulator_info {
+ struct regulator_desc desc;
+ unsigned int max_uV;
+};
+
+struct as3711_regulator {
+ struct as3711_regulator_info *reg_info;
+ struct regulator_dev *rdev;
+};
+
+static int as3711_list_voltage_sd(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ if (selector >= rdev->desc->n_voltages)
+ return -EINVAL;
+
+ if (!selector)
+ return 0;
+ if (selector < 0x41)
+ return 600000 + selector * 12500;
+ if (selector < 0x71)
+ return 1400000 + (selector - 0x40) * 25000;
+ return 2600000 + (selector - 0x70) * 50000;
+}
+
+static int as3711_list_voltage_aldo(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ if (selector >= rdev->desc->n_voltages)
+ return -EINVAL;
+
+ if (selector < 0x10)
+ return 1200000 + selector * 50000;
+ return 1800000 + (selector - 0x10) * 100000;
+}
+
+static int as3711_list_voltage_dldo(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ if (selector >= rdev->desc->n_voltages ||
+ (selector > 0x10 && selector < 0x20))
+ return -EINVAL;
+
+ if (selector < 0x11)
+ return 900000 + selector * 50000;
+ return 1750000 + (selector - 0x20) * 50000;
+}
+
+static int as3711_bound_check(struct regulator_dev *rdev,
+ int *min_uV, int *max_uV)
+{
+ struct as3711_regulator_info *info = container_of(rdev->desc,
+ struct as3711_regulator_info, desc);
+ struct as3711_regulator *reg = rdev->reg_data;
+
+ WARN_ON(reg->reg_info != info);
+
+ dev_dbg(&rdev->dev, "%s(), %d, %d, %d\n", __func__,
+ *min_uV, rdev->desc->min_uV, info->max_uV);
+
+ if (*max_uV < *min_uV ||
+ *min_uV >= info->max_uV || rdev->desc->min_uV >= *max_uV)
+ return -EINVAL;
+
+ if (rdev->desc->n_voltages == 1)
+ return 0;
+
+ if (*max_uV > info->max_uV)
+ *max_uV = info->max_uV;
+
+ if (*min_uV < rdev->desc->min_uV)
+ *min_uV = rdev->desc->min_uV;
+
+ return *min_uV;
+}
+
+static int as3711_sel_check(int min, int max, int bottom, int step)
+{
+ int ret, voltage;
+
+ /* Round up min, when dividing: keeps us within the range */
+ ret = (min - bottom + step - 1) / step;
+ voltage = ret * step + bottom;
+ pr_debug("%s(): select %d..%d in %d+N*%d: %d\n", __func__,
+ min, max, bottom, step, ret);
+ if (voltage > max) {
+ /*
+ * Try 1 down. It will take us below min, but as long we stay
+ * above bottom, we're fine.
+ */
+ ret--;
+ voltage = ret * step + bottom;
+ if (voltage < bottom)
+ return -EINVAL;
+ }
+ return ret;
+}
+
+static int as3711_map_voltage_sd(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ int ret;
+
+ ret = as3711_bound_check(rdev, &min_uV, &max_uV);
+ if (ret <= 0)
+ return ret;
+
+ if (min_uV <= 1400000)
+ return as3711_sel_check(min_uV, max_uV, 600000, 12500);
+
+ if (min_uV <= 2600000)
+ return as3711_sel_check(min_uV, max_uV, 1400000, 25000) + 0x40;
+
+ return as3711_sel_check(min_uV, max_uV, 2600000, 50000) + 0x70;
+}
+
+/*
+ * The regulator API supports 4 modes of operataion: FAST, NORMAL, IDLE and
+ * STANDBY. We map them in the following way to AS3711 SD1-4 DCDC modes:
+ * FAST: sdX_fast=1
+ * NORMAL: low_noise=1
+ * IDLE: low_noise=0
+ */
+
+static int as3711_set_mode_sd(struct regulator_dev *rdev, unsigned int mode)
+{
+ unsigned int fast_bit = rdev->desc->enable_mask,
+ low_noise_bit = fast_bit << 4;
+ u8 val;
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ val = fast_bit | low_noise_bit;
+ break;
+ case REGULATOR_MODE_NORMAL:
+ val = low_noise_bit;
+ break;
+ case REGULATOR_MODE_IDLE:
+ val = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(rdev->regmap, AS3711_SD_CONTROL_1,
+ low_noise_bit | fast_bit, val);
+}
+
+static unsigned int as3711_get_mode_sd(struct regulator_dev *rdev)
+{
+ unsigned int fast_bit = rdev->desc->enable_mask,
+ low_noise_bit = fast_bit << 4, mask = fast_bit | low_noise_bit;
+ unsigned int val;
+ int ret = regmap_read(rdev->regmap, AS3711_SD_CONTROL_1, &val);
+
+ if (ret < 0)
+ return ret;
+
+ if ((val & mask) == mask)
+ return REGULATOR_MODE_FAST;
+
+ if ((val & mask) == low_noise_bit)
+ return REGULATOR_MODE_NORMAL;
+
+ if (!(val & mask))
+ return REGULATOR_MODE_IDLE;
+
+ return -EINVAL;
+}
+
+static int as3711_map_voltage_aldo(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ int ret;
+
+ ret = as3711_bound_check(rdev, &min_uV, &max_uV);
+ if (ret <= 0)
+ return ret;
+
+ if (min_uV <= 1800000)
+ return as3711_sel_check(min_uV, max_uV, 1200000, 50000);
+
+ return as3711_sel_check(min_uV, max_uV, 1800000, 100000) + 0x10;
+}
+
+static int as3711_map_voltage_dldo(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ int ret;
+
+ ret = as3711_bound_check(rdev, &min_uV, &max_uV);
+ if (ret <= 0)
+ return ret;
+
+ if (min_uV <= 1700000)
+ return as3711_sel_check(min_uV, max_uV, 900000, 50000);
+
+ return as3711_sel_check(min_uV, max_uV, 1750000, 50000) + 0x20;
+}
+
+static struct regulator_ops as3711_sd_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = as3711_list_voltage_sd,
+ .map_voltage = as3711_map_voltage_sd,
+ .get_mode = as3711_get_mode_sd,
+ .set_mode = as3711_set_mode_sd,
+};
+
+static struct regulator_ops as3711_aldo_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = as3711_list_voltage_aldo,
+ .map_voltage = as3711_map_voltage_aldo,
+};
+
+static struct regulator_ops as3711_dldo_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = as3711_list_voltage_dldo,
+ .map_voltage = as3711_map_voltage_dldo,
+};
+
+#define AS3711_REG(_id, _en_reg, _en_bit, _vmask, _vshift, _min_uV, _max_uV, _sfx) \
+ [AS3711_REGULATOR_ ## _id] = { \
+ .desc = { \
+ .name = "as3711-regulator-" # _id, \
+ .id = AS3711_REGULATOR_ ## _id, \
+ .n_voltages = (_vmask + 1), \
+ .ops = &as3711_ ## _sfx ## _ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .vsel_reg = AS3711_ ## _id ## _VOLTAGE, \
+ .vsel_mask = _vmask << _vshift, \
+ .enable_reg = AS3711_ ## _en_reg, \
+ .enable_mask = BIT(_en_bit), \
+ .min_uV = _min_uV, \
+ }, \
+ .max_uV = _max_uV, \
+}
+
+static struct as3711_regulator_info as3711_reg_info[] = {
+ AS3711_REG(SD_1, SD_CONTROL, 0, 0x7f, 0, 612500, 3350000, sd),
+ AS3711_REG(SD_2, SD_CONTROL, 1, 0x7f, 0, 612500, 3350000, sd),
+ AS3711_REG(SD_3, SD_CONTROL, 2, 0x7f, 0, 612500, 3350000, sd),
+ AS3711_REG(SD_4, SD_CONTROL, 3, 0x7f, 0, 612500, 3350000, sd),
+ AS3711_REG(LDO_1, LDO_1_VOLTAGE, 7, 0x1f, 0, 1200000, 3300000, aldo),
+ AS3711_REG(LDO_2, LDO_2_VOLTAGE, 7, 0x1f, 0, 1200000, 3300000, aldo),
+ AS3711_REG(LDO_3, LDO_3_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
+ AS3711_REG(LDO_4, LDO_4_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
+ AS3711_REG(LDO_5, LDO_5_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
+ AS3711_REG(LDO_6, LDO_6_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
+ AS3711_REG(LDO_7, LDO_7_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
+ AS3711_REG(LDO_8, LDO_8_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
+ /* StepUp output voltage depends on supplying regulator */
+};
+
+#define AS3711_REGULATOR_NUM ARRAY_SIZE(as3711_reg_info)
+
+static int as3711_regulator_probe(struct platform_device *pdev)
+{
+ struct as3711_regulator_pdata *pdata = dev_get_platdata(&pdev->dev);
+ struct as3711 *as3711 = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_init_data *reg_data;
+ struct regulator_config config = {.dev = &pdev->dev,};
+ struct as3711_regulator *reg = NULL;
+ struct as3711_regulator *regs;
+ struct regulator_dev *rdev;
+ struct as3711_regulator_info *ri;
+ int ret;
+ int id;
+
+ if (!pdata)
+ dev_dbg(&pdev->dev, "No platform data...\n");
+
+ regs = devm_kzalloc(&pdev->dev, AS3711_REGULATOR_NUM *
+ sizeof(struct as3711_regulator), GFP_KERNEL);
+ if (!regs) {
+ dev_err(&pdev->dev, "Memory allocation failed exiting..\n");
+ return -ENOMEM;
+ }
+
+ for (id = 0, ri = as3711_reg_info; id < AS3711_REGULATOR_NUM; ++id, ri++) {
+ reg_data = pdata ? pdata->init_data[id] : NULL;
+
+ /* No need to register if there is no regulator data */
+ if (!ri->desc.name)
+ continue;
+
+ reg = ®s[id];
+ reg->reg_info = ri;
+
+ config.init_data = reg_data;
+ config.driver_data = reg;
+ config.regmap = as3711->regmap;
+
+ rdev = regulator_register(&ri->desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "Failed to register regulator %s\n",
+ ri->desc.name);
+ ret = PTR_ERR(rdev);
+ goto eregreg;
+ }
+ reg->rdev = rdev;
+ }
+ platform_set_drvdata(pdev, regs);
+ return 0;
+
+eregreg:
+ while (--id >= 0)
+ regulator_unregister(regs[id].rdev);
+
+ return ret;
+}
+
+static int as3711_regulator_remove(struct platform_device *pdev)
+{
+ struct as3711_regulator *regs = platform_get_drvdata(pdev);
+ int id;
+
+ for (id = 0; id < AS3711_REGULATOR_NUM; ++id)
+ regulator_unregister(regs[id].rdev);
+ return 0;
+}
+
+static struct platform_driver as3711_regulator_driver = {
+ .driver = {
+ .name = "as3711-regulator",
+ .owner = THIS_MODULE,
+ },
+ .probe = as3711_regulator_probe,
+ .remove = as3711_regulator_remove,
+};
+
+static int __init as3711_regulator_init(void)
+{
+ return platform_driver_register(&as3711_regulator_driver);
+}
+subsys_initcall(as3711_regulator_init);
+
+static void __exit as3711_regulator_exit(void)
+{
+ platform_driver_unregister(&as3711_regulator_driver);
+}
+module_exit(as3711_regulator_exit);
+
+MODULE_AUTHOR("Guennadi Liakhovetski <[email protected]>");
+MODULE_DESCRIPTION("AS3711 regulator driver");
+MODULE_ALIAS("platform:as3711-regulator");
+MODULE_LICENSE("GPL v2");
--
1.7.2.5
Hi Guennadi,
On Thu, Nov 22, 2012 at 11:12:04AM +0100, Guennadi Liakhovetski wrote:
> AS3711 is a PMIC with multiple DCDC and LDO power supplies, GPIOs, an RTC,
> a battery charger and a general purpose ADC. This patch adds support for
> the MFD with support for a regulator driver and a backlight driver.
>
> Signed-off-by: Guennadi Liakhovetski <[email protected]>
> ---
>
> v2: (Thanks to Mark for review)
>
> - Only print chip IDs if they match expected values
> - Check regmap_read() error
> - Make platform data optional
>
> drivers/mfd/Kconfig | 9 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/as3711.c | 217 ++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/as3711.h | 126 +++++++++++++++++++++++++
> 4 files changed, 353 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mfd/as3711.c
> create mode 100644 include/linux/mfd/as3711.h
Patch applied to my for-next branch, thanks.
Cheers,
Samuel.
--
Intel Open Source Technology Centre
http://oss.intel.com/
Hi Guennadi, Mark,
On Thu, Nov 22, 2012 at 11:12:08AM +0100, Guennadi Liakhovetski wrote:
> This driver supports the 4 DCDC and 8 LDO regulators on the AS3711 PMIC.
>
> Signed-off-by: Guennadi Liakhovetski <[email protected]>
> ---
>
> v2: make platform data optional
>
> drivers/regulator/Kconfig | 7 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/as3711-regulator.c | 379 ++++++++++++++++++++++++++++++++++
> 3 files changed, 387 insertions(+), 0 deletions(-)
> create mode 100644 drivers/regulator/as3711-regulator.c
Mark, does that look ok with you ? There's a build dependency with patch #1,
so it would make sense for me to take it.
Cheers,
Samuel.
--
Intel Open Source Technology Centre
http://oss.intel.com/
On Fri, Nov 23, 2012 at 12:15:15PM +0100, Samuel Ortiz wrote:
> Mark, does that look ok with you ? There's a build dependency with patch #1,
> so it would make sense for me to take it.
If there's a build dependency there's a problem - the Kconfig should
prevent the driver being selected without the MFD.
On Fri, 23 Nov 2012, Mark Brown wrote:
> On Fri, Nov 23, 2012 at 12:15:15PM +0100, Samuel Ortiz wrote:
>
> > Mark, does that look ok with you ? There's a build dependency with patch #1,
> > so it would make sense for me to take it.
>
> If there's a build dependency there's a problem - the Kconfig should
> prevent the driver being selected without the MFD.
Indeed there is one:
+config REGULATOR_AS3711
+ tristate "AS3711 PMIC"
+ depends on MFD_AS3711
So, should be ok
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
On Thu, Nov 22, 2012 at 11:12:08AM +0100, Guennadi Liakhovetski wrote:
> This driver supports the 4 DCDC and 8 LDO regulators on the AS3711 PMIC.
Applied, thanks.
On Fri, Nov 23, 2012 at 08:49:16PM +0900, Mark Brown wrote:
> On Fri, Nov 23, 2012 at 12:15:15PM +0100, Samuel Ortiz wrote:
>
> > Mark, does that look ok with you ? There's a build dependency with patch #1,
> > so it would make sense for me to take it.
>
> If there's a build dependency there's a problem - the Kconfig should
> prevent the driver being selected without the MFD.
It indeed does, sorry for the noise.
Cheers,
Samuel.
--
Intel Open Source Technology Centre
http://oss.intel.com/