On Sat, Feb 09, 2013 at 09:35:53PM +0530, Sekhar Nori wrote:
> Hi Matt,
>
> This version introduces build/bisect issues.
Ok, see later comment which addresses this...
> On 2/1/2013 11:52 PM, Matt Porter wrote:
> > Move mach-davinci/dma.c to common/edma.c so it can be used
> > by OMAP (specifically AM33xx) as well.
> >
> > Signed-off-by: Matt Porter <[email protected]>
> > Acked-by: Sekhar Nori <[email protected]>
>
> > diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/common/edma.c
>
> > @@ -25,7 +25,7 @@
> > #include <linux/io.h>
> > #include <linux/slab.h>
> >
> > -#include <mach/edma.h>
> > +#include <linux/platform_data/edma.h>
>
> > /*-----------------------------------------------------------------------*/
> > +static int edma_of_read_u32_to_s8_array(const struct device_node *np,
> > + const char *propname, s8 *out_values,
> > + size_t sz)
> > +{
> > + int ret;
> > +
> > + ret = of_property_read_u8_array(np, propname, out_values, sz);
>
> This needs <linux/of.h> to be included in this file.
>
> > +static int edma_xbar_event_map(struct device *dev,
> > + struct device_node *node,
> > + struct edma_soc_info *pdata, int len)
> > +{
> > + int ret = 0;
> > + int i;
> > + struct resource res;
> > + void *xbar;
> > + const s16 (*xbar_chans)[2];
> > + u32 shift, offset, mux;
> > +
> > + xbar_chans = devm_kzalloc(dev,
> > + len/sizeof(s16) + 2*sizeof(s16),
> > + GFP_KERNEL);
> > + if (!xbar_chans)
> > + return -ENOMEM;
> > +
> > + ret = of_address_to_resource(node, 1, &res);
>
> of_address_to_resource() needs <linux/of_address.h>
>
> > + if (IS_ERR_VALUE(ret))
>
> This needs <linux/err.h>
>
> > + return -EIO;
> > +
> > + xbar = devm_ioremap(dev, res.start, resource_size(&res));
> > + if (!xbar)
> > + return -ENOMEM;
> > +
> > + ret = edma_of_read_u32_to_s16_array(node,
> > + "ti,edma-xbar-event-map",
> > + (s16 *)xbar_chans,
> > + len/sizeof(u32));
> > + if (IS_ERR_VALUE(ret))
> > + return -EIO;
> > +
> > + for (i = 0; xbar_chans[i][0] != -1; i++) {
> > + shift = (xbar_chans[i][1] % 4) * 8;
> > + offset = xbar_chans[i][1] >> 2;
> > + offset <<= 2;
> > + mux = readl((void *)((u32)xbar + offset));
> > + mux &= ~(0xff << shift);
> > + mux |= xbar_chans[i][0] << shift;
> > + writel(mux, (void *)((u32)xbar + offset));
> > + }
> > +
> > + pdata->xbar_chans = xbar_chans;
>
> There is no member xbar_chans ATM. It seems to be introduced in 03/10.
>
> > +
> > +static struct of_dma_filter_info edma_filter_info = {
>
> of_dma_filter_info needs <linux/of_dma.h>.
>
> > + .filter_fn = edma_filter_fn,
>
> edma_filter_fn needs <linux/edma.h>
>
> BTW, I am not sure if you really intended to introduce EDMA DT support
> in this patch. I thought 1/10 was supposed to just move EDMA private API
> to a common place. If you really want to introduce DT support as well,
> that should be noted in the description. I think it is better done in a
> later patch.
This was a complete fubared rebase for this patch. As you noticed, I
got hunks from 3/10 in there and the bisect test didn't run so it was
missed. I've got this fixed up for v8 which address all these comments
that stem from that issue.
> > diff --git a/sound/soc/davinci/davinci-sffsdr.c b/sound/soc/davinci/davinci-sffsdr.c
>
> > @@ -17,6 +17,7 @@
> > #include <linux/timer.h>
> > #include <linux/interrupt.h>
> > #include <linux/platform_device.h>
> > +#include <linux/platform_data/edma.h>
> > #include <linux/gpio.h>
> > #include <sound/core.h>
> > #include <sound/pcm.h>
> > @@ -28,12 +29,14 @@
> > #include <asm/plat-sffsdr/sffsdr-fpga.h>
> > #endif
> >
> > -#include <mach/edma.h>
> >
> > #include "../codecs/pcm3008.h"
> > #include "davinci-pcm.h"
> > #include "davinci-i2s.h"
> >
> > +#define DAVINCI_DMA_MCBSP_TX 2
> > +#define DAVINCI_DMA_MCBSP_RX 3
> > +
> > /*
> > * CLKX and CLKR are the inputs for the Sample Rate Generator.
> > * FSX and FSR are outputs, driven by the sample Rate Generator.
> > @@ -124,7 +127,7 @@ static struct resource sffsdr_snd_resources[] = {
> >
> > static struct evm_snd_platform_data sffsdr_snd_data = {
> > .tx_dma_ch = DAVINCI_DMA_MCBSP_TX,
> > - .rx_dma_ch = DAVINCI_DMA_MCBSP_RX,
>
> > + .rx_dma_ch = DAVINCI_DMA_MCBAP_RX,
>
> Typo here. Should be DAVINCI_DMA_MCBSP_RX. Unfortunately
> davinci-sffsdr.c seems to be broken already.
Ok, fixed..definitely shouldn't break it more.
-Matt